rowid,title,contents,year,author,author_slug,published,url,topic 138,Rounded Corner Boxes the CSS3 Way,"If you’ve been doing CSS for a while you’ll know that there are approximately 3,762 ways to create a rounded corner box. The simplest techniques rely on the addition of extra mark-up directly to your page, while the more complicated ones add the mark-up though DOM manipulation. While these techniques are all very interesting, they do seem somewhat of a kludge. The goal of CSS is to separate structure from presentation, yet here we are adding superfluous mark-up to our code in order to create a visual effect. The reason we are doing this is simple. CSS2.1 only allows a single background image per element. Thankfully this looks set to change with the addition of multiple background images into the CSS3 specification. With CSS3 you’ll be able to add not one, not four, but eight background images to a single element. This means you’ll be able to create all kinds of interesting effects without the need of those additional elements. While the CSS working group still seem to be arguing over the exact syntax, Dave Hyatt went ahead and implemented the currently suggested mechanism into Safari. The technique is fiendishly simple, and I think we’ll all be a lot better off once the W3C stop arguing over the details and allow browser vendors to get on and provide the tools we need to build better websites. To create a CSS3 rounded corner box, simply start with your box element and apply your 4 corner images, separated by commas. .box { background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right.gif); } We don’t want these background images to repeat, which is the normal behaviour, so lets set all their background-repeat properties to no-repeat. .box { background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right.gif); background-repeat: no-repeat, no-repeat, no-repeat, no-repeat; } Lastly, we need to define the positioning of each corner image. .box { background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right.gif); background-repeat: no-repeat, no-repeat, no-repeat, no-repeat; background-position: top left, top right, bottom left, bottom right; } And there we have it, a simple rounded corner box with no additional mark-up. As well as using multiple background images, CSS3 also has the ability to create rounded corners without the need of any images at all. You can do this by setting the border-radius property to your desired value as seen in the next example. .box { border-radius: 1.6em; } This technique currently works in Firefox/Camino and creates a nice, if somewhat jagged rounded corner. If you want to create a box that works in both Mozilla and WebKit based browsers, why not combine both techniques and see what happens.",2006,Andy Budd,andybudd,2006-12-04T00:00:00+00:00,https://24ways.org/2006/rounded-corner-boxes-the-css3-way/,code 122,"A Message To You, Rudy - CSS Production Notes","When more than one designer or developer work together on coding an XHTML/CSS template, there are several ways to make collaboration effective. Some prefer to comment their code, leaving a trail of bread-crumbs for their co-workers to follow. Others use accompanying files that contain their working notes or communicate via Basecamp. For this year’s 24ways I wanted to share a technique that I has been effective at Stuff and Nonsense; one that unfortunately did not make it into the final draft of Transcending CSS. This technique, CSS production notes, places your page production notes in one convenient place within an XHTML document and uses nothing more than meaningful markup and CSS. Let’s start with the basics; a conversation between a group of people. In the absence of notes or conversation elements in XHTML you need to make an XHTML compound that will effectively add meaning to the conversation between designers and developers. As each person speaks, you have two elements right there to describe what has been said and who has spoken:
and its cite attribute.

This project will use XHTML1.0 Strict, CSS2.1 and all that malarkey.

With more than one person speaking, you need to establish a temporal order for the conversation. Once again, the element to do just that is already there in XHTML; the humble ordered list.

  1. This project will use XHTML1.0 Strict, CSS2.1 and all that malarkey.

  2. Those bits are simple and bulletproof.

Adding a new note is as simple as adding a new item to list, and if you prefer to add more information to each note, such as the date or time that the note was written, go right ahead. Place your note list at the bottom of the source order of your document, right before the closing tag. One advantage of this approach over using conventional comments in your code is that all the notes are unobtrusive and are grouped together in one place, rather than being spread throughout your document. Basic CSS styling For the first stage you are going to add some basic styling to the notes area, starting with the ordered list. For this design I am basing the look and feel on an instant messenger window. ol#notes { width : 300px; height : 320px; padding : .5em 0; background : url(im.png) repeat; border : 1px solid #333; border-bottom-width : 2px; -moz-border-radius : 6px; /* Will not validate */ color : #000; overflow : auto; } ol#notes li { margin : .5em; padding : 10px 0 5px; background-color : #fff; border : 1px solid #666; -moz-border-radius : 6px; /* Will not validate */ } ol#notes blockquote { margin : 0; padding : 0; } ol#notes p { margin : 0 20px .75em; padding : 0; } ol#notes p.date { font-size : 92%; color : #666; text-transform : uppercase; } Take a gander at the first example. You could stop right there, but without seeing who has left the note, there is little context. So next, extract the name of the commenter from the
’s cite attribute and display it before each note by using generated content. ol#notes blockquote:before { content : "" ""attr(cite)"" said: ""; margin-left : 20px; font-weight : bold; } Fun with more detailed styling Now, with all of the information and basic styling in place, it’s time to have some fun with some more detailed styling to spruce up your notes. Let’s start by adding an icon for each person, once again based on their cite. First, all of the first paragraphs of a
’s that includes a cite attribute are given common styles. ol#notes blockquote[cite] p:first-child { min-height : 34px; padding-left : 40px; } Followed by an individual background-image. ol#notes blockquote[cite=""Andy""] p:first-child { background : url(malarkey.png) no-repeat 5px 5px; } If you prefer a little more interactivity, add a :hover state to each
and perhaps highlight the most recent comment. ol#notes blockquote:hover { background-color : #faf8eb; border-top : 1px solid #fff; border-bottom : 1px solid #333; } ol#notes li:last-child blockquote { background-color : #f1efe2; } You could also adjust the style for each comment based on the department that the person works in, for example:

  • This project will use XHTML1.0 Strict, CSS2.1 and all that malarkey.

  • Those bits are simple and bulletproof.

    • ol#notes blockquote.designer { border-color : #600; } Take a look at the results of the second stage. Show and hide the notes using CSS positioning With your notes now dressed in their finest, it is time to tuck them away above the top of your working XHTML/CSS prototype so that you can reveal them when you need them, no JavaScript required. Start by moving the ordered list of notes off the top of the viewport leaving only a few pixels in view. It is also a good idea to make them semi-transparent by using the opacity property for browsers that have implemented it. ol#notes { position : absolute; opacity : .25; z-index : 2000; top : -305px; left : 20px; } Your last step is to add :hover and :focus dynamic pseudo-classes to reposition the list at the top of the viewport and restore full opacity to display them in their full glory when needed. ol#notes:hover, ol#notes:focus { top : 0; opacity : 1; } Now it’s time to sit back, pour yourself a long drink and bask in the glory of the final result. Your notes are all stored in one handy place at the bottom of your document rather than being spread around your code. When your templates are complete, simply dive straight to the bottom and pull out the notes. A Message To You, Rudy Thank-you to everybody for making this a really great year for web standards. Have a wonderful holiday season. Buy Andy Clarke’s book Transcending CSS from Amazon.com",2006,Andy Clarke,andyclarke,2006-12-15T00:00:00+00:00,https://24ways.org/2006/css-production-notes/,process 144,"The Mobile Web, Simplified","A note from the editors: although eye-opening in 2006, this article is no longer relevant to today’s mobile web. Considering a foray into mobile web development? Following are four things you need to know before making the leap. 1. 4 billion mobile subscribers expected by 2010 Fancy that. Coupled with the UN prediction of 6.8 billion humans by 2010, 4 billion mobile subscribers (source) is an astounding 59% of the planet. Just how many of those subscribers will have data plans and web-enabled phones is still in question, but inevitably this all means one thing for you and me: A ton of potential eyes to view our web content on a mobile device. 2. Context is king Your content is of little value to users if it ignores the context in which it is viewed. Consider how you access data on your mobile device. You might be holding a bottle of water or gripping a handle on the subway/tube. You’re probably seeking specific data such as directions or show times, rather than the plethora of data at your disposal via a desktop PC. The mobile web, a phrase often used to indicate “accessing the web on a mobile device”, is very much a context-, content-, and component-specific environment. Expressed in terms of your potential target audience, access to web content on a mobile device is largely influenced by surrounding circumstances and conditions, information relevant to being mobile, and the feature set of the device being used. Ask yourself, What is relevant to my users and the tasks, problems, and needs they may encounter while being mobile? Answer that question and you’ll be off to a great start. 3. WAP 2.0 is an XHTML environment In a nutshell, here are a few fundamental tenets of mobile internet technology: Wireless Application Protocol (WAP) is the protocol for enabling mobile access to internet content. Wireless Markup Language (WML) was the language of choice for WAP 1.0. Nearly all devices sold today are WAP 2.0 devices. With the introduction of WAP 2.0, XHTML Mobile Profile (XHTML-MP) became the preferred markup language. XHTML-MP will be familiar to anyone experienced with XHTML Transitional or Strict. Summary? The mobile web is rapidly becoming an XHTML environment, and thus you and I can apply our existing “desktop web” skills to understand how to develop content for it. With WML on the decline, the learning curve is much smaller today than it was several years ago. I’m generalizing things gratuitously, but the point remains: Get off yo’ lazy butt and begin to take mobile seriously. I’ll even pass you a few tips for getting started. First, the DOCTYPE for XHTML-MP is as follows: As for MIME type, Open Mobile Alliance (OMA) specifies using the MIME type application/vnd.wap.xhtml+xml, but ultimately you need to ensure the server delivering your mobile content is configured properly for the MIME type you choose to use, as there are other options (see Setting up WAP Servers). Once you’ve made it to the body, the XHTML-MP markup is not unlike what you’re already used to. A few resources worth skimming: Developers Home XHTML-MP Tutorial – An impressively replete resource for all things XHTML-MP XHTML-MP Tags List – A complete list of XHTML-MP elements and accompanying attributes And last but certainly not least, CSS. There exists WAP CSS, which is essentially a subset of CSS2 with WAP-specific extensions. For all intents and purposes, much of the CSS you’re already comfortable using will be transferrable to mobile. As for including CSS in your pages, your options are the same as for desktop sites: external, embedded, and inline. Some experts will argue embedded or inline over external in favor of reducing the number of HTTP connections per page request, yet many popular mobilized sites and apps employ external linking without issue. Stocking stuffers: Flickr Mobile, Fandango Mobile, and Popurls Mobile. A few sites with whom you can do the View Source song and dance for further study. 4. “Cell phone” is so DynaTAC If you’re a U.S. resident, listen up: You must rid your vocabulary of the term “cell phone”. We’re one of the few economies on the planet to refer to a mobile phone accordingly. If you care to find yourself in any of the worthwhile mobile development circles, begin using terms more widely accepted: “mobile” or “mobile phone” or “handset” or “handy”. If you’re not sure which, go for “mobile”. Such as, “Yo dog, check out my new mobile.” More importantly, however, is overcoming the mentality that access to the mobile web can be done only with a phone. Instead, “device” encourages us to think phone, handheld computer, watch, Nintendo DS, car, you name it. Simple enough?",2006,Cameron Moll,cameronmoll,2006-12-19T00:00:00+00:00,https://24ways.org/2006/the-mobile-web-simplified/,ux 139,Flickr Photos On Demand with getFlickr,"In case you don’t know it yet, Flickr is great. It is a lot of fun to upload, tag and caption photos and it is really handy to get a vast network of contacts through it. Using Flickr photos outside of it is a bit of a problem though. There is a Flickr API, and you can get almost every page as an RSS feed, but in general it is a bit tricky to use Flickr photos inside your blog posts or web sites. You might not want to get into the whole API game or use a server side proxy script as you cannot retrieve RSS with Ajax because of the cross-domain security settings. However, Flickr also provides an undocumented JSON output, that can be used to hack your own solutions in JavaScript without having to use a server side script. If you enter the URL http://flickr.com/photos/tags/panda you get to the flickr page with photos tagged “panda”. If you enter the URL http://api.flickr.com/services/feeds/photos_public.gne?tags=panda&format=rss_200 you get the same page as an RSS feed. If you enter the URL http://api.flickr.com/services/feeds/photos_public.gne?tags=panda&format=json you get a JavaScript function called jsonFlickrFeed with a parameter that contains the same data in JSON format You can use this to easily hack together your own output by just providing a function with the same name. I wanted to make it easier for you, which is why I created the helper getFlickr for you to download and use. getFlickr for Non-Scripters Simply include the javascript file getflickr.js and the style getflickr.css in the head of your document: Once this is done you can add links to Flickr pages anywhere in your document, and when you give them the CSS class getflickrphotos they get turned into gallery links. When a visitor clicks these links they turn into loading messages and show a “popup” gallery with the connected photos once they were loaded. As the JSON returned is very small it won’t take long. You can close the gallery, or click any of the thumbnails to view a photo. Clicking the photo makes it disappear and go back to the thumbnails. Check out the example page and click the different gallery links to see the results. Notice that getFlickr works with Unobtrusive JavaScript as when scripting is disabled the links still get to the photos on Flickr. getFlickr for JavaScript Hackers If you want to use getFlickr with your own JavaScripts you can use its main method leech(): getFlickr.leech(sTag, sCallback); sTag the tag you are looking for sCallback an optional function to call when the data was retrieved. After you called the leech() method you have two strings to use: getFlickr.html[sTag] contains an HTML list (without the outer UL element) of all the images linked to the correct pages at flickr. The images are the medium size, you can easily change that by replacing _m.jpg with _s.jpg for thumbnails. getFlickr.tags[sTag] contains a string of all the other tags flickr users added with the tag you searched for(space separated) You can call getFlickr.leech() several times when the page has loaded to cache several result feeds before the page gets loaded. This’ll make the photos quicker for the end user to show up. If you want to offer a form for people to search for flickr photos and display them immediately you can use the following HTML:

    Tags:

    Photos:

      All the JavaScript you’ll need (for a basic display) is this: function populate(){ var tag = document.getElementById('tag').value; document.getElementById('photos').innerHTML = getFlickr.html[tag].replace(/_m\.jpg/g,'_s.jpg'); document.getElementById('tags').innerHTML = getFlickr.tags[tag]; return false; } Easy as pie, enjoy! Check out the example page and try the form to see the results.",2006,Christian Heilmann,chrisheilmann,2006-12-03T00:00:00+00:00,https://24ways.org/2006/flickr-photos-on-demand/,code 133,Gravity-Defying Page Corners,"While working on Stikkit, a “page curl” came to be. Not being as crafty as Veerle, you see. I fired up Photoshop to see what could be. “Another copy is running on the network“ … oopsie. With license issues sorted out and a concept in mind I set out to create something flexible and refined. One background image and code that is sure to be lean. A simple solution for lazy people like me. The curl I’ll be showing isn’t a curl at all. It’s simply a gradient that’s 18 pixels tall. With a fade to the left that’s diagonally aligned and a small fade on the right that keeps the illusion defined. Create a selection with the marquee tool (keeping in mind a reasonable minimum width) and drag a gradient (black to transparent) from top to bottom. Now drag a gradient (the background color of the page to transparent) from the bottom left corner to the top right corner. Finally, drag another gradient from the right edge towards the center, about 20 pixels or so. But the top is flat and can be positioned precisely just under the bottom right edge very nicely. And there it will sit, never ever to be busted by varying sizes of text when adjusted.

      Gravity-Defying!

      Lorem ipsum dolor ...

      Let’s dive into code and in the markup you’ll see “is that an extra div?” … please don’t kill me? The #page div sets the width and bottom padding whose height is equal to the shadow we’re adding. The #page-contents div will set padding in ems to scale with the text size the user intends. The background color will be added here too but not overlapping the shadow where #page’s padding makes room. A simple technique that you may find amusing is to substitute a PNG for the GIF I was using. For that would be crafty and future-proof, too. The page curl could sit on any background hue. I hope you’ve enjoyed this easy little trick. It’s hardly earth-shattering, and arguably slick. But it could come in handy, you just never know. Happy Holidays! And pleasant dreams of web three point oh.",2006,Dan Cederholm,dancederholm,2006-12-24T00:00:00+00:00,https://24ways.org/2006/gravity-defying-page-corners/,design 134,Photographic Palettes,"How many times have you seen a colour combination that just worked, a match so perfect that it just seems obvious? Now, how many times do you come up with those in your own work? A perfect palette looks easy when it’s done right, but it’s often maddeningly difficult and time-consuming to accomplish. Choosing effective colour schemes will always be more art than science, but there are things you can do that will make coming up with that oh-so-smooth palette just a little a bit easier. A simple trick that can lead to incredibly gratifying results lies in finding a strong photograph and sampling out particularly harmonious colours. Photo Selection Not all photos are created equal. You certainly want to start with imagery that fits the eventual tone you’re attempting to create. A well-lit photo of flowers might lead to a poor colour scheme for a funeral parlour’s web site, for example. It’s worth thinking about what you’re trying to say in advance, and finding a photo that lends itself to your message. As a general rule of thumb, photos that have a lot of neutral or de-saturated tones with one or two strong colours make for the best palette; bright and multi-coloured photos are harder to derive pleasing results from. Let’s start with a relatively neutral image. Sampling In the above example, I’ve surrounded the photo with three different background colours directly sampled from the photo itself. Moving from left to right, you can see how each of the sampled colours is from an area of increasingly smaller coverage within the photo, and yet there’s still a strong harmony between the photo and the background image. I don’t really need to pick the big obvious colours from the photo to create that match, I can easily concentrate on more interesting colours that might work better for what I intend. Using a similar palette, let’s apply those colour choices to a more interesting layout: In this mini-layout, I’ve re-used the same tan colour from the previous middle image as a background, and sampled out a nicely matching colour for the top and bottom overlays, as well as the two different text colours. Because these colours all fall within a narrow range, the overall balance is harmonious. What if I want to try something a little more daring? I have a photo of stacked chairs of all different colours, and I’d like to use a few more of those. No problem, provided I watch my colour contrast: Though it uses varying shades of red, green, and yellow, this palette actually works because the values are even, and the colours muted. Placing red on top of green is usually a hideous combination of death, but if the green is drab enough and the red contrasts well enough, the result can actually be quite pleasing. I’ve chosen red as my loudest colour in this palette, and left green and yellow to play the quiet supporting roles. Obviously, there are no hard and fast rules here. You might not want to sample absolutely every colour in your scheme from a photo. There are times where you’ll need a variation that’s just a little bit lighter, or a blue that’s not in the photo. You might decide to start from a photo base and tweak, or add in colours of your own. That’s okay too. Tonal Variations I’ll leave you with a final trick I’ve been using lately, a way to bring a bit more of a formula into the equation and save some steps. Starting with the same base palette I sampled from the chairs, in the above image I’ve added a pair of overlaying squares that produce tonal variations of each primary. The lighter variation is simply a solid white square set to 40% opacity, the darker one is a black square at 20%. That gives me a highlight and shadow for each colour, which would prove handy if I had to adapt this colour scheme to a larger layout. I could add a few more squares of varying opacities, or adjust the layer blending modes for different effects, but as this looks like a great place to end, I’ll leave that up to your experimental whims. Happy colouring!",2006,Dave Shea,daveshea,2006-12-22T00:00:00+00:00,https://24ways.org/2006/photographic-palettes/,design 135,A Scripting Carol,"We all know the stories of the Ghost of Scripting Past – a time when the web was young and littered with nefarious scripting, designed to bestow ultimate control upon the developer, to pollute markup with event handler after event handler, and to entrench advertising in the minds of all that gazed upon her. And so it came to be that JavaScript became a dirty word, thrown out of solutions by many a Scrooge without regard to the enhancements that JavaScript could bring to any web page. JavaScript, as it was, was dead as a door-nail. With the arrival of our core philosophy that all standardistas hold to be true: “separate your concerns – content, presentation and behaviour,” we are in a new era of responsible development the Web Standards Way™. Or are we? Have we learned from the Ghosts of Scripting Past? Or are we now faced with new problems that come with new ways of implementing our solutions? The Ghost of Scripting Past If the Ghost of Scripting Past were with us it would probably say: You must remember your roots and where you came from, and realize the misguided nature of your early attempts for control. That person you see down there, is real and they are the reason you exist in the first place… without them, you are nothing. In many ways we’ve moved beyond the era of control and we do take into account the user, or at least much more so than we used to. Sadly – there is one advantage that old school inline event handlers had where we assigned and reassigned CSS style property values on the fly – we knew that if JavaScript wasn’t supported, the styles wouldn’t be added because we ended up doing them at the same time. If anything, we need to have learned from the past that just because it works for us doesn’t mean it is going to work for anyone else – we need to test more scenarios than ever to observe the multitude of browsing arrangements we’ll observe: CSS on with JavaScript off, CSS off/overridden with JavaScript on, both on, both off/not supported. It is a situation that is ripe for conflict. This may shock some of you, but there was a time when testing was actually easier: back in the day when Netscape 4 was king. Yes, that’s right. I actually kind of enjoyed Netscape 4 (hear me out, please). With NS4’s CSS implementation known as JavaScript Style Sheets, you knew that if JavaScript was off the styles were off too. The Ghost of Scripting Present With current best practice – we keep our CSS and JavaScript separate from each other. So what happens when some of our fancy, unobtrusive DOM Scripting doesn’t play nicely with our wonderfully defined style rules? Lets look at one example of a collapsing and expanding menu to illustrate where we are now: Simple Collapsing/Expanding Menu Example We’re using some simple JavaScript (I’m using jquery in this case) to toggle between a CSS state for expanded and not expanded: JavaScript $(document).ready(function(){ TWOFOURWAYS.enableTree(); }); var TWOFOURWAYS = new Object(); TWOFOURWAYS.enableTree = function () { $(""ul li a"").toggle(function(){ $(this.parentNode).addClass(""expanded""); }, function() { $(this.parentNode).removeClass(""expanded""); }); return false; } CSS ul li ul { display: none; } ul li.expanded ul { display: block; } At this point we’ve separated our presentation from our content and behaviour, and all is well, right? Not quite. Here’s where I typically see failures in the assessment work that I do on web sites and applications (Yes, call me Scrooge – I don’t care!). We know our page needs to work with or without scripting, and we know it needs to work with or without CSS. All too often the testing scenarios don’t take into account combinations. Testing it out So what happens when we test this? Make sure you test with: CSS off JavaScript off Use the simple example again. With CSS off, we revert to a simple nested list of links and all functionality is maintained. With JavaScript off, however, we run into a problem – we have now removed the ability to expand the menu using the JavaScript triggered CSS change. Hopefully you see the problem – we have a JavaScript and CSS dependency that is critical to the functionality of the page. Unobtrusive scripting and binary on/off tests aren’t enough. We need more. This Ghost of Scripting Present sighting is seen all too often. Lets examine the JavaScript off scenario a bit further – if we require JavaScript to expand/show the branch of the tree we should use JavaScript to hide them in the first place. That way we guarantee functionality in all scenarios, and have achieved our baseline level of interoperability. To revise this then, we’ll start with the sub items expanded, use JavaScript to collapse them, and then use the same JavaScript to expand them. HTML CSS /* initial style is expanded */ ul li ul.collapseme { display: block; } JavaScript // remove the class collapseme after the page loads $(""ul ul.collapseme"").removeClass(""collapseme""); And there you have it – a revised example with better interoperability. This isn’t rocket surgery by any means. It is a simple solution to a ghostly problem that is too easily overlooked (and often is). The Ghost of Scripting Future Well, I’m not so sure about this one, but I’m guessing that in a few years’ time, we’ll all have seen a few more apparitions and have a few more tales to tell. And hopefully we’ll be able to share them on 24 ways. Thanks to Drew for the invitation to contribute and thanks to everyone else out there for making this a great (and haunting) year on the web!",2006,Derek Featherstone,derekfeatherstone,2006-12-21T00:00:00+00:00,https://24ways.org/2006/a-scripting-carol/,code 124,Writing Responsible JavaScript,"Without a doubt, JavaScript has been making something of a comeback in the last year. If you’re involved in client-side development in any way at all, chances are that you’re finding yourself writing more JavaScript now than you have in a long time. If you learned most of your JavaScript back when DHTML was all the rage and before DOM Scripting was in vogue, there have been some big shifts in the way scripts are written. Most of these are in the way event handlers are assigned and functions declared. Both of these changes are driven by the desire to write scripts that are responsible page citizens, both in not tying behaviour to content and in taking care not to conflict with other scripts. I thought it may be useful to look at some of these more responsible approaches to learn how to best write scripts that are independent of the page content and are safely portable between different applications. Event Handling Back in the heady days of Web 1.0, if you wanted to have an object on the page react to something like a click, you would simply go ahead and attach an onclick attribute. This was easy and understandable, but much like the font tag or the style attribute, it has the downside of mixing behaviour or presentation in with our content. As we’re learned with CSS, there are big benefits in keeping those layers separate. Hey, if it works for CSS, it should work for JavaScript too. Just like with CSS, instead of adding an attribute to our element within the document, the more responsible way to do that is to look for the item from your script (like CSS does with a selector) and then assign the behaviour to it. To give an example, take this oldskool onclick use case: Play the animation This could be rewritten by removing the onclick attribute, and instead doing the following from within your JavaScript. document.getElementById('anim-link').onclick = playAnimation; It’s all in the timing Of course, it’s never quite that easy. To be able to attach that onclick, the element you’re targeting has to exist in the page, and the page has to have finished loading for the DOM to be available. This is where the onload event is handy, as it fires once everything has finished loading. Common practise is to have a function called something like init() (short for initialise) that sets up all these event handlers as soon as the page is ready. Back in the day we would have used the onload attibute on the element to do this, but of course what we really want is: window.onload = init; As an interesting side note, we’re using init here rather than init() so that the function is assigned to the event. If we used the parentheses, the init function would have been run at that moment, and the result of running the function (rather than the function itself) would be assigned to the event. Subtle, but important. As is becoming apparent, nothing is ever simple, and we can’t just go around assigning our initialisation function to window.onload. What if we’re using other scripts in the page that might also want to listen out for that event? Whichever script got there last would overwrite everything that came before it. To manage this, we need a script that checks for any existing event handlers, and adds the new handler to it. Most of the JavaScript libraries have their own systems for doing this. If you’re not using a library, Simon Willison has a good stand-alone example function addLoadEvent(func) { var oldonload = window.onload; if (typeof window.onload != 'function') { window.onload = func; } else { window.onload = function() { if (oldonload) { oldonload(); } func(); } } } Obviously this is just a toe in the events model’s complex waters. Some good further reading is PPK’s Introduction to Events. Carving out your own space Another problem that rears its ugly head when combining multiple scripts on a single page is that of making sure that the scripts don’t conflict. One big part of that is ensuring that no two scripts are trying to create functions or variables with the same names. Reusing a name in JavaScript just over-writes whatever was there before it. When you create a function in JavaScript, you’ll be familiar with doing something like this. function foo() { ... goodness ... } This is actually just creating a variable called foo and assigning a function to it. It’s essentially the same as the following. var foo = function() { ... goodness ... } This name foo is by default created in what’s known as the ‘global namespace’ – the general pool of variables within the page. You can quickly see that if two scripts use foo as a name, they will conflict because they’re both creating those variables in the global namespace. A good solution to this problem is to add just one name into the global namespace, make that one item either a function or an object, and then add everything else you need inside that. This takes advantage of JavaScript’s variable scoping to contain you mess and stop it interfering with anyone else. Creating An Object Say I was wanting to write a bunch of functions specifically for using on a site called ‘Foo Online’. I’d want to create my own object with a name I think is likely to be unique to me. var FOOONLINE = {}; We can then start assigning functions are variables to it like so: FOOONLINE.message = 'Merry Christmas!'; FOOONLINE.showMessage = function() { alert(this.message); }; Calling FOOONLINE.showMessage() in this example would alert out our seasonal greeting. The exact same thing could also be expressed in the following way, using the object literal syntax. var FOOONLINE = { message: 'Merry Christmas!', showMessage: function() { alert(this.message); } }; Creating A Function to Create An Object We can extend this idea bit further by using a function that we run in place to return an object. The end result is the same, but this time we can use closures to give us something like private methods and properties of our object. var FOOONLINE = function(){ var message = 'Merry Christmas!'; return { showMessage: function(){ alert(message); } } }(); There are two important things to note here. The first is the parentheses at the end of line 10. Just as we saw earlier, this runs the function in place and causes its result to be assigned. In this case the result of our function is the object that is returned at line 4. The second important thing to note is the use of the var keyword on line 2. This ensures that the message variable is created inside the scope of the function and not in the global namespace. Because of the way closure works (which if you’re not familiar with, just suspend your disbelief for a moment) that message variable is visible to everything inside the function but not outside. Trying to read FOOONLINE.message from the page would return undefined. This is useful for simulating the concept of private class methods and properties that exist in other programming languages. I like to take the approach of making everything private unless I know it’s going to be needed from outside, as it makes the interface into your code a lot clearer for someone else to read. All Change, Please So that was just a whistle-stop tour of a couple of the bigger changes that can help to make your scripts better page citizens. I hope it makes useful Sunday reading, but obviously this is only the tip of the iceberg when it comes to designing modular, reusable code. For some, this is all familiar ground already. If that’s the case, I encourage you to perhaps submit a comment with any useful resources you’ve found that might help others get up to speed. Ultimately it’s in all of our interests to make sure that all our JavaScript interoperates well – share your tips.",2006,Drew McLellan,drewmclellan,2006-12-10T00:00:00+00:00,https://24ways.org/2006/writing-responsible-javascript/,code 132,Tasty Text Trimmer,"In most cases, when designing a user interface it’s best to make a decision about how data is best displayed and stick with it. Failing to make a decision ultimately leads to too many user options, which in turn can be taxing on the poor old user. Under some circumstances, however, it’s good to give the user freedom in customising their workspace. One good example of this is the ‘Article Length’ tool in Apple’s Safari RSS reader. Sliding a slider left of right dynamically changes the length of each article shown. It’s that kind of awesomey magic stuff that’s enough to keep you from sleeping. Let’s build one. The Setup Let’s take a page that has lots of long text items, a bit like a news page or like Safari’s RSS items view. If we were to attach a class name to each element we wanted to resize, that would give us something to hook onto from the JavaScript. Example 1: The basic page. As you can see, I’ve wrapped my items in a DIV and added a class name of chunk to them. It’s these chunks that we’ll be finding with the JavaScript. Speaking of which … Our Core Functions There are two main tasks that need performing in our script. The first is to find the chunks we’re going to be resizing and store their original contents away somewhere safe. We’ll need this so that if we trim the text down we’ll know what it was if the user decides they want it back again. We’ll call this loadChunks. var loadChunks = function(){ var everything = document.getElementsByTagName('*'); var i, l; chunks = []; for (i=0, l=everything.length; i -1){ chunks.push({ ref: everything[i], original: everything[i].innerHTML }); } } }; The variable chunks is stored outside of this function so that we can access it from our next core function, which is doTrim. var doTrim = function(interval) { if (!chunks) loadChunks(); var i, l; for (i=0, l=chunks.length; i instruction, as can been seen on Line 2 below. This instructs the browser to use the XSL file to transform the document. Your first transformation Your first XSL will look something like this: This is pretty much the starting point for most XSL files. You will notice the standard XML processing instruction at the top of the file (line 1). We then switch into XSL mode using the XSL namespace on all XSL elements (line 2). In this case, we have added namespaces for ATOM (line 4) and Dublin Core (line 5). This means the XSL can now read and understand those elements from the source XML. After we define all the namespaces, we then move onto the xsl:output element (line 6). This enables you to define the final method of output. Here we’re specifying html, but you could equally use XML or Text, for example. The encoding attributes on each element do what they say on the tin. As with all XML, of course, we close every element including the root. The next stage is to add a template, in this case an as can be seen below: Making XML beautiful again : Transforming ATOM The beautiful thing about XSL is its English syntax, if you say it out loud it tends to make sense. The / value for the match attribute on line 8 is our first example of XPath syntax. The expression / matches any element – so this will match against any element in the document. As the first element in any XML document is the root element, this will be the one matched and processed first. Once we get past our standard start of a HTML document, the only instruction remaining in this is to look for and match all elements using the in line 14, above.

      This new template (line 12, above) matches and starts to write the new HTML elements out to the output stream. The does exactly what you’d expect – it finds the value of the item specifed in its select attribute. With XPath you can select any element or attribute from the source XML. The last part is a repeat of the now familiar from before, but this time we’re using it inside of a called template. Yep, XSL is full of recursion…

    • ()

      • The which matches atom:entry (line 1) occurs every time there is a element in the source XML file. So in total that is 20 times, this is naturally why XSLT is full of recursion. This has been matched and therefore called higher up in the document, so we can start writing list elements directly to the output stream. The first part is simply a

      with a link wrapped within it (lines 3-7). We can select attributes using XPath using @. The second part of this template selects the date, but performs a XPath string function on it. This means that we only get the date and not the time from the string (line 9). This is achieved by getting only the part of the string that exists before the T. Regular Expressions are not part of the XPath 1.0 string functions, although XPath 2.0 does include them. Because of this, in XSL we tend to rely heavily on the available XML output. The third part of the template (line 12) is a again, but this time we use an attribute of called disable output escaping to turn escaped characters back into XML. The very last section is another call, taking us three templates deep. Do not worry, it is not uncommon to write XSL which go 20 or more templates deep! tag In our final , we see a combination of what we have done before with a couple of twists. Once we match atom:category we then count how many elements there are at that same level (line 2). The XPath . means ‘self’, so we count how many category elements are within the element. Following that, we start to output a link with a rel attribute of the predefined text, tag (lines 4-6). In XSL you can just type text, but results can end up with strange whitespace if you do (although there are ways to simply remove all whitespace). The only new XPath function in this example is concat(), which simply combines what XPaths or text there might be in the brackets. We end the output for this tag with an actual tag name (line 10) and we add a space afterwards (line 12) so it won’t touch the next tag. (There are better ways to do this in XSL using the last() XPath function). After that, we go back to the element again if there is another category element, otherwise we end the loop and end this . A touch of style Because we’re using recursion through our templates, you will find this is the end of the templates and the rest of the XML will be ignored by the parser. Finally, we can add our CSS to finish up. (I have created one for Flickr and another for News feeds) So we end up with a nice simple to understand but also quick to write XSL which can be used on ATOM Flickr feeds and ATOM News feeds. With a little playing around with XSL, you can make XML beautiful again. All the files can be found in the zip file (14k)",2006,Ian Forrester,ianforrester,2006-12-07T00:00:00+00:00,https://24ways.org/2006/beautiful-xml-with-xsl/,code 142,Revealing Relationships Can Be Good Form,"A few days ago, a colleague of mine – someone I have known for several years, who has been doing web design for several years and harks back from the early days of ZDNet – was running through a prototype I had put together for some user testing. As with a lot of prototypes, there was an element of ‘smoke and mirrors’ to make things look like they were working. One part of the form included a yes/no radio button, and selecting the Yes option would, in the real and final version of the form, reveal some extra content. Rather than put too much JavaScript in the prototype, I took a preverbial shortcut and created a link which I wrapped around the text next to the radio button – clicking on that link would cause the form to mimic a change event on the radio button. But it wasn’t working for him. Why was that? Because whereas I created the form using a