articles

336 rows sorted by title descending

✎ View and edit SQL

This data as json, CSV (advanced)

Link rowid title ▲ contents year author author_slug published url topic
277 277 Raising the Bar on Mobile One of the primary challenges of designing for mobile devices is that screen real estate is often in limited supply. Through the advocacy of Luke W and others, we’ve drawn comfort from the idea that this constraint ends up benefiting users and designers alike, from obvious advantages like portability and reach, to influencing our content strategy decisions through focus and restraint. But that doesn’t mean we shouldn’t take advantage of every last pixel of that screen we can snag! As anyone who has designed a website for use on a smartphone can attest, there’s an awful lot of space on mobile screens dedicated to browser functions that would be better off toggled out of view. Unfortunately, the visibility of some of these elements is beyond our control, such as the buttons fixed to the bottom of the viewport in iOS’s Safari and the WebOS browser. However, in many devices, the address bar at the top can be manually hidden, and its absence frees up enough pixel room for a large, impactful heading, a critical piece of navigation, or even just a little more white space to air things out. So, as my humble contribution to this most festive of web publications, today I’ll dig into the approach I used to hide the address bar in a browser-agnostic fashion for sites like BostonGlobe.com, and the jQuery Mobile framework. Surveying the land First, let’s assess the chromes of some popular, current mobile browsers. For example purposes, the following screen-captures feature the homepage of the Boston Globe site, without any address-bar-hiding logic in place. Note: these captures are just mockups – actual experience on these platforms may vary. On the left is iOS5’s Safari (running on iPhone), and on the right is Windows Phone 7 (pre-Mango). BlackBerry 7 (left), and Android 2.3 (right). WebOS (left), Opera Mini (middle), and Opera Mobile (right). Some browsers, such the default browsers on WebOS and BlackBerry 5, hide the bar automatically without any developer intervention, but many of them don’t. Of these, we can o… 2011 Scott Jehl scottjehl 2011-12-20T00:00:00+00:00 https://24ways.org/2011/raising-the-bar-on-mobile/ design
317 317 Putting the World into "World Wide Web" Despite the fact that the Web has been international in scope from its inception, the predominant mass of Web sites are written in English or another left-to-right language. Sites are typically designed visually for Western culture, and rely on an enormous body of practices for usability, information architecture and interaction design that are by and large centric to the Western world. There are certainly many reasons this is true, but as more and more Web sites realize the benefits of bringing their products and services to diverse, global markets, the more demand there will be on Web designers and developers to understand how to put the World into World Wide Web. Internationalization According to the W3C, Internationalization is: “…the design and development of a product, application or document content that enables easy localization for target audiences that vary in culture, region, or language.” Many Web designers and developers have at least heard, if not read, about Internationalization. We understand that the Web is in fact worldwide, but many of us never have the opportunity to work with Internationalization. Or, when we do, think of it in purely technical terms, such as “which character set do I use?” At first glance, it might seem to many that Internationalization is the act of making Web sites available to international audiences. And while that is in fact true, this isn’t done by broad-stroking techniques and technologies. Instead, it involves a far more narrow understanding of geographical, cultural and linguistic differences in specific areas of the world. This is referred to as localization and is the act of making a Web site make sense in the context of the region, culture and language(s) the people using the site are most familiar with. Internationalization itself includes the following technical tasks: Ensuring no barrier exists to the localization of sites. Of critical importance in the planning stages of a site for Internationalized audiences, the role of the developer is to ensu… 2005 Molly Holzschlag mollyholzschlag 2005-12-09T00:00:00+00:00 https://24ways.org/2005/putting-the-world-into-world-wide-web/ ux
54 54 Putting My Patterns through Their Paces Over the last few years, the conversation around responsive design has shifted subtly, focusing not on designing pages, but on patterns: understanding the small, reusable elements that comprise a larger design system. And given that many of those patterns are themselves responsive, learning to manage these small layout systems has become a big part of my work. The thing is, the more pattern-driven work I do, the more I realize my design process has changed in a number of subtle, important ways. I suppose you might even say that pattern-driven design has, in a few ways, redesigned me. Meet the Teaser Here’s a recent example. A few months ago, some friends and I redesigned The Toast. (It was a really, really fun project, and we learned a lot.) Each page of the site is, as you might guess, stitched together from a host of tiny, reusable patterns. Some of them, like the search form and footer, are fairly unique, and used once per page; others are used more liberally, and built for reuse. The most prevalent example of these more generic patterns is the teaser, which is classed as, uh, .teaser. (Look, I never said I was especially clever.) In its simplest form, a teaser contains a headline, which links to an article: Fairly straightforward, sure. But it’s just the foundation: from there, teasers can have a byline, a description, a thumbnail, and a comment count. In other words, we have a basic building block (.teaser) that contains a few discrete content types – some required, some not. In fact, very few of those pieces need to be present; to qualify as a teaser, all we really need is a link and a headline. But by adding more elements, we can build slight variations of our teaser, and make it much, much more versatile. Nearly every element visible on this page is built out of our generic “teaser” pattern. But the teaser variation I’d like to call out is the one that appears on The Toast’s homepage, on search results or on section fronts. In the main content area, each teaser in the list features larger i… 2015 Ethan Marcotte ethanmarcotte 2015-12-10T00:00:00+00:00 https://24ways.org/2015/putting-my-patterns-through-their-paces/ code
27 27 Putting Design on the Map The web can leave us feeling quite detached from the real world. Every site we make is really just a set of abstract concepts manifested as tools for communication and expression. At any minute, websites can disappear, overwritten by a newfangled version or simply gone. I think this is why so many of us have desires to create a product, write a book, or play with the internet of things. We need to keep in touch with the physical world and to prove (if only to ourselves) that we do make real things. I could go on and on about preserving the web, the challenges of writing a book, or thoughts about how we can deal with the need to make real things. Instead, I’m going to explore something that gives us a direct relationship between a website and the physical world – maps. A map does not just chart, it unlocks and formulates meaning; it forms bridges between here and there, between disparate ideas that we did not know were previously connected. Reif Larsen, The Selected Works of T.S. Spivet The simplest form of map on a website tends to be used for showing where a place is and often directions on how to get to it. That’s an incredibly powerful tool. So why is it, then, that so many sites just plonk in a default Google Map and leave it as that? You wouldn’t just use dark grey Helvetica on every site, would you? Where’s the personality? Where’s the tailored experience? Where is the design? Jumping into design Let’s keep this simple – we all want to be better web folk, not cartographers. We don’t need to go into the history, mathematics or technology of map making (although all of those areas are really interesting to research). For the sake of our sanity, I’m going to gloss over some of the technical areas and focus on the practical concepts. Tiles If you’ve ever noticed a map loading in sections, it’s because it uses tiles that are downloaded individually instead of requiring the user to download everything that they might need. These tiles come in many styles and can be used for anything that covers large ar… 2014 Shane Hudson shanehudson 2014-12-11T00:00:00+00:00 https://24ways.org/2014/putting-design-on-the-map/ design
218 218 Put Yourself in a Corner Some backstory, and a shameful confession For the first couple years of high school I was one of those jerks who made only the minimal required effort in school. Strangely enough, how badly I behaved in a class was always in direct proportion to how skilled I was in the subject matter. In the subjects where I was confident that I could pass without trying too hard, I would give myself added freedom to goof off in class. Because I was a closeted lit-nerd, I was most skilled in English class. I’d devour and annotate required reading over the weekend, I knew my biblical and mythological allusions up and down, and I could give you a postmodern interpretation of a text like nobody’s business. But in class, I’d sit in the back and gossip with my friends, nap, or scribble patterns in the margins of my textbooks. I was nonchalant during discussion, I pretended not to listen during lectures. I secretly knew my stuff, so I did well enough on tests, quizzes, and essays. But I acted like an ass, and wasn’t getting the most I could out of my education. The day of humiliation, but also epiphany One day in Ms. Kaney’s AP English Lit class, I was sitting in the back doodling. An earbud was dangling under my sweater hood, attached to the CD player (remember those?) sitting in my desk. Because of this auditory distraction, the first time Ms. Kaney called my name, I barely noticed. I definitely heard her the second time, when she didn’t call my name so much as roar it. I can still remember her five feet frame stomping across the room and grabbing an empty desk. It screamed across the worn tile as she slammed it next to hers. She said, “This is where you sit now.” My face gets hot just thinking about it. I gathered my things, including the CD player (which was now impossible to conceal), and made my way up to the newly appointed Seat of Shame. There I sat, with my back to the class, eye-to-eye with Ms. Kaney. From my new vantage point I couldn’t see my friends, or the clock, or the window. All I saw were Ms. Kaney’s eyes, peeri… 2010 Meagan Fisher meaganfisher 2010-12-20T00:00:00+00:00 https://24ways.org/2010/put-yourself-in-a-corner/ process
297 297 Public Speaking with a Buddy My book Demystifying Public Speaking focuses on the variety of fears we each have about giving a talk. From presenting to a client, to leading a team standup, to standing on a conference stage, there are lots of things we can do to prepare ourselves for the spotlight and reduce those fears. Though it didn’t make it into the final draft, I wanted to highlight how helpful it can be to share that public speaking spotlight with another person, or a few more people. If you have fears about not knowing the answer to a question, fumbling your words, or making a mistake in the spotlight, then buddying up may be for you! To some, adding more people to a presentation sounds like a recipe for on-stage disaster. To others, having a friendly face nearby—a partner who can step in if you fumble—is incredibly reassuring. As design director Yesenia Perez-Cruz writes, “While public speaking is a deeply personal activity, you don’t have to go it alone. Nothing has helped my speaking career more than turning it into a group effort.” Co-presenting can level up a talk in two ways: an additional brain and presentation skill set can improve the content of the talk itself, and you may feel safer with the on-stage safety net of your buddy. For example, when I started giving lengthy workshops about building mobile device labs with my co-worker Destiny Montague, we brought different experience to the table. I was able to talk about the user experience of our lab, and the importance of testing across different screen sizes. Destiny spoke about the hardware aspects of the lab, like power consumption and networking. Our audience benefitted from the spectrum of insight we included in the talk. Moreover, Destiny and I kept each other energized and engaging while teaching our audience, having way more fun onstage. Partnering up alleviated the risk (and fear!) of fumbling; where one person makes a mistake, the other person is right there to help. Buddy presentations can be helpful if you fear saying “I don’t know” to a question, as there are oth… 2016 Lara Hogan larahogan 2016-12-06T00:00:00+00:00 https://24ways.org/2016/public-speaking-with-a-buddy/ process
3 3 Project Hubs: A Home Base for Design Projects SCENE: A design review meeting. Laptop screens. Coffee cups. Project manager: Hey, did you get my email with the assets we’ll be discussing? Client: I got an email from you, but it looks like there’s no attachment. PM: Whoops! OK. I’m resending the files with the attachments. Check again? Client: OK, I see them. It’s homepage_v3_brian-edits_FINAL_for-review.pdf, right? PM: Yeah, that’s the one. Client: OK, hang on, Bill’s going to print them out. (3-minute pause. Small talk ensues.) Client: Alright, Bill’s back. We’re good to start. Brian: Oh, actually those homepage edits we talked about last time are in the homepage_v4_brian_FINAL_v2.pdf document that I posted to Basecamp earlier today. Client: Oh, OK. What message thread was that in? Brian: Uh, I’m pretty sure it’s in “Homepage Edits and Holiday Schedule.” Client: Alright, I see them. Bill’s going back to the printer. Hang on a sec… This is only a slightly exaggerated version of my experience in design review meetings. The design project dance is a sloppy one. It involves a slew of email attachments, PDFs, PSDs, revisions, GitHub repos, staging environments, and more. And while tools like Basecamp can help manage all these moving parts, it can still be incredibly challenging to extract only the important bits, juggle deliverables, and see how your project is progressing. Enter project hubs. Project hubs A project hub consolidates all the key design and development materials onto a single webpage presented in reverse chronological order. The timeline lives online (either publicly available or password protected), so that everyone involved in the team has easy access to it. A project hub. I was introduced to project hubs after seeing Dan Mall’s open redesign of Reading Is Fundamental. Thankfully, I had a chance to work with Dan on two projects where I got to see firsthand how beneficial a project hub can be. Here’s what makes a project hub great: Serves as a centralized home base for the project Trains clients and teams to decide i… 2013 Brad Frost bradfrost 2013-12-17T00:00:00+00:00 https://24ways.org/2013/project-hubs/ process
312 312 Preparing to Be Badass Next Year Once we’ve eaten our way through the holiday season, people will start to think about new year’s resolutions. We tend to focus on things that we want to change… and often things that we don’t like about ourselves to “fix”. We set rules for ourselves, or try to start new habits or stop bad ones. We focus in on things we will or won’t do. For many of us the list of things we “ought” to be spending time on is just plain overwhelming – family, charity/community, career, money, health, relationships, personal development. It’s kinda scary even just listing it out, isn’t it? I want to encourage you to think differently about next year. The ever-brilliant Kathy Sierra articulates a better approach really well when talking about the attitude we should have to building great products. She tells us to think not about what the user will do with our product, but about what they are trying to achieve in the real world and how our product helps them to be badass1. When we help the user be badass, then we are really making a difference. I suppose this is one way of saying: focus not on what you will do, focus on what it will help you achieve. How will it help you be awesome? In what ways do you want to be more badass next year? A professional lens Though of course you might want to focus in on health or family or charity or community or another area next year, many people will want to become more badass in their chosen career. So let’s talk about a scaffold to help you figure out your professional / career development next year. First up, an assumption: everyone wants to be awesome. Nobody gets up in the morning aiming to be crap at their job. Nobody thinks to themselves “Today I am aiming for just south of mediocre, and if I can mess up everybody else’s ability to do good work then that will be just perfect2”. Ergo, you want to be awesome. So what does awesome look like? Danger! The big trap that people fall into when think about their professional development is to immediately focus on the things that they aren’t good … 2016 Meri Williams meriwilliams 2016-12-22T00:00:00+00:00 https://24ways.org/2016/preparing-to-be-badass-next-year/ business
336 336 Practical Microformats with hCard You’ve probably heard about microformats over the last few months. You may have even read the easily digestible introduction at Digital Web Magazine, but perhaps you’ve not found time to actually implement much yet. That’s understandable, as it can sometimes be difficult to see exactly what you’re adding by applying a microformat to a page. Sure, you’re semantically enhancing the information you’re marking up, and the Semantic Web is a great idea and all, but what benefit is it right now, today? Well, the answer to that question is simple: you’re adding lots of information that can be and is being used on the web here and now. The big ongoing battle amongst the big web companies if one of territory over information. Everyone’s grasping for as much data as possible. Some of that information many of us are cautious to give away, but a lot of is happy to be freely available. Of the data you’re giving away, it makes sense to give it as much meaning as possible, thus enabling anyone from your friends and family to the giant search company down the road to make the most of it. Ok, enough of the waffle, let’s get working. Introducing hCard You may have come across hCard. It’s a microformat for describing contact information (or really address book information) from within your HTML. It’s based on the vCard format, which is the format the contacts/address book program on your computer uses. All the usual fields are available – name, address, town, website, email, you name it. If you’re running Firefox and Greasemonkey (or if you can, just to try this out), install this user script. What it does is look for instances of the hCard microformat in a page, and then add in a link to pass any hCards it finds to a web service which will convert it to a vCard. Take a look at the About the author box at the bottom of this article. It’s a hCard, so you should be able to click the icon the user script inserts and add me to your Outlook contacts or OS X Address Book with just a click. So microformats are useful after all. Free… 2005 Drew McLellan drewmclellan 2005-12-06T00:00:00+00:00 https://24ways.org/2005/practical-microformats-with-hcard/ code
134 134 Photographic Palettes How many times have you seen a colour combination that just worked, a match so perfect that it just seems obvious? Now, how many times do you come up with those in your own work? A perfect palette looks easy when it’s done right, but it’s often maddeningly difficult and time-consuming to accomplish. Choosing effective colour schemes will always be more art than science, but there are things you can do that will make coming up with that oh-so-smooth palette just a little a bit easier. A simple trick that can lead to incredibly gratifying results lies in finding a strong photograph and sampling out particularly harmonious colours. Photo Selection Not all photos are created equal. You certainly want to start with imagery that fits the eventual tone you’re attempting to create. A well-lit photo of flowers might lead to a poor colour scheme for a funeral parlour’s web site, for example. It’s worth thinking about what you’re trying to say in advance, and finding a photo that lends itself to your message. As a general rule of thumb, photos that have a lot of neutral or de-saturated tones with one or two strong colours make for the best palette; bright and multi-coloured photos are harder to derive pleasing results from. Let’s start with a relatively neutral image. Sampling In the above example, I’ve surrounded the photo with three different background colours directly sampled from the photo itself. Moving from left to right, you can see how each of the sampled colours is from an area of increasingly smaller coverage within the photo, and yet there’s still a strong harmony between the photo and the background image. I don’t really need to pick the big obvious colours from the photo to create that match, I can easily concentrate on more interesting colours that might work better for what I intend. Using a similar palette, let’s apply those colour choices to a more interesting layout: In this mini-layout, I’ve re-used the same tan colour from the previous middle image as a background, and sampled out a nicely… 2006 Dave Shea daveshea 2006-12-22T00:00:00+00:00 https://24ways.org/2006/photographic-palettes/ design
166 166 Performance On A Shoe String Back in the summer, I happened to notice the official Wimbledon All England Tennis Club site had jumped to the top of Alexa’s Movers & Shakers list — a list that tracks sites that have had the biggest upturn or downturn in traffic. The lawn tennis championships were underway, and so traffic had leapt from almost nothing to crazy-busy in a no time at all. Many sites have similar peaks in traffic, especially when they’re based around scheduled events. No one cares about the site for most of the year, and then all of a sudden – wham! – things start getting warm in the data centre. Whilst the thought of chestnuts roasting on an open server has a certain appeal, it’s less attractive if you care about your site being available to visitors. Take a look at this Alexa traffic graph showing traffic patterns for superbowl.com at the beginning of each year, and wimbledon.org in the month of July. Traffic graph from Alexa.com Whilst not on the same scale or with such dramatic peaks, we have a similar pattern of traffic here at 24ways.org. Over the last three years we’ve seen a dramatic pick up in traffic over the month of December (as would be expected) and then a much lower, although steady load throughout the year. What we do have, however, is the luxury of knowing when the peaks will be. For a normal site, be that a blog, small scale web app, or even a small corporate site, you often just cannot predict when you might get slashdotted, end up on the front page of Digg or linked to from a similarly high-profile site. You just don’t know when the peaks will be. If you’re a big commercial enterprise like the Super Bowl, scaling up for that traffic is simply a cost of doing business. But for most of us, we can’t afford to have massive capacity sat there unused for 90% of the year. What you have to do instead is work out how to deal with as much traffic as possible with the modest resources you have. In this article I’m going to talk about some of the things we’ve learned about keeping 24 ways running throughout December,… 2007 Drew McLellan drewmclellan 2007-12-24T00:00:00+00:00 https://24ways.org/2007/performance-on-a-shoe-string/ ux
232 232 Optimize Your Web Design Workflow I’m not sure about you, but I still favour using Photoshop to create my designs for the web. I agree that this application, even with its never-ending feature set, is not the perfect environment to design websites in. The ideal application doesn’t exist yet, however, so until it does it’s maybe not such a bad idea to investigate ways to optimize our workflow. Why use Photoshop? It will probably not come as a surprise if I say that Photoshop and Illustrator are the applications that I know best and feel most comfortable and creative in. Some people prefer Fireworks for web design. Even though I understand people’s motivations, I still prefer Photoshop personally. On the occasions that I gave Fireworks a try, I ended up just using the application to export my images as slices, or to prepare a dummy for the client. For some reason, I’ve never been able to find my way in that app. There were always certain things missing that could only be done in either Photoshop or Illustrator, which bothered me. Why not start in the browser? These days, with CSS3 styling emerging, there are people who find it more efficient to design in the browser. I agree that at a certain point, once the basic design is all set and defined, you can jump right into the code and go from there. But the actual creative part, at least for me, needs to be done in an application such as Photoshop. As a designer I need to be able to create and experiment with shapes on the fly, draw things, move them around, change colours, gradients, effects, and so on. I can’t see me doing this with code. I’m sure if I switch to markup too quickly, I might end up with a rather boxy and less interesting design. Once I start playing with markup, I leave my typical ‘design zone’. My brain starts thinking differently – more rational and practical, if you know what I mean; I start to structure and analyse how to mark up my design in the most efficient semantic way. When I design, I tend to let that go for a bit. I think more freely and not so much about the limitatio… 2010 Veerle Pieters veerlepieters 2010-12-10T00:00:00+00:00 https://24ways.org/2010/optimize-your-web-design-workflow/ process
281 281 Nine Things I've Learned I’ve been a professional graphic designer for fourteen years and for just under four of those a professional web designer. Like most designers I’ve learned a lot in my time, both from a design point of view and in business as freelance designer. A few of the things I’ve learned stick out in my mind, so I thought I’d share them with you. They’re pretty random and in no particular order. 1. Becoming the designer you want to be When I started out as a young graphic designer, I wanted to design posters and record sleeves, pretty much like every other young graphic designer. The problem is that the reality of the world means that when you get your first job you’re designing the back of a paracetamol packet or something equally weird. I recently saw a tweet that went something like this: “You’ll never become the designer you always dreamt of being by doing the work you never wanted to do”. This is so true; to become the designer you want to be, you need to be designing the things you’re passionate about designing. This probably this means working in the evenings and weekends for little or no money, but it’s time well spent. Doing this will build up your portfolio with the work that really shows what you can do! Soon, someone will ask you to design something based on having seen this work. From this point, you’re carving your own path in the direction of becoming the designer you always wanted to be. 2. Compete on your own terms As well as all being friends, we are also competitors. In order to win new work we need a selling point, preferably a unique selling point. Web design is a combination of design disciplines – user experience design, user interface Design, visual design, development, and so on. Some companies will sell themselves as UX specialists, which is fine, but everyone who designs a website from scratch does some sort of UX, so it’s not really a unique selling point. Of course, some people do it better than others. One area of web design that clients have a strong opinion on, and will judge you by, is… 2011 Mike Kus mikekus 2011-12-11T00:00:00+00:00 https://24ways.org/2011/nine-things-ive-learned/ business
294 294 New Tricks for an Old Dog Much of my year has been spent helping new team members find their way around the expansive and complex codebase that is the TweetDeck front-end, trying to build a happy and productive group of people around a substantial codebase with many layers of legacy. I’ve loved doing this. Everything from writing new documentation, drawing diagrams, and holding technical architecture sessions teaches you something you didn’t know or exposes an area of uncertainty that you can go work on. In this article, I hope to share some experiences and techniques that will prove useful in your own situation and that you can impress your friends in some new and exciting ways! How do you do, fellow kids? To start with I’d like to introduce you to our JavaScript framework, Flight. Right now it’s used by twitter.com and TweetDeck although, as a company, Twitter is largely moving to React. Over time, as we used Flight for more complex interfaces, we found it wasn’t scaling with us. Composing components into trees was fiddly and often only applied for a specific parent-child pairing. It seems like an obvious feature with hindsight, but it didn’t come built-in to Flight, and it made reusing components a real challenge. There was no standard way to manage the state of a component; they all did it slightly differently, and the technique often varied by who was writing the code. This cost us in maintainability as you just couldn’t predict how a component would be built until you opened it. Making matters worse, Flight relied on events to move data around the application. Unfortunately, events aren’t good for giving structure to complex logic. They jump around in a way that’s hard to understand and debug, and force you to search your code for a specific string — the event name‚ to figure out what’s going on. To find fixes for these problems, we looked around at other frameworks. We like React for it’s simple, predictable state management and reactive re-render flow, and Elm for bringing strict functional programming to everyone. But when you ha… 2016 Tom Ashworth tomashworth 2016-12-18T00:00:00+00:00 https://24ways.org/2016/new-tricks-for-an-old-dog/ code
335 335 Naughty or Nice? CSS Background Images Web Standards based development involves many things – using semantically sound HTML to provide structure to our documents or web applications, using CSS for presentation and layout, using JavaScript responsibly, and of course, ensuring that all that we do is accessible and interoperable to as many people and user agents as we can. This we understand to be good. And it is good. Except when we don’t clearly think through the full implications of using those techniques. Which often happens when time is short and we need to get things done. Here are some naughty examples of CSS background images with their nicer, more accessible counterparts. Transaction related messages I’m as guilty of this as others (or, perhaps, I’m the only one that has done this, in which case this can serve as my holiday season confessional) We use lovely little icons to show status messages for a transaction to indicate if the action was successful, or was there a warning or error? For example: “Your postal/zip code was not in the correct format.” Notice that we place a nice little icon there, and use background colours and borders to convey a specific message: there was a problem that needs to be fixed. Notice that all of this visual information is now contained in the CSS rules for that div: <div class="error"> <p>Your postal/zip code was not in the correct format.</p> </div> div.error { background: #ffcccc url(../images/error_small.png) no-repeat 5px 4px; color: #900; border-top: 1px solid #c00; border-bottom: 1px solid #c00; padding: 0.25em 0.5em 0.25em 2.5em; font-weight: bold; } Using this approach also makes it very easy to create a div.success and div.warning CSS rules meaning we have less to change in our HTML. Nice, right? No. Naughty. Visual design communicates The CSS is being used to convey very specific information. The choice of icon, the choice of background colour and borders tell us visually that there is something wrong. With the icon as a background image – there… 2005 Derek Featherstone derekfeatherstone 2005-12-20T00:00:00+00:00 https://24ways.org/2005/naughty-or-nice-css-background-images/ code
36 36 Naming Things There are only two hard things in computer science: cache invalidation and naming things. Phil Karlton Being a professional web developer means taking responsibility for the code you write and ensuring it is comprehensible to others. Having a documented code style is one means of achieving this, although the size and type of project you’re working on will dictate the conventions used and how rigorously they are enforced. Working in-house may mean working with multiple developers, perhaps in distributed teams, who are all committing changes – possibly to a significant codebase – at the same time. Left unchecked, this codebase can become unwieldy. Coding conventions ensure everyone can contribute, and help build a product that works as a coherent whole. Even on smaller projects, perhaps working within an agency or by yourself, at some point the resulting product will need to be handed over to a third party. It’s sensible, therefore, to ensure that your code can be understood by those who’ll eventually take ownership of it. Put simply, code is read more often than it is written or changed. A consistent and predictable naming scheme can make code easier for other developers to understand, improve and maintain, presumably leaving them free to worry about cache invalidation. Let’s talk about semantics Names not only allow us to identify objects, but they can also help us describe the objects being identified. Semantics (the meaning or interpretation of words) is the cornerstone of standards-based web development. Using appropriate HTML elements allows us to create documents and applications that have implicit structural meaning. Thanks to HTML5, the vocabulary we can choose from has grown even larger. HTML elements provide one level of meaning: a widely accepted description of a document’s underlying structure. It’s only with the mutual agreement of browser vendors and developers that <p> indicates a paragraph. Yet (with the exception of widely accepted microdata and microformat schemas) only HTML elements co… 2014 Paul Lloyd paulrobertlloyd 2014-12-21T00:00:00+00:00 https://24ways.org/2014/naming-things/ code
164 164 My Other Christmas Present Is a Definition List A note from the editors: readers should note that the HTML5 redefinition of definition lists has come to pass and is now à la mode. Last year, I looked at how the markup for tag clouds was generally terrible. I thought this year I would look not at a method of marking up a common module, but instead just at a simple part of HTML and how it generally gets abused. No, not tables. Definition lists. Ah, definition lists. Often used but rarely understood. Examining the definition of definitions To start with, let’s see what the HTML spec has to say about them. Definition lists vary only slightly from other types of lists in that list items consist of two parts: a term and a description. The canonical example of a definition list is a dictionary. Words can have multiple descriptions (even the word definition has at least five). Also, many terms can share a single definition (for example, the word colour can also be spelt color, but they have the same definition). Excellent, we can all grasp that. But it very quickly starts to fall apart. Even in the HTML specification the definition list is mis-used. Another application of DL, for example, is for marking up dialogues, with each DT naming a speaker, and each DD containing his or her words. Wrong. Completely and utterly wrong. This is the biggest flaw in the HTML spec, along with dropping support for the start attribute on ordered lists. “Why?”, you may ask. Let me give you an example from Romeo and Juliet, act 2, scene 2. <dt>Juliet</dt> <dd>Romeo!</dd> <dt>Romeo</dt> <dd>My niesse?</dd> <dt>Juliet</dt> <dd>At what o'clock tomorrow shall I send to thee?</dd> <dt>Romeo</dt> <dd>At the hour of nine.</dd> Now, the problem here is that a given definition can have multiple descriptions (the DD). Really the dialog “descriptions” should be rolled up under the terms, like so: <dt>Juliet</dt> <dd>Romeo!</dd> <dd>At what o'clock tomorrow shall I send to thee?</dd> <dt>Romeo</dt> <dd>… 2007 Mark Norman Francis marknormanfrancis 2007-12-05T00:00:00+00:00 https://24ways.org/2007/my-other-christmas-present-is-a-definition-list/ code
240 240 My CSS Wish List I love Christmas. I love walking around the streets of London, looking at the beautifully decorated windows, seeing the shiny lights that hang above Oxford Street and listening to Christmas songs. I’m not going to lie though. Not only do I like buying presents, I love receiving them too. I remember making long lists that I would send to Father Christmas with all of the Lego sets I wanted to get. I knew I could only get one a year, but I would spend days writing the perfect list. The years have gone by, but I still enjoy making wish lists. And I’ll tell you a little secret: my mum still asks me to send her my Christmas list every year. This time I’ve made my CSS wish list. As before, I’d be happy with just one present. Before I begin… … this list includes: things that don’t exist in the CSS specification (if they do, please let me know in the comments – I may have missed them); others that are in the spec, but it’s incomplete or lacks use cases and examples (which usually means that properties haven’t been implemented by even the most recent browsers). Like with any other wish list, the further down I go, the more unrealistic my expectations – but that doesn’t mean I can’t wish. Some of the things we wouldn’t have thought possible a few years ago have been implemented and our wishes fulfilled (think multiple backgrounds, gradients and transformations, for example). The list Cross-browser implementation of font-size-adjust When one of the fall-back fonts from your font stack is used, rather than the preferred (first) one, you can retain the aspect ratio by using this very useful property. It is incredibly helpful when the fall-back fonts are smaller or larger than the initial one, which can make layouts look less polished. What font-size-adjust does is divide the original font-size of the fall-back fonts by the font-size-adjust value. This preserves the x-height of the preferred font in the fall-back fonts. Here’s a simple example: p { font-family: Calibri, "Lucida Sans", Verdana, sans-serif; … 2010 Inayaili de León Persson inayailideleon 2010-12-03T00:00:00+00:00 https://24ways.org/2010/my-css-wish-list/ code
100 100 Moo'y Christmas A note from the editors: Moo has changed their API since this article was written. As the web matures, it is less and less just about the virtual world. It is becoming entangled with our world and it is harder to tell what is virtual and what is real. There are several companies who are blurring this line and make the virtual just an extension of the physical. Moo is one such company. Moo offers simple print on demand services. You can print business cards, moo mini cards, stickers, postcards and more. They give you the ability to upload your images, customize them, then have them sent to your door. Many companies allow this sort of digital to physical interaction, but Moo has taken it one step further and has built an API. Printable stocking stuffers The Moo API consists of a simple XML file that is sent to their servers. It describes all the information needed to dynamically assemble and print your object. This is very helpful, not just for when you want to print your own stickers, but when you want to offer them to your customers, friends, organization or community with no hassle. Moo handles the check-out and shipping, all you need to do is what you do best, create! Now using an API sounds complicated, but it is actually very easy. I am going to walk you through the options so you can easily be printing in no time. Before you can begin sending data to the Moo API, you need to register and get an API key. This is important, because it allows Moo to track usage and to credit you. To register, visit http://www.moo.com/api/ and click “Request an API key”. In the following examples, I will use {YOUR API KEY HERE} as a place holder, replace that with your API key and everything will work fine. First thing you need to do is to create an XML file to describe the check-out basket. Open any text-editor and start with some XML basics. Don’t worry, this is pretty simple and Moo gives you a few tools to check your XML for errors before… 2008 Brian Suda briansuda 2008-12-19T00:00:00+00:00 https://24ways.org/2008/mooy-christmas/ code
90 90 Monkey Business “Too expensive.” “Over-priced.” “A bit rich.” They all mean the same thing. When you say that something’s too expensive, you’re doing much more than commenting on a price. You’re questioning the explicit or implicit value of a product or a service. You’re asking, “Will I get out of it what you want me to pay for it?” You’re questioning the competency, judgement and possibly even integrity of the individual or company that gave you that price, even though you don’t realise it. You might not be saying it explicitly, but what you’re implying is, “Have you made a mistake?”, “Am I getting the best deal?”, “Are you being honest with me?”, “Could I get this cheaper?” Finally, you’re being dishonest, because deep down you know all too well that there’s no such thing as too expensive. Why? It doesn’t matter what you’re questioning the price of. It could be a product, a service or the cost of an hour, day or week of someone’s time. Whatever you’re buying, too expensive is always an excuse. Saying it shifts acceptability of a price back to the person who gave it. What you should say, but are too afraid to admit, is: “It’s more money than I wanted to pay.” “It’s more than I estimated it would cost.” “It’s more than I can afford.” Everyone who’s given a price for a product or service will have been told at some point that it’s too expensive. It’s never comfortable to hear that. Thoughts come thick and fast: “What do I do?” “How do I react?” “Do I really want the business?” “Am I prepared to negotiate?” “How much am I willing to compromise?” It’s easy to be defensive when someone questions a price, but before you react, stay calm and remember that if someone says what you’re offering is too expensive, they’re saying more about themselves and their situation than they are about your price. Learn to read that situation and how to follow up with the right questions. Imagine you’ve quoted someone for a week of your time. “That’s too expensive,” they respond. How should you handle that? Think about what they might o… 2012 Andy Clarke andyclarke 2012-12-23T00:00:00+00:00 https://24ways.org/2012/monkey-business/ business
156 156 Mobile 2.0 Thinking 2.0 As web geeks, we have a thick skin towards jargon. We all know that “Web 2.0” has been done to death. At Blue Flavor we even have a jargon bucket to penalize those who utter such painfully overused jargon with a cash deposit. But Web 2.0 is a term that has lodged itself into the conscience of the masses. This is actually a good thing. The 2.0 suffix was able to succinctly summarize all that was wrong with the Web during the dot-com era as well as the next evolution of an evolving media. While the core technologies actually stayed basically the same, the principles, concepts, interactions and contexts were radically different. With that in mind, this Christmas I want to introduce to you the concept of Mobile 2.0. While not exactly a new concept in the mobile community, it is relatively unknown in the web community. And since the foundation of Mobile 2.0 is the web, I figured it was about time for you to get to know each other. It’s the Carriers’ world. We just live in it. Before getting into Mobile 2.0, I thought first I should introduce you to its older brother. You know the kind, the kid with emotional problems that likes to beat up on you and your friends for absolutely no reason. That is the mobile of today. The mobile ecosystem is a very complicated space often and incorrectly compared to the Web. If the Web was a freewheeling hippie — believing in freedom of information and the unity of man through communities — then Mobile is the cutthroat capitalist — out to pillage and plunder for the sake of the almighty dollar. Where the Web is relatively easy to publish to and ultimately make a buck, Mobile is wrought with layers of complexity, politics and obstacles. I can think of no better way to summarize these challenges than the testimony of Jason Devitt to the United States Congress in what is now being referred to as the “iPhone Hearing.” Jason is the co-founder and CEO of SkyDeck a new wireless startup and former CEO of Vindigo an early pioneer in mobile content. As Jason points out, th… 2007 Brian Fling brianfling 2007-12-21T00:00:00+00:00 https://24ways.org/2007/mobile-2-0/ business
258 258 Mistletoe Offline It’s that time of year, when we gather together as families to celebrate the life of the greatest person in history. This man walked the Earth long before us, but he left behind words of wisdom. Those words can guide us every single day, but they are at the forefront of our minds during this special season. I am, of course, talking about Murphy, and the golden rule he gave unto us: Anything that can go wrong will go wrong. So true! I mean, that’s why we make sure we’ve got nice 404 pages. It’s not that we want people to ever get served a File Not Found message, but we acknowledge that, despite our best efforts, it’s bound to happen sometime. Murphy’s Law, innit? But there are some Murphyesque situations where even your lovingly crafted 404 page won’t help. What if your web server is down? What if someone is trying to reach your site but they lose their internet connection? These are all things than can—and will—go wrong. I guess there’s nothing we can do about those particular situations, right? Wrong! A service worker is a Murphy-battling technology that you can inject into a visitor’s device from your website. Once it’s installed, it can intercept any requests made to your domain. If anything goes wrong with a request—as is inevitable—you can provide instructions for the browser. That’s your opportunity to turn those server outage frowns upside down. Take those network connection lemons and make network connection lemonade. If you’ve got a custom 404 page, why not make a custom offline page too? Get your server in order Step one is to make …actually, wait. There’s a step before that. Step zero. Get your site running on HTTPS, if it isn’t already. You won’t be able to use a service worker unless everything’s being served over HTTPS, which makes sense when you consider the awesome power that a service worker wields. If you’re developing locally, service workers will work fine for localhost, even without HTTPS. But for a live site, HTTPS is a must. Make an offline page Alright, assuming your site is being served… 2018 Jeremy Keith jeremykeith 2018-12-04T00:00:00+00:00 https://24ways.org/2018/mistletoe-offline/ code
155 155 Minification: A Christmas Diet The festive season is generally more about gorging ourselves than staying thin but we’re going to change all that with a quick introduction to minification. Performance has been a hot topic this last year. We’re building more complex sites and applications but at the same time trying to make then load faster and behave more responsively. What is a discerning web developer to do? Minification is the process of make something smaller, in the case of web site performance we’re talking about reducing the size of files we send to the browser. The primary front-end components of any website are HTML, CSS, Javascript and a sprinkling of images. Let’s find some tools to trim the fat and speed up our sites. For those that want to play along at home you can download the various utilities for Mac or Windows. You’ll want to be familiar with running apps on the command line too. HTMLTidy HTMLTidy optimises and strips white space from HTML documents. It also has a pretty good go at correcting any invalid markup while it’s at it. tidy -m page.html CSSTidy CSSTidy takes your CSS file, optimises individual rules (for instance transforming padding-top: 10px; padding-bottom: 10px; to padding: 10px 0;) and strips unneeded white space. csstidy style.css style-min.css JSMin JSMin takes your javascript and makes it more compact. With more and more websites using javascript to power (progressive) enhancements this can be a real bandwidth hog. Look out for pre-minified versions of libraries and frameworks too. jsmin <script.js >script-min.js Remember to run JSLint before you run JSMin to catch some common problems. OptiPNG Images can be a real bandwidth hog and making all of them smaller with OptiPNG should speed up your site. optipng image.png All of these tools have an often bewildering array of options and generally good documentation included as part of the package. A little experimentation will get you even more bang for your buck. For larger projects you likely won’t want to be manually minifying all your files. T… 2007 Gareth Rushgrove garethrushgrove 2007-12-06T00:00:00+00:00 https://24ways.org/2007/minification-a-christmas-diet/ process
39 39 Meet for Learning “I’ve never worked in a place like this,” said one of my direct reports during our daily stand-up meeting. And with that statement, my mind raced to the most important thing about lawyering that I’ve learned from decades of watching lawyers lawyer on TV: don’t ask a question you don’t know the answer to. But I couldn’t stop myself. I wanted to learn more. The thought developed in my mind. The words formed in my mouth. And the vocalization occurred: “A place like this?” “I’ve never worked where people are so honest and transparent about things.” Designing a learning-centered culture Before we started Center Centre, Jared Spool and I discussed both the larger goals and the smaller details of this new UX design school. We talked about things like user experience, curriculum, and structure. We discussed the pattern we saw in our research. Hiring managers told us time and again that great designers have excellent technical and interpersonal skills. But, more importantly, the best designers are lifelong learners—they are willing and able to learn how to do new things. Learning this led us to ask a critical question: how would we intentionally design a learning-centered experience? To craft the experience we were aiming for, we knew we had to create a learning-centered culture for our students and our employees. We knew that our staff would need to model the behaviors our students needed to learn. We knew the best way to shape the culture was to work with our direct reports—our directs—to develop the behaviors we wanted them to exemplify. To craft the experience we were aiming for, we knew we had to create a learning-centered culture for our students and our employees. We knew that our staff would need to model the behaviors our students needed to learn. Building a learning team Our learning-centered culture starts with our staff. We believe in transparency. Transparency builds trust. Effective organizations have effective teams who trust each other as individuals. One huge way we build that trust and provide… 2014 Leslie Jensen-Inman lesliejenseninman 2014-12-20T00:00:00+00:00 https://24ways.org/2014/meet-for-learning/ process
143 143 Marking Up a Tag Cloud Everyone’s doing it. The problem is, everyone’s doing it wrong. Harsh words, you might think. But the crimes against decent markup are legion in this area. You see, I’m something of a markup and semantics junkie. So I’m going to analyse some of the more well-known tag clouds on the internet, explain what’s wrong, and then show you one way to do it better. del.icio.us I think the first ever tag cloud I saw was on del.icio.us. Here’s how they mark it up. <div class="alphacloud"> <a href="/tag/.net" class="lb s2">.net</a> <a href="/tag/advertising" class=" s3">advertising</a> <a href="/tag/ajax" class=" s5">ajax</a> ... </div> Unfortunately, that is one of the worst examples of tag cloud markup I have ever seen. The page states that a tag cloud is a list of tags where size reflects popularity. However, despite describing it in this way to the human readers, the page’s author hasn’t described it that way in the markup. It isn’t a list of tags, just a bunch of anchors in a <div>. This is also inaccessible because a screenreader will not pause between adjacent links, and in some configurations will not announce the individual links, but rather all of the tags will be read as just one link containing a whole bunch of words. Markup crime number one. Flickr Ah, Flickr. The darling photo sharing site of the internet, and the biggest blind spot in every standardista’s vision. Forgive it for having atrocious markup and sometimes confusing UI because it’s just so much damn fun to use. Let’s see what they do. <p id="TagCloud">  <a href="/photos/tags/06/" style="font-size: 14px;">06</a>   <a href="/photos/tags/africa/" style="font-size: 12px;">africa</a>   <a href="/photos/tags/amsterdam/" style="font-size: 14px;">amsterdam</a>  ... </p> Again we have a simple collection of anchors like del.icio.us, only this time in a paragraph. But rather than using a class to represent the size of the tag they use an inline style. An inline style using a pixel-based font size. That’s so far away from the goal of sep… 2006 Mark Norman Francis marknormanfrancis 2006-12-09T00:00:00+00:00 https://24ways.org/2006/marking-up-a-tag-cloud/ code
5 5 Managing a Mind On 21 May 2013, I woke in a hospital bed feeling exhausted, disorientated and ashamed. The day before, I had tried to kill myself. It’s very hard to write about this and share it. It feels like I’m opening up the deepest recesses of my soul and laying everything bare, but I think it’s important we share this as a community. Since starting tentatively to write about my experience, I’ve had many conversations about this: sharing with others; others sharing with me. I’ve been surprised to discover how many people are suffering similarly, thinking that they’re alone. They’re not. Due to an insane schedule of teaching, writing, speaking, designing and just generally trying to keep up, I reached a point where my buffers completely overflowed. I was working so hard on so many things that I was struggling to maintain control. I was living life on fast-forward and my grasp on everything was slowly slipping. On that day, I reached a low point – the lowest point of my life – and in that moment I could see only one way out. I surrendered. I can’t really describe that moment. I’m still grappling with it. All I know is that I couldn’t take it any more and I gave up. I very nearly died. I’m very fortunate to have survived. I was admitted to hospital, taken there unconscious in an ambulance. On waking, I felt overwhelmed with shame and overcome with remorse, but I was resolved to grasp the situation and address it. The experience has forced me to confront a great deal of issues in my life; it has also encouraged me to seek a deeper understanding of my situation and, in particular, the mechanics of the mind. The relentless pace of change We work in a fast-paced industry: few others, if any, confront the daily challenges we face. The landscape we work within is characterised by constant flux. It’s changing and evolving at a rate we have never experienced before. Few industries reinvent themselves yearly, monthly, weekly… Ours is one of these industries. Technology accelerates at an alarming rate and keeping abreast of this … 2013 Christopher Murphy christophermurphy 2013-12-21T00:00:00+00:00 https://24ways.org/2013/managing-a-mind/ process
247 247 Managing Flow and Rhythm with CSS Custom Properties An important part of designing user interfaces is creating consistent vertical rhythm between elements. Creating consistent, predictable space doesn’t just make your web pages and views look better, but it can also improve the scan-ability. Browsers ship with default CSS and these styles often create consistent rhythm for flow elements out of the box. The problem is though that we often reset these styles with a reset. Elements such as <div> and <section> also have no default margin or padding associated with them. I’ve tried all sorts of weird and wonderful techniques to find a balance between using inherited CSS while also levelling the playing field for component driven front-ends with very little success. This experimentation is how I landed on the flow utility, though and I’m going to show you how it works. Let’s dive in! The Flow utility With the ever-growing number of folks working with component libraries and design systems, we could benefit from a utility that creates space for us, only when it’s appropriate to do so. The problem with my previous attempts at fixing this is that the spacing values were very rigid. That’s fine for 90% of contexts, but sometimes, it’s handy to be able to tweak the values based on the exact context of your component. This is where CSS Custom Properties come in handy. The code .flow { --flow-space: 1em; } .flow > * + * { margin-top: var(--flow-space); } What this code does is enable you to add a class of flow to an element which will then add margin-top to sibling elements within that element. We use the lobotomised owl selector to select these siblings. This approach enables an almost anonymous and automatic system which is ideal for component library based front-ends where components probably don’t have any idea what surrounds them. The other important part of this utility is the usage of the --flow-space custom property. We define it in the .flow component and each element within it will be spaced by --flow-space, by default. The beauty about setting this as a … 2018 Andy Bell andybell 2018-12-07T00:00:00+00:00 https://24ways.org/2018/managing-flow-and-rhythm-with-css-custom-properties/ code
136 136 Making XML Beautiful Again: Introducing Client-Side XSL Remember that first time you saw XML and got it? When you really understood what was possible and the deep meaning each element could carry? Now when you see XML, it looks ugly, especially when you navigate to a page of XML in a browser. Well, with every modern browser now supporting XSL 1.0, I’m going to show you how you can turn something as simple as an ATOM feed into a customised page using a browser, Notepad and some XSL. What on earth is this XSL? XSL is a family of recommendations for defining XML document transformation and presentation. It consists of three parts: XSLT 1.0 – Extensible Stylesheet Language Transformation, a language for transforming XML XPath 1.0 – XML Path Language, an expression language used by XSLT to access or refer to parts of an XML document. (XPath is also used by the XML Linking specification) XSL-FO 1.0 – Extensible Stylesheet Language Formatting Objects, an XML vocabulary for specifying formatting semantics XSL transformations are usually a one-to-one transformation, but with newer versions (XSL 1.1 and XSL 2.0) its possible to create many-to-many transformations too. So now you have an overview of XSL, on with the show… So what do I need? So to get going you need a browser an supports client-side XSL transformations such as Firefox, Safari, Opera or Internet Explorer. Second, you need a source XML file – for this we’re going to use an ATOM feed from Flickr.com. And lastly, you need an editor of some kind. I find Notepad++ quick for short XSLs, while I tend to use XMLSpy or Oxygen for complex XSL work. Because we’re doing a client-side transformation, we need to modify the XML file to tell it where to find our yet-to-be-written XSL file. Take a look at the source XML file, which originates from my Flickr photos tagged sky, in ATOM format. The top of the ATOM file now has an additional <?xml-stylesheet /> instruction, as can been seen on Line 2 below. This instructs the browser to use the XSL file to transform the document. <?xml version="1.0" encoding="utf-8" sta… 2006 Ian Forrester ianforrester 2006-12-07T00:00:00+00:00 https://24ways.org/2006/beautiful-xml-with-xsl/ code
30 30 Making Sites More Responsive, Responsibly With digital projects we’re used to shifting our thinking to align with our target audience. We may undertake research, create personas, identify key tasks, or observe usage patterns, with our findings helping to refine our ongoing creations. A product’s overall experience can make or break its success, and when it comes to defining these experiences our development choices play a huge role alongside more traditional user-focused activities. The popularisation of responsive web design is a great example of how we are able to shape the web’s direction through using technology to provide better experiences. If we think back to the move from table-based layouts to CSS, initially our clients often didn’t know or care about the difference in these approaches, but we did. Responsive design was similar in this respect – momentum grew through the web industry choosing to use an approach that we felt would give a better experience, and which was more future-friendly.  We tend to think of responsive design as a means of displaying content appropriately across a range of devices, but the technology and our implementation of it can facilitate much more. A responsive layout not only helps your content work when the newest smartphone comes out, but it also ensures your layout suitably adapts if a visually impaired user drastically changes the size of the text. The 24 ways site at 400% on a Retina MacBook Pro displays a layout more typically used for small screens. When we think more broadly, we realise that our technical choices and approaches to implementation can have knock-on effects for the greater good, and beyond our initial target audiences. We can make our experiences more responsive to people’s needs, enhancing their usability and accessibility along the way. Being responsibly responsive Of course, when we think about being more responsive, there’s a fine line between creating useful functionality and becoming intrusive and overly complex. In the excellent Responsible Responsive Design, Scott Jehl states that: … 2014 Sally Jenkinson sallyjenkinson 2014-12-10T00:00:00+00:00 https://24ways.org/2014/making-sites-more-responsive-responsibly/ code
97 97 Making Modular Layout Systems For all of the advantages the web has with distribution of content, I’ve always lamented the handiness of the WYSIWYG design tools from the print publishing world. When I set out to redesign my personal website, I wanted to have some of the same abilities that those tools have, laying out pages how I saw fit, and that meant a flexible system for dealing with imagery. Building on some of the CSS that Eric Meyer employed a few years back on the A List Apart design, I created a set of classes to use together to achieve the variety I was after. Employing multiple classes isn’t a new technique, but most examples aren’t coming at this from strictly editorial and visual perspectives; I wanted to have options to vary my layouts depending on content. If you want to skip ahead, you can view the example first. Laying the Foundation We need to be able to map out our page so that we have predictable canvas, and then create a system of image sizes that work with it. For the sake of this article, let’s use a simple uniform 7-column grid, consisting of seven 100px-wide columns and 10px of space between each column, though you can use any measurements you want as long as they remain constant. All of our images will have a width that references the grid column widths (in our example, 100px, 210px, 320px, 430px, 540px, 650px, or 760px), but the height can be as large as needed. Once we know our images will all have one of those widths, we can setup our CSS to deal with the variations in layout. In the most basic form, we’re going to be dealing with three classes: one each that represent an identifier, a size, and a placement for our elements. This is really a process of abstracting the important qualities of what you would do with a given image in a layout into separate classes, allowing you to quickly customize their appearance by combining the appropriate classes. Rather than trying to serve up a one-size-fits-all approach to styling, we give each class only one or two attributes and rely on the combination of classes … 2008 Jason Santa Maria jasonsantamaria 2008-12-15T00:00:00+00:00 https://24ways.org/2008/making-modular-layout-systems/ process
50 50 Make a Comic For something slightly different over Christmas, why not step away from your computer and make a comic? Definitely not the author working on a comic in the studio, with the desk displaying some of the things you need to make a comic on paper. Why make a comic? First of all, it’s truly fun and it’s not that difficult. If you’re a designer, you can use skills you already have, so why not take some time to indulge your aesthetic whims and make something for yourself, rather than for a client or your company. And you can use a computer – or not. If you’re an interaction designer, it’s likely you’ve already made a storyboard or flow, or designed some characters for personas. This is a wee jump away from that, to the realm of storytelling and navigating human emotions through characters who may or may not be human. Similar medium and skills, different content. It’s not a client deliverable but something that stands by itself, and you’ve nobody’s criteria to meet except those that exist in your imagination! Thanks to your brain and the alchemy of comics, you can put nearly anything in a sequence and your brain will find a way to make sense of it. Scott McCloud wrote about the non sequitur in comics: “There is a kind of alchemy at work in the space between panels which can help us find meaning or resonance in even the most jarring of combinations.” Here’s an example of a non sequitur from Scott McCloud’s Understanding Comics – the images bear no relation to one another, but since they’re in a sequence our brains do their best to understand it: Once you know this it takes the pressure off somewhat. It’s a fun thing to keep in mind and experiment with in your comics! Materials needed A4 copy/printing paper HB pencil for light drawing Dip pen and waterproof Indian ink Bristol board (or any good quality card with a smooth, durable surface) Step 1: Get ideas You’d be surprised where you can take a small grain of an idea and develop it into an interesting comic. Think about a funny conversation you had, or any i… 2015 Rebecca Cottrell rebeccacottrell 2015-12-20T00:00:00+00:00 https://24ways.org/2015/make-a-comic/ design
185 185 Make Your Mockup in Markup We aren’t designing copies of web pages, we’re designing web pages. Andy Clarke, via Quotes on Design The old way I used to think the best place to design a website was in an image editor. I’d create a pixel-perfect PSD filled with generic content, send it off to the client, go through several rounds of revisions, and eventually create the markup. Does this process sound familiar? You’re not alone. In a very scientific and official survey I conducted, close to 90% of respondents said they design in Photoshop before the browser. That process is whack, yo! Recently, thanks in large part to the influence of design hero Dan Cederholm, I’ve come to the conclusion that a website’s design should begin where it’s going to live: in the browser. Die Photoshop, die Some of you may be wondering, “what’s so bad about using Photoshop for the bulk of my design?” Well, any seasoned designer will tell you that working in Photoshop is akin to working in a minefield: you never know when it’s going to blow up in your face. The application Adobe Photoshop CS4 has unexpectedly ruined your day. Photoshop’s propensity to crash at crucial moments is a running joke in the industry, as is its barely usable interface. And don’t even get me started on the hot, steaming pile of crap that is text rendering. Text rendered in Photoshop (left) versus Safari (right). Crashing and text rendering issues suck, but we’ve learned to live with them. The real issue with using Photoshop for mockups is the expectations you’re setting for a client. When you send the client a static image of the design, you’re not giving them the whole picture — they can’t see how a fluid grid would function, how the design will look in a variety of browsers, basic interactions like :hover effects, or JavaScript behaviors. For more on the disadvantages to showing clients designs as images rather than websites, check out Andy Clarke’s Time to stop showing clients static design visuals. A necessary evil? In the past we’ve put up with Photoshop because it … 2009 Meagan Fisher meaganfisher 2009-12-24T00:00:00+00:00 https://24ways.org/2009/make-your-mockup-in-markup/ process
20 20 Make Your Browser Dance It was a crisp winter’s evening when I pulled up alongside the pier. I stepped out of my car and the bitterly cold sea air hit my face. I walked around to the boot, opened it and heaved out a heavy flight case. I slammed the boot shut, locked the car and started walking towards the venue. This was it. My first gig. I thought about all those weeks of preparation: editing video clips, creating 3-D objects, making coloured patterns, then importing them all into software and configuring effects to change as the music did; targeting frequency, beat, velocity, modifying size, colour, starting point; creating playlists of these… and working out ways to mix them as the music played. This was it. This was me VJing. This was all a lifetime (well a decade!) ago. When I started web designing, VJing took a back seat. I was more interested in interactive layouts, semantic accessible HTML, learning all the IE bugs and mastering the quirks that CSS has to offer. More recently, I have been excited by background gradients, 3-D transforms, the @keyframe directive, as well as new APIs such as getUserMedia, indexedDB, the Web Audio API But wait, have I just come full circle? Could it be possible, with these wonderful new things in technologies I am already familiar with, that I could VJ again, right here, in a browser? Well, there’s only one thing to do: let’s try it! Let’s take to the dance floor Over the past couple of years working in The Lab I have learned to take a much more iterative approach to projects than before. One of my new favourite methods of working is to create a proof of concept to make sure my theory is feasible, before going on to create a full-blown product. So let’s take the same approach here. The main VJing functionality I want to recreate is manipulating visuals in relation to sound. So for my POC I need to create a visual, with parameters that can be changed, then get some sound and see if I can analyse that sound to detect some data, which I can then use to manipulate the visual parameters. Easy, … 2013 Ruth John ruthjohn 2013-12-02T00:00:00+00:00 https://24ways.org/2013/make-your-browser-dance/ code
178 178 Make Out Like a Bandit If you are anything like me, you are a professional juggler. No, we don’t juggle bowling pins or anything like that (or do you? Hey, that’s pretty rad!). I’m talking about the work that we juggle daily. In my case, I’m a full-time designer, a half-time graduate student, a sometimes author and conference speaker, and an all-the-time social networker. Only two of these “positions” have actually put any money in my pocket (and, well, the second one takes a lot of money out). Still, this is all part of the work that I do. Your work situation is probably similar. We are workaholics. So if we work so much in our daily lives, shouldn’t we be making out like bandits? Umm, honestly, I’m not hitting on you, silly. I’m talking about our success. We work and work and work. Shouldn’t we be filthy, stinking rich? Well… okay, that’s not quite what I mean either. I’m not necessarily talking about money (though that could potentially be a part of it). I’m talking about success — as in feeling a true sense of accomplishment and feeling happy about what we do and why we do it. It’s important to feel accomplished and a general happiness in our work. To make out like a bandit (or have an incredible amount of success), you can either get lucky or work hard for it. And if you’re going to work hard for it, you might as well make it all meaningful and worthwhile. This is what I strive for in my own work and my life, and the following points I’m sharing with you are the steps I am taking to work toward this. I know the price of success: dedication, hard work & an unremitting devotion to the things you want to see happen. — Frank Lloyd Wright Learn. Participate. Do. The best way to get good at something is to keep doing whatever it is you’re doing that you want to be good at. For example, a sushi-enthusiast might take a sushi-making class because she wants to learn to make sushi for herself. It totally makes sense while the teacher demonstrates all the procedures, materials, and methods needed to make good, beautiful sushi. Later, … 2009 Jina Anne jina 2009-12-21T00:00:00+00:00 https://24ways.org/2009/make-out-like-a-bandit/ business
201 201 Lint the Web Forward With Sonarwhal Years ago, when I was in a senior in college, much of my web development courses focused on two things: the basics like HTML and CSS (and boy, do I mean basic), and Adobe Flash. I spent many nights writing ActionScript 3.0 to build interactions for the websites that I would add to my portfolio. A few months after graduating, I built one website in Flash for a client, then never again. Flash was dying, and it became obsolete in my résumé and portfolio. That was my first lesson in the speed at which things change in technology, and what a daunting realization that was as a new graduate looking to enter the professional world. Now, seven years later, I work on the Microsoft Edge team where I help design and build a tool that would have lessened my early career anxieties: sonarwhal. Sonarwhal is a linting tool, built by and for the web community. The code is open source and lives under the JS Foundation. It helps web developers and designers like me keep up with the constant change in technology while simultaneously teaching how to code better websites. Introducing sonarwhal’s mascot Nellie Good web development is hard. It is more than HTML, CSS, and JavaScript: developers are expected to have a grasp of accessibility, performance, security, emerging standards, and more, all while refreshing this knowledge every few months as the web evolves. It’s a lot to keep track of.   Web development is hard Staying up-to-date on all this knowledge is one of the driving forces for developing this scanning tool. Whether you are just starting out, are a student, or you have over a decade of experience, the sonarwhal team wants to help you build better websites for all browsers. Currently sonarwhal checks for best practices in five categories: Accessibility, Interoperability, Performance, PWAs, and Security. Each check is called a “rule”. You can configure them and even create your own rules if you need to follow some specific guidelines for your project (e.g. validate analytics attributes, title format of pages, etc.). You c… 2017 Stephanie Drescher stephaniedrescher 2017-12-02T00:00:00+00:00 https://24ways.org/2017/lint-the-web-forward-with-sonarwhal/ code
195 195 Levelling Up for Junior Developers If you are a junior developer starting out in the web industry, things can often seem a little daunting. There are so many things to learn, and as soon as you’ve learnt one framework or tool, there seems to be something new out there. I am lucky enough to lead a team of developers building applications for the web. During a recent One to One meeting with one of our junior developers, he asked me about a learning path and the basic fundamentals that every developer should know. After a bit of digging around, I managed to come up with a (not so exhaustive) list of principles that was shared with him. In this article, I will share the list with you, and hopefully help you level up from junior developer and become a better developer all round. This list doesn’t focus on an particular programming language, but rather coding concepts as a whole. The idea behind this list is that whether you are a front-end developer, back-end developer, full stack developer or just a curious one, these principles apply to everyone that writes code. I have tried to be technology agnostic, so that you can use these tips to guide you, whatever your tech stack might be. Without any further ado and in no particular order, let’s get started. Refactoring code like a boss The Boy Scouts have a rule that goes “always leave the campground cleaner than you found it.” This rule can be applied to code too and ensures that you leave code cleaner than you found it. As a junior developer, it’s almost certain that you will either create or come across older code that could be improved. The resources below are a guide that will help point you in the right direction. My favourite book on this subject has to be Clean Code by Robert C. Martin. It’s a must read for anyone writing code as it helps you identify bad code and shows you techniques that you can use to improve existing code. If you find that in your day to day work you deal with a lot of legacy code, Improving Existing Technology through Refactoring is another useful read. Design Patterns are a… 2017 Dean Hume deanhume 2017-12-05T00:00:00+00:00 https://24ways.org/2017/levelling-up-for-junior-developers/ code
2 2 Levelling Up Hello, 24 ways. I’m Ashley and I sell property insurance. I’m interrupting your Christmas countdown with an article about rental property software and a guy, Pete, who selflessly encouraged me to build my first web app. It doesn’t sound at all festive, or — considering I’ve used both “insurance” and “rental property” — interesting, but do stick with me. There’s eggnog at the end. I run a property insurance business, Brokers Direct. It’s a small operation, but well established. We’ve been selling landlord insurance on the web for over thirteen years, for twelve of which we have provided our clients with third-party software for managing their rental property portfolios. Free. Of. Charge. It sounds like a sweet deal for our customers, but it isn’t. At least, not any more. The third-party software is victim to years of neglect by its vendor. Its questionable interface, garish visuals and, ahem, clip art icons have suffered from a lack of updates. While it was never a contender for software of the year, I’ve steadily grown too embarrassed to associate my business with it. The third-party rental property software we distributed I wanted to offer my customers a simple, clean and lightweight alternative. In an industry that’s dominated by dated and bloated software, it seemed only logical that I should build my own rental property tool. The long learning-to-code slog Learning a programming language is daunting, the source of my frustration stemming from a non-programming background. Generally, tutorials assume a degree of familiarity with programming, whether it be tools, conventions or basic skills. I had none and, at the time, there was nothing on the web really geared towards a novice. I reached the point where I genuinely thought I was just not cut out for coding. Surrendering to my feelings of self-doubt and frustration, I sourced a local Rails developer, Pete, to build it for me. Pete brought a pack of index cards to our meeting. Index cards that would represent each feature the rental property software wo… 2013 Ashley Baxter ashleybaxter 2013-12-06T00:00:00+00:00 https://24ways.org/2013/levelling-up/ business
199 199 Knowing the Future - Tips for a Happy Launch Day You’ve chosen your frameworks and libraries. You’ve learned how to write code which satisfies the buzzword and performance gods. Now you need to serve it to a global audience, and make things easy to preview, to test, to sign-off, and to evolve. But infrastructure design is difficult and boring for most of us. We just want to get our work out into the wild. If only we had tools which would let us go, “Oh yeah! It all deploys perfectly every time” and shout, “You need another release? BAM! What’s next?” A truth that can be hard to admit is that very often, the production environment and its associated deployment processes are poorly defined until late into a project. This can be a problem. It makes my palms sweaty just thinking about it. If like me, you have spent time building things for clients, you’ll probably have found yourself working with a variety of technical partners and customers who bring different constraints and opportunities to your projects. Knowing and proving the environments and the deployment processes is often very difficult, but can be a factor which profoundly impacts our ability to deliver what we promised. To say nothing of our ability to sleep at night or leave our fingernails un-chewed. Let’s look at this a little, and see if we can’t set you up for a good night’s sleep, with dry palms and tidy fingernails. A familiar problem You’ve been here too, right? The project development was tough, but you’re pleased with what you are running in your local development environments. Now you need to get the client to see and approve your build, and hopefully indicate with a cheery thumbs up that it can “go live”. Chances are that we have a staging environment where the client can see the build. But be honest, is this exactly the same as the production environment? It should be, but often it’s not. Often the staging environment is nothing more than a visible server with none of the optimisations, security, load balancing, caching, and other vital bits of machinery that we’ll need (and need to test) … 2017 Phil Hawksworth philhawksworth 2017-12-21T00:00:00+00:00 https://24ways.org/2017/knowing-the-future/ process
129 129 Knockout Type - Thin Is Always In OS X has gorgeous native anti-aliasing (although I will admit to missing 10px aliased Geneva — *sigh*). This is especially true for dark text on a light background. However, things can go awry when you start using light text on a dark background. Strokes thicken. Counters constrict. Letterforms fill out like seasonal snackers. So how do we combat the fat? In Safari and other Webkit-based browsers we can use the CSS ‘text-shadow’ property. While trying to add a touch more contrast to the navigation on haveamint.com I noticed an interesting side-effect on the weight of the type. The second line in the example image above has the following style applied to it: This creates an invisible drop-shadow. (Why is it invisible? The shadow is positioned directly behind the type (the first two zeros) and has no spread (the third zero). So the color, black, is completely eclipsed by the type it is supposed to be shadowing.) Why applying an invisible drop-shadow effectively lightens the weight of the type is unclear. What is clear is that our light-on-dark text is now of a comparable weight to its dark-on-light counterpart. You can see this trick in effect all over ShaunInman.com and in the navigation on haveamint.com and Subtraction.com. The HTML and CSS source code used to create the example images used in this article can be found here. 2006 Shaun Inman shauninman 2006-12-17T00:00:00+00:00 https://24ways.org/2006/knockout-type/ code
24 24 Kill It With Fire! What To Do With Those Dreaded FAQs In the mid-1640s, a man named Matthew Hopkins attempted to rid England of the devil’s influence, primarily by demanding payment for the service of tying women to chairs and tossing them into lakes. Unsurprisingly, his methods garnered criticism. Hopkins defended himself in The Discovery of Witches in 1647, subtitled “Certaine Queries answered, which have been and are likely to be objected against MATTHEW HOPKINS, in his way of finding out Witches.” Each “querie” was written in the voice of an imagined detractor, and answered in the voice of an imagined defender (always referring to himself as “the discoverer,” or “him”): Quer. 14. All that the witch-finder doth is to fleece the country of their money, and therefore rides and goes to townes to have imployment, and promiseth them faire promises, and it may be doth nothing for it, and possesseth many men that they have so many wizzards and so many witches in their towne, and so hartens them on to entertaine him. Ans. You doe him a great deale of wrong in every of these particulars. Hopkins’ self-defense was an early modern English FAQ. Digital beginnings Question and answer formatting certainly isn’t new, and stretches back much further than witch-hunt days. But its most modern, most notorious, most reviled incarnation is the internet’s frequently asked questions page. FAQs began showing up on pre-internet mailing lists as a way for list members to answer and pre-empt newcomers’ repetitive questions: The presumption was that new users would download archived past messages through ftp. In practice, this rarely happened and the users tended to post questions to the mailing list instead of searching its archives. Repeating the “right” answers becomes tedious… When all the users of a system can hear all the other users, FAQs make a lot of sense: the conversation needs to be managed and manageable. FAQs were a stopgap for the technological limitations of the time. But the internet moved past mailing lists. Online information can be stored, searched,… 2013 Lisa Maria Martin lisamariamartin 2013-12-08T00:00:00+00:00 https://24ways.org/2013/what-to-do-with-faqs/ content
21 21 Keeping Parts of Your Codebase Private on GitHub Open source is brilliant, there’s no denying that, and GitHub has been instrumental in open source’s recent success. I’m a keen open-sourcerer myself, and I have a number of projects on GitHub. However, as great as sharing code is, we often want to keep some projects to ourselves. To this end, GitHub created private repositories which act like any other Git repository, only, well, private! A slightly less common issue, and one I’ve come up against myself, is the desire to only keep certain parts of a codebase private. A great example would be my site, CSS Wizardry; I want the code to be open source so that people can poke through and learn from it, but I want to keep any draft blog posts private until they are ready to go live. Thankfully, there is a very simple solution to this particular problem: using multiple remotes. Before we begin, it’s worth noting that you can actually build a GitHub Pages site from a private repo. You can keep the entire source private, but still have GitHub build and display a full Pages/Jekyll site. I do this with csswizardry.net. This post will deal with the more specific problem of keeping only certain parts of the codebase (branches) private, and expose parts of it as either an open source project, or a built GitHub Pages site. N.B. This post requires some basic Git knowledge. Adding your public remote Let’s assume you’re starting from scratch and you currently have no repos set up for your project. (If you do already have your public repo set up, skip to the “Adding your private remote” section.) So, we have a clean slate: nothing has been set up yet, we’re doing all of that now. On GitHub, create two repositories. For the sake of this article we shall call them site.com and private.site.com. Make the site.com repo public, and the private.site.com repo private (you will need a paid GitHub account). On your machine, create the site.com directory, in which your project will live. Do your initial work in there, commit some stuff — whatever you need to do. Now we need to link… 2013 Harry Roberts harryroberts 2013-12-09T00:00:00+00:00 https://24ways.org/2013/keeping-parts-of-your-codebase-private-on-github/ code
161 161 Keeping JavaScript Dependencies At Bay As we are writing more and more complex JavaScript applications we run into issues that have hitherto (god I love that word) not been an issue. The first decision we have to make is what to do when planning our app: one big massive JS file or a lot of smaller, specialised files separated by task. Personally, I tend to favour the latter, mainly because it allows you to work on components in parallel with other developers without lots of clashes in your version control. It also means that your application will be more lightweight as you only include components on demand. Starting with a global object This is why it is a good plan to start your app with one single object that also becomes the namespace for the whole application, say for example myAwesomeApp: var myAwesomeApp = {}; You can nest any necessary components into this one and also make sure that you check for dependencies like DOM support right up front. Adding the components The other thing to add to this main object is a components object, which defines all the components that are there and their file names. var myAwesomeApp = { components :{ formcheck:{ url:'formcheck.js', loaded:false }, dynamicnav:{ url:'dynamicnav.js', loaded:false }, gallery:{ url:'gallery.js', loaded:false }, lightbox:{ url:'lightbox.js', loaded:false } } }; Technically you can also omit the loaded properties, but it is cleaner this way. The next thing to add is an addComponent function that can load your components on demand by adding new SCRIPT elements to the head of the documents when they are needed. var myAwesomeApp = { components :{ formcheck:{ url:'formcheck.js', loaded:false }, dynamicnav:{ url:'dynamicnav.js', loaded:false }, gallery:{ url:'gallery.js', loaded:false }, lightbox:{ url:'lightbox.js', loaded:false } }, addComponent:function(component){ var c = this.components[component]; if(c && c.loaded === false){ var s = document.createElement('script'); s.setAttribut… 2007 Christian Heilmann chrisheilmann 2007-12-18T00:00:00+00:00 https://24ways.org/2007/keeping-javascript-dependencies-at-bay/ code
203 203 Jobs-to-Be-Done in Your UX Toolbox Part 1: What is JTBD? The concept of a “job” in “Jobs-To-Be-Done” is neatly encapsulated by a oft-quoted line from Theodore Levitt: “People want a quarter-inch hole, not a quarter inch drill”. Even so, Don Norman pointed out that perhaps Levitt “stopped too soon” at what the real customer goal might be. In the “The Design of Everyday Things”, he wrote: “Levitt’s example of the drill implying that the goal is really a hole is only partially correct, however. When people go to a store to buy a drill, that is not their real goal. But why would anyone want a quarter-inch hole? Clearly that is an intermediate goal. Perhaps they wanted to hang shelves on the wall. Levitt stopped too soon. Once you realize that they don’t really want the drill, you realize that perhaps they don’t really want the hole, either: they want to install their bookshelves. Why not develop methods that don’t require holes? Or perhaps books that don’t require bookshelves.” In other words, a “job” in JTBD lingo is a way to express a user need or provide a customer-centric problem frame that’s independent of a solution. As Tony Ulwick says: “A job is stable, it doesn’t change over time.” An example of a job is “tiding you over from breakfast to lunch.” You could hire a donut, a flapjack or a banana for that mid-morning snack—whatever does the job. If you can arrive at a clearly identified primary job (and likely some secondary ones too), you can be more creative in how you come up with an effective solution while keeping the customer problem in focus. The team at Intercom wrote a book on their application of JTBD. In it, Des Traynor cleverly characterised how JTBD provides a different way to think about solutions that compete for the same job: “Economy travel and business travel are both capable candidates applying for [the job: Get me face-to-face with my colleague in San Francisco], though they’re looking for significantly different salaries. Video conferencing isn’t as capable, but is willing to work for a … 2017 Steph Troeth stephtroeth 2017-12-04T00:00:00+00:00 https://24ways.org/2017/jobs-to-be-done-in-your-ux-toolbox/ ux
11 11 JavaScript: Taking Off the Training Wheels JavaScript is the third pillar of front-end web development. Of those pillars, it is both the most powerful and the most complex, so it’s understandable that when 24 ways asked, “What one thing do you wish you had more time to learn about?”, a number of you answered “JavaScript!” This article aims to help you feel happy writing JavaScript, and maybe even without libraries like jQuery. I can’t comprehensively explain JavaScript itself without writing a book, but I hope this serves as a springboard from which you can jump to other great resources. Why learn JavaScript? So what’s in it for you? Why take the next step and learn the fundamentals? Confidence with jQuery If nothing else, learning JavaScript will improve your jQuery code; you’ll be comfortable writing jQuery from scratch and feel happy bending others’ code to your own purposes. Writing efficient, fast and bug-free jQuery is also made much easier when you have a good appreciation of JavaScript, because you can look at what jQuery is really doing. Understanding how JavaScript works lets you write better jQuery because you know what it’s doing behind the scenes. When you need to leave the beaten track, you can do so with confidence. In fact, you could say that jQuery’s ultimate goal is not to exist: it was invented at a time when web APIs were very inconsistent and hard to work with. That’s slowly changing as new APIs are introduced, and hopefully there will come a time when jQuery isn’t needed. An example of one such change is the introduction of the very useful document.querySelectorAll. Like jQuery, it converts a CSS selector into a list of matching elements. Here’s a comparison of some jQuery code and the equivalent without. $('.counter').each(function (index) { $(this).text(index + 1); }); var counters = document.querySelectorAll('.counter'); [].slice.call(counters).forEach(function (elem, index) { elem.textContent = index + 1; }); Solving problems no one else has! When you have to go to the internet to solve a problem, you’re forever st… 2013 Tom Ashworth tomashworth 2013-12-05T00:00:00+00:00 https://24ways.org/2013/javascript-taking-off-the-training-wheels/ code
37 37 JavaScript Modules the ES6 Way JavaScript admittedly has plenty of flaws, but one of the largest and most prominent is the lack of a module system: a way to split up your application into a series of smaller files that can depend on each other to function correctly. This is something nearly all other languages come with out of the box, whether it be Ruby’s require, Python’s import, or any other language you’re familiar with. Even CSS has @import! JavaScript has nothing of that sort, and this has caused problems for application developers as they go from working with small websites to full client-side applications. Let’s be clear: it doesn’t mean the new module system in the upcoming version of JavaScript won’t be useful to you if you’re building smaller websites rather than the next Instagram. Thankfully, the lack of a module system will soon be a problem of the past. The next version of JavaScript, ECMAScript 6, will bring with it a full-featured module and dependency management solution for JavaScript. The bad news is that it won’t be landing in browsers for a while yet – but the good news is that the specification for the module system and how it will look has been finalised. The even better news is that there are tools available to get it all working in browsers today without too much hassle. In this post I’d like to give you the gift of JS modules and show you the syntax, and how to use them in browsers today. It’s much simpler than you might think. What is ES6? ECMAScript is a scripting language that is standardised by a company called Ecma International. JavaScript is an implementation of ECMAScript. ECMAScript 6 is simply the next version of the ECMAScript standard and, hence, the next version of JavaScript. The spec aims to be fully comfirmed and complete by the end of 2014, with a target initial release date of June 2015. It’s impossible to know when we will have full feature support across the most popular browsers, but already some ES6 features are landing in the latest builds of Chrome and Firefox. You shouldn’t expect to be… 2014 Jack Franklin jackfranklin 2014-12-03T00:00:00+00:00 https://24ways.org/2014/javascript-modules-the-es6-way/ code
153 153 JavaScript Internationalisation or: Why Rudolph Is More Than Just a Shiny Nose Dunder sat, glumly staring at the computer screen. “What’s up, Dunder?” asked Rudolph, entering the stable and shaking off the snow from his antlers. “Well,” Dunder replied, “I’ve just finished coding the new reindeer intranet Santa Claus asked me to do. You know how he likes to appear to be at the cutting edge, talking incessantly about Web 2.0, AJAX, rounded corners; he even spooked Comet recently by talking about him as if he were some pushy web server. “I’ve managed to keep him happy, whilst also keeping it usable, accessible, and gleaming — and I’m still on the back row of the sleigh! But anyway, given the elves will be the ones using the site, and they come from all over the world, the site is in multiple languages. Which is great, except when it comes to the preview JavaScript I’ve written for the reindeer order form. Here, have a look…” As he said that, he brought up the textileRef:8234272265470b85d91702:linkStartMarker:“order form in French”:/examples/javascript-internationalisation/initial.fr.html on the screen. (Same in English). “Looks good,” said Rudolph. “But if I add some items,” said Dunder, “the preview appears in English, as it’s hard-coded in the JavaScript. I don’t want separate code for each language, as that’s just silly — I thought about just having if statements, but that doesn’t scale at all…” “And there’s more, you aren’t displaying large numbers in French properly, either,” added Rudolph, who had been playing and looking at part of the source code: function update_text() { var hay = getValue('hay'); var carrots = getValue('carrots'); var bells = getValue('bells'); var total = 50 * bells + 30 * hay + 10 * carrots; var out = 'You are ordering ' + pretty_num(hay) + ' bushel' + pluralise(hay) + ' of hay, ' + pretty_num(carrots) + ' carrot' + pluralise(carrots) + ', and ' + pretty_num(bells) + ' shiny bell' + pluralise(bells) + ', at a total cost of <strong>' + pretty_num(total) + '</strong> gold pieces. Thank you.';… 2007 Matthew Somerville matthewsomerville 2007-12-08T00:00:00+00:00 https://24ways.org/2007/javascript-internationalisation/ code
241 241 Jank-Free Image Loads There are a few fundamental problems with embedding images in pages of hypertext; perhaps chief among them is this: text is very light and loads rather fast; images are much heavier and arrive much later. Consequently, millions (billions?) of times a day, a hapless Web surfer will start reading some text on a page, and then — Your browser doesn’t support HTML5 video. Here is a link to the video instead. — oops! — an image pops in above it, pushing said text down the page, and our poor reader loses their place. By default, partially-loaded pages have the user experience of a slippery fish, or spilled jar of jumping beans. For the rest of this article, I shall call that jarring, no-good jumpiness by its name: jank. And I’ll chart a path into a jank-free future – one in which it’s easy and natural to author <img> elements that load like this: Your browser doesn’t support HTML5 video. Here is a link to the video instead. Jank is a very old problem, and there is a very old solution to it: the width and height attributes on <img>. The idea is: if we stick an image’s dimensions right into the HTML, browsers can know those dimensions before the image loads, and reserve some space on the layout for it so that nothing gets bumped down the page when the image finally arrives. width Specifies the intended width of the image in pixels. When given together with the height, this allows user agents to reserve screen space for the image before the image data has arrived over the network. —The HTML 3.2 Specification, published on January 14 1997 Unfortunately for us, when width and height were first spec’d and implemented, layouts were largely fixed and images were usually only intended to render at their fixed, actual dimensions. When image sizing gets fluid, width and height get weird: See the Pen fluid width + fixed height = distortion by Eric Portis (@eeeps) on CodePen. width and height are too rigid for the responsive world. What we need, and have needed for a very long time, is a way to specify fixed aspect ra… 2018 Eric Portis ericportis 2018-12-21T00:00:00+00:00 https://24ways.org/2018/jank-free-image-loads/ code
244 244 It’s Beginning to Look a Lot Like XSSmas I dread the office Secret Santa. I have a knack for choosing well-meaning but inappropriate presents, like a bottle of port for a teetotaller, a cheese-tasting experience for a vegan, or heaven forbid, Spurs socks for an Arsenal supporter. Ok, the last one was intentional. It’s the same with gifting code. Once, I made a pattern library for A List Apart which I open sourced, and a few weeks later, a glaring security vulnerability was found in it. My gift was so generous that it enabled unrestricted access to any file on any public-facing server that hosted it. With platforms like GitHub and npm, giving the gift of code is so easy it’s practically a no-brainer. This giant, open source yankee swap helps us do our jobs without starting from scratch with every project. But like any gift-giving, it’s also risky. Vulnerabilities and Open Source Open source code is not inherently more or less vulnerable than closed-source code. What makes it higher risk is that the same piece of code gets reused in lots of places, meaning a hacker can use the same exploit mechanism on the same vulnerable code in different apps. Graph showing the number of open source vulnerabilities published per year, from the State of Open Source Security 2017 In the first 24 ways article this year, Katie referenced a few different types of vulnerability: Cross-site Request Forgery (also known as CSRF) SQL Injection Cross-site Scripting (also known as XSS) There are many more types of vulnerability, and those that live under the same category share similarities. For example, my favourite – is it weird to have a favourite vulnerability? – is Cross Site Scripting (XSS), which allows for the injection of scripts into web pages. This is a really common vulnerability often unwittingly added by developers. OWASP (the Open Web Application Security Project) wrote a great article about how to prevent opening the door to XSS attacks – share it generously with your colleagues. Most vulnerabilities like this are not added intentionally – they’re doors left ajar… 2018 Anna Debenham annadebenham 2018-12-17T00:00:00+00:00 https://24ways.org/2018/its-beginning-to-look-a-lot-like-xssmas/ code
198 198 Is Your Website Accidentally Sexist? Women make up 51% of the world’s population. More importantly, women make 85% of all purchasing decisions about consumer goods, 75% of the decisions about buying new homes, and 81% of decisions about groceries. The chances are, you want your website to be as attractive to women as it is to men. But we are all steeped in a male-dominated culture that subtly influences the design and content decisions we make, and some of those decisions can result in a website that isn’t as welcoming to women as it could be. Typography tells a story Studies show that we make consistent judgements about whether a typeface is masculine or feminine: Masculine typography has a square or geometric form with hard corners and edges, and is emphatically either blunt or spiky. Serif fonts are also considered masculine, as is bold type and capitals. Feminine typography favours slim lines, curling or flowing shapes with a lot of ornamentation and embellishment, and slanted letters. Sans-serif, cursive and script fonts are seen as feminine, as are lower case letters. The effect can be so subtle that even choosing between bold and regular styles within a single font family can be enough to indicate masculinity or femininity. If you want to appeal to both men and women, search for fonts that are gender neutral, or at least not too masculine. When you’re choosing groups of fonts that need to work harmoniously together, consider which fonts you are prioritising in your design. Is the biggest word on the page in a masculine or feminine font? What about the smallest words? Is there an imbalance between the prominence of masculine and feminine fonts, and what does this imply? Typography is a language in and of itself, so be careful what you say with it. Colour me unsurprised Colour also has an obvious gender bias. We associate pinks and purples, especially in combination, with girls and women, and a soft pink has become especially strongly related to breast cancer awareness campaigns. On the other hand, pale blue is strongly associated with boy… 2017 Suw Charman-Anderson suwcharmananderson 2017-12-20T00:00:00+00:00 https://24ways.org/2017/is-your-website-accidentally-sexist/ content
45 45 Is Agile Harder for Agencies? I once sat in a pitch meeting and watched a new business exec tell a potential client that his agency followed an agile workflow process at all times. The potential client nodded wisely, and they both agreed that agile was indeed the way to go. The meeting progressed and they signed off on a contract for a massive project, to be delivered in a standard waterfall fashion, with all manner of phases and key deliverables. Of course both of them left the meeting perfectly happy, because neither of them knew nor cared what an agile workflow process might be. That was about five years ago. As 2015 heaves into view I think it’s fair to say that attitudes have changed. Perhaps the same number of people claim to do Agile™ now as in 2010, but I think more of them are telling the truth. As a developer in an agency that works primarily with larger organisations, this year I have started to see a shift from agencies pushing agile methodologies with their clients, to clients requesting and even demanding agile practices from their agencies. Only a couple of years ago this would have been unusual behaviour. So what’s the problem? We should be happy then, no? Those of us in agencies will get to spend more time delivering great products, and less time arguing over out-of-date functional specs or battling through an adversarial change management procedure because somebody had a good idea during development rather than planning. We get to be a little bit more like our brothers and sisters in vaunted teams like the Government Digital Service, which is using agile approaches to great effect on projects that have a real benefit to their users. Almost. Unfortunately, it seems to be the case that adhering to an agile framework such as scrum is more difficult within an agency/client structure than it is for an in-house development team. This is no surprise. The Agile Manifesto was written in 2001 by a group of software developers for their own use. Many of the underlying principles of a framework like Scrum assume the existence of… 2014 Charlie Perrins charlieperrins 2014-12-12T00:00:00+00:00 https://24ways.org/2014/is-agile-harder-for-agencies/ process
322 322 Introduction to Scriptaculous Effects Gather around kids, because this year, much like in that James Bond movie with Denise Richards, Christmas is coming early… in the shape of scrumptuous smooth javascript driven effects at your every whim. Now what I’m going to do, is take things down a notch. Which is to say, you don’t need to know much beyond how to open a text file and edit it to follow this article. Personally, I for instance can’t code to save my life. Well, strictly speaking, that’s not entirely true. If my life was on the line, and the code needed was really simple and I wasn’t under any time constraints, then yeah maybe I could hack my way out of it But my point is this: I’m not a programmer in the traditional sense of the word. In fact, what I do best, is scrounge code off of other people, take it apart and then put it back together with duct tape, chewing gum and dumb blind luck. No, don’t run! That happens to be a good thing in this case. You see, we’re going to be implementing some really snazzy effects (which are considerably more relevant than most people are willing to admit) on your site, and we’re going to do it with the aid of Thomas Fuchs’ amazing Script.aculo.us library. And it will be like stealing candy from a child. What Are We Doing? I’m going to show you the very basics of implementing the Script.aculo.us javascript library’s Combination Effects. These allow you to fade elements on your site in or out, slide them up and down and so on. Why Use Effects at All? Before get started though, let me just take a moment to explain how I came to see smooth transitions as something more than smoke and mirror-like effects included for with little more motive than to dazzle and make parents go ‘uuh, snazzy’. Earlier this year, I had the good fortune of meeting the kind, gentle and quite knowledgable Matt Webb at a conference here in Copenhagen where we were both speaking (though I will be the first to admit my little talk on Open Source Design was vastly inferior to Matt’s talk). Matt held a talk called Fixing Broken Windows (b… 2005 Michael Heilemann michaelheilemann 2005-12-12T00:00:00+00:00 https://24ways.org/2005/introduction-to-scriptaculous-effects/ code
323 323 Introducing UDASSS! Okay. What’s that mean? Unobtrusive Degradable Ajax Style Sheet Switcher! Boy are you in for treat today ‘cause we’re gonna have a whole lotta Ajaxifida Unobtrucitosity CSS swappin’ Fun! Okay are you really kidding? Nope. I’ve even impressed myself on this one. Unfortunately, I don’t have much time to tell you the ins and outs of what I actually did to get this to work. We’re talking JavaScript, CSS, PHP…Ajax. But don’t worry about that. I’ve always believed that a good A.P.I. is an invisible A.P.I… and this I felt I achieved. The only thing you need to know is how it works and what to do. A Quick Introduction Anyway… First of all, the idea is very simple. I wanted something just like what Paul Sowden put together in Alternative Style: Working With Alternate Style Sheets from Alistapart Magazine EXCEPT a few minor (not-so-minor actually) differences which I’ve listed briefly below: Allow users to switch styles without JavaScript enabled (degradable) Preventing the F.O.U.C. before the window ‘load’ when getting preferred styles Keep the JavaScript entirely off our markup (no onclick’s or onload’s) Make it very very easy to implement (ok, Paul did that too) What I did to achieve this was used server-side cookies instead of JavaScript cookies. Hence, PHP. However this isn’t a “PHP style switcher” – which is where Ajax comes in. For the extreme technical folks, no, there is no xml involved here, or even a callback response. I only say Ajax because everyone knows what ‘it’ means. With that said, it’s the Ajax that sets the cookies ‘on the fly’. Got it? Awesome! What you need Luckily, I’ve done the work for you. It’s all packaged up in a nice zip file (at the end…keep reading for now) – so from here on out, just follow these instructions As I’ve mentioned, one of the things we’ll be working with is PHP. So, first things first, open up a file called index and save it with a ‘.php’ extension. Next, place the following text at the top of your document (even above your DOCTYPE) <?php require_once('uti… 2005 Dustin Diaz dustindiaz 2005-12-18T00:00:00+00:00 https://24ways.org/2005/introducing-udasss/ code
126 126 Intricate Fluid Layouts in Three Easy Steps The Year of the Script may have drawn attention away from CSS but building fluid, multi-column, cross-browser CSS layouts can still be as unpleasant as a lump of coal. Read on for a worry-free approach in three quick steps. The layout system I developed, YUI Grids CSS, has three components. They can be used together as we’ll see, or independently. The Three Easy Steps Choose fluid or fixed layout, and choose the width (in percents or pixels) of the page. Choose the size, orientation, and source-order of the main and secondary blocks of content. Choose the number of columns and how they distribute (for example 50%-50% or 25%-75%), using stackable and nestable grid structures. The Setup There are two prerequisites: We need to normalize the size of an em and opt into the browser rendering engine’s Strict Mode. Ems are a superior unit of measure for our case because they represent the current font size and grow as the user increases their font size setting. This flexibility—the container growing with the user’s wishes—means larger text doesn’t get crammed into an unresponsive container. We’ll use YUI Fonts CSS to set the base size because it provides consistent-yet-adaptive font-sizes while preserving user control. The second prerequisite is to opt into Strict Mode (more info on rendering modes) by declaring a Doctype complete with URI. You can choose XHTML or HTML, and Transitional or Strict. I prefer HTML 4.01 Strict, which looks like this: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> Including the CSS A single small CSS file powers a nearly-infinite number of layouts thanks to a recursive system and the interplay between the three distinct components. You could prune to a particular layout’s specific needs, but why bother when the complete file weighs scarcely 1.8kb uncompressed? Compressed, YUI Fonts and YUI Grids combine for a miniscule 0.9kb over the wire. You could save an HTTP request by concatenating the two CSS files, or by adding their contents … 2006 Nate Koechley natekoechley 2006-12-20T00:00:00+00:00 https://24ways.org/2006/intricate-fluid-layouts/ code
295 295 Internet of Stranger Things This year I’ve been running a workshop about using JavaScript and Node.js to work with all different kinds of electronics on the Raspberry Pi. So especially for 24 ways I’m going to show you how I made a very special Raspberry Pi based internet connected project! And nothing says Christmas quite like a set of fairy lights connected to another dimension1. What you’ll see You can rig up the fairy lights in your home, with the scrawly letters written under each one. The people from the other side (i.e. the internet) will be able to write messages to you from their browser in real time. In fact why not try it now; check this web page. When you click the lights in your browser, my lights (and yours) will turn on and off in real life! (There may be a queue if there are lots of people accessing it, hit the “Send a message” button and wait your turn.) It’s all done with JavaScript, using Node.js running on both the Raspberry Pi and on the server. I’m using WebSockets to communicate in real time between the browser, server and Raspberry Pi. What you’ll need Raspberry Pi any of the following models: Zero (will need straight male header pins soldered2 and Micro USB OTG adaptor), A+, B+, 2, or 3 Micro SD card at least 4Gb Class 10 speed3 Micro USB power supply at least 2A USB Wifi dongle (unless you have a Pi 3 - that has wifi built in). Addressable fairy lights Logic level shifter (with pins soldered unless you want to do it!) Breadboard Jumper wires (3x male to male and 4x female to male) Optional but recommended Base board to hold the Pi and Breadboard (often comes with a breadboard!) Find links for where to buy all of these items that goes along with this tutorial. The total price should be around $1004. Setting up the Raspberry Pi You’ll need to install the SD card for the Raspberry Pi. You’ll find a link to download a disk image on the support document, ready-made with the Raspbian version of Linux, along with Node.js and all the files you need. Download it and write it to the SD card using the fantastic free … 2016 Seb Lee-Delisle sebleedelisle 2016-12-01T00:00:00+00:00 https://24ways.org/2016/internet-of-stranger-things/ code
26 26 Integrating Contrast Checks in Your Web Workflow It’s nearly Christmas, which means you’ll be sure to find an overload of festive red and green decorating everything in sight—often in the ugliest ways possible. While I’m not here to battle holiday tackiness in today’s 24 ways, it might just be the perfect reminder to step back and consider how we can implement colour schemes in our websites and apps that are not only attractive, but also legible and accessible for folks with various types of visual disabilities. This simulated photo demonstrates how red and green Christmas baubles could appear to a person affected by protanopia-type colour blindness—not as festive as you might think. Source: Derek Bruff I’ve been fortunate to work with Simply Accessible to redesign not just their website, but their entire brand. Although the new site won’t be launching until the new year, we’re excited to let you peek under the tree and share a few treats as a case study into how we tackled colour accessibility in our project workflow. Don’t worry—we won’t tell Santa! Create a colour game plan A common misconception about accessibility is that meeting compliance requirements hinders creativity and beautiful design—but we beg to differ. Unfortunately, like many company websites and internal projects, Simply Accessible has spent so much time helping others that they had not spent enough time helping themselves to show the world who they really are. This was the perfect opportunity for them to practise what they preached. After plenty of research and brainstorming, we decided to evolve the existing Simply Accessible brand. Or, rather, salvage what we could. There was no established logo to carry into the new design (it was a stretch to even call it a wordmark), and the Helvetica typography across the site lacked any character. The only recognizable feature left to work with was colour. It was a challenge, for sure: the oranges looked murky and brown, and the blues looked way too corporate for a company like Simply Accessible. We knew we needed to inject a lot of personalit… 2014 Geri Coady gericoady 2014-12-22T00:00:00+00:00 https://24ways.org/2014/integrating-contrast-checks-in-your-web-workflow/ design
291 291 Information Literacy Is a Design Problem Information literacy, wrote Dr. Carol Kulthau in her 1987 paper “Information Skills for an Information Society,” is “the ability to read and to use information essential for everyday life”—that is, to effectively navigate a world built on “complex masses of information generated by computers and mass media.” Nearly thirty years later, those “complex masses of information” have only grown wilder, thornier, and more constant. We call the internet a firehose, yet we’re loathe to turn it off (or even down). The amount of information we consume daily is staggering—and yet our ability to fully understand it all remains frustratingly insufficient. This should hit a very particular chord for those of us working on the web. We may be developers, designers, or strategists—we may not always be responsible for the words themselves—but we all know that communication is much more than just words. From fonts to form fields, every design decision that we make changes the way information is perceived—for better or for worse. What’s more, the design decisions that we make feed into larger patterns. They don’t just affect the perception of a single piece of information on a single site; they start to shape reader expectations of information anywhere. Users develop cumulative mental models of how websites should be: where to find a search bar, where to look at contact information, how to filter a product list. And yet: our models fail us. Fundamentally, we’re not good at parsing information, and that’s troubling. Our experience of an “information society” may have evolved, but the skills Dr. Kuhlthau spoke of are even more critical now: our lives depend on information literacy. Patterns from words Let’s start at the beginning: with the words. Our choice of words can drastically alter a message, from its emotional resonance to its context to its literal meaning. Sometimes we can use word choice for good, to reinvigorate old, forgotten, or unfairly besmirched ideas. One time at a wedding bbq we labeled the coleslaw BRASSICA MIXTA so… 2016 Lisa Maria Martin lisamariamartin 2016-12-14T00:00:00+00:00 https://24ways.org/2016/information-literacy-is-a-design-problem/ content
91 91 Infinite Canvas: Moving Beyond the Page Remember Web 2.0? I do. In fact, that phrase neatly bifurcates my life on the internet. Pre-2.0, I was occupied by chatting on AOL and eventually by learning HTML so I could build sites on Geocities. Around 2002, however, I saw a WYSIWYG demo in Dreamweaver. The instructor was dragging boxes and images around a canvas. With a few clicks he was able to build a dynamic, single-page interface. Coming from the world of tables and inline HTML styles, I was stunned. As I entered college the next year, the web was blossoming: broadband, Wi-Fi, mobile (proud PDA owner, right here), CSS, Ajax, Bloglines, Gmail and, soon, Google Maps. I was a technology fanatic and a hobbyist web developer. For me, the web had long been informational. It was now rapidly becoming something else, something more: sophisticated, presentational, actionable. In 2003 we watched as the internet changed. The predominant theme of those early Web 2.0 years was the withering of Internet Explorer 6 and the triumph of web standards. Upon cresting that mountain, we looked around and collectively breathed the rarefied air of pristine HMTL and CSS, uncontaminated by toxic hacks and forks – only to immediately begin hurtling down the other side at what is, frankly, terrifying speed. Ten years later, we are still riding that rocket. Our days (and nights) are spent cramming for exams on CSS3 and RWD and Sass and RESS. We are the proud, frazzled owners of tiny pocket computers that annihilate the best laptops we could have imagined, and the architects of websites that are no longer restricted to big screens nor even segregated by device. We dragoon our sites into working any time, anywhere. At this point, we can hardly ask the spec developers to slow down to allow us to catch our breath, nor should we. It is, without a doubt, a most wonderful time to be a web developer. But despite the newfound luxury of rounded corners, gradients, embeddable fonts, low-level graphics APIs, and, glory be, shadows, the canyon between HTML and native appears to be as wide as… 2012 Nathan Peretic nathanperetic 2012-12-21T00:00:00+00:00 https://24ways.org/2012/infinite-canvas-moving-beyond-the-page/ code
146 146 Increase Your Font Stacks With Font Matrix Web pages built in plain old HTML and CSS are displayed using only the fonts installed on users’ computers (@font-face implementations excepted). To enable this, CSS provides the font-family property for specifying fonts in order of preference (often known as a font stack). For example: h1 {font-family: 'Egyptienne F', Cambria, Georgia, serif} So in the above rule, headings will be displayed in Egyptienne F. If Egyptienne F is not available then Cambria will be used, failing that Georgia or the final fallback default serif font. This everyday bit of CSS will be common knowledge among all 24 ways readers. It is also a commonly held belief that the only fonts we can rely on being installed on users’ computers are the core web fonts of Arial, Times New Roman, Verdana, Georgia and friends. But is that really true? If you look in the fonts folder of your computer, or even your Mum’s computer, then you are likely to find a whole load of fonts besides the core ones. This is because many software packages automatically install extra typefaces. For example, Office 2003 installs over 100 additional fonts. Admittedly not all of these fonts are particularly refined, and not all are suitable for the Web. However they still do increase your options. The Matrix I have put together a matrix of (western) fonts showing which are installed with Mac and Windows operating systems, which are installed with various versions of Microsoft Office, and which are installed with Adobe Creative Suite. The matrix is available for download as an Excel file and as a CSV. There are no readily available statistics regarding the penetration of Office or Creative Suite, but you can probably take an educated guess based on your knowledge of your readers. The idea of the matrix is that use can use it to help construct your font stack. First of all pick the font you’d really like for your text – this doesn’t have to be in the matrix. Then pick the generic family (serif, sans-serif, cursive, fantasy or monospace) and a font from each of the … 2007 Richard Rutter richardrutter 2007-12-17T00:00:00+00:00 https://24ways.org/2007/increase-your-font-stacks-with-font-matrix/ design
255 255 Inclusive Considerations When Restyling Form Controls I would like to begin by saying 2018 was the year that we, as developers, visual designers, browser implementers, and inclusive design and experience specialists rallied together and achieved a long-sought goal: We now have the ability to fully style form controls, across all modern browsers, while retaining their ease of declaration, native functionality and accessibility. I would like to begin by saying all these things. However, they’re not true. I think we spent the year debating about what file extension CSS should be written in, or something. Or was that last year? Maybe I’m thinking of next year. Returning to reality, styling form controls is more tricky and time consuming these days rather than flat out “hard”. In fact, depending on the length of the styling-leash a particular browser provides, there are controls you can style quite a bit. As for browsers with shorter leashes, there are other options to force their controls closer to the visual design you’re tasked to match. However, when striving for custom styled controls, one must be careful not to forget about the inherent functionality and accessibility that many provide. People expect and deserve the products and services they use and pay for to work for them. If these services are visually pleasing, but only function for those who fit the handful of personas they’ve been designed for, then we’ve potentially deprived many people the experiences they deserve. Quick level setting Getting down to brass tacks, when creating custom styled form controls that should retain their expected semantics and functionality, we have to consider the following: Many form elements can be styled directly through standard and browser specific selectors, as well as through some clever styling of markup patterns. We should leverage these native options before reinventing any wheels. It is important to preserve the underlying semantics of interactive controls. We must not unintentionally exclude people who use assistive technologies (ATs) that rely on these semantics. Ma… 2018 Scott O'Hara scottohara 2018-12-13T00:00:00+00:00 https://24ways.org/2018/inclusive-considerations-when-restyling-form-controls/ code
169 169 Incite A Riot Given its relatively limited scope, HTML can be remarkably expressive. With a bit of lateral thinking, we can mark up content such as tag clouds and progress meters, even when we don’t have explicit HTML elements for those patterns. Suppose we want to mark up a short conversation: Alice: I think Eve is watching. Bob: This isn’t a cryptography tutorial …we’re in the wrong example! A note in the the HTML 4.01 spec says it’s okay to use a definition list: Another application of DL, for example, is for marking up dialogues, with each DT naming a speaker, and each DD containing his or her words. That would give us: <dl> <dt>Alice</dt>: <dd>I think Eve is watching.</dd> <dt>Bob</dt>: <dd>This isn't a cryptography tutorial ...we're in the wrong example!</dd> </dl> This usage of a definition list is proof that writing W3C specifications and smoking crack are not mutually exclusive activities. “I think Eve is watching” is not a definition of “Alice.” If you (ab)use a definition list in this way, Norm will hunt you down. The conversation problem was revisited in HTML5. What if dt and dd didn’t always mean “definition title” and “definition description”? A new element was forged: dialog. Now the the “d” in dt and dd doesn’t stand for “definition”, it stands for “dialog” (or “dialogue” if you can spell): <dialog> <dt>Alice</dt>: <dd>I think Eve is watching.</dd> <dt>Bob</dt>: <dd>This isn't a cryptography tutorial ...we're in the wrong example!</dd> </dialog> Problem solved …except that dialog is no longer in the HTML5 spec. Hixie further expanded the meaning of dt and dd so that they could be used inside details (which makes sense—it starts with a “d”) and figure (…um). At the same time as the content model of details and figure were being updated, the completely-unrelated dialog element was dropped. Back to the drawing board, or in this case, the HTML 4.01 specification. The spec defines the cite element thusly: Contains a citation or a reference to other sources. Perfect! There’s even an … 2009 Jeremy Keith jeremykeith 2009-12-11T00:00:00+00:00 https://24ways.org/2009/incite-a-riot/ code
19 19 In Their Own Write: Web Books and their Authors The currency of written communication — words on the page, words on the screen — comprises many denominations. To further our ends in web design and development, we freely spend and receive several: tweets aphoristic and trenchant, banal and perfunctory; blog posts and articles that call us to action or reflection; anecdotes, asides, comments, essays, guides, how-tos, manuals, musings, notes, opinions, stories, thoughts, tips pro and not-so-pro. So many, many words. Our industry (so much more than this, but what on earth are we, collectively?), our community thrives on writing and sharing knowledge and experience. 24 ways is a case in point. Everyone can learn and contribute through reading and writing — it’s what we’ve always done. To web authors and readers seeking greater returns, though, broader culture has vouchsafed an enduring and singular artefact: the book. Last month I asked a small sample of web book authors if they would be prepared to answer a few questions; most of them kindly agreed. In spirit, the survey was informal: I had neither hypothesis nor unground axe. I work closely with writers — and yes, I’ve edited or copy-edited books by several of the authors I surveyed — and wanted to share their thoughts about what it was like to write a book (“…it was challenging to find a coherent narrative”), why they did it (“Who wouldn’t want to?”) and what they learned from the experience (“That I could!”). Reasons for writing a book In web development the connection between authors and readers is unusually close and immediate. Working in our medium precipitates a unity that’s rare elsewhere. Yet writing and publishing a book, even during the current books revolution, is something only a few of us attempt and it remains daunting and a little remote. What spurs an author to try it? For some, it’s a deeply held resistance to prevailing trends: I felt that designers and developers needed to be shaken out of what seemed to me had been years of stagnation. —Andrew Clarke Or even a desire to protect us from… 2013 Owen Gregory owengregory 2013-12-15T00:00:00+00:00 https://24ways.org/2013/web-books/ content
327 327 Improving Form Accessibility with DOM Scripting The form label element is an incredibly useful little element – it lets you link the form field unquestionably with the descriptive label text that sits alongside or above it. This is a very useful feature for people using screen readers, but there are some problems with this element. What happens if you have one piece of data that, for various reasons (validation, the way your data is collected/stored etc), needs to be collected using several form elements? The classic example is date of birth – ideally, you’ll ask for the date of birth once but you may have three inputs, one each for day, month and year, that you also need to provide hints about the format required. The problem is that to be truly accessible you need to label each field. So you end up needing something to say “this is a date of birth”, “this is the day field”, “this is the month field” and “this is the day field”. Seems like overkill, doesn’t it? And it can uglify a form no end. There are various ways that you can approach it (and I think I’ve seen them all). Some people omit the label and rely on the title attribute to help the user through; others put text in a label but make the text 1 pixel high and merging in to the background so that screen readers can still get that information. The most common method, though, is simply to set the label to not display at all using the CSS display:none property/value pairing (a technique which, for the time being, seems to work on most screen readers). But perhaps we can do more with this? The technique I am suggesting as another alternative is as follows (here comes the pseudo-code): Start with a totally valid and accessible form Ensure that each form input has a label that is linked to its related form control Apply a class to any label that you don’t want to be visible (for example superfluous) Then, through the magic of unobtrusive JavaScript/the DOM, manipulate the page as follows once the page has loaded: Find all the label elements that are marked as superfluous and hide them Find ou… 2005 Ian Lloyd ianlloyd 2005-12-03T00:00:00+00:00 https://24ways.org/2005/improving-form-accessibility-with-dom-scripting/ code
189 189 Ignorance Is Bliss This is a true story. Meet Mike Mike’s a smart guy. He knows a great browser when he sees one. He uses Firefox on his Windows PC at work and Safari on his Mac at home. Mike asked us to design a Web site for his business. So we did. We wanted to make the best Web site for Mike that we could, so we used all of the CSS tools that are available today. That meant using RGBa colour to layer elements, border-radius to add subtle rounded corners and (possibly most experimental of all new CSS), generated gradients. The home page Mike sees in Safari on his Mac Mike loves what he sees. Meet Sam Sam works with Mike. She uses Internet Explorer 7 because it came on the Windows laptop that the company bought her when she joined. The home page Sam sees in Internet Explorer 7 on her PC Sam loves the new Web site too. How could both of them be happy when they experienced the Web site differently? The new WYSIWYG When I first presented my designs to Mike and Sam, I showed them a Web page made with HTML and CSS in their respective browsers and not a picture of a Web page. By showing neither a static image of my design, I set none of the false expectations that, by definition, a static Photoshop or Fireworks visual would have established. Mike saw rounded corners and subtle shadows in Firefox and Safari. Sam saw something equally as nice, just a little different, in Internet Explorer. Both were very happy because they saw something that they liked. Neither knew, or needed to know, about the subtle differences between browsers. Their users don’t need to know either. That’s because in the real world, people using the Web don’t find a Web site that they like, then open up another browser to check that it looks they same. They simply buy what they came to buy, read what what they came to read, do what they came to do, then get on with their lives in blissful ignorance of what they might be seeing in another browser. Often when I talk or write about using progressive CSS, people ask me, “How do you convince clients to … 2009 Andy Clarke andyclarke 2009-12-23T00:00:00+00:00 https://24ways.org/2009/ignorance-is-bliss/ business
9 9 How to Write a Book Were you recently inspired to write a book after reading Owen Gregory’s compendium of author insights? Maybe so inspired to strike out on your own and self-publish? Based on personal experience, writing a book is hard. It requires a great deal of research, experience, and patience. To be able to consolidate your thoughts and what you’ve learned into a sensible and readable tome is an admirable feat. To decide to self-publish and take on yourself all of the design, printing, distribution, and so much more is tantamount to insanity. Again, based on personal experience. So, why might you want to self-publish? If you’ve spent many a late night doing cross-browser testing just to know that your site works flawlessly in twenty-four different browsers — including Mosaic, of course — then maybe you’ll understand the fun that comes from doing it all. Working with a publisher, you’re left to focus on one core thing: writing. That’s a good thing. A good publisher has the right resources to help you get your idea polished and the distribution network to get your book on store shelves around the world. It’s a very proud moment to be able to walk into a book store and see your book sitting there on the shelf. Self-publishing can also be a wonderful process as you get to own it from beginning to end. Every decision is yours and if you’re a control freak like me, this can be a very rewarding experience. While there are many aspects to self-publishing, I’m going to speak to just one of them: creating an ebook. Formats In creating an ebook, you first need to decide what formats you wish to support. There are three main formats, each with their own pros and cons: PDF EPUB MOBI PDFs are supported on almost every device (Windows, Mac, Kindle, iPad, Android, etc.) and can even be a stepping stone to creating a print version of your book. PDFs allow for full typographic and design control, but at the cost of needing to fit things into a predefined page layout. Is it US Letter or A4? Or is it a format that isn’t easily… 2013 Jonathan Snook jonathansnook 2013-12-19T00:00:00+00:00 https://24ways.org/2013/how-to-write-a-book/ content
248 248 How to Use Audio on the Web I know what you’re thinking. I never never want to hear sound anywhere near a browser, ever ever, wow! 🙉 You’re having flashbacks, flashbacks to the days of yore, when we had a <bgsound> element and yup did everyone think that was the most rad thing since <blink>. I mean put those two together with a <marquee>, only use CSS colour names, make sure your borders were all set to ridge and you’ve got yourself the neatest website since 1998. The sound played when the website loaded and you could play a MIDI file as well! Everyone could hear that wicked digital track you chose. Oh, surfing was gnarly back then. Yes it is 2018, the end of in fact, soon to be 2019. We are certainly living in the future. Hoverboards self driving cars, holodecks VR headsets, rocket boots drone racing, sound on websites get real, Ruth. We can’t help but be jaded, even though the <bgsound> element is depreciated, and the autoplay policy appeared this year. Although still in it’s infancy, the policy “controls when video and audio is allowed to autoplay”, which should reduce the somewhat obtrusive playing of sound when a website or app loads in the future. But then of course comes the question, having lived in a muted present for so long, where and why would you use audio? ✨ Showcase Time ✨ There are some incredible uses of audio on websites today. This is my personal favourite futurelibrary.no, a site from Norway chronicling books that have been published from a forest of trees planted precisely for the books themselves. The sound effects are lovely, adding to the overall experience. futurelibrary.no Another site that executes this well is pottermore.com. The Hogwarts WebGL simulation uses both sound effects and ambient background music and gives a great experience. The button hovers are particularly good. pottermore.com Eighty-six and a half years is a beautiful narrative site, documenting the musings of an eighty-six and a half year old man. The background music playing on this site is not offensive, it adds to the experience. Eighty-six an… 2018 Ruth John ruthjohn 2018-12-22T00:00:00+00:00 https://24ways.org/2018/how-to-use-audio-on-the-web/ design
308 308 How to Make a Chrome Extension to Delight (or Troll) Your Friends If you’re like me, you grew up drawing mustaches on celebrities. Every photograph was subject to your doodling wrath, and your brilliance was taken to a whole new level with computer programs like Microsoft Paint. The advent of digital cameras meant that no one was safe from your handiwork, especially not your friends. And when you finally got your hands on Photoshop, you spent hours maniacally giggling at your artistic genius. But today is different. You’re a serious adult with important things to do and a reputation to uphold. You keep up with modern web techniques and trends, and have little time for fun other than a random Giphy on Slack… right? Nope. If there’s one thing 2016 has taught me, it’s that we—the self-serious, world-changing tech movers and shakers of the universe—haven’t changed one bit from our younger, more delightable selves. How do I know? This year I created a Chrome extension called Tabby Cat and watched hundreds of thousands of people ditch productivity for randomly generated cats. Tabby Cat replaces your new tab page with an SVG cat featuring a silly name like “Stinky Dinosaur” or “Tiny Potato”. Over time, the cats collect goodies that vary in absurdity from fishbones to lawn flamingos to Raybans. Kids and adults alike use this extension, and analytics show the majority of use happens Monday through Friday from 9-5. The popularity of Tabby Cat has convinced me there’s still plenty of room in our big, grown-up hearts for fun. Today, we’re going to combine the formula behind Tabby Cat with your intrinsic desire to delight (or troll) your friends, and create a web app that generates your friends with random objects and environments of your choosing. You can publish it as a Chrome extension to replace your new tab, or simply host it as a website and point to it with the New Tab Redirect extension. Here’s a sneak peek at my final result featuring my partner, my cat, and I in cheerfully weird accessories. Your result will look however you want it to. Along the way, we’ll cover how to bui… 2016 Leslie Zacharkow lesliezacharkow 2016-12-08T00:00:00+00:00 https://24ways.org/2016/how-to-make-a-chrome-extension/ code
73 73 How to Make Your Site Look Half-Decent in Half an Hour Programmers like me are often intimidated by design – but a little effort can give a huge return on investment. Here are one coder’s tips for making any site quickly look more professional. I am a programmer. I am not a designer. I have a degree in computer science, and I don’t mind Comic Sans. (It looks cheerful. Move on.) But although I am a programmer, I want to make my sites look attractive. This is partly out of vanity, and partly realism. Vanity because I want people to think my work is good, and realism because the research shows that people won’t think a site is credible unless it also looks attractive. For a very long time after I became a programmer, I was scared of design. Design seemed to consist of complicated rules that weren’t written down anywhere, plus an unlearnable sense of taste, possessed only by a black-clad elite. But a little while ago, I decided to do my best to hack what it took to make my own projects look vaguely attractive. And although this doesn’t come close to the effect a professional designer could achieve, gathering these resources for improving a site’s look and feel has been really helpful. If I hadn’t figured out some basic design shortcuts, it’s unlikely that a weekend hack of mine would have ended up on page three of the Daily Mail. And too often now, I see excellent programming projects that don’t reach the audience they deserve, simply because their design doesn’t match their execution. So, if you are a developer, my Christmas present to you is this: my own collection of hacks that, used rightly, can make your personal programming projects look professional, quickly. None are hard to learn, most are free, and they let you focus on writing code. One thing to note about these tips, though. They are a personal, pragmatic compilation. They are suggestions, not a definitive guide. You will definitely get better results by working with a professional designer, and by studying design more deeply. If you are a designer, I would love to hear your suggestions for the b… 2012 Anna Powell-Smith annapowellsmith 2012-12-16T00:00:00+00:00 https://24ways.org/2012/how-to-make-your-site-look-half-decent/ design
69 69 How to Do a UX Review A UX review is where an expert goes through a website looking for usability and experience problems and makes recommendations on how to fix them. I’ve completed a number of UX reviews over my twelve years working as a user experience consultant and I thought I’d share my approach. I’ll be talking about reviewing websites here; you can adapt the approach for web apps, or mobile or desktop apps. Why conduct a review Typically, a client asks for a review to be undertaken by a trusted and, ideally, detached third party who either works for an agency or is a freelancer. Often they may ask a new member of the UX team to complete one, or even set it as a task for a job interview. This indicates the client is looking for an objective view, seen from the outside as a user would see the website. I always suggest conducting some user research rather than a review. Users know their goals and watching them make (what you might think of as) mistakes on the website is invaluable. Conducting research with six users can give you six hours’ worth of review material from six viewpoints. In short, user research can identify more problems and show how common those problems might be. There are three reasons, though, why a review might better suit client needs than user research: Quick results: user research and analysis takes at least three weeks. Limited budget: the £6–10,000 cost to run user research is about twice the cost of a UX review. Users are hard to reach: in the business-to-business world, reaching users is difficult, especially if your users hold senior positions in their organisations. Working with consumers is much easier as there are often more of them. There is some debate about the benefits of user research over UX review. In my experience you learn far more from research, but opinions differ. Be objective The number one mistake many UX reviewers make is reporting back the issues they identify as their opinion. This can cause credibility problems because you have to keep justifying why your opinion is corr… 2015 Joe Leech joeleech 2015-12-03T00:00:00+00:00 https://24ways.org/2015/how-to-do-a-ux-review/ ux
114 114 How To Create Rockband'ism There are mysteries happening in the world of business these days. We want something else by now. The business of business has to become more than business. We want to be able to identify ourselves with the brands we purchase and we want them to do good things. We want to feel cool because we buy stuff, and we don’t just want a shopping experience – we want an engagement with a company we can relate to. Let me get back to “feeling cool” – if we want to feel cool, we might get the companies we buy from to support that. That’s why I am on a mission to make companies into rockbands. Now when I say rockbands – I don’t mean the puke-y, drunky, nasty stuff that some people would highlight is also a part of rockbands. Therefore I have created my own word “rockband’ism”. This word is the definition of a childhood dream version of being in a rockband – the feeling of being more respected and loved and cool, than a cockroach or a suit on the floor of a company. Rockband’ism Rockband’ism is what we aspire to, to feel cool and happy. So basically what I am arguing is that companies should look upon themselves as rockbands. Because the world has changed, so business needs to change as well. I have listed a couple of things you could do today to become a rockband, as a person or as a company. 1 – Give your support to companies that make a difference to their surroundings – if you are buying electronics look up what the electronic producers are doing of good in the world (check out the Greenpeace Guide to Greener Electronics). 2 – Implement good karma in your everyday life (and do well by doing good). What you give out you get back at some point in some shape – this can also be implemented for business. 3 – WWRD? – “what would a rockband do”? or if you are into Kenny Rogers – what would he do in any given situation? This will also show yourself where your business or personal integrity lies because you actually act as a person or a rockband you admire. 4 – Start leading instead of managing – If we can measure stuff wh… 2008 Henriette Weber henrietteweber 2008-12-07T00:00:00+00:00 https://24ways.org/2008/how-to-create-rockbandism/ business
55 55 How Tabs Should Work Tabs in browsers (not browser tabs) are one of the oldest custom UI elements in a browser that I can think of. They’ve been done to death. But, sadly, most of the time I come across them, the tabs have been badly, or rather partially, implemented. So this post is my definition of how a tabbing system should work, and one approach of implementing that. But… tabs are easy, right? I’ve been writing code for tabbing systems in JavaScript for coming up on a decade, and at one point I was pretty proud of how small I could make the JavaScript for the tabbing system: var tabs = $('.tab').click(function () { tabs.hide().filter(this.hash).show(); }).map(function () { return $(this.hash)[0]; }); $('.tab:first').click(); Simple, right? Nearly fits in a tweet (ignoring the whole jQuery library…). Still, it’s riddled with problems that make it a far from perfect solution. Requirements: what makes the perfect tab? All content is navigable and available without JavaScript (crawler-compatible and low JS-compatible). ARIA roles. The tabs are anchor links that: are clickable have block layout have their href pointing to the id of the panel element use the correct cursor (i.e. cursor: pointer). Since tabs are clickable, the user can open in a new tab/window and the page correctly loads with the correct tab open. Right-clicking (and Shift-clicking) doesn’t cause the tab to be selected. Native browser Back/Forward button correctly changes the state of the selected tab (think about it working exactly as if there were no JavaScript in place). The first three points are all to do with the semantics of the markup and how the markup has been styled. I think it’s easy to do a good job by thinking of tabs as links, and not as some part of an application. Links are navigable, and they should work the same way other links on the page work. The last three points are JavaScript problems. Let’s investigate that. The shitmus test Like a litmus test, here’s a couple of quick ways you can tell if a tabbing system is poorly implemented: Cha… 2015 Remy Sharp remysharp 2015-12-22T00:00:00+00:00 https://24ways.org/2015/how-tabs-should-work/ code
159 159 How Media Studies Can Massage Your Message A young web designer once told his teacher ‘just get to the meat already.’ He was frustrated with what he called the ‘history lessons and name-dropping’ aspects of his formal college course. He just wanted to learn how to build Web sites, not examine the reasons why. Technique and theory are both integrated and necessary portions of a strong education. The student’s perspective has direct value, but also holds a distinct sorrow: Knowing the how without the why creates a serious problem. Without these surrounding insights we cannot tap into the influence of the history and evolved knowledge that came before. We cannot properly analyze, criticize, evaluate and innovate beyond the scope of technique. History holds the key to transcending former mistakes. Philosophy encourages us to look at different points of view. Studying media and social history empowers us as Web workers by bringing together myriad aspects of humanity in direct relation to the environment of society and technology. Having an understanding of media, communities, communication arts as well as logic, language and computer savvy are all core skills of the best of web designers in today’s medium. Controlling the Message ‘The computer can’t tell you the emotional story. It can give you the exact mathematical design, but what’s missing is the eyebrows.’ – Frank Zappa Media is meant to express an idea. The great media theorist Marshall McLuhan suggests that not only is media interesting because it’s about the expression of ideas, but that the media itself actually shapes the way a given idea is perceived. This is what McLuhan meant when he uttered those famous words: ‘The medium is the message.’ If instead of actually serving a steak to a vegetarian friend, what might a painting of the steak mean instead? Or a sculpture of a cow? Depending upon the form of media in question, the message is altered. Figure 1 Must we know the history of cows to appreciate the steak on our plate? Perhaps not, but if we begin to examine how that meat came to be … 2007 Molly Holzschlag mollyholzschlag 2007-12-22T00:00:00+00:00 https://24ways.org/2007/how-media-studies-can-massage-your-message/ ux
10 10 Home Kanban for Domestic Bliss My wife is an architect. I’m a leader of big technical teams these days, but for many years after I was a dev I was a project/program manager. Our friends and family used to watch Grand Designs and think that we would make the ideal team — she could design, I could manage the project of building or converting whatever dream home we wanted. Then we bought a house. A Victorian terrace in the north-east of England that needed, well, a fair bit of work. The big decisions were actually pretty easy: yes, we should knock through a double doorway from the dining room to the lounge; yes, we should strip out everything from the utility room and redo it; yes, we should roll back the hideous carpet in the bedrooms upstairs and see if we could restore the original wood flooring. Those could be managed like a project. What couldn’t be was all the other stuff. Incremental improvements are harder to schedule, and in a house that’s over a hundred years old you never know what you’re going to find when you clear away some tiles, or pull up the carpets, or even just spring-clean the kitchen (“Erm, hon? The paint seems to be coming off. Actually, so does the plaster…”). A bit like going in to fix bugs in code or upgrade a machine — sometimes you end up quite far down the rabbit hole. And so, as we tried to fit in those improvements in our evenings and weekends, we found ourselves disagreeing. Arguing, even. We were both trying to do the right thing (make the house better) but since we were fitting it in where we could, we often didn’t get to talk and agree in detail what was needed (exactly how to make the house better). And it’s really frustrating when you stay up late doing something, just to find that your other half didn’t mean that they meant this instead, and so your effort was wasted. Then I saw this tweet from my friend and colleague Jamie Arnold, who was using the same kanban board approach at home as we had instituted at the UK Government Digital Service to manage our portfolio. Mrs Arnold embraces Kanban wall at ho… 2013 Meri Williams meriwilliams 2013-12-14T00:00:00+00:00 https://24ways.org/2013/home-kanban-for-domestic-bliss/ process
121 121 Hide And Seek in The Head If you want your JavaScript-enhanced pages to remain accessible and understandable to scripted and noscript users alike, you have to think before you code. Which functionalities are required (ie. should work without JavaScript)? Which ones are merely nice-to-have (ie. can be scripted)? You should only start creating the site when you’ve taken these decisions. Special HTML elements Once you have a clear idea of what will work with and without JavaScript, you’ll likely find that you need a few HTML elements for the noscript version only. Take this example: A form has a nifty bit of Ajax that automatically and silently sends a request once the user enters something in a form field. However, in order to preserve accessibility, the user should also be able to submit the form normally. So the form should have a submit button in noscript browsers, but not when the browser supports sufficient JavaScript. Since the button is meant for noscript browsers, it must be hard-coded in the HTML: <input type="submit" value="Submit form" id="noScriptButton" /> When JavaScript is supported, it should be removed: var checkJS = [check JavaScript support]; window.onload = function () { if (!checkJS) return; document.getElementById('noScriptButton').style.display = 'none'; } Problem: the load event Although this will likely work fine in your testing environment, it’s not completely correct. What if a user with a modern, JavaScript-capable browser visits your page, but has to wait for a huge graphic to load? The load event fires only after all assets, including images, have been loaded. So this user will first see a submit button, but then all of a sudden it’s removed. That’s potentially confusing. Fortunately there’s a simple solution: play a bit of hide and seek in the <head>: var checkJS = [check JavaScript support]; if (checkJS) { document.write('<style>#noScriptButton{display: none}</style>'); } First, check if the browser supports enough JavaScript. If it does, document.write an extra <style> element that hides the b… 2006 Peter-Paul Koch ppk 2006-12-06T00:00:00+00:00 https://24ways.org/2006/hide-and-seek-in-the-head/ code
56 56 Helping VIPs Care About Performance Making a site feel super fast is the easy part of performance work. Getting people around you to care about site speed is a much bigger challenge. How do we keep the site fast beyond the initial performance work? Keeping very important people like your upper management or clients invested in performance work is critical to keeping a site fast and empowering other designers and developers to contribute. The work to get others to care is so meaty that I dedicated a whole chapter to the topic in my book Designing for Performance. When I speak at conferences, the majority of questions during Q&A are on this topic. When I speak to developers and designers who care about performance, getting other people at one’s organization or agency to care becomes the most pressing question. My primary response to folks who raise this issue is the question: “What metric(s) do your VIPs care about?” This is often met with blank stares and raised eyebrows. But it’s also our biggest clue to what we need to do to help empower others to care about performance and work on it. Every organization and executive is different. This means that three major things vary: the primary metrics VIPs care about; the language they use about measuring success; and how change is enacted. By clueing in to these nuances within your organization, you can get a huge leg up on crafting a successful pitch about performance work. Let’s start with the metric that we should measure. Sure, (most) everybody cares about money - but is that really the metric that your VIPs are looking at each day to measure the success or efficacy of your site? More likely, dollars are the end game, but the metrics or key performance indicators (KPIs) people focus on might be: rate of new accounts created/signups cost of acquiring or retaining a customer visitor return rate visitor bounce rate favoriting or another interaction rate These are just a few examples, but they illustrate how wide-ranging the options are that people care about. I find that developers and designers haven’t… 2015 Lara Hogan larahogan 2015-12-08T00:00:00+00:00 https://24ways.org/2015/helping-vips-care-about-performance/ business
179 179 Have a Field Day with HTML5 Forms Forms are usually seen as that obnoxious thing we have to markup and style. I respectfully disagree: forms (on a par with tables) are the most exciting thing we have to work with. Here we’re going to take a look at how to style a beautiful HTML5 form using some advanced CSS and latest CSS3 techniques. I promise you will want to style your own forms after you’ve read this article. Here’s what we’ll be creating: The form. (Icons from Chalkwork Payments) Meaningful markup We’re going to style a simple payment form. There are three main sections on this form: The person’s details The address details The credit card details We are also going to use some of HTML5’s new input types and attributes to create more meaningful fields and use less unnecessary classes and ids: email, for the email field tel, for the telephone field number, for the credit card number and security code required, for required fields placeholder, for the hints within some of the fields autofocus, to put focus on the first input field when the page loads There are a million more new input types and form attributes on HTML5, and you should definitely take a look at what’s new on the W3C website. Hopefully this will give you a good idea of how much more fun form markup can be. A good foundation Each section of the form will be contained within its own fieldset. In the case of the radio buttons for choosing the card type, we will enclose those options in another nested fieldset. We will also be using an ordered list to group each label / input pair. This will provide us with a (kind of) semantic styling hook and it will also make the form easier to read when viewing with no CSS applied: The unstyled form So here’s the markup we are going to be working with: <form id=payment> <fieldset> <legend>Your details</legend> <ol> <li> <label for=name>Name</label> <input id=name name=name type=text placeholder="First and last name" required autofocus> </li> <li> <label for=email>Email</label> <input id=… 2009 Inayaili de León Persson inayailideleon 2009-12-03T00:00:00+00:00 https://24ways.org/2009/have-a-field-day-with-html5-forms/ code
316 316 Have Your DOM and Script It Too When working with the XMLHttpRequest object it appears you can only go one of three ways: You can stay true to the colorful moniker du jour and stick strictly to the responseXML property You can play with proprietary – yet widely supported – fire and inject the value of responseText property into the innerHTML of an element of your choosing Or you can be eval() and parse JSON or arbitrary JavaScript delivered via responseText But did you know that there’s a fourth option giving you the best of the latter two worlds? Mint uses this unmentioned approach to grab fresh HTML and run arbitrary JavaScript simultaneously. Without relying on eval(). “But wait-”, you might say, “when would I need to do this?” Besides the example below this technique is handy for things like tab groups that need initialization onload but miss the main onload event handler by a mile thanks to asynchronous scripting. Consider the problem Originally Mint used option 2 to refresh or load new tabs into individual Pepper panes without requiring a full roundtrip to the server. This was all well and good until I introduced the new Client Mode which when enabled allows anyone to view a Mint installation without being logged in. If voyeurs are afoot as Client Mode is disabled, the next time they refresh a pane the entire login page is inserted into the current document. That’s not very helpful so I needed a way to redirect the current document to the login page. Enter the solution Wouldn’t it be cool if browsers interpreted the contents of script tags crammed into innerHTML? Sure, but unfortunately, that just wasn’t meant to be. However like the body element, image elements have an onload event handler. When the image has fully loaded the handler runs the code applied to it. See where I’m going with this? By tacking a tiny image (think single pixel, transparent spacer gif – shudder) onto the end of the HTML returned by our Ajax call, we can smuggle our arbitrary JavaScript into the existing document. The image is added to the DOM, and … 2005 Shaun Inman shauninman 2005-12-24T00:00:00+00:00 https://24ways.org/2005/have-your-dom-and-script-it-too/ code
309 309 HTTP/2 Server Push and Service Workers: The Perfect Partnership Being a web developer today is exciting! The web has come a long way since its early days and there are so many great technologies that enable us to build faster, better experiences for our users. One of these technologies is HTTP/2 which has a killer feature known as HTTP/2 Server Push. During this year’s Chrome Developer Summit, I watched a really informative talk by Sam Saccone, a Software Engineer on the Google Chrome team. He gave a talk entitled Planning for Performance, and one of the topics that he covered immediately piqued my interest; the idea that HTTP/2 Server Push and Service Workers were the perfect web performance combination. If you’ve never heard of HTTP/2 Server Push before, fear not - it’s not as scary as it sounds. HTTP/2 Server Push simply allows the server to send data to the browser without having to wait for the browser to explicitly request it first. In this article, I am going to run through the basics of HTTP/2 Server Push and show you how, when combined with Service Workers, you can deliver the ultimate in web performance to your users. What is HTTP/2 Server Push? When a user navigates to a URL, a browser will make an HTTP request for the underlying web page. The browser will then scan the contents of the HTML document for any assets that it may need to retrieve such as CSS, JavaScript or images. Once it finds any assets that it needs, it will then make multiple HTTP requests for each resource that it needs and begin downloading one by one. While this approach works well, the problem is that each HTTP request means more round trips to the server before any data arrives at the browser. These extra round trips take time and can make your web pages load slower. Before we go any further, let’s see what this might look like when your browser makes a request for a web page. If you were to view this in the developer tools of your browser, it might look a little something like this: As you can see from the image above, once the HTML file has been downloaded and parsed, the browser then mak… 2016 Dean Hume deanhume 2016-12-15T00:00:00+00:00 https://24ways.org/2016/http2-server-push-and-service-workers/ code
177 177 HTML5: Tool of Satan, or Yule of Santa? It would lead to unseasonal arguments to discuss the title of this piece here, and the arguments are as indigestible as the fourth turkey curry of the season, so we’ll restrict our article to the practical rather than the philosophical: what HTML5 can you reasonably expect to be able to use reliably cross-browser in the early months of 2010? The answer is that you can use more than you might think, due to the seasonal tinsel of feature-detection and using the sparkly pixie-dust of IE-only VML (but used in a way that won’t damage your Elf). Canvas canvas is a 2D drawing API that defines a blank area of the screen of arbitrary size, and allows you to draw on it using JavaScript. The pictures can be animated, such as in this canvas mashup of Wolfenstein 3D and Flickr. (The difference between canvas and SVG is that SVG uses vector graphics, so is infinitely scalable. It also keeps a DOM, whereas canvas is just pixels so you have to do all your own book-keeping yourself in JavaScript if you want to know where aliens are on screen, or do collision detection.) Previously, you needed to do this using Adobe Flash or Java applets, requiring plugins and potentially compromising keyboard accessibility. Canvas drawing is supported now in Opera, Safari, Chrome and Firefox. The reindeer in the corner is, of course, Internet Explorer, which currently has zero support for canvas (or SVG, come to that). Now, don’t pull a face like all you’ve found in your Yuletide stocking is a mouldy satsuma and a couple of nuts—that’s not the end of the story. Canvas was originally an Apple proprietary technology, and Internet Explorer had a similar one called Vector Markup Language which was submitted to the W3C for standardisation in 1998 but which, unlike canvas, was not blessed with retrospective standardisation. What you need, then, is some way for Internet Explorer to translate canvas to VML on-the-fly, while leaving the other, more standards-compliant browsers to use the HTML5. And such a way exists—it’s a JavaScript library called … 2009 Bruce Lawson brucelawson 2009-12-05T00:00:00+00:00 https://24ways.org/2009/html5-tool-of-satan-or-yule-of-santa/ code
80 80 HTML5 Video Bumpers Video is a bigger part of the web experience than ever before. With native browser support for HTML5 video elements freeing us from the tyranny of plugins, and the availability of faster internet connections to the workplace, home and mobile networks, it’s now pretty straightforward to publish video in a way that can be consumed in all sorts of ways on all sorts of different web devices. I recently worked on a project where the client had shot some dedicated video shorts to publish on their site. They also had some five-second motion graphics produced to top and tail the videos with context and branding. This pretty common requirement is a great idea on the web, where a user might land at your video having followed a link and be viewing a page without much context. Known as bumpers, these short introduction clips help brand a video and make it look a lot more professional. Adding bumpers to a video The simplest way to add bumpers to a video would be to edit them on to the start and end of the video file itself. Cooking the bumpers into the video file is easy, but should you ever want to update them it can become a real headache. If the branding needs updating, for example, you’d need to re-edit and re-encode all your videos. Not a fun task. What if the bumpers could be added dynamically? That would enable you to use the same bumper for multiple videos (decreasing download time for users who might watch more than one) and to update the bumpers whenever you wanted. You could change them seasonally, update them for special promotions, run different advertising slots, perform multivariate testing, or even target different bumpers to different users. The trade-off, of course, is that if you dynamically add your bumpers, there’s a chance that a user in a given circumstance might not see the bumper. For example, if the main video feature was uploaded to YouTube, you’d have no way to control the playback. As always, you need to weigh up the pros and cons and make your choice. HTML5 bumpers If you wanted to dyna… 2012 Drew McLellan drewmclellan 2012-12-01T00:00:00+00:00 https://24ways.org/2012/html5-video-bumpers/ code
18 18 Grunt for People Who Think Things Like Grunt are Weird and Hard Front-end developers are often told to do certain things: Work in as small chunks of CSS and JavaScript as makes sense to you, then concatenate them together for the production website. Compress your CSS and minify your JavaScript to make their file sizes as small as possible for your production website. Optimize your images to reduce their file size without affecting quality. Use Sass for CSS authoring because of all the useful abstraction it allows. That’s not a comprehensive list of course, but those are the kind of things we need to do. You might call them tasks. I bet you’ve heard of Grunt. Well, Grunt is a task runner. Grunt can do all of those things for you. Once you’ve got it set up, which isn’t particularly difficult, those things can happen automatically without you having to think about them again. But let’s face it: Grunt is one of those fancy newfangled things that all the cool kids seem to be using but at first glance feels strange and intimidating. I hear you. This article is for you. Let’s nip some misconceptions in the bud right away Perhaps you’ve heard of Grunt, but haven’t done anything with it. I’m sure that applies to many of you. Maybe one of the following hang-ups applies to you. I don’t need the things Grunt does You probably do, actually. Check out that list up top. Those things aren’t nice-to-haves. They are pretty vital parts of website development these days. If you already do all of them, that’s awesome. Perhaps you use a variety of different tools to accomplish them. Grunt can help bring them under one roof, so to speak. If you don’t already do all of them, you probably should and Grunt can help. Then, once you are doing those, you can keep using Grunt to do more for you, which will basically make you better at doing your job. Grunt runs on Node.js — I don’t know Node You don’t have to know Node. Just like you don’t have to know Ruby to use Sass. Or PHP to use WordPress. Or C++ to use Microsoft Word. I have other ways to do the things Grunt could do for me Are the… 2013 Chris Coyier chriscoyier 2013-12-11T00:00:00+00:00 https://24ways.org/2013/grunt-is-not-weird-and-hard/ code
68 68 Grid, Flexbox, Box Alignment: Our New System for Layout Three years ago for 24 ways 2012, I wrote an article about a new CSS layout method I was excited about. A specification had emerged, developed by people from the Internet Explorer team, bringing us a proper grid system for the web. In 2015, that Internet Explorer implementation is still the only public implementation of CSS grid layout. However, in 2016 we should be seeing it in a new improved form ready for our use in browsers. Grid layout has developed hidden behind a flag in Blink, and in nightly builds of WebKit and, latterly, Firefox. By being developed in this way, breaking changes could be safely made to the specification as no one was relying on the experimental implementations in production work. Another new layout method has emerged over the past few years in a more public and perhaps more painful way. Shipped prefixed in browsers, The flexible box layout module (flexbox) was far too tempting for developers not to use on production sites. Therefore, as changes were made to the specification, we found ourselves with three different flexboxes, and browser implementations that did not match one another in completeness or in the version of specified features they supported. Owing to the different ways these modules have come into being, when I present on grid layout it is often the very first time someone has heard of the specification. A question I keep being asked is whether CSS grid layout and flexbox are competing layout systems, as though it might be possible to back the loser in a CSS layout competition. The reality, however, is that these two methods will sit together as one system for doing layout on the web, each method playing to certain strengths and serving particular layout tasks. If there is to be a loser in the battle of the layouts, my hope is that it will be the layout frameworks that tie our design to our markup. They have been a necessary placeholder while we waited for a true web layout system, but I believe that in a few years time we’ll be easily able to date a website to circa 2015 … 2015 Rachel Andrew rachelandrew 2015-12-15T00:00:00+00:00 https://24ways.org/2015/grid-flexbox-box-alignment-our-new-system-for-layout/ code
133 133 Gravity-Defying Page Corners While working on Stikkit, a “page curl” came to be. Not being as crafty as Veerle, you see. I fired up Photoshop to see what could be. “Another copy is running on the network“ … oopsie. With license issues sorted out and a concept in mind I set out to create something flexible and refined. One background image and code that is sure to be lean. A simple solution for lazy people like me. The curl I’ll be showing isn’t a curl at all. It’s simply a gradient that’s 18 pixels tall. With a fade to the left that’s diagonally aligned and a small fade on the right that keeps the illusion defined. Create a selection with the marquee tool (keeping in mind a reasonable minimum width) and drag a gradient (black to transparent) from top to bottom. Now drag a gradient (the background color of the page to transparent) from the bottom left corner to the top right corner. Finally, drag another gradient from the right edge towards the center, about 20 pixels or so. But the top is flat and can be positioned precisely just under the bottom right edge very nicely. And there it will sit, never ever to be busted by varying sizes of text when adjusted. <div id="page"> <div id="page-contents"> <h2>Gravity-Defying!</h2> <p>Lorem ipsum dolor ...</p> </div> </div> Let’s dive into code and in the markup you’ll see “is that an extra div?” … please don’t kill me? The #page div sets the width and bottom padding whose height is equal to the shadow we’re adding. The #page-contents div will set padding in ems to scale with the text size the user intends. The background color will be added here too but not overlapping the shadow where #page’s padding makes room. A simple technique that you may find amusing is to substitute a PNG for the GIF I was using. For that would be crafty and future-proof, too. The page curl could sit on any background hue. I hope you’ve enjoyed this easy little trick. It’s hardly earth-shattering, and arguably slick. But it could come in handy, you just never know. Happy Holidays! And pleasant dreams o… 2006 Dan Cederholm dancederholm 2006-12-24T00:00:00+00:00 https://24ways.org/2006/gravity-defying-page-corners/ design
225 225 Good Ideas Grow on Paper Great designers have one thing in common: their design process is centred on ideas; ideas that are more often than not developed on paper. Though it’s often tempting to take the path of least resistance, turning to the computer in the headlong rush to complete a project (often in the face of formidable client pressure), resist the urge and – for a truly great idea – start first on paper. The path of least resistance is often characterised by cliché and overused techniques – one per cent noise, border-radius, text-shadow – the usual suspects – techniques that are ten-a-penny at the gallery sites. Whilst all are useful, and technique and craft are important, great design isn’t about technique alone – it’s about technique in the service of good ideas. But how do we generate those ideas? Inspiration can certainly come to you out of the blue. When working as a designer in a role which often consists of incubating good ideas, however, idly waiting for the time-honoured lightbulb to appear above your head just isn’t good enough. We need to establish an environment where we tip the odds of getting good ideas in our favour. So, when faced with the blank canvas, what do we do to unlock the proverbial tidal wave of creativity? Fear not. We’re about to share with you a couple of stalwart techniques that will stand you in good stead when you need that good idea, in the face of the pressure of yet another looming deadline. Get the process right Where do ideas come from? In many cases they come from anywhere but the screen. Hence, our first commandment is to close the lid of your computer and, for a change, work on paper. It might seem strange, it might also seem like a distraction, but – trust us – the time invested here will more than pay off. Idea generation should be a process of rapid iteration, sketching and thinking aloud, all processes best undertaken in more fast paced, analogue media. Our tool of choice is the Sharpie and Flip Chart Combo©, intentionally low resolution to encourage lo-fi idea generation. In sho… 2010 The Standardistas thestandardistas 2010-12-13T00:00:00+00:00 https://24ways.org/2010/good-ideas-grow-on-paper/ process
222 222 Golden Spirals As building blocks go, the rectangle is not one to overwhelm the designer with decisions. On the face of it, you have two options: you can set the width, and the height. But despite this apparent simplicity, there are combinations of width and height that can look unbalanced. If a rectangle is too tall and slim, it might appear precarious. If it is not tall enough, it may simply look flat. But like a guitar string that’s out of tune, you can tweak the proportions little by little until a rectangle feels, as Goldilocks said, just right. A golden rectangle has its height and width in the golden ratio, which is approximately 1:1.618. These proportions have long been recognised as being aesthetically harmonious. Whether through instruction or by intuition, artists have understood how to exploit these proportions over the centuries. Examples can be found in classical architecture, medieval book construction, and even in the recent #newtwitter redesign. A mathematical curiosity The golden rectangle is unique, in that if you remove a square section from it, what is left behind is itself a golden rectangle. The removal of a square can be repeated on the rectangle that is left behind, and then repeated again, as many times as you like. This means that the golden rectangle can be treated as a building block for recursive patterns. In this article, we will exploit this property to build a golden spiral, using only HTML and CSS. The markup The HTML we’ll use for this study is simply a series of nested <div>s. <body> <div id="container"> <div class="cycle"> <div> <div> <div> <div class="cycle"> <div> <div> <div> <div class="cycle"> <div> <div> <div> <div class="cycle"></div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </body> The first of these has the class cycle, and so do… 2010 Drew Neil drewneil 2010-12-07T00:00:00+00:00 https://24ways.org/2010/golden-spirals/ design
180 180 Going Nuts with CSS Transitions I’m going to show you how CSS 3 transforms and WebKit transitions can add zing to the way you present images on your site. Laying the foundations First we are going to make our images look like mini polaroids with captions. Here’s the markup: <div class="polaroid pull-right"> <img src="../img/seal.jpg" alt=""> <p class="caption">Found this little cutie on a walk in New Zealand!</p> </div> You’ll notice we’re using a somewhat presentational class of pull-right here. This means the logic is kept separate from the code that applies the polaroid effect. The polaroid class has no positioning, which allows it to be used generically anywhere that the effect is required. The pull classes set a float and add appropriate margins—they can be used for things like blockquotes as well. .polaroid { width: 150px; padding: 10px 10px 20px 10px; border: 1px solid #BFBFBF; background-color: white; -webkit-box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4); -moz-box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4); box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4); } The actual polaroid effect itself is simply applied using padding, a border and a background colour. We also apply a nice subtle box shadow, using a property that is supported by modern WebKit browsers and Firefox 3.5+. We include the box-shadow property last to ensure that future browsers that support the eventual CSS3 specified version natively will use that implementation over the legacy browser specific version. The box-shadow property takes four values: three lengths and a colour. The first is the horizontal offset of the shadow—positive values place the shadow on the right, while negative values place it to the left. The second is the vertical offset, positive meaning below. If both of these are set to 0, the shadow is positioned equally on all four sides. The last length value sets the blur radius—the larger the number, the blurrier the shadow (therefore the darker you need to make the colour to have an effect). The colour value can be given in any forma… 2009 Natalie Downe nataliedowne 2009-12-14T00:00:00+00:00 https://24ways.org/2009/going-nuts-with-css-transitions/ code
278 278 Going Both Ways It’s that time of the year again: Santa is getting ready to travel the world. Up until now, girls and boys from all over have sent in letters asking for what they want. I hope that Santa and his elves have—unlike me—learned more than just English. On the Internet, those girls and boys want to participate in sharing their stories and videos of opening presents and of being with friends and family. Ah, yes, the wonders of user generated content. But more than that, people also want to be able to use sites in the language they know. While you and I might expect the text to read from left to right, not all languages do. Some go from right to left, such as Arabic and Hebrew. (Some also go from top to bottom, but for now, let’s just worry about those first two directions!) If we were building a site for girls and boys to send their letters to Santa, we need to consider having the interface in the language and direction that they prefer. On the elves’ side, they may be viewing the site in one direction but reading the user generated content in the other direction. We need to build a site that supports bidirectional (or bidi) text. Let’s take a look at some things to be aware of when it comes to building bidi interfaces. Setting the direction of the interface Right off the bat, we need to tell the browser what direction the text should be going in. To do this, we add the dir attribute to an HTML element and set it to either LTR (for left to right) or RTL (for right to left). <body dir="rtl"> You can add the dir attribute to any element and it will set or change the direction for the content within that element. <body dir="ltr"> Here is English Content. <div dir="rtl">الموضوع</div> </body> You can also set the direction via CSS. .rtl { direction: rtl; } It’s generally recommended that you don’t use CSS to set the direction of the text. Text direction is an important part of the content that should be retained even in environments where the CSS may not be available or fails to load. How things c… 2011 Jonathan Snook jonathansnook 2011-12-19T00:00:00+00:00 https://24ways.org/2011/going-both-ways/ ux
224 224 Go Forth and Make Awesomeness We’ve all dreamed of being a superhero: maybe that’s why we’ve ended up on the web—a place where we can do good deeds and celebrate them on a daily basis. Wear your dreams At age four, I wore my Wonder Woman Underoos around my house, my grandparents’ house, our neighbor’s house, and even around the yard. I wanted to be a superhero when I grew up. I was crushed to learn that there is no school for superheroes—no place to earn a degree in how to save the world from looming evil. Instead, I—like everyone else—was destined to go to ordinary school to focus on ABCs and 123s. Even still, I want to save the world. Intend your goodness Random acts of kindness make a difference. Books, films, and advertising campaigns tout random acts of kindness and the positive influence they can have on the world. But why do acts of kindness have to be so random? Why can’t we intend to be kind? A true superhero wakes each morning intending to perform selfless acts for the community. Why can’t we do the same thing? As a child, my mother taught me to plan to do at least three good deeds each day. And even now, years later, I put on my invisible cape looking for ways to do good. Here are some examples: slowing down to allow another driver in before me from the highway on-ramp bringing a co-worker their favorite kind of coffee or tea sharing my umbrella on a rainy day holding a door open for someone with full hands listening intently when someone shares a story complimenting someone on a job well done thanking someone for a job well done leaving a constructive, or even supportive comment on someone’s blog As you can see, these acts are simple. Doing good and being kind is partially about being aware—aware of the words we speak and the actions we take. Like superheroes, we create our own code of conduct to live by. Hopefully, we choose to put the community before ourselves (within reason) and to do our best not to damage it as we move through our lives. Take a bite out of the Apple With some thought, we can weave this ty… 2010 Leslie Jensen-Inman lesliejenseninman 2010-12-04T00:00:00+00:00 https://24ways.org/2010/go-forth-and-make-awesomeness/ business
95 95 Giving Content Priority with CSS3 Grid Layout Browser support for many of the modules that are part of CSS3 have enabled us to use CSS for many of the things we used to have to use images for. The rise of mobile browsers and the concept of responsive web design has given us a whole new way of looking at design for the web. However, when it comes to layout, we haven’t moved very far at all. We have talked for years about separating our content and source order from the presentation of that content, yet most of us have had to make decisions on source order in order to get a certain visual layout. Owing to some interesting specifications making their way through the W3C process at the moment, though, there is hope of change on the horizon. In this article I’m going to look at one CSS module, the CSS3 grid layout module, that enables us to define a grid and place elements on to it. This article comprises a practical demonstration of the basics of grid layout, and also a discussion of one way in which we can start thinking of content in a more adaptive way. Before we get started, it is important to note that, at the time of writing, these examples work only in Internet Explorer 10. CSS3 grid layout is a module created by Microsoft, and implemented using the -ms prefix in IE10. My examples will all use the -ms prefix, and not include other prefixes simply because this is such an early stage specification, and by the time there are implementations in other browsers there may be inconsistencies. The implementation I describe today may well change, but is also there for your feedback. If you don’t have access to IE10, then one way to view and test these examples is by signing up for an account with Browserstack – the free trial would give you time to have a look. I have also included screenshots of all relevant stages in creating the examples. What is CSS3 grid layout? CSS3 grid layout aims to let developers divide up a design into a grid and place content on to that grid. Rather than trying to fabricate a grid from floats, you can declare an actual grid on a c… 2012 Rachel Andrew rachelandrew 2012-12-18T00:00:00+00:00 https://24ways.org/2012/css3-grid-layout/ code
76 76 Giving CSS Animations and Transitions Their Place CSS animations and transitions may not sit squarely in the realm of the behaviour layer, but they’re stepping up into this area that used to be pure JavaScript territory. Heck, CSS might even perform better than its JavaScript equivalents in some cases. That’s pretty serious! With CSS’s new tricks blurring the lines between presentation and behaviour, it can start to feel bloated and messy in our CSS files. It’s an uncomfortable feeling. Here are a pair of methods I’ve found to be pretty helpful in keeping the potential bloat and wire-crossing under control when CSS has its hands in both presentation and behaviour. Same eggs, more baskets Structuring your CSS to have separate files for layout, typography, grids, and so on is a fairly common approach these days. But which one do you put your transitions and animations in? The initial answer, as always, is “it depends”. Small effects here and there will likely sit just fine with your other styles. When you move into more involved effects that require multiple animations and some logic support from JavaScript, it’s probably time to choose none of the above, and create a separate CSS file just for them. Putting all your animations in one file is a huge help for code organization. Even if you opt for a name less literal than animations.css, you’ll know exactly where to go for anything CSS animation related. That saves time and effort when it comes to editing and maintenance. Keeping track of which animations are still currently used is easier when they’re all grouped together as well. And as an added bonus, you won’t have to look at all those horribly unattractive and repetitive prefixed @-keyframe rules unless you actually need to. An animations.css file might look something like the snippet below. It defines each animation’s keyframes and defines a class for each variation of that animation you’ll be using. Depending on the situation, you may also want to include transitions here in a similar way. (I’ve found defining transitions as their own class, or mixin, … 2012 Val Head valhead 2012-12-08T00:00:00+00:00 https://24ways.org/2012/giving-css-animations-and-transitions-their-place/ code
15 15 Git for Grown-ups You are a clever and talented person. You create beautiful designs, or perhaps you have architected a system that even my cat could use. Your peers adore you. Your clients love you. But, until now, you haven’t *&^#^! been able to make Git work. It makes you angry inside that you have to ask your co-worker, again, for that *&^#^! command to upload your work. It’s not you. It’s Git. Promise. Yes, this is an article about the popular version control system, Git. But unlike just about every other article written about Git, I’m not going to give you the top five commands that you need to memorize; and I’m not going to tell you all your problems would be solved if only you were using this GUI wrapper or that particular workflow. You see, I’ve come to a grand realization: when we teach Git, we’re doing it wrong. Let me back up for a second and tell you a little bit about the field of adult education. (Bear with me, it gets good and will leave you feeling both empowered and righteous.) Andragogy, unlike pedagogy, is a learner-driven educational experience. There are six main tenets to adult education: Adults prefer to know why they are learning something. The foundation of the learning activities should include experience. Adults prefer to be able to plan and evaluate their own instruction. Adults are more interested in learning things which directly impact their daily activities. Adults prefer learning to be oriented not towards content, but towards problems. Adults relate more to their own motivators than to external ones. Nowhere in this list does it include “memorize the five most popular Git commands”. And yet this is how we teach version control: init, add, commit, branch, push. You’re an expert! Sound familiar? In the hierarchy of learning, memorizing commands is the lowest, or most basic, form of learning. At the peak of learning you are able to not just analyze and evaluate a problem space, but create your own understanding in relation to your existing body of knowledge. “Fine,” I can hear you say… 2013 Emma Jane Westby emmajanewestby 2013-12-04T00:00:00+00:00 https://24ways.org/2013/git-for-grownups/ code
52 52 Git Rebasing: An Elfin Workshop Workflow This year Santa’s helpers have been tasked with making a garland. It’s a pretty simple task: string beads onto yarn in a specific order. When the garland reaches a specific length, add it to the main workshop garland. Each elf has a specific sequence they’re supposed to chain, which is given to them via a work order. (This is starting to sound like one of those horrible calculus problems. I promise it isn’t. It’s worse; it’s about Git.) For the most part, the system works really well. The elves are able to quickly build up a shared chain because each elf specialises on their own bit of garland, and then links the garland together. Because of this they’re able to work independently, but towards the common goal of making a beautiful garland. At first the elves are really careful with each bead they put onto the garland. They check with one another before merging their work, and review each new link carefully. As time crunches on, the elves pour a little more cheer into the eggnog cooler, and the quality of work starts to degrade. Tensions rise as mistakes are made and unkind words are said. The elves quickly realise they’re going to need a system to change the beads out when mistakes are made in the chain. The first common mistake is not looking to see what the latest chain is that’s been added to the main garland. The garland is huge, and it sits on a roll in one of the corners of the workshop. It’s a big workshop, so it is incredibly impractical to walk all the way to the roll to check what the last link is on the chain. The elves, being magical, have set up a monitoring system that allows them to keep a local copy of the main garland at their workstation. It’s an imperfect system though, so the elves have to request a manual refresh to see the latest copy. They can request a new copy by running the command git pull --rebase=preserve (They found that if they ran git pull on its own, they ended up with weird loops of extra beads off the main garland, so they’ve opted to use this method.) This keeps the shared garl… 2015 Emma Jane Westby emmajanewestby 2015-12-07T00:00:00+00:00 https://24ways.org/2015/git-rebasing/ code
118 118 Ghosts On The Internet By rights the internet should be full of poltergeists, poor rootless things looking for their real homes. Many events on the internet are not properly associated with their correct timeframe. I don’t mean a server set to the wrong time, though that happens too. Much of the content published on the internet is separated from any proper reference to its publication time. What does publication even mean? Let me tell you a story… “It is 2019 and this is Kathy Clees reporting on the story of the moment, the shock purchase of Microsoft by Apple Inc. A Internet Explorer security scare story from 2008 was responsible, yes from 11 years ago, accidently promoted by an analyst, who neglected to check the date of their sources.” If you think this is fanciful nonsense, then cast your mind back to September 2008, this story in Wired or The Times (UK) about a huge United Airlines stock tumble. A Florida newspaper had a automated popular story section. A random reader looking at a story about United’s 2002 Bankruptcy proceedings caused this story to get picked up by Google’s later visit to the South Florida Sun Sentinel’s news home page. The story was undated, Google’s news engine apparently gave it a 2008 date, an analyst picked it up and pushed it to Bloomberg and within minutes the United stock was tumbling. Their stock price dropped from $12 to $3, then recovered to $11 over the day. An eight percent fall in share price over a mis-configured date Completing this out of order Christmas Carol, lets look at what is current practice and how dates are managed, we might even get to clank some chains. Publication date used to be inseparable from publication, the two things where stamped on the same piece of paper. How can we determine when things have been published, now? Determining publication dates Time as defined by http://www.w3.org/TR/NOTE-datetime extends ISO 8601, mandating the use of a year value. This is pretty well defined, we can even get very accurate timings down to milliseconds, Ruby and other languages can… 2008 Gavin Bell gavinbell 2008-12-20T00:00:00+00:00 https://24ways.org/2008/ghosts-on-the-internet/ ux
268 268 Getting the Most Out of Google Analytics Something a bit different for today’s 24 ways article. For starters, I’m not a designer or a developer. I’m an evil man who sells things to people on the internet. Second, this article will likely be a little more nebulous than you’re used to, since it covers quite a number of points in a relatively short space. This isn’t going to be the complete Google Analytics Conversion University IQ course compressed into a single article, obviously. What it will be, however, is a primer on setting up and using Google Analytics in real life, and a great deal of what I’ve learned using Google Analytics nearly every working day for the past six (crikey!) years. Also, to be clear, I’ll be referencing new Google Analytics here; old Google Analytics is for loooosers (and those who want reliable e-commerce conversion data per site search term, natch). You may have been running your Analytics account for several years now, dipping in and out, checking traffic levels, seeing what’s popular… and that’s about it. Google Analytics provides so much more than that, but the number of reports available can often intimidate users, and documentation and case studies on their use are minimal at best. Let’s start! Setting up your Analytics profile Before we plough on, I just want to run through a quick checklist that some basic settings have been enabled for your profile. If you haven’t clicked it, click the big cog on the top-right of Google Analytics and we’ll have a poke about. If you have an e-commerce site, e-commerce tracking has been enabled
 If your site has a search function, site search tracking has been enabled. Query string parameters that you do not want tracked as separate pages have been excluded (for example, any parameters needed for your platform to function, otherwise you’ll get multiple entries for the same page appearing in your reports) Filters have been enabled on your main profile to exclude your office IP address and any IPs of people who frequently access the site for work purposes. In decent numbers the… 2011 Matt Curry mattcurry 2011-12-18T00:00:00+00:00 https://24ways.org/2011/getting-the-most-out-of-google-analytics/ business
206 206 Getting Hardboiled with CSS Custom Properties Custom Properties are a fabulous new feature of CSS and have widespread support in contemporary browsers. But how do we handle browsers without support for CSS Custom Properties? Do we wait until those browsers are lying dead in a ditch before we use them? Do we tool up and prop up our CSS using a post-processor? Or do we get tough? Do we get hardboiled? Previously only pre-processing tools like LESS and Sass enabled developers to use variables in their stylesheets, but now Custom Properties have brought variables natively to CSS. How do you write a custom property? It’s hardly a mystery. Simply add two dashes to the start of a style rule. Like this: --color-text-default : black; If you’re more the underscore type, try this: --color_text_default : black; Hyphens or underscores are allowed in property names, but don’t be a chump and try to use spaces. Custom property names are also case-sensitive, so --color-text-default and --Color_Text_Default are two distinct properties. To use a custom property in your style rules, var() tells a browser to retrieve the value of a property. In the next example, the browser retrieves the black colour from the color-text-default variable and applies it to the body element: body { color : var(--color-text-default); } Like variables in LESS or Sass, CSS Custom Properties mean you don’t have to be a dumb mug and repeat colour, font, or size values multiple times in your stylesheets. Unlike a preprocessor variable though, CSS Custom Properties use the cascade, can be modified by media queries and other state changes, and can also be manipulated by Javascript. (Serg Hospodarets wrote a fabulous primer on CSS Custom Properties where he dives deeper into the code and possible applications.) Browser support Now it’s about this time that people normally mention browser support. So what about support for CSS Custom Properties? Current versions of Chrome, Edge, Firefox, Opera, and Safari are all good. Internet Explorer 11 and before? Opera Mini? Nasty. Sound familiar? Can I Use css… 2017 Andy Clarke andyclarke 2017-12-13T00:00:00+00:00 https://24ways.org/2017/getting-hardboiled-with-css-custom-properties/ code
307 307 Get the Balance Right: Responsive Display Text Last year in 24 ways I urged you to Get Expressive with Your Typography. I made the case for grabbing your readers’ attention by setting text at display sizes, that is to say big. You should consider very large text in the same way you might a hero image: a picture that creates an atmosphere and anchors your layout. When setting text to be read, it is best practice to choose body and subheading sizes from a pre-defined scale appropriate to the viewport dimensions. We set those sizes using rems, locking the text sizes together so they all scale according to the page default and your reader’s preferences. You can take the same approach with display text by choosing larger sizes from the same scale. However, display text, as defined by its purpose and relative size, is text to be seen first, and read second. In other words a picture of text. When it comes to pictures, you are likely to scale all scene-setting imagery - cover photos, hero images, and so on - relative to the viewport. Take the same approach with display text: lock the size and shape of the text to the screen or browser window. Introducing viewport units With CSS3 came a new set of units which are locked to the viewport. You can use these viewport units wherever you might otherwise use any other unit of length such as pixels, ems or percentage. There are four viewport units, and in each case a value of 1 is equal to 1% of either the viewport width or height as reported in reference1 pixels: vw - viewport width, vh - viewport height, vmin - viewport height or width, whichever is smaller vmax - viewport height or width, whichever is larger In one fell swoop you can set the size of a display heading to be proportional to the screen or browser width, rather than choosing from a scale in a series of media queries. The following makes the heading font size 13% of the viewport width: h1 { font-size: 13 vw; } So for a selection of widths, the rendered font size would be: Rendered font size (px) Viewport width 13 vw 320 42 768 100 1024 133 1280 166 1920 … 2016 Richard Rutter richardrutter 2016-12-09T00:00:00+00:00 https://24ways.org/2016/responsive-display-text/ code
163 163 Get To Grips with Slippy Maps Online mapping has definitely hit mainstream. Google Maps made ‘slippy maps’ popular and made it easy for any developer to quickly add a dynamic map to his or her website. You can now find maps for store locations, friends nearby, upcoming events, and embedded in blogs. In this tutorial we’ll show you how to easily add a map to your site using the Mapstraction mapping library. There are many map providers available to choose from, each with slightly different functionality, design, and terms of service. Mapstraction makes deciding which provider to use easy by allowing you to write your mapping code once, and then easily switch providers. Assemble the pieces Utilizing any of the mapping library typically consists of similar overall steps: Create an HTML div to hold the map Include the Javascript libraries Create the Javascript Map element Set the initial map center and zoom level Add markers, lines, overlays and more Create the Map Div The HTML div is where the map will actually show up on your page. It needs to have a unique id, because we’ll refer to that later to actually put the map here. This also lets you have multiple maps on a page, by creating individual divs and Javascript map elements. The size of the div also sets the height and width of the map. You set the size using CSS, either inline with the element, or via a CSS reference to the element id or class. For this example, we’ll use inline styling. <div id="map" style="width: 400px; height: 400px;"></div> Include Javascript libraries A mapping library is like any Javascript library. You need to include the library in your page before you use the methods of that library. For our tutorial, we’ll need to include at least two libraries: Mapstraction, and the mapping API(s) we want to display. Our first example we’ll use the ubiquitous Google Maps library. However, you can just as easily include Yahoo, MapQuest, or any of the other supported libraries. Another important aspect of the mapping libraries is that many of them require an API k… 2007 Andrew Turner andrewturner 2007-12-02T00:00:00+00:00 https://24ways.org/2007/get-to-grips-with-slippy-maps/ code
7 7 Get Started With GitHub Pages (Plus Bonus Jekyll) After several failed attempts at getting set up with GitHub Pages, I vowed that if I ever figured out how to do it, I’d write it up. Fortunately, I did eventually figure it out, so here is my write-up. Why I think GitHub Pages is cool Normally when you host stuff on GitHub, you’re just storing your files there. If you push site files, what you’re storing is the code, and when you view a file, you’re viewing the code rather than the output. What GitHub Pages lets you do is store those files, and if they’re HTML files, you can view them like any other website, so there’s no need to host them separately yourself. GitHub Pages accepts static HTML but can’t execute languages like PHP, or use a database in the way you’re probably used to, so you’ll need to output static HTML files. This is where templating tools such as Jekyll come in, which I’ll talk about later. The main benefit of GitHub Pages is ease of collaboration. Changes you make in the repository are automatically synced, so if your site’s hosted on GitHub, it’s as up-to-date as your GitHub repository. This really appeals to me because when I just want to quickly get something set up, I don’t want to mess around with hosting; and when people submit a pull request, I want that change to be visible as soon as I merge it without having to set up web hooks. Before you get started If you’ve used GitHub before, already have an account and know the basics like how to set up a repository and clone it to your computer, you’re good to go. If not, I recommend getting familiar with that first. The GitHub site has extensive documentation on getting started, and if you’re not a fan of using the command line, the official GitHub apps for Mac and Windows are great. I also found this tutorial about GitHub Pages by Thinkful really useful, and it contains details on how to turn an existing repository into a GitHub Pages site. Although this involves a bit of using the command line, it’s minimal, and I’ll guide you through the basics. Setting up GitHub Pages For this de… 2013 Anna Debenham annadebenham 2013-12-18T00:00:00+00:00 https://24ways.org/2013/get-started-with-github-pages/  
151 151 Get In Shape Pop quiz: what’s wrong with the following navigation? Maybe nothing. But then again, maybe there’s something bugging you about the way it comes together, something you can’t quite put your finger on. It seems well-designed, but it also seems a little… off. The design decisions that led to this eventual form were no doubt well-considered: Client: The top level needs to have a “current page” status indicator of some sort. Designer: How about a white tab? Client: Great! The second level needs to show up underneath the first level though… Designer: Okay, but that white tab I just added makes it hard to visually connect the bottom nav to the top. Client: Too late, we’ve seen the white tab and we love it. Try and make it work. Designer: Right. So I placed the second level in its own box. Client: Hmm. They seem too separated. I can’t tell that the yellow nav is the second level of the first. Designer: How about an indicator arrow? Client: Brilliant! The problem is that the end result feels awkward and forced. During the design process, little decisions were made that ultimately affect the overall shape of the navigation. What started out as a neatly contained rounded rectangle ended up as an ambiguous double shape that looks funny, though it’s often hard to pinpoint precisely why. The Shape of Things Well the why in this case is because seemingly unrelated elements in a design still end up visually interacting. Adding a new item to a page impacts everything surrounding it. In this navigation example, we’re looking at two individual objects that are close enough to each other that they form a relationship; if we reduce them to strictly their outlines, it’s a little easier to see that this particular combination registers oddly. The two shapes float with nothing really grounding them. If they were connected, perhaps it would be a different story. The white tab divides the top shape in half, leaving a gap in the middle of it. There’s very little balance in this pairing because the overall shape of the… 2007 Dave Shea daveshea 2007-12-16T00:00:00+00:00 https://24ways.org/2007/get-in-shape/ design
53 53 Get Expressive with Your Typography In 1955 Beatrice Warde, an American communicator on typography, published a series of essays entitled The Crystal Goblet in which she wrote, “People who love ideas must have a love of words. They will take a vivid interest in the clothes that words wear.” And with that proposition Warde introduced the idea that just as we judge someone based on the clothes they are wearing, so we make judgements about text based on the typefaces in which it is set. Beatrice Warde. ©1970 Monotype Imaging Inc. Choosing the same typeface as everyone else, especially if you’re trying to make a statement, is like turning up to a party in the same dress; to a meeting in the same suit, shirt and tie; or to a craft ale dispensary in the same plaid shirt and turned-up skinny jeans. But there’s more to your choice of typeface than simply making an impression. In 2012 Jon Tan wrote on 24 ways about a scientific study called “The Aesthetics of Reading” which concluded that “good quality typography is responsible for greater engagement during reading and thus induces a good mood.” Furthermore, at this year’s Ampersand conference Sarah Hyndman, an expert in multisensory typography, discussed how typefaces can communicate with our subconscious. Sarah showed that different fonts could have an effect on how food tasted. A rounded font placed near a bowl of jellybeans would make them taste sweeter, and a jagged angular font would make them taste more sour. The quality of your typography can therefore affect the mood of your reader, and your font choice directly affect the senses. This means you can manipulate the way people feel. You can change their emotional state through type alone. Now that’s a real superpower! The effects of your body text design choices are measurable but subtle. If you really want to have an impact you need to think big. Literally. Display text and headings are your attention grabbers. They are your chance to interrupt, introduce and seduce. Display text and headings set the scene and draw people in. Text set large creates… 2015 Richard Rutter richardrutter 2015-12-04T00:00:00+00:00 https://24ways.org/2015/get-expressive-with-your-typography/ design
109 109 Geotag Everywhere with Fire Eagle A note from the editors: Since this article was written Yahoo! has retired the Fire Eagle service. Location, they say, is everywhere. Everyone has one, all of the time. But on the web, it’s taken until this year to see the emergence of location in the applications we use and build. The possibilities are broad. Increasingly, mobile phones provide SDKs to approximate your location wherever you are, browser extensions such as Loki and Mozilla’s Geode provide browser-level APIs to establish your location from the proximity of wireless networks to your laptop. Yahoo’s Brickhouse group launched Fire Eagle, an ambitious location broker enabling people to take their location from any of these devices or sources, and provide it to a plethora of web services. It enables you to take the location information that only your iPhone knows about and use it anywhere on the web. That said, this is still a time of location as an emerging technology. Fire Eagle stores your location on the web (protected by application-specific access controls), but to try and give an idea of how useful and powerful your location can be — regardless of the services you use now — today’s 24ways is going to build a bookmarklet to call up your location on demand, in any web application. Location Support on the Web Over the past year, the number of applications implementing location features has increased dramatically. Plazes and Brightkite are both full featured social networks based around where you are, whilst Pownce rolled in Fire Eagle support to allow geotagging of all the content you post to their microblogging service. Dipity’s beautiful timeline shows for you moving from place to place and Six Apart’s activity stream for Movable Type started exposing your movements. The number of services that hook into Fire Eagle will increase as location awareness spreads through the developer community, but you can use your location on other sites indirectly too. Consider Flickr. … 2008 Ben Ward benward 2008-12-21T00:00:00+00:00 https://24ways.org/2008/geotag-everywhere-with-fire-eagle/ code

Next page

Advanced export

JSON shape: default, array, newline-delimited

CSV options: 

CREATE TABLE [articles] (
               [title] TEXT  ,
   [contents] TEXT  ,
   [year] TEXT  ,
   [author] TEXT  ,
   [author_slug] TEXT  ,
   [published] TEXT  ,
   [url] TEXT  ,
   [topic] TEXT  
        );