articles

336 rows sorted by year descending

✎ View and edit SQL

This data as json, CSV (advanced)

Suggested facets: year, topic

Link rowid title contents year ▲ author author_slug published url topic
241 241 Jank-Free Image Loads There are a few fundamental problems with embedding images in pages of hypertext; perhaps chief among them is this: text is very light and loads rather fast; images are much heavier and arrive much later. Consequently, millions (billions?) of times a day, a hapless Web surfer will start reading some text on a page, and then — Your browser doesn’t support HTML5 video. Here is a link to the video instead. — oops! — an image pops in above it, pushing said text down the page, and our poor reader loses their place. By default, partially-loaded pages have the user experience of a slippery fish, or spilled jar of jumping beans. For the rest of this article, I shall call that jarring, no-good jumpiness by its name: jank. And I’ll chart a path into a jank-free future – one in which it’s easy and natural to author <img> elements that load like this: Your browser doesn’t support HTML5 video. Here is a link to the video instead. Jank is a very old problem, and there is a very old solution to it: the width and height attributes on <img>. The idea is: if we stick an image’s dimensions right into the HTML, browsers can know those dimensions before the image loads, and reserve some space on the layout for it so that nothing gets bumped down the page when the image finally arrives. width Specifies the intended width of the image in pixels. When given together with the height, this allows user agents to reserve screen space for the image before the image data has arrived over the network. —The HTML 3.2 Specification, published on January 14 1997 Unfortunately for us, when width and height were first spec’d and implemented, layouts were largely fixed and images were usually only intended to render at their fixed, actual dimensions. When image sizing gets fluid, width and height get weird: See the Pen fluid width + fixed height = distortion by Eric Portis (@eeeps) on CodePen. width and height are too rigid for the responsive world. What we need, and have needed for a very long time, is a way to specify fixed aspect ra… 2018 Eric Portis ericportis 2018-12-21T00:00:00+00:00 https://24ways.org/2018/jank-free-image-loads/ code
242 242 Creating My First Chrome Extension Writing a Chrome Extension isn’t as scary at it seems! Not too long ago, I used a Chrome extension called 20 Cubed. I’m far-sighted, and being a software engineer makes it difficult to maintain distance vision. So I used 20 Cubed to remind myself to look away from my screen and rest my eyes. I loved its simple interface and design. I loved it so much, I often forgot to turn it off in the middle of presentations, where it would take over my entire screen. Oops. Unfortunately, the developer stopped updating the extension and removed it from Chrome’s extension library. I was so sad. None of the other eye rest extensions out there matched my design aesthetic, so I decided to create my own! Want to do the same? Fortunately, Google has some respectable documentation on how to create an extension. And remember, Chrome extensions are just HTML, CSS, and JavaScript. You can add libraries and frameworks, or you can just code the “old-fashioned” way. Sky’s the limit! Setup But first, some things you’ll need to know about before getting started: Callbacks Timeouts Chrome Dev Tools Developing with Chrome extension methods requires a lot of callbacks. If you’ve never experienced the joy of callback hell, creating a Chrome extension will introduce you to this concept. However, things can get confusing pretty quickly. I’d highly recommend brushing up on that subject before getting started. Hyperbole and a Half Timeouts and Intervals are another thing you might want to brush up on. While creating this extension, I didn’t consider the fact that I’d be juggling three timers. And I probably would’ve saved time organizing those and reading up on the Chrome extension Alarms documentation beforehand. But more on that in a bit. On the note of organization, abstraction is important! You might have any combination of the following: The Chrome extension options page The popup from the Chrome Menu The windows or tabs you create The background scripts And that can get unwieldy. You might also edit the existing tabs or windows in the brow… 2018 Jennifer Wong jenniferwong 2018-12-05T00:00:00+00:00 https://24ways.org/2018/my-first-chrome-extension/ code
243 243 Researching a Property in the CSS Specifications I frequently joke that I’m “reading the specs so you don’t have to”, as I unpack some detail of a CSS spec in a post on my blog, some documentation for MDN, or an article on Smashing Magazine. However waiting for someone like me to write an article about something is a pretty slow way to get the information you need. Sometimes people like me get things wrong, or specifications change after we write a tutorial. What if you could just look it up yourself? That’s what you get when you learn to read the CSS specifications, and in this article my aim is to give you the basic details you need to grab quick information about any CSS property detailed in the CSS specs. Where are the CSS Specifications? The easiest way to see all of the CSS specs is to take a look at the Current Work page in the CSS section of the W3C Website. Here you can see all of the specifications listed, the level they are at and their status. There is also a link to the specification from this page. I explained CSS Levels in my article Why there is no CSS 4. Who are the specifications for? CSS specifications are for everyone who uses CSS. You might be a browser engineer - referred to as an implementor - needing to know how to implement a feature, or a web developer - referred to as an author - wanting to know how to use the feature. The fact that both parties are looking at the same document hopefully means that what the browser displays is what the web developer expected. Which version of a spec should I look at? There are a couple of places you might want to look. Each published spec will have the latest published version, which will have TR in the URL and can be accessed without a date (which is always the newest version) or at a date, which will be the date of that publication. If I’m referring to a particular Working Draft in an article I’ll typically link to the dated version. That way if the information changes it is possible for someone to see where I got the information from at the time of writing. If you want the very latest additions an… 2018 Rachel Andrew rachelandrew 2018-12-14T00:00:00+00:00 https://24ways.org/2018/researching-a-property-in-the-css-specifications/ code
244 244 It’s Beginning to Look a Lot Like XSSmas I dread the office Secret Santa. I have a knack for choosing well-meaning but inappropriate presents, like a bottle of port for a teetotaller, a cheese-tasting experience for a vegan, or heaven forbid, Spurs socks for an Arsenal supporter. Ok, the last one was intentional. It’s the same with gifting code. Once, I made a pattern library for A List Apart which I open sourced, and a few weeks later, a glaring security vulnerability was found in it. My gift was so generous that it enabled unrestricted access to any file on any public-facing server that hosted it. With platforms like GitHub and npm, giving the gift of code is so easy it’s practically a no-brainer. This giant, open source yankee swap helps us do our jobs without starting from scratch with every project. But like any gift-giving, it’s also risky. Vulnerabilities and Open Source Open source code is not inherently more or less vulnerable than closed-source code. What makes it higher risk is that the same piece of code gets reused in lots of places, meaning a hacker can use the same exploit mechanism on the same vulnerable code in different apps. Graph showing the number of open source vulnerabilities published per year, from the State of Open Source Security 2017 In the first 24 ways article this year, Katie referenced a few different types of vulnerability: Cross-site Request Forgery (also known as CSRF) SQL Injection Cross-site Scripting (also known as XSS) There are many more types of vulnerability, and those that live under the same category share similarities. For example, my favourite – is it weird to have a favourite vulnerability? – is Cross Site Scripting (XSS), which allows for the injection of scripts into web pages. This is a really common vulnerability often unwittingly added by developers. OWASP (the Open Web Application Security Project) wrote a great article about how to prevent opening the door to XSS attacks – share it generously with your colleagues. Most vulnerabilities like this are not added intentionally – they’re doors left ajar… 2018 Anna Debenham annadebenham 2018-12-17T00:00:00+00:00 https://24ways.org/2018/its-beginning-to-look-a-lot-like-xssmas/ code
245 245 Web Content Accessibility Guidelines 2.1—for People Who Haven’t Read the Update Happy United Nations International Day of Persons with Disabilities 2018! The United Nations chose “Empowering persons with disabilities and ensuring inclusiveness and equality” as this year’s theme. We’ve seen great examples of that in 2018; for example, Paul Robert Lloyd has detailed how he improved the accessibility of this very website. On social media, US Congressmember-Elect Alexandria Ocasio-Cortez started using the Clipomatic app to add live captions to her Instagram live stories, conforming to success criterion 1.2.4, “Captions (Live)” of the Web Content Accessibility Guidelines (figure 1) …and British Vogue Contributing Editor Sinéad Burke has used the split-screen feature of Instagram live stories to invite an interpreter to provide live Sign Language interpretation, going above and beyond success criterion 1.2.6, “Sign Language (Prerecorded)” of the Web Content Accessibility Guidelines (figure 2). Figure 1: Screenshot of Alexandria Ocasio-Cortez’s Instagram story with live captionsFigure 2: Screenshot of Sinéad Burke’s Instagram story with Sign Language Interpretation That theme chimes with this year’s publication of the World Wide Web Consortium (W3C)’s Web Content Accessibility Guidelines (WCAG) 2.1. In last year’s “Web Content Accessibility Guidelines—for People Who Haven’t Read Them”, I mentioned the scale of the project to produce this update during 2018: “the editors have to update the guidelines to cover all the new ways that people interact with new technologies, while keeping the guidelines backwards-compatible”. The WCAG working group have added 17 success criteria to the 61 that they released way back in 2008—for context, that was 1½ years before Apple released their first iPad! These new criteria make it easier than ever for us web geeks to produce work that is more accessible to people using mobile devices and touchscreens, people with low vision, and people with cognitive and learning disabilities. Once again, let’s rip off all the legalese and ambiguous terminology like wrapping pap… 2018 Alan Dalton alandalton 2018-12-03T00:00:00+00:00 https://24ways.org/2018/wcag-for-people-who-havent-read-the-update/ ux
246 246 Designing Your Site Like It’s 1998 It’s 20 years to the day since my wife and I started Stuff & Nonsense, our little studio and my outlet for creative ideas on the web. To celebrate this anniversary—and my fourteenth contribution to 24 ways— I’d like to explain how I would’ve developed a design for Planes, Trains and Automobiles, one of my favourite Christmas films. My design for Planes, Trains and Automobiles is fixed at 800px wide. Developing a <frameset> framework I’ll start by using frames to set up the framework for this new website. Frames are individual pages—one for navigation, the other for my content—pulled together to form a frameset. Space is limited on lower-resolution screens, so by using frames I can ensure my navigation always remains visible. I can include any number of frames inside a <frameset> element. I add two rows to my <frameset>; the first is for my navigation and is 50px tall, the second is for my content and will resize to fill any available space. As I don’t want frame borders or any space between my frames, I set frameborder and framespacing attributes to 0: <frameset frameborder="0" framespacing="0" rows="50,*"> […] </frameset> Next I add the source of my two frame documents. I don’t want people to be able to resize or scroll my navigation, so I add the noresize attribute to that frame: <frameset frameborder="0" framespacing="0" rows="50,*"> <frame noresize scrolling="no" src="nav.html"> <frame src="content.html"> </frameset> I do want links from my navigation to open in the content frame, so I give each <frame> a name so I can specify where I want links to open: <frameset frameborder="0" framespacing="0" rows="50,*"> <frame name="navigation" noresize scrolling="no" src="nav.html"> <frame name="content" src="content.html"> </frameset> The framework for this website is simple as it contains only two horizontal rows. Should I need a more complex layout, I can nest as many framesets—and as many individual documents—as I need: <frameset rows="50,*"> <frame name="navigation"> <frameset cols="25%,*"> <frame name="sideba… 2018 Andy Clarke andyclarke 2018-12-23T00:00:00+00:00 https://24ways.org/2018/designing-your-site-like-its-1998/ code
247 247 Managing Flow and Rhythm with CSS Custom Properties An important part of designing user interfaces is creating consistent vertical rhythm between elements. Creating consistent, predictable space doesn’t just make your web pages and views look better, but it can also improve the scan-ability. Browsers ship with default CSS and these styles often create consistent rhythm for flow elements out of the box. The problem is though that we often reset these styles with a reset. Elements such as <div> and <section> also have no default margin or padding associated with them. I’ve tried all sorts of weird and wonderful techniques to find a balance between using inherited CSS while also levelling the playing field for component driven front-ends with very little success. This experimentation is how I landed on the flow utility, though and I’m going to show you how it works. Let’s dive in! The Flow utility With the ever-growing number of folks working with component libraries and design systems, we could benefit from a utility that creates space for us, only when it’s appropriate to do so. The problem with my previous attempts at fixing this is that the spacing values were very rigid. That’s fine for 90% of contexts, but sometimes, it’s handy to be able to tweak the values based on the exact context of your component. This is where CSS Custom Properties come in handy. The code .flow { --flow-space: 1em; } .flow > * + * { margin-top: var(--flow-space); } What this code does is enable you to add a class of flow to an element which will then add margin-top to sibling elements within that element. We use the lobotomised owl selector to select these siblings. This approach enables an almost anonymous and automatic system which is ideal for component library based front-ends where components probably don’t have any idea what surrounds them. The other important part of this utility is the usage of the --flow-space custom property. We define it in the .flow component and each element within it will be spaced by --flow-space, by default. The beauty about setting this as a … 2018 Andy Bell andybell 2018-12-07T00:00:00+00:00 https://24ways.org/2018/managing-flow-and-rhythm-with-css-custom-properties/ code
248 248 How to Use Audio on the Web I know what you’re thinking. I never never want to hear sound anywhere near a browser, ever ever, wow! 🙉 You’re having flashbacks, flashbacks to the days of yore, when we had a <bgsound> element and yup did everyone think that was the most rad thing since <blink>. I mean put those two together with a <marquee>, only use CSS colour names, make sure your borders were all set to ridge and you’ve got yourself the neatest website since 1998. The sound played when the website loaded and you could play a MIDI file as well! Everyone could hear that wicked digital track you chose. Oh, surfing was gnarly back then. Yes it is 2018, the end of in fact, soon to be 2019. We are certainly living in the future. Hoverboards self driving cars, holodecks VR headsets, rocket boots drone racing, sound on websites get real, Ruth. We can’t help but be jaded, even though the <bgsound> element is depreciated, and the autoplay policy appeared this year. Although still in it’s infancy, the policy “controls when video and audio is allowed to autoplay”, which should reduce the somewhat obtrusive playing of sound when a website or app loads in the future. But then of course comes the question, having lived in a muted present for so long, where and why would you use audio? ✨ Showcase Time ✨ There are some incredible uses of audio on websites today. This is my personal favourite futurelibrary.no, a site from Norway chronicling books that have been published from a forest of trees planted precisely for the books themselves. The sound effects are lovely, adding to the overall experience. futurelibrary.no Another site that executes this well is pottermore.com. The Hogwarts WebGL simulation uses both sound effects and ambient background music and gives a great experience. The button hovers are particularly good. pottermore.com Eighty-six and a half years is a beautiful narrative site, documenting the musings of an eighty-six and a half year old man. The background music playing on this site is not offensive, it adds to the experience. Eighty-six an… 2018 Ruth John ruthjohn 2018-12-22T00:00:00+00:00 https://24ways.org/2018/how-to-use-audio-on-the-web/ design
249 249 Fast Autocomplete Search for Your Website Every website deserves a great search engine - but building a search engine can be a lot of work, and hosting it can quickly get expensive. I’m going to build a search engine for 24 ways that’s fast enough to support autocomplete (a.k.a. typeahead) search queries and can be hosted for free. I’ll be using wget, Python, SQLite, Jupyter, sqlite-utils and my open source Datasette tool to build the API backend, and a few dozen lines of modern vanilla JavaScript to build the interface. Try it out here, then read on to see how I built it. First step: crawling the data The first step in building a search engine is to grab a copy of the data that you plan to make searchable. There are plenty of potential ways to do this: you might be able to pull it directly from a database, or extract it using an API. If you don’t have access to the raw data, you can imitate Google and write a crawler to extract the data that you need. I’m going to do exactly that against 24 ways: I’ll build a simple crawler using wget, a command-line tool that features a powerful “recursive” mode that’s ideal for scraping websites. We’ll start at the https://24ways.org/archives/ page, which links to an archived index for every year that 24 ways has been running. Then we’ll tell wget to recursively crawl the website, using the --recursive flag. We don’t want to fetch every single page on the site - we’re only interested in the actual articles. Luckily, 24 ways has nicely designed URLs, so we can tell wget that we only care about pages that start with one of the years it has been running, using the -I argument like this: -I /2005,/2006,/2007,/2008,/2009,/2010,/2011,/2012,/2013,/2014,/2015,/2016,/2017 We want to be polite, so let’s wait for 2 seconds between each request rather than hammering the site as fast as we can: --wait 2 The first time I ran this, I accidentally downloaded the comments pages as well. We don’t want those, so let’s exclude them from the crawl using -X "/*/*/comments". Finally, it’s useful to be able to run the command multiple times… 2018 Simon Willison simonwillison 2018-12-19T00:00:00+00:00 https://24ways.org/2018/fast-autocomplete-search-for-your-website/ code
250 250 Build up Your Leadership Toolbox Leadership. It can mean different things to different people and vary widely between companies. Leadership is more than just a job title. You won’t wake up one day and magically be imbued with all you need to do a good job at leading. If we don’t have a shared understanding of what a Good Leader looks like, how can we work on ourselves towards becoming one? How do you know if you even could be a leader? Can you be a leader without the title? What even is it? I got very frustrated way back in my days as a senior developer when I was given “advice” about my leadership style; at the time I didn’t have the words to describe the styles and ways in which I was leading to be able to push back. I heard these phrases a lot: you need to step up you need to take charge you need to grab the bull by its horns you need to have thicker skin you need to just be more confident in your leading you need to just make it happen I appreciate some people’s intent was to help me, but honestly it did my head in. WAT?! What did any of this even mean. How exactly do you “step up” and how are you evaluating what step I’m on? I am confident, what does being even more confident help achieve with leading? Does that not lead you down the path of becoming an arrogant door knob? >___< While there is no One True Way to Lead, there is an overwhelming pattern of people in positions of leadership within tech industry being held by men. It felt a lot like what people were fundamentally telling me to do was to be more like an extroverted man. I was being asked to demonstrate more masculine associated qualities (#notallmen). I’ll leave the gendered nature of leadership qualities as an exercise in googling for the reader. I’ve never had a good manager and at the time had no one else to ask for help, so I turned to my trusted best friends. Books. I <3 books I refused to buy into that style of leadership as being the only accepted way to be. There had to be room for different kinds of people to be leaders and have different leadership styles. There are t… 2018 Mazz Mosley mazzmosley 2018-12-10T00:00:00+00:00 https://24ways.org/2018/build-up-your-leadership-toolbox/ business
251 251 The System, the Search, and the Food Bank Imagine a warehouse, half the length of a football field, with a looped conveyer belt down the center. On the belt are plastic bins filled with assortments of shelf-stable food—one may have two bags of potato chips, seventeen pudding cups, and a box of tissues; the next, a dozen cans of beets. The conveyer belt is ringed with large, empty cardboard boxes, each labeled with categories like “Bottled Water” or “Cereal” or “Candy.” Such was the scene at my local food bank a few Saturdays ago, when some friends and I volunteered for a shift sorting donated food items. Our job was to fill the labeled cardboard boxes with the correct items nabbed from the swiftly moving, randomly stocked plastic bins. I could scarcely believe my good fortune of assignments. You want me to sort things? Into categories? For several hours? And you say there’s an element of time pressure? Listen, is there some sort of permanent position I could be conscripted into. Look, I can’t quite explain it: I just know that I love sorting, organizing, and classifying things—groceries at a food bank, but also my bookshelves, my kitchen cabinets, my craft supplies, my dishwasher arrangement, yes I am a delight to live with, why do you ask? The opportunity to create meaning from nothing is at the core of my excitement, which is why I’ve tried to build a career out of organizing digital content, and why I brought a frankly frightening level of enthusiasm to the food bank. “I can’t believe they’re letting me do this,” I whispered in awe to my conveyer belt neighbor as I snapped up a bag of popcorn for the Snacks box with the kind of ferocity usually associated with birds of prey. The jumble of donated items coming into the center need to be sorted in order for the food bank to be able to quantify, package, and distribute the food to those who need it (I sense a metaphor coming on). It’s not just a nice-to-have that we spent our morning separating cookies from carrots—it’s a crucial step in the process. Organization makes the difference between chaos and … 2018 Lisa Maria Martin lisamariamartin 2018-12-16T00:00:00+00:00 https://24ways.org/2018/the-system-the-search-and-the-food-bank/ content
252 252 Turn Jekyll up to Eleventy Sometimes it pays not to over complicate things. While many of the sites we use on a daily basis require relational databases to manage their content and dynamic pages to respond to user input, for smaller, simpler sites, serving pre-rendered static HTML is usually a much cheaper — and more secure — option. The JAMstack (JavaScript, reusable APIs, and prebuilt Markup) is a popular marketing term for this way of building websites, but in some ways it’s a return to how things were in the early days of the web, before developers started tinkering with CGI scripts or Personal HomePage. Indeed, my website has always served pre-rendered HTML; first with the aid of Movable Type and more recently using Jekyll, which Anna wrote about in 2013. By combining three approachable languages — Markdown for content, YAML for data and Liquid for templating — the ergonomics of Jekyll found broad appeal, influencing the design of the many static site generators that followed. But Jekyll is not without its faults. Aside from notoriously slow build times, it’s also built using Ruby. While this is an elegant programming language, it is yet another ecosystem to understand and manage, and often alongside one we already use: JavaScript. For all my time using Jekyll, I would think to myself “this, but in Node”. Thankfully, one of Santa’s elves (Zach Leatherman) granted my Atwoodian wish and placed such a static site generator under my tree. Introducing Eleventy Eleventy is a more flexible alternative Jekyll. Besides being written in Node, it’s less strict about how to organise files and, in addition to Liquid, supports other templating languages like EJS, Pug, Handlebars and Nunjucks. Best of all, its build times are significantly faster (with future optimisations promising further gains). As content is saved using the familiar combination of YAML front matter and Markdown, transitioning from Jekyll to Eleventy may seem like a reasonable idea. Yet as I’ve discovered, there are a few gotchas. If you’ve been considering making the switch, he… 2018 Paul Lloyd paulrobertlloyd 2018-12-11T00:00:00+00:00 https://24ways.org/2018/turn-jekyll-up-to-eleventy/ content
253 253 Clip Paths Know No Bounds CSS Shapes are getting a lot of attention as browser support has increased for properties like shape-outside and clip-path. There are a few ways that we can use CSS Shapes, in particular with the clip-path property, that are not necessarily evident at first glance. The basics of a clip path Before we dig into specific techniques to expand on clip paths, we should first take a look at a basic shape and clip-path. Clip paths can apply a CSS Shape such as a circle(), ellipse(), inset(), or the flexible polygon() to any element. Everywhere in the element that is not within the bounds of our shape will be visually removed. Using the polygon shape function, for example, we can create triangles, stars, or other straight-edged shapes as on Bennett Feely’s Clippy. While fixed units like pixels can be used when defining vertices/points (where the sides meet), percentages will give more flexibility to adapt to the element’s dimensions. See the Pen Clip Path Box by Dan Wilson (@danwilson) on CodePen. So for an octagon, we can set eight x, y pairs of percentages to define those points. In this case we start 30% into the width of the box for the first x and at the top of the box for the y and go clockwise. The visible area becomes the interior of the shape made by connecting these points with straight lines. clip-path: polygon( 30% 0%, 70% 0%, 100% 30%, 100% 70%, 70% 100%, 30% 100%, 0% 70%, 0% 30% ); A shape with less vertices than the eye can see It’s reasonable to look at the polygon() function and assume that we need to have one pair of x, y coordinates for every point in our shape. However, we gain some flexibility by thinking outside the box — or more specifically when we think outside the range of 0% - 100%. Our element’s box model will be the ultimate boundary for a clip-path, but we can still define points that exist beyond that natural box for an element. See the Pen CSS Shapes Know No Bounds by Dan Wilson (@danwilson) on CodePen. By going beyond the 0% - 100% range we can turn a polygon with three p… 2018 Dan Wilson danwilson 2018-12-20T00:00:00+00:00 https://24ways.org/2018/clip-paths-know-no-bounds/ code
254 254 What I Learned in Six Years at GDS When I joined the Government Digital Service in April 2012, GOV.UK was just going into public beta. GDS was a completely new organisation, part of the Cabinet Office, with a mission to stop wasting government money on over-complicated and underperforming big IT projects and instead deliver simple, useful services for the public. Lots of people who were experts in their fields were drawn in by this inspiring mission, and I learned loads from working with some true leaders. Here are three of the main things I learned. 1. What is the user need? 
The main discipline I learned from my time at GDS was to always ask ‘what is the user need?’ It’s very easy to build something that seems like a good idea, but until you’ve identified what problem you are solving for the user, you can’t be sure that you are building something that is going to help solve an actual problem. A really good example of this is GOV.UK Notify. This service was originally conceived of as a status tracker; a “where’s my stuff” for government services. For example, if you apply for a passport online, it can take up to six weeks to arrive. After a few weeks, you might feel anxious and phone the Home Office to ask what’s happening. The idea of the status tracker was to allow you to get this information online, saving your time and saving government money on call centres. The project started, as all GDS projects do, with a discovery. The main purpose of a discovery is to identify the users’ needs. At the end of this discovery, the team realised that a status tracker wasn’t the way to address the problem. As they wrote in this blog post: Status tracking tools are often just ‘channel shift’ for anxiety. They solve the symptom and not the problem. They do make it more convenient for people to reduce their anxiety, but they still require them to get anxious enough to request an update in the first place. What would actually address the user need would be to give you the information before you get anxious about where your passport is. For example, when your… 2018 Anna Shipman annashipman 2018-12-08T00:00:00+00:00 https://24ways.org/2018/what-i-learned-in-six-years-at-gds/ business
255 255 Inclusive Considerations When Restyling Form Controls I would like to begin by saying 2018 was the year that we, as developers, visual designers, browser implementers, and inclusive design and experience specialists rallied together and achieved a long-sought goal: We now have the ability to fully style form controls, across all modern browsers, while retaining their ease of declaration, native functionality and accessibility. I would like to begin by saying all these things. However, they’re not true. I think we spent the year debating about what file extension CSS should be written in, or something. Or was that last year? Maybe I’m thinking of next year. Returning to reality, styling form controls is more tricky and time consuming these days rather than flat out “hard”. In fact, depending on the length of the styling-leash a particular browser provides, there are controls you can style quite a bit. As for browsers with shorter leashes, there are other options to force their controls closer to the visual design you’re tasked to match. However, when striving for custom styled controls, one must be careful not to forget about the inherent functionality and accessibility that many provide. People expect and deserve the products and services they use and pay for to work for them. If these services are visually pleasing, but only function for those who fit the handful of personas they’ve been designed for, then we’ve potentially deprived many people the experiences they deserve. Quick level setting Getting down to brass tacks, when creating custom styled form controls that should retain their expected semantics and functionality, we have to consider the following: Many form elements can be styled directly through standard and browser specific selectors, as well as through some clever styling of markup patterns. We should leverage these native options before reinventing any wheels. It is important to preserve the underlying semantics of interactive controls. We must not unintentionally exclude people who use assistive technologies (ATs) that rely on these semantics. Ma… 2018 Scott O'Hara scottohara 2018-12-13T00:00:00+00:00 https://24ways.org/2018/inclusive-considerations-when-restyling-form-controls/ code
256 256 Develop Your Naturalist Superpowers with Observable Notebooks and iNaturalist We’re going to level up your knowledge of what animals you might see in an area at a particular time of year - a skill every naturalist* strives for - using technology! Using iNaturalist and Observable Notebooks we’re going to prototype seasonality graphs for particular species in an area, and automatically create a guide to what animals you might see in each month. *(a Naturalist is someone who likes learning about nature, not someone who’s a fan of being naked, that’s a ‘Naturist’… different thing!) Looking for critters in rocky intertidal habitats One of my favourite things to do is going rockpooling, or as we call it over here in California, ‘tidepooling’. Amounting to the same thing, it’s going to a beach that has rocks where the tide covers then uncovers little pools of water at different times of the day. All sorts of fun creatures and life can be found in this ‘rocky intertidal habitat’ A particularly exciting creature that lives here is the Nudibranch, a type of super colourful ‘sea slug’. There are over 3000 species of Nudibranch worldwide. (The word “nudibranch” comes from the Latin nudus, naked, and the Greek βρανχια / brankhia, gills.) ​ They are however quite tricky to find! Even though they are often brightly coloured and interestingly shaped, some of them are very small, and in our part of the world in the Bay Area in California their appearance in our rockpools is seasonal. We see them more often in Summer months, despite the not-as-low tides as in our Winter and Spring seasons. My favourite place to go tidepooling here is Pillar Point in Half Moon bay (at other times of the year more famously known for the surf competition ‘Mavericks’). The rockpools there are rich in species diversity, of varied types and water-coverage habitat zones as well as being relatively accessible. ​ I was rockpooling at Pillar Point recently with my parents and we talked to a lady who remarked that she hadn’t seen any Nudibranchs on her visit this time. I realised that having an idea of what species to find where, a… 2018 Natalie Downe nataliedowne 2018-12-18T00:00:00+00:00 https://24ways.org/2018/observable-notebooks-and-inaturalist/ code
257 257 The (Switch)-Case for State Machines in User Interfaces You’re tasked with creating a login form. Email, password, submit button, done. “This will be easy,” you think to yourself. Login form by Selecto You’ve made similar forms many times in the past; it’s essentially muscle memory at this point. You’re working closely with a designer, who gives you a beautiful, detailed mockup of a login form. Sure, you’ll have to translate the pixels to meaningful, responsive CSS values, but that’s the least of your problems. As you’re writing up the HTML structure and CSS layout and styles for this form, you realize that you don’t know what the successful “logged in” page looks like. You remind the designer, who readily gives it to you. But then you start thinking more and more about how the login form is supposed to work. What if login fails? Where do those errors show up? Should we show errors differently if the user forgot to enter their email, or password, or both? Or should the submit button be disabled? Should we validate the email field? When should we show validation errors – as they’re typing their email, or when they move to the password field, or when they click submit? (Note: many, many login forms are guilty of this.) When should the errors disappear? What do we show during the login process? Some loading spinner? What if loading takes too long, or a server error occurs? Many more questions come up, and you (and your designer) are understandably frustrated. The lack of upfront specification opens the door to scope creep, which readily finds itself at home in all the unexplored edge cases. Modeling Behavior Describing all the possible user flows and business logic of an application can become tricky. Ironically, user stories might not tell the whole story – they often leave out potential edge-cases or small yet important bits of information. However, one important (and very old) mathematical model of computation can be used for describing the behavior and all possible states of a user interface: the finite state machine. The general idea, as it applies to user interfa… 2018 David Khourshid davidkhourshid 2018-12-12T00:00:00+00:00 https://24ways.org/2018/state-machines-in-user-interfaces/ code
258 258 Mistletoe Offline It’s that time of year, when we gather together as families to celebrate the life of the greatest person in history. This man walked the Earth long before us, but he left behind words of wisdom. Those words can guide us every single day, but they are at the forefront of our minds during this special season. I am, of course, talking about Murphy, and the golden rule he gave unto us: Anything that can go wrong will go wrong. So true! I mean, that’s why we make sure we’ve got nice 404 pages. It’s not that we want people to ever get served a File Not Found message, but we acknowledge that, despite our best efforts, it’s bound to happen sometime. Murphy’s Law, innit? But there are some Murphyesque situations where even your lovingly crafted 404 page won’t help. What if your web server is down? What if someone is trying to reach your site but they lose their internet connection? These are all things than can—and will—go wrong. I guess there’s nothing we can do about those particular situations, right? Wrong! A service worker is a Murphy-battling technology that you can inject into a visitor’s device from your website. Once it’s installed, it can intercept any requests made to your domain. If anything goes wrong with a request—as is inevitable—you can provide instructions for the browser. That’s your opportunity to turn those server outage frowns upside down. Take those network connection lemons and make network connection lemonade. If you’ve got a custom 404 page, why not make a custom offline page too? Get your server in order Step one is to make …actually, wait. There’s a step before that. Step zero. Get your site running on HTTPS, if it isn’t already. You won’t be able to use a service worker unless everything’s being served over HTTPS, which makes sense when you consider the awesome power that a service worker wields. If you’re developing locally, service workers will work fine for localhost, even without HTTPS. But for a live site, HTTPS is a must. Make an offline page Alright, assuming your site is being served… 2018 Jeremy Keith jeremykeith 2018-12-04T00:00:00+00:00 https://24ways.org/2018/mistletoe-offline/ code
259 259 Designing Your Future I’ve had the pleasure of working for a variety of clients – both large and small – over the last 25 years. In addition to my work as a design consultant, I’ve worked as an educator, leading the Interaction Design team at Belfast School of Art, for the last 15 years. In July, 2018 – frustrated with formal education, not least the ever-present hand of ‘austerity’ that has ravaged universities in the UK for almost a decade – I formally reduced my teaching commitment, moving from a full-time role to a half-time role. Making the move from a (healthy!) monthly salary towards a position as a freelance consultant is not without its challenges: one month your salary’s arriving in your bank account (and promptly disappearing to pay all of your bills); the next month, that salary’s been drastically reduced. That can be a shock to the system. In this article, I’ll explore the challenges encountered when taking a life-changing leap of faith. To help you confront ‘the fear’ – the nervousness, the sleepless nights and the ever-present worry about paying the bills – I’ll provide a set of tools that will enable you to take a leap of faith and pursue what deep down drives you. In short: I’ll bare my soul and share everything I’m currently working on to – once and for all – make a final bid for freedom. This isn’t easy. I’m sharing my innermost hopes and aspirations, and I might open myself up to ridicule, but I believe that by doing so, I might help others, by providing them with tools to help them make their own leap of faith. The power of visualisation As designers we have skills that we use day in, day out to imagine future possibilities, which we then give form. In our day-to-day work, we use those abilities to design products and services, but I also believe we can use those skills to design something every bit as important: ourselves. In this article I’ll explore three tools that you can use to design your future: Product DNA Artefacts From the Future Tomorrow Clients Each of these tools is designed to help you visualise y… 2018 Christopher Murphy christophermurphy 2018-12-15T00:00:00+00:00 https://24ways.org/2018/designing-your-future/ process
260 260 The Art of Mathematics: A Mandala Maker Tutorial In front-end development, there’s often a great deal of focus on tools that aim to make our work more efficient. But what if you’re new to web development? When you’re just starting out, the amount of new material can be overwhelming, particularly if you don’t have a solid background in Computer Science. But the truth is, once you’ve learned a little bit of JavaScript, you can already make some pretty impressive things. A couple of years back, when I was learning to code, I started working on a side project. I wanted to make something colorful and fun to share with my friends. This is what my app looks like these days: Mandala Maker user interface The coolest part about it is the fact that it’s a tool: anyone can use it to create something original and brand new. In this tutorial, we’ll build a smaller version of this app – a symmetrical drawing tool in ES5, JavaScript and HTML5. The tutorial app will have eight reflections, a color picker and a Clear button. Once we’re done, you’re on your own and can tweak it as you please. Be creative! Preparations: a blank canvas The first thing you’ll need for this project is a designated drawing space. We’ll use the HTML5 canvas element and give it a width and a height of 600px (you can set the dimensions to anything else if you like). Files Create 3 files: index.html, styles.css, main.js. Don’t forget to include your JS and CSS files in your HTML. <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <link rel="stylesheet" type="text/css" href="style.css"> <script src="main.js"></script> </head> <body onload="init()"> <canvas width="600" height="600"> <p>Your browser doesn't support canvas.</p> </canvas> </body> </html> I’ll ask you to update your HTML file at a later point, but the CSS file we’ll start with will stay the same throughout the project. This is the full CSS we are going to use: body { background-color: #ccc; text-align: center; } canvas { touch-action: none; background-color: #fff; } button { font-size: 110%;… 2018 Hagar Shilo hagarshilo 2018-12-02T00:00:00+00:00 https://24ways.org/2018/the-art-of-mathematics/ code
261 261 Surviving—and Thriving—as a Remote Worker Remote work is hot right now. Many people even say that remote work is the future. Why should a company limit itself to hiring from a specific geographic location when there’s an entire world of talent out there? I’ve been working remotely, full-time, for five and a half years. I’ve reached the point where I can’t even fathom working in an office. The idea of having to wake up at a specific time and commute into an office, work for eight hours, and then commute home, feels weirdly anachronistic. I’ve grown attached to my current level of freedom and flexibility. However, it took me a lot of trial and error to reach success as a remote worker — and sometimes even now, I slip up. Working remotely requires a great amount of discipline, independence, and communication. It can feel isolating, especially if you lean towards the more extroverted side of the social spectrum. Remote working isn’t for everyone, but most people, with enough effort, can make it work — or even thrive. Here’s what I’ve learned in over five years of working remotely. Experiment with your environment As a remote worker, you have almost unprecedented control of your environment. You can often control the specific desk and chair you use, how you accessorize your home office space — whether that’s a dedicated office, a corner of your bedroom, or your kitchen table. (Ideally, not your couch… but I’ve been there.) Hate fluorescent lights? Change your lightbulbs. Cover your work area in potted plants. Put up blackout curtains and work in the dark like a vampire. Whatever makes you feel most comfortable and productive, and doesn’t completely destroy your eyesight. Working remotely doesn’t always mean working from home. If you don’t have a specific reason you need to work from home (like specialized equipment), try working from other environments (which is especially helpful it you have roommates, or children). Cafes are the quintessential remote worker hotspot, but don’t just limit yourself to your favorite local haunt. More cities worldwide are embrac… 2018 Mel Choyce melchoyce 2018-12-09T00:00:00+00:00 https://24ways.org/2018/thriving-as-a-remote-worker/ process
262 262 Be the Villain Inclusive Design is the practice of making products and services accessible to, and usable by as many people as reasonably possible without the need for specialized accommodations. The practice was popularized by author and User Experience Design Director Kat Holmes. If getting you to discover her work is the only thing this article succeeds in doing then I’ll consider it a success. As a framework for creating resilient solutions to problems, Inclusive Design is incredible. However, the aimless idealistic aspirations many of its newer practitioners default to can oftentimes run into trouble. Without outlining concrete, actionable outcomes that are then vetted by the people you intend to serve, there is the potential to do more harm than good. When designing, you take a user flow and make sure it can’t be broken. Ensuring that if something is removed, it can be restored. Or that something editable can also be updated at a later date—you know, that kind of thing. What we want to do is avoid surprises. Much like a water slide with a section of pipe missing, a broken flow forcibly ejects a user, to great surprise and frustration. Interactions within a user flow also have to be small enough to be self-contained, so as to avoid creating a none pizza with left beef scenario. Lately, I’ve been thinking about how to expand on this practice. Watertight user flows make for a great immediate experience, but it’s all too easy to miss the forest for the trees when you’re a product designer focused on cranking out features. What I’m concerned about is while to trying to envision how a user flow could be broken, you also think about how it could be subverted. In addition to preventing the removal of a section of water slide, you also keep someone from mugging the user when they shoot out the end. If you pay attention, you’ll start to notice this subversion with increasing frequency: Domestic abusers using internet-controlled devices to spy on and control their partner. Zealots tanking a business’ rating on Google because its … 2018 Eric Bailey ericbailey 2018-12-06T00:00:00+00:00 https://24ways.org/2018/be-the-villain/ ux
263 263 Securing Your Site like It’s 1999 Running a website in the early years of the web was a scary business. The web was an evolving medium, and people were finding new uses for it almost every day. From book stores to online auctions, the web was an expanding universe of new possibilities. As the web evolved, so too did the knowledge of its inherent security vulnerabilities. Clever tricks that were played on one site could be copied on literally hundreds of other sites. It was a normal sight to log in to a website to find nothing working because someone had breached its defences and deleted its database. Lessons in web security in those days were hard-earned. What follows are examples of critical mistakes that brought down several early websites, and how you can help protect yourself and your team from the same fate. Bad input validation: Trusting anything the user sends you Our story begins in the most unlikely place: Animal Crossing. Animal Crossing was a 2001 video game set in a quaint town, filled with happy-go-lucky inhabitants that co-exist peacefully. Like most video games, Animal Crossing was the subject of many fan communities on the early web. One such unofficial web forum was dedicated to players discussing their adventures in Animal Crossing. Players could trade secrets, ask for help, and share pictures of their virtual homes. This might sound like a model community to you, but you would be wrong. One day, a player discovered a hidden field in the forum’s user profile form. Normally, this page allows users to change their name, their password, or their profile photo. This person discovered that the hidden field contained their unique user ID, which identifies them when the forum’s backend saves profile changes to its database. They discovered that by modifying the form to change the user ID, they could make changes to any other player’s profile. Needless to say, this idyllic online community descended into chaos. Users changed each other’s passwords, deleted each other’s messages, and attacked each-other under the cover of complete anonym… 2018 Katie Fenn katiefenn 2018-12-01T00:00:00+00:00 https://24ways.org/2018/securing-your-site-like-its-1999/ code
264 264 Dynamic Social Sharing Images Way back when social media was new, you could be pretty sure that whatever you posted would be read by those who follow you. If you’d written a blog post and you wanted to share it with those who follow you, you could post a link and your followers would see it in their streams. Oh heady days! With so many social channels and a proliferation of content and promotions flying past in everyone’s streams, it’s no longer enough to share content on social media, you have to actively sell it if you want it to be seen. You really need to make the most of every opportunity to catch a reader’s attention if you’re trying to get as many eyes as possible on that sweet, sweet social content. One of the best ways to grab attention with your posts or tweets is to include an image. There’s heaps of research that says that having images in your posts helps them stand out to followers. Reports I found showed figures from anything from 35% to 150% improvement from just having image in a post. Unfortunately, the details were surrounded with gross words like engagement and visual marketing assets and so I had to close the page before I started to hate myself too much. So without hard stats to quote, we’ll call it a rule of thumb. The rule of thumb is that posts with images will grab more attention than those without, so it makes sense that when adding pages to a website, you should make sure that they have social media sharing images associated with them. Adding sharing images The process for declaring an image to be used in places like Facebook and Twitter is very simple, and at this point is familiar to many of us. You add a meta tag to the head of the page to point to the location of the image to use. When a link to the page is added to a post, the social network will fetch the page, look for the meta tag and then use the image you specified. <meta property="og:image" content="https://example.com/my_image.jpg"> There’s a good post on this over at CSS-Tricks if you need to bone up on the details of this and other similar meta tags … 2018 Drew McLellan drewmclellan 2018-12-24T00:00:00+00:00 https://24ways.org/2018/dynamic-social-sharing-images/ code
193 193 Web Content Accessibility Guidelines—for People Who Haven't Read Them I’ve been a huge fan of the Web Content Accessibility Guidelines 2.0 since the World Wide Web Consortium (W3C) published them, nine years ago. I’ve found them practical and future-proof, and I’ve found that they can save a huge amount of time for designers and developers. You can apply them to anything that you can open in a browser. My favourite part is when I use the guidelines to make a website accessible, and then attend user-testing and see someone with a disability easily using that website. Today, the United Nations International Day of Persons with Disabilities, seems like a good time to re-read Laura Kalbag’s explanation of why we should bother with accessibility. That should motivate you to devour this article. If you haven’t read the Web Content Accessibility Guidelines 2.0, you might find them a bit off-putting at first. The editors needed to create a single standard that countries around the world could refer to in legislation, and so some of the language in the guidelines reads like legalese. The editors also needed to future-proof the guidelines, and so some terminology—such as “time-based media” and “programmatically determined”—can sound ambiguous. The guidelines can seem lengthy, too: printing the guidelines, the Understanding WCAG 2.0 document, and the Techniques for WCAG 2.0 document would take 1,200 printed pages. This festive season, let’s rip off that legalese and ambiguous terminology like wrapping paper, and see—in a single article—what gifts the Web Content Accessibility Guidelines 2.0 editors have bestowed upon us. Can your users perceive the information on your website? The first guideline has criteria that help you prevent your users from asking “What the **** is this thing here supposed to be?” 1.1.1 Text is the most accessible format for information. Screen readers—such as the “VoiceOver” setting on your iPhone or the “TalkBack” app on your Android phone—understand text better than any other format. The same applies for other assistive technology, such as translation apps and Braill… 2017 Alan Dalton alandalton 2017-12-03T00:00:00+00:00 https://24ways.org/2017/wcag-for-people-who-havent-read-them/ code
194 194 Design Systems and Hybrids The other day on Twitter, I saw a thread started by Dorian Taylor about why design systems are so hot right now. In the thread, he made the case that they’ve been around for ages and some folks were just slow to catch up. It was an interesting thread, and not the first time I’ve seen folks discuss this. “Design systems are so hot right now” was even used recently in this very publication. And yes it’s true that they’ve been around for ages. Design artefact collectors’ obsession with reprints of old graphic standards manuals of the past are a reminder. Sometimes old things become new again, either through a rediscovery or awakening (wow, that sounds really deep). But I think that’s definitely what happened here. Some very opinionated answers that come to mind for me are: The need for them has increased with the needs of software development. With the increasing number of devices (phones, tablets, watches, etc.), scaling design has required the need to double down on systems thinking and processes. Investments with huge cost-saving returns. The time investment it takes to onboard new people as you staff up large teams (and the time it takes to fix bugs and inconsistencies) could be better spent building up a system that lets you ship at a faster pace. It also gives you more time to focus on the bigger picture instead of what color a button border is. If you do have to onboard new designers, the design system is a great educational resource to get up to speed quickly on your organization’s design principles, materials/tools, and methods. “Here’s the simple truth: you can’t innovate on products without first innovating the way you build them.” — Alex Schleifer, The Way We Build These are just some of the reasons. But there is another answer, and a personal conclusion that I’ve reached. It relates to the way I work and what I love working on, but I don’t see it talked about much. Hybrids Have a Home I’m a hybrid designer. I code in HTML & CSS (with a preference for Sass). But I don’t call myself a frontend develop… 2017 Jina Anne jina 2017-12-22T00:00:00+00:00 https://24ways.org/2017/design-systems-and-hybrids/ process
195 195 Levelling Up for Junior Developers If you are a junior developer starting out in the web industry, things can often seem a little daunting. There are so many things to learn, and as soon as you’ve learnt one framework or tool, there seems to be something new out there. I am lucky enough to lead a team of developers building applications for the web. During a recent One to One meeting with one of our junior developers, he asked me about a learning path and the basic fundamentals that every developer should know. After a bit of digging around, I managed to come up with a (not so exhaustive) list of principles that was shared with him. In this article, I will share the list with you, and hopefully help you level up from junior developer and become a better developer all round. This list doesn’t focus on an particular programming language, but rather coding concepts as a whole. The idea behind this list is that whether you are a front-end developer, back-end developer, full stack developer or just a curious one, these principles apply to everyone that writes code. I have tried to be technology agnostic, so that you can use these tips to guide you, whatever your tech stack might be. Without any further ado and in no particular order, let’s get started. Refactoring code like a boss The Boy Scouts have a rule that goes “always leave the campground cleaner than you found it.” This rule can be applied to code too and ensures that you leave code cleaner than you found it. As a junior developer, it’s almost certain that you will either create or come across older code that could be improved. The resources below are a guide that will help point you in the right direction. My favourite book on this subject has to be Clean Code by Robert C. Martin. It’s a must read for anyone writing code as it helps you identify bad code and shows you techniques that you can use to improve existing code. If you find that in your day to day work you deal with a lot of legacy code, Improving Existing Technology through Refactoring is another useful read. Design Patterns are a… 2017 Dean Hume deanhume 2017-12-05T00:00:00+00:00 https://24ways.org/2017/levelling-up-for-junior-developers/ code
196 196 Designing a Remote Project I came across an article recently, which I have to admit made my blood boil a little. Yes, I know it’s the season of goodwill and all that, and I’m going to risk sounding a little Scrooge-like, but I couldn’t help it. It was written by someone who’d tried out ‘telecommuting’ (big sigh) a.k.a. remote or distributed working. They’d tested it in their company and decided it didn’t work. Why did it enrage me so much? Well, this person sounded like they’d almost set it up to fail. To them, it was the latest buzzword, and they wanted to offer their employees a ‘perk’. But it was going to be risky, because, well, they just couldn’t trust their employees not to be lazy and sit around in their pyjamas at home, watching TV, occasionally flicking their mousepad to ‘appear online’. Sounds about right, doesn’t it? Well, no. This attitude towards remote working is baked in the past, where working from one office and people all sitting around together in a cosy circle singing kum-by-yah* was a necessity not an option. We all know the reasons remote working and flexibility can happen more easily now: fast internet, numerous communication channels, and so on. But why are companies like Yahoo! and IBM backtracking on this? Why is there still such a negative perception of this way of working when it has so much real potential for the future? *this might not have ever really happened in an office. So what is remote working? It can come in various formats. It’s actually not just the typical office worker, working from home on a specific day. The nature of digital projects has been changing over a number of years. In this era where organisations are squeezing budgets and trying to find the best value wherever they can, it seems that the days of whole projects being tackled by one team, in the same place, is fast becoming the past. What I’ve noticed more recently is a much more fragmented way of putting together a project – a mixture of in-house and agency, or multiple agencies or organisations, or working with an offshore team. In th… 2017 Suzanna Haworth suzannahaworth 2017-12-06T00:00:00+00:00 https://24ways.org/2017/designing-a-remote-project/ business
197 197 Designing for Mobile Performance Last year, some colleagues at Google ran a research study titled “The Need for Mobile Speed” to find out what the impact of performance and perception of speed had on the way people use the web on their mobile devices. That’s not a trivial distinction; when considering performance, how fast something feels is often more important than how fast it actually is. When dealing with sometimes underpowered mobile devices and slow mobile networks, designing experiences that feel fast is exceptionally important. One of the most startling numbers we found in the study was that 53% of mobile site visits are abandoned if pages take longer than 3 seconds to load. We wanted to find out more, so following on from this study, we conducted research to define what the crucial elements of speed are. We took into consideration the user experience (UX), overall perception of speed, and how differing contexts the user finds themselves in can alter how fast a user thinks something loaded. To understand speed and load times first we must understand that user mobile web behaviour is broken down into three buckets; Intention Location State of mind Let’s look at each of those in turn. Intention Users browse sites on a mobile device for many different reasons. To be able to effectively design a performant user experience for them, it’s important to understand what those reasons might be. When asked to describe their reason for visiting a site, approximately 30% of people asked by the study claimed that they were simply browsing without a particular purpose in mind. Looking deeper, we found that this number increased slightly (34%) for retail sites. 30% said they were just there to find out some information for a future task or action, such as booking a flight. Interestingly, the research shows that users are actually window shopping using their mobile browser. Only 29% actually said they had a specific goal or intent in mind, and this number increases significantly for financial services like banking sites (57%). This goes against a trad… 2017 Mustafa Kurtuldu mustafakurtuldu 2017-12-18T00:00:00+00:00 https://24ways.org/2017/designing-for-mobile-performance/ ux
198 198 Is Your Website Accidentally Sexist? Women make up 51% of the world’s population. More importantly, women make 85% of all purchasing decisions about consumer goods, 75% of the decisions about buying new homes, and 81% of decisions about groceries. The chances are, you want your website to be as attractive to women as it is to men. But we are all steeped in a male-dominated culture that subtly influences the design and content decisions we make, and some of those decisions can result in a website that isn’t as welcoming to women as it could be. Typography tells a story Studies show that we make consistent judgements about whether a typeface is masculine or feminine: Masculine typography has a square or geometric form with hard corners and edges, and is emphatically either blunt or spiky. Serif fonts are also considered masculine, as is bold type and capitals. Feminine typography favours slim lines, curling or flowing shapes with a lot of ornamentation and embellishment, and slanted letters. Sans-serif, cursive and script fonts are seen as feminine, as are lower case letters. The effect can be so subtle that even choosing between bold and regular styles within a single font family can be enough to indicate masculinity or femininity. If you want to appeal to both men and women, search for fonts that are gender neutral, or at least not too masculine. When you’re choosing groups of fonts that need to work harmoniously together, consider which fonts you are prioritising in your design. Is the biggest word on the page in a masculine or feminine font? What about the smallest words? Is there an imbalance between the prominence of masculine and feminine fonts, and what does this imply? Typography is a language in and of itself, so be careful what you say with it. Colour me unsurprised Colour also has an obvious gender bias. We associate pinks and purples, especially in combination, with girls and women, and a soft pink has become especially strongly related to breast cancer awareness campaigns. On the other hand, pale blue is strongly associated with boy… 2017 Suw Charman-Anderson suwcharmananderson 2017-12-20T00:00:00+00:00 https://24ways.org/2017/is-your-website-accidentally-sexist/ content
199 199 Knowing the Future - Tips for a Happy Launch Day You’ve chosen your frameworks and libraries. You’ve learned how to write code which satisfies the buzzword and performance gods. Now you need to serve it to a global audience, and make things easy to preview, to test, to sign-off, and to evolve. But infrastructure design is difficult and boring for most of us. We just want to get our work out into the wild. If only we had tools which would let us go, “Oh yeah! It all deploys perfectly every time” and shout, “You need another release? BAM! What’s next?” A truth that can be hard to admit is that very often, the production environment and its associated deployment processes are poorly defined until late into a project. This can be a problem. It makes my palms sweaty just thinking about it. If like me, you have spent time building things for clients, you’ll probably have found yourself working with a variety of technical partners and customers who bring different constraints and opportunities to your projects. Knowing and proving the environments and the deployment processes is often very difficult, but can be a factor which profoundly impacts our ability to deliver what we promised. To say nothing of our ability to sleep at night or leave our fingernails un-chewed. Let’s look at this a little, and see if we can’t set you up for a good night’s sleep, with dry palms and tidy fingernails. A familiar problem You’ve been here too, right? The project development was tough, but you’re pleased with what you are running in your local development environments. Now you need to get the client to see and approve your build, and hopefully indicate with a cheery thumbs up that it can “go live”. Chances are that we have a staging environment where the client can see the build. But be honest, is this exactly the same as the production environment? It should be, but often it’s not. Often the staging environment is nothing more than a visible server with none of the optimisations, security, load balancing, caching, and other vital bits of machinery that we’ll need (and need to test) … 2017 Phil Hawksworth philhawksworth 2017-12-21T00:00:00+00:00 https://24ways.org/2017/knowing-the-future/ process
200 200 Care and Feeding of Burnout You’ve been doing too much for too long. And it’s broken you. You’re burned out. You’re done. Illustration by Kate Holden Occupational burnout is a long-documented effect of stretching yourself further than the limits of your mental and physical health can carry you. And when it finally catches up with you, it can feel like the end of the world. But things can get better. With focused self care, reworking your priorities and lots of time, you can slog through burnout. What is burnout? The Tl;dr linkdump tour In this article, we’ll be looking at what you can do when you’re burned out. We’ll be skipping past a lot of information on what burnout is, what causes it and how it impacts the tech industry. We’re able to skip past this because many technologists have already created valuable content targeted to our industry. The videos and writing below may be helpful for readers who are less familiar with burnout. A Wikipedia article may be a great starting point for learning about occupational burnout. Understanding burnout: Brandon West This conference talk by Brandon West covers a lot of burnout 101, from the perspective of a developer relations/community professional. April Wensel writes about the need for the tech industry to move from the Valley’s burnout culture to a more sustainable model. Catching Burnout [as] early [as possible] One of the most challenging things about burnout is that it develops slowly and gradually. Many impacted don’t notice the water warming around them until it’s been brought to a boil, causing a crisis that can’t be overlooked. Catching burnout and taking steps to deal with it as early as possible can help limit the length and severity of your burnout. Getting in the habit of checking in with yourself regularly about your stress and energy levels can be an effective habit for assessing burnout and for general wellness. The Mayo Clinic recommends asking yourself the following questions to determine if you might be suffering from burnout. Have you become cynical or critical at work? D… 2017 Jessica Rose jessicarose 2017-12-16T00:00:00+00:00 https://24ways.org/2017/care-and-feeding-of-burnout/ process
201 201 Lint the Web Forward With Sonarwhal Years ago, when I was in a senior in college, much of my web development courses focused on two things: the basics like HTML and CSS (and boy, do I mean basic), and Adobe Flash. I spent many nights writing ActionScript 3.0 to build interactions for the websites that I would add to my portfolio. A few months after graduating, I built one website in Flash for a client, then never again. Flash was dying, and it became obsolete in my résumé and portfolio. That was my first lesson in the speed at which things change in technology, and what a daunting realization that was as a new graduate looking to enter the professional world. Now, seven years later, I work on the Microsoft Edge team where I help design and build a tool that would have lessened my early career anxieties: sonarwhal. Sonarwhal is a linting tool, built by and for the web community. The code is open source and lives under the JS Foundation. It helps web developers and designers like me keep up with the constant change in technology while simultaneously teaching how to code better websites. Introducing sonarwhal’s mascot Nellie Good web development is hard. It is more than HTML, CSS, and JavaScript: developers are expected to have a grasp of accessibility, performance, security, emerging standards, and more, all while refreshing this knowledge every few months as the web evolves. It’s a lot to keep track of.   Web development is hard Staying up-to-date on all this knowledge is one of the driving forces for developing this scanning tool. Whether you are just starting out, are a student, or you have over a decade of experience, the sonarwhal team wants to help you build better websites for all browsers. Currently sonarwhal checks for best practices in five categories: Accessibility, Interoperability, Performance, PWAs, and Security. Each check is called a “rule”. You can configure them and even create your own rules if you need to follow some specific guidelines for your project (e.g. validate analytics attributes, title format of pages, etc.). You c… 2017 Stephanie Drescher stephaniedrescher 2017-12-02T00:00:00+00:00 https://24ways.org/2017/lint-the-web-forward-with-sonarwhal/ code
202 202 Design Systems and CSS Grid Recently, my client has been looking at creating a few new marketing pages for their website. They currently have a design system in place but they’re looking to push this forward into 2018 with some small and possibly some larger changes. To start with we are creating a couple of new marketing pages. As well as making use of existing components within the design systems component library there are a couple of new components. Looking at the first couple of sketch files I felt this would be a great opportunity to use CSS Grid, to me the newer components need to be laid out on that page and grid would help with this perfectly. As well as this layout of the new components and the text within it, imagery would be used that breaks out of the grid and pushes itself into the spaces where the text is aligned. The existing grid system When the site was rebuilt in 2015 the team decided to make use of Sass and Susy, a “lightweight grid-layout engine using Sass”. It was built separating the grid system from the components that would be laid out on the page with a container, a row, an optional column, and a block. To make use of the grid system on a page for a component that would take the full width of the row you would have to write something like this: <div class="grid-container"> <div class="grid-row"> <div class="grid-column-4"> <div class="grid-block"> <!-- component code here --> </div> </div> </div> </div> Using a grid system similar to this can easily create quite the tag soup. It could fill the HTML full of divs that may become complex to understand and difficult to edit. Although there is this reliance on several <div>s to lay out the components on a page it does allow a tidy way to place the component code within that page. It abstracts the layout of the page to its own code, its own system, so the components can ‘fit’ where needed. The requirements of the new grid system Moving forward I set myself some goals for what I’d like to have achieved in this new grid system: It needs to… 2017 Stuart Robson stuartrobson 2017-12-12T00:00:00+00:00 https://24ways.org/2017/design-systems-and-css-grid/ code
203 203 Jobs-to-Be-Done in Your UX Toolbox Part 1: What is JTBD? The concept of a “job” in “Jobs-To-Be-Done” is neatly encapsulated by a oft-quoted line from Theodore Levitt: “People want a quarter-inch hole, not a quarter inch drill”. Even so, Don Norman pointed out that perhaps Levitt “stopped too soon” at what the real customer goal might be. In the “The Design of Everyday Things”, he wrote: “Levitt’s example of the drill implying that the goal is really a hole is only partially correct, however. When people go to a store to buy a drill, that is not their real goal. But why would anyone want a quarter-inch hole? Clearly that is an intermediate goal. Perhaps they wanted to hang shelves on the wall. Levitt stopped too soon. Once you realize that they don’t really want the drill, you realize that perhaps they don’t really want the hole, either: they want to install their bookshelves. Why not develop methods that don’t require holes? Or perhaps books that don’t require bookshelves.” In other words, a “job” in JTBD lingo is a way to express a user need or provide a customer-centric problem frame that’s independent of a solution. As Tony Ulwick says: “A job is stable, it doesn’t change over time.” An example of a job is “tiding you over from breakfast to lunch.” You could hire a donut, a flapjack or a banana for that mid-morning snack—whatever does the job. If you can arrive at a clearly identified primary job (and likely some secondary ones too), you can be more creative in how you come up with an effective solution while keeping the customer problem in focus. The team at Intercom wrote a book on their application of JTBD. In it, Des Traynor cleverly characterised how JTBD provides a different way to think about solutions that compete for the same job: “Economy travel and business travel are both capable candidates applying for [the job: Get me face-to-face with my colleague in San Francisco], though they’re looking for significantly different salaries. Video conferencing isn’t as capable, but is willing to work for a … 2017 Steph Troeth stephtroeth 2017-12-04T00:00:00+00:00 https://24ways.org/2017/jobs-to-be-done-in-your-ux-toolbox/ ux
204 204 Cascading Web Design with Feature Queries Feature queries, also known as the @supports rule, were introduced as an extension to the CSS2 as part of the CSS Conditional Rules Module Level 3, which was first published as a working draft in 2011. It is a conditional group rule that tests if the browser’s user agent supports CSS property:value pairs, and arbitrary conjunctions (and), disjunctions (or), and negations (not) of them. The motivation behind this feature was to allow authors to write styles using new features when they were supported but degrade gracefully in browsers where they are not. Even though the nature of CSS already allows for graceful degradation, for example, by ignoring unsupported properties or values without disrupting other styles in the stylesheet, sometimes we need a bit more than that. CSS is ultimately a holistic technology, in that, even though you can use properties in isolation, the full power of CSS shines through when used in combination. This is especially evident when it comes to building web layouts. Having native feature detection in CSS makes it much more convenient to build with cutting-edge CSS for the latest browsers while supporting older browsers at the same time. Browser support Opera first implemented feature queries in November 2012, both Chrome and Firefox had it since May 2013. There have been several articles about feature queries written over the years, however, it seems that awareness of its broad support isn’t that well-known. Much of the earlier coverage on feature queries was not written in English, and perhaps that was a limiting factor. @supports ― CSSのFeature Queries by Masataka Yakura, August 8 2012 Native CSS Feature Detection via the @supports Rule by Chris Mills, December 21 2012 CSS @supports by David Walsh, April 3 2013 Responsive typography with CSS Feature Queries by Aral Balkan, April 9 2013 How to use the @supports rule in your CSS by Lea Verou, January 31 2014 CSS Feature Queries by Amit Tal, June 2 2014 Coming Soon: CSS Feature Queries by Adobe Web Platform Team, August 21 2014 CSS featu… 2017 Chen Hui Jing chenhuijing 2017-12-01T00:00:00+00:00 https://24ways.org/2017/cascading-web-design/ code
205 205 Why Design Systems Fail Design systems are so hot right now, and for good reason. They promote a modular approach to building a product, and ensure organizational unity and stability via reusable code snippets and utility styles. They make prototyping a breeze, and provide a common language for both designers and developers. A design system is a culmination of several individual components, which can include any or all of the following (and more): Style guide or visual pattern library Design tooling (e.g. Sketch Library) Component library (where the components live in code) Code usage guidelines and documentation Design usage documentation Voice and tone guideline Animation language guideline Design systems are standalone (internal or external) products, and have proven to be very effective means of design-driven development. However, in order for a design system to succeed, everyone needs to get on board. I’d like to go over a few considerations to ensure design system success and what could hinder that success. Organizational Support Put simply, any product, including internal products, needs support. Something as cross-functional as a design system, which spans every vertical project team, needs support from the top and bottom levels of your organization. What I mean by that is that there needs to be top-level support from project managers up through VP’s to see the value of a design system, to provide resources for its implementation, and advocate for its use company-wide. This is especially important in companies where such systems are being put in place on top of existing, crufty codebases, because it may mean there needs to be some time and effort put in the calendar for refactoring work. Support from the bottom-up means that designers and engineers of all levels also need to support this system and feel responsibility for it. A design system is an organization’s product, and everyone should feel confident contributing to it. If your design system supports external clients as well (such as contractors), they too can become val… 2017 Una Kravets unakravets 2017-12-14T00:00:00+00:00 https://24ways.org/2017/why-design-systems-fail/ process
206 206 Getting Hardboiled with CSS Custom Properties Custom Properties are a fabulous new feature of CSS and have widespread support in contemporary browsers. But how do we handle browsers without support for CSS Custom Properties? Do we wait until those browsers are lying dead in a ditch before we use them? Do we tool up and prop up our CSS using a post-processor? Or do we get tough? Do we get hardboiled? Previously only pre-processing tools like LESS and Sass enabled developers to use variables in their stylesheets, but now Custom Properties have brought variables natively to CSS. How do you write a custom property? It’s hardly a mystery. Simply add two dashes to the start of a style rule. Like this: --color-text-default : black; If you’re more the underscore type, try this: --color_text_default : black; Hyphens or underscores are allowed in property names, but don’t be a chump and try to use spaces. Custom property names are also case-sensitive, so --color-text-default and --Color_Text_Default are two distinct properties. To use a custom property in your style rules, var() tells a browser to retrieve the value of a property. In the next example, the browser retrieves the black colour from the color-text-default variable and applies it to the body element: body { color : var(--color-text-default); } Like variables in LESS or Sass, CSS Custom Properties mean you don’t have to be a dumb mug and repeat colour, font, or size values multiple times in your stylesheets. Unlike a preprocessor variable though, CSS Custom Properties use the cascade, can be modified by media queries and other state changes, and can also be manipulated by Javascript. (Serg Hospodarets wrote a fabulous primer on CSS Custom Properties where he dives deeper into the code and possible applications.) Browser support Now it’s about this time that people normally mention browser support. So what about support for CSS Custom Properties? Current versions of Chrome, Edge, Firefox, Opera, and Safari are all good. Internet Explorer 11 and before? Opera Mini? Nasty. Sound familiar? Can I Use css… 2017 Andy Clarke andyclarke 2017-12-13T00:00:00+00:00 https://24ways.org/2017/getting-hardboiled-with-css-custom-properties/ code
207 207 Want to Break Out of Comparison Syndrome? Do a Media Detox “Comparison is the thief of joy.” —Theodore Roosevelt I grew up in an environment of perpetual creativity and inventiveness. My father Dennis built and flew experimental aircraft as a hobby. During my entire childhood, there was an airplane fuselage in the garage instead of a car. My mother Deloria was a self-taught master artisan who could quickly acquire any skills that it took to work with fabric and weaving. She could sew any garment she desired, and was able to weave intricate wall hangings just by looking at a black and white photos in magazines. My older sister Diane blossomed into a consummate fine artist who drew portraits with uncanny likeness, painted murals, and studied art and architecture. In addition, she loved good food and had a genius for cooking and baking, which converged in her creating remarkable art pieces out of cake that were incredibly delicious to boot. Yes. This was the household in which I grew up. While there were countless positives to being surrounded by people who were compelled to create, there was also a downside to it. I incessantly compared myself to my parents and older sister and always found myself lacking. It wasn’t a fair comparison, but tell that to a sensitive kid who wanted to fit in to her family by being creative as well. From my early years throughout my teens, I convinced myself that I would never understand how to build an airplane or at least be as proficient with tools as my father, the aeronautical engineer. Even though my sister was six years older than I was, I lamented that I would never be as good a visual artist as she was. And I marveled at my mother’s seemingly magical ability to make and tailor clothes and was certain that I would never attain her level of mastery. This habit of comparing myself to others grew over the years, continuing to subtly and effectively undermine my sense of self. I had almost reached an uneasy truce with my comparison habit when social media happened. As an early adopter of Twitter, I loved staying connected to people I met a… 2017 Denise Jacobs denisejacobs 2017-12-19T00:00:00+00:00 https://24ways.org/2017/do-a-media-detox/ process
208 208 All That Glisters Tradition has it that at this time of year, families gather together, sit, eat and share stories. It’s an opportunity for the wisdom of the elders to be passed down to the younger members of the tribe. Tradition also has it that we should chase cheese downhill and dunk the nice lady to prove she’s a witch, so maybe let’s not put too much stock in that. I’ve been building things on the web professionally for about twenty years, and although the web has changed immeasurably, it’s probably not changed as much as I have. While I can happily say I’m not the young (always right, always arrogant) developer that I once was, unfortunately I’m now an approaching-middle-age developer who thinks he’s always right and on top of it is extremely pompous. What can you do? Nature has devised this system with the distinct advantage of allowing us to always be right, and only ever wrong in the future or in the past. So let’s roll with it. Increasingly, there seems to be a sense of fatigue within our industry. Just when you think you’ve got a handle on whatever the latest tool or technology is, something new comes out to replace it. Suddenly you find that you’ve invested precious time learning something new and it’s already old hat. The pace of change is so rapid, that new developers don’t know where to start, and experienced developers don’t know where it ends. With that in mind, here’s some fireside thoughts from a pompous old developer, that I hope might bring some Christmas comfort. Reliable and boring beats shiny and new There are so many new tools, frameworks, techniques, styles and libraries to learn. You know what? You don’t have to use them. You’re not a bad developer if you use Grunt even though others have switched to Gulp or Brunch or Webpack or Banana Sandwich. It’s probably misguided to spend lots of project time messing around with build tool fashions when your so last year build tool is already doing what you need. Just a little reminder that it’s about 100 times more important what you build than how you build it.— … 2017 Drew McLellan drewmclellan 2017-12-24T00:00:00+00:00 https://24ways.org/2017/all-that-glisters/ business
209 209 Feeding the Audio Graph In 2004, I was given an iPod. I count this as one of the most intuitive pieces of technology I’ve ever owned. It wasn’t because of the the snazzy (colour!) menus or circular touchpad. I loved how smoothly it fitted into my life. I could plug in my headphones and listen to music while I was walking around town. Then when I got home, I could plug it into an amplifier and carry on listening there. There was no faff. It didn’t matter if I could find my favourite mix tape, or if my WiFi was flakey - it was all just there. Nowadays, when I’m trying to pair my phone with some Bluetooth speakers, or can’t find my USB-to-headphone jack, or even access any music because I don’t have cellular reception; I really miss this simplicity. The Web Audio API I think the Web Audio API feels kind of like my iPod did. It’s different from most browser APIs - rather than throwing around data, or updating DOM elements - you plug together a graph of audio nodes, which the browser uses to generate, process, and play sounds. The thing I like about it is that you can totally plug it into whatever you want, and it’ll mostly just work. So, let’s get started. First of all we want an audio source. <audio src="night-owl.mp3" controls /> (Song - Night Owl by Broke For Free) This totally works. However, it’s not using the Web Audio API, so we can’t access or modify the sound it makes. To hook this up to our audio graph, we can use an AudioSourceNode. This captures the sound from the element, and lets us connect to other nodes in a graph. const audioCtx = new AudioContext() const audio = document.querySelector('audio') const input = audioCtx.createAudioSourceNode(audio) input.connect(audioCtx.destination) Great. We’ve made something that looks and sounds exactly the same as it did before. Go us. Gain Let’s plug in a GainNode - this allows you to alter the amplitude (volume) of an an audio stream. We can hook this node up to an <input> element by setting the gain property of the node. (The syntax for this is kind of weird because it’s an Au… 2017 Ben Foxall benfoxall 2017-12-17T00:00:00+00:00 https://24ways.org/2017/feeding-the-audio-graph/ code
210 210 Stop Leaving Animation to the Last Minute Our design process relies heavily on static mockups as deliverables and this makes it harder than it needs to be to incorporate UI animation in our designs. Talking through animation ideas and dancing out the details of those ideas can be fun; but it’s not always enough to really evaluate or invest in animated design solutions. By including deliverables that encourage discussing animation throughout your design process, you can set yourself (and your team) up for creating meaningful UI animations that feel just as much a part of the design as your colour palette and typeface. You can get out of that “running out of time to add in the animation” trap by deliberately including animation in the early phases of your design process. This will give you both the space to treat animation as a design tool, and the room to iterate on UI animation ideas to come up with higher quality solutions. Two deliverables that can be especially useful for this are motion comps and animated interactive prototypes. Motion comps - an animation deliverable Motion comps (also called animatics or motion mock-ups) are usually video representation of UI animations. They are used to explore the details of how a particular animation might play out. And they’re most often made with timeline-based tools like Adobe After Effects, Adobe Animate, or Tumult Hype. The most useful things about motion comps is how they allow designers and developers to share the work of creating animations. (Instead of pushing all the responsibility of animation on one group or the other.) For example, imagine you’re working on a design that has a content panel that can either be open or closed. You might create a mockup like the one below including the two different views: the closed state and the open state. If you’re working with only static deliverables, these two artboards might be exactly what you handoff to developers along with the instruction to animate between the two. On the surface that seems pretty straight forward, but even with this relatively simple… 2017 Val Head valhead 2017-12-08T00:00:00+00:00 https://24ways.org/2017/stop-leaving-animation-to-the-last-minute/ design
211 211 Automating Your Accessibility Tests Accessibility is one of those things we all wish we were better at. It can lead to a bunch of questions like: how do we make our site better? How do we test what we have done? Should we spend time each day going through our site to check everything by hand? Or just hope that everyone on our team has remembered to check their changes are accessible? This is where automated accessibility tests can come in. We can set up automated tests and have them run whenever someone makes a pull request, and even alongside end-to-end tests, too. Automated tests can’t cover everything however; only 20 to 50% of accessibility issues can be detected automatically. For example, we can’t yet automate the comparison of an alt attribute with an image’s content, and there are some screen reader tests that need to be carried out by hand too. To ensure our site is as accessible as possible, we will still need to carry out manual tests, and I will cover these later. First, I’m going to explain how I implemented automated accessibility tests on Elsevier’s ecommerce pages, and share some of the lessons I learnt along the way. Picking the right tool One of the hardest, but most important parts of creating our automated accessibility tests was choosing the right tool. We began by investigating aXe CLI, but soon realised it wouldn’t fit our requirements. It couldn’t check pages that required a visitor to log in, so while we could test our product pages, we couldn’t test any customer account pages. Instead we moved over to Pa11y. Its beforeScript step meant we could log into the site and test pages such as the order history. The example below shows the how the beforeScript step completes a login form and then waits for the login to complete before testing the page: beforeScript: function(page, options, next) { // An example function that can be used to make sure changes have been confirmed before continuing to run Pa11y function waitUntil(condition, retries, waitOver) { page.evaluate(condition, function(err, result) { if (result … 2017 Seren Davies serendavies 2017-12-07T00:00:00+00:00 https://24ways.org/2017/automating-your-accessibility-tests/ code
212 212 Refactoring Your Way to a Design System I love refactoring code. Absolutely love it. There’s something about taking a piece of UI or a bit of code and reworking it in a way that is simpler, modular, and reusable that makes me incredibly happy. I also love design systems work. It gives hybrids like me a home. It seems like everyone is talking about design systems right now. Design systems teams are perfect for those who enjoy doing architectural work and who straddle the line between designer and developer. Una Kravets recently identified some of the reasons that design systems fail, and chief among them are lack of buy-in, underlying architecture, and communication. While it’s definitely easier to establish these before project work begins, that doesn’t mean it is the only path to success. It’s a privilege to work on a greenfield project, and one that is not afforded to many. Companies with complex and/or legacy codebases may not be able to support a full rewrite of their product. In addition, many people feel overwhelmed at the thought of creating a complete system and are at a loss of how or where to even begin the process. This is where refactoring comes into play. According to Martin Fowler, “refactoring is the process of changing a software system in such a way that it does not alter the external behavior of the code yet improves its internal structure.” It’s largely invisible work, and if you do it right, the end user will never know the difference. What it will do is provide a decent foundation to begin more systematic work. Build a solid foundation When I was first asked to create Pantsuit, the design system for Hillary for America, I was tasked with changing our codebase to be more modular and scalable, without changing the behavior or visual design of the UI. We needed a system in place that would allow for the rapid creation of new projects while maintaining a consistent visual language. In essence, I was asked to refactor our code into a design system. During that refactor, I focused the majority of my efforts on creating a scalable arch… 2017 Mina Markham minamarkham 2017-12-23T00:00:00+00:00 https://24ways.org/2017/refactoring-your-way-to-a-design-system/ code
213 213 Accessibility Through Semantic HTML Working on Better, a tracker blocker, I spend an awful lot of my time with my nose in other people’s page sources. I’m mostly there looking for harmful tracking scripts, but often notice the HTML on some of the world’s most popular sites is in a sad state of neglect. What does neglected HTML look like? Here’s an example of the markup I found on a news site just yesterday. There’s a bit of text, a few links, and a few images. But mostly it’s div elements. <div class="block_wrapper"> <div class="block_content"> <div class="box"> <div id="block1242235"> <div class="column"> <div class="column_content"> <a class="close" href="#"><i class="fa"></i></a> </div> <div class="btn account_login"></div> Some text <span>more text</span> </div> </div> </div> </div> </div> divs and spans, why do we use them so much? While I find tracking scripts completely inexcusable, I do understand why people write HTML like the above. As developers, we like to use divs and spans as they’re generic elements. They come with no associated default browser styles or behaviour except that div displays as a block, and span displays inline. If we make our page up out of divs and spans, we know we’ll have absolute control over styles and behaviour cross-browser, and we won’t need a CSS reset. Absolute control may seem like an advantage, but there’s a greater benefit to less generic, more semantic elements. Browsers render semantic elements with their own distinct styles and behaviours. For example, button looks and behaves differently from a. And ul is different from ol. These defaults are shortcuts to a more usable and accessible web. They provide consistent and well-tested components for common interactions. Semantic elements aid usability A good example of how browser defaults can benefit the usability of an element is in the <select> option menu. In Safari on the desktop, the browser renders <select> as a popover-style menu. On a touchscreen, Safari overl… 2017 Laura Kalbag laurakalbag 2017-12-15T00:00:00+00:00 https://24ways.org/2017/accessibility-through-semantic-html/ code
214 214 Christmas Gifts for Your Future Self: Testing the Web Platform In the last year I became a CSS specification editor, on a mission to revitalise CSS Multi-column layout. This has involved learning about many things, one of which has been the Web Platform Tests project. In this article, I’m going to share what I’ve learned about testing the web platform. I’m also going to explain why I think you might want to get involved too. Why test? At one time or another it is likely that you have been frustrated by an issue where you wrote some valid CSS, and one browser did one thing with it and another something else entirely. Experiences like this make many web developers feel that browser vendors don’t work together, or they are actively doing things in a different way to one another to the detriment of those of us who use the platform. You’ll be glad to know that isn’t the case, and that the people who work on browsers want things to be consistent just as much as we do. It turns out however that interoperability, which is the official term for “works in all browsers”, is hard. Thanks to web-platform-tests, a test from another browser vendor just found genuine bug in our code before we shipped 😻— Brian Birtles (@brianskold) February 10, 2017 In order for W3C Specifications to move on to become W3C Recommendations we need to have interoperable implementations. 6.2.4 Implementation Experience Implementation experience is required to show that a specification is sufficiently clear, complete, and relevant to market needs, to ensure that independent interoperable implementations of each feature of the specification will be realized. While no exhaustive list of requirements is provided here, when assessing that there is adequate implementation experience the Director will consider (though not be limited to): is each feature of the current specification implemented, and how is this demonstrated? are there independent interoperable implementations of the current specification? are there implementations created by people other than the authors of the specification? are implementations publi… 2017 Rachel Andrew rachelandrew 2017-12-10T00:00:00+00:00 https://24ways.org/2017/testing-the-web-platform/ code
215 215 Teach the CLI to Talk Back The CLI is a daunting tool. It’s quick, powerful, but it’s also incredibly easy to screw things up in – either with a mistyped command, or a correctly typed command used at the wrong moment. This puts a lot of people off using it, but it doesn’t have to be this way. If you’ve ever interacted with Slack’s Slackbot to set a reminder or ask a question, you’re basically using a command line interface, but it feels more like having a conversation. (My favourite Slack app is Lunch Train which helps with the thankless task of herding colleagues to a particular lunch venue on time.) Same goes with voice-operated assistants like Alexa, Siri and Google Home. There are even games, like Lifeline, where you interact with a stranded astronaut via pseudo SMS, and KOMRAD where you chat with a Soviet AI. I’m not aiming to build an AI here – my aspirations are a little more down to earth. What I’d like is to make the CLI a friendlier, more forgiving, and more intuitive tool for new or reluctant users. I want to teach it to talk back. Interactive command lines in the wild If you’ve used dev tools in the command line, you’ve probably already used an interactive prompt – something that asks you questions and responds based on your answers. Here are some examples: Yeoman If you have Yeoman globally installed, running yo will start a command prompt. The prompt asks you what you’d like to do, and gives you options with how to proceed. Seasoned users will run specific commands for these options rather than go through this prompt, but it’s a nice way to start someone off with using the tool. npm If you’re a Node.js developer, you’re probably familiar with typing npm init to initialise a project. This brings up prompts that will populate a package.json manifest file for that project. The alternative would be to expect the user to craft their own package.json, which is more error-prone since it’s in JSON format, so something as trivial as an extraneous comma can throw an error. Snyk Snyk is a dev tool that checks for known vulnerabilities… 2017 Anna Debenham annadebenham 2017-12-11T00:00:00+00:00 https://24ways.org/2017/teach-the-cli-to-talk-back/ code
216 216 Styling Components - Typed CSS With Stylable There’s been a lot of debate recently about how best to style components for web apps so that styles don’t accidentally ‘leak’ out of the component they’re meant for, or clash with other styles on the page. Elaborate CSS conventions have sprung up, such as OOCSS, SMACSS, BEM, ITCSS, and ECSS. These work well, but they are methodologies, and require everyone in the team to know them and follow them, which can be a difficult undertaking across large or distributed teams. Others just give up on CSS and put all their styles in JavaScript. Now, I’m not bashing JS, especially so close to its 22nd birthday, but CSS-in-JS has problems of its own. Browsers have 20 years experience in optimising their CSS engines, so JavaScript won’t be as fast as using real CSS, and in any case, this requires waiting for JS to download, parse, execute then render the styles. There’s another problem with CSS-in-JS, too. Since Responsive Web Design hit the streets, most designers no longer make comps in Photoshop or its equivalents; instead, they write CSS. Why hire an expensive design professional and require them to learn a new way of doing their job? A recent thread on Twitter asked “What’s your biggest gripe with CSS-in-JS?”, and the replies were illuminating: “Always having to remember to camelCase properties then spending 10min pulling hair out when you do forget”, “the cryptic domain-specific languages that each of the frameworks do just ever so slightly differently”, “When I test look and feel in browser, then I copy paste from inspector, only to have to re-write it as a JSON object”, “Lack of linting, autocomplete, and css plug-ins for colors/ incrementing/ etc”. If you’re a developer, and you’re still unconvinced, I challenge you to let designers change the font in your IDE to Zapf Chancery and choose a new colour scheme, simply because they like it better. Does that sound like fun? Will that boost your productivity? Thought not. Some chums at Wix Engineering and I wanted to see if we could square this circle. Wix-hosted sites h… 2017 Bruce Lawson brucelawson 2017-12-09T00:00:00+00:00 https://24ways.org/2017/styling-components-typed-css-with-stylable/ code
289 289 Front-End Developers Are Information Architects Too The theme of this year’s World IA Day was “Information Everywhere, Architects Everywhere”. This article isn’t about what you may consider an information architect to be: someone in the user-experience field, who maybe studied library science, and who talks about taxonomies. This is about a realisation I had a couple of years ago when I started to run an increasing amount of usability-testing sessions with people who have disabilities: that the structure, labelling, and connections that can be made in front-end code is information architecture. People’s ability to be successful online is unequivocally connected to the quality of the code that is written. Places made of information In information architecture we talk about creating places made of information. These places are made of ones and zeros, but we talk about them as physical structures. We talk about going onto a social media platform, posting in blogs, getting locked out of an environment, and building applications. In 2002, Andrew Hinton stated: People live and work in these structures, just as they live and work in their homes, offices, factories and malls. These places are not virtual: they are as real as our own minds. 25 Theses We’re creating structures which people rely on for significant parts of their lives, so it’s critical that we carry out our work responsibly. This means we must use our construction materials correctly. Luckily, our most important material, HTML, has a well-documented specification which tells us how to build robust and accessible places. What is most important, I believe, is to understand the semantics of HTML. Semantics The word “semantic” has its origin in Greek words meaning “significant”, “signify”, and “sign”. In the physical world, a structure can have semantic qualities that tell us something about it. For example, the stunning Westminster Abbey inspires awe and signifies much about the intent and purpose of the structure. The building’s size; the quality of the stone work; the massive, detailed stained glass: these … 2016 Francis Storr francisstorr 2016-12-17T00:00:00+00:00 https://24ways.org/2016/front-end-developers-are-information-architects-too/ code
290 290 Creating a Weekly Research Cadence Working on a product team, it’s easy to get hyper-focused on building features and lose sight of your users and their daily challenges. User research can be time-consuming to set up, so it often becomes ad-hoc and irregular, only performed in response to a particular question or concern. But without frequent touch points and opportunities for discovery, your product will stagnate and become less and less relevant. Setting up an efficient cadence of weekly research conversations will re-focus your team on user problems and provide a steady stream of insights for product development. As my team transitioned into a Lean process earlier this year, we needed a way to get more feedback from users in a short amount of time. Our users are internet marketers—always busy and often difficult to reach. Scheduling research took days of emailing back and forth to find mutually agreeable times, and juggling one-off conversations made it difficult to connect with more than one or two people per week. The slow pace of research was allowing additional risk to creep into our product development. I wanted to find a way for our team to test ideas and validate assumptions sooner and more often—but without increasing the administrative burden of scheduling. The solution: creating a regular cadence of research and testing that required a minimum of effort to coordinate. Setting up a weekly user research cadence accelerated our learning and built momentum behind strategic experiments. By dedicating time every week to talk to a few users, we made ongoing research a painless part of every weekly sprint. But increasing the frequency of our research had other benefits as well. With only five working days between sessions, a weekly cadence forced us to keep our work small and iterative. Committing to testing something every week meant showing work earlier and more often than we might have preferred—pushing us out of your comfort zone into a process of more rapid experimentation. Best of all, frequent conversations with users helped us become… 2016 Wren Lanier wrenlanier 2016-12-02T00:00:00+00:00 https://24ways.org/2016/creating-a-weekly-research-cadence/ ux
291 291 Information Literacy Is a Design Problem Information literacy, wrote Dr. Carol Kulthau in her 1987 paper “Information Skills for an Information Society,” is “the ability to read and to use information essential for everyday life”—that is, to effectively navigate a world built on “complex masses of information generated by computers and mass media.” Nearly thirty years later, those “complex masses of information” have only grown wilder, thornier, and more constant. We call the internet a firehose, yet we’re loathe to turn it off (or even down). The amount of information we consume daily is staggering—and yet our ability to fully understand it all remains frustratingly insufficient. This should hit a very particular chord for those of us working on the web. We may be developers, designers, or strategists—we may not always be responsible for the words themselves—but we all know that communication is much more than just words. From fonts to form fields, every design decision that we make changes the way information is perceived—for better or for worse. What’s more, the design decisions that we make feed into larger patterns. They don’t just affect the perception of a single piece of information on a single site; they start to shape reader expectations of information anywhere. Users develop cumulative mental models of how websites should be: where to find a search bar, where to look at contact information, how to filter a product list. And yet: our models fail us. Fundamentally, we’re not good at parsing information, and that’s troubling. Our experience of an “information society” may have evolved, but the skills Dr. Kuhlthau spoke of are even more critical now: our lives depend on information literacy. Patterns from words Let’s start at the beginning: with the words. Our choice of words can drastically alter a message, from its emotional resonance to its context to its literal meaning. Sometimes we can use word choice for good, to reinvigorate old, forgotten, or unfairly besmirched ideas. One time at a wedding bbq we labeled the coleslaw BRASSICA MIXTA so… 2016 Lisa Maria Martin lisamariamartin 2016-12-14T00:00:00+00:00 https://24ways.org/2016/information-literacy-is-a-design-problem/ content
292 292 Watch Your Language! I’m bilingual. My first language is French. I learned English in my early 20s. Learning a new language later in life meant that I was able to observe my thought processes changing over time. It made me realize that some concepts can’t be expressed in some languages, while other languages express these concepts with ease. It also helped me understand the way we label languages. English: business. French: romance. Here’s an example of how words, or the absence thereof, can affect the way we think: In French we love everything. There’s no straightforward way to say we like something, so we just end up loving everything. I love my sisters, I love broccoli, I love programming, I love my partner, I love doing laundry (this is a lie), I love my mom (this is not a lie). I love, I love, I love. It’s no wonder French is considered romantic. When I first learned English I used the word love rather than like because I hadn’t grasped the difference. Needless to say, I’ve scared away plenty of first dates! Learning another language made me realize the limitations of my native language and revealed concepts I didn’t know existed. Without the nuances a given language provides, we fail to express what we really think. The absence of words in our vocabulary gets in the way of effectively communicating and considering ideas. When I lived in Montréal, most people in my circle spoke both French and English. I could switch between them when I could more easily express an idea in one language or the other. I liked (or should I say loved?) those conversations. They were meaningful. They were efficient. I’m quadrilingual. I code in Ruby, HTML/CSS, JavaScript, Python. In the past couple of years I have been lucky enough to write code in these languages at a massive scale. In learning Ruby, much like learning English, I discovered the strengths and limitations of not only the languages I knew but the language I was learning. It taught me to choose the right tool for the job. When I started working at Shopify, making a change to a view inv… 2016 Annie-Claude Côté annieclaudecote 2016-12-10T00:00:00+00:00 https://24ways.org/2016/watch-your-language/ code
293 293 A Favor for Your Future Self We tend to think about the future when we build things. What might we want to be able to add later? How can we refactor this down the road? Will this be easy to maintain in six months, a year, two years? As best we can, we try to think about the what-ifs, and build our websites, systems, and applications with this lens. We comment our code to explain what we knew at the time and how that impacted how we built something. We add to-dos to the things we want to change. These are all great things! Whether or not we come back to those to-dos, refactor that one thing, or add new features, we put in a bit of effort up front just in case to give us a bit of safety later. I want to talk about a situation that Past Alicia and Team couldn’t even foresee or plan for. Recently, the startup I was a part of had to remove large sections of our website. Not just content, but entire pages and functionality. It wasn’t a very pleasant experience, not only for the reason why we had to remove so much of what we had built, but also because it’s the ultimate “I really hope this doesn’t break something else” situation. It was a stressful and tedious effort of triple checking that the things we were removing weren’t dependencies elsewhere. To be honest, we wouldn’t have been able to do this with any amount of success or confidence without our test suite. Writing tests for code is one of those things that developers really, really don’t want to do. It’s one of the easiest things to cut in the development process, and there’s often a struggle to have developers start writing tests in the first place. One of the best lessons the web has taught us is that we can’t, in good faith, trust the happy path. We must make sure ourselves, and our users, aren’t in a tough spot later on because we only thought of the best case scenarios. JavaScript Regardless of your opinion on whether or not everything needs to be built primarily with JavaScript, if you’re choosing to build a JavaScript heavy app, you absolutely should be writing some combination of u… 2016 Alicia Sedlock aliciasedlock 2016-12-03T00:00:00+00:00 https://24ways.org/2016/a-favor-for-your-future-self/ code
294 294 New Tricks for an Old Dog Much of my year has been spent helping new team members find their way around the expansive and complex codebase that is the TweetDeck front-end, trying to build a happy and productive group of people around a substantial codebase with many layers of legacy. I’ve loved doing this. Everything from writing new documentation, drawing diagrams, and holding technical architecture sessions teaches you something you didn’t know or exposes an area of uncertainty that you can go work on. In this article, I hope to share some experiences and techniques that will prove useful in your own situation and that you can impress your friends in some new and exciting ways! How do you do, fellow kids? To start with I’d like to introduce you to our JavaScript framework, Flight. Right now it’s used by twitter.com and TweetDeck although, as a company, Twitter is largely moving to React. Over time, as we used Flight for more complex interfaces, we found it wasn’t scaling with us. Composing components into trees was fiddly and often only applied for a specific parent-child pairing. It seems like an obvious feature with hindsight, but it didn’t come built-in to Flight, and it made reusing components a real challenge. There was no standard way to manage the state of a component; they all did it slightly differently, and the technique often varied by who was writing the code. This cost us in maintainability as you just couldn’t predict how a component would be built until you opened it. Making matters worse, Flight relied on events to move data around the application. Unfortunately, events aren’t good for giving structure to complex logic. They jump around in a way that’s hard to understand and debug, and force you to search your code for a specific string — the event name‚ to figure out what’s going on. To find fixes for these problems, we looked around at other frameworks. We like React for it’s simple, predictable state management and reactive re-render flow, and Elm for bringing strict functional programming to everyone. But when you ha… 2016 Tom Ashworth tomashworth 2016-12-18T00:00:00+00:00 https://24ways.org/2016/new-tricks-for-an-old-dog/ code
295 295 Internet of Stranger Things This year I’ve been running a workshop about using JavaScript and Node.js to work with all different kinds of electronics on the Raspberry Pi. So especially for 24 ways I’m going to show you how I made a very special Raspberry Pi based internet connected project! And nothing says Christmas quite like a set of fairy lights connected to another dimension1. What you’ll see You can rig up the fairy lights in your home, with the scrawly letters written under each one. The people from the other side (i.e. the internet) will be able to write messages to you from their browser in real time. In fact why not try it now; check this web page. When you click the lights in your browser, my lights (and yours) will turn on and off in real life! (There may be a queue if there are lots of people accessing it, hit the “Send a message” button and wait your turn.) It’s all done with JavaScript, using Node.js running on both the Raspberry Pi and on the server. I’m using WebSockets to communicate in real time between the browser, server and Raspberry Pi. What you’ll need Raspberry Pi any of the following models: Zero (will need straight male header pins soldered2 and Micro USB OTG adaptor), A+, B+, 2, or 3 Micro SD card at least 4Gb Class 10 speed3 Micro USB power supply at least 2A USB Wifi dongle (unless you have a Pi 3 - that has wifi built in). Addressable fairy lights Logic level shifter (with pins soldered unless you want to do it!) Breadboard Jumper wires (3x male to male and 4x female to male) Optional but recommended Base board to hold the Pi and Breadboard (often comes with a breadboard!) Find links for where to buy all of these items that goes along with this tutorial. The total price should be around $1004. Setting up the Raspberry Pi You’ll need to install the SD card for the Raspberry Pi. You’ll find a link to download a disk image on the support document, ready-made with the Raspbian version of Linux, along with Node.js and all the files you need. Download it and write it to the SD card using the fantastic free … 2016 Seb Lee-Delisle sebleedelisle 2016-12-01T00:00:00+00:00 https://24ways.org/2016/internet-of-stranger-things/ code
296 296 Animation in Design Systems Our modern front-end workflow has matured over time to include design systems and component libraries that help us stay organized, improve workflows, and simplify maintenance. These systems, when executed well, ensure proper documentation of the code available and enable our systems to scale with reduced communication conflicts. But while most of these systems take a critical stance on fonts, colors, and general building blocks, their treatment of animation remains disorganized and ad-hoc. Let’s leverage existing structures and workflows to reduce friction when it comes to animation and create cohesive and performant user experiences. Understand the importance of animation Part of the reason we treat animation like a second-class citizen is that we don’t really consider its power. When users are scanning a website (or any environment or photo), they are attempting to build a spatial map of their surroundings. During this process, nothing quite commands attention like something in motion. We are biologically trained to notice motion: evolutionarily speaking, our survival depends on it. For this reason, animation when done well can guide your users. It can aid and reinforce these maps, and give us a sense that we understand the UX more deeply. We retrieve information and put it back where it came from instead of something popping in and out of place. “Where did that menu go? Oh it’s in there.” For a deeper dive into how animation can connect disparate states, I wrote about the Importance of Context-Shifting in UX Patterns for CSS-Tricks. An animation flow on mobile. Animation also aids in perceived performance. Viget conducted a study where they measured user engagement with a standard loading GIF versus a custom animation. Customers were willing to wait almost twice as long for the custom loader, even though it wasn’t anything very fancy or crazy. Just by showing their users that they cared about them, they stuck around, and the bounce rates dropped. 14 second generic loading screen.22 second custom loadin… 2016 Sarah Drasner sarahdrasner 2016-12-16T00:00:00+00:00 https://24ways.org/2016/animation-in-design-systems/ code
297 297 Public Speaking with a Buddy My book Demystifying Public Speaking focuses on the variety of fears we each have about giving a talk. From presenting to a client, to leading a team standup, to standing on a conference stage, there are lots of things we can do to prepare ourselves for the spotlight and reduce those fears. Though it didn’t make it into the final draft, I wanted to highlight how helpful it can be to share that public speaking spotlight with another person, or a few more people. If you have fears about not knowing the answer to a question, fumbling your words, or making a mistake in the spotlight, then buddying up may be for you! To some, adding more people to a presentation sounds like a recipe for on-stage disaster. To others, having a friendly face nearby—a partner who can step in if you fumble—is incredibly reassuring. As design director Yesenia Perez-Cruz writes, “While public speaking is a deeply personal activity, you don’t have to go it alone. Nothing has helped my speaking career more than turning it into a group effort.” Co-presenting can level up a talk in two ways: an additional brain and presentation skill set can improve the content of the talk itself, and you may feel safer with the on-stage safety net of your buddy. For example, when I started giving lengthy workshops about building mobile device labs with my co-worker Destiny Montague, we brought different experience to the table. I was able to talk about the user experience of our lab, and the importance of testing across different screen sizes. Destiny spoke about the hardware aspects of the lab, like power consumption and networking. Our audience benefitted from the spectrum of insight we included in the talk. Moreover, Destiny and I kept each other energized and engaging while teaching our audience, having way more fun onstage. Partnering up alleviated the risk (and fear!) of fumbling; where one person makes a mistake, the other person is right there to help. Buddy presentations can be helpful if you fear saying “I don’t know” to a question, as there are oth… 2016 Lara Hogan larahogan 2016-12-06T00:00:00+00:00 https://24ways.org/2016/public-speaking-with-a-buddy/ process
298 298 First Steps in VR The web is all around us. As web folk, it is our responsibility to consider the impact our work can have. Part of this includes thinking about the future; the web changes lives and if we are building the web then we are the ones making decisions that affect people in every corner of the world. I find myself often torn between wanting to make the right decisions, and just wanting to have fun. To fiddle and play. We all know how important it is to sometimes just try ideas, whether they will amount to much or not. I think of these two mindsets as production and prototyping, though of course there are lots of overlap and phases in between. I mention this because virtual reality is currently seen as a toy for rich people, and in some ways at the moment it is. But with WebVR we are able to create interesting experiences with a relatively low entry point. I want us to have open minds, play around with things, and then see how we can use the tools we have at our disposal to make things that will help people. Every year we see articles saying it will be the “year of virtual reality”, that was especially prevalent this year. 2016 has been a year of progress, VR isn’t quite mainstream but with efforts like Playstation VR and Google Cardboard, we are definitely seeing much more of it. This year also saw the consumer editions of the Oculus Rift and HTC Vive. So it does seem to be a good time for an overview of how to get involved with creating virtual reality on the web. WebVR is an API for connecting to devices and retrieving continuous data such as the position and orientation. Unlike the Web Audio API and some other APIs, WebVR does not feel like a framework. You use it however you want, taking the data and using it as you wish. To make it easier, there are plenty of resources such as Three.js, A-Frame and ReactVR that help to make the heavy lifting a bit easier. Getting Started with A-Frame I like taking the opportunity to learn new things whenever I can. So while planning this article I thought that instead of trying to… 2016 Shane Hudson shanehudson 2016-12-11T00:00:00+00:00 https://24ways.org/2016/first-steps-in-vr/ code
299 299 What the Heck Is Inclusive Design? Naming things is hard. And I don’t just mean CSS class names and JSON properties. Finding the right term for what we do with the time we spend awake and out of bed turns out to be really hard too. I’ve variously gone by “front-end developer”, “user experience designer”, and “accessibility engineer”, all clumsy and incomplete terms for labeling what I do as an… erm… see, there’s the problem again. It’s tempting to give up entirely on trying to find the right words for things, but this risks summarily dispensing with thousands of years spent trying to qualify the world around us. So here we are again. Recently, I’ve been using the term “inclusive design” and calling myself an “inclusive designer” a lot. I’m not sure where I first heard it or who came up with it, but the terminology feels like a good fit for the kind of stuff I care to do when I’m not at a pub or asleep. This article is about what I think “inclusive design” means and why I think you might like it as an idea. Isn’t ‘inclusive design’ just ‘accessibility’ by another name? No, I don’t think so. But that’s not to say the two concepts aren’t related. Note the ‘design’ part in ‘inclusive design’ — that’s not just there by accident. Inclusive design describes a design activity; a way of designing things. This sets it apart from accessibility — or at least our expectations of what ‘accessibility’ entails. Despite every single accessibility expert I know (and I know a lot) recommending that accessibility should be integrated into design process, it is rarely ever done. Instead, it is relegated to an afterthought, limiting its effect. The term ‘accessibility’ therefore lacks the power to connote design process. It’s not that we haven’t tried to salvage the term, but it’s beginning to look like a lost cause. So maybe let’s use a new term, because new things take new names. People get that. The ‘access’ part of accessibility is also problematic. Before we get ahead of ourselves, I don’t mean access is a problem — access is good, and the more accessible somethin… 2016 Heydon Pickering heydonpickering 2016-12-07T00:00:00+00:00 https://24ways.org/2016/what-the-heck-is-inclusive-design/ process
300 300 Taking Device Orientation for a Spin When The Police sang “Don’t Stand So Close To Me” they weren’t talking about using a smartphone to view a panoramic image on Facebook, but they could have been. For years, technology has driven relentlessly towards devices we can carry around in our pockets, and now that we’re there, we’re expected to take the thing out of our pocket and wave it around in front of our faces like a psychotic donkey in search of its own dangly carrot. But if you can’t beat them, join them. A brave new world A couple of years back all sorts of specs for new HTML5 APIs sprang up much to our collective glee. Emboldened, we ran a few tests and found they basically didn’t work in anything and went off disheartened into the corner for a bit of a sob. Turns out, while we were all busy boohooing, those browser boffins have actually being doing some work, and lo and behold, some of these APIs are even half usable. Mostly literally half usable—we’re still talking about browsers, after all. Now, of course they’re all a bit JavaScripty and are going to involve complex methods and maths and science and probably about a thousand dependancies from Github that will fall out of fashion while we’re still trying to locate the documentation, right? Well, no! So what if we actually wanted to use one of these APIs, say to impress our friends with our ability to make them wave their phones in front of their faces (because no one enjoys looking hapless more than the easily-technologically-impressed), how could we do something like that? Let’s find out. The Device Orientation API The phone-wavy API is more formally known as the DeviceOrientation Event Specification. It does a bunch of stuff that basically doesn’t work, but also gives us three values that represent orientation of a device (a phone, a tablet, probably not a desktop computer) around its x, y and z axes. You might think of it as pitch, roll and yaw if you like to spend your weekends wearing goggles and a leather hat. The main way we access these values is through an event listener, which can … 2016 Drew McLellan drewmclellan 2016-12-24T00:00:00+00:00 https://24ways.org/2016/taking-device-orientation-for-a-spin/ code
301 301 Stretching Time Time is valuable. It’s a precious commodity that, if we’re not too careful, can slip effortlessly through our fingers. When we think about the resources at our disposal we’re often guilty of forgetting the most valuable resource we have to hand: time. We are all given an allocation of time from the time bank. 86,400 seconds a day to be precise, not a second more, not a second less. It doesn’t matter if we’re rich or we’re poor, no one can buy more time (and no one can save it). We are all, in this regard, equals. We all have the same opportunity to spend our time and use it to maximum effect. As such, we need to use our time wisely. I believe we can ‘stretch’ time, ensuring we make the most of every second and maximising the opportunities that time affords us. Through a combination of ‘Structured Procrastination’ and ‘Focused Finishing’ we can open our eyes to all of the opportunities in the world around us, whilst ensuring that we deliver our best work precisely when it’s required. A win win, I’m sure you’ll agree. Structured Procrastination I’m a terrible procrastinator. I used to think that was a curse – “Why didn’t I just get started earlier?” – over time, however, I’ve started to see procrastination as a valuable tool if it is used in a structured manner. Don Norman refers to procrastination as ‘late binding’ (a term I’ve happily hijacked). As he argues, in Why Procrastination Is Good, late binding (delay, or procrastination) offers many benefits: Delaying decisions until the time for action is beneficial… it provides the maximum amount of time to think, plan, and determine alternatives. We live in a world that is constantly changing and evolving, as such the best time to execute is often ‘just in time’. By delaying decisions until the last possible moment we can arrive at solutions that address the current reality more effectively, resulting in better outcomes. Procrastination isn’t just useful from a project management perspective, however. It can also be useful for allowing your mind the space to wande… 2016 Christopher Murphy christophermurphy 2016-12-21T00:00:00+00:00 https://24ways.org/2016/stretching-time/ process
302 302 Flexible Project Management in Inflexible Environments Handling unforeseen circumstances is an inevitable part of any project. It’s also often the most uncomfortable, and there is no amount of skill or planning that will fully eradicate the need to adapt to change. The ability to be flexible, responsive, and unafraid of facing not only problems, but also potentially positive scope changes and new ideas, isn’t an easy one to master. I am by no means saying that I have, but what I have learned is that there is often the temptation to shut out anything that might derail your plan, even sometimes at the cost of the quality you’re committed to. The reality is that as someone leading a project you know there will be challenges, but, in general, it’s a hassle to try keep the landscape open. Problems are bridges we should cross when we come to them, but intentional changes to the plan, and adapting for the sake of improving your first idea, is harder. There are tight schedules, resource is planned miles ahead, and you’re already juggling twenty other things. If you’re passionate about the quality of work you deliver and are working somewhere that considers itself expert within the field of digital, then having an attitude of flexibility is extremely important. It’s important when you’re overcoming a challenge or problem, but it’s also important for allowing ideas to evolve and be refined as much as they can be throughout the course of a project. Where theory falls short The premise of any Agile methodology, Scrum for example, is based around being able to work efficiently, react quickly and deliver relevant chunks of a product in manageable increments. It’s often hailed as king of flexible management and it can work really well, especially for in-house software products developed over a long or even an indefinite period of time. It holds off defining scope too far ahead and lets teams focus on smaller amounts of work, and allows them to regularly reprioritise. Unfortunately though, not all environments lend themselves as easily to a fully Agile setup. Even the ones that do m… 2016 Gillian Sibthorpe gilliansibthorpe 2016-12-04T00:00:00+00:00 https://24ways.org/2016/flexible-project-management/ process
303 303 We Need to Talk About Technical Debt In my work with clients, a lot of time is spent assessing old, legacy, sprawling systems and identifying good code, bad code, and technical debt. One thing that constantly strikes me is the frequency with which bad code and technical debt are conflated, so let me start by saying this: Not all technical debt is bad code, and not all bad code is technical debt. Sometimes your bad code is just that: bad code. Calling it technical debt often feels like a more forgiving and friendly way of referring to what may have just been a poor implementation or a substandard piece of work. It is an oft-misunderstood phrase, and when mistaken for meaning ‘anything legacy or old hacky or nasty or bad’, technical debt is swept under the carpet along with all of the other parts of the codebase we’d rather not talk about, and therein lies the problem. We need to talk about technical debt. What We Talk About When We Talk About Technical Debt The thing that separates technical debt from the rest of the hacky code in our project is the fact that technical debt, by definition, is something that we knowingly and strategically entered into. Debt doesn’t happen by accident: debt happens when we choose to gain something otherwise-unattainable immediately in return for paying it back (with interest) later on. An Example You’re a front-end developer working on a SaaS product, and your sales team is courting a large customer – a customer so large that you can’t really afford to lose them. The customer tells you that as long as you can allow them to theme your SaaS application according to their branding, they are willing to sign on the dotted line… the problem being that your CSS architecture was never designed to incorporate theming at all, and there isn’t currently a nice, clean way to incorporate a theme into the codebase. You and the business make the decision that you will hack a theme into the product in two days. It’s going to be messy, it’s going to be ugly, but you can’t afford to lose a huge customer just because your CSS isn’t quite … 2016 Harry Roberts harryroberts 2016-12-05T00:00:00+00:00 https://24ways.org/2016/we-need-to-talk-about-technical-debt/ code
304 304 Five Lessons From My First 18 Months as a Dev I recently moved from Sydney to London to start a dream job with Twitter as a software engineer. A software engineer! Who would have thought. Having started my career as a journalist, the title ‘engineer’ is very strange to me. The notion of writing in first person is also very strange. Journalists are taught to be objective, invisible, to keep yourself out of the story. And here I am writing about myself on a public platform. Cringe. Since I started learning to code I’ve often felt compelled to write about my experience. I want to share my excitement and struggles with the world! But as a junior I’ve been held back by thoughts like ‘whatever you have to say won’t be technical enough’, ‘any time spent writing a blog would be better spent writing code’, ‘blogging is narcissistic’, etc.  Well, I’ve been told that your thirties are the years where you stop caring so much about what other people think. And I’m almost 30. So here goes! These are five key lessons from my first year and a half in tech: Deployments should delight, not dread Lesson #1: Making your deployment process as simple as possible is worth the investment. In my first dev job, I dreaded deployments. We would deploy every Sunday night at 8pm. Preparation would begin the Friday before. A nominated deployment manager would spend half a day tagging master, generating scripts, writing documentation and raising JIRAs. The only fun part was choosing a train gif to post in HipChat: ‘All aboard! The deployment train leaves in 3, 2, 1…” When Sunday night came around, at least one person from every squad would need to be online to conduct smoke tests. Most times, the deployments would succeed. Other times they would fail. Regardless, deployments ate into people’s weekend time — and they were intense. Devs would rush to have their code approved before the Friday cutoff. Deployment managers who were new to the process would fear making a mistake.  The team knew deployments were a problem. They were constantly striving to improve them. And what I’ve learnt fr… 2016 Amy Simmons amysimmons 2016-12-20T00:00:00+00:00 https://24ways.org/2016/my-first-18-months-as-a-dev/ process
305 305 CSS Writing Modes Since you may not have a lot of time, I’m going to start at the end, with the dessert. You can use a little-known, yet important and powerful CSS property to make text run vertically. Like this. Or instead of running text vertically, you can layout a set of icons or interface buttons in this way. Or, of course, with anything on your page. The CSS I’ve applied makes the browser rethink the orientation of the world, and flow the layout of this element at a 90° angle to “normal”. Check out the live demo, highlight the headline, and see how the cursor is now sideways. See the Pen Writing Mode Demo — Headline by Jen Simmons (@jensimmons) on CodePen. The code for accomplishing this is pretty simple. h1 { writing-mode: vertical-rl; } That’s all it takes to switch the writing mode from the web’s default horizontal top-to-bottom mode to a vertical right-to-left mode. If you apply such code to the html element, the entire page is switched, affecting the scroll direction, too. In my example above, I’m telling the browser that only the h1 will be in this vertical-rl mode, while the rest of my page stays in the default of horizontal-tb. So now the dessert course is over. Let me serve up this whole meal, and explain the the CSS Writing Mode Specification. Why learn about writing modes? There are three reasons I’m teaching writing modes to everyone—including western audiences—and explaining the whole system, instead of quickly showing you a simple trick. We live in a big, diverse world, and learning about other languages is fascinating. Many of you lay out pages in languages like Chinese, Japanese and Korean. Or you might be inspired to in the future. Using writing-mode to turn bits sideways is cool. This CSS can be used in all kinds of creative ways, even if you are working only in English. Most importantly, I’ve found understanding Writing Modes incredibly helpful when understanding Flexbox and CSS Grid. Before I learned Writing Mode, I felt like there was still a big hole in my knowledge, something I just didn’… 2016 Jen Simmons jensimmons 2016-12-23T00:00:00+00:00 https://24ways.org/2016/css-writing-modes/ code
306 306 What next for CSS Grid Layout? In 2012 I wrote an article for 24 ways detailing a new CSS Specification that had caught my eye, at the time with an implementation only in Internet Explorer. What I didn’t realise at the time was that CSS Grid Layout was to become a theme on which I would base the next four years of research, experimentation, writing and speaking. As I write this article in December 2016, we are looking forward to CSS Grid Layout being shipped in Chrome and Firefox. What will ship early next year in those browsers is expanded and improved from the early implementation I explored in 2012. Over the last four years the spec has been developed as part of the CSS Working Group process, and has had input from browser engineers, specification writers and web developers. Use cases have been discussed, and features added. The CSS Grid Layout specification is now a Candidate Recommendation. This status means the spec is to all intents and purposes, finished. The discussions now happening are on fine implementation details, and not new feature ideas. It makes sense to draw a line under a specification in order that browser vendors can ship complete, interoperable implementations. That approach is good for all of us, it makes development far easier if we know that a browser supports all of the features of a specification, rather than working out which bits are supported. However it doesn’t mean that works stops here, and that new use cases and features can’t be proposed for future levels of Grid Layout. Therefore, in this article I’m going to take a look at some of the things I think grid layout could do in the future. I would love for these thoughts to prompt you to think about how Grid - or any CSS specification - could better suit the use cases you have. Subgrid - the missing feature of Level 1 The implementation of CSS Grid Layout in Chrome, Firefox and Webkit is comparable and very feature complete. There is however one standout feature that has not been implemented in any browser as yet - subgrid. Once you set the value of the displa… 2016 Rachel Andrew rachelandrew 2016-12-12T00:00:00+00:00 https://24ways.org/2016/what-next-for-css-grid-layout/ code
307 307 Get the Balance Right: Responsive Display Text Last year in 24 ways I urged you to Get Expressive with Your Typography. I made the case for grabbing your readers’ attention by setting text at display sizes, that is to say big. You should consider very large text in the same way you might a hero image: a picture that creates an atmosphere and anchors your layout. When setting text to be read, it is best practice to choose body and subheading sizes from a pre-defined scale appropriate to the viewport dimensions. We set those sizes using rems, locking the text sizes together so they all scale according to the page default and your reader’s preferences. You can take the same approach with display text by choosing larger sizes from the same scale. However, display text, as defined by its purpose and relative size, is text to be seen first, and read second. In other words a picture of text. When it comes to pictures, you are likely to scale all scene-setting imagery - cover photos, hero images, and so on - relative to the viewport. Take the same approach with display text: lock the size and shape of the text to the screen or browser window. Introducing viewport units With CSS3 came a new set of units which are locked to the viewport. You can use these viewport units wherever you might otherwise use any other unit of length such as pixels, ems or percentage. There are four viewport units, and in each case a value of 1 is equal to 1% of either the viewport width or height as reported in reference1 pixels: vw - viewport width, vh - viewport height, vmin - viewport height or width, whichever is smaller vmax - viewport height or width, whichever is larger In one fell swoop you can set the size of a display heading to be proportional to the screen or browser width, rather than choosing from a scale in a series of media queries. The following makes the heading font size 13% of the viewport width: h1 { font-size: 13 vw; } So for a selection of widths, the rendered font size would be: Rendered font size (px) Viewport width 13 vw 320 42 768 100 1024 133 1280 166 1920 … 2016 Richard Rutter richardrutter 2016-12-09T00:00:00+00:00 https://24ways.org/2016/responsive-display-text/ code
308 308 How to Make a Chrome Extension to Delight (or Troll) Your Friends If you’re like me, you grew up drawing mustaches on celebrities. Every photograph was subject to your doodling wrath, and your brilliance was taken to a whole new level with computer programs like Microsoft Paint. The advent of digital cameras meant that no one was safe from your handiwork, especially not your friends. And when you finally got your hands on Photoshop, you spent hours maniacally giggling at your artistic genius. But today is different. You’re a serious adult with important things to do and a reputation to uphold. You keep up with modern web techniques and trends, and have little time for fun other than a random Giphy on Slack… right? Nope. If there’s one thing 2016 has taught me, it’s that we—the self-serious, world-changing tech movers and shakers of the universe—haven’t changed one bit from our younger, more delightable selves. How do I know? This year I created a Chrome extension called Tabby Cat and watched hundreds of thousands of people ditch productivity for randomly generated cats. Tabby Cat replaces your new tab page with an SVG cat featuring a silly name like “Stinky Dinosaur” or “Tiny Potato”. Over time, the cats collect goodies that vary in absurdity from fishbones to lawn flamingos to Raybans. Kids and adults alike use this extension, and analytics show the majority of use happens Monday through Friday from 9-5. The popularity of Tabby Cat has convinced me there’s still plenty of room in our big, grown-up hearts for fun. Today, we’re going to combine the formula behind Tabby Cat with your intrinsic desire to delight (or troll) your friends, and create a web app that generates your friends with random objects and environments of your choosing. You can publish it as a Chrome extension to replace your new tab, or simply host it as a website and point to it with the New Tab Redirect extension. Here’s a sneak peek at my final result featuring my partner, my cat, and I in cheerfully weird accessories. Your result will look however you want it to. Along the way, we’ll cover how to bui… 2016 Leslie Zacharkow lesliezacharkow 2016-12-08T00:00:00+00:00 https://24ways.org/2016/how-to-make-a-chrome-extension/ code
309 309 HTTP/2 Server Push and Service Workers: The Perfect Partnership Being a web developer today is exciting! The web has come a long way since its early days and there are so many great technologies that enable us to build faster, better experiences for our users. One of these technologies is HTTP/2 which has a killer feature known as HTTP/2 Server Push. During this year’s Chrome Developer Summit, I watched a really informative talk by Sam Saccone, a Software Engineer on the Google Chrome team. He gave a talk entitled Planning for Performance, and one of the topics that he covered immediately piqued my interest; the idea that HTTP/2 Server Push and Service Workers were the perfect web performance combination. If you’ve never heard of HTTP/2 Server Push before, fear not - it’s not as scary as it sounds. HTTP/2 Server Push simply allows the server to send data to the browser without having to wait for the browser to explicitly request it first. In this article, I am going to run through the basics of HTTP/2 Server Push and show you how, when combined with Service Workers, you can deliver the ultimate in web performance to your users. What is HTTP/2 Server Push? When a user navigates to a URL, a browser will make an HTTP request for the underlying web page. The browser will then scan the contents of the HTML document for any assets that it may need to retrieve such as CSS, JavaScript or images. Once it finds any assets that it needs, it will then make multiple HTTP requests for each resource that it needs and begin downloading one by one. While this approach works well, the problem is that each HTTP request means more round trips to the server before any data arrives at the browser. These extra round trips take time and can make your web pages load slower. Before we go any further, let’s see what this might look like when your browser makes a request for a web page. If you were to view this in the developer tools of your browser, it might look a little something like this: As you can see from the image above, once the HTML file has been downloaded and parsed, the browser then mak… 2016 Dean Hume deanhume 2016-12-15T00:00:00+00:00 https://24ways.org/2016/http2-server-push-and-service-workers/ code
310 310 Fairytale of new Promise There are only four good Christmas songs. I know, yeah, JavaScript or whatever. We’ll get to that in a minute, I promise. First—and I cannot stress this enough— there are four good Christmas songs. You’re free to disagree with me here, of course, but please try to understand that you will be wrong. They don’t all have the most safe-for-work titles; I can’t list all of them here, but if you choose to let your fingers do the walkin’ to your nearest search engine, I will say that one was released by the band FEAR way back in 1982 and one was on Run the Jewels’ self-titled debut album. The lyrics are a hell of a lot worse than the titles, so maybe wait until you get home from work before you queue them up. Wear headphones, if you’ve got thin walls. For my money, though, the two I can reference by name are the top of that small heap: Tom Waits’ Christmas Card from a Hooker in Minneapolis, and The Pogues’ Fairytale of New York. The former once held the honor of being the only good Christmas song—about which which I was also unequivocally correct, right up until I changed my mind. It’s not the song up for discussion today, but feel free to familiarize yourself just the same—I’ll wait. Fairytale of New York—the top of the list—starts out by hinting at some pretty standard holiday fare; dreams and cheer and whatnot. Typical seasonal stuff, so long as you ignore that the story seems to be recounted as a drunken flashback in a jail cell. You can probably make a few guesses at the underlying spirit of the song based on that framing: following a lucky break, our bright-eyed protagonists move to New York in search of fame and fortune, only to quickly descend into bad decisions, name-calling, and vaguely festive chaos. This song speaks to me on a couple of levels, not the least of which is as a retelling of my day-to-day interactions with JavaScript. Each day’s melody might vary a little bit, granted, but the lyrics almost always follow a pretty clear arc toward “PARENTAL ADVISORY: EXPLICIT CONTENT.” You might have heard a simi… 2016 Mat Marquis matmarquis 2016-12-19T00:00:00+00:00 https://24ways.org/2016/fairytale-of-new-promise/ code
311 311 Designing Imaginative Style Guides (Living) style guides and (atomic) patterns libraries are “all the rage,” as my dear old Nana would’ve said. If articles and conference talks are to be believed, making and using them has become incredibly popular. I think there are plenty of ways we can improve how style guides look and make them better at communicating design information to creatives without it getting in the way of information that technical people need. Guides to libraries of patterns Most of my consulting work and a good deal of my creative projects now involve designing style guides. I’ve amassed a huge collection of brand guidelines and identity manuals as well as, more recently, guides to libraries of patterns intended to help designers and developers make digital products and websites. Two pages from one of my Purposeful style guide packs. Designs © Stuff & Nonsense. “Style guide” is an umbrella term for several types of design documentation. Sometimes we’re referring to static style or visual identity guides, other times voice and tone. We might mean front-end code guidelines or component/pattern libraries. These all offer something different but more often than not they have something in common. They look ugly enough to have been designed by someone who enjoys configuring a router. OK, that was mean, not everyone’s going to think an unimaginative style guide design is a problem. After all, as long as a style guide contains information people need, how it looks shouldn’t matter, should it? Inspiring not encyclopaedic Well here’s the thing. Not everyone needs to take the same information away from a style guide. If you’re looking for markup and styles to code a ‘media’ component, you’re probably going to be the technical type, whereas if you need to understand the balance of sizes across a typographic hierarchy, you’re more likely to be a creative. What you need from a style guide is different. Sure, some people1 need rules: “Do this (responsive pattern)” or “don’t do that (auto-playing video.)” Those people probably also want facts: … 2016 Andy Clarke andyclarke 2016-12-13T00:00:00+00:00 https://24ways.org/2016/designing-imaginative-style-guides/ design
312 312 Preparing to Be Badass Next Year Once we’ve eaten our way through the holiday season, people will start to think about new year’s resolutions. We tend to focus on things that we want to change… and often things that we don’t like about ourselves to “fix”. We set rules for ourselves, or try to start new habits or stop bad ones. We focus in on things we will or won’t do. For many of us the list of things we “ought” to be spending time on is just plain overwhelming – family, charity/community, career, money, health, relationships, personal development. It’s kinda scary even just listing it out, isn’t it? I want to encourage you to think differently about next year. The ever-brilliant Kathy Sierra articulates a better approach really well when talking about the attitude we should have to building great products. She tells us to think not about what the user will do with our product, but about what they are trying to achieve in the real world and how our product helps them to be badass1. When we help the user be badass, then we are really making a difference. I suppose this is one way of saying: focus not on what you will do, focus on what it will help you achieve. How will it help you be awesome? In what ways do you want to be more badass next year? A professional lens Though of course you might want to focus in on health or family or charity or community or another area next year, many people will want to become more badass in their chosen career. So let’s talk about a scaffold to help you figure out your professional / career development next year. First up, an assumption: everyone wants to be awesome. Nobody gets up in the morning aiming to be crap at their job. Nobody thinks to themselves “Today I am aiming for just south of mediocre, and if I can mess up everybody else’s ability to do good work then that will be just perfect2”. Ergo, you want to be awesome. So what does awesome look like? Danger! The big trap that people fall into when think about their professional development is to immediately focus on the things that they aren’t good … 2016 Meri Williams meriwilliams 2016-12-22T00:00:00+00:00 https://24ways.org/2016/preparing-to-be-badass-next-year/ business
49 49 Universal React One of the libraries to receive a huge amount of focus in 2015 has been ReactJS, a library created by Facebook for building user interfaces and web applications. More generally we’ve seen an even greater rise in the number of applications built primarily on the client side with most of the logic implemented in JavaScript. One of the main issues with building an app in this way is that you immediately forgo any customers who might browse with JavaScript turned off, and you can also miss out on any robots that might visit your site to crawl it (such as Google’s search bots). Additionally, we gain a performance improvement by being able to render from the server rather than having to wait for all the JavaScript to be loaded and executed. The good news is that this problem has been recognised and it is possible to build a fully featured client-side application that can be rendered on the server. The way in which these apps work is as follows: The user visits www.yoursite.com and the server executes your JavaScript to generate the HTML it needs to render the page. In the background, the client-side JavaScript is executed and takes over the duty of rendering the page. The next time a user clicks, rather than being sent to the server, the client-side app is in control. If the user doesn’t have JavaScript enabled, each click on a link goes to the server and they get the server-rendered content again. This means you can still provide a very quick and snappy experience for JavaScript users without having to abandon your non-JS users. We achieve this by writing JavaScript that can be executed on the server or on the client (you might have heard this referred to as isomorphic) and using a JavaScript framework that’s clever enough handle server- or client-side execution. Currently, ReactJS is leading the way here, although Ember and Angular are both working on solutions to this problem. It’s worth noting that this tutorial assumes some familiarity with React in general, its syntax and concepts. If you’d like a refresher, th… 2015 Jack Franklin jackfranklin 2015-12-05T00:00:00+00:00 https://24ways.org/2015/universal-react/ code
50 50 Make a Comic For something slightly different over Christmas, why not step away from your computer and make a comic? Definitely not the author working on a comic in the studio, with the desk displaying some of the things you need to make a comic on paper. Why make a comic? First of all, it’s truly fun and it’s not that difficult. If you’re a designer, you can use skills you already have, so why not take some time to indulge your aesthetic whims and make something for yourself, rather than for a client or your company. And you can use a computer – or not. If you’re an interaction designer, it’s likely you’ve already made a storyboard or flow, or designed some characters for personas. This is a wee jump away from that, to the realm of storytelling and navigating human emotions through characters who may or may not be human. Similar medium and skills, different content. It’s not a client deliverable but something that stands by itself, and you’ve nobody’s criteria to meet except those that exist in your imagination! Thanks to your brain and the alchemy of comics, you can put nearly anything in a sequence and your brain will find a way to make sense of it. Scott McCloud wrote about the non sequitur in comics: “There is a kind of alchemy at work in the space between panels which can help us find meaning or resonance in even the most jarring of combinations.” Here’s an example of a non sequitur from Scott McCloud’s Understanding Comics – the images bear no relation to one another, but since they’re in a sequence our brains do their best to understand it: Once you know this it takes the pressure off somewhat. It’s a fun thing to keep in mind and experiment with in your comics! Materials needed A4 copy/printing paper HB pencil for light drawing Dip pen and waterproof Indian ink Bristol board (or any good quality card with a smooth, durable surface) Step 1: Get ideas You’d be surprised where you can take a small grain of an idea and develop it into an interesting comic. Think about a funny conversation you had, or any i… 2015 Rebecca Cottrell rebeccacottrell 2015-12-20T00:00:00+00:00 https://24ways.org/2015/make-a-comic/ design
51 51 Blow Your Own Trumpet Even if your own trumpet’s tiny and fell out of a Christmas cracker, blowing it isn’t something that everyone’s good at. Some people find selling themselves and what they do difficult. But, you know what? Boo hoo hoo. If you want people to buy something, the reality is you’d better get good at selling, especially if that something is you. For web professionals, the best place to tell potential business customers or possible employers about what you do is on your own website. You can write what you want and how you want, but that doesn’t make knowing what to write any easier. As a matter of fact, writing for yourself often proves harder than writing for someone else. I spent this autumn thinking about what I wanted to say about Stuff & Nonsense on the website we relaunched recently. While I did that, I spoke to other designers about how they struggled to write about their businesses. If you struggle to write well, don’t worry. You’re not on your own. Here are five ways to hit the right notes when writing about yourself and your work. Be genuine about who you are I’ve known plenty of talented people who run a successful business pretty much single-handed. Somehow they still feel awkward presenting themselves as individuals. They wonder whether describing themselves as a company will give them extra credibility. They especially agonise over using “we” rather than “I” when describing what they do. These choices get harder when you’re a one-man band trading as a limited company or LLC business entity. If you mainly work alone, don’t describe yourself as anything other than “I”. You might think that saying “we” makes you appear larger and will give you a better chance of landing bigger and better work, but the moment a prospective client asks, “How many people are you?” you’ll have some uncomfortable explaining to do. This will distract them from talking about your work and derail your sales process. There’s no need to be anything other than genuine about how you describe yourself. You should be proud to say “I” becau… 2015 Andy Clarke andyclarke 2015-12-23T00:00:00+00:00 https://24ways.org/2015/blow-your-own-trumpet/ business
52 52 Git Rebasing: An Elfin Workshop Workflow This year Santa’s helpers have been tasked with making a garland. It’s a pretty simple task: string beads onto yarn in a specific order. When the garland reaches a specific length, add it to the main workshop garland. Each elf has a specific sequence they’re supposed to chain, which is given to them via a work order. (This is starting to sound like one of those horrible calculus problems. I promise it isn’t. It’s worse; it’s about Git.) For the most part, the system works really well. The elves are able to quickly build up a shared chain because each elf specialises on their own bit of garland, and then links the garland together. Because of this they’re able to work independently, but towards the common goal of making a beautiful garland. At first the elves are really careful with each bead they put onto the garland. They check with one another before merging their work, and review each new link carefully. As time crunches on, the elves pour a little more cheer into the eggnog cooler, and the quality of work starts to degrade. Tensions rise as mistakes are made and unkind words are said. The elves quickly realise they’re going to need a system to change the beads out when mistakes are made in the chain. The first common mistake is not looking to see what the latest chain is that’s been added to the main garland. The garland is huge, and it sits on a roll in one of the corners of the workshop. It’s a big workshop, so it is incredibly impractical to walk all the way to the roll to check what the last link is on the chain. The elves, being magical, have set up a monitoring system that allows them to keep a local copy of the main garland at their workstation. It’s an imperfect system though, so the elves have to request a manual refresh to see the latest copy. They can request a new copy by running the command git pull --rebase=preserve (They found that if they ran git pull on its own, they ended up with weird loops of extra beads off the main garland, so they’ve opted to use this method.) This keeps the shared garl… 2015 Emma Jane Westby emmajanewestby 2015-12-07T00:00:00+00:00 https://24ways.org/2015/git-rebasing/ code
53 53 Get Expressive with Your Typography In 1955 Beatrice Warde, an American communicator on typography, published a series of essays entitled The Crystal Goblet in which she wrote, “People who love ideas must have a love of words. They will take a vivid interest in the clothes that words wear.” And with that proposition Warde introduced the idea that just as we judge someone based on the clothes they are wearing, so we make judgements about text based on the typefaces in which it is set. Beatrice Warde. ©1970 Monotype Imaging Inc. Choosing the same typeface as everyone else, especially if you’re trying to make a statement, is like turning up to a party in the same dress; to a meeting in the same suit, shirt and tie; or to a craft ale dispensary in the same plaid shirt and turned-up skinny jeans. But there’s more to your choice of typeface than simply making an impression. In 2012 Jon Tan wrote on 24 ways about a scientific study called “The Aesthetics of Reading” which concluded that “good quality typography is responsible for greater engagement during reading and thus induces a good mood.” Furthermore, at this year’s Ampersand conference Sarah Hyndman, an expert in multisensory typography, discussed how typefaces can communicate with our subconscious. Sarah showed that different fonts could have an effect on how food tasted. A rounded font placed near a bowl of jellybeans would make them taste sweeter, and a jagged angular font would make them taste more sour. The quality of your typography can therefore affect the mood of your reader, and your font choice directly affect the senses. This means you can manipulate the way people feel. You can change their emotional state through type alone. Now that’s a real superpower! The effects of your body text design choices are measurable but subtle. If you really want to have an impact you need to think big. Literally. Display text and headings are your attention grabbers. They are your chance to interrupt, introduce and seduce. Display text and headings set the scene and draw people in. Text set large creates… 2015 Richard Rutter richardrutter 2015-12-04T00:00:00+00:00 https://24ways.org/2015/get-expressive-with-your-typography/ design
54 54 Putting My Patterns through Their Paces Over the last few years, the conversation around responsive design has shifted subtly, focusing not on designing pages, but on patterns: understanding the small, reusable elements that comprise a larger design system. And given that many of those patterns are themselves responsive, learning to manage these small layout systems has become a big part of my work. The thing is, the more pattern-driven work I do, the more I realize my design process has changed in a number of subtle, important ways. I suppose you might even say that pattern-driven design has, in a few ways, redesigned me. Meet the Teaser Here’s a recent example. A few months ago, some friends and I redesigned The Toast. (It was a really, really fun project, and we learned a lot.) Each page of the site is, as you might guess, stitched together from a host of tiny, reusable patterns. Some of them, like the search form and footer, are fairly unique, and used once per page; others are used more liberally, and built for reuse. The most prevalent example of these more generic patterns is the teaser, which is classed as, uh, .teaser. (Look, I never said I was especially clever.) In its simplest form, a teaser contains a headline, which links to an article: Fairly straightforward, sure. But it’s just the foundation: from there, teasers can have a byline, a description, a thumbnail, and a comment count. In other words, we have a basic building block (.teaser) that contains a few discrete content types – some required, some not. In fact, very few of those pieces need to be present; to qualify as a teaser, all we really need is a link and a headline. But by adding more elements, we can build slight variations of our teaser, and make it much, much more versatile. Nearly every element visible on this page is built out of our generic “teaser” pattern. But the teaser variation I’d like to call out is the one that appears on The Toast’s homepage, on search results or on section fronts. In the main content area, each teaser in the list features larger i… 2015 Ethan Marcotte ethanmarcotte 2015-12-10T00:00:00+00:00 https://24ways.org/2015/putting-my-patterns-through-their-paces/ code
55 55 How Tabs Should Work Tabs in browsers (not browser tabs) are one of the oldest custom UI elements in a browser that I can think of. They’ve been done to death. But, sadly, most of the time I come across them, the tabs have been badly, or rather partially, implemented. So this post is my definition of how a tabbing system should work, and one approach of implementing that. But… tabs are easy, right? I’ve been writing code for tabbing systems in JavaScript for coming up on a decade, and at one point I was pretty proud of how small I could make the JavaScript for the tabbing system: var tabs = $('.tab').click(function () { tabs.hide().filter(this.hash).show(); }).map(function () { return $(this.hash)[0]; }); $('.tab:first').click(); Simple, right? Nearly fits in a tweet (ignoring the whole jQuery library…). Still, it’s riddled with problems that make it a far from perfect solution. Requirements: what makes the perfect tab? All content is navigable and available without JavaScript (crawler-compatible and low JS-compatible). ARIA roles. The tabs are anchor links that: are clickable have block layout have their href pointing to the id of the panel element use the correct cursor (i.e. cursor: pointer). Since tabs are clickable, the user can open in a new tab/window and the page correctly loads with the correct tab open. Right-clicking (and Shift-clicking) doesn’t cause the tab to be selected. Native browser Back/Forward button correctly changes the state of the selected tab (think about it working exactly as if there were no JavaScript in place). The first three points are all to do with the semantics of the markup and how the markup has been styled. I think it’s easy to do a good job by thinking of tabs as links, and not as some part of an application. Links are navigable, and they should work the same way other links on the page work. The last three points are JavaScript problems. Let’s investigate that. The shitmus test Like a litmus test, here’s a couple of quick ways you can tell if a tabbing system is poorly implemented: Cha… 2015 Remy Sharp remysharp 2015-12-22T00:00:00+00:00 https://24ways.org/2015/how-tabs-should-work/ code
56 56 Helping VIPs Care About Performance Making a site feel super fast is the easy part of performance work. Getting people around you to care about site speed is a much bigger challenge. How do we keep the site fast beyond the initial performance work? Keeping very important people like your upper management or clients invested in performance work is critical to keeping a site fast and empowering other designers and developers to contribute. The work to get others to care is so meaty that I dedicated a whole chapter to the topic in my book Designing for Performance. When I speak at conferences, the majority of questions during Q&A are on this topic. When I speak to developers and designers who care about performance, getting other people at one’s organization or agency to care becomes the most pressing question. My primary response to folks who raise this issue is the question: “What metric(s) do your VIPs care about?” This is often met with blank stares and raised eyebrows. But it’s also our biggest clue to what we need to do to help empower others to care about performance and work on it. Every organization and executive is different. This means that three major things vary: the primary metrics VIPs care about; the language they use about measuring success; and how change is enacted. By clueing in to these nuances within your organization, you can get a huge leg up on crafting a successful pitch about performance work. Let’s start with the metric that we should measure. Sure, (most) everybody cares about money - but is that really the metric that your VIPs are looking at each day to measure the success or efficacy of your site? More likely, dollars are the end game, but the metrics or key performance indicators (KPIs) people focus on might be: rate of new accounts created/signups cost of acquiring or retaining a customer visitor return rate visitor bounce rate favoriting or another interaction rate These are just a few examples, but they illustrate how wide-ranging the options are that people care about. I find that developers and designers haven’t… 2015 Lara Hogan larahogan 2015-12-08T00:00:00+00:00 https://24ways.org/2015/helping-vips-care-about-performance/ business
57 57 Cooking Up Effective Technical Writing Merry Christmas! May your preparations for this festive season of gluttony be shaping up beautifully. By the time you read this I hope you will have ordered your turkey, eaten twice your weight in Roses/Quality Street (let’s not get into that argument), and your Christmas cake has been baked and is now quietly absorbing regular doses of alcohol. Some of you may be reading this and scoffing Of course! I’ve also made three batches of mince pies, a seasonal chutney and enough gingerbread men to feed the whole street! while others may be laughing Bake? Oh no, I can’t cook to save my life. For beginners, recipes are the step-by-step instructions that hand-hold us through the cooking process, but even as a seasoned expert you’re likely to refer to a recipe at some point. Recipes tell us what we need, what to do with it, in what order, and what the outcome will be. It’s the documentation behind our ideas, and allows us to take the blueprint for a tasty morsel and to share it with others so they can recreate it. In fact, this is a little like the open source documentation and tutorials that we put out there, similarly aiming to guide other developers through our creations. The ‘just’ification of documentation Lately it feels like we’re starting to consider the importance of our words, and the impact they can have on others. Brad Frost warned us of the dangers of “Just” when it comes to offering up solutions to queries: “Just use this software/platform/toolkit/methodology…” “Just” makes me feel like an idiot. “Just” presumes I come from a specific background, studied certain courses in university, am fluent in certain technologies, and have read all the right books, articles, and resources. “Just” is a dangerous word. “Just” by Brad Frost I can really empathise with these sentiments. My relationship with code started out as many good web tales do, with good old HTML, CSS and JavaScript. University years involved some time with Perl, PHP, Java and C. In my first job I worked primarily with ColdFusion, a bit of ActionScri… 2015 Sally Jenkinson sallyjenkinson 2015-12-18T00:00:00+00:00 https://24ways.org/2015/cooking-up-effective-technical-writing/ content
58 58 Beyond the Style Guide Much like baking a Christmas cake, designing for the web involves creating an experience in layers. Starting with a solid base that provides the core experience (the fruit cake), we can add further layers, each adding refinement (the marzipan) and delight (the icing). Don’t worry, this isn’t a misplaced cake recipe, but an evaluation of modular design and the role style guides can play in acknowledging these different concerns, be they presentational or programmatic. The auteur’s style guide Although trained as a graphic designer, it was only when I encountered the immediacy of the web that I felt truly empowered as a designer. Given a desire to control every aspect of the resulting experience, I slowly adopted the role of an auteur, exploring every part of the web stack: front-end to back-end, and everything in between. A few years ago, I dreaded using the command line. Today, the terminal is a permanent feature in my Dock. In straddling the realms of graphic design and programming, it’s the point at which they meet that I find most fascinating, with each dicipline valuing the creation of effective systems, be they for communication or code efficiency. Front-end style guides live at this intersection, demonstrating both the modularity of code and the application of visual design. Painting by numbers In our rush to build modular systems, design frameworks have grown in popularity. While enabling quick assembly, these come at the cost of originality and creative expression – perhaps one reason why we’re seeing the homogenisation of web design. In editorial design, layouts should accentuate content and present it in an engaging manner. Yet on the web we see a practice that seeks templated predictability. In ‘Design Machines’ Travis Gertz argued that (emphasis added): Design systems still feel like a novelty in screen-based design. We nerd out over grid systems and modular scales and obsess over style guides and pattern libraries. We’re pretty good at using them to build repeatable components and site-wide standard… 2015 Paul Lloyd paulrobertlloyd 2015-12-16T00:00:00+00:00 https://24ways.org/2015/beyond-the-style-guide/ design
59 59 Animating Your Brand Let’s talk about how we add animation to our designs, in a way that’s consistent with other aspects of our brand, such as fonts, colours, layouts and everything else. Animating is fun. Adding animation to our designs can bring them to life and make our designs stand out. Animations can show how the pieces of our designs fit together. They provide context and help people use our products. All too often animation is something we tack on at the end. We put a transition on a modal window or sliding menu and we often don’t think about whether that animation is consistent with our overall design. Style guides to the rescue A style guide is a document that establishes and enforces style to improve communication. It can cover anything from typography and writing style to ethics and other, broader goals. It might be a static visual document showing every kind of UI, like in the Codecademy.com redesign shown below. UI toolkit from “Reimagining Codecademy.com” by @mslima It might be a technical reference with code examples. CodePen’s new design patterns and style guide is a great example of this, showing all the components used throughout the website as live code. CodePen’s design patterns and style guide A style guide gives a wide view of your project, it maintains consistency when adding new content, and we can use our style guide to present animations. Living documents Style guides don’t need to be static. We can use them to show movement. We can share CSS keyframe animations or transitions that can then go into production. We can also explain why animation is there in the first place. Just as a style guide might explain why we chose a certain font or layout, we can use style guides to explain the intent behind animation. This means that if someone else wants to create a new component, they will know why animation applies. If you haven’t yet set up a style guide, you might want to take a look at Pattern Lab. It’s a great tool for setting up your own style guide and includes loads of design patterns to get started. There … 2015 Donovan Hutchinson donovanhutchinson 2015-12-01T00:00:00+00:00 https://24ways.org/2015/animating-your-brand/ design
60 60 What’s Ahead for Your Data in 2016? Who owns your data? Who decides what can you do with it? Where can you store it? What guarantee do you have over your data’s privacy? Where can you publish your work? Can you adapt software to accommodate your disability? Is your tiny agency subject to corporate regulation? Does another country have rights over your intellectual property? If you aren’t the kind of person who is interested in international politics, I hate to break it to you: in 2016 the legal foundations which underpin our work on the web are being revisited in not one but three major international political agreements, and every single one of those questions is up for grabs. These agreements – the draft EU Data Protection Regulation (EUDPR), the Trans-Pacific Partnership (TPP), and the draft Transatlantic Trade and Investment Partnership (TTIP) – stand poised to have a major impact on your data, your workflows, and your digital rights. While some proposed changes could protect the open web for the future, other provisions would set the internet back several decades. In this article we will review the issues you need to be aware of as a digital professional. While each of these agreements covers dozens of topics ranging from climate change to food safety, we will focus solely on the aspects which pertain to the work we do on the web. The Trans-Pacific Partnership The Trans-Pacific Partnership (TPP) is a free trade agreement between the US, Japan, Malaysia, Vietnam, Singapore, Brunei, Australia, New Zealand, Canada, Mexico, Chile and Peru – a bloc comprising 40% of the world’s economy. The agreement is expected to be signed by all parties, and thereby to come into effect, in 2016. This agreement is ostensibly about the bloc and its members working together for their common interests. However, the latest draft text of the TPP, which was formulated entirely in secret, has only been made publicly available on a Medium blog published by the U.S. Trade Representative which features a patriotic banner at the top proclaiming “TPP: Made in America.” The m… 2015 Heather Burns heatherburns 2015-12-21T00:00:00+00:00 https://24ways.org/2015/whats-ahead-for-your-data-in-2016/ business
61 61 Animation in Responsive Design Animation and responsive design can sometimes feel like they’re at odds with each other. Animation often needs space to do its thing, but RWD tells us that the amount of space we’ll have available is going to change a lot. Balancing that can lead to some tricky animation situations. Embracing the squishiness of responsive design doesn’t have to mean giving up on your creative animation ideas. There are three general techniques that can help you balance your web animation creativity with your responsive design needs. One or all of these approaches might help you sneak in something just a little extra into your next project. Focused art direction Smaller viewports mean a smaller stage for your motion to play out on, and this tends to amplify any motion in your animation. Suddenly 100 pixels is really far and multiple moving parts can start looking like they’re battling for space. An effect that looked great on big viewports can become muddled and confusing when it’s reframed in a smaller space. Making animated movements smaller will do the trick for simple motion like a basic move across the screen. But for more complex animation on smaller viewports, you’ll need to simplify and reduce the number of moving parts. The key to this is determining what the vital parts of the animation are, to zone in on the parts that are most important to its message. Then remove the less necessary bits to distill the motion’s message down to the essentials. For example, Rally Interactive’s navigation folds down into place with two triangle shapes unfolding each corner on larger viewports. If this exact motion was just scaled down for narrower spaces the two corners would overlap as they unfolded. It would look unnatural and wouldn’t make much sense. Open video The main purpose of this animation is to show an unfolding action. To simplify the animation, Rally unfolds only one side for narrower viewports, with a slightly different animation. The action is still easily interpreted as unfolding and it’s done in a way that is a better… 2015 Val Head valhead 2015-12-09T00:00:00+00:00 https://24ways.org/2015/animation-in-responsive-design/ design
62 62 Being Customer Supportive Every day in customer support is an inbox, a Twitter feed, or a software forum full of new questions. Each is brimming with your customers looking for advice, reassurance, or fixes for their software problems. Each one is an opportunity to take a break from wrestling with your own troublesome tasks and assist someone else in solving theirs. Sometimes the questions are straightforward and can be answered in a few minutes with a short greeting, a link to a help page, or a prewritten bit of text you use regularly: how to print a receipt, reset a password, or even, sadly, close your account. More often, a support email requires you to spend some time unpacking the question, asking for more information, and writing a detailed personal response, tailored to help that particular user on this particular day. Here I offer a few of my own guidelines on how to make today’s email the best support experience for both me and my customer. And even if you don’t consider what you do to be customer support, you might still find the suggestions useful for the next time you need to communicate with a client, to solve a software problem with teammates, or even reach out and ask for help yourself. (All the examples appearing in this article are fictional. Any resemblance to quotes from real, software-using persons is entirely coincidental. Except for the bit about Star Wars. That happened.) Who’s TAHT girl I’ll be honest: I briefly tried making these recommendations into a clever mnemonic like FAST (facial drooping, arm weakness, speech difficulties, time) or PAD (pressure, antiseptic, dressing). But instead, you get TAHT: tone, ask, help, thank. Ah, well. As I work through each message in my support queue, I listen to the tone of the email ask clarifying questions bring in extra help as needed and thank the customer when the problem is solved. Let’s open an email and get started! Leave your message at the sound of the tone With our enthusiasm for emoji, it can be very hard to infer someone’s tone from plain text. How much time have… 2015 Elizabeth Galle elizabethgalle 2015-12-02T00:00:00+00:00 https://24ways.org/2015/being-customer-supportive/ process
63 63 Be Fluid with Your Design Skills: Build Your Own Sites Just five years ago in 2010, when we were all busy trying to surprise and delight, learning CSS3 and trying to get whole websites onto one page, we had a poster on our studio wall. It was entitled ‘Designers Vs Developers’, an infographic that showed us the differences between the men(!) who created websites. Designers wore skinny jeans and used Macs and developers wore cargo pants and brought their own keyboards to work. We began to learn that designers and developers were not only doing completely different jobs but were completely different people in every way. This opinion was backed up by hundreds of memes, millions of tweets and pages of articles which used words like void and battle and versus. Thankfully, things move quickly in this industry; the wide world of web design has moved on in the last five years. There are new devices, technologies, tools – and even a few women. Designers have been helped along by great apps, software, open source projects, conferences, and a community of people who, to my unending pride, love to share their knowledge and their work. So the world has moved on, and if Miley Cyrus, Ruby Rose and Eliot Sumner are identifying as gender fluid (an identity which refers to a gender which varies over time or is a combination of identities), then I would like to come out as discipline fluid! OK, I will probably never identify as a developer, but I will identify as fluid! How can we be anything else in an industry that moves so quickly? That’s how we should think of our skills, our interests and even our job titles. After all, Steve Jobs told us that “Design is not just what it looks like and feels like. Design is how it works.” Sorry skinny-jean-wearing designers – this means we’re all designing something together. And it’s not just about knowing the right words to use: you have to know how it feels. How it feels when you make something work, when you fix that bug, when you make it work on IE. Like anything in life, things run smoothly when you make the effort to share experiences, em… 2015 Ros Horner roshorner 2015-12-12T00:00:00+00:00 https://24ways.org/2015/be-fluid-with-your-design-skills-build-your-own-sites/ code
64 64 Being Responsive to the Small Things It’s that time of the year again to trim the tree with decorations. Or maybe a DOM tree? Any web page is made of HTML elements that lay themselves out in a tree structure. We start at the top and then have multiple branches with branches that branch out from there. To decorate our tree, we use CSS to specify which branches should receive the tinsel we wish to adorn upon it. It’s all so lovely. In years past, this was rather straightforward. But these days, our trees need to be versatile. They need to be responsive! Responsive web design is pretty wonderful, isn’t it? Based on our viewport, we can decide how elements on the page should change their appearance to accommodate various constraints using media queries. Clearleft have a delightfully clean and responsive site Alas, it’s not all sunshine, lollipops, and rainbows. With complex layouts, we may have design chunks — let’s call them components — that appear in different contexts. Each context may end up providing its own constraints on the design, both in its default state and in its possibly various responsive states. Media queries, however, limit us to the context of the entire viewport, not individual containers on the page. For every container our component lives in, we need to specify how to rearrange things in that context. The more complex the system, the more contexts we need to write code for. @media (min-width: 800px) { .features > .component { } .sidebar > .component {} .grid > .component {} } Each new component and each new breakpoint just makes the entire system that much more difficult to maintain. @media (min-width: 600px) { .features > .component { } .grid > .component {} } @media (min-width: 800px) { .features > .component { } .sidebar > .component {} .grid > .component {} } @media (min-width: 1024px) { .features > .component { } } Enter container queries Container queries, also known as element queries, allow you to specify conditional CSS based on the width (or maybe height) of the container that an element lives in.… 2015 Jonathan Snook jonathansnook 2015-12-19T00:00:00+00:00 https://24ways.org/2015/being-responsive-to-the-small-things/ code
65 65 The Accessibility Mindset Accessibility is often characterized as additional work, hard to learn and only affecting a small number of people. Those myths have no logical foundation and often stem from outdated information or misconceptions. Indeed, it is an additional skill set to acquire, quite like learning new JavaScript frameworks, CSS layout techniques or new HTML elements. But it isn’t particularly harder to learn than those other skills. A World Health Organization (WHO) report on disabilities states that, [i]ncluding children, over a billion people (or about 15% of the world’s population) were estimated to be living with disability. Being disabled is not as unusual as one might think. Due to chronic health conditions and older people having a higher risk of disability, we are also currently paving the cowpath to an internet that we can still use in the future. Accessibility has a very close relationship with usability, and advancements in accessibility often yield improvements in the usability of a website. Websites are also more adaptable to users’ needs when they are built in an accessible fashion. Beyond the bare minimum In the time of table layouts, web developers could create code that passed validation rules but didn’t adhere to the underlying semantic HTML model. We later developed best practices, like using lists for navigation, and with HTML5 we started to wrap those lists in nav elements. Working with accessibility standards is similar. The Web Content Accessibility Guidelines (WCAG) 2.0 can inform your decision to make websites accessible and can be used to test that you met the success criteria. What it can’t do is measure how well you met them. W3C developed a long list of techniques that can be used to make your website accessible, but you might find yourself in a situation where you need to adapt those techniques to be the most usable solution for your particular problem. The checkbox below is implemented in an accessible way: The input element has an id and the label associated with the checkbox refers to the in… 2015 Eric Eggert ericeggert 2015-12-17T00:00:00+00:00 https://24ways.org/2015/the-accessibility-mindset/ code
66 66 Solve the Hard Problems So, here we find ourselves on the cusp of 2016. We’ve had a good year – the web is still alive, no one has switched it off yet. Clients still have websites, teenagers still have phone apps, and there continue to be plenty of online brands to meaningfully engage with each day. Good job team, high fives all round. As it’s the time to make resolutions, I wanted to share three small ideas to take into the new year. Get good at what you do “How do you get to Carnegie Hall?” the old joke goes. “Practise, practise, practise.” We work in an industry where there is an awful lot to learn. There’s a lot to learn to get started and then once you do, there’s a lot more to learn to keep your skills current. Just when you think you’ve mastered something, it changes. This is true of many industries, of course, but the sheer pace of change for us makes learning not an annual activity, but daily. Learning takes time, and while I’m not convinced that every skill takes the fabled ten thousand hours to master, there is certainly no escaping that to remain current we must reinvest time in keeping our skills up to date. Picking where to spend your time One of the hardest aspects of this thing of ours is just choosing what to learn. If you, like me, invested any time in learning the Less CSS preprocessor over the last few years, you’ll probably now be spending your time relearning Sass instead. If you spent time learning Grunt, chances are you’ll now be thinking about whether you should switch to Gulp. It’s not just that there are new types of tools, there are new tools and frameworks to do the things you’re already doing, but, well, differently. Deciding what to learn is hard and the costs of backing the wrong horse can seriously mount up; so much so that by the time you’ve learned and then relearned the tools everyone says you need for your job, there’s rarely enough time to spend really getting to know how best to use them.  Practise, practise, practise Do you know how you don’t get to Carnegie Hall? By learning a new instrument eac… 2015 Drew McLellan drewmclellan 2015-12-24T00:00:00+00:00 https://24ways.org/2015/solve-the-hard-problems/ process
67 67 What I Learned about Product Design This Year 2015 was a humbling year for me. In September of 2014, I joined a tiny but established startup called SproutVideo as their third employee and first designer. The role interests me because it affords the opportunity to see how design can grow a solid product with a loyal user-base into something even better. The work I do now could also have a real impact on the brand and user experience of our product for years to come, which is a thrilling prospect in an industry where much of what I do feels small and temporary. I got in on the ground floor of something special: a small, dedicated, useful company that cares deeply about making video hosting effortless and rewarding for our users. I had (and still have) grand ideas for what thoughtful design can do for a product, and the smaller-scale product design work I’ve done or helped manage over the past few years gave me enough eager confidence to dive in head first. Readers who have experience redesigning complex existing products probably have a knowing smirk on their face right now. As I said, it’s been humbling. A year of focused product design, especially on the scale we are trying to achieve with our small team at SproutVideo, has taught me more than any projects in recent memory. I’d like to share a few of those lessons. Product design is very different from marketing design The majority of my recent work leading up to SproutVideo has been in marketing design. These projects are so fun because their aim is to communicate the value of the product in a compelling and memorable way. In order to achieve this goal, I spent a lot of time thinking about content strategy, responsive design, and how to create striking visuals that tell a story. These are all pursuits I love. Product design is a different beast. When designing a homepage, I can employ powerful imagery, wild gradients, and somewhat-quirky fonts. When I began redesigning the SproutVideo product, I wanted to draw on all the beautiful assets I’ve created for our marketing materials, but big gradients, textures… 2015 Meagan Fisher meaganfisher 2015-12-14T00:00:00+00:00 https://24ways.org/2015/what-i-learned-about-product-design-this-year/ design
68 68 Grid, Flexbox, Box Alignment: Our New System for Layout Three years ago for 24 ways 2012, I wrote an article about a new CSS layout method I was excited about. A specification had emerged, developed by people from the Internet Explorer team, bringing us a proper grid system for the web. In 2015, that Internet Explorer implementation is still the only public implementation of CSS grid layout. However, in 2016 we should be seeing it in a new improved form ready for our use in browsers. Grid layout has developed hidden behind a flag in Blink, and in nightly builds of WebKit and, latterly, Firefox. By being developed in this way, breaking changes could be safely made to the specification as no one was relying on the experimental implementations in production work. Another new layout method has emerged over the past few years in a more public and perhaps more painful way. Shipped prefixed in browsers, The flexible box layout module (flexbox) was far too tempting for developers not to use on production sites. Therefore, as changes were made to the specification, we found ourselves with three different flexboxes, and browser implementations that did not match one another in completeness or in the version of specified features they supported. Owing to the different ways these modules have come into being, when I present on grid layout it is often the very first time someone has heard of the specification. A question I keep being asked is whether CSS grid layout and flexbox are competing layout systems, as though it might be possible to back the loser in a CSS layout competition. The reality, however, is that these two methods will sit together as one system for doing layout on the web, each method playing to certain strengths and serving particular layout tasks. If there is to be a loser in the battle of the layouts, my hope is that it will be the layout frameworks that tie our design to our markup. They have been a necessary placeholder while we waited for a true web layout system, but I believe that in a few years time we’ll be easily able to date a website to circa 2015 … 2015 Rachel Andrew rachelandrew 2015-12-15T00:00:00+00:00 https://24ways.org/2015/grid-flexbox-box-alignment-our-new-system-for-layout/ code
69 69 How to Do a UX Review A UX review is where an expert goes through a website looking for usability and experience problems and makes recommendations on how to fix them. I’ve completed a number of UX reviews over my twelve years working as a user experience consultant and I thought I’d share my approach. I’ll be talking about reviewing websites here; you can adapt the approach for web apps, or mobile or desktop apps. Why conduct a review Typically, a client asks for a review to be undertaken by a trusted and, ideally, detached third party who either works for an agency or is a freelancer. Often they may ask a new member of the UX team to complete one, or even set it as a task for a job interview. This indicates the client is looking for an objective view, seen from the outside as a user would see the website. I always suggest conducting some user research rather than a review. Users know their goals and watching them make (what you might think of as) mistakes on the website is invaluable. Conducting research with six users can give you six hours’ worth of review material from six viewpoints. In short, user research can identify more problems and show how common those problems might be. There are three reasons, though, why a review might better suit client needs than user research: Quick results: user research and analysis takes at least three weeks. Limited budget: the £6–10,000 cost to run user research is about twice the cost of a UX review. Users are hard to reach: in the business-to-business world, reaching users is difficult, especially if your users hold senior positions in their organisations. Working with consumers is much easier as there are often more of them. There is some debate about the benefits of user research over UX review. In my experience you learn far more from research, but opinions differ. Be objective The number one mistake many UX reviewers make is reporting back the issues they identify as their opinion. This can cause credibility problems because you have to keep justifying why your opinion is corr… 2015 Joe Leech joeleech 2015-12-03T00:00:00+00:00 https://24ways.org/2015/how-to-do-a-ux-review/ ux
70 70 Bringing Your Code to the Streets — or How to Be a Street VJ Our amazing world of web code is escaping out of the browser at an alarming rate and appearing in every aspect of the environment around us. Over the past few years we’ve already seen JavaScript used server-side, hardware coded with JavaScript, a rise of native style and desktop apps created with HTML, CSS and JavaScript, and even virtual reality (VR) is getting its fair share of front-end goodness. You can go ahead and play with JavaScript-powered hardware such as the Tessel or the Espruino to name a couple. Just check out the Tessel project page to see JavaScript in the world of coffee roasting or sleep tracking your pet. With the rise of the internet of things, JavaScript can be seen collecting information on flooding among other things. And if that’s not enough ‘outside the browser’ implementations, Node.js servers can even be found in aircraft! I previously mentioned VR and with three.js’s extra StereoEffect.js module it’s relatively simple to get browser 3D goodness to be Google Cardboard-ready, and thus set the stage for all things JavaScript and VR. It’s been pretty popular in the art world too, with interactive works such as Seb Lee-Delisle’s Lunar Trails installation, featuring the old arcade game Lunar Lander, which you can now play in your browser while others watch (it is the web after all). The Science Museum in London held Chrome Web Lab, an interactive exhibition featuring five experiments, showcasing the magic of the web. And it’s not even the connectivity of the web that’s being showcased; we can even take things offline and use web code for amazing things, such as fighting Ebola. One thing is for sure, JavaScript is awesome. Hell, if you believe those telly programs (as we all do), JavaScript can even take down the stock market, purely through the witchcraft of canvas! Go JavaScript! Now it’s our turn So I wanted to create a little project influenced by this theme, and as it’s Christmas, take it to the streets for a little bit of party fun! Something that could take c… 2015 Ruth John ruthjohn 2015-12-06T00:00:00+00:00 https://24ways.org/2015/bringing-your-code-to-the-streets/ code
71 71 Upping Your Web Security Game When I started working in web security fifteen years ago, web development looked very different. The few non-static web applications were built using a waterfall process and shipped quarterly at best, making it possible to add security audits before every release; applications were deployed exclusively on in-house servers, allowing Info Sec to inspect their configuration and setup; and the few third-party components used came from a small set of well-known and trusted providers. And yet, even with these favourable conditions, security teams were quickly overwhelmed and called for developers to build security in. If the web security game was hard to win before, it’s doomed to fail now. In today’s web development, every other page is an application, accepting inputs and private data from users; software is built continuously, designed to eliminate manual gates, including security gates; infrastructure is code, with servers spawned with little effort and even less security scrutiny; and most of the code in a typical application is third-party code, pulled in through open source repositories with rarely a glance at who provided them. Security teams, when they exist at all, cannot solve this problem. They are vastly outnumbered by developers, and cannot keep up with the application’s pace of change. For us to have a shot at making the web secure, we must bring security into the core. We need to give it no less attention than that we give browser compatibility, mobile design or web page load times. More broadly, we should see security as an aspect of quality, expecting both ourselves and our peers to address it, and taking pride when we do it well. Where To Start? Embracing security isn’t something you do overnight. A good place to start is by reviewing things you’re already doing – and trying to make them more secure. Here are three concrete steps you can take to get going. HTTPS Threats begin when your system interacts with the outside world, which often means HTTP. As is, HTTP is painfully insecure, allowing attacke… 2015 Guy Podjarny guypodjarny 2015-12-11T00:00:00+00:00 https://24ways.org/2015/upping-your-web-security-game/ code
72 72 Designing with Contrast When an appetite for aesthetics over usability becomes the bellwether of user interface design, it’s time to reconsider who we’re designing for. Over the last few years, we have questioned the signifiers that gave obvious meaning to the function of interface elements. Strong textures, deep shadows, gradients — imitations of physical objects — were discarded. And many, rightfully so. Our audiences are now more comfortable with an experience that feels native to the technology, so we should respond in kind. Yet not all of the changes have benefitted users. Our efforts to simplify brought with them a trend of ultra-minimalism where aesthetics have taken priority over legibility, accessibility and discoverability. The trend shows no sign of losing popularity — and it is harming our experience of digital content. A thin veneer We are in a race to create the most subdued, understated interface. Visual contrast is out. In its place: the thinnest weights of a typeface and white text on bright color backgrounds. Headlines, text, borders, backgrounds, icons, form controls and inputs: all grey. While we can look back over the last decade and see minimalist trends emerging on the web, I think we can place a fair share of the responsibility for the recent shift in priorities on Apple. The release of iOS 7 ushered in a radical change to its user interface. It paired mobile interaction design to the simplicity and eloquence of Apple’s marketing and product design. It was a catalyst. We took what we saw, copied and consumed the aesthetics like pick-and-mix. New technology compounds this trend. Computer monitors and mobile devices are available with screens of unprecedented resolutions. Ultra-light type and subtle hues, difficult to view on older screens, are more legible on these devices. It would be disingenuous to say that designers have always worked on machines representative of their audience’s circumstances, but the gap has never been as large as it is now. We are running the risk of designing VIP lounges where the cost o… 2015 Mark Mitchell markmitchell 2015-12-13T00:00:00+00:00 https://24ways.org/2015/designing-with-contrast/ design
25 25 The Introvert Owner’s Manual Nobody realizes that some people expend tremendous energy merely to be normal. Albert Camus “Whatever you plan, just make sure there are lots of people there,” said my husband in the run-up to his birthday last year. A few months later, before my own birthday, I uttered, “Whatever you plan, just make sure it is only me and you.” I am an introvert. It is very likely some of you are too, or that you live, work or fraternise with one. Despite there being quite a few of us out there – some say as many as one third of the population, others as little as ten per cent – I think our professional and social lives are biased towards a definition of normality that is more accepting of the extrovert. I hope that by reading this article you will gain some insight to what goes on inside the head of the introvert(s) that you know and understand how to relate to them in a way that respects their disposition. Before we go any further, I should define what exactly being an introvert means, and, equally important, what it does not. Only once this is established will you be able to handle your introvert correctly. What defines an introvert The simplest and most accurate way of describing an introvert is that she uses up energy in social situations and needs to be in solitude to recharge. To explain what I mean, let us take the example of the The Sims: when you create a Sim, you can choose (among other characteristics) whether it will be outgoing or not. If the Sim is outgoing, when you play the game you need to make sure it interacts as much as possible with other Sims or its mood indicator (the plumbob) will become red and that is a bad thing. Conversely, if your Sim is not outgoing, when you put it in too many social situations its plumbob will become red too. So your (real life) introvert might think you are great (you might even be her best friend, her spouse or her child), but if her plumbob is red, or nearly, she might just need a little time and space to recharge before she is ready to interact. This is not the same … 2014 Inayaili de León Persson inayailideleon 2014-12-13T00:00:00+00:00 https://24ways.org/2014/the-introvert-owners-manual/ process
26 26 Integrating Contrast Checks in Your Web Workflow It’s nearly Christmas, which means you’ll be sure to find an overload of festive red and green decorating everything in sight—often in the ugliest ways possible. While I’m not here to battle holiday tackiness in today’s 24 ways, it might just be the perfect reminder to step back and consider how we can implement colour schemes in our websites and apps that are not only attractive, but also legible and accessible for folks with various types of visual disabilities. This simulated photo demonstrates how red and green Christmas baubles could appear to a person affected by protanopia-type colour blindness—not as festive as you might think. Source: Derek Bruff I’ve been fortunate to work with Simply Accessible to redesign not just their website, but their entire brand. Although the new site won’t be launching until the new year, we’re excited to let you peek under the tree and share a few treats as a case study into how we tackled colour accessibility in our project workflow. Don’t worry—we won’t tell Santa! Create a colour game plan A common misconception about accessibility is that meeting compliance requirements hinders creativity and beautiful design—but we beg to differ. Unfortunately, like many company websites and internal projects, Simply Accessible has spent so much time helping others that they had not spent enough time helping themselves to show the world who they really are. This was the perfect opportunity for them to practise what they preached. After plenty of research and brainstorming, we decided to evolve the existing Simply Accessible brand. Or, rather, salvage what we could. There was no established logo to carry into the new design (it was a stretch to even call it a wordmark), and the Helvetica typography across the site lacked any character. The only recognizable feature left to work with was colour. It was a challenge, for sure: the oranges looked murky and brown, and the blues looked way too corporate for a company like Simply Accessible. We knew we needed to inject a lot of personalit… 2014 Geri Coady gericoady 2014-12-22T00:00:00+00:00 https://24ways.org/2014/integrating-contrast-checks-in-your-web-workflow/ design
27 27 Putting Design on the Map The web can leave us feeling quite detached from the real world. Every site we make is really just a set of abstract concepts manifested as tools for communication and expression. At any minute, websites can disappear, overwritten by a newfangled version or simply gone. I think this is why so many of us have desires to create a product, write a book, or play with the internet of things. We need to keep in touch with the physical world and to prove (if only to ourselves) that we do make real things. I could go on and on about preserving the web, the challenges of writing a book, or thoughts about how we can deal with the need to make real things. Instead, I’m going to explore something that gives us a direct relationship between a website and the physical world – maps. A map does not just chart, it unlocks and formulates meaning; it forms bridges between here and there, between disparate ideas that we did not know were previously connected. Reif Larsen, The Selected Works of T.S. Spivet The simplest form of map on a website tends to be used for showing where a place is and often directions on how to get to it. That’s an incredibly powerful tool. So why is it, then, that so many sites just plonk in a default Google Map and leave it as that? You wouldn’t just use dark grey Helvetica on every site, would you? Where’s the personality? Where’s the tailored experience? Where is the design? Jumping into design Let’s keep this simple – we all want to be better web folk, not cartographers. We don’t need to go into the history, mathematics or technology of map making (although all of those areas are really interesting to research). For the sake of our sanity, I’m going to gloss over some of the technical areas and focus on the practical concepts. Tiles If you’ve ever noticed a map loading in sections, it’s because it uses tiles that are downloaded individually instead of requiring the user to download everything that they might need. These tiles come in many styles and can be used for anything that covers large ar… 2014 Shane Hudson shanehudson 2014-12-11T00:00:00+00:00 https://24ways.org/2014/putting-design-on-the-map/ design
28 28 Why You Should Design for Open Source Let’s be honest. Most designers don’t like working for nothing. We rally against spec work and make a stand for contracts and getting paid. That’s totally what you should do as a professional designer in the industry. It’s your job. It’s your hard-working skill. It’s your bread and butter. Get paid. However, I’m going to make a case for why you could also consider designing for open source. First, I should mention that not all open source work is free work. Some companies hire open source contributors to work on their projects full-time, usually because that project is used by said company. There are other companies that encourage open source contribution and even offer 20%-time for these projects (where you can spend one day a week contributing to open source). These are super rad situations to be in. However, whether you’re able to land a gig doing this type of work, or you’ve decided to volunteer your time and energy, designing for open source can be rewarding in many other ways. Portfolio building New designers often find themselves in a catch-22 situation: they don’t have enough work experience showcased in their portfolio, which leads to them not getting much work because their portfolio is bare. These new designers often turn to unsolicited redesigns to fill their portfolio. An unsolicited redesign is a proof of concept in which a designer attempts to redesign a popular website. You can see many of these concepts on sites like Dribbble and Behance and there are even websites dedicated to showcasing these designs, such as Uninvited Designs. There’s even a subreddit for them. There are quite a few negative opinions on unsolicited redesigns, though some people see things from both sides. If you feel like doing one or two of these to fill your portfolio, that’s of course up to you. But here’s a better suggestion. Why not contribute design for an open source project instead? You can easily find many projects in great need of design work, from branding to information design, documentation, and website or ap… 2014 Jina Anne jina 2014-12-19T00:00:00+00:00 https://24ways.org/2014/why-you-should-design-for-open-source/ design

Next page

Advanced export

JSON shape: default, array, newline-delimited

CSV options: 

CREATE TABLE [articles] (
               [title] TEXT  ,
   [contents] TEXT  ,
   [year] TEXT  ,
   [author] TEXT  ,
   [author_slug] TEXT  ,
   [published] TEXT  ,
   [url] TEXT  ,
   [topic] TEXT  
        );