articles
24 rows where year = 2012 sorted by topic
This data as json, CSV (advanced)
| Link | rowid | title | contents | year | author | author_slug | published | url | topic ▼ |
|---|---|---|---|---|---|---|---|---|---|
| 87 | 87 | Content Planning Demystified | The first thing you learn as a junior editor is that you can’t do everything yourself. You must rely on someone else to do at least part of what must be done: the long-range planning, the initial drafting or shooting or recording, the editing, the production, the final polish. All of those pieces of work that belong to someone else take quite a lot of time — days, weeks, sometimes months. If you’re the sort of person who wrote college term papers the night before they were due, this can come as a bit of a shock. To my twenty-two-year-old self, it certainly did. It turns out that the only real way to avoid a trainwreck with editorial work is to get ahead of the trouble, line everything up carefully, and leave oodles of room for all the pieces to connect on time. The same is true of content strategy, content planning, and just about everything to do with content on the web, except for the writing itself — and that, too, usually takes far longer than anyone expects. If you’re not a professional editor and you suddenly find yourself dealing with content creation, you’re almost certainly going to underestimate the time and effort involved, or to skip something important in the planning process that pops up to bite you later. Without good content, it doesn’t matter how well designed or coded your web project is, because it won’t be doing the thing it’s meant to do. And even if content is far from your specialty, you may well end up being the only one willing to coordinate it far enough in advance to avoid a chaotic ending. Whether you’re hiring writers and editors for a big project, working with a small client, or coaxing some editorial help out of a co-worker, getting the planning work done correctly — and ahead of time — will allow you to orchestrate a glorious ballet of togetherness, instead of feverishly scraping together something to put on your site when the deadline looms. So get out the graph paper and the pocket protector, because we’re going to go Full Nerd on this problem. Know your poison Anyone who’s… | 2012 | Erin Kissane | erinkissane | 2012-12-20T00:00:00+00:00 | https://24ways.org/2012/content-planning-demystified/ | content |
| 73 | 73 | How to Make Your Site Look Half-Decent in Half an Hour | Programmers like me are often intimidated by design – but a little effort can give a huge return on investment. Here are one coder’s tips for making any site quickly look more professional. I am a programmer. I am not a designer. I have a degree in computer science, and I don’t mind Comic Sans. (It looks cheerful. Move on.) But although I am a programmer, I want to make my sites look attractive. This is partly out of vanity, and partly realism. Vanity because I want people to think my work is good, and realism because the research shows that people won’t think a site is credible unless it also looks attractive. For a very long time after I became a programmer, I was scared of design. Design seemed to consist of complicated rules that weren’t written down anywhere, plus an unlearnable sense of taste, possessed only by a black-clad elite. But a little while ago, I decided to do my best to hack what it took to make my own projects look vaguely attractive. And although this doesn’t come close to the effect a professional designer could achieve, gathering these resources for improving a site’s look and feel has been really helpful. If I hadn’t figured out some basic design shortcuts, it’s unlikely that a weekend hack of mine would have ended up on page three of the Daily Mail. And too often now, I see excellent programming projects that don’t reach the audience they deserve, simply because their design doesn’t match their execution. So, if you are a developer, my Christmas present to you is this: my own collection of hacks that, used rightly, can make your personal programming projects look professional, quickly. None are hard to learn, most are free, and they let you focus on writing code. One thing to note about these tips, though. They are a personal, pragmatic compilation. They are suggestions, not a definitive guide. You will definitely get better results by working with a professional designer, and by studying design more deeply. If you are a designer, I would love to hear your suggestions for the b… | 2012 | Anna Powell-Smith | annapowellsmith | 2012-12-16T00:00:00+00:00 | https://24ways.org/2012/how-to-make-your-site-look-half-decent/ | design |
| 74 | 74 | Should We Be Reactive? | Evolution Looking at the evolution of the web and the devices we use should help remind us that the times we’re adjusting to are just another step on a journey. These times seem to be telling us that we need to embrace flexibility. Imagine an HTML file containing nothing but text. It’s viewable on any web-capable device and reasonably readable: the notion of the universality of the web was very much a founding principle. Right from the beginning, browser vendors understood that we’d want text to reflow (why wouldn’t we?), so I consider the first websites to have been fluid. As we attempted to exert more control through our designs in the early days of the web, debates about whether we should produce fixed or fluid sites raged. We could create fluid designs using tables, but what we didn’t have then was a wide range of web capable devices or the ability to control this fluidity. The biggest changes occurred when stats showed enough people using a different screen resolution we could cater for. To me, the techniques of responsive web design provide the control we were missing. Combining new approaches to layout and images with media queries empowered us to learn how to embrace the inherent flexibility of the web in ways to suit our work and the devices used by our audience. Perhaps another kind of flexibility might be found in how we use context to affect how we present our content; to consider how we might use the information we can access from people, browsers and devices to provide web experiences – effectively creating sites that react to initial or changing circumstances in the relationship between people and our content. Embracing flexibility So what is context? Put simply, you could think of it as a secondary piece of information that helps clarify the meaning of the first. It helps set a scene or describe circumstances. I think that Cennydd Bowles has summed it up really well through talks he’s given recently, in which he’s arrived at the acronym DETAILS (Device, Environment, Time, Activity, Individ… | 2012 | Dan Donald | dandonald | 2012-12-09T00:00:00+00:00 | https://24ways.org/2012/should-we-be-reactive/ | design |
| 77 | 77 | Colour Accessibility | Here’s a quote from Josef Albers: In visual perception a colour is almost never seen as it really is[…] This fact makes colour the most relative medium in art.Josef Albers, Interaction of Color, 1963 Albers was a German abstract painter and teacher, and published a very famous course on colour theory in 1963. Colour is very relative — not just in the way that it appears differently across different devices due to screen quality and colour management, but it can also be seen differently by different people — something we really need to be more mindful of when designing. What is colour blindness? Colour blindness very rarely means that you can’t see any colour at all, or that people see things in greyscale. It’s actually a decreased ability to see colour, or a decreased ability to tell colours apart from one another. How does it happen? Inside the typical human retina, there are two types of receptor cells — rods and cones. Rods are the cells that allow us to see dark and light, and shape and movement. Cones are the cells that allow us to perceive colour. There are three types of cones, each responsible for absorbing blue, red, and green wavelengths in the spectrum. Problems with colour vision occur when one or more of these types of cones are defective or absent entirely, and these problems can either be inherited through genetics, or acquired through trauma, exposure to ultraviolet light, degeneration with age, an effect of diabetes, or other factors. Colour blindness is a sex-linked trait and it’s much more common in men than in women. The most common type of colour blindness is called deuteranomaly which occurs in 7% of males, but only 0.5% of females. That’s a pretty significant portion of the population if you really stop and think about it — we can’t ignore this demographic. What does it look like? People with the most common types of colour blindness, like protanopia and deuteranopia, have difficulty discriminating between red and green hues. There are also forms of colour blindness like tritanop… | 2012 | Geri Coady | gericoady | 2012-12-04T00:00:00+00:00 | https://24ways.org/2012/colour-accessibility/ | design |
| 81 | 81 | Science! | Sometimes we want to capture people’s attention at a glance to communicate something fast. At other times we want to have the interface fade away into the background, letting people paint pictures in their minds with our words (if you’ll forgive a little flowery festive flourish). I tend to distinguish between these two broad objectives as designing for impact on the one hand, and designing for immersion on the other. What defines them is interruption. Impact needs an attention-grabbing interruption. Immersion requires us to remove interruption from the interface. Careful design deliberately interrupts but doesn’t accidentally disrupt. If that seems to make sense to you, then you’ll find the following snippets of science as useful as I did. Saccades and fixations As you’re reading this your eyes are skipping along the lines in tiny jumps. During each jump everything is blurred. Each jump ends in a small pause so your brain can take a snapshot of the letters. It arranges them into words, and then parses out the meaning — fast — in around a quarter of a second. The jumps are called saccades. The pauses are called fixations. Sometimes we take regressive saccades, skipping back to reread. There’s a simple example in the excellent little book, Detail in Typography, by Jost Hochuli. If you want to explore the science of reading in much more depth, I recommend the excellent paper, “The Science of Word Recognition”, by Dr Kevin Larson of Microsoft. To design for legibility and readability is to design for saccades and fixations. It’s the craft of making it easy for people’s brains to extract meaning, using techniques like good contrast, font size, spacing and structure, and only interrupting the reading experience deliberately. Scan paths At some point when visiting 24 ways you probably scanned the screen to get orientated. The journey your eyes took is known as a scan path. Scan paths are made up of saccades and fixations. Right now you’re following a scan path as you read, along one line, and down to the next… | 2012 | Jon Tan | jontan | 2012-12-24T00:00:00+00:00 | https://24ways.org/2012/science/ | design |
| 84 | 84 | Responsive Responsive Design | Now more than ever, we’re designing work meant to be viewed along a gradient of different experiences. Responsive web design offers us a way forward, finally allowing us to “design for the ebb and flow of things.” With those two sentences, Ethan closed the article that introduced the web to responsive design. Since then, responsive design has taken the web by storm. Seemingly every day, some company is touting their new responsive redesign. Large brands such as Microsoft, Time and Disney are getting in on the action, blowing away the once common criticism that responsive design was a technique only fit for small blogs. Certainly, this is a good thing. As Ethan and John Allsopp before him, were right to point out, the inherent flexibility of the web is a feature, not a bug. The web’s unique ability to be consumed and interacted with on any number of devices, with any number of input methods is something to be embraced. But there’s one part of the web’s inherent flexibility that seems to be increasingly overlooked: the ability for the web to be interacted with on any number of networks, with a gradient of bandwidth constraints and latency costs, on devices with varying degrees of hardware power. A few months back, Stephanie Rieger tweeted “Shoot me now…responsive design has seemingly become confused with an opportunity to reduce performance rather than improve it.” I would love to disagree, but unfortunately the evidence is damning. Consider the size and number of requests for four highly touted responsive sites that were launched this year: 74 requests, 1,511kb 114 requests, 1,200kb 99 requests, 1,298kb 105 requests, 5,942kb And those numbers were for the small screen versions of each site! These sites were praised for their visual design and responsive nature, and rightfully so. They’re very easy on the eyes and a lot of thought went into their appearance. But the numbers above tell an inconvenient truth: for all the time spent ensuring the visual design was airtight, seemingly very little (if… | 2012 | Tim Kadlec | timkadlec | 2012-12-05T00:00:00+00:00 | https://24ways.org/2012/responsive-responsive-design/ | design |
| 93 | 93 | Design Systems | The most important part of responsive web design is that, no matter what the viewport width, the content is accessible in an optimum display. The best responsive designs are those that allow you to go from one optimised display to another, but with the feeling that these experiences are part of a greater product whole. Responsive design: where we’ve been going wrong Responsive web design was a shock to my web designer system. Those of us who had already been designing sites for mobile probably had the biggest leap to make. We might have been detecting user agents in order to deliver a mobile-specific site, or using the slightly more familiar Bushido technique to deliver sites optimised for device type and viewport size, but either way our focus was on devices. A site was optimised for either a mobile phone or a desktop. Responsive web design brought us back to pre-table layout fluid sites that expanded or contracted to fit the viewport. This was a big difference to get our heads around when we were so used to designing for fixed-width layouts. Suddenly, an element could be any width or, at least, we needed to consider its maximum and minimum widths. Pixel perfection, while pretty, became wholly unrealistic, and a whole load of designers who prided themselves in detailed and precise designs got a bit scared. Hanging on to our previous processes and typical deliverables led us to continue to optimise our sites for particular devices and provide pixel-perfect mockups for those device widths. With all this we were concentrating on devices, not content, deliverables and not process, and making assumptions about users and their devices based on nothing but the width of the viewport. I don’t think this is a crime, I think it was inevitable. We can be up to date with our principles and ideals, but it’s never as easy in practice. That’s why it’s more important than ever to share our successful techniques and processes. Let’s drag each other into modern web design. Design systems: the principles What are design sy… | 2012 | Laura Kalbag | laurakalbag | 2012-12-12T00:00:00+00:00 | https://24ways.org/2012/design-systems/ | design |
| 82 | 82 | Being Prepared To Contribute | “You’ll figure it out.” The advice my dad gives has always been the same, whether addressing my grade school homework or paying bills after college. If I was looking for a shortcut, my dad wasn’t going to be the one to provide it. When I was a kid it infuriated the hell out of me, but what I then perceived to be a lack of understanding turned out to be a keystone in my upbringing. As an adult, I realize the value in not receiving outright solutions, but being forced to figure things out. Even today, when presented with a roadblock while building for the web, I am temped to get by with the help of the latest grid system, framework, polyfill, or plugin. In and of themselves these resources are harmless, but before I can drop them in, those damn words still echo in the back of my mind: “You’ll figure it out.” I know that if I blindly implement these tools as drag and drop solutions I fail to understand the intricacies behind how and why they were built; repeatedly using them as shortcuts handicaps my skill set. When I solely rely on the tools of others, my work is at their mercy, leaving me less creative and resourceful, and, thus, less able to contribute to the advancement of our industry and community. One of my favorite things about this community is how generous and collaborative it can be. I’ve loved seeing FitVids used all over the web and regularly improved upon at Github. I bet we can all think of a time where implementing a shared resource has benefitted our own work and sanity. Because these resources are so valuable, it’s important that we continue to be a part of the conversation in order to further develop solutions and ideas. It’s easy to assume there’s someone smarter or more up-to-date in any one area, but with a degree of understanding and perspective, we can all participate. This open form of collaboration is in our web DNA. After all, its primary purpose was to promote the exchange and development of new ideas. Tim Berners-Lee proposed a global hypertext project, to be known as the Worl… | 2012 | Trent Walton | trentwalton | 2012-12-03T00:00:00+00:00 | https://24ways.org/2012/being-prepared-to-contribute/ | process |
| 85 | 85 | Starting Your Project on the Right Foot (and Keeping It There) | I’m not sure if anything is as terrifying as beginning a new design project. I often spend hours trying to find the best initial footing in a design, so I’ve been working hard to improve my process, particularly for the earliest stages of a project. I want to smooth out the bumps that disrupt my creative momentum and focus on the emotional highs and lows I experience, and then try to minimize the lows and ride the highs as long as possible. Design is often a struggle broken up by blissful moments of creative clarity that provide valuable force to move your work forward. Momentum is a powerful tool in creative work, and it’s something we don’t always maximize when we’re working because of the hectic nature of our field. Obviously, every designer is going to have a different process, but I thought I’d share some of the methods I’ve begun to adopt. I hope this will spark a conversation among designers who are interested in looking at process in a new way. Jump-starting a project I cannot overstate the importance of immersing yourself in design and collecting ample amounts of inspiration when beginning a project. I make it a daily practice to visit a handful of sites (Dribbble, Graphic Exchange, Web Creme, siteInspire, Designspiration, and others) and save any examples of design that I like. I then sort them into general categories (publication design, illustration, typography, web design, and so on). Enjoying a bit of fresh design every day helps me absorb it and analyze why it’s effective instead of just imitating it. Many designers are afraid to look at too much design for fear that they’ll be tempted to copy it, but I feel a steady influx of design inspiration reduces that possibility. You’re much more likely to take the easy way out and rip off a design if you’re scrambling for inspiration after getting stuck. If you are immersed in design from a variety of mediums, you’ll engage your creative brain on multiple levels and have an easier time creating something unique for your project. Looking at good desig… | 2012 | Bethany Heck | bethanyheck | 2012-12-02T00:00:00+00:00 | https://24ways.org/2012/starting-your-project-on-the-right-foot/ | process |
| 88 | 88 | Think First, Code Later | This is a story that’s best told from the end, and it’s probably one you’re all familiar with. You, or someone just like you, have been building a website, probably as part of a skilled and capable team. You’re a front-end developer, focusing on JavaScript – it’s either your sole responsibility or shared around. It’s quite a big job, been going on for months, and at last it feels like you’re reaching the end of it. But, in a brief moment of downtime, you step back and take a look at the code as a whole. You notice that the folder called “jQuery plugins” suddenly looks rather full, and maybe there’s evidence of several methods of doing the same thing; there are loads of little niggly fixes in the bug tracker; and every place you use Ajax the structure of the data is slightly different. You sigh, and your shoulders droop slightly, and you think “Yeah, we’ll do that more cleanly next time.” The thing is, you probably already know how to rewrite the start of this story to make the ending work better. This situation is not really anyone’s fault – it’s just an accumulation of all the things you decided along the way, all the things you agreed you’d fix later that have disappeared into the black hole of technical debt, and accomodating all the “can we just…?” requests from around the team and the client. So, the solution to this is easy, right? More interminable planning meetings, more tightly controlled and documented specifications, less freedom to innovate, to try out new ideas and enjoy what you’re doing. Wait, that sounds even less fun than the old way. Minimum viable planning Actually, planning and specifications are exactly what you need, but the way you go about them can make a real difference, both to the quality of your code, and the quality of your life as a developer. It can be as simple as being a little more thoughtful before starting on any new piece of functionality. Involve your whole team if possible, or at least those working on what you’re doing. Canvass opinions and work out what the solution… | 2012 | Stephen Fulljames | stephenfulljames | 2012-12-07T00:00:00+00:00 | https://24ways.org/2012/think-first-code-later/ | process |
| 78 | 78 | Fluent Design through Early Prototyping | There’s a small problem with wireframes. They’re not good for showing the kind of interactions we now take for granted – transitions and animations on the web, in Android, iOS, and other platforms. There’s a belief that early prototyping requires a large amount of time and effort, and isn’t worth an early investment. But it’s not true! It’s still normal to spend a significant proportion of time working in wireframes. Given that wireframes are high-level and don’t show much detail, it’s tempting to give up control and responsibility for things like transitions and other things sidelined as visual considerations. These things aren’t expressed well, and perhaps not expressed at all, in wireframes, yet they critically influence the quality of a product. Rapid prototyping early helps to bring sidelined but significant design considerations into focus. Speaking fluent design Fluency in a language means being able to speak it confidently and accurately. The Latin root means flow. By design fluency, I mean using a set of skills in order to express or communicate an idea. Prototyping is a kind of fluency. It takes designers beyond the domain of grey and white boxes to consider all the elements that make up really good product design. Designers shouldn’t be afraid of speaking fluent design. They should think thoroughly about product decisions beyond their immediate role — not for the sake of becoming some kind of power-hungry design demigod, but because it will lead to better, more carefully considered product design. Wireframes are incomplete sentences Wireframes, once they’ve served their purpose, are a kind of self-imposed restriction. Mostly made out of grey and white boxes, they deliberately express the minimum. Important details — visuals, nuanced transitions, sounds — are missing. Their appearance bears little resemblance to the final thing. Responsibility for things that traditionally didn’t matter (or exist) is relinquished. Animations and transitions in particular are increasingly relevant to the mobile d… | 2012 | Rebecca Cottrell | rebeccacottrell | 2012-12-10T00:00:00+00:00 | https://24ways.org/2012/fluent-design-through-early-prototyping/ | ux |
| 96 | 96 | Unwrapping the Wii U Browser | The Wii U was released on 18 November 2012 in the US, and 30 November in the UK. It’s the first eighth generation home console, the first mainstream second-screen device, and it has some really impressive browser specs. Consoles are not just for games now: they’re marketed as complete entertainment solutions. Internet connectivity and browser functionality have gone from a nice-to-have feature in game consoles to a selling point. In Nintendo’s case, they see it as a challenge to design an experience that’s better than browsing on a desktop. Let’s make a browser that users can use on a daily basis, something that can really handle everything we’ve come to expect from a browser and do it more naturally. Sasaki – Iwata Asks on Nintendo.com With 11% of people using console browsers to visit websites, it’s important to consider these devices right from the start of projects. Browsing the web on a TV or handheld console is a very different experience to browsing on a desktop or a mobile phone, and has many usability implications. Console browser testing When I’m testing a console browser, one of the first things I do is run Niels Leenheer’s HTML5 test and Lea Verou’s CSS3 test. I use these benchmarks as a rough comparison of the standards each browser supports. In October, IE9 came out for the Xbox 360, scoring 120/500 in the HTML5 test and 32% in the CSS3 test. The PS Vita also had an update to its browser in recent weeks, jumping from 58/500 to 243/500 in the HTML5 test, and 32% to 55% in the CSS3 test. Manufacturers have been stepping up their game, trying to make their browsing experiences better. To give you an idea of how the Wii U currently compares to other devices, here are the test results of the other TV consoles I’ve tested. I’ve written more in-depth notes on TV and portable console browsers separately. Year of releaseHTML5 scoreCSS3 scoreNotes Wii U2012258/50048%Runs a Netfront browser (WebKit). Wii200689/500Wouldn’t runRuns an Opera browser. PS3200668/50038%Runs a Netfront browser (WebKit). X… | 2012 | Anna Debenham | annadebenham | 2012-12-22T00:00:00+00:00 | https://24ways.org/2012/unwrapping-the-wii-u-browser/ | ux |
Advanced export
JSON shape: default, array, newline-delimited
CREATE TABLE [articles] (
[title] TEXT ,
[contents] TEXT ,
[year] TEXT ,
[author] TEXT ,
[author_slug] TEXT ,
[published] TEXT ,
[url] TEXT ,
[topic] TEXT
);