articles
151 rows where topic = "code" sorted by contents descending
This data as json, CSV (advanced)
Suggested facets: year, published (date)
| Link | rowid | title | contents ▲ | year | author | author_slug | published | url | topic |
|---|---|---|---|---|---|---|---|---|---|
| 8 | 8 | Coding Towards Accessibility | “Can we make it AAA-compliant?” – does this question strike fear into your heart? Maybe for no other reason than because you will soon have to wade through the impenetrable WCAG documentation once again, to find out exactly what AAA-compliant means? I’m not here to talk about that. The Web Content Accessibility Guidelines are a comprehensive and peer-reviewed resource which we’re lucky to have at our fingertips. But they are also a pig to read, and they may have contributed to the sense of mystery and dread with which some developers associate the word accessibility. This Christmas, I want to share with you some thoughts and some practical tips for building accessible interfaces which you can start using today, without having to do a ton of reading or changing your tools and workflow. But first, let’s clear up a couple of misconceptions. Dreary, flat experiences I recently built a front-end framework for the Post Office. This was a great gig for a developer, but when I found out about my client’s stringent accessibility requirements I was concerned that I’d have to scale back what was quite a complex set of visual designs. Sites like Jakob Neilsen’s old workhorse useit.com and even the pioneering GOV.UK may have to shoulder some of the blame for this. They put a premium on usability and accessibility over visual flourish. (Although, in fairness to Mr Neilsen, his new site nngroup.com is really quite a snazzy affair, comparatively.) Of course, there are other reasons for these sites’ aesthetics — and it’s not because of the limitations of the form. You can make an accessible site look as glossy or as plain as you want it to look. It’s always our own ingenuity and attention to detail that are going to be the limiting factors. Synecdoche We must always guard against the tendency to assume that catering to screen readers means we have the whole accessibility ballgame covered. There’s so much more to accessibility than assistive technology, as you know. And within the field of assistive technology there ar… | 2013 | Charlie Perrins | charlieperrins | 2013-12-03T00:00:00+00:00 | https://24ways.org/2013/coding-towards-accessibility/ | code |
| 162 | 162 | Conditional Love | “Browser.” The four-letter word of web design. I mean, let’s face it: on the good days, when things just work in your target browsers, it’s marvelous. The air smells sweeter, birds’ songs sound more melodious, and both your design and your code are looking sharp. But on the less-than-good days (which is, frankly, most of them), you’re compelled to tie up all your browsers in a sack, heave them into the nearest river, and start designing all-imagemap websites. We all play favorites, after all: some will swear by Firefox, Opera fans are allegedly legion, and others still will frown upon anything less than the latest WebKit nightly. Thankfully, we do have an out for those little inconsistencies that crop up when dealing with cross-browser testing: CSS patches. Spare the Rod, Hack the Browser Before committing browsercide over some rendering bug, a designer will typically reach for a snippet of CSS fix the faulty browser. Historically referred to as “hacks,” I prefer Dan Cederholm’s more client-friendly alternative, “patches”. But whatever you call them, CSS patches all work along the same principle: supply the proper property value to the good browsers, while giving higher maintenance other browsers an incorrect value that their frustrating idiosyncratic rendering engine can understand. Traditionally, this has been done either by exploiting incomplete CSS support: #content { height: 1%; // Let's force hasLayout for old versions of IE. line-height: 1.6; padding: 1em; } html>body #content { height: auto; // Modern browsers get a proper height value. } or by exploiting bugs in their rendering engine to deliver alternate style rules: #content p { font-size: .8em; /* Hide from Mac IE5 \*/ font-size: .9em; /* End hiding from Mac IE5 */ } We’ve even used these exploits to serve up whole stylesheets altogether: @import url("core.css"); @media tty { i{content:"\";/*" "*/}} @import 'windows-ie5.css'; /*";} }/* */ The list goes on, and on, and on. For every browser, for every bug, there’s a patch availab… | 2007 | Ethan Marcotte | ethanmarcotte | 2007-12-15T00:00:00+00:00 | https://24ways.org/2007/conditional-love/ | code |
| 70 | 70 | Bringing Your Code to the Streets | — or How to Be a Street VJ Our amazing world of web code is escaping out of the browser at an alarming rate and appearing in every aspect of the environment around us. Over the past few years we’ve already seen JavaScript used server-side, hardware coded with JavaScript, a rise of native style and desktop apps created with HTML, CSS and JavaScript, and even virtual reality (VR) is getting its fair share of front-end goodness. You can go ahead and play with JavaScript-powered hardware such as the Tessel or the Espruino to name a couple. Just check out the Tessel project page to see JavaScript in the world of coffee roasting or sleep tracking your pet. With the rise of the internet of things, JavaScript can be seen collecting information on flooding among other things. And if that’s not enough ‘outside the browser’ implementations, Node.js servers can even be found in aircraft! I previously mentioned VR and with three.js’s extra StereoEffect.js module it’s relatively simple to get browser 3D goodness to be Google Cardboard-ready, and thus set the stage for all things JavaScript and VR. It’s been pretty popular in the art world too, with interactive works such as Seb Lee-Delisle’s Lunar Trails installation, featuring the old arcade game Lunar Lander, which you can now play in your browser while others watch (it is the web after all). The Science Museum in London held Chrome Web Lab, an interactive exhibition featuring five experiments, showcasing the magic of the web. And it’s not even the connectivity of the web that’s being showcased; we can even take things offline and use web code for amazing things, such as fighting Ebola. One thing is for sure, JavaScript is awesome. Hell, if you believe those telly programs (as we all do), JavaScript can even take down the stock market, purely through the witchcraft of canvas! Go JavaScript! Now it’s our turn So I wanted to create a little project influenced by this theme, and as it’s Christmas, take it to the streets for a little bit of party fun! Something that could take c… | 2015 | Ruth John | ruthjohn | 2015-12-06T00:00:00+00:00 | https://24ways.org/2015/bringing-your-code-to-the-streets/ | code |
| 153 | 153 | JavaScript Internationalisation | or: Why Rudolph Is More Than Just a Shiny Nose Dunder sat, glumly staring at the computer screen. “What’s up, Dunder?” asked Rudolph, entering the stable and shaking off the snow from his antlers. “Well,” Dunder replied, “I’ve just finished coding the new reindeer intranet Santa Claus asked me to do. You know how he likes to appear to be at the cutting edge, talking incessantly about Web 2.0, AJAX, rounded corners; he even spooked Comet recently by talking about him as if he were some pushy web server. “I’ve managed to keep him happy, whilst also keeping it usable, accessible, and gleaming — and I’m still on the back row of the sleigh! But anyway, given the elves will be the ones using the site, and they come from all over the world, the site is in multiple languages. Which is great, except when it comes to the preview JavaScript I’ve written for the reindeer order form. Here, have a look…” As he said that, he brought up the textileRef:8234272265470b85d91702:linkStartMarker:“order form in French”:/examples/javascript-internationalisation/initial.fr.html on the screen. (Same in English). “Looks good,” said Rudolph. “But if I add some items,” said Dunder, “the preview appears in English, as it’s hard-coded in the JavaScript. I don’t want separate code for each language, as that’s just silly — I thought about just having if statements, but that doesn’t scale at all…” “And there’s more, you aren’t displaying large numbers in French properly, either,” added Rudolph, who had been playing and looking at part of the source code: function update_text() { var hay = getValue('hay'); var carrots = getValue('carrots'); var bells = getValue('bells'); var total = 50 * bells + 30 * hay + 10 * carrots; var out = 'You are ordering ' + pretty_num(hay) + ' bushel' + pluralise(hay) + ' of hay, ' + pretty_num(carrots) + ' carrot' + pluralise(carrots) + ', and ' + pretty_num(bells) + ' shiny bell' + pluralise(bells) + ', at a total cost of <strong>' + pretty_num(total) + '</strong> gold pieces. Thank you.';… | 2007 | Matthew Somerville | matthewsomerville | 2007-12-08T00:00:00+00:00 | https://24ways.org/2007/javascript-internationalisation/ | code |
| 336 | 336 | Practical Microformats with hCard | You’ve probably heard about microformats over the last few months. You may have even read the easily digestible introduction at Digital Web Magazine, but perhaps you’ve not found time to actually implement much yet. That’s understandable, as it can sometimes be difficult to see exactly what you’re adding by applying a microformat to a page. Sure, you’re semantically enhancing the information you’re marking up, and the Semantic Web is a great idea and all, but what benefit is it right now, today? Well, the answer to that question is simple: you’re adding lots of information that can be and is being used on the web here and now. The big ongoing battle amongst the big web companies if one of territory over information. Everyone’s grasping for as much data as possible. Some of that information many of us are cautious to give away, but a lot of is happy to be freely available. Of the data you’re giving away, it makes sense to give it as much meaning as possible, thus enabling anyone from your friends and family to the giant search company down the road to make the most of it. Ok, enough of the waffle, let’s get working. Introducing hCard You may have come across hCard. It’s a microformat for describing contact information (or really address book information) from within your HTML. It’s based on the vCard format, which is the format the contacts/address book program on your computer uses. All the usual fields are available – name, address, town, website, email, you name it. If you’re running Firefox and Greasemonkey (or if you can, just to try this out), install this user script. What it does is look for instances of the hCard microformat in a page, and then add in a link to pass any hCards it finds to a web service which will convert it to a vCard. Take a look at the About the author box at the bottom of this article. It’s a hCard, so you should be able to click the icon the user script inserts and add me to your Outlook contacts or OS X Address Book with just a click. So microformats are useful after all. Free… | 2005 | Drew McLellan | drewmclellan | 2005-12-06T00:00:00+00:00 | https://24ways.org/2005/practical-microformats-with-hcard/ | code |
| 257 | 257 | The (Switch)-Case for State Machines in User Interfaces | You’re tasked with creating a login form. Email, password, submit button, done. “This will be easy,” you think to yourself. Login form by Selecto You’ve made similar forms many times in the past; it’s essentially muscle memory at this point. You’re working closely with a designer, who gives you a beautiful, detailed mockup of a login form. Sure, you’ll have to translate the pixels to meaningful, responsive CSS values, but that’s the least of your problems. As you’re writing up the HTML structure and CSS layout and styles for this form, you realize that you don’t know what the successful “logged in” page looks like. You remind the designer, who readily gives it to you. But then you start thinking more and more about how the login form is supposed to work. What if login fails? Where do those errors show up? Should we show errors differently if the user forgot to enter their email, or password, or both? Or should the submit button be disabled? Should we validate the email field? When should we show validation errors – as they’re typing their email, or when they move to the password field, or when they click submit? (Note: many, many login forms are guilty of this.) When should the errors disappear? What do we show during the login process? Some loading spinner? What if loading takes too long, or a server error occurs? Many more questions come up, and you (and your designer) are understandably frustrated. The lack of upfront specification opens the door to scope creep, which readily finds itself at home in all the unexplored edge cases. Modeling Behavior Describing all the possible user flows and business logic of an application can become tricky. Ironically, user stories might not tell the whole story – they often leave out potential edge-cases or small yet important bits of information. However, one important (and very old) mathematical model of computation can be used for describing the behavior and all possible states of a user interface: the finite state machine. The general idea, as it applies to user interfa… | 2018 | David Khourshid | davidkhourshid | 2018-12-12T00:00:00+00:00 | https://24ways.org/2018/state-machines-in-user-interfaces/ | code |
| 15 | 15 | Git for Grown-ups | You are a clever and talented person. You create beautiful designs, or perhaps you have architected a system that even my cat could use. Your peers adore you. Your clients love you. But, until now, you haven’t *&^#^! been able to make Git work. It makes you angry inside that you have to ask your co-worker, again, for that *&^#^! command to upload your work. It’s not you. It’s Git. Promise. Yes, this is an article about the popular version control system, Git. But unlike just about every other article written about Git, I’m not going to give you the top five commands that you need to memorize; and I’m not going to tell you all your problems would be solved if only you were using this GUI wrapper or that particular workflow. You see, I’ve come to a grand realization: when we teach Git, we’re doing it wrong. Let me back up for a second and tell you a little bit about the field of adult education. (Bear with me, it gets good and will leave you feeling both empowered and righteous.) Andragogy, unlike pedagogy, is a learner-driven educational experience. There are six main tenets to adult education: Adults prefer to know why they are learning something. The foundation of the learning activities should include experience. Adults prefer to be able to plan and evaluate their own instruction. Adults are more interested in learning things which directly impact their daily activities. Adults prefer learning to be oriented not towards content, but towards problems. Adults relate more to their own motivators than to external ones. Nowhere in this list does it include “memorize the five most popular Git commands”. And yet this is how we teach version control: init, add, commit, branch, push. You’re an expert! Sound familiar? In the hierarchy of learning, memorizing commands is the lowest, or most basic, form of learning. At the peak of learning you are able to not just analyze and evaluate a problem space, but create your own understanding in relation to your existing body of knowledge. “Fine,” I can hear you say… | 2013 | Emma Jane Westby | emmajanewestby | 2013-12-04T00:00:00+00:00 | https://24ways.org/2013/git-for-grownups/ | code |
| 201 | 201 | Lint the Web Forward With Sonarwhal | Years ago, when I was in a senior in college, much of my web development courses focused on two things: the basics like HTML and CSS (and boy, do I mean basic), and Adobe Flash. I spent many nights writing ActionScript 3.0 to build interactions for the websites that I would add to my portfolio. A few months after graduating, I built one website in Flash for a client, then never again. Flash was dying, and it became obsolete in my résumé and portfolio. That was my first lesson in the speed at which things change in technology, and what a daunting realization that was as a new graduate looking to enter the professional world. Now, seven years later, I work on the Microsoft Edge team where I help design and build a tool that would have lessened my early career anxieties: sonarwhal. Sonarwhal is a linting tool, built by and for the web community. The code is open source and lives under the JS Foundation. It helps web developers and designers like me keep up with the constant change in technology while simultaneously teaching how to code better websites. Introducing sonarwhal’s mascot Nellie Good web development is hard. It is more than HTML, CSS, and JavaScript: developers are expected to have a grasp of accessibility, performance, security, emerging standards, and more, all while refreshing this knowledge every few months as the web evolves. It’s a lot to keep track of. Web development is hard Staying up-to-date on all this knowledge is one of the driving forces for developing this scanning tool. Whether you are just starting out, are a student, or you have over a decade of experience, the sonarwhal team wants to help you build better websites for all browsers. Currently sonarwhal checks for best practices in five categories: Accessibility, Interoperability, Performance, PWAs, and Security. Each check is called a “rule”. You can configure them and even create your own rules if you need to follow some specific guidelines for your project (e.g. validate analytics attributes, title format of pages, etc.). You c… | 2017 | Stephanie Drescher | stephaniedrescher | 2017-12-02T00:00:00+00:00 | https://24ways.org/2017/lint-the-web-forward-with-sonarwhal/ | code |
| 242 | 242 | Creating My First Chrome Extension | Writing a Chrome Extension isn’t as scary at it seems! Not too long ago, I used a Chrome extension called 20 Cubed. I’m far-sighted, and being a software engineer makes it difficult to maintain distance vision. So I used 20 Cubed to remind myself to look away from my screen and rest my eyes. I loved its simple interface and design. I loved it so much, I often forgot to turn it off in the middle of presentations, where it would take over my entire screen. Oops. Unfortunately, the developer stopped updating the extension and removed it from Chrome’s extension library. I was so sad. None of the other eye rest extensions out there matched my design aesthetic, so I decided to create my own! Want to do the same? Fortunately, Google has some respectable documentation on how to create an extension. And remember, Chrome extensions are just HTML, CSS, and JavaScript. You can add libraries and frameworks, or you can just code the “old-fashioned” way. Sky’s the limit! Setup But first, some things you’ll need to know about before getting started: Callbacks Timeouts Chrome Dev Tools Developing with Chrome extension methods requires a lot of callbacks. If you’ve never experienced the joy of callback hell, creating a Chrome extension will introduce you to this concept. However, things can get confusing pretty quickly. I’d highly recommend brushing up on that subject before getting started. Hyperbole and a Half Timeouts and Intervals are another thing you might want to brush up on. While creating this extension, I didn’t consider the fact that I’d be juggling three timers. And I probably would’ve saved time organizing those and reading up on the Chrome extension Alarms documentation beforehand. But more on that in a bit. On the note of organization, abstraction is important! You might have any combination of the following: The Chrome extension options page The popup from the Chrome Menu The windows or tabs you create The background scripts And that can get unwieldy. You might also edit the existing tabs or windows in the brow… | 2018 | Jennifer Wong | jenniferwong | 2018-12-05T00:00:00+00:00 | https://24ways.org/2018/my-first-chrome-extension/ | code |
| 213 | 213 | Accessibility Through Semantic HTML | Working on Better, a tracker blocker, I spend an awful lot of my time with my nose in other people’s page sources. I’m mostly there looking for harmful tracking scripts, but often notice the HTML on some of the world’s most popular sites is in a sad state of neglect. What does neglected HTML look like? Here’s an example of the markup I found on a news site just yesterday. There’s a bit of text, a few links, and a few images. But mostly it’s div elements. <div class="block_wrapper"> <div class="block_content"> <div class="box"> <div id="block1242235"> <div class="column"> <div class="column_content"> <a class="close" href="#"><i class="fa"></i></a> </div> <div class="btn account_login"></div> Some text <span>more text</span> </div> </div> </div> </div> </div> divs and spans, why do we use them so much? While I find tracking scripts completely inexcusable, I do understand why people write HTML like the above. As developers, we like to use divs and spans as they’re generic elements. They come with no associated default browser styles or behaviour except that div displays as a block, and span displays inline. If we make our page up out of divs and spans, we know we’ll have absolute control over styles and behaviour cross-browser, and we won’t need a CSS reset. Absolute control may seem like an advantage, but there’s a greater benefit to less generic, more semantic elements. Browsers render semantic elements with their own distinct styles and behaviours. For example, button looks and behaves differently from a. And ul is different from ol. These defaults are shortcuts to a more usable and accessible web. They provide consistent and well-tested components for common interactions. Semantic elements aid usability A good example of how browser defaults can benefit the usability of an element is in the <select> option menu. In Safari on the desktop, the browser renders <select> as a popover-style menu. On a touchscreen, Safari overl… | 2017 | Laura Kalbag | laurakalbag | 2017-12-15T00:00:00+00:00 | https://24ways.org/2017/accessibility-through-semantic-html/ | code |
| 124 | 124 | Writing Responsible JavaScript | Without a doubt, JavaScript has been making something of a comeback in the last year. If you’re involved in client-side development in any way at all, chances are that you’re finding yourself writing more JavaScript now than you have in a long time. If you learned most of your JavaScript back when DHTML was all the rage and before DOM Scripting was in vogue, there have been some big shifts in the way scripts are written. Most of these are in the way event handlers are assigned and functions declared. Both of these changes are driven by the desire to write scripts that are responsible page citizens, both in not tying behaviour to content and in taking care not to conflict with other scripts. I thought it may be useful to look at some of these more responsible approaches to learn how to best write scripts that are independent of the page content and are safely portable between different applications. Event Handling Back in the heady days of Web 1.0, if you wanted to have an object on the page react to something like a click, you would simply go ahead and attach an onclick attribute. This was easy and understandable, but much like the font tag or the style attribute, it has the downside of mixing behaviour or presentation in with our content. As we’re learned with CSS, there are big benefits in keeping those layers separate. Hey, if it works for CSS, it should work for JavaScript too. Just like with CSS, instead of adding an attribute to our element within the document, the more responsible way to do that is to look for the item from your script (like CSS does with a selector) and then assign the behaviour to it. To give an example, take this oldskool onclick use case: <a id="anim-link" href="#" onclick="playAnimation()">Play the animation</a> This could be rewritten by removing the onclick attribute, and instead doing the following from within your JavaScript. document.getElementById('anim-link').onclick = playAnimation; It’s all in the timing Of course, it’s never quite that easy. To be able to attach tha… | 2006 | Drew McLellan | drewmclellan | 2006-12-10T00:00:00+00:00 | https://24ways.org/2006/writing-responsible-javascript/ | code |
| 221 | 221 | “Probably, Maybe, No”: The State of HTML5 Audio | With the hype around HTML5 and CSS3 exceeding levels not seen since 2005’s Ajax era, it’s worth noting that the excitement comes with good reason: the two specifications render many years of feature hacks redundant by replacing them with native features. For fun, consider how many CSS2-based rounded corners hacks you’ve probably glossed over, looking for a magic solution. These days, with CSS3, the magic is border-radius (and perhaps some vendor prefixes) followed by a coffee break. CSS3’s border-radius, box-shadow, text-shadow and gradients, and HTML5’s <canvas>, <audio> and <video> are some of the most anticipated features we’ll see put to creative (ab)use as adoption of the ‘new shiny’ grows. Developers jumping on the cutting edge are using subsets of these features to little detriment, in most cases. The more popular CSS features are design flourishes that can degrade nicely, but the current audio and video implementations in particular suffer from a number of annoyances. The new shiny: how we got here Sound involves one of the five senses, a key part of daily life for most – and yet it has been strangely absent from HTML and much of the web by default. From a simplistic perspective, it seems odd that HTML did not include support for the full multimedia experience earlier, despite the CD-ROM-based craze of the early 1990s. In truth, standards like HTML can take much longer to bake, but eventually deliver the promise of a lowered barrier to entry, consistent implementations and shiny new features now possible ‘for free’ just about everywhere. <img> was introduced early and naturally to HTML, despite having some opponents at the time. Perhaps <audio> and <video> were avoided, given the added technical complexity of decoding various multi-frame formats, plus the hardware and bandwidth limitations of the era. Perhaps there were quarrels about choosing a standard format or – more simply – maybe these elements just weren’t considered to be applicable to the HTML-based web at the time. In any event, browser plug… | 2010 | Scott Schiller | scottschiller | 2010-12-08T00:00:00+00:00 | https://24ways.org/2010/the-state-of-html5-audio/ | code |
| 30 | 30 | Making Sites More Responsive, Responsibly | With digital projects we’re used to shifting our thinking to align with our target audience. We may undertake research, create personas, identify key tasks, or observe usage patterns, with our findings helping to refine our ongoing creations. A product’s overall experience can make or break its success, and when it comes to defining these experiences our development choices play a huge role alongside more traditional user-focused activities. The popularisation of responsive web design is a great example of how we are able to shape the web’s direction through using technology to provide better experiences. If we think back to the move from table-based layouts to CSS, initially our clients often didn’t know or care about the difference in these approaches, but we did. Responsive design was similar in this respect – momentum grew through the web industry choosing to use an approach that we felt would give a better experience, and which was more future-friendly. We tend to think of responsive design as a means of displaying content appropriately across a range of devices, but the technology and our implementation of it can facilitate much more. A responsive layout not only helps your content work when the newest smartphone comes out, but it also ensures your layout suitably adapts if a visually impaired user drastically changes the size of the text. The 24 ways site at 400% on a Retina MacBook Pro displays a layout more typically used for small screens. When we think more broadly, we realise that our technical choices and approaches to implementation can have knock-on effects for the greater good, and beyond our initial target audiences. We can make our experiences more responsive to people’s needs, enhancing their usability and accessibility along the way. Being responsibly responsive Of course, when we think about being more responsive, there’s a fine line between creating useful functionality and becoming intrusive and overly complex. In the excellent Responsible Responsive Design, Scott Jehl states that: … | 2014 | Sally Jenkinson | sallyjenkinson | 2014-12-10T00:00:00+00:00 | https://24ways.org/2014/making-sites-more-responsive-responsibly/ | code |
| 89 | 89 | Direction, Distance and Destinations | With all these new smartphones in the hands of lost and confused owners, we need a better way to represent distances and directions to destinations. The immediate examples that jump to mind are augmented reality apps which let you see another world through your phone’s camera. While this is interesting, there is a simpler way: letting people know how far away they are and if they are getting warmer or colder. In the app world, you can easily tap into the phone’s array of sensors such as the GPS and compass, but what people rarely know is that you can do the same with HTML. The native versus web app debate will never subside, but at least we can show you how to replicate some of the functionality progressively in HTML and JavaScript. In this tutorial, we’ll walk through how to create a simple webpage listing distances and directions of a few popular locations around the world. We’ll use JavaScript to access the device’s geolocation API and also attempt to access the compass to get a heading. Both of these APIs are documented, to be included in the W3C geolocation API specification, and can be used on both desktop and mobile devices today. To get started, we need a list of a few locations around the world. I have chosen the highest mountain peak on each continent so you can see a diverse set of distances and directions. Mountain °Latitude °Longitude Kilimanjaro -3.075833 37.353333 Vinson Massif -78.525483 -85.617147 Puncak Jaya -4.078889 137.158333 Everest 27.988056 86.925278 Elbrus 43.355 42.439167 Mount McKinley 63.0695 -151.0074 Aconcagua -32.653431 -70.011083 Source: Wikipedia We can put those into an HTML list to be styled and accessed by JavaScript to create some distance and directions calculations. The next thing we need to do is check to see if the browser and operating system have geolocation support. To do this we test to see if the function is available or not using a si… | 2012 | Brian Suda | briansuda | 2012-12-19T00:00:00+00:00 | https://24ways.org/2012/direction-distance-and-destinations/ | code |
| 316 | 316 | Have Your DOM and Script It Too | When working with the XMLHttpRequest object it appears you can only go one of three ways: You can stay true to the colorful moniker du jour and stick strictly to the responseXML property You can play with proprietary – yet widely supported – fire and inject the value of responseText property into the innerHTML of an element of your choosing Or you can be eval() and parse JSON or arbitrary JavaScript delivered via responseText But did you know that there’s a fourth option giving you the best of the latter two worlds? Mint uses this unmentioned approach to grab fresh HTML and run arbitrary JavaScript simultaneously. Without relying on eval(). “But wait-”, you might say, “when would I need to do this?” Besides the example below this technique is handy for things like tab groups that need initialization onload but miss the main onload event handler by a mile thanks to asynchronous scripting. Consider the problem Originally Mint used option 2 to refresh or load new tabs into individual Pepper panes without requiring a full roundtrip to the server. This was all well and good until I introduced the new Client Mode which when enabled allows anyone to view a Mint installation without being logged in. If voyeurs are afoot as Client Mode is disabled, the next time they refresh a pane the entire login page is inserted into the current document. That’s not very helpful so I needed a way to redirect the current document to the login page. Enter the solution Wouldn’t it be cool if browsers interpreted the contents of script tags crammed into innerHTML? Sure, but unfortunately, that just wasn’t meant to be. However like the body element, image elements have an onload event handler. When the image has fully loaded the handler runs the code applied to it. See where I’m going with this? By tacking a tiny image (think single pixel, transparent spacer gif – shudder) onto the end of the HTML returned by our Ajax call, we can smuggle our arbitrary JavaScript into the existing document. The image is added to the DOM, and … | 2005 | Shaun Inman | shauninman | 2005-12-24T00:00:00+00:00 | https://24ways.org/2005/have-your-dom-and-script-it-too/ | code |
| 334 | 334 | Transitional vs. Strict Markup | When promoting web standards, standardistas often talk about XHTML as being more strict than HTML. In a sense it is, since it requires that all elements are properly closed and that attribute values are quoted. But there are two flavours of XHTML 1.0 (three if you count the Frameset DOCTYPE, which is outside the scope of this article), defined by the Transitional and Strict DOCTYPEs. And HTML 4.01 also comes in those flavours. The names reveal what they are about: Transitional DOCTYPEs are meant for those making the transition from older markup to modern ways. Strict DOCTYPEs are actually the default – the way HTML 4.01 and XHTML 1.0 were constructed to be used. A Transitional DOCTYPE may be used when you have a lot of legacy markup that cannot easily be converted to comply with a Strict DOCTYPE. But Strict is what you should be aiming for. It encourages, and in some cases enforces, the separation of structure and presentation, moving the presentational aspects from markup to CSS. From the HTML 4 Document Type Definition: This is HTML 4.01 Strict DTD, which excludes the presentation attributes and elements that W3C expects to phase out as support for style sheets matures. Authors should use the Strict DTD when possible, but may use the Transitional DTD when support for presentation attribute and elements is required. An additional benefit of using a Strict DOCTYPE is that doing so will ensure that browsers use their strictest, most standards compliant rendering modes. Tommy Olsson provides a good summary of the benefits of using Strict over Transitional in Ten questions for Tommy Olsson at Web Standards Group: In my opinion, using a Strict DTD, either HTML 4.01 Strict or XHTML 1.0 Strict, is far more important for the quality of the future web than whether or not there is an X in front of the name. The Strict DTD promotes a separation of structure and presentation, which makes a site so much easier to maintain. For those looking to start using web standards and valid, semantic markup, it is important… | 2005 | Roger Johansson | rogerjohansson | 2005-12-13T00:00:00+00:00 | https://24ways.org/2005/transitional-vs-strict-markup/ | code |
| 181 | 181 | Working With RGBA Colour | When Tim and I were discussing the redesign of this site last year, one of the clear goals was to have a graphical style without making the pages heavy with a lot of images. When we launched, a lot of people were surprised that the design wasn’t built with PNGs. Instead we’d used RGBA colour values, which is part of the CSS3 specification. What is RGBA Colour? We’re all familiar with specifying colours in CSS using by defining the mix of red, green and blue light required to achieve our tone. This is fine and dandy, but whatever values we specify have one thing in common — the colours are all solid, flat, and well, a bit boring. Flat RGB colours CSS3 introduces a couple of new ways to specify colours, and one of those is RGBA. The A stands for Alpha, which refers to the level of opacity of the colour, or to put it another way, the amount of transparency. This means that we can set not only the red, green and blue values, but also control how much of what’s behind the colour shows through. Like with layers in Photoshop. Don’t We Have Opacity Already? The ability to set the opacity on a colour differs subtly from setting the opacity on an element using the CSS opacity property. Let’s look at an example. Here we have an H1 with foreground and background colours set against a page with a patterned background. Heading with no transparency applied h1 { color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); } By setting the CSS opacity property, we can adjust the transparency of the entire element and its contents: Heading with 50% opacity on the element h1 { color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); opacity: 0.5; } RGBA colour gives us something different – the ability to control the opacity of the individual colours rather than the entire element. So we can set the opacity on just the background: 50% opacity on just the background colour h1 { color: rgb(0, 0, 0); background-color: rgba(255, 255, 255, 0.5); } Or leave the background solid and change the opacity on just th… | 2009 | Drew McLellan | drewmclellan | 2009-12-01T00:00:00+00:00 | https://24ways.org/2009/working-with-rgba-colour/ | code |
| 300 | 300 | Taking Device Orientation for a Spin | When The Police sang “Don’t Stand So Close To Me” they weren’t talking about using a smartphone to view a panoramic image on Facebook, but they could have been. For years, technology has driven relentlessly towards devices we can carry around in our pockets, and now that we’re there, we’re expected to take the thing out of our pocket and wave it around in front of our faces like a psychotic donkey in search of its own dangly carrot. But if you can’t beat them, join them. A brave new world A couple of years back all sorts of specs for new HTML5 APIs sprang up much to our collective glee. Emboldened, we ran a few tests and found they basically didn’t work in anything and went off disheartened into the corner for a bit of a sob. Turns out, while we were all busy boohooing, those browser boffins have actually being doing some work, and lo and behold, some of these APIs are even half usable. Mostly literally half usable—we’re still talking about browsers, after all. Now, of course they’re all a bit JavaScripty and are going to involve complex methods and maths and science and probably about a thousand dependancies from Github that will fall out of fashion while we’re still trying to locate the documentation, right? Well, no! So what if we actually wanted to use one of these APIs, say to impress our friends with our ability to make them wave their phones in front of their faces (because no one enjoys looking hapless more than the easily-technologically-impressed), how could we do something like that? Let’s find out. The Device Orientation API The phone-wavy API is more formally known as the DeviceOrientation Event Specification. It does a bunch of stuff that basically doesn’t work, but also gives us three values that represent orientation of a device (a phone, a tablet, probably not a desktop computer) around its x, y and z axes. You might think of it as pitch, roll and yaw if you like to spend your weekends wearing goggles and a leather hat. The main way we access these values is through an event listener, which can … | 2016 | Drew McLellan | drewmclellan | 2016-12-24T00:00:00+00:00 | https://24ways.org/2016/taking-device-orientation-for-a-spin/ | code |
| 235 | 235 | Real Animation Using JavaScript, CSS3, and HTML5 Video | When I was in school to be a 3-D animator, I read a book called Timing for Animation. Though only 152 pages long, it’s essentially the bible for anyone looking to be a great animator. In fact, Pixar chief creative officer John Lasseter used the first edition as a reference when he was an animator at Walt Disney Studios in the early 1980s. In the book, authors John Halas and Harold Whitaker advise: Timing is the part of animation which gives meaning to movement. Movement can easily be achieved by drawing the same thing in two different positions and inserting a number of other drawings between the two. The result on the screen will be movement; but it will not be animation. But that’s exactly what we’re doing with CSS3 and JavaScript: we’re moving elements, not animating them. We’re constantly specifying beginning and end states and allowing the technology to interpolate between the two. And yet, it’s the nuances within those middle frames that create the sense of life we’re looking for. As bandwidth increases and browser rendering grows more consistent, we can create interactions in different ways than we’ve been able to before. We’re encountering motion more and more on sites we’d generally label ‘static.’ However, this motion is mostly just movement, not animation. It’s the manipulation of an element’s properties, most commonly width, height, x- and y-coordinates, and opacity. So how do we create real animation? The metaphor In my experience, animation is most believable when it simulates, exaggerates, or defies the real world. A bowling ball falls differently than a racquetball. They each have different weights and sizes, which affect the way they land, bounce, and impact other objects. This is a major reason that JavaScript animation frequently feels mechanical; it doesn’t complete a metaphor. Expanding and collapsing a <div> feels very different than a opening a door or unfolding a piece of paper, but it often shouldn’t. The interaction itself should tie directly to the art direction of a page. P… | 2010 | Dan Mall | danmall | 2010-12-15T00:00:00+00:00 | https://24ways.org/2010/real-animation-using-javascript-css3-and-html5-video/ | code |
| 71 | 71 | Upping Your Web Security Game | When I started working in web security fifteen years ago, web development looked very different. The few non-static web applications were built using a waterfall process and shipped quarterly at best, making it possible to add security audits before every release; applications were deployed exclusively on in-house servers, allowing Info Sec to inspect their configuration and setup; and the few third-party components used came from a small set of well-known and trusted providers. And yet, even with these favourable conditions, security teams were quickly overwhelmed and called for developers to build security in. If the web security game was hard to win before, it’s doomed to fail now. In today’s web development, every other page is an application, accepting inputs and private data from users; software is built continuously, designed to eliminate manual gates, including security gates; infrastructure is code, with servers spawned with little effort and even less security scrutiny; and most of the code in a typical application is third-party code, pulled in through open source repositories with rarely a glance at who provided them. Security teams, when they exist at all, cannot solve this problem. They are vastly outnumbered by developers, and cannot keep up with the application’s pace of change. For us to have a shot at making the web secure, we must bring security into the core. We need to give it no less attention than that we give browser compatibility, mobile design or web page load times. More broadly, we should see security as an aspect of quality, expecting both ourselves and our peers to address it, and taking pride when we do it well. Where To Start? Embracing security isn’t something you do overnight. A good place to start is by reviewing things you’re already doing – and trying to make them more secure. Here are three concrete steps you can take to get going. HTTPS Threats begin when your system interacts with the outside world, which often means HTTP. As is, HTTP is painfully insecure, allowing attacke… | 2015 | Guy Podjarny | guypodjarny | 2015-12-11T00:00:00+00:00 | https://24ways.org/2015/upping-your-web-security-game/ | code |
| 256 | 256 | Develop Your Naturalist Superpowers with Observable Notebooks and iNaturalist | We’re going to level up your knowledge of what animals you might see in an area at a particular time of year - a skill every naturalist* strives for - using technology! Using iNaturalist and Observable Notebooks we’re going to prototype seasonality graphs for particular species in an area, and automatically create a guide to what animals you might see in each month. *(a Naturalist is someone who likes learning about nature, not someone who’s a fan of being naked, that’s a ‘Naturist’… different thing!) Looking for critters in rocky intertidal habitats One of my favourite things to do is going rockpooling, or as we call it over here in California, ‘tidepooling’. Amounting to the same thing, it’s going to a beach that has rocks where the tide covers then uncovers little pools of water at different times of the day. All sorts of fun creatures and life can be found in this ‘rocky intertidal habitat’ A particularly exciting creature that lives here is the Nudibranch, a type of super colourful ‘sea slug’. There are over 3000 species of Nudibranch worldwide. (The word “nudibranch” comes from the Latin nudus, naked, and the Greek βρανχια / brankhia, gills.) They are however quite tricky to find! Even though they are often brightly coloured and interestingly shaped, some of them are very small, and in our part of the world in the Bay Area in California their appearance in our rockpools is seasonal. We see them more often in Summer months, despite the not-as-low tides as in our Winter and Spring seasons. My favourite place to go tidepooling here is Pillar Point in Half Moon bay (at other times of the year more famously known for the surf competition ‘Mavericks’). The rockpools there are rich in species diversity, of varied types and water-coverage habitat zones as well as being relatively accessible. I was rockpooling at Pillar Point recently with my parents and we talked to a lady who remarked that she hadn’t seen any Nudibranchs on her visit this time. I realised that having an idea of what species to find where, a… | 2018 | Natalie Downe | nataliedowne | 2018-12-18T00:00:00+00:00 | https://24ways.org/2018/observable-notebooks-and-inaturalist/ | code |
| 239 | 239 | Using the WebFont Loader to Make Browsers Behave the Same | Web fonts give us designers a whole new typographic palette with which to work. However, browsers handle the loading of web fonts in different ways, and this can lead to inconsistent user experiences. Safari, Chrome and Internet Explorer leave a blank space in place of the styled text while the web font is loading. Opera and Firefox show text with the default font which switches over when the web font has loaded, resulting in the so-called Flash of Unstyled Text (aka FOUT). Some people prefer Safari’s approach as it eliminates FOUT, others think the Firefox way is more appropriate as content can be read whilst fonts download. Whatever your preference, the WebFont Loader can make all browsers behave the same way. The WebFont Loader is a JavaScript library that gives you extra control over font loading. It was co-developed by Google and Typekit, and released as open source. The WebFont Loader works with most web font services as well as with self-hosted fonts. The WebFont Loader tells you when the following events happen as a browser downloads web fonts (or loads them from cache): when fonts start to download (‘loading’) when fonts finish loading (‘active’) if fonts fail to load (‘inactive’) If your web page requires more than one font, the WebFont Loader will trigger events for individual fonts, and for all the fonts as a whole. This means you can find out when any single font has loaded, and when all the fonts have loaded (or failed to do so). The WebFont Loader notifies you of these events in two ways: by applying special CSS classes when each event happens; and by firing JavaScript events. For our purposes, we’ll be using just the CSS classes. Implementing the WebFont Loader As stated above, the WebFont Loader works with most web font services as well as with self-hosted fonts. Self-hosted fonts To use the WebFont Loader when you are hosting the font files on your own server, paste the following code into your web page: <script type="text/javascript"> WebFontConfig = { custom: { families: ['Fon… | 2010 | Richard Rutter | richardrutter | 2010-12-02T00:00:00+00:00 | https://24ways.org/2010/using-the-webfont-loader-to-make-browsers-behave-the-same/ | code |
| 335 | 335 | Naughty or Nice? CSS Background Images | Web Standards based development involves many things – using semantically sound HTML to provide structure to our documents or web applications, using CSS for presentation and layout, using JavaScript responsibly, and of course, ensuring that all that we do is accessible and interoperable to as many people and user agents as we can. This we understand to be good. And it is good. Except when we don’t clearly think through the full implications of using those techniques. Which often happens when time is short and we need to get things done. Here are some naughty examples of CSS background images with their nicer, more accessible counterparts. Transaction related messages I’m as guilty of this as others (or, perhaps, I’m the only one that has done this, in which case this can serve as my holiday season confessional) We use lovely little icons to show status messages for a transaction to indicate if the action was successful, or was there a warning or error? For example: “Your postal/zip code was not in the correct format.” Notice that we place a nice little icon there, and use background colours and borders to convey a specific message: there was a problem that needs to be fixed. Notice that all of this visual information is now contained in the CSS rules for that div: <div class="error"> <p>Your postal/zip code was not in the correct format.</p> </div> div.error { background: #ffcccc url(../images/error_small.png) no-repeat 5px 4px; color: #900; border-top: 1px solid #c00; border-bottom: 1px solid #c00; padding: 0.25em 0.5em 0.25em 2.5em; font-weight: bold; } Using this approach also makes it very easy to create a div.success and div.warning CSS rules meaning we have less to change in our HTML. Nice, right? No. Naughty. Visual design communicates The CSS is being used to convey very specific information. The choice of icon, the choice of background colour and borders tell us visually that there is something wrong. With the icon as a background image – there… | 2005 | Derek Featherstone | derekfeatherstone | 2005-12-20T00:00:00+00:00 | https://24ways.org/2005/naughty-or-nice-css-background-images/ | code |
| 293 | 293 | A Favor for Your Future Self | We tend to think about the future when we build things. What might we want to be able to add later? How can we refactor this down the road? Will this be easy to maintain in six months, a year, two years? As best we can, we try to think about the what-ifs, and build our websites, systems, and applications with this lens. We comment our code to explain what we knew at the time and how that impacted how we built something. We add to-dos to the things we want to change. These are all great things! Whether or not we come back to those to-dos, refactor that one thing, or add new features, we put in a bit of effort up front just in case to give us a bit of safety later. I want to talk about a situation that Past Alicia and Team couldn’t even foresee or plan for. Recently, the startup I was a part of had to remove large sections of our website. Not just content, but entire pages and functionality. It wasn’t a very pleasant experience, not only for the reason why we had to remove so much of what we had built, but also because it’s the ultimate “I really hope this doesn’t break something else” situation. It was a stressful and tedious effort of triple checking that the things we were removing weren’t dependencies elsewhere. To be honest, we wouldn’t have been able to do this with any amount of success or confidence without our test suite. Writing tests for code is one of those things that developers really, really don’t want to do. It’s one of the easiest things to cut in the development process, and there’s often a struggle to have developers start writing tests in the first place. One of the best lessons the web has taught us is that we can’t, in good faith, trust the happy path. We must make sure ourselves, and our users, aren’t in a tough spot later on because we only thought of the best case scenarios. JavaScript Regardless of your opinion on whether or not everything needs to be built primarily with JavaScript, if you’re choosing to build a JavaScript heavy app, you absolutely should be writing some combination of u… | 2016 | Alicia Sedlock | aliciasedlock | 2016-12-03T00:00:00+00:00 | https://24ways.org/2016/a-favor-for-your-future-self/ | code |
| 135 | 135 | A Scripting Carol | We all know the stories of the Ghost of Scripting Past – a time when the web was young and littered with nefarious scripting, designed to bestow ultimate control upon the developer, to pollute markup with event handler after event handler, and to entrench advertising in the minds of all that gazed upon her. And so it came to be that JavaScript became a dirty word, thrown out of solutions by many a Scrooge without regard to the enhancements that JavaScript could bring to any web page. JavaScript, as it was, was dead as a door-nail. With the arrival of our core philosophy that all standardistas hold to be true: “separate your concerns – content, presentation and behaviour,” we are in a new era of responsible development the Web Standards Way™. Or are we? Have we learned from the Ghosts of Scripting Past? Or are we now faced with new problems that come with new ways of implementing our solutions? The Ghost of Scripting Past If the Ghost of Scripting Past were with us it would probably say: You must remember your roots and where you came from, and realize the misguided nature of your early attempts for control. That person you see down there, is real and they are the reason you exist in the first place… without them, you are nothing. In many ways we’ve moved beyond the era of control and we do take into account the user, or at least much more so than we used to. Sadly – there is one advantage that old school inline event handlers had where we assigned and reassigned CSS style property values on the fly – we knew that if JavaScript wasn’t supported, the styles wouldn’t be added because we ended up doing them at the same time. If anything, we need to have learned from the past that just because it works for us doesn’t mean it is going to work for anyone else – we need to test more scenarios than ever to observe the multitude of browsing arrangements we’ll observe: CSS on with JavaScript off, CSS off/overridden with JavaScript on, both on, both off/not supported. It is a situation that is ripe for conflict. … | 2006 | Derek Featherstone | derekfeatherstone | 2006-12-21T00:00:00+00:00 | https://24ways.org/2006/a-scripting-carol/ | code |
| 264 | 264 | Dynamic Social Sharing Images | Way back when social media was new, you could be pretty sure that whatever you posted would be read by those who follow you. If you’d written a blog post and you wanted to share it with those who follow you, you could post a link and your followers would see it in their streams. Oh heady days! With so many social channels and a proliferation of content and promotions flying past in everyone’s streams, it’s no longer enough to share content on social media, you have to actively sell it if you want it to be seen. You really need to make the most of every opportunity to catch a reader’s attention if you’re trying to get as many eyes as possible on that sweet, sweet social content. One of the best ways to grab attention with your posts or tweets is to include an image. There’s heaps of research that says that having images in your posts helps them stand out to followers. Reports I found showed figures from anything from 35% to 150% improvement from just having image in a post. Unfortunately, the details were surrounded with gross words like engagement and visual marketing assets and so I had to close the page before I started to hate myself too much. So without hard stats to quote, we’ll call it a rule of thumb. The rule of thumb is that posts with images will grab more attention than those without, so it makes sense that when adding pages to a website, you should make sure that they have social media sharing images associated with them. Adding sharing images The process for declaring an image to be used in places like Facebook and Twitter is very simple, and at this point is familiar to many of us. You add a meta tag to the head of the page to point to the location of the image to use. When a link to the page is added to a post, the social network will fetch the page, look for the meta tag and then use the image you specified. <meta property="og:image" content="https://example.com/my_image.jpg"> There’s a good post on this over at CSS-Tricks if you need to bone up on the details of this and other similar meta tags … | 2018 | Drew McLellan | drewmclellan | 2018-12-24T00:00:00+00:00 | https://24ways.org/2018/dynamic-social-sharing-images/ | code |
| 80 | 80 | HTML5 Video Bumpers | Video is a bigger part of the web experience than ever before. With native browser support for HTML5 video elements freeing us from the tyranny of plugins, and the availability of faster internet connections to the workplace, home and mobile networks, it’s now pretty straightforward to publish video in a way that can be consumed in all sorts of ways on all sorts of different web devices. I recently worked on a project where the client had shot some dedicated video shorts to publish on their site. They also had some five-second motion graphics produced to top and tail the videos with context and branding. This pretty common requirement is a great idea on the web, where a user might land at your video having followed a link and be viewing a page without much context. Known as bumpers, these short introduction clips help brand a video and make it look a lot more professional. Adding bumpers to a video The simplest way to add bumpers to a video would be to edit them on to the start and end of the video file itself. Cooking the bumpers into the video file is easy, but should you ever want to update them it can become a real headache. If the branding needs updating, for example, you’d need to re-edit and re-encode all your videos. Not a fun task. What if the bumpers could be added dynamically? That would enable you to use the same bumper for multiple videos (decreasing download time for users who might watch more than one) and to update the bumpers whenever you wanted. You could change them seasonally, update them for special promotions, run different advertising slots, perform multivariate testing, or even target different bumpers to different users. The trade-off, of course, is that if you dynamically add your bumpers, there’s a chance that a user in a given circumstance might not see the bumper. For example, if the main video feature was uploaded to YouTube, you’d have no way to control the playback. As always, you need to weigh up the pros and cons and make your choice. HTML5 bumpers If you wanted to dyna… | 2012 | Drew McLellan | drewmclellan | 2012-12-01T00:00:00+00:00 | https://24ways.org/2012/html5-video-bumpers/ | code |
| 288 | 288 | Displaying Icons with Fonts and Data- Attributes | Traditionally, bitmap formats such as PNG have been the standard way of delivering iconography on websites. They’re quick and easy, and it also ensures they’re as pixel crisp as possible. Bitmaps have two drawbacks, however: multiple HTTP requests, affecting the page’s loading performance; and a lack of scalability, noticeable when the page is zoomed or viewed on a screen with a high pixel density, such as the iPhone 4 and 4S. The requests problem is normally solved by using CSS sprites, combining the icon set into one (physically) large image file and showing the relevant portion via background-position. While this works well, it can get a bit fiddly to specify all the positions. In particular, scalability is still an issue. A vector-based format such as SVG sounds ideal to solve this, but browser support is still patchy. The rise and adoption of web fonts have given us another alternative. By their very nature, they’re not only scalable, but resolution-independent too. No need to specify higher resolution graphics for high resolution screens! That’s not all though: Browser support: Unlike a lot of new shiny techniques, they have been supported by Internet Explorer since version 4, and, of course, by all modern browsers. We do need several different formats, however! Design on the fly: The font contains the basic graphic, which can then be coloured easily with CSS – changing colours for themes or :hover and :focus styles is done with one line of CSS, rather than requiring a new graphic. You can also use CSS3 properties such as text-shadow to add further effects. Using -webkit-background-clip: text;, it’s possible to use gradient and inset shadow effects, although this creates a bitmap mask which spoils the scalability. Small file size: specially designed icon fonts, such as Drew Wilson’s Pictos font, can be as little as 12Kb for the .woff font. This is because they contain fewer characters than a fully fledged font. You can see Pictos being used in the wild on sites like Garrett Murray’s Maniacal Rage… | 2011 | Jon Hicks | jonhicks | 2011-12-12T00:00:00+00:00 | https://24ways.org/2011/displaying-icons-with-fonts-and-data-attributes/ | code |
| 68 | 68 | Grid, Flexbox, Box Alignment: Our New System for Layout | Three years ago for 24 ways 2012, I wrote an article about a new CSS layout method I was excited about. A specification had emerged, developed by people from the Internet Explorer team, bringing us a proper grid system for the web. In 2015, that Internet Explorer implementation is still the only public implementation of CSS grid layout. However, in 2016 we should be seeing it in a new improved form ready for our use in browsers. Grid layout has developed hidden behind a flag in Blink, and in nightly builds of WebKit and, latterly, Firefox. By being developed in this way, breaking changes could be safely made to the specification as no one was relying on the experimental implementations in production work. Another new layout method has emerged over the past few years in a more public and perhaps more painful way. Shipped prefixed in browsers, The flexible box layout module (flexbox) was far too tempting for developers not to use on production sites. Therefore, as changes were made to the specification, we found ourselves with three different flexboxes, and browser implementations that did not match one another in completeness or in the version of specified features they supported. Owing to the different ways these modules have come into being, when I present on grid layout it is often the very first time someone has heard of the specification. A question I keep being asked is whether CSS grid layout and flexbox are competing layout systems, as though it might be possible to back the loser in a CSS layout competition. The reality, however, is that these two methods will sit together as one system for doing layout on the web, each method playing to certain strengths and serving particular layout tasks. If there is to be a loser in the battle of the layouts, my hope is that it will be the layout frameworks that tie our design to our markup. They have been a necessary placeholder while we waited for a true web layout system, but I believe that in a few years time we’ll be easily able to date a website to circa 2015 … | 2015 | Rachel Andrew | rachelandrew | 2015-12-15T00:00:00+00:00 | https://24ways.org/2015/grid-flexbox-box-alignment-our-new-system-for-layout/ | code |
| 52 | 52 | Git Rebasing: An Elfin Workshop Workflow | This year Santa’s helpers have been tasked with making a garland. It’s a pretty simple task: string beads onto yarn in a specific order. When the garland reaches a specific length, add it to the main workshop garland. Each elf has a specific sequence they’re supposed to chain, which is given to them via a work order. (This is starting to sound like one of those horrible calculus problems. I promise it isn’t. It’s worse; it’s about Git.) For the most part, the system works really well. The elves are able to quickly build up a shared chain because each elf specialises on their own bit of garland, and then links the garland together. Because of this they’re able to work independently, but towards the common goal of making a beautiful garland. At first the elves are really careful with each bead they put onto the garland. They check with one another before merging their work, and review each new link carefully. As time crunches on, the elves pour a little more cheer into the eggnog cooler, and the quality of work starts to degrade. Tensions rise as mistakes are made and unkind words are said. The elves quickly realise they’re going to need a system to change the beads out when mistakes are made in the chain. The first common mistake is not looking to see what the latest chain is that’s been added to the main garland. The garland is huge, and it sits on a roll in one of the corners of the workshop. It’s a big workshop, so it is incredibly impractical to walk all the way to the roll to check what the last link is on the chain. The elves, being magical, have set up a monitoring system that allows them to keep a local copy of the main garland at their workstation. It’s an imperfect system though, so the elves have to request a manual refresh to see the latest copy. They can request a new copy by running the command git pull --rebase=preserve (They found that if they ran git pull on its own, they ended up with weird loops of extra beads off the main garland, so they’ve opted to use this method.) This keeps the shared garl… | 2015 | Emma Jane Westby | emmajanewestby | 2015-12-07T00:00:00+00:00 | https://24ways.org/2015/git-rebasing/ | code |
| 295 | 295 | Internet of Stranger Things | This year I’ve been running a workshop about using JavaScript and Node.js to work with all different kinds of electronics on the Raspberry Pi. So especially for 24 ways I’m going to show you how I made a very special Raspberry Pi based internet connected project! And nothing says Christmas quite like a set of fairy lights connected to another dimension1. What you’ll see You can rig up the fairy lights in your home, with the scrawly letters written under each one. The people from the other side (i.e. the internet) will be able to write messages to you from their browser in real time. In fact why not try it now; check this web page. When you click the lights in your browser, my lights (and yours) will turn on and off in real life! (There may be a queue if there are lots of people accessing it, hit the “Send a message” button and wait your turn.) It’s all done with JavaScript, using Node.js running on both the Raspberry Pi and on the server. I’m using WebSockets to communicate in real time between the browser, server and Raspberry Pi. What you’ll need Raspberry Pi any of the following models: Zero (will need straight male header pins soldered2 and Micro USB OTG adaptor), A+, B+, 2, or 3 Micro SD card at least 4Gb Class 10 speed3 Micro USB power supply at least 2A USB Wifi dongle (unless you have a Pi 3 - that has wifi built in). Addressable fairy lights Logic level shifter (with pins soldered unless you want to do it!) Breadboard Jumper wires (3x male to male and 4x female to male) Optional but recommended Base board to hold the Pi and Breadboard (often comes with a breadboard!) Find links for where to buy all of these items that goes along with this tutorial. The total price should be around $1004. Setting up the Raspberry Pi You’ll need to install the SD card for the Raspberry Pi. You’ll find a link to download a disk image on the support document, ready-made with the Raspbian version of Linux, along with Node.js and all the files you need. Download it and write it to the SD card using the fantastic free … | 2016 | Seb Lee-Delisle | sebleedelisle | 2016-12-01T00:00:00+00:00 | https://24ways.org/2016/internet-of-stranger-things/ | code |
| 314 | 314 | Easy Ajax with Prototype | There’s little more impressive on the web today than a appropriate touch of Ajax. Used well, Ajax brings a web interface much closer to the experience of a desktop app, and can turn a bear of an task into a pleasurable activity. But it’s really hard, right? It involves all the nasty JavaScript that no one ever does often enough to get really good at, and the browser support is patchy, and urgh it’s just so much damn effort. Well, the good news is that – ta-da – it doesn’t have to be a headache. But man does it still look impressive. Here’s how to amaze your friends. Introducing prototype.js Prototype is a JavaScript framework by Sam Stephenson designed to help make developing dynamic web apps a whole lot easier. In basic terms, it’s a JavaScript file which you link into your page that then enables you to do cool stuff. There’s loads of capability built in, a portion of which covers our beloved Ajax. The whole thing is freely distributable under an MIT-style license, so it’s good to go. What a nice man that Mr Stephenson is – friends, let us raise a hearty cup of mulled wine to his good name. Cheers! sluurrrrp. First step is to download the latest Prototype and put it somewhere safe. I suggest underneath the Christmas tree. Cutting to the chase Before I go on and set up an example of how to use this, let’s just get to the crux. Here’s how Prototype enables you to make a simple Ajax call and dump the results back to the page: var url = 'myscript.php'; var pars = 'foo=bar'; var target = 'output-div'; var myAjax = new Ajax.Updater(target, url, {method: 'get', parameters: pars}); This snippet of JavaScript does a GET to myscript.php, with the parameter foo=bar, and when a result is returned, it places it inside the element with the ID output-div on your page. Knocking up a basic example So to get this show on the road, there are three files we need to set up in our site alongside prototype.js. Obviously we need a basic HTML page with prototype.js linked in. This is the page the user interacts with. Secondl… | 2005 | Drew McLellan | drewmclellan | 2005-12-01T00:00:00+00:00 | https://24ways.org/2005/easy-ajax-with-prototype/ | code |
| 216 | 216 | Styling Components - Typed CSS With Stylable | There’s been a lot of debate recently about how best to style components for web apps so that styles don’t accidentally ‘leak’ out of the component they’re meant for, or clash with other styles on the page. Elaborate CSS conventions have sprung up, such as OOCSS, SMACSS, BEM, ITCSS, and ECSS. These work well, but they are methodologies, and require everyone in the team to know them and follow them, which can be a difficult undertaking across large or distributed teams. Others just give up on CSS and put all their styles in JavaScript. Now, I’m not bashing JS, especially so close to its 22nd birthday, but CSS-in-JS has problems of its own. Browsers have 20 years experience in optimising their CSS engines, so JavaScript won’t be as fast as using real CSS, and in any case, this requires waiting for JS to download, parse, execute then render the styles. There’s another problem with CSS-in-JS, too. Since Responsive Web Design hit the streets, most designers no longer make comps in Photoshop or its equivalents; instead, they write CSS. Why hire an expensive design professional and require them to learn a new way of doing their job? A recent thread on Twitter asked “What’s your biggest gripe with CSS-in-JS?”, and the replies were illuminating: “Always having to remember to camelCase properties then spending 10min pulling hair out when you do forget”, “the cryptic domain-specific languages that each of the frameworks do just ever so slightly differently”, “When I test look and feel in browser, then I copy paste from inspector, only to have to re-write it as a JSON object”, “Lack of linting, autocomplete, and css plug-ins for colors/ incrementing/ etc”. If you’re a developer, and you’re still unconvinced, I challenge you to let designers change the font in your IDE to Zapf Chancery and choose a new colour scheme, simply because they like it better. Does that sound like fun? Will that boost your productivity? Thought not. Some chums at Wix Engineering and I wanted to see if we could square this circle. Wix-hosted sites h… | 2017 | Bruce Lawson | brucelawson | 2017-12-09T00:00:00+00:00 | https://24ways.org/2017/styling-components-typed-css-with-stylable/ | code |
| 36 | 36 | Naming Things | There are only two hard things in computer science: cache invalidation and naming things. Phil Karlton Being a professional web developer means taking responsibility for the code you write and ensuring it is comprehensible to others. Having a documented code style is one means of achieving this, although the size and type of project you’re working on will dictate the conventions used and how rigorously they are enforced. Working in-house may mean working with multiple developers, perhaps in distributed teams, who are all committing changes – possibly to a significant codebase – at the same time. Left unchecked, this codebase can become unwieldy. Coding conventions ensure everyone can contribute, and help build a product that works as a coherent whole. Even on smaller projects, perhaps working within an agency or by yourself, at some point the resulting product will need to be handed over to a third party. It’s sensible, therefore, to ensure that your code can be understood by those who’ll eventually take ownership of it. Put simply, code is read more often than it is written or changed. A consistent and predictable naming scheme can make code easier for other developers to understand, improve and maintain, presumably leaving them free to worry about cache invalidation. Let’s talk about semantics Names not only allow us to identify objects, but they can also help us describe the objects being identified. Semantics (the meaning or interpretation of words) is the cornerstone of standards-based web development. Using appropriate HTML elements allows us to create documents and applications that have implicit structural meaning. Thanks to HTML5, the vocabulary we can choose from has grown even larger. HTML elements provide one level of meaning: a widely accepted description of a document’s underlying structure. It’s only with the mutual agreement of browser vendors and developers that <p> indicates a paragraph. Yet (with the exception of widely accepted microdata and microformat schemas) only HTML elements co… | 2014 | Paul Lloyd | paulrobertlloyd | 2014-12-21T00:00:00+00:00 | https://24ways.org/2014/naming-things/ | code |
| 310 | 310 | Fairytale of new Promise | There are only four good Christmas songs. I know, yeah, JavaScript or whatever. We’ll get to that in a minute, I promise. First—and I cannot stress this enough— there are four good Christmas songs. You’re free to disagree with me here, of course, but please try to understand that you will be wrong. They don’t all have the most safe-for-work titles; I can’t list all of them here, but if you choose to let your fingers do the walkin’ to your nearest search engine, I will say that one was released by the band FEAR way back in 1982 and one was on Run the Jewels’ self-titled debut album. The lyrics are a hell of a lot worse than the titles, so maybe wait until you get home from work before you queue them up. Wear headphones, if you’ve got thin walls. For my money, though, the two I can reference by name are the top of that small heap: Tom Waits’ Christmas Card from a Hooker in Minneapolis, and The Pogues’ Fairytale of New York. The former once held the honor of being the only good Christmas song—about which which I was also unequivocally correct, right up until I changed my mind. It’s not the song up for discussion today, but feel free to familiarize yourself just the same—I’ll wait. Fairytale of New York—the top of the list—starts out by hinting at some pretty standard holiday fare; dreams and cheer and whatnot. Typical seasonal stuff, so long as you ignore that the story seems to be recounted as a drunken flashback in a jail cell. You can probably make a few guesses at the underlying spirit of the song based on that framing: following a lucky break, our bright-eyed protagonists move to New York in search of fame and fortune, only to quickly descend into bad decisions, name-calling, and vaguely festive chaos. This song speaks to me on a couple of levels, not the least of which is as a retelling of my day-to-day interactions with JavaScript. Each day’s melody might vary a little bit, granted, but the lyrics almost always follow a pretty clear arc toward “PARENTAL ADVISORY: EXPLICIT CONTENT.” You might have heard a simi… | 2016 | Mat Marquis | matmarquis | 2016-12-19T00:00:00+00:00 | https://24ways.org/2016/fairytale-of-new-promise/ | code |
| 241 | 241 | Jank-Free Image Loads | There are a few fundamental problems with embedding images in pages of hypertext; perhaps chief among them is this: text is very light and loads rather fast; images are much heavier and arrive much later. Consequently, millions (billions?) of times a day, a hapless Web surfer will start reading some text on a page, and then — Your browser doesn’t support HTML5 video. Here is a link to the video instead. — oops! — an image pops in above it, pushing said text down the page, and our poor reader loses their place. By default, partially-loaded pages have the user experience of a slippery fish, or spilled jar of jumping beans. For the rest of this article, I shall call that jarring, no-good jumpiness by its name: jank. And I’ll chart a path into a jank-free future – one in which it’s easy and natural to author <img> elements that load like this: Your browser doesn’t support HTML5 video. Here is a link to the video instead. Jank is a very old problem, and there is a very old solution to it: the width and height attributes on <img>. The idea is: if we stick an image’s dimensions right into the HTML, browsers can know those dimensions before the image loads, and reserve some space on the layout for it so that nothing gets bumped down the page when the image finally arrives. width Specifies the intended width of the image in pixels. When given together with the height, this allows user agents to reserve screen space for the image before the image data has arrived over the network. —The HTML 3.2 Specification, published on January 14 1997 Unfortunately for us, when width and height were first spec’d and implemented, layouts were largely fixed and images were usually only intended to render at their fixed, actual dimensions. When image sizing gets fluid, width and height get weird: See the Pen fluid width + fixed height = distortion by Eric Portis (@eeeps) on CodePen. width and height are too rigid for the responsive world. What we need, and have needed for a very long time, is a way to specify fixed aspect ra… | 2018 | Eric Portis | ericportis | 2018-12-21T00:00:00+00:00 | https://24ways.org/2018/jank-free-image-loads/ | code |
| 128 | 128 | Boost Your Hyperlink Power | There are HTML elements and attributes that we use every day. Headings, paragraphs, lists and images are the mainstay of every Web developer’s toolbox. Perhaps the most common tool of all is the anchor. The humble a element is what joins documents together to create the gloriously chaotic collection we call the World Wide Web. Anatomy of an Anchor The power of the anchor element lies in the href attribute, short for hypertext reference. This creates a one-way link to another resource, usually another page on the Web: <a href="http://allinthehead.com/"> The href attribute sits in the opening a tag and some descriptive text sits between the opening and closing tags: <a href="http://allinthehead.com/">Drew McLellan</a> “Whoop-dee-freakin’-doo,” I hear you say, “this is pretty basic stuff” – and you’re quite right. But there’s more to the anchor element than just the href attribute. The Theory of relativity You might be familiar with the rel attribute from the link element. I bet you’ve got something like this in the head of your documents: <link rel="stylesheet" type="text/css" media="screen" href="styles.css" /> The rel attribute describes the relationship between the linked document and the current document. In this case, the value of rel is “stylesheet”. This means that the linked document is the stylesheet for the current document: that’s its relationship. Here’s another common use of rel: <link rel="alternate" type="application/rss+xml" title="my RSS feed" href="index.xml" /> This describes the relationship of the linked file – an RSS feed – as “alternate”: an alternate view of the current document. Both of those examples use the link element but you are free to use the rel attribute in regular hyperlinks. Suppose you’re linking to your RSS feed in the body of your page: Subscribe to <a href="index.xml">my RSS feed</a>. You can add extra information to this anchor using the rel attribute: Subscribe to <a href="index.xml" rel="alternate" type="application/rss+xml">my RSS feed</a>. There’s no p… | 2006 | Jeremy Keith | jeremykeith | 2006-12-18T00:00:00+00:00 | https://24ways.org/2006/boost-your-hyperlink-power/ | code |
| 38 | 38 | Websites of Christmas Past, Present and Future | The websites of Christmas past The first website was created at CERN. It was launched on 20 December 1990 (just in time for Christmas!), and it still works today, after twenty-four years. Isn’t that incredible?! Why does this website still work after all this time? I can think of a few reasons. First, the authors of this document chose HTML. Of course they couldn’t have known back then the extent to which we would be creating documents in HTML, but HTML always had a lot going for it. It’s built on top of plain text, which means it can be opened in any text editor, and it’s pretty readable, even without any parsing. Despite the fact that HTML has changed quite a lot over the past twenty-four years, extensions to the specification have always been implemented in a backwards-compatible manner. Reading through the 1992 W3C document HTML Tags, you’ll see just how it has evolved. We still have h1 – h6 elements, but I’d not heard of the <plaintext> element before. Despite being deprecated since HTML2, it still works in several browsers. You can see it in action on my website. As well as being written in HTML, there is no run-time compilation of code; the first website simply consists of HTML files transmitted over the web. Due to its lack of complexity, it stood a good chance of surviving in the turbulent World Wide Web. That’s all well and good for a simple, static website. But websites created today are increasingly interactive. Many require a login and provide experiences that are tailored to the individual user. This type of dynamic website requires code to be executed somewhere. Traditionally, dynamic websites would execute such code on the server, and transmit a simple HTML file to the user. As far as the browser was concerned, this wasn’t much different from the first website, as the additional complexity all happened before the document was sent to the browser. Doing it all in the browser In 2003, the first single page interface was created at slashdotslash.com. A single page interface or single page ap… | 2014 | Josh Emerson | joshemerson | 2014-12-08T00:00:00+00:00 | https://24ways.org/2014/websites-of-christmas-past-present-and-future/ | code |
| 298 | 298 | First Steps in VR | The web is all around us. As web folk, it is our responsibility to consider the impact our work can have. Part of this includes thinking about the future; the web changes lives and if we are building the web then we are the ones making decisions that affect people in every corner of the world. I find myself often torn between wanting to make the right decisions, and just wanting to have fun. To fiddle and play. We all know how important it is to sometimes just try ideas, whether they will amount to much or not. I think of these two mindsets as production and prototyping, though of course there are lots of overlap and phases in between. I mention this because virtual reality is currently seen as a toy for rich people, and in some ways at the moment it is. But with WebVR we are able to create interesting experiences with a relatively low entry point. I want us to have open minds, play around with things, and then see how we can use the tools we have at our disposal to make things that will help people. Every year we see articles saying it will be the “year of virtual reality”, that was especially prevalent this year. 2016 has been a year of progress, VR isn’t quite mainstream but with efforts like Playstation VR and Google Cardboard, we are definitely seeing much more of it. This year also saw the consumer editions of the Oculus Rift and HTC Vive. So it does seem to be a good time for an overview of how to get involved with creating virtual reality on the web. WebVR is an API for connecting to devices and retrieving continuous data such as the position and orientation. Unlike the Web Audio API and some other APIs, WebVR does not feel like a framework. You use it however you want, taking the data and using it as you wish. To make it easier, there are plenty of resources such as Three.js, A-Frame and ReactVR that help to make the heavy lifting a bit easier. Getting Started with A-Frame I like taking the opportunity to learn new things whenever I can. So while planning this article I thought that instead of trying to… | 2016 | Shane Hudson | shanehudson | 2016-12-11T00:00:00+00:00 | https://24ways.org/2016/first-steps-in-vr/ | code |
| 289 | 289 | Front-End Developers Are Information Architects Too | The theme of this year’s World IA Day was “Information Everywhere, Architects Everywhere”. This article isn’t about what you may consider an information architect to be: someone in the user-experience field, who maybe studied library science, and who talks about taxonomies. This is about a realisation I had a couple of years ago when I started to run an increasing amount of usability-testing sessions with people who have disabilities: that the structure, labelling, and connections that can be made in front-end code is information architecture. People’s ability to be successful online is unequivocally connected to the quality of the code that is written. Places made of information In information architecture we talk about creating places made of information. These places are made of ones and zeros, but we talk about them as physical structures. We talk about going onto a social media platform, posting in blogs, getting locked out of an environment, and building applications. In 2002, Andrew Hinton stated: People live and work in these structures, just as they live and work in their homes, offices, factories and malls. These places are not virtual: they are as real as our own minds. 25 Theses We’re creating structures which people rely on for significant parts of their lives, so it’s critical that we carry out our work responsibly. This means we must use our construction materials correctly. Luckily, our most important material, HTML, has a well-documented specification which tells us how to build robust and accessible places. What is most important, I believe, is to understand the semantics of HTML. Semantics The word “semantic” has its origin in Greek words meaning “significant”, “signify”, and “sign”. In the physical world, a structure can have semantic qualities that tell us something about it. For example, the stunning Westminster Abbey inspires awe and signifies much about the intent and purpose of the structure. The building’s size; the quality of the stone work; the massive, detailed stained glass: these … | 2016 | Francis Storr | francisstorr | 2016-12-17T00:00:00+00:00 | https://24ways.org/2016/front-end-developers-are-information-architects-too/ | code |
| 31 | 31 | Dealing with Emergencies in Git | The stockings were hung by the chimney with care, In hopes that version control soon would be there. This summer I moved to the UK with my partner, and the onslaught of the Christmas holiday season began around the end of October (October!). It does mean that I’ve had more than a fair amount of time to come up with horrible Git analogies for this article. Analogies, metaphors, and comparisons help the learner hook into existing mental models about how a system works. They only help, however, if the learner has enough familiarity with the topic at hand to make the connection between the old and new information. Let’s start by painting an updated version of Clement Clarke Moore’s Christmas living room. Empty stockings are hung up next to the fireplace, waiting for Saint Nicholas to come down the chimney and fill them with small treats. Holiday treats are scattered about. A bowl of mixed nuts, the holiday nutcracker, and a few clementines. A string of coloured lights winds its way up an evergreen. Perhaps a few of these images are familiar, or maybe they’re just settings you’ve seen in a movie. It doesn’t really matter what the living room looks like though. The important thing is to ground yourself in your own experiences before tackling a new subject. Instead of trying to brute-force your way into new information, as an adult learner constantly ask yourself: ‘What is this like? What does this remind me of? What do I already know that I can use to map out this new territory?’ It’s okay if the map isn’t perfect. As you refine your understanding of a new topic, you’ll outgrow the initial metaphors, analogies, and comparisons. With apologies to Mr. Moore, let’s give it a try. Getting Interrupted in Git When on the roof there arose such a clatter! You’re happily working on your software project when all of a sudden there are freaking reindeer on the roof! Whatever you’ve been working on is going to need to wait while you investigate the commotion. If you’ve got even a little bit of experience working with Git, … | 2014 | Emma Jane Westby | emmajanewestby | 2014-12-02T00:00:00+00:00 | https://24ways.org/2014/dealing-with-emergencies-in-git/ | code |
| 192 | 192 | Cleaner Code with CSS3 Selectors | The parts of CSS3 that seem to grab the most column inches on blogs and in articles are the shiny bits. Rounded corners, text shadow and new ways to achieve CSS layouts are all exciting and bring with them all kinds of possibilities for web design. However what really gets me, as a developer, excited is a bit more mundane. In this article I’m going to take a look at some of the ways our front and back-end code will be simplified by CSS3, by looking at the ways we achieve certain visual effects now in comparison to how we will achieve them in a glorious, CSS3-supported future. I’m also going to demonstrate how we can use these selectors now with a little help from JavaScript – which can work out very useful if you find yourself in a situation where you can’t change markup that is being output by some server-side code. The wonder of nth-child So why does nth-child get me so excited? Here is a really common situation, the designer would like the tables in the application to look like this: Setting every other table row to a different colour is a common way to enhance readability of long rows. The tried and tested way to implement this is by adding a class to every other row. If you are writing the markup for your table by hand this is a bit of a nuisance, and if you stick a row in the middle you have to change the rows the class is applied to. If your markup is generated by your content management system then you need to get the server-side code to add that class – if you have access to that code. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Striping every other row - using classes</title> <style type="text/css"> body { padding: 40px; margin: 0; font: 0.9em Arial, Helvetica, sans-serif; } table { border-collapse: collapse; border: 1px solid #124412; width: 600px; } th { border: 1px solid #124412; background-color: #334f33; color: #fff; padding: 0.4em; text-… | 2009 | Rachel Andrew | rachelandrew | 2009-12-20T00:00:00+00:00 | https://24ways.org/2009/cleaner-code-with-css3-selectors/ | code |
| 184 | 184 | Spruce It Up | The landscape of web typography is changing quickly these days. We’ve gone from the wild west days of sIFR to Cufón to finally seeing font embedding seeing wide spread adoption by browser developers (and soon web designers) with @font-face. For those who’ve felt limited by the typographic possibilities before, this has been a good year. As Mark Boulton has so eloquently elucidated, @font-face embedding doesn’t come without its drawbacks. Font files can be quite large and FOUT—that nasty flash of unstyled text—can be a distraction for users. Data URIs We can battle FOUT by using Data URIs. A Data URI allows the font to be encoded right into the CSS file. When the font comes with the CSS, the flash of unstyled text is mitigated. No extra HTTP requests are required. Don’t be a grinch, though. Sending hundreds of kilobytes down the pipe still isn’t great. Sometimes, all we want to do is spruce up our site with a little typographic sugar. Be Selective Dan Cederholm’s SimpleBits is an attractive site. Take a look at the ampersand within the header of his site. It’s the lovely (and free) Goudy Bookletter 1911 available from The League of Movable Type. The Opentype format is a respectable 28KB. Nothing too crazy but hold on here. Mr. Cederholm is only using the ampersand! Ouch. That’s a lot of bandwidth just for one character. Can we optimize a font like we can an image? Yes. Image optimization essentially works by removing unnecessary image data such as colour data, hidden comments or using compression algorithms. How do you remove unnecessary information from a font? Subsetting. If you’re the adventurous type, grab a copy of FontForge, which is an open source font editing tool. You can open the font, view and edit any of the glyphs and then re-generate the font. The interface is a little clunky but you’ll be able to select any character you don’t want and then cut the glyphs. Re-generate your font and you’ve now got a smaller file. There are certainly more optimizations that can also be made such as … | 2009 | Jonathan Snook | jonathansnook | 2009-12-19T00:00:00+00:00 | https://24ways.org/2009/spruce-it-up/ | code |
| 327 | 327 | Improving Form Accessibility with DOM Scripting | The form label element is an incredibly useful little element – it lets you link the form field unquestionably with the descriptive label text that sits alongside or above it. This is a very useful feature for people using screen readers, but there are some problems with this element. What happens if you have one piece of data that, for various reasons (validation, the way your data is collected/stored etc), needs to be collected using several form elements? The classic example is date of birth – ideally, you’ll ask for the date of birth once but you may have three inputs, one each for day, month and year, that you also need to provide hints about the format required. The problem is that to be truly accessible you need to label each field. So you end up needing something to say “this is a date of birth”, “this is the day field”, “this is the month field” and “this is the day field”. Seems like overkill, doesn’t it? And it can uglify a form no end. There are various ways that you can approach it (and I think I’ve seen them all). Some people omit the label and rely on the title attribute to help the user through; others put text in a label but make the text 1 pixel high and merging in to the background so that screen readers can still get that information. The most common method, though, is simply to set the label to not display at all using the CSS display:none property/value pairing (a technique which, for the time being, seems to work on most screen readers). But perhaps we can do more with this? The technique I am suggesting as another alternative is as follows (here comes the pseudo-code): Start with a totally valid and accessible form Ensure that each form input has a label that is linked to its related form control Apply a class to any label that you don’t want to be visible (for example superfluous) Then, through the magic of unobtrusive JavaScript/the DOM, manipulate the page as follows once the page has loaded: Find all the label elements that are marked as superfluous and hide them Find ou… | 2005 | Ian Lloyd | ianlloyd | 2005-12-03T00:00:00+00:00 | https://24ways.org/2005/improving-form-accessibility-with-dom-scripting/ | code |
| 126 | 126 | Intricate Fluid Layouts in Three Easy Steps | The Year of the Script may have drawn attention away from CSS but building fluid, multi-column, cross-browser CSS layouts can still be as unpleasant as a lump of coal. Read on for a worry-free approach in three quick steps. The layout system I developed, YUI Grids CSS, has three components. They can be used together as we’ll see, or independently. The Three Easy Steps Choose fluid or fixed layout, and choose the width (in percents or pixels) of the page. Choose the size, orientation, and source-order of the main and secondary blocks of content. Choose the number of columns and how they distribute (for example 50%-50% or 25%-75%), using stackable and nestable grid structures. The Setup There are two prerequisites: We need to normalize the size of an em and opt into the browser rendering engine’s Strict Mode. Ems are a superior unit of measure for our case because they represent the current font size and grow as the user increases their font size setting. This flexibility—the container growing with the user’s wishes—means larger text doesn’t get crammed into an unresponsive container. We’ll use YUI Fonts CSS to set the base size because it provides consistent-yet-adaptive font-sizes while preserving user control. The second prerequisite is to opt into Strict Mode (more info on rendering modes) by declaring a Doctype complete with URI. You can choose XHTML or HTML, and Transitional or Strict. I prefer HTML 4.01 Strict, which looks like this: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> Including the CSS A single small CSS file powers a nearly-infinite number of layouts thanks to a recursive system and the interplay between the three distinct components. You could prune to a particular layout’s specific needs, but why bother when the complete file weighs scarcely 1.8kb uncompressed? Compressed, YUI Fonts and YUI Grids combine for a miniscule 0.9kb over the wire. You could save an HTTP request by concatenating the two CSS files, or by adding their contents … | 2006 | Nate Koechley | natekoechley | 2006-12-20T00:00:00+00:00 | https://24ways.org/2006/intricate-fluid-layouts/ | code |
| 215 | 215 | Teach the CLI to Talk Back | The CLI is a daunting tool. It’s quick, powerful, but it’s also incredibly easy to screw things up in – either with a mistyped command, or a correctly typed command used at the wrong moment. This puts a lot of people off using it, but it doesn’t have to be this way. If you’ve ever interacted with Slack’s Slackbot to set a reminder or ask a question, you’re basically using a command line interface, but it feels more like having a conversation. (My favourite Slack app is Lunch Train which helps with the thankless task of herding colleagues to a particular lunch venue on time.) Same goes with voice-operated assistants like Alexa, Siri and Google Home. There are even games, like Lifeline, where you interact with a stranded astronaut via pseudo SMS, and KOMRAD where you chat with a Soviet AI. I’m not aiming to build an AI here – my aspirations are a little more down to earth. What I’d like is to make the CLI a friendlier, more forgiving, and more intuitive tool for new or reluctant users. I want to teach it to talk back. Interactive command lines in the wild If you’ve used dev tools in the command line, you’ve probably already used an interactive prompt – something that asks you questions and responds based on your answers. Here are some examples: Yeoman If you have Yeoman globally installed, running yo will start a command prompt. The prompt asks you what you’d like to do, and gives you options with how to proceed. Seasoned users will run specific commands for these options rather than go through this prompt, but it’s a nice way to start someone off with using the tool. npm If you’re a Node.js developer, you’re probably familiar with typing npm init to initialise a project. This brings up prompts that will populate a package.json manifest file for that project. The alternative would be to expect the user to craft their own package.json, which is more error-prone since it’s in JSON format, so something as trivial as an extraneous comma can throw an error. Snyk Snyk is a dev tool that checks for known vulnerabilities… | 2017 | Anna Debenham | annadebenham | 2017-12-11T00:00:00+00:00 | https://24ways.org/2017/teach-the-cli-to-talk-back/ | code |
| 147 | 147 | Christmas Is In The AIR | That’s right, Christmas is coming up fast and there’s plenty of things to do. Get the tree and lights up, get the turkey, buy presents and who know what else. And what about Santa? He’s got a list. I’m pretty sure he’s checking it twice. Sure, we could use an existing list making web site or even a desktop widget. But we’re geeks! What’s the fun in that? Let’s build our own to-do list application and do it with Adobe AIR! What’s Adobe AIR? Adobe AIR, formerly codenamed Apollo, is a runtime environment that runs on both Windows and OSX (with Linux support to follow). This runtime environment lets you build desktop applications using Adobe technologies like Flash and Flex. Oh, and HTML. That’s right, you web standards lovin’ maniac. You can build desktop applications that can run cross-platform using the trio of technologies, HTML, CSS and JavaScript. If you’ve tried developing with AIR before, you’ll need to get re-familiarized with the latest beta release as many things have changed since the last one (such as the API and restrictions within the sandbox.) To get started To get started in building an AIR application, you’ll need two basic things: The AIR runtime. The runtime is needed to run any AIR-based application. The SDK. The software development kit gives you all the pieces to test your application. Unzip the SDK into any folder you wish. You’ll also want to get your hands on the JavaScript API documentation which you’ll no doubt find yourself getting into before too long. (You can download it, too.) Also of interest, some development environments have support for AIR built right in. Aptana doesn’t have support for beta 3 yet but I suspect it’ll be available shortly. Within the SDK, there are two main tools that we’ll use: one to test the application (ADL) and another to build a distributable package of our application (ADT). I’ll get into this some more when we get to that stage of development. Building our To-do list application The first step to building an application within AIR is to cre… | 2007 | Jonathan Snook | jonathansnook | 2007-12-19T00:00:00+00:00 | https://24ways.org/2007/christmas-is-in-the-air/ | code |
| 55 | 55 | How Tabs Should Work | Tabs in browsers (not browser tabs) are one of the oldest custom UI elements in a browser that I can think of. They’ve been done to death. But, sadly, most of the time I come across them, the tabs have been badly, or rather partially, implemented. So this post is my definition of how a tabbing system should work, and one approach of implementing that. But… tabs are easy, right? I’ve been writing code for tabbing systems in JavaScript for coming up on a decade, and at one point I was pretty proud of how small I could make the JavaScript for the tabbing system: var tabs = $('.tab').click(function () { tabs.hide().filter(this.hash).show(); }).map(function () { return $(this.hash)[0]; }); $('.tab:first').click(); Simple, right? Nearly fits in a tweet (ignoring the whole jQuery library…). Still, it’s riddled with problems that make it a far from perfect solution. Requirements: what makes the perfect tab? All content is navigable and available without JavaScript (crawler-compatible and low JS-compatible). ARIA roles. The tabs are anchor links that: are clickable have block layout have their href pointing to the id of the panel element use the correct cursor (i.e. cursor: pointer). Since tabs are clickable, the user can open in a new tab/window and the page correctly loads with the correct tab open. Right-clicking (and Shift-clicking) doesn’t cause the tab to be selected. Native browser Back/Forward button correctly changes the state of the selected tab (think about it working exactly as if there were no JavaScript in place). The first three points are all to do with the semantics of the markup and how the markup has been styled. I think it’s easy to do a good job by thinking of tabs as links, and not as some part of an application. Links are navigable, and they should work the same way other links on the page work. The last three points are JavaScript problems. Let’s investigate that. The shitmus test Like a litmus test, here’s a couple of quick ways you can tell if a tabbing system is poorly implemented: Cha… | 2015 | Remy Sharp | remysharp | 2015-12-22T00:00:00+00:00 | https://24ways.org/2015/how-tabs-should-work/ | code |
| 223 | 223 | Calculating Color Contrast | Some websites and services allow you to customize your profile by uploading pictures, changing the background color or other aspects of the design. As a customer, this personalization turns a web app into your little nest where you store your data. As a designer, letting your customers have free rein over the layout and design is a scary prospect. So what happens to all the stock text and images that are designed to work on nice white backgrounds? Even the Mac only lets you choose between two colors for the OS, blue or graphite! Opening up the ability to customize your site’s color scheme can be a recipe for disaster unless you are flexible and understand how to find maximum color contrasts. In this article I will walk you through two simple equations to determine if you should be using white or black text depending on the color of the background. The equations are both easy to implement and produce similar results. It isn’t a matter of which is better, but more the fact that you are using one at all! That way, even with the craziest of Geocities color schemes that your customers choose, at least your text will still be readable. Let’s have a look at a range of various possible colors. Maybe these are pre-made color schemes, corporate colors, or plucked from an image. Now that we have these potential background colors and their hex values, we need to find out whether the corresponding text should be in white or black, based on which has a higher contrast, therefore affording the best readability. This can be done at runtime with JavaScript or in the back-end before the HTML is served up. There are two functions I want to compare. The first, I call ’50%’. It takes the hex value and compares it to the value halfway between pure black and pure white. If the hex value is less than half, meaning it is on the darker side of the spectrum, it returns white as the text color. If the result is greater than half, it’s on the lighter side of the spectrum and returns black as the text value. In PHP: function getContra… | 2010 | Brian Suda | briansuda | 2010-12-24T00:00:00+00:00 | https://24ways.org/2010/calculating-color-contrast/ | code |
| 99 | 99 | A Christmas hCard From Me To You | So apparently Christmas is coming. And what is Christmas all about? Well, cleaning out your address book, of course! What better time to go through your contacts, making sure everyone’s details are up date and that you’ve deleted all those nasty clients who never paid on time? It’s also a good time to make sure your current clients and colleagues have your most up-to-date details, so instead of filling up their inboxes with e-cards, why not send them something useful? Something like a… vCard! (See what I did there?) Just in case you’ve been working in a magical toy factory in the upper reaches of Scandinavia for the last few years, I’m going to tell you that now would also be the perfect time to get into microformats. Using the hCard format, we’ll build a very simple web page and markup our contact details in such a way that they’ll be understood by microformats plugins, like Operator or Tails for Firefox, or the cross-browser Microformats Bookmarklet. Oh, and because Christmas is all about dressing up and being silly, we’ll make the whole thing look nice and have a bit of fun with some CSS3 progressive enhancement. If you can’t wait to see what we end up with, you can preview it here. Step 1: Contact Details First, let’s decide what details we want to put on the page. I’d put my full name, my email address, my phone number, and my postal address, but I’d rather not get surprise visits from strangers when I’m fannying about with my baubles, so I’m going to use Father Christmas instead (that’s Santa to you Yanks). Father Christmas fatherchristmas@elliotjaystocks.com 25 Laughingallthe Way Snow Falls Lapland Finland 010 60 58 000 Step 2: hCard Creator Now I’m not sure about you, but I rather like getting the magical robot pixies to do the work for me, so head on over to the hCard Creator and put those pixies to work! Pop in your details and they’ll give you some nice microformatted HTML in turn. <div id="hcard-Father-Christmas" class="vcard"> <a class="url fn" href="http://elliotjaystocks.com/fatherc… | 2008 | Elliot Jay Stocks | elliotjaystocks | 2008-12-10T00:00:00+00:00 | https://24ways.org/2008/a-christmas-hcard-from-me-to-you/ | code |
| 305 | 305 | CSS Writing Modes | Since you may not have a lot of time, I’m going to start at the end, with the dessert. You can use a little-known, yet important and powerful CSS property to make text run vertically. Like this. Or instead of running text vertically, you can layout a set of icons or interface buttons in this way. Or, of course, with anything on your page. The CSS I’ve applied makes the browser rethink the orientation of the world, and flow the layout of this element at a 90° angle to “normal”. Check out the live demo, highlight the headline, and see how the cursor is now sideways. See the Pen Writing Mode Demo — Headline by Jen Simmons (@jensimmons) on CodePen. The code for accomplishing this is pretty simple. h1 { writing-mode: vertical-rl; } That’s all it takes to switch the writing mode from the web’s default horizontal top-to-bottom mode to a vertical right-to-left mode. If you apply such code to the html element, the entire page is switched, affecting the scroll direction, too. In my example above, I’m telling the browser that only the h1 will be in this vertical-rl mode, while the rest of my page stays in the default of horizontal-tb. So now the dessert course is over. Let me serve up this whole meal, and explain the the CSS Writing Mode Specification. Why learn about writing modes? There are three reasons I’m teaching writing modes to everyone—including western audiences—and explaining the whole system, instead of quickly showing you a simple trick. We live in a big, diverse world, and learning about other languages is fascinating. Many of you lay out pages in languages like Chinese, Japanese and Korean. Or you might be inspired to in the future. Using writing-mode to turn bits sideways is cool. This CSS can be used in all kinds of creative ways, even if you are working only in English. Most importantly, I’ve found understanding Writing Modes incredibly helpful when understanding Flexbox and CSS Grid. Before I learned Writing Mode, I felt like there was still a big hole in my knowledge, something I just didn’… | 2016 | Jen Simmons | jensimmons | 2016-12-23T00:00:00+00:00 | https://24ways.org/2016/css-writing-modes/ | code |
| 220 | 220 | Finding Your Way with Static Maps | Since the introduction of the Google Maps service in 2005, online maps have taken off in a way not really possible before the invention of slippy map interaction. Although quickly followed by a plethora of similar services from both commercial and non-commercial parties, Google’s first-mover advantage, and easy-to-use developer API saw Google Maps become pretty much the de facto mapping service. It’s now so easy to add a map to a web page, there’s no reason not to. Dropping an iframe map into your page is as simple as embedding a YouTube video. But there’s one crucial drawback to both the solution Google provides for you to drop into your page and the code developers typically implement themselves – they don’t work without JavaScript. A bit about JavaScript Back in October of this year, The Yahoo! Developer Network blog ran some tests to measure how many visitors to the Yahoo! home page didn’t have JavaScript available or enabled in their browser. It’s an interesting test when you consider that the audience for the Yahoo! home page (one of the most visited pages on the web) represents about as mainstream a sample as you’ll find. If there’s any such thing as an ‘average Web user’ then this is them. The results surprised me. It varied from region to region, but at most just two per cent of visitors didn’t have JavaScript running. To be honest, I was expecting it to be higher, but this quote from the article caught my attention: While the percentage of visitors with JavaScript disabled seems like a low number, keep in mind that small percentages of big numbers are also big numbers. That’s right, of course, and it got me thinking about what that two per cent means. For many sites, two per cent is the number of visitors using the Opera web browser, using IE6, or using Mobile Safari. So, although a small percentage of the total, users without JavaScript can’t just be forgotten about, and catering for them is at the very heart of how the web is supposed to work. Starting with content in HTML, we layer on … | 2010 | Drew McLellan | drewmclellan | 2010-12-01T00:00:00+00:00 | https://24ways.org/2010/finding-your-way-with-static-maps/ | code |
| 110 | 110 | Shiny Happy Buttons | Since Mac OS X burst onto our screens, glossy, glassy, shiny buttons have been almost de rigeur, and have essentially, along with reflections and rounded corners, become a cliché of Web 2.0 “design”. But if you can’t beat ‘em you’d better join ‘em. So, in this little contribution to our advent calendar, we’re going to take a plain old boring HTML button, and 2.0 it up the wazoo. But, here’s the catch. We’ll use no images, either in our HTML or our CSS. No sliding doors, no image replacement techniques. Just straight up, CSS, CSS3 and a bit of experimental CSS. And, it will be compatible with pretty much any browser (though with some progressive enhancement for those who keep up with the latest browsers). The HTML We’ll start with our HTML. <button type="submit">This is a shiny button</button> OK, so it’s not shiny yet – but boy will it ever be. Before styling, that’s going to look like this. Ironically, depending on the operating system and browser you are using, it may well be a shiny button already, but that’s not the point. We want to make it shiny 2.0. Our mission is to make it look something like this If you want to follow along at home keep in mind that depending on which browser you are using you may see fewer of the CSS effects we’ve added to create the button. As of writing, only in Safari are all the effects we’ll apply supported. Taking a look at our finished product, here’s what we’ve done to it: We’ve given the button some padding and a width. We’ve changed the text color, and given the text a drop shadow. We’ve given the button a border. We’ve given the button some rounded corners. We’ve given the button a drop shadow. We’ve given the button a gradient background. and remember, all without using any images. Styling the button So, let’s get to work. First, we’ll add given the element some padding and a width: button { padding: .5em; width: 15em; } Next, we’ll add the text color, and the drop shadow: color: #ffffff; text-shadow: 1px 1px 1px #000; A note on text-shadow I… | 2008 | John Allsopp | johnallsopp | 2008-12-18T00:00:00+00:00 | https://24ways.org/2008/shiny-happy-buttons/ | code |
| 42 | 42 | An Overview of SVG Sprite Creation Techniques | SVG can be used as an icon system to replace icon fonts. The reasons why SVG makes for a superior icon system are numerous, but we won’t be going over them in this article. If you don’t use SVG icons and are interested in knowing why you may want to use them, I recommend you check out “Inline SVG vs Icon Fonts” by Chris Coyier – it covers the most important aspects of both systems and compares them with each other to help you make a better decision about which system to choose. Once you’ve made the decision to use SVG instead of icon fonts, you’ll need to think of the best way to optimise the delivery of your icons, and ways to make the creation and use of icons faster. Just like bitmaps, we can create image sprites with SVG – they don’t look or work exactly alike, but the basic concept is pretty much the same. There are several ways to create SVG sprites, and this article will give you an overview of three of them. While we’re at it, we’re going to take a look at some of the available tools used to automate sprite creation and fallback for us. Prerequisites The content of this article assumes you are familiar with SVG. If you’ve never worked with SVG before, you may want to look at some of the introductory tutorials covering SVG syntax, structure and embedding techniques. I recommend the following: SVG basics: Using SVG. Structure: Structuring, Grouping, and Referencing in SVG — The <g>, <use>, <defs> and <symbol> Elements. We’ll mention <use> and <symbol> quite a bit in this article. Embedding techniques: Styling and Animating SVGs with CSS. The article covers several topics, but the section linked focuses on embedding techniques. A compendium of SVG resources compiled by Chris Coyier — contains resources to almost every aspect of SVG you might be interested in. And if you’re completely new to the concept of spriting, Chris Coyier’s CSS Sprites explains all about them. Another important SVG feature is the viewBox attribute. For some of the techniques, knowing your way around this attribute is … | 2014 | Sara Soueidan | sarasoueidan | 2014-12-16T00:00:00+00:00 | https://24ways.org/2014/an-overview-of-svg-sprite-creation-techniques/ | code |
| 263 | 263 | Securing Your Site like It’s 1999 | Running a website in the early years of the web was a scary business. The web was an evolving medium, and people were finding new uses for it almost every day. From book stores to online auctions, the web was an expanding universe of new possibilities. As the web evolved, so too did the knowledge of its inherent security vulnerabilities. Clever tricks that were played on one site could be copied on literally hundreds of other sites. It was a normal sight to log in to a website to find nothing working because someone had breached its defences and deleted its database. Lessons in web security in those days were hard-earned. What follows are examples of critical mistakes that brought down several early websites, and how you can help protect yourself and your team from the same fate. Bad input validation: Trusting anything the user sends you Our story begins in the most unlikely place: Animal Crossing. Animal Crossing was a 2001 video game set in a quaint town, filled with happy-go-lucky inhabitants that co-exist peacefully. Like most video games, Animal Crossing was the subject of many fan communities on the early web. One such unofficial web forum was dedicated to players discussing their adventures in Animal Crossing. Players could trade secrets, ask for help, and share pictures of their virtual homes. This might sound like a model community to you, but you would be wrong. One day, a player discovered a hidden field in the forum’s user profile form. Normally, this page allows users to change their name, their password, or their profile photo. This person discovered that the hidden field contained their unique user ID, which identifies them when the forum’s backend saves profile changes to its database. They discovered that by modifying the form to change the user ID, they could make changes to any other player’s profile. Needless to say, this idyllic online community descended into chaos. Users changed each other’s passwords, deleted each other’s messages, and attacked each-other under the cover of complete anonym… | 2018 | Katie Fenn | katiefenn | 2018-12-01T00:00:00+00:00 | https://24ways.org/2018/securing-your-site-like-its-1999/ | code |
| 92 | 92 | Redesigning the Media Query | Responsive web design is showing us that designing content is more important than designing containers. But if you’ve given RWD a serious try, you know that shifting your focus from the container is surprisingly hard to do. There are many factors and instincts working against you, and one culprit is a perpetrator you’d least suspect. The media query is the ringmaster of responsive design. It lets us establish the rules of the game and gives us what we need most: control. However, like some kind of evil double agent, the media query is actually working against you. Its very nature diverts your attention away from content and forces you to focus on the container. The very act of choosing a media query value means choosing a screen size. Look at the history of the media query—it’s always been about the container. Values like screen, print, handheld and tv don’t have anything to do with content. The modern media query lets us choose screen dimensions, which is great because it makes RWD possible. But it’s still the act of choosing something that is completely unpredictable. Content should dictate our breakpoints, not the container. In order to get our focus back to the only thing that matters, we need a reengineered media query—one that frees us from thinking about screen dimensions. A media query that works for your content, not the window. Fortunately, Sass 3.2 is ready and willing to take on this challenge. Thinking in Columns Fluid grids never clicked for me. I feel so disoriented and confused by their squishiness. Responsive design demands their use though, right? I was ready to surrender until I found a grid that turned my world upright again. The Frameless Grid by Joni Korpi demonstrates that column and gutter sizes can stay fixed. As the screen size changes, you simply add or remove columns to accommodate. This made sense to me and armed with this concept I was able to give Sass the first component it needs to rewrite the media query: fixed column and gutter size variables. $grid-column: 60px; $grid-… | 2012 | Les James | lesjames | 2012-12-13T00:00:00+00:00 | https://24ways.org/2012/redesigning-the-media-query/ | code |
| 136 | 136 | Making XML Beautiful Again: Introducing Client-Side XSL | Remember that first time you saw XML and got it? When you really understood what was possible and the deep meaning each element could carry? Now when you see XML, it looks ugly, especially when you navigate to a page of XML in a browser. Well, with every modern browser now supporting XSL 1.0, I’m going to show you how you can turn something as simple as an ATOM feed into a customised page using a browser, Notepad and some XSL. What on earth is this XSL? XSL is a family of recommendations for defining XML document transformation and presentation. It consists of three parts: XSLT 1.0 – Extensible Stylesheet Language Transformation, a language for transforming XML XPath 1.0 – XML Path Language, an expression language used by XSLT to access or refer to parts of an XML document. (XPath is also used by the XML Linking specification) XSL-FO 1.0 – Extensible Stylesheet Language Formatting Objects, an XML vocabulary for specifying formatting semantics XSL transformations are usually a one-to-one transformation, but with newer versions (XSL 1.1 and XSL 2.0) its possible to create many-to-many transformations too. So now you have an overview of XSL, on with the show… So what do I need? So to get going you need a browser an supports client-side XSL transformations such as Firefox, Safari, Opera or Internet Explorer. Second, you need a source XML file – for this we’re going to use an ATOM feed from Flickr.com. And lastly, you need an editor of some kind. I find Notepad++ quick for short XSLs, while I tend to use XMLSpy or Oxygen for complex XSL work. Because we’re doing a client-side transformation, we need to modify the XML file to tell it where to find our yet-to-be-written XSL file. Take a look at the source XML file, which originates from my Flickr photos tagged sky, in ATOM format. The top of the ATOM file now has an additional <?xml-stylesheet /> instruction, as can been seen on Line 2 below. This instructs the browser to use the XSL file to transform the document. <?xml version="1.0" encoding="utf-8" sta… | 2006 | Ian Forrester | ianforrester | 2006-12-07T00:00:00+00:00 | https://24ways.org/2006/beautiful-xml-with-xsl/ | code |
| 91 | 91 | Infinite Canvas: Moving Beyond the Page | Remember Web 2.0? I do. In fact, that phrase neatly bifurcates my life on the internet. Pre-2.0, I was occupied by chatting on AOL and eventually by learning HTML so I could build sites on Geocities. Around 2002, however, I saw a WYSIWYG demo in Dreamweaver. The instructor was dragging boxes and images around a canvas. With a few clicks he was able to build a dynamic, single-page interface. Coming from the world of tables and inline HTML styles, I was stunned. As I entered college the next year, the web was blossoming: broadband, Wi-Fi, mobile (proud PDA owner, right here), CSS, Ajax, Bloglines, Gmail and, soon, Google Maps. I was a technology fanatic and a hobbyist web developer. For me, the web had long been informational. It was now rapidly becoming something else, something more: sophisticated, presentational, actionable. In 2003 we watched as the internet changed. The predominant theme of those early Web 2.0 years was the withering of Internet Explorer 6 and the triumph of web standards. Upon cresting that mountain, we looked around and collectively breathed the rarefied air of pristine HMTL and CSS, uncontaminated by toxic hacks and forks – only to immediately begin hurtling down the other side at what is, frankly, terrifying speed. Ten years later, we are still riding that rocket. Our days (and nights) are spent cramming for exams on CSS3 and RWD and Sass and RESS. We are the proud, frazzled owners of tiny pocket computers that annihilate the best laptops we could have imagined, and the architects of websites that are no longer restricted to big screens nor even segregated by device. We dragoon our sites into working any time, anywhere. At this point, we can hardly ask the spec developers to slow down to allow us to catch our breath, nor should we. It is, without a doubt, a most wonderful time to be a web developer. But despite the newfound luxury of rounded corners, gradients, embeddable fonts, low-level graphics APIs, and, glory be, shadows, the canyon between HTML and native appears to be as wide as… | 2012 | Nathan Peretic | nathanperetic | 2012-12-21T00:00:00+00:00 | https://24ways.org/2012/infinite-canvas-moving-beyond-the-page/ | code |
| 202 | 202 | Design Systems and CSS Grid | Recently, my client has been looking at creating a few new marketing pages for their website. They currently have a design system in place but they’re looking to push this forward into 2018 with some small and possibly some larger changes. To start with we are creating a couple of new marketing pages. As well as making use of existing components within the design systems component library there are a couple of new components. Looking at the first couple of sketch files I felt this would be a great opportunity to use CSS Grid, to me the newer components need to be laid out on that page and grid would help with this perfectly. As well as this layout of the new components and the text within it, imagery would be used that breaks out of the grid and pushes itself into the spaces where the text is aligned. The existing grid system When the site was rebuilt in 2015 the team decided to make use of Sass and Susy, a “lightweight grid-layout engine using Sass”. It was built separating the grid system from the components that would be laid out on the page with a container, a row, an optional column, and a block. To make use of the grid system on a page for a component that would take the full width of the row you would have to write something like this: <div class="grid-container"> <div class="grid-row"> <div class="grid-column-4"> <div class="grid-block"> <!-- component code here --> </div> </div> </div> </div> Using a grid system similar to this can easily create quite the tag soup. It could fill the HTML full of divs that may become complex to understand and difficult to edit. Although there is this reliance on several <div>s to lay out the components on a page it does allow a tidy way to place the component code within that page. It abstracts the layout of the page to its own code, its own system, so the components can ‘fit’ where needed. The requirements of the new grid system Moving forward I set myself some goals for what I’d like to have achieved in this new grid system: It needs to… | 2017 | Stuart Robson | stuartrobson | 2017-12-12T00:00:00+00:00 | https://24ways.org/2017/design-systems-and-css-grid/ | code |
| 54 | 54 | Putting My Patterns through Their Paces | Over the last few years, the conversation around responsive design has shifted subtly, focusing not on designing pages, but on patterns: understanding the small, reusable elements that comprise a larger design system. And given that many of those patterns are themselves responsive, learning to manage these small layout systems has become a big part of my work. The thing is, the more pattern-driven work I do, the more I realize my design process has changed in a number of subtle, important ways. I suppose you might even say that pattern-driven design has, in a few ways, redesigned me. Meet the Teaser Here’s a recent example. A few months ago, some friends and I redesigned The Toast. (It was a really, really fun project, and we learned a lot.) Each page of the site is, as you might guess, stitched together from a host of tiny, reusable patterns. Some of them, like the search form and footer, are fairly unique, and used once per page; others are used more liberally, and built for reuse. The most prevalent example of these more generic patterns is the teaser, which is classed as, uh, .teaser. (Look, I never said I was especially clever.) In its simplest form, a teaser contains a headline, which links to an article: Fairly straightforward, sure. But it’s just the foundation: from there, teasers can have a byline, a description, a thumbnail, and a comment count. In other words, we have a basic building block (.teaser) that contains a few discrete content types – some required, some not. In fact, very few of those pieces need to be present; to qualify as a teaser, all we really need is a link and a headline. But by adding more elements, we can build slight variations of our teaser, and make it much, much more versatile. Nearly every element visible on this page is built out of our generic “teaser” pattern. But the teaser variation I’d like to call out is the one that appears on The Toast’s homepage, on search results or on section fronts. In the main content area, each teaser in the list features larger i… | 2015 | Ethan Marcotte | ethanmarcotte | 2015-12-10T00:00:00+00:00 | https://24ways.org/2015/putting-my-patterns-through-their-paces/ | code |
| 296 | 296 | Animation in Design Systems | Our modern front-end workflow has matured over time to include design systems and component libraries that help us stay organized, improve workflows, and simplify maintenance. These systems, when executed well, ensure proper documentation of the code available and enable our systems to scale with reduced communication conflicts. But while most of these systems take a critical stance on fonts, colors, and general building blocks, their treatment of animation remains disorganized and ad-hoc. Let’s leverage existing structures and workflows to reduce friction when it comes to animation and create cohesive and performant user experiences. Understand the importance of animation Part of the reason we treat animation like a second-class citizen is that we don’t really consider its power. When users are scanning a website (or any environment or photo), they are attempting to build a spatial map of their surroundings. During this process, nothing quite commands attention like something in motion. We are biologically trained to notice motion: evolutionarily speaking, our survival depends on it. For this reason, animation when done well can guide your users. It can aid and reinforce these maps, and give us a sense that we understand the UX more deeply. We retrieve information and put it back where it came from instead of something popping in and out of place. “Where did that menu go? Oh it’s in there.” For a deeper dive into how animation can connect disparate states, I wrote about the Importance of Context-Shifting in UX Patterns for CSS-Tricks. An animation flow on mobile. Animation also aids in perceived performance. Viget conducted a study where they measured user engagement with a standard loading GIF versus a custom animation. Customers were willing to wait almost twice as long for the custom loader, even though it wasn’t anything very fancy or crazy. Just by showing their users that they cared about them, they stuck around, and the bounce rates dropped. 14 second generic loading screen.22 second custom loadin… | 2016 | Sarah Drasner | sarahdrasner | 2016-12-16T00:00:00+00:00 | https://24ways.org/2016/animation-in-design-systems/ | code |
| 21 | 21 | Keeping Parts of Your Codebase Private on GitHub | Open source is brilliant, there’s no denying that, and GitHub has been instrumental in open source’s recent success. I’m a keen open-sourcerer myself, and I have a number of projects on GitHub. However, as great as sharing code is, we often want to keep some projects to ourselves. To this end, GitHub created private repositories which act like any other Git repository, only, well, private! A slightly less common issue, and one I’ve come up against myself, is the desire to only keep certain parts of a codebase private. A great example would be my site, CSS Wizardry; I want the code to be open source so that people can poke through and learn from it, but I want to keep any draft blog posts private until they are ready to go live. Thankfully, there is a very simple solution to this particular problem: using multiple remotes. Before we begin, it’s worth noting that you can actually build a GitHub Pages site from a private repo. You can keep the entire source private, but still have GitHub build and display a full Pages/Jekyll site. I do this with csswizardry.net. This post will deal with the more specific problem of keeping only certain parts of the codebase (branches) private, and expose parts of it as either an open source project, or a built GitHub Pages site. N.B. This post requires some basic Git knowledge. Adding your public remote Let’s assume you’re starting from scratch and you currently have no repos set up for your project. (If you do already have your public repo set up, skip to the “Adding your private remote” section.) So, we have a clean slate: nothing has been set up yet, we’re doing all of that now. On GitHub, create two repositories. For the sake of this article we shall call them site.com and private.site.com. Make the site.com repo public, and the private.site.com repo private (you will need a paid GitHub account). On your machine, create the site.com directory, in which your project will live. Do your initial work in there, commit some stuff — whatever you need to do. Now we need to link… | 2013 | Harry Roberts | harryroberts | 2013-12-09T00:00:00+00:00 | https://24ways.org/2013/keeping-parts-of-your-codebase-private-on-github/ | code |
| 163 | 163 | Get To Grips with Slippy Maps | Online mapping has definitely hit mainstream. Google Maps made ‘slippy maps’ popular and made it easy for any developer to quickly add a dynamic map to his or her website. You can now find maps for store locations, friends nearby, upcoming events, and embedded in blogs. In this tutorial we’ll show you how to easily add a map to your site using the Mapstraction mapping library. There are many map providers available to choose from, each with slightly different functionality, design, and terms of service. Mapstraction makes deciding which provider to use easy by allowing you to write your mapping code once, and then easily switch providers. Assemble the pieces Utilizing any of the mapping library typically consists of similar overall steps: Create an HTML div to hold the map Include the Javascript libraries Create the Javascript Map element Set the initial map center and zoom level Add markers, lines, overlays and more Create the Map Div The HTML div is where the map will actually show up on your page. It needs to have a unique id, because we’ll refer to that later to actually put the map here. This also lets you have multiple maps on a page, by creating individual divs and Javascript map elements. The size of the div also sets the height and width of the map. You set the size using CSS, either inline with the element, or via a CSS reference to the element id or class. For this example, we’ll use inline styling. <div id="map" style="width: 400px; height: 400px;"></div> Include Javascript libraries A mapping library is like any Javascript library. You need to include the library in your page before you use the methods of that library. For our tutorial, we’ll need to include at least two libraries: Mapstraction, and the mapping API(s) we want to display. Our first example we’ll use the ubiquitous Google Maps library. However, you can just as easily include Yahoo, MapQuest, or any of the other supported libraries. Another important aspect of the mapping libraries is that many of them require an API k… | 2007 | Andrew Turner | andrewturner | 2007-12-02T00:00:00+00:00 | https://24ways.org/2007/get-to-grips-with-slippy-maps/ | code |
| 104 | 104 | Sitewide Search On A Shoe String | One of the questions I got a lot when I was building web sites for smaller businesses was if I could create a search engine for their site. Visitors should be able to search only this site and find things without the maintainer having to put “related articles” or “featured content” links on every page by hand. Back when this was all fields this wasn’t easy as you either had to write your own scraping tool, use ht://dig or a paid service from providers like Yahoo, Altavista or later on Google. In the former case you had to swallow the bitter pill of computing and indexing all your content and storing it in a database for quick access and in the latter it hurt your wallet. Times have moved on and nowadays you can have the same functionality for free using Yahoo’s “Build your own search service” – BOSS. The cool thing about BOSS is that it allows for a massive amount of hits a day and you can mash up the returned data in any format you want. Another good feature of it is that it comes with JSON-P as an output format which makes it possible to use it without any server-side component! Starting with a working HTML form In order to add a search to your site, you start with a simple HTML form which you can use without JavaScript. Most search engines will allow you to filter results by domain. In this case we will search “bbc.co.uk”. If you use Yahoo as your standard search, this could be: <form id="customsearch" action="http://search.yahoo.com/search"> <div> <label for="p">Search this site:</label> <input type="text" name="p" id="term"> <input type="hidden" name="vs" id="site" value="bbc.co.uk"> <input type="submit" value="go"> </div> </form> The Google equivalent is: <form id="customsearch" action="http://www.google.co.uk/search"> <div> <label for="p">Search this site:</label> <input type="text" name="as_q" id="term"> <input type="hidden" name="as_sitesearch" id="site" value="bbc.co.uk"> <input type="submit" value="go"> </div> </form> In any case make sure to use the ID term for the searc… | 2008 | Christian Heilmann | chrisheilmann | 2008-12-04T00:00:00+00:00 | https://24ways.org/2008/sitewide-search-on-a-shoestring/ | code |
| 157 | 157 | Capturing Caps Lock | One of the more annoying aspects of having to remember passwords (along with having to remember loads of them) is that if you’ve got Caps Lock turned on accidentally when you type one in, it won’t work, and you won’t know why. Most desktop computers alert you in some way if you’re trying to enter your password to log on and you’ve enabled Caps Lock; there’s no reason why the web can’t do the same. What we want is a warning – maybe the user wants Caps Lock on, because maybe their password is in capitals – rather than something that interrupts what they’re doing. Something subtle. But that doesn’t answer the question of how to do it. Sadly, there’s no way of actually detecting whether Caps Lock is on directly. However, there’s a simple work-around; if the user presses a key, and it’s a capital letter, and they don’t have the Shift key depressed, why then they must have Caps Lock on! Simple. DOM scripting allows your code to be notified when a key is pressed in an element; when the key is pressed, you get the ASCII code for that key. Capital letters, A to Z, have ASCII codes 65 to 90. So, the code would look something like: on a key press if the ASCII code for the key is between 65 and 90 *and* if shift is pressed warn the user that they have Caps Lock on, but let them carry on end if end keypress The actual JavaScript for this is more complicated, because both event handling and keypress information differ across browsers. Your event handling functions are passed an event object, except in Internet Explorer where you use the global event object; the event object has a which parameter containing the ASCII code for the key pressed, except in Internet Explorer where the event object has a keyCode parameter; some browsers store whether the shift key is pressed in a shiftKey parameter and some in a modifiers parameter. All this boils down to code that looks something like this: keypress: function(e) { var ev = e ? e : window.event; if (!ev) { return; } var targ = ev.target ? ev.target : ev.srcElement; /… | 2007 | Stuart Langridge | stuartlangridge | 2007-12-04T00:00:00+00:00 | https://24ways.org/2007/capturing-caps-lock/ | code |
| 49 | 49 | Universal React | One of the libraries to receive a huge amount of focus in 2015 has been ReactJS, a library created by Facebook for building user interfaces and web applications. More generally we’ve seen an even greater rise in the number of applications built primarily on the client side with most of the logic implemented in JavaScript. One of the main issues with building an app in this way is that you immediately forgo any customers who might browse with JavaScript turned off, and you can also miss out on any robots that might visit your site to crawl it (such as Google’s search bots). Additionally, we gain a performance improvement by being able to render from the server rather than having to wait for all the JavaScript to be loaded and executed. The good news is that this problem has been recognised and it is possible to build a fully featured client-side application that can be rendered on the server. The way in which these apps work is as follows: The user visits www.yoursite.com and the server executes your JavaScript to generate the HTML it needs to render the page. In the background, the client-side JavaScript is executed and takes over the duty of rendering the page. The next time a user clicks, rather than being sent to the server, the client-side app is in control. If the user doesn’t have JavaScript enabled, each click on a link goes to the server and they get the server-rendered content again. This means you can still provide a very quick and snappy experience for JavaScript users without having to abandon your non-JS users. We achieve this by writing JavaScript that can be executed on the server or on the client (you might have heard this referred to as isomorphic) and using a JavaScript framework that’s clever enough handle server- or client-side execution. Currently, ReactJS is leading the way here, although Ember and Angular are both working on solutions to this problem. It’s worth noting that this tutorial assumes some familiarity with React in general, its syntax and concepts. If you’d like a refresher, th… | 2015 | Jack Franklin | jackfranklin | 2015-12-05T00:00:00+00:00 | https://24ways.org/2015/universal-react/ | code |
| 323 | 323 | Introducing UDASSS! | Okay. What’s that mean? Unobtrusive Degradable Ajax Style Sheet Switcher! Boy are you in for treat today ‘cause we’re gonna have a whole lotta Ajaxifida Unobtrucitosity CSS swappin’ Fun! Okay are you really kidding? Nope. I’ve even impressed myself on this one. Unfortunately, I don’t have much time to tell you the ins and outs of what I actually did to get this to work. We’re talking JavaScript, CSS, PHP…Ajax. But don’t worry about that. I’ve always believed that a good A.P.I. is an invisible A.P.I… and this I felt I achieved. The only thing you need to know is how it works and what to do. A Quick Introduction Anyway… First of all, the idea is very simple. I wanted something just like what Paul Sowden put together in Alternative Style: Working With Alternate Style Sheets from Alistapart Magazine EXCEPT a few minor (not-so-minor actually) differences which I’ve listed briefly below: Allow users to switch styles without JavaScript enabled (degradable) Preventing the F.O.U.C. before the window ‘load’ when getting preferred styles Keep the JavaScript entirely off our markup (no onclick’s or onload’s) Make it very very easy to implement (ok, Paul did that too) What I did to achieve this was used server-side cookies instead of JavaScript cookies. Hence, PHP. However this isn’t a “PHP style switcher” – which is where Ajax comes in. For the extreme technical folks, no, there is no xml involved here, or even a callback response. I only say Ajax because everyone knows what ‘it’ means. With that said, it’s the Ajax that sets the cookies ‘on the fly’. Got it? Awesome! What you need Luckily, I’ve done the work for you. It’s all packaged up in a nice zip file (at the end…keep reading for now) – so from here on out, just follow these instructions As I’ve mentioned, one of the things we’ll be working with is PHP. So, first things first, open up a file called index and save it with a ‘.php’ extension. Next, place the following text at the top of your document (even above your DOCTYPE) <?php require_once('uti… | 2005 | Dustin Diaz | dustindiaz | 2005-12-18T00:00:00+00:00 | https://24ways.org/2005/introducing-udasss/ | code |
| 129 | 129 | Knockout Type - Thin Is Always In | OS X has gorgeous native anti-aliasing (although I will admit to missing 10px aliased Geneva — *sigh*). This is especially true for dark text on a light background. However, things can go awry when you start using light text on a dark background. Strokes thicken. Counters constrict. Letterforms fill out like seasonal snackers. So how do we combat the fat? In Safari and other Webkit-based browsers we can use the CSS ‘text-shadow’ property. While trying to add a touch more contrast to the navigation on haveamint.com I noticed an interesting side-effect on the weight of the type. The second line in the example image above has the following style applied to it: This creates an invisible drop-shadow. (Why is it invisible? The shadow is positioned directly behind the type (the first two zeros) and has no spread (the third zero). So the color, black, is completely eclipsed by the type it is supposed to be shadowing.) Why applying an invisible drop-shadow effectively lightens the weight of the type is unclear. What is clear is that our light-on-dark text is now of a comparable weight to its dark-on-light counterpart. You can see this trick in effect all over ShaunInman.com and in the navigation on haveamint.com and Subtraction.com. The HTML and CSS source code used to create the example images used in this article can be found here. | 2006 | Shaun Inman | shauninman | 2006-12-17T00:00:00+00:00 | https://24ways.org/2006/knockout-type/ | code |
| 165 | 165 | Transparent PNGs in Internet Explorer 6 | Newer breeds of browser such as Firefox and Safari have offered support for PNG images with full alpha channel transparency for a few years. With the use of hacks, support has been available in Internet Explorer 5.5 and 6, but the hacks are non-ideal and have been tricky to use. With IE7 winning masses of users from earlier versions over the last year, full PNG alpha-channel transparency is becoming more of a reality for day-to-day use. However, there are still numbers of IE6 users out there who we can’t leave out in the cold this Christmas, so in this article I’m going to look what we can do to support IE6 users whilst taking full advantage of transparency for the majority of a site’s visitors. So what’s alpha channel transparency? Cast your minds back to the Ghost of Christmas Past, the humble GIF. Images in GIF format offer transparency, but that transparency is either on or off for any given pixel. Each pixel’s either fully transparent, or a solid colour. In GIF, transparency is effectively just a special colour you can chose for a pixel. The PNG format tackles the problem rather differently. As well as having any colour you chose, each pixel also carries a separate channel of information detailing how transparent it is. This alpha channel enables a pixel to be fully transparent, fully opaque, or critically, any step in between. This enables designers to produce images that can have, for example, soft edges without any of the ‘halo effect’ traditionally associated with GIF transparency. If you’ve ever worked on a site that has different colour schemes and therefore requires multiple versions of each graphic against a different colour, you’ll immediately see the benefit. What’s perhaps more interesting than that, however, is the extra creative freedom this gives designers in creating beautiful sites that can remain web-like in their ability to adjust, scale and reflow. The Internet Explorer problem Up until IE7, there has been no fully native support for PNG alpha channel transparency in Internet Expl… | 2007 | Drew McLellan | drewmclellan | 2007-12-01T00:00:00+00:00 | https://24ways.org/2007/supersleight-transparent-png-in-ie6/ | code |
| 294 | 294 | New Tricks for an Old Dog | Much of my year has been spent helping new team members find their way around the expansive and complex codebase that is the TweetDeck front-end, trying to build a happy and productive group of people around a substantial codebase with many layers of legacy. I’ve loved doing this. Everything from writing new documentation, drawing diagrams, and holding technical architecture sessions teaches you something you didn’t know or exposes an area of uncertainty that you can go work on. In this article, I hope to share some experiences and techniques that will prove useful in your own situation and that you can impress your friends in some new and exciting ways! How do you do, fellow kids? To start with I’d like to introduce you to our JavaScript framework, Flight. Right now it’s used by twitter.com and TweetDeck although, as a company, Twitter is largely moving to React. Over time, as we used Flight for more complex interfaces, we found it wasn’t scaling with us. Composing components into trees was fiddly and often only applied for a specific parent-child pairing. It seems like an obvious feature with hindsight, but it didn’t come built-in to Flight, and it made reusing components a real challenge. There was no standard way to manage the state of a component; they all did it slightly differently, and the technique often varied by who was writing the code. This cost us in maintainability as you just couldn’t predict how a component would be built until you opened it. Making matters worse, Flight relied on events to move data around the application. Unfortunately, events aren’t good for giving structure to complex logic. They jump around in a way that’s hard to understand and debug, and force you to search your code for a specific string — the event name‚ to figure out what’s going on. To find fixes for these problems, we looked around at other frameworks. We like React for it’s simple, predictable state management and reactive re-render flow, and Elm for bringing strict functional programming to everyone. But when you ha… | 2016 | Tom Ashworth | tomashworth | 2016-12-18T00:00:00+00:00 | https://24ways.org/2016/new-tricks-for-an-old-dog/ | code |
| 175 | 175 | Front-End Code Reusability with CSS and JavaScript | Most web standards-based developers are more than familiar with creating their sites with semantic HTML with lots and lots of CSS. With each new page in a design, the CSS tends to grow and grow and more elements and styles are added. But CSS can be used to better effect. The idea of object-oriented CSS isn’t new. Nicole Sullivan has written a presentation on the subject and outlines two main concepts: separate structure and visual design; and separate container and content. Jeff Croft talks about Applying OOP Concepts to CSS: I can make a class of .box that defines some basic layout structure, and another class of .rounded that provides rounded corners, and classes of .wide and .narrow that define some widths, and then easily create boxes of varying widths and styles by assigning multiple classes to an element, without having to duplicate code in my CSS. This concept helps reduce CSS file size, allows for great flexibility, rapid building of similar content areas and means greater consistency throughout the entire design. You can also take this concept one step further and apply it to site behaviour with JavaScript. Build a versatile slideshow I will show you how to build multiple slideshows using jQuery, allowing varying levels of functionality which you may find on one site design. The code will be flexible enough to allow you to add previous/next links, image pagination and the ability to change the animation type. More importantly, it will allow you to apply any combination of these features. Image galleries are simply a list of images, so the obvious choice of marking the content up is to use a <ul>. Many designs, however, do not cater to non-JavaScript versions of the website, and thus don’t take in to account large multiple images. You could also simply hide all the other images in the list, apart from the first image. This method can waste bandwidth because the other images might be downloaded when they are never going to be seen. Taking this second concept — only showing one image — the only co… | 2009 | Trevor Morris | trevormorris | 2009-12-06T00:00:00+00:00 | https://24ways.org/2009/front-end-code-reusability-with-css-and-javascript/ | code |
| 117 | 117 | The First Tool You Reach For | Microsoft recently announced that Internet Explorer 8 will be released in the first half of 2009. Compared to the standards support of other major browsers, IE8 will not be especially great, but it will finally catch up with the state of the art in one specific area: support for CSS tables. This milestone has the potential to trigger an important change in the way you approach web design. To show you just how big a difference CSS tables can make, think about how you might code a fluid, three-column layout from scratch. Just to make your life more difficult, give it one fixed-width column, with a background colour that differs from the rest of the page. Ready? Go! Okay, since you’re the sort of discerning web designer who reads 24ways, I’m going to assume you at least considered doing this without using HTML tables for the layout. If you’re especially hardcore, I imagine you began thinking of CSS floats, negative margins, and faux columns. If you did, colour me impressed! Now admit it: you probably also gave an inward sigh about the time it would take to figure out the math on the negative margin overlaps, check for dropped floats in Internet Explorer and generally wrestle each of the major browsers into giving you what you want. If after all that you simply gave up and used HTML tables, I can’t say I blame you. There are plenty of professional web designers out there who still choose to use HTML tables as their main layout tool. Sure, they may know that users with screen readers get confused by inappropriate use of tables, but they have a job to do, and they want tools that will make that job easy, not difficult. Now let me show you how to do it with CSS tables. First, we have a div element for each of our columns, and we wrap them all in another two divs: <div class="container"> <div> <div id="menu"> ⋮ </div> <div id="content"> ⋮ </div> <div id="sidebar"> ⋮ </div> </div> </div> Don’t sweat the “div clutter” in this code. Unlike tables, divs have no semantic meaning, and can therefore b… | 2008 | Kevin Yank | kevinyank | 2008-12-13T00:00:00+00:00 | https://24ways.org/2008/the-first-tool-you-reach-for/ | code |
| 168 | 168 | Unobtrusively Mapping Microformats with jQuery | Microformats are everywhere. You can’t shake an electronic stick these days without accidentally poking a microformat-enabled site, and many developers use microformats as a matter of course. And why not? After all, why invent your own class names when you can re-use pre-defined ones that give your site extra functionality for free? Nevertheless, while it’s good to know that users of tools such as Tails and Operator will derive added value from your shiny semantics, it’s nice to be able to reuse that effort in your own code. We’re going to build a map of some of my favourite restaurants in Brighton. Fitting with the principles of unobtrusive JavaScript, we’ll start with a semantically marked up list of restaurants, then use JavaScript to add the map, look up the restaurant locations and plot them as markers. We’ll be using a couple of powerful tools. The first is jQuery, a JavaScript library that is ideally suited for unobtrusive scripting. jQuery allows us to manipulate elements on the page based on their CSS selector, which makes it easy to extract information from microformats. The second is Mapstraction, introduced here by Andrew Turner a few days ago. We’ll be using Google Maps in the background, but Mapstraction makes it easy to change to a different provider if we want to later. Getting Started We’ll start off with a simple collection of microformatted restaurant details, representing my seven favourite restaurants in Brighton. The full, unstyled list can be seen in restaurants-plain.html. Each restaurant listing looks like this: <li class="vcard"> <h3><a class="fn org url" href="http://www.riddleandfinns.co.uk/">Riddle & Finns</a></h3> <div class="adr"> <p class="street-address">12b Meeting House Lane</p> <p><span class="locality">Brighton</span>, <abbr class="country-name" title="United Kingdom">UK</abbr></p> <p class="postal-code">BN1 1HB</p> </div> <p>Telephone: <span class="tel">+44 (0)1273 323 008</span></p> <p>E-mail: <a href="mailto:info@riddleandfinns.co.uk" class="email">info@ri… | 2007 | Simon Willison | simonwillison | 2007-12-12T00:00:00+00:00 | https://24ways.org/2007/unobtrusively-mapping-microformats-with-jquery/ | code |
| 283 | 283 | CSS3 Patterns, Explained | Many of you have probably seen my CSS3 patterns gallery. It became very popular throughout the year and it showed many web developers how powerful CSS3 gradients really are. But how many really understand how these patterns are created? The biggest benefit of CSS-generated backgrounds is that they can be modified directly within the style sheet. This benefit is void if we are just copying and pasting CSS code we don’t understand. We may as well use a data URI instead. Important note In all the examples that follow, I’ll be using gradients without a vendor prefix, for readability and brevity. However, you should keep in mind that in reality you need to use all the vendor prefixes (-moz-, -ms-, -o-, -webkit-) as no browser currently implements them without a prefix. Alternatively, you could use -prefix-free and have the current vendor prefix prepended at runtime, only when needed. The syntax described here is the one that browsers currently implement. The specification has since changed, but no browser implements the changes yet. If you are interested in what is coming, I suggest you take a look at the dev version of the spec. If you are not yet familiar with CSS gradients, you can read these excellent tutorials by John Allsopp and return here later, as in the rest of the article I assume you already know the CSS gradient basics: CSS3 Linear Gradients CSS3 Radial Gradients The main idea I’m sure most of you can imagine the background this code generates: background: linear-gradient(left, white 20%, #8b0 80%); It’s a simple gradient from one color to another that looks like this: See this example live As you probably know, in this case the first 20% of the container’s width is solid white and the last 20% is solid green. The other 60% is a smooth gradient between these colors. Let’s try moving these color stops closer to each other: background: linear-gradient(left, white 30%, #8b0 70%); See this example live background: linear-gradient(left, white 40%, #8b0 60%); See this example live backgro… | 2011 | Lea Verou | leaverou | 2011-12-16T00:00:00+00:00 | https://24ways.org/2011/css3-patterns-explained/ | code |
| 83 | 83 | Cut Copy Paste | Long before I got into this design thing, I was heavily into making my own music inspired by the likes of Coldcut and Steinski. I would scour local second-hand record shops in search of obscure beats, loops and bits of dialogue in the hope of finding that killer sample I could then splice together with other things to make a huge hit that everyone would love. While it did eventually lead to a record contract and getting to release a few 12″ singles, ultimately I knew I’d have to look for something else to pay the bills. I may not make my own records any more, but the approach I took back then – finding (even stealing) things, cutting and pasting them into interesting combinations – is still at the centre of how I work, only these days it’s pretty much bits of code rather than bits of vinyl. Over the years I’ve stored these little bits of code (some I’ve found, some I’ve created myself) in Evernote, ready to be dialled up whenever I need them. So when Drew got in touch and asked if I’d like to do something for this year’s 24 ways I thought it might be kind of cool to share with you a few of these snippets that I find really useful. Think of these as a kind of coding mix tape; but remember – don’t just copy as is: play around, combine and remix them into other wonderful things. Some of this stuff is dirty; some of it will make hardcore programmers feel ill. For those people, remember this – while you were complaining about the syntax, I made something. Create unique colours Let’s start right away with something I stole. Well, actually it was given away at the time by Matt Biddulph who was then at Dopplr before Nokia destroyed it. Imagine you have thousands of words and you want to assign each one a unique colour. Well, Matt came up with a crazily simple but effective way to do that using an MD5 hash. Just encode said word using an MD5 hash, then take the first six characters of the string you get back to create a hexadecimal colour representation. I can’t guarantee that it will be a harmonious colour palet… | 2012 | Brendan Dawes | brendandawes | 2012-12-17T00:00:00+00:00 | https://24ways.org/2012/cut-copy-paste/ | code |
| 307 | 307 | Get the Balance Right: Responsive Display Text | Last year in 24 ways I urged you to Get Expressive with Your Typography. I made the case for grabbing your readers’ attention by setting text at display sizes, that is to say big. You should consider very large text in the same way you might a hero image: a picture that creates an atmosphere and anchors your layout. When setting text to be read, it is best practice to choose body and subheading sizes from a pre-defined scale appropriate to the viewport dimensions. We set those sizes using rems, locking the text sizes together so they all scale according to the page default and your reader’s preferences. You can take the same approach with display text by choosing larger sizes from the same scale. However, display text, as defined by its purpose and relative size, is text to be seen first, and read second. In other words a picture of text. When it comes to pictures, you are likely to scale all scene-setting imagery - cover photos, hero images, and so on - relative to the viewport. Take the same approach with display text: lock the size and shape of the text to the screen or browser window. Introducing viewport units With CSS3 came a new set of units which are locked to the viewport. You can use these viewport units wherever you might otherwise use any other unit of length such as pixels, ems or percentage. There are four viewport units, and in each case a value of 1 is equal to 1% of either the viewport width or height as reported in reference1 pixels: vw - viewport width, vh - viewport height, vmin - viewport height or width, whichever is smaller vmax - viewport height or width, whichever is larger In one fell swoop you can set the size of a display heading to be proportional to the screen or browser width, rather than choosing from a scale in a series of media queries. The following makes the heading font size 13% of the viewport width: h1 { font-size: 13 vw; } So for a selection of widths, the rendered font size would be: Rendered font size (px) Viewport width 13 vw 320 42 768 100 1024 133 1280 166 1920 … | 2016 | Richard Rutter | richardrutter | 2016-12-09T00:00:00+00:00 | https://24ways.org/2016/responsive-display-text/ | code |
| 234 | 234 | An Introduction to CSS 3-D Transforms | Ladies and gentlemen, it is the second decade of the third millennium and we are still kicking around the same 2-D interface we got three decades ago. Sure, Apple debuted a few apps for OSX 10.7 that have a couple more 3-D flourishes, and Microsoft has had that Flip 3D for a while. But c’mon – 2011 is right around the corner. That’s Twenty Eleven, folks. Where is our 3-D virtual reality? By now, we should be zipping around the Metaverse on super-sonic motorbikes. Granted, the capability of rendering complex 3-D environments has been present for years. On the web, there are already several solutions: Flash; three.js in <canvas>; and, eventually, WebGL. Finally, we meagre front-end developers have our own three-dimensional jewel: CSS 3-D transforms! Rationale Like a beautiful jewel, 3-D transforms can be dazzling, a true spectacle to behold. But before we start tacking 3-D diamonds and rubies to our compositions like Liberace‘s tailor, we owe it to our users to ask how they can benefit from this awesome feature. An entire application should not take advantage of 3-D transforms. CSS was built to style documents, not generate explorable environments. I fail to find a benefit to completing a web form that can be accessed by swivelling my viewport to the Sign-Up Room (although there have been proposals to make the web just that). Nevertheless, there are plenty of opportunities to use 3-D transforms in between interactions with the interface, via transitions. Take, for instance, the Weather App on the iPhone. The application uses two views: a details view; and an options view. Switching between these two views is done with a 3-D flip transition. This informs the user that the interface has two – and only two – views, as they can exist only on either side of the same plane. Flipping from details view to options view via a 3-D transition Also, consider slide shows. When you’re looking at the last slide, what cues tip you off that advancing will restart the cycle at the first slide? A better paradigm might be achi… | 2010 | David DeSandro | daviddesandro | 2010-12-14T00:00:00+00:00 | https://24ways.org/2010/intro-to-css-3d-transforms/ | code |
| 63 | 63 | Be Fluid with Your Design Skills: Build Your Own Sites | Just five years ago in 2010, when we were all busy trying to surprise and delight, learning CSS3 and trying to get whole websites onto one page, we had a poster on our studio wall. It was entitled ‘Designers Vs Developers’, an infographic that showed us the differences between the men(!) who created websites. Designers wore skinny jeans and used Macs and developers wore cargo pants and brought their own keyboards to work. We began to learn that designers and developers were not only doing completely different jobs but were completely different people in every way. This opinion was backed up by hundreds of memes, millions of tweets and pages of articles which used words like void and battle and versus. Thankfully, things move quickly in this industry; the wide world of web design has moved on in the last five years. There are new devices, technologies, tools – and even a few women. Designers have been helped along by great apps, software, open source projects, conferences, and a community of people who, to my unending pride, love to share their knowledge and their work. So the world has moved on, and if Miley Cyrus, Ruby Rose and Eliot Sumner are identifying as gender fluid (an identity which refers to a gender which varies over time or is a combination of identities), then I would like to come out as discipline fluid! OK, I will probably never identify as a developer, but I will identify as fluid! How can we be anything else in an industry that moves so quickly? That’s how we should think of our skills, our interests and even our job titles. After all, Steve Jobs told us that “Design is not just what it looks like and feels like. Design is how it works.” Sorry skinny-jean-wearing designers – this means we’re all designing something together. And it’s not just about knowing the right words to use: you have to know how it feels. How it feels when you make something work, when you fix that bug, when you make it work on IE. Like anything in life, things run smoothly when you make the effort to share experiences, em… | 2015 | Ros Horner | roshorner | 2015-12-12T00:00:00+00:00 | https://24ways.org/2015/be-fluid-with-your-design-skills-build-your-own-sites/ | code |
| 11 | 11 | JavaScript: Taking Off the Training Wheels | JavaScript is the third pillar of front-end web development. Of those pillars, it is both the most powerful and the most complex, so it’s understandable that when 24 ways asked, “What one thing do you wish you had more time to learn about?”, a number of you answered “JavaScript!” This article aims to help you feel happy writing JavaScript, and maybe even without libraries like jQuery. I can’t comprehensively explain JavaScript itself without writing a book, but I hope this serves as a springboard from which you can jump to other great resources. Why learn JavaScript? So what’s in it for you? Why take the next step and learn the fundamentals? Confidence with jQuery If nothing else, learning JavaScript will improve your jQuery code; you’ll be comfortable writing jQuery from scratch and feel happy bending others’ code to your own purposes. Writing efficient, fast and bug-free jQuery is also made much easier when you have a good appreciation of JavaScript, because you can look at what jQuery is really doing. Understanding how JavaScript works lets you write better jQuery because you know what it’s doing behind the scenes. When you need to leave the beaten track, you can do so with confidence. In fact, you could say that jQuery’s ultimate goal is not to exist: it was invented at a time when web APIs were very inconsistent and hard to work with. That’s slowly changing as new APIs are introduced, and hopefully there will come a time when jQuery isn’t needed. An example of one such change is the introduction of the very useful document.querySelectorAll. Like jQuery, it converts a CSS selector into a list of matching elements. Here’s a comparison of some jQuery code and the equivalent without. $('.counter').each(function (index) { $(this).text(index + 1); }); var counters = document.querySelectorAll('.counter'); [].slice.call(counters).forEach(function (elem, index) { elem.textContent = index + 1; }); Solving problems no one else has! When you have to go to the internet to solve a problem, you’re forever st… | 2013 | Tom Ashworth | tomashworth | 2013-12-05T00:00:00+00:00 | https://24ways.org/2013/javascript-taking-off-the-training-wheels/ | code |
| 326 | 326 | Don't be eval() | JavaScript is an interpreted language, and like so many of its peers it includes the all powerful eval() function. eval() takes a string and executes it as if it were regular JavaScript code. It’s incredibly powerful and incredibly easy to abuse in ways that make your code slower and harder to maintain. As a general rule, if you’re using eval() there’s probably something wrong with your design. Common mistakes Here’s the classic misuse of eval(). You have a JavaScript object, foo, and you want to access a property on it – but you don’t know the name of the property until runtime. Here’s how NOT to do it: var property = 'bar'; var value = eval('foo.' + property); Yes it will work, but every time that piece of code runs JavaScript will have to kick back in to interpreter mode, slowing down your app. It’s also dirt ugly. Here’s the right way of doing the above: var property = 'bar'; var value = foo[property]; In JavaScript, square brackets act as an alternative to lookups using a dot. The only difference is that square bracket syntax expects a string. Security issues In any programming language you should be extremely cautious of executing code from an untrusted source. The same is true for JavaScript – you should be extremely cautious of running eval() against any code that may have been tampered with – for example, strings taken from the page query string. Executing untrusted code can leave you vulnerable to cross-site scripting attacks. What’s it good for? Some programmers say that eval() is B.A.D. – Broken As Designed – and should be removed from the language. However, there are some places in which it can dramatically simplify your code. A great example is for use with XMLHttpRequest, a component of the set of tools more popularly known as Ajax. XMLHttpRequest lets you make a call back to the server from JavaScript without refreshing the whole page. A simple way of using this is to have the server return JavaScript code which is then passed to eval(). Here is a simple function for doing exactly that … | 2005 | Simon Willison | simonwillison | 2005-12-07T00:00:00+00:00 | https://24ways.org/2005/dont-be-eval/ | code |
| 37 | 37 | JavaScript Modules the ES6 Way | JavaScript admittedly has plenty of flaws, but one of the largest and most prominent is the lack of a module system: a way to split up your application into a series of smaller files that can depend on each other to function correctly. This is something nearly all other languages come with out of the box, whether it be Ruby’s require, Python’s import, or any other language you’re familiar with. Even CSS has @import! JavaScript has nothing of that sort, and this has caused problems for application developers as they go from working with small websites to full client-side applications. Let’s be clear: it doesn’t mean the new module system in the upcoming version of JavaScript won’t be useful to you if you’re building smaller websites rather than the next Instagram. Thankfully, the lack of a module system will soon be a problem of the past. The next version of JavaScript, ECMAScript 6, will bring with it a full-featured module and dependency management solution for JavaScript. The bad news is that it won’t be landing in browsers for a while yet – but the good news is that the specification for the module system and how it will look has been finalised. The even better news is that there are tools available to get it all working in browsers today without too much hassle. In this post I’d like to give you the gift of JS modules and show you the syntax, and how to use them in browsers today. It’s much simpler than you might think. What is ES6? ECMAScript is a scripting language that is standardised by a company called Ecma International. JavaScript is an implementation of ECMAScript. ECMAScript 6 is simply the next version of the ECMAScript standard and, hence, the next version of JavaScript. The spec aims to be fully comfirmed and complete by the end of 2014, with a target initial release date of June 2015. It’s impossible to know when we will have full feature support across the most popular browsers, but already some ES6 features are landing in the latest builds of Chrome and Firefox. You shouldn’t expect to be… | 2014 | Jack Franklin | jackfranklin | 2014-12-03T00:00:00+00:00 | https://24ways.org/2014/javascript-modules-the-es6-way/ | code |
| 193 | 193 | Web Content Accessibility Guidelines—for People Who Haven't Read Them | I’ve been a huge fan of the Web Content Accessibility Guidelines 2.0 since the World Wide Web Consortium (W3C) published them, nine years ago. I’ve found them practical and future-proof, and I’ve found that they can save a huge amount of time for designers and developers. You can apply them to anything that you can open in a browser. My favourite part is when I use the guidelines to make a website accessible, and then attend user-testing and see someone with a disability easily using that website. Today, the United Nations International Day of Persons with Disabilities, seems like a good time to re-read Laura Kalbag’s explanation of why we should bother with accessibility. That should motivate you to devour this article. If you haven’t read the Web Content Accessibility Guidelines 2.0, you might find them a bit off-putting at first. The editors needed to create a single standard that countries around the world could refer to in legislation, and so some of the language in the guidelines reads like legalese. The editors also needed to future-proof the guidelines, and so some terminology—such as “time-based media” and “programmatically determined”—can sound ambiguous. The guidelines can seem lengthy, too: printing the guidelines, the Understanding WCAG 2.0 document, and the Techniques for WCAG 2.0 document would take 1,200 printed pages. This festive season, let’s rip off that legalese and ambiguous terminology like wrapping paper, and see—in a single article—what gifts the Web Content Accessibility Guidelines 2.0 editors have bestowed upon us. Can your users perceive the information on your website? The first guideline has criteria that help you prevent your users from asking “What the **** is this thing here supposed to be?” 1.1.1 Text is the most accessible format for information. Screen readers—such as the “VoiceOver” setting on your iPhone or the “TalkBack” app on your Android phone—understand text better than any other format. The same applies for other assistive technology, such as translation apps and Braill… | 2017 | Alan Dalton | alandalton | 2017-12-03T00:00:00+00:00 | https://24ways.org/2017/wcag-for-people-who-havent-read-them/ | code |
| 180 | 180 | Going Nuts with CSS Transitions | I’m going to show you how CSS 3 transforms and WebKit transitions can add zing to the way you present images on your site. Laying the foundations First we are going to make our images look like mini polaroids with captions. Here’s the markup: <div class="polaroid pull-right"> <img src="../img/seal.jpg" alt=""> <p class="caption">Found this little cutie on a walk in New Zealand!</p> </div> You’ll notice we’re using a somewhat presentational class of pull-right here. This means the logic is kept separate from the code that applies the polaroid effect. The polaroid class has no positioning, which allows it to be used generically anywhere that the effect is required. The pull classes set a float and add appropriate margins—they can be used for things like blockquotes as well. .polaroid { width: 150px; padding: 10px 10px 20px 10px; border: 1px solid #BFBFBF; background-color: white; -webkit-box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4); -moz-box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4); box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4); } The actual polaroid effect itself is simply applied using padding, a border and a background colour. We also apply a nice subtle box shadow, using a property that is supported by modern WebKit browsers and Firefox 3.5+. We include the box-shadow property last to ensure that future browsers that support the eventual CSS3 specified version natively will use that implementation over the legacy browser specific version. The box-shadow property takes four values: three lengths and a colour. The first is the horizontal offset of the shadow—positive values place the shadow on the right, while negative values place it to the left. The second is the vertical offset, positive meaning below. If both of these are set to 0, the shadow is positioned equally on all four sides. The last length value sets the blur radius—the larger the number, the blurrier the shadow (therefore the darker you need to make the colour to have an effect). The colour value can be given in any forma… | 2009 | Natalie Downe | nataliedowne | 2009-12-14T00:00:00+00:00 | https://24ways.org/2009/going-nuts-with-css-transitions/ | code |
| 292 | 292 | Watch Your Language! | I’m bilingual. My first language is French. I learned English in my early 20s. Learning a new language later in life meant that I was able to observe my thought processes changing over time. It made me realize that some concepts can’t be expressed in some languages, while other languages express these concepts with ease. It also helped me understand the way we label languages. English: business. French: romance. Here’s an example of how words, or the absence thereof, can affect the way we think: In French we love everything. There’s no straightforward way to say we like something, so we just end up loving everything. I love my sisters, I love broccoli, I love programming, I love my partner, I love doing laundry (this is a lie), I love my mom (this is not a lie). I love, I love, I love. It’s no wonder French is considered romantic. When I first learned English I used the word love rather than like because I hadn’t grasped the difference. Needless to say, I’ve scared away plenty of first dates! Learning another language made me realize the limitations of my native language and revealed concepts I didn’t know existed. Without the nuances a given language provides, we fail to express what we really think. The absence of words in our vocabulary gets in the way of effectively communicating and considering ideas. When I lived in Montréal, most people in my circle spoke both French and English. I could switch between them when I could more easily express an idea in one language or the other. I liked (or should I say loved?) those conversations. They were meaningful. They were efficient. I’m quadrilingual. I code in Ruby, HTML/CSS, JavaScript, Python. In the past couple of years I have been lucky enough to write code in these languages at a massive scale. In learning Ruby, much like learning English, I discovered the strengths and limitations of not only the languages I knew but the language I was learning. It taught me to choose the right tool for the job. When I started working at Shopify, making a change to a view inv… | 2016 | Annie-Claude Côté | annieclaudecote | 2016-12-10T00:00:00+00:00 | https://24ways.org/2016/watch-your-language/ | code |
| 258 | 258 | Mistletoe Offline | It’s that time of year, when we gather together as families to celebrate the life of the greatest person in history. This man walked the Earth long before us, but he left behind words of wisdom. Those words can guide us every single day, but they are at the forefront of our minds during this special season. I am, of course, talking about Murphy, and the golden rule he gave unto us: Anything that can go wrong will go wrong. So true! I mean, that’s why we make sure we’ve got nice 404 pages. It’s not that we want people to ever get served a File Not Found message, but we acknowledge that, despite our best efforts, it’s bound to happen sometime. Murphy’s Law, innit? But there are some Murphyesque situations where even your lovingly crafted 404 page won’t help. What if your web server is down? What if someone is trying to reach your site but they lose their internet connection? These are all things than can—and will—go wrong. I guess there’s nothing we can do about those particular situations, right? Wrong! A service worker is a Murphy-battling technology that you can inject into a visitor’s device from your website. Once it’s installed, it can intercept any requests made to your domain. If anything goes wrong with a request—as is inevitable—you can provide instructions for the browser. That’s your opportunity to turn those server outage frowns upside down. Take those network connection lemons and make network connection lemonade. If you’ve got a custom 404 page, why not make a custom offline page too? Get your server in order Step one is to make …actually, wait. There’s a step before that. Step zero. Get your site running on HTTPS, if it isn’t already. You won’t be able to use a service worker unless everything’s being served over HTTPS, which makes sense when you consider the awesome power that a service worker wields. If you’re developing locally, service workers will work fine for localhost, even without HTTPS. But for a live site, HTTPS is a must. Make an offline page Alright, assuming your site is being served… | 2018 | Jeremy Keith | jeremykeith | 2018-12-04T00:00:00+00:00 | https://24ways.org/2018/mistletoe-offline/ | code |
| 64 | 64 | Being Responsive to the Small Things | It’s that time of the year again to trim the tree with decorations. Or maybe a DOM tree? Any web page is made of HTML elements that lay themselves out in a tree structure. We start at the top and then have multiple branches with branches that branch out from there. To decorate our tree, we use CSS to specify which branches should receive the tinsel we wish to adorn upon it. It’s all so lovely. In years past, this was rather straightforward. But these days, our trees need to be versatile. They need to be responsive! Responsive web design is pretty wonderful, isn’t it? Based on our viewport, we can decide how elements on the page should change their appearance to accommodate various constraints using media queries. Clearleft have a delightfully clean and responsive site Alas, it’s not all sunshine, lollipops, and rainbows. With complex layouts, we may have design chunks — let’s call them components — that appear in different contexts. Each context may end up providing its own constraints on the design, both in its default state and in its possibly various responsive states. Media queries, however, limit us to the context of the entire viewport, not individual containers on the page. For every container our component lives in, we need to specify how to rearrange things in that context. The more complex the system, the more contexts we need to write code for. @media (min-width: 800px) { .features > .component { } .sidebar > .component {} .grid > .component {} } Each new component and each new breakpoint just makes the entire system that much more difficult to maintain. @media (min-width: 600px) { .features > .component { } .grid > .component {} } @media (min-width: 800px) { .features > .component { } .sidebar > .component {} .grid > .component {} } @media (min-width: 1024px) { .features > .component { } } Enter container queries Container queries, also known as element queries, allow you to specify conditional CSS based on the width (or maybe height) of the container that an element lives in.… | 2015 | Jonathan Snook | jonathansnook | 2015-12-19T00:00:00+00:00 | https://24ways.org/2015/being-responsive-to-the-small-things/ | code |
| 246 | 246 | Designing Your Site Like It’s 1998 | It’s 20 years to the day since my wife and I started Stuff & Nonsense, our little studio and my outlet for creative ideas on the web. To celebrate this anniversary—and my fourteenth contribution to 24 ways— I’d like to explain how I would’ve developed a design for Planes, Trains and Automobiles, one of my favourite Christmas films. My design for Planes, Trains and Automobiles is fixed at 800px wide. Developing a <frameset> framework I’ll start by using frames to set up the framework for this new website. Frames are individual pages—one for navigation, the other for my content—pulled together to form a frameset. Space is limited on lower-resolution screens, so by using frames I can ensure my navigation always remains visible. I can include any number of frames inside a <frameset> element. I add two rows to my <frameset>; the first is for my navigation and is 50px tall, the second is for my content and will resize to fill any available space. As I don’t want frame borders or any space between my frames, I set frameborder and framespacing attributes to 0: <frameset frameborder="0" framespacing="0" rows="50,*"> […] </frameset> Next I add the source of my two frame documents. I don’t want people to be able to resize or scroll my navigation, so I add the noresize attribute to that frame: <frameset frameborder="0" framespacing="0" rows="50,*"> <frame noresize scrolling="no" src="nav.html"> <frame src="content.html"> </frameset> I do want links from my navigation to open in the content frame, so I give each <frame> a name so I can specify where I want links to open: <frameset frameborder="0" framespacing="0" rows="50,*"> <frame name="navigation" noresize scrolling="no" src="nav.html"> <frame name="content" src="content.html"> </frameset> The framework for this website is simple as it contains only two horizontal rows. Should I need a more complex layout, I can nest as many framesets—and as many individual documents—as I need: <frameset rows="50,*"> <frame name="navigation"> <frameset cols="25%,*"> <frame name="sideba… | 2018 | Andy Clarke | andyclarke | 2018-12-23T00:00:00+00:00 | https://24ways.org/2018/designing-your-site-like-its-1998/ | code |
| 177 | 177 | HTML5: Tool of Satan, or Yule of Santa? | It would lead to unseasonal arguments to discuss the title of this piece here, and the arguments are as indigestible as the fourth turkey curry of the season, so we’ll restrict our article to the practical rather than the philosophical: what HTML5 can you reasonably expect to be able to use reliably cross-browser in the early months of 2010? The answer is that you can use more than you might think, due to the seasonal tinsel of feature-detection and using the sparkly pixie-dust of IE-only VML (but used in a way that won’t damage your Elf). Canvas canvas is a 2D drawing API that defines a blank area of the screen of arbitrary size, and allows you to draw on it using JavaScript. The pictures can be animated, such as in this canvas mashup of Wolfenstein 3D and Flickr. (The difference between canvas and SVG is that SVG uses vector graphics, so is infinitely scalable. It also keeps a DOM, whereas canvas is just pixels so you have to do all your own book-keeping yourself in JavaScript if you want to know where aliens are on screen, or do collision detection.) Previously, you needed to do this using Adobe Flash or Java applets, requiring plugins and potentially compromising keyboard accessibility. Canvas drawing is supported now in Opera, Safari, Chrome and Firefox. The reindeer in the corner is, of course, Internet Explorer, which currently has zero support for canvas (or SVG, come to that). Now, don’t pull a face like all you’ve found in your Yuletide stocking is a mouldy satsuma and a couple of nuts—that’s not the end of the story. Canvas was originally an Apple proprietary technology, and Internet Explorer had a similar one called Vector Markup Language which was submitted to the W3C for standardisation in 1998 but which, unlike canvas, was not blessed with retrospective standardisation. What you need, then, is some way for Internet Explorer to translate canvas to VML on-the-fly, while leaving the other, more standards-compliant browsers to use the HTML5. And such a way exists—it’s a JavaScript library called … | 2009 | Bruce Lawson | brucelawson | 2009-12-05T00:00:00+00:00 | https://24ways.org/2009/html5-tool-of-satan-or-yule-of-santa/ | code |
| 20 | 20 | Make Your Browser Dance | It was a crisp winter’s evening when I pulled up alongside the pier. I stepped out of my car and the bitterly cold sea air hit my face. I walked around to the boot, opened it and heaved out a heavy flight case. I slammed the boot shut, locked the car and started walking towards the venue. This was it. My first gig. I thought about all those weeks of preparation: editing video clips, creating 3-D objects, making coloured patterns, then importing them all into software and configuring effects to change as the music did; targeting frequency, beat, velocity, modifying size, colour, starting point; creating playlists of these… and working out ways to mix them as the music played. This was it. This was me VJing. This was all a lifetime (well a decade!) ago. When I started web designing, VJing took a back seat. I was more interested in interactive layouts, semantic accessible HTML, learning all the IE bugs and mastering the quirks that CSS has to offer. More recently, I have been excited by background gradients, 3-D transforms, the @keyframe directive, as well as new APIs such as getUserMedia, indexedDB, the Web Audio API But wait, have I just come full circle? Could it be possible, with these wonderful new things in technologies I am already familiar with, that I could VJ again, right here, in a browser? Well, there’s only one thing to do: let’s try it! Let’s take to the dance floor Over the past couple of years working in The Lab I have learned to take a much more iterative approach to projects than before. One of my new favourite methods of working is to create a proof of concept to make sure my theory is feasible, before going on to create a full-blown product. So let’s take the same approach here. The main VJing functionality I want to recreate is manipulating visuals in relation to sound. So for my POC I need to create a visual, with parameters that can be changed, then get some sound and see if I can analyse that sound to detect some data, which I can then use to manipulate the visual parameters. Easy, … | 2013 | Ruth John | ruthjohn | 2013-12-02T00:00:00+00:00 | https://24ways.org/2013/make-your-browser-dance/ | code |
| 321 | 321 | Tables with Style | It might not seem like it but styling tabular data can be a lot of fun. From a semantic point of view, there are plenty of elements to tie some style into. You have cells, rows, row groups and, of course, the table element itself. Adding CSS to a paragraph just isn’t as exciting. Where do I start? First, if you have some tabular data (you know, like a spreadsheet with rows and columns) that you’d like to spiffy up, pop it into a table — it’s rightful place! To add more semantics to your table — and coincidentally to add more hooks for CSS — break up your table into row groups. There are three types of row groups: the header (thead), the body (tbody) and the footer (tfoot). You can only have one header and one footer but you can have as many table bodies as is appropriate. Sample table example Inspiration Table Striping To improve scanning information within a table, a common technique is to style alternating rows. Also known as zebra tables. Whether you apply it using a class on every other row or turn to JavaScript to accomplish the task, a handy-dandy trick is to use a semi-transparent PNG as your background image. This is especially useful over patterned backgrounds. tbody tr.odd td { background:transparent url(background.png) repeat top left; } * html tbody tr.odd td { background:#C00; filter: progid:DXImageTransform.Microsoft.AlphaImageLoader( src='background.png', sizingMethod='scale'); } We turn off the default background and apply our PNG hack to have this work in Internet Explorer. Styling Columns Did you know you could style a column? That’s right. You can add special column (col) or column group (colgroup) elements. With that you can add border or background styles to the column. <table> <col id="ingredients"> <col id="serve12"> <col id="serve24"> ... Check out the example. Fun with Backgrounds Pop in a tiled background to give your table some character! Internet Explorer’s PNG hack unfortunately only works well when applied to a cell. To f… | 2005 | Jonathan Snook | jonathansnook | 2005-12-19T00:00:00+00:00 | https://24ways.org/2005/tables-with-style/ | code |
| 116 | 116 | The IE6 Equation | It is the destiny of one browser to serve as the nemesis of web developers everywhere. At the birth of the Web Standards movement, that role was played by Netscape Navigator 4; an outdated browser that refused to die. Its tenacious existence hampered the adoption of modern standards. Today that role is played by Internet Explorer 6. There’s a sensation that I’m sure you’re familiar with. It’s a horrible mixture of dread and nervousness. It’s the feeling you get when—after working on a design for a while in a standards-compliant browser like Firefox, Safari or Opera—you decide that you can no longer put off the inevitable moment when you must check the site in IE6. Fingers are crossed, prayers are muttered, but alas, to no avail. The nemesis browser invariably screws something up. What do you do next? If the differences in IE6 are minor, you could just leave it be. After all, websites don’t need to look exactly the same in all browsers. But if there are major layout issues and a significant portion of your audience is still using IE6, you’ll probably need to roll up your sleeves and start fixing the problems. A common approach is to quarantine IE6-specific CSS in a separate stylesheet. This stylesheet can then be referenced from the HTML document using conditional comments like this: <!--[if lt IE 7]> <link rel="stylesheet" href="ie6.css" type="text/css" media="screen" /> <![endif]--> That stylesheet will only be served up to Internet Explorer where the version number is less than 7. You can put anything inside a conditional comment. You could put a script element in there. So as well as serving up browser-specific CSS, it’s possible to serve up browser-specific JavaScript. A few years back, before Microsoft released Internet Explorer 7, JavaScript genius Dean Edwards wrote a script called IE7. This amazing piece of code uses JavaScript to make Internet Explorer 5 and 6 behave like a standards-compliant browser. Dean used JavaScript to bootstrap IE’s CSS support. Because the script is specifically targeted… | 2008 | Jeremy Keith | jeremykeith | 2008-12-08T00:00:00+00:00 | https://24ways.org/2008/the-ie6-equation/ | code |
| 186 | 186 | The Web Is Your CMS | It is amazing what you can do these days with the services offered on the web. Flickr stores terabytes of photos for us and converts them automatically to all kind of sizes, finds people in them and even allows us to edit them online. YouTube does almost the same complete job with videos, LinkedIn allows us to maintain our CV, Delicious our bookmarks and so on. We don’t have to do these tasks ourselves any more, as all of these systems also come with ways to use the data in the form of Application Programming Interfaces, or APIs for short. APIs give us raw data when we send requests telling the system what we want to get back. The problem is that every API has a different idea of what is a simple way of accessing this data and in which format to give it back. Making it easier to access APIs What we need is a way to abstract the pains of different data formats and authentication formats away from the developer — and this is the purpose of the Yahoo Query Language, or YQL for short. Libraries like jQuery and YUI make it easy and reliable to use JavaScript in browsers (yes, even IE6) and YQL allows us to access web services and even the data embedded in web documents in a simple fashion – SQL style. Select * from the web and filter it the way I want YQL is a web service that takes a few inputs itself: A query that tells it what to get, update or access An output format – XML, JSON, JSON-P or JSON-P-X A callback function (if you defined JSON-P or JSON-P-X) You can try it out yourself – check out this link to get back Flickr photos for the search term ‘santa’*%20from%20flickr.photos.search%20where%20text%3D%22santa%22&format=xml in XML format. The YQL query for this is select * from flickr.photos.search where text="santa" The easiest way to take your first steps with YQL is to look at the console. There you get sample queries, access to all the data sources available to you and you can easily put together complex queries. In this article, however, let’s use PHP to put together a web page that pulls i… | 2009 | Christian Heilmann | chrisheilmann | 2009-12-17T00:00:00+00:00 | https://24ways.org/2009/the-web-is-your-cms/ | code |
| 214 | 214 | Christmas Gifts for Your Future Self: Testing the Web Platform | In the last year I became a CSS specification editor, on a mission to revitalise CSS Multi-column layout. This has involved learning about many things, one of which has been the Web Platform Tests project. In this article, I’m going to share what I’ve learned about testing the web platform. I’m also going to explain why I think you might want to get involved too. Why test? At one time or another it is likely that you have been frustrated by an issue where you wrote some valid CSS, and one browser did one thing with it and another something else entirely. Experiences like this make many web developers feel that browser vendors don’t work together, or they are actively doing things in a different way to one another to the detriment of those of us who use the platform. You’ll be glad to know that isn’t the case, and that the people who work on browsers want things to be consistent just as much as we do. It turns out however that interoperability, which is the official term for “works in all browsers”, is hard. Thanks to web-platform-tests, a test from another browser vendor just found genuine bug in our code before we shipped 😻— Brian Birtles (@brianskold) February 10, 2017 In order for W3C Specifications to move on to become W3C Recommendations we need to have interoperable implementations. 6.2.4 Implementation Experience Implementation experience is required to show that a specification is sufficiently clear, complete, and relevant to market needs, to ensure that independent interoperable implementations of each feature of the specification will be realized. While no exhaustive list of requirements is provided here, when assessing that there is adequate implementation experience the Director will consider (though not be limited to): is each feature of the current specification implemented, and how is this demonstrated? are there independent interoperable implementations of the current specification? are there implementations created by people other than the authors of the specification? are implementations publi… | 2017 | Rachel Andrew | rachelandrew | 2017-12-10T00:00:00+00:00 | https://24ways.org/2017/testing-the-web-platform/ | code |
| 318 | 318 | Auto-Selecting Navigation | In the article Centered Tabs with CSS Ethan laid out a tabbed navigation system which can be centred on the page. A frequent requirement for any tab-based navigation is to be able to visually represent the currently selected tab in some way. If you’re using a server-side language such as PHP, it’s quite easy to write something like class="selected" into your markup, but it can be even simpler than that. Let’s take the navigation div from Ethan’s article as an example. <div id="navigation"> <ul> <li><a href="#"><span>Home</span></a></li> <li><a href="#"><span>About</span></a></li> <li><a href="#"><span>Our Work</span></a></li> <li><a href="#"><span>Products</span></a></li> <li class="last"><a href="#"><span>Contact Us</span></a></li> </ul> </div> As you can see we have a standard unordered list which is then styled with CSS to look like tabs. By giving each tab a class which describes it’s logical section of the site, if we were to then apply a class to the body tag of each page showing the same, we could write a clever CSS selector to highlight the correct tab on any given page. Sound complicated? Well, it’s not a trivial concept, but actually applying it is dead simple. Modifying the markup First thing is to place a class name on each li in the list: <div id="navigation"> <ul> <li class="home"><a href="#"><span>Home</span></a></li> <li class="about"><a href="#"><span>About</span></a></li> <li class="work"><a href="#"><span>Our Work</span></a></li> <li class="products"><a href="#"><span>Products</span></a></li> <li class="last contact"><a href="#"><span>Contact Us</span></a></li> </ul> </div> Then, on each page of your site, apply the a matching class to the body tag to indicate which section of the site that page is in. For example, on your About page: <body class="about">...</body> Writing the CSS selector You can now write a single CSS rule to match the selected tab on any give… | 2005 | Drew McLellan | drewmclellan | 2005-12-10T00:00:00+00:00 | https://24ways.org/2005/auto-selecting-navigation/ | code |
| 303 | 303 | We Need to Talk About Technical Debt | In my work with clients, a lot of time is spent assessing old, legacy, sprawling systems and identifying good code, bad code, and technical debt. One thing that constantly strikes me is the frequency with which bad code and technical debt are conflated, so let me start by saying this: Not all technical debt is bad code, and not all bad code is technical debt. Sometimes your bad code is just that: bad code. Calling it technical debt often feels like a more forgiving and friendly way of referring to what may have just been a poor implementation or a substandard piece of work. It is an oft-misunderstood phrase, and when mistaken for meaning ‘anything legacy or old hacky or nasty or bad’, technical debt is swept under the carpet along with all of the other parts of the codebase we’d rather not talk about, and therein lies the problem. We need to talk about technical debt. What We Talk About When We Talk About Technical Debt The thing that separates technical debt from the rest of the hacky code in our project is the fact that technical debt, by definition, is something that we knowingly and strategically entered into. Debt doesn’t happen by accident: debt happens when we choose to gain something otherwise-unattainable immediately in return for paying it back (with interest) later on. An Example You’re a front-end developer working on a SaaS product, and your sales team is courting a large customer – a customer so large that you can’t really afford to lose them. The customer tells you that as long as you can allow them to theme your SaaS application according to their branding, they are willing to sign on the dotted line… the problem being that your CSS architecture was never designed to incorporate theming at all, and there isn’t currently a nice, clean way to incorporate a theme into the codebase. You and the business make the decision that you will hack a theme into the product in two days. It’s going to be messy, it’s going to be ugly, but you can’t afford to lose a huge customer just because your CSS isn’t quite … | 2016 | Harry Roberts | harryroberts | 2016-12-05T00:00:00+00:00 | https://24ways.org/2016/we-need-to-talk-about-technical-debt/ | code |
| 132 | 132 | Tasty Text Trimmer | In most cases, when designing a user interface it’s best to make a decision about how data is best displayed and stick with it. Failing to make a decision ultimately leads to too many user options, which in turn can be taxing on the poor old user. Under some circumstances, however, it’s good to give the user freedom in customising their workspace. One good example of this is the ‘Article Length’ tool in Apple’s Safari RSS reader. Sliding a slider left of right dynamically changes the length of each article shown. It’s that kind of awesomey magic stuff that’s enough to keep you from sleeping. Let’s build one. The Setup Let’s take a page that has lots of long text items, a bit like a news page or like Safari’s RSS items view. If we were to attach a class name to each element we wanted to resize, that would give us something to hook onto from the JavaScript. Example 1: The basic page. As you can see, I’ve wrapped my items in a DIV and added a class name of chunk to them. It’s these chunks that we’ll be finding with the JavaScript. Speaking of which … Our Core Functions There are two main tasks that need performing in our script. The first is to find the chunks we’re going to be resizing and store their original contents away somewhere safe. We’ll need this so that if we trim the text down we’ll know what it was if the user decides they want it back again. We’ll call this loadChunks. var loadChunks = function(){ var everything = document.getElementsByTagName('*'); var i, l; chunks = []; for (i=0, l=everything.length; i<l; i++){ if (everything[i].className.indexOf(chunkClass) > -1){ chunks.push({ ref: everything[i], original: everything[i].innerHTML }); } } }; The variable chunks is stored outside of this function so that we can access it from our next core function, which is doTrim. var doTrim = function(interval) { if (!chunks) loadChunks(); var i, l; for (i=0, l=chunks.length; i<l; i++){ var a = chunks[i].original.split(' '); a = a.slice(0, interval); chunks[i].ref.inner… | 2006 | Drew McLellan | drewmclellan | 2006-12-01T00:00:00+00:00 | https://24ways.org/2006/tasty-text-trimmer/ | code |
| 260 | 260 | The Art of Mathematics: A Mandala Maker Tutorial | In front-end development, there’s often a great deal of focus on tools that aim to make our work more efficient. But what if you’re new to web development? When you’re just starting out, the amount of new material can be overwhelming, particularly if you don’t have a solid background in Computer Science. But the truth is, once you’ve learned a little bit of JavaScript, you can already make some pretty impressive things. A couple of years back, when I was learning to code, I started working on a side project. I wanted to make something colorful and fun to share with my friends. This is what my app looks like these days: Mandala Maker user interface The coolest part about it is the fact that it’s a tool: anyone can use it to create something original and brand new. In this tutorial, we’ll build a smaller version of this app – a symmetrical drawing tool in ES5, JavaScript and HTML5. The tutorial app will have eight reflections, a color picker and a Clear button. Once we’re done, you’re on your own and can tweak it as you please. Be creative! Preparations: a blank canvas The first thing you’ll need for this project is a designated drawing space. We’ll use the HTML5 canvas element and give it a width and a height of 600px (you can set the dimensions to anything else if you like). Files Create 3 files: index.html, styles.css, main.js. Don’t forget to include your JS and CSS files in your HTML. <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <link rel="stylesheet" type="text/css" href="style.css"> <script src="main.js"></script> </head> <body onload="init()"> <canvas width="600" height="600"> <p>Your browser doesn't support canvas.</p> </canvas> </body> </html> I’ll ask you to update your HTML file at a later point, but the CSS file we’ll start with will stay the same throughout the project. This is the full CSS we are going to use: body { background-color: #ccc; text-align: center; } canvas { touch-action: none; background-color: #fff; } button { font-size: 110%;… | 2018 | Hagar Shilo | hagarshilo | 2018-12-02T00:00:00+00:00 | https://24ways.org/2018/the-art-of-mathematics/ | code |
| 139 | 139 | Flickr Photos On Demand with getFlickr | In case you don’t know it yet, Flickr is great. It is a lot of fun to upload, tag and caption photos and it is really handy to get a vast network of contacts through it. Using Flickr photos outside of it is a bit of a problem though. There is a Flickr API, and you can get almost every page as an RSS feed, but in general it is a bit tricky to use Flickr photos inside your blog posts or web sites. You might not want to get into the whole API game or use a server side proxy script as you cannot retrieve RSS with Ajax because of the cross-domain security settings. However, Flickr also provides an undocumented JSON output, that can be used to hack your own solutions in JavaScript without having to use a server side script. If you enter the URL http://flickr.com/photos/tags/panda you get to the flickr page with photos tagged “panda”. If you enter the URL http://api.flickr.com/services/feeds/photos_public.gne?tags=panda&format=rss_200 you get the same page as an RSS feed. If you enter the URL http://api.flickr.com/services/feeds/photos_public.gne?tags=panda&format=json you get a JavaScript function called jsonFlickrFeed with a parameter that contains the same data in JSON format You can use this to easily hack together your own output by just providing a function with the same name. I wanted to make it easier for you, which is why I created the helper getFlickr for you to download and use. getFlickr for Non-Scripters Simply include the javascript file getflickr.js and the style getflickr.css in the head of your document: <script type="text/javascript" src="getflickr.js"></script> <link rel="stylesheet" href="getflickr.css" type="text/css"> Once this is done you can add links to Flickr pages anywhere in your document, and when you give them the CSS class getflickrphotos they get turned into gallery links. When a visitor clicks these links they turn into loading messages and show a “popup” gallery with the connected photos once they were loaded. As the JSON returned is very small it won’t take long. You can… | 2006 | Christian Heilmann | chrisheilmann | 2006-12-03T00:00:00+00:00 | https://24ways.org/2006/flickr-photos-on-demand/ | code |
| 306 | 306 | What next for CSS Grid Layout? | In 2012 I wrote an article for 24 ways detailing a new CSS Specification that had caught my eye, at the time with an implementation only in Internet Explorer. What I didn’t realise at the time was that CSS Grid Layout was to become a theme on which I would base the next four years of research, experimentation, writing and speaking. As I write this article in December 2016, we are looking forward to CSS Grid Layout being shipped in Chrome and Firefox. What will ship early next year in those browsers is expanded and improved from the early implementation I explored in 2012. Over the last four years the spec has been developed as part of the CSS Working Group process, and has had input from browser engineers, specification writers and web developers. Use cases have been discussed, and features added. The CSS Grid Layout specification is now a Candidate Recommendation. This status means the spec is to all intents and purposes, finished. The discussions now happening are on fine implementation details, and not new feature ideas. It makes sense to draw a line under a specification in order that browser vendors can ship complete, interoperable implementations. That approach is good for all of us, it makes development far easier if we know that a browser supports all of the features of a specification, rather than working out which bits are supported. However it doesn’t mean that works stops here, and that new use cases and features can’t be proposed for future levels of Grid Layout. Therefore, in this article I’m going to take a look at some of the things I think grid layout could do in the future. I would love for these thoughts to prompt you to think about how Grid - or any CSS specification - could better suit the use cases you have. Subgrid - the missing feature of Level 1 The implementation of CSS Grid Layout in Chrome, Firefox and Webkit is comparable and very feature complete. There is however one standout feature that has not been implemented in any browser as yet - subgrid. Once you set the value of the displa… | 2016 | Rachel Andrew | rachelandrew | 2016-12-12T00:00:00+00:00 | https://24ways.org/2016/what-next-for-css-grid-layout/ | code |
| 209 | 209 | Feeding the Audio Graph | In 2004, I was given an iPod. I count this as one of the most intuitive pieces of technology I’ve ever owned. It wasn’t because of the the snazzy (colour!) menus or circular touchpad. I loved how smoothly it fitted into my life. I could plug in my headphones and listen to music while I was walking around town. Then when I got home, I could plug it into an amplifier and carry on listening there. There was no faff. It didn’t matter if I could find my favourite mix tape, or if my WiFi was flakey - it was all just there. Nowadays, when I’m trying to pair my phone with some Bluetooth speakers, or can’t find my USB-to-headphone jack, or even access any music because I don’t have cellular reception; I really miss this simplicity. The Web Audio API I think the Web Audio API feels kind of like my iPod did. It’s different from most browser APIs - rather than throwing around data, or updating DOM elements - you plug together a graph of audio nodes, which the browser uses to generate, process, and play sounds. The thing I like about it is that you can totally plug it into whatever you want, and it’ll mostly just work. So, let’s get started. First of all we want an audio source. <audio src="night-owl.mp3" controls /> (Song - Night Owl by Broke For Free) This totally works. However, it’s not using the Web Audio API, so we can’t access or modify the sound it makes. To hook this up to our audio graph, we can use an AudioSourceNode. This captures the sound from the element, and lets us connect to other nodes in a graph. const audioCtx = new AudioContext() const audio = document.querySelector('audio') const input = audioCtx.createAudioSourceNode(audio) input.connect(audioCtx.destination) Great. We’ve made something that looks and sounds exactly the same as it did before. Go us. Gain Let’s plug in a GainNode - this allows you to alter the amplitude (volume) of an an audio stream. We can hook this node up to an <input> element by setting the gain property of the node. (The syntax for this is kind of weird because it’s an Au… | 2017 | Ben Foxall | benfoxall | 2017-12-17T00:00:00+00:00 | https://24ways.org/2017/feeding-the-audio-graph/ | code |
Advanced export
JSON shape: default, array, newline-delimited
CREATE TABLE [articles] (
[title] TEXT ,
[contents] TEXT ,
[year] TEXT ,
[author] TEXT ,
[author_slug] TEXT ,
[published] TEXT ,
[url] TEXT ,
[topic] TEXT
);