articles
336 rows sorted by author descending
This data as json, CSV (advanced)
Suggested facets: year, topic, published (date)
| Link | rowid | title | contents | year | author ▲ | author_slug | published | url | topic |
|---|---|---|---|---|---|---|---|---|---|
| 290 | 290 | Creating a Weekly Research Cadence | Working on a product team, it’s easy to get hyper-focused on building features and lose sight of your users and their daily challenges. User research can be time-consuming to set up, so it often becomes ad-hoc and irregular, only performed in response to a particular question or concern. But without frequent touch points and opportunities for discovery, your product will stagnate and become less and less relevant. Setting up an efficient cadence of weekly research conversations will re-focus your team on user problems and provide a steady stream of insights for product development. As my team transitioned into a Lean process earlier this year, we needed a way to get more feedback from users in a short amount of time. Our users are internet marketers—always busy and often difficult to reach. Scheduling research took days of emailing back and forth to find mutually agreeable times, and juggling one-off conversations made it difficult to connect with more than one or two people per week. The slow pace of research was allowing additional risk to creep into our product development. I wanted to find a way for our team to test ideas and validate assumptions sooner and more often—but without increasing the administrative burden of scheduling. The solution: creating a regular cadence of research and testing that required a minimum of effort to coordinate. Setting up a weekly user research cadence accelerated our learning and built momentum behind strategic experiments. By dedicating time every week to talk to a few users, we made ongoing research a painless part of every weekly sprint. But increasing the frequency of our research had other benefits as well. With only five working days between sessions, a weekly cadence forced us to keep our work small and iterative. Committing to testing something every week meant showing work earlier and more often than we might have preferred—pushing us out of your comfort zone into a process of more rapid experimentation. Best of all, frequent conversations with users helped us become… | 2016 | Wren Lanier | wrenlanier | 2016-12-02T00:00:00+00:00 | https://24ways.org/2016/creating-a-weekly-research-cadence/ | ux |
| 111 | 111 | Geometric Background Patterns | When the design is finished and you’re about to start the coding process, you have to prepare your graphics. If you’re working with a pattern background you need to export only the repeating fragment. It can be a bit tricky to isolate a fragment to achieve a seamless pattern background. For geometric patterns there is a method I always follow and that I want to share with you. Take for example a perfect 45° diagonal line pattern. How do you define this pattern fragment so it will be rendered seamlessly? Here is the method I usually follow to avoid a mismatch. First, zoom in so you see enough detail and you can distinguish the pixels. Select the Rectangular Marquee Selection tool and start your selection at the intersection of 2 different colors of a diagonal line. Hold down the Shift key while dragging so you drag a perfect square. Release the mouse when you reach the exact same intesection (as your starting) point at the top right. Copy this fragment (using Copy Merged: Cmd/Ctrl + Shift + C) and paste the fragment in a new layer. Give this layer the name ‘pattern’. Now hold down the Command Key (Control Key on Windows) and click on the ‘pattern’ layer in the Layers Palette to select the fragment. Now go to Edit > Define Pattern, enter a name for your pattern and click OK. Test your pattern in a new document. Create a new document of 600 px by 400px, hit Cmd/Ctrl + A and go to Edit > Fill… and choose your pattern. If the result is OK, you have created a perfect pattern fragment. Below you see this pattern enlarged. The guides show the boundaries of the pattern fragment and the red pixels are the reference points. The red pixels at the top right, bottom right and bottom left should match the red pixel at the top left. This technique should work for every geometric pattern. Some patterns are easier than others, but this, and the Photoshop pattern fill test, has always been my guideline. Other geometric pattern examples Example 1 Not all geometric pattern fragments are squares. Some patterns … | 2008 | Veerle Pieters | veerlepieters | 2008-12-02T00:00:00+00:00 | https://24ways.org/2008/geometric-background-patterns/ | design |
| 131 | 131 | Random Lines Made With Mesh | I know that Adobe Illustrator can be a bit daunting for people who aren’t really advanced users of the program, but you would be amazed by how easy you can create cool effects or backgrounds. In this short tutorial I show you how to create a cool looking background only in 5 steps. Step 1 – Create Lines Create lines using random widths and harmonious suitable colors. If you get stuck on finding the right colors, check out Adobe’s Kuler and start experimenting. Step 2 – Convert Strokes to Fills Select all lines and convert them to fills. Go to the Object menu, select Path > Outline Stroke. Select the Rectangle tool and draw 1 big rectangle on top the lines. Give the rectangle a suitable color. With the rectangle still selected, go to the Object menu, select Arrange > Send to Back. Step 3 – Convert to Mesh Select all objects by pressing the command key (for Mac users), control key (for Windows users) + the “a” key. Go to the Object menu and select the Envelope Distort > Make with Mesh option. Enter 2 rows and 2 columns. Check the preview box to see what happens and click the OK button. Step 4 – Play Around with The Mesh Points Play around with the points of the mesh using the Direct Selection tool (the white arrow in the Toolbox). Click on the top right point of the mesh. Once you’re starting to drag hold down the shift key and move the point upwards. Now start dragging the bezier handles on the mesh to achieve the effect as shown in the above picture. Of course you can try out all kind of different effects here. The Final Result This is an example of how the final result can look. You can try out all kinds of different shapes dragging the handles of the mesh points. This is just one of the many results you can get. So next time you haven’t got inspiration for a background of a header, a banner or whatever, just experiment with a few basic shapes such as lines and try out the ‘Envelope Distort’ options in Illustrator or the ‘Make with Mesh’ option and experiment, you’ll be amazed by the u… | 2006 | Veerle Pieters | veerlepieters | 2006-12-08T00:00:00+00:00 | https://24ways.org/2006/random-lines-made-with-mesh/ | design |
| 232 | 232 | Optimize Your Web Design Workflow | I’m not sure about you, but I still favour using Photoshop to create my designs for the web. I agree that this application, even with its never-ending feature set, is not the perfect environment to design websites in. The ideal application doesn’t exist yet, however, so until it does it’s maybe not such a bad idea to investigate ways to optimize our workflow. Why use Photoshop? It will probably not come as a surprise if I say that Photoshop and Illustrator are the applications that I know best and feel most comfortable and creative in. Some people prefer Fireworks for web design. Even though I understand people’s motivations, I still prefer Photoshop personally. On the occasions that I gave Fireworks a try, I ended up just using the application to export my images as slices, or to prepare a dummy for the client. For some reason, I’ve never been able to find my way in that app. There were always certain things missing that could only be done in either Photoshop or Illustrator, which bothered me. Why not start in the browser? These days, with CSS3 styling emerging, there are people who find it more efficient to design in the browser. I agree that at a certain point, once the basic design is all set and defined, you can jump right into the code and go from there. But the actual creative part, at least for me, needs to be done in an application such as Photoshop. As a designer I need to be able to create and experiment with shapes on the fly, draw things, move them around, change colours, gradients, effects, and so on. I can’t see me doing this with code. I’m sure if I switch to markup too quickly, I might end up with a rather boxy and less interesting design. Once I start playing with markup, I leave my typical ‘design zone’. My brain starts thinking differently – more rational and practical, if you know what I mean; I start to structure and analyse how to mark up my design in the most efficient semantic way. When I design, I tend to let that go for a bit. I think more freely and not so much about the limitatio… | 2010 | Veerle Pieters | veerlepieters | 2010-12-10T00:00:00+00:00 | https://24ways.org/2010/optimize-your-web-design-workflow/ | process |
| 61 | 61 | Animation in Responsive Design | Animation and responsive design can sometimes feel like they’re at odds with each other. Animation often needs space to do its thing, but RWD tells us that the amount of space we’ll have available is going to change a lot. Balancing that can lead to some tricky animation situations. Embracing the squishiness of responsive design doesn’t have to mean giving up on your creative animation ideas. There are three general techniques that can help you balance your web animation creativity with your responsive design needs. One or all of these approaches might help you sneak in something just a little extra into your next project. Focused art direction Smaller viewports mean a smaller stage for your motion to play out on, and this tends to amplify any motion in your animation. Suddenly 100 pixels is really far and multiple moving parts can start looking like they’re battling for space. An effect that looked great on big viewports can become muddled and confusing when it’s reframed in a smaller space. Making animated movements smaller will do the trick for simple motion like a basic move across the screen. But for more complex animation on smaller viewports, you’ll need to simplify and reduce the number of moving parts. The key to this is determining what the vital parts of the animation are, to zone in on the parts that are most important to its message. Then remove the less necessary bits to distill the motion’s message down to the essentials. For example, Rally Interactive’s navigation folds down into place with two triangle shapes unfolding each corner on larger viewports. If this exact motion was just scaled down for narrower spaces the two corners would overlap as they unfolded. It would look unnatural and wouldn’t make much sense. Open video The main purpose of this animation is to show an unfolding action. To simplify the animation, Rally unfolds only one side for narrower viewports, with a slightly different animation. The action is still easily interpreted as unfolding and it’s done in a way that is a better… | 2015 | Val Head | valhead | 2015-12-09T00:00:00+00:00 | https://24ways.org/2015/animation-in-responsive-design/ | design |
| 76 | 76 | Giving CSS Animations and Transitions Their Place | CSS animations and transitions may not sit squarely in the realm of the behaviour layer, but they’re stepping up into this area that used to be pure JavaScript territory. Heck, CSS might even perform better than its JavaScript equivalents in some cases. That’s pretty serious! With CSS’s new tricks blurring the lines between presentation and behaviour, it can start to feel bloated and messy in our CSS files. It’s an uncomfortable feeling. Here are a pair of methods I’ve found to be pretty helpful in keeping the potential bloat and wire-crossing under control when CSS has its hands in both presentation and behaviour. Same eggs, more baskets Structuring your CSS to have separate files for layout, typography, grids, and so on is a fairly common approach these days. But which one do you put your transitions and animations in? The initial answer, as always, is “it depends”. Small effects here and there will likely sit just fine with your other styles. When you move into more involved effects that require multiple animations and some logic support from JavaScript, it’s probably time to choose none of the above, and create a separate CSS file just for them. Putting all your animations in one file is a huge help for code organization. Even if you opt for a name less literal than animations.css, you’ll know exactly where to go for anything CSS animation related. That saves time and effort when it comes to editing and maintenance. Keeping track of which animations are still currently used is easier when they’re all grouped together as well. And as an added bonus, you won’t have to look at all those horribly unattractive and repetitive prefixed @-keyframe rules unless you actually need to. An animations.css file might look something like the snippet below. It defines each animation’s keyframes and defines a class for each variation of that animation you’ll be using. Depending on the situation, you may also want to include transitions here in a similar way. (I’ve found defining transitions as their own class, or mixin, … | 2012 | Val Head | valhead | 2012-12-08T00:00:00+00:00 | https://24ways.org/2012/giving-css-animations-and-transitions-their-place/ | code |
| 210 | 210 | Stop Leaving Animation to the Last Minute | Our design process relies heavily on static mockups as deliverables and this makes it harder than it needs to be to incorporate UI animation in our designs. Talking through animation ideas and dancing out the details of those ideas can be fun; but it’s not always enough to really evaluate or invest in animated design solutions. By including deliverables that encourage discussing animation throughout your design process, you can set yourself (and your team) up for creating meaningful UI animations that feel just as much a part of the design as your colour palette and typeface. You can get out of that “running out of time to add in the animation” trap by deliberately including animation in the early phases of your design process. This will give you both the space to treat animation as a design tool, and the room to iterate on UI animation ideas to come up with higher quality solutions. Two deliverables that can be especially useful for this are motion comps and animated interactive prototypes. Motion comps - an animation deliverable Motion comps (also called animatics or motion mock-ups) are usually video representation of UI animations. They are used to explore the details of how a particular animation might play out. And they’re most often made with timeline-based tools like Adobe After Effects, Adobe Animate, or Tumult Hype. The most useful things about motion comps is how they allow designers and developers to share the work of creating animations. (Instead of pushing all the responsibility of animation on one group or the other.) For example, imagine you’re working on a design that has a content panel that can either be open or closed. You might create a mockup like the one below including the two different views: the closed state and the open state. If you’re working with only static deliverables, these two artboards might be exactly what you handoff to developers along with the instruction to animate between the two. On the surface that seems pretty straight forward, but even with this relatively simple… | 2017 | Val Head | valhead | 2017-12-08T00:00:00+00:00 | https://24ways.org/2017/stop-leaving-animation-to-the-last-minute/ | design |
| 205 | 205 | Why Design Systems Fail | Design systems are so hot right now, and for good reason. They promote a modular approach to building a product, and ensure organizational unity and stability via reusable code snippets and utility styles. They make prototyping a breeze, and provide a common language for both designers and developers. A design system is a culmination of several individual components, which can include any or all of the following (and more): Style guide or visual pattern library Design tooling (e.g. Sketch Library) Component library (where the components live in code) Code usage guidelines and documentation Design usage documentation Voice and tone guideline Animation language guideline Design systems are standalone (internal or external) products, and have proven to be very effective means of design-driven development. However, in order for a design system to succeed, everyone needs to get on board. I’d like to go over a few considerations to ensure design system success and what could hinder that success. Organizational Support Put simply, any product, including internal products, needs support. Something as cross-functional as a design system, which spans every vertical project team, needs support from the top and bottom levels of your organization. What I mean by that is that there needs to be top-level support from project managers up through VP’s to see the value of a design system, to provide resources for its implementation, and advocate for its use company-wide. This is especially important in companies where such systems are being put in place on top of existing, crufty codebases, because it may mean there needs to be some time and effort put in the calendar for refactoring work. Support from the bottom-up means that designers and engineers of all levels also need to support this system and feel responsibility for it. A design system is an organization’s product, and everyone should feel confident contributing to it. If your design system supports external clients as well (such as contractors), they too can become val… | 2017 | Una Kravets | unakravets | 2017-12-14T00:00:00+00:00 | https://24ways.org/2017/why-design-systems-fail/ | process |
| 175 | 175 | Front-End Code Reusability with CSS and JavaScript | Most web standards-based developers are more than familiar with creating their sites with semantic HTML with lots and lots of CSS. With each new page in a design, the CSS tends to grow and grow and more elements and styles are added. But CSS can be used to better effect. The idea of object-oriented CSS isn’t new. Nicole Sullivan has written a presentation on the subject and outlines two main concepts: separate structure and visual design; and separate container and content. Jeff Croft talks about Applying OOP Concepts to CSS: I can make a class of .box that defines some basic layout structure, and another class of .rounded that provides rounded corners, and classes of .wide and .narrow that define some widths, and then easily create boxes of varying widths and styles by assigning multiple classes to an element, without having to duplicate code in my CSS. This concept helps reduce CSS file size, allows for great flexibility, rapid building of similar content areas and means greater consistency throughout the entire design. You can also take this concept one step further and apply it to site behaviour with JavaScript. Build a versatile slideshow I will show you how to build multiple slideshows using jQuery, allowing varying levels of functionality which you may find on one site design. The code will be flexible enough to allow you to add previous/next links, image pagination and the ability to change the animation type. More importantly, it will allow you to apply any combination of these features. Image galleries are simply a list of images, so the obvious choice of marking the content up is to use a <ul>. Many designs, however, do not cater to non-JavaScript versions of the website, and thus don’t take in to account large multiple images. You could also simply hide all the other images in the list, apart from the first image. This method can waste bandwidth because the other images might be downloaded when they are never going to be seen. Taking this second concept — only showing one image — the only co… | 2009 | Trevor Morris | trevormorris | 2009-12-06T00:00:00+00:00 | https://24ways.org/2009/front-end-code-reusability-with-css-and-javascript/ | code |
| 82 | 82 | Being Prepared To Contribute | “You’ll figure it out.” The advice my dad gives has always been the same, whether addressing my grade school homework or paying bills after college. If I was looking for a shortcut, my dad wasn’t going to be the one to provide it. When I was a kid it infuriated the hell out of me, but what I then perceived to be a lack of understanding turned out to be a keystone in my upbringing. As an adult, I realize the value in not receiving outright solutions, but being forced to figure things out. Even today, when presented with a roadblock while building for the web, I am temped to get by with the help of the latest grid system, framework, polyfill, or plugin. In and of themselves these resources are harmless, but before I can drop them in, those damn words still echo in the back of my mind: “You’ll figure it out.” I know that if I blindly implement these tools as drag and drop solutions I fail to understand the intricacies behind how and why they were built; repeatedly using them as shortcuts handicaps my skill set. When I solely rely on the tools of others, my work is at their mercy, leaving me less creative and resourceful, and, thus, less able to contribute to the advancement of our industry and community. One of my favorite things about this community is how generous and collaborative it can be. I’ve loved seeing FitVids used all over the web and regularly improved upon at Github. I bet we can all think of a time where implementing a shared resource has benefitted our own work and sanity. Because these resources are so valuable, it’s important that we continue to be a part of the conversation in order to further develop solutions and ideas. It’s easy to assume there’s someone smarter or more up-to-date in any one area, but with a degree of understanding and perspective, we can all participate. This open form of collaboration is in our web DNA. After all, its primary purpose was to promote the exchange and development of new ideas. Tim Berners-Lee proposed a global hypertext project, to be known as the Worl… | 2012 | Trent Walton | trentwalton | 2012-12-03T00:00:00+00:00 | https://24ways.org/2012/being-prepared-to-contribute/ | process |
| 11 | 11 | JavaScript: Taking Off the Training Wheels | JavaScript is the third pillar of front-end web development. Of those pillars, it is both the most powerful and the most complex, so it’s understandable that when 24 ways asked, “What one thing do you wish you had more time to learn about?”, a number of you answered “JavaScript!” This article aims to help you feel happy writing JavaScript, and maybe even without libraries like jQuery. I can’t comprehensively explain JavaScript itself without writing a book, but I hope this serves as a springboard from which you can jump to other great resources. Why learn JavaScript? So what’s in it for you? Why take the next step and learn the fundamentals? Confidence with jQuery If nothing else, learning JavaScript will improve your jQuery code; you’ll be comfortable writing jQuery from scratch and feel happy bending others’ code to your own purposes. Writing efficient, fast and bug-free jQuery is also made much easier when you have a good appreciation of JavaScript, because you can look at what jQuery is really doing. Understanding how JavaScript works lets you write better jQuery because you know what it’s doing behind the scenes. When you need to leave the beaten track, you can do so with confidence. In fact, you could say that jQuery’s ultimate goal is not to exist: it was invented at a time when web APIs were very inconsistent and hard to work with. That’s slowly changing as new APIs are introduced, and hopefully there will come a time when jQuery isn’t needed. An example of one such change is the introduction of the very useful document.querySelectorAll. Like jQuery, it converts a CSS selector into a list of matching elements. Here’s a comparison of some jQuery code and the equivalent without. $('.counter').each(function (index) { $(this).text(index + 1); }); var counters = document.querySelectorAll('.counter'); [].slice.call(counters).forEach(function (elem, index) { elem.textContent = index + 1; }); Solving problems no one else has! When you have to go to the internet to solve a problem, you’re forever st… | 2013 | Tom Ashworth | tomashworth | 2013-12-05T00:00:00+00:00 | https://24ways.org/2013/javascript-taking-off-the-training-wheels/ | code |
| 294 | 294 | New Tricks for an Old Dog | Much of my year has been spent helping new team members find their way around the expansive and complex codebase that is the TweetDeck front-end, trying to build a happy and productive group of people around a substantial codebase with many layers of legacy. I’ve loved doing this. Everything from writing new documentation, drawing diagrams, and holding technical architecture sessions teaches you something you didn’t know or exposes an area of uncertainty that you can go work on. In this article, I hope to share some experiences and techniques that will prove useful in your own situation and that you can impress your friends in some new and exciting ways! How do you do, fellow kids? To start with I’d like to introduce you to our JavaScript framework, Flight. Right now it’s used by twitter.com and TweetDeck although, as a company, Twitter is largely moving to React. Over time, as we used Flight for more complex interfaces, we found it wasn’t scaling with us. Composing components into trees was fiddly and often only applied for a specific parent-child pairing. It seems like an obvious feature with hindsight, but it didn’t come built-in to Flight, and it made reusing components a real challenge. There was no standard way to manage the state of a component; they all did it slightly differently, and the technique often varied by who was writing the code. This cost us in maintainability as you just couldn’t predict how a component would be built until you opened it. Making matters worse, Flight relied on events to move data around the application. Unfortunately, events aren’t good for giving structure to complex logic. They jump around in a way that’s hard to understand and debug, and force you to search your code for a specific string — the event name‚ to figure out what’s going on. To find fixes for these problems, we looked around at other frameworks. We like React for it’s simple, predictable state management and reactive re-render flow, and Elm for bringing strict functional programming to everyone. But when you ha… | 2016 | Tom Ashworth | tomashworth | 2016-12-18T00:00:00+00:00 | https://24ways.org/2016/new-tricks-for-an-old-dog/ | code |
| 119 | 119 | Rocking Restrictions | I love my job. I live my job. For every project I do, I try to make it look special. I’ll be honest: I have a fetish for comments like “I never saw anything like that!” or, “I wish I thought of that!”. I know, I have an ego-problem. (Eleven I’s already) But sometimes, you run out of inspiration. Happens to everybody, and everybody hates it. “I’m the worst designer in the world.” “Everything I designed before this was just pure luck!” No it wasn’t. Countless articles about finding inspiration have already been written. Great, but they’re not the magic potion you’d expect them to be when you need it. Here’s a list of small tips that can have immediate effect when applying them/using them. Main theme: Liberate yourself from the designers’ block by restricting yourself. Do’s Grids If you aren’t already using grids, you’re doing something wrong. Not only are they a great help for aligning your design, they also restrict you to certain widths and heights. (For more information about grids, I suggest you read Mark Boulton’s series on designing grid systems. Oh, he’s also publishing a book I think.) So what’s the link between grids and restrictions? Instead of having the option to style a piece of layout with a width of 1 to 960 pixels, you have to choose from values like 60 pixels, 140, 220, 300, … Start small Having a hard time finding a style for the layout, why don’t you start with one small object? No, not that small object, I meant a piece of a form, or a link, or try styling your headers (h1 – h6). Let’s take a submit button of a form: it’s small, but needs much attention. People will click it. People will hover it. Maybe sometimes it’s disabled? Also: a button needs to look like a button, so typically it requires more styling then a regular link. Once you’ve got the button, move on, following the button’s style. Color palettes There are lots of resources on the web for finding inspiration for color palettes. Some of the most famous are COLOURlovers, wear palettes and Adobe’s Kuler. Browse through them … | 2008 | Tim Van Damme | timvandamme | 2008-12-14T00:00:00+00:00 | https://24ways.org/2008/rocking-restrictions/ | process |
| 191 | 191 | CSS Animations | Friend: You should learn how to write CSS! Me: … Friend: CSS; Cascading Style Sheets. If you’re serious about web design, that’s the next thing you should learn. Me: What’s wrong with <font> tags? That was 8 years ago. Thanks to the hard work of Jeffrey, Andy, Andy, Cameron, Colly, Dan and many others, learning how to decently markup a website and write lightweight stylesheets was surprisingly easy. They made it so easy even a complete idiot (OH HAI) was able to quickly master it. And then… nothing. For a long time, it seemed like there wasn’t happening anything in the land of CSS, time stood still. Once you knew the basics, there wasn’t anything new to keep up with. It looked like a great band split, but people just kept re-releasing their music in various “Best Of!” or “Remastered!” albums. Fast forward a couple of years to late 2006. On the official WebKit blog Surfin’ Safari, there’s an article about something called CSS animations. Great new stuff to play with, but only supported by nightly builds (read: very, very beta) of WebKit. In the following months, they release other goodies, like CSS gradients, CSS reflections, CSS masks, and even more CSS animation sexiness. Whoa, looks like the band got back together, found their second youth, and went into overdrive! The problem was that if you wanted to listen to their new albums, you had to own some kind of new high-tech player no one on earth (besides some early adopters) owned. Back in the time machine. It is now late 2009, close to Christmas. Things have changed. Browsers supporting these new toys are widely available left and right. Even non-techies are using these advanced browsers to surf the web on a daily basis! Epic win? Almost, but at least this gives us enough reason to start learning how we could use all this new CSS voodoo. On Monday, Natalie Downe showed you a good tutorial on Going Nuts with CSS Transitions. Today, I’m taking it one step further… Howto: A basic spinner No matter how fast internet tubes or servers are, we’ll always need spi… | 2009 | Tim Van Damme | timvandamme | 2009-12-15T00:00:00+00:00 | https://24ways.org/2009/css-animations/ | code |
| 84 | 84 | Responsive Responsive Design | Now more than ever, we’re designing work meant to be viewed along a gradient of different experiences. Responsive web design offers us a way forward, finally allowing us to “design for the ebb and flow of things.” With those two sentences, Ethan closed the article that introduced the web to responsive design. Since then, responsive design has taken the web by storm. Seemingly every day, some company is touting their new responsive redesign. Large brands such as Microsoft, Time and Disney are getting in on the action, blowing away the once common criticism that responsive design was a technique only fit for small blogs. Certainly, this is a good thing. As Ethan and John Allsopp before him, were right to point out, the inherent flexibility of the web is a feature, not a bug. The web’s unique ability to be consumed and interacted with on any number of devices, with any number of input methods is something to be embraced. But there’s one part of the web’s inherent flexibility that seems to be increasingly overlooked: the ability for the web to be interacted with on any number of networks, with a gradient of bandwidth constraints and latency costs, on devices with varying degrees of hardware power. A few months back, Stephanie Rieger tweeted “Shoot me now…responsive design has seemingly become confused with an opportunity to reduce performance rather than improve it.” I would love to disagree, but unfortunately the evidence is damning. Consider the size and number of requests for four highly touted responsive sites that were launched this year: 74 requests, 1,511kb 114 requests, 1,200kb 99 requests, 1,298kb 105 requests, 5,942kb And those numbers were for the small screen versions of each site! These sites were praised for their visual design and responsive nature, and rightfully so. They’re very easy on the eyes and a lot of thought went into their appearance. But the numbers above tell an inconvenient truth: for all the time spent ensuring the visual design was airtight, seemingly very little (if… | 2012 | Tim Kadlec | timkadlec | 2012-12-05T00:00:00+00:00 | https://24ways.org/2012/responsive-responsive-design/ | design |
| 225 | 225 | Good Ideas Grow on Paper | Great designers have one thing in common: their design process is centred on ideas; ideas that are more often than not developed on paper. Though it’s often tempting to take the path of least resistance, turning to the computer in the headlong rush to complete a project (often in the face of formidable client pressure), resist the urge and – for a truly great idea – start first on paper. The path of least resistance is often characterised by cliché and overused techniques – one per cent noise, border-radius, text-shadow – the usual suspects – techniques that are ten-a-penny at the gallery sites. Whilst all are useful, and technique and craft are important, great design isn’t about technique alone – it’s about technique in the service of good ideas. But how do we generate those ideas? Inspiration can certainly come to you out of the blue. When working as a designer in a role which often consists of incubating good ideas, however, idly waiting for the time-honoured lightbulb to appear above your head just isn’t good enough. We need to establish an environment where we tip the odds of getting good ideas in our favour. So, when faced with the blank canvas, what do we do to unlock the proverbial tidal wave of creativity? Fear not. We’re about to share with you a couple of stalwart techniques that will stand you in good stead when you need that good idea, in the face of the pressure of yet another looming deadline. Get the process right Where do ideas come from? In many cases they come from anywhere but the screen. Hence, our first commandment is to close the lid of your computer and, for a change, work on paper. It might seem strange, it might also seem like a distraction, but – trust us – the time invested here will more than pay off. Idea generation should be a process of rapid iteration, sketching and thinking aloud, all processes best undertaken in more fast paced, analogue media. Our tool of choice is the Sharpie and Flip Chart Combo©, intentionally low resolution to encourage lo-fi idea generation. In sho… | 2010 | The Standardistas | thestandardistas | 2010-12-13T00:00:00+00:00 | https://24ways.org/2010/good-ideas-grow-on-paper/ | process |
| 196 | 196 | Designing a Remote Project | I came across an article recently, which I have to admit made my blood boil a little. Yes, I know it’s the season of goodwill and all that, and I’m going to risk sounding a little Scrooge-like, but I couldn’t help it. It was written by someone who’d tried out ‘telecommuting’ (big sigh) a.k.a. remote or distributed working. They’d tested it in their company and decided it didn’t work. Why did it enrage me so much? Well, this person sounded like they’d almost set it up to fail. To them, it was the latest buzzword, and they wanted to offer their employees a ‘perk’. But it was going to be risky, because, well, they just couldn’t trust their employees not to be lazy and sit around in their pyjamas at home, watching TV, occasionally flicking their mousepad to ‘appear online’. Sounds about right, doesn’t it? Well, no. This attitude towards remote working is baked in the past, where working from one office and people all sitting around together in a cosy circle singing kum-by-yah* was a necessity not an option. We all know the reasons remote working and flexibility can happen more easily now: fast internet, numerous communication channels, and so on. But why are companies like Yahoo! and IBM backtracking on this? Why is there still such a negative perception of this way of working when it has so much real potential for the future? *this might not have ever really happened in an office. So what is remote working? It can come in various formats. It’s actually not just the typical office worker, working from home on a specific day. The nature of digital projects has been changing over a number of years. In this era where organisations are squeezing budgets and trying to find the best value wherever they can, it seems that the days of whole projects being tackled by one team, in the same place, is fast becoming the past. What I’ve noticed more recently is a much more fragmented way of putting together a project – a mixture of in-house and agency, or multiple agencies or organisations, or working with an offshore team. In th… | 2017 | Suzanna Haworth | suzannahaworth | 2017-12-06T00:00:00+00:00 | https://24ways.org/2017/designing-a-remote-project/ | business |
| 198 | 198 | Is Your Website Accidentally Sexist? | Women make up 51% of the world’s population. More importantly, women make 85% of all purchasing decisions about consumer goods, 75% of the decisions about buying new homes, and 81% of decisions about groceries. The chances are, you want your website to be as attractive to women as it is to men. But we are all steeped in a male-dominated culture that subtly influences the design and content decisions we make, and some of those decisions can result in a website that isn’t as welcoming to women as it could be. Typography tells a story Studies show that we make consistent judgements about whether a typeface is masculine or feminine: Masculine typography has a square or geometric form with hard corners and edges, and is emphatically either blunt or spiky. Serif fonts are also considered masculine, as is bold type and capitals. Feminine typography favours slim lines, curling or flowing shapes with a lot of ornamentation and embellishment, and slanted letters. Sans-serif, cursive and script fonts are seen as feminine, as are lower case letters. The effect can be so subtle that even choosing between bold and regular styles within a single font family can be enough to indicate masculinity or femininity. If you want to appeal to both men and women, search for fonts that are gender neutral, or at least not too masculine. When you’re choosing groups of fonts that need to work harmoniously together, consider which fonts you are prioritising in your design. Is the biggest word on the page in a masculine or feminine font? What about the smallest words? Is there an imbalance between the prominence of masculine and feminine fonts, and what does this imply? Typography is a language in and of itself, so be careful what you say with it. Colour me unsurprised Colour also has an obvious gender bias. We associate pinks and purples, especially in combination, with girls and women, and a soft pink has become especially strongly related to breast cancer awareness campaigns. On the other hand, pale blue is strongly associated with boy… | 2017 | Suw Charman-Anderson | suwcharmananderson | 2017-12-20T00:00:00+00:00 | https://24ways.org/2017/is-your-website-accidentally-sexist/ | content |
| 202 | 202 | Design Systems and CSS Grid | Recently, my client has been looking at creating a few new marketing pages for their website. They currently have a design system in place but they’re looking to push this forward into 2018 with some small and possibly some larger changes. To start with we are creating a couple of new marketing pages. As well as making use of existing components within the design systems component library there are a couple of new components. Looking at the first couple of sketch files I felt this would be a great opportunity to use CSS Grid, to me the newer components need to be laid out on that page and grid would help with this perfectly. As well as this layout of the new components and the text within it, imagery would be used that breaks out of the grid and pushes itself into the spaces where the text is aligned. The existing grid system When the site was rebuilt in 2015 the team decided to make use of Sass and Susy, a “lightweight grid-layout engine using Sass”. It was built separating the grid system from the components that would be laid out on the page with a container, a row, an optional column, and a block. To make use of the grid system on a page for a component that would take the full width of the row you would have to write something like this: <div class="grid-container"> <div class="grid-row"> <div class="grid-column-4"> <div class="grid-block"> <!-- component code here --> </div> </div> </div> </div> Using a grid system similar to this can easily create quite the tag soup. It could fill the HTML full of divs that may become complex to understand and difficult to edit. Although there is this reliance on several <div>s to lay out the components on a page it does allow a tidy way to place the component code within that page. It abstracts the layout of the page to its own code, its own system, so the components can ‘fit’ where needed. The requirements of the new grid system Moving forward I set myself some goals for what I’d like to have achieved in this new grid system: It needs to… | 2017 | Stuart Robson | stuartrobson | 2017-12-12T00:00:00+00:00 | https://24ways.org/2017/design-systems-and-css-grid/ | code |
| 157 | 157 | Capturing Caps Lock | One of the more annoying aspects of having to remember passwords (along with having to remember loads of them) is that if you’ve got Caps Lock turned on accidentally when you type one in, it won’t work, and you won’t know why. Most desktop computers alert you in some way if you’re trying to enter your password to log on and you’ve enabled Caps Lock; there’s no reason why the web can’t do the same. What we want is a warning – maybe the user wants Caps Lock on, because maybe their password is in capitals – rather than something that interrupts what they’re doing. Something subtle. But that doesn’t answer the question of how to do it. Sadly, there’s no way of actually detecting whether Caps Lock is on directly. However, there’s a simple work-around; if the user presses a key, and it’s a capital letter, and they don’t have the Shift key depressed, why then they must have Caps Lock on! Simple. DOM scripting allows your code to be notified when a key is pressed in an element; when the key is pressed, you get the ASCII code for that key. Capital letters, A to Z, have ASCII codes 65 to 90. So, the code would look something like: on a key press if the ASCII code for the key is between 65 and 90 *and* if shift is pressed warn the user that they have Caps Lock on, but let them carry on end if end keypress The actual JavaScript for this is more complicated, because both event handling and keypress information differ across browsers. Your event handling functions are passed an event object, except in Internet Explorer where you use the global event object; the event object has a which parameter containing the ASCII code for the key pressed, except in Internet Explorer where the event object has a keyCode parameter; some browsers store whether the shift key is pressed in a shiftKey parameter and some in a modifiers parameter. All this boils down to code that looks something like this: keypress: function(e) { var ev = e ? e : window.event; if (!ev) { return; } var targ = ev.target ? ev.target : ev.srcElement; /… | 2007 | Stuart Langridge | stuartlangridge | 2007-12-04T00:00:00+00:00 | https://24ways.org/2007/capturing-caps-lock/ | code |
| 88 | 88 | Think First, Code Later | This is a story that’s best told from the end, and it’s probably one you’re all familiar with. You, or someone just like you, have been building a website, probably as part of a skilled and capable team. You’re a front-end developer, focusing on JavaScript – it’s either your sole responsibility or shared around. It’s quite a big job, been going on for months, and at last it feels like you’re reaching the end of it. But, in a brief moment of downtime, you step back and take a look at the code as a whole. You notice that the folder called “jQuery plugins” suddenly looks rather full, and maybe there’s evidence of several methods of doing the same thing; there are loads of little niggly fixes in the bug tracker; and every place you use Ajax the structure of the data is slightly different. You sigh, and your shoulders droop slightly, and you think “Yeah, we’ll do that more cleanly next time.” The thing is, you probably already know how to rewrite the start of this story to make the ending work better. This situation is not really anyone’s fault – it’s just an accumulation of all the things you decided along the way, all the things you agreed you’d fix later that have disappeared into the black hole of technical debt, and accomodating all the “can we just…?” requests from around the team and the client. So, the solution to this is easy, right? More interminable planning meetings, more tightly controlled and documented specifications, less freedom to innovate, to try out new ideas and enjoy what you’re doing. Wait, that sounds even less fun than the old way. Minimum viable planning Actually, planning and specifications are exactly what you need, but the way you go about them can make a real difference, both to the quality of your code, and the quality of your life as a developer. It can be as simple as being a little more thoughtful before starting on any new piece of functionality. Involve your whole team if possible, or at least those working on what you’re doing. Canvass opinions and work out what the solution… | 2012 | Stephen Fulljames | stephenfulljames | 2012-12-07T00:00:00+00:00 | https://24ways.org/2012/think-first-code-later/ | process |
| 201 | 201 | Lint the Web Forward With Sonarwhal | Years ago, when I was in a senior in college, much of my web development courses focused on two things: the basics like HTML and CSS (and boy, do I mean basic), and Adobe Flash. I spent many nights writing ActionScript 3.0 to build interactions for the websites that I would add to my portfolio. A few months after graduating, I built one website in Flash for a client, then never again. Flash was dying, and it became obsolete in my résumé and portfolio. That was my first lesson in the speed at which things change in technology, and what a daunting realization that was as a new graduate looking to enter the professional world. Now, seven years later, I work on the Microsoft Edge team where I help design and build a tool that would have lessened my early career anxieties: sonarwhal. Sonarwhal is a linting tool, built by and for the web community. The code is open source and lives under the JS Foundation. It helps web developers and designers like me keep up with the constant change in technology while simultaneously teaching how to code better websites. Introducing sonarwhal’s mascot Nellie Good web development is hard. It is more than HTML, CSS, and JavaScript: developers are expected to have a grasp of accessibility, performance, security, emerging standards, and more, all while refreshing this knowledge every few months as the web evolves. It’s a lot to keep track of. Web development is hard Staying up-to-date on all this knowledge is one of the driving forces for developing this scanning tool. Whether you are just starting out, are a student, or you have over a decade of experience, the sonarwhal team wants to help you build better websites for all browsers. Currently sonarwhal checks for best practices in five categories: Accessibility, Interoperability, Performance, PWAs, and Security. Each check is called a “rule”. You can configure them and even create your own rules if you need to follow some specific guidelines for your project (e.g. validate analytics attributes, title format of pages, etc.). You c… | 2017 | Stephanie Drescher | stephaniedrescher | 2017-12-02T00:00:00+00:00 | https://24ways.org/2017/lint-the-web-forward-with-sonarwhal/ | code |
| 203 | 203 | Jobs-to-Be-Done in Your UX Toolbox | Part 1: What is JTBD? The concept of a “job” in “Jobs-To-Be-Done” is neatly encapsulated by a oft-quoted line from Theodore Levitt: “People want a quarter-inch hole, not a quarter inch drill”. Even so, Don Norman pointed out that perhaps Levitt “stopped too soon” at what the real customer goal might be. In the “The Design of Everyday Things”, he wrote: “Levitt’s example of the drill implying that the goal is really a hole is only partially correct, however. When people go to a store to buy a drill, that is not their real goal. But why would anyone want a quarter-inch hole? Clearly that is an intermediate goal. Perhaps they wanted to hang shelves on the wall. Levitt stopped too soon. Once you realize that they don’t really want the drill, you realize that perhaps they don’t really want the hole, either: they want to install their bookshelves. Why not develop methods that don’t require holes? Or perhaps books that don’t require bookshelves.” In other words, a “job” in JTBD lingo is a way to express a user need or provide a customer-centric problem frame that’s independent of a solution. As Tony Ulwick says: “A job is stable, it doesn’t change over time.” An example of a job is “tiding you over from breakfast to lunch.” You could hire a donut, a flapjack or a banana for that mid-morning snack—whatever does the job. If you can arrive at a clearly identified primary job (and likely some secondary ones too), you can be more creative in how you come up with an effective solution while keeping the customer problem in focus. The team at Intercom wrote a book on their application of JTBD. In it, Des Traynor cleverly characterised how JTBD provides a different way to think about solutions that compete for the same job: “Economy travel and business travel are both capable candidates applying for [the job: Get me face-to-face with my colleague in San Francisco], though they’re looking for significantly different salaries. Video conferencing isn’t as capable, but is willing to work for a … | 2017 | Steph Troeth | stephtroeth | 2017-12-04T00:00:00+00:00 | https://24ways.org/2017/jobs-to-be-done-in-your-ux-toolbox/ | ux |
| 43 | 43 | Content Production Planning | While everyone agrees that getting the content of a website right is vital to its success, unless you’re lucky enough to have an experienced editor or content strategist on board, planning content production often seems to fall through the cracks. One reason is that, for most of the team, it feels like someone else’s problem. Not necessarily a specific person’s problem. Just someone else’s. It’s only when everyone starts urgently asking when the content is going to be ready, that it becomes clear the answer is, “Not as soon as we’d like it”. The good news is that there are some quick and simple things you can do, even if you’re not the official content person on a project, to get everyone on the same content planning page. Content production planning boils down to answering three deceptively simple questions: What content do you need? How much of it do you need? Who’s going to make it? Even if it’s not your job to come up with the answers, by asking these questions early enough and agreeing who is going to come up with the answers, you’ll be a long way towards avoiding the last-minute content problems which so often plague projects. How much content do we need? People tend to underestimate two crucial things about content: how much content they need, and how long that content takes to produce. When I ask someone how big their website is – how many pages it contains – I usually double or triple the answer I get. That’s because almost everyone’s mental model of their website greatly underestimates its true size. You can see the problem for yourself if you look at a site map. Site maps are great at representing a mental model of a website. But because they’re a deliberate simplification they naturally lead us to underestimate how much content is involved in populating them. Several years ago I was asked to help a client create a new microsite (their word) which they wanted ready in two weeks for a conference they were attending. Here’s the site map they had in mind. At first glance it looks like a pret… | 2014 | Sophie Dennis | sophiedennis | 2014-12-17T00:00:00+00:00 | https://24ways.org/2014/content-production-planning/ | content |
| 168 | 168 | Unobtrusively Mapping Microformats with jQuery | Microformats are everywhere. You can’t shake an electronic stick these days without accidentally poking a microformat-enabled site, and many developers use microformats as a matter of course. And why not? After all, why invent your own class names when you can re-use pre-defined ones that give your site extra functionality for free? Nevertheless, while it’s good to know that users of tools such as Tails and Operator will derive added value from your shiny semantics, it’s nice to be able to reuse that effort in your own code. We’re going to build a map of some of my favourite restaurants in Brighton. Fitting with the principles of unobtrusive JavaScript, we’ll start with a semantically marked up list of restaurants, then use JavaScript to add the map, look up the restaurant locations and plot them as markers. We’ll be using a couple of powerful tools. The first is jQuery, a JavaScript library that is ideally suited for unobtrusive scripting. jQuery allows us to manipulate elements on the page based on their CSS selector, which makes it easy to extract information from microformats. The second is Mapstraction, introduced here by Andrew Turner a few days ago. We’ll be using Google Maps in the background, but Mapstraction makes it easy to change to a different provider if we want to later. Getting Started We’ll start off with a simple collection of microformatted restaurant details, representing my seven favourite restaurants in Brighton. The full, unstyled list can be seen in restaurants-plain.html. Each restaurant listing looks like this: <li class="vcard"> <h3><a class="fn org url" href="http://www.riddleandfinns.co.uk/">Riddle & Finns</a></h3> <div class="adr"> <p class="street-address">12b Meeting House Lane</p> <p><span class="locality">Brighton</span>, <abbr class="country-name" title="United Kingdom">UK</abbr></p> <p class="postal-code">BN1 1HB</p> </div> <p>Telephone: <span class="tel">+44 (0)1273 323 008</span></p> <p>E-mail: <a href="mailto:info@riddleandfinns.co.uk" class="email">info@ri… | 2007 | Simon Willison | simonwillison | 2007-12-12T00:00:00+00:00 | https://24ways.org/2007/unobtrusively-mapping-microformats-with-jquery/ | code |
| 249 | 249 | Fast Autocomplete Search for Your Website | Every website deserves a great search engine - but building a search engine can be a lot of work, and hosting it can quickly get expensive. I’m going to build a search engine for 24 ways that’s fast enough to support autocomplete (a.k.a. typeahead) search queries and can be hosted for free. I’ll be using wget, Python, SQLite, Jupyter, sqlite-utils and my open source Datasette tool to build the API backend, and a few dozen lines of modern vanilla JavaScript to build the interface. Try it out here, then read on to see how I built it. First step: crawling the data The first step in building a search engine is to grab a copy of the data that you plan to make searchable. There are plenty of potential ways to do this: you might be able to pull it directly from a database, or extract it using an API. If you don’t have access to the raw data, you can imitate Google and write a crawler to extract the data that you need. I’m going to do exactly that against 24 ways: I’ll build a simple crawler using wget, a command-line tool that features a powerful “recursive” mode that’s ideal for scraping websites. We’ll start at the https://24ways.org/archives/ page, which links to an archived index for every year that 24 ways has been running. Then we’ll tell wget to recursively crawl the website, using the --recursive flag. We don’t want to fetch every single page on the site - we’re only interested in the actual articles. Luckily, 24 ways has nicely designed URLs, so we can tell wget that we only care about pages that start with one of the years it has been running, using the -I argument like this: -I /2005,/2006,/2007,/2008,/2009,/2010,/2011,/2012,/2013,/2014,/2015,/2016,/2017 We want to be polite, so let’s wait for 2 seconds between each request rather than hammering the site as fast as we can: --wait 2 The first time I ran this, I accidentally downloaded the comments pages as well. We don’t want those, so let’s exclude them from the crawl using -X "/*/*/comments". Finally, it’s useful to be able to run the command multiple times… | 2018 | Simon Willison | simonwillison | 2018-12-19T00:00:00+00:00 | https://24ways.org/2018/fast-autocomplete-search-for-your-website/ | code |
| 326 | 326 | Don't be eval() | JavaScript is an interpreted language, and like so many of its peers it includes the all powerful eval() function. eval() takes a string and executes it as if it were regular JavaScript code. It’s incredibly powerful and incredibly easy to abuse in ways that make your code slower and harder to maintain. As a general rule, if you’re using eval() there’s probably something wrong with your design. Common mistakes Here’s the classic misuse of eval(). You have a JavaScript object, foo, and you want to access a property on it – but you don’t know the name of the property until runtime. Here’s how NOT to do it: var property = 'bar'; var value = eval('foo.' + property); Yes it will work, but every time that piece of code runs JavaScript will have to kick back in to interpreter mode, slowing down your app. It’s also dirt ugly. Here’s the right way of doing the above: var property = 'bar'; var value = foo[property]; In JavaScript, square brackets act as an alternative to lookups using a dot. The only difference is that square bracket syntax expects a string. Security issues In any programming language you should be extremely cautious of executing code from an untrusted source. The same is true for JavaScript – you should be extremely cautious of running eval() against any code that may have been tampered with – for example, strings taken from the page query string. Executing untrusted code can leave you vulnerable to cross-site scripting attacks. What’s it good for? Some programmers say that eval() is B.A.D. – Broken As Designed – and should be removed from the language. However, there are some places in which it can dramatically simplify your code. A great example is for use with XMLHttpRequest, a component of the set of tools more popularly known as Ajax. XMLHttpRequest lets you make a call back to the server from JavaScript without refreshing the whole page. A simple way of using this is to have the server return JavaScript code which is then passed to eval(). Here is a simple function for doing exactly that … | 2005 | Simon Willison | simonwillison | 2005-12-07T00:00:00+00:00 | https://24ways.org/2005/dont-be-eval/ | code |
| 230 | 230 | The Articulate Web Designer of Tomorrow | You could say that we design to communicate, and that we seek emotive responses. It sounds straightforward, and it can be, but leaving it to chance isn’t wise. Many wander into web design without formal training, and whilst that certainly isn’t essential, we owe it to ourselves to draw on wider influences, learn from the past, and think smarter. What knowledge can we ourselves explore in order to become better designers? In addition, how can we take this knowledge, investigate it through our unique discipline, and in turn speak more eloquently about what we do on the web? Below, I outline a number of things that I personally believe all designers should be using and exploring collectively. Taking stock Where we’re at is good. Finding clarity through web standards, we’ve ended up quite modernist in our approach, pursuing function, elegance and reduction. However, we’re not great at articulating our own design processes and principles to outsiders. Equally, we rely heavily on our instincts when deciding if something is or isn’t good. That’s fine, but we can better understand why things are the way they are by looking a little deeper, thereby helping us articulate what goes on in our design brains to our peers, our clients and to normal humans. As designers we use ideas, concepts, text and images. We apply our ideas and experience, imposing order and structure to content, hoping to ease the communication of an idea to the largest possible audience or to a specific audience. We consciously manipulate most of what is available to us, but not all. There is something else we can use. I often think that brilliant work demands a keen understanding of the magical visual language that informs design. Embracing an established visual language This is a language whose alphabet is shapes, structures, colours, lines and rhythms. When effective, it is somewhat invisible, subliminally enforcing messages and evoking meaning, using methods solidly rooted in a grammar perceptible in virtually all extraordinary creative work. Th… | 2010 | Simon Collison | simoncollison | 2010-12-16T00:00:00+00:00 | https://24ways.org/2010/the-articulate-web-designer-of-tomorrow/ | process |
| 267 | 267 | Taming Complexity | I’m going to step into my UX trousers for this one. I wouldn’t usually wear them in public, but it’s Christmas, so there’s nothing wrong with looking silly. Anyway, to business. Wherever I roam, I hear the familiar call for simplicity and the denouncement of complexity. I read often that the simpler something is, the more usable it will be. We understand that simple is hard to achieve, but we push for it nonetheless, convinced it will make what we build easier to use. Simple is better, right? Well, I’ll try to explore that. Much of what follows will not be revelatory to some but, like all good lessons, I think this serves as a welcome reminder that as we live in a complex world it’s OK to sometimes reflect that complexity in the products we build. Myths and legends Less is more, we’ve been told, ever since master of poetic verse Robert Browning used the phrase in 1855. Well, I’ve conducted some research, and it appears he knew nothing of web design. Neither did modernist architect Ludwig Mies van der Rohe, a later pedlar of this worthy yet contradictory notion. Broad is narrow. Tall is short. Eggs are chips. See: anyone can come up with this stuff. To paraphrase Einstein, simple doesn’t have to be simpler. In other words, simple doesn’t dictate that we remove the complexity. Complex doesn’t have to be confusing; it can be beautiful and elegant. On the web, complex can be necessary and powerful. A website that simplifies the lives of its users by offering them everything they need in one site or screen is powerful. For some, the greater the density of information, the more useful the site. In our decision-making process, principles such as Occam’s razor’s_razor (in a nutshell: simple is better than complex) are useful, but simple is for the user to determine through their initial impression and subsequent engagement. What appears simple to me or you might appear very complex to someone else, based on their own mental model or needs. We can aim to deliver simple, but they’ll be the judge. As a designer, deve… | 2011 | Simon Collison | simoncollison | 2011-12-21T00:00:00+00:00 | https://24ways.org/2011/taming-complexity/ | ux |
| 328 | 328 | Swooshy Curly Quotes Without Images | The problem Take a quote and render it within blockquote tags, applying big, funky and stylish curly quotes both at the beginning and the end without using any images – at all. The traditional way Feint background images under the text, or an image in the markup housed in a little float. Often designers only use the opening curly quote as it’s just too difficult to float a closing one. Why is the traditional way bad? Well, for a start there are no actual curly quotes in the text (unless you’re doing some nifty image replacement). Thus with CSS disabled you’ll only have default blockquote styling to fall back on. Secondly, images don’t resize, so scaling text will have no affect on your graphic curlies. The solution Use really big text. Then it can be resized by the browser, resized using CSS, and even be restyled with a new font style if you fancy it. It’ll also make sense when CSS is unavailable. The problem Creating “Drop Caps” with CSS has been around for a while (Big Dan Cederholm discusses a neat solution in that first book of his), but drop caps are normal characters – the A to Z or 1 to 10 – and these can all be pulled into a set space and do not serve up a ton of whitespace, unlike punctuation characters. Curly quotes aren’t like traditional characters. Like full stops, commas and hashes they float within the character space and leave lots of dead white space, making it bloody difficult to manipulate them with CSS. Styles generally fit around text, so cutting into that character is tricky indeed. Also, all that extra white space is going to push into the quote text and make it look pretty uneven. This grab highlights the actual character space: See how this is emphasized when we add a normal alphabetical character within the span. This is what we’re dealing with here: Then, there’s size. Call in a curly quote at less than 300% font-size and it ain’t gonna look very big. The white space it creates will be big enough, but the curlies will be way too small. We need more like 700% (as in this … | 2005 | Simon Collison | simoncollison | 2005-12-21T00:00:00+00:00 | https://24ways.org/2005/swooshy-curly-quotes-without-images/ | business |
| 34 | 34 | Collaborative Responsive Design Workflows | Much has been written about workflow and designer-developer collaboration in web design, but many teams still struggle with this issue; either with how to adapt their internal workflow, or how to communicate the need for best practices like mobile first and progressive enhancement to their teams and clients. Christmas seems like a good time to have another look at what doesn’t work between us and how we can improve matters. Why is it so difficult? We’re still beginning to understand responsive design workflows, acknowledging the need to move away from static design tools and towards best practices in development. It’s not that we don’t want to change – so why is it so difficult? Changing the way we do something that has become routine is always problematic, even with small things, and the changes today’s web environment requires from web design and development teams are anything but small. Although developers also have a host of new skills to learn and things to consider, designers are probably the ones pushed furthest out of their comfort zones: as well as graphic design, a web designer today also needs an understanding of interaction design and ergonomics, because more and more websites are becoming tools rather than pages meant to be read like a book or magazine. In addition to that there are thousands of different devices and screen sizes on the market today that layout and interactions need to work on. These aspects make it impossible to design in a static design tool, so beyond having to learn about new aspects of design, the designer has to either learn how to code or learn to work with a responsive design tool. Why do it That alone is enough to leave anyone overwhelmed, as learning a new skill takes time and slows you down in a project – and on most projects time is in short supply. Yet we have to make time or fall behind in the industry as others pitch better, interactive designs. For an efficient workflow, both designers and developers must familiarise themselves with new tools and techniques. A… | 2014 | Sibylle Weber | sibylleweber | 2014-12-07T00:00:00+00:00 | https://24ways.org/2014/collaborative-responsive-design-workflows/ | process |
| 129 | 129 | Knockout Type - Thin Is Always In | OS X has gorgeous native anti-aliasing (although I will admit to missing 10px aliased Geneva — *sigh*). This is especially true for dark text on a light background. However, things can go awry when you start using light text on a dark background. Strokes thicken. Counters constrict. Letterforms fill out like seasonal snackers. So how do we combat the fat? In Safari and other Webkit-based browsers we can use the CSS ‘text-shadow’ property. While trying to add a touch more contrast to the navigation on haveamint.com I noticed an interesting side-effect on the weight of the type. The second line in the example image above has the following style applied to it: This creates an invisible drop-shadow. (Why is it invisible? The shadow is positioned directly behind the type (the first two zeros) and has no spread (the third zero). So the color, black, is completely eclipsed by the type it is supposed to be shadowing.) Why applying an invisible drop-shadow effectively lightens the weight of the type is unclear. What is clear is that our light-on-dark text is now of a comparable weight to its dark-on-light counterpart. You can see this trick in effect all over ShaunInman.com and in the navigation on haveamint.com and Subtraction.com. The HTML and CSS source code used to create the example images used in this article can be found here. | 2006 | Shaun Inman | shauninman | 2006-12-17T00:00:00+00:00 | https://24ways.org/2006/knockout-type/ | code |
| 316 | 316 | Have Your DOM and Script It Too | When working with the XMLHttpRequest object it appears you can only go one of three ways: You can stay true to the colorful moniker du jour and stick strictly to the responseXML property You can play with proprietary – yet widely supported – fire and inject the value of responseText property into the innerHTML of an element of your choosing Or you can be eval() and parse JSON or arbitrary JavaScript delivered via responseText But did you know that there’s a fourth option giving you the best of the latter two worlds? Mint uses this unmentioned approach to grab fresh HTML and run arbitrary JavaScript simultaneously. Without relying on eval(). “But wait-”, you might say, “when would I need to do this?” Besides the example below this technique is handy for things like tab groups that need initialization onload but miss the main onload event handler by a mile thanks to asynchronous scripting. Consider the problem Originally Mint used option 2 to refresh or load new tabs into individual Pepper panes without requiring a full roundtrip to the server. This was all well and good until I introduced the new Client Mode which when enabled allows anyone to view a Mint installation without being logged in. If voyeurs are afoot as Client Mode is disabled, the next time they refresh a pane the entire login page is inserted into the current document. That’s not very helpful so I needed a way to redirect the current document to the login page. Enter the solution Wouldn’t it be cool if browsers interpreted the contents of script tags crammed into innerHTML? Sure, but unfortunately, that just wasn’t meant to be. However like the body element, image elements have an onload event handler. When the image has fully loaded the handler runs the code applied to it. See where I’m going with this? By tacking a tiny image (think single pixel, transparent spacer gif – shudder) onto the end of the HTML returned by our Ajax call, we can smuggle our arbitrary JavaScript into the existing document. The image is added to the DOM, and … | 2005 | Shaun Inman | shauninman | 2005-12-24T00:00:00+00:00 | https://24ways.org/2005/have-your-dom-and-script-it-too/ | code |
| 27 | 27 | Putting Design on the Map | The web can leave us feeling quite detached from the real world. Every site we make is really just a set of abstract concepts manifested as tools for communication and expression. At any minute, websites can disappear, overwritten by a newfangled version or simply gone. I think this is why so many of us have desires to create a product, write a book, or play with the internet of things. We need to keep in touch with the physical world and to prove (if only to ourselves) that we do make real things. I could go on and on about preserving the web, the challenges of writing a book, or thoughts about how we can deal with the need to make real things. Instead, I’m going to explore something that gives us a direct relationship between a website and the physical world – maps. A map does not just chart, it unlocks and formulates meaning; it forms bridges between here and there, between disparate ideas that we did not know were previously connected. Reif Larsen, The Selected Works of T.S. Spivet The simplest form of map on a website tends to be used for showing where a place is and often directions on how to get to it. That’s an incredibly powerful tool. So why is it, then, that so many sites just plonk in a default Google Map and leave it as that? You wouldn’t just use dark grey Helvetica on every site, would you? Where’s the personality? Where’s the tailored experience? Where is the design? Jumping into design Let’s keep this simple – we all want to be better web folk, not cartographers. We don’t need to go into the history, mathematics or technology of map making (although all of those areas are really interesting to research). For the sake of our sanity, I’m going to gloss over some of the technical areas and focus on the practical concepts. Tiles If you’ve ever noticed a map loading in sections, it’s because it uses tiles that are downloaded individually instead of requiring the user to download everything that they might need. These tiles come in many styles and can be used for anything that covers large ar… | 2014 | Shane Hudson | shanehudson | 2014-12-11T00:00:00+00:00 | https://24ways.org/2014/putting-design-on-the-map/ | design |
| 298 | 298 | First Steps in VR | The web is all around us. As web folk, it is our responsibility to consider the impact our work can have. Part of this includes thinking about the future; the web changes lives and if we are building the web then we are the ones making decisions that affect people in every corner of the world. I find myself often torn between wanting to make the right decisions, and just wanting to have fun. To fiddle and play. We all know how important it is to sometimes just try ideas, whether they will amount to much or not. I think of these two mindsets as production and prototyping, though of course there are lots of overlap and phases in between. I mention this because virtual reality is currently seen as a toy for rich people, and in some ways at the moment it is. But with WebVR we are able to create interesting experiences with a relatively low entry point. I want us to have open minds, play around with things, and then see how we can use the tools we have at our disposal to make things that will help people. Every year we see articles saying it will be the “year of virtual reality”, that was especially prevalent this year. 2016 has been a year of progress, VR isn’t quite mainstream but with efforts like Playstation VR and Google Cardboard, we are definitely seeing much more of it. This year also saw the consumer editions of the Oculus Rift and HTC Vive. So it does seem to be a good time for an overview of how to get involved with creating virtual reality on the web. WebVR is an API for connecting to devices and retrieving continuous data such as the position and orientation. Unlike the Web Audio API and some other APIs, WebVR does not feel like a framework. You use it however you want, taking the data and using it as you wish. To make it easier, there are plenty of resources such as Three.js, A-Frame and ReactVR that help to make the heavy lifting a bit easier. Getting Started with A-Frame I like taking the opportunity to learn new things whenever I can. So while planning this article I thought that instead of trying to… | 2016 | Shane Hudson | shanehudson | 2016-12-11T00:00:00+00:00 | https://24ways.org/2016/first-steps-in-vr/ | code |
| 211 | 211 | Automating Your Accessibility Tests | Accessibility is one of those things we all wish we were better at. It can lead to a bunch of questions like: how do we make our site better? How do we test what we have done? Should we spend time each day going through our site to check everything by hand? Or just hope that everyone on our team has remembered to check their changes are accessible? This is where automated accessibility tests can come in. We can set up automated tests and have them run whenever someone makes a pull request, and even alongside end-to-end tests, too. Automated tests can’t cover everything however; only 20 to 50% of accessibility issues can be detected automatically. For example, we can’t yet automate the comparison of an alt attribute with an image’s content, and there are some screen reader tests that need to be carried out by hand too. To ensure our site is as accessible as possible, we will still need to carry out manual tests, and I will cover these later. First, I’m going to explain how I implemented automated accessibility tests on Elsevier’s ecommerce pages, and share some of the lessons I learnt along the way. Picking the right tool One of the hardest, but most important parts of creating our automated accessibility tests was choosing the right tool. We began by investigating aXe CLI, but soon realised it wouldn’t fit our requirements. It couldn’t check pages that required a visitor to log in, so while we could test our product pages, we couldn’t test any customer account pages. Instead we moved over to Pa11y. Its beforeScript step meant we could log into the site and test pages such as the order history. The example below shows the how the beforeScript step completes a login form and then waits for the login to complete before testing the page: beforeScript: function(page, options, next) { // An example function that can be used to make sure changes have been confirmed before continuing to run Pa11y function waitUntil(condition, retries, waitOver) { page.evaluate(condition, function(err, result) { if (result … | 2017 | Seren Davies | serendavies | 2017-12-07T00:00:00+00:00 | https://24ways.org/2017/automating-your-accessibility-tests/ | code |
| 295 | 295 | Internet of Stranger Things | This year I’ve been running a workshop about using JavaScript and Node.js to work with all different kinds of electronics on the Raspberry Pi. So especially for 24 ways I’m going to show you how I made a very special Raspberry Pi based internet connected project! And nothing says Christmas quite like a set of fairy lights connected to another dimension1. What you’ll see You can rig up the fairy lights in your home, with the scrawly letters written under each one. The people from the other side (i.e. the internet) will be able to write messages to you from their browser in real time. In fact why not try it now; check this web page. When you click the lights in your browser, my lights (and yours) will turn on and off in real life! (There may be a queue if there are lots of people accessing it, hit the “Send a message” button and wait your turn.) It’s all done with JavaScript, using Node.js running on both the Raspberry Pi and on the server. I’m using WebSockets to communicate in real time between the browser, server and Raspberry Pi. What you’ll need Raspberry Pi any of the following models: Zero (will need straight male header pins soldered2 and Micro USB OTG adaptor), A+, B+, 2, or 3 Micro SD card at least 4Gb Class 10 speed3 Micro USB power supply at least 2A USB Wifi dongle (unless you have a Pi 3 - that has wifi built in). Addressable fairy lights Logic level shifter (with pins soldered unless you want to do it!) Breadboard Jumper wires (3x male to male and 4x female to male) Optional but recommended Base board to hold the Pi and Breadboard (often comes with a breadboard!) Find links for where to buy all of these items that goes along with this tutorial. The total price should be around $1004. Setting up the Raspberry Pi You’ll need to install the SD card for the Raspberry Pi. You’ll find a link to download a disk image on the support document, ready-made with the Raspbian version of Linux, along with Node.js and all the files you need. Download it and write it to the SD card using the fantastic free … | 2016 | Seb Lee-Delisle | sebleedelisle | 2016-12-01T00:00:00+00:00 | https://24ways.org/2016/internet-of-stranger-things/ | code |
| 221 | 221 | “Probably, Maybe, No”: The State of HTML5 Audio | With the hype around HTML5 and CSS3 exceeding levels not seen since 2005’s Ajax era, it’s worth noting that the excitement comes with good reason: the two specifications render many years of feature hacks redundant by replacing them with native features. For fun, consider how many CSS2-based rounded corners hacks you’ve probably glossed over, looking for a magic solution. These days, with CSS3, the magic is border-radius (and perhaps some vendor prefixes) followed by a coffee break. CSS3’s border-radius, box-shadow, text-shadow and gradients, and HTML5’s <canvas>, <audio> and <video> are some of the most anticipated features we’ll see put to creative (ab)use as adoption of the ‘new shiny’ grows. Developers jumping on the cutting edge are using subsets of these features to little detriment, in most cases. The more popular CSS features are design flourishes that can degrade nicely, but the current audio and video implementations in particular suffer from a number of annoyances. The new shiny: how we got here Sound involves one of the five senses, a key part of daily life for most – and yet it has been strangely absent from HTML and much of the web by default. From a simplistic perspective, it seems odd that HTML did not include support for the full multimedia experience earlier, despite the CD-ROM-based craze of the early 1990s. In truth, standards like HTML can take much longer to bake, but eventually deliver the promise of a lowered barrier to entry, consistent implementations and shiny new features now possible ‘for free’ just about everywhere. <img> was introduced early and naturally to HTML, despite having some opponents at the time. Perhaps <audio> and <video> were avoided, given the added technical complexity of decoding various multi-frame formats, plus the hardware and bandwidth limitations of the era. Perhaps there were quarrels about choosing a standard format or – more simply – maybe these elements just weren’t considered to be applicable to the HTML-based web at the time. In any event, browser plug… | 2010 | Scott Schiller | scottschiller | 2010-12-08T00:00:00+00:00 | https://24ways.org/2010/the-state-of-html5-audio/ | code |
| 255 | 255 | Inclusive Considerations When Restyling Form Controls | I would like to begin by saying 2018 was the year that we, as developers, visual designers, browser implementers, and inclusive design and experience specialists rallied together and achieved a long-sought goal: We now have the ability to fully style form controls, across all modern browsers, while retaining their ease of declaration, native functionality and accessibility. I would like to begin by saying all these things. However, they’re not true. I think we spent the year debating about what file extension CSS should be written in, or something. Or was that last year? Maybe I’m thinking of next year. Returning to reality, styling form controls is more tricky and time consuming these days rather than flat out “hard”. In fact, depending on the length of the styling-leash a particular browser provides, there are controls you can style quite a bit. As for browsers with shorter leashes, there are other options to force their controls closer to the visual design you’re tasked to match. However, when striving for custom styled controls, one must be careful not to forget about the inherent functionality and accessibility that many provide. People expect and deserve the products and services they use and pay for to work for them. If these services are visually pleasing, but only function for those who fit the handful of personas they’ve been designed for, then we’ve potentially deprived many people the experiences they deserve. Quick level setting Getting down to brass tacks, when creating custom styled form controls that should retain their expected semantics and functionality, we have to consider the following: Many form elements can be styled directly through standard and browser specific selectors, as well as through some clever styling of markup patterns. We should leverage these native options before reinventing any wheels. It is important to preserve the underlying semantics of interactive controls. We must not unintentionally exclude people who use assistive technologies (ATs) that rely on these semantics. Ma… | 2018 | Scott O'Hara | scottohara | 2018-12-13T00:00:00+00:00 | https://24ways.org/2018/inclusive-considerations-when-restyling-form-controls/ | code |
| 276 | 276 | Your jQuery: Now With 67% Less Suck | Fun fact: more websites are now using jQuery than Flash. jQuery is an amazing tool that’s made JavaScript accessible to developers and designers of all levels of experience. However, as Spiderman taught us, “with great power comes great responsibility.” The unfortunate downside to jQuery is that while it makes it easy to write JavaScript, it makes it easy to write really really f*&#ing bad JavaScript. Scripts that slow down page load, unresponsive user interfaces, and spaghetti code knotted so deep that it should come with a bottle of whiskey for the next sucker developer that has to work on it. This becomes more important for those of us who have yet to move into the magical fairy wonderland where none of our clients or users view our pages in Internet Explorer. The IE JavaScript engine moves at the speed of an advancing glacier compared to more modern browsers, so optimizing our code for performance takes on an even higher level of urgency. Thankfully, there are a few very simple things anyone can add into their jQuery workflow that can clear up a lot of basic problems. When undertaking code reviews, three of the areas where I consistently see the biggest problems are: inefficient selectors; poor event delegation; and clunky DOM manipulation. We’ll tackle all three of these and hopefully you’ll walk away with some new jQuery batarangs to toss around in your next project. Selector optimization Selector speed: fast or slow? Saying that the power behind jQuery comes from its ability to select DOM elements and act on them is like saying that Photoshop is a really good tool for selecting pixels on screen and making them change color – it’s a bit of a gross oversimplification, but the fact remains that jQuery gives us a ton of ways to choose which element or elements in a page we want to work with. However, a surprising number of web developers are unaware that all selectors are not created equal; in fact, it’s incredible just how drastic the performance difference can be between two selectors that, at first g… | 2011 | Scott Kosman | scottkosman | 2011-12-13T00:00:00+00:00 | https://24ways.org/2011/your-jquery-now-with-less-suck/ | code |
| 277 | 277 | Raising the Bar on Mobile | One of the primary challenges of designing for mobile devices is that screen real estate is often in limited supply. Through the advocacy of Luke W and others, we’ve drawn comfort from the idea that this constraint ends up benefiting users and designers alike, from obvious advantages like portability and reach, to influencing our content strategy decisions through focus and restraint. But that doesn’t mean we shouldn’t take advantage of every last pixel of that screen we can snag! As anyone who has designed a website for use on a smartphone can attest, there’s an awful lot of space on mobile screens dedicated to browser functions that would be better off toggled out of view. Unfortunately, the visibility of some of these elements is beyond our control, such as the buttons fixed to the bottom of the viewport in iOS’s Safari and the WebOS browser. However, in many devices, the address bar at the top can be manually hidden, and its absence frees up enough pixel room for a large, impactful heading, a critical piece of navigation, or even just a little more white space to air things out. So, as my humble contribution to this most festive of web publications, today I’ll dig into the approach I used to hide the address bar in a browser-agnostic fashion for sites like BostonGlobe.com, and the jQuery Mobile framework. Surveying the land First, let’s assess the chromes of some popular, current mobile browsers. For example purposes, the following screen-captures feature the homepage of the Boston Globe site, without any address-bar-hiding logic in place. Note: these captures are just mockups – actual experience on these platforms may vary. On the left is iOS5’s Safari (running on iPhone), and on the right is Windows Phone 7 (pre-Mango). BlackBerry 7 (left), and Android 2.3 (right). WebOS (left), Opera Mini (middle), and Opera Mobile (right). Some browsers, such the default browsers on WebOS and BlackBerry 5, hide the bar automatically without any developer intervention, but many of them don’t. Of these, we can o… | 2011 | Scott Jehl | scottjehl | 2011-12-20T00:00:00+00:00 | https://24ways.org/2011/raising-the-bar-on-mobile/ | design |
| 231 | 231 | Designing for iOS: Life Beyond Media Queries | Although not a new phenomenon, media queries seem to be getting a lot attention online recently and for the right reasons too – it’s great to be able to adapt a design with just a few lines of CSS – but many people are relying only on them to create an iPhone-specific version of their website. I was pleased to hear at FOWD NYC a few weeks ago that both myself and Aral Balkan share the same views on why media queries aren’t always going to be the best solution for mobile. Both of us specialise in iPhone design ourselves and we opt for a different approach to media queries. The trouble is, regardless of what you have carefully selected to be display:none; in your CSS, the iPhone still loads everything in the background; all that large imagery for your full scale website also takes up valuable mobile bandwidth and time. You can greatly increase the speed of your website by creating a specific site tailored to mobile users with just a few handy pointers – media queries, in some instances, might be perfectly suitable but, in others, here’s what you can do. Redirect your iPhone/iPod Touch users To detect whether someone is viewing your site on an iPhone or iPod Touch, you can either use JavaScript or PHP. The JavaScript if((navigator.userAgent.match(/iPhone/i)) || (navigator.userAgent.match(/iPod/i))) { if (document.cookie.indexOf("iphone_redirect=false") == -1) window.location = "http://mobile.yoursitehere.com"; } The PHP if(strstr($_SERVER['HTTP_USER_AGENT'],'iPhone') || strstr($_SERVER['HTTP_USER_AGENT'],'iPod')) { header('Location: http://mobile.yoursitehere.com'); exit(); } Both of these methods redirect the user to a site that you have made specifically for the iPhone. At this point, be sure to provide a link to the full version of the website, in case the user wishes to view this and not be thrown into an experience they didn’t want, with no way back. Tailoring your site So, now you’ve got 320 × 480 pixels of screen to play with – and to create a style sheet for, just as you would fo… | 2010 | Sarah Parmenter | sarahparmenter | 2010-12-17T00:00:00+00:00 | https://24ways.org/2010/life-beyond-media-queries/ | code |
| 296 | 296 | Animation in Design Systems | Our modern front-end workflow has matured over time to include design systems and component libraries that help us stay organized, improve workflows, and simplify maintenance. These systems, when executed well, ensure proper documentation of the code available and enable our systems to scale with reduced communication conflicts. But while most of these systems take a critical stance on fonts, colors, and general building blocks, their treatment of animation remains disorganized and ad-hoc. Let’s leverage existing structures and workflows to reduce friction when it comes to animation and create cohesive and performant user experiences. Understand the importance of animation Part of the reason we treat animation like a second-class citizen is that we don’t really consider its power. When users are scanning a website (or any environment or photo), they are attempting to build a spatial map of their surroundings. During this process, nothing quite commands attention like something in motion. We are biologically trained to notice motion: evolutionarily speaking, our survival depends on it. For this reason, animation when done well can guide your users. It can aid and reinforce these maps, and give us a sense that we understand the UX more deeply. We retrieve information and put it back where it came from instead of something popping in and out of place. “Where did that menu go? Oh it’s in there.” For a deeper dive into how animation can connect disparate states, I wrote about the Importance of Context-Shifting in UX Patterns for CSS-Tricks. An animation flow on mobile. Animation also aids in perceived performance. Viget conducted a study where they measured user engagement with a standard loading GIF versus a custom animation. Customers were willing to wait almost twice as long for the custom loader, even though it wasn’t anything very fancy or crazy. Just by showing their users that they cared about them, they stuck around, and the bounce rates dropped. 14 second generic loading screen.22 second custom loadin… | 2016 | Sarah Drasner | sarahdrasner | 2016-12-16T00:00:00+00:00 | https://24ways.org/2016/animation-in-design-systems/ | code |
| 42 | 42 | An Overview of SVG Sprite Creation Techniques | SVG can be used as an icon system to replace icon fonts. The reasons why SVG makes for a superior icon system are numerous, but we won’t be going over them in this article. If you don’t use SVG icons and are interested in knowing why you may want to use them, I recommend you check out “Inline SVG vs Icon Fonts” by Chris Coyier – it covers the most important aspects of both systems and compares them with each other to help you make a better decision about which system to choose. Once you’ve made the decision to use SVG instead of icon fonts, you’ll need to think of the best way to optimise the delivery of your icons, and ways to make the creation and use of icons faster. Just like bitmaps, we can create image sprites with SVG – they don’t look or work exactly alike, but the basic concept is pretty much the same. There are several ways to create SVG sprites, and this article will give you an overview of three of them. While we’re at it, we’re going to take a look at some of the available tools used to automate sprite creation and fallback for us. Prerequisites The content of this article assumes you are familiar with SVG. If you’ve never worked with SVG before, you may want to look at some of the introductory tutorials covering SVG syntax, structure and embedding techniques. I recommend the following: SVG basics: Using SVG. Structure: Structuring, Grouping, and Referencing in SVG — The <g>, <use>, <defs> and <symbol> Elements. We’ll mention <use> and <symbol> quite a bit in this article. Embedding techniques: Styling and Animating SVGs with CSS. The article covers several topics, but the section linked focuses on embedding techniques. A compendium of SVG resources compiled by Chris Coyier — contains resources to almost every aspect of SVG you might be interested in. And if you’re completely new to the concept of spriting, Chris Coyier’s CSS Sprites explains all about them. Another important SVG feature is the viewBox attribute. For some of the techniques, knowing your way around this attribute is … | 2014 | Sara Soueidan | sarasoueidan | 2014-12-16T00:00:00+00:00 | https://24ways.org/2014/an-overview-of-svg-sprite-creation-techniques/ | code |
| 30 | 30 | Making Sites More Responsive, Responsibly | With digital projects we’re used to shifting our thinking to align with our target audience. We may undertake research, create personas, identify key tasks, or observe usage patterns, with our findings helping to refine our ongoing creations. A product’s overall experience can make or break its success, and when it comes to defining these experiences our development choices play a huge role alongside more traditional user-focused activities. The popularisation of responsive web design is a great example of how we are able to shape the web’s direction through using technology to provide better experiences. If we think back to the move from table-based layouts to CSS, initially our clients often didn’t know or care about the difference in these approaches, but we did. Responsive design was similar in this respect – momentum grew through the web industry choosing to use an approach that we felt would give a better experience, and which was more future-friendly. We tend to think of responsive design as a means of displaying content appropriately across a range of devices, but the technology and our implementation of it can facilitate much more. A responsive layout not only helps your content work when the newest smartphone comes out, but it also ensures your layout suitably adapts if a visually impaired user drastically changes the size of the text. The 24 ways site at 400% on a Retina MacBook Pro displays a layout more typically used for small screens. When we think more broadly, we realise that our technical choices and approaches to implementation can have knock-on effects for the greater good, and beyond our initial target audiences. We can make our experiences more responsive to people’s needs, enhancing their usability and accessibility along the way. Being responsibly responsive Of course, when we think about being more responsive, there’s a fine line between creating useful functionality and becoming intrusive and overly complex. In the excellent Responsible Responsive Design, Scott Jehl states that: … | 2014 | Sally Jenkinson | sallyjenkinson | 2014-12-10T00:00:00+00:00 | https://24ways.org/2014/making-sites-more-responsive-responsibly/ | code |
| 57 | 57 | Cooking Up Effective Technical Writing | Merry Christmas! May your preparations for this festive season of gluttony be shaping up beautifully. By the time you read this I hope you will have ordered your turkey, eaten twice your weight in Roses/Quality Street (let’s not get into that argument), and your Christmas cake has been baked and is now quietly absorbing regular doses of alcohol. Some of you may be reading this and scoffing Of course! I’ve also made three batches of mince pies, a seasonal chutney and enough gingerbread men to feed the whole street! while others may be laughing Bake? Oh no, I can’t cook to save my life. For beginners, recipes are the step-by-step instructions that hand-hold us through the cooking process, but even as a seasoned expert you’re likely to refer to a recipe at some point. Recipes tell us what we need, what to do with it, in what order, and what the outcome will be. It’s the documentation behind our ideas, and allows us to take the blueprint for a tasty morsel and to share it with others so they can recreate it. In fact, this is a little like the open source documentation and tutorials that we put out there, similarly aiming to guide other developers through our creations. The ‘just’ification of documentation Lately it feels like we’re starting to consider the importance of our words, and the impact they can have on others. Brad Frost warned us of the dangers of “Just” when it comes to offering up solutions to queries: “Just use this software/platform/toolkit/methodology…” “Just” makes me feel like an idiot. “Just” presumes I come from a specific background, studied certain courses in university, am fluent in certain technologies, and have read all the right books, articles, and resources. “Just” is a dangerous word. “Just” by Brad Frost I can really empathise with these sentiments. My relationship with code started out as many good web tales do, with good old HTML, CSS and JavaScript. University years involved some time with Perl, PHP, Java and C. In my first job I worked primarily with ColdFusion, a bit of ActionScri… | 2015 | Sally Jenkinson | sallyjenkinson | 2015-12-18T00:00:00+00:00 | https://24ways.org/2015/cooking-up-effective-technical-writing/ | content |
| 20 | 20 | Make Your Browser Dance | It was a crisp winter’s evening when I pulled up alongside the pier. I stepped out of my car and the bitterly cold sea air hit my face. I walked around to the boot, opened it and heaved out a heavy flight case. I slammed the boot shut, locked the car and started walking towards the venue. This was it. My first gig. I thought about all those weeks of preparation: editing video clips, creating 3-D objects, making coloured patterns, then importing them all into software and configuring effects to change as the music did; targeting frequency, beat, velocity, modifying size, colour, starting point; creating playlists of these… and working out ways to mix them as the music played. This was it. This was me VJing. This was all a lifetime (well a decade!) ago. When I started web designing, VJing took a back seat. I was more interested in interactive layouts, semantic accessible HTML, learning all the IE bugs and mastering the quirks that CSS has to offer. More recently, I have been excited by background gradients, 3-D transforms, the @keyframe directive, as well as new APIs such as getUserMedia, indexedDB, the Web Audio API But wait, have I just come full circle? Could it be possible, with these wonderful new things in technologies I am already familiar with, that I could VJ again, right here, in a browser? Well, there’s only one thing to do: let’s try it! Let’s take to the dance floor Over the past couple of years working in The Lab I have learned to take a much more iterative approach to projects than before. One of my new favourite methods of working is to create a proof of concept to make sure my theory is feasible, before going on to create a full-blown product. So let’s take the same approach here. The main VJing functionality I want to recreate is manipulating visuals in relation to sound. So for my POC I need to create a visual, with parameters that can be changed, then get some sound and see if I can analyse that sound to detect some data, which I can then use to manipulate the visual parameters. Easy, … | 2013 | Ruth John | ruthjohn | 2013-12-02T00:00:00+00:00 | https://24ways.org/2013/make-your-browser-dance/ | code |
| 70 | 70 | Bringing Your Code to the Streets | — or How to Be a Street VJ Our amazing world of web code is escaping out of the browser at an alarming rate and appearing in every aspect of the environment around us. Over the past few years we’ve already seen JavaScript used server-side, hardware coded with JavaScript, a rise of native style and desktop apps created with HTML, CSS and JavaScript, and even virtual reality (VR) is getting its fair share of front-end goodness. You can go ahead and play with JavaScript-powered hardware such as the Tessel or the Espruino to name a couple. Just check out the Tessel project page to see JavaScript in the world of coffee roasting or sleep tracking your pet. With the rise of the internet of things, JavaScript can be seen collecting information on flooding among other things. And if that’s not enough ‘outside the browser’ implementations, Node.js servers can even be found in aircraft! I previously mentioned VR and with three.js’s extra StereoEffect.js module it’s relatively simple to get browser 3D goodness to be Google Cardboard-ready, and thus set the stage for all things JavaScript and VR. It’s been pretty popular in the art world too, with interactive works such as Seb Lee-Delisle’s Lunar Trails installation, featuring the old arcade game Lunar Lander, which you can now play in your browser while others watch (it is the web after all). The Science Museum in London held Chrome Web Lab, an interactive exhibition featuring five experiments, showcasing the magic of the web. And it’s not even the connectivity of the web that’s being showcased; we can even take things offline and use web code for amazing things, such as fighting Ebola. One thing is for sure, JavaScript is awesome. Hell, if you believe those telly programs (as we all do), JavaScript can even take down the stock market, purely through the witchcraft of canvas! Go JavaScript! Now it’s our turn So I wanted to create a little project influenced by this theme, and as it’s Christmas, take it to the streets for a little bit of party fun! Something that could take c… | 2015 | Ruth John | ruthjohn | 2015-12-06T00:00:00+00:00 | https://24ways.org/2015/bringing-your-code-to-the-streets/ | code |
| 248 | 248 | How to Use Audio on the Web | I know what you’re thinking. I never never want to hear sound anywhere near a browser, ever ever, wow! 🙉 You’re having flashbacks, flashbacks to the days of yore, when we had a <bgsound> element and yup did everyone think that was the most rad thing since <blink>. I mean put those two together with a <marquee>, only use CSS colour names, make sure your borders were all set to ridge and you’ve got yourself the neatest website since 1998. The sound played when the website loaded and you could play a MIDI file as well! Everyone could hear that wicked digital track you chose. Oh, surfing was gnarly back then. Yes it is 2018, the end of in fact, soon to be 2019. We are certainly living in the future. Hoverboards self driving cars, holodecks VR headsets, rocket boots drone racing, sound on websites get real, Ruth. We can’t help but be jaded, even though the <bgsound> element is depreciated, and the autoplay policy appeared this year. Although still in it’s infancy, the policy “controls when video and audio is allowed to autoplay”, which should reduce the somewhat obtrusive playing of sound when a website or app loads in the future. But then of course comes the question, having lived in a muted present for so long, where and why would you use audio? ✨ Showcase Time ✨ There are some incredible uses of audio on websites today. This is my personal favourite futurelibrary.no, a site from Norway chronicling books that have been published from a forest of trees planted precisely for the books themselves. The sound effects are lovely, adding to the overall experience. futurelibrary.no Another site that executes this well is pottermore.com. The Hogwarts WebGL simulation uses both sound effects and ambient background music and gives a great experience. The button hovers are particularly good. pottermore.com Eighty-six and a half years is a beautiful narrative site, documenting the musings of an eighty-six and a half year old man. The background music playing on this site is not offensive, it adds to the experience. Eighty-six an… | 2018 | Ruth John | ruthjohn | 2018-12-22T00:00:00+00:00 | https://24ways.org/2018/how-to-use-audio-on-the-web/ | design |
| 190 | 190 | Self-Testing Pages with JavaScript | Working at an agency I am involved more and more on projects in which client side code is developed internally then sent out to a separate team for implementation. You provide static HTML, CSS and JavaScript which then get placed into the CMS and brought to life as an actual website. As you can imagine this can sometimes lead to frustrations. However many safeguards you include, handing over your code to someone else is always a difficult thing to do effectively. In this article I will show you how you can create a JavaScript implementation checker and that will give you more time for drink based activity as your web site and apps are launched quicker and with less unwanted drama! An all too frequent occurrence You’ve been working on a project for weeks, fixed all your bugs and send it to be implemented. You hear nothing and assume all is going well then a few days before it’s meant to launch you get an email from the implementation team informing you of bugs in your code that you need to urgently fix. The 24ways website with a misspelt ID for the years menu Being paranoid you trawl through the preview URL, check they have the latest files, check your code for errors then notice that a required HTML attribute has been omitted from the build and therefore CSS or JavaScript you’ve hooked onto that particular attribute isn’t being applied and that’s what is causing the “bug”. It takes you seconds drafting an email informing them of this, it takes then seconds putting the required attribute in and low and behold the bug is fixed, everyone is happy but you’ve lost a good few hours of your life – this time could have been better spent in the pub. I’m going to show you a way that these kind of errors can be alerted immediately during implementation of your code and ensure that when you are contacted you know that there actually is a bug to fix. You probably already know the things that could be omitted from a build and look like bugs so you’ll soon be creating tests to look for these and alert when they are not … | 2009 | Ross Bruniges | rossbruniges | 2009-12-12T00:00:00+00:00 | https://24ways.org/2009/self-testing-pages-with-javascript/ | process |
| 63 | 63 | Be Fluid with Your Design Skills: Build Your Own Sites | Just five years ago in 2010, when we were all busy trying to surprise and delight, learning CSS3 and trying to get whole websites onto one page, we had a poster on our studio wall. It was entitled ‘Designers Vs Developers’, an infographic that showed us the differences between the men(!) who created websites. Designers wore skinny jeans and used Macs and developers wore cargo pants and brought their own keyboards to work. We began to learn that designers and developers were not only doing completely different jobs but were completely different people in every way. This opinion was backed up by hundreds of memes, millions of tweets and pages of articles which used words like void and battle and versus. Thankfully, things move quickly in this industry; the wide world of web design has moved on in the last five years. There are new devices, technologies, tools – and even a few women. Designers have been helped along by great apps, software, open source projects, conferences, and a community of people who, to my unending pride, love to share their knowledge and their work. So the world has moved on, and if Miley Cyrus, Ruby Rose and Eliot Sumner are identifying as gender fluid (an identity which refers to a gender which varies over time or is a combination of identities), then I would like to come out as discipline fluid! OK, I will probably never identify as a developer, but I will identify as fluid! How can we be anything else in an industry that moves so quickly? That’s how we should think of our skills, our interests and even our job titles. After all, Steve Jobs told us that “Design is not just what it looks like and feels like. Design is how it works.” Sorry skinny-jean-wearing designers – this means we’re all designing something together. And it’s not just about knowing the right words to use: you have to know how it feels. How it feels when you make something work, when you fix that bug, when you make it work on IE. Like anything in life, things run smoothly when you make the effort to share experiences, em… | 2015 | Ros Horner | roshorner | 2015-12-12T00:00:00+00:00 | https://24ways.org/2015/be-fluid-with-your-design-skills-build-your-own-sites/ | code |
| 334 | 334 | Transitional vs. Strict Markup | When promoting web standards, standardistas often talk about XHTML as being more strict than HTML. In a sense it is, since it requires that all elements are properly closed and that attribute values are quoted. But there are two flavours of XHTML 1.0 (three if you count the Frameset DOCTYPE, which is outside the scope of this article), defined by the Transitional and Strict DOCTYPEs. And HTML 4.01 also comes in those flavours. The names reveal what they are about: Transitional DOCTYPEs are meant for those making the transition from older markup to modern ways. Strict DOCTYPEs are actually the default – the way HTML 4.01 and XHTML 1.0 were constructed to be used. A Transitional DOCTYPE may be used when you have a lot of legacy markup that cannot easily be converted to comply with a Strict DOCTYPE. But Strict is what you should be aiming for. It encourages, and in some cases enforces, the separation of structure and presentation, moving the presentational aspects from markup to CSS. From the HTML 4 Document Type Definition: This is HTML 4.01 Strict DTD, which excludes the presentation attributes and elements that W3C expects to phase out as support for style sheets matures. Authors should use the Strict DTD when possible, but may use the Transitional DTD when support for presentation attribute and elements is required. An additional benefit of using a Strict DOCTYPE is that doing so will ensure that browsers use their strictest, most standards compliant rendering modes. Tommy Olsson provides a good summary of the benefits of using Strict over Transitional in Ten questions for Tommy Olsson at Web Standards Group: In my opinion, using a Strict DTD, either HTML 4.01 Strict or XHTML 1.0 Strict, is far more important for the quality of the future web than whether or not there is an X in front of the name. The Strict DTD promotes a separation of structure and presentation, which makes a site so much easier to maintain. For those looking to start using web standards and valid, semantic markup, it is important… | 2005 | Roger Johansson | rogerjohansson | 2005-12-13T00:00:00+00:00 | https://24ways.org/2005/transitional-vs-strict-markup/ | code |
| 279 | 279 | Design the Invisible to Tell Better Stories on the Web | For design to be meaningful we need to tell stories. We need to design the invisible, the cues, the messages and the extra detail hidden beneath the aesthetics. It’s all about the story. From verbal exchanges around the campfire to books, the web and everything in between, storytelling allows us to share, organize and process information more efficiently. It helps us understand our surroundings and make emotional connections to people, places and experiences. Web design lends itself perfectly to the conventions of storytelling, a universal process. However, the stories vary because they’re defined by culture, society, politics and religion. All of which need considering if you are to design stories that are relevant to your target audience. The benefits of approaching design with storytelling in mind from the very start of the project is that we are creating considered design that allows users to quickly gather meaning from the website. They do this by reading between the lines and drawing on the wealth of knowledge they have acquired about the associations between colours, typyefaces and signs. With so much recognition and analysis happening subconsciously you have to consider how design communicates on this level. This invisible layer has a significant impact on what you say, how you say it and who you say it to. How can we design something that’s invisible? By researching and making conscious decisions about exactly what you are communicating, you can make the invisible visible. As is often quoted, good design is like air, you only notice it when it’s bad. So by designing the invisible the aim is to design stories that the audience receive subliminally, so that they go somewhat unnoticed, like good air. Storytelling strands To share these stories through design, you can break it down into several strands. Each strand tells a story on its own, but when combined they may start to tell a different story altogether. These strands are colour, typefaces, branding, tone of voice and symbols. All are literal… | 2011 | Robert Mills | robertmills | 2011-12-14T00:00:00+00:00 | https://24ways.org/2011/design-the-invisible/ | design |
| 53 | 53 | Get Expressive with Your Typography | In 1955 Beatrice Warde, an American communicator on typography, published a series of essays entitled The Crystal Goblet in which she wrote, “People who love ideas must have a love of words. They will take a vivid interest in the clothes that words wear.” And with that proposition Warde introduced the idea that just as we judge someone based on the clothes they are wearing, so we make judgements about text based on the typefaces in which it is set. Beatrice Warde. ©1970 Monotype Imaging Inc. Choosing the same typeface as everyone else, especially if you’re trying to make a statement, is like turning up to a party in the same dress; to a meeting in the same suit, shirt and tie; or to a craft ale dispensary in the same plaid shirt and turned-up skinny jeans. But there’s more to your choice of typeface than simply making an impression. In 2012 Jon Tan wrote on 24 ways about a scientific study called “The Aesthetics of Reading” which concluded that “good quality typography is responsible for greater engagement during reading and thus induces a good mood.” Furthermore, at this year’s Ampersand conference Sarah Hyndman, an expert in multisensory typography, discussed how typefaces can communicate with our subconscious. Sarah showed that different fonts could have an effect on how food tasted. A rounded font placed near a bowl of jellybeans would make them taste sweeter, and a jagged angular font would make them taste more sour. The quality of your typography can therefore affect the mood of your reader, and your font choice directly affect the senses. This means you can manipulate the way people feel. You can change their emotional state through type alone. Now that’s a real superpower! The effects of your body text design choices are measurable but subtle. If you really want to have an impact you need to think big. Literally. Display text and headings are your attention grabbers. They are your chance to interrupt, introduce and seduce. Display text and headings set the scene and draw people in. Text set large creates… | 2015 | Richard Rutter | richardrutter | 2015-12-04T00:00:00+00:00 | https://24ways.org/2015/get-expressive-with-your-typography/ | design |
| 120 | 120 | Easier Page States for Wireframes | When designing wireframes for web sites and web apps, it is often overlooked that the same ‘page’ can look wildly different depending on its context. A logged-in page will look different from a logged-out page; an administrator’s view may have different buttons than a regular user’s view; a power user’s profile will be more extensive than a new user’s. These different page states need designing at some point, especially if the wireframes are to form a useful communication medium between designer and developer. Documenting the different permutations can be a time consuming exercise involving either multiple pages in one’s preferred box-and-arrow software, or a fully fledged drawing containing all the possible combinations annotated accordingly. Enter interactive wireframes and Polypage Interactive wireframes built in HTML are a great design and communication tool. They provide a clickable prototype, running in the browser as would the final site. As such they give a great feel for how the site will be to use. Once you add in the possibilities of JavaScript and a library such as jQuery, they become even more flexible and powerful. Polypage is a jQuery plugin which makes it really easy to design multiple page states in HTML wireframes. There’s no JavaScript knowledge required (other than cutting and pasting in a few lines). The page views are created by simply writing all the alternatives into your HTML page and adding special class names to apply state and conditional view logic to the various options. When the page is loaded Polypage automatically detects the page states defined by the class names and creates a control bar enabling the user to toggle page states with the click of a mouse or the clack of a keyboard. Using cookies by way of the jQuery cookie plugin, Polypage retains the view state throughout your prototype. This means you could navigate through your wireframes as if you were logged out; as if you were logged in as an administrator; with notes on or off; or with any other view or state you m… | 2008 | Richard Rutter | richardrutter | 2008-12-11T00:00:00+00:00 | https://24ways.org/2008/easier-page-states-for-wireframes/ | process |
| 141 | 141 | Compose to a Vertical Rhythm | “Space in typography is like time in music. It is infinitely divisible, but a few proportional intervals can be much more useful than a limitless choice of arbitrary quantities.” So says the typographer Robert Bringhurst, and just as regular use of time provides rhythm in music, so regular use of space provides rhythm in typography, and without rhythm the listener, or the reader, becomes disorientated and lost. On the Web, vertical rhythm – the spacing and arrangement of text as the reader descends the page – is contributed to by three factors: font size, line height and margin or padding. All of these factors must calculated with care in order that the rhythm is maintained. The basic unit of vertical space is line height. Establishing a suitable line height that can be applied to all text on the page, be it heading, body copy or sidenote, is the key to a solid dependable vertical rhythm, which will engage and guide the reader down the page. To see this in action, I’ve created an example with headings, footnotes and sidenotes. Establishing a suitable line height The easiest place to begin determining a basic line height unit is with the font size of the body copy. For the example I’ve chosen 12px. To ensure readability the body text will almost certainly need some leading, that is to say spacing between the lines. A line-height of 1.5em would give 6px spacing between the lines of body copy. This will create a total line height of 18px, which becomes our basic unit. Here’s the CSS to get us to this point: body { font-size: 75%; } html>body { font-size: 12px; } p { line-height 1.5em; } There are many ways to size text in CSS and the above approach provides and accessible method of achieving the pixel-precision solid typography requires. By way of explanation, the first font-size reduces the body text from the 16px default (common to most browsers and OS set-ups) down to the 12px we require. This rule is primarily there for Internet Explorer 6 and below on Windows: the percentage value means that the t… | 2006 | Richard Rutter | richardrutter | 2006-12-12T00:00:00+00:00 | https://24ways.org/2006/compose-to-a-vertical-rhythm/ | design |
| 146 | 146 | Increase Your Font Stacks With Font Matrix | Web pages built in plain old HTML and CSS are displayed using only the fonts installed on users’ computers (@font-face implementations excepted). To enable this, CSS provides the font-family property for specifying fonts in order of preference (often known as a font stack). For example: h1 {font-family: 'Egyptienne F', Cambria, Georgia, serif} So in the above rule, headings will be displayed in Egyptienne F. If Egyptienne F is not available then Cambria will be used, failing that Georgia or the final fallback default serif font. This everyday bit of CSS will be common knowledge among all 24 ways readers. It is also a commonly held belief that the only fonts we can rely on being installed on users’ computers are the core web fonts of Arial, Times New Roman, Verdana, Georgia and friends. But is that really true? If you look in the fonts folder of your computer, or even your Mum’s computer, then you are likely to find a whole load of fonts besides the core ones. This is because many software packages automatically install extra typefaces. For example, Office 2003 installs over 100 additional fonts. Admittedly not all of these fonts are particularly refined, and not all are suitable for the Web. However they still do increase your options. The Matrix I have put together a matrix of (western) fonts showing which are installed with Mac and Windows operating systems, which are installed with various versions of Microsoft Office, and which are installed with Adobe Creative Suite. The matrix is available for download as an Excel file and as a CSV. There are no readily available statistics regarding the penetration of Office or Creative Suite, but you can probably take an educated guess based on your knowledge of your readers. The idea of the matrix is that use can use it to help construct your font stack. First of all pick the font you’d really like for your text – this doesn’t have to be in the matrix. Then pick the generic family (serif, sans-serif, cursive, fantasy or monospace) and a font from each of the … | 2007 | Richard Rutter | richardrutter | 2007-12-17T00:00:00+00:00 | https://24ways.org/2007/increase-your-font-stacks-with-font-matrix/ | design |
| 239 | 239 | Using the WebFont Loader to Make Browsers Behave the Same | Web fonts give us designers a whole new typographic palette with which to work. However, browsers handle the loading of web fonts in different ways, and this can lead to inconsistent user experiences. Safari, Chrome and Internet Explorer leave a blank space in place of the styled text while the web font is loading. Opera and Firefox show text with the default font which switches over when the web font has loaded, resulting in the so-called Flash of Unstyled Text (aka FOUT). Some people prefer Safari’s approach as it eliminates FOUT, others think the Firefox way is more appropriate as content can be read whilst fonts download. Whatever your preference, the WebFont Loader can make all browsers behave the same way. The WebFont Loader is a JavaScript library that gives you extra control over font loading. It was co-developed by Google and Typekit, and released as open source. The WebFont Loader works with most web font services as well as with self-hosted fonts. The WebFont Loader tells you when the following events happen as a browser downloads web fonts (or loads them from cache): when fonts start to download (‘loading’) when fonts finish loading (‘active’) if fonts fail to load (‘inactive’) If your web page requires more than one font, the WebFont Loader will trigger events for individual fonts, and for all the fonts as a whole. This means you can find out when any single font has loaded, and when all the fonts have loaded (or failed to do so). The WebFont Loader notifies you of these events in two ways: by applying special CSS classes when each event happens; and by firing JavaScript events. For our purposes, we’ll be using just the CSS classes. Implementing the WebFont Loader As stated above, the WebFont Loader works with most web font services as well as with self-hosted fonts. Self-hosted fonts To use the WebFont Loader when you are hosting the font files on your own server, paste the following code into your web page: <script type="text/javascript"> WebFontConfig = { custom: { families: ['Fon… | 2010 | Richard Rutter | richardrutter | 2010-12-02T00:00:00+00:00 | https://24ways.org/2010/using-the-webfont-loader-to-make-browsers-behave-the-same/ | code |
| 307 | 307 | Get the Balance Right: Responsive Display Text | Last year in 24 ways I urged you to Get Expressive with Your Typography. I made the case for grabbing your readers’ attention by setting text at display sizes, that is to say big. You should consider very large text in the same way you might a hero image: a picture that creates an atmosphere and anchors your layout. When setting text to be read, it is best practice to choose body and subheading sizes from a pre-defined scale appropriate to the viewport dimensions. We set those sizes using rems, locking the text sizes together so they all scale according to the page default and your reader’s preferences. You can take the same approach with display text by choosing larger sizes from the same scale. However, display text, as defined by its purpose and relative size, is text to be seen first, and read second. In other words a picture of text. When it comes to pictures, you are likely to scale all scene-setting imagery - cover photos, hero images, and so on - relative to the viewport. Take the same approach with display text: lock the size and shape of the text to the screen or browser window. Introducing viewport units With CSS3 came a new set of units which are locked to the viewport. You can use these viewport units wherever you might otherwise use any other unit of length such as pixels, ems or percentage. There are four viewport units, and in each case a value of 1 is equal to 1% of either the viewport width or height as reported in reference1 pixels: vw - viewport width, vh - viewport height, vmin - viewport height or width, whichever is smaller vmax - viewport height or width, whichever is larger In one fell swoop you can set the size of a display heading to be proportional to the screen or browser width, rather than choosing from a scale in a series of media queries. The following makes the heading font size 13% of the viewport width: h1 { font-size: 13 vw; } So for a selection of widths, the rendered font size would be: Rendered font size (px) Viewport width 13 vw 320 42 768 100 1024 133 1280 166 1920 … | 2016 | Richard Rutter | richardrutter | 2016-12-09T00:00:00+00:00 | https://24ways.org/2016/responsive-display-text/ | code |
| 330 | 330 | An Explanation of Ems | Ems are so-called because they are thought to approximate the size of an uppercase letter M (and so are pronounced emm), although 1em is actually significantly larger than this. The typographer Robert Bringhurst describes the em thus: The em is a sliding measure. One em is a distance equal to the type size. In 6 point type, an em is 6 points; in 12 point type an em is 12 points and in 60 point type an em is 60 points. Thus a one em space is proportionately the same in any size. To illustrate this principle in terms of CSS, consider these styles: #box1 { font-size: 12px; width: 1em; height: 1em; border:1px solid black; } #box2 { font-size: 60px; width: 1em; height: 1em; border: 1px solid black; } These styles will render like: M and M Note that both boxes have a height and width of 1em but because they have different font sizes, one box is bigger than the other. Box 1 has a font-size of 12px so its width and height is also 12px; similarly the text of box 2 is set to 60px and so its width and height are also 60px. | 2005 | Richard Rutter | richardrutter | 2005-12-02T00:00:00+00:00 | https://24ways.org/2005/an-explanation-of-ems/ | design |
| 286 | 286 | Defending the Perimeter Against Web Widgets | On July 14, 1789, citizens of Paris stormed the Bastille, igniting a revolution that toppled the French monarchy. On July 14 of this year, there was a less dramatic (though more tweeted) takedown: The Deck network, which delivers advertising to some of the most popular web design and culture destinations, was down for about thirty minutes. During this period, most partner sites running ads from The Deck could not be viewed as result. A few partners were unaffected (aside from not having an ad to display). Fortunately, Dribbble, was one of them. In this article, I’ll discuss outages like this and how to defend against them. But first, a few qualifiers: The Deck has been rock solid – this is the only downtime we’ve witnessed since joining in June. More importantly, the issues in play are applicable to any web widget you might add to your site to display third-party content. Down and out Your defense is only as good as its weakest link. Web pages are filled with links, some of which threaten the ability of your page to load quickly and correctly. If you want your site to work when external resources fail, you need to identify the weak links on your site. In this article, we’ll talk about web widgets as a point of failure and defensive JavaScript techniques for handling them. Widgets 101 Imagine a widget that prints out a Pun of the Day on your site. A simple technique for both widget provider and consumer is for the provider to expose a URL: http://widgetjonesdiary.com/punoftheday.js which returns a JavaScript file like this: document.write("<h2>The Pun of the Day</h2><p>Where do frogs go for beers after work? Hoppy hour!</p>"); The call to document.write() injects the string passed into the document where it is called. So to display the widget on your page, simply add an external script tag where you want it to appear: <div class="punoftheday"> <script src="http://widgetjonesdiary.com/punoftheday.js"></script> <!-- Content appears here as output of script above --> </div> This approach is incredibly … | 2011 | Rich Thornett | richthornett | 2011-12-06T00:00:00+00:00 | https://24ways.org/2011/defending-the-perimeter-against-web-widgets/ | process |
| 55 | 55 | How Tabs Should Work | Tabs in browsers (not browser tabs) are one of the oldest custom UI elements in a browser that I can think of. They’ve been done to death. But, sadly, most of the time I come across them, the tabs have been badly, or rather partially, implemented. So this post is my definition of how a tabbing system should work, and one approach of implementing that. But… tabs are easy, right? I’ve been writing code for tabbing systems in JavaScript for coming up on a decade, and at one point I was pretty proud of how small I could make the JavaScript for the tabbing system: var tabs = $('.tab').click(function () { tabs.hide().filter(this.hash).show(); }).map(function () { return $(this.hash)[0]; }); $('.tab:first').click(); Simple, right? Nearly fits in a tweet (ignoring the whole jQuery library…). Still, it’s riddled with problems that make it a far from perfect solution. Requirements: what makes the perfect tab? All content is navigable and available without JavaScript (crawler-compatible and low JS-compatible). ARIA roles. The tabs are anchor links that: are clickable have block layout have their href pointing to the id of the panel element use the correct cursor (i.e. cursor: pointer). Since tabs are clickable, the user can open in a new tab/window and the page correctly loads with the correct tab open. Right-clicking (and Shift-clicking) doesn’t cause the tab to be selected. Native browser Back/Forward button correctly changes the state of the selected tab (think about it working exactly as if there were no JavaScript in place). The first three points are all to do with the semantics of the markup and how the markup has been styled. I think it’s easy to do a good job by thinking of tabs as links, and not as some part of an application. Links are navigable, and they should work the same way other links on the page work. The last three points are JavaScript problems. Let’s investigate that. The shitmus test Like a litmus test, here’s a couple of quick ways you can tell if a tabbing system is poorly implemented: Cha… | 2015 | Remy Sharp | remysharp | 2015-12-22T00:00:00+00:00 | https://24ways.org/2015/how-tabs-should-work/ | code |
| 182 | 182 | Breaking Out The Edges of The Browser | HTML5 contains more than just the new entities for a more meaningful document, it also contains an arsenal of JavaScript APIs. So many in fact, that some APIs have outgrown the HTML5 spec’s backyard and have been sent away to grow up all on their own and been given the prestigious honour of being specs in their own right. So when I refer to (bendy finger quote) “HTML5”, I mean the HTML5 specification and a handful of other specifications that help us authors build web applications. Examples of those specs I would include in the umbrella term would be: geolocation, web storage, web databases, web sockets and web workers, to name a few. For all you guys and gals, on this special 2009 series of 24 ways, I’m just going to focus on data storage and offline applications: boldly taking your browser where no browser has gone before! Web Storage The Web Storage API is basically cookies on steroids, a unhealthy dosage of steroids. Cookies are always a pain to work with. First of all you have the problem of setting, changing and deleting them. Typically solved by Googling and blindly relying on PPK’s solution. If that wasn’t enough, there’s the 4Kb limit that some of you have hit when you really don’t want to. The Web Storage API gets around all of the hoops you have to jump through with cookies. Storage supports around 5Mb of data per domain (the spec’s recommendation, but it’s open to the browsers to implement anything they like) and splits in to two types of storage objects: sessionStorage – available to all pages on that domain while the window remains open localStorage – available on the domain until manually removed Support Ignoring beta browsers for our support list, below is a list of the major browsers and their support for the Web Storage API: Latest: Internet Explorer, Firefox, Safari (desktop & mobile/iPhone) Partial: Google Chrome (only supports localStorage) Not supported: Opera (as of 10.10) Usage Both sessionStorage and localStorage support the same interface for accessing their co… | 2009 | Remy Sharp | remysharp | 2009-12-02T00:00:00+00:00 | https://24ways.org/2009/breaking-out-the-edges-of-the-browser/ | code |
| 172 | 172 | The Construction of Instruction | If the world were made to my specifications, all your clients would be happy to pay for a web writer to craft every sentence into something as elegant as it was functional, and the client would have planned the content so that you had it just when you asked, but we both know that won’t happen every time. Sometimes you just know they are going to write the About page, two company blog pages and a Facebook fan page before resigning their position as chief content writer and you are going to end up filling in all the details that will otherwise just be Lorem Ipsum. Welcome to the big world of microcopy: A man walks into a bar. The bartender nods a greeting and watches as the man scans the bottles behind the bar. “Er, you have a lot of gin here. Is there one you would recommend?” “Yes sir.” Long pause. “… Never mind, I’ll have the one in the green bottle.” “Certainly, sir. But you can’t buy it from this part of the bar. You need to go through the double doors there.” “But they look like they lead into the kitchen.” “Really, sir? Well, no, that’s where we allow customers to purchase gin.” The man walks through the doors. On the other side he is greeted by the same bartender. “Y-you!” he stammers but the reticent bartender is now all but silent. Unnerved, the man points to a green bottle, “Er, I’d like to buy a shot of that please. With ice and tonic water.” The bartender mixes the drink and puts it on the bar just out of the reach of the man and looks up. “Um, do you take cards?” the man asks, ready to present his credit card. The bartender goes to take the card to put it through the machine. “Wait! How much was it – with sales tax and everything? Do you take a gratuity?” The bartender simply shrugs. The man eyes him for a moment and decides to try his luck at the bar next door. In the Choose Your Own Adventure version of this story there are plenty of ways to stop the man giving up. You could let him buy the gin right where he was; you could make the price more obvious; you could signpost the pla… | 2009 | Relly Annett-Baker | rellyannettbaker | 2009-12-08T00:00:00+00:00 | https://24ways.org/2009/the-construction-of-instruction/ | content |
| 227 | 227 | A Contentmas Epiphany | The twelve days of Christmas fall between 25 December, Christmas Day, and 6 January, the Epiphany of the Kings. Traditionally, these have been holidays and a lot of us still take a good proportion of these days off. Equally, a lot of us have a got a personal site kicking around somewhere that we sigh over and think, “One day I’ll sort you out!” Why not take this downtime to give it a big ol’ refresh? I know, good idea, huh? HEY WAIT! WOAH! NO-ONE’S TOUCHING PHOTOSHOP OR DOING ANY CSS FANCYWORK UNTIL I’M DONE WITH YOU! Be honest, did you immediately think of a sketch or mockup you have tucked away? Or some clever little piece of code you want to fiddle with? Now ask yourself, why would you start designing the container if you haven’t worked out what you need to put inside? Anyway, forget the content strategy lecture; I haven’t given you your gifts yet. I present The Twelve Days of Contentmas! This is a simple little plan to make sure that your personal site, blog or portfolio is not just looking good at the end of these twelve days, but is also a really useful repository of really useful content. WARNING KLAXON: There are twelve parts, one for each day of Christmas, so this is a lengthy article. I’m not expecting anyone to absorb this in one go. Add to Instapaper. There is no TL;DR for this because it’s a multipart process, m’kay? Even so, this plan of mine cuts corners on a proper applied strategy for content. You might find some aspects take longer than the arbitrary day I’ve assigned. And if you apply this to your company-wide intranet, I won’t be held responsible for the mess. That said, I encourage you to play along and sample some of the practical aspects of organising existing content and planning new content because it is, honestly, an inspiring and liberating process. For one thing, you get to review all the stuff you have put out for the world to look at and see what you could do next. This always leaves me full of ideas on how to plug the gaps I’ve found, so I hope you are similarly motivated come… | 2010 | Relly Annett-Baker | rellyannettbaker | 2010-12-21T00:00:00+00:00 | https://24ways.org/2010/a-contentmas-epiphany/ | content |
| 287 | 287 | Extracting the Content | As we throw away our canvas in approaches and yearn for a content-out process, there remains a pain point: the Content. It is spoken of in the hushed tones usually reserved for Lord Voldemort. The-thing-that-someone-else-is-responsible-for-that-must-not-be-named. Designers and developers have been burned before by not knowing what the Content is, how long it is, what style it is and when the hell it’s actually going to be delivered, in internet eons past. Warily, they ask clients for it. But clients don’t know what to make, or what is good, because no one taught them this in business school. Designers struggle to describe what they need and when, so the conversation gets put off until it’s almost too late, and then everyone is relieved that they can take the cop-out of putting up a blog and maybe some product descriptions from the brochure. The Content in content out. I’m guessing, as a smart, sophisticated, and, may I say, nicely-scented reader of the honourable and venerable tradition of 24 ways, that you sense something better is out there. Bunches of boxes to fill in just don’t cut it any more in a responsive web design world. The first question is, how are you going to design something to ensure users have the easiest access to the best Content, if you haven’t defined at the beginning what that Content is? Of course, it’s more than possible that your clients have done lots of user research before approaching you to start this project, and have a plethora of finely tuned Content for you to design with. Have you finished laughing yet? Alright then. Let’s just assume that, for whatever reason of gross oversight, this hasn’t happened. What next? Bringing up Content for the first time with a client is like discussing contraception when you’re in a new relationship. It might be awkward and either party would probably rather be doing something else, but it needs to be broached before any action happens (that, and it’s disastrous to assume the other party has the matter in hand). If we can’t talk about it, how … | 2011 | Relly Annett-Baker | rellyannettbaker | 2011-12-15T00:00:00+00:00 | https://24ways.org/2011/extracting-the-content/ | content |
| 50 | 50 | Make a Comic | For something slightly different over Christmas, why not step away from your computer and make a comic? Definitely not the author working on a comic in the studio, with the desk displaying some of the things you need to make a comic on paper. Why make a comic? First of all, it’s truly fun and it’s not that difficult. If you’re a designer, you can use skills you already have, so why not take some time to indulge your aesthetic whims and make something for yourself, rather than for a client or your company. And you can use a computer – or not. If you’re an interaction designer, it’s likely you’ve already made a storyboard or flow, or designed some characters for personas. This is a wee jump away from that, to the realm of storytelling and navigating human emotions through characters who may or may not be human. Similar medium and skills, different content. It’s not a client deliverable but something that stands by itself, and you’ve nobody’s criteria to meet except those that exist in your imagination! Thanks to your brain and the alchemy of comics, you can put nearly anything in a sequence and your brain will find a way to make sense of it. Scott McCloud wrote about the non sequitur in comics: “There is a kind of alchemy at work in the space between panels which can help us find meaning or resonance in even the most jarring of combinations.” Here’s an example of a non sequitur from Scott McCloud’s Understanding Comics – the images bear no relation to one another, but since they’re in a sequence our brains do their best to understand it: Once you know this it takes the pressure off somewhat. It’s a fun thing to keep in mind and experiment with in your comics! Materials needed A4 copy/printing paper HB pencil for light drawing Dip pen and waterproof Indian ink Bristol board (or any good quality card with a smooth, durable surface) Step 1: Get ideas You’d be surprised where you can take a small grain of an idea and develop it into an interesting comic. Think about a funny conversation you had, or any i… | 2015 | Rebecca Cottrell | rebeccacottrell | 2015-12-20T00:00:00+00:00 | https://24ways.org/2015/make-a-comic/ | design |
| 78 | 78 | Fluent Design through Early Prototyping | There’s a small problem with wireframes. They’re not good for showing the kind of interactions we now take for granted – transitions and animations on the web, in Android, iOS, and other platforms. There’s a belief that early prototyping requires a large amount of time and effort, and isn’t worth an early investment. But it’s not true! It’s still normal to spend a significant proportion of time working in wireframes. Given that wireframes are high-level and don’t show much detail, it’s tempting to give up control and responsibility for things like transitions and other things sidelined as visual considerations. These things aren’t expressed well, and perhaps not expressed at all, in wireframes, yet they critically influence the quality of a product. Rapid prototyping early helps to bring sidelined but significant design considerations into focus. Speaking fluent design Fluency in a language means being able to speak it confidently and accurately. The Latin root means flow. By design fluency, I mean using a set of skills in order to express or communicate an idea. Prototyping is a kind of fluency. It takes designers beyond the domain of grey and white boxes to consider all the elements that make up really good product design. Designers shouldn’t be afraid of speaking fluent design. They should think thoroughly about product decisions beyond their immediate role — not for the sake of becoming some kind of power-hungry design demigod, but because it will lead to better, more carefully considered product design. Wireframes are incomplete sentences Wireframes, once they’ve served their purpose, are a kind of self-imposed restriction. Mostly made out of grey and white boxes, they deliberately express the minimum. Important details — visuals, nuanced transitions, sounds — are missing. Their appearance bears little resemblance to the final thing. Responsibility for things that traditionally didn’t matter (or exist) is relinquished. Animations and transitions in particular are increasingly relevant to the mobile d… | 2012 | Rebecca Cottrell | rebeccacottrell | 2012-12-10T00:00:00+00:00 | https://24ways.org/2012/fluent-design-through-early-prototyping/ | ux |
| 33 | 33 | Five Ways to Animate Responsibly | It’s been two years since I wrote about “Flashless Animation” on this very site. Since then, animation has steadily begun popping up on websites, from sleek app-like user interfaces to interactive magazine-like spreads. It’s an exciting time for web animation wonks, interaction developers, UXers, UI designers and a host of other acronyms! But in our rush to experiment with animation it seems that we’re having fewer conversations about whether or not we should use it, and more discussions about what we can do with it. We spend more time fretting over how to animate all the things at 60fps than we do devising ways to avoid incapacitating users with vestibular disorders. I love web animation. I live it. And I make adorably silly things with it that have no place on a self-respecting production website. I know it can be abused. We’ve all made fun of Flash-turbation. But how quickly we forget the lessons we learned from that period of web design. Parallax scrolling effects may be the skip intro of this generation. Surely we have learned better in the sobering up period between Flash and the web animation API. So here are five bits of advice we can use to pull back from the edge of animation abuse. With these thoughts in mind, we can make 2015 the year web animation came into its own. Animate deliberately Sadly, animation is considered decorative by the bulk of the web development community. UI designers and interaction developers know better, of course. But when I’m teaching a workshop on animation for interaction, I know that my students face an uphill battle against decision makers who consider it nice to have, and tack it on at the end of a project, if at all. This stigma is hard to shake. But it starts with us using animation deliberately or not at all. Poorly considered, tacked-on animation will often cause more harm than good. Users may complain that it’s too slow or too fast, or that they have no idea what just happened. When I was at Chrome Dev Summit this year, I had the privilege to speak with Roma… | 2014 | Rachel Nabors | rachelnabors | 2014-12-14T00:00:00+00:00 | https://24ways.org/2014/five-ways-to-animate-responsibly/ | ux |
| 86 | 86 | Flashless Animation | Animation in a Flashless world When I splashed down in web design four years ago, the first thing I wanted to do was animate a cartoon in the browser. I’d been drawing comics for years, and I’ve wanted to see them come to life for nearly as long. Flash animation was still riding high, but I didn’t want to learn Flash. I wanted to learn JavaScript! Sadly, animating with JavaScript was limiting and resource-intensive. My initial foray into an infinitely looping background did more to burn a hole in my CPU than amaze my friends (although it still looks pretty cool). And there was still no simple way to incorporate audio. The browser technology just wasn’t there. Things are different now. CSS3 transitions and animations can do most of the heavy lifting and HTML5 audio can serve up the music and audio clips. You can do a lot without leaning on JavaScript at all, and when you lean on JavaScript, you can do so much more! In this project, I’m going to show you how to animate a simple walk cycle with looping audio. I hope this will inspire you to do something really cool and impress your friends. I’d love to see what you come up with, so please send your creations my way at rachelnabors.com! Note: Because every browser wants to use its own prefixes with CSS3 animations, and I have neither the time nor the space to write all of them out, I will use the W3C standard syntaxes; that is, going prefix-less. You can implement them out of the box with something like Prefixfree, or you can add prefixes on your own. If you take the latter route, I recommend using Sass and Compass so you can focus on your animations, not copying and pasting. The walk cycle Walk cycles are the “Hello world” of animation. One of the first projects of animation students is to spend hours drawing dozens of frames to complete a simple loopable animation of a character walking. Most animators don’t have to draw every frame themselves, though. They draw a few key frames and send those on to production animators to work on the between frames (or twe… | 2012 | Rachel Nabors | rachelnabors | 2012-12-06T00:00:00+00:00 | https://24ways.org/2012/flashless-animation/ | code |
| 47 | 47 | Developing Robust Deployment Procedures | Once you have developed your site, how do you make it live on your web hosting? For many years the answer was to log on to your server and upload the files via FTP. Over time most hosts and FTP clients began to support SFTP, ensuring your files were transmitted over a secure connection. The process of deploying a site however remained the same. There are issues with deploying a site in this way. You are essentially transferring files one by one to the server without any real management of that transfer. If the transfer fails for some reason, you may end up with a site that is only half updated. It can then be really difficult to work out what hasn’t been replaced or added, especially where you are updating an existing site. If you are updating some third-party software your update may include files that should be removed, but that may not be obvious to you and you risk leaving outdated files littering your file system. Updating using (S)FTP is a fragile process that leaves you open to problems caused by both connectivity and human error. Is there a better way to do this? You’ll be glad to know that there is. A modern professional deployment workflow should have you moving away from fragile manual file transfers to deployments linked to code committed into source control. The benefits of good practice You may never have experienced any major issues while uploading files over FTP, and good FTP clients can help. However, there are other benefits to moving to modern deployment practices. No surprises when you launch If you are deploying in the way I suggest in this article you should have no surprises when you launch because the code you committed from your local environment should be the same code you deploy – and to staging if you have a staging server. A missing vital file won’t cause things to start throwing errors on updating the live site. Being able to work collaboratively Source control and good deployment practice makes working with your clients and other developers easy. Deploying first to a staging… | 2014 | Rachel Andrew | rachelandrew | 2014-12-04T00:00:00+00:00 | https://24ways.org/2014/developing-robust-deployment-procedures/ | process |
| 68 | 68 | Grid, Flexbox, Box Alignment: Our New System for Layout | Three years ago for 24 ways 2012, I wrote an article about a new CSS layout method I was excited about. A specification had emerged, developed by people from the Internet Explorer team, bringing us a proper grid system for the web. In 2015, that Internet Explorer implementation is still the only public implementation of CSS grid layout. However, in 2016 we should be seeing it in a new improved form ready for our use in browsers. Grid layout has developed hidden behind a flag in Blink, and in nightly builds of WebKit and, latterly, Firefox. By being developed in this way, breaking changes could be safely made to the specification as no one was relying on the experimental implementations in production work. Another new layout method has emerged over the past few years in a more public and perhaps more painful way. Shipped prefixed in browsers, The flexible box layout module (flexbox) was far too tempting for developers not to use on production sites. Therefore, as changes were made to the specification, we found ourselves with three different flexboxes, and browser implementations that did not match one another in completeness or in the version of specified features they supported. Owing to the different ways these modules have come into being, when I present on grid layout it is often the very first time someone has heard of the specification. A question I keep being asked is whether CSS grid layout and flexbox are competing layout systems, as though it might be possible to back the loser in a CSS layout competition. The reality, however, is that these two methods will sit together as one system for doing layout on the web, each method playing to certain strengths and serving particular layout tasks. If there is to be a loser in the battle of the layouts, my hope is that it will be the layout frameworks that tie our design to our markup. They have been a necessary placeholder while we waited for a true web layout system, but I believe that in a few years time we’ll be easily able to date a website to circa 2015 … | 2015 | Rachel Andrew | rachelandrew | 2015-12-15T00:00:00+00:00 | https://24ways.org/2015/grid-flexbox-box-alignment-our-new-system-for-layout/ | code |
| 95 | 95 | Giving Content Priority with CSS3 Grid Layout | Browser support for many of the modules that are part of CSS3 have enabled us to use CSS for many of the things we used to have to use images for. The rise of mobile browsers and the concept of responsive web design has given us a whole new way of looking at design for the web. However, when it comes to layout, we haven’t moved very far at all. We have talked for years about separating our content and source order from the presentation of that content, yet most of us have had to make decisions on source order in order to get a certain visual layout. Owing to some interesting specifications making their way through the W3C process at the moment, though, there is hope of change on the horizon. In this article I’m going to look at one CSS module, the CSS3 grid layout module, that enables us to define a grid and place elements on to it. This article comprises a practical demonstration of the basics of grid layout, and also a discussion of one way in which we can start thinking of content in a more adaptive way. Before we get started, it is important to note that, at the time of writing, these examples work only in Internet Explorer 10. CSS3 grid layout is a module created by Microsoft, and implemented using the -ms prefix in IE10. My examples will all use the -ms prefix, and not include other prefixes simply because this is such an early stage specification, and by the time there are implementations in other browsers there may be inconsistencies. The implementation I describe today may well change, but is also there for your feedback. If you don’t have access to IE10, then one way to view and test these examples is by signing up for an account with Browserstack – the free trial would give you time to have a look. I have also included screenshots of all relevant stages in creating the examples. What is CSS3 grid layout? CSS3 grid layout aims to let developers divide up a design into a grid and place content on to that grid. Rather than trying to fabricate a grid from floats, you can declare an actual grid on a c… | 2012 | Rachel Andrew | rachelandrew | 2012-12-18T00:00:00+00:00 | https://24ways.org/2012/css3-grid-layout/ | code |
| 130 | 130 | Faster Development with CSS Constants | Anyone even slightly familiar with a programming language will have come across the concept of constants – a fixed value that can be used through your code. For example, in a PHP script I might have a constant which is the email address that all emails generated by my application get sent to. $adminEmail = 'info@example.com'; I could then use $adminEmail in my script whenever I wanted an email to go to that address. The benefit of this is that when the client decides they want the email to go to a different address, I only need change it in one place – the place where I initially set the constant. I could also quite easily make this value user defined and enable the administrator to update the email address. Unfortunately CSS doesn’t support constants. It would be really useful to be able to define certain values initially and then use them throughout a CSS file, so in this article I’m going to take a look at some of the methods we do have available and provide pointers to more in depth commentary on each. If you have a different method, or tip to share please add it to the comments. So what options do we have? One way to get round the lack of constants is to create some definitions at the top of your CSS file in comments, to define ‘constants’. A common use for this is to create a ‘color glossary’. This means that you have a quick reference to the colors used in the site to avoid using alternates by mistake and, if you need to change the colors, you have a quick list to go down and do a search and replace. In the below example, if I decide I want to change the mid grey to #999999, all I need to do is search and replace #666666 with #999999 – assuming I’ve remember to always use that value for things which are mid grey. /* Dark grey (text): #333333 Dark Blue (headings, links) #000066 Mid Blue (header) #333399 Light blue (top navigation) #CCCCFF Mid grey: #666666 */ This is a fairly low-tech method, but if used throughout the development of the CSS files can make changes far simpler and help to ensure co… | 2006 | Rachel Andrew | rachelandrew | 2006-12-02T00:00:00+00:00 | https://24ways.org/2006/faster-development-with-css-constants/ | process |
| 192 | 192 | Cleaner Code with CSS3 Selectors | The parts of CSS3 that seem to grab the most column inches on blogs and in articles are the shiny bits. Rounded corners, text shadow and new ways to achieve CSS layouts are all exciting and bring with them all kinds of possibilities for web design. However what really gets me, as a developer, excited is a bit more mundane. In this article I’m going to take a look at some of the ways our front and back-end code will be simplified by CSS3, by looking at the ways we achieve certain visual effects now in comparison to how we will achieve them in a glorious, CSS3-supported future. I’m also going to demonstrate how we can use these selectors now with a little help from JavaScript – which can work out very useful if you find yourself in a situation where you can’t change markup that is being output by some server-side code. The wonder of nth-child So why does nth-child get me so excited? Here is a really common situation, the designer would like the tables in the application to look like this: Setting every other table row to a different colour is a common way to enhance readability of long rows. The tried and tested way to implement this is by adding a class to every other row. If you are writing the markup for your table by hand this is a bit of a nuisance, and if you stick a row in the middle you have to change the rows the class is applied to. If your markup is generated by your content management system then you need to get the server-side code to add that class – if you have access to that code. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Striping every other row - using classes</title> <style type="text/css"> body { padding: 40px; margin: 0; font: 0.9em Arial, Helvetica, sans-serif; } table { border-collapse: collapse; border: 1px solid #124412; width: 600px; } th { border: 1px solid #124412; background-color: #334f33; color: #fff; padding: 0.4em; text-… | 2009 | Rachel Andrew | rachelandrew | 2009-12-20T00:00:00+00:00 | https://24ways.org/2009/cleaner-code-with-css3-selectors/ | code |
| 214 | 214 | Christmas Gifts for Your Future Self: Testing the Web Platform | In the last year I became a CSS specification editor, on a mission to revitalise CSS Multi-column layout. This has involved learning about many things, one of which has been the Web Platform Tests project. In this article, I’m going to share what I’ve learned about testing the web platform. I’m also going to explain why I think you might want to get involved too. Why test? At one time or another it is likely that you have been frustrated by an issue where you wrote some valid CSS, and one browser did one thing with it and another something else entirely. Experiences like this make many web developers feel that browser vendors don’t work together, or they are actively doing things in a different way to one another to the detriment of those of us who use the platform. You’ll be glad to know that isn’t the case, and that the people who work on browsers want things to be consistent just as much as we do. It turns out however that interoperability, which is the official term for “works in all browsers”, is hard. Thanks to web-platform-tests, a test from another browser vendor just found genuine bug in our code before we shipped 😻— Brian Birtles (@brianskold) February 10, 2017 In order for W3C Specifications to move on to become W3C Recommendations we need to have interoperable implementations. 6.2.4 Implementation Experience Implementation experience is required to show that a specification is sufficiently clear, complete, and relevant to market needs, to ensure that independent interoperable implementations of each feature of the specification will be realized. While no exhaustive list of requirements is provided here, when assessing that there is adequate implementation experience the Director will consider (though not be limited to): is each feature of the current specification implemented, and how is this demonstrated? are there independent interoperable implementations of the current specification? are there implementations created by people other than the authors of the specification? are implementations publi… | 2017 | Rachel Andrew | rachelandrew | 2017-12-10T00:00:00+00:00 | https://24ways.org/2017/testing-the-web-platform/ | code |
| 243 | 243 | Researching a Property in the CSS Specifications | I frequently joke that I’m “reading the specs so you don’t have to”, as I unpack some detail of a CSS spec in a post on my blog, some documentation for MDN, or an article on Smashing Magazine. However waiting for someone like me to write an article about something is a pretty slow way to get the information you need. Sometimes people like me get things wrong, or specifications change after we write a tutorial. What if you could just look it up yourself? That’s what you get when you learn to read the CSS specifications, and in this article my aim is to give you the basic details you need to grab quick information about any CSS property detailed in the CSS specs. Where are the CSS Specifications? The easiest way to see all of the CSS specs is to take a look at the Current Work page in the CSS section of the W3C Website. Here you can see all of the specifications listed, the level they are at and their status. There is also a link to the specification from this page. I explained CSS Levels in my article Why there is no CSS 4. Who are the specifications for? CSS specifications are for everyone who uses CSS. You might be a browser engineer - referred to as an implementor - needing to know how to implement a feature, or a web developer - referred to as an author - wanting to know how to use the feature. The fact that both parties are looking at the same document hopefully means that what the browser displays is what the web developer expected. Which version of a spec should I look at? There are a couple of places you might want to look. Each published spec will have the latest published version, which will have TR in the URL and can be accessed without a date (which is always the newest version) or at a date, which will be the date of that publication. If I’m referring to a particular Working Draft in an article I’ll typically link to the dated version. That way if the information changes it is possible for someone to see where I got the information from at the time of writing. If you want the very latest additions an… | 2018 | Rachel Andrew | rachelandrew | 2018-12-14T00:00:00+00:00 | https://24ways.org/2018/researching-a-property-in-the-css-specifications/ | code |
| 306 | 306 | What next for CSS Grid Layout? | In 2012 I wrote an article for 24 ways detailing a new CSS Specification that had caught my eye, at the time with an implementation only in Internet Explorer. What I didn’t realise at the time was that CSS Grid Layout was to become a theme on which I would base the next four years of research, experimentation, writing and speaking. As I write this article in December 2016, we are looking forward to CSS Grid Layout being shipped in Chrome and Firefox. What will ship early next year in those browsers is expanded and improved from the early implementation I explored in 2012. Over the last four years the spec has been developed as part of the CSS Working Group process, and has had input from browser engineers, specification writers and web developers. Use cases have been discussed, and features added. The CSS Grid Layout specification is now a Candidate Recommendation. This status means the spec is to all intents and purposes, finished. The discussions now happening are on fine implementation details, and not new feature ideas. It makes sense to draw a line under a specification in order that browser vendors can ship complete, interoperable implementations. That approach is good for all of us, it makes development far easier if we know that a browser supports all of the features of a specification, rather than working out which bits are supported. However it doesn’t mean that works stops here, and that new use cases and features can’t be proposed for future levels of Grid Layout. Therefore, in this article I’m going to take a look at some of the things I think grid layout could do in the future. I would love for these thoughts to prompt you to think about how Grid - or any CSS specification - could better suit the use cases you have. Subgrid - the missing feature of Level 1 The implementation of CSS Grid Layout in Chrome, Firefox and Webkit is comparable and very feature complete. There is however one standout feature that has not been implemented in any browser as yet - subgrid. Once you set the value of the displa… | 2016 | Rachel Andrew | rachelandrew | 2016-12-12T00:00:00+00:00 | https://24ways.org/2016/what-next-for-css-grid-layout/ | code |
| 332 | 332 | CSS Layout Starting Points | I build a lot of CSS layouts, some incredibly simple, others that cause sleepless nights and remind me of the torturous puzzle books that were given to me at Christmas by aunties concerned for my education. However, most of the time these layouts fit quite comfortably into one of a very few standard formats. For example: Liquid, multiple column with no footer Liquid, multiple column with footer Fixed width, centred Rather than starting out with blank CSS and (X)HTML documents every time you need to build a layout, you can fairly quickly create a bunch of layout starting points, that will give you a solid basis for creating the rest of the design and mean that you don’t have to remember how a three column layout with a footer is best achieved every time you come across one! These starting points can be really basic, in fact that’s exactly what you want as the final design, the fonts, the colours and so on will be different every time. It’s just the main sections we want to be able to quickly get into place. For example, here is a basic starting point CSS and XHTML document for a fixed width, centred layout with a footer. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Fixed Width and Centred starting point document</title> <link rel="stylesheet" type="text/css" href="fixed-width-centred.css" /> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> </head> <body> <div id="wrapper"> <div id="side"> <div class="inner"> <p>Sidebar content here</p> </div> </div> <div id="content"> <div class="inner"> <p>Your main content goes here.</p> </div> </div> <div id="footer"> <div class="inner"> <p>Ho Ho Ho!</p> </div> </div> </div> </body> </html> body { text-align: center; min-width: 740px; padding: 0; margi… | 2005 | Rachel Andrew | rachelandrew | 2005-12-04T00:00:00+00:00 | https://24ways.org/2005/css-layout-starting-points/ | code |
| 199 | 199 | Knowing the Future - Tips for a Happy Launch Day | You’ve chosen your frameworks and libraries. You’ve learned how to write code which satisfies the buzzword and performance gods. Now you need to serve it to a global audience, and make things easy to preview, to test, to sign-off, and to evolve. But infrastructure design is difficult and boring for most of us. We just want to get our work out into the wild. If only we had tools which would let us go, “Oh yeah! It all deploys perfectly every time” and shout, “You need another release? BAM! What’s next?” A truth that can be hard to admit is that very often, the production environment and its associated deployment processes are poorly defined until late into a project. This can be a problem. It makes my palms sweaty just thinking about it. If like me, you have spent time building things for clients, you’ll probably have found yourself working with a variety of technical partners and customers who bring different constraints and opportunities to your projects. Knowing and proving the environments and the deployment processes is often very difficult, but can be a factor which profoundly impacts our ability to deliver what we promised. To say nothing of our ability to sleep at night or leave our fingernails un-chewed. Let’s look at this a little, and see if we can’t set you up for a good night’s sleep, with dry palms and tidy fingernails. A familiar problem You’ve been here too, right? The project development was tough, but you’re pleased with what you are running in your local development environments. Now you need to get the client to see and approve your build, and hopefully indicate with a cheery thumbs up that it can “go live”. Chances are that we have a staging environment where the client can see the build. But be honest, is this exactly the same as the production environment? It should be, but often it’s not. Often the staging environment is nothing more than a visible server with none of the optimisations, security, load balancing, caching, and other vital bits of machinery that we’ll need (and need to test) … | 2017 | Phil Hawksworth | philhawksworth | 2017-12-21T00:00:00+00:00 | https://24ways.org/2017/knowing-the-future/ | process |
| 121 | 121 | Hide And Seek in The Head | If you want your JavaScript-enhanced pages to remain accessible and understandable to scripted and noscript users alike, you have to think before you code. Which functionalities are required (ie. should work without JavaScript)? Which ones are merely nice-to-have (ie. can be scripted)? You should only start creating the site when you’ve taken these decisions. Special HTML elements Once you have a clear idea of what will work with and without JavaScript, you’ll likely find that you need a few HTML elements for the noscript version only. Take this example: A form has a nifty bit of Ajax that automatically and silently sends a request once the user enters something in a form field. However, in order to preserve accessibility, the user should also be able to submit the form normally. So the form should have a submit button in noscript browsers, but not when the browser supports sufficient JavaScript. Since the button is meant for noscript browsers, it must be hard-coded in the HTML: <input type="submit" value="Submit form" id="noScriptButton" /> When JavaScript is supported, it should be removed: var checkJS = [check JavaScript support]; window.onload = function () { if (!checkJS) return; document.getElementById('noScriptButton').style.display = 'none'; } Problem: the load event Although this will likely work fine in your testing environment, it’s not completely correct. What if a user with a modern, JavaScript-capable browser visits your page, but has to wait for a huge graphic to load? The load event fires only after all assets, including images, have been loaded. So this user will first see a submit button, but then all of a sudden it’s removed. That’s potentially confusing. Fortunately there’s a simple solution: play a bit of hide and seek in the <head>: var checkJS = [check JavaScript support]; if (checkJS) { document.write('<style>#noScriptButton{display: none}</style>'); } First, check if the browser supports enough JavaScript. If it does, document.write an extra <style> element that hides the b… | 2006 | Peter-Paul Koch | ppk | 2006-12-06T00:00:00+00:00 | https://24ways.org/2006/hide-and-seek-in-the-head/ | code |
| 36 | 36 | Naming Things | There are only two hard things in computer science: cache invalidation and naming things. Phil Karlton Being a professional web developer means taking responsibility for the code you write and ensuring it is comprehensible to others. Having a documented code style is one means of achieving this, although the size and type of project you’re working on will dictate the conventions used and how rigorously they are enforced. Working in-house may mean working with multiple developers, perhaps in distributed teams, who are all committing changes – possibly to a significant codebase – at the same time. Left unchecked, this codebase can become unwieldy. Coding conventions ensure everyone can contribute, and help build a product that works as a coherent whole. Even on smaller projects, perhaps working within an agency or by yourself, at some point the resulting product will need to be handed over to a third party. It’s sensible, therefore, to ensure that your code can be understood by those who’ll eventually take ownership of it. Put simply, code is read more often than it is written or changed. A consistent and predictable naming scheme can make code easier for other developers to understand, improve and maintain, presumably leaving them free to worry about cache invalidation. Let’s talk about semantics Names not only allow us to identify objects, but they can also help us describe the objects being identified. Semantics (the meaning or interpretation of words) is the cornerstone of standards-based web development. Using appropriate HTML elements allows us to create documents and applications that have implicit structural meaning. Thanks to HTML5, the vocabulary we can choose from has grown even larger. HTML elements provide one level of meaning: a widely accepted description of a document’s underlying structure. It’s only with the mutual agreement of browser vendors and developers that <p> indicates a paragraph. Yet (with the exception of widely accepted microdata and microformat schemas) only HTML elements co… | 2014 | Paul Lloyd | paulrobertlloyd | 2014-12-21T00:00:00+00:00 | https://24ways.org/2014/naming-things/ | code |
| 58 | 58 | Beyond the Style Guide | Much like baking a Christmas cake, designing for the web involves creating an experience in layers. Starting with a solid base that provides the core experience (the fruit cake), we can add further layers, each adding refinement (the marzipan) and delight (the icing). Don’t worry, this isn’t a misplaced cake recipe, but an evaluation of modular design and the role style guides can play in acknowledging these different concerns, be they presentational or programmatic. The auteur’s style guide Although trained as a graphic designer, it was only when I encountered the immediacy of the web that I felt truly empowered as a designer. Given a desire to control every aspect of the resulting experience, I slowly adopted the role of an auteur, exploring every part of the web stack: front-end to back-end, and everything in between. A few years ago, I dreaded using the command line. Today, the terminal is a permanent feature in my Dock. In straddling the realms of graphic design and programming, it’s the point at which they meet that I find most fascinating, with each dicipline valuing the creation of effective systems, be they for communication or code efficiency. Front-end style guides live at this intersection, demonstrating both the modularity of code and the application of visual design. Painting by numbers In our rush to build modular systems, design frameworks have grown in popularity. While enabling quick assembly, these come at the cost of originality and creative expression – perhaps one reason why we’re seeing the homogenisation of web design. In editorial design, layouts should accentuate content and present it in an engaging manner. Yet on the web we see a practice that seeks templated predictability. In ‘Design Machines’ Travis Gertz argued that (emphasis added): Design systems still feel like a novelty in screen-based design. We nerd out over grid systems and modular scales and obsess over style guides and pattern libraries. We’re pretty good at using them to build repeatable components and site-wide standard… | 2015 | Paul Lloyd | paulrobertlloyd | 2015-12-16T00:00:00+00:00 | https://24ways.org/2015/beyond-the-style-guide/ | design |
| 79 | 79 | Responsive Images: What We Thought We Needed | If you were to read a web designer’s Christmas wish list, it would likely include a solution for displaying images responsively. For those concerned about users downloading unnecessary image data, or serving images that look blurry on high resolution displays, finding a solution has become a frustrating quest. Having experimented with complex and sometimes devilish hacks, consensus is forming around defining new standards that could solve this problem. Two approaches have emerged. The <picture> element markup pattern was proposed by Mat Marquis and is now being developed by the Responsive Images Community Group. By providing a means of declaring multiple sources, authors could use media queries to control which version of an image is displayed and under what conditions: <picture width="500" height="500"> <source media="(min-width: 45em)" src="large.jpg"> <source media="(min-width: 18em)" src="med.jpg"> <source src="small.jpg"> <img src="small.jpg" alt=""> <p>Accessible text</p> </picture> A second proposal put forward by Apple, the srcset attribute, uses a more concise syntax intended for use with the <img> element, although it could be compatible with the <picture> element too. This would allow authors to provide a set of images, but with the decision on which to use left to the browser: <img src="fallback.jpg" alt="" srcset="small.jpg 640w 1x, small-hd.jpg 640w 2x, med.jpg 1x, med-hd.jpg 2x "> Enter Scrooge Men’s courses will foreshadow certain ends, to which, if persevered in, they must lead. Ebenezer Scrooge Given the complexity of this issue, there’s a heated debate about which is the best option. Yet code belies a certain truth. That both feature verbose and opaque syntax, I’m not sure either should find its way into the browser – especially as alternative approaches have yet to be fully explored. So, as if to dampen the festive cheer, here are five reasons why I believe both proposals are largely redundant. 1. We need better formats, not more markup As we move away from designs defi… | 2012 | Paul Lloyd | paulrobertlloyd | 2012-12-11T00:00:00+00:00 | https://24ways.org/2012/responsive-images-what-we-thought-we-needed/ | code |
| 252 | 252 | Turn Jekyll up to Eleventy | Sometimes it pays not to over complicate things. While many of the sites we use on a daily basis require relational databases to manage their content and dynamic pages to respond to user input, for smaller, simpler sites, serving pre-rendered static HTML is usually a much cheaper — and more secure — option. The JAMstack (JavaScript, reusable APIs, and prebuilt Markup) is a popular marketing term for this way of building websites, but in some ways it’s a return to how things were in the early days of the web, before developers started tinkering with CGI scripts or Personal HomePage. Indeed, my website has always served pre-rendered HTML; first with the aid of Movable Type and more recently using Jekyll, which Anna wrote about in 2013. By combining three approachable languages — Markdown for content, YAML for data and Liquid for templating — the ergonomics of Jekyll found broad appeal, influencing the design of the many static site generators that followed. But Jekyll is not without its faults. Aside from notoriously slow build times, it’s also built using Ruby. While this is an elegant programming language, it is yet another ecosystem to understand and manage, and often alongside one we already use: JavaScript. For all my time using Jekyll, I would think to myself “this, but in Node”. Thankfully, one of Santa’s elves (Zach Leatherman) granted my Atwoodian wish and placed such a static site generator under my tree. Introducing Eleventy Eleventy is a more flexible alternative Jekyll. Besides being written in Node, it’s less strict about how to organise files and, in addition to Liquid, supports other templating languages like EJS, Pug, Handlebars and Nunjucks. Best of all, its build times are significantly faster (with future optimisations promising further gains). As content is saved using the familiar combination of YAML front matter and Markdown, transitioning from Jekyll to Eleventy may seem like a reasonable idea. Yet as I’ve discovered, there are a few gotchas. If you’ve been considering making the switch, he… | 2018 | Paul Lloyd | paulrobertlloyd | 2018-12-11T00:00:00+00:00 | https://24ways.org/2018/turn-jekyll-up-to-eleventy/ | content |
| 266 | 266 | Collaborative Development for a Responsively Designed Web | In responsive web design we’ve found a technique that allows us to design for the web as a medium in its own right: one that presents a fluid, adaptable and ever changing canvas. Until this point, we gave little thought to the environment in which users will experience our work, caring more about the aggregate than the individual. The applications we use encourage rigid layouts, whilst linear processes focus on clients signing off paintings of websites that have little regard for behaviour and interactions. The handover of pristine, pixel-perfect creations to developers isn’t dissimilar to farting before exiting a crowded lift, leaving front-end developers scratching their heads as they fill in the inevitable gaps. If you haven’t already, I recommend reading Drew’s checklist of things to consider before handing over a design. Somehow, this broken methodology has survived for the last fifteen years or so. Even the advent of web standards has had little impact. Now, as we face an onslaught of different devices, the true universality of the web can no longer be ignored. Responsive web design is just the thin end of the wedge. Largely concerned with layout, its underlying philosophy could ignite a trend towards interfaces that adapt to any number of different variables: input methods, bandwidth availability, user preference – you name it! With such adaptability, a collaborative and iterative process is required. Ethan Marcotte, who worked with the team behind the responsive redesign of the Boston Globe website, talked about such an approach in his book: The responsive projects I’ve worked on have had a lot of success combining design and development into one hybrid phase, bringing the two teams into one highly collaborative group. Whilst their process still involved the creation of desktop-centric mock-ups, these were presented to the entire team early on, where questions about how pages might adapt and behave at different sizes were asked. Mock-ups were quickly converted into HTML prototypes, meaning furthe… | 2011 | Paul Lloyd | paulrobertlloyd | 2011-12-05T00:00:00+00:00 | https://24ways.org/2011/collaborative-development-for-a-responsively-designed-web/ | business |
| 219 | 219 | Speed Up Your Site with Delayed Content | Speed remains one of the most important factors influencing the success of any website, and the first rule of performance (according to Yahoo!) is reducing the number of HTTP requests. Over the last few years we’ve seen techniques like sprites and combo CSS/JavaScript files used to reduce the number of HTTP requests. But there’s one area where large numbers of HTTP requests are still a fact of life: the small avatars attached to the comments on articles like this one. Avatars Many sites like 24 ways use a fantastic service called Gravatar to provide user images. As a user, you can sign up to Gravatar, give them your e-mail address, and upload an image to represent you. Sites can then include your image by generating a one way hash of your e-mail address and using that to build an image URL. For example, the markup for the comments on this page looks something like this: <div> <h4><a href="http://allinthehead.com/"> <img src="http://www.gravatar.com/avatar.php?gravatar_id=13734b0cb20708f79e730809c29c3c48&size=100" class="gravatar" alt="" height="100" width="100" /> Drew McLellan </a></h4> <p>This is a great article!</p> </div> The Gravatar URL contains two parts. 100 is the size in pixels of the image we want. 13734b0cb20708f79e730809c29c3c48 is an MD5 digest of Drew’s e-mail address. Using MD5 means we can request an image for a user without sharing their e-mail address with anyone who views the source of the page. So what’s wrong with avatars? The problem is that a popular article can easily get hundreds of comments, and every one of them means another image has to be individually requested from Gravatar’s servers. Each request is small and the Gravatar servers are fast but, when you add them up, it can easily add seconds to the rendering time of a page. Worse, they can delay the loading of more important assets like the CSS required to render the main content of the page. These images aren’t critical to the page, and don’t need to be loaded up front. Let’s see if we can delay loading them until… | 2010 | Paul Hammond | paulhammond | 2010-12-18T00:00:00+00:00 | https://24ways.org/2010/speed-up-your-site-with-delayed-content/ | ux |
| 158 | 158 | 10 Ways To Get Design Approval | One of the most challenging parts of the web design process is getting design sign off. It can prove time consuming, demoralizing and if you are not careful can lead to a dissatisfied client. What is more you can end up with a design that you are ashamed to include in your portfolio. How then can you ensure that the design you produce is the one that gets built? How can you get the client to sign off on your design? Below are 10 tips learnt from years of bitter experience. 1. Define the role of the client and designer Many of the clients you work with will not have been involved in a web project before. Even if they have they may have worked in a very different way to what you would expect. Take the time at the beginning of the project to explain their role in the design of the site. The best approach is to emphasis that their job is to focus on the needs of their users and business. They should concentrate on the broad issues, while you worry about the details of layout, typography and colour scheme. By clarifying what you expect from the client, you help them to provide the right kind of input throughout the process. 2. Understand the business Before you open up Photoshop or put pen to paper, take the time to make sure you properly understand not only the brief but the organization behind the site. By understanding their business objectives, organizational structure and marketing strategy your design decisions will be better informed. You cannot rely upon the brief to provide all of the information you need. It is important to dig deeper and get as good an understanding of their business as possible. This information will prove invaluable when justifying your design decisions. 3. Understand the users We all like to think of ourselves as user centric designers, but exactly how much effort do you put into knowing your users before beginning the design process? Take the time to really understand them the best you can. Try to meet with some real prospective users and get to know their needs. Failing that… | 2007 | Paul Boag | paulboag | 2007-12-10T00:00:00+00:00 | https://24ways.org/2007/10-ways-to-get-design-approval/ | business |
| 176 | 176 | What makes a website successful? It might not be what you expect! | What makes some sites succeed and others fail? Put another way, when you are asked to redesign an existing website, what problems are you looking out for and where do you concentrate your efforts? I would argue that as web designers we spend too much time looking at the wrong kind of problem. I recently ran a free open door consultancy clinic to celebrate the launch of my new book (yes I know, two shameless plugs in one sentence). This involved various website owners volunteering their sites for review. Both myself and the audience then provided feedback. What quickly became apparent is that the feedback being given by the audience was biased towards design and development. Although their comments were excellent it focused almost exclusively on the quality of code, site aesthetics and usability. To address these issues in isolation is similar to treating symptoms and ignoring the underlying illness. Cure the illness not the symptoms Poor design, bad usability and terribly written code are symptoms of bigger problems. Often when we endeavour to address these symptoms, we meet resistance from our clients and become frustrated. This is because our clients are still struggling with fundamental concepts we take for granted. Before we can address issues of aesthetics, usability and code, we need to tackle business objectives, calls to action and user tasks. Without dealing with these fundamental principles our clients’ website will fail. Let me address each in turn: Understand the business objectives Do you ask your clients why they have a website? It feels like an obvious question. However, it is surprising how many clients do not have an answer. Without having a clear idea of the siteʼs business objectives, the client has no way to know whether it is succeeding. This means they have no justification for further investment and that leads to quibbling over every penny. However most importantly, without clearly defined business aims they have no standard against which to base their decisions. Everything beco… | 2009 | Paul Boag | paulboag | 2009-12-04T00:00:00+00:00 | https://24ways.org/2009/what-makes-a-website-successful/ | business |
| 229 | 229 | Sketching to Communicate | As a web designer I’ve always felt that I’d somehow cheated the system, having been absent on the day God handed out the ability to draw. I didn’t study fine art, I don’t have a natural talent to effortlessly knock out a realistic bowl of fruit beside a water jug, and yet somehow I’ve still managed to blag my way this far. I’m sure many of you may feel the same. I had no intention of becoming an artist, but to have enough skill to convey an idea in a drawing would be useful. Instead, my inadequate instrument would doodle drunkenly across the page leaving a web of unintelligible paths instead of the refined illustration I’d seen in my mind’s eye. This – and the natural scrawl of my handwriting – is fine (if somewhat frustrating) when it’s for my eyes only but, when sketching to communicate a concept to a client, such amateur art would be offered with a sense of embarrassment. So when I had the opportunity to take part in some sketching classes whilst at Clearleft I jumped at the chance. Why sketch? In UX workshops early on in a project’s life, sketching is a useful and efficient way to convey and record ideas. It’s disposable and inexpensive, but needn’t look amateur. A picture may be worth a thousand words, but a well executed sketch of how you’ll combine funny YouTube videos with elephants to make Lolephants.com could be worth millions in venture capital. Actually, that’s not bad… ;-) Although (as you will see) the basics of sketching are easy to master, the kudos you will receive from clients for being a ‘proper designer’ makes it worthwhile! Where to begin? Start by not buying yourself a sketch pad. If you were the type of child who ripped the first page out of a school exercise book and started again if you made even a tiny mistake (you’re not alone!), Wreck This Journal may offer a helping hand. Practicing on plain A4 paper instead of any ‘special’ notepad will make the process a whole lot easier, no matter how deliciously edible those Moleskines look. Do buy yourself a black fine-liner pen and a set … | 2010 | Paul Annett | paulannett | 2010-12-19T00:00:00+00:00 | https://24ways.org/2010/sketching-to-communicate/ | business |
| 188 | 188 | Don't Lose Your :focus | For many web designers, accessibility conjures up images of blind users with screenreaders, and the difficulties in making sites accessible to this particular audience. Of course, accessibility covers a wide range of situations that go beyond the extreme example of screenreader users. And while it’s true that making a complex site accessible can often be a daunting prospect, there are also many small things that don’t take anything more than a bit of judicious planning, are very easy to test (without having to buy expensive assistive technology), and can make all the difference to certain user groups. In this short article we’ll focus on keyboard accessibility and how careless use of CSS can potentially make your sites completely unusable. Keyboard Access Users who for whatever reason can’t use a mouse will employ a keyboard (or keyboard-like custom interface) to navigate around web pages. By default, they will use TAB and SHIFT + TAB to move from one focusable element (links, form controls and area) of a page to the next. Note: in OS X, you’ll first need to turn on full keyboard access under System Preferences > Keyboard and Mouse > Keyboard Shortcuts. Safari under Windows needs to have the option Press Tab to highlight each item on a webpage in Preferences > Advanced enabled. Opera is the odd one out, as it has a variety of keyboard navigation options – the most relevant here being spatial navigation via Shift+Down, Shift+Up, Shift+Left, and Shift+Right). But I Don’t Like Your Dotted Lines… To show users where they are within a page, browsers place an outline around the element that currently has focus. The “problem” with these default outlines is that some browsers (Internet Explorer and Firefox) also display them when a user clicks on a focusable element with the mouse. Particularly on sites that make extensive use of image replacement on links with “off left” techniques this can create very unsightly outlines that stretch from the replaced element all the way to the left edge of the browser. Outline … | 2009 | Patrick Lauke | patricklauke | 2009-12-09T00:00:00+00:00 | https://24ways.org/2009/dont-lose-your-focus/ | code |
| 331 | 331 | Splintered Striper | Back in March 2004, David F. Miller demonstrated a little bit of DOM scripting magic in his A List Apart article Zebra Tables. His script programmatically adds two alternating CSS background colours to table rows, making them more readable and visually pleasing, while saving the document author the tedious task of manually assigning the styling to large static data tables. Although David’s original script performs its duty well, it is nonetheless very specific and limited in its application. It only: works on a single table, identified by its id, with at least a single tbody section assigns a background colour allows two colours for odd and even rows acts on data cells, rather than rows, and then only if they have no class or background colour already defined Taking it further In a recent project I found myself needing to apply a striped effect to a medium sized unordered list. Instead of simply modifying the Zebra Tables code for this particular case, I decided to completely recode the script to make it more generic. Being more general purpose, the function in my splintered striper experiment is necessarily more complex. Where the original script only expected a single parameter (the id of the target table), the new function is called as follows: striper('[parent element tag]','[parent element class or null]','[child element tag]','[comma separated list of classes]') This new, fairly self-explanatory function: targets any type of parent element (and, if specified, only those with a certain class) assigns two or more classes (rather than just two background colours) to the child elements inside the parent preserves any existing classes already assigned to the child elements See it in action View the demonstration page for three usage examples. For simplicity’s sake, we’re making the calls to the striper function from the body’s onload attribute. In a real deployment situation, we would look at attaching a behaviour to the onload programmatically — just remember that, as we need to pass varia… | 2005 | Patrick Lauke | patricklauke | 2005-12-15T00:00:00+00:00 | https://24ways.org/2005/splintered-striper/ | code |
| 329 | 329 | Broader Border Corners | A note from the editors: Since this article was written the CSS border-radius property has become widely supported in browsers. It should be preferred to this image technique. A quick and easy recipe for turning those single-pixel borders that the kids love so much into into something a little less right-angled. Here’s the principle: We have a box with a one-pixel wide border around it. Inside that box is another box that has a little rounded-corner background image sitting snugly in one of its corners. The inner-box is then nudged out a bit so that it’s actually sitting on top of the outer box. If it’s all done properly, that little background image can mask the hard right angle of the default border of the outer-box, giving the impression that it actually has a rounded corner. Take An Image, Finely Chopped Add A Sprinkle of Markup <div id="content"> <p>Lorem ipsum etc. etc. etc.</p> </div> Throw In A Dollop of CSS #content { border: 1px solid #c03; } #content p { background: url(corner.gif) top left no-repeat; position: relative; left: -1px; top: -1px; padding: 1em; margin: 0; } Bubblin’ Hot The content div has a one-pixel wide red border around it. The paragraph is given a single instance of the background image, created to look like a one-pixel wide arc. The paragraph is shunted outside of the box – back one pixel and up one pixel – so that it is sitting over the div’s border. The white area of the image covers up that part of the border’s corner, and the arc meets up with the top and left border. Because, in this example, we’re applying a background image to a paragraph, its top margin needs to be zeroed so that it starts at the top of its container. Et voilà. Bon appétit. Extra Toppings If you want to apply a curve to each one of the corners and you run out of meaningful markup to hook the background images on to, throw some spans or divs in the mix (there’s nothing wrong … | 2005 | Patrick Griffiths | patrickgriffiths | 2005-12-14T00:00:00+00:00 | https://24ways.org/2005/broader-border-corners/ | design |
| 19 | 19 | In Their Own Write: Web Books and their Authors | The currency of written communication — words on the page, words on the screen — comprises many denominations. To further our ends in web design and development, we freely spend and receive several: tweets aphoristic and trenchant, banal and perfunctory; blog posts and articles that call us to action or reflection; anecdotes, asides, comments, essays, guides, how-tos, manuals, musings, notes, opinions, stories, thoughts, tips pro and not-so-pro. So many, many words. Our industry (so much more than this, but what on earth are we, collectively?), our community thrives on writing and sharing knowledge and experience. 24 ways is a case in point. Everyone can learn and contribute through reading and writing — it’s what we’ve always done. To web authors and readers seeking greater returns, though, broader culture has vouchsafed an enduring and singular artefact: the book. Last month I asked a small sample of web book authors if they would be prepared to answer a few questions; most of them kindly agreed. In spirit, the survey was informal: I had neither hypothesis nor unground axe. I work closely with writers — and yes, I’ve edited or copy-edited books by several of the authors I surveyed — and wanted to share their thoughts about what it was like to write a book (“…it was challenging to find a coherent narrative”), why they did it (“Who wouldn’t want to?”) and what they learned from the experience (“That I could!”). Reasons for writing a book In web development the connection between authors and readers is unusually close and immediate. Working in our medium precipitates a unity that’s rare elsewhere. Yet writing and publishing a book, even during the current books revolution, is something only a few of us attempt and it remains daunting and a little remote. What spurs an author to try it? For some, it’s a deeply held resistance to prevailing trends: I felt that designers and developers needed to be shaken out of what seemed to me had been years of stagnation. —Andrew Clarke Or even a desire to protect us from… | 2013 | Owen Gregory | owengregory | 2013-12-15T00:00:00+00:00 | https://24ways.org/2013/web-books/ | content |
| 285 | 285 | Composing the New Canon: Music, Harmony, Proportion | Ohne Musik wäre das Leben ein Irrtum —Friedrich NIETZSCHE, Götzen-Dämmerung, Sprüche und Pfeile 33, 1889 Somehow, music is hardcoded in human beings. It is something we understand and respond to without prior knowledge. Music exercises the emotions and our imaginative reflex, not just our hearing. It behaves so much like our emotions that music can seem to symbolize them, to bear them from one person to another. Not surprisingly, it conjures memories: the word music derives from Greek μουσική (mousike), art of the Muses, whose mythological mother was Mnemosyne, memory. But it can also summon up the blood, console the bereaved, inspire fanaticism, bolster governments and dissenters alike, help us learn, and make web designers dance. And what would Christmas be without music? Music moves us, often in ways we can’t explain. By some kind of alchemy, music frees us from the elaborate nuisance and inadequacy of words. Across the world and throughout recorded history – and no doubt well before that – people have listened and made (and made out to) music. [I]t appears probable that the progenitors of man, either the males or females or both sexes, before acquiring the power of expressing their mutual love in articulate language, endeavoured to charm each other with musical notes and rhythm. —Charles DARWIN, The Descent of Man, and Selection in Relation to Sex, 1871 It’s so integral to humankind, we’ve sent it into space as a totem for who we are. (Who knows? It might be important.) Music is essential, a universal compulsion; as Nietzsche wrote, without music life would be a mistake. Music, design and web design There are some obvious and notable similarities between music and visual design. Both can convey mood and evoke emotion but, even under close scrutiny, how they do that remains to a great extent mysterious. Each has formal qualities or parts that can be abstracted, analysed and discussed, often using the same terminology: composition, harmony, rhythm, repetition, form, theme; even colour, texture and ton… | 2011 | Owen Gregory | owengregory | 2011-12-09T00:00:00+00:00 | https://24ways.org/2011/composing-the-new-canon/ | design |
| 12 | 12 | Untangling Web Typography | When I was a carpenter, I noticed how homeowners often had this deer-in-the-headlights look when the contractor I worked for would ask them to make tons of decisions, seemingly all at once. Square or subway tile? Glass or ceramic? Traditional or modern trim details? Flat face or picture frame cabinets? Real wood or laminate flooring? Every day the decisions piled up and were usually made in the context of that room, or that part of that room. Rarely did the homeowner have the benefit of taking that particular decision in full view of the larger context of the project. And architectural plans? Sure, they lay out the broad strokes, but there is still so much to decide. Typography is similar. Designers try to make sites that are easy to use and understand visually. They labour over the details of line height, font size, line length, and font weights. They consider the relative merits of different typographical scales for applications versus content-driven sites. Frequently, designers consider all of this in the context of one page, feature, or view of an application. They are asked to make a million tiny decisions. Sometimes designers just bump up the font size until it looks right. I don’t see anything wrong with that. Instincts are important. Designing in context is easier. It’s OK to leave the big picture until later. Design a bunch of things, and then look for the patterns. You can’t always know everything up front. How does the current feature relate to all the other features on the site? For a large site, just like for a substantial remodel, the number of decisions you would need to internalize to make that knowable would be prohibitively large. When typography goes awry I should be honest. I know very little about typography. I struggle to understand vertical rhythm and the math in Tim Ahrens’s talks about the interaction between type design and rendering technology kind of melted my brain. I have an unusual perspective because I’m not the one making the design decisions, but I am the one implementing t… | 2013 | Nicole Sullivan | nicolesullivan | 2013-12-20T00:00:00+00:00 | https://24ways.org/2013/untangling-web-typography/ | design |
| 91 | 91 | Infinite Canvas: Moving Beyond the Page | Remember Web 2.0? I do. In fact, that phrase neatly bifurcates my life on the internet. Pre-2.0, I was occupied by chatting on AOL and eventually by learning HTML so I could build sites on Geocities. Around 2002, however, I saw a WYSIWYG demo in Dreamweaver. The instructor was dragging boxes and images around a canvas. With a few clicks he was able to build a dynamic, single-page interface. Coming from the world of tables and inline HTML styles, I was stunned. As I entered college the next year, the web was blossoming: broadband, Wi-Fi, mobile (proud PDA owner, right here), CSS, Ajax, Bloglines, Gmail and, soon, Google Maps. I was a technology fanatic and a hobbyist web developer. For me, the web had long been informational. It was now rapidly becoming something else, something more: sophisticated, presentational, actionable. In 2003 we watched as the internet changed. The predominant theme of those early Web 2.0 years was the withering of Internet Explorer 6 and the triumph of web standards. Upon cresting that mountain, we looked around and collectively breathed the rarefied air of pristine HMTL and CSS, uncontaminated by toxic hacks and forks – only to immediately begin hurtling down the other side at what is, frankly, terrifying speed. Ten years later, we are still riding that rocket. Our days (and nights) are spent cramming for exams on CSS3 and RWD and Sass and RESS. We are the proud, frazzled owners of tiny pocket computers that annihilate the best laptops we could have imagined, and the architects of websites that are no longer restricted to big screens nor even segregated by device. We dragoon our sites into working any time, anywhere. At this point, we can hardly ask the spec developers to slow down to allow us to catch our breath, nor should we. It is, without a doubt, a most wonderful time to be a web developer. But despite the newfound luxury of rounded corners, gradients, embeddable fonts, low-level graphics APIs, and, glory be, shadows, the canyon between HTML and native appears to be as wide as… | 2012 | Nathan Peretic | nathanperetic | 2012-12-21T00:00:00+00:00 | https://24ways.org/2012/infinite-canvas-moving-beyond-the-page/ | code |
| 75 | 75 | A Harder-Working Class | Class is only becoming more important. Focusing on its original definition as an attribute for grouping (or classifying) as well as linking HTML to CSS, recent front-end development practices are emphasizing class as a vessel for structured, modularized style packages. These patterns reduce the need for repetitive declarations that can seriously bloat file sizes, and instil human-readable understanding of how the interface, layout, and aesthetics are constructed. In the next handful of paragraphs, we will look at how these emerging practices – such as object-oriented CSS and SMACSS – are pushing the relevance of class. We will also explore how HTML and CSS architecture can be further simplified, performance can be boosted, and CSS utility sharpened by combining class with the attribute selector. A primer on attribute selectors While attribute selectors were introduced in the CSS 2 spec, they are still considered rather exotic. These well-established and well-supported features give us vastly improved flexibility in targeting elements in CSS, and offer us opportunities for smarter markup. With an attribute selector, you can directly style an element based on any of its unique – or uniquely shared – attributes, without the need for an ID or extra classes. Unlike pseudo-classes, pseudo-elements, and other exciting features of CSS3, attribute selectors do not require any browser-specific syntax or prefix, and are even supported in Internet Explorer 7. For example, say we want to target all anchor tags on a page that link to our homepage. Where otherwise we might need to manually identify and add classes to the HTML for these specific links, we could simply write: [href=index.html] { } This selector reads: target every element that has an href attribute of “index.html”. Attribute selectors are more faceted, though, as they also give us some very simple regular expression-like logic that helps further narrow (or widen) a selector’s scope. In our previous example, what if we wanted to also give indicative styl… | 2012 | Nathan Ford | nathanford | 2012-12-15T00:00:00+00:00 | https://24ways.org/2012/a-harder-working-class/ | code |
| 126 | 126 | Intricate Fluid Layouts in Three Easy Steps | The Year of the Script may have drawn attention away from CSS but building fluid, multi-column, cross-browser CSS layouts can still be as unpleasant as a lump of coal. Read on for a worry-free approach in three quick steps. The layout system I developed, YUI Grids CSS, has three components. They can be used together as we’ll see, or independently. The Three Easy Steps Choose fluid or fixed layout, and choose the width (in percents or pixels) of the page. Choose the size, orientation, and source-order of the main and secondary blocks of content. Choose the number of columns and how they distribute (for example 50%-50% or 25%-75%), using stackable and nestable grid structures. The Setup There are two prerequisites: We need to normalize the size of an em and opt into the browser rendering engine’s Strict Mode. Ems are a superior unit of measure for our case because they represent the current font size and grow as the user increases their font size setting. This flexibility—the container growing with the user’s wishes—means larger text doesn’t get crammed into an unresponsive container. We’ll use YUI Fonts CSS to set the base size because it provides consistent-yet-adaptive font-sizes while preserving user control. The second prerequisite is to opt into Strict Mode (more info on rendering modes) by declaring a Doctype complete with URI. You can choose XHTML or HTML, and Transitional or Strict. I prefer HTML 4.01 Strict, which looks like this: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> Including the CSS A single small CSS file powers a nearly-infinite number of layouts thanks to a recursive system and the interplay between the three distinct components. You could prune to a particular layout’s specific needs, but why bother when the complete file weighs scarcely 1.8kb uncompressed? Compressed, YUI Fonts and YUI Grids combine for a miniscule 0.9kb over the wire. You could save an HTTP request by concatenating the two CSS files, or by adding their contents … | 2006 | Nate Koechley | natekoechley | 2006-12-20T00:00:00+00:00 | https://24ways.org/2006/intricate-fluid-layouts/ | code |
| 123 | 123 | Fast and Simple Usability Testing | Everyone knows by now that they should test the usability of their applications, but still hardly anybody actually does it. In this article I’ll share some tips I’ve picked up for doing usability tests quickly and effectively. Relatively recent tools like Django and Ruby on Rails allow us to develop projects faster and to make significant changes later in the project timeline. Usability testing methods should now be adapted to fit this modern approach to development. When to test In an ideal world usability tests would be carried out frequently from an early stage of the project. Time and budget constraints lead this to be impractical; usability is often the first thing to get dropped from the project plan. If you can only test at one stage in the project, whatever the size, the most valuable time is before your first public beta — leaving long enough to fix issues and not so late that you can’t rethink your scope. There are three main categories of usability test: Testing design mockups Testing a new working application Testing established applications Each category requires a slightly different approach. For small modern web projects you are most likely to be testing a new working application. You will of course have already done functional tests so you won’t be worried about the user breaking things. The main differences between the categories apply in how you word The Script. Testing an established application is the most fun in my opinion. Humans are remarkably adaptable and rapidly develop coping strategies to work around usability issues in software they are forced to use. Uncovering these strategies may lead you to understand previously unspoken needs of your users. Often small changes to the application will have a dramatic affect on their everyday lives. Who to test When you have built a project to scratch your own itch, your intended audience will be people just like you. Test subjects in this case should be easy to find – friends, co-workers etc. This is not always the case; your users… | 2006 | Natalie Downe | nataliedowne | 2006-12-16T00:00:00+00:00 | https://24ways.org/2006/fast-and-simple-usability-testing/ | process |
Advanced export
JSON shape: default, array, newline-delimited
CREATE TABLE [articles] (
[title] TEXT ,
[contents] TEXT ,
[year] TEXT ,
[author] TEXT ,
[author_slug] TEXT ,
[published] TEXT ,
[url] TEXT ,
[topic] TEXT
);