{"rowid": 329, "title": "Broader Border Corners", "contents": "A note from the editors:  Since this article was written the CSS border-radius property has become widely supported in browsers. It should be preferred to this image technique.\n                \n                \n                      \n                A quick and easy recipe for turning those single-pixel borders that the kids love so much into  into something a little less right-angled.\n\nHere\u2019s the principle: We have a box with a one-pixel wide border around it. Inside that box is another box that has a little rounded-corner background image sitting snugly in one of its corners. The inner-box is then nudged out a bit so that it\u2019s actually sitting on top of the outer box. If it\u2019s all done properly, that little background image can mask the hard right angle of the default border of the outer-box, giving the impression that it actually has a rounded corner.\n\nTake An Image, Finely Chopped\n\n\n\nAdd A Sprinkle of Markup\n\n<div id=\"content\">\n    <p>Lorem ipsum etc. etc. etc.</p>\n</div>\n\nThrow In A Dollop of CSS\n\n#content { \n     border: 1px solid #c03;\n}\n\n#content p {\n     background: url(corner.gif) top left no-repeat;\n     position: relative;\n     left: -1px;\n     top: -1px;\n     padding: 1em;\n     margin: 0;\n}\n\nBubblin\u2019 Hot\n\n\n\tThe content div has a one-pixel wide red border around it.\n\tThe paragraph is given a single instance of the background image, created to look like a one-pixel wide arc.\n\tThe paragraph is shunted outside of the box \u2013 back one pixel and up one pixel \u2013 so that it is sitting over the div\u2019s border. The white area of the image covers up that part of the border\u2019s corner, and the arc meets up with the top and left border.\n\tBecause, in this example, we\u2019re applying a background image to a paragraph, its top margin needs to be zeroed so that it starts at the top of its container.\n\n\nEt voil\u00e0. Bon app\u00e9tit.\n\nExtra Toppings\n\n\n\tIf you want to apply a curve to each one of the corners and you run out of meaningful markup to hook the background images on to, throw some spans or divs in the mix (there\u2019s nothing wrong with this if that\u2019s the effect you truly want \u2013 they don\u2019t hurt anybody) or use some nifty DOM Scripting to put the scaffolding in for you.\n\tNote that if you\u2019ve got more than one of these relative corners, you will need to compensate for the starting position of each box which is nested in an already nudged parent.\n\tYou\u2019re not limited to one pixel wide, rounded corners \u2013 the same principles apply to thicker borders, or corners with different shapes.", "year": "2005", "author": "Patrick Griffiths", "author_slug": "patrickgriffiths", "published": "2005-12-14T00:00:00+00:00", "url": "https://24ways.org/2005/broader-border-corners/", "topic": "design"}
{"rowid": 324, "title": "Debugging CSS with the DOM Inspector", "contents": "An Inspector Calls\n\nThe larger your site and your CSS becomes, the more likely that you will run into bizarre, inexplicable problems. Why does that heading have all that extra padding? Why is my text the wrong colour? Why does my navigation have a large moose dressed as Noel Coward on top of all the links? \n\nPerhaps you work in a collaborative environment, where developers and other designers are adding code? In which case, the likelihood of CSS strangeness is higher.\n\nYou need to debug. You need Firefox\u2019s wise-guy know-it-all, the DOM Inspector. \n\nThe DOM Inspector knows where everything is in your layout, and more importantly, what causes it to look the way it does. So without further ado, load up any css based site in your copy of Firefox (or Flock for that matter), and launch the DOM Inspector from the Tools menu.\n\nThe inspector uses two main panels \u2013 the left to show the DOM tree of the page, and the right to show you detail:\n\n\n\nThe Inspector will look at whatever site is in the front-most window or tab, but you can also use it without another window. Type in a URL at the top (A), press \u2018Inspect\u2019 (B) and a third panel appears at the bottom, with the browser view. I find this layout handier than looking at a window behind the DOM Inspector.\n\nStep 1 \u2013 find your node!\n\nEach element on your page \u2013 be it a HTML tag or a piece of text, is called a \u2018node\u2019 of the DOM tree. These nodes are all listed in the left hand panel, with any ID or CLASS attribute values next to them.  When you first look at a page, you won\u2019t see all those yet. Nested HTML elements (such as a link inside a paragraph) have a reveal triangle next to their name, clicking this takes you one level further down. \n\nThis can be fine for finding the node you want to look at, but there are easier ways. Say you have a complex rounded box technique that involves 6 nested DIVs? You\u2019d soon get tired of clicking all those triangles to find the element you want to inspect. Click the top left icon \u00a9 \u2013 \u201cFind a node to inspect by clicking on it\u201d and then select the area you want to inspect. Boom! All that drilling down the DOM tree has been done for you! Huzzah!\n\nIf you\u2019re looking for an element that you know has an ID (such as <ul id=\"navigation\">), or a specific HTML tag or attribute, click the binoculars icon (D) for \u201cFinds a node to inspect by ID, tag or attribute\u201d (You can also use Ctrl-F or Apple-F to do this if the DOM Inspector is the frontmost window) :\n\n\n\nType in the name and Bam! You\u2019re there! Pressing F3 will take you to any other instances. Notice also, that when you click on a node in the inspector, it highlights where it is in the browser view with a flashing red border!\n\nNow that we\u2019ve found the troublesome node on the page, we can find out what\u2019s up with it\u2026\n\nStep 2 \u2013 Debug that node!\n\nOnce the node is selected, we move over to the right hand panel. Choose \u2018CSS Style Rules\u2019 from the document menu (E), and all the CSS rules that apply to that node are revealed, in the order that they load:\n\n\n\nYou\u2019ll notice that right at the top, there is a CSS file you might not recognise, with a file path beginning with \u201cresource://\u201d. This is the browsers default CSS, that creates the basic rendering. You can mostly ignore this, especially if use the star selector method of resetting default browser styles. \n\nYour style sheets come next. See how helpful it is? It even tells you the line number where to find the related CSS rules! If you use CSS shorthand, you\u2019ll notice that the values are split up (e.g margin-left, margin-right etc.). \n\nNow that you can see all the style rules affecting that node, the rest is up to you! Happy debugging!", "year": "2005", "author": "Jon Hicks", "author_slug": "jonhicks", "published": "2005-12-22T00:00:00+00:00", "url": "https://24ways.org/2005/debugging-css-with-the-dom-inspector/", "topic": "process"}
{"rowid": 331, "title": "Splintered Striper", "contents": "Back in March 2004, David F. Miller demonstrated a little bit of DOM scripting magic in his A List Apart article Zebra Tables.\n\nHis script programmatically adds two alternating CSS background colours to table rows, making them more readable and visually pleasing, while saving the document author the tedious task of manually assigning the styling to large static data tables.\n\nAlthough David\u2019s original script performs its duty well, it is nonetheless very specific and limited in its application. It only:\n\n\n\tworks on a single table, identified by its id, with at least a single tbody section\n\tassigns a background colour\n\tallows two colours for odd and even rows\n\tacts on data cells, rather than rows, and then only if they have no class or background colour already defined\n\n\nTaking it further\n\nIn a recent project I found myself needing to apply a striped effect to a medium sized unordered list. Instead of simply modifying the Zebra Tables code for this particular case, I decided to completely recode the script to make it more generic.\n\nBeing more general purpose, the function in my splintered striper experiment is necessarily more complex. Where the original script only expected a single parameter (the id of the target table), the new function is called as follows:\n\nstriper('[parent element tag]','[parent element class or null]','[child element tag]','[comma separated list of classes]')\n\nThis new, fairly self-explanatory function:\n\n\n\ttargets any type of parent element (and, if specified, only those with a certain class)\n\tassigns two or more classes (rather than just two background colours) to the child elements inside the parent\n\tpreserves any existing classes already assigned to the child elements\n\n\nSee it in action\n\nView the demonstration page for three usage examples. For simplicity\u2019s sake, we\u2019re making the calls to the striper function from the body\u2019s onload attribute. In a real deployment situation, we would look at attaching a behaviour to the onload programmatically \u2014 just remember that, as we need to pass variables to the striper function, this would involve creating a wrapper function which would then be attached\u2026something like:\n\nfunction stripe() {\n    striper('tbody','splintered','tr','odd,even');\n}\n\nwindow.onload=stripe;\n\nA final thought\n\nJust because the function is called striper does not mean that it\u2019s limited to purely applying a striped look; as it\u2019s more of a general purpose \u201calternating class assignment\u201d script, you can achieve a whole variety of effects with it.", "year": "2005", "author": "Patrick Lauke", "author_slug": "patricklauke", "published": "2005-12-15T00:00:00+00:00", "url": "https://24ways.org/2005/splintered-striper/", "topic": "code"}
{"rowid": 319, "title": "Avoiding CSS Hacks for Internet Explorer", "contents": "Back in October, IEBlog issued a call to action, asking developers to clean up their CSS hacks for IE7 testing. Needless to say, a lot of hubbub ensued\u2026 both on IEBlog and elsewhere. My contribution to all of the noise was to suggest that developers review their code and use good CSS hacks. But what makes a good hack?\n\nTantek \u00c7elik, the Godfather of CSS hacks, gave us the answer by explaining how CSS hacks should be designed. In short, they should (1) be valid, (2) target only old/frozen/abandoned user-agents/browsers, and (3) be ugly. Tantek also went on to explain that using a feature of CSS is not a hack.\n\nNow, I\u2019m not a frequent user of CSS hacks, but Tantek\u2019s post made sense to me. In particular, I felt it gave developers direction on how we should be coding to accommodate that sometimes troublesome browser, Internet Explorer. But what I\u2019ve found, through my work with other developers, is that there is still much confusion over the use of CSS hacks and IE. Using examples from the code I\u2019ve seen recently, allow me to demonstrate how to clean up some IE-specific CSS hacks.\n\nThe two hacks that I\u2019ve found most often in the code I\u2019ve seen and worked with are the star html bug and the underscore hack. We know these are both IE-specific by checking Kevin Smith\u2019s CSS Filters chart. Let\u2019s look at each of these hacks and see how we can replace them with the same CSS feature-based solution.\n\nThe star html bug\n\nThis hack violates Tantek\u2019s second rule as it targets current (and future) UAs. I\u2019ve seen this both as a stand alone rule, as well as an override to some other rule in a style sheet. Here are some code samples:\n\n* html div#header {margin-top:-3px;}\n.promo h3 {min-height:21px;}\n* html .promo h3 {height:21px;}\n\nThe underscore hack\n\nThis hack violates Tantek\u2019s first two rules: it\u2019s invalid (according to the W3C CSS Validator) and it targets current UAs. Here\u2019s an example:\n\nol {padding:0; _padding-left:5px;}\n\nUsing child selectors\n\nWe can use the child selector to replace both the star html bug and underscore hack. Here\u2019s how:\n\n Write rules with selectors that would be successfully applied to all browsers. This may mean starting with no declarations in your rule!\n\ndiv#header {}\n.promo h3 {}\nol {padding:0;}\n\n \nTo these rules, add the IE-specific declarations.\n\ndiv#header {margin-top:-3px;}\n.promo h3 {height:21px;}\nol {padding:0 0 0 5px;}\n\n \nAfter each rule, add a second rule. The selector of the second rule must use a child selector. In this new rule, correct any IE-specific declarations previously made.\n\ndiv#header {margin-top:-3px;}\nbody > div#header {margin-top:0;}\n\n.promo h3 {height:21px;}\n.promo > h3 {height:auto; min-height:21px;}\n\nol {padding:0 0 0 5px;}\nhtml > body ol {padding:0;}\n\n \n\nVoil\u00e0 \u2013 no more hacks! There are a few caveats to this that I won\u2019t go into\u2026 but assuming you\u2019re operating in strict mode and barring any really complicated stuff you\u2019re doing in your code, your CSS will still render perfectly across browsers. And while this may make your CSS slightly heftier in size, it should future-proof it for IE7 (or so I hope). Happy holidays!", "year": "2005", "author": "Kimberly Blessing", "author_slug": "kimberlyblessing", "published": "2005-12-17T00:00:00+00:00", "url": "https://24ways.org/2005/avoiding-css-hacks-for-internet-explorer/", "topic": "code"}
{"rowid": 315, "title": "Edit-in-Place with Ajax", "contents": "Back on day one we looked at using the Prototype library to take all the hard work out of making a simple Ajax call. While that was fun and all, it didn\u2019t go that far towards implementing something really practical. We dipped our toes in, but haven\u2019t learned to swim yet.\n\nSo here is swimming lesson number one. Anyone who\u2019s used Flickr to publish their photos will be familiar with the edit-in-place system used for quickly amending titles and descriptions on photographs. Hovering over an item turns its background yellow to indicate it is editable. A simple click loads the text into an edit box, right there on the page.\n\n\n\nPrototype includes all sorts of useful methods to help reproduce something like this for our own projects. As well as the simple Ajax GETs we learned how to do last time, we can also do POSTs (which we\u2019ll need here) and a whole bunch of manipulations to the user interface \u2013 all through simple library calls. Here\u2019s what we\u2019re building, so let\u2019s do it.\n\nGetting Started\n\nThere are two major components to this process; the user interface manipulation and the Ajax call itself. Our set-up is much the same as last time (you may wish to read the first article if you\u2019ve not already done so). We have a basic HTML page which links in the prototype.js file and our own editinplace.js. Here\u2019s what Santa dropped down my chimney: \n\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Strict//EN\"\n     \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd\">\n <html xmlns=\"http://www.w3.org/1999/xhtml\" xml:lang=\"en\" lang=\"en\">\n <head>\n     <meta http-equiv=\"Content-Type\" content=\"text/html; charset=utf-8\"/>\n    <title>Edit-in-Place with Ajax</title>\n     <link href=\"editinplace.css\" rel=\"Stylesheet\" type=\"text/css\" />\n     <script src=\"prototype.js\" type=\"text/javascript\"></script>\n     <script src=\"editinplace.js\" type=\"text/javascript\"></script>    \n</head> \n<body>\n     <h1>Edit-in-place</h1>\n     <p id=\"desc\">Dashing through the snow on a one horse open sleigh.</p>\n </body>\n </html>\n\nSo that\u2019s our page. The editable item is going to be the <p> called desc. The process goes something like this:\n\n\n\tHighlight the area onMouseOver\n\tClear the highlight onMouseOut\n\tIf the user clicks, hide the area and replace with a <textarea> and buttons\n\tRemove all of the above if the user cancels the operation\n\tWhen the Save button is clicked, make an Ajax POST and show that something\u2019s happening\n\tWhen the Ajax call comes back, update the page with the new content\n\n\nEvents and Highlighting\n\nThe first step is to offer feedback to the user that the item is editable. This is done by shading the background colour when the user mouses over. Of course, the CSS :hover pseudo class is a straightforward way to do this, but for three reasons, I\u2019m using JavaScript to switch class names.\n\n\n\t:hover isn\u2019t supported on many elements in Internet Explorer for Windows\n\tI want to keep control over when the highlight switches off after an update, regardless of mouse position\n\tIf JavaScript isn\u2019t available we don\u2019t want to end up with the CSS suggesting it might be\n\n\nWith this in mind, here\u2019s how editinplace.js starts:\n\nEvent.observe(window, 'load', init, false);\n\n function init(){\n     makeEditable('desc');\n }\n\n function makeEditable(id){\n     Event.observe(id, 'click', function(){edit($(id))}, false);\n     Event.observe(id, 'mouseover', function(){showAsEditable($(id))}, false);\n     Event.observe(id, 'mouseout', function(){showAsEditable($(id), true)}, false);\n }\n\n function showAsEditable(obj, clear){\n     if (!clear){\n          Element.addClassName(obj, 'editable');\n     }else{\n          Element.removeClassName(obj, 'editable');\n     }\n }\n\nThe first line attaches an onLoad event to the window, so that the function init() gets called once the page has loaded. In turn, init() sets up all the items on the page that we want to make editable. In this example I\u2019ve just got one, but you can add as many as you like.\n\nThe function madeEditable() attaches the mouseover, mouseout and click events to the item we\u2019re making editable. All showAsEditable does is add and remove the class name editable from the object. This uses the particularly cunning methods Element.addClassName() and Element.removeClassName() which enable you to cleanly add and remove effects without affecting any styling the object may otherwise have.\n\nOh, remember to add a rule for .editable to your style sheet:\n\n.editable{\n     color: #000;\n     background-color: #ffffd3;\n }\n\nThe Switch\n\nAs you can see above, when the user clicks on an editable item, a call is made to the function edit(). This is where we switch out the static item for a nice editable textarea. Here\u2019s how that function looks.\n\nfunction edit(obj){\n     Element.hide(obj);\n\n     var textarea ='<div id=\"' + obj.id + '_editor\">\n          <textarea id=\"' + obj.id + '_edit\" name=\"' + obj.id + '\" rows=\"4\" cols=\"60\">'\n          + obj.innerHTML + '</textarea>';\n\n     var button = '<input id=\"' + obj.id + '_save\" type=\"button\" value=\"SAVE\" /> OR \n          <input id=\"' + obj.id + '_cancel\" type=\"button\" value=\"CANCEL\" /></div>';\n\n     new Insertion.After(obj, textarea+button);\n\n     Event.observe(obj.id+'_save', 'click', function(){saveChanges(obj)}, false);\n     Event.observe(obj.id+'_cancel', 'click', function(){cleanUp(obj)}, false);\n\n }\n\nThe first thing to do is to hide the object. Prototype comes to the rescue with Element.hide() (and of course, Element.show() too). Following that, we build up the textarea and buttons as a string, and then use Insertion.After() to place our new editor underneath the (now hidden) editable object.\n\nThe last thing to do before we leave the user to edit is it attach listeners to the Save and Cancel buttons to call either the saveChanges() function, or to cleanUp() after a cancel.\n\nIn the event of a cancel, we can clean up behind ourselves like so:\n\nfunction cleanUp(obj, keepEditable){\n     Element.remove(obj.id+'_editor');\n     Element.show(obj);\n     if (!keepEditable) showAsEditable(obj, true);\n }\n\nSaving the Changes\n\nThis is where all the Ajax fun occurs. Whilst the previous article introduced Ajax.Updater() for simple Ajax calls, in this case we need a little bit more control over what happens once the response is received. For this purpose, Ajax.Request() is perfect. We can use the onSuccess and onFailure parameters to register functions to handle the response.\n\nfunction saveChanges(obj){\n     var new_content = escape($F(obj.id+'_edit'));\n\n     obj.innerHTML = \"Saving...\";\n     cleanUp(obj, true);\n\n     var success = function(t){editComplete(t, obj);}\n     var failure = function(t){editFailed(t, obj);}\n\n     var url = 'edit.php';\n     var pars = 'id=' + obj.id + '&content=' + new_content;\n     var myAjax = new Ajax.Request(url, {method:'post',\n          postBody:pars, onSuccess:success, onFailure:failure});\n }\n\n function editComplete(t, obj){\n     obj.innerHTML = t.responseText;\n     showAsEditable(obj, true);\n }\n\n function editFailed(t, obj){\n     obj.innerHTML = 'Sorry, the update failed.';\n     cleanUp(obj);\n }\n\nAs you can see, we first grab in the contents of the textarea into the variable new_content. We then remove the editor, set the content of the original object to \u201cSaving\u2026\u201d to show that an update is occurring, and make the Ajax POST.\n\nIf the Ajax fails, editFailed() sets the contents of the object to \u201cSorry, the update failed.\u201d Admittedly, that\u2019s not a very helpful way to handle the error but I have to limit the scope of this article somewhere. It might be a good idea to stow away the original contents of the object (obj.preUpdate = obj.innerHTML) for later retrieval before setting the content to \u201cSaving\u2026\u201d. No one likes a failure \u2013 especially a messy one.\n\nIf the Ajax call is successful, the server-side script returns the edited content, which we then place back inside the object from editComplete, and tidy up.\n\nMeanwhile, back at the server\n\nThe missing piece of the puzzle is the server-side script for committing the changes to your database. Obviously, any solution I provide here is not going to fit your particular application. For the purposes of getting a functional demo going, here\u2019s what I have in PHP.\n\n<?php\n     $id = $_POST['id'];\n     $content = $_POST['content'];\n     echo htmlspecialchars($content);\n ?>\n\nNot exactly rocket science is it? I\u2019m just catching the content item from the POST and echoing it back. For your application to be useful, however, you\u2019ll need to know exactly which record you should be updating. I\u2019m passing in the ID of my <div>, which is not a fat lot of use. You can modify saveChanges() to post back whatever information your app needs to know in order to process the update.\n\nYou should also check the user\u2019s credentials to make sure they have permission to edit whatever it is they\u2019re editing. Basically the same rules apply as with any script in your application.\n\nLimitations\n\nThere are a few bits and bobs that in an ideal world I would tidy up. The first is the error handling, as I\u2019ve already mentioned. The second is that from an idealistic standpoint, I\u2019d rather not be using innerHTML. However, the reality is that it\u2019s presently the most efficient way of making large changes to the document. If you\u2019re serving as XML, remember that you\u2019ll need to replace these with proper DOM nodes.\n\nIt\u2019s also important to note that it\u2019s quite difficult to make something like this universally accessible. Whenever you start updating large chunks of a document based on user interaction, a lot of non-traditional devices don\u2019t cope well. The benefit of this technique, though, is that if JavaScript is unavailable none of the functionality gets implemented at all \u2013 it fails silently. It is for this reason that this shouldn\u2019t be used as a complete replacement for a traditional, universally accessible edit form. It\u2019s a great time-saver for those with the ability to use it, but it\u2019s no replacement.\n\nSee it in action\n\nI\u2019ve put together an example page using the inert PHP script above. That is to say, your edits aren\u2019t committed to a database, so the example is reset when the page is reloaded.", "year": "2005", "author": "Drew McLellan", "author_slug": "drewmclellan", "published": "2005-12-23T00:00:00+00:00", "url": "https://24ways.org/2005/edit-in-place-with-ajax/", "topic": "code"}
{"rowid": 320, "title": "DOM Scripting Your Way to Better Blockquotes", "contents": "Block quotes are great. I don\u2019t mean they\u2019re great for indenting content \u2013 that would be an abuse of the browser\u2019s default styling. I mean they\u2019re great for semantically marking up a chunk of text that is being quoted verbatim. They\u2019re especially useful in blog posts. \n\n<blockquote>\n     <p>Progressive Enhancement, as a label for a strategy for Web design, \n     was coined by Steven Champeon in a series of articles and presentations \n     for Webmonkey and the SxSW Interactive conference.</p>\n </blockquote>\n\nNotice that you can\u2019t just put the quoted text directly between the <blockquote> tags. In order for your markup to be valid, block quotes may only contain block-level elements such as paragraphs.\n\nThere is an optional cite attribute that you can place in the opening <blockquote> tag. This should contain a URL containing the original text you are quoting:\n\n<blockquote cite=\"http://en.wikipedia.org/wiki/Progressive_Enhancement\">\n     <p>Progressive Enhancement, as a label for a strategy for Web design, \n     was coined by Steven Champeon in a series of articles and presentations \n     for Webmonkey and the SxSW Interactive conference.</p>\n </blockquote>\n\nGreat! Except\u2026 the default behavior in most browsers is to completely ignore the cite attribute. Even though it contains important and useful information, the URL in the cite attribute is hidden.\n\nYou could simply duplicate the information with a hyperlink at the end of the quoted text:\n\n<blockquote cite=\"http://en.wikipedia.org/wiki/Progressive_Enhancement\">\n     <p>Progressive Enhancement, as a label for a strategy for Web design, \n     was coined by Steven Champeon in a series of articles and presentations \n     for Webmonkey and the SxSW Interactive conference.</p>\n     <p class=\"attribution\">\n          <a href=\"http://en.wikipedia.org/wiki/Progressive_Enhancement\">source</a>\n     </p>\n </blockquote>\n\nBut somehow it feels wrong to have to write out the same URL twice every time you want to quote something. It could also get very tedious if you have a lot of quotes.\n\nWell, \u201ctedious\u201d is no problem to a programming language, so why not use a sprinkling of DOM Scripting? Here\u2019s a plan for generating an attribution link for every block quote with a cite attribute:\n\n\n\tWrite a function called prepareBlockquotes.\n\tBegin by making sure the browser understands the methods you will be using.\n\tGet all the blockquote elements in the document.\n\tStart looping through each one.\n\tGet the value of the cite attribute.\n\tIf the value is empty, continue on to the next iteration of the loop.\n\tCreate a paragraph.\n\tCreate a link.\n\tGive the paragraph a class of \u201cattribution\u201d.\n\tGive the link an href attribute with the value from the cite attribute.\n\tPlace the text \u201csource\u201d inside the link.\n\tPlace the link inside the paragraph.\n\tPlace the paragraph inside the block quote.\n\tClose the for loop.\n\tClose the function.\n\n\nHere\u2019s how that translates to JavaScript:\n\nfunction prepareBlockquotes() {\n     if (!document.getElementsByTagName || !document.createElement || !document.appendChild) return;\n     var quotes = document.getElementsByTagName(\"blockquote\");\n     for (var i=0; i<quotes.length; i++) {\n          var source = quotes[i].getAttribute(\"cite\");\n          if (!source) continue;\n          var para = document.createElement(\"p\");\n          var link = document.createElement(\"a\");\n          para.className = \"attribution\";\n          link.setAttribute(\"href\",source);\n          link.appendChild(document.createTextNode(\"source\"));\n          para.appendChild(link);\n          quotes[i].appendChild(para);\n     }\n }\n\n\nNow all you need to do is trigger that function when the document has loaded:\n\nwindow.onload = prepareBlockquotes;\n\nBetter yet, use Simon Willison\u2019s handy addLoadEvent function to queue this function up with any others you might want to execute when the page loads.\n\nThat\u2019s it. All you need to do is save this function in a JavaScript file and reference that file from the head of your document using <script> tags.\n\nYou can style the attribution link using CSS. It might look good aligned to the right with a smaller font size.\n\nIf you\u2019re looking for something to do to keep you busy this Christmas, I\u2019m sure that this function could be greatly improved. Here are a few ideas to get you started:\n\n\n\tShould the text inside the generated link be the URL itself?\n\tIf the block quote has a title attribute, how would you take its value and use it as the text inside the generated link?\n\tShould the attribution paragraph be placed outside the block quote? If so, how would you that (remember, there is an insertBefore method but no insertAfter)?\n\tCan you think of other instances of useful information that\u2019s locked away inside attributes? Access keys? Abbreviations?", "year": "2005", "author": "Jeremy Keith", "author_slug": "jeremykeith", "published": "2005-12-05T00:00:00+00:00", "url": "https://24ways.org/2005/dom-scripting-your-way-to-better-blockquotes/", "topic": "code"}
{"rowid": 317, "title": "Putting the World into \"World Wide Web\"", "contents": "Despite the fact that the Web has been international in scope from its inception, the predominant mass of Web sites are written in English or another left-to-right language. Sites are typically designed visually for Western culture, and rely on an enormous body of practices for usability, information architecture and interaction design that are by and large centric to the Western world.\n\nThere are certainly many reasons this is true, but as more and more Web sites realize the benefits of bringing their products and services to diverse, global markets, the more demand there will be on Web designers and developers to understand how to put the World into World Wide Web.\n\nInternationalization\n\nAccording to the W3C, Internationalization is:\n\n\n\t\u201c\u2026the design and development of a product, application or document content that enables easy localization for target audiences that vary in culture, region, or language.\u201d\n\n\nMany Web designers and developers have at least heard, if not read, about Internationalization. We understand that the Web is in fact worldwide, but many of us never have the opportunity to work with Internationalization. Or, when we do, think of it in purely technical terms, such as \u201cwhich character set do I use?\u201d\n\nAt first glance, it might seem to many that Internationalization is the act of making Web sites available to international audiences. And while that is in fact true, this isn\u2019t done by broad-stroking techniques and technologies. Instead, it involves a far more narrow understanding of geographical, cultural and linguistic differences in specific areas of the world. This is referred to as localization and is the act of making a Web site make sense in the context of the region, culture and language(s) the people using the site are most familiar with.\n\nInternationalization itself includes the following technical tasks:\n\n\n\tEnsuring no barrier exists to the localization of sites. Of critical importance in the planning stages of a site for Internationalized audiences, the role of the developer is to ensure that no barrier exists. This means being able to perform such tasks as enabling Unicode and making sure legacy character encodings are properly handled.\n\tPreparing markup and CSS with Internationalization in mind. The earlier in the site development process this occurs, the better. Issues such as ensuring that you can support bidirectional text, identifying language, and using CSS to support non-Latin typographic features.\n\tEnabling code to support local, regional, language or culturally related references. Examples in this category would include time/date formats, localization of calendars, numbering systems, sorting of lists and managing international forms of addresses.\n\tEmpowering the user. Sites must be architected so the user can easily choose or implement the localized alternative most appropriate to them.\n\n\nLocalization\n\nAccording to the W3C, Localization is the:\n\n\n\t\u2026adaptation of a product, application or document content to meet the language, cultural and other requirements of a specific target market (a \u201clocale\u201d).\n\n\nSo here\u2019s where we get down to thinking about the more sociological and anthropological concerns. Some of the primary localization issues are:\n\n\n\tNumeric formats. Different languages and cultures use numbering systems unlike ours. So, any time we need to use numbers, such as in an ordered list, we have to have a means of representing the accurate numbering system for the locale in question.\n\tMoney, honey!  That\u2019s right. I\u2019ve got a pocketful of ugly U.S. dollars (why is U.S. money so unimaginative?). But I also have a drawer full of Japanese Yen, Australian Dollars, and Great British Pounds. Currency, how it\u2019s calculated and how it\u2019s represented is always a consideration when dealing with localization.\n\tUsing symbols, icons and colors properly. Using certain symbols or icons on sites where they might offend or confuse is certainly not in the best interest of a site that wants to sell or promote a product, service or information type. Moreover, the colors we use are surprisingly persuasive \u2013 or detrimental. Think about colors that represent death, for example. In many parts of Asia, white is the color of death. In most of the Western world, black represents death. For Catholic Europe, shades of purple (especially lavender) have represented Christ on the cross and mourning since at least Victorian times. When Walt Disney World Europe launched an ad campaign using a lot of purple and very glitzy imagery, millions of dollars were lost as a result of this seeming subtle issue. Instead of experiencing joy and celebration at the ads, the European audience, particularly the French, found the marketing to be overly American, aggressive, depressing and basically unappealing. Along with this and other cultural blunders, Disney Europe has become a well-known case study for businesses wishing to become international. By failing to understand localization differences, and how powerful color and imagery act on the human psyche, designers and developers are put to more of a disadvantage when attempting to communicate with a given culture.\n\tChoosing appropriate references to objects and ideas. What seems perfectly natural in one culture in terms of visual objects and ideas can get confused in another environment. One of my favorite cases of this has to do with Gerber baby food. In the U.S., the baby food is marketed using a cute baby on the package. Most people in the U.S. culturally do not make an immediate association that what is being represented on the label is what is inside the container. However, when Gerber expanded to Africa, where many people don\u2019t read, and where visual associations are less abstract, people made the inference that a baby on the cover of a jar of food represented what is in fact in the jar. You can imagine how confused and even angry people became. Using such approaches as a marketing ploy in the wrong locale can and will render the marketing a failure.\n\n\nAs you can see, the act of localization is one that can have profound impact on the success of a business or organization as it seeks to become available to more and more people across the globe.\n\nRethinking Design in the Context of Culture\n\nWhile well-educated designers and those individuals working specifically for companies that do a lot of localization understand these nuances, most of us don\u2019t get exposed to these ideas. Yet, we begin to see how necessary it becomes to have an awareness of not just the technical aspects of Internationalization, but the socio-cultural ones within localization.\n\nWhat\u2019s more, the bulk of information we have when it comes to designing sites typically comes from studies and work done on sites built in English and promoted to Western culture at large. We\u2019re making a critical mistake by not including diverse languages and cultural issues within our usability and information architecture studies.\n\nConsider the following design from the BBC:\n\n\n\nIn this case, we\u2019re dealing with English, which is read left to right. We are also dealing with U.K. cultural norms. Notice the following:\n\n\n\tLocation of of navigation\n\tUse of the color red\n\tUse of diverse symbols\n\tMix of symbols, icons and photos\n\tLocation of Search\n\n\nNow look at this design, which is the Arabic version of the BBC News, read right to left, and dealing with cultural norms within the Arabic-speaking world.\n\n\n\nNotice the following:\n\n\n\tLocation of of navigation (location switches to the right)\n\tUse of the color blue (blue is considered the \u201csafest\u201d global color)\n\tNo use of symbols and icons whatsoever\n\tLimitation of imagery to photos\n\tIn most cases, the photos show people, not objects\n\tLocation of Search\n\n\nAdmittedly, some choices here are more obvious than others in terms of why they were made. But one thing that stands out is that the placement of search is the same for both versions. Is this the result of a specific localization decision, or based on what we believe  about usability at large? This is exactly the kind of question that designers working on localization have to seek answers to, instead of relying on popular best practices and belief systems that exist for English-only Web sites.\n\nIt\u2019s a Wide World Web After All\n\nFrom this brief article on Internationalization, it becomes apparent that the art and science of creating sites for global audiences requires a lot more preparation and planning than one might think at first glance.  Developers and designers not working to address these issues specifically due to time or awareness will do well to at least understand the basic process of making sites more culturally savvy, and better prepared for any future global expansion.\n\nOne thing is certain: We not only are on a dramatic learning curve for designing and developing Web sites as it is, the need to localize sites is going to become more and more a part of the day to day work. Understanding aspects of what makes a site international and local will not only help you expand your skill set and make you more marketable, but it will also expand your understanding of the world and the people within it, how they relate to and use the Web, and how you can help make their experience the best one possible.", "year": "2005", "author": "Molly Holzschlag", "author_slug": "mollyholzschlag", "published": "2005-12-09T00:00:00+00:00", "url": "https://24ways.org/2005/putting-the-world-into-world-wide-web/", "topic": "ux"}
{"rowid": 313, "title": "Centered Tabs with CSS", "contents": "Doug Bowman\u2019s Sliding Doors is pretty much the de facto way to build tabbed navigation with CSS, and rightfully so \u2013 it is, as they say, rockin\u2019 like Dokken. But since it relies heavily on floats for the positioning of its tabs, we\u2019re constrained to either left- or right-hand navigation. But what if we need a bit more flexibility? What if we need to place our navigation in the center?\n\nStyling the li as a floated block does give us a great deal of control over margin, padding, and other presentational styles. However, we should learn to love the inline box \u2013 with it, we can create a flexible, centered alternative to floated navigation lists.\n\nHumble Beginnings\n\nDo an extra shot of \u2018nog, because you know what\u2019s coming next. That\u2019s right, a simple unordered list:\n\n<div id=\"navigation\">\n     <ul>\n          <li><a href=\"#\"><span>Home</span></a></li>\n          <li><a href=\"#\"><span>About</span></a></li>\n          <li><a href=\"#\"><span>Our Work</span></a></li>\n          <li><a href=\"#\"><span>Products</span></a></li>\n          <li class=\"last\"><a href=\"#\"><span>Contact Us</span></a></li>\n     </ul>\n</div>\n\nIf we were wedded to using floats to style our list, we could easily fix the width of our ul, and trick it out with some margin: 0 auto; love to center it accordingly. But this wouldn\u2019t net us much flexibility: if we ever changed the number of navigation items, or if the user increased her browser\u2019s font size, our design could easily break.\n\nInstead of worrying about floats, let\u2019s take the most basic approach possible: let\u2019s turn our list items into inline elements, and simply use text-align to center them within the ul:\n\n#navigation ul, #navigation ul li {\n     list-style: none;\n     margin: 0;\n     padding: 0;\n}\n\n#navigation ul {\n     text-align: center;\n}\n\n#navigation ul li {\n     display: inline;\n     margin-right: .75em;\n}\n\n#navigation ul li.last {\n     margin-right: 0;\n}\n\nOur first step is sexy, no? Well, okay, not really \u2013 but it gives us a good starting point. We\u2019ve tamed our list by removing its default styles, set the list items to display: inline, and centered the lot. Adding a background color to the links shows us exactly how the different elements are positioned.\n\nNow the fun stuff.\n\nInline Elements, Padding, and You\n\nSo how do we give our links some dimensions? Well, as the CSS specification tells us, the height property isn\u2019t an option for inline elements such as our anchors. However, what if we add some padding to them?\n\n#navigation li a {\n     padding: 5px 1em;\n}\n\nI just love leading questions. Things are looking good, but something\u2019s amiss: as you can see, the padded anchors seem to be escaping their containing list.\n\nThankfully, it\u2019s easy to get things back in line. Our anchors have 5 pixels of padding on their top and bottom edges, right? Well, by applying the same vertical padding to the list, our list will finally \u201ccontain\u201d its child elements once again.\n\n\u2019Tis the Season for Tabbing\n\nNow, we\u2019re finally able to follow the \u201cSliding Doors\u201d model, and tack on some graphics:\n\n#navigation ul li a {\n     background: url(\"tab-right.gif\") no-repeat 100% 0;\n     color: #06C;\n     padding: 5px 0;\n     text-decoration: none;\n}\n\n#navigation ul li a span {\n     background: url(\"tab-left.gif\") no-repeat;\n     padding: 5px 1em;\n}\n\n#navigation ul li a:hover span {\n     color: #69C;\n     text-decoration: underline;\n}\n\nFinally, our navigation\u2019s looking appropriately sexy. By placing an equal amount of padding on the top and bottom of the ul, our tabs are properly \u201ccontained\u201d, and we can subsequently style the links within them.\n\n\n\nBut what if we want them to bleed over the bottom-most border? Easy: we can simply decrease the bottom padding on the list by one pixel, like so.\n\nA Special Note for Special Browsers\n\nThe Mac IE5 users in the audience are likely hopping up and down by now: as they\u2019ve discovered, our centered navigation behaves rather annoyingly in their browser. As Philippe Wittenbergh has reported, Mac IE5 is known to create \u201cphantom links\u201d in a block-level element when text-align is set to any value but the default value of left. Thankfully, Philippe has documented a workaround that gets that [censored] venerable browser to behave. Simply place the following code into your CSS, and the links will be restored to their appropriate width:\n\n/**//*/\n#navigation ul li a {\n     display: inline-block;\n     white-space: nowrap;\n     width: 1px;\n}\n/**/\n\nIE for Windows, however, displays an extra kind of crazy. The padding I\u2019ve placed on my anchors is offsetting the spans that contain the left curve of my tabs; thankfully, these shenanigans are easily straightened out:\n\n/**/\n* html #navigation ul li a {\n     padding: 0;\n}\n/**/\n\nAnd with that, we\u2019re finally finished.\n\nAll set.\n\nAnd that\u2019s it. With your centered navigation in hand, you can finally enjoy those holiday toddies and uncomfortable conversations with your skeevy Uncle Eustace.", "year": "2005", "author": "Ethan Marcotte", "author_slug": "ethanmarcotte", "published": "2005-12-08T00:00:00+00:00", "url": "https://24ways.org/2005/centered-tabs-with-css/", "topic": "code"}
{"rowid": 330, "title": "An Explanation of Ems", "contents": "Ems are so-called because they are thought to approximate the size of an uppercase letter M (and so are pronounced emm), although 1em is actually significantly larger than this. The typographer Robert Bringhurst describes the em thus:\n\n\n\tThe em is a sliding measure. One em is a distance equal to the type size. In 6 point type, an em is 6 points; in 12 point type an em is 12 points and in 60 point type an em is 60 points. Thus a one em space is proportionately the same in any size.\n\n\nTo illustrate this principle in terms of CSS, consider these styles:\n\n#box1 {\n     font-size: 12px;\n     width: 1em;\n     height: 1em;\n     border:1px solid black;\n}\n\n#box2 {\n     font-size: 60px;\n     width: 1em;\n     height: 1em;\n     border: 1px solid black;\n}\n\nThese styles will render like:\n\n M\n\nand\n\n M\n\nNote that both boxes have a height and width of 1em but because they have different font sizes, one box is bigger than the other. Box 1 has a font-size of 12px so its width and height is also 12px; similarly the text of box 2 is set to 60px and so its width and height are also 60px.", "year": "2005", "author": "Richard Rutter", "author_slug": "richardrutter", "published": "2005-12-02T00:00:00+00:00", "url": "https://24ways.org/2005/an-explanation-of-ems/", "topic": "design"}
{"rowid": 322, "title": "Introduction to Scriptaculous Effects", "contents": "Gather around kids, because this year, much like in that James Bond movie with Denise Richards, Christmas is coming early\u2026 in the shape of scrumptuous smooth javascript driven effects at your every whim.\n\nNow what I\u2019m going to do, is take things down a notch. Which is to say, you don\u2019t need to know much beyond how to open a text file and edit it to follow this article. Personally, I for instance can\u2019t code to save my life.\n\nWell, strictly speaking, that\u2019s not entirely true. If my life was on the line, and the code needed was really simple and I wasn\u2019t under any time constraints, then yeah maybe I could hack my way out of it\n\nBut my point is this: I\u2019m not a programmer in the traditional sense of the word. In fact, what I do best, is scrounge code off of other people, take it apart and then put it back together with duct tape, chewing gum and dumb blind luck.\n\nNo, don\u2019t run! That happens to be a good thing in this case. You see, we\u2019re going to be implementing some really snazzy effects (which are considerably more relevant than most people are willing to admit) on your site, and we\u2019re going to do it with the aid of Thomas Fuchs\u2019 amazing Script.aculo.us library. And it will be like stealing candy from a child.\n\nWhat Are We Doing?\n\nI\u2019m going to show you the very basics of implementing the Script.aculo.us javascript library\u2019s Combination Effects. These allow you to fade elements on your site in or out, slide them up and down and so on.\n\nWhy Use Effects at All?\n\nBefore get started though, let me just take a moment to explain how I came to see smooth transitions as something more than smoke and mirror-like effects included for with little more motive than to dazzle and make parents go \u2018uuh, snazzy\u2019.\n\nEarlier this year, I had the good fortune of meeting the kind, gentle and quite knowledgable Matt Webb at a conference here in Copenhagen where we were both speaking (though I will be the first to admit my little talk on Open Source Design was vastly inferior to Matt\u2019s talk). Matt held a talk called Fixing Broken Windows (based on the Broken Windows theory), which really made an impression on me, and which I have since then referred back to several times.\n\nYou can listen to it yourself, as it\u2019s available from Archive.org. Though since Matt\u2019s session uses many visual examples, you\u2019ll have to rely on your imagination for some of the examples he runs through during it. Also, I think it looses audio for a few seconds every once in a while.\n\nAnyway, one of the things Matt talked a lot about, was how our eyes are wired to react to movement. The world doesn\u2019t flickr. It doesn\u2019t disappear or suddenly change and force us to look for the change. Things move smoothly in the real world. They do not pop up.\n\nHow it Works\n\nOnce the necessary files have been included, you trigger an effect by pointing it at the ID of an element. Simple as that.\n\nImplementing the Effects\n\nSo now you know why I believe these effects have a place in your site, and that\u2019s half the battle. Because you see, actually getting these effects up and running, is deceptively simple.\n\nFirst, go and download the latest version of the library (as of this writing, it\u2019s version 1.5 rc5). Unzip itand open it up.\n\nNow we\u2019re going to bypass the instructions in the readme file. Script.aculo.us can do a bunch of quite advanced things, but all we really want from it is its effects. And by sidestepping the rest of the features, we can shave off roughly 80KB of unnecessary javascript, which is well worth it if you ask me.\n\nAs with Drew\u2019s article on Easy Ajax with Prototype, script.aculo.us also uses the Prototype framework by  Sam Stephenson. But contrary to Drew\u2019s article, you don\u2019t have to download Prototype, as a version comes bundled with script.aculo.us (though feel free to upgrade to the latest version if you so please).\n\nSo in the unzipped folder, containing the script.aculo.us files and folder, go into \u2018lib\u2019 and grab the \u2018prototype.js\u2019 file. Move it to whereever you want to store the javascript files. Then fetch the \u2018effects.js\u2019 file from the \u2018src\u2019 folder and put it in the same place.\n\nTo make things even easier for you to get this up and running, I have prepared a small javascript snippet which does some checking to see what you\u2019re trying to do. The script.aculo.us effects are all either \u2018turn this off\u2019 or \u2018turn this on\u2019. What this snippet does, is check to see what state the target currently has (is it on or off?) and then use the necessary effect.\n\nYou can either skip to the end and download the example code, or copy and paste this code into a file manually (I\u2019ll refer to that file as combo.js):\n\nEffect.OpenUp = function(element) {\n     element = $(element);\n     new Effect.BlindDown(element, arguments[1] || {});\n }\n\n Effect.CloseDown = function(element) {\n     element = $(element);\n     new Effect.BlindUp(element, arguments[1] || {});\n }\n\n Effect.Combo = function(element) {\n     element = $(element);\n     if(element.style.display == 'none') { \n          new Effect.OpenUp(element, arguments[1] || {}); \n     }else { \n          new Effect.CloseDown(element, arguments[1] || {}); \n     }\n }\n\nCurrently, this code uses the BlindUp and BlindDown code, which I personally like, but there\u2019s nothing wrong with you changing the effect-type into one of the other effects available.\n\nNow, include the three files in the header of your code, like so:\n\n<script src=\"prototype.js\" type=\"text/javascript\"></script>\n<script src=\"effects.js\" type=\"text/javascript\"></script>\n<script src=\"combo.js\" type=\"text/javascript\"></script>\n\nNow insert the element you want to use the effect on, like so:\n\n<div id=\"content\" style=\"display: none;\">Lorem ipsum dolor sit amet.</div>\n\nThe above element will start out invisible, and when triggered will be revealed. If you want it to start visible, simply remove the style parameter.\n\nAnd now for the trigger \n\n<a href=\"javascript:Effect.Combo('content');\">Click Here</a>\n\nAnd that, is pretty much it. Clicking the link should unfold the DIV targeted by the effect, in this case \u2018content\u2019.\n\nEffect Options\n\nNow, it gets a bit long-haired though. The documentation for script.aculo.us is next to non-existing, and because of that you\u2019ll have to do some digging yourself to appreciate the full potentialof these effects.\n\nFirst of all, what kind of effects are available? Well you can go to the demo page and check them out, or you can open the \u2018effects.js\u2019 file and have a look around, something I recommend doing regardlessly, to gain an overview of what exactly you\u2019re dealing with.\n\nIf you dissect it for long enough, you can even distill some of the options available for the various effects. In the case of the BlindUp and BlindDown effect, which we\u2019re using in our example (as triggered from combo.js), one of the things that would be interesting to play with would be the duration of the effect. If it\u2019s too long, it will feel slow and unresponsive. Too fast and it will be imperceptible.\n\nYou set the options like so:\n\n<a href=\"javascript:Effect.Combo('content', {duration: .2});\">Click Here</a>\n\nThe change from the previous link being the inclusion of , {duration: .2}. In this case, I have lowered the duration to 0.2 second, to really make it feel snappy.\n\nYou can also go all-out and turn on all the bells and whistles of the Blind effect like so (slowed down to a duration of three seconds so you can see what\u2019s going on):\n\n<a href=\"javascript:Effect.Combo('content', {duration: 3, scaleX: true, scaleContent: true});\">Click Here</a>\n\nConclusion\n\nAnd that\u2019s pretty much it. The rest is a matter of getting to know the rest of the effects and their options as well as finding out just when and where to use them. Remember the ancient Chinese saying: Less is more.\n\nDownload Example\n\nI have prepared a very basic example, which you can download and use as a reference point.", "year": "2005", "author": "Michael Heilemann", "author_slug": "michaelheilemann", "published": "2005-12-12T00:00:00+00:00", "url": "https://24ways.org/2005/introduction-to-scriptaculous-effects/", "topic": "code"}
{"rowid": 332, "title": "CSS Layout Starting Points", "contents": "I build a lot of CSS layouts, some incredibly simple, others that cause sleepless nights and remind me of the torturous puzzle books that were given to me at Christmas by aunties concerned for my education. However, most of the time these layouts fit quite comfortably into one of a very few standard formats. For example:\n\n\n\tLiquid, multiple column with no footer\n\tLiquid, multiple column with footer\n\tFixed width, centred\n\n\nRather than starting out with blank CSS and (X)HTML documents every time you need to build a layout, you can fairly quickly create a bunch of layout starting points, that will give you a solid basis for creating the rest of the design and mean that you don\u2019t have to remember how a three column layout with a footer is best achieved every time you come across one! \n\nThese starting points can be really basic, in fact that\u2019s exactly what you want as the final design, the fonts, the colours and so on will be different every time. It\u2019s just the main sections we want to be able to quickly get into place. For example, here is a basic starting point CSS and XHTML document for a fixed width, centred layout with a footer.\n\n <!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Strict//EN\"\n     \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd\">\n<html xmlns=\"http://www.w3.org/1999/xhtml\">\n<head>\n     <title>Fixed Width and Centred starting point document</title>\n     <link rel=\"stylesheet\" type=\"text/css\" href=\"fixed-width-centred.css\" />\n     <meta http-equiv=\"Content-Type\" content=\"text/html; charset=utf-8\" />\n</head>\n<body>\n<div id=\"wrapper\">\n     <div id=\"side\">\n          <div class=\"inner\">\n               <p>Sidebar content here</p>\n          </div>\n     </div>\n     <div id=\"content\">\n          <div class=\"inner\">\n               <p>Your main content goes here.</p>\n          </div>\n     </div>\n     <div id=\"footer\">\n          <div class=\"inner\">\n               <p>Ho Ho Ho!</p>\n          </div>\n     </div>\n</div>\n</body>\n</html>\n\n body {\n     text-align: center;\n     min-width: 740px;\n     padding: 0;\n     margin: 0;\n }\n\n #wrapper {\n     text-align: left;\n     width: 740px;\n     margin-left: auto;\n     margin-right: auto;\n     padding: 0;\n }\n\n #content {\n     margin: 0 200px 0 0;\n }\n\n #content .inner {\n     padding-top: 1px;\n     margin: 0 10px 10px 10px;\n }\n\n #side {\n     float: right;\n     width: 180px;\n     margin: 0;\n }\n\n #side .inner {\n     padding-top: 1px;\n     margin: 0 10px 10px 10px;\n }\n\n #footer {\n     margin-top: 10px;\n     clear: both;\n }\n\n #footer .inner {\n     margin: 10px;\n }\n\n9 times out of 10, after figuring out exactly what main elements I have in a layout, I can quickly grab the \u2018one I prepared earlier\u2019, mark-up the relevant sections within the ready-made divs, and from that point on, I only need to worry about the contents of those different areas. The actual layout is tried and tested, one that I know works well in different browsers and that is unlikely to throw me any nasty surprises later on. In addition, considering how the layout is going to work first prevents the problem of developing a layout, then realising you need to put a footer on it, and needing to redevelop the layout as the method you have chosen won\u2019t work well with a footer.\n\nWhile enjoying your mince pies and mulled wine during the \u2018quiet time\u2019 between Christmas and New Year, why not create some starting point layouts of your own? The css-discuss Wiki, CSS layouts section is a great place to find examples that you can try out and find your favourite method of creating the various layout types.", "year": "2005", "author": "Rachel Andrew", "author_slug": "rachelandrew", "published": "2005-12-04T00:00:00+00:00", "url": "https://24ways.org/2005/css-layout-starting-points/", "topic": "code"}
{"rowid": 333, "title": "The Attribute Selector for Fun and (no ad) Profit", "contents": "If I had a favourite CSS selector, it would undoubtedly be the attribute selector (Ed: You really need to get out more). For those of you not familiar with the attribute selector, it allows you to style an element based on the existence, value or partial value of a specific attribute.\n\nAt it\u2019s very basic level you could use this selector to style an element with particular attribute, such as a title attribute.\n\n<abbr title=\"Cascading Style Sheets\">CSS</abbr>\n\nIn this example I\u2019m going to make all <abbr> elements with a title attribute grey. I am also going to give them a dotted bottom border that changes to a solid border on hover. Finally, for that extra bit of feedback, I will change the cursor to a question mark on hover as well. \n\nabbr[title] {\n     color: #666;\n     border-bottom: 1px dotted #666;\n }\n\n abbr[title]:hover {\n     border-bottom-style: solid;\n     cursor: help;\n }\n\nThis provides a nice way to show your site users that <abbr> elements with title tags are special, as they contain extra, hidden information.\n\nMost modern browsers such as Firefox, Safari and Opera support the attribute selector. Unfortunately Internet Explorer 6 and below does not support the attribute selector, but that shouldn\u2019t stop you from adding nice usability embellishments to more modern browsers.\n\nInternet Explorer 7 looks set to implement this CSS2.1 selector, so expect to see it become more common over the next few years.\n\nStyling an element based on the existence of an attribute is all well and good, but it is still pretty limited. Where attribute selectors come into their own is their ability to target the value of an attribute. You can use this for a variety of interesting effects such as styling VoteLinks.\n\nVoteWhats?\n\nIf you haven\u2019t heard of VoteLinks, it is a microformat that allows people to show their approval or disapproval of a links destination by adding a pre-defined keyword to the rev attribute.\n\nFor instance, if you had a particularly bad meal at a restaurant, you could signify your dissaproval by adding a rev attribute with a value of vote-against.\n\n<a href=\"http://www.mommacherri.co.uk/\" rev=\"vote-against\">Momma Cherri's</a>\n\nYou could then highlight these links by adding an image to the right of these links.\n\na[rev=\"vote-against\"]{\n     padding-right: 20px;\n     background: url(images/vote-against.png) no-repeat right top;\n}\n\nThis is a useful technique, but it will only highlight VoteLinks on sites you control. This is where user stylesheets come into effect. If you create a user stylesheet containing this rule, every site you visit that uses VoteLinks will receive your new style.\n\nCool huh?\n\nHowever my absolute favourite use for attribute selectors is as a lightweight form of ad blocking. Most online adverts conform to industry-defined sizes. So if you wanted to block all banner-ad sized images, you could simply add this line of code to your user stylesheet.\n\nimg[width=\"468\"][height=\"60\"],\nimg[width=\"468px\"][height=\"60px\"]  {\n     display: none !important;\n}\n\nTo hide any banner-ad sized element, such as flash movies, applets or iFrames, simply apply the above rule to every element using the universal selector.\n\n*[width=\"468\"][height=\"60\"], *[width=\"468px\"][height=\"60px\"]  {\n     display: none !important;\n}\n\nJust bare in mind when using this technique that you may accidentally hide something that isn\u2019t actually an advert; it just happens to be the same size.\n\nThe Interactive Advertising Bureau lists a number of common ad sizes. Using these dimensions, you can create stylesheet that blocks all the popular ad formats. Apply this as a user stylesheet and you never need to suffer another advert again.\n\nHere\u2019s wishing you a Merry, ad-free Christmas.", "year": "2005", "author": "Andy Budd", "author_slug": "andybudd", "published": "2005-12-11T00:00:00+00:00", "url": "https://24ways.org/2005/the-attribute-selector-for-fun-and-no-ad-profit/", "topic": "code"}
{"rowid": 318, "title": "Auto-Selecting Navigation", "contents": "In the article Centered Tabs with CSS Ethan laid out a tabbed navigation system which can be centred on the page. A frequent requirement for any tab-based navigation is to be able to visually represent the currently selected tab in some way.\n\nIf you\u2019re using a server-side language such as PHP, it\u2019s quite easy to write something like class=\"selected\" into your markup, but it can be even simpler than that.\n\nLet\u2019s take the navigation div from Ethan\u2019s article as an example.\n\n<div id=\"navigation\">\n     <ul>\n          <li><a href=\"#\"><span>Home</span></a></li>\n          <li><a href=\"#\"><span>About</span></a></li>\n          <li><a href=\"#\"><span>Our Work</span></a></li>\n          <li><a href=\"#\"><span>Products</span></a></li>\n          <li class=\"last\"><a href=\"#\"><span>Contact Us</span></a></li>\n     </ul>\n </div>\n\nAs you can see we have a standard unordered list which is then styled with CSS to look like tabs. By giving each tab a class which describes it\u2019s logical section of the site, if we were to then apply a class to the body tag of each page showing the same, we could write a clever CSS selector to highlight the correct tab on any given page. \n\nSound complicated? Well, it\u2019s not a trivial concept, but actually applying it is dead simple.\n\nModifying the markup\n\nFirst thing is to place a class name on each li in the list:\n\n<div id=\"navigation\">\n     <ul>\n          <li class=\"home\"><a href=\"#\"><span>Home</span></a></li>\n          <li class=\"about\"><a href=\"#\"><span>About</span></a></li>\n          <li class=\"work\"><a href=\"#\"><span>Our Work</span></a></li>\n          <li class=\"products\"><a href=\"#\"><span>Products</span></a></li>\n          <li class=\"last contact\"><a href=\"#\"><span>Contact Us</span></a></li>\n     </ul>\n </div>\n\nThen, on each page of your site, apply the a matching class to the body tag to indicate which section of the site that page is in. For example, on your About page:\n\n<body class=\"about\">...</body>\n\nWriting the CSS selector\n\nYou can now write a single CSS rule to match the selected tab on any given page. The logic is that you want to match the \u2018about\u2019 tab on the \u2018about\u2019 page and the \u2018products\u2019 tab on the \u2018products\u2019 page, so the selector looks like this:\n\nbody.home #navigation li.home,\n body.about #navigation li.about,\n body.work #navigation li.work,\n body.products #navigation li.products,\n body.contact #navigation li.contact{\n      ... whatever styles you need to show the tab selected ...\n } \n\nSo all you need to do when you create a new page in your site is to apply a class to the body tag to say which section it\u2019s in. The CSS will do the rest for you \u2013 without any server-side help.", "year": "2005", "author": "Drew McLellan", "author_slug": "drewmclellan", "published": "2005-12-10T00:00:00+00:00", "url": "https://24ways.org/2005/auto-selecting-navigation/", "topic": "code"}
{"rowid": 321, "title": "Tables with Style", "contents": "It might not seem like it but styling tabular data can be a lot of fun. From a semantic point of view, there are plenty of elements to tie some style into. You have cells, rows, row groups and, of course, the table element itself. Adding CSS to a paragraph just isn\u2019t as exciting.\n\nWhere do I start?\n\nFirst, if you have some tabular data (you know, like a spreadsheet with rows and columns) that you\u2019d like to spiffy up, pop it into a table \u2014 it\u2019s rightful place!\n\nTo add more semantics to your table \u2014 and coincidentally to add more hooks for CSS \u2014 break up your table into row groups. There are three types of row groups: the header (thead), the body (tbody) and the footer (tfoot). You can only have one header and one footer but you can have as many table bodies as is appropriate.\n\nSample table example\n\nInspiration\n\nTable Striping\n\nTo improve scanning information within a table, a common technique is to style alternating rows. Also known as zebra tables. Whether you apply it using a class on every other row or turn to JavaScript to accomplish the task, a handy-dandy trick is to use a semi-transparent PNG as your background image. This is especially useful over patterned backgrounds. \n\ntbody tr.odd td {\n     background:transparent url(background.png) repeat top left;\n }\n\n * html tbody tr.odd td {\n     background:#C00;\n     filter: progid:DXImageTransform.Microsoft.AlphaImageLoader(\n          src='background.png', sizingMethod='scale');\n }\n\nWe turn off the default background and apply our PNG hack to have this work in Internet Explorer. \n\nStyling Columns\n\nDid you know you could style a column? That\u2019s right. You can add special column (col) or column group (colgroup) elements. With that you can add border or background styles to the column.\n\n<table>\n     <col id=\"ingredients\">\n     <col id=\"serve12\">\n     <col id=\"serve24\">\n ...\n\nCheck out the example.\n\nFun with Backgrounds\n\nPop in a tiled background to give your table some character! Internet Explorer\u2019s PNG hack unfortunately only works well when applied to a cell.\n\nTo figure out which background will appear over another, just remember the hierarchy:\n\n (bottom) Table \u2192 Column \u2192 Row Group \u2192 Row \u2192 Cell (top)\n\nThe Future is Bright\n\nOnce browser-makers start implementing CSS3, we\u2019ll have more power at our disposal. Just with :first-child and :last-child, you can pull off a scalable version of our previous table with rounded corners and all \u2014 unfortunately, only Firefox manages to pull this one off successfully. And the selector the masses are clamouring for, nth-child, will make zebra tables easy as eggnog.", "year": "2005", "author": "Jonathan Snook", "author_slug": "jonathansnook", "published": "2005-12-19T00:00:00+00:00", "url": "https://24ways.org/2005/tables-with-style/", "topic": "code"}
{"rowid": 326, "title": "Don't be eval()", "contents": "JavaScript is an interpreted language, and like so many of its peers it includes the all powerful eval() function. eval() takes a string and executes it as if it were regular JavaScript code. It\u2019s incredibly powerful and incredibly easy to abuse in ways that make your code slower and harder to maintain. As a general rule, if you\u2019re using eval() there\u2019s probably something wrong with your design.\n\nCommon mistakes\n\nHere\u2019s the classic misuse of eval(). You have a JavaScript object, foo, and you want to access a property on it \u2013 but you don\u2019t know the name of the property until runtime. Here\u2019s how NOT to do it:\n\nvar property = 'bar';\nvar value = eval('foo.' + property);\n\nYes it will work, but every time that piece of code runs JavaScript will have to kick back in to interpreter mode, slowing down your app. It\u2019s also dirt ugly.\n\nHere\u2019s the right way of doing the above:\n\nvar property = 'bar';\nvar value = foo[property];\n\nIn JavaScript, square brackets act as an alternative to lookups using a dot. The only difference is that square bracket syntax expects a string.\n\nSecurity issues\n\nIn any programming language you should be extremely cautious of executing code from an untrusted source. The same is true for JavaScript \u2013 you should be extremely cautious of running eval() against any code that may have been tampered with \u2013 for example, strings taken from the page query string. Executing untrusted code can leave you vulnerable to cross-site scripting attacks.\n\nWhat\u2019s it good for?\n\nSome programmers say that eval() is B.A.D. \u2013 Broken As Designed \u2013 and should be removed from the language. However, there are some places in which it can dramatically simplify your code. A great example is for use with XMLHttpRequest, a component of the set of tools more popularly known as Ajax. XMLHttpRequest lets you make a call back to the server from JavaScript without refreshing the whole page. A simple way of using this is to have the server return JavaScript code which is then passed to eval(). Here is a simple function for doing exactly that \u2013 it takes the URL to some JavaScript code (or a server-side script that produces JavaScript) and loads and executes that code using XMLHttpRequest and eval().\n\nfunction evalRequest(url) {\n     var xmlhttp = new XMLHttpRequest();\n     xmlhttp.onreadystatechange = function() {\n          if (xmlhttp.readyState==4 && xmlhttp.status==200) {\n               eval(xmlhttp.responseText);\n          }\n     }\n     xmlhttp.open(\"GET\", url, true);\n     xmlhttp.send(null);\n }\n\nIf you want this to work with Internet Explorer you\u2019ll need to include this compatibility patch.", "year": "2005", "author": "Simon Willison", "author_slug": "simonwillison", "published": "2005-12-07T00:00:00+00:00", "url": "https://24ways.org/2005/dont-be-eval/", "topic": "code"}
{"rowid": 323, "title": "Introducing UDASSS!", "contents": "Okay. What\u2019s that mean?\n\nUnobtrusive Degradable Ajax Style Sheet Switcher!\n\nBoy are you in for treat today \u2018cause we\u2019re gonna have a whole lotta Ajaxifida Unobtrucitosity CSS swappin\u2019 Fun!\n\nOkay are you really kidding? Nope. I\u2019ve even impressed myself on this one. Unfortunately, I don\u2019t have much time to tell you the ins and outs of what I actually did to get this to work. We\u2019re talking JavaScript, CSS, PHP\u2026Ajax. But don\u2019t worry about that. I\u2019ve always believed that a good A.P.I. is an invisible A.P.I\u2026 and this I felt I achieved. The only thing you need to know is how it works and what to do.\n\nA Quick Introduction Anyway\u2026\n\nFirst of all, the idea is very simple. I wanted something just like what Paul Sowden put together in \nAlternative Style: Working With Alternate Style Sheets from Alistapart Magazine EXCEPT a few minor (not-so-minor actually) differences which I\u2019ve listed briefly below:\n\n\n\n\tAllow users to switch styles without JavaScript enabled (degradable)\n\tPreventing the F.O.U.C. before the window \u2018load\u2019 when getting preferred styles\n\tKeep the JavaScript entirely off our markup (no onclick\u2019s or onload\u2019s)\n\tMake it very very easy to implement (ok, Paul did that too)\n\n\nWhat I did to achieve this was used server-side cookies instead of JavaScript cookies. Hence, PHP. However this isn\u2019t a \u201cPHP style switcher\u201d \u2013 which is where Ajax comes in. For the extreme technical folks, no, there is no xml involved here, or even a callback response. I only say Ajax because everyone knows what \u2018it\u2019 means. With that said, it\u2019s the Ajax that sets the cookies \u2018on the fly\u2019. Got it? Awesome!\n\nWhat you need\n\nLuckily, I\u2019ve done the work for you. It\u2019s all packaged up in a nice zip file (at the end\u2026keep reading for now) \u2013 so from here on out, \njust follow these instructions\n\nAs I\u2019ve mentioned, one of the things we\u2019ll be working with is PHP. So, first things first, open up a file called index and save it with a \u2018.php\u2019 extension.\n\nNext, place the following text at the top of your document (even above your DOCTYPE)\n\n<?php\n require_once('utils/style-switcher.php');\n // style sheet path[, media, title, bool(set as alternate)]\n $styleSheet = new AlternateStyles();\n $styleSheet->add('css/global.css','screen,projection'); // [Global Styles]\n $styleSheet->add('css/preferred.css','screen,projection','Wog Standard'); // [Preferred Styles]\n $styleSheet->add('css/alternate.css','screen,projection','Tiny Fonts',true); // [Alternate Styles]\n $styleSheet->add('css/alternate2.css','screen,projection','Big O Fonts',true); // // [Alternate Styles]\n $styleSheet->getPreferredStyles();\n ?>\n\nThe way this works is REALLY EASY. Pay attention closely.\n\nNotice in the first line we\u2019ve included our style-switcher.php file.\n\nNext we instantiate a PHP class called AlternateStyles() which will allow us to configure our style sheets. \nSo for kicks, let\u2019s just call our object $styleSheet\n\nAs part of the AlternateStyles object, there lies a public method called add. So naturally with our $styleSheet object, we can call it to (da \u2013 da-da-da!) Add Style Sheets!\n\nHow the add() method works\n\nThe add method takes in a possible four arguments, only one is required. However, you\u2019ll want to add some\u2026 since the whole point is working with alternate style sheets.\n\n$path can simply be a uri, absolute, or relative path to your style sheet. $media adds a media attribute to your style sheets. $title gives a name to your style sheets (via title attribute).$alternate (which shows boolean) simply tells us that these are the alternate style sheets.\n\nadd() Tips\n\nFor all global style sheets (meaning the ones that will always be seen and will not be swapped out), simply use the add method as shown next to // [Global Styles].\n\nTo add preferred styles, do the same, but add a \u2018title\u2019.\n\nTo add the alternate styles, do the same as what we\u2019ve done to add preferred styles, but add the extra boolean and set it to true.\n\nNote following when adding style sheets\n\n\n\tMultiple global style sheets are allowed\n\tYou can only have one preferred style sheet (That\u2019s a browser rule)\n\tFeel free to add as many alternate style sheets as you like\n\n\nMoving on\n\nSimply add the following snippet to the <head> of your web document:\n\n<script type=\"text/javascript\" src=\"js/prototype.js\"></script>\n <script type=\"text/javascript\" src=\"js/common.js\"></script>\n <script type=\"text/javascript\" src=\"js/alternateStyles.js\"></script>\n <?php\n $styleSheet->drop();\n ?>\n\nNothing much to explain here. Just use your copy & paste powers.\n\nHow to Switch Styles\n\nWhether you knew it or not, this baby already has the built in \u2018ubobtrusive\u2019 functionality that lets you switch styles by the drop of any link with a class name of \u2018altCss\u2018. Just drop them where ever you like in your document as follows:\n\n<a class=\"altCss\" href=\"index.php?css=Bog_Standard\">Bog Standard</a>\n <a class=\"altCss\" href=\"index.php?css=Really_Small_Fonts\">Small Fonts</a>\n <a class=\"altCss\" href=\"index.php?css=Large_Fonts\">Large Fonts</a>\n\nTake special note where the file is linking to. Yep. Just linking right back to the page we\u2019re on. The only extra parameters we pass in is a variable called \u2018css\u2019 \u2013 and within that we append the names of our style sheets.\n\nAlso take very special note on the names of the style sheets have an under_score to take place of any spaces we might have.\n\nGo ahead\u2026 play around and change the style sheet on the example page. Try disabling JavaScript and refreshing your browser. Still works!\n\nCool eh?\n\nWell, I put this together in one night so it\u2019s still a work in progress and very beta. If you\u2019d like to hear more about it and its future development, be sure stop on by my site where I\u2019ll definitely be maintaining it.\n\nDownload the beta anyway\n\nWell this wouldn\u2019t be fun if there was nothing to download. So we\u2019re hooking you up so you don\u2019t go home (or logoff) unhappy\n\n Download U.D.A.S.S.S | V0.8\n\nMerry Christmas!\n\nThanks for listening and I hope U.D.A.S.S.S. has been well worth your time and will bring many years of Ajaxy Style Switchin\u2019 Fun!\n\nMany Blessings, Merry Christmas and have a great new year!", "year": "2005", "author": "Dustin Diaz", "author_slug": "dustindiaz", "published": "2005-12-18T00:00:00+00:00", "url": "https://24ways.org/2005/introducing-udasss/", "topic": "code"}
{"rowid": 327, "title": "Improving Form Accessibility with DOM Scripting", "contents": "The form label element is an incredibly useful little element \u2013 it lets you link the form field unquestionably with the descriptive label text that sits alongside or above it. This is a very useful feature for people using screen readers, but there are some problems with this element.\n\nWhat happens if you have one piece of data that, for various reasons (validation, the way your data is collected/stored etc), needs to be collected using several form elements?\n\nThe classic example is date of birth \u2013 ideally, you\u2019ll ask for the date of birth once but you may have three inputs, one each for day, month and year, that you also need to provide hints about the format required. The problem is that to be truly accessible you need to label each field. So you end up needing something to say \u201cthis is a date of birth\u201d, \u201cthis is the day field\u201d, \u201cthis is the month field\u201d and \u201cthis is the day field\u201d. Seems like overkill, doesn\u2019t it? And it can uglify a form no end.\n\nThere are various ways that you can approach it (and I think I\u2019ve seen them all). Some people omit the label and rely on the title attribute to help the user through; others put text in a label but make the text 1 pixel high and merging in to the background so that screen readers can still get that information. The most common method, though, is simply to set the label to not display at all using the CSS display:none property/value pairing (a technique which, for the time being, seems to work on most screen readers). But perhaps we can do more with this?\n\nThe technique I am suggesting as another alternative is as follows (here comes the pseudo-code):\n\n\n\tStart with a totally valid and accessible form\n\tEnsure that each form input has a label that is linked to its related form control\n\tApply a class to any label that you don\u2019t want to be visible (for example superfluous)\n\n\nThen, through the magic of unobtrusive JavaScript/the DOM, manipulate the page as follows once the page has loaded:\n\n\n\tFind all the label elements that are marked as superfluous and hide them\n\tFind out what input element each of these label elements is related to\n\tThen apply a hint about formatting required for input (gleaned from the original, now-hidden label text) \u2013 add it to the form input as default text\n\tFinally, add in a behaviour that clears or selects the default text (as you choose)\n\n\nSo, here\u2019s the theory put into practice \u2013 a date of birth, grouped using a fieldset, and with the behaviours added in using DOM, and here\u2019s the JavaScript that does the heavy lifting. \n\nBut why not just use display:none? As demonstrated at Juicy Studio, display:none seems to work quite well for hiding label elements. So why use a sledge hammer to crack a nut? In all honesty, this is something of an experiment, but consider the following:\n\n\n\tUsing the DOM, you can add extra levels of help, potentially across a whole form \u2013 or even range of forms \u2013 without necessarily increasing your markup (it goes beyond simply hiding labels)\n\tScreen readers today may  identify a label that is set not to display, but they may not in the future \u2013 this might provide a way around\n\tBy expanding this technique above, it might be possible to visually change the parent container that groups these items \u2013 in this case, a fieldset and legend, which are notoriously difficult to style consistently across different browsers \u2013 while still retaining the underlying semantic/logical structure\n\n\nWell, it\u2019s an idea to think about at least. How is it for you? How else might you use DOM scripting to improve the accessiblity or usability of your forms?", "year": "2005", "author": "Ian Lloyd", "author_slug": "ianlloyd", "published": "2005-12-03T00:00:00+00:00", "url": "https://24ways.org/2005/improving-form-accessibility-with-dom-scripting/", "topic": "code"}
{"rowid": 328, "title": "Swooshy Curly Quotes Without Images", "contents": "The problem\n\nTake a quote and render it within blockquote tags, applying big, funky and stylish curly quotes both at the beginning and the end without using any images \u2013 at all.\n\nThe traditional way\n\nFeint background images under the text, or an image in the markup housed in a little float. Often designers only use the opening curly quote as it\u2019s just too difficult to float a closing one.\n\nWhy is the traditional way bad?\n\nWell, for a start there are no actual curly quotes in the text (unless you\u2019re doing some nifty image replacement). Thus with CSS disabled you\u2019ll only have default blockquote styling to fall back on. Secondly, images don\u2019t resize, so scaling text will have no affect on your graphic curlies.\n\nThe solution\n\nUse really big text. Then it can be resized by the browser, resized using CSS, and even be restyled with a new font style if you fancy it. It\u2019ll also make sense when CSS is unavailable.\n\nThe problem\n\nCreating \u201cDrop Caps\u201d with CSS has been around for a while (Big Dan Cederholm discusses a neat solution in that first book of his), but drop caps are normal characters \u2013 the A to Z or 1 to 10 \u2013 and these can all be pulled into a set space and do not serve up a ton of whitespace, unlike punctuation characters.\n\nCurly quotes aren\u2019t like traditional characters. Like full stops, commas and hashes they float within the character space and leave lots of dead white space, making it bloody difficult to manipulate them with CSS. Styles generally fit around text, so cutting into that character is tricky indeed. Also, all that extra white space is going to push into the quote text and make it look pretty uneven. This grab highlights the actual character space:\n\n\n\nSee how this is emphasized when we add a normal alphabetical character within the span. This is what we\u2019re dealing with here:\n\n\n\nThen, there\u2019s size. Call in a curly quote at less than 300% font-size and it ain\u2019t gonna look very big. The white space it creates will be big enough, but the curlies will be way too small. We need more like 700% (as in this example) to make an impression, but that sure makes for a big character space.\n\nPrepare the curlies\n\nFirstly, remove the opening \u201c from the quote. Replace it with the opening curly quote character entity \u201c. Then replace the closing \u201c with the entity reference for that, which is \u201d. Now at least the curlies will look nice and swooshy.\n\nAdd the hooks\n\nTwo reasons why we aren\u2019t using :first-letter pseudo class to manipulate the curlies. Firstly, only CSS2-friendly browsers would get what we\u2019re doing, and secondly we need to affect the last \u201cletter\u201d of our text also \u2013 the closing curly quote.\n\nSo, add a span around the opening curly, and a second span around the closing curly, giving complete control of the characters:\n\n<blockquote><span class=\"bqstart\">\u201c</span>Speech marks. Curly quotes. That annoying thing cool people do with their fingers to emphasize a buzzword, shortly before you hit them.<span class=\"bqend\">\u201d</span></blockquote>\n\nSo far nothing will look any different, aside form the curlies looking a bit nicer. I know we\u2019ve just added extra markup, but the benefits as far as accessibility are concerned are good enough for me, and of course there are no images to download.\n\nThe CSS\n\nOK, easy stuff first. Our first rule .bqstart floats the span left, changes the color, and whacks the font-size up to an exuberant 700%. Our second rule .bqend does the same tricks aside from floating the curly to the right.\n\n.bqstart {\n     float: left;\n     font-size: 700%;\n     color: #FF0000;\n }\n\n .bqend {\n     float: right;\n     font-size: 700%;\n     color: #FF0000;\n }\n\nThat gives us this, which is rubbish. I\u2019ve highlighted the actual span area with outlines:\n\n\n\nNote that the curlies don\u2019t even fit inside the span! At this stage on IE 6 PC you won\u2019t even see the quotes, as it only places focus on what it thinks is in the div. Also, the quote text is getting all spangled.\n\nFiddle with margin and padding\n\nThink of that span outline box as a window, and that you need to position the curlies within that window in order to see them. By adding some small adjustments to the margin and padding it\u2019s possible to position the curlies exactly where you want them, and remove the excess white space by defining a height:\n\n.bqstart {\n     float: left;\n     height: 45px;\n     margin-top: -20px;\n     padding-top: 45px;\n     margin-bottom: -50px;\n     font-size: 700%;\n     color: #FF0000;\n }\n\n .bqend {\n     float: right;\n     height: 25px;\n     margin-top: 0px;\n     padding-top: 45px;\n     font-size: 700%;\n     color: #FF0000;\n }\n\nI wanted the blocks of my curlies to align with the quote text, whereas you may want them to dig in or stick out more. Be aware however that my positioning works for IE PC and Mac, Firefox and Safari. Too much tweaking seems to break the magic in various browsers at various times. Now things are fitting beautifully:\n\nI must admit that the heights, margins and spacing don\u2019t make a lot of sense if you analyze them. This was a real trial and error job. Get it working on Safari, and IE would fail. Sort IE, and Firefox would go weird.\n\nFinished\n\nThe final thing looks ace, can be resized, looks cool without styles, and can be edited with CSS at any time. Here\u2019s a real example (note that I\u2019m specifying Lucida Grande and then Verdana for my curlies):\n\n \u201cSpeech marks. Curly quotes. That annoying thing cool people do with their fingers to emphasize a buzzword, shortly before you hit them.\u201d\n\nBrowsers happy\n\nAs I said, too much tweaking of margins and padding can break the effect in some browsers. Even now, Firefox insists on dropping the closing curly by approximately 6 or 7 pixels, and if I adjust the padding for that, it\u2019ll crush it into the text on Safari or IE. Weird. Still, as I close now it seems solid through resizing tests on Safari, Firefox, Camino, Opera and IE PC and Mac. Lovely.\n\nIt\u2019s probably not perfect, but together we can beat the evil typographic limitations of the web and walk together towards a brighter, more aligned world. Merry Christmas.", "year": "2005", "author": "Simon Collison", "author_slug": "simoncollison", "published": "2005-12-21T00:00:00+00:00", "url": "https://24ways.org/2005/swooshy-curly-quotes-without-images/", "topic": "business"}
{"rowid": 314, "title": "Easy Ajax with Prototype", "contents": "There\u2019s little more impressive on the web today than a appropriate touch of Ajax. Used well, Ajax brings a web interface much closer to the experience of a desktop app, and can turn a bear of an task into a pleasurable activity.\n\nBut it\u2019s really hard, right? It involves all the nasty JavaScript that no one ever does often enough to get really good at, and the browser support is patchy, and urgh it\u2019s just so much damn effort. Well, the good news is that \u2013 ta-da \u2013 it doesn\u2019t have to be a headache. But man does it still look impressive. Here\u2019s how to amaze your friends.\n\nIntroducing prototype.js\n\nPrototype is a JavaScript framework by Sam Stephenson designed to help make developing dynamic web apps a whole lot easier. In basic terms, it\u2019s a JavaScript file which you link into your page that then enables you to do cool stuff.\n\nThere\u2019s loads of capability built in, a portion of which covers our beloved Ajax. The whole thing is freely distributable under an MIT-style license, so it\u2019s good to go. What a nice man that Mr Stephenson is \u2013 friends, let us raise a hearty cup of mulled wine to his good name. Cheers! sluurrrrp.\n\nFirst step is to download the latest Prototype and put it somewhere safe. I suggest underneath the Christmas tree.\n\nCutting to the chase\n\nBefore I go on and set up an example of how to use this, let\u2019s just get to the crux. Here\u2019s how Prototype enables you to make a simple Ajax call and dump the results back to the page:\n\nvar url = 'myscript.php';\nvar pars = 'foo=bar';\nvar target = 'output-div';\t\nvar myAjax = new Ajax.Updater(target, url, {method: 'get', parameters: pars});\n\nThis snippet of JavaScript does a GET to myscript.php, with the parameter foo=bar, and when a result is returned, it places it inside the element with the ID output-div on your page.\n\nKnocking up a basic example\n\nSo to get this show on the road, there are three files we need to set up in our site alongside prototype.js. Obviously we need a basic HTML page with prototype.js linked in. This is the page the user interacts with. Secondly, we need our own JavaScript file for the glue between the interface and the stuff Prototype is doing. Lastly, we need the page (a PHP script in my case) that the Ajax is going to make its call too.\n\nSo, to that basic HTML page for the user to interact with. Here\u2019s one I found whilst out carol singing:\n\n<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Strict//EN\"\n    \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd\">\n<html xmlns=\"http://www.w3.org/1999/xhtml\" xml:lang=\"en\" lang=\"en\">\n<head>\n    <meta http-equiv=\"Content-Type\" content=\"text/html; charset=utf-8\"/>\n    <title>Easy Ajax</title>\n    <script type=\"text/javascript\" src=\"prototype.js\"></script>\n    <script type=\"text/javascript\" src=\"ajax.js\"></script>\n</head> \n<body>\n    <form method=\"get\" action=\"greeting.php\" id=\"greeting-form\">\n        <div>\n            <label for=\"greeting-name\">Enter your name:</label>\n            <input id=\"greeting-name\" type=\"text\" />\n            <input id=\"greeting-submit\" type=\"submit\" value=\"Greet me!\" />\n        </div>\n        <div id=\"greeting\"></div>\n    </form>\n</body>\n</html>\n\nAs you can see, I\u2019ve linked in prototype.js, and also a file called ajax.js, which is where we\u2019ll be putting our glue. (Careful where you leave your glue, kids.)\n\nOur basic example is just going to take a name and then echo it back in the form of a seasonal greeting. There\u2019s a form with an input field for a name, and crucially a DIV (greeting) for the result of our call. You\u2019ll also notice that the form has a submit button \u2013 this is so that it can function as a regular form when no JavaScript is available. It\u2019s important not to get carried away and forget the basics of accessibility.\n\nMeanwhile, back at the server\n\nSo we need a script at the server which is going to take input from the Ajax call and return some output. This is normally where you\u2019d hook into a database and do whatever transaction you need to before returning a result. To keep this as simple as possible, all this example here will do is take the name the user has given and add it to a greeting message. Not exactly Web 2-point-HoHoHo, but there you have it.\n\nHere\u2019s a quick PHP script \u2013 greeting.php \u2013 that Santa brought me early.\n\n<?php\n     $the_name = htmlspecialchars($_GET['greeting-name']);\n     echo \"<p>Season's Greetings, $the_name!</p>\";\n?>\n\nYou\u2019ll perhaps want to do something a little more complex within your own projects. Just sayin\u2019.\n\nGluing it all together\n\nInside our ajax.js file, we need to hook this all together. We\u2019re going to take advantage of some of the handy listener routines and such that Prototype also makes available. The first task is to attach a listener to set the scene once the window has loaded. He\u2019s how we attach an onload event to the window object and get it to call a function named init():\n\nEvent.observe(window, 'load', init, false);\n\nNow we create our init() function to do our evil bidding. Its first job of the day is to hide the submit button for those with JavaScript enabled. After that, it attaches a listener to watch for the user typing in the name field.\n\nfunction init(){\n     $('greeting-submit').style.display = 'none';\n     Event.observe('greeting-name', 'keyup', greet, false);\n}\n\nAs you can see, this is going to make a call to a function called greet() onkeyup in the greeting-name field. That function looks like this:\n\nfunction greet(){\n     var url = 'greeting.php';\n     var pars = 'greeting-name='+escape($F('greeting-name'));\n     var target = 'greeting';\n     var myAjax = new Ajax.Updater(target, url, {method: 'get', parameters: pars});\n}\n\nThe key points to note here are that any user input needs to be escaped before putting into the parameters so that it\u2019s URL-ready. The target is the ID of the element on the page (a DIV in our case) which will be the recipient of the output from the Ajax call.\n\nThat\u2019s it\n\nNo, seriously. That\u2019s everything. Try the example. Amaze your friends with your 1337 Ajax sk1llz.", "year": "2005", "author": "Drew McLellan", "author_slug": "drewmclellan", "published": "2005-12-01T00:00:00+00:00", "url": "https://24ways.org/2005/easy-ajax-with-prototype/", "topic": "code"}
{"rowid": 335, "title": "Naughty or Nice? CSS Background Images", "contents": "Web Standards based development involves many things \u2013 using semantically sound HTML to provide structure to our documents or web applications, using CSS for presentation and layout, using JavaScript responsibly, and of course, ensuring that all that we do is accessible and interoperable to as many people and user agents as we can.\n\nThis we understand to be good. \n\nAnd it is good. \n\nExcept when we don\u2019t clearly think through the full implications of using those techniques.\n\nWhich often happens when time is short and we need to get things done.\n\nHere are some naughty examples of CSS background images with their nicer, more accessible counterparts.\n\nTransaction related messages\n\nI\u2019m as guilty of this as others (or, perhaps, I\u2019m the only one that has done this, in which case this can serve as my holiday season confessional)  We use lovely little icons to show status messages for a transaction to indicate if the action was successful, or was there a warning or error? For example:\n\n\u201cYour postal/zip code was not in the correct format.\u201d\n\nNotice that we place a nice little icon there, and use background colours and borders to convey a specific message: there was a problem that needs to be fixed. Notice that all of this visual information is now contained in the CSS rules for that div:\n\n<div class=\"error\">\n     <p>Your postal/zip code was not in the correct format.</p>\n </div>\n\n div.error {\n     background: #ffcccc url(../images/error_small.png) no-repeat 5px 4px;\n     color: #900;\n     border-top: 1px solid #c00;\n     border-bottom: 1px solid #c00;\n     padding: 0.25em 0.5em 0.25em 2.5em;\n     font-weight: bold;\n }\n\nUsing this approach also makes it very easy to create a div.success and div.warning CSS rules meaning we have less to change in our HTML.\n\nNice, right?\n\nNo. Naughty. \n\nVisual design communicates\n\nThe CSS is being used to convey very specific information. The choice of icon, the choice of background colour and borders tell us visually that there is something wrong. \n\nWith the icon as a background image \u2013 there is no way to specify any alt text for the icon, and significant meaning is lost. A screen reader user, for example, misses the fact that it is an \u201cerror.\u201d \n\nThe solution? Ask yourself: what is the bare minimum needed to indicate there was an error? Currently in the absence of CSS there will be no icon \u2013 which (I\u2019m hoping you agree) is critical to communicating there was an error.\n\nThe icon should be considered content and not simply presentational.\n\nThe borders and background colour are certainly much less critical \u2013 they belong in the CSS.\n\nLets change the code to place the image directly in the HTML and using appropriate alt text to better communicate the meaning of the icon to all users:\n\n<div class=\"bettererror\">\n     <img src=\"images/error_small.png\" alt=\"Error\" />\n     <p>Your postal/zip code was not in the correct format.</p>\n </div>\n\n div.bettererror {\n     background-color: #ffcccc;\n     color: #900;\n     border-top: 1px solid #c00;\n     border-bottom: 1px solid #c00;\n     padding: 0.25em 0.5em 0.25em 2.5em;\n     font-weight: bold;\n     position: relative;\n     min-height: 1.25em;\n }\n\n div.bettererror img {\n     display: block;\n     position: absolute;\n     left: 0.25em;\n     top: 0.25em;\n     padding: 0;\n     margin: 0;\n }\n\n div.bettererror p {\n     position: absolute;\n     left: 2.5em;\n     padding: 0;\n     margin: 0;\n }\n\nCompare these two examples of transactional messages\n\nStatus of a Record\n\nThis example is pretty straightforward. Consider the following: a real estate listing on a web site. There are three \u201cstates\u201d for a listing: new, normal, and sold. Here\u2019s how they look:\n\nExample of a New Listing\n\nExample of A Sold Listing\n\nIf we (forgive the pun) blindly apply the \u201cuse a CSS background image\u201d technique we clearly run into problems with the new and sold images \u2013 they actually contain content with no way to specify an alternative when placed in the CSS.\n\nIn this case of the \u201cnew\u201d image, we can use the same strategy as we used in the first example (the transaction result). The \u201cnew\u201d image should be considered content and is placed in the HTML as part of the <h2>...</h2> that identifies the listing.\n\nHowever when considering the \u201csold\u201d listing, there are less changes to be made to keep the same look by leaving the \u201cSOLD\u201d image as a background image and providing the equivalent information elsewhere in the listing \u2013 namely, right in the heading.\n\nFor those that can\u2019t see the background image, the status is communicated clearly and right away. A screen reader user that is navigating by heading or viewing a listing will know right away that a particular property is sold.\n\nOf note here is that in both cases (new and sold) placing the status near the beginning of the record helps with a zoom layout as well.\n\nBetter Example of A Sold Listing\n\nSummary\n\nRemember: in the holiday season, its what you give that counts!! Using CSS background images is easy and saves time for you but think of the children. And everyone else for that matter\u2026 \n\nCSS background images should only be used for presentational images, not for those that contain content (unless that content is already represented and readily available elsewhere).", "year": "2005", "author": "Derek Featherstone", "author_slug": "derekfeatherstone", "published": "2005-12-20T00:00:00+00:00", "url": "https://24ways.org/2005/naughty-or-nice-css-background-images/", "topic": "code"}
{"rowid": 334, "title": "Transitional vs. Strict Markup", "contents": "When promoting web standards, standardistas often talk about XHTML as being more strict than HTML. In a sense it is, since it requires that all elements are properly closed and that attribute values are quoted. But there are two flavours of XHTML 1.0 (three if you count the Frameset DOCTYPE, which is outside the scope of this article), defined by the Transitional and Strict DOCTYPEs. And HTML 4.01 also comes in those flavours.\n\nThe names reveal what they are about: Transitional DOCTYPEs are meant for those making the transition from older markup to modern ways. Strict DOCTYPEs are actually the default \u2013 the way HTML 4.01 and XHTML 1.0 were constructed to be used.\n\nA Transitional DOCTYPE may be used when you have a lot of legacy markup that cannot easily be converted to comply with a Strict DOCTYPE. But Strict is what you should be aiming for. It encourages, and in some cases enforces, the separation of structure and presentation, moving the presentational aspects from markup to CSS. From the HTML 4 Document Type Definition:\n\n\n\tThis is HTML 4.01 Strict DTD, which excludes the presentation attributes and elements that W3C expects to phase out as support for style sheets matures. Authors should use the Strict DTD when possible, but may use the Transitional DTD when support for presentation attribute and elements is required.\n\n\nAn additional benefit of using a Strict DOCTYPE is that doing so will ensure that browsers use their strictest, most standards compliant rendering modes.\n\nTommy Olsson provides a good summary of the benefits of using Strict over Transitional in Ten questions for Tommy Olsson at Web Standards Group:\n\n\n\tIn my opinion, using a Strict DTD, either HTML 4.01 Strict or XHTML 1.0 Strict, is far more important for the quality of the future web than whether or not there is an X in front of the name. The Strict DTD promotes a separation of structure and presentation, which makes a site so much easier to maintain.\n\n\nFor those looking to start using web standards and valid, semantic markup, it is important to understand the difference between Transitional and Strict DOCTYPEs. For complete listings of the differences between Transitional and Strict DOCTYPEs, see XHTML: Differences between Strict & Transitional, Comparison of Strict and Transitional XHTML, and XHTML1.0 Element Attributes by DTD.\n\nSome of the differences are more likely than others to cause problems for developers moving from a Transitional DOCTYPE to a Strict one, and I\u2019d like to mention a few of those.\n\nElements that are not allowed in Strict DOCTYPEs\n\n\n\tcenter\n\tfont\n\tiframe\n\tstrike\n\tu\n\n\nAttributes not allowed in Strict DOCTYPEs\n\n\n\talign (allowed on elements related to tables: col, colgroup, tbody, td, tfoot, th, thead, and tr)\n\tlanguage\n\tbackground\n\tbgcolor\n\tborder (allowed on table)\n\theight (allowed on img and object)\n\thspace\n\tname (allowed in HTML 4.01 Strict, not allowed on form and img in XHTML 1.0 Strict)\n\tnoshade\n\tnowrap\n\ttarget\n\ttext, link, vlink, and alink\n\tvspace\n\twidth (allowed on img, object, table, col, and colgroup)\n\n\nContent model differences\n\nAn element type\u2019s content model describes what may be contained by an instance of the element type. The most important difference in content models between Transitional and Strict is that blockquote, body, and form elements may only contain block level elements. A few examples:\n\n\n\ttext and images are not allowed immediately inside the body element, and need to be contained in a block level element like p or div\n\tinput elements must not be direct descendants of a form element\n\ttext in blockquote elements must be wrapped in a block level element like p or div\n\n\nGo Strict and move all presentation to CSS\n\nSomething that can be helpful when doing the transition from Transitional to Strict DOCTYPEs is to focus on what each element of the page you are working on is instead of how you want it to look.\n\nWorry about looks later and get the structure and semantics right first.", "year": "2005", "author": "Roger Johansson", "author_slug": "rogerjohansson", "published": "2005-12-13T00:00:00+00:00", "url": "https://24ways.org/2005/transitional-vs-strict-markup/", "topic": "code"}
{"rowid": 316, "title": "Have Your DOM and Script It Too", "contents": "When working with the XMLHttpRequest object it appears you can only go one of three ways: \n\n\n\tYou can stay true to the colorful moniker du jour and stick strictly to the responseXML property\n\tYou can play with proprietary \u2013 yet widely supported \u2013 fire and inject the value of responseText property into the innerHTML of an element of your choosing\n\tOr you can be eval() and parse JSON or arbitrary JavaScript delivered via responseText\n\n\nBut did you know that there\u2019s a fourth option giving you the best of the latter two worlds? Mint uses this unmentioned approach to grab fresh HTML and run arbitrary JavaScript simultaneously. Without relying on eval(). \u201cBut wait-\u201d, you might say, \u201cwhen would I need to do this?\u201d Besides the example below this technique is handy for things like tab groups that need initialization onload but miss the main onload event handler by a mile thanks to asynchronous scripting.\n\nConsider the problem\n\nOriginally Mint used option 2 to refresh or load new tabs into individual Pepper panes without requiring a full roundtrip to the server. This was all well and good until I introduced the new Client Mode which when enabled allows anyone to view a Mint installation without being logged in. If voyeurs are afoot as Client Mode is disabled, the next time they refresh a pane the entire login page is inserted into the current document. That\u2019s not very helpful so I needed a way to redirect the current document to the login page.\n\n\n\nEnter the solution\n\nWouldn\u2019t it be cool if browsers interpreted the contents of script tags crammed into innerHTML? Sure, but unfortunately, that just wasn\u2019t meant to be. However like the body element, image elements have an onload event handler. When the image has fully loaded the handler runs the code applied to it. See where I\u2019m going with this?\n\nBy tacking a tiny image (think single pixel, transparent spacer gif \u2013 shudder) onto the end of the HTML returned by our Ajax call, we can smuggle our arbitrary JavaScript into the existing document. The image is added to the DOM, and our stowaway can go to town.\n\n<p>This is the results of our Ajax call.</p>\n <img src=\"../images/loaded.gif\" alt=\"\" onload=\"alert('Now that I have your attention...');\" />\n\nPlease be neat\n\nSo we\u2019ve just jammed some meaningless cruft into our DOM. If our script does anything with images this addition could have some unexpected side effects. (Remember The Fly?) So in order to save that poor, unsuspecting element whose innerHTML we just swapped out from sharing Jeff Goldblum\u2019s terrible fate we should tidy up after ourselves. And by using the removeChild method we do just that.\n\n<p>This is the results of our Ajax call.</p>\n <img src=\"../images/loaded.gif\" alt=\"\" \n     onload=\"alert('Now that I have your attention...');this.parentNode.removeChild(this);\" />", "year": "2005", "author": "Shaun Inman", "author_slug": "shauninman", "published": "2005-12-24T00:00:00+00:00", "url": "https://24ways.org/2005/have-your-dom-and-script-it-too/", "topic": "code"}
{"rowid": 325, "title": "\"Z's not dead baby, Z's not dead\"", "contents": "While Mr. Moll and Mr. Budd have pipped me to the post with their predictions for 2006, I\u2019m sure they won\u2019t mind if I sneak in another. The use of positioning together with z-index will be one of next year\u2019s hot techniques \n\nBoth has been a little out of favour recently. For many, positioned layouts made way for the flexibility of floats. Developers I speak to often associate z-index with Dreamweaver\u2019s layers feature. But in combination with alpha transparency support for PNG images in IE7 and full implementation of position property values, the stacking of elements with z-index is going to be big. I\u2019m going to cover the basics of z-index and how it can be used to create designs which \u2018break out of the box\u2019.\n\nNo positioning? No Z!\n\nRemember geometry? The x axis represents the horizontal, the y axis represents the vertical. The z axis, which is where we get the z-index, represents /depth/. Elements which are stacked using z-index are stacked from front to back and z-index is only applied to elements which have their position property set to relative or absolute. No positioning, no z-index. Z-index values can be either negative or positive and it is the element with the highest z-index value appears closest to the viewer, regardless of its order in the source. Furthermore, if more than one element are given the same z-index, the element which comes last in source order comes out top of the pile. \n\nLet\u2019s take three <div>s.\n\n<div id=\"one\"></div>\n <div id=\"two\"></div>\n <div id=\"three\"></div>\n\n #one { \n     position: relative; \n     z-index: 3;\n }\n\n #two { \n     position: relative; \n     z-index: 1;\n }\n\n #three {\n     position: relative; \n     z-index: 2;\n }\n\n\n\nAs you can see, the <div> with the z-index of 3 will appear closest, even though it comes before its siblings in the source order. As these three <div>s have no defined positioning context in the form of a positioned parent such as a <div>, their stacking order is defined from the root element <html>. Simple stuff, but these building blocks are the basis on which we can create interesting interfaces (particularly when used in combination with image replacement and transparent PNGs).\n\nBrand building\n\nNow let\u2019s take three more basic elements, an <h1>, <blockquote> and <p>, all inside a branding <div> which acts a new positioning context. By enclosing them inside a positioned parent, we establish a new stacking order which is independent of either the root element or other positioning contexts on the page.\n\n<div id=\"branding\">\n     <h1>Worrysome.com</h1>\n     <blockquote><p>Don' worry 'bout a thing...</p></blockquote>\n     <p>Take the weight of the world off your shoulders.</p>\n </div>\n\nApplying a little positioning and z-index magic we can both set the position of these elements inside their positioning context and their stacking order. As we are going to use background images made from transparent PNGs, each element will allow another further down the stacking order to show through. This makes for some novel effects, particularly in liquid layouts.\n\n(Ed: We\u2019re using n below to represent whatever values you require for your specific design.) \n\n#branding {\n    position: relative;\n    width: n;\n    height: n;\n    background-image: url(n);\n }\n\n #branding>h1 {\n    position: absolute;\n    left: n;\n    top: n;\n    width: n;\n    height: n;\n    background-image: url(h1.png);\n    text-indent: n;\n }\n\n #branding>blockquote {\n    position: absolute;\n    left: n;\n    top: n;\n    width: n;\n    height: n;\n    background-image: url(bq.png);\n    text-indent: n;\n\n }\n\n #branding>p {\n    position: absolute;\n    right: n;\n    top: n;\n    width: n;\n    height: n;\n    background-image: url(p.png);\n    text-indent: n;\n }\n\nNext we can begin to see how the three elements build upon each other.\n\n\n1. Elements outlined\n\n\n2. Positioned elements overlayed to show context\n\n\n3. Our final result\n\nMultiple stacking orders\n\nNot only can elements within a positioning context be given a z-index, but those positioning contexts themselves can also be stacked.\n\n\nTwo positioning contexts, each with their own stacking order\n\nInterestingly each stacking order is independent of that of either the root element or its siblings and we can exploit this to make complex layouts from just a few semantic elements. This technique was used heavily on my recent redesign of Karova.com.\n\nDissecting part of Karova.com\n\nFirst the XHTML. The default template markup used for the site places <div id=\"nav_main\"> and <div id=\"content\"> as siblings inside their container.\n\n<div id=\"container\">\n     <div id=\"content\">\n          <h2></h2>\n          <p></p>\n     </div>\n     <div id=\"nav_main\"></div>\n </div>\n\nBy giving the navigation <div> a lower z-index than the content <div> we can ensure that the positioned content elements will always appear closest to the viewer, despite the fact that the navigation comes after the content in the source.\n\n#content { \n     position: relative; \n     z-index: 2; \n }\n\n #nav_main { \n     position: absolute; \n     z-index: 1; \n }\n\nNow applying absolute positioning with a negative top value to the <h2> and a higher z-index value than the following <p> ensures that the header sits not only on top of the navigation but also the styled paragraph which follows it.\n\nh2 {\n     position: absolute;\n     z-index: 200;\n     top: -n;\n }\n\n h2+p {\n     position: absolute;\n     z-index: 100;\n     margin-top: -n;\n     padding-top: n;\n }\n\n\nDissecting part of Karova.com\n\nYou can see the full effect in the wild on the Karova.com site.\n\nHave a great holiday season!", "year": "2005", "author": "Andy Clarke", "author_slug": "andyclarke", "published": "2005-12-16T00:00:00+00:00", "url": "https://24ways.org/2005/zs-not-dead-baby-zs-not-dead/", "topic": "design"}
{"rowid": 336, "title": "Practical Microformats with hCard", "contents": "You\u2019ve probably heard about microformats over the last few months. You may have even read the easily digestible introduction at Digital Web Magazine, but perhaps you\u2019ve not found time to actually implement much yet. That\u2019s understandable, as it can sometimes be difficult to see exactly what you\u2019re adding by applying a microformat to a page. Sure, you\u2019re semantically enhancing the information you\u2019re marking up, and the Semantic Web is a great idea and all, but what benefit is it right now, today? \n\nWell, the answer to that question is simple: you\u2019re adding lots of information that can be and is being used on the web here and now. The big ongoing battle amongst the big web companies if one of territory over information. Everyone\u2019s grasping for as much data as possible. Some of that information many of us are cautious to give away, but a lot of is happy to be freely available. Of the data you\u2019re giving away, it makes sense to give it as much meaning as possible, thus enabling anyone from your friends and family to the giant search company down the road to make the most of it.\n\nOk, enough of the waffle, let\u2019s get working.\n\nIntroducing hCard\n\nYou may have come across hCard. It\u2019s a microformat for describing contact information (or really address book information) from within your HTML. It\u2019s based on the vCard format, which is the format the contacts/address book program on your computer uses. All the usual fields are available \u2013 name, address, town, website, email, you name it.\n\nIf you\u2019re running Firefox and Greasemonkey (or if you can, just to try this out), install this user script. What it does is look for instances of the hCard microformat in a page, and then add in a link to pass any hCards it finds to a web service which will convert it to a vCard. Take a look at the About the author box at the bottom of this article. It\u2019s a hCard, so you should be able to click the icon the user script inserts and add me to your Outlook contacts or OS X Address Book with just a click.\n\nSo microformats are useful after all. Free microformats all round!\n\nImplementing hCard\n\nThis is the really easy bit. All the hCard microformat is, is a bunch of predefined class names that you apply to the markup you\u2019ve probably already got around your contact information. Let\u2019s take the example of the About the author box from this article. Here\u2019s how the markup looks without hCard:\n\n<div class=\"bio\">\n     <h3>About the author</h3>\n     <p>Drew McLellan is a web developer, author and no-good swindler from \n     just outside London, England. At the \n     <a href=\"http://www.webstandards.org/\">Web Standards Project</a> he works \n     on press, strategy and tools. Drew keeps a \n     <a href=\"http://www.allinthehead.com/\">personal weblog</a> covering web \n     development issues and themes.</p>\n</div>\n\nThis is a really simple example because there\u2019s only two key bits of address book information here:- my name and my website address. Let\u2019s push it a little and say that the Web Standards Project is the organisation I work for \u2013 that gives us Name, Company and URL.\n\nTo kick off an hCard, you need a containing object with a class of vcard. The div I already have with a class of bio is perfect for this \u2013 all it needs to do is contain the rest of the contact information.\n\nThe next thing to identify is my name. hCard uses a class of fn (meaning Full Name) to identify a name. As is this case there\u2019s no element surrounding my name, we can just use a span. These changes give us:\n\n<div class=\"bio vcard\">\n     <h3>About the author</h3>\n     <p><span class=\"fn\">Drew McLellan</span> is a web developer...\n\nThe two remaining items are my URL and the organisation I belong to. The class names designated for those are url and org respectively. As both of those items are links in this case, I can apply the classes to those links. So here\u2019s the finished hCard.\n\n<div class=\"bio vcard\">\n     <h3>About the author</h3>\n     <p><span class=\"fn\">Drew McLellan</span> is a web developer, author and \n     no-good swindler from just outside London, England. \n     At the <a class=\"org\" href=\"http://www.webstandards.org/\">Web Standards Project</a> \n     he works on press, strategy and tools. Drew keeps a \n     <a class=\"url\" href=\"http://www.allinthehead.com/\">personal weblog</a> covering web \n     development issues and themes.</p>\n</div>\n\nOK, that was easy. By just applying a few easy class names to the HTML I was already publishing, I\u2019ve implemented an hCard that right now anyone with Greasemonkey can click to add to their address book, that Google and Yahoo! and whoever else can index and work out important things like which websites are associated with my name if they so choose (and boy, will they so choose), and in the future who knows what. In terms of effort, practically nil.\n\nWhere next?\n\nSo that was a trivial example, but to be honest it doesn\u2019t really get much more complex even with the most pernickety permutations. Because hCard is based on vCard (a mature and well thought-out standard), it\u2019s all tried and tested. Here\u2019s some good next steps.\n\n\n\tPlay with the hCard Creator\n\tTake a deep breath and read the spec\n\tStart implementing hCard as you go on your own projects \u2013 it takes very little time\n\n\nhCard is just one of an ever-increasing number of microformats. If this tickled your fancy, I suggest subscribing to the microformats site in your RSS reader to keep in touch with new developments.\n\nWhat\u2019s the take-away?\n\nThe take-away is this. They may sound like just more Web 2-point-HoHoHo hype, but microformats are a well thought-out, and easy to implement way of adding greater depth to the information you publish online. They have some nice benefits right away \u2013 certainly at geek-level \u2013 but in the longer term they become much more significant. We\u2019ve been at this long enough to know that the web has a long, long memory and that what you publish today will likely be around for years. But putting the extra depth of meaning into your documents now you can help guard that they\u2019ll continue to be useful in the future, and not just a bunch of flat ASCII.", "year": "2005", "author": "Drew McLellan", "author_slug": "drewmclellan", "published": "2005-12-06T00:00:00+00:00", "url": "https://24ways.org/2005/practical-microformats-with-hcard/", "topic": "code"}