{"rowid": 334, "title": "Transitional vs. Strict Markup", "contents": "When promoting web standards, standardistas often talk about XHTML as being more strict than HTML. In a sense it is, since it requires that all elements are properly closed and that attribute values are quoted. But there are two flavours of XHTML 1.0 (three if you count the Frameset DOCTYPE, which is outside the scope of this article), defined by the Transitional and Strict DOCTYPEs. And HTML 4.01 also comes in those flavours.\n\nThe names reveal what they are about: Transitional DOCTYPEs are meant for those making the transition from older markup to modern ways. Strict DOCTYPEs are actually the default \u2013 the way HTML 4.01 and XHTML 1.0 were constructed to be used.\n\nA Transitional DOCTYPE may be used when you have a lot of legacy markup that cannot easily be converted to comply with a Strict DOCTYPE. But Strict is what you should be aiming for. It encourages, and in some cases enforces, the separation of structure and presentation, moving the presentational aspects from markup to CSS. From the HTML 4 Document Type Definition:\n\n\n\tThis is HTML 4.01 Strict DTD, which excludes the presentation attributes and elements that W3C expects to phase out as support for style sheets matures. Authors should use the Strict DTD when possible, but may use the Transitional DTD when support for presentation attribute and elements is required.\n\n\nAn additional benefit of using a Strict DOCTYPE is that doing so will ensure that browsers use their strictest, most standards compliant rendering modes.\n\nTommy Olsson provides a good summary of the benefits of using Strict over Transitional in Ten questions for Tommy Olsson at Web Standards Group:\n\n\n\tIn my opinion, using a Strict DTD, either HTML 4.01 Strict or XHTML 1.0 Strict, is far more important for the quality of the future web than whether or not there is an X in front of the name. The Strict DTD promotes a separation of structure and presentation, which makes a site so much easier to maintain.\n\n\nFor those looking to start using web standards and valid, semantic markup, it is important to understand the difference between Transitional and Strict DOCTYPEs. For complete listings of the differences between Transitional and Strict DOCTYPEs, see XHTML: Differences between Strict & Transitional, Comparison of Strict and Transitional XHTML, and XHTML1.0 Element Attributes by DTD.\n\nSome of the differences are more likely than others to cause problems for developers moving from a Transitional DOCTYPE to a Strict one, and I\u2019d like to mention a few of those.\n\nElements that are not allowed in Strict DOCTYPEs\n\n\n\tcenter\n\tfont\n\tiframe\n\tstrike\n\tu\n\n\nAttributes not allowed in Strict DOCTYPEs\n\n\n\talign (allowed on elements related to tables: col, colgroup, tbody, td, tfoot, th, thead, and tr)\n\tlanguage\n\tbackground\n\tbgcolor\n\tborder (allowed on table)\n\theight (allowed on img and object)\n\thspace\n\tname (allowed in HTML 4.01 Strict, not allowed on form and img in XHTML 1.0 Strict)\n\tnoshade\n\tnowrap\n\ttarget\n\ttext, link, vlink, and alink\n\tvspace\n\twidth (allowed on img, object, table, col, and colgroup)\n\n\nContent model differences\n\nAn element type\u2019s content model describes what may be contained by an instance of the element type. The most important difference in content models between Transitional and Strict is that blockquote, body, and form elements may only contain block level elements. A few examples:\n\n\n\ttext and images are not allowed immediately inside the body element, and need to be contained in a block level element like p or div\n\tinput elements must not be direct descendants of a form element\n\ttext in blockquote elements must be wrapped in a block level element like p or div\n\n\nGo Strict and move all presentation to CSS\n\nSomething that can be helpful when doing the transition from Transitional to Strict DOCTYPEs is to focus on what each element of the page you are working on is instead of how you want it to look.\n\nWorry about looks later and get the structure and semantics right first.", "year": "2005", "author": "Roger Johansson", "author_slug": "rogerjohansson", "published": "2005-12-13T00:00:00+00:00", "url": "https://24ways.org/2005/transitional-vs-strict-markup/", "topic": "code"}
{"rowid": 333, "title": "The Attribute Selector for Fun and (no ad) Profit", "contents": "If I had a favourite CSS selector, it would undoubtedly be the attribute selector (Ed: You really need to get out more). For those of you not familiar with the attribute selector, it allows you to style an element based on the existence, value or partial value of a specific attribute.\n\nAt it\u2019s very basic level you could use this selector to style an element with particular attribute, such as a title attribute.\n\nCSS\n\nIn this example I\u2019m going to make all elements with a title attribute grey. I am also going to give them a dotted bottom border that changes to a solid border on hover. Finally, for that extra bit of feedback, I will change the cursor to a question mark on hover as well. \n\nabbr[title] {\n color: #666;\n border-bottom: 1px dotted #666;\n }\n\n abbr[title]:hover {\n border-bottom-style: solid;\n cursor: help;\n }\n\nThis provides a nice way to show your site users that elements with title tags are special, as they contain extra, hidden information.\n\nMost modern browsers such as Firefox, Safari and Opera support the attribute selector. Unfortunately Internet Explorer 6 and below does not support the attribute selector, but that shouldn\u2019t stop you from adding nice usability embellishments to more modern browsers.\n\nInternet Explorer 7 looks set to implement this CSS2.1 selector, so expect to see it become more common over the next few years.\n\nStyling an element based on the existence of an attribute is all well and good, but it is still pretty limited. Where attribute selectors come into their own is their ability to target the value of an attribute. You can use this for a variety of interesting effects such as styling VoteLinks.\n\nVoteWhats?\n\nIf you haven\u2019t heard of VoteLinks, it is a microformat that allows people to show their approval or disapproval of a links destination by adding a pre-defined keyword to the rev attribute.\n\nFor instance, if you had a particularly bad meal at a restaurant, you could signify your dissaproval by adding a rev attribute with a value of vote-against.\n\nMomma Cherri's\n\nYou could then highlight these links by adding an image to the right of these links.\n\na[rev=\"vote-against\"]{\n padding-right: 20px;\n background: url(images/vote-against.png) no-repeat right top;\n}\n\nThis is a useful technique, but it will only highlight VoteLinks on sites you control. This is where user stylesheets come into effect. If you create a user stylesheet containing this rule, every site you visit that uses VoteLinks will receive your new style.\n\nCool huh?\n\nHowever my absolute favourite use for attribute selectors is as a lightweight form of ad blocking. Most online adverts conform to industry-defined sizes. So if you wanted to block all banner-ad sized images, you could simply add this line of code to your user stylesheet.\n\nimg[width=\"468\"][height=\"60\"],\nimg[width=\"468px\"][height=\"60px\"] {\n display: none !important;\n}\n\nTo hide any banner-ad sized element, such as flash movies, applets or iFrames, simply apply the above rule to every element using the universal selector.\n\n*[width=\"468\"][height=\"60\"], *[width=\"468px\"][height=\"60px\"] {\n display: none !important;\n}\n\nJust bare in mind when using this technique that you may accidentally hide something that isn\u2019t actually an advert; it just happens to be the same size.\n\nThe Interactive Advertising Bureau lists a number of common ad sizes. Using these dimensions, you can create stylesheet that blocks all the popular ad formats. Apply this as a user stylesheet and you never need to suffer another advert again.\n\nHere\u2019s wishing you a Merry, ad-free Christmas.", "year": "2005", "author": "Andy Budd", "author_slug": "andybudd", "published": "2005-12-11T00:00:00+00:00", "url": "https://24ways.org/2005/the-attribute-selector-for-fun-and-no-ad-profit/", "topic": "code"}
{"rowid": 321, "title": "Tables with Style", "contents": "It might not seem like it but styling tabular data can be a lot of fun. From a semantic point of view, there are plenty of elements to tie some style into. You have cells, rows, row groups and, of course, the table element itself. Adding CSS to a paragraph just isn\u2019t as exciting.\n\nWhere do I start?\n\nFirst, if you have some tabular data (you know, like a spreadsheet with rows and columns) that you\u2019d like to spiffy up, pop it into a table \u2014 it\u2019s rightful place!\n\nTo add more semantics to your table \u2014 and coincidentally to add more hooks for CSS \u2014 break up your table into row groups. There are three types of row groups: the header (thead), the body (tbody) and the footer (tfoot). You can only have one header and one footer but you can have as many table bodies as is appropriate.\n\nSample table example\n\nInspiration\n\nTable Striping\n\nTo improve scanning information within a table, a common technique is to style alternating rows. Also known as zebra tables. Whether you apply it using a class on every other row or turn to JavaScript to accomplish the task, a handy-dandy trick is to use a semi-transparent PNG as your background image. This is especially useful over patterned backgrounds. \n\ntbody tr.odd td {\n background:transparent url(background.png) repeat top left;\n }\n\n * html tbody tr.odd td {\n background:#C00;\n filter: progid:DXImageTransform.Microsoft.AlphaImageLoader(\n src='background.png', sizingMethod='scale');\n }\n\nWe turn off the default background and apply our PNG hack to have this work in Internet Explorer. \n\nStyling Columns\n\nDid you know you could style a column? That\u2019s right. You can add special column (col) or column group (colgroup) elements. With that you can add border or background styles to the column.\n\n
\n
\n
\n
\n ...\n\nCheck out the example.\n\nFun with Backgrounds\n\nPop in a tiled background to give your table some character! Internet Explorer\u2019s PNG hack unfortunately only works well when applied to a cell.\n\nTo figure out which background will appear over another, just remember the hierarchy:\n\n (bottom) Table \u2192 Column \u2192 Row Group \u2192 Row \u2192 Cell (top)\n\nThe Future is Bright\n\nOnce browser-makers start implementing CSS3, we\u2019ll have more power at our disposal. Just with :first-child and :last-child, you can pull off a scalable version of our previous table with rounded corners and all \u2014 unfortunately, only Firefox manages to pull this one off successfully. And the selector the masses are clamouring for, nth-child, will make zebra tables easy as eggnog.", "year": "2005", "author": "Jonathan Snook", "author_slug": "jonathansnook", "published": "2005-12-19T00:00:00+00:00", "url": "https://24ways.org/2005/tables-with-style/", "topic": "code"}
{"rowid": 328, "title": "Swooshy Curly Quotes Without Images", "contents": "The problem\n\nTake a quote and render it within blockquote tags, applying big, funky and stylish curly quotes both at the beginning and the end without using any images \u2013 at all.\n\nThe traditional way\n\nFeint background images under the text, or an image in the markup housed in a little float. Often designers only use the opening curly quote as it\u2019s just too difficult to float a closing one.\n\nWhy is the traditional way bad?\n\nWell, for a start there are no actual curly quotes in the text (unless you\u2019re doing some nifty image replacement). Thus with CSS disabled you\u2019ll only have default blockquote styling to fall back on. Secondly, images don\u2019t resize, so scaling text will have no affect on your graphic curlies.\n\nThe solution\n\nUse really big text. Then it can be resized by the browser, resized using CSS, and even be restyled with a new font style if you fancy it. It\u2019ll also make sense when CSS is unavailable.\n\nThe problem\n\nCreating \u201cDrop Caps\u201d with CSS has been around for a while (Big Dan Cederholm discusses a neat solution in that first book of his), but drop caps are normal characters \u2013 the A to Z or 1 to 10 \u2013 and these can all be pulled into a set space and do not serve up a ton of whitespace, unlike punctuation characters.\n\nCurly quotes aren\u2019t like traditional characters. Like full stops, commas and hashes they float within the character space and leave lots of dead white space, making it bloody difficult to manipulate them with CSS. Styles generally fit around text, so cutting into that character is tricky indeed. Also, all that extra white space is going to push into the quote text and make it look pretty uneven. This grab highlights the actual character space:\n\n\n\nSee how this is emphasized when we add a normal alphabetical character within the span. This is what we\u2019re dealing with here:\n\n\n\nThen, there\u2019s size. Call in a curly quote at less than 300% font-size and it ain\u2019t gonna look very big. The white space it creates will be big enough, but the curlies will be way too small. We need more like 700% (as in this example) to make an impression, but that sure makes for a big character space.\n\nPrepare the curlies\n\nFirstly, remove the opening \u201c from the quote. Replace it with the opening curly quote character entity \u201c. Then replace the closing \u201c with the entity reference for that, which is \u201d. Now at least the curlies will look nice and swooshy.\n\nAdd the hooks\n\nTwo reasons why we aren\u2019t using :first-letter pseudo class to manipulate the curlies. Firstly, only CSS2-friendly browsers would get what we\u2019re doing, and secondly we need to affect the last \u201cletter\u201d of our text also \u2013 the closing curly quote.\n\nSo, add a span around the opening curly, and a second span around the closing curly, giving complete control of the characters:\n\n
\u201cSpeech marks. Curly quotes. That annoying thing cool people do with their fingers to emphasize a buzzword, shortly before you hit them.\u201d
\n\nSo far nothing will look any different, aside form the curlies looking a bit nicer. I know we\u2019ve just added extra markup, but the benefits as far as accessibility are concerned are good enough for me, and of course there are no images to download.\n\nThe CSS\n\nOK, easy stuff first. Our first rule .bqstart floats the span left, changes the color, and whacks the font-size up to an exuberant 700%. Our second rule .bqend does the same tricks aside from floating the curly to the right.\n\n.bqstart {\n float: left;\n font-size: 700%;\n color: #FF0000;\n }\n\n .bqend {\n float: right;\n font-size: 700%;\n color: #FF0000;\n }\n\nThat gives us this, which is rubbish. I\u2019ve highlighted the actual span area with outlines:\n\n\n\nNote that the curlies don\u2019t even fit inside the span! At this stage on IE 6 PC you won\u2019t even see the quotes, as it only places focus on what it thinks is in the div. Also, the quote text is getting all spangled.\n\nFiddle with margin and padding\n\nThink of that span outline box as a window, and that you need to position the curlies within that window in order to see them. By adding some small adjustments to the margin and padding it\u2019s possible to position the curlies exactly where you want them, and remove the excess white space by defining a height:\n\n.bqstart {\n float: left;\n height: 45px;\n margin-top: -20px;\n padding-top: 45px;\n margin-bottom: -50px;\n font-size: 700%;\n color: #FF0000;\n }\n\n .bqend {\n float: right;\n height: 25px;\n margin-top: 0px;\n padding-top: 45px;\n font-size: 700%;\n color: #FF0000;\n }\n\nI wanted the blocks of my curlies to align with the quote text, whereas you may want them to dig in or stick out more. Be aware however that my positioning works for IE PC and Mac, Firefox and Safari. Too much tweaking seems to break the magic in various browsers at various times. Now things are fitting beautifully:\n\nI must admit that the heights, margins and spacing don\u2019t make a lot of sense if you analyze them. This was a real trial and error job. Get it working on Safari, and IE would fail. Sort IE, and Firefox would go weird.\n\nFinished\n\nThe final thing looks ace, can be resized, looks cool without styles, and can be edited with CSS at any time. Here\u2019s a real example (note that I\u2019m specifying Lucida Grande and then Verdana for my curlies):\n\n \u201cSpeech marks. Curly quotes. That annoying thing cool people do with their fingers to emphasize a buzzword, shortly before you hit them.\u201d\n\nBrowsers happy\n\nAs I said, too much tweaking of margins and padding can break the effect in some browsers. Even now, Firefox insists on dropping the closing curly by approximately 6 or 7 pixels, and if I adjust the padding for that, it\u2019ll crush it into the text on Safari or IE. Weird. Still, as I close now it seems solid through resizing tests on Safari, Firefox, Camino, Opera and IE PC and Mac. Lovely.\n\nIt\u2019s probably not perfect, but together we can beat the evil typographic limitations of the web and walk together towards a brighter, more aligned world. Merry Christmas.", "year": "2005", "author": "Simon Collison", "author_slug": "simoncollison", "published": "2005-12-21T00:00:00+00:00", "url": "https://24ways.org/2005/swooshy-curly-quotes-without-images/", "topic": "business"}
{"rowid": 331, "title": "Splintered Striper", "contents": "Back in March 2004, David F. Miller demonstrated a little bit of DOM scripting magic in his A List Apart article Zebra Tables.\n\nHis script programmatically adds two alternating CSS background colours to table rows, making them more readable and visually pleasing, while saving the document author the tedious task of manually assigning the styling to large static data tables.\n\nAlthough David\u2019s original script performs its duty well, it is nonetheless very specific and limited in its application. It only:\n\n\n\tworks on a single table, identified by its id, with at least a single tbody section\n\tassigns a background colour\n\tallows two colours for odd and even rows\n\tacts on data cells, rather than rows, and then only if they have no class or background colour already defined\n\n\nTaking it further\n\nIn a recent project I found myself needing to apply a striped effect to a medium sized unordered list. Instead of simply modifying the Zebra Tables code for this particular case, I decided to completely recode the script to make it more generic.\n\nBeing more general purpose, the function in my splintered striper experiment is necessarily more complex. Where the original script only expected a single parameter (the id of the target table), the new function is called as follows:\n\nstriper('[parent element tag]','[parent element class or null]','[child element tag]','[comma separated list of classes]')\n\nThis new, fairly self-explanatory function:\n\n\n\ttargets any type of parent element (and, if specified, only those with a certain class)\n\tassigns two or more classes (rather than just two background colours) to the child elements inside the parent\n\tpreserves any existing classes already assigned to the child elements\n\n\nSee it in action\n\nView the demonstration page for three usage examples. For simplicity\u2019s sake, we\u2019re making the calls to the striper function from the body\u2019s onload attribute. In a real deployment situation, we would look at attaching a behaviour to the onload programmatically \u2014 just remember that, as we need to pass variables to the striper function, this would involve creating a wrapper function which would then be attached\u2026something like:\n\nfunction stripe() {\n striper('tbody','splintered','tr','odd,even');\n}\n\nwindow.onload=stripe;\n\nA final thought\n\nJust because the function is called striper does not mean that it\u2019s limited to purely applying a striped look; as it\u2019s more of a general purpose \u201calternating class assignment\u201d script, you can achieve a whole variety of effects with it.", "year": "2005", "author": "Patrick Lauke", "author_slug": "patricklauke", "published": "2005-12-15T00:00:00+00:00", "url": "https://24ways.org/2005/splintered-striper/", "topic": "code"}
{"rowid": 317, "title": "Putting the World into \"World Wide Web\"", "contents": "Despite the fact that the Web has been international in scope from its inception, the predominant mass of Web sites are written in English or another left-to-right language. Sites are typically designed visually for Western culture, and rely on an enormous body of practices for usability, information architecture and interaction design that are by and large centric to the Western world.\n\nThere are certainly many reasons this is true, but as more and more Web sites realize the benefits of bringing their products and services to diverse, global markets, the more demand there will be on Web designers and developers to understand how to put the World into World Wide Web.\n\nInternationalization\n\nAccording to the W3C, Internationalization is:\n\n\n\t\u201c\u2026the design and development of a product, application or document content that enables easy localization for target audiences that vary in culture, region, or language.\u201d\n\n\nMany Web designers and developers have at least heard, if not read, about Internationalization. We understand that the Web is in fact worldwide, but many of us never have the opportunity to work with Internationalization. Or, when we do, think of it in purely technical terms, such as \u201cwhich character set do I use?\u201d\n\nAt first glance, it might seem to many that Internationalization is the act of making Web sites available to international audiences. And while that is in fact true, this isn\u2019t done by broad-stroking techniques and technologies. Instead, it involves a far more narrow understanding of geographical, cultural and linguistic differences in specific areas of the world. This is referred to as localization and is the act of making a Web site make sense in the context of the region, culture and language(s) the people using the site are most familiar with.\n\nInternationalization itself includes the following technical tasks:\n\n\n\tEnsuring no barrier exists to the localization of sites. Of critical importance in the planning stages of a site for Internationalized audiences, the role of the developer is to ensure that no barrier exists. This means being able to perform such tasks as enabling Unicode and making sure legacy character encodings are properly handled.\n\tPreparing markup and CSS with Internationalization in mind. The earlier in the site development process this occurs, the better. Issues such as ensuring that you can support bidirectional text, identifying language, and using CSS to support non-Latin typographic features.\n\tEnabling code to support local, regional, language or culturally related references. Examples in this category would include time/date formats, localization of calendars, numbering systems, sorting of lists and managing international forms of addresses.\n\tEmpowering the user. Sites must be architected so the user can easily choose or implement the localized alternative most appropriate to them.\n\n\nLocalization\n\nAccording to the W3C, Localization is the:\n\n\n\t\u2026adaptation of a product, application or document content to meet the language, cultural and other requirements of a specific target market (a \u201clocale\u201d).\n\n\nSo here\u2019s where we get down to thinking about the more sociological and anthropological concerns. Some of the primary localization issues are:\n\n\n\tNumeric formats. Different languages and cultures use numbering systems unlike ours. So, any time we need to use numbers, such as in an ordered list, we have to have a means of representing the accurate numbering system for the locale in question.\n\tMoney, honey! That\u2019s right. I\u2019ve got a pocketful of ugly U.S. dollars (why is U.S. money so unimaginative?). But I also have a drawer full of Japanese Yen, Australian Dollars, and Great British Pounds. Currency, how it\u2019s calculated and how it\u2019s represented is always a consideration when dealing with localization.\n\tUsing symbols, icons and colors properly. Using certain symbols or icons on sites where they might offend or confuse is certainly not in the best interest of a site that wants to sell or promote a product, service or information type. Moreover, the colors we use are surprisingly persuasive \u2013 or detrimental. Think about colors that represent death, for example. In many parts of Asia, white is the color of death. In most of the Western world, black represents death. For Catholic Europe, shades of purple (especially lavender) have represented Christ on the cross and mourning since at least Victorian times. When Walt Disney World Europe launched an ad campaign using a lot of purple and very glitzy imagery, millions of dollars were lost as a result of this seeming subtle issue. Instead of experiencing joy and celebration at the ads, the European audience, particularly the French, found the marketing to be overly American, aggressive, depressing and basically unappealing. Along with this and other cultural blunders, Disney Europe has become a well-known case study for businesses wishing to become international. By failing to understand localization differences, and how powerful color and imagery act on the human psyche, designers and developers are put to more of a disadvantage when attempting to communicate with a given culture.\n\tChoosing appropriate references to objects and ideas. What seems perfectly natural in one culture in terms of visual objects and ideas can get confused in another environment. One of my favorite cases of this has to do with Gerber baby food. In the U.S., the baby food is marketed using a cute baby on the package. Most people in the U.S. culturally do not make an immediate association that what is being represented on the label is what is inside the container. However, when Gerber expanded to Africa, where many people don\u2019t read, and where visual associations are less abstract, people made the inference that a baby on the cover of a jar of food represented what is in fact in the jar. You can imagine how confused and even angry people became. Using such approaches as a marketing ploy in the wrong locale can and will render the marketing a failure.\n\n\nAs you can see, the act of localization is one that can have profound impact on the success of a business or organization as it seeks to become available to more and more people across the globe.\n\nRethinking Design in the Context of Culture\n\nWhile well-educated designers and those individuals working specifically for companies that do a lot of localization understand these nuances, most of us don\u2019t get exposed to these ideas. Yet, we begin to see how necessary it becomes to have an awareness of not just the technical aspects of Internationalization, but the socio-cultural ones within localization.\n\nWhat\u2019s more, the bulk of information we have when it comes to designing sites typically comes from studies and work done on sites built in English and promoted to Western culture at large. We\u2019re making a critical mistake by not including diverse languages and cultural issues within our usability and information architecture studies.\n\nConsider the following design from the BBC:\n\n\n\nIn this case, we\u2019re dealing with English, which is read left to right. We are also dealing with U.K. cultural norms. Notice the following:\n\n\n\tLocation of of navigation\n\tUse of the color red\n\tUse of diverse symbols\n\tMix of symbols, icons and photos\n\tLocation of Search\n\n\nNow look at this design, which is the Arabic version of the BBC News, read right to left, and dealing with cultural norms within the Arabic-speaking world.\n\n\n\nNotice the following:\n\n\n\tLocation of of navigation (location switches to the right)\n\tUse of the color blue (blue is considered the \u201csafest\u201d global color)\n\tNo use of symbols and icons whatsoever\n\tLimitation of imagery to photos\n\tIn most cases, the photos show people, not objects\n\tLocation of Search\n\n\nAdmittedly, some choices here are more obvious than others in terms of why they were made. But one thing that stands out is that the placement of search is the same for both versions. Is this the result of a specific localization decision, or based on what we believe about usability at large? This is exactly the kind of question that designers working on localization have to seek answers to, instead of relying on popular best practices and belief systems that exist for English-only Web sites.\n\nIt\u2019s a Wide World Web After All\n\nFrom this brief article on Internationalization, it becomes apparent that the art and science of creating sites for global audiences requires a lot more preparation and planning than one might think at first glance. Developers and designers not working to address these issues specifically due to time or awareness will do well to at least understand the basic process of making sites more culturally savvy, and better prepared for any future global expansion.\n\nOne thing is certain: We not only are on a dramatic learning curve for designing and developing Web sites as it is, the need to localize sites is going to become more and more a part of the day to day work. Understanding aspects of what makes a site international and local will not only help you expand your skill set and make you more marketable, but it will also expand your understanding of the world and the people within it, how they relate to and use the Web, and how you can help make their experience the best one possible.", "year": "2005", "author": "Molly Holzschlag", "author_slug": "mollyholzschlag", "published": "2005-12-09T00:00:00+00:00", "url": "https://24ways.org/2005/putting-the-world-into-world-wide-web/", "topic": "ux"}
{"rowid": 336, "title": "Practical Microformats with hCard", "contents": "You\u2019ve probably heard about microformats over the last few months. You may have even read the easily digestible introduction at Digital Web Magazine, but perhaps you\u2019ve not found time to actually implement much yet. That\u2019s understandable, as it can sometimes be difficult to see exactly what you\u2019re adding by applying a microformat to a page. Sure, you\u2019re semantically enhancing the information you\u2019re marking up, and the Semantic Web is a great idea and all, but what benefit is it right now, today? \n\nWell, the answer to that question is simple: you\u2019re adding lots of information that can be and is being used on the web here and now. The big ongoing battle amongst the big web companies if one of territory over information. Everyone\u2019s grasping for as much data as possible. Some of that information many of us are cautious to give away, but a lot of is happy to be freely available. Of the data you\u2019re giving away, it makes sense to give it as much meaning as possible, thus enabling anyone from your friends and family to the giant search company down the road to make the most of it.\n\nOk, enough of the waffle, let\u2019s get working.\n\nIntroducing hCard\n\nYou may have come across hCard. It\u2019s a microformat for describing contact information (or really address book information) from within your HTML. It\u2019s based on the vCard format, which is the format the contacts/address book program on your computer uses. All the usual fields are available \u2013 name, address, town, website, email, you name it.\n\nIf you\u2019re running Firefox and Greasemonkey (or if you can, just to try this out), install this user script. What it does is look for instances of the hCard microformat in a page, and then add in a link to pass any hCards it finds to a web service which will convert it to a vCard. Take a look at the About the author box at the bottom of this article. It\u2019s a hCard, so you should be able to click the icon the user script inserts and add me to your Outlook contacts or OS X Address Book with just a click.\n\nSo microformats are useful after all. Free microformats all round!\n\nImplementing hCard\n\nThis is the really easy bit. All the hCard microformat is, is a bunch of predefined class names that you apply to the markup you\u2019ve probably already got around your contact information. Let\u2019s take the example of the About the author box from this article. Here\u2019s how the markup looks without hCard:\n\n
\n
About the author
\n
Drew McLellan is a web developer, author and no-good swindler from \n just outside London, England. At the \n Web Standards Project he works \n on press, strategy and tools. Drew keeps a \n personal weblog covering web \n development issues and themes.
\n
\n\nThis is a really simple example because there\u2019s only two key bits of address book information here:- my name and my website address. Let\u2019s push it a little and say that the Web Standards Project is the organisation I work for \u2013 that gives us Name, Company and URL.\n\nTo kick off an hCard, you need a containing object with a class of vcard. The div I already have with a class of bio is perfect for this \u2013 all it needs to do is contain the rest of the contact information.\n\nThe next thing to identify is my name. hCard uses a class of fn (meaning Full Name) to identify a name. As is this case there\u2019s no element surrounding my name, we can just use a span. These changes give us:\n\n
\n
About the author
\n
Drew McLellan is a web developer...\n\nThe two remaining items are my URL and the organisation I belong to. The class names designated for those are url and org respectively. As both of those items are links in this case, I can apply the classes to those links. So here\u2019s the finished hCard.\n\n
\n
About the author
\n
Drew McLellan is a web developer, author and \n no-good swindler from just outside London, England. \n At the Web Standards Project \n he works on press, strategy and tools. Drew keeps a \n personal weblog covering web \n development issues and themes.
\n
\n\nOK, that was easy. By just applying a few easy class names to the HTML I was already publishing, I\u2019ve implemented an hCard that right now anyone with Greasemonkey can click to add to their address book, that Google and Yahoo! and whoever else can index and work out important things like which websites are associated with my name if they so choose (and boy, will they so choose), and in the future who knows what. In terms of effort, practically nil.\n\nWhere next?\n\nSo that was a trivial example, but to be honest it doesn\u2019t really get much more complex even with the most pernickety permutations. Because hCard is based on vCard (a mature and well thought-out standard), it\u2019s all tried and tested. Here\u2019s some good next steps.\n\n\n\tPlay with the hCard Creator\n\tTake a deep breath and read the spec\n\tStart implementing hCard as you go on your own projects \u2013 it takes very little time\n\n\nhCard is just one of an ever-increasing number of microformats. If this tickled your fancy, I suggest subscribing to the microformats site in your RSS reader to keep in touch with new developments.\n\nWhat\u2019s the take-away?\n\nThe take-away is this. They may sound like just more Web 2-point-HoHoHo hype, but microformats are a well thought-out, and easy to implement way of adding greater depth to the information you publish online. They have some nice benefits right away \u2013 certainly at geek-level \u2013 but in the longer term they become much more significant. We\u2019ve been at this long enough to know that the web has a long, long memory and that what you publish today will likely be around for years. But putting the extra depth of meaning into your documents now you can help guard that they\u2019ll continue to be useful in the future, and not just a bunch of flat ASCII.", "year": "2005", "author": "Drew McLellan", "author_slug": "drewmclellan", "published": "2005-12-06T00:00:00+00:00", "url": "https://24ways.org/2005/practical-microformats-with-hcard/", "topic": "code"}
{"rowid": 335, "title": "Naughty or Nice? CSS Background Images", "contents": "Web Standards based development involves many things \u2013 using semantically sound HTML to provide structure to our documents or web applications, using CSS for presentation and layout, using JavaScript responsibly, and of course, ensuring that all that we do is accessible and interoperable to as many people and user agents as we can.\n\nThis we understand to be good. \n\nAnd it is good. \n\nExcept when we don\u2019t clearly think through the full implications of using those techniques.\n\nWhich often happens when time is short and we need to get things done.\n\nHere are some naughty examples of CSS background images with their nicer, more accessible counterparts.\n\nTransaction related messages\n\nI\u2019m as guilty of this as others (or, perhaps, I\u2019m the only one that has done this, in which case this can serve as my holiday season confessional) We use lovely little icons to show status messages for a transaction to indicate if the action was successful, or was there a warning or error? For example:\n\n\u201cYour postal/zip code was not in the correct format.\u201d\n\nNotice that we place a nice little icon there, and use background colours and borders to convey a specific message: there was a problem that needs to be fixed. Notice that all of this visual information is now contained in the CSS rules for that div:\n\n
\n
Your postal/zip code was not in the correct format.
\n
\n\n div.error {\n background: #ffcccc url(../images/error_small.png) no-repeat 5px 4px;\n color: #900;\n border-top: 1px solid #c00;\n border-bottom: 1px solid #c00;\n padding: 0.25em 0.5em 0.25em 2.5em;\n font-weight: bold;\n }\n\nUsing this approach also makes it very easy to create a div.success and div.warning CSS rules meaning we have less to change in our HTML.\n\nNice, right?\n\nNo. Naughty. \n\nVisual design communicates\n\nThe CSS is being used to convey very specific information. The choice of icon, the choice of background colour and borders tell us visually that there is something wrong. \n\nWith the icon as a background image \u2013 there is no way to specify any alt text for the icon, and significant meaning is lost. A screen reader user, for example, misses the fact that it is an \u201cerror.\u201d \n\nThe solution? Ask yourself: what is the bare minimum needed to indicate there was an error? Currently in the absence of CSS there will be no icon \u2013 which (I\u2019m hoping you agree) is critical to communicating there was an error.\n\nThe icon should be considered content and not simply presentational.\n\nThe borders and background colour are certainly much less critical \u2013 they belong in the CSS.\n\nLets change the code to place the image directly in the HTML and using appropriate alt text to better communicate the meaning of the icon to all users:\n\n
\n \n
Your postal/zip code was not in the correct format.
\n
\n\n div.bettererror {\n background-color: #ffcccc;\n color: #900;\n border-top: 1px solid #c00;\n border-bottom: 1px solid #c00;\n padding: 0.25em 0.5em 0.25em 2.5em;\n font-weight: bold;\n position: relative;\n min-height: 1.25em;\n }\n\n div.bettererror img {\n display: block;\n position: absolute;\n left: 0.25em;\n top: 0.25em;\n padding: 0;\n margin: 0;\n }\n\n div.bettererror p {\n position: absolute;\n left: 2.5em;\n padding: 0;\n margin: 0;\n }\n\nCompare these two examples of transactional messages\n\nStatus of a Record\n\nThis example is pretty straightforward. Consider the following: a real estate listing on a web site. There are three \u201cstates\u201d for a listing: new, normal, and sold. Here\u2019s how they look:\n\nExample of a New Listing\n\nExample of A Sold Listing\n\nIf we (forgive the pun) blindly apply the \u201cuse a CSS background image\u201d technique we clearly run into problems with the new and sold images \u2013 they actually contain content with no way to specify an alternative when placed in the CSS.\n\nIn this case of the \u201cnew\u201d image, we can use the same strategy as we used in the first example (the transaction result). The \u201cnew\u201d image should be considered content and is placed in the HTML as part of the
...
that identifies the listing.\n\nHowever when considering the \u201csold\u201d listing, there are less changes to be made to keep the same look by leaving the \u201cSOLD\u201d image as a background image and providing the equivalent information elsewhere in the listing \u2013 namely, right in the heading.\n\nFor those that can\u2019t see the background image, the status is communicated clearly and right away. A screen reader user that is navigating by heading or viewing a listing will know right away that a particular property is sold.\n\nOf note here is that in both cases (new and sold) placing the status near the beginning of the record helps with a zoom layout as well.\n\nBetter Example of A Sold Listing\n\nSummary\n\nRemember: in the holiday season, its what you give that counts!! Using CSS background images is easy and saves time for you but think of the children. And everyone else for that matter\u2026 \n\nCSS background images should only be used for presentational images, not for those that contain content (unless that content is already represented and readily available elsewhere).", "year": "2005", "author": "Derek Featherstone", "author_slug": "derekfeatherstone", "published": "2005-12-20T00:00:00+00:00", "url": "https://24ways.org/2005/naughty-or-nice-css-background-images/", "topic": "code"}
{"rowid": 322, "title": "Introduction to Scriptaculous Effects", "contents": "Gather around kids, because this year, much like in that James Bond movie with Denise Richards, Christmas is coming early\u2026 in the shape of scrumptuous smooth javascript driven effects at your every whim.\n\nNow what I\u2019m going to do, is take things down a notch. Which is to say, you don\u2019t need to know much beyond how to open a text file and edit it to follow this article. Personally, I for instance can\u2019t code to save my life.\n\nWell, strictly speaking, that\u2019s not entirely true. If my life was on the line, and the code needed was really simple and I wasn\u2019t under any time constraints, then yeah maybe I could hack my way out of it\n\nBut my point is this: I\u2019m not a programmer in the traditional sense of the word. In fact, what I do best, is scrounge code off of other people, take it apart and then put it back together with duct tape, chewing gum and dumb blind luck.\n\nNo, don\u2019t run! That happens to be a good thing in this case. You see, we\u2019re going to be implementing some really snazzy effects (which are considerably more relevant than most people are willing to admit) on your site, and we\u2019re going to do it with the aid of Thomas Fuchs\u2019 amazing Script.aculo.us library. And it will be like stealing candy from a child.\n\nWhat Are We Doing?\n\nI\u2019m going to show you the very basics of implementing the Script.aculo.us javascript library\u2019s Combination Effects. These allow you to fade elements on your site in or out, slide them up and down and so on.\n\nWhy Use Effects at All?\n\nBefore get started though, let me just take a moment to explain how I came to see smooth transitions as something more than smoke and mirror-like effects included for with little more motive than to dazzle and make parents go \u2018uuh, snazzy\u2019.\n\nEarlier this year, I had the good fortune of meeting the kind, gentle and quite knowledgable Matt Webb at a conference here in Copenhagen where we were both speaking (though I will be the first to admit my little talk on Open Source Design was vastly inferior to Matt\u2019s talk). Matt held a talk called Fixing Broken Windows (based on the Broken Windows theory), which really made an impression on me, and which I have since then referred back to several times.\n\nYou can listen to it yourself, as it\u2019s available from Archive.org. Though since Matt\u2019s session uses many visual examples, you\u2019ll have to rely on your imagination for some of the examples he runs through during it. Also, I think it looses audio for a few seconds every once in a while.\n\nAnyway, one of the things Matt talked a lot about, was how our eyes are wired to react to movement. The world doesn\u2019t flickr. It doesn\u2019t disappear or suddenly change and force us to look for the change. Things move smoothly in the real world. They do not pop up.\n\nHow it Works\n\nOnce the necessary files have been included, you trigger an effect by pointing it at the ID of an element. Simple as that.\n\nImplementing the Effects\n\nSo now you know why I believe these effects have a place in your site, and that\u2019s half the battle. Because you see, actually getting these effects up and running, is deceptively simple.\n\nFirst, go and download the latest version of the library (as of this writing, it\u2019s version 1.5 rc5). Unzip itand open it up.\n\nNow we\u2019re going to bypass the instructions in the readme file. Script.aculo.us can do a bunch of quite advanced things, but all we really want from it is its effects. And by sidestepping the rest of the features, we can shave off roughly 80KB of unnecessary javascript, which is well worth it if you ask me.\n\nAs with Drew\u2019s article on Easy Ajax with Prototype, script.aculo.us also uses the Prototype framework by Sam Stephenson. But contrary to Drew\u2019s article, you don\u2019t have to download Prototype, as a version comes bundled with script.aculo.us (though feel free to upgrade to the latest version if you so please).\n\nSo in the unzipped folder, containing the script.aculo.us files and folder, go into \u2018lib\u2019 and grab the \u2018prototype.js\u2019 file. Move it to whereever you want to store the javascript files. Then fetch the \u2018effects.js\u2019 file from the \u2018src\u2019 folder and put it in the same place.\n\nTo make things even easier for you to get this up and running, I have prepared a small javascript snippet which does some checking to see what you\u2019re trying to do. The script.aculo.us effects are all either \u2018turn this off\u2019 or \u2018turn this on\u2019. What this snippet does, is check to see what state the target currently has (is it on or off?) and then use the necessary effect.\n\nYou can either skip to the end and download the example code, or copy and paste this code into a file manually (I\u2019ll refer to that file as combo.js):\n\nEffect.OpenUp = function(element) {\n element = $(element);\n new Effect.BlindDown(element, arguments[1] || {});\n }\n\n Effect.CloseDown = function(element) {\n element = $(element);\n new Effect.BlindUp(element, arguments[1] || {});\n }\n\n Effect.Combo = function(element) {\n element = $(element);\n if(element.style.display == 'none') { \n new Effect.OpenUp(element, arguments[1] || {}); \n }else { \n new Effect.CloseDown(element, arguments[1] || {}); \n }\n }\n\nCurrently, this code uses the BlindUp and BlindDown code, which I personally like, but there\u2019s nothing wrong with you changing the effect-type into one of the other effects available.\n\nNow, include the three files in the header of your code, like so:\n\n\n\n\n\nNow insert the element you want to use the effect on, like so:\n\n
Lorem ipsum dolor sit amet.
\n\nThe above element will start out invisible, and when triggered will be revealed. If you want it to start visible, simply remove the style parameter.\n\nAnd now for the trigger \n\nClick Here\n\nAnd that, is pretty much it. Clicking the link should unfold the DIV targeted by the effect, in this case \u2018content\u2019.\n\nEffect Options\n\nNow, it gets a bit long-haired though. The documentation for script.aculo.us is next to non-existing, and because of that you\u2019ll have to do some digging yourself to appreciate the full potentialof these effects.\n\nFirst of all, what kind of effects are available? Well you can go to the demo page and check them out, or you can open the \u2018effects.js\u2019 file and have a look around, something I recommend doing regardlessly, to gain an overview of what exactly you\u2019re dealing with.\n\nIf you dissect it for long enough, you can even distill some of the options available for the various effects. In the case of the BlindUp and BlindDown effect, which we\u2019re using in our example (as triggered from combo.js), one of the things that would be interesting to play with would be the duration of the effect. If it\u2019s too long, it will feel slow and unresponsive. Too fast and it will be imperceptible.\n\nYou set the options like so:\n\nClick Here\n\nThe change from the previous link being the inclusion of , {duration: .2}. In this case, I have lowered the duration to 0.2 second, to really make it feel snappy.\n\nYou can also go all-out and turn on all the bells and whistles of the Blind effect like so (slowed down to a duration of three seconds so you can see what\u2019s going on):\n\nClick Here\n\nConclusion\n\nAnd that\u2019s pretty much it. The rest is a matter of getting to know the rest of the effects and their options as well as finding out just when and where to use them. Remember the ancient Chinese saying: Less is more.\n\nDownload Example\n\nI have prepared a very basic example, which you can download and use as a reference point.", "year": "2005", "author": "Michael Heilemann", "author_slug": "michaelheilemann", "published": "2005-12-12T00:00:00+00:00", "url": "https://24ways.org/2005/introduction-to-scriptaculous-effects/", "topic": "code"}
{"rowid": 323, "title": "Introducing UDASSS!", "contents": "Okay. What\u2019s that mean?\n\nUnobtrusive Degradable Ajax Style Sheet Switcher!\n\nBoy are you in for treat today \u2018cause we\u2019re gonna have a whole lotta Ajaxifida Unobtrucitosity CSS swappin\u2019 Fun!\n\nOkay are you really kidding? Nope. I\u2019ve even impressed myself on this one. Unfortunately, I don\u2019t have much time to tell you the ins and outs of what I actually did to get this to work. We\u2019re talking JavaScript, CSS, PHP\u2026Ajax. But don\u2019t worry about that. I\u2019ve always believed that a good A.P.I. is an invisible A.P.I\u2026 and this I felt I achieved. The only thing you need to know is how it works and what to do.\n\nA Quick Introduction Anyway\u2026\n\nFirst of all, the idea is very simple. I wanted something just like what Paul Sowden put together in \nAlternative Style: Working With Alternate Style Sheets from Alistapart Magazine EXCEPT a few minor (not-so-minor actually) differences which I\u2019ve listed briefly below:\n\n\n\n\tAllow users to switch styles without JavaScript enabled (degradable)\n\tPreventing the F.O.U.C. before the window \u2018load\u2019 when getting preferred styles\n\tKeep the JavaScript entirely off our markup (no onclick\u2019s or onload\u2019s)\n\tMake it very very easy to implement (ok, Paul did that too)\n\n\nWhat I did to achieve this was used server-side cookies instead of JavaScript cookies. Hence, PHP. However this isn\u2019t a \u201cPHP style switcher\u201d \u2013 which is where Ajax comes in. For the extreme technical folks, no, there is no xml involved here, or even a callback response. I only say Ajax because everyone knows what \u2018it\u2019 means. With that said, it\u2019s the Ajax that sets the cookies \u2018on the fly\u2019. Got it? Awesome!\n\nWhat you need\n\nLuckily, I\u2019ve done the work for you. It\u2019s all packaged up in a nice zip file (at the end\u2026keep reading for now) \u2013 so from here on out, \njust follow these instructions\n\nAs I\u2019ve mentioned, one of the things we\u2019ll be working with is PHP. So, first things first, open up a file called index and save it with a \u2018.php\u2019 extension.\n\nNext, place the following text at the top of your document (even above your DOCTYPE)\n\nadd('css/global.css','screen,projection'); // [Global Styles]\n $styleSheet->add('css/preferred.css','screen,projection','Wog Standard'); // [Preferred Styles]\n $styleSheet->add('css/alternate.css','screen,projection','Tiny Fonts',true); // [Alternate Styles]\n $styleSheet->add('css/alternate2.css','screen,projection','Big O Fonts',true); // // [Alternate Styles]\n $styleSheet->getPreferredStyles();\n ?>\n\nThe way this works is REALLY EASY. Pay attention closely.\n\nNotice in the first line we\u2019ve included our style-switcher.php file.\n\nNext we instantiate a PHP class called AlternateStyles() which will allow us to configure our style sheets. \nSo for kicks, let\u2019s just call our object $styleSheet\n\nAs part of the AlternateStyles object, there lies a public method called add. So naturally with our $styleSheet object, we can call it to (da \u2013 da-da-da!) Add Style Sheets!\n\nHow the add() method works\n\nThe add method takes in a possible four arguments, only one is required. However, you\u2019ll want to add some\u2026 since the whole point is working with alternate style sheets.\n\n$path can simply be a uri, absolute, or relative path to your style sheet. $media adds a media attribute to your style sheets. $title gives a name to your style sheets (via title attribute).$alternate (which shows boolean) simply tells us that these are the alternate style sheets.\n\nadd() Tips\n\nFor all global style sheets (meaning the ones that will always be seen and will not be swapped out), simply use the add method as shown next to // [Global Styles].\n\nTo add preferred styles, do the same, but add a \u2018title\u2019.\n\nTo add the alternate styles, do the same as what we\u2019ve done to add preferred styles, but add the extra boolean and set it to true.\n\nNote following when adding style sheets\n\n\n\tMultiple global style sheets are allowed\n\tYou can only have one preferred style sheet (That\u2019s a browser rule)\n\tFeel free to add as many alternate style sheets as you like\n\n\nMoving on\n\nSimply add the following snippet to the of your web document:\n\n\n \n \n drop();\n ?>\n\nNothing much to explain here. Just use your copy & paste powers.\n\nHow to Switch Styles\n\nWhether you knew it or not, this baby already has the built in \u2018ubobtrusive\u2019 functionality that lets you switch styles by the drop of any link with a class name of \u2018altCss\u2018. Just drop them where ever you like in your document as follows:\n\nBog Standard\n Small Fonts\n Large Fonts\n\nTake special note where the file is linking to. Yep. Just linking right back to the page we\u2019re on. The only extra parameters we pass in is a variable called \u2018css\u2019 \u2013 and within that we append the names of our style sheets.\n\nAlso take very special note on the names of the style sheets have an under_score to take place of any spaces we might have.\n\nGo ahead\u2026 play around and change the style sheet on the example page. Try disabling JavaScript and refreshing your browser. Still works!\n\nCool eh?\n\nWell, I put this together in one night so it\u2019s still a work in progress and very beta. If you\u2019d like to hear more about it and its future development, be sure stop on by my site where I\u2019ll definitely be maintaining it.\n\nDownload the beta anyway\n\nWell this wouldn\u2019t be fun if there was nothing to download. So we\u2019re hooking you up so you don\u2019t go home (or logoff) unhappy\n\n Download U.D.A.S.S.S | V0.8\n\nMerry Christmas!\n\nThanks for listening and I hope U.D.A.S.S.S. has been well worth your time and will bring many years of Ajaxy Style Switchin\u2019 Fun!\n\nMany Blessings, Merry Christmas and have a great new year!", "year": "2005", "author": "Dustin Diaz", "author_slug": "dustindiaz", "published": "2005-12-18T00:00:00+00:00", "url": "https://24ways.org/2005/introducing-udasss/", "topic": "code"}
{"rowid": 327, "title": "Improving Form Accessibility with DOM Scripting", "contents": "The form label element is an incredibly useful little element \u2013 it lets you link the form field unquestionably with the descriptive label text that sits alongside or above it. This is a very useful feature for people using screen readers, but there are some problems with this element.\n\nWhat happens if you have one piece of data that, for various reasons (validation, the way your data is collected/stored etc), needs to be collected using several form elements?\n\nThe classic example is date of birth \u2013 ideally, you\u2019ll ask for the date of birth once but you may have three inputs, one each for day, month and year, that you also need to provide hints about the format required. The problem is that to be truly accessible you need to label each field. So you end up needing something to say \u201cthis is a date of birth\u201d, \u201cthis is the day field\u201d, \u201cthis is the month field\u201d and \u201cthis is the day field\u201d. Seems like overkill, doesn\u2019t it? And it can uglify a form no end.\n\nThere are various ways that you can approach it (and I think I\u2019ve seen them all). Some people omit the label and rely on the title attribute to help the user through; others put text in a label but make the text 1 pixel high and merging in to the background so that screen readers can still get that information. The most common method, though, is simply to set the label to not display at all using the CSS display:none property/value pairing (a technique which, for the time being, seems to work on most screen readers). But perhaps we can do more with this?\n\nThe technique I am suggesting as another alternative is as follows (here comes the pseudo-code):\n\n\n\tStart with a totally valid and accessible form\n\tEnsure that each form input has a label that is linked to its related form control\n\tApply a class to any label that you don\u2019t want to be visible (for example superfluous)\n\n\nThen, through the magic of unobtrusive JavaScript/the DOM, manipulate the page as follows once the page has loaded:\n\n\n\tFind all the label elements that are marked as superfluous and hide them\n\tFind out what input element each of these label elements is related to\n\tThen apply a hint about formatting required for input (gleaned from the original, now-hidden label text) \u2013 add it to the form input as default text\n\tFinally, add in a behaviour that clears or selects the default text (as you choose)\n\n\nSo, here\u2019s the theory put into practice \u2013 a date of birth, grouped using a fieldset, and with the behaviours added in using DOM, and here\u2019s the JavaScript that does the heavy lifting. \n\nBut why not just use display:none? As demonstrated at Juicy Studio, display:none seems to work quite well for hiding label elements. So why use a sledge hammer to crack a nut? In all honesty, this is something of an experiment, but consider the following:\n\n\n\tUsing the DOM, you can add extra levels of help, potentially across a whole form \u2013 or even range of forms \u2013 without necessarily increasing your markup (it goes beyond simply hiding labels)\n\tScreen readers today may identify a label that is set not to display, but they may not in the future \u2013 this might provide a way around\n\tBy expanding this technique above, it might be possible to visually change the parent container that groups these items \u2013 in this case, a fieldset and legend, which are notoriously difficult to style consistently across different browsers \u2013 while still retaining the underlying semantic/logical structure\n\n\nWell, it\u2019s an idea to think about at least. How is it for you? How else might you use DOM scripting to improve the accessiblity or usability of your forms?", "year": "2005", "author": "Ian Lloyd", "author_slug": "ianlloyd", "published": "2005-12-03T00:00:00+00:00", "url": "https://24ways.org/2005/improving-form-accessibility-with-dom-scripting/", "topic": "code"}
{"rowid": 316, "title": "Have Your DOM and Script It Too", "contents": "When working with the XMLHttpRequest object it appears you can only go one of three ways: \n\n\n\tYou can stay true to the colorful moniker du jour and stick strictly to the responseXML property\n\tYou can play with proprietary \u2013 yet widely supported \u2013 fire and inject the value of responseText property into the innerHTML of an element of your choosing\n\tOr you can be eval() and parse JSON or arbitrary JavaScript delivered via responseText\n\n\nBut did you know that there\u2019s a fourth option giving you the best of the latter two worlds? Mint uses this unmentioned approach to grab fresh HTML and run arbitrary JavaScript simultaneously. Without relying on eval(). \u201cBut wait-\u201d, you might say, \u201cwhen would I need to do this?\u201d Besides the example below this technique is handy for things like tab groups that need initialization onload but miss the main onload event handler by a mile thanks to asynchronous scripting.\n\nConsider the problem\n\nOriginally Mint used option 2 to refresh or load new tabs into individual Pepper panes without requiring a full roundtrip to the server. This was all well and good until I introduced the new Client Mode which when enabled allows anyone to view a Mint installation without being logged in. If voyeurs are afoot as Client Mode is disabled, the next time they refresh a pane the entire login page is inserted into the current document. That\u2019s not very helpful so I needed a way to redirect the current document to the login page.\n\n\n\nEnter the solution\n\nWouldn\u2019t it be cool if browsers interpreted the contents of script tags crammed into innerHTML? Sure, but unfortunately, that just wasn\u2019t meant to be. However like the body element, image elements have an onload event handler. When the image has fully loaded the handler runs the code applied to it. See where I\u2019m going with this?\n\nBy tacking a tiny image (think single pixel, transparent spacer gif \u2013 shudder) onto the end of the HTML returned by our Ajax call, we can smuggle our arbitrary JavaScript into the existing document. The image is added to the DOM, and our stowaway can go to town.\n\n
This is the results of our Ajax call.
\n \n\nPlease be neat\n\nSo we\u2019ve just jammed some meaningless cruft into our DOM. If our script does anything with images this addition could have some unexpected side effects. (Remember The Fly?) So in order to save that poor, unsuspecting element whose innerHTML we just swapped out from sharing Jeff Goldblum\u2019s terrible fate we should tidy up after ourselves. And by using the removeChild method we do just that.\n\n
This is the results of our Ajax call.
\n ", "year": "2005", "author": "Shaun Inman", "author_slug": "shauninman", "published": "2005-12-24T00:00:00+00:00", "url": "https://24ways.org/2005/have-your-dom-and-script-it-too/", "topic": "code"}
{"rowid": 315, "title": "Edit-in-Place with Ajax", "contents": "Back on day one we looked at using the Prototype library to take all the hard work out of making a simple Ajax call. While that was fun and all, it didn\u2019t go that far towards implementing something really practical. We dipped our toes in, but haven\u2019t learned to swim yet.\n\nSo here is swimming lesson number one. Anyone who\u2019s used Flickr to publish their photos will be familiar with the edit-in-place system used for quickly amending titles and descriptions on photographs. Hovering over an item turns its background yellow to indicate it is editable. A simple click loads the text into an edit box, right there on the page.\n\n\n\nPrototype includes all sorts of useful methods to help reproduce something like this for our own projects. As well as the simple Ajax GETs we learned how to do last time, we can also do POSTs (which we\u2019ll need here) and a whole bunch of manipulations to the user interface \u2013 all through simple library calls. Here\u2019s what we\u2019re building, so let\u2019s do it.\n\nGetting Started\n\nThere are two major components to this process; the user interface manipulation and the Ajax call itself. Our set-up is much the same as last time (you may wish to read the first article if you\u2019ve not already done so). We have a basic HTML page which links in the prototype.js file and our own editinplace.js. Here\u2019s what Santa dropped down my chimney: \n\n\n \n \n \n Edit-in-Place with Ajax\n \n \n \n \n\n
Edit-in-place
\n
Dashing through the snow on a one horse open sleigh.
\n \n \n\nSo that\u2019s our page. The editable item is going to be the
called desc. The process goes something like this:\n\n\n\tHighlight the area onMouseOver\n\tClear the highlight onMouseOut\n\tIf the user clicks, hide the area and replace with a