articles
151 rows where topic = "code" sorted by contents descending
This data as json, CSV (advanced)
| Link | rowid | title | contents ▲ | year | author | author_slug | published | url | topic |
|---|---|---|---|---|---|---|---|---|---|
| 138 | 138 | Rounded Corner Boxes the CSS3 Way | If you’ve been doing CSS for a while you’ll know that there are approximately 3,762 ways to create a rounded corner box. The simplest techniques rely on the addition of extra mark-up directly to your page, while the more complicated ones add the mark-up though DOM manipulation. While these techniques are all very interesting, they do seem somewhat of a kludge. The goal of CSS is to separate structure from presentation, yet here we are adding superfluous mark-up to our code in order to create a visual effect. The reason we are doing this is simple. CSS2.1 only allows a single background image per element. Thankfully this looks set to change with the addition of multiple background images into the CSS3 specification. With CSS3 you’ll be able to add not one, not four, but eight background images to a single element. This means you’ll be able to create all kinds of interesting effects without the need of those additional elements. While the CSS working group still seem to be arguing over the exact syntax, Dave Hyatt went ahead and implemented the currently suggested mechanism into Safari. The technique is fiendishly simple, and I think we’ll all be a lot better off once the W3C stop arguing over the details and allow browser vendors to get on and provide the tools we need to build better websites. To create a CSS3 rounded corner box, simply start with your box element and apply your 4 corner images, separated by commas. .box { background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right.gif); } We don’t want these background images to repeat, which is the normal behaviour, so lets set all their background-repeat properties to no-repeat. .box { background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right.gif); background-repeat: no-repeat, no-repeat, no-repeat, no-repeat; } Lastly, we need to define the positioning of each corner image. .box { background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right… | 2006 | Andy Budd | andybudd | 2006-12-04T00:00:00+00:00 | https://24ways.org/2006/rounded-corner-boxes-the-css3-way/ | code |
| 308 | 308 | How to Make a Chrome Extension to Delight (or Troll) Your Friends | If you’re like me, you grew up drawing mustaches on celebrities. Every photograph was subject to your doodling wrath, and your brilliance was taken to a whole new level with computer programs like Microsoft Paint. The advent of digital cameras meant that no one was safe from your handiwork, especially not your friends. And when you finally got your hands on Photoshop, you spent hours maniacally giggling at your artistic genius. But today is different. You’re a serious adult with important things to do and a reputation to uphold. You keep up with modern web techniques and trends, and have little time for fun other than a random Giphy on Slack… right? Nope. If there’s one thing 2016 has taught me, it’s that we—the self-serious, world-changing tech movers and shakers of the universe—haven’t changed one bit from our younger, more delightable selves. How do I know? This year I created a Chrome extension called Tabby Cat and watched hundreds of thousands of people ditch productivity for randomly generated cats. Tabby Cat replaces your new tab page with an SVG cat featuring a silly name like “Stinky Dinosaur” or “Tiny Potato”. Over time, the cats collect goodies that vary in absurdity from fishbones to lawn flamingos to Raybans. Kids and adults alike use this extension, and analytics show the majority of use happens Monday through Friday from 9-5. The popularity of Tabby Cat has convinced me there’s still plenty of room in our big, grown-up hearts for fun. Today, we’re going to combine the formula behind Tabby Cat with your intrinsic desire to delight (or troll) your friends, and create a web app that generates your friends with random objects and environments of your choosing. You can publish it as a Chrome extension to replace your new tab, or simply host it as a website and point to it with the New Tab Redirect extension. Here’s a sneak peek at my final result featuring my partner, my cat, and I in cheerfully weird accessories. Your result will look however you want it to. Along the way, we’ll cover how to bui… | 2016 | Leslie Zacharkow | lesliezacharkow | 2016-12-08T00:00:00+00:00 | https://24ways.org/2016/how-to-make-a-chrome-extension/ | code |
| 79 | 79 | Responsive Images: What We Thought We Needed | If you were to read a web designer’s Christmas wish list, it would likely include a solution for displaying images responsively. For those concerned about users downloading unnecessary image data, or serving images that look blurry on high resolution displays, finding a solution has become a frustrating quest. Having experimented with complex and sometimes devilish hacks, consensus is forming around defining new standards that could solve this problem. Two approaches have emerged. The <picture> element markup pattern was proposed by Mat Marquis and is now being developed by the Responsive Images Community Group. By providing a means of declaring multiple sources, authors could use media queries to control which version of an image is displayed and under what conditions: <picture width="500" height="500"> <source media="(min-width: 45em)" src="large.jpg"> <source media="(min-width: 18em)" src="med.jpg"> <source src="small.jpg"> <img src="small.jpg" alt=""> <p>Accessible text</p> </picture> A second proposal put forward by Apple, the srcset attribute, uses a more concise syntax intended for use with the <img> element, although it could be compatible with the <picture> element too. This would allow authors to provide a set of images, but with the decision on which to use left to the browser: <img src="fallback.jpg" alt="" srcset="small.jpg 640w 1x, small-hd.jpg 640w 2x, med.jpg 1x, med-hd.jpg 2x "> Enter Scrooge Men’s courses will foreshadow certain ends, to which, if persevered in, they must lead. Ebenezer Scrooge Given the complexity of this issue, there’s a heated debate about which is the best option. Yet code belies a certain truth. That both feature verbose and opaque syntax, I’m not sure either should find its way into the browser – especially as alternative approaches have yet to be fully explored. So, as if to dampen the festive cheer, here are five reasons why I believe both proposals are largely redundant. 1. We need better formats, not more markup As we move away from designs defi… | 2012 | Paul Lloyd | paulrobertlloyd | 2012-12-11T00:00:00+00:00 | https://24ways.org/2012/responsive-images-what-we-thought-we-needed/ | code |
| 121 | 121 | Hide And Seek in The Head | If you want your JavaScript-enhanced pages to remain accessible and understandable to scripted and noscript users alike, you have to think before you code. Which functionalities are required (ie. should work without JavaScript)? Which ones are merely nice-to-have (ie. can be scripted)? You should only start creating the site when you’ve taken these decisions. Special HTML elements Once you have a clear idea of what will work with and without JavaScript, you’ll likely find that you need a few HTML elements for the noscript version only. Take this example: A form has a nifty bit of Ajax that automatically and silently sends a request once the user enters something in a form field. However, in order to preserve accessibility, the user should also be able to submit the form normally. So the form should have a submit button in noscript browsers, but not when the browser supports sufficient JavaScript. Since the button is meant for noscript browsers, it must be hard-coded in the HTML: <input type="submit" value="Submit form" id="noScriptButton" /> When JavaScript is supported, it should be removed: var checkJS = [check JavaScript support]; window.onload = function () { if (!checkJS) return; document.getElementById('noScriptButton').style.display = 'none'; } Problem: the load event Although this will likely work fine in your testing environment, it’s not completely correct. What if a user with a modern, JavaScript-capable browser visits your page, but has to wait for a huge graphic to load? The load event fires only after all assets, including images, have been loaded. So this user will first see a submit button, but then all of a sudden it’s removed. That’s potentially confusing. Fortunately there’s a simple solution: play a bit of hide and seek in the <head>: var checkJS = [check JavaScript support]; if (checkJS) { document.write('<style>#noScriptButton{display: none}</style>'); } First, check if the browser supports enough JavaScript. If it does, document.write an extra <style> element that hides the b… | 2006 | Peter-Paul Koch | ppk | 2006-12-06T00:00:00+00:00 | https://24ways.org/2006/hide-and-seek-in-the-head/ | code |
| 195 | 195 | Levelling Up for Junior Developers | If you are a junior developer starting out in the web industry, things can often seem a little daunting. There are so many things to learn, and as soon as you’ve learnt one framework or tool, there seems to be something new out there. I am lucky enough to lead a team of developers building applications for the web. During a recent One to One meeting with one of our junior developers, he asked me about a learning path and the basic fundamentals that every developer should know. After a bit of digging around, I managed to come up with a (not so exhaustive) list of principles that was shared with him. In this article, I will share the list with you, and hopefully help you level up from junior developer and become a better developer all round. This list doesn’t focus on an particular programming language, but rather coding concepts as a whole. The idea behind this list is that whether you are a front-end developer, back-end developer, full stack developer or just a curious one, these principles apply to everyone that writes code. I have tried to be technology agnostic, so that you can use these tips to guide you, whatever your tech stack might be. Without any further ado and in no particular order, let’s get started. Refactoring code like a boss The Boy Scouts have a rule that goes “always leave the campground cleaner than you found it.” This rule can be applied to code too and ensures that you leave code cleaner than you found it. As a junior developer, it’s almost certain that you will either create or come across older code that could be improved. The resources below are a guide that will help point you in the right direction. My favourite book on this subject has to be Clean Code by Robert C. Martin. It’s a must read for anyone writing code as it helps you identify bad code and shows you techniques that you can use to improve existing code. If you find that in your day to day work you deal with a lot of legacy code, Improving Existing Technology through Refactoring is another useful read. Design Patterns are a… | 2017 | Dean Hume | deanhume | 2017-12-05T00:00:00+00:00 | https://24ways.org/2017/levelling-up-for-junior-developers/ | code |
| 333 | 333 | The Attribute Selector for Fun and (no ad) Profit | If I had a favourite CSS selector, it would undoubtedly be the attribute selector (Ed: You really need to get out more). For those of you not familiar with the attribute selector, it allows you to style an element based on the existence, value or partial value of a specific attribute. At it’s very basic level you could use this selector to style an element with particular attribute, such as a title attribute. <abbr title="Cascading Style Sheets">CSS</abbr> In this example I’m going to make all <abbr> elements with a title attribute grey. I am also going to give them a dotted bottom border that changes to a solid border on hover. Finally, for that extra bit of feedback, I will change the cursor to a question mark on hover as well. abbr[title] { color: #666; border-bottom: 1px dotted #666; } abbr[title]:hover { border-bottom-style: solid; cursor: help; } This provides a nice way to show your site users that <abbr> elements with title tags are special, as they contain extra, hidden information. Most modern browsers such as Firefox, Safari and Opera support the attribute selector. Unfortunately Internet Explorer 6 and below does not support the attribute selector, but that shouldn’t stop you from adding nice usability embellishments to more modern browsers. Internet Explorer 7 looks set to implement this CSS2.1 selector, so expect to see it become more common over the next few years. Styling an element based on the existence of an attribute is all well and good, but it is still pretty limited. Where attribute selectors come into their own is their ability to target the value of an attribute. You can use this for a variety of interesting effects such as styling VoteLinks. VoteWhats? If you haven’t heard of VoteLinks, it is a microformat that allows people to show their approval or disapproval of a links destination by adding a pre-defined keyword to the rev attribute. For instance, if you had a particularly bad meal at a restaurant, you could signify your dissaproval by adding a rev… | 2005 | Andy Budd | andybudd | 2005-12-11T00:00:00+00:00 | https://24ways.org/2005/the-attribute-selector-for-fun-and-no-ad-profit/ | code |
| 255 | 255 | Inclusive Considerations When Restyling Form Controls | I would like to begin by saying 2018 was the year that we, as developers, visual designers, browser implementers, and inclusive design and experience specialists rallied together and achieved a long-sought goal: We now have the ability to fully style form controls, across all modern browsers, while retaining their ease of declaration, native functionality and accessibility. I would like to begin by saying all these things. However, they’re not true. I think we spent the year debating about what file extension CSS should be written in, or something. Or was that last year? Maybe I’m thinking of next year. Returning to reality, styling form controls is more tricky and time consuming these days rather than flat out “hard”. In fact, depending on the length of the styling-leash a particular browser provides, there are controls you can style quite a bit. As for browsers with shorter leashes, there are other options to force their controls closer to the visual design you’re tasked to match. However, when striving for custom styled controls, one must be careful not to forget about the inherent functionality and accessibility that many provide. People expect and deserve the products and services they use and pay for to work for them. If these services are visually pleasing, but only function for those who fit the handful of personas they’ve been designed for, then we’ve potentially deprived many people the experiences they deserve. Quick level setting Getting down to brass tacks, when creating custom styled form controls that should retain their expected semantics and functionality, we have to consider the following: Many form elements can be styled directly through standard and browser specific selectors, as well as through some clever styling of markup patterns. We should leverage these native options before reinventing any wheels. It is important to preserve the underlying semantics of interactive controls. We must not unintentionally exclude people who use assistive technologies (ATs) that rely on these semantics. Ma… | 2018 | Scott O'Hara | scottohara | 2018-12-13T00:00:00+00:00 | https://24ways.org/2018/inclusive-considerations-when-restyling-form-controls/ | code |
| 16 | 16 | URL Rewriting for the Fearful | I think it was Marilyn Monroe who said, “If you can’t handle me at my worst, please just fix these rewrite rules, I’m getting an internal server error.” Even the blonde bombshell hated configuring URL rewrites on her website, and I think most of us know where she was coming from. The majority of website projects I work on require some amount of URL rewriting, and I find it mildly enjoyable — I quite like a good rewrite rule. I suspect you may not share my glee, so in this article we’re going to go back to basics to try to make the whole rigmarole more understandable. When we think about URL rewriting, usually that means adding some rules to an .htaccess file for an Apache web server. As that’s the most common case, that’s what I’ll be sticking to here. If you work with a different server, there’s often documentation specifically for translating from Apache’s mod_rewrite rules. I even found an automatic converter for nginx. This isn’t going to be a comprehensive guide to every URL rewriting problem you might ever have. That would take us until Christmas. If you consider yourself a trial-and-error dabbler in the HTTP 500-infested waters of URL rewriting, then hopefully this will provide a little bit more of a basis to help you figure out what you’re doing. If you’ve ever found yourself staring at the white screen of death after screwing up your .htaccess file, don’t worry. As Michael Jackson once insipidly whined, you are not alone. The basics Rewrite rules form part of the Apache web server’s configuration for a website, and can be placed in a number of different locations as part of your virtual host configuration. By far the simplest and most portable option is to use an .htaccess file in your website root. Provided your server has mod_rewrite available, all you need to do to kick things off in your .htaccess file is: RewriteEngine on The general formula for a rewrite rule is: RewriteRule URL/to/match URL/to/use/if/it/matches [options] When we talk about URL rewriting, we’re normally talking about one o… | 2013 | Drew McLellan | drewmclellan | 2013-12-01T00:00:00+00:00 | https://24ways.org/2013/url-rewriting-for-the-fearful/ | code |
| 212 | 212 | Refactoring Your Way to a Design System | I love refactoring code. Absolutely love it. There’s something about taking a piece of UI or a bit of code and reworking it in a way that is simpler, modular, and reusable that makes me incredibly happy. I also love design systems work. It gives hybrids like me a home. It seems like everyone is talking about design systems right now. Design systems teams are perfect for those who enjoy doing architectural work and who straddle the line between designer and developer. Una Kravets recently identified some of the reasons that design systems fail, and chief among them are lack of buy-in, underlying architecture, and communication. While it’s definitely easier to establish these before project work begins, that doesn’t mean it is the only path to success. It’s a privilege to work on a greenfield project, and one that is not afforded to many. Companies with complex and/or legacy codebases may not be able to support a full rewrite of their product. In addition, many people feel overwhelmed at the thought of creating a complete system and are at a loss of how or where to even begin the process. This is where refactoring comes into play. According to Martin Fowler, “refactoring is the process of changing a software system in such a way that it does not alter the external behavior of the code yet improves its internal structure.” It’s largely invisible work, and if you do it right, the end user will never know the difference. What it will do is provide a decent foundation to begin more systematic work. Build a solid foundation When I was first asked to create Pantsuit, the design system for Hillary for America, I was tasked with changing our codebase to be more modular and scalable, without changing the behavior or visual design of the UI. We needed a system in place that would allow for the rapid creation of new projects while maintaining a consistent visual language. In essence, I was asked to refactor our code into a design system. During that refactor, I focused the majority of my efforts on creating a scalable arch… | 2017 | Mina Markham | minamarkham | 2017-12-23T00:00:00+00:00 | https://24ways.org/2017/refactoring-your-way-to-a-design-system/ | code |
| 240 | 240 | My CSS Wish List | I love Christmas. I love walking around the streets of London, looking at the beautifully decorated windows, seeing the shiny lights that hang above Oxford Street and listening to Christmas songs. I’m not going to lie though. Not only do I like buying presents, I love receiving them too. I remember making long lists that I would send to Father Christmas with all of the Lego sets I wanted to get. I knew I could only get one a year, but I would spend days writing the perfect list. The years have gone by, but I still enjoy making wish lists. And I’ll tell you a little secret: my mum still asks me to send her my Christmas list every year. This time I’ve made my CSS wish list. As before, I’d be happy with just one present. Before I begin… … this list includes: things that don’t exist in the CSS specification (if they do, please let me know in the comments – I may have missed them); others that are in the spec, but it’s incomplete or lacks use cases and examples (which usually means that properties haven’t been implemented by even the most recent browsers). Like with any other wish list, the further down I go, the more unrealistic my expectations – but that doesn’t mean I can’t wish. Some of the things we wouldn’t have thought possible a few years ago have been implemented and our wishes fulfilled (think multiple backgrounds, gradients and transformations, for example). The list Cross-browser implementation of font-size-adjust When one of the fall-back fonts from your font stack is used, rather than the preferred (first) one, you can retain the aspect ratio by using this very useful property. It is incredibly helpful when the fall-back fonts are smaller or larger than the initial one, which can make layouts look less polished. What font-size-adjust does is divide the original font-size of the fall-back fonts by the font-size-adjust value. This preserves the x-height of the preferred font in the fall-back fonts. Here’s a simple example: p { font-family: Calibri, "Lucida Sans", Verdana, sans-serif; … | 2010 | Inayaili de León Persson | inayailideleon | 2010-12-03T00:00:00+00:00 | https://24ways.org/2010/my-css-wish-list/ | code |
| 243 | 243 | Researching a Property in the CSS Specifications | I frequently joke that I’m “reading the specs so you don’t have to”, as I unpack some detail of a CSS spec in a post on my blog, some documentation for MDN, or an article on Smashing Magazine. However waiting for someone like me to write an article about something is a pretty slow way to get the information you need. Sometimes people like me get things wrong, or specifications change after we write a tutorial. What if you could just look it up yourself? That’s what you get when you learn to read the CSS specifications, and in this article my aim is to give you the basic details you need to grab quick information about any CSS property detailed in the CSS specs. Where are the CSS Specifications? The easiest way to see all of the CSS specs is to take a look at the Current Work page in the CSS section of the W3C Website. Here you can see all of the specifications listed, the level they are at and their status. There is also a link to the specification from this page. I explained CSS Levels in my article Why there is no CSS 4. Who are the specifications for? CSS specifications are for everyone who uses CSS. You might be a browser engineer - referred to as an implementor - needing to know how to implement a feature, or a web developer - referred to as an author - wanting to know how to use the feature. The fact that both parties are looking at the same document hopefully means that what the browser displays is what the web developer expected. Which version of a spec should I look at? There are a couple of places you might want to look. Each published spec will have the latest published version, which will have TR in the URL and can be accessed without a date (which is always the newest version) or at a date, which will be the date of that publication. If I’m referring to a particular Working Draft in an article I’ll typically link to the dated version. That way if the information changes it is possible for someone to see where I got the information from at the time of writing. If you want the very latest additions an… | 2018 | Rachel Andrew | rachelandrew | 2018-12-14T00:00:00+00:00 | https://24ways.org/2018/researching-a-property-in-the-css-specifications/ | code |
| 244 | 244 | It’s Beginning to Look a Lot Like XSSmas | I dread the office Secret Santa. I have a knack for choosing well-meaning but inappropriate presents, like a bottle of port for a teetotaller, a cheese-tasting experience for a vegan, or heaven forbid, Spurs socks for an Arsenal supporter. Ok, the last one was intentional. It’s the same with gifting code. Once, I made a pattern library for A List Apart which I open sourced, and a few weeks later, a glaring security vulnerability was found in it. My gift was so generous that it enabled unrestricted access to any file on any public-facing server that hosted it. With platforms like GitHub and npm, giving the gift of code is so easy it’s practically a no-brainer. This giant, open source yankee swap helps us do our jobs without starting from scratch with every project. But like any gift-giving, it’s also risky. Vulnerabilities and Open Source Open source code is not inherently more or less vulnerable than closed-source code. What makes it higher risk is that the same piece of code gets reused in lots of places, meaning a hacker can use the same exploit mechanism on the same vulnerable code in different apps. Graph showing the number of open source vulnerabilities published per year, from the State of Open Source Security 2017 In the first 24 ways article this year, Katie referenced a few different types of vulnerability: Cross-site Request Forgery (also known as CSRF) SQL Injection Cross-site Scripting (also known as XSS) There are many more types of vulnerability, and those that live under the same category share similarities. For example, my favourite – is it weird to have a favourite vulnerability? – is Cross Site Scripting (XSS), which allows for the injection of scripts into web pages. This is a really common vulnerability often unwittingly added by developers. OWASP (the Open Web Application Security Project) wrote a great article about how to prevent opening the door to XSS attacks – share it generously with your colleagues. Most vulnerabilities like this are not added intentionally – they’re doors left ajar… | 2018 | Anna Debenham | annadebenham | 2018-12-17T00:00:00+00:00 | https://24ways.org/2018/its-beginning-to-look-a-lot-like-xssmas/ | code |
| 332 | 332 | CSS Layout Starting Points | I build a lot of CSS layouts, some incredibly simple, others that cause sleepless nights and remind me of the torturous puzzle books that were given to me at Christmas by aunties concerned for my education. However, most of the time these layouts fit quite comfortably into one of a very few standard formats. For example: Liquid, multiple column with no footer Liquid, multiple column with footer Fixed width, centred Rather than starting out with blank CSS and (X)HTML documents every time you need to build a layout, you can fairly quickly create a bunch of layout starting points, that will give you a solid basis for creating the rest of the design and mean that you don’t have to remember how a three column layout with a footer is best achieved every time you come across one! These starting points can be really basic, in fact that’s exactly what you want as the final design, the fonts, the colours and so on will be different every time. It’s just the main sections we want to be able to quickly get into place. For example, here is a basic starting point CSS and XHTML document for a fixed width, centred layout with a footer. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Fixed Width and Centred starting point document</title> <link rel="stylesheet" type="text/css" href="fixed-width-centred.css" /> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> </head> <body> <div id="wrapper"> <div id="side"> <div class="inner"> <p>Sidebar content here</p> </div> </div> <div id="content"> <div class="inner"> <p>Your main content goes here.</p> </div> </div> <div id="footer"> <div class="inner"> <p>Ho Ho Ho!</p> </div> </div> </div> </body> </html> body { text-align: center; min-width: 740px; padding: 0; margi… | 2005 | Rachel Andrew | rachelandrew | 2005-12-04T00:00:00+00:00 | https://24ways.org/2005/css-layout-starting-points/ | code |
| 238 | 238 | Everything You Wanted To Know About Gradients (And a Few Things You Didn’t) | Hello. I am here to discuss CSS3 gradients. Because, let’s face it, what the web really needed was more gradients. Still, despite their widespread use (or is it overuse?), the smartly applied gradient can be a valuable contributor to a designer’s vocabulary. There’s always been a tension between the inherently two-dimensional nature of our medium, and our desire for more intensity, more depth in our designs. And a gradient can evoke so much: the splay of light across your desk, the slow decrease in volume toward the end of your favorite song, the sunset after a long day. When properly applied, graded colors bring a much needed softness to our work. Of course, that whole ‘proper application’ thing is the tricky bit. But given their place in our toolkit and their prominence online, it really is heartening to see we can create gradients directly with CSS. They’re part of the draft images module, and implemented in two of the major rendering engines. Still, I’ve always found CSS gradients to be one of the more confusing aspects of CSS3. So if you’ll indulge me, let’s take a quick look at how to create CSS gradients—hopefully we can make them seem a bit more accessible, and bring a bit more art into the browser. Gradient theory 101 (I hope that’s not really a thing) Right. So before we dive into the code, let’s cover a few basics. Every gradient, no matter how complex, shares a few common characteristics. Here’s a straightforward one: I spent seconds hours designing this gradient. I hope you like it. At either end of our image, we have a final color value, or color stop: on the left, our stop is white; on the right, black. And more color-rich gradients are no different: (Don’t ever really do this. Please. I beg you.) It’s visually more intricate, sure. But at the heart of it, we have just seven color stops (red, orange, yellow, and so on), making for a fantastic gradient all the way. Now, color stops alone do not a gradient make. Between each is a transition point, the fail-over point between the two stop… | 2010 | Ethan Marcotte | ethanmarcotte | 2010-12-22T00:00:00+00:00 | https://24ways.org/2010/everything-you-wanted-to-know-about-gradients/ | code |
| 233 | 233 | Wrapping Things Nicely with HTML5 Local Storage | HTML5 is here to turn the web from a web of hacks into a web of applications – and we are well on the way to this goal. The coming year will be totally and utterly awesome if you are excited about web technologies. This year the HTML5 revolution started and there is no stopping it. For the first time all the browser vendors are rallying together to make a technology work. The new browser war is fought over implementation of the HTML5 standard and not over random additions. We live in exciting times. Starting with a bang As with every revolution there is a lot of noise with bangs and explosions, and that’s the stage we’re at right now. HTML5 showcases are often CSS3 showcases, web font playgrounds, or video and canvas examples. This is great, as it gets people excited and it gives the media something to show. There is much more to HTML5, though. Let’s take a look at one of the less sexy, but amazingly useful features of HTML5 (it was in the HTML5 specs, but grew at such an alarming rate that it warranted its own spec): storing information on the client-side. Why store data on the client-side? Storing information in people’s browsers affords us a few options that every application should have: You can retain the state of an application – when the user comes back after closing the browser, everything will be as she left it. That’s how ‘real’ applications work and this is how the web ones should, too. You can cache data – if something doesn’t change then there is no point in loading it over the Internet if local access is so much faster You can store user preferences – without needing to keep that data on your server at all. In the past, storing local data wasn’t much fun. The pain of hacky browser solutions In the past, all we had were cookies. I don’t mean the yummy things you get with your coffee, endorsed by the blue, furry junkie in Sesame Street, but the other, digital ones. Cookies suck – it isn’t fun to have an unencrypted HTTP overhead on every server request for storing four kilobytes of data… | 2010 | Christian Heilmann | chrisheilmann | 2010-12-06T00:00:00+00:00 | https://24ways.org/2010/html5-local-storage/ | code |
| 182 | 182 | Breaking Out The Edges of The Browser | HTML5 contains more than just the new entities for a more meaningful document, it also contains an arsenal of JavaScript APIs. So many in fact, that some APIs have outgrown the HTML5 spec’s backyard and have been sent away to grow up all on their own and been given the prestigious honour of being specs in their own right. So when I refer to (bendy finger quote) “HTML5”, I mean the HTML5 specification and a handful of other specifications that help us authors build web applications. Examples of those specs I would include in the umbrella term would be: geolocation, web storage, web databases, web sockets and web workers, to name a few. For all you guys and gals, on this special 2009 series of 24 ways, I’m just going to focus on data storage and offline applications: boldly taking your browser where no browser has gone before! Web Storage The Web Storage API is basically cookies on steroids, a unhealthy dosage of steroids. Cookies are always a pain to work with. First of all you have the problem of setting, changing and deleting them. Typically solved by Googling and blindly relying on PPK’s solution. If that wasn’t enough, there’s the 4Kb limit that some of you have hit when you really don’t want to. The Web Storage API gets around all of the hoops you have to jump through with cookies. Storage supports around 5Mb of data per domain (the spec’s recommendation, but it’s open to the browsers to implement anything they like) and splits in to two types of storage objects: sessionStorage – available to all pages on that domain while the window remains open localStorage – available on the domain until manually removed Support Ignoring beta browsers for our support list, below is a list of the major browsers and their support for the Web Storage API: Latest: Internet Explorer, Firefox, Safari (desktop & mobile/iPhone) Partial: Google Chrome (only supports localStorage) Not supported: Opera (as of 10.10) Usage Both sessionStorage and localStorage support the same interface for accessing their co… | 2009 | Remy Sharp | remysharp | 2009-12-02T00:00:00+00:00 | https://24ways.org/2009/breaking-out-the-edges-of-the-browser/ | code |
| 169 | 169 | Incite A Riot | Given its relatively limited scope, HTML can be remarkably expressive. With a bit of lateral thinking, we can mark up content such as tag clouds and progress meters, even when we don’t have explicit HTML elements for those patterns. Suppose we want to mark up a short conversation: Alice: I think Eve is watching. Bob: This isn’t a cryptography tutorial …we’re in the wrong example! A note in the the HTML 4.01 spec says it’s okay to use a definition list: Another application of DL, for example, is for marking up dialogues, with each DT naming a speaker, and each DD containing his or her words. That would give us: <dl> <dt>Alice</dt>: <dd>I think Eve is watching.</dd> <dt>Bob</dt>: <dd>This isn't a cryptography tutorial ...we're in the wrong example!</dd> </dl> This usage of a definition list is proof that writing W3C specifications and smoking crack are not mutually exclusive activities. “I think Eve is watching” is not a definition of “Alice.” If you (ab)use a definition list in this way, Norm will hunt you down. The conversation problem was revisited in HTML5. What if dt and dd didn’t always mean “definition title” and “definition description”? A new element was forged: dialog. Now the the “d” in dt and dd doesn’t stand for “definition”, it stands for “dialog” (or “dialogue” if you can spell): <dialog> <dt>Alice</dt>: <dd>I think Eve is watching.</dd> <dt>Bob</dt>: <dd>This isn't a cryptography tutorial ...we're in the wrong example!</dd> </dialog> Problem solved …except that dialog is no longer in the HTML5 spec. Hixie further expanded the meaning of dt and dd so that they could be used inside details (which makes sense—it starts with a “d”) and figure (…um). At the same time as the content model of details and figure were being updated, the completely-unrelated dialog element was dropped. Back to the drawing board, or in this case, the HTML 4.01 specification. The spec defines the cite element thusly: Contains a citation or a reference to other sources. Perfect! There’s even an … | 2009 | Jeremy Keith | jeremykeith | 2009-12-11T00:00:00+00:00 | https://24ways.org/2009/incite-a-riot/ | code |
| 322 | 322 | Introduction to Scriptaculous Effects | Gather around kids, because this year, much like in that James Bond movie with Denise Richards, Christmas is coming early… in the shape of scrumptuous smooth javascript driven effects at your every whim. Now what I’m going to do, is take things down a notch. Which is to say, you don’t need to know much beyond how to open a text file and edit it to follow this article. Personally, I for instance can’t code to save my life. Well, strictly speaking, that’s not entirely true. If my life was on the line, and the code needed was really simple and I wasn’t under any time constraints, then yeah maybe I could hack my way out of it But my point is this: I’m not a programmer in the traditional sense of the word. In fact, what I do best, is scrounge code off of other people, take it apart and then put it back together with duct tape, chewing gum and dumb blind luck. No, don’t run! That happens to be a good thing in this case. You see, we’re going to be implementing some really snazzy effects (which are considerably more relevant than most people are willing to admit) on your site, and we’re going to do it with the aid of Thomas Fuchs’ amazing Script.aculo.us library. And it will be like stealing candy from a child. What Are We Doing? I’m going to show you the very basics of implementing the Script.aculo.us javascript library’s Combination Effects. These allow you to fade elements on your site in or out, slide them up and down and so on. Why Use Effects at All? Before get started though, let me just take a moment to explain how I came to see smooth transitions as something more than smoke and mirror-like effects included for with little more motive than to dazzle and make parents go ‘uuh, snazzy’. Earlier this year, I had the good fortune of meeting the kind, gentle and quite knowledgable Matt Webb at a conference here in Copenhagen where we were both speaking (though I will be the first to admit my little talk on Open Source Design was vastly inferior to Matt’s talk). Matt held a talk called Fixing Broken Windows (b… | 2005 | Michael Heilemann | michaelheilemann | 2005-12-12T00:00:00+00:00 | https://24ways.org/2005/introduction-to-scriptaculous-effects/ | code |
| 276 | 276 | Your jQuery: Now With 67% Less Suck | Fun fact: more websites are now using jQuery than Flash. jQuery is an amazing tool that’s made JavaScript accessible to developers and designers of all levels of experience. However, as Spiderman taught us, “with great power comes great responsibility.” The unfortunate downside to jQuery is that while it makes it easy to write JavaScript, it makes it easy to write really really f*&#ing bad JavaScript. Scripts that slow down page load, unresponsive user interfaces, and spaghetti code knotted so deep that it should come with a bottle of whiskey for the next sucker developer that has to work on it. This becomes more important for those of us who have yet to move into the magical fairy wonderland where none of our clients or users view our pages in Internet Explorer. The IE JavaScript engine moves at the speed of an advancing glacier compared to more modern browsers, so optimizing our code for performance takes on an even higher level of urgency. Thankfully, there are a few very simple things anyone can add into their jQuery workflow that can clear up a lot of basic problems. When undertaking code reviews, three of the areas where I consistently see the biggest problems are: inefficient selectors; poor event delegation; and clunky DOM manipulation. We’ll tackle all three of these and hopefully you’ll walk away with some new jQuery batarangs to toss around in your next project. Selector optimization Selector speed: fast or slow? Saying that the power behind jQuery comes from its ability to select DOM elements and act on them is like saying that Photoshop is a really good tool for selecting pixels on screen and making them change color – it’s a bit of a gross oversimplification, but the fact remains that jQuery gives us a ton of ways to choose which element or elements in a page we want to work with. However, a surprising number of web developers are unaware that all selectors are not created equal; in fact, it’s incredible just how drastic the performance difference can be between two selectors that, at first g… | 2011 | Scott Kosman | scottkosman | 2011-12-13T00:00:00+00:00 | https://24ways.org/2011/your-jquery-now-with-less-suck/ | code |
| 18 | 18 | Grunt for People Who Think Things Like Grunt are Weird and Hard | Front-end developers are often told to do certain things: Work in as small chunks of CSS and JavaScript as makes sense to you, then concatenate them together for the production website. Compress your CSS and minify your JavaScript to make their file sizes as small as possible for your production website. Optimize your images to reduce their file size without affecting quality. Use Sass for CSS authoring because of all the useful abstraction it allows. That’s not a comprehensive list of course, but those are the kind of things we need to do. You might call them tasks. I bet you’ve heard of Grunt. Well, Grunt is a task runner. Grunt can do all of those things for you. Once you’ve got it set up, which isn’t particularly difficult, those things can happen automatically without you having to think about them again. But let’s face it: Grunt is one of those fancy newfangled things that all the cool kids seem to be using but at first glance feels strange and intimidating. I hear you. This article is for you. Let’s nip some misconceptions in the bud right away Perhaps you’ve heard of Grunt, but haven’t done anything with it. I’m sure that applies to many of you. Maybe one of the following hang-ups applies to you. I don’t need the things Grunt does You probably do, actually. Check out that list up top. Those things aren’t nice-to-haves. They are pretty vital parts of website development these days. If you already do all of them, that’s awesome. Perhaps you use a variety of different tools to accomplish them. Grunt can help bring them under one roof, so to speak. If you don’t already do all of them, you probably should and Grunt can help. Then, once you are doing those, you can keep using Grunt to do more for you, which will basically make you better at doing your job. Grunt runs on Node.js — I don’t know Node You don’t have to know Node. Just like you don’t have to know Ruby to use Sass. Or PHP to use WordPress. Or C++ to use Microsoft Word. I have other ways to do the things Grunt could do for me Are the… | 2013 | Chris Coyier | chriscoyier | 2013-12-11T00:00:00+00:00 | https://24ways.org/2013/grunt-is-not-weird-and-hard/ | code |
| 191 | 191 | CSS Animations | Friend: You should learn how to write CSS! Me: … Friend: CSS; Cascading Style Sheets. If you’re serious about web design, that’s the next thing you should learn. Me: What’s wrong with <font> tags? That was 8 years ago. Thanks to the hard work of Jeffrey, Andy, Andy, Cameron, Colly, Dan and many others, learning how to decently markup a website and write lightweight stylesheets was surprisingly easy. They made it so easy even a complete idiot (OH HAI) was able to quickly master it. And then… nothing. For a long time, it seemed like there wasn’t happening anything in the land of CSS, time stood still. Once you knew the basics, there wasn’t anything new to keep up with. It looked like a great band split, but people just kept re-releasing their music in various “Best Of!” or “Remastered!” albums. Fast forward a couple of years to late 2006. On the official WebKit blog Surfin’ Safari, there’s an article about something called CSS animations. Great new stuff to play with, but only supported by nightly builds (read: very, very beta) of WebKit. In the following months, they release other goodies, like CSS gradients, CSS reflections, CSS masks, and even more CSS animation sexiness. Whoa, looks like the band got back together, found their second youth, and went into overdrive! The problem was that if you wanted to listen to their new albums, you had to own some kind of new high-tech player no one on earth (besides some early adopters) owned. Back in the time machine. It is now late 2009, close to Christmas. Things have changed. Browsers supporting these new toys are widely available left and right. Even non-techies are using these advanced browsers to surf the web on a daily basis! Epic win? Almost, but at least this gives us enough reason to start learning how we could use all this new CSS voodoo. On Monday, Natalie Downe showed you a good tutorial on Going Nuts with CSS Transitions. Today, I’m taking it one step further… Howto: A basic spinner No matter how fast internet tubes or servers are, we’ll always need spi… | 2009 | Tim Van Damme | timvandamme | 2009-12-15T00:00:00+00:00 | https://24ways.org/2009/css-animations/ | code |
| 179 | 179 | Have a Field Day with HTML5 Forms | Forms are usually seen as that obnoxious thing we have to markup and style. I respectfully disagree: forms (on a par with tables) are the most exciting thing we have to work with. Here we’re going to take a look at how to style a beautiful HTML5 form using some advanced CSS and latest CSS3 techniques. I promise you will want to style your own forms after you’ve read this article. Here’s what we’ll be creating: The form. (Icons from Chalkwork Payments) Meaningful markup We’re going to style a simple payment form. There are three main sections on this form: The person’s details The address details The credit card details We are also going to use some of HTML5’s new input types and attributes to create more meaningful fields and use less unnecessary classes and ids: email, for the email field tel, for the telephone field number, for the credit card number and security code required, for required fields placeholder, for the hints within some of the fields autofocus, to put focus on the first input field when the page loads There are a million more new input types and form attributes on HTML5, and you should definitely take a look at what’s new on the W3C website. Hopefully this will give you a good idea of how much more fun form markup can be. A good foundation Each section of the form will be contained within its own fieldset. In the case of the radio buttons for choosing the card type, we will enclose those options in another nested fieldset. We will also be using an ordered list to group each label / input pair. This will provide us with a (kind of) semantic styling hook and it will also make the form easier to read when viewing with no CSS applied: The unstyled form So here’s the markup we are going to be working with: <form id=payment> <fieldset> <legend>Your details</legend> <ol> <li> <label for=name>Name</label> <input id=name name=name type=text placeholder="First and last name" required autofocus> </li> <li> <label for=email>Email</label> <input id=… | 2009 | Inayaili de León Persson | inayailideleon | 2009-12-03T00:00:00+00:00 | https://24ways.org/2009/have-a-field-day-with-html5-forms/ | code |
| 188 | 188 | Don't Lose Your :focus | For many web designers, accessibility conjures up images of blind users with screenreaders, and the difficulties in making sites accessible to this particular audience. Of course, accessibility covers a wide range of situations that go beyond the extreme example of screenreader users. And while it’s true that making a complex site accessible can often be a daunting prospect, there are also many small things that don’t take anything more than a bit of judicious planning, are very easy to test (without having to buy expensive assistive technology), and can make all the difference to certain user groups. In this short article we’ll focus on keyboard accessibility and how careless use of CSS can potentially make your sites completely unusable. Keyboard Access Users who for whatever reason can’t use a mouse will employ a keyboard (or keyboard-like custom interface) to navigate around web pages. By default, they will use TAB and SHIFT + TAB to move from one focusable element (links, form controls and area) of a page to the next. Note: in OS X, you’ll first need to turn on full keyboard access under System Preferences > Keyboard and Mouse > Keyboard Shortcuts. Safari under Windows needs to have the option Press Tab to highlight each item on a webpage in Preferences > Advanced enabled. Opera is the odd one out, as it has a variety of keyboard navigation options – the most relevant here being spatial navigation via Shift+Down, Shift+Up, Shift+Left, and Shift+Right). But I Don’t Like Your Dotted Lines… To show users where they are within a page, browsers place an outline around the element that currently has focus. The “problem” with these default outlines is that some browsers (Internet Explorer and Firefox) also display them when a user clicks on a focusable element with the mouse. Particularly on sites that make extensive use of image replacement on links with “off left” techniques this can create very unsightly outlines that stretch from the replaced element all the way to the left edge of the browser. Outline … | 2009 | Patrick Lauke | patricklauke | 2009-12-09T00:00:00+00:00 | https://24ways.org/2009/dont-lose-your-focus/ | code |
| 204 | 204 | Cascading Web Design with Feature Queries | Feature queries, also known as the @supports rule, were introduced as an extension to the CSS2 as part of the CSS Conditional Rules Module Level 3, which was first published as a working draft in 2011. It is a conditional group rule that tests if the browser’s user agent supports CSS property:value pairs, and arbitrary conjunctions (and), disjunctions (or), and negations (not) of them. The motivation behind this feature was to allow authors to write styles using new features when they were supported but degrade gracefully in browsers where they are not. Even though the nature of CSS already allows for graceful degradation, for example, by ignoring unsupported properties or values without disrupting other styles in the stylesheet, sometimes we need a bit more than that. CSS is ultimately a holistic technology, in that, even though you can use properties in isolation, the full power of CSS shines through when used in combination. This is especially evident when it comes to building web layouts. Having native feature detection in CSS makes it much more convenient to build with cutting-edge CSS for the latest browsers while supporting older browsers at the same time. Browser support Opera first implemented feature queries in November 2012, both Chrome and Firefox had it since May 2013. There have been several articles about feature queries written over the years, however, it seems that awareness of its broad support isn’t that well-known. Much of the earlier coverage on feature queries was not written in English, and perhaps that was a limiting factor. @supports ― CSSのFeature Queries by Masataka Yakura, August 8 2012 Native CSS Feature Detection via the @supports Rule by Chris Mills, December 21 2012 CSS @supports by David Walsh, April 3 2013 Responsive typography with CSS Feature Queries by Aral Balkan, April 9 2013 How to use the @supports rule in your CSS by Lea Verou, January 31 2014 CSS Feature Queries by Amit Tal, June 2 2014 Coming Soon: CSS Feature Queries by Adobe Web Platform Team, August 21 2014 CSS featu… | 2017 | Chen Hui Jing | chenhuijing | 2017-12-01T00:00:00+00:00 | https://24ways.org/2017/cascading-web-design/ | code |
| 143 | 143 | Marking Up a Tag Cloud | Everyone’s doing it. The problem is, everyone’s doing it wrong. Harsh words, you might think. But the crimes against decent markup are legion in this area. You see, I’m something of a markup and semantics junkie. So I’m going to analyse some of the more well-known tag clouds on the internet, explain what’s wrong, and then show you one way to do it better. del.icio.us I think the first ever tag cloud I saw was on del.icio.us. Here’s how they mark it up. <div class="alphacloud"> <a href="/tag/.net" class="lb s2">.net</a> <a href="/tag/advertising" class=" s3">advertising</a> <a href="/tag/ajax" class=" s5">ajax</a> ... </div> Unfortunately, that is one of the worst examples of tag cloud markup I have ever seen. The page states that a tag cloud is a list of tags where size reflects popularity. However, despite describing it in this way to the human readers, the page’s author hasn’t described it that way in the markup. It isn’t a list of tags, just a bunch of anchors in a <div>. This is also inaccessible because a screenreader will not pause between adjacent links, and in some configurations will not announce the individual links, but rather all of the tags will be read as just one link containing a whole bunch of words. Markup crime number one. Flickr Ah, Flickr. The darling photo sharing site of the internet, and the biggest blind spot in every standardista’s vision. Forgive it for having atrocious markup and sometimes confusing UI because it’s just so much damn fun to use. Let’s see what they do. <p id="TagCloud"> <a href="/photos/tags/06/" style="font-size: 14px;">06</a> <a href="/photos/tags/africa/" style="font-size: 12px;">africa</a> <a href="/photos/tags/amsterdam/" style="font-size: 14px;">amsterdam</a> ... </p> Again we have a simple collection of anchors like del.icio.us, only this time in a paragraph. But rather than using a class to represent the size of the tag they use an inline style. An inline style using a pixel-based font size. That’s so far away from the goal of sep… | 2006 | Mark Norman Francis | marknormanfrancis | 2006-12-09T00:00:00+00:00 | https://24ways.org/2006/marking-up-a-tag-cloud/ | code |
| 145 | 145 | The Neverending (Background Image) Story | Everyone likes candy for Christmas, and there’s none better than eye candy. Well, that, and just more of the stuff. Today we’re going to combine both of those good points and look at how to create a beautiful background image that goes on and on… forever! Of course, each background image is different, so instead of agonising over each and every pixel, I’m going to concentrate on five key steps that you can apply to any of your own repeating background images. In this example, we’ll look at the Miami Beach background image used on the new FOWA site, which I’m afraid is about as un-festive as you can get. 1. Choose your image wisely I find there are three main criteria when judging photos you’re considering for repetition manipulation (or ‘repetulation’, as I like to say)… simplicity (beware of complex patterns) angle and perspective (watch out for shadows and obvious vanishing points) consistent elements (for easy cloning) You might want to check out this annotated version of the image, where I’ve highlighted elements of the photo that led me to choose it as the right one. The original image purchased from iStockPhoto. The Photoshopped version used on the FOWA site. 2. The power of horizontal lines With the image chosen and your cursor poised for some Photoshop magic, the most useful thing you can do is drag out the edge pixels from one side of the image to create a kind of rough colour ‘template’ on which to work over. It doesn’t matter which side you choose, although you might find it beneficial to use the one with the simplest spread of colour and complex elements. Click and hold on the marquee tool in the toolbar and select the ‘single column marquee tool’, which will span the full height of your document but will only be one pixel wide. Make the selection right at the edge of your document, press ctrl-c / cmd-c to copy the selection you made, create a new layer, and hit ctrl-v / cmd-v to paste the selection onto your new layer. using free transform (ctrl-t / cmd-t), drag out your selection so t… | 2007 | Elliot Jay Stocks | elliotjaystocks | 2007-12-03T00:00:00+00:00 | https://24ways.org/2007/the-neverending-background-image-story/ | code |
| 249 | 249 | Fast Autocomplete Search for Your Website | Every website deserves a great search engine - but building a search engine can be a lot of work, and hosting it can quickly get expensive. I’m going to build a search engine for 24 ways that’s fast enough to support autocomplete (a.k.a. typeahead) search queries and can be hosted for free. I’ll be using wget, Python, SQLite, Jupyter, sqlite-utils and my open source Datasette tool to build the API backend, and a few dozen lines of modern vanilla JavaScript to build the interface. Try it out here, then read on to see how I built it. First step: crawling the data The first step in building a search engine is to grab a copy of the data that you plan to make searchable. There are plenty of potential ways to do this: you might be able to pull it directly from a database, or extract it using an API. If you don’t have access to the raw data, you can imitate Google and write a crawler to extract the data that you need. I’m going to do exactly that against 24 ways: I’ll build a simple crawler using wget, a command-line tool that features a powerful “recursive” mode that’s ideal for scraping websites. We’ll start at the https://24ways.org/archives/ page, which links to an archived index for every year that 24 ways has been running. Then we’ll tell wget to recursively crawl the website, using the --recursive flag. We don’t want to fetch every single page on the site - we’re only interested in the actual articles. Luckily, 24 ways has nicely designed URLs, so we can tell wget that we only care about pages that start with one of the years it has been running, using the -I argument like this: -I /2005,/2006,/2007,/2008,/2009,/2010,/2011,/2012,/2013,/2014,/2015,/2016,/2017 We want to be polite, so let’s wait for 2 seconds between each request rather than hammering the site as fast as we can: --wait 2 The first time I ran this, I accidentally downloaded the comments pages as well. We don’t want those, so let’s exclude them from the crawl using -X "/*/*/comments". Finally, it’s useful to be able to run the command multiple times… | 2018 | Simon Willison | simonwillison | 2018-12-19T00:00:00+00:00 | https://24ways.org/2018/fast-autocomplete-search-for-your-website/ | code |
| 313 | 313 | Centered Tabs with CSS | Doug Bowman’s Sliding Doors is pretty much the de facto way to build tabbed navigation with CSS, and rightfully so – it is, as they say, rockin’ like Dokken. But since it relies heavily on floats for the positioning of its tabs, we’re constrained to either left- or right-hand navigation. But what if we need a bit more flexibility? What if we need to place our navigation in the center? Styling the li as a floated block does give us a great deal of control over margin, padding, and other presentational styles. However, we should learn to love the inline box – with it, we can create a flexible, centered alternative to floated navigation lists. Humble Beginnings Do an extra shot of ‘nog, because you know what’s coming next. That’s right, a simple unordered list: <div id="navigation"> <ul> <li><a href="#"><span>Home</span></a></li> <li><a href="#"><span>About</span></a></li> <li><a href="#"><span>Our Work</span></a></li> <li><a href="#"><span>Products</span></a></li> <li class="last"><a href="#"><span>Contact Us</span></a></li> </ul> </div> If we were wedded to using floats to style our list, we could easily fix the width of our ul, and trick it out with some margin: 0 auto; love to center it accordingly. But this wouldn’t net us much flexibility: if we ever changed the number of navigation items, or if the user increased her browser’s font size, our design could easily break. Instead of worrying about floats, let’s take the most basic approach possible: let’s turn our list items into inline elements, and simply use text-align to center them within the ul: #navigation ul, #navigation ul li { list-style: none; margin: 0; padding: 0; } #navigation ul { text-align: center; } #navigation ul li { display: inline; margin-right: .75em; } #navigation ul li.last { margin-right: 0; } Our first step is sexy, no? Well, okay, not really – but it gives us a good starting point. We’ve tamed our list by removing its default style… | 2005 | Ethan Marcotte | ethanmarcotte | 2005-12-08T00:00:00+00:00 | https://24ways.org/2005/centered-tabs-with-css/ | code |
| 206 | 206 | Getting Hardboiled with CSS Custom Properties | Custom Properties are a fabulous new feature of CSS and have widespread support in contemporary browsers. But how do we handle browsers without support for CSS Custom Properties? Do we wait until those browsers are lying dead in a ditch before we use them? Do we tool up and prop up our CSS using a post-processor? Or do we get tough? Do we get hardboiled? Previously only pre-processing tools like LESS and Sass enabled developers to use variables in their stylesheets, but now Custom Properties have brought variables natively to CSS. How do you write a custom property? It’s hardly a mystery. Simply add two dashes to the start of a style rule. Like this: --color-text-default : black; If you’re more the underscore type, try this: --color_text_default : black; Hyphens or underscores are allowed in property names, but don’t be a chump and try to use spaces. Custom property names are also case-sensitive, so --color-text-default and --Color_Text_Default are two distinct properties. To use a custom property in your style rules, var() tells a browser to retrieve the value of a property. In the next example, the browser retrieves the black colour from the color-text-default variable and applies it to the body element: body { color : var(--color-text-default); } Like variables in LESS or Sass, CSS Custom Properties mean you don’t have to be a dumb mug and repeat colour, font, or size values multiple times in your stylesheets. Unlike a preprocessor variable though, CSS Custom Properties use the cascade, can be modified by media queries and other state changes, and can also be manipulated by Javascript. (Serg Hospodarets wrote a fabulous primer on CSS Custom Properties where he dives deeper into the code and possible applications.) Browser support Now it’s about this time that people normally mention browser support. So what about support for CSS Custom Properties? Current versions of Chrome, Edge, Firefox, Opera, and Safari are all good. Internet Explorer 11 and before? Opera Mini? Nasty. Sound familiar? Can I Use css… | 2017 | Andy Clarke | andyclarke | 2017-12-13T00:00:00+00:00 | https://24ways.org/2017/getting-hardboiled-with-css-custom-properties/ | code |
| 75 | 75 | A Harder-Working Class | Class is only becoming more important. Focusing on its original definition as an attribute for grouping (or classifying) as well as linking HTML to CSS, recent front-end development practices are emphasizing class as a vessel for structured, modularized style packages. These patterns reduce the need for repetitive declarations that can seriously bloat file sizes, and instil human-readable understanding of how the interface, layout, and aesthetics are constructed. In the next handful of paragraphs, we will look at how these emerging practices – such as object-oriented CSS and SMACSS – are pushing the relevance of class. We will also explore how HTML and CSS architecture can be further simplified, performance can be boosted, and CSS utility sharpened by combining class with the attribute selector. A primer on attribute selectors While attribute selectors were introduced in the CSS 2 spec, they are still considered rather exotic. These well-established and well-supported features give us vastly improved flexibility in targeting elements in CSS, and offer us opportunities for smarter markup. With an attribute selector, you can directly style an element based on any of its unique – or uniquely shared – attributes, without the need for an ID or extra classes. Unlike pseudo-classes, pseudo-elements, and other exciting features of CSS3, attribute selectors do not require any browser-specific syntax or prefix, and are even supported in Internet Explorer 7. For example, say we want to target all anchor tags on a page that link to our homepage. Where otherwise we might need to manually identify and add classes to the HTML for these specific links, we could simply write: [href=index.html] { } This selector reads: target every element that has an href attribute of “index.html”. Attribute selectors are more faceted, though, as they also give us some very simple regular expression-like logic that helps further narrow (or widen) a selector’s scope. In our previous example, what if we wanted to also give indicative styl… | 2012 | Nathan Ford | nathanford | 2012-12-15T00:00:00+00:00 | https://24ways.org/2012/a-harder-working-class/ | code |
| 98 | 98 | Absolute Columns | CSS layouts have come quite a long way since the dark ages of web publishing, with all sorts of creative applications of floats, negative margins, and even background images employed in order to give us that most basic building block, the column. As the title implies, we are indeed going to be discussing columns today—more to the point, a handy little application of absolute positioning that may be exactly what you’ve been looking for… Care for a nightcap? If you’ve been developing for the web for long enough, you may be familiar with this little children’s fable, passed down from wizened Shaolin monks sitting atop the great Mt. Geocities: “Once upon a time, multiple columns of the same height could be easily created using TABLES.” Now, though we’re all comfortably seated on the standards train (and let’s be honest: even if you like to think you’ve fallen off, if you’ve given up using tables for layout, rest assured your sleeper car is still reserved), this particular—and as page layout goes, quite basic—trick is still a thorn in our CSSides compared to the ease of achieving the same effect using said Tables of Evil™. See, the orange juice masks the flavor… Creative solutions such as Dan Cederholm’s Faux Columns do a good job of making it appear as though adjacent columns maintain equal height as content expands, using a background image to fill the space that the columns cannot. Now, the Holy Grail of CSS columns behaving exactly how they would as table cells—or more to the point, as columns—still eludes us (cough CSS3 Multi-column layout module cough), but sometimes you just need, for example, a secondary column (say, a sidebar) to match the height of a primary column, without involving the creation of images. This is where a little absolute positioning can save you time, while possibly giving your layout a little more flexibility. Shaken, not stirred You’re probably familiar by now with the concept of Making the Absolute, Relative as set forth long ago by Doug Bowman, but let’s quickly review just in c… | 2008 | Dan Rubin | danrubin | 2008-12-22T00:00:00+00:00 | https://24ways.org/2008/absolute-columns/ | code |
| 76 | 76 | Giving CSS Animations and Transitions Their Place | CSS animations and transitions may not sit squarely in the realm of the behaviour layer, but they’re stepping up into this area that used to be pure JavaScript territory. Heck, CSS might even perform better than its JavaScript equivalents in some cases. That’s pretty serious! With CSS’s new tricks blurring the lines between presentation and behaviour, it can start to feel bloated and messy in our CSS files. It’s an uncomfortable feeling. Here are a pair of methods I’ve found to be pretty helpful in keeping the potential bloat and wire-crossing under control when CSS has its hands in both presentation and behaviour. Same eggs, more baskets Structuring your CSS to have separate files for layout, typography, grids, and so on is a fairly common approach these days. But which one do you put your transitions and animations in? The initial answer, as always, is “it depends”. Small effects here and there will likely sit just fine with your other styles. When you move into more involved effects that require multiple animations and some logic support from JavaScript, it’s probably time to choose none of the above, and create a separate CSS file just for them. Putting all your animations in one file is a huge help for code organization. Even if you opt for a name less literal than animations.css, you’ll know exactly where to go for anything CSS animation related. That saves time and effort when it comes to editing and maintenance. Keeping track of which animations are still currently used is easier when they’re all grouped together as well. And as an added bonus, you won’t have to look at all those horribly unattractive and repetitive prefixed @-keyframe rules unless you actually need to. An animations.css file might look something like the snippet below. It defines each animation’s keyframes and defines a class for each variation of that animation you’ll be using. Depending on the situation, you may also want to include transitions here in a similar way. (I’ve found defining transitions as their own class, or mixin, … | 2012 | Val Head | valhead | 2012-12-08T00:00:00+00:00 | https://24ways.org/2012/giving-css-animations-and-transitions-their-place/ | code |
| 253 | 253 | Clip Paths Know No Bounds | CSS Shapes are getting a lot of attention as browser support has increased for properties like shape-outside and clip-path. There are a few ways that we can use CSS Shapes, in particular with the clip-path property, that are not necessarily evident at first glance. The basics of a clip path Before we dig into specific techniques to expand on clip paths, we should first take a look at a basic shape and clip-path. Clip paths can apply a CSS Shape such as a circle(), ellipse(), inset(), or the flexible polygon() to any element. Everywhere in the element that is not within the bounds of our shape will be visually removed. Using the polygon shape function, for example, we can create triangles, stars, or other straight-edged shapes as on Bennett Feely’s Clippy. While fixed units like pixels can be used when defining vertices/points (where the sides meet), percentages will give more flexibility to adapt to the element’s dimensions. See the Pen Clip Path Box by Dan Wilson (@danwilson) on CodePen. So for an octagon, we can set eight x, y pairs of percentages to define those points. In this case we start 30% into the width of the box for the first x and at the top of the box for the y and go clockwise. The visible area becomes the interior of the shape made by connecting these points with straight lines. clip-path: polygon( 30% 0%, 70% 0%, 100% 30%, 100% 70%, 70% 100%, 30% 100%, 0% 70%, 0% 30% ); A shape with less vertices than the eye can see It’s reasonable to look at the polygon() function and assume that we need to have one pair of x, y coordinates for every point in our shape. However, we gain some flexibility by thinking outside the box — or more specifically when we think outside the range of 0% - 100%. Our element’s box model will be the ultimate boundary for a clip-path, but we can still define points that exist beyond that natural box for an element. See the Pen CSS Shapes Know No Bounds by Dan Wilson (@danwilson) on CodePen. By going beyond the 0% - 100% range we can turn a polygon with three p… | 2018 | Dan Wilson | danwilson | 2018-12-20T00:00:00+00:00 | https://24ways.org/2018/clip-paths-know-no-bounds/ | code |
| 95 | 95 | Giving Content Priority with CSS3 Grid Layout | Browser support for many of the modules that are part of CSS3 have enabled us to use CSS for many of the things we used to have to use images for. The rise of mobile browsers and the concept of responsive web design has given us a whole new way of looking at design for the web. However, when it comes to layout, we haven’t moved very far at all. We have talked for years about separating our content and source order from the presentation of that content, yet most of us have had to make decisions on source order in order to get a certain visual layout. Owing to some interesting specifications making their way through the W3C process at the moment, though, there is hope of change on the horizon. In this article I’m going to look at one CSS module, the CSS3 grid layout module, that enables us to define a grid and place elements on to it. This article comprises a practical demonstration of the basics of grid layout, and also a discussion of one way in which we can start thinking of content in a more adaptive way. Before we get started, it is important to note that, at the time of writing, these examples work only in Internet Explorer 10. CSS3 grid layout is a module created by Microsoft, and implemented using the -ms prefix in IE10. My examples will all use the -ms prefix, and not include other prefixes simply because this is such an early stage specification, and by the time there are implementations in other browsers there may be inconsistencies. The implementation I describe today may well change, but is also there for your feedback. If you don’t have access to IE10, then one way to view and test these examples is by signing up for an account with Browserstack – the free trial would give you time to have a look. I have also included screenshots of all relevant stages in creating the examples. What is CSS3 grid layout? CSS3 grid layout aims to let developers divide up a design into a grid and place content on to that grid. Rather than trying to fabricate a grid from floats, you can declare an actual grid on a c… | 2012 | Rachel Andrew | rachelandrew | 2012-12-18T00:00:00+00:00 | https://24ways.org/2012/css3-grid-layout/ | code |
| 320 | 320 | DOM Scripting Your Way to Better Blockquotes | Block quotes are great. I don’t mean they’re great for indenting content – that would be an abuse of the browser’s default styling. I mean they’re great for semantically marking up a chunk of text that is being quoted verbatim. They’re especially useful in blog posts. <blockquote> <p>Progressive Enhancement, as a label for a strategy for Web design, was coined by Steven Champeon in a series of articles and presentations for Webmonkey and the SxSW Interactive conference.</p> </blockquote> Notice that you can’t just put the quoted text directly between the <blockquote> tags. In order for your markup to be valid, block quotes may only contain block-level elements such as paragraphs. There is an optional cite attribute that you can place in the opening <blockquote> tag. This should contain a URL containing the original text you are quoting: <blockquote cite="http://en.wikipedia.org/wiki/Progressive_Enhancement"> <p>Progressive Enhancement, as a label for a strategy for Web design, was coined by Steven Champeon in a series of articles and presentations for Webmonkey and the SxSW Interactive conference.</p> </blockquote> Great! Except… the default behavior in most browsers is to completely ignore the cite attribute. Even though it contains important and useful information, the URL in the cite attribute is hidden. You could simply duplicate the information with a hyperlink at the end of the quoted text: <blockquote cite="http://en.wikipedia.org/wiki/Progressive_Enhancement"> <p>Progressive Enhancement, as a label for a strategy for Web design, was coined by Steven Champeon in a series of articles and presentations for Webmonkey and the SxSW Interactive conference.</p> <p class="attribution"> <a href="http://en.wikipedia.org/wiki/Progressive_Enhancement">source</a> </p> </blockquote> But somehow it feels wrong to have to write out the same URL twice every time you want to quote something. It could also get very tedious if you have a lot of… | 2005 | Jeremy Keith | jeremykeith | 2005-12-05T00:00:00+00:00 | https://24ways.org/2005/dom-scripting-your-way-to-better-blockquotes/ | code |
| 309 | 309 | HTTP/2 Server Push and Service Workers: The Perfect Partnership | Being a web developer today is exciting! The web has come a long way since its early days and there are so many great technologies that enable us to build faster, better experiences for our users. One of these technologies is HTTP/2 which has a killer feature known as HTTP/2 Server Push. During this year’s Chrome Developer Summit, I watched a really informative talk by Sam Saccone, a Software Engineer on the Google Chrome team. He gave a talk entitled Planning for Performance, and one of the topics that he covered immediately piqued my interest; the idea that HTTP/2 Server Push and Service Workers were the perfect web performance combination. If you’ve never heard of HTTP/2 Server Push before, fear not - it’s not as scary as it sounds. HTTP/2 Server Push simply allows the server to send data to the browser without having to wait for the browser to explicitly request it first. In this article, I am going to run through the basics of HTTP/2 Server Push and show you how, when combined with Service Workers, you can deliver the ultimate in web performance to your users. What is HTTP/2 Server Push? When a user navigates to a URL, a browser will make an HTTP request for the underlying web page. The browser will then scan the contents of the HTML document for any assets that it may need to retrieve such as CSS, JavaScript or images. Once it finds any assets that it needs, it will then make multiple HTTP requests for each resource that it needs and begin downloading one by one. While this approach works well, the problem is that each HTTP request means more round trips to the server before any data arrives at the browser. These extra round trips take time and can make your web pages load slower. Before we go any further, let’s see what this might look like when your browser makes a request for a web page. If you were to view this in the developer tools of your browser, it might look a little something like this: As you can see from the image above, once the HTML file has been downloaded and parsed, the browser then mak… | 2016 | Dean Hume | deanhume | 2016-12-15T00:00:00+00:00 | https://24ways.org/2016/http2-server-push-and-service-workers/ | code |
| 315 | 315 | Edit-in-Place with Ajax | Back on day one we looked at using the Prototype library to take all the hard work out of making a simple Ajax call. While that was fun and all, it didn’t go that far towards implementing something really practical. We dipped our toes in, but haven’t learned to swim yet. So here is swimming lesson number one. Anyone who’s used Flickr to publish their photos will be familiar with the edit-in-place system used for quickly amending titles and descriptions on photographs. Hovering over an item turns its background yellow to indicate it is editable. A simple click loads the text into an edit box, right there on the page. Prototype includes all sorts of useful methods to help reproduce something like this for our own projects. As well as the simple Ajax GETs we learned how to do last time, we can also do POSTs (which we’ll need here) and a whole bunch of manipulations to the user interface – all through simple library calls. Here’s what we’re building, so let’s do it. Getting Started There are two major components to this process; the user interface manipulation and the Ajax call itself. Our set-up is much the same as last time (you may wish to read the first article if you’ve not already done so). We have a basic HTML page which links in the prototype.js file and our own editinplace.js. Here’s what Santa dropped down my chimney: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <title>Edit-in-Place with Ajax</title> <link href="editinplace.css" rel="Stylesheet" type="text/css" /> <script src="prototype.js" type="text/javascript"></script> <script src="editinplace.js" type="text/javascript"></script> </head> <body> <h1>Edit-in-place</h1> <p id="desc">Dashing through the snow on a one horse open sleigh.</p> </body> </html> So that’s our page. The editable item is … | 2005 | Drew McLellan | drewmclellan | 2005-12-23T00:00:00+00:00 | https://24ways.org/2005/edit-in-place-with-ajax/ | code |
| 319 | 319 | Avoiding CSS Hacks for Internet Explorer | Back in October, IEBlog issued a call to action, asking developers to clean up their CSS hacks for IE7 testing. Needless to say, a lot of hubbub ensued… both on IEBlog and elsewhere. My contribution to all of the noise was to suggest that developers review their code and use good CSS hacks. But what makes a good hack? Tantek Çelik, the Godfather of CSS hacks, gave us the answer by explaining how CSS hacks should be designed. In short, they should (1) be valid, (2) target only old/frozen/abandoned user-agents/browsers, and (3) be ugly. Tantek also went on to explain that using a feature of CSS is not a hack. Now, I’m not a frequent user of CSS hacks, but Tantek’s post made sense to me. In particular, I felt it gave developers direction on how we should be coding to accommodate that sometimes troublesome browser, Internet Explorer. But what I’ve found, through my work with other developers, is that there is still much confusion over the use of CSS hacks and IE. Using examples from the code I’ve seen recently, allow me to demonstrate how to clean up some IE-specific CSS hacks. The two hacks that I’ve found most often in the code I’ve seen and worked with are the star html bug and the underscore hack. We know these are both IE-specific by checking Kevin Smith’s CSS Filters chart. Let’s look at each of these hacks and see how we can replace them with the same CSS feature-based solution. The star html bug This hack violates Tantek’s second rule as it targets current (and future) UAs. I’ve seen this both as a stand alone rule, as well as an override to some other rule in a style sheet. Here are some code samples: * html div#header {margin-top:-3px;} .promo h3 {min-height:21px;} * html .promo h3 {height:21px;} The underscore hack This hack violates Tantek’s first two rules: it’s invalid (according to the W3C CSS Validator) and it targets current UAs. Here’s an example: ol {padding:0; _padding-left:5px;} Using child selectors We can use the child selector to replace both the star html bug and underscore hack. H… | 2005 | Kimberly Blessing | kimberlyblessing | 2005-12-17T00:00:00+00:00 | https://24ways.org/2005/avoiding-css-hacks-for-internet-explorer/ | code |
| 331 | 331 | Splintered Striper | Back in March 2004, David F. Miller demonstrated a little bit of DOM scripting magic in his A List Apart article Zebra Tables. His script programmatically adds two alternating CSS background colours to table rows, making them more readable and visually pleasing, while saving the document author the tedious task of manually assigning the styling to large static data tables. Although David’s original script performs its duty well, it is nonetheless very specific and limited in its application. It only: works on a single table, identified by its id, with at least a single tbody section assigns a background colour allows two colours for odd and even rows acts on data cells, rather than rows, and then only if they have no class or background colour already defined Taking it further In a recent project I found myself needing to apply a striped effect to a medium sized unordered list. Instead of simply modifying the Zebra Tables code for this particular case, I decided to completely recode the script to make it more generic. Being more general purpose, the function in my splintered striper experiment is necessarily more complex. Where the original script only expected a single parameter (the id of the target table), the new function is called as follows: striper('[parent element tag]','[parent element class or null]','[child element tag]','[comma separated list of classes]') This new, fairly self-explanatory function: targets any type of parent element (and, if specified, only those with a certain class) assigns two or more classes (rather than just two background colours) to the child elements inside the parent preserves any existing classes already assigned to the child elements See it in action View the demonstration page for three usage examples. For simplicity’s sake, we’re making the calls to the striper function from the body’s onload attribute. In a real deployment situation, we would look at attaching a behaviour to the onload programmatically — just remember that, as we need to pass varia… | 2005 | Patrick Lauke | patricklauke | 2005-12-15T00:00:00+00:00 | https://24ways.org/2005/splintered-striper/ | code |
| 171 | 171 | Rock Solid HTML Emails | At some stage in your career, it’s likely you’ll be asked by a client to design a HTML email. Before you rush to explain that all the cool kids are using social media, keep in mind that when done correctly, email is still one of the best ways to promote you and your clients online. In fact, a recent survey showed that every dollar spent on email marketing this year generated more than $40 in return. That’s more than any other marketing channel, including the cool ones. There are a whole host of ingredients that contribute to a good email marketing campaign. Permission, relevance, timeliness and engaging content are all important. Even so, the biggest challenge for designers still remains building an email that renders well across all the popular email clients. Same same, but different Before getting into the details, there are some uncomfortable facts that those new to HTML email should be aware of. Building an email is not like building for the web. While web browsers continue their onward march towards standards, many email clients have stubbornly stayed put. Some have even gone backwards. In 2007, Microsoft switched the Outlook rendering engine from Internet Explorer to Word. Yes, as in the word processor. Add to this the quirks of the major web-based email clients like Gmail and Hotmail, sprinkle in a little Lotus Notes and you’ll soon realize how different the email game is. While it’s not without its challenges, rest assured it can be done. In my experience the key is to focus on three things. First, you should keep it simple. The more complex your email design, the more likely is it to choke on one of the popular clients with poor standards support. Second, you need to take your coding skills back a good decade. That often means nesting tables, bringing CSS inline and following the coding guidelines I’ll outline below. Finally, you need to test your designs regularly. Just because a template looks nice in Hotmail now, doesn’t mean it will next week. Setting your lowest common denominator To maintain … | 2009 | David Greiner | davidgreiner | 2009-12-13T00:00:00+00:00 | https://24ways.org/2009/rock-solid-html-emails/ | code |
| 161 | 161 | Keeping JavaScript Dependencies At Bay | As we are writing more and more complex JavaScript applications we run into issues that have hitherto (god I love that word) not been an issue. The first decision we have to make is what to do when planning our app: one big massive JS file or a lot of smaller, specialised files separated by task. Personally, I tend to favour the latter, mainly because it allows you to work on components in parallel with other developers without lots of clashes in your version control. It also means that your application will be more lightweight as you only include components on demand. Starting with a global object This is why it is a good plan to start your app with one single object that also becomes the namespace for the whole application, say for example myAwesomeApp: var myAwesomeApp = {}; You can nest any necessary components into this one and also make sure that you check for dependencies like DOM support right up front. Adding the components The other thing to add to this main object is a components object, which defines all the components that are there and their file names. var myAwesomeApp = { components :{ formcheck:{ url:'formcheck.js', loaded:false }, dynamicnav:{ url:'dynamicnav.js', loaded:false }, gallery:{ url:'gallery.js', loaded:false }, lightbox:{ url:'lightbox.js', loaded:false } } }; Technically you can also omit the loaded properties, but it is cleaner this way. The next thing to add is an addComponent function that can load your components on demand by adding new SCRIPT elements to the head of the documents when they are needed. var myAwesomeApp = { components :{ formcheck:{ url:'formcheck.js', loaded:false }, dynamicnav:{ url:'dynamicnav.js', loaded:false }, gallery:{ url:'gallery.js', loaded:false }, lightbox:{ url:'lightbox.js', loaded:false } }, addComponent:function(component){ var c = this.components[component]; if(c && c.loaded === false){ var s = document.createElement('script'); s.setAttribut… | 2007 | Christian Heilmann | chrisheilmann | 2007-12-18T00:00:00+00:00 | https://24ways.org/2007/keeping-javascript-dependencies-at-bay/ | code |
| 271 | 271 | Creating Custom Font Stacks with Unicode-Range | Any web designer or front-end developer worth their salt will be familiar with the CSS @font-face rule used for embedding fonts in a web page. We’ve all used it — either directly in our code ourselves, or via one of the web font services like Fontdeck, Typekit or Google Fonts. If you’re like me, however, you’ll be used to just copying and pasting in a specific incantation of lines designed to get different formats of fonts working in different browsers, and may not have really explored all the capabilities of @font-face properties as defined by the spec. One such property — the unicode-range descriptor — sounds pretty dull and is easily overlooked. It does, however, have some fairly interesting possibilities when put to use in creative ways. Unicode-range The unicode-range descriptor is designed to help when using fonts that don’t have full coverage of the characters used in a page. By adding a unicode-range property to a @font-face rule it is possible to specify the range of characters the font covers. @font-face { font-family: BBCBengali; src: url(fonts/BBCBengali.ttf) format("opentype"); unicode-range: U+00-FF; } In this example, the font is to be used for characters in the range of U+00 to U+FF which runs from the unexciting control characters at the start of the Unicode table (symbols like the exclamation mark start at U+21) right through to ÿ at U+FF – the extent of the Basic Latin character range. By adding multiple @font-face rules for the same family but with different ranges, you can build up complete coverage of the characters your page uses by using different fonts. When I say that it’s possible to specify the range of characters the font covers, that’s true, but what you’re really doing with the unicode-range property is declaring which characters the font should be used for. This becomes interesting, because instead of merely working with the technical constraints of available characters in a given font, we can start picking and choosing characters to use and selectively mix fon… | 2011 | Drew McLellan | drewmclellan | 2011-12-01T00:00:00+00:00 | https://24ways.org/2011/creating-custom-font-stacks-with-unicode-range/ | code |
| 86 | 86 | Flashless Animation | Animation in a Flashless world When I splashed down in web design four years ago, the first thing I wanted to do was animate a cartoon in the browser. I’d been drawing comics for years, and I’ve wanted to see them come to life for nearly as long. Flash animation was still riding high, but I didn’t want to learn Flash. I wanted to learn JavaScript! Sadly, animating with JavaScript was limiting and resource-intensive. My initial foray into an infinitely looping background did more to burn a hole in my CPU than amaze my friends (although it still looks pretty cool). And there was still no simple way to incorporate audio. The browser technology just wasn’t there. Things are different now. CSS3 transitions and animations can do most of the heavy lifting and HTML5 audio can serve up the music and audio clips. You can do a lot without leaning on JavaScript at all, and when you lean on JavaScript, you can do so much more! In this project, I’m going to show you how to animate a simple walk cycle with looping audio. I hope this will inspire you to do something really cool and impress your friends. I’d love to see what you come up with, so please send your creations my way at rachelnabors.com! Note: Because every browser wants to use its own prefixes with CSS3 animations, and I have neither the time nor the space to write all of them out, I will use the W3C standard syntaxes; that is, going prefix-less. You can implement them out of the box with something like Prefixfree, or you can add prefixes on your own. If you take the latter route, I recommend using Sass and Compass so you can focus on your animations, not copying and pasting. The walk cycle Walk cycles are the “Hello world” of animation. One of the first projects of animation students is to spend hours drawing dozens of frames to complete a simple loopable animation of a character walking. Most animators don’t have to draw every frame themselves, though. They draw a few key frames and send those on to production animators to work on the between frames (or twe… | 2012 | Rachel Nabors | rachelnabors | 2012-12-06T00:00:00+00:00 | https://24ways.org/2012/flashless-animation/ | code |
| 247 | 247 | Managing Flow and Rhythm with CSS Custom Properties | An important part of designing user interfaces is creating consistent vertical rhythm between elements. Creating consistent, predictable space doesn’t just make your web pages and views look better, but it can also improve the scan-ability. Browsers ship with default CSS and these styles often create consistent rhythm for flow elements out of the box. The problem is though that we often reset these styles with a reset. Elements such as <div> and <section> also have no default margin or padding associated with them. I’ve tried all sorts of weird and wonderful techniques to find a balance between using inherited CSS while also levelling the playing field for component driven front-ends with very little success. This experimentation is how I landed on the flow utility, though and I’m going to show you how it works. Let’s dive in! The Flow utility With the ever-growing number of folks working with component libraries and design systems, we could benefit from a utility that creates space for us, only when it’s appropriate to do so. The problem with my previous attempts at fixing this is that the spacing values were very rigid. That’s fine for 90% of contexts, but sometimes, it’s handy to be able to tweak the values based on the exact context of your component. This is where CSS Custom Properties come in handy. The code .flow { --flow-space: 1em; } .flow > * + * { margin-top: var(--flow-space); } What this code does is enable you to add a class of flow to an element which will then add margin-top to sibling elements within that element. We use the lobotomised owl selector to select these siblings. This approach enables an almost anonymous and automatic system which is ideal for component library based front-ends where components probably don’t have any idea what surrounds them. The other important part of this utility is the usage of the --flow-space custom property. We define it in the .flow component and each element within it will be spaced by --flow-space, by default. The beauty about setting this as a … | 2018 | Andy Bell | andybell | 2018-12-07T00:00:00+00:00 | https://24ways.org/2018/managing-flow-and-rhythm-with-css-custom-properties/ | code |
| 231 | 231 | Designing for iOS: Life Beyond Media Queries | Although not a new phenomenon, media queries seem to be getting a lot attention online recently and for the right reasons too – it’s great to be able to adapt a design with just a few lines of CSS – but many people are relying only on them to create an iPhone-specific version of their website. I was pleased to hear at FOWD NYC a few weeks ago that both myself and Aral Balkan share the same views on why media queries aren’t always going to be the best solution for mobile. Both of us specialise in iPhone design ourselves and we opt for a different approach to media queries. The trouble is, regardless of what you have carefully selected to be display:none; in your CSS, the iPhone still loads everything in the background; all that large imagery for your full scale website also takes up valuable mobile bandwidth and time. You can greatly increase the speed of your website by creating a specific site tailored to mobile users with just a few handy pointers – media queries, in some instances, might be perfectly suitable but, in others, here’s what you can do. Redirect your iPhone/iPod Touch users To detect whether someone is viewing your site on an iPhone or iPod Touch, you can either use JavaScript or PHP. The JavaScript if((navigator.userAgent.match(/iPhone/i)) || (navigator.userAgent.match(/iPod/i))) { if (document.cookie.indexOf("iphone_redirect=false") == -1) window.location = "http://mobile.yoursitehere.com"; } The PHP if(strstr($_SERVER['HTTP_USER_AGENT'],'iPhone') || strstr($_SERVER['HTTP_USER_AGENT'],'iPod')) { header('Location: http://mobile.yoursitehere.com'); exit(); } Both of these methods redirect the user to a site that you have made specifically for the iPhone. At this point, be sure to provide a link to the full version of the website, in case the user wishes to view this and not be thrown into an experience they didn’t want, with no way back. Tailoring your site So, now you’ve got 320 × 480 pixels of screen to play with – and to create a style sheet for, just as you would fo… | 2010 | Sarah Parmenter | sarahparmenter | 2010-12-17T00:00:00+00:00 | https://24ways.org/2010/life-beyond-media-queries/ | code |
| 211 | 211 | Automating Your Accessibility Tests | Accessibility is one of those things we all wish we were better at. It can lead to a bunch of questions like: how do we make our site better? How do we test what we have done? Should we spend time each day going through our site to check everything by hand? Or just hope that everyone on our team has remembered to check their changes are accessible? This is where automated accessibility tests can come in. We can set up automated tests and have them run whenever someone makes a pull request, and even alongside end-to-end tests, too. Automated tests can’t cover everything however; only 20 to 50% of accessibility issues can be detected automatically. For example, we can’t yet automate the comparison of an alt attribute with an image’s content, and there are some screen reader tests that need to be carried out by hand too. To ensure our site is as accessible as possible, we will still need to carry out manual tests, and I will cover these later. First, I’m going to explain how I implemented automated accessibility tests on Elsevier’s ecommerce pages, and share some of the lessons I learnt along the way. Picking the right tool One of the hardest, but most important parts of creating our automated accessibility tests was choosing the right tool. We began by investigating aXe CLI, but soon realised it wouldn’t fit our requirements. It couldn’t check pages that required a visitor to log in, so while we could test our product pages, we couldn’t test any customer account pages. Instead we moved over to Pa11y. Its beforeScript step meant we could log into the site and test pages such as the order history. The example below shows the how the beforeScript step completes a login form and then waits for the login to complete before testing the page: beforeScript: function(page, options, next) { // An example function that can be used to make sure changes have been confirmed before continuing to run Pa11y function waitUntil(condition, retries, waitOver) { page.evaluate(condition, function(err, result) { if (result … | 2017 | Seren Davies | serendavies | 2017-12-07T00:00:00+00:00 | https://24ways.org/2017/automating-your-accessibility-tests/ | code |
| 65 | 65 | The Accessibility Mindset | Accessibility is often characterized as additional work, hard to learn and only affecting a small number of people. Those myths have no logical foundation and often stem from outdated information or misconceptions. Indeed, it is an additional skill set to acquire, quite like learning new JavaScript frameworks, CSS layout techniques or new HTML elements. But it isn’t particularly harder to learn than those other skills. A World Health Organization (WHO) report on disabilities states that, [i]ncluding children, over a billion people (or about 15% of the world’s population) were estimated to be living with disability. Being disabled is not as unusual as one might think. Due to chronic health conditions and older people having a higher risk of disability, we are also currently paving the cowpath to an internet that we can still use in the future. Accessibility has a very close relationship with usability, and advancements in accessibility often yield improvements in the usability of a website. Websites are also more adaptable to users’ needs when they are built in an accessible fashion. Beyond the bare minimum In the time of table layouts, web developers could create code that passed validation rules but didn’t adhere to the underlying semantic HTML model. We later developed best practices, like using lists for navigation, and with HTML5 we started to wrap those lists in nav elements. Working with accessibility standards is similar. The Web Content Accessibility Guidelines (WCAG) 2.0 can inform your decision to make websites accessible and can be used to test that you met the success criteria. What it can’t do is measure how well you met them. W3C developed a long list of techniques that can be used to make your website accessible, but you might find yourself in a situation where you need to adapt those techniques to be the most usable solution for your particular problem. The checkbox below is implemented in an accessible way: The input element has an id and the label associated with the checkbox refers to the in… | 2015 | Eric Eggert | ericeggert | 2015-12-17T00:00:00+00:00 | https://24ways.org/2015/the-accessibility-mindset/ | code |
| 164 | 164 | My Other Christmas Present Is a Definition List | A note from the editors: readers should note that the HTML5 redefinition of definition lists has come to pass and is now à la mode. Last year, I looked at how the markup for tag clouds was generally terrible. I thought this year I would look not at a method of marking up a common module, but instead just at a simple part of HTML and how it generally gets abused. No, not tables. Definition lists. Ah, definition lists. Often used but rarely understood. Examining the definition of definitions To start with, let’s see what the HTML spec has to say about them. Definition lists vary only slightly from other types of lists in that list items consist of two parts: a term and a description. The canonical example of a definition list is a dictionary. Words can have multiple descriptions (even the word definition has at least five). Also, many terms can share a single definition (for example, the word colour can also be spelt color, but they have the same definition). Excellent, we can all grasp that. But it very quickly starts to fall apart. Even in the HTML specification the definition list is mis-used. Another application of DL, for example, is for marking up dialogues, with each DT naming a speaker, and each DD containing his or her words. Wrong. Completely and utterly wrong. This is the biggest flaw in the HTML spec, along with dropping support for the start attribute on ordered lists. “Why?”, you may ask. Let me give you an example from Romeo and Juliet, act 2, scene 2. <dt>Juliet</dt> <dd>Romeo!</dd> <dt>Romeo</dt> <dd>My niesse?</dd> <dt>Juliet</dt> <dd>At what o'clock tomorrow shall I send to thee?</dd> <dt>Romeo</dt> <dd>At the hour of nine.</dd> Now, the problem here is that a given definition can have multiple descriptions (the DD). Really the dialog “descriptions” should be rolled up under the terms, like so: <dt>Juliet</dt> <dd>Romeo!</dd> <dd>At what o'clock tomorrow shall I send to thee?</dd> <dt>Romeo</dt> <dd>… | 2007 | Mark Norman Francis | marknormanfrancis | 2007-12-05T00:00:00+00:00 | https://24ways.org/2007/my-other-christmas-present-is-a-definition-list/ | code |
| 109 | 109 | Geotag Everywhere with Fire Eagle | A note from the editors: Since this article was written Yahoo! has retired the Fire Eagle service. Location, they say, is everywhere. Everyone has one, all of the time. But on the web, it’s taken until this year to see the emergence of location in the applications we use and build. The possibilities are broad. Increasingly, mobile phones provide SDKs to approximate your location wherever you are, browser extensions such as Loki and Mozilla’s Geode provide browser-level APIs to establish your location from the proximity of wireless networks to your laptop. Yahoo’s Brickhouse group launched Fire Eagle, an ambitious location broker enabling people to take their location from any of these devices or sources, and provide it to a plethora of web services. It enables you to take the location information that only your iPhone knows about and use it anywhere on the web. That said, this is still a time of location as an emerging technology. Fire Eagle stores your location on the web (protected by application-specific access controls), but to try and give an idea of how useful and powerful your location can be — regardless of the services you use now — today’s 24ways is going to build a bookmarklet to call up your location on demand, in any web application. Location Support on the Web Over the past year, the number of applications implementing location features has increased dramatically. Plazes and Brightkite are both full featured social networks based around where you are, whilst Pownce rolled in Fire Eagle support to allow geotagging of all the content you post to their microblogging service. Dipity’s beautiful timeline shows for you moving from place to place and Six Apart’s activity stream for Movable Type started exposing your movements. The number of services that hook into Fire Eagle will increase as location awareness spreads through the developer community, but you can use your location on other sites indirectly too. Consider Flickr. … | 2008 | Ben Ward | benward | 2008-12-21T00:00:00+00:00 | https://24ways.org/2008/geotag-everywhere-with-fire-eagle/ | code |
| 100 | 100 | Moo'y Christmas | A note from the editors: Moo has changed their API since this article was written. As the web matures, it is less and less just about the virtual world. It is becoming entangled with our world and it is harder to tell what is virtual and what is real. There are several companies who are blurring this line and make the virtual just an extension of the physical. Moo is one such company. Moo offers simple print on demand services. You can print business cards, moo mini cards, stickers, postcards and more. They give you the ability to upload your images, customize them, then have them sent to your door. Many companies allow this sort of digital to physical interaction, but Moo has taken it one step further and has built an API. Printable stocking stuffers The Moo API consists of a simple XML file that is sent to their servers. It describes all the information needed to dynamically assemble and print your object. This is very helpful, not just for when you want to print your own stickers, but when you want to offer them to your customers, friends, organization or community with no hassle. Moo handles the check-out and shipping, all you need to do is what you do best, create! Now using an API sounds complicated, but it is actually very easy. I am going to walk you through the options so you can easily be printing in no time. Before you can begin sending data to the Moo API, you need to register and get an API key. This is important, because it allows Moo to track usage and to credit you. To register, visit http://www.moo.com/api/ and click “Request an API key”. In the following examples, I will use {YOUR API KEY HERE} as a place holder, replace that with your API key and everything will work fine. First thing you need to do is to create an XML file to describe the check-out basket. Open any text-editor and start with some XML basics. Don’t worry, this is pretty simple and Moo gives you a few tools to check your XML for errors before… | 2008 | Brian Suda | briansuda | 2008-12-19T00:00:00+00:00 | https://24ways.org/2008/mooy-christmas/ | code |
| 46 | 46 | Responsive Enhancement | 24 ways has been going strong for ten years. That’s an aeon in internet timescales. Just think of all the changes we’ve seen in that time: the rise of Ajax, the explosion of mobile devices, the unrecognisably changed landscape of front-end tooling. Tools and technologies come and go, but one thing has remained constant for me over the past decade: progressive enhancement. Progressive enhancement isn’t a technology. It’s more like a way of thinking. Instead of thinking about the specifics of how a finished website might look, progressive enhancement encourages you to think about the fundamental meaning of what the website is providing. So instead of thinking of a website in terms of its ideal state in a modern browser on a nice widescreen device, progressive enhancement allows you to think about the core functionality in a more abstract way. Once you’ve figured out what the core functionality is – adding an item to a shopping cart, posting a message, sharing a photo – then you can enable that functionality in the simplest possible way. That usually means starting with good old-fashioned HTML. Links and forms are often all you need. Then, once you have the core functionality working in a basic way, you can start to enhance to make a progressively better experience for more modern browsers. The advantage of working this way isn’t just that your site will work in older browsers (albeit in a rudimentary way). It also ensures that if anything goes wrong in a modern browser, it won’t be catastrophic. There’s a common misconception that progressive enhancement means that you’ll spend your time dealing with older browsers, but in fact the opposite is true. Putting the basic functionality into place doesn’t take very long at all. And once you’ve done that, you’re free to spend all your time experimenting with the latest and greatest browser technologies, secure in the knowledge that even if they aren’t universally supported yet, that’s OK: you’ve already got your fallback in place. The key to thinking about web devel… | 2014 | Jeremy Keith | jeremykeith | 2014-12-09T00:00:00+00:00 | https://24ways.org/2014/responsive-enhancement/ | code |
Advanced export
JSON shape: default, array, newline-delimited
CREATE TABLE [articles] (
[title] TEXT ,
[contents] TEXT ,
[year] TEXT ,
[author] TEXT ,
[author_slug] TEXT ,
[published] TEXT ,
[url] TEXT ,
[topic] TEXT
);