| 305 |
CSS Writing Modes |
Since you may not have a lot of time, I’m going to start at the end, with the dessert.
You can use a little-known, yet important and powerful CSS property to make text run vertically. Like this.
Or instead of running text vertically, you can layout a set of icons or interface buttons in this way. Or, of course, with anything on your page.
The CSS I’ve applied makes the browser rethink the orientation of the world, and flow the layout of this element at a 90° angle to “normal”. Check out the live demo, highlight the headline, and see how the cursor is now sideways.
See the Pen Writing Mode Demo — Headline by Jen Simmons (@jensimmons) on CodePen.
The code for accomplishing this is pretty simple.
h1 {
writing-mode: vertical-rl;
}
That’s all it takes to switch the writing mode from the web’s default horizontal top-to-bottom mode to a vertical right-to-left mode. If you apply such code to the html element, the entire page is switched, affecting the scroll direction, too.
In my example above, I’m telling the browser that only the h1 will be in this vertical-rl mode, while the rest of my page stays in the default of horizontal-tb.
So now the dessert course is over. Let me serve up this whole meal, and explain the the CSS Writing Mode Specification.
Why learn about writing modes?
There are three reasons I’m teaching writing modes to everyone—including western audiences—and explaining the whole system, instead of quickly showing you a simple trick.
We live in a big, diverse world, and learning about other languages is fascinating. Many of you lay out pages in languages like Chinese, Japanese and Korean. Or you might be inspired to in the future.
Using writing-mode to turn bits sideways is cool. This CSS can be used in all kinds of creative ways, even if you are working only in English.
Most importantly, I’ve found understanding Writing Modes incredibly helpful when understanding Flexbox and CSS Grid. Before I learned Writing Mode, I felt like there was still a big hole in my knowledge, something I just didn’t get about why Grid and Flexbox work the way they do. Once I wrapped my head around Writing Modes, Grid and Flexbox got a lot easier. Suddenly the Alignment properties, align-* and justify-*, made sense.
Whether you know about it or not, the writing mode is the first building block of every layout we create. You can do what we’ve been doing for 25 years – and leave your page set to the default left-to-right direction, horizontal top-to-bottom writing mode. Or you can enter a world of new possibilities where content flows in other directions.
CSS properties
I’m going to focus on the CSS writing-mode property in this article. It has five possible options:
writing-mode: horizontal-tb;
writing-mode: vertical-rl;
writing-mode: vertical-lr;
writing-mode: sideways-rl;
writing-mode: sideways-lr;
The CSS Writing Modes Specification is designed to support a wide range of written languages in all our human and linguistic complexity. Which—spoiler alert—is pretty insanely complex. The global evolution of written languages has been anything but simple.
So I’ve got to start with explaining some basic concepts of web page layout and writing systems. Then I can show you what these CSS properties do.
Inline Direction, Block Direction, and Character Direction
In the world of the web, there’s a concept of ‘block’ and ‘inline’ layout. If you’ve ever written display: block or display: inline, you’ve leaned on these concepts.
In the default writing mode, blocks stack vertically starting at the top of the page and working their way down. Think of how a bunch of block-levels elements stack—like a bunch of a paragraphs—that’s the block direction.
Inline is how each line of text flows. The default on the web is from left to right, in horizontal lines. Imagine this text that you are reading right now, being typed out one character at a time on a typewriter. That’s the inline direction.
The character direction is which way the characters point. If you type a capital “A” for instance, on which side is the top of the letter? Different languages can point in different directions. Most languages have their characters pointing towards the top of the page, but not all.
Put all three together, and you start to see how they work as a system.
The default settings for the web work like this.
Now that we know what block, inline, and character directions mean, let’s see how they are used in different writing systems from around the world.
The four writing systems of CSS Writing Modes
The CSS Writing Modes Specification handles all the use cases for four major writing systems; Latin, Arabic, Han and Mongolian.
Latin-based systems
One writing system dominates the world more than any other, reportedly covering about 70% of the world’s population.
The text is horizontal, running from left to right, or LTR. The block direction runs from top to bottom.
It’s called the Latin-based system because it includes all languages that use the Latin alphabet, including English, Spanish, German, French, and many others. But there are many non-Latin-alphabet languages that also use this system, including Greek, Cyrillic (Russian, Ukrainian, Bulgarian, Serbian, etc.), and Brahmic scripts (Devanagari, Thai, Tibetan), and many more.
You don’t need to do anything in your CSS to trigger this mode. This is the default.
Best practices, however, dictate that you declare in your opening <html> element which language and which direction (LTR or RTL) you are using. This website, for instance, uses <html lang='en-gb' dir='ltr'> to let the browser know this content is published in Great Britian’s version of English, in a left to right direction.
Arabic-based systems
Arabic, Hebrew and a few other languages run the inline direction from right to left. This is commonly known as RTL.
Note that the inline direction still runs horizontally. The block direction runs from top to bottom. And the characters are upright.
It’s not just the flow of text that runs from right to left, but everything about the layout of the website. The upper right-hand corner is the starting position. Important things are on the right. The eyes travel from right to left. So, typically RTL websites use layouts that are just like LTR websites, only flipped.
On websites that support both LTR and RTL, like the United Nations’ site at un.org, the two layouts are mirror images of each other.
For many web developers, our experiences with internationalization have focused solely on supporting Arabic and Hebrew script.
CSS layout hacks for internationalization & RTL
To prepare an LTR project to support RTL, developers have had to create all sorts of hacks. For example, the Drupal community started a convention of marking every margin-left and -right, every padding-left and -right, every float: left and float: right with the comment /* LTR */. Then later developers could search for each instance of that exact comment, and create stylesheets to override each left with right, and vice versa. It’s a tedious and error prone way to work. CSS itself needed a better way to let web developers write their layout code once, and easily switch language directions with a single command.
Our new CSS layout system does exactly that. Flexbox, Grid and Alignment use start and end instead of left and right. This lets us define everything in relationship to the writing system, and switch directions easily. By writing justify-content: flex-start, justify-items: end, and eventually margin-inline-start: 1rem we have code that doesn’t need to be changed.
This is a much better way to work. I know it can be confusing to think through start and end as replacements for left and right. But it’s better for any multiligual project, and it’s better for the web as a whole.
Sadly, I’ve seen CSS preprocessor tools that claim to “fix” the new CSS layout system by getting rid of start and end and bringing back left and right. They want you to use their tool, write justify-content: left, and feel self-righteous. It seems some folks think the new way of working is broken and should be discarded. It was created, however, to fulfill real needs. And to reflect a global internet. As Bruce Lawson says, WWW stands for the World Wide Web, not the Wealthy Western Web. Please don’t try to convince the industry that there’s something wrong with no longer being biased towards western culture. Instead, spread the word about why this new system is here.
Spend a bit of time drilling the concept of inline and block into your head, and getting used to start and end. It will be second nature soon enough.
I’ve also seen CSS preprocessors that let us use this new way of thinking today, even as all the parts aren’t fully supported by browsers yet. Some tools let you write text-align: start instead of text-align: left, and let the preprocessor handle things for you. That is terrific, in my opinion. A great use of the power of a preprocessor to help us switch over now.
But let’s get back to RTL.
How to declare your direction
You don’t want to use CSS to tell the browser to switch from an LTR language to RTL. You want to do this in your HTML. That way the browser has the information it needs to display the document even if the CSS doesn’t load.
This is accomplished mainly on the html element. You should also declare your main language. As I mentioned above, the 24 ways website is using <html lang='en-gb' dir='ltr'> to declare the LTR direction and the use of British English. The UN Arabic website uses <html lang='ar' dir='rtl'>to declare the site as an Arabic site, using a RTL layout.
Things get more complicated when you’ve got a page with a mix of languages. But I’m not going to get into all of that, since this article is focused on CSS and layouts, not explaining everything about internationalization.
Let me just leave direction here by noting that much of the heavy work of laying out the characters which make up each word is handled by Unicode. If you are interested in learning more about LTR, RTL and bidirectional text, watch this video: Introduction to Bidirectional Text, a presentation by Elika Etemad.
Meanwhile, let’s get back to CSS.
The writing mode CSS for Latin-based and Arabic-based systems
For both of these systems—Latin-based and Arabic-based, whether LTR or RTL—the same CSS property applies for specifying the writing mode: writing-mode: horizontal-tb. That’s because in both systems, the inline text flow is horizontal, while the block direction is top-to-bottom. This is expressed as horizontal-tb.
horizontal-tb is the default writing mode for the web, so you don’t need to specify it unless you are overriding something else higher up in the cascade. You can just imagine that every site you’ve ever built came with:
html {
writing-mode: horizontal-tb;
}
Now let’s turn our attention to the vertical writing systems.
Han-based systems
This is where things start to get interesting.
Han-based writing systems include CJK languages, Chinese, Japanese, Korean and others. There are two options for laying out a page, and sometimes both are used at the same time.
Much of CJK text is laid out like Latin-based languages, with a horizontal top-to-bottom block direction, and a left-to-right inline direction. This is the more modern way to doing things, started in the 20th century in many places, and further pushed into domination by the computer and later the web.
The CSS to do this bit of the layouts is the same as above:
section {
writing-mode: horizontal-tb;
}
Or, you know, do nothing, and get that result as a default.
Alternatively Han-based languages can be laid out in a vertical writing mode, where the inline direction runs vertically, and the block direction goes from right to left.
See both options in this diagram:
Note that the horizontal text flows from left to right, while the vertical text flows from right to left. Wild, eh?
This Japanese issue of Vogue magazine is using a mix of writing modes. The cover opens on the left spine, opposite of what an English magazine does.
This page mixes English and Japanese, and typesets the Japanese text in both horizontal and vertical modes. Under the title “Richard Stark” in red, you can see a passage that’s horizontal-tb and LTR, while the longer passage of text at the bottom of the page is typeset vertical-rl. The red enlarged cap marks the beginning of that passage. The long headline above the vertical text is typeset LTR, horizontal-tb.
The details of how to set the default of the whole page will depend on your use case. But each element, each headline, each section, each article can be marked to flow the opposite of the default however you’d like.
For example, perhaps you leave the default as horizontal-tb, and specify your vertical elements like this:
div.articletext {
writing-mode: vertical-rl;
}
Or alternatively you could change the default for the page to a vertical orientation, and then set specific elements to horizontal-tb, like this:
html {
writing-mode: vertical-rl;
}
h2, .photocaptions, section {
writing-mode: horizontal-tb;
}
If your page has a sideways scroll, then the writing mode will determine whether the page loads with upper left corner as the starting point, and scroll to the right (horizontal-tb as we are used to), or if the page loads with the upper right corner as the starting point, scrolling to the left to display overflow. Here’s an example of that change in scrolling direction, in a CSS Writing Mode demo by Chen Hui Jing. Check out her demo — you can switch from horizontal to vertical writing modes with a checkbox and see the difference.
Mongolian-based systems
Now, hopefully so far all of this kind of makes sense. It might be a bit more complicated than expected, but it’s not so hard. Well, enter the Mongolian-based systems.
Mongolian is also a vertical script language. Text runs vertically down the page. Just like Han-based systems. There are two major differences. First, the block direction runs the other way. In Mongolian, block-level elements stack from left to right.
Here’s a drawing of how Wikipedia would look in Mongolian if it were laid out correctly.
Perhaps the Mongolian version of Wikipedia will be redone with this layout.
Now you might think, that doesn’t look so weird. Tilt your head to the left, and it’s very familiar. The block direction starts on the left side of the screen and goes to the right. The inline direction starts on the top of the page and moves to the bottom (similar to RTL text, just turned 90° counter-clockwise). But here comes the other huge difference. The character direction is “upside down”. The top of the Mongolian characters are not pointing to the left, towards the start edge of the block direction. They point to the right. Like this:
Now you might be tempted to ignore all this. Perhaps you don’t expect to be typesetting Mongolian content anytime soon. But here’s why this is important for everyone — the way Mongolian works defines the results writing-mode: vertical-lr. And it means we cannot use vertical-lr for typesetting content in other languages in the way we might otherwise expect.
If we took what we know about vertical-rl and guessed how vertical-lr works, we might imagine this:
But that’s wrong. Here’s how they actually compare:
See the unexpected situation? In both writing-mode: vertical-rl and writing-mode: vertical-lr latin text is rotated clockwise. Neither writing mode let’s us rotate text counter-clockwise.
If you are typesetting Mongolian content, apply this CSS in the same way you would apply writing-mode to Han-based writing systems. To the whole page on the html element, or to specific pages of the page like this:
section {
writing-mode: vertical-lr;
}
Now, if you are using writing-mode for a graphic design effect on a language that is otherwise typesets horizontally, I don’t think writing-mode: vertical-lr is useful. If the text wraps onto two lines, it stacks in a very unexpected way. So I’ve sort of obliterated it from my toolkit. I find myself using writing-mode: vertical-rl a lot. And never using -lr. Hm.
Writing modes for graphic design
So how do we use writing-mode to turn English headlines sideways? We could rely on transform: rotate()
Here are two examples, one for each direction. (By the way, each of these demos use CSS Grid for their overall layout, so be sure to test them in a browser that supports CSS Grid, like Firefox Nightly.)
In this demo 4A, the text is rotated clockwise using this code:
h1 {
writing-mode: vertical-rl;
}
In this demo 4B, the text is rotated counter-clockwise using this code:
h1 {
writing-mode: vertical-rl;
transform: rotate(180deg);
text-align: right;
}
I use vertical-rl to rotate the text so that it takes up the proper amount of space in the overall flow of the layout. Then I rotate it 180° to spin it around to the other direction. And then I use text-align: right to get it to rise up to the top of it’s container. This feels like a hack, but it’s a hack that works.
Now what I would like to do instead is use another CSS value that was designed for this use case — one of the two other options for writing mode.
If I could, I would lay out example 4A with:
h1 {
writing-mode: sideways-rl;
}
And layout example 4B with:
h1 {
writing-mode: sideways-lr;
}
The problem is that these two values are only supported in Firefox. None of the other browsers recognize sideways-*. Which means we can’t really use it yet.
In general, the writing-mode property is very well supported across browsers. So I’ll use writing-mode: vertical-rl for now, with the transform: rotate(180deg); hack to fake the other direction.
There’s much more to what we can do with the CSS designed to support multiple languages, but I’m going to stop with this intermediate introduction.
If you do want a bit more of a taste, look at this example that adds text-orientation: upright; to the mix — turning the individual letters of the latin font to be upright instead of sideways.
It’s this demo 4C, with this CSS applied:
h1 {
writing-mode: vertical-rl;
text-orientation: upright;
text-transform: uppercase;
letter-spacing: -25px;
}
You can check out all my Writing Modes demos at labs.jensimmons.com/#writing-modes.
I’ll leave you with this last demo. One that applies a vertical writing mode to the sub headlines of a long article. I like how small details like this can really bring a fresh feeling to the content.
See the Pen Writing Mode Demo — Article Subheadlines by Jen Simmons (@jensimmons) on CodePen. |
2016 |
Jen Simmons |
jensimmons |
2016-12-23T00:00:00+00:00 |
https://24ways.org/2016/css-writing-modes/ |
code |
| 99 |
A Christmas hCard From Me To You |
So apparently Christmas is coming. And what is Christmas all about? Well, cleaning out your address book, of course! What better time to go through your contacts, making sure everyone’s details are up date and that you’ve deleted all those nasty clients who never paid on time?
It’s also a good time to make sure your current clients and colleagues have your most up-to-date details, so instead of filling up their inboxes with e-cards, why not send them something useful? Something like a… vCard! (See what I did there?)
Just in case you’ve been working in a magical toy factory in the upper reaches of Scandinavia for the last few years, I’m going to tell you that now would also be the perfect time to get into microformats. Using the hCard format, we’ll build a very simple web page and markup our contact details in such a way that they’ll be understood by microformats plugins, like Operator or Tails for Firefox, or the cross-browser Microformats Bookmarklet.
Oh, and because Christmas is all about dressing up and being silly, we’ll make the whole thing look nice and have a bit of fun with some CSS3 progressive enhancement.
If you can’t wait to see what we end up with, you can preview it here.
Step 1: Contact Details
First, let’s decide what details we want to put on the page. I’d put my full name, my email address, my phone number, and my postal address, but I’d rather not get surprise visits from strangers when I’m fannying about with my baubles, so I’m going to use Father Christmas instead (that’s Santa to you Yanks).
Father Christmas
fatherchristmas@elliotjaystocks.com
25 Laughingallthe Way
Snow Falls
Lapland
Finland
010 60 58 000
Step 2: hCard Creator
Now I’m not sure about you, but I rather like getting the magical robot pixies to do the work for me, so head on over to the hCard Creator and put those pixies to work! Pop in your details and they’ll give you some nice microformatted HTML in turn.
<div id="hcard-Father-Christmas" class="vcard">
<a class="url fn" href="http://elliotjaystocks.com/fatherchristmas">Father Christmas</a>
<a class="email" href="mailto:fatherchristmas@elliotjaystocks.com"> fatherchristmas@elliotjaystocks.com</a>
<div class="adr">
<div class="street-address">25 Laughingallthe Way</div>
<span class="locality">Snow Falls</span>
,
<span class="region">Lapland</span>
,
<span class="postal-code">FI-00101</span>
<span class="country-name">Finland</span>
</div>
<div class="tel">010 60 58 000</div>
<p style="font-size:smaller;">This <a href="http://microformats.org/wiki/hcard">hCard</a> created with the <a href="http://microformats.org/code/hcard/creator">hCard creator</a>.</p>
</div>
Step 3: Editing The Code
One of the great things about microformats is that you can use pretty much whichever HTML tags you want, so just because the hCard Creator Fairies say something should be wrapped in a <span> doesn’t mean you can’t change it to a <blink>. Actually, no, don’t do that. That’s not even excusable at Christmas.
I personally have a penchant for marking up each line of an address inside a <li> tag, where the parent url retains the class of adr. As long as you keep the class names the same, you’ll be fine.
<div id="hcard-Father-Christmas" class="vcard">
<h1><a class="url fn" href="http://elliotjaystocks.com/fatherchristmas">Father Christmas </a></h1>
<a class="email" href="mailto:fatherchristmas@elliotjaystocks.com?subject=Here, have some Christmas cheer!">fatherchristmas@elliotjaystocks.com</a>
<ul class="adr">
<li class="street-address">25 Laughingallthe Way</li>
<li class="locality">Snow Falls</li>
<li class="region">Lapland</li>
<li class="postal-code">FI-00101</li>
<li class="country-name">Finland</li>
</ul>
<span class="tel">010 60 58 000</span>
</div>
Step 4: Testing The Microformats
With our microformats in place, now would be a good time to test that they’re working before we start making things look pretty. If you’re on Firefox, you can install the Operator or Tails extensions, but if you’re on another browser, just add the Microformats Bookmarklet. Regardless of your choice, the results is the same: if you’ve code microformatted content on a web page, one of these bad boys should pick it up for you and allow you to export the contact info. Give it a try and you should see father Christmas appearing in your address book of choice. Now you’ll never forget where to send those Christmas lists!
Step 5: Some Extra Markup
One of the first things we’re going to do is put a photo of Father Christmas on the hCard. We’ll be using CSS to apply a background image to a div, so we’ll be needing an extra div with a class name of “photo”. In turn, we’ll wrap the text-based elements of our hCard inside a div cunningly called “text”. Unfortunately, because of the float technique we’ll be using, we’ll have to use one of those nasty float-clearing techniques. I shall call this “christmas-cheer”, since that is what its presence will inevitably bring, of course.
Oh, and let’s add a bit of text to give the page context, too:
<p>Send your Christmas lists my way...</p>
<div id="hcard-Father-Christmas" class="vcard">
<div class="text">
<h1><a class="url fn" href="http://elliotjaystocks.com/fatherchristmas">Father Christmas </a></h1>
<a class="email" href="mailto:fatherchristmas@elliotjaystocks.com?subject=Here, have some Christmas cheer!">fatherchristmas@elliotjaystocks.com</a>
<ul class="adr">
<li class="street-address">25 Laughingallthe Way</li>
<li class="locality">Snow Falls</li>
<li class="region">Lapland</li>
<li class="postal-code">FI-00101</li>
<li class="country-name">Finland</li>
</ul>
<span class="tel">010 60 58 000</span>
</div>
<div class="photo"></div>
<br class="christmas-cheer" />
</div>
<div class="credits">
<p>A tutorial by <a href="http://elliotjaystocks.com">Elliot Jay Stocks</a> for <a href="http://24ways.org/">24 Ways</a></p>
<p>Background: <a href="http://sxc.hu/photo/1108741">stock.xchng</a> | Father Christmas: <a href="http://istockphoto.com/file_closeup/people/4575943-active-santa.php?id=4575943">iStockPhoto</a></p>
</div>
Step 6: Some Christmas Sparkle
So far, our hCard-housing web page is slightly less than inspiring, isn’t it? It’s time to add a bit of CSS. There’s nothing particularly radical going on here; just a simple layout, some basic typographic treatment, and the placement of the Father Christmas photo. I’d usually use a more thorough CSS reset like the one found in the YUI or Eric Meyer’s, but for this basic page, the simple * solution will do.
Check out the step 6 demo to see our basic styles in place.
From this…
… to this:
Step 7: Fun With imagery
Now it’s time to introduce a repeating background image to the <body> element. This will seamlessly repeat for as wide as the browser window becomes.
But that’s fairly straightforward. How about having some fun with the Father Christmas image? If you look at the image file itself, you’ll see that it’s twice as wide as the area we can see and contains a ‘hidden’ photo of our rather camp St. Nick.
As a light-hearted visual… er… ‘treat’ for users who move their mouse over the image, we move the position of the background image on the “photo” div. Check out the step 7 demo to see it working.
Step 8: Progressive Enhancement
Finally, this fun little project is a great opportunity for us to mess around with some advanced CSS features (some from the CSS3 spec) that we rarely get to use on client projects. (Don’t forget: no Christmas pressies for clients who want you to support IE6!)
Here are the rules we’re using to give some browsers a superior viewing experience:
@font-face allows us to use Jos Buivenga’s free font ‘Fertigo Pro’ on all text;
text-shadow adds a little emphasis on the opening paragraph;
body > p:first-child causes only the first paragraph to receive this treatment;
border-radius created rounded corners on our main div and the links within it;
and webkit-transition allows us to gently fade in between the default and hover states of those links.
And with that, we’re done! You can see the results here. It’s time to customise the page to your liking, upload it to your site, and send out the URL. And do it quickly, because I’m sure you’ve got some last-minute Christmas shopping to finish off! |
2008 |
Elliot Jay Stocks |
elliotjaystocks |
2008-12-10T00:00:00+00:00 |
https://24ways.org/2008/a-christmas-hcard-from-me-to-you/ |
code |
| 223 |
Calculating Color Contrast |
Some websites and services allow you to customize your profile by uploading pictures, changing the background color or other aspects of the design. As a customer, this personalization turns a web app into your little nest where you store your data. As a designer, letting your customers have free rein over the layout and design is a scary prospect. So what happens to all the stock text and images that are designed to work on nice white backgrounds? Even the Mac only lets you choose between two colors for the OS, blue or graphite! Opening up the ability to customize your site’s color scheme can be a recipe for disaster unless you are flexible and understand how to find maximum color contrasts.
In this article I will walk you through two simple equations to determine if you should be using white or black text depending on the color of the background. The equations are both easy to implement and produce similar results. It isn’t a matter of which is better, but more the fact that you are using one at all! That way, even with the craziest of Geocities color schemes that your customers choose, at least your text will still be readable.
Let’s have a look at a range of various possible colors. Maybe these are pre-made color schemes, corporate colors, or plucked from an image.
Now that we have these potential background colors and their hex values, we need to find out whether the corresponding text should be in white or black, based on which has a higher contrast, therefore affording the best readability. This can be done at runtime with JavaScript or in the back-end before the HTML is served up.
There are two functions I want to compare. The first, I call ’50%’. It takes the hex value and compares it to the value halfway between pure black and pure white. If the hex value is less than half, meaning it is on the darker side of the spectrum, it returns white as the text color. If the result is greater than half, it’s on the lighter side of the spectrum and returns black as the text value.
In PHP:
function getContrast50($hexcolor){
return (hexdec($hexcolor) > 0xffffff/2) ? 'black':'white';
}
In JavaScript:
function getContrast50(hexcolor){
return (parseInt(hexcolor, 16) > 0xffffff/2) ? 'black':'white';
}
It doesn’t get much simpler than that! The function converts the six-character hex color into an integer and compares that to one half the integer value of pure white. The function is easy to remember, but is naive when it comes to understanding how we perceive parts of the spectrum. Different wavelengths have greater or lesser impact on the contrast.
The second equation is called ‘YIQ’ because it converts the RGB color space into YIQ, which takes into account the different impacts of its constituent parts. Again, the equation returns white or black and it’s also very easy to implement.
In PHP:
function getContrastYIQ($hexcolor){
$r = hexdec(substr($hexcolor,0,2));
$g = hexdec(substr($hexcolor,2,2));
$b = hexdec(substr($hexcolor,4,2));
$yiq = (($r*299)+($g*587)+($b*114))/1000;
return ($yiq >= 128) ? 'black' : 'white';
}
In JavaScript:
function getContrastYIQ(hexcolor){
var r = parseInt(hexcolor.substr(0,2),16);
var g = parseInt(hexcolor.substr(2,2),16);
var b = parseInt(hexcolor.substr(4,2),16);
var yiq = ((r*299)+(g*587)+(b*114))/1000;
return (yiq >= 128) ? 'black' : 'white';
}
You’ll notice first that we have broken down the hex value into separate RGB values. This is important because each of these channels is scaled in accordance to its visual impact. Once everything is scaled and normalized, it will be in a range between zero and 255. Much like the previous ’50%’ function, we now need to check if the input is above or below halfway. Depending on where that value is, we’ll return the corresponding highest contrasting color.
That’s it: two simple contrast equations which work really well to determine the best readability.
If you are interested in learning more, the W3C has a few documents about color contrast and how to determine if there is enough contrast between any two colors. This is important for accessibility to make sure there is enough contrast between your text and link colors and the background.
There is also a great article by Kevin Hale on Particletree about his experience with choosing light or dark themes. To round it out, Jonathan Snook created a color contrast picker which allows you to play with RGB sliders to get values for YIQ, contrast and others. That way you can quickly fiddle with the knobs to find the right balance.
Comparing results
Let’s revisit our color schemes and see which text color is recommended for maximum contrast based on these two equations.
If we use the simple ’50%’ contrast function, we can see that it recommends black against all the colors except the dark green and purple on the second row. In general, the equation feels the colors are light and that black is a better choice for the text.
The more complex ‘YIQ’ function, with its weighted colors, has slightly different suggestions. White text is still recommended for the very dark colors, but there are some surprises. The red and pink values show white text rather than black. This equation takes into account the weight of the red value and determines that the hue is dark enough for white text to show the most contrast.
As you can see, the two contrast algorithms agree most of the time. There are some instances where they conflict, but overall you can use the equation that you prefer. I don’t think it is a major issue if some edge-case colors get one contrast over another, they are still very readable.
Now let’s look at some common colors and then see how the two functions compare. You can quickly see that they do pretty well across the whole spectrum.
In the first few shades of grey, the white and black contrasts make sense, but as we test other colors in the spectrum, we do get some unexpected deviation. Pure red #FF0000 has a flip-flop. This is due to how the ‘YIQ’ function weights the RGB parts. While you might have a personal preference for one style over another, both are justifiable.
In this second round of colors, we go deeper into the spectrum, off the beaten track. Again, most of the time the contrasting algorithms are in sync, but every once in a while they disagree. You can select which you prefer, neither of which is unreadable.
Conclusion
Contrast in color is important, especially if you cede all control and take a hands-off approach to the design. It is important to select smart defaults by making the contrast between colors as high as possible. This makes it easier for your customers to read, increases accessibility and is generally just easier on the eyes.
Sure, there are plenty of other equations out there to determine contrast; what is most important is that you pick one and implement it into your system.
So, go ahead and experiment with color in your design. You now know how easy it is to guarantee that your text will be the most readable in any circumstance. |
2010 |
Brian Suda |
briansuda |
2010-12-24T00:00:00+00:00 |
https://24ways.org/2010/calculating-color-contrast/ |
code |
| 55 |
How Tabs Should Work |
Tabs in browsers (not browser tabs) are one of the oldest custom UI elements in a browser that I can think of. They’ve been done to death. But, sadly, most of the time I come across them, the tabs have been badly, or rather partially, implemented.
So this post is my definition of how a tabbing system should work, and one approach of implementing that.
But… tabs are easy, right?
I’ve been writing code for tabbing systems in JavaScript for coming up on a decade, and at one point I was pretty proud of how small I could make the JavaScript for the tabbing system:
var tabs = $('.tab').click(function () {
tabs.hide().filter(this.hash).show();
}).map(function () {
return $(this.hash)[0];
});
$('.tab:first').click();
Simple, right? Nearly fits in a tweet (ignoring the whole jQuery library…). Still, it’s riddled with problems that make it a far from perfect solution.
Requirements: what makes the perfect tab?
All content is navigable and available without JavaScript (crawler-compatible and low JS-compatible).
ARIA roles.
The tabs are anchor links that:
are clickable
have block layout
have their href pointing to the id of the panel element
use the correct cursor (i.e. cursor: pointer).
Since tabs are clickable, the user can open in a new tab/window and the page correctly loads with the correct tab open.
Right-clicking (and Shift-clicking) doesn’t cause the tab to be selected.
Native browser Back/Forward button correctly changes the state of the selected tab (think about it working exactly as if there were no JavaScript in place).
The first three points are all to do with the semantics of the markup and how the markup has been styled. I think it’s easy to do a good job by thinking of tabs as links, and not as some part of an application. Links are navigable, and they should work the same way other links on the page work.
The last three points are JavaScript problems. Let’s investigate that.
The shitmus test
Like a litmus test, here’s a couple of quick ways you can tell if a tabbing system is poorly implemented:
Change tab, then use the Back button (or keyboard shortcut) and it breaks
The tab isn’t a link, so you can’t open it in a new tab
These two basic things are, to me, the bare minimum that a tabbing system should have.
Why is this important?
The people who push their so-called native apps on users can’t have more reasons why the web sucks. If something as basic as a tab doesn’t work, obviously there’s more ammo to push a closed native app or platform on your users.
If you’re going to be a web developer, one of your responsibilities is to maintain established interactivity paradigms. This doesn’t mean don’t innovate. But it does mean: stop fucking up my scrolling experience with your poorly executed scroll effects. </rant> :breath:
URI fragment, absolute URL or query string?
A URI fragment (AKA the # hash bit) would be using mysite.com/config#content to show the content panel. A fully addressable URL would be mysite.com/config/content. Using a query string (by way of filtering the page): mysite.com/config?tab=content.
This decision really depends on the context of your tabbing system. For something like GitHub’s tabs to view a pull request, it makes sense that the full URL changes.
For our problem though, I want to solve the issue when the page doesn’t do a full URL update; that is, your regular run-of-the-mill tabbing system.
I used to be from the school of using the hash to show the correct tab, but I’ve recently been exploring whether the query string can be used. The biggest reason is that multiple hashes don’t work, and comma-separated hash fragments don’t make any sense to control multiple tabs (since it doesn’t actually link to anything).
For this article, I’ll keep focused on using a single tabbing system and a hash on the URL to control the tabs.
Markup
I’m going to assume subcontent, so my markup would look like this (yes, this is a cat demo…):
<ul class="tabs">
<li><a class="tab" href="#dizzy">Dizzy</a></li>
<li><a class="tab" href="#ninja">Ninja</a></li>
<li><a class="tab" href="#missy">Missy</a></li>
</ul>
<div id="dizzy">
<!-- panel content -->
</div>
<div id="ninja">
<!-- panel content -->
</div>
<div id="missy">
<!-- panel content -->
</div>
It’s important to note that in the markup the link used for an individual tab references its panel content using the hash, pointing to the id on the panel. This will allow our content to connect up without JavaScript and give us a bunch of features for free, which we’ll see once we’re on to writing the code.
URL-driven tabbing systems
Instead of making the code responsive to the user’s input, we’re going to exclusively use the browser URL and the hashchange event on the window to drive this tabbing system. This way we get Back button support for free.
With that in mind, let’s start building up our code. I’ll assume we have the jQuery library, but I’ve also provided the full code working without a library (vanilla, if you will), but it depends on relatively new (polyfillable) tech like classList and dataset (which generally have IE10 and all other browser support).
Note that I’ll start with the simplest solution, and I’ll refactor the code as I go along, like in places where I keep calling jQuery selectors.
function show(id) {
// remove the selected class from the tabs,
// and add it back to the one the user selected
$('.tab').removeClass('selected').filter(function () {
return (this.hash === id);
}).addClass('selected');
// now hide all the panels, then filter to
// the one we're interested in, and show it
$('.panel').hide().filter(id).show();
}
$(window).on('hashchange', function () {
show(location.hash);
});
// initialise by showing the first panel
show('#dizzy');
This works pretty well for such little code. Notice that we don’t have any click handlers for the user and the Back button works right out of the box.
However, there’s a number of problems we need to fix:
The initialised tab is hard-coded to the first panel, rather than what’s on the URL.
If there’s no hash on the URL, all the panels are hidden (and thus broken).
If you scroll to the bottom of the example, you’ll find a “top” link; clicking that will break our tabbing system.
I’ve purposely made the page long, so that when you click on a tab, you’ll see the page scrolls to the top of the tab. Not a huge deal, but a bit annoying.
From our criteria at the start of this post, we’ve already solved items 4 and 5. Not a terrible start. Let’s solve items 1 through 3 next.
Using the URL to initialise correctly and protect from breakage
Instead of arbitrarily picking the first panel from our collection, the code should read the current location.hash and use that if it’s available.
The problem is: what if the hash on the URL isn’t actually for a tab?
The solution here is that we need to cache a list of known panel IDs. In fact, well-written DOM scripting won’t continuously search the DOM for nodes. That is, when the show function kept calling $('.tab').each(...) it was wasteful. The result of $('.tab') should be cached.
So now the code will collect all the tabs, then find the related panels from those tabs, and we’ll use that list to double the values we give the show function (during initialisation, for instance).
// collect all the tabs
var tabs = $('.tab');
// get an array of the panel ids (from the anchor hash)
var targets = tabs.map(function () {
return this.hash;
}).get();
// use those ids to get a jQuery collection of panels
var panels = $(targets.join(','));
function show(id) {
// if no value was given, let's take the first panel
if (!id) {
id = targets[0];
}
// remove the selected class from the tabs,
// and add it back to the one the user selected
tabs.removeClass('selected').filter(function () {
return (this.hash === id);
}).addClass('selected');
// now hide all the panels, then filter to
// the one we're interested in, and show it
panels.hide().filter(id).show();
}
$(window).on('hashchange', function () {
var hash = location.hash;
if (targets.indexOf(hash) !== -1) {
show(hash);
}
});
// initialise
show(targets.indexOf(location.hash) !== -1 ? location.hash : '');
The core of working out which tab to initialise with is solved in that last line: is there a location.hash? Is it in our list of valid targets (panels)? If so, select that tab.
The second breakage we saw in the original demo was that clicking the “top” link would break our tabs. This was due to the hashchange event firing and the code didn’t validate the hash that was passed. Now this happens, the panels don’t break.
So far we’ve got a tabbing system that:
Works without JavaScript.
Supports right-click and Shift-click (and doesn’t select in these cases).
Loads the correct panel if you start with a hash.
Supports native browser navigation.
Supports the keyboard.
The only annoying problem we have now is that the page jumps when a tab is selected. That’s due to the browser following the default behaviour of an internal link on the page. To solve this, things are going to get a little hairy, but it’s all for a good cause.
Removing the jump to tab
You’d be forgiven for thinking you just need to hook a click handler and return false. It’s what I started with. Only that’s not the solution. If we add the click handler, it breaks all the right-click and Shift-click support.
There may be another way to solve this, but what follows is the way I found – and it works. It’s just a bit… hairy, as I said.
We’re going to strip the id attribute off the target panel when the user tries to navigate to it, and then put it back on once the show code starts to run. This change will mean the browser has nowhere to navigate to for that moment, and won’t jump the page.
The change involves the following:
Add a click handle that removes the id from the target panel, and cache this in a target variable that we’ll use later in hashchange (see point 4).
In the same click handler, set the location.hash to the current link’s hash. This is important because it forces a hashchange event regardless of whether the URL actually changed, which prevents the tabs breaking (try it yourself by removing this line).
For each panel, put a backup copy of the id attribute in a data property (I’ve called it old-id).
When the hashchange event fires, if we have a target value, let’s put the id back on the panel.
These changes result in this final code:
/*global $*/
// a temp value to cache *what* we're about to show
var target = null;
// collect all the tabs
var tabs = $('.tab').on('click', function () {
target = $(this.hash).removeAttr('id');
// if the URL isn't going to change, then hashchange
// event doesn't fire, so we trigger the update manually
if (location.hash === this.hash) {
// but this has to happen after the DOM update has
// completed, so we wrap it in a setTimeout 0
setTimeout(update, 0);
}
});
// get an array of the panel ids (from the anchor hash)
var targets = tabs.map(function () {
return this.hash;
}).get();
// use those ids to get a jQuery collection of panels
var panels = $(targets.join(',')).each(function () {
// keep a copy of what the original el.id was
$(this).data('old-id', this.id);
});
function update() {
if (target) {
target.attr('id', target.data('old-id'));
target = null;
}
var hash = window.location.hash;
if (targets.indexOf(hash) !== -1) {
show(hash);
}
}
function show(id) {
// if no value was given, let's take the first panel
if (!id) {
id = targets[0];
}
// remove the selected class from the tabs,
// and add it back to the one the user selected
tabs.removeClass('selected').filter(function () {
return (this.hash === id);
}).addClass('selected');
// now hide all the panels, then filter to
// the one we're interested in, and show it
panels.hide().filter(id).show();
}
$(window).on('hashchange', update);
// initialise
if (targets.indexOf(window.location.hash) !== -1) {
update();
} else {
show();
}
This version now meets all the criteria I mentioned in my original list, except for the ARIA roles and accessibility. Getting this support is actually very cheap to add.
ARIA roles
This article on ARIA tabs made it very easy to get the tabbing system working as I wanted.
The tasks were simple:
Add aria-role set to tab for the tabs, and tabpanel for the panels.
Set aria-controls on the tabs to point to their related panel (by id).
I use JavaScript to add tabindex=0 to all the tab elements.
When I add the selected class to the tab, I also set aria-selected to true and, inversely, when I remove the selected class I set aria-selected to false.
When I hide the panels I add aria-hidden=true, and when I show the specific panel I set aria-hidden=false.
And that’s it. Very small changes to get full sign-off that the tabbing system is bulletproof and accessible.
Check out the final version (and the non-jQuery version as promised).
In conclusion
There’s a lot of tab implementations out there, but there’s an equal amount that break the browsing paradigm and the simple linkability of content. Clearly there’s a special hell for those tab systems that don’t even use links, but I think it’s clear that even in something that’s relatively simple, it’s the small details that make or break the user experience.
Obviously there are corners I’ve not explored, like when there’s more than one set of tabs on a page, and equally whether you should deliver the initial markup with the correct tab selected. I think the answer lies in using query strings in combination with hashes on the URL, but maybe that’s for another year! |
2015 |
Remy Sharp |
remysharp |
2015-12-22T00:00:00+00:00 |
https://24ways.org/2015/how-tabs-should-work/ |
code |
| 147 |
Christmas Is In The AIR |
That’s right, Christmas is coming up fast and there’s plenty of things to do. Get the tree and lights up, get the turkey, buy presents and who know what else. And what about Santa? He’s got a list. I’m pretty sure he’s checking it twice.
Sure, we could use an existing list making web site or even a desktop widget. But we’re geeks! What’s the fun in that? Let’s build our own to-do list application and do it with Adobe AIR!
What’s Adobe AIR?
Adobe AIR, formerly codenamed Apollo, is a runtime environment that runs on both Windows and OSX (with Linux support to follow). This runtime environment lets you build desktop applications using Adobe technologies like Flash and Flex. Oh, and HTML. That’s right, you web standards lovin’ maniac. You can build desktop applications that can run cross-platform using the trio of technologies, HTML, CSS and JavaScript.
If you’ve tried developing with AIR before, you’ll need to get re-familiarized with the latest beta release as many things have changed since the last one (such as the API and restrictions within the sandbox.)
To get started
To get started in building an AIR application, you’ll need two basic things:
The AIR runtime. The runtime is needed to run any AIR-based application.
The SDK. The software development kit gives you all the pieces to test your application. Unzip the SDK into any folder you wish.
You’ll also want to get your hands on the JavaScript API documentation which you’ll no doubt find yourself getting into before too long. (You can download it, too.)
Also of interest, some development environments have support for AIR built right in. Aptana doesn’t have support for beta 3 yet but I suspect it’ll be available shortly.
Within the SDK, there are two main tools that we’ll use: one to test the application (ADL) and another to build a distributable package of our application (ADT). I’ll get into this some more when we get to that stage of development.
Building our To-do list application
The first step to building an application within AIR is to create an XML file that defines our default application settings. I call mine application.xml, mostly because Aptana does that by default when creating a new AIR project. It makes sense though and I’ve stuck with it. Included in the templates folder of the SDK is an example XML file that you can use.
The first key part to this after specifying things like the application ID, version, and filename, is to specify what the default content should be within the content tags. Enter in the name of the HTML file you wish to load. Within this HTML file will be our application.
<content>ui.html</content>
Create a new HTML document and name it ui.html and place it in the same directory as the application.xml file. The first thing you’ll want to do is copy over the AIRAliases.js file from the frameworks folder of the SDK and add a link to it within your HTML document.
<script type="text/javascript" src="AIRAliases.js"></script>
The aliases create shorthand links to all of the Flash-based APIs.
Now is probably a good time to explain how to debug your application.
Debugging our application
So, with our XML file created and HTML file started, let’s try testing our ‘application’. We’ll need the ADL application located in BIN folder of the SDK and tell it to run the application.xml file.
/path/to/adl /path/to/application.xml
You can also just drag the XML file onto ADL and it’ll accomplish the same thing. If you just did that and noticed that your blank application didn’t load, you’d be correct. It’s running but isn’t visible. Which at this point means you’ll have to shut down the ADL process. Sorry about that!
Changing the visibility
You have two ways to make your application visible. You can do it automatically by setting the placing true in the visible tag within the application.xml file.
<visible>true</visible>
The other way is to do it programmatically from within your application. You’d want to do it this way if you had other startup tasks to perform before showing the interface. To turn the UI on programmatically, simple set the visible property of nativeWindow to true.
<script type="text/javascript">
nativeWindow.visible = true;
</script>
Sandbox Security
Now that we have an application that we can see when we start it, it’s time to build the to-do list application. In doing so, you’d probably think that using a JavaScript library is a really good idea — and it can be but there are some limitations within AIR that have to be considered.
An HTML document, by default, runs within the application sandbox. You have full access to the AIR APIs but once the onload event of the window has fired, you’ll have a limited ability to make use of eval and other dynamic script injection approaches. This limits the ability of external sources from gaining access to everything the AIR API offers, such as database and local file system access. You’ll still be able to make use of eval for evaluating JSON responses, which is probably the most important if you wish to consume JSON-based services.
If you wish to create a greater wall of security between AIR and your HTML document loading in external resources, you can create a child sandbox. We won’t need to worry about it for our application so I won’t go any further into it but definitely keep this in mind.
Finally, our application
Getting tired of all this preamble? Let’s actually build our to-do list application. I’ll use jQuery because it’s small and should suit our needs nicely. Let’s begin with some structure:
<body>
<input type="text" id="text" value="">
<input type="button" id="add" value="Add">
<ul id="list"></ul>
</body>
Now we need to wire up that button to actually add a new item to our to-do list.
<script type="text/javascript">
$(document).ready(function(){
// make sure the application is visible
nativeWindow.visible = true;
$('#add').click(function(){
var t = $('#text').val();
if(t)
{
// use DOM methods to create the new list item
var li = document.createElement('li');
// the extra space at the end creates a buffer between the text
// and the delete link we're about to add
li.appendChild(document.createTextNode(t + ' '));
// create the delete link
var del = document.createElement('a');
// this makes it a true link. I feel dirty doing this.
del.setAttribute('href', '#');
del.addEventListener('click', function(evt){
this.parentNode.parentNode.removeChild(this.parentNode);
});
del.appendChild(document.createTextNode('[del]'));
li.appendChild(del);
// append everything to the list
$('#list').append(li);
//reset the text box
$('#text').val('');
}
})
});
</script>
And just like that, we’ve got a to-do list! That’s it! Just never close your application and you’ll remember everything. Okay, that’s not very practical. You need to have some way of storing your to-do items until the next time you open up the application.
Storing Data
You’ve essentially got 4 different ways that you can store data:
Using the local database. AIR comes with SQLLite built in. That means you can create tables and insert, update and select data from that database just like on a web server.
Using the file system. You can also create files on the local machine. You have access to a few folders on the local system such as the documents folder and the desktop.
Using EcryptedLocalStore. I like using the EcryptedLocalStore because it allows you to easily save key/value pairs and have that information encrypted. All this within just a couple lines of code.
Sending the data to a remote API. Our to-do list could sync up with Remember the Milk, for example.
To demonstrate some persistence, we’ll use the file system to store our files. In addition, we’ll let the user specify where the file should be saved. This way, we can create multiple to-do lists, keeping them separate and organized.
The application is now broken down into 4 basic tasks:
Load data from the file system.
Perform any interface bindings.
Manage creating and deleting items from the list.
Save any changes to the list back to the file system.
Loading in data from the file system
When the application starts up, we’ll prompt the user to select a file or specify a new to-do list. Within AIR, there are 3 main file objects: File, FileMode, and FileStream. File handles file and path names, FileMode is used as a parameter for the FileStream to specify whether the file should be read-only or for write access. The FileStream object handles all the read/write activity.
The File object has a number of shortcuts to default paths like the documents folder, the desktop, or even the application store. In this case, we’ll specify the documents folder as the default location and then use the browseForSave method to prompt the user to specify a new or existing file. If the user specifies an existing file, they’ll be asked whether they want to overwrite it.
var store = air.File.documentsDirectory;
var fileStream = new air.FileStream();
store.browseForSave("Choose To-do List");
Then we add an event listener for when the user has selected a file. When the file is selected, we check to see if the file exists and if it does, read in the contents, splitting the file on new lines and creating our list items within the interface.
store.addEventListener(air.Event.SELECT, fileSelected);
function fileSelected()
{
air.trace(store.nativePath);
// load in any stored data
var byteData = new air.ByteArray();
if(store.exists)
{
fileStream.open(store, air.FileMode.READ);
fileStream.readBytes(byteData, 0, store.size);
fileStream.close();
if(byteData.length > 0)
{
var s = byteData.readUTFBytes(byteData.length);
oldlist = s.split(“\r\n”);
// create todolist items
for(var i=0; i < oldlist.length; i++)
{
createItem(oldlist[i], (new Date()).getTime() + i );
}
}
}
}
Perform Interface Bindings
This is similar to before where we set the click event on the Add button but we’ve moved the code to save the list into a separate function.
$('#add').click(function(){
var t = $('#text').val();
if(t){
// create an ID using the time
createItem(t, (new Date()).getTime() );
}
})
Manage creating and deleting items from the list
The list management is now in its own function, similar to before but with some extra information to identify list items and with calls to save our list after each change.
function createItem(t, id)
{
if(t.length == 0) return;
// add it to the todo list
todolist[id] = t;
// use DOM methods to create the new list item
var li = document.createElement('li');
// the extra space at the end creates a buffer between the text
// and the delete link we're about to add
li.appendChild(document.createTextNode(t + ' '));
// create the delete link
var del = document.createElement('a');
// this makes it a true link. I feel dirty doing this.
del.setAttribute('href', '#');
del.addEventListener('click', function(evt){
var id = this.id.substr(1);
delete todolist[id]; // remove the item from the list
this.parentNode.parentNode.removeChild(this.parentNode);
saveList();
});
del.appendChild(document.createTextNode('[del]'));
del.id = 'd' + id;
li.appendChild(del);
// append everything to the list
$('#list').append(li);
//reset the text box
$('#text').val('');
saveList();
}
Save changes to the file system
Any time a change is made to the list, we update the file. The file will always reflect the current state of the list and we’ll never have to click a save button. It just iterates through the list, adding a new line to each one.
function saveList(){
if(store.isDirectory) return;
var packet = '';
for(var i in todolist)
{
packet += todolist[i] + '\r\n';
}
var bytes = new air.ByteArray();
bytes.writeUTFBytes(packet);
fileStream.open(store, air.FileMode.WRITE);
fileStream.writeBytes(bytes, 0, bytes.length);
fileStream.close();
}
One important thing to mention here is that we check if the store is a directory first. The reason we do this goes back to our browseForSave call. If the user cancels the dialog without selecting a file first, then the store points to the documentsDirectory that we set it to initially. Since we haven’t specified a file, there’s no place to save the list.
Hopefully by this point, you’ve been thinking of some cool ways to pimp out your list. Now we need to package this up so that we can let other people use it, too.
Creating a Package
Now that we’ve created our application, we need to package it up so that we can distribute it. This is a two step process. The first step is to create a code signing certificate (or you can pay for one from Thawte which will help authenticate you as an AIR application developer).
To create a self-signed certificate, run the following command. This will create a PFX file that you’ll use to sign your application.
adt -certificate -cn todo24ways 1024-RSA todo24ways.pfx mypassword
After you’ve done that, you’ll need to create the package with the certificate
adt -package -storetype pkcs12 -keystore todo24ways.pfx todo24ways.air application.xml .
The important part to mention here is the period at the end of the command. We’re telling it to package up all files in the current directory.
After that, just run the AIR file, which will install your application and run it.
Important things to remember about AIR
When developing an HTML application, the rendering engine is Webkit. You’ll thank your lucky stars that you aren’t struggling with cross-browser issues. (My personal favourites are multiple backgrounds and border radius!)
Be mindful of memory leaks. Things like Ajax calls and event binding can cause applications to slowly leak memory over time. Web pages are normally short lived but desktop applications are often open for hours, if not days, and you may find your little desktop application taking up more memory than anything else on your machine!
The WebKit runtime itself can also be a memory hog, usually taking about 15MB just for itself. If you create multiple HTML windows, it’ll add another 15MB to your memory footprint. Our little to-do list application shouldn’t be much of a concern, though.
The other important thing to remember is that you’re still essentially running within a Flash environment. While you probably won’t notice this working in small applications, the moment you need to move to multiple windows or need to accomplish stuff beyond what HTML and JavaScript can give you, the need to understand some of the Flash-based elements will become more important.
Lastly, the other thing to remember is that HTML links will load within the AIR application. If you want a link to open in the users web browser, you’ll need to capture that event and handle it on your own. The following code takes the HREF from a clicked link and opens it in the default web browser.
air.navigateToURL(new air.URLRequest(this.href));
Only the beginning
Of course, this is only the beginning of what you can do with Adobe AIR. You don’t have the same level of control as building a native desktop application, such as being able to launch other applications, but you do have more control than what you could have within a web application. Check out the Adobe AIR Developer Center for HTML and Ajax for tutorials and other resources.
Now, go forth and create your desktop applications and hopefully you finish all your shopping before Christmas!
Download the example files. |
2007 |
Jonathan Snook |
jonathansnook |
2007-12-19T00:00:00+00:00 |
https://24ways.org/2007/christmas-is-in-the-air/ |
code |
| 215 |
Teach the CLI to Talk Back |
The CLI is a daunting tool. It’s quick, powerful, but it’s also incredibly easy to screw things up in – either with a mistyped command, or a correctly typed command used at the wrong moment. This puts a lot of people off using it, but it doesn’t have to be this way.
If you’ve ever interacted with Slack’s Slackbot to set a reminder or ask a question, you’re basically using a command line interface, but it feels more like having a conversation. (My favourite Slack app is Lunch Train which helps with the thankless task of herding colleagues to a particular lunch venue on time.)
Same goes with voice-operated assistants like Alexa, Siri and Google Home. There are even games, like Lifeline, where you interact with a stranded astronaut via pseudo SMS, and KOMRAD where you chat with a Soviet AI.
I’m not aiming to build an AI here – my aspirations are a little more down to earth. What I’d like is to make the CLI a friendlier, more forgiving, and more intuitive tool for new or reluctant users. I want to teach it to talk back.
Interactive command lines in the wild
If you’ve used dev tools in the command line, you’ve probably already used an interactive prompt – something that asks you questions and responds based on your answers. Here are some examples:
Yeoman
If you have Yeoman globally installed, running yo will start a command prompt.
The prompt asks you what you’d like to do, and gives you options with how to proceed. Seasoned users will run specific commands for these options rather than go through this prompt, but it’s a nice way to start someone off with using the tool.
npm
If you’re a Node.js developer, you’re probably familiar with typing npm init to initialise a project. This brings up prompts that will populate a package.json manifest file for that project.
The alternative would be to expect the user to craft their own package.json, which is more error-prone since it’s in JSON format, so something as trivial as an extraneous comma can throw an error.
Snyk
Snyk is a dev tool that checks for known vulnerabilities in your dependencies. Running snyk wizard in the CLI brings up a list of all the known vulnerabilities, and gives you options on how to deal with it – such as patching the issue, applying a fix by upgrading the problematic dependency, or ignoring the issue (you are then prompted for a reason).
These decisions get mapped to the manifest and a .snyk file, and committed into the repo so that the settings are the same for everyone who uses that project.
I work at Snyk, and running the wizard is what made me think about building my own personal assistant in the command line to help me with some boring, repetitive tasks.
Writing your own
Something I do a lot is add bookmarks to styleguides.io – I pull down the entire repo, copy and paste a template YAML file, and edit to contents. Sometimes I get it wrong and break the site. So I’ve been putting together a tool to help me add bookmarks.
It’s called bookmarkbot – it’s a personal assistant squirrel called Mark who will collect and bury your bookmarks for safekeeping.*
*Fortunately, this metaphor also gives me a charming excuse for any situation where bookmarks sometimes get lost – it’s not my poorly-written code, honest, it’s just being realistic because sometimes squirrels forget where they buried things!
When you run bookmarkbot, it will ask you for some information, and save that information as a Markdown file in YAML format.
For this demo, I’m going to use a Node.js package called inquirer, which is a well supported tool for creating command line prompts. I like it because it has a bunch of different question types; from input, which asks for some text back, confirm which expects a yes/no response, or a list which gives you a set of options to choose from. You can even nest questions, Choose Your Own Adventure style.
Prerequisites
Node.js
npm
RubyGems (Only if you want to go as far as serving a static site for your bookmarks, and you want to use Jekyll for it)
Disclaimer
Bear in mind that this is a really simplified walkthrough. It doesn’t have any error states, and it doesn’t handle the situation where we save a file with the same name. But it gets you in a good place to start building out your tool.
Let’s go!
Create a new folder wherever you keep your projects, and give it an awesome name (I’ve called mine bookmarks and put it in the Sites directory because I’m unimaginative). Now cd to that directory.
cd Sites/bookmarks
Let’s use that example I gave earlier, the trusty npm init.
npm init
Pop in the information you’d like to provide, or hit ENTER to skip through and save the defaults. Your directory should now have a package.json file in it. Now let’s install some of the dependencies we’ll need.
npm install --save inquirer
npm install --save slugify
Next, add the following snippet to your package.json to tell it to run this file when you run npm start.
"scripts": {
…
"start": "node index.js"
}
That index.js file doesn’t exist yet, so let’s create it in the root of our folder, and add the following:
// Packages we need
var fs = require('fs'); // Creates our file (part of Node.js so doesn't need installing)
var inquirer = require('inquirer'); // The engine for our questions prompt
var slugify = require('slugify'); // Will turn a string into a usable filename
// The questions
var questions = [
{
type: 'input',
name: 'name',
message: 'What is your name?',
},
];
// The questions prompt
function askQuestions() {
// Ask questions
inquirer.prompt(questions).then(answers => {
// Things we'll need to generate the output
var name = answers.name;
// Finished asking questions, show the output
console.log('Hello ' + name + '!');
});
}
// Kick off the questions prompt
askQuestions();
This is just some barebones where we’re including the inquirer package we installed earlier. I’ve stored the questions in a variable, and the askQuestions function will prompt the user for their name, and then print “Hello <your name>” in the console.
Enough setup, let’s see some magic. Save the file, go back to the command line and run npm start.
Extending what we’ve learnt
At the moment, we’re just saving a name to a file, which isn’t really achieving our goal of saving bookmarks. We don’t want our tool to forget our information every time we talk to it – we need to save it somewhere. So I’m going to add a little function to write the output to a file.
Saving to a file
Create a folder in your project’s directory called _bookmarks. This is where the bookmarks will be saved.
I’ve replaced my questions array, and instead of asking for a name, I’ve extended out the questions, asking to be provided with a link and title (as a regular input type), a list of tags (using inquirer’s checkbox type), and finally a description, again, using the input type.
So this is how my code looks now:
// Packages we need
var fs = require('fs'); // Creates our file
var inquirer = require('inquirer'); // The engine for our questions prompt
var slugify = require('slugify'); // Will turn a string into a usable filename
// The questions
var questions = [
{
type: 'input',
name: 'link',
message: 'What is the url?',
},
{
type: 'input',
name: 'title',
message: 'What is the title?',
},
{
type: 'checkbox',
name: 'tags',
message: 'Would you like me to add any tags?',
choices: [
{ name: 'frontend' },
{ name: 'backend' },
{ name: 'security' },
{ name: 'design' },
{ name: 'process' },
{ name: 'business' },
],
},
{
type: 'input',
name: 'description',
message: 'How about a description?',
},
];
// The questions prompt
function askQuestions() {
// Say hello
console.log('🐿 Oh, hello! Found something you want me to bookmark?\n');
// Ask questions
inquirer.prompt(questions).then((answers) => {
// Things we'll need to generate the output
var title = answers.title;
var link = answers.link;
var tags = answers.tags + '';
var description = answers.description;
var output = '---\n' +
'title: "' + title + '"\n' +
'link: "' + link + '"\n' +
'tags: [' + tags + ']\n' +
'---\n' + description + '\n';
// Finished asking questions, show the output
console.log('\n🐿 All done! Here is what I\'ve written down:\n');
console.log(output);
// Things we'll need to generate the filename
var slug = slugify(title);
var filename = '_bookmarks/' + slug + '.md';
// Write the file
fs.writeFile(filename, output, function () {
console.log('\n🐿 Great! I have saved your bookmark to ' + filename);
});
});
}
// Kick off the questions prompt
askQuestions();
The output is formatted into YAML metadata as a Markdown file, which will allow us to turn it into a static HTML file using a build tool later. Run npm start again and have a look at the file it outputs.
Getting confirmation
Before the user makes critical changes, it’s good to verify those changes first. We’re going to add a confirmation step to our tool, before writing the file. More seasoned CLI users may favour speed over a “hey, can you wait a sec and just check this is all ok” step, but I always think it’s worth adding one so you can occasionally save someone’s butt.
So, underneath our questions array, let’s add a confirmation array.
// Packages we need
…
// The questions
…
// Confirmation questions
var confirm = [
{
type: 'confirm',
name: 'confirm',
message: 'Does this look good?',
},
];
// The questions prompt
…
As we’re adding the confirm step before the file gets written, we’ll need to add the following inside the askQuestions function:
// The questions prompt
function askQuestions() {
// Say hello
…
// Ask questions
inquirer.prompt(questions).then((answers) => {
…
// Things we'll need to generate the output
…
// Finished asking questions, show the output
…
// Confirm output is correct
inquirer.prompt(confirm).then(answers => {
// Things we'll need to generate the filename
var slug = slugify(title);
var filename = '_bookmarks/' + slug + '.md';
if (answers.confirm) {
// Save output into file
fs.writeFile(filename, output, function () {
console.log('\n🐿 Great! I have saved your bookmark to ' +
filename);
});
} else {
// Ask the questions again
console.log('\n🐿 Oops, let\'s try again!\n');
askQuestions();
}
});
});
}
// Kick off the questions prompt
askQuestions();
Now run npm start and give it a go!
Typing y will write the file, and n will take you back to the start. Ideally, I’d store the answers already given as defaults so the user doesn’t have to start from scratch, but I want to keep this demo simple.
Serving the files
Now that your bookmarking tool is successfully saving formatted Markdown files to a folder, the next step is to serve those files in a way that lets you share them online. The easiest way to do this is to use a static-site generator to convert your YAML files into HTML, and pop them all on one page. Now, you’ve got a few options here and I don’t want to force you down any particular path, as there are plenty out there – it’s just a case of using the one you’re most comfortable with.
I personally favour Jekyll because of its tight integration with GitHub Pages – I don’t want to mess around with hosting and deployment, so it’s really handy to have my bookmarks publish themselves on my site as soon as I commit and push them using Git.
I’ll give you a very brief run-through of how I’m doing this with bookmarkbot, but I recommend you read my Get Started With GitHub Pages (Plus Bonus Jekyll) guide if you’re unfamiliar with them, because I’ll be glossing over some bits that are already covered in there.
Setting up a build tool
If you haven’t already, install Jekyll and Bundler globally through RubyGems. Jekyll is our static-site generator, and Bundler is what we use to install Ruby dependencies.
gem install jekyll bundler
In my project folder, I’m going to run the following which will install the Jekyll files we’ll need to build our listing page. I’m using --force, otherwise it will complain that the directory isn’t empty.
jekyll new . --force
If you check your project folder, you’ll see a bunch of new files. Now run the following to start the server:
bundle exec jekyll serve
This will build a new directory called _site. This is where your static HTML files have been generated. Don’t touch anything in this folder because it will get overwritten the next time you build.
Now that serve is running, go to http://127.0.0.1:4000/ and you’ll see the default Jekyll page and know that things are set up right. Now, instead, we want to see our list of bookmarks that are saved in the _bookmarks directory (make sure you’ve got a few saved). So let’s get that set up next.
Open up the _config.yml file that Jekyll added earlier. In here, we’re going to tell it about our bookmarks. Replace everything in your _config.yml file with the following:
title: My Bookmarks
description: These are some of my favourite articles about the web.
markdown: kramdown
baseurl: /bookmarks # This needs to be the same name as whatever you call your repo on GitHub.
collections:
- bookmarks
This will make Jekyll aware of our _bookmarks folder so that we can call it later. Next, create a new directory and file at _layouts/home.html and paste in the following.
<!doctype html>
<html lang="en">
<head>
<meta charset="UTF-8" />
<title>{{site.title}}</title>
<meta name="description" content="{{site.description}}">
</head>
<body>
<h1>{{site.title}}</h1>
<p>{{site.description}}</p>
<ul>
{% for bookmark in site.bookmarks %}
<li>
<a href="{{bookmark.link}}">
<h2>{{bookmark.title}}</h2>
</a>
{{bookmark.content}}
{% if bookmark.tags %}
<ul>
{% for tags in bookmark.tags %}<li>{{tags}}</li>{% endfor %}
</ul>
{% endif %}
</li>
{% endfor %}
</ul>
</body>
</html>
Restart Jekyll for your config changes to kick in, and go to the url it provides you (probably http://127.0.0.1:4000/bookmarks, unless you gave something different as your baseurl).
It’s a decent start – there’s a lot more we can do in this area but now we’ve got a nice list of all our bookmarks, let’s get it online!
If you want to use GitHub Pages to host your files, your first step is to push your project to GitHub. Go to your repository and click “settings”. Scroll down to the section labelled “GitHub Pages”, and from here you can enable it. Select your master branch, and it will provide you with a url to view your published pages.
What next?
Now that you’ve got a framework in place for publishing bookmarks, you can really go to town on your listing page and make it your own. First thing you’ll probably want to do is add some CSS, then when you’ve added a bunch of bookmarks, you’ll probably want to have some filtering in place for the tags, perhaps extend the types of questions that you ask to include an image (if you’re feeling extra-fancy, you could just ask for a url and pull in metadata from the site itself). Maybe you’ve got an idea that doesn’t involve bookmarks at all.
You could use what you’ve learnt to build a place where you can share quotes, a list of your favourite restaurants, or even Christmas gift ideas.
Here’s one I made earlier
My demo, bookmarkbot, is on GitHub, and I’ve reused a lot of the code from styleguides.io. Feel free to grab bits of code from there, and do share what you end up making! |
2017 |
Anna Debenham |
annadebenham |
2017-12-11T00:00:00+00:00 |
https://24ways.org/2017/teach-the-cli-to-talk-back/ |
code |
| 126 |
Intricate Fluid Layouts in Three Easy Steps |
The Year of the Script may have drawn attention away from CSS but building fluid, multi-column, cross-browser CSS layouts can still be as unpleasant as a lump of coal. Read on for a worry-free approach in three quick steps.
The layout system I developed, YUI Grids CSS, has three components. They can be used together as we’ll see, or independently.
The Three Easy Steps
Choose fluid or fixed layout, and choose the width (in percents or pixels) of the page.
Choose the size, orientation, and source-order of the main and secondary blocks of content.
Choose the number of columns and how they distribute (for example 50%-50% or 25%-75%), using stackable and nestable grid structures.
The Setup
There are two prerequisites: We need to normalize the size of an em and opt into the browser rendering engine’s Strict Mode.
Ems are a superior unit of measure for our case because they represent the current font size and grow as the user increases their font size setting. This flexibility—the container growing with the user’s wishes—means larger text doesn’t get crammed into an unresponsive container. We’ll use YUI Fonts CSS to set the base size because it provides consistent-yet-adaptive font-sizes while preserving user control.
The second prerequisite is to opt into Strict Mode (more info on rendering modes) by declaring a Doctype complete with URI. You can choose XHTML or HTML, and Transitional or Strict. I prefer HTML 4.01 Strict, which looks like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
Including the CSS
A single small CSS file powers a nearly-infinite number of layouts thanks to a recursive system and the interplay between the three distinct components. You could prune to a particular layout’s specific needs, but why bother when the complete file weighs scarcely 1.8kb uncompressed? Compressed, YUI Fonts and YUI Grids combine for a miniscule 0.9kb over the wire.
You could save an HTTP request by concatenating the two CSS files, or by adding their contents to your own CSS, but I’ll keep them separate for now:
<link href="fonts.css" rel="stylesheet" type="text/css">
<link href="grids.css" rel="stylesheet" type="text/css">
Example: The Setup
Now we’re ready to build some layouts.
Step 1: Choose Fluid or Fixed Layout
Choose between preset widths of 750px, 950px, and 100% by giving a document-wrapping div an ID of doc, doc2, or doc3. These options cover most use cases, but it’s easy to define a custom fixed width.
The fluid 100% grid (doc3) is what I’ve been using almost exclusively since it was introduced in the last YUI released.
<body>
<div id="doc3"></div>
</body>
All pages are centered within the viewport, and grow with font size. The 100% width page (doc3) preserves 10px of breathing room via left and right margins. If you prefer your content flush to the viewport, just add doc3 {margin:auto} to your CSS.
Regardless of what you choose in the other two steps, you can always toggle between these widths and behaviors by simply swapping the ID value. It’s really that simple.
Example: 100% fluid layout
Step 2: Choose a Template Preset
This is perhaps the most frequently omitted step (they’re all optional), but I use it nearly every time. In a source-order-independent way (good for accessibility and SEO), “Template Presets” provide commonly used template widths compatible with ad-unit dimension standards defined by the Interactive Advertising Bureau, an industry association.
Choose between the six Template Presets (.yui-t1 through .yui-t6) by setting the class value on the document-wrapping div established in Step 1. Most frequently I use yui-t3, which puts the narrow secondary block on the left and makes it 300px wide.
<body>
<div id="doc3" class="yui-t3"></div>
</body>
The Template Presets control two “blocks” of content, which are defined by two divs, each with yui-b (“b” for “block”) class values. Template Presets describe the width and orientation of the secondary block; the main block will take up the rest of the space.
<body>
<div id="doc3" class="yui-t3">
<div class="yui-b"></div>
<div class="yui-b"></div>
</div>
</body>
Use a wrapping div with an ID of yui-main to structurally indicate which block is the main block. This wrapper—not the source order—identifies the main block.
<body>
<div id="doc3" class="yui-t3">
<div id="yui-main">
<div class="yui-b"></div>
</div>
<div class="yui-b"></div>
</div>
</body>
Example: Main and secondary blocks sized and oriented with .yui-t3 Template Preset
Again, regardless of what values you choose in the other steps, you can always toggle between these Template Presets by toggling the class value of your document-wrapping div. It’s really that simple.
Step 3: Nest and Stack Grid Structures.
The bulk of the power of the system is in this third step. The key is that columns are built by parents telling children how to behave. By default, two children each consume half of their parent’s area. Put two units inside a grid structure, and they will sit side-by-side, and they will each take up half the space. Nest this structure and two columns become four. Stack them for rows of columns.
An Even Number of Columns
The default behavior creates two evenly-distributed columns. It’s easy. Define one parent grid with .yui-g (“g” for grid) and two child units with .yui-u (“u” for unit). The code looks like this:
<div class="yui-g">
<div class="yui-u first"></div>
<div class="yui-u"></div>
</div>
Be sure to indicate the “first“ unit because the :first-child pseudo-class selector isn’t supported across all A-grade browsers. It’s unfortunate we need to add this, but luckily it’s not out of place in the markup layer since it is structural information.
Example: Two evenly-distributed columns in the main content block
An Odd Number of Columns
The default system does not work for an odd number of columns without using the included “Special Grids” classes. To create three evenly distributed columns, use the “yui-gb“ Special Grid:
<div class="yui-gb">
<div class="yui-u first"></div>
<div class="yui-u"></div>
<div class="yui-u"></div>
</div>
Example: Three evenly distributed columns in the main content block
Uneven Column Distribution
Special Grids are also used for unevenly distributed column widths. For example, .yui-ge tells the first unit (column) to take up 75% of the parent’s space and the other unit to take just 25%.
<div class="yui-ge">
<div class="yui-u first"></div>
<div class="yui-u"></div>
</div>
Example: Two columns in the main content block split 75%-25%
Putting It All Together
Start with a full-width fluid page (div#doc3). Make the secondary block 180px wide on the right (div.yui-t4). Create three rows of columns: Three evenly distributed columns in the first row (div.yui-gb), two uneven columns (66%-33%) in the second row (div.yui-gc), and two evenly distributed columns in the thrid row.
<body>
<!-- choose fluid page and Template Preset -->
<div id="doc3" class="yui-t4">
<!-- main content block -->
<div id="yui-main">
<div class="yui-b">
<!-- stacked grid structure, Special Grid "b" -->
<div class="yui-gb">
<div class="yui-u first"></div>
<div class="yui-u"></div>
<div class="yui-u"></div>
</div>
<!-- stacked grid structure, Special Grid "c" -->
<div class="yui-gc">
<div class="yui-u first"></div>
<div class="yui-u"></div>
</div>
<!-- stacked grid structure -->
<div class="yui-g">
<div class="yui-u first"></div>
<div class="yui-u"></div>
</div>
</div>
</div>
<!-- secondary content block -->
<div class="yui-b"></div>
</div>
</body>
Example: A complex layout.
Wasn’t that easy? Now that you know the three “levers” of YUI Grids CSS, you’ll be creating headache-free fluid layouts faster than you can say “Peace on Earth”. |
2006 |
Nate Koechley |
natekoechley |
2006-12-20T00:00:00+00:00 |
https://24ways.org/2006/intricate-fluid-layouts/ |
code |
| 327 |
Improving Form Accessibility with DOM Scripting |
The form label element is an incredibly useful little element – it lets you link the form field unquestionably with the descriptive label text that sits alongside or above it. This is a very useful feature for people using screen readers, but there are some problems with this element.
What happens if you have one piece of data that, for various reasons (validation, the way your data is collected/stored etc), needs to be collected using several form elements?
The classic example is date of birth – ideally, you’ll ask for the date of birth once but you may have three inputs, one each for day, month and year, that you also need to provide hints about the format required. The problem is that to be truly accessible you need to label each field. So you end up needing something to say “this is a date of birth”, “this is the day field”, “this is the month field” and “this is the day field”. Seems like overkill, doesn’t it? And it can uglify a form no end.
There are various ways that you can approach it (and I think I’ve seen them all). Some people omit the label and rely on the title attribute to help the user through; others put text in a label but make the text 1 pixel high and merging in to the background so that screen readers can still get that information. The most common method, though, is simply to set the label to not display at all using the CSS display:none property/value pairing (a technique which, for the time being, seems to work on most screen readers). But perhaps we can do more with this?
The technique I am suggesting as another alternative is as follows (here comes the pseudo-code):
Start with a totally valid and accessible form
Ensure that each form input has a label that is linked to its related form control
Apply a class to any label that you don’t want to be visible (for example superfluous)
Then, through the magic of unobtrusive JavaScript/the DOM, manipulate the page as follows once the page has loaded:
Find all the label elements that are marked as superfluous and hide them
Find out what input element each of these label elements is related to
Then apply a hint about formatting required for input (gleaned from the original, now-hidden label text) – add it to the form input as default text
Finally, add in a behaviour that clears or selects the default text (as you choose)
So, here’s the theory put into practice – a date of birth, grouped using a fieldset, and with the behaviours added in using DOM, and here’s the JavaScript that does the heavy lifting.
But why not just use display:none? As demonstrated at Juicy Studio, display:none seems to work quite well for hiding label elements. So why use a sledge hammer to crack a nut? In all honesty, this is something of an experiment, but consider the following:
Using the DOM, you can add extra levels of help, potentially across a whole form – or even range of forms – without necessarily increasing your markup (it goes beyond simply hiding labels)
Screen readers today may identify a label that is set not to display, but they may not in the future – this might provide a way around
By expanding this technique above, it might be possible to visually change the parent container that groups these items – in this case, a fieldset and legend, which are notoriously difficult to style consistently across different browsers – while still retaining the underlying semantic/logical structure
Well, it’s an idea to think about at least. How is it for you? How else might you use DOM scripting to improve the accessiblity or usability of your forms? |
2005 |
Ian Lloyd |
ianlloyd |
2005-12-03T00:00:00+00:00 |
https://24ways.org/2005/improving-form-accessibility-with-dom-scripting/ |
code |
| 184 |
Spruce It Up |
The landscape of web typography is changing quickly these days. We’ve gone from the wild west days of sIFR to Cufón to finally seeing font embedding seeing wide spread adoption by browser developers (and soon web designers) with @font-face. For those who’ve felt limited by the typographic possibilities before, this has been a good year.
As Mark Boulton has so eloquently elucidated, @font-face embedding doesn’t come without its drawbacks. Font files can be quite large and FOUT—that nasty flash of unstyled text—can be a distraction for users.
Data URIs
We can battle FOUT by using Data URIs. A Data URI allows the font to be encoded right into the CSS file. When the font comes with the CSS, the flash of unstyled text is mitigated. No extra HTTP requests are required.
Don’t be a grinch, though. Sending hundreds of kilobytes down the pipe still isn’t great. Sometimes, all we want to do is spruce up our site with a little typographic sugar.
Be Selective
Dan Cederholm’s SimpleBits is an attractive site.
Take a look at the ampersand within the header of his site. It’s the lovely (and free) Goudy Bookletter 1911 available from The League of Movable Type. The Opentype format is a respectable 28KB. Nothing too crazy but hold on here. Mr. Cederholm is only using the ampersand! Ouch. That’s a lot of bandwidth just for one character.
Can we optimize a font like we can an image? Yes. Image optimization essentially works by removing unnecessary image data such as colour data, hidden comments or using compression algorithms. How do you remove unnecessary information from a font? Subsetting.
If you’re the adventurous type, grab a copy of FontForge, which is an open source font editing tool. You can open the font, view and edit any of the glyphs and then re-generate the font. The interface is a little clunky but you’ll be able to select any character you don’t want and then cut the glyphs. Re-generate your font and you’ve now got a smaller file.
There are certainly more optimizations that can also be made such as removing hinting and kerning information. Keep in mind that removing this information may affect how well the type renders.
At this time of year, though, I’m sure you’re quite busy. Save yourself some time and head on over to the Font Squirrel Font Generator.
The Font Generator is extremely handy and allows for a number of optimizations and cross-platform options to be generated instantly. Select the font from your local system—make sure that you are only using properly licensed fonts!
In this particular case, we only want the ampersand. Click on Subset Fonts which will open up a new menu. Unselect any preselected sets and enter the ampersand into the Single Characters text box.
Generate your font and what are you left with? 3KB.
The Font Generator even generates a base64 encoded data URI stylesheet to be imported easily into your project.
Check out the Demo page. (This demo won’t work in Internet Explorer as we’re only demonstrating the Data URI font embedding and not using the EOT file format that IE requires.)
No Unnecessary Additives
If you peeked under the hood of that demo, did you notice something interesting? There’s no <span> around the ampersand. The great thing about this is that we can take advantage of the font stack’s natural ability to switch to a fallback font when a character isn’t available.
Just like that, we’ve managed to spruce up our page with a little typographic sugar without having to put on too much weight. |
2009 |
Jonathan Snook |
jonathansnook |
2009-12-19T00:00:00+00:00 |
https://24ways.org/2009/spruce-it-up/ |
code |
| 192 |
Cleaner Code with CSS3 Selectors |
The parts of CSS3 that seem to grab the most column inches on blogs and in articles are the shiny bits. Rounded corners, text shadow and new ways to achieve CSS layouts are all exciting and bring with them all kinds of possibilities for web design. However what really gets me, as a developer, excited is a bit more mundane.
In this article I’m going to take a look at some of the ways our front and back-end code will be simplified by CSS3, by looking at the ways we achieve certain visual effects now in comparison to how we will achieve them in a glorious, CSS3-supported future. I’m also going to demonstrate how we can use these selectors now with a little help from JavaScript – which can work out very useful if you find yourself in a situation where you can’t change markup that is being output by some server-side code.
The wonder of nth-child
So why does nth-child get me so excited? Here is a really common situation, the designer would like the tables in the application to look like this:
Setting every other table row to a different colour is a common way to enhance readability of long rows. The tried and tested way to implement this is by adding a class to every other row. If you are writing the markup for your table by hand this is a bit of a nuisance, and if you stick a row in the middle you have to change the rows the class is applied to. If your markup is generated by your content management system then you need to get the server-side code to add that class – if you have access to that code.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Striping every other row - using classes</title>
<style type="text/css">
body {
padding: 40px;
margin: 0;
font: 0.9em Arial, Helvetica, sans-serif;
}
table {
border-collapse: collapse;
border: 1px solid #124412;
width: 600px;
}
th {
border: 1px solid #124412;
background-color: #334f33;
color: #fff;
padding: 0.4em;
text-align: left;
}
td {
padding: 0.4em;
}
tr.odd td {
background-color: #86B486;
}
</style>
</head>
<body>
<table>
<tr>
<th>Name</th>
<th>Cards sent</th>
<th>Cards received</th>
<th>Cards written but not sent</th>
</tr>
<tr>
<td>Ann</td>
<td>40</td>
<td>28</td>
<td>4</td>
</tr>
<tr class="odd">
<td>Joe</td>
<td>2</td>
<td>27</td>
<td>29</td>
</tr>
<tr>
<td>Paul</td>
<td>5</td>
<td>35</td>
<td>2</td>
</tr>
<tr class="odd">
<td>Louise</td>
<td>65</td>
<td>65</td>
<td>0</td>
</tr>
</table>
</body>
</html>
View Example 1
This situation is something I deal with on almost every project, and apart from being an extra thing to do, it just isn’t ideal having the server-side code squirt classes into the markup for purely presentational reasons. This is where the nth-child pseudo-class selector comes in. The server-side code creates a valid HTML table for the data, and the CSS then selects the odd rows with the following selector:
tr:nth-child(odd) td {
background-color: #86B486;
}
View Example 2
The odd and even keywords are very handy in this situation – however you can also use a multiplier here. 2n would be equivalent to the keyword ‘odd’ 3n would select every third row and so on.
Browser support
Sadly, nth-child has pretty poor browser support. It is not supported in Internet Explorer 8 and has somewhat buggy support in some other browsers. Firefox 3.5 does have support. In some situations however, you might want to consider using JavaScript to add this support to browsers that don’t have it. This can be very useful if you are dealing with a Content Management System where you have no ability to change the server-side code to add classes into the markup.
I’m going to use jQuery in these examples as it is very simple to use the same CSS selector used in the CSS to target elements with jQuery – however you could use any library or write your own function to do the same job. In the CSS I have added the original class selector to the nth-child selector:
tr:nth-child(odd) td, tr.odd td {
background-color: #86B486;
}
Then I am adding some jQuery to add a class to the markup once the document has loaded – using the very same nth-child selector that works for browsers that support it.
<script src="http://code.jquery.com/jquery-latest.js"></script>
<script>
$(document).ready(function(){
$("tr:nth-child(odd)").addClass("odd");
});
</script>
View Example 3
We could just add a background colour to the element using jQuery, however I prefer not to mix that information into the JavaScript as if we change the colour on our table rows I would need to remember to change it both in the CSS and in the JavaScript.
Doing something different with the last element
So here’s another thing that we often deal with. You have a list of items all floated left with a right hand margin on each element constrained within a fixed width layout. If each element has the right margin applied the margin on the final element will cause the set to become too wide forcing that last item down to the next row as shown in the below example where I have used a grey border to indicate the fixed width.
Currently we have two ways to deal with this. We can put a negative right margin on the list, the same width as the space between the elements. This means that the extra margin on the final element fills that space and the item doesn’t drop down.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>The last item is different</title>
<style type="text/css">
body {
padding: 40px;
margin: 0;
font: 0.9em Arial, Helvetica, sans-serif;
}
div#wrapper {
width: 740px;
float: left;
border: 5px solid #ccc;
}
ul.gallery {
margin: 0 -10px 0 0;
padding: 0;
list-style: none;
}
ul.gallery li {
float: left;
width: 240px;
margin: 0 10px 10px 0;
}
</style>
</head>
<body>
<div id="wrapper">
<ul class="gallery">
<li><img src="xmas1.jpg" alt="baubles" /></li>
<li><img src="xmas2.jpg" alt="star" /></li>
<li><img src="xmas3.jpg" alt="wreath" /></li>
</ul>
</div>
</body>
</html>
View Example 4
The other solution will be to put a class on the final element and in the CSS remove the margin for this class.
ul.gallery li.last {
margin-right: 0;
}
This second solution may not be easy if the content is generated from server-side code that you don’t have access to change.
It could all be so different. In CSS3 we have marvellously common-sense selectors such as last-child, meaning that we can simply add rules for the last list item.
ul.gallery li:last-child {
margin-right: 0;
}
View Example 5
This removed the margin on the li which is the last-child of the ul with a class of gallery. No messing about sticking classes on the last item, or pushing the width of the item out wit a negative margin.
If this list of items repeated ad infinitum then you could also use nth-child for this task. Creating a rule that makes every 3rd element margin-less.
ul.gallery li:nth-child(3n) {
margin-right: 0;
}
View Example 6
A similar example is where the designer has added borders to the bottom of each element – but the last item does not have a border or is in some other way different. Again, only a class added to the last element will save you here if you cannot rely on using the last-child selector.
Browser support for last-child
The situation for last-child is similar to that of nth-child, in that there is no support in Internet Explorer 8. However, once again it is very simple to replicate the functionality using jQuery. Adding our .last class to the last list item.
$("ul.gallery li:last-child").addClass("last");
We could also use the nth-child selector to add the .last class to every third list item.
$("ul.gallery li:nth-child(3n)").addClass("last");
View Example 7
Fun with forms
Styling forms can be a bit of a trial, made difficult by the fact that any CSS applied to the input element will effect text fields, submit buttons, checkboxes and radio buttons. As developers we are left adding classes to our form fields to differentiate them. In most builds all of my text fields have a simple class of text whereas I wouldn’t dream of adding a class of para to every paragraph element in a document.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Syling form fields</title>
<style type="text/css">
body {
padding: 40px;
margin: 0;
font: 0.9em Arial, Helvetica, sans-serif;
}
form div {
clear: left;
padding: 0 0 0.8em 0;
}
form label {
float: left;
width: 120px;
}
form .text, form textarea {
border:1px solid #333;
padding: 0.2em;
width: 400px;
}
form .button {
border: 1px solid #333;
background-color: #eee;
color: #000;
padding: 0.1em;
}
</style>
</head>
<body>
<h1>Send your Christmas list to Santa</h1>
<form method="post" action="" id="christmas-list">
<div><label for="fName">Name</label>
<input type="text" name="fName" id="fName" class="text" /></div>
<div><label for="fEmail">Email address</label>
<input type="text" name="fEmail" id="fEmail" class="text" /></div>
<div><label for="fList">Your list</label>
<textarea name="fList" id="fList" rows="10" cols="30"></textarea></div>
<div><input type="submit" name="btnSubmit" id="btnSubmit" value="Submit" class="button" ></div>
</form>
</body>
</html>
View Example 8
Attribute selectors provide a way of targeting elements by looking at the attributes of those elements. Unlike the other examples in this article which are CSS3 selectors, the attribute selector is actually a CSS2.1 selector – it just doesn’t get much use because of lack of support in Internet Explorer 6. Using attribute selectors we can write rules for text inputs and form buttons without needing to add any classes to the markup. For example after removing the text and button classes from my text and submit button input elements I can use the following rules to target them:
form input[type="text"] {
border: 1px solid #333;
padding: 0.2em;
width: 400px;
}
form input[type="submit"]{
border: 1px solid #333;
background-color: #eee;
color: #000;
padding: 0.1em;
}
View Example 9
Another problem that I encounter with forms is where I am using CSS to position my labels and form elements by floating the labels. This works fine as long as I want all of my labels to be floated, however sometimes we get a set of radio buttons or a checkbox, and I don’t want the label field to be floated. As you can see in the below example the label for the checkbox is squashed up into the space used for the other labels, yet it makes more sense for the checkbox to display after the text.
I could use a class on this label element however CSS3 lets me to target the label attribute directly by looking at the value of the for attribute.
label[for="fOptIn"] {
float: none;
width: auto;
}
Being able to precisely target attributes in this way is incredibly useful, and once IE6 is no longer an issue this will really help to clean up our markup and save us from having to create all kinds of special cases when generating this markup on the server-side.
Browser support
The news for attribute selectors is actually pretty good with Internet Explorer 7+, Firefox 2+ and all other modern browsers all having support. As I have already mentioned this is a CSS2.1 selector and so we really should expect to be able to use it as we head into 2010! Internet Explorer 7 has slightly buggy support and will fail on the label example shown above however I discovered a workaround in the Sitepoint CSS reference comments. Adding the selector label[htmlFor="fOptIn"] to the correct selector will create a match for IE7.
IE6 does not support these selector but, once again, you can use jQuery to plug the holes in IE6 support. The following jQuery will add the text and button classes to your fields and also add a checks class to the label for the checkbox, which you can use to remove the float and width for this element.
$('form input[type="submit"]').addClass("button");
$('form input[type="text"]').addClass("text");
$('label[for="fOptIn"]').addClass("checks");
View Example 10
The selectors I’ve used in this article are easy to overlook as we do have ways to achieve these things currently. As developers – especially when we have frameworks and existing code that cope with these situations – it is easy to carry on as we always have done.
I think that the time has come to start to clean up our front and backend code and replace our reliance on classes with these more advanced selectors. With the help of a little JavaScript almost all users will still get the full effect and, where we are dealing with purely visual effects, there is definitely a case to be made for not worrying about the very small percentage of people with old browsers and no JavaScript. They will still receive a readable website, it may just be missing some of the finesse offered to the modern browsing experience. |
2009 |
Rachel Andrew |
rachelandrew |
2009-12-20T00:00:00+00:00 |
https://24ways.org/2009/cleaner-code-with-css3-selectors/ |
code |
| 31 |
Dealing with Emergencies in Git |
The stockings were hung by the chimney with care,
In hopes that version control soon would be there.
This summer I moved to the UK with my partner, and the onslaught of the Christmas holiday season began around the end of October (October!). It does mean that I’ve had more than a fair amount of time to come up with horrible Git analogies for this article. Analogies, metaphors, and comparisons help the learner hook into existing mental models about how a system works. They only help, however, if the learner has enough familiarity with the topic at hand to make the connection between the old and new information.
Let’s start by painting an updated version of Clement Clarke Moore’s Christmas living room. Empty stockings are hung up next to the fireplace, waiting for Saint Nicholas to come down the chimney and fill them with small treats. Holiday treats are scattered about. A bowl of mixed nuts, the holiday nutcracker, and a few clementines. A string of coloured lights winds its way up an evergreen.
Perhaps a few of these images are familiar, or maybe they’re just settings you’ve seen in a movie. It doesn’t really matter what the living room looks like though. The important thing is to ground yourself in your own experiences before tackling a new subject. Instead of trying to brute-force your way into new information, as an adult learner constantly ask yourself: ‘What is this like? What does this remind me of? What do I already know that I can use to map out this new territory?’ It’s okay if the map isn’t perfect. As you refine your understanding of a new topic, you’ll outgrow the initial metaphors, analogies, and comparisons.
With apologies to Mr. Moore, let’s give it a try.
Getting Interrupted in Git
When on the roof there arose such a clatter!
You’re happily working on your software project when all of a sudden there are freaking reindeer on the roof! Whatever you’ve been working on is going to need to wait while you investigate the commotion.
If you’ve got even a little bit of experience working with Git, you know that you cannot simply change what you’re working on in times of emergency. If you’ve been doing work, you have a dirty working directory and you cannot change branches, or push your work to a remote repository while in this state.
Up to this point, you’ve probably dealt with emergencies by making a somewhat useless commit with a message something to the effect of ‘switching branches for a sec’. This isn’t exactly helpful to future you, as commits should really contain whole ideas of completed work. If you get interrupted, especially if there are reindeer on the roof, the chances are very high that you weren’t finished with what you were working on.
You don’t need to make useless commits though. Instead, you can use the stash command. This command allows you to temporarily set aside all of your changes so that you can come back to them later. In this sense, stash is like setting your book down on the side table (or pushing the cat off your lap) so you can go investigate the noise on the roof. You aren’t putting your book away though, you’re just putting it down for a moment so you can come back and find it exactly the way it was when you put it down.
Let’s say you’ve been working in the branch waiting-for-st-nicholas, and now you need to temporarily set aside your changes to see what the noise was on the roof:
$ git stash
After running this command, all uncommitted work will be temporarily removed from your working directory, and you will be returned to whatever state you were in the last time you committed your work.
With the book safely on the side table, and the cat safely off your lap, you are now free to investigate the noise on the roof. It turns out it’s not reindeer after all, but just your boss who thought they’d help out by writing some code on the project you’ve been working on. Bless. Rolling your eyes, you agree to take a look and see what kind of mischief your boss has gotten themselves into this time.
You fetch an updated list of branches from the remote repository, locate the branch your boss had been working on, and checkout a local copy:
$ git fetch
$ git branch -r
$ git checkout -b helpful-boss-branch origin/helpful-boss-branch
You are now in a local copy of the branch where you are free to look around, and figure out exactly what’s going on.
You sigh audibly and say, ‘Okay. Tell me what was happening when you first realised you’d gotten into a mess’ as you look through the log messages for the branch.
$ git log --oneline
$ git log
By using the log command you will be able to review the history of the branch and find out the moment right before your boss ended up stuck on your roof.
You may also want to compare the work your boss has done to the main branch for your project. For this article, we’ll assume the main branch is named master.
$ git diff master
Looking through the commits, you may be able to see that things started out okay but then took a turn for the worse.
Checking out a single commit
Using commands you’re already familiar with, you can rewind through history and take a look at the state of the code at any moment in time by checking out a single commit, just like you would a branch.
Using the log command, locate the unique identifier (commit hash) of the commit you want to investigate. For example, let’s say the unique identifier you want to checkout is 25f6d7f.
$ git checkout 25f6d7f
Note: checking out '25f6d7f'.
You are in 'detached HEAD' state. You can look around,
make experimental changes and commit them, and you can
discard any commits you make in this state without
impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using @-b@ with the checkout command again. Example:
$ git checkout -b new_branch_name
HEAD is now at 25f6d7f... Removed first paragraph.
This is usually where people start to panic. Your boss screwed something up, and now your HEAD is detached. Under normal circumstances, these words would be a very good reason to panic.
Take a deep breath. Nothing bad is going to happen. Being in a detached HEAD state just means you’ve temporarily disconnected from a known chain of events. In other words, you’re currently looking at the middle of a story (or branch) about what happened – and you’re not at the endpoint for this particular story.
Git allows you to view the history of your repository as a timeline (technically it’s a directed acyclic graph). When you make commits which are not associated with a branch, they are essentially inaccessible once you return to a known branch. If you make commits while you’re in a detached HEAD state, and then try to return to a known branch, Git will give you a warning and tell you how to save your work.
$ git checkout master
Warning: you are leaving 1 commit behind, not connected to
any of your branches:
7a85788 Your witty holiday commit message.
If you want to keep them by creating a new branch, this may be a good time to do so with:
$ git branch new_branch_name 7a85788
Switched to branch 'master'
Your branch is up-to-date with 'origin/master'.
So, if you want to save the commits you’ve made while in a detached HEAD state, you simply need to put them on a new branch.
$ git branch saved-headless-commits 7a85788
With this trick under your belt, you can jingle around in history as much as you’d like. It’s not like sliding around on a timeline though. When you checkout a specific commit, you will only have access to the history from that point backwards in time. If you want to move forward in history, you’ll need to move back to the branch tip by checking out the branch again.
$ git checkout helpful-boss-branch
You’re now back to the present. Your HEAD is now pointing to the endpoint of a known branch, and so it is no longer detached. Any changes you made while on your adventure are safely stored in a new branch, assuming you’ve followed the instructions Git gave you. That wasn’t so scary after all, now, was it?
Back to our reindeer problem.
If your boss is anything like the bosses I’ve worked with, chances are very good that at least some of their work is worth salvaging. Depending on how your repository is structured, you’ll want to capture the good work using one of several different methods.
Back in the living room, we’ll use our bowl of nuts to illustrate how you can rescue a tiny bit of work.
Saving just one commit
About that bowl of nuts. If you’re like me, you probably had some favourite kinds of nuts from an assorted collection. Walnuts were generally the most satisfying to crack open. So, instead of taking the entire bowl of nuts and dumping it into a stocking (merging the stocking and the bowl of nuts), we’re just going to pick out one nut from the bowl. In Git terms, we’re going to cherry-pick a commit and save it to another branch.
First, checkout the main branch for your development work. From this branch, create a new branch where you can copy the changes into.
$ git checkout master
$ git checkout -b rescue-the-boss
From your boss’s branch, helpful-boss-branch locate the commit you want to keep.
$ git log --oneline helpful-boss-branch
Let’s say the commit ID you want to keep is e08740b. From your rescue branch, use the command cherry-pick to copy the changes into your current branch.
$ git cherry-pick e08740b
If you review the history of your current branch again, you will see you now also have the changes made in the commit in your boss’s branch.
At this point you might need to make a few additional fixes to help your boss out. (You’re angling for a bonus out of all this. Go the extra mile.) Once you’ve made your additional changes, you’ll need to add that work to the branch as well.
$ git add [filename(s)]
$ git commit -m "Building on boss's work to improve feature X."
Go ahead and test everything, and make sure it’s perfect. You don’t want to introduce your own mistakes during the rescue mission!
Uploading the fixed branch
The next step is to upload the new branch to the remote repository so that your boss can download it and give you a huge bonus for helping you fix their branch.
$ git push -u origin rescue-the-boss
Cleaning up and getting back to work
With your boss rescued, and your bonus secured, you can now delete the local temporary branches.
$ git branch --delete rescue-the-boss
$ git branch --delete helpful-boss-branch
And settle back into your chair to wait for Saint Nicholas with your book, your branch, and possibly your cat.
$ git checkout waiting-for-st-nicholas
$ git stash pop
Your working directory has been returned to exactly the same state you were in at the beginning of the article.
Having fun with analogies
I’ve had a bit of fun with analogies in this article. But sometimes those little twists on ideas can really help someone pick up a new idea (git stash: it’s like when Christmas comes around and everyone throws their fashion sense out the window and puts on a reindeer sweater for the holiday party; or git bisect: it’s like trying to find that one broken light on the string of Christmas lights). It doesn’t matter if the analogy isn’t perfect. It’s just a way to give someone a temporary hook into a concept in a way that makes the concept accessible while the learner becomes comfortable with it. As the learner’s comfort increases, the analogies can drop away, making room for the technically correct definition of how something works.
Or, if you’re like me, you can choose to never grow old and just keep mucking about in the analogies. I’d argue it’s a lot more fun to play with a string of Christmas lights and some holiday cheer than a directed acyclic graph anyway. |
2014 |
Emma Jane Westby |
emmajanewestby |
2014-12-02T00:00:00+00:00 |
https://24ways.org/2014/dealing-with-emergencies-in-git/ |
code |
| 289 |
Front-End Developers Are Information Architects Too |
The theme of this year’s World IA Day was “Information Everywhere, Architects Everywhere”. This article isn’t about what you may consider an information architect to be: someone in the user-experience field, who maybe studied library science, and who talks about taxonomies. This is about a realisation I had a couple of years ago when I started to run an increasing amount of usability-testing sessions with people who have disabilities: that the structure, labelling, and connections that can be made in front-end code is information architecture. People’s ability to be successful online is unequivocally connected to the quality of the code that is written.
Places made of information
In information architecture we talk about creating places made of information. These places are made of ones and zeros, but we talk about them as physical structures. We talk about going onto a social media platform, posting in blogs, getting locked out of an environment, and building applications. In 2002, Andrew Hinton stated:
People live and work in these structures, just as they live and work in their homes, offices, factories and malls. These places are not virtual: they are as real as our own minds.
25 Theses
We’re creating structures which people rely on for significant parts of their lives, so it’s critical that we carry out our work responsibly. This means we must use our construction materials correctly. Luckily, our most important material, HTML, has a well-documented specification which tells us how to build robust and accessible places. What is most important, I believe, is to understand the semantics of HTML.
Semantics
The word “semantic” has its origin in Greek words meaning “significant”, “signify”, and “sign”. In the physical world, a structure can have semantic qualities that tell us something about it. For example, the stunning Westminster Abbey inspires awe and signifies much about the intent and purpose of the structure. The building’s size; the quality of the stone work; the massive, detailed stained glass: these are all signs that this is a building meant for something the creators deemed important. Alternatively consider a set of large, clean, well-positioned, well-lit doors on the ground floor of an office block: they don’t need an “entrance” sign to communicate their use and to stop people trying to use a nearby fire exit to get into the building. The design of the doors signify their usage. Sometimes a more literal and less awe-inspiring approach to communicating a building’s purpose happens, but the affect is similar: the building is signifying something about its purpose.
HTML has over 115 elements, many of which have semantics to signify structure and affordance to people, browsers, and assistive technology. The HTML 5.1 specification mentions semantics, stating:
Elements, attributes, and attribute values in HTML are defined … to have certain meanings (semantics). For example, the <ol> element represents an ordered list, and the lang attribute represents the language of the content.
HTML 5.1 Semantics, structure, and APIs of HTML documents
HTML’s baked-in semantics means that developers can architect their code to signify structure, create relationships between elements, and label content so people can understand what they’re interacting with. Structuring and labelling information to make it available, usable, and understandable to people is what an information architect does. It’s also what a front-end developer does, whether they realise it or not.
A brief introduction to information architecture
We’re going to start by looking at what an information architect is. There are many definitions, and I’m going to quote Richard Saul Wurman, who is widely regarded as the father of information architecture. In 1976 he said an information architect is:
the individual who organizes the patterns inherent in data, making the complex clear; a person who creates the structure or map of information which allows others to find their personal paths to knowledge; the emerging 21st century professional occupation addressing the needs of the age focused upon clarity, human understanding, and the science of the organization of information.
Of Patterns And Structures
To me, this clearly defines any developer who creates code that a browser, or other user agent (for example, a screen reader), uses to create a structured, navigable place for people.
Just as there are many definitions of what an information architect is, there are for information architecture itself. I’m going to use the definition from the fourth edition of Information Architecture For The World Wide Web, in which the authors define it as:
The structural design of shared information environments.
The synthesis of organization, labeling, search, and navigation systems within digital, physical, and cross-channel ecosystems.
The art and science of shaping information products and experiences to support usability, findability, and understanding.
Information Architecture For The World Wide Web, 4th Edition
To me, this describes front-end development. Done properly, there is an art to creating robust, accessible, usable, and findable spaces that delight all our users. For example, at 2015’s State Of The Browser conference, Edd Sowden talked about the accessibility of <table>s. He discovered that by simply not using the semantically-correct <th> element to mark up <table> headings, in some situations browsers will decide that a <table> is being used for layout and essentially make it invisible to assistive technology. Another example of how coding practices can affect the usability and findability of content is shown by Léonie Watson in her How ARIA landmark roles help screen reader users video. By using ARIA landmark roles, people who use screen readers are quickly able to identify and jump to common parts of a web page.
Our definitions of information architects and information architecture mention patterns, rules, organisation, labelling, structure, and relationships. There are numerous different models for how these elements get boiled down to their fundamentals. In his Understanding Context book, Andrew Hinton calls them Labels, Relationships, and Rules; Jorge Arango calls them Links, Nodes, And Order; and Dan Klyn uses Ontology, Taxonomy, and Choreography, which is the one we’re going to use. Dan defines these terms as:
Ontology
The definition and articulation of the rules and patterns that govern the meaning of what we intend to communicate.
What we mean when we say what we say.
Taxonomy
The arrangements of the parts. Developing systems and structures for what everything’s called, where everything’s sorted, and the relationships between labels and categories
Choreography
Rules for interaction among the parts. The structures it creates foster specific types of movement and interaction; anticipating the way users and information want to flow and making affordance for change over time.
We now have definitions of an information architect, information architecture, and a model of the elements of information architecture. But is writing HTML really creating information or is it just wrangling data and metadata? When does data turn into information? In his book Managing For The Future Peter Drucker states:
… data is not information. Information is data endowed with relevance and purpose.
Managing For The Future
If we use the correct semantic element to mark up content then we’re developing with purpose and creating relevance. For example, if we follow the advice of the HTML 5.1 specification and mark up headings using heading rank instead of the outline algorithm, we’re creating a structure where the depth of one heading is relevant to the previous one. Architected correctly, an <h2> element should be relevant to its parent, which should be the <h1>. By following the HTML specification we can create a structured, searchable, labeled document that will hopefully be relevant to what our users need to be successful. If you’ve never used a screen reader, you might be wondering how the headings on a page are searchable. Screen readers give users the ability to interact with headings in a couple of ways:
by creating a list of headings so users can quickly scan the page for information
by using a keyboard command to cycle through one heading at a time
If we had a document for Christmas Day TV we might structure it something like this:
<h1>Christmas Day TV schedule</h1>
<h2>BBC1</h2>
<h3>Morning</h3>
<h3>Evening</h3>
<h2>BBC2</h2>
<h3>Morning</h3>
<h3>Evening</h3>
<h2>ITV</h2>
<h3>Morning</h3>
<h3>Evening</h3>
<h2>Channel 4</h2>
<h3>Morning</h3>
<h3>Evening</h3>
If I use VoiceOver to generate a list of headings, I get this:
Once I have that list I can use keyboard commands to filter the list based on the heading level. For example, I can press 2 to hear just the <h2>s:
If we hadn’t used headings, of if we’d nested them incorrectly, our users would be frustrated.
Putting this together
Let’s put this together with an example of a button that, when pressed, toggles the appearance of a panel of links. There are numerous ways we could create a button on a web page, but the best way is to just use a <button>. Every browser understands what a <button> is, how it works, and what keyboard shortcuts should be used with them. The HTML specification for the <button> element says:
The <button> element represents a button labeled by its contents.
The contents that a <button> can have include the type attribute, any relevant ARIA attributes, and the actual text label that the user sees. This information is more important than the visual design: it doesn’t matter how beautiful or obtuse the design is, if the underlying code is non-semantic and poorly labelled, people are going to struggle to use it. Here are three buttons, each created with the same HTML but with different designs:
Regardless of what they look like, because we’ve used semantic HTML instead of a bunch of meaningless <div>s or <span>s, people who use assistive technology are going to benefit. Out of the box, without any extra development effort, a <button> is accessible and usable with a keyboard. We don’t have to write event handlers to listen for people pressing the Enter key or the space bar, which we would have to do if we’d faked a button with non-semantic elements. Our <button> can also be quickly findable: for example, in the same way it’s possible to create a list of headings with a screen reader, I can also create a list of form elements and then quickly jump to the one I want.
Now we have our <button>, let’s add the panel we’re toggling the appearance of. Here’s our code:
<button aria-controls="panel" aria-expanded="false" class="settings" id="settings" type="button">Settings</button>
<div class="panel hidden" id="panel">
<ul aria-labelledby="settings">
<li><a href="…">Account</a></li>
<li><a href="…">Privacy</a></li>
<li><a href="…">Security</a></li>
</ul>
</div>
There’s quite a bit going on here. We’re using the:
aria-controls attribute to architect a connection between the <button> element and the panel whose appearance it controls. When some assistive technology, for example the JAWS screen reader, encounters an element with aria-controls it audibly tells a user about the controlled expanded element and gives them the ability to move focus to it.
aria-expanded attribute to denote whether the panel is visible or not. We toggle this value using JavaScript to true when the panel is visible and false when it’s not. This important attribute tells people who use screen readers about the state of the elements they’re interacting with. For example, VoiceOver announces Settings expanded button when the panel is visible and Settings collapsed button when it’s hidden.
aria-labelledby attribute to give the list a title of “Settings”. This can benefit some users of assistive technology. For example, screen readers can cycle through all the lists on a page, so being able to title them can improve findability. Being able to hear list Settings three items is, I’d argue, more useful than list three items. By doing this we’re supporting usability and findability.
<ul> element to contain our list of links in our panel.
Let’s look at the choice of <ul> to contain our settings choices. Firstly, our settings are related items, so they belong in a structure that semantically groups things. This is something that a list can do that other elements or patterns can’t. This pattern, for example, isn’t semantic and has no structure:
<div><a href="…">Account</a></div>
<div><a href="…">Privacy</a></div>
<div><a href="…">Security</a></div>
All we have there is three elements next to each other on the screen and in the DOM. That is not robust code that signifies anything.
Why are we using an unordered list as opposed to an ordered list or a definition list? A quick look at the HTML specification tells us why:
The <ul> element represents a list of items, where the order of the items is not important — that is, where changing the order would not materially change the meaning of the document.
The HTML 5.1 specification’s description of the element
Will the meaning of our document materially change if we moved the order of our links around? Nope. Therefore, I’d argue, we’ve used the correct element to structure our content.
These coding decisions are information architecture
I believe that what we’ve done here is pure information architecture. Going back to Dan Klyn’s model, we’ve practiced ontology by looking at the meaning of what we’re intending to communicate:
we want to communicate there is an interactive element that toggles the appearance of an element on a page so we’ve used one, a <button>, with those semantics.
programmatically we’ve used the type='button' attribute to signify that the button isn’t a menu, reset, or submit element.
visually we’ve designed our <button> look like something that can be interacted with and, importantly, we haven’t removed the focus ring.
we’ve labelled the <button> with the word “Settings” so that our users will hopefully understand what the button is for.
we’ve used an <ul> element to structure and communicate our list of related items.
We’ve also practiced taxonomy by developing systems and structures and creating relationships between our elements:
by connecting the <button> to the panel using the aria-controls attribute we’ve programmatically created a relationship between two elements.
we’ve developed a structure in our elements by labelling our <ul> with the same name as the <button> that controls its appearance.
And finally we’ve practiced choreography by creating elements that foster movement and interaction. We’ve anticipated the way users and information want to flow:
we’ve used a <button> element that is interactive and accessible out of the box.
our aria-controls attribute can help some people who use screen readers move easily from the <button> to the panel it controls.
by toggling the value of the aria-expanded attribute we’ve developed a system that tells assistive technology about the status of the relationship between our elements: the panel is visible or the panel is hidden.
we’ve made sure our information is more usable and findable no matter how our users want or need to interact with it. Regardless of how someone “sees” our work they’re going to be able to use it because we’ve architected multiple ways to access our information.
Information architecture, robust code, and accessibility
The United Nations estimates that around 10% of the world’s population has some form of disability which, at the time of writing, is around 740,000,000 people. That’s a lot of people who rely on well-architected semantic code that can be interpreted by whatever assistive technology they may need to use.
If everyone involved in the creation of our places made of information practiced information architecture it would make satisfying the WCAG 2.0 POUR principles so much easier. Our digital construction practices directly affect the quality of life of millions of people, and we have a responsibility to make technology available to them. In her book How To Make Sense Of Any Mess, Abby Covert states:
If we’re going to be successful in this new world, we need to see information as a workable material and learn to architect it in a way that gets us to our goals.
How To Make Sense Of Any Mess
I believe that the world will be a better place if we start treating front-end development as information architecture. |
2016 |
Francis Storr |
francisstorr |
2016-12-17T00:00:00+00:00 |
https://24ways.org/2016/front-end-developers-are-information-architects-too/ |
code |
| 298 |
First Steps in VR |
The web is all around us. As web folk, it is our responsibility to consider the impact our work can have. Part of this includes thinking about the future; the web changes lives and if we are building the web then we are the ones making decisions that affect people in every corner of the world. I find myself often torn between wanting to make the right decisions, and just wanting to have fun. To fiddle and play. We all know how important it is to sometimes just try ideas, whether they will amount to much or not.
I think of these two mindsets as production and prototyping, though of course there are lots of overlap and phases in between. I mention this because virtual reality is currently seen as a toy for rich people, and in some ways at the moment it is. But with WebVR we are able to create interesting experiences with a relatively low entry point. I want us to have open minds, play around with things, and then see how we can use the tools we have at our disposal to make things that will help people.
Every year we see articles saying it will be the “year of virtual reality”, that was especially prevalent this year. 2016 has been a year of progress, VR isn’t quite mainstream but with efforts like Playstation VR and Google Cardboard, we are definitely seeing much more of it. This year also saw the consumer editions of the Oculus Rift and HTC Vive. So it does seem to be a good time for an overview of how to get involved with creating virtual reality on the web.
WebVR is an API for connecting to devices and retrieving continuous data such as the position and orientation. Unlike the Web Audio API and some other APIs, WebVR does not feel like a framework. You use it however you want, taking the data and using it as you wish. To make it easier, there are plenty of resources such as Three.js, A-Frame and ReactVR that help to make the heavy lifting a bit easier.
Getting Started with A-Frame
I like taking the opportunity to learn new things whenever I can. So while planning this article I thought that instead of trying to teach WebGL or even Three.js in a way that is approachable for all, I would create my first project using A-Frame and write about that. This is not a tutorial as such, I just want to show how to go about getting involved with VR. The beauty of A-Frame is that it is very similar to web components, you can just write HTML to build worlds that will automatically work on all the different types of devices. It uses WebGL and WebVR but in such a way that it quite drastically reduces the learning curve. That’s not to say you can’t build complex things, you have complete access to write JavaScript and shaders.
I’m lazy. Whenever I learn a new language or framework I have found that the best way, personally, for me to learn is to have a project and to copy the starting code from someone else. A project lets you have a good idea of what you want to produce and it means you can ignore a lot of the irrelevant documentation, focussing purely on what you need. That reduces the stress of figuring things out. Copying code also makes it easier, because you know your boilerplate code is working. There’s nothing worse than getting stuck before anything actually works the first time. So I tinker. I take code and I modify it, I play around. It’s fun.
For this project I wanted to keep things as simple as possible, so I can easily explain it without the classic “draw a circle then draw an owl”. I wrote a list of requirements, with some stretch goals that you can give a try yourself if you fancy:
Must work on Google Cardboard at a minimum, because of price
Therefore, it must not rely on having a controller
Auto-moving around a maze would be a good example
Move in direction you look
Stretch goal: Scoring, time until you hit a wall or get stuck in maze
Stretch goal: Levels, so the map doesn’t need to be random
Stretch goal: Snow!
I decided to base this project on an example, Platforms, by Don McCurdy who wrote the really useful aframe-extras. Platforms has random 3D blocks that you can jump onto, going up into the sky. So I took his code and reduced it so that the blocks are randomly spread on the ground.
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width">
<title>24 ways</title>
<script src="https://aframe.io/releases/0.3.2/aframe.js"></script>
<script src="//cdn.rawgit.com/donmccurdy/aframe-extras/v2.6.1/dist/aframe-extras.min.js"></script>
</head>
<body>
<a-scene>
<a-entity id="player"
camera
universal-controls
kinematic-body
position="0 1.8 0">
</a-entity>
<a-entity id="walls"></a-entity>
<a-grid id="ground" static-body></a-grid>
<a-sky id="sky" color="#AADDF0"></a-sky>
<!-- Lighting -->
<a-light type="ambient" color="#ccc"></a-light>
</a-scene>
<script>
document.querySelector('a-scene').addEventListener('render-target-loaded', function () {
var MAP_SIZE = 10,
PLATFORM_SIZE = 5,
NUM_PLATFORMS = 50;
var platformsEl = document.querySelector('#walls');
var v, box;
for (var i = 0; i < NUM_PLATFORMS; i++) {
// y: 0 is ground
v = {
x: (Math.floor(Math.random() * MAP_SIZE) - PLATFORM_SIZE) * PLATFORM_SIZE,
y: PLATFORM_SIZE / 2,
z: (Math.floor(Math.random() * MAP_SIZE) - PLATFORM_SIZE) * PLATFORM_SIZE
};
box = document.createElement('a-box');
platformsEl.appendChild(box);
box.setAttribute('color', '#39BB82');
box.setAttribute('width', PLATFORM_SIZE);
box.setAttribute('height', PLATFORM_SIZE);
box.setAttribute('depth', PLATFORM_SIZE);
box.setAttribute('position', v.x + ' ' + v.y + ' ' + v.z);
box.setAttribute('static-body', '');
}
console.info('Platforms loaded.');
});
</script>
</body>
</html>
As you can see, this is very readable. Especially if you ignore the JavaScript that is used to create the maze. A-Frame (with A-Frame Extras) gives you a lot of power with relatively little to learn. We start with an <a-scene> which is the container for everything that is going to show up on the screen. There are a few <a-entity> which can be compared to <div> as they are essentially non-semantic containers, able to be used for any purpose. The attributes are used to define functionality, for example the camera attribute sets the entity to function as a camera and kinematic-body makes it collide instead of go through objects. Attributes are also used to set position and sizes, often using JavaScript to dynamically define them.
Styling
Now we’ve got the HTML written, we need to style it. To do this we add A-Frame compatible attributes such as color and material. I recommend playing around, you can get some quite impressive effects fairly easily. Originally I wanted a light snowy maze but it ended up being dark and foggy, as I really liked the feeling it gave.
Note, you will probably need a server running for images to work. You can do this by running python -m "SimpleHTTPServer" in the folder where the code is, then go to localhost:8000 in browser.
Textures
Unless you are going for a cartoony style, you probably want to find some textures. I found some on textures.com, one image worked well for the walls and the other for the floor.
<a-assets>
<img id="texture-floor" src="floor.jpg">
<img id="texture-wall" src="wall.jpg">
</a-assets>
The <a-assets> is used to define (as well as preload and cache) all assets, including images, audio and video. As you can see, images in the Asset Management System just use normal img tags. The ids are important here as we can use them later for using the textures.
To apply a texture to an object, you create a material. For a simple material where it just shows the image, you set the src to the id selector of the image.
Replace:
<a-grid id="ground" static-body></a-grid>
With:
<a-grid id="ground" static-body material="src: #texture-floor"></a-grid>
This will automatically make the image repeat over the entire floor, in my case filling it with bricks. The walls are pretty much identical, with the slight exception that it is set in JavaScript as they are dynamically defined.
box.setAttribute('material', 'src: #texture-wall');
That’s it for the textures, for now at least. These will not look completely realistic, as the light will bump off the rectangular wall rather than texture itself. This can be improved by using maps, textures that are used to modify the shape and physical properties of the object.
Lighting
The next part of styling is lighting. By using fog and different types of lighting, we are able to add atmospheric details to the game to make it feel that bit more realistic and polished.
There are lots of types of light in A-Frame (most coming from Three.js). You can add a light either by using the <a-light> entity or by attaching a light attribute to any other entity. If there are no lights defined then A-Frame adds some by default so that the scene is always lit.
To start with I wanted to light up the scene with a general light, type="ambient", so that the whole game felt slightly dark. I chose to set the light to a reddish colour #92455E. After playing around with intensity I chose 0.4, it added enough light to get the feeling I wanted without it being overly red. I also added a blue skybox (<a-sky>), as it looked a bit odd with a white sky.
<a-light type="ambient" color="#92455E" intensity="0.4"></a-light>
<a-sky id="sky" color="#0000ff"></a-sky>
I felt that the maze looked good with a red tinge but it was a bit flat, everything was the same colour and it was a bit dark. So I added a light within the #player entity, this could have been as an attribute but I set it as a child a-light instead. By using type="point" with a high intensity and low distance, it showed close walls as being lighter. It also added a sort-of object to the player, it isn’t a walking human or anything but by moving light where the player is it feels a bit more physical.
<a-light color="#fff" distance="5" intensity="0.7" type="point"></a-light>
By this point it was starting to look decent, so I wanted to add the fog to really give some personality and depth to the maze. To do this I added the fog attribute to the <a-scene> with type=exponential so it looks thicker the further away it is and a mid intensity, so you feel a bit lost but can still see.
I was very happy with this result. It took a lot of playing around with colours and values, which is fun in itself. I highly recommend you take the code (or write your own) and play around with the numbers.
Movement
One of the reasons I decided to use aframe-extras is that it has a few different camera controls built in. As you saw earlier, I am using the universal-controls which gives WASD (keyboard) controls by default. I wanted to make it automatically move in the direction that you’re looking, but I wasn’t quite sure how without rewriting the controls. So I asked Don McCurdy for advice and he very nicely gave me a small snippet of code to get it working.
AFRAME.registerComponent('automove-controls', {
init: function () {
this.speed = 0.1;
this.isMoving = true;
this.velocityDelta = new THREE.Vector3();
},
isVelocityActive: function () {
return this.isMoving;
},
getVelocityDelta: function () {
this.velocityDelta.z = this.isMoving ? -speed : 0;
return this.velocityDelta.clone();
}
});
Replace:
universal-controls
With:
universal-controls="movementControls: automove, gamepad, keyboard"
This works by creating a component automove-controls that adds auto-move to the player without overriding movement completely. It doesn’t even touch direction, it just checks if isMoving is true then moves the player by the set speed. Components can be creating for adding all kinds of functionality with relative ease. It makes it very powerful for people of all difficulty levels.
Building a map
Currently the maze is created randomly, which is great but means there will often be walls that overlap or the player gets trapped with nowhere to go. So to solve this, I decided to use a map editor (Tiled) so that we can create the mazes ourselves. This is a great start towards one of the stretch goals, levels.
I made the maze in Tiled by finding a random tileset online (we don’t need to actually show the images), I used one tile for the wall and another for the player. Then I exported as a JavaScript file and modified it in my text editor to get rid of everything I didn’t need. I made it so 0 is the path, 1 is the wall and 2 is the player. I then added the script to the HTML, as a separate file so it’s easy to update in the future.
var map =
{
"data":[1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1, 1, 0, 1, 1, 0, 1, 1, 1, 0, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1, 1, 0, 0, 0, 1, 0, 1, 1, 0, 1, 1, 0, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 0, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1],
"height":10,
"width":10
}
As you can see, this gives a simple 10x10 maze with some dead ends. The player starts in the bottom right corner (my choice, could be anywhere). I rewrote the random platforms code (from Don’s example) to instead loop over the map data and place walls where it is 1 and position the player where data is 2. I set the position so that the origin of the map would be 0,1.5,0. The y axis is in this case the height (ground being 0), but if a wall is positioned at 0 by its centre then some of it is underground. So the y needed to be the height divided by 2.
document.querySelector('a-scene').addEventListener('render-target-loaded', function () {
var WALL_SIZE = 5,
WALL_HEIGHT = 3;
var el = document.querySelector('#walls');
var wall;
for (var x = 0; x < map.height; x++) {
for (var y = 0; y < map.width; y++) {
var i = y*map.width + x;
var position = (x-map.width/2)*WALL_SIZE + ' ' + 1.5 + ' ' + (y-map.height/2)*WALL_SIZE;
if (map.data[i] === 1) {
// Create wall
wall = document.createElement('a-box');
el.appendChild(wall);
wall.setAttribute('color', '#fff');
wall.setAttribute('material', 'src: #texture-wall;');
wall.setAttribute('width', WALL_SIZE);
wall.setAttribute('height', WALL_HEIGHT);
wall.setAttribute('depth', WALL_SIZE);
wall.setAttribute('position', position);
wall.setAttribute('static-body', ');
}
if (map.data[i] === 2) {
// Set player position
document.querySelector('#player').setAttribute('position', position);
}
}
}
console.info('Walls added.');
});
With this added, it makes it nice and easy to change around the map as well as to add new features. Perhaps you want monsters or objects. Just set the number in the map data and add an if statement to the loop. In the future you could add layers, so multiple things can be in the same position. Or perhaps even make the maze go up the y axis too, with ramps or staircases. There’s a lot you can do with relative ease. As you can see, A-Frame really does reduce the learning curve of 3D and VR on the web.
It’s Not All Fun And Games
A lot of examples of virtual reality are games, including this one. So it is understandable to think that VR is for gaming, but actually that’s just a tiny subset. There are all sorts of applications for VR, including story telling, data visualisation and even meditation.
There have been a number of cases where it has been shown virtual reality can help as a tool for therapies:
Oxford study finds virtual reality can help treat severe paranoia
Virtual Reality Therapy for Phobias at the Duke Faculty Practice
Bravemind: Virtual Reality Exposure Therapy at the University of Southern California
These are just a few examples of where virtual reality is being used around the world to help people feel better and get through some very tough times. There have also been examples of it being used for simulating war zones or medical situations, both as a teaching and journalism tool.
Wrapping Up
Ten years ago, on this very site, Cameron Moll wrote an article explaining the mobile web. He explained how mobile phones with data plans were becoming increasingly common, that WAP 2.0 included the XHTML Mobile Profile meaning it would be familiar with web folk. “The mobile web is rapidly becoming an XHTML environment, and thus you and I can apply our existing “desktop web” skills to understand how to develop content for it.”
We can look at that and laugh a little, we have come a very long way in the last decade. Even people in developing countries with very little money have mobile phones with access to a web that is far more capable than the “desktop web” Cameron was referring to.
So while I am not saying virtual reality is going to change the world or replace our phones, who knows! We can use our skills as web folk to dabble, we don’t need to learn any new languages. If on the 2026 edition of 24 ways, somebody references this article and looks at how far we have come… well, let’s hope we have used our skills well and made the world just that little bit better. And if VR is a fad? Well it’s fun… have a go anyway. |
2016 |
Shane Hudson |
shanehudson |
2016-12-11T00:00:00+00:00 |
https://24ways.org/2016/first-steps-in-vr/ |
code |
| 38 |
Websites of Christmas Past, Present and Future |
The websites of Christmas past
The first website was created at CERN. It was launched on 20 December 1990 (just in time for Christmas!), and it still works today, after twenty-four years. Isn’t that incredible?!
Why does this website still work after all this time? I can think of a few reasons.
First, the authors of this document chose HTML. Of course they couldn’t have known back then the extent to which we would be creating documents in HTML, but HTML always had a lot going for it. It’s built on top of plain text, which means it can be opened in any text editor, and it’s pretty readable, even without any parsing.
Despite the fact that HTML has changed quite a lot over the past twenty-four years, extensions to the specification have always been implemented in a backwards-compatible manner. Reading through the 1992 W3C document HTML Tags, you’ll see just how it has evolved. We still have h1 – h6 elements, but I’d not heard of the <plaintext> element before. Despite being deprecated since HTML2, it still works in several browsers. You can see it in action on my website.
As well as being written in HTML, there is no run-time compilation of code; the first website simply consists of HTML files transmitted over the web. Due to its lack of complexity, it stood a good chance of surviving in the turbulent World Wide Web.
That’s all well and good for a simple, static website. But websites created today are increasingly interactive. Many require a login and provide experiences that are tailored to the individual user. This type of dynamic website requires code to be executed somewhere.
Traditionally, dynamic websites would execute such code on the server, and transmit a simple HTML file to the user. As far as the browser was concerned, this wasn’t much different from the first website, as the additional complexity all happened before the document was sent to the browser.
Doing it all in the browser
In 2003, the first single page interface was created at slashdotslash.com. A single page interface or single page app is a website where the page is created in the browser via JavaScript. The benefit of this technique is that, after the initial page load, subsequent interactions can happen instantly, or very quickly, as they all happen in the browser.
When software runs on the client rather than the server, it is often referred to as a fat client. This means that the bulk of the processing happens on the client rather than the server (which can now be thin).
A fat client is preferred over a thin client because:
It takes some processing requirements away from the server, thereby reducing the cost of servers (a thin server requires cheaper, or fewer servers).
They can often continue working offline, provided no server communication is required to complete tasks after initial load.
The latency of internet communications is bypassed after initial load, as interactions can appear near instantaneous when compared to waiting for a response from the server.
But there are also some big downsides, and these are often overlooked:
They can’t work without JavaScript. Obviously JavaScript is a requirement for any client-side code execution. And as the UK Government Digital Service discovered, 1.1% of their visitors did not receive JavaScript enhancements. Of that 1.1%, 81% had JavaScript enabled, but their browsers failed to execute it (possibly due to dropping the internet connection). If you care about 1.1% of your visitors, you should care about the non-JavaScript experience for your website.
The browser needs to do all the processing. This means that the hardware it runs on needs to be fast. It also means that we require all clients to have largely the same capabilities and browser APIs.
The initial payload is often much larger, and nothing will be rendered for the user until this payload has been fully downloaded and executed. If the connection drops at any point, or the code fails to execute owing to a bug, we’re left with the non-JavaScript experience.
They are not easily indexed as every crawler now needs to run JavaScript just to receive the content of the website.
These are not merely edge case issues to shirk off. The first three issues will affect some of your visitors; the fourth affects everyone, including you.
What problem are we trying to solve?
So what can be done to address these issues? Whereas fat clients solve some inherent issues with the web, they seem to create as many problems. When attempting to resolve any issue, it’s always good to try to uncover the original problem and work forwards from there. One of the best ways to frame a problem is as a user story. A user story considers the who, what and why of a need. Here’s a template:
As a {who} I want {what} so that {why}
I haven’t got a specific project in mind, so let’s refer to the who as user. Here’s one that could explain the use of thick clients.
As a user I want the site to respond to my actions quickly so that I get immediate feedback when I do something.
This user story could probably apply to a great number of websites, but so could this:
As a user I want to get to the content quickly, so that I don’t have to wait too long to find out what the site is all about or get the content I need.
A better solution
How can we balance both these user needs? How can we have a website that loads fast, and also reacts fast? The solution is to have a thick server, that serves the complete document, and then a thick client, that manages subsequent actions and replaces parts of the page. What we’re talking about here is simply progressive enhancement, but from the user’s perspective.
The initial payload contains the entire document. At this point, all interactions would happen in a traditional way using links or form elements. Then, once we’ve downloaded the JavaScript (asynchronously, after load) we can enhance the experience with JavaScript interactions. If for whatever reason our JavaScript fails to download or execute, it’s no biggie – we’ve already got a fully functioning website. If an API that we need isn’t available in this browser, it’s not a problem. We just fall back to the basic experience.
This second point, of having some minimum requirement for an enhanced experience, is often referred to as cutting the mustard, first used in this sense by the BBC News team. Essentially it’s an if statement like this:
if('querySelector' in document
&& 'localStorage' in window
&& 'addEventListener' in window) {
// bootstrap the JavaScript application
}
This code states that the browser must support the following methods before downloading and executing the JavaScript:
document.querySelector (can it find elements by CSS selectors)
window.localStorage (can it store strings)
window.addEventListener (can it bind to events in a standards-compliant way)
These three properties are what the BBC News team decided to test for, as they are present in their website’s JavaScript. Each website will have its own requirements. The last method, window.addEventListener is in interesting one. Although it’s simple to bind to events on IE8 and earlier, these browsers have very inconsistent support for standards. Making any JavaScript-heavy website work on IE8 and earlier is a painful exercise, and comes at a cost to all users on other browsers, as they’ll download unnecessary code to patch support for IE.
JavaScript API support by browser.
I discovered that IE8 supports 12% of the current JavaScript APIs, while IE9 supports 16%, and IE10 51%. It seems, then, that IE10 could be the earliest version of IE that I’d like to develop JavaScript for. That doesn’t mean that users on browsers earlier than 10 can’t use the website. On the contrary, they get the core experience, and because it’s just HTML and CSS, it’s much more likely to be bug-free, and could even provide a better experience than trying to run JavaScript in their browser. They receive the thin client experience.
By reducing the number of platforms that our enhanced JavaScript version supports, we can better focus our efforts on those platforms and offer an even greater experience to those users. But we can only do that if we use progressive enhancement. Otherwise our website would be completely broken for all other users.
So what we have is a thick server, capable of serving the entire website to our users, complete with all core functionality needed for our users to complete their tasks; and we have a thick client on supported browsers, which can bring an even greater experience to those users.
This is all transparent to users. They may notice that the website seems snappier on the new iPhone they received for Christmas than on the Windows 7 machine they got five years ago, but then they probably expected it to be faster on their iPhone anyway.
Isn’t this just more work?
It’s true that making a thick server and a thick client is more work than just making one or the other. But there are some big advantages:
The website works for everyone.
You can decide when users get the enhanced experience.
You can enhance features in an iterative (or agile) manner.
When the website breaks, it doesn’t break down.
The more you practise this approach, the quicker you will become.
The websites of Christmas present
The best way to discover websites using this technique of progressive enhancement is to disable JavaScript and see if the website breaks. I use the Web Developer extension, which is available for Chrome and Firefox. It lets me quickly disable JavaScript.
Web Developer extension.
24 ways works with and without JavaScript. Try using the menu icon to view the navigation. Without JavaScript, it’s a jump link to the bottom of the page, but with JavaScript, the menu slides in from the right.
24 ways navigation with JavaScript disabled.
24 ways navigation with working JavaScript.
Google search will also work without JavaScript. You won’t get instant search results or any prerendering, because those are enhancements.
For a more app-like example, try using Twitter. Without JavaScript, it still works, and looks nearly identical. But when you load JavaScript, links open in modal windows and all pages are navigated much quicker, as only the content that has changed is loaded. You can read about how they achieved this in Twitter’s blog posts Improving performance on twitter.com and Implementing pushState for twitter.com.
Unfortunately Facebook doesn’t use progressive enhancement, which not only means that the website doesn’t work without JavaScript, but it takes longer to load. I tested it on WebPagetest and if you compare the load times of Twitter and Facebook, you’ll notice that, despite putting similar content on the page, Facebook takes two and a half times longer to render the core content on the page.
Facebook takes two and a half times longer to load than Twitter.
Websites of Christmas yet to come
Every project is different, and making a website that enjoys a long life, or serves a larger number of users may or may not be a high priority. But I hope I’ve convinced you that it certainly is possible to look to the past and future simultaneously, and that there can be significant advantages to doing so. |
2014 |
Josh Emerson |
joshemerson |
2014-12-08T00:00:00+00:00 |
https://24ways.org/2014/websites-of-christmas-past-present-and-future/ |
code |
| 128 |
Boost Your Hyperlink Power |
There are HTML elements and attributes that we use every day. Headings, paragraphs, lists and images are the mainstay of every Web developer’s toolbox. Perhaps the most common tool of all is the anchor. The humble a element is what joins documents together to create the gloriously chaotic collection we call the World Wide Web.
Anatomy of an Anchor
The power of the anchor element lies in the href attribute, short for hypertext reference. This creates a one-way link to another resource, usually another page on the Web:
<a href="http://allinthehead.com/">
The href attribute sits in the opening a tag and some descriptive text sits between the opening and closing tags:
<a href="http://allinthehead.com/">Drew McLellan</a>
“Whoop-dee-freakin’-doo,” I hear you say, “this is pretty basic stuff” – and you’re quite right. But there’s more to the anchor element than just the href attribute.
The Theory of relativity
You might be familiar with the rel attribute from the link element. I bet you’ve got something like this in the head of your documents:
<link rel="stylesheet" type="text/css" media="screen" href="styles.css" />
The rel attribute describes the relationship between the linked document and the current document. In this case, the value of rel is “stylesheet”. This means that the linked document is the stylesheet for the current document: that’s its relationship.
Here’s another common use of rel:
<link rel="alternate" type="application/rss+xml" title="my RSS feed" href="index.xml" />
This describes the relationship of the linked file – an RSS feed – as “alternate”: an alternate view of the current document.
Both of those examples use the link element but you are free to use the rel attribute in regular hyperlinks. Suppose you’re linking to your RSS feed in the body of your page:
Subscribe to <a href="index.xml">my RSS feed</a>.
You can add extra information to this anchor using the rel attribute:
Subscribe to <a href="index.xml" rel="alternate" type="application/rss+xml">my RSS feed</a>.
There’s no prescribed list of values for the rel attribute so you can use whatever you decide is semantically meaningful. Let’s say you’ve got a complex e-commerce application that includes a link to a help file. You can explicitly declare the relationship of the linked file as being “help”:
<a href="help.html" rel="help">need help?</a>
Elemental Microformats
Although it’s completely up to you what values you use for the rel attribute, some consensus is emerging in the form of microformats. Some of the simplest microformats make good use of rel. For example, if you are linking to a license that covers the current document, use the rel-license microformat:
Licensed under a <a href="http://creativecommons.org/licenses/by/2.0/" rel="license">Creative Commons attribution license</a>
That describes the relationship of the linked document as “license.”
The rel-tag microformat goes a little further. It uses rel to describe the final part of the URL of the linked file as a “tag” for the current document:
Learn more about <a href="http://en.wikipedia.org/wiki/Microformats" rel="tag">semantic markup</a>
This states that the current document is being tagged with the value “Microformats.”
XFN, which stands for XHTML Friends Network, is a way of describing relationships between people:
<a href="http://allinthehead.com/" rel="friend">Drew McLellan</a>
This microformat makes use of a very powerful property of the rel attribute. Like the class attribute, rel can take multiple values, separated by spaces:
<a href="http://allinthehead.com/" rel="friend met colleague">Drew McLellan</a>
Here I’m describing Drew as being a friend, someone I’ve met, and a colleague (because we’re both Web monkies).
You Say You Want a revolution
While rel describes the relationship of the linked resource to the current document, the rev attribute describes the reverse relationship: it describes the relationship of the current document to the linked resource. Here’s an example of a link that might appear on help.html:
<a href="shoppingcart.html" rev="help">continue shopping</a>
The rev attribute declares that the current document is “help” for the linked file.
The vote-links microformat makes use of the rev attribute to allow you to qualify your links. By using the value “vote-for” you can describe your document as being an endorsement of the linked resource:
I agree with <a href="http://richarddawkins.net/home" rev="vote-for">Richard Dawkins</a>.
There’s a corresponding vote-against value. This means that you can link to a document but explicitly state that you don’t agree with it.
I agree with <a href="http://richarddawkins.net/home" rev="vote-for">Richard Dawkins</a>
about those <a href="http://www.icr.org/" rev="vote-against">creationists</a>.
Of course there’s nothing to stop you using both rel and rev on the same hyperlink:
<a href="http://richarddawkins.net/home" rev="vote-for" rel="muse">Richard Dawkins</a>
The Wisdom of Crowds
The simplicity of rel and rev belies their power. They allow you to easily add extra semantic richness to your hyperlinks. This creates a bounty that can be harvested by search engines, aggregators and browsers. Make it your New Year’s resolution to make friends with these attributes and extend the power of hypertext. |
2006 |
Jeremy Keith |
jeremykeith |
2006-12-18T00:00:00+00:00 |
https://24ways.org/2006/boost-your-hyperlink-power/ |
code |
| 241 |
Jank-Free Image Loads |
There are a few fundamental problems with embedding images in pages of hypertext; perhaps chief among them is this: text is very light and loads rather fast; images are much heavier and arrive much later. Consequently, millions (billions?) of times a day, a hapless Web surfer will start reading some text on a page, and then —
Your browser doesn’t support HTML5 video. Here is
a link to the video instead.
— oops! — an image pops in above it, pushing said text down the page, and our poor reader loses their place.
By default, partially-loaded pages have the user experience of a slippery fish, or spilled jar of jumping beans. For the rest of this article, I shall call that jarring, no-good jumpiness by its name: jank. And I’ll chart a path into a jank-free future – one in which it’s easy and natural to author <img> elements that load like this:
Your browser doesn’t support HTML5 video. Here is
a link to the video instead.
Jank is a very old problem, and there is a very old solution to it: the width and height attributes on <img>. The idea is: if we stick an image’s dimensions right into the HTML, browsers can know those dimensions before the image loads, and reserve some space on the layout for it so that nothing gets bumped down the page when the image finally arrives.
width
Specifies the intended width of the image in pixels. When given together with the height, this allows user agents to reserve screen space for the image before the image data has arrived over the network.
—The HTML 3.2 Specification, published on January 14 1997
Unfortunately for us, when width and height were first spec’d and implemented, layouts were largely fixed and images were usually only intended to render at their fixed, actual dimensions. When image sizing gets fluid, width and height get weird:
See the Pen fluid width + fixed height = distortion by Eric Portis (@eeeps) on CodePen.
width and height are too rigid for the responsive world. What we need, and have needed for a very long time, is a way to specify fixed aspect ratios, to pair with our fluid widths.
I have good news, bad news, and great news.
The good news is, there are ways to do this, now, that work in every browser. Responsible sites, and responsible developers, go through the effort to do them.
The bad news is that these techniques are all terrible, cumbersome hacks. They’re difficult to remember, difficult to understand, and they can interact with other pieces of CSS in unexpected ways.
So, the great news: there are two on-the-horizon web platform features that are trying to make no-jank, fixed-aspect-ratio, fluid-width images a natural part of the web platform.
aspect-ratio in CSS
The first proposed feature? An aspect-ratio property in CSS!
This would allow us to write CSS like this:
img {
width: 100%;
}
.thumb {
aspect-ratio: 1/1;
}
.hero {
aspect-ratio: 16/9;
}
This’ll work wonders when we need to set aspect ratios for whole classes of images, which are all sized to fit within pre-defined layout slots, like the .thumb and .hero images, above.
Alas, the harder problem, in my experience, is not images with known-ahead-of-time aspect ratios. It’s images – possibly user generated images – that can have any aspect ratio. The really tricky problem is unknown-when-you’re-writing-your-CSS aspect ratios that can vary per-image. Using aspect-ratio to reserve space for images like this requires inline styles:
<img src="image.jpg" style="aspect-ratio: 5/4" />
And inline styles give me the heebie-jeebies! As a web developer of a certain age, I have a tiny man in a blue beanie permanently embedded deep within my hindbrain, who cries out in agony whenever I author a style="" attribute. And you know what? The old man has a point! By sticking super-high-specificity inline styles in my content, I’m cutting off my, (or anyone else’s) ability to change those aspect ratios, for whatever reason, later.
How might we specify aspect ratios at a lower level? How might we give browsers information about an image’s dimensions, without giving them explicit instructions about how to style it?
I’ll tell you: we could give browsers the intrinsic aspect ratio of the image in our HTML, rather than specifying an extrinsic aspect ratio!
A brief note on intrinsic and extrinsic sizing
What do I mean by “intrinsic” and “extrinsic?”
The intrinsic size of an image is, put simply, how big it’d be if you plopped it onto a page and applied no CSS to it whatsoever. An 800×600 image has an intrinsic width of 800px.
The extrinsic size of an image, then, is how large it ends up after CSS has been applied. Stick a width: 300px rule on that same 800×600 image, and its intrinsic size (accessible via the Image.naturalWidth property, in JavaScript) doesn’t change: its intrinsic size is still 800px. But this image now has an extrinsic size (accessible via Image.clientWidth) of 300px.
It surprised me to learn this year that height and width are interpreted as presentational hints and that they end up setting extrinsic dimensions (albeit ones that, unlike inline styles, have absolutely no specificity).
CSS aspect-ratio lets us avoid setting extrinsic heights and widths – and instead lets us give images (or anything else) an extrinsic aspect ratio, so that as soon as we set one dimension (possibly to a fluid width, like 100%!), the other dimension is set automatically in relation to it.
The last tool I’m going to talk about gets us out of the extrinsic sizing game all together — which, I think, is only appropriate for a feature that we’re going to be using in HTML.
intrinsicsize in HTML
The proposed intrinsicsize attribute will let you do this:
<img src="image.jpg" intrinsicsize="800x600" />
That tells the browser, “hey, this image.jpg that I’m using here – I know you haven’t loaded it yet but I’m just going to let you know right away that it’s going to have an intrinsic size of 800×600.” This gives the browser enough information to reserve space on the layout for the image, and ensures that any and all extrinsic sizing instructions, specified in our CSS, will layer cleanly on top of this, the image’s intrinsic size.
You may ask (I did!): wait, what if my <img> references multiple resources, which all have different intrinsic sizes? Well, if you’re using srcset, intrinsicsize is a bit of a misnomer – what the attribute will do then, is specify an intrinsic aspect ratio:
<img
srcset="300x200.jpg 300w,
600x400.jpg 600w,
900x600.jpg 900w,
1200x800.jpg 1200w"
sizes="75vw"
intrinsicsize="3x2" />
In the future (and behind the “Experimental Web Platform Features” flag right now, in Chrome 71+), asking this image for its .naturalWidth would not return 3 – it will return whatever 75vw is, given the current viewport width. And Image.naturalHeight will return that width, divided by the intrinsic aspect ratio: 3/2.
Can’t wait
I seem to have gotten myself into the weeds a bit. Sizing on the web is complicated!
Don’t let all of these details bury the big takeaway here: sometime soon (🤞 2019‽ 🤞), we’ll be able to toss our terrible aspect-ratio hacks into the dustbin of history, get in the habit of setting aspect-ratios in CSS and/or intrinsicsizes in HTML, and surf a less-frustrating, more-performant, less-janky web. I can’t wait! |
2018 |
Eric Portis |
ericportis |
2018-12-21T00:00:00+00:00 |
https://24ways.org/2018/jank-free-image-loads/ |
code |
| 310 |
Fairytale of new Promise |
There are only four good Christmas songs.
I know, yeah, JavaScript or whatever. We’ll get to that in a minute, I promise.
First—and I cannot stress this enough— there are four good Christmas songs. You’re free to disagree with me here, of course, but please try to understand that you will be wrong.
They don’t all have the most safe-for-work titles; I can’t list all of them here, but if you choose to let your fingers do the walkin’ to your nearest search engine, I will say that one was released by the band FEAR way back in 1982 and one was on Run the Jewels’ self-titled debut album. The lyrics are a hell of a lot worse than the titles, so maybe wait until you get home from work before you queue them up. Wear headphones, if you’ve got thin walls.
For my money, though, the two I can reference by name are the top of that small heap: Tom Waits’ Christmas Card from a Hooker in Minneapolis, and The Pogues’ Fairytale of New York. The former once held the honor of being the only good Christmas song—about which which I was also unequivocally correct, right up until I changed my mind. It’s not the song up for discussion today, but feel free to familiarize yourself just the same—I’ll wait.
Fairytale of New York—the top of the list—starts out by hinting at some pretty standard holiday fare; dreams and cheer and whatnot. Typical seasonal stuff, so long as you ignore that the story seems to be recounted as a drunken flashback in a jail cell. You can probably make a few guesses at the underlying spirit of the song based on that framing: following a lucky break, our bright-eyed protagonists move to New York in search of fame and fortune, only to quickly descend into bad decisions, name-calling, and vaguely festive chaos.
This song speaks to me on a couple of levels, not the least of which is as a retelling of my day-to-day interactions with JavaScript. Each day’s melody might vary a little bit, granted, but the lyrics almost always follow a pretty clear arc toward “PARENTAL ADVISORY: EXPLICIT CONTENT.” You might have heard a similar tune yourself; it goes a little somethin’ like setTimeout(function() { console.log( "this should be happening last" ); }, 1000); . Callbacks are calling callbacks calling callbacks and something is happening somewhere, as the JavaScript interpreter plods through our code start-to-finish, line-by-line, step-by-step. If we need to take actions based on the results of something that could take its sweet time resolving, well, we’d better fiddle with the order of things to make sure those actions don’t happen too soon.
“But I can see a better time,” as the song says, “when all our dreams come true.” So, with that Pogues brand of holiday spirit squarely in mind—by which I mean that your humble narrator is almost certainly drunk, and may be incarcerated at the time of publication—gather ’round for a story of hope, of hardships, of semi-asynchronous JavaScript programming, and ultimately: of Promise unfulfilled.
The Main Thread
JavaScript is single-minded, in a manner of speaking. Anything we tell the JavaScript runtime to do goes into a single-file queue; you’ll see it referred to as the “main thread,” or “UI thread.” That thread can be shared by a number of critical browser processes, like rendering and re-rendering parts of the page, and user interactions ranging from the simple—say, highlighting text—to the more complex—interacting with form elements.
If that sounds a little scary to you, well, that’s because it is. The more complex our scripts, the more we’re cramming into that single-file main thread, to be processed along with—say—some of our CSS animations. Too much JavaScript clogging up the main thread means a lot of user-facing performance jankiness. Getting away from that single thread is a big part of all the excitement around Web Workers, which allow us to offload entire scripts into their own dedicated background threads—though not without limitations of their own. Outside of Web Workers, that everything-thread is the only game in town: scripts executed one thing at a time, functions calling functions calling functions, taking numbers and crowding up the same deli counter as a user’s interactions—which, in this already strained metaphor, would be ham, I guess?
Asynchronous JavaScript
Now, those queued actions may include asynchronous things. For example: AJAX callbacks, setTimeout/setInterval, and addEventListener won’t block the main thread while we’re waiting for a request to come back, a timer to tick away, or an event to trigger. Once those things do kick in, though, the actions they’re meant to perform will get shuffled right back into that single-thread queue.
There are a couple of places you might have written asynchronously-fired JavaScript, even if you’re not super familiar with the overarching concept: XMLHttpRequest—“AJAX,” if ya nasty—or just kicking off a function once a user triggers a click or mouseenter event. Event-driven development is writ a little larger, with the overall flow of the script dictated by events, both internal and external. Writing event-driven JavaScript applications is a step in the right direction for sure—it won’t cure what ails the main thread, but it does work with the medium in a reasonable way. Event-driven development allows us to manage our use of the main thread in a way that makes sense. If any of this rings a bell for you, the motivation for Promises should feel familiar.
For example, a custom init event might kick things off, and fire a create event that applies our classes and restructures our markup which, on completion, fires a bindEvents event to handle all the event listeners for user interaction. There might not sound like much difference between that and one big function that kicks off, manipulates the DOM, and binds our events line-by-line—but in a script of sufficient size and complexity we’re not only provided with a decoupled flow through the script, but obvious touchpoints for future updates and a predictable structure for ongoing maintenance.
This pattern falls apart a little where we were still creating, binding, and listening for events in the same top-to-bottom, one-item-at-a-time way—we had to set a listener on a given object before the event fires, or nothing would happen:
// Create the event:
var event = document.createEvent( "Event" );
// Name the event:
event.initEvent( "doTheStuff", true, true );
// Listen for the custom `doTheStuff` event on `window`:
window.addEventListener( "doTheStuff", initializeEverything );
// Fire the custom event
window.dispatchEvent( event );
This example is a little contrived, and this stuff is a lot more manageable for sure with the addition of a framework, but that’s the basic gist: create and name the event, add a listener for the event, and—after setting our listener—dispatch the event.
Events and callbacks aren’t the only game in town for weaving our way in and out of the main thread, though—at least, not anymore.
Promises
A Promise is, at the risk of sounding sentimental, pure potential—an empty container into which a value eventually results. A Promise can exist in several states: “pending,” while the computation they contain is being performed or “resolved” once that computation is complete. Once resolved, a Promise is “fulfilled” if it gave us back something we expect, or “rejected” if it didn’t.
The Promise constructor accepts a callback with two arguments: resolve and reject. We perform an action—asynchronous or otherwise—within that callback. If everything in there has gone according to plan, we call resolve. If something has gone awry, we call reject—with an error, conventionally. To illustrate, let’s tack something together with a pretty decent chance of doing what we don’t want: a promise meant only to give us the number 1, but has a chance of giving us back a 2. No reasonable person would ever do this, of course, but I wouldn’t necessarily put it past me.
var promisedOne = new Promise( function( resolve, reject ) {
var coinToss = Math.floor( Math.random() * 2 ) + 1;
if( coinToss === 1 ) {
resolve( coinToss );
} else {
reject( new Error( "That ain’t a one." ) );
}
});
There’s nothing too surprising in there, after you boil it all down. It’s a little return-y, with the exception that we’re flagging results as “as expected” or “something went wrong.”
Tapping into that Promise uses another new keyword: then—and as someone who attempts to make sense of JavaScript by breaking it down to plain ol’ human-language, I’m a big fan of this syntax. then is tacked onto our Promise identifier, and does just what it says on the tin: once the Promise is resolved, then do one of two things, both supplied as callbacks: the first in the case of a fulfilled promise, and the second in the case of a rejected one. Those two callbacks will have, as arguments, the results we specified with resolve orreject, respectively. It sounds like a lot in prose, but in code it’s a pretty simple pattern:
promisedOne.then( function( result ) {
console.log( result );
}, function( error ) {
console.error( error );
});
If you’ve spent any time working with AJAX—jQuery-wise, in particular—you’ve seen something like this pattern before: a success callback and an error callback. The state of a promise, once fulfilled or rejected, cannot be changed—any reference we make to promisedOne will have a single, fixed result.
It may not look like too much the way I’m using it here, but it’s powerful stuff—a pattern for asynchronously resolving anything. I’ve recently used Promises alongside a script that emulates Font Load Events, to apply webfonts asynchronously and avoid a potential performance hit. Font Face Observer allows us to, as the name implies, determine when the files referenced by our @font-face rules have finished loading.
var fontObserver = new FontFaceObserver( "Fancy Font" );
fontObserver.check().then(function() {
document.documentElement.className += " fonts-loaded";
}, function( error ) {
console.error( error );
});
fontObserver.check() gives us back a Promise, allowing us to chain on a then containing our callbacks for success and failure. We use the fulfilled callback to bolt a class onto the page once the font file has been fully transferred. We don’t bother including an argument in the first function, since we don’t care about the result itself so much as we care that the promise resolved without error—we’re not doing anything with the resolved value, just adding a class to the page. We do include the error argument, since we’ll want to know what happened should something go wrong.
Now, this isn’t the tidiest syntax around—at least to my eyes—with those two functions just kinda floating in a then. Luckily there’s an similar alternative syntax; one that I find a bit easier to parse at-a-glance:
fontObserver.check()
.then(function() {
document.documentElement.className += " fonts-loaded";
})
.catch(function( error ) {
console.log( error );
});
The first callback inside then provides us with our success state, while the catch provides us with a single, explicit “something went wrong” callback. The two syntaxes aren’t completely identical in all situations, but for a simple case like this, I find it a little neater.
The Common Thread
I guess I still owe you an explanation, huh. Not about the JavaScript-whatever; I think I’ve explained that plenty. No, I mean Fairytale of New York, and why it’s perched up there at the top of the four (4) song heap.
Fairytale is a sad song, ostensibly. If you follow the main thread—start to finish, line-by-line, step by step— Fairytale is a sad song. And I can see you out there, visions of Die Hard dancing in your heads: “but is it a Christmas song?”
Well, for my money, nothing says “holidays” quite like unreliable narration.
Shane MacGowan, the song’s author, has placed the first verse about “Christmas Eve in the drunk tank” as happening right after the “lucky one, came in eighteen-to-one”—not at the chronological end of the story. That means the song might not be mostly drunken flashback, but all of it a single, overarching flashback including a Christmas Eve in protective custody. It could be that the man and woman are, together, recounting times long past—good times and bad times—maybe not even in chronological order. Hell, the “NYPD Choir” mentioned in the chorus? There’s no such thing.
We’re not big Christmas folks, my family and I. But just the same, every year, the handful of us get together, and every year—like clockwork—there’s a lull in conversation, there’s a sharp exhale, and Ma says “we all made it.” Not to a house, not to a dinner, but through another year, to another Christmas. At this point, without fail, someone starts telling a story—and one begets another, and so on. Sometimes the stories are happy, sometimes they’re sad, more often than not they’re both. Some are about things we were lucky to walk away from, some are about a time when another one of us didn’t.
Start-to-finish, line-by-line, step-by-step, the main thread through the year doesn’t change, and maybe there isn’t a whole lot we can do to change it. But by carefully weaving our way in and out of that thread—stories all out of sync and resolving one way or the other, with the results determined by questionably reliable narrators—we can change the way we interact with it and, little by little, we can start making sense of it. |
2016 |
Mat Marquis |
matmarquis |
2016-12-19T00:00:00+00:00 |
https://24ways.org/2016/fairytale-of-new-promise/ |
code |
| 36 |
Naming Things |
There are only two hard things in computer science: cache invalidation and naming things.
Phil Karlton
Being a professional web developer means taking responsibility for the code you write and ensuring it is comprehensible to others. Having a documented code style is one means of achieving this, although the size and type of project you’re working on will dictate the conventions used and how rigorously they are enforced.
Working in-house may mean working with multiple developers, perhaps in distributed teams, who are all committing changes – possibly to a significant codebase – at the same time. Left unchecked, this codebase can become unwieldy. Coding conventions ensure everyone can contribute, and help build a product that works as a coherent whole.
Even on smaller projects, perhaps working within an agency or by yourself, at some point the resulting product will need to be handed over to a third party. It’s sensible, therefore, to ensure that your code can be understood by those who’ll eventually take ownership of it.
Put simply, code is read more often than it is written or changed. A consistent and predictable naming scheme can make code easier for other developers to understand, improve and maintain, presumably leaving them free to worry about cache invalidation.
Let’s talk about semantics
Names not only allow us to identify objects, but they can also help us describe the objects being identified.
Semantics (the meaning or interpretation of words) is the cornerstone of standards-based web development. Using appropriate HTML elements allows us to create documents and applications that have implicit structural meaning. Thanks to HTML5, the vocabulary we can choose from has grown even larger.
HTML elements provide one level of meaning: a widely accepted description of a document’s underlying structure. It’s only with the mutual agreement of browser vendors and developers that <p> indicates a paragraph.
Yet (with the exception of widely accepted microdata and microformat schemas) only HTML elements convey any meaning that can be parsed consistently by user agents. While using semantic values for class names is a noble endeavour, they provide no additional information to the visitor of a website; take them away and a document will have exactly the same semantic value.
I didn’t always think this was the case, but the real world has a habit of changing your opinion. Much of my thinking around semantics has been informed by the writing of my peers. In “About HTML semantics and front-end architecture”, Nicholas Gallagher wrote:
The important thing for class name semantics in non-trivial applications is that they be driven by pragmatism and best serve their primary purpose – providing meaningful, flexible, and reusable presentational/behavioural hooks for developers to use.
These thoughts are echoed by Harry Roberts in his CSS Guidelines:
The debate surrounding semantics has raged for years, but it is important that we adopt a more pragmatic, sensible approach to naming things in order to work more efficiently and effectively. Instead of focussing on ‘semantics’, look more closely at sensibility and longevity – choose names based on ease of maintenance, not for their perceived meaning.
Naming methodologies
Front-end development has undergone a revolution in recent years. As the projects we’ve worked on have grown larger and more important, our development practices have matured. The pros and cons of object-orientated approaches to CSS can be endlessly debated, yet their introduction has highlighted the usefulness of having documented naming schemes.
Jonathan Snook’s SMACSS (Scalable and Modular Architecture for CSS) collects style rules into five categories: base, layout, module, state and theme. This grouping makes it clear what each rule does, and is aided by a naming convention:
By separating rules into the five categories, naming convention is beneficial for immediately understanding which category a particular style belongs to and its role within the overall scope of the page. On large projects, it is more likely to have styles broken up across multiple files. In these cases, naming convention also makes it easier to find which file a style belongs to.
I like to use a prefix to differentiate between layout, state and module rules. For layout, I use l- but layout- would work just as well. Using prefixes like grid- also provide enough clarity to separate layout styles from other styles. For state rules, I like is- as in is-hidden or is-collapsed. This helps describe things in a very readable way.
SMACSS is more a set of suggestions than a rigid framework, so its ideas can be incorporated into your own practice. Nicholas Gallagher’s SUIT CSS project is far more strict in its naming conventions:
SUIT CSS relies on structured class names and meaningful hyphens (i.e., not using hyphens merely to separate words). This helps to work around the current limits of applying CSS to the DOM (i.e., the lack of style encapsulation), and to better communicate the relationships between classes.
Over the last year, I’ve favoured a BEM-inspired approach to CSS. BEM stands for block, element, modifier, which describes the three types of rule that contribute to the style of a single component. This means that, given the following markup:
<ul class=“sleigh”>
<li class=“sleigh__reindeer sleigh__reindeer––famous”>Rudolph</li>
<li class=“sleigh__reindeer”>Dasher</li>
<li class=“sleigh__reindeer”>Dancer</li>
<li class=“sleigh__reindeer”>Prancer</li>
<li class=“sleigh__reindeer”>Vixen</li>
<li class=“sleigh__reindeer”>Comet</li>
<li class=“sleigh__reindeer”>Cupid</li>
<li class=“sleigh__reindeer”>Dunder</li>
<li class=“sleigh__reindeer”>Blixem</li>
</ul>
I know that:
.sleigh is a containing block or component.
.sleigh__reindeer is used only as a descendent element of .sleigh.
.sleigh__reindeer––famous is used only as a modifier of .sleigh__reindeer.
With this naming scheme in place, I know which styles relate to a particular component, and which are shared. Beyond reducing specificity-related head-scratching, this approach has given me a framework within which I can consistently label items, and has sped up my workflow considerably.
Each of these methodologies shows that any robust CSS naming convention will have clear rules around case (lowercase, camelCase, PascalCase) and the use of special (allowed) characters like hyphens and underscores.
What makes for a good name?
Regardless of higher-level conventions, there’s no getting away from the fact that, at some point, we’re still going to have to name things. Recognising that classes should be named with other developers in mind, what makes for a good name?
Understandable
The most important aspect is for a name to be understandable. Words used in your project may come from a variety of sources: some may be widely understood, and others only be recognised by people working within a particular environment.
Culture
Most words you’ll choose will have common currency outside the world of web development, although they may have a particular interpretation among developers (think menu, list, input). However, words may have a narrower cultural significance; for example, in Germany and other German-speaking countries, impressum is the term used for legally mandated statements of ownership.
Industry
Industries often use specific terms to describe common business practices and concepts. Publishing has a number of these (headline, standfirst, masthead, colophon…) all have well understood meanings – and not all of them are relevant to online usage.
Organisation
Companies may have internal names (or nicknames) for their products and services. The Guardian is rife with such names: bisons (and buffalos), pixies (and super-pixies), bentos (and mini-bentos)… all of which mean something very different outside the organisation. Although such names can be useful inside smaller teams, in larger organisations they can become a barrier to entry, a sort of secret code used among employees who have been around long enough to know what they mean.
Product
Your team will undoubtedly have created names for specific features or interface components used in your product. For example, at Clearleft we coined the term gravigation for a navigation bar that was pinned to the bottom of the viewport. Elements of a visual design language may have names, too. Transport for London’s bar and circle logo is known internally as the roundel, while Nike’s logo is called the swoosh. Branding agencies often christen colours within a brand palette, too, either to evoke aspects of the identity or to indicate intended usage.
Once you recognise the origin of the words you use, you’ll be better able to judge their appropriateness. Using Latin words for class names may satisfy a need to use semantic-sounding terms but, unless you work in a company whose employees have a basic grasp of Latin, a degree of translation will be required. Military ranks might be a clever way of declaring sizes without implying actual values, but I’d venture most people outside the armed forces don’t know how they’re ordered.
Obvious
Quite often, the first name that comes into your head will be the best option. Names that obliquely reference the function of a class (e.g. receptacle instead of container, kevlar instead of no-bullets) only serve to add an additional layer of abstraction. Don’t overthink it!
One way of knowing if the names you use are well understood is to look at what similar concepts are called in existing vocabularies. schema.org, Dublin Core and the BBC’s ontologies are all useful sources for object names.
Functional
While we’ve learned to avoid using presentational classes, there remains a tension between naming things based on their content, and naming them for their intended presentation or behaviour (which may change at different breakpoints). Rather than think about a component’s appearance or behaviour, instead look to its function, its purpose. To clarify, ask what a component’s function is, and not how the component functions.
For example, the Guardian’s internal content system uses the following names for different types of image placement: supporting, showcase and thumbnail, with inline being the default. These options make no promise of the resulting position on a webpage (or smartphone app, or television screen…), but do suggest intended use, and therefore imply the likely presentation.
Consistent
Being consistent in your approach to names will allow for easier naming of successive components, and extending the vocabulary when necessary. For example, a predictably named hierarchy might use names like primary and secondary. Should another level need to be added, tertiary is clearly be preferred over third.
Appropriate
Your project will feature a mix of style rules. Some will perform utility functions (clearing floats, removing bullets from a list, reseting margins), while others will perform specific functions used only once or twice in a project. Names should reflect this. For commonly used classes, be generic; for unique components be more specific.
It’s also worth remembering that you can use multiple classes on an element, so combining both generic and specific can give you a powerful modular design system:
Generic: list
Specific: naughty-children
Combined: naughty-children list
If following the BEM methodology, you might use the following classes:
Generic: list
Specific: list––nice-children
Combined: list list––nice-children
Extensible
Good naming schemes can be extended. One way of achieving this is to use namespaces, which are basically a way of grouping related names under a higher-level term.
Microformats are a good example of a well-designed naming scheme, with many of its vocabularies taking property names from existing and related specifications (e.g. hCard is a 1:1 representation of vCard). Microformats 2 goes one step further by grouping properties under several namespaces:
h-* for root class names (e.g. h-card)
p-* for simple (text) properties (e.g. p-name)
u-* for URL properties (e.g. u-photo)
dt-* for date/time properties (e.g. dt-bday)
e-* for embedded markup properties (e.g. e-note)
The inclusion of namespaces is a massive improvement over the earlier specification, but the downside is that microformats now occupy five separate namespaces. This might be problematic if you are using u-* for your utility classes. While nothing will break, your naming system won’t be as robust, so plan accordingly.
(Note: Microformats perform a very specific function, separate from any presentational concerns. It’s therefore considered best practice to not use microformat classes as styling hooks, but instead use additional classes that relate to the function of the component and adhere to your own naming conventions.)
Short
Names should be as long as required, but no longer. When looking for words to describe a particular function, I try to look for single words where possible. Avoid abbreviations unless they are understood within the contexts described above. rrp is fine if labelling a recommended retail price in an online shop, but not very helpful if used to mean ragged-right paragraph, for example.
Fun!
Finally, names can be an opportunity to have some fun! Names can give character to a project, be it by providing an outlet for in-jokes or adding little easter eggs for those inclined to look.
The copyright statement on Apple’s website has long been named sosumi, a word that has a nice little history inside Apple. Until recently, the hamburger menu icon on the Guardian website was labelled honest-burger, after the developer’s favourite burger restaurant.
A few thoughts on preprocessors
CSS preprocessors have solved a lot of problems, but they have an unfortunate downside: they require you to name yet more things! Whereas we needed to worry only about style rules, now we need names for variables, mixins, functions… oh my!
A second article could be written about naming these, so for now I’ll offer just a few thoughts. The first is to note that preprocessors make it easier to change things, as they allow for DRYer code. So while the names of variables are important (and the advice in this article still very much applies), you can afford to relax a little.
Looking to name colour variables? If possible, find out if colours have been assigned names in a brand palette. If not, use obvious names (based on appearance or function, depending on your preference) and adapt as the palette grows. If it becomes difficult to name colours that are too similar, I’d venture that the problem lies with the design rather than the naming scheme.
The same is true for responsive breakpoints. Preprocessors allow you to move awkward naming conventions out of the markup and into the CSS. Although terms like mobile, tablet and desktop are not desirable given the need to think about device-agnostic design, if these terms are widely understood within a product team and among stakeholders, using them will ensure everyone is using the same language (they can always be changed later).
It still feels like we’re at the very beginning of understanding how preprocessors fit into a development workflow, if at all! I suspect over the next few years, best practices will emerge for all of these considerations. In the meantime, use your brain!
Even with sensible rules and conventions in place, naming things can remain difficult, but hopefully I’ve made this exercise a little less painful. Christmas is a time of giving, so to the developer reading your code in a year’s time, why not make your gift one of clearer class names. |
2014 |
Paul Lloyd |
paulrobertlloyd |
2014-12-21T00:00:00+00:00 |
https://24ways.org/2014/naming-things/ |
code |
| 216 |
Styling Components - Typed CSS With Stylable |
There’s been a lot of debate recently about how best to style components for web apps so that styles don’t accidentally ‘leak’ out of the component they’re meant for, or clash with other styles on the page.
Elaborate CSS conventions have sprung up, such as OOCSS, SMACSS, BEM, ITCSS, and ECSS. These work well, but they are methodologies, and require everyone in the team to know them and follow them, which can be a difficult undertaking across large or distributed teams.
Others just give up on CSS and put all their styles in JavaScript. Now, I’m not bashing JS, especially so close to its 22nd birthday, but CSS-in-JS has problems of its own. Browsers have 20 years experience in optimising their CSS engines, so JavaScript won’t be as fast as using real CSS, and in any case, this requires waiting for JS to download, parse, execute then render the styles.
There’s another problem with CSS-in-JS, too. Since Responsive Web Design hit the streets, most designers no longer make comps in Photoshop or its equivalents; instead, they write CSS. Why hire an expensive design professional and require them to learn a new way of doing their job?
A recent thread on Twitter asked “What’s your biggest gripe with CSS-in-JS?”, and the replies were illuminating: “Always having to remember to camelCase properties then spending 10min pulling hair out when you do forget”, “the cryptic domain-specific languages that each of the frameworks do just ever so slightly differently”, “When I test look and feel in browser, then I copy paste from inspector, only to have to re-write it as a JSON object”, “Lack of linting, autocomplete, and css plug-ins for colors/ incrementing/ etc”.
If you’re a developer, and you’re still unconvinced, I challenge you to let designers change the font in your IDE to Zapf Chancery and choose a new colour scheme, simply because they like it better. Does that sound like fun? Will that boost your productivity? Thought not.
Some chums at Wix Engineering and I wanted to see if we could square this circle. Wix-hosted sites have always used CSS-in-JS (the concept isn’t new; it was in Netscape 4!) but that was causing performance problems. Could we somehow devise a method of extending CSS (like SASS and LESS do) that gives us styles that are guaranteed not to leak or clash, that is compatible with code editors’ autocompletion, and which could be pre-processed at build time to valid, cross-browser, static CSS?
After a few months and a few proofs of concept later (drumroll), yes – we could! We call it Stylable.
Introducing Stylable
Stylable is a CSS pre-processor, like SASS or LESS. It uses CSS syntax so all your development tools will work. At build time, the Stylable CSS extensions are transpiled to flat, valid, cross-browser vanilla CSS for maximum performance. There’s quite a bit to it, and this is a short article, so let’s look at the basic concepts.
Components all the way down
Stylable is designed for component-based systems. Imagine you have a Gallery component. Within that, there is a Navigation component (for example, containing a ‘next’, ‘previous’, ‘show all thumbnails’, and ‘show all albums’ controls), and within that there are NavButton components. Each component is discrete, used elsewhere in the system in different contexts, perhaps maintained by different team members or even different organisations — you can use Stylable to add a typed interface to non-Stylable component libraries, as well as using it to build an app from scratch.
Firstly, Stylable will automatically namespace styles so they only apply inside that component, by rewriting them at build time with a unique (but human-readable) prefix. So, for example,
<div className="jingle bells" /> might be re-written as <div class="header183--jingle header183--bells"></div>.
So far, so BEM-like (albeit without the headache of remembering a convention). But what else can it do?
Custom pseudo-elements
An important feature of Stylable is the ability to reach into a component and style it from the outside, without having to know about its internal structure. Let’s see the guts of a simple JSX button component in the file button.jsx:
render () {
return (
<button>
<span className="icon" />
<span className="label">Submit</span>
</button>
);
}
(Note:className is the JSX way of setting a class on an element; this example uses React, but Stylable itself is framework-agnostic.)
I style it using a Stylable stylesheet (the .st.css suffix tells the preprocessor to process this file):
/* button.st.css */
/* note that the root class is automatically placed on the root HTML
element by Stylable React integration */
.root {
background: #b0e0e6;
}
.icon {
display: block;
height: 2em;
background-image: url('./assets/btnIcon.svg');
}
.label {
font-size: 1.2em;
color: rgba(81, 12, 68, 1.0);
}
Note that Stylable allows all the CSS that you know and love to be included. As Drew Powers wrote in his review:
with Stylable, you get CSS, and every part of CSS. This seems like a “duh” observation, but this is significant if you’ve ever battled with a CSS-in-JS framework over a lost or “hacky” implementation of a basic CSS feature.
I can import my Button component into another component - this time, panel.jsx:
/* panel.jsx */
import * as React from 'react';
import {properties, stylable} from 'wix-react-tools';
import {Button} from '../button';
import style from './panel.st.css';
export const Panel = stylable(style)(() => (
<div>
<Button className="cancelBtn" />
</div>
));
In panel.st.css:
/* panel.st.css */
:import {
-st-from: './button.st.css';
-st-default: Button;
}
/* cancelBtn is of type Button */
.cancelBtn {
-st-extends: Button;
background: cornflowerblue;
}
/* targets the label of <Button className="cancelBtn" /> */
.cancelBtn::label {
color: honeydew;
font-weight: bold;
}
Here, we’re reaching into the Button component from the Panel component. Buttons that are not inside a Panel won’t be affected.
We do this by extending the CSS concept of pseudo-elements. As MDN says “A CSS pseudo-element is a keyword added to a selector that lets you style a specific part of the selected element(s)”. We don’t use a descendant selector because the label isn’t part of the Panel component, it’s part of the Button component.
This syntax allows us three important features:
Piercing the Shadow Boundary
Because, like a Matroshka doll of code, you can have components inside components inside components, you can chain pseudo-elements. In Stylable, Gallery::NavigationPanel::Button::Icon is a legitimate selector. We were worried by this (even though all Stylable CSS is transpiled to flat, valid CSS) because it’s not allowed in CSS, albeit with the note “A future version of this specification may allow multiple pseudo-elements per selector”. So I asked the CSS Working Group and was told “we intend to only allow specific combinations”, so we feel this extension to CSS is in the spirit of the language.
While we’re on the subject of those pesky Web Standards, note that the proposed ::part and ::theme pseudo-elements are meant to fulfil the same function. However, those are coming in two years (YouTube link) and, when they do, Stylable will support them.
Structure-agnostic
The second totez-groovy™ feature of Stylable’s pseudo-element syntax is that you don’t have to care about the internal structure of the component whose boundary you’re piercing. Any element with a class attribute is exposed as a pseudo-element to any component that imports it. It acts as an interface on any component, whether written in-house or by a third party.
Code completion
When we started writing Stylable, our objective was to do for CSS what TypeScript does for JavaScript. Wikipedia says
Challenges with dealing with complex JavaScript code led to demand for custom tooling to ease developing of components in the language. TypeScript developers sought a solution that would not break compatibility with the standard and its cross-platform support … [with] static typing that enables static language analysis, which facilitates tooling and IDE support.
Similarly, because Stylable knows about components, their stylable parts and states, and how they inter-relate, we can develop language services like code completion and validation. That means we can see our errors at build time or even while working in our IDE. Wave goodbye to silent run-time breakage misery, with the Stylable Intelligence VS Code extension !
An action replay of Visual Studio Code offering code completion etc, filmed in super StyloVision.
Pseudo-classes for state
Stylable makes it easy to apply styles to custom states (as well as the usual :active, :checked, :visited etc) by extending the CSS pseudo-class syntax.
We do this by declaring the possible custom states on the component:
/* Gallery.st.css */
.root {
-st-states: toggled, loading;
}
.root:toggled {
color: red;
}
.root:loading {
color: green;
}
.root:loading:toggled {
color: blue;
}
The -st-states “property” is actually a directive for the transpiler, so Stylable knows about possible pseudo-elements and can offer code completion etc. It looks like a vendor prefix by design, because it’s therefore valid CSS syntax and IDEs won’t flag it as an error, but is removed at build time. Remember, Stylable resolves to flat, valid, cross-browser CSS.
As with plain CSS, it can’t set a state, but can only react to states set externally. In the case of custom pseudo-classes, your JavaScript logic is responsible for maintaining state — by default, by setting a data-* attribute.
And there’s more!
Hopefully, I’ve shown you how Stylable extends CSS to allow you to style components and sub-components without worrying about that styles will leak, or knowing too much about internal structure. There isn’t time to tell you about mixins (CSS macros in JavaScript), variables or our theming capabilities, because I have wine to wrap and presents to mull.
We made Stylable because we ♥ CSS. But there’s a practical reason, too. As James Kyle, a core team member of Yarn, Babel and TC39 (the JavaScript Standards Technical Committee), said of Styable “pretty sure all the CSS-in-JS libraries just died for me”,
explaining
CSS could be perfectly static if given the right tools, that’s exactly what stylable does. It gives you the tools you need in CSS so that you don’t need to do a bunch of dynamic shit in JS.
Making it static is a huge performance win.
Wix is currently battle-testing Stylable in its back-office systems, before rolling it out to power Wix-hosted sites to make them more performant. There are 110 million Wix-hosted sites, so there will be a lot of Stylable on the web in a few months. And it’s open-sourced so you, dear Reader, can try it out and use it too. There’s a Stylable boilerplate based on create-react-app to get you started (more integrations are in the pipeline).
Happy Hols ‘n’ Hugz from the Stylable team: Bruce, Arnon, Tom, Ido.
Read more
Stylable documentation centre
Stylable on Twitter
A nice picture of a hedgehog |
2017 |
Bruce Lawson |
brucelawson |
2017-12-09T00:00:00+00:00 |
https://24ways.org/2017/styling-components-typed-css-with-stylable/ |
code |
| 314 |
Easy Ajax with Prototype |
There’s little more impressive on the web today than a appropriate touch of Ajax. Used well, Ajax brings a web interface much closer to the experience of a desktop app, and can turn a bear of an task into a pleasurable activity.
But it’s really hard, right? It involves all the nasty JavaScript that no one ever does often enough to get really good at, and the browser support is patchy, and urgh it’s just so much damn effort. Well, the good news is that – ta-da – it doesn’t have to be a headache. But man does it still look impressive. Here’s how to amaze your friends.
Introducing prototype.js
Prototype is a JavaScript framework by Sam Stephenson designed to help make developing dynamic web apps a whole lot easier. In basic terms, it’s a JavaScript file which you link into your page that then enables you to do cool stuff.
There’s loads of capability built in, a portion of which covers our beloved Ajax. The whole thing is freely distributable under an MIT-style license, so it’s good to go. What a nice man that Mr Stephenson is – friends, let us raise a hearty cup of mulled wine to his good name. Cheers! sluurrrrp.
First step is to download the latest Prototype and put it somewhere safe. I suggest underneath the Christmas tree.
Cutting to the chase
Before I go on and set up an example of how to use this, let’s just get to the crux. Here’s how Prototype enables you to make a simple Ajax call and dump the results back to the page:
var url = 'myscript.php';
var pars = 'foo=bar';
var target = 'output-div';
var myAjax = new Ajax.Updater(target, url, {method: 'get', parameters: pars});
This snippet of JavaScript does a GET to myscript.php, with the parameter foo=bar, and when a result is returned, it places it inside the element with the ID output-div on your page.
Knocking up a basic example
So to get this show on the road, there are three files we need to set up in our site alongside prototype.js. Obviously we need a basic HTML page with prototype.js linked in. This is the page the user interacts with. Secondly, we need our own JavaScript file for the glue between the interface and the stuff Prototype is doing. Lastly, we need the page (a PHP script in my case) that the Ajax is going to make its call too.
So, to that basic HTML page for the user to interact with. Here’s one I found whilst out carol singing:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<title>Easy Ajax</title>
<script type="text/javascript" src="prototype.js"></script>
<script type="text/javascript" src="ajax.js"></script>
</head>
<body>
<form method="get" action="greeting.php" id="greeting-form">
<div>
<label for="greeting-name">Enter your name:</label>
<input id="greeting-name" type="text" />
<input id="greeting-submit" type="submit" value="Greet me!" />
</div>
<div id="greeting"></div>
</form>
</body>
</html>
As you can see, I’ve linked in prototype.js, and also a file called ajax.js, which is where we’ll be putting our glue. (Careful where you leave your glue, kids.)
Our basic example is just going to take a name and then echo it back in the form of a seasonal greeting. There’s a form with an input field for a name, and crucially a DIV (greeting) for the result of our call. You’ll also notice that the form has a submit button – this is so that it can function as a regular form when no JavaScript is available. It’s important not to get carried away and forget the basics of accessibility.
Meanwhile, back at the server
So we need a script at the server which is going to take input from the Ajax call and return some output. This is normally where you’d hook into a database and do whatever transaction you need to before returning a result. To keep this as simple as possible, all this example here will do is take the name the user has given and add it to a greeting message. Not exactly Web 2-point-HoHoHo, but there you have it.
Here’s a quick PHP script – greeting.php – that Santa brought me early.
<?php
$the_name = htmlspecialchars($_GET['greeting-name']);
echo "<p>Season's Greetings, $the_name!</p>";
?>
You’ll perhaps want to do something a little more complex within your own projects. Just sayin’.
Gluing it all together
Inside our ajax.js file, we need to hook this all together. We’re going to take advantage of some of the handy listener routines and such that Prototype also makes available. The first task is to attach a listener to set the scene once the window has loaded. He’s how we attach an onload event to the window object and get it to call a function named init():
Event.observe(window, 'load', init, false);
Now we create our init() function to do our evil bidding. Its first job of the day is to hide the submit button for those with JavaScript enabled. After that, it attaches a listener to watch for the user typing in the name field.
function init(){
$('greeting-submit').style.display = 'none';
Event.observe('greeting-name', 'keyup', greet, false);
}
As you can see, this is going to make a call to a function called greet() onkeyup in the greeting-name field. That function looks like this:
function greet(){
var url = 'greeting.php';
var pars = 'greeting-name='+escape($F('greeting-name'));
var target = 'greeting';
var myAjax = new Ajax.Updater(target, url, {method: 'get', parameters: pars});
}
The key points to note here are that any user input needs to be escaped before putting into the parameters so that it’s URL-ready. The target is the ID of the element on the page (a DIV in our case) which will be the recipient of the output from the Ajax call.
That’s it
No, seriously. That’s everything. Try the example. Amaze your friends with your 1337 Ajax sk1llz. |
2005 |
Drew McLellan |
drewmclellan |
2005-12-01T00:00:00+00:00 |
https://24ways.org/2005/easy-ajax-with-prototype/ |
code |
| 295 |
Internet of Stranger Things |
This year I’ve been running a workshop about using JavaScript and Node.js to work with all different kinds of electronics on the Raspberry Pi. So especially for 24 ways I’m going to show you how I made a very special Raspberry Pi based internet connected project! And nothing says Christmas quite like a set of fairy lights connected to another dimension1.
What you’ll see
You can rig up the fairy lights in your home, with the scrawly letters written under each one. The people from the other side (i.e. the internet) will be able to write messages to you from their browser in real time. In fact why not try it now; check this web page. When you click the lights in your browser, my lights (and yours) will turn on and off in real life! (There may be a queue if there are lots of people accessing it, hit the “Send a message” button and wait your turn.)
It’s all done with JavaScript, using Node.js running on both the Raspberry Pi and on the server. I’m using WebSockets to communicate in real time between the browser, server and Raspberry Pi.
What you’ll need
Raspberry Pi any of the following models: Zero (will need straight male header pins soldered2 and Micro USB OTG adaptor), A+, B+, 2, or 3
Micro SD card at least 4Gb Class 10 speed3
Micro USB power supply at least 2A
USB Wifi dongle (unless you have a Pi 3 - that has wifi built in).
Addressable fairy lights
Logic level shifter (with pins soldered unless you want to do it!)
Breadboard
Jumper wires (3x male to male and 4x female to male)
Optional but recommended
Base board to hold the Pi and Breadboard (often comes with a breadboard!)
Find links for where to buy all of these items that goes along with this tutorial. The total price should be around $1004.
Setting up the Raspberry Pi
You’ll need to install the SD card for the Raspberry Pi. You’ll find a link to download a disk image on the support document, ready-made with the Raspbian version of Linux, along with Node.js and all the files you need. Download it and write it to the SD card using the fantastic free software Etcher5.
Next up you have to configure the wifi details on the SD card. If you plug the card into your computer you should see a drive called BOOT. There’s a text file on there called wpa_supplicant.conf. Open it up in your favourite text editor and replace mywifi and mypassword with your wifi details6.
network={
ssid="mywifi"
psk="mypassword"
}
Save the file, eject the card from your computer and plug it into the Raspberry Pi.
If you have a base board or holder for the Raspberry Pi, attach it now. Then connect the wifi USB dongle7 and power supply, but don’t plug it in yet!
Wiring!
Time to wire everything up!
First of all, push the Logic Level Converter into the middle of the breadboard:
Logic Level Converter
The logic level converter may be labelled differently from the one in the diagram but the pins are usually exactly the same internally. I would just make sure the pins marked HV (High Voltage) are on the bottom and LV (Low Voltage) are on the top.
Raspberry Pi pins only output 3.3v but the lights need 5v. That’s why we need the logic level converter in there to boost up the signal.
Connect the first two wires between the Raspberry Pi pins and the breadboard:
Note that the pins on the Raspberry Pi are male, so you need a female to male jumper wire to connect between them and the breadboard. The colours don’t have to match but it’s easier to follow (and check) if you use the same ones as in the diagram.
Then the next two:
This is what you should have so far:
Lights
Now to connect the lights! My ones have a connector with three holes in it that I can push jumper wires into, and hopefully yours will too! So I used the male-to-male jumper wires to connect them to the breadboard.
Make sure that you connect the right end of the lights, mine has a male connector at the wrong end so it’s impossible to do this, but double check.
Also make sure that the holes in the light connector are the same as mine. To do this, follow the wires from the connector to the first light and look at the circuit board inside. You should just about be able to make out the connections labelled + (sometimes 5V, V+ or VCC), GND (or ‘-’ or G) and DI (sometimes DIN for data in).
You can just about make out the +, DI and GND on this picture. Note that on the other side of the board there is a DO for data out - that’s what takes the data along to the chip in the next light. Make sure that you’re plugging into the data-in and not the data-out!
That’s it! Everything’s plugged in and ready to go! But before you plug power into your Pi, double check all your wires and make sure they’re exactly right! You could damage your Raspberry Pi if it is not wired correctly. So triple check!
The Moment of Truth!
Plug in the Raspberry Pi and wait around a minute or two for it to boot up. If all is well, the lights should strobe rainbow colours for one second - that’s your confirmation that it’s connected to my WebSocket server and ready to receive messages from the upside-down!
However, if the first light in the string is pulsing red, it means that you’re not connected to the internet. So check the Troubleshooting section of the support document. If it’s pulsing green then you’re connected to the internet but can’t connect to my server. It must have gone down. Sorry! The code will keep trying so leave it running and maybe it’ll come back up.
Rig up the lights!
Fix the lights up on the wall however you want, pins, nails, tape. I’ve used cable clips. Just be careful! I’m using a 50 light string so I’ve programmed it to use the lights at the end for the letters. That way I have just under half the string to extend down to the floor where I can keep the Raspberry Pi.
Check the photo here to see how the lights line up, note that there are spare unused lights in-between each row:
Now visit lights.seb.ly and you’ll see this :
If you’re the only one online you’ll have direct connection to the lights and any letter you click on will light up both in the browser and in real life. If there are other people there, you’ll need to click the button to join the queue and wait your turn.
How it works - the geeky details!
Electronics:
The pins on the Raspberry Pi are known as GPIO pins, general-purpose input/output. You can connect a wide variety of electronic components to them, LED lights, buttons, switches, and sensors. You can turn the power to the pins on and off using Node.js (or Python, if you prefer).
Addressable LEDs or “Neopixels”
We’re only using one GPIO pin on the Raspberry Pi (the other connections are 5V, 3.3V and ground) and that single pin is controlling all of the lights in the string. The code turns the pin on and off really fast in strictly timed morse-code-like dots and dashes to transmit binary data. The chips attached to each LED decode the binary and adjust the output to the LED accordingly. That chip then sends the data on to the next light in the string.
The chips on each light are the WS2811, part of the WS281x family that come in a multitude of different form factors and are often packaged with tiny LEDs in a single component. They are commonly referred to as Neopixels8 and I used them on my Laser Light Synths project.
Neopixels with the chip and the LED all in one - it’s the white square shaped component and the darker square inside is the chip. These are only 5mm wide!
A Laser Light Synth! Covered with around 800 super bright neopixels!
Logic Level Converter
The logic level converter is a really cheap and easy way to change the level from 3.3v to 5v and back again. You must be careful that you do not connect 5v into a GPIO pin or you will most likely damage the Raspberry Pi processor chip.
Power
Neopixels can often draw a lot of current so you need to be careful how you power them. I’ve measured the current draw from the string to be less than 800mA so you should be fine wired directly to the 5V output. But if you use more lights or have them all on really bright at once, you’ll need to use a separate 5V power supply. If you want to learn more, check out Adafruit’s Neopixel Uberguide.
Node.js
There are two Node.js apps running here, one on the Raspberry Pi and one on my server. You can see the code on my GitHub at github.com/sebleedelisle/stranger-lights for the Raspberry Pi and github.com/sebleedelisle/stranger-lights-server for the server. And they’re hosted on npm as stranger-lights and stranger-lights-server.
The server side code sets up a standard web server to deliver the HTML for the web interface. It also sets up a WebSocket server that allows for real-time communication between the browser and the server. This server code also manages the queue and who is in control of the lights at any given time.
WebSockets
I’m using the excellent Socket.io library to manage the WebSocket connection. Both the browser and the Raspberry Pi Node.js app connects to my WebSocket server.
When you click on a letter in the browser, a message is sent to the server, which forwards it to the connected Raspberry Pi clients and also all the web browsers9.
The Raspberry Pi code
The Node.js app runs automatically on startup, and I made this happen by adding this to the /etc/rc.local file:
node /home/pi/strangerthings/client.js > /dev/null &
Anything in the rc.local file gets executed when the Pi boots up and this line of code runs the Node.js app and routes its output to nowhere (ie /dev/null). The & means that it runs it in the background and doesn’t hold up the boot process.
Working with the Raspberry Pi headless
You might know that when a computer has no screen or keyboard, you would refer to it as “running headless”. So just like most web servers, you need to configure it over the network with ssh10. If you’re on a mac you can find your Pi on the network through the name raspberrypi.local11, otherwise you’ll need to find its IP address. There’s more on the guide to Remote Access instructions on the Raspberry Pi website. And if you’re very new to the terminal, I highly recommend this great online Linux command line tutorial.
Improvements
This is quite an early experiment and I’m sure I’ll discover lots of optimisations over the next few weeks, especially if the server gets a proper hammering today! But there are a few things you can do. Obviously I’ve just rigged up my lights with Post-it notes. It’d be a lot nicer to get a paint brush and try to recreate the Winona-in-a-manic-state text style.
Where next?
Finding quality resources about Node.js for electronics on the Pi can be somewhat hit and miss, but this is getting better all the time. Alternatively I am thinking about running some online courses, please let me know if that’s something you’d be interested in, or sign up to my mailing list at st4i.com.
There are many many more resources for the Raspberry Pi with Python (gpiozero is a good place to start), so if that language works for you, you’ll be spoilt for choice!
Also take a look at Arduino - it’s an incredibly popular platform for electronics and the internet is literally bursting with resources.
I hope you enjoyed this little foray into the world of JavaScript electronics on the Raspberry Pi! If you get this working at home please let me know! Tweet me at @seb_ly.
Not a particularly original idea, but I don’t think I’ve seen anyone do it quite like this before, ie using WebSockets, and Node.js on a Raspberry Pi. Other examples: Internet of Stranger Things, Strangerlights.com, and loads of examples on Instructables ↩︎
Video guide to soldering pins on to a Pi Zero and further soldering advice from Adafruit ↩︎
Slower cards will work but performance may suffer ↩︎
Or £5,000 in UK money. Sorry, Brexit joke :) ↩︎
You will need a card reader on your computer - most micro SD cards come with an adaptor that fits standard SD slots. ↩︎
SSID and password should be all that you need but you can see all the config options on this wpa supplicant guide ↩︎
Raspberry Pi Zero will require the OTG to USB adaptor to attach the wifi dongle ↩︎
Thanks to Adafruit who invented the term neopixels so we don’t have to refer to them as WS281x any more! ↩︎
So you can see other people sending messages in the browser ↩︎
ssh is short for Secure Shell and is a way to connect to a remote computer and type in it just like you would in the terminal. ↩︎
You can change this default hostname using raspi-config ↩︎ |
2016 |
Seb Lee-Delisle |
sebleedelisle |
2016-12-01T00:00:00+00:00 |
https://24ways.org/2016/internet-of-stranger-things/ |
code |
| 52 |
Git Rebasing: An Elfin Workshop Workflow |
This year Santa’s helpers have been tasked with making a garland. It’s a pretty simple task: string beads onto yarn in a specific order. When the garland reaches a specific length, add it to the main workshop garland. Each elf has a specific sequence they’re supposed to chain, which is given to them via a work order. (This is starting to sound like one of those horrible calculus problems. I promise it isn’t. It’s worse; it’s about Git.)
For the most part, the system works really well. The elves are able to quickly build up a shared chain because each elf specialises on their own bit of garland, and then links the garland together. Because of this they’re able to work independently, but towards the common goal of making a beautiful garland.
At first the elves are really careful with each bead they put onto the garland. They check with one another before merging their work, and review each new link carefully. As time crunches on, the elves pour a little more cheer into the eggnog cooler, and the quality of work starts to degrade. Tensions rise as mistakes are made and unkind words are said. The elves quickly realise they’re going to need a system to change the beads out when mistakes are made in the chain.
The first common mistake is not looking to see what the latest chain is that’s been added to the main garland. The garland is huge, and it sits on a roll in one of the corners of the workshop. It’s a big workshop, so it is incredibly impractical to walk all the way to the roll to check what the last link is on the chain. The elves, being magical, have set up a monitoring system that allows them to keep a local copy of the main garland at their workstation. It’s an imperfect system though, so the elves have to request a manual refresh to see the latest copy. They can request a new copy by running the command
git pull --rebase=preserve
(They found that if they ran git pull on its own, they ended up with weird loops of extra beads off the main garland, so they’ve opted to use this method.) This keeps the shared garland up to date, which makes things a lot easier. A visualisation of the rebase process is available.
The next thing the elves noticed is that if they worked on the main workshop garland, they were always running into problems when they tried to share their work back with the rest of the workshop. It was fine if they were working late at night by themselves, but in the middle of the day, it was horrible. (I’ve been asked not to talk about that time the fight broke out.) Instead of trying to share everything on their local copy of the main garland, the elves have realised it’s a lot easier to work on a new string and then knot this onto the main garland when their pattern repeat is finished. They generate a new string by issuing the following commands:
git checkout master
git checkout -b 1234_pattern-name
1234 represents the work order number and pattern-name describes the pattern they’re adding. Each bead is then added to the new link (git add bead.txt) and locked into place (git commit). Each elf repeats this process until the sequence of beads described in the work order has been added to their mini garland.
To combine their work with the main garland, the elves need to make a few decisions. If they’re making a single strand, they issue the following commands:
git checkout master
git merge --ff-only 1234_pattern-name
To share their work they publish the new version of the main garland to the workshop spool with the command git push origin master.
Sometimes this fails. Sharing work fails because the workshop spool has gotten new links added since the elf last updated their copy of the main workshop spool. This makes the elves both happy and sad. It makes them happy because it means the other elves have been working too, but it makes them sad because they now need to do a bit of extra work to close their work order.
To update the local copy of the workshop spool, the elf first unlinks the chain they just linked by running the command:
git reset --merge ORIG_HEAD
This works because the garland magic notices when the elves are doing a particularly dangerous thing and places a temporary, invisible bookmark to the last safe bead in the chain before the dangerous thing happened. The garland no longer has the elf’s work, and can be updated safely. The elf runs the command git pull --rebase=preserve and the changes all the other elves have made are applied locally.
With these new beads in place, the elf now has to restring their own chain so that it starts at the right place. To do this, the elf turns back to their own chain (git checkout 1234_pattern-name) and runs the command git rebase master. Assuming their bead pattern is completely unique, the process will run and the elf’s beads will be restrung on the tip of the main workshop garland.
Sometimes the magic fails and the elf has to deal with merge conflicts. These are kind of annoying, so the elf uses a special inspector tool to figure things out. The elf opens the inspector by running the command git mergetool to work through places where their beads have been added at the same points as another elf’s beads. Once all the conflicts are resolved, the elf saves their work, and quits the inspector. They might need to do this a few times if there are a lot of new beads, so the elf has learned to follow this update process regularly instead of just waiting until they’re ready to close out their work order.
Once their link is up to date, the elf can now reapply their chain as before, publish their work to the main workshop garland, and close their work order:
git checkout master
git merge --ff-only 1234_pattern-name
git push origin master
Generally this process works well for the elves. Sometimes, though, when they’re tired or bored or a little drunk on festive cheer, they realise there’s a mistake in their chain of beads. Fortunately they can fix the beads without anyone else knowing. These tools can be applied to the whole workshop chain as well, but it causes problems because the magic assumes that elves are only ever adding to the main chain, not removing or reordering beads on the fly. Depending on where the mistake is, the elf has a few different options.
Let’s pretend the elf has a sequence of five beads she’s been working on. The work order says the pattern should be red-blue-red-blue-red.
If the sequence of beads is wrong (for example, blue-blue-red-red-red), the elf can remove the beads from the chain, but keep the beads in her workstation using the command git reset --soft HEAD~5.
If she’s been using the wrong colours and the wrong pattern (for example, green-green-yellow-yellow-green), she can remove the beads from her chain and discard them from her workstation using the command git reset --hard HEAD~5.
If one of the beads is missing (for example, red-blue-blue-red), she can restring the beads using the first method, or she can use a bit of magic to add the missing bead into the sequence.
Using a tool that’s a bit like orthoscopic surgery, she first selects a sequence of beads which contains the problem. A visualisation of this process is available.
Start the garland surgery process with the command:
git rebase --interactive HEAD~4
A new screen comes up with the following information (the oldest bead is on top):
pick c2e4877 Red bead
pick 9b5555e Blue bead
pick 7afd66b Blue bead
pick e1f2537 Red bead
The elf adjusts the list, changing “pick” to “edit” next to the first blue bead:
pick c2e4877 Red bead
edit 9b5555e Blue bead
pick 7afd66b Blue bead
pick e1f2537 Red bead
She then saves her work and quits the editor. The garland magic has placed her back in time at the moment just after she added the first blue bead.
She needs to manually fix up her garland to add the new red bead. If the beads were files, she might run commands like vim beads.txt and edit the file to make the necessary changes.
Once she’s finished her changes, she needs to add her new bead to the garland (git add --all) and lock it into place (git commit). This time she assigns the commit message “Red bead – added” so she can easily find it.
The garland magic has replaced the bead, but she still needs to verify the remaining beads on the garland. This is a mostly automatic process which is started by running the command git rebase --continue.
The new red bead has been assigned a position formerly held by the blue bead, and so the elf must deal with a merge conflict. She opens up a new program to help resolve the conflict by running git mergetool.
She knows she wants both of these beads in place, so the elf edits the file to include both the red and blue beads.
With the conflict resolved, the elf saves her changes and quits the mergetool.
Back at the command line, the elf checks the status of her work using the command git status.
rebase in progress; onto 4a9cb9d
You are currently rebasing branch '2_RBRBR' on '4a9cb9d'.
(all conflicts fixed: run "git rebase --continue")
Changes to be committed:
(use "git reset HEAD <file>..." to unstage)
modified: beads.txt
Untracked files:
(use "git add <file>..." to include in what will be committed)
beads.txt.orig
She removes the file added by the mergetool with the command rm beads.txt.orig and commits the edits she just made to the bead file using the commands:
git add beads.txt
git commit --message "Blue bead -- resolved conflict"
With the conflict resolved, the elf is able to continue with the rebasing process using the command git rebase --continue. There is one final conflict the elf needs to resolve. Once again, she opens up the visualisation tool and takes a look at the two conflicting files.
She incorporates the changes from the left and right column to ensure her bead sequence is correct.
Once the merge conflict is resolved, the elf saves the file and quits the mergetool. Once again, she cleans out the backup file added by the mergetool (rm beads.txt.orig) and commits her changes to the garland:
git add beads.txt
git commit --message "Red bead -- resolved conflict"
and then runs the final verification steps in the rebase process (git rebase --continue).
The verification process runs through to the end, and the elf checks her work using the command git log --oneline.
9269914 Red bead -- resolved conflict
4916353 Blue bead -- resolved conflict
aef0d5c Red bead -- added
9b5555e Blue bead
c2e4877 Red bead
She knows she needs to read the sequence from bottom to top (the oldest bead is on the bottom). Reviewing the list she sees that the sequence is now correct.
Sometimes, late at night, the elf makes new copies of the workshop garland so she can play around with the bead sequencer just to see what happens. It’s made her more confident at restringing beads when she’s found real mistakes. And she doesn’t mind helping her fellow elves when they run into trouble with their beads. The sugar cookies they leave her as thanks don’t hurt either. If you would also like to play with the bead sequencer, you can get a copy of the branches the elf worked.
Our lessons from the workshop:
By using rebase to update your branches, you avoid merge commits and keep a clean commit history.
If you make a mistake on one of your local branches, you can use reset to take commits off your branch. If you want to save the work, but uncommit it, add the parameter --soft. If you want to completely discard the work, use the parameter, --hard.
If you have merged working branch changes to the local copy of your master branch and it is preventing you from pushing your work to a remote repository, remove these changes using the command reset with the parameter --merge ORIG_HEAD before updating your local copy of the remote master branch.
If you want to make a change to work that was committed a little while ago, you can use the command rebase with the parameter --interactive. You will need to include how many commits back in time you want to review. |
2015 |
Emma Jane Westby |
emmajanewestby |
2015-12-07T00:00:00+00:00 |
https://24ways.org/2015/git-rebasing/ |
code |
| 68 |
Grid, Flexbox, Box Alignment: Our New System for Layout |
Three years ago for 24 ways 2012, I wrote an article about a new CSS layout method I was excited about. A specification had emerged, developed by people from the Internet Explorer team, bringing us a proper grid system for the web. In 2015, that Internet Explorer implementation is still the only public implementation of CSS grid layout. However, in 2016 we should be seeing it in a new improved form ready for our use in browsers.
Grid layout has developed hidden behind a flag in Blink, and in nightly builds of WebKit and, latterly, Firefox. By being developed in this way, breaking changes could be safely made to the specification as no one was relying on the experimental implementations in production work.
Another new layout method has emerged over the past few years in a more public and perhaps more painful way. Shipped prefixed in browsers, The flexible box layout module (flexbox) was far too tempting for developers not to use on production sites. Therefore, as changes were made to the specification, we found ourselves with three different flexboxes, and browser implementations that did not match one another in completeness or in the version of specified features they supported.
Owing to the different ways these modules have come into being, when I present on grid layout it is often the very first time someone has heard of the specification. A question I keep being asked is whether CSS grid layout and flexbox are competing layout systems, as though it might be possible to back the loser in a CSS layout competition. The reality, however, is that these two methods will sit together as one system for doing layout on the web, each method playing to certain strengths and serving particular layout tasks.
If there is to be a loser in the battle of the layouts, my hope is that it will be the layout frameworks that tie our design to our markup. They have been a necessary placeholder while we waited for a true web layout system, but I believe that in a few years time we’ll be easily able to date a website to circa 2015 by seeing <div class="row"> or <div class="col-md-3"> in the markup.
In this article, I’m going to take a look at the common features of our new layout systems, along with a couple of examples which serve to highlight the differences between them.
To see the grid layout examples you will need to enable grid in your browser. The easiest thing to do is to enable the experimental web platform features flag in Chrome. Details of current browser support can be found here.
Relationship
Items only become flex or grid items if they are a direct child of the element that has display:flex, display:grid or display:inline-grid applied. Those direct children then understand themselves in the context of the complete layout. This makes many things possible. It’s the lack of relationship between elements that makes our existing layout methods difficult to use. If we float two columns, left and right, we have no way to tell the shorter column to extend to the height of the taller one. We have expended a lot of effort trying to figure out the best way to make full-height columns work, using techniques that were never really designed for page layout.
At a very simple level, the relationship between elements means that we can easily achieve full-height columns. In flexbox:
See the Pen Flexbox equal height columns by rachelandrew (@rachelandrew) on CodePen.
And in grid layout (requires a CSS grid-supporting browser):
See the Pen Grid equal height columns by rachelandrew (@rachelandrew) on CodePen.
Alignment
Full-height columns rely on our flex and grid items understanding themselves as part of an overall layout. They also draw on a third new specification: the box alignment module. If vertical centring is a gift you’d like to have under your tree this Christmas, then this is the box you’ll want to unwrap first.
The box alignment module takes the alignment and space distribution properties from flexbox and applies them to other layout methods. That includes grid layout, but also other layout methods. Once implemented in browsers, this specification will give us true vertical centring of all the things.
Our examples above achieved full-height columns because the default value of align-items is stretch. The value ensured our columns stretched to the height of the tallest. If we want to use our new vertical centring abilities on all items, we would set align-items:center on the container. To align one flex or grid item, apply the align-self property.
The examples below demonstrate these alignment properties in both grid layout and flexbox. The portrait image of Widget the cat is aligned with the default stretch. The other three images are aligned using different values of align-self.
Take a look at an example in flexbox:
See the Pen Flexbox alignment by rachelandrew (@rachelandrew) on CodePen.
And also in grid layout (requires a CSS grid-supporting browser):
See the Pen Grid alignment by rachelandrew (@rachelandrew) on CodePen.
The alignment properties used with CSS grid layout.
Fluid grids
A cornerstone of responsive design is the concept of fluid grids.
“[…]every aspect of the grid—and the elements laid upon it—can be expressed as a proportion relative to its container.”
—Ethan Marcotte, “Fluid Grids”
The method outlined by Marcotte is to divide the target width by the context, then use that value as a percentage value for the width property on our element.
h1 {
margin-left: 14.575%; /* 144px / 988px = 0.14575 */
width: 70.85%; /* 700px / 988px = 0.7085 */
}
In more recent years, we’ve been able to use calc() to simplify this (at least, for those of us able to drop support for Internet Explorer 8). However, flexbox and grid layout make fluid grids simple.
The most basic of flexbox demos shows this fluidity in action. The justify-content property – another property defined in the box alignment module – can be used to create an equal amount of space between or around items. As the available width increases, more space is assigned in proportion.
In this demo, the list items are flex items due to display:flex being added to the ul. I have given them a maximum width of 250 pixels. Any remaining space is distributed equally between the items as the justify-content property has a value of space-between.
See the Pen Flexbox: justify-content by rachelandrew (@rachelandrew) on CodePen.
For true fluid grid-like behaviour, your new flexible friends are flex-grow and flex-shrink. These properties give us the ability to assign space in proportion.
The flexbox flex property is a shorthand for:
flex-grow
flex-shrink
flex-basis
The flex-basis property sets the default width for an item. If flex-grow is set to 0, then the item will not grow larger than the flex-basis value; if flex-shrink is 0, the item will not shrink smaller than the flex-basis value.
flex: 1 1 200px: a flexible box that can grow and shrink from a 200px basis.
flex: 0 0 200px: a box that will be 200px and cannot grow or shrink.
flex: 1 0 200px: a box that can grow bigger than 200px, but not shrink smaller.
In this example, I have a set of boxes that can all grow and shrink equally from a 100 pixel basis.
See the Pen Flexbox: flex-grow by rachelandrew (@rachelandrew) on CodePen.
What I would like to happen is for the first element, containing a portrait image, to take up less width than the landscape images, thus keeping it more in proportion. I can do this by changing the flex-grow value. By giving all the items a value of 1, they all gain an equal amount of the available space after the 100 pixel basis has been worked out.
If I give them all a value of 3 and the first box a value of 1, the other boxes will be assigned three parts of the available space while box 1 is assigned only one part. You can see what happens in this demo:
See the Pen Flexbox: flex-grow by rachelandrew (@rachelandrew) on CodePen.
Once you understand flex-grow, you should easily be able to grasp how the new fraction unit (fr, defined in the CSS grid layout specification) works. Like flex-grow, this unit allows us to assign available space in proportion. In this case, we assign the space when defining our track sizes.
In this demo (which requires a CSS grid-supporting browser), I create a four-column grid using the fraction unit to define my track sizes. The first track is 1fr in width, and the others 2fr.
grid-template-columns: 1fr 2fr 2fr 2fr;
See the Pen Grid fraction units by rachelandrew (@rachelandrew) on CodePen.
The four-track grid.
Separation of concerns
My younger self petitioned my peers to stop using tables for layout and to move to CSS. One of the rallying cries of that movement was the concept of separating our source and content from how they were displayed. It was something of a failed promise given the tools we had available: the display leaked into the markup with the need for redundant elements to cope with browser bugs, or visual techniques that just could not be achieved without supporting markup.
Browsers have improved, but even now we can find ourselves compromising the ideal document structure so we can get the layout we want at various breakpoints. In some ways, the situation has returned to tables-for-layout days. Many of the current grid frameworks rely on describing our layout directly in the markup. We add divs for rows, and classes to describe the number of desired columns. We nest these constructions of divs inside one another.
Here is a snippet from the Bootstrap grid examples – two columns with two nested columns:
<div class="row">
<div class="col-md-8">
.col-md-8
<div class="row">
<div class="col-md-6">
.col-md-6
</div>
<div class="col-md-6">
.col-md-6
</div>
</div>
</div>
<div class="col-md-4">
.col-md-4
</div>
</div>
Not a million miles away from something I might have written in 1999.
<table>
<tr>
<td class="col-md-8">
.col-md-8
<table>
<tr>
<td class="col-md-6">
.col-md-6
</td>
<td class="col-md-6">
.col-md-6
</td>
</tr>
</table>
</td>
<td class="col-md-4">
.col-md-4
</td>
</tr>
</table>
Grid and flexbox layouts do not need to be described in markup. The layout description happens entirely in the CSS, meaning that elements can be moved around from within the presentation layer.
Flexbox gives us the ability to reverse the flow of elements, but also to set the order of elements with the order property. This is demonstrated here, where Widget the cat is in position 1 in the source, but I have used the order property to display him after the things that are currently unimpressive to him.
See the Pen Flexbox: order by rachelandrew (@rachelandrew) on CodePen.
Grid layout takes this a step further. Where flexbox lets us set the order of items in a single dimension, grid layout gives us the ability to position things in two dimensions: both rows and columns. Defined in the CSS, this positioning can be changed at any breakpoint without needing additional markup. Compare the source order with the display order in this example (requires a CSS grid-supporting browser):
See the Pen Grid positioning in two dimensions by rachelandrew (@rachelandrew) on CodePen.
Laying out our items in two dimensions using grid layout.
As these demos show, a straightforward way to decide if you should use grid layout or flexbox is whether you want to position items in one dimension or two. If two, you want grid layout.
A note on accessibility and reordering
The issues arising from this powerful ability to change the way items are ordered visually from how they appear in the source have been the subject of much discussion. The current flexbox editor’s draft states
“Authors must use order only for visual, not logical, reordering of content. Style sheets that use order to perform logical reordering are non-conforming.”
—CSS Flexible Box Layout Module Level 1, Editor’s Draft (3 December 2015)
This is to ensure that non-visual user agents (a screen reader, for example) can rely on the document source order as being correct. Take care when reordering that you do so from the basis of a sound document that makes sense in terms of source order. Avoid using visual order to convey meaning.
Automatic content placement with rules
Having control over the order of items, or placing items on a predefined grid, is nice. However, we can often do that already with one method or another and we have frameworks and tools to help us. Tools such as Susy mean we can even get away from stuffing our markup full of grid classes. However, our new layout methods give us some interesting new possibilities.
Something that is useful to be able to do when dealing with content coming out of a CMS or being pulled from some other source, is to define a bunch of rules and then say, “Display this content, using these rules.”
As an example of this, I will leave you with a Christmas poem displayed in a document alongside Widget the cat and some of the decorations that are bringing him no Christmas cheer whatsoever.
The poem is displayed first in the source as a set of paragraphs. I’ve added a class identifying each of the four paragraphs but they are displayed in the source as one text. Below that are all my images, some landscape and some portrait; I’ve added a class of landscape to the landscape ones.
The mobile-first grid is a single column and I use line-based placement to explicitly position my poem paragraphs. The grid layout auto-placement rules then take over and place the images into the empty cells left in the grid.
At wider screen widths, I declare a four-track grid, and position my poem around the grid, keeping it in a readable order.
I also add rules to my landscape class, stating that these items should span two tracks. Once again the grid layout auto-placement rules position the rest of my images without my needing to position them. You will see that grid layout takes items out of source order to fill gaps in the grid. It does this because I have set the property grid-auto-flow to dense. The default is sparse meaning that grid will not attempt this backfilling behaviour.
Take a look and play around with the full demo (requires a CSS grid layout-supporting browser):
See the Pen Grid auto-flow with rules by rachelandrew (@rachelandrew) on CodePen.
The final automatic placement example.
My wish for 2016
I really hope that in 2016, we will see CSS grid layout finally emerge from behind browser flags, so that we can start to use these features in production — that we can start to move away from using the wrong tools for the job.
However, I also hope that we’ll see developers fully embracing these tools as the new system that they are. I want to see people exploring the possibilities they give us, rather than trying to get them to behave like the grid systems of 2015. As you discover these new modules, treat them as the new paradigm that they are, get creative with them. And, as you find the edges of possibility with them, take that feedback to the CSS Working Group. Help improve the layout systems that will shape the look of the future web.
Some further reading
I maintain a site of grid layout examples and resources at Grid by Example.
The three CSS specifications I’ve discussed can be found as editor’s drafts: CSS grid, flexbox, box alignment.
I wrote about the last three years of my interest in CSS grid layout, which gives something of a history of the specification.
More examples of box alignment and grid layout.
My presentation at Fronteers earlier this year, in which I explain more about these concepts. |
2015 |
Rachel Andrew |
rachelandrew |
2015-12-15T00:00:00+00:00 |
https://24ways.org/2015/grid-flexbox-box-alignment-our-new-system-for-layout/ |
code |
| 288 |
Displaying Icons with Fonts and Data- Attributes |
Traditionally, bitmap formats such as PNG have been the standard way of delivering iconography on websites. They’re quick and easy, and it also ensures they’re as pixel crisp as possible. Bitmaps have two drawbacks, however: multiple HTTP requests, affecting the page’s loading performance; and a lack of scalability, noticeable when the page is zoomed or viewed on a screen with a high pixel density, such as the iPhone 4 and 4S.
The requests problem is normally solved by using CSS sprites, combining the icon set into one (physically) large image file and showing the relevant portion via background-position. While this works well, it can get a bit fiddly to specify all the positions. In particular, scalability is still an issue. A vector-based format such as SVG sounds ideal to solve this, but browser support is still patchy.
The rise and adoption of web fonts have given us another alternative. By their very nature, they’re not only scalable, but resolution-independent too. No need to specify higher resolution graphics for high resolution screens!
That’s not all though:
Browser support: Unlike a lot of new shiny techniques, they have been supported by Internet Explorer since version 4, and, of course, by all modern browsers. We do need several different formats, however!
Design on the fly: The font contains the basic graphic, which can then be coloured easily with CSS – changing colours for themes or :hover and :focus styles is done with one line of CSS, rather than requiring a new graphic. You can also use CSS3 properties such as text-shadow to add further effects. Using -webkit-background-clip: text;, it’s possible to use gradient and inset shadow effects, although this creates a bitmap mask which spoils the scalability.
Small file size: specially designed icon fonts, such as Drew Wilson’s Pictos font, can be as little as 12Kb for the .woff font. This is because they contain fewer characters than a fully fledged font. You can see Pictos being used in the wild on sites like Garrett Murray’s Maniacal Rage.
As with all formats though, it’s not without its disadvantages:
Icons can only be rendered in monochrome or with a gradient fill in browsers that are capable of rendering CSS3 gradients. Specific parts of the icon can’t be a different colour.
It’s only appropriate when there is an accompanying text to provide meaning. This can be alleviated by wrapping the text label in a tag (I like to use <b> rather than <span>, due to the fact that it’s smaller and isn’ t being used elsewhere) and then hiding it from view with text-indent:-999em.
Creating an icon font can be a complex and time-consuming process. While font editors can carry out hinting automatically, the best results are achieved manually.
Unless you’re adept at creating your own fonts, you’re restricted to what is available in the font. However, fonts like Pictos will cover the most common needs, and icons are most effective when they’re using familiar conventions.
The main complaint about using fonts for icons is that it can mean adding a meaningless character to our markup. The good news is that we can overcome this by using one of two methods – CSS generated content or the data-icon attribute – in combination with the :before and :after pseudo-selectors, to keep our markup minimal and meaningful.
Our simple markup looks like this:
<a href="/basket" class="icon basket">View Basket</a>
Note the multiple class attributes. Next, we’ll import the Pictos font using the @font-face web fonts property in CSS:
@font-face {
font-family: 'Pictos';
src: url('pictos-web.eot');
src: local('☺'),
url('pictos-web.woff') format('woff'),
url('pictos-web.ttf') format('truetype'),
url('pictos-web.svg#webfontIyfZbseF') format('svg');
}
This rather complicated looking set of rules is (at the time of writing) the most bulletproof way of ensuring as many browsers as possible load the font we want. We’ll now use the content property applied to the :before pseudo-class selector to generate our icon. Once again, we’ll use those multiple class attribute values to set common icon styles, then specific styles for .basket. This helps us avoid repeating styles:
.icon {
font-family: 'Pictos';
font-size: 22px:
}
.basket:before {
content: "$";
}
What does the :before pseudo-class do? It generates the dollar character in a browser, even when it’s not present in the markup. Using the generated content approach means our markup stays simple, but we’ll need a new line of CSS, defining what letter to apply to each class attribute for every icon we add.
data-icon is a new alternative approach that uses the HTML5 data- attribute in combination with CSS attribute selectors. This new attribute lets us add our own metadata to elements, as long as its prefixed by data- and doesn’t contain any uppercase letters. In this case, we want to use it to provide the letter value for the icon. Look closely at this markup and you’ll see the data-icon attribute.
<a href="/basket" class="icon" data-icon="$">View Basket</a>
We could add others, in fact as many as we like.
<a href="/" class="icon" data-icon="k">Favourites</a>
<a href="/" class="icon" data-icon="t">History</a>
<a href="/" class="icon" data-icon="@">Location</a>
Then, we need just one CSS attribute selector to style all our icons in one go:
.icon:before {
content: attr(data-icon);
/* Insert your fancy colours here */
}
By placing our custom attribute data-icon in the selector in this way, we can enable CSS to read the value of that attribute and display it before the element (in this case, the anchor tag). It saves writing a lot of CSS rules. I can imagine that some may not like the extra attribute, but it does keep it out of the actual content – generated or not.
This could be used for all manner of tasks, including a media player and large simple illustrations. See the demo for live examples. Go ahead and zoom the page, and the icons will be crisp, with the exception of the examples that use -webkit-background-clip: text as mentioned earlier.
Finally, it’s worth pointing out that with both generated content and the data-icon method, the letter will be announced to people using screen readers. For example, with the shopping basket icon above, the reader will say “dollar sign view basket”. As accessibility issues go, it’s not exactly the worst, but could be confusing. You would need to decide whether this method is appropriate for the audience. Despite the disadvantages, icon fonts have huge potential. |
2011 |
Jon Hicks |
jonhicks |
2011-12-12T00:00:00+00:00 |
https://24ways.org/2011/displaying-icons-with-fonts-and-data-attributes/ |
code |
| 80 |
HTML5 Video Bumpers |
Video is a bigger part of the web experience than ever before. With native browser support for HTML5 video elements freeing us from the tyranny of plugins, and the availability of faster internet connections to the workplace, home and mobile networks, it’s now pretty straightforward to publish video in a way that can be consumed in all sorts of ways on all sorts of different web devices.
I recently worked on a project where the client had shot some dedicated video shorts to publish on their site. They also had some five-second motion graphics produced to top and tail the videos with context and branding. This pretty common requirement is a great idea on the web, where a user might land at your video having followed a link and be viewing a page without much context.
Known as bumpers, these short introduction clips help brand a video and make it look a lot more professional.
Adding bumpers to a video
The simplest way to add bumpers to a video would be to edit them on to the start and end of the video file itself. Cooking the bumpers into the video file is easy, but should you ever want to update them it can become a real headache. If the branding needs updating, for example, you’d need to re-edit and re-encode all your videos. Not a fun task.
What if the bumpers could be added dynamically? That would enable you to use the same bumper for multiple videos (decreasing download time for users who might watch more than one) and to update the bumpers whenever you wanted. You could change them seasonally, update them for special promotions, run different advertising slots, perform multivariate testing, or even target different bumpers to different users.
The trade-off, of course, is that if you dynamically add your bumpers, there’s a chance that a user in a given circumstance might not see the bumper. For example, if the main video feature was uploaded to YouTube, you’d have no way to control the playback. As always, you need to weigh up the pros and cons and make your choice.
HTML5 bumpers
If you wanted to dynamically add bumpers to your HTML5 video, how would you go about it? That was the question I found myself needing to answer for this particular client project.
My initial thought was to treat it just like an image slideshow. If I were building a slideshow that moved between images, I’d use CSS absolute positioning with z-index to stack the images up on top of each other in a pile, with the first image on top. To transition to the second image, I’d use JavaScript to fade the top image out, revealing the second image beneath it.
Now that video is just a native object in the DOM, just like an image, why not do the same? Stack the videos up with the opening bumper on top, listen for the video’s onended event, and fade it out to reveal the main feature behind. Good idea, right?
Wrong
Remember that this is the web. It’s never going to be that easy. The problem here is that many non-desktop devices use native, dedicated video players. Think about watching a video on a mobile phone – when you play the video, the phone often goes full-screen in its native player, leaving the web page behind. There’s no opportunity to fade or switch z-index, as the video isn’t being viewed in the page. Your page is left powerless. Powerless!
So what can we do? What can we control?
Those of us with particularly long memories might recall a time before CSS, when we’d have to use JavaScript to perform image rollovers. As CSS background images weren’t a practical reality, we would use lots of <img> elements, and perform a rollover by modifying the src attribute of the image.
Turns out, this old trick of modifying the source can help us out with video, too. In most cases, modifying the src attribute of a <video> element, or perhaps more likely the src attribute of a source element, will swap from one video to another.
Swappin’ it
Let’s take a deliberately simple example of a super-basic video tag:
<video src="mycat.webm" controls>no fallback coz i is lame, innit.</video>
We could very simply write a script to find all video tags and give them a new src to show our bumper.
<script>
var videos, i, l;
videos = document.getElementsByTagName('video');
for(i=0, l=videos.length; i<l; i++) {
videos[i].setAttribute('src', 'bumper-in.webm');
}
</script>
View the example in a browser with WebM support. You’ll see that the video is swapped out for the opening bumper. Great!
Beefing it up
Of course, we can’t just publish video in one format. In practical use, you need a <video> element with multiple <source> elements containing your different source formats.
<video controls>
<source src="mycat.mp4" type="video/mp4" />
<source src="mycat.webm" type="video/webm" />
<source src="mycat.ogv" type="video/ogg" />
</video>
This time, our script needs to loop through the sources, not the videos. We’ll use a regular expression replacement to swap out the file name while maintaining the correct file extension.
<script>
var sources, i, l, orig;
sources = document.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('src');
sources[i].setAttribute('src', orig.replace(/(w+).(w+)/, 'bumper-in.$2'));
// reload the video
sources[i].parentNode.load();
}
</script>
The difference this time is that when changing the src of a <source> we need to call the .load() method on the video to get it to acknowledge the change.
See the code in action, this time in a wider range of browsers.
But, my video!
I guess we should get the original video playing again. Keeping the same markup, we need to modify the script to do two things:
Store the original src in a data- attribute so we can access it later
Add an event listener so we can detect the end of the bumper playing, and load the original video back in
As we need to loop through the videos this time to add the event listener, I’ve moved the .load() call into that loop. It’s a bit more efficient to call it only once after modifying all the video’s sources.
<script>
var videos, sources, i, l, orig;
sources = document.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('src');
sources[i].setAttribute('data-orig', orig);
sources[i].setAttribute('src', orig.replace(/(w+).(w+)/, 'bumper-in.$2'));
}
videos = document.getElementsByTagName('video');
for(i=0, l=videos.length; i<l; i++) {
videos[i].load();
videos[i].addEventListener('ended', function(){
sources = this.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('data-orig');
if (orig) {
sources[i].setAttribute('src', orig);
}
sources[i].setAttribute('data-orig','');
}
this.load();
this.play();
});
}
</script>
Again, view the example to see the bumper play, followed by our spectacular main feature. (That’s my cat, Widget. His interests include sleeping and internet marketing.)
Tidying things up
The final thing to do is add our closing bumper after the main video has played. This involves the following changes:
We need to keep track of whether the src has been changed, so we only play the video if it’s changed. I’ve added the modified variable to track this, and it stops us getting into a situation where the video just loops forever.
Add an else to the event listener, for when the orig is false (so the main feature has been playing) to load in the end bumper. We also check that we’re not already playing the end bumper. Because looping.
<script>
var videos, sources, i, l, orig, current, modified;
sources = document.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('src');
sources[i].setAttribute('data-orig', orig);
sources[i].setAttribute('src', orig.replace(/(w+).(w+)/, 'bumper-in.$2'));
}
videos = document.getElementsByTagName('video');
for(i=0, l=videos.length; i<l; i++) {
videos[i].load();
modified = false;
videos[i].addEventListener('ended', function(){
sources = this.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('data-orig');
if (orig) {
sources[i].setAttribute('src', orig);
modified = true;
}else{
current = sources[i].getAttribute('src');
if (current.indexOf('bumper-out')==-1) {
sources[i].setAttribute('src', current.replace(/([w]+).(w+)/, 'bumper-out.$2'));
modified = true;
}else{
this.pause();
modified = false;
}
}
sources[i].setAttribute('data-orig','');
}
if (modified) {
this.load();
this.play();
}
});
}
</script>
Yo ho ho, that’s a lot of JavaScript. See it in action – you should get a bumper, the cat video, and an end bumper.
Of course, this code works fine for demonstrating the principle, but it’s very procedural. Nothing wrong with that, but to do something similar in production, you’d probably want to make the code more modular to ease maintainability. Besides, you may want to use a framework, rather than basic JavaScript.
The end credits
One really important principle here is that of progressive enhancement. If the browser doesn’t support JavaScript, the user won’t see your bumper, but they will get the main video. If the browser supports JavaScript but doesn’t allow you to modify the src (as was the case with older versions of iOS), the user won’t see your bumper, but they will get the main video.
If a search engine or social media bot grabs your page and looks for content, they won’t see your bumper, but they will get the main video – which is absolutely what you want.
This means that if the bumper is absolutely crucial, you may still need to cook it into the video. However, for many applications, running it dynamically can work quite well.
As always, it comes down to three things:
Measure your audience: know how people access your site
Test the solution: make sure it works for your audience
Plan for failure: it’s the web and that’s how things work ‘round these parts
But most of all play around with it, have fun and build something awesome. |
2012 |
Drew McLellan |
drewmclellan |
2012-12-01T00:00:00+00:00 |
https://24ways.org/2012/html5-video-bumpers/ |
code |
| 264 |
Dynamic Social Sharing Images |
Way back when social media was new, you could be pretty sure that whatever you posted would be read by those who follow you. If you’d written a blog post and you wanted to share it with those who follow you, you could post a link and your followers would see it in their streams. Oh heady days!
With so many social channels and a proliferation of content and promotions flying past in everyone’s streams, it’s no longer enough to share content on social media, you have to actively sell it if you want it to be seen. You really need to make the most of every opportunity to catch a reader’s attention if you’re trying to get as many eyes as possible on that sweet, sweet social content.
One of the best ways to grab attention with your posts or tweets is to include an image. There’s heaps of research that says that having images in your posts helps them stand out to followers. Reports I found showed figures from anything from 35% to 150% improvement from just having image in a post. Unfortunately, the details were surrounded with gross words like engagement and visual marketing assets and so I had to close the page before I started to hate myself too much.
So without hard stats to quote, we’ll call it a rule of thumb. The rule of thumb is that posts with images will grab more attention than those without, so it makes sense that when adding pages to a website, you should make sure that they have social media sharing images associated with them.
Adding sharing images
The process for declaring an image to be used in places like Facebook and Twitter is very simple, and at this point is familiar to many of us. You add a meta tag to the head of the page to point to the location of the image to use. When a link to the page is added to a post, the social network will fetch the page, look for the meta tag and then use the image you specified.
<meta property="og:image" content="https://example.com/my_image.jpg">
There’s a good post on this over at CSS-Tricks if you need to bone up on the details of this and other similar meta tags for social media sharing.
This is all fine and well for content that has a very obvious choice of image to go along with it, but what if you don’t necessarily have an image? One approach is to use stock photography, but that’s not going to be right for every situation.
This was something we faced with 24 ways in 2017. We wanted to add images to the tweets we post each day announcing a new article. Some articles have images, but not all, and there tended not to be any consistency in terms of imagery from one article to the next. We always have an author photograph, but those don’t usually lend themselves directly to being the main ‘hero’ image for an article.
Putting his thinking cap on, Paul came up with a design for an image that used the author photo along with a quote extracted from the article.
One of the hand-made sharing images from 2017
Each day we would pick a quote from the article, and Paul would manually compose an image to be uploaded to the site. The results were great, but the whole process was a bit too labour intensive and relied on an individual (Paul) being available each day to do the work. I thought we could probably improve this.
Hatching a new plan
One initial idea I came up with was to script the image editor to dynamically build a new image by pulling content from our database. Sketch has plugins available to pull JSON content into a design, and our CMS can easily output JSON data, so that was one possibility.
The more I thought about this and how much I wish graphic design tools worked just a little bit more like CSS, the obvious solution hit me. We should just build it with CSS!
In fact, as the author name and image already exist in our CMS, and the visual styling is based on the design of the website, couldn’t this just be another page on the site generated by the CMS?
Breaking it down, I figured the steps needed would be something like:
Create the CSS to lay out a component that could be turned into an image
Add a new field to articles in the CMS to hold a handpicked quote
Build a new article template in the CMS to output the author name and quote dynamically for any article
… um … screenshot?
I thought I’d get cracking and see if I could figure out the final steps later.
Building the page
The first thing to tackle was the basic HTML and CSS to lay out the components for our image. That bit was really easy, as I just asked Paul to do it. Everyone should have a Paul.
Paul’s code uses a fixed dimension container in the HTML, set to 600 × 315px. This is to make it the correct aspect ratio for Facebook’s recommended image size. It’s useful to remember here that it doesn’t need to be responsive or robust, as the page only needs to lay out correctly for a screenshot and a fixed size in a known browser.
With the markup and CSS in place, I turned this into a new template. Our CMS can easily display content through any number of templates, so I created a version of the article template that was totally stripped down. It only included the author details and the quote, along with Paul’s markup.
I also added the quote as a new field on the article in the CMS, so each ‘image’ could be quickly and easily customised in the editing process.
I added a new field to the article template to capture the quote.
With very little effort, we quickly had a page to dynamically generate our ‘image’ right from the CMS. You can see any of them by adding /sharing onto the end of an article URL for any 2018 article.
Our automatically generated layout direct from the CMS
It soon became clear that the elusive Step 4 was going to be the tricky part. I can create a small page on the site that looks like an image, but how should I go about turning it into one? An obvious route is to screenshot the page by hand, but that’s going back to some of the manual steps I was trying to eliminate, and also opens up a possibility for errors to be made. But it did lead me to the thought… how could I automatically take a screenshot?
Enter Puppeteer
Puppeteer is a Node.js library that provides a nice API onto Headless Chrome. What is Headless Chrome, you ask? It’s just a version of the Chrome browser than runs from the command line without ever drawing anything to a user interface window. It loads pages, renders CSS, runs JavaScript, pretty much every normal thing that Chrome on the desktop does, but without a clicky user interface.
Headless Chrome can be used for all sorts of things such as running automated tests on front-end code after making changes, or… get this… rendering pages that can be used for screenshots. The actual process of writing some code to control Chrome and to take the screenshot is where Puppeteer comes in. Puppeteer puts a friendly layer in front of big old scary Chrome to enable us to interact with it using simple JavaScript code running in Node.
Using Puppeteer, I can write a small script that will repeatably turn a URL into an image. So simple is it to do this, that’s it’s actually Puppeteer’s ‘hello world’ example.
First you install Puppeteer. It downloads a compatible headless browser (actually Chromium) as a dependancy, so you don’t need to worry about installing that. At the command line:
npm i puppeteer
Then save a new file as example.js with this code:
const puppeteer = require('puppeteer');
(async () => {
const browser = await puppeteer.launch();
const page = await browser.newPage();
await page.goto('https://example.com');
await page.screenshot({path: 'example.png'});
await browser.close();
})();
and then run it using Node:
node example.js
This will output an image file example.png to disk, which contains a screenshot of, in this case https://example.com. The logic of the code is reasonably easy to follow:
Launch a browser
Open up a new page
Goto a URL
Take a screenshot
Close the browser
The async function and await keywords are a way to have the script pause and wait for normally asynchronous code to return before proceeding. That’s useful with actions like loading a web page that might take some time to complete. They’re used with Promises, and the effect is to make asynchronous code behave as if it’s synchronous. You can read more about async and await at MDN if you’re interested.
That’s a good proof-of-concept using the basic Puppeteer example. I can take a screenshot of a URL! But what happens if I put the URL of my new special page in there?
Our content is up in the corner of the image with lots of empty space.
That’s not great. It’s okay, but not great. It looks like that, by default, Puppeteer takes a screenshot with a resolution of 800 × 600, so we need to find out how to adjust that. Fortunately, the docs aren’t the worst and I was able to find the page.setViewport() method pretty easily.
const puppeteer = require('puppeteer');
(async () => {
const browser = await puppeteer.launch();
const page = await browser.newPage();
await page.goto('https://24ways.org/2018/clip-paths-know-no-bounds/sharing');
await page.setViewport({
width: 600,
height: 315
});
await page.screenshot({path: 'example.png'});
await browser.close();
})();
This worked! The screenshot is now 600 × 315 as expected. That’s exactly what we asked for. Trouble is, that’s a bit low res and it is nearly 2019 after all. While in those docs, I noticed the deviceScaleFactor option that can be passed to page.setViewport(). Setting that to 2 gives us an image of the same area of the screen, but with twice as many pixels.
await page.setViewport({
width: 600,
height: 315,
deviceScaleFactor: 2
});
Perfect! We now have a programmatic way of turning a URL into an image.
Improving the script
Rather than having a script with a fixed URL in it that outputs an image called example.png, the next step is to make that a bit more dynamic. The aim here is to have a script that we can run with a URL as an argument and have it output an image for that one page. That way we can run it manually, or hook it into part of our site’s build process to automate the generation of the image.
Our goal is to call the script like this:
node shoot-sharing-image.js https://24ways.org/2018/clip-paths-know-no-bounds/
And I want the image to come out with the name clip-paths-know-no-bounds.png. To do that, I need to have my script look for command arguments, and then to split the URL up to grab the slug from it.
// Get the URL and the slug segment from it
const url = process.argv[2];
const segments = url.split('/');
// Get the second-to-last segment (the slug)
const slug = segments[segments.length-2];
We can then use these variables later in the script, remembering to add sharing back onto the end of the URL to get our dedicated page.
(async () => {
const browser = await puppeteer.launch();
const page = await browser.newPage();
await page.goto(url + 'sharing');
await page.setViewport({
width: 600,
height: 315,
deviceScaleFactor: 2
});
await page.screenshot({path: slug + '.png'});
await browser.close();
})();
Once you’re generating the image with Node, there’s all sorts of things you can do with it. An obvious step is to move it to the correct location within your site or project.
You can also run optimisations on the file. I’m using imagemin with pngquant to reduce the file size a little.
const imagemin = require('imagemin');
const imageminPngquant = require('imagemin-pngquant');
await imagemin([slug + '.png'], 'build', {
plugins: [
imageminPngquant({quality: '75-90'})
]
});
You can see the completed example as a gist.
Integrating it with your CMS
So we now have a command we can run to take a URL and generate a custom image for that URL. It’s in a format that can be called by any sort of build script, or triggered from a publishing hook in a CMS. Exactly how you do that is going to depend on the way your site is built and the technology stack you’re using, but it’s likely not too hard as long as you can run a command as part of the process.
For 24 ways this year, I’ve been running the script by hand once each article is ready. My script adds the file to a git repo and pushes to a deployment remote that is configured to automatically deploy static assets to our server. Along with our theme of making incremental improvements, next year I’ll look to automate this one step further.
We may also look at having a few slightly different layouts to choose from, so that each day isn’t exactly the same as the last. Interestingly, we could even try some A/B tests to see if there’s any particular format of image or type of quote that does a better job of grabbing attention. There are lots of possibilities!
By using a bit of ingenuity, some custom CMS templates, and the very useful Puppeteer project, we’ve been able to reliably produce dynamic social media sharing images for all of our articles. In doing so, we reduced the dependancy on any individual for producing those images, and opened up a world of possibilities in how we use those images.
I hope you’ll give it a try! |
2018 |
Drew McLellan |
drewmclellan |
2018-12-24T00:00:00+00:00 |
https://24ways.org/2018/dynamic-social-sharing-images/ |
code |
| 135 |
A Scripting Carol |
We all know the stories of the Ghost of Scripting Past – a time when the web was young and littered with nefarious scripting, designed to bestow ultimate control upon the developer, to pollute markup with event handler after event handler, and to entrench advertising in the minds of all that gazed upon her.
And so it came to be that JavaScript became a dirty word, thrown out of solutions by many a Scrooge without regard to the enhancements that JavaScript could bring to any web page. JavaScript, as it was, was dead as a door-nail.
With the arrival of our core philosophy that all standardistas hold to be true: “separate your concerns – content, presentation and behaviour,” we are in a new era of responsible development the Web Standards Way™. Or are we? Have we learned from the Ghosts of Scripting Past? Or are we now faced with new problems that come with new ways of implementing our solutions?
The Ghost of Scripting Past
If the Ghost of Scripting Past were with us it would probably say:
You must remember your roots and where you came from, and realize the misguided nature of your early attempts for control. That person you see down there, is real and they are the reason you exist in the first place… without them, you are nothing.
In many ways we’ve moved beyond the era of control and we do take into account the user, or at least much more so than we used to. Sadly – there is one advantage that old school inline event handlers had where we assigned and reassigned CSS style property values on the fly – we knew that if JavaScript wasn’t supported, the styles wouldn’t be added because we ended up doing them at the same time.
If anything, we need to have learned from the past that just because it works for us doesn’t mean it is going to work for anyone else – we need to test more scenarios than ever to observe the multitude of browsing arrangements we’ll observe: CSS on with JavaScript off, CSS off/overridden with JavaScript on, both on, both off/not supported. It is a situation that is ripe for conflict.
This may shock some of you, but there was a time when testing was actually easier: back in the day when Netscape 4 was king. Yes, that’s right. I actually kind of enjoyed Netscape 4 (hear me out, please). With NS4’s CSS implementation known as JavaScript Style Sheets, you knew that if JavaScript was off the styles were off too.
The Ghost of Scripting Present
With current best practice – we keep our CSS and JavaScript separate from each other. So what happens when some of our fancy, unobtrusive DOM Scripting doesn’t play nicely with our wonderfully defined style rules?
Lets look at one example of a collapsing and expanding menu to illustrate where we are now:
Simple Collapsing/Expanding Menu Example
We’re using some simple JavaScript (I’m using jquery in this case) to toggle between a CSS state for expanded and not expanded:
JavaScript
$(document).ready(function(){
TWOFOURWAYS.enableTree();
});
var TWOFOURWAYS = new Object();
TWOFOURWAYS.enableTree = function ()
{
$("ul li a").toggle(function(){
$(this.parentNode).addClass("expanded");
}, function() {
$(this.parentNode).removeClass("expanded");
});
return false;
}
CSS
ul li ul {
display: none;
}
ul li.expanded ul {
display: block;
}
At this point we’ve separated our presentation from our content and behaviour, and all is well, right?
Not quite.
Here’s where I typically see failures in the assessment work that I do on web sites and applications (Yes, call me Scrooge – I don’t care!). We know our page needs to work with or without scripting, and we know it needs to work with or without CSS. All too often the testing scenarios don’t take into account combinations.
Testing it out
So what happens when we test this? Make sure you test with:
CSS off
JavaScript off
Use the simple example again.
With CSS off, we revert to a simple nested list of links and all functionality is maintained. With JavaScript off, however, we run into a problem – we have now removed the ability to expand the menu using the JavaScript triggered CSS change.
Hopefully you see the problem – we have a JavaScript and CSS dependency that is critical to the functionality of the page. Unobtrusive scripting and binary on/off tests aren’t enough. We need more.
This Ghost of Scripting Present sighting is seen all too often.
Lets examine the JavaScript off scenario a bit further – if we require JavaScript to expand/show the branch of the tree we should use JavaScript to hide them in the first place. That way we guarantee functionality in all scenarios, and have achieved our baseline level of interoperability.
To revise this then, we’ll start with the sub items expanded, use JavaScript to collapse them, and then use the same JavaScript to expand them.
HTML
<ul>
<li><a href="#">Main Item</a>
<ul class="collapseme">
<li><a href="#">Sub item 1</a></li>
<li><a href="#">Sub item 2</a></li>
<li><a href="#">Sub item 3</a></li>
</ul>
</li>
</ul>
CSS
/* initial style is expanded */
ul li ul.collapseme {
display: block;
}
JavaScript
// remove the class collapseme after the page loads
$("ul ul.collapseme").removeClass("collapseme");
And there you have it – a revised example with better interoperability.
This isn’t rocket surgery by any means. It is a simple solution to a ghostly problem that is too easily overlooked (and often is).
The Ghost of Scripting Future
Well, I’m not so sure about this one, but I’m guessing that in a few years’ time, we’ll all have seen a few more apparitions and have a few more tales to tell. And hopefully we’ll be able to share them on 24 ways.
Thanks to Drew for the invitation to contribute and thanks to everyone else out there for making this a great (and haunting) year on the web! |
2006 |
Derek Featherstone |
derekfeatherstone |
2006-12-21T00:00:00+00:00 |
https://24ways.org/2006/a-scripting-carol/ |
code |
| 293 |
A Favor for Your Future Self |
We tend to think about the future when we build things. What might we want to be able to add later? How can we refactor this down the road? Will this be easy to maintain in six months, a year, two years? As best we can, we try to think about the what-ifs, and build our websites, systems, and applications with this lens.
We comment our code to explain what we knew at the time and how that impacted how we built something. We add to-dos to the things we want to change. These are all great things! Whether or not we come back to those to-dos, refactor that one thing, or add new features, we put in a bit of effort up front just in case to give us a bit of safety later.
I want to talk about a situation that Past Alicia and Team couldn’t even foresee or plan for. Recently, the startup I was a part of had to remove large sections of our website. Not just content, but entire pages and functionality. It wasn’t a very pleasant experience, not only for the reason why we had to remove so much of what we had built, but also because it’s the ultimate “I really hope this doesn’t break something else” situation. It was a stressful and tedious effort of triple checking that the things we were removing weren’t dependencies elsewhere. To be honest, we wouldn’t have been able to do this with any amount of success or confidence without our test suite.
Writing tests for code is one of those things that developers really, really don’t want to do. It’s one of the easiest things to cut in the development process, and there’s often a struggle to have developers start writing tests in the first place. One of the best lessons the web has taught us is that we can’t, in good faith, trust the happy path. We must make sure ourselves, and our users, aren’t in a tough spot later on because we only thought of the best case scenarios.
JavaScript
Regardless of your opinion on whether or not everything needs to be built primarily with JavaScript, if you’re choosing to build a JavaScript heavy app, you absolutely should be writing some combination of unit and integration tests.
Unit tests are for testing extremely isolated and small pieces of code, which we refer to as the units themselves. Great for reused functions and small, scoped areas, this is the closest you examine your code with the testing microscope. For example, if we were to build a calculator, the most minute piece we could test could be the basic operations.
/*
* This example uses a test framework called Jasmine
*/
describe("Calculator Operations", function () {
it("Should add two numbers", function () {
// Say we have a calculator
Calculator.init();
// We can run the function that does our addition calculation...
var result = Calculator.addNumbers(7,3);
// ...and ensure we're getting the right output
expect(result).toBe(10);
});
});
Even though these teeny bits work in isolation, we should ensure that connecting the large pieces work, as well. This is where integration tests excel. These tests ensure that two or more different areas of code, that may not directly know about each other, still behave in expected ways. Let’s build upon our calculator - we may want the operations to be saved in memory after a calculation runs. This isn’t as suited for a unit test because there are a few other moving pieces involved in the process (the calculations, checking if the result was an error, etc.).
it(“Should remember the last calculation”, function () {
// Run an operation
Calculator.addNumbers(7,10);
// Expect something else to have happened as a result
expect(Calculator.updateCurrentValue).toHaveBeenCalled();
expect(Calculator.currentValue).toBe(17);
});
Unit and integration tests provide assurance that your hand-rolled JavaScript should, for the most part, never fail in a grand fashion. Although it still might happen, you could be able to catch problems way sooner than without a test suite, and hopefully never push those failures to your production environment.
Interfaces
Regardless of how you’re building something, it most definitely has some kind of interface. Whether you’re using a very barebones structure, or you’re leveraging a whole design system, these things can be tested as well.
Acceptance testing helps us ensure that users can get from point A to point B within our web things, which can provide assurance that major features are always functioning properly. By simulating user input and data entry, we can go through whole user workflows to test for both success and failure scenarios. These are not necessarily for simulating edge-case scenarios, but rather ensuring that our core offerings are stable.
For example, if your site requires signup, you want to make sure the workflow is behaving as expected - allowing valid information to go through signup, while invalid information does not let you progress.
/*
* This example uses Jasmine along with an add-on called jasmine-integration
*/
describe("Acceptance tests", function () {
// Go to our signup page
var page = visit("/signup");
// Fill our signup form with invalid information
page.fill_in("input[name='email']", "Not An Email");
page.fill_in("input[name='name']", "Alicia");
page.click("button[type=submit]");
// Check that we get an expected error message
it("Shouldn't allow signup with invalid information", function () {
expect(page.find("#signupError").hasClass("hidden")).toBeFalsy();
});
// Now, fill our signup form with valid information
page.fill_in("input[name='email']", "thisismyemail@gmail.com");
page.fill_in("input[name='name']", "Gerry");
page.click("button[type=submit]");
// Check that we get an expected success message and the error message is hidden
it("Should allow signup with valid information", function () {
expect(page.find("#signupError").hasClass("hidden")).toBeTruthy();
expect(page.find("#thankYouMessage").hasClass("hidden")).toBeFalsy();
});
});
In terms of visual design, we’re now able to take snapshots of what our interfaces look like before and after any code changes to see what has changed. We call this visual regression testing. Rather than being a pass or fail test like our other examples thus far, this is more of an awareness test, intended to inform developers of all the visual differences that have occurred, intentional or not. Developers may accidentally introduce a styling change or fix that has unintended side effects on other areas of a website - visual regression testing helps us catch these sooner rather than later. These do require a bit more consistent grooming than other tests, but can be valuable in major CSS refactors or if your CSS is generally a bit like Jenga.
Tools like PhantomCSS will take screenshots of your pages, and do a visual comparison to check what has changed between two sets of images. The code would look something like this:
/*
* This example uses PhantomCSS
*/
casper.start("/home").then(function(){
// Initial state of form
phantomcss.screenshot("#signUpForm", "sign up form");
// Hit the sign up button (should trigger error)
casper.click("button#signUp");
// Take a screenshot of the UI component
phantomcss.screenshot("#signUpForm", "sign up form error");
// Fill in form by name attributes & submit
casper.fill("#signUpForm", {
name: "Alicia Sedlock",
email: "alicia@example.com"
}, true);
// Take a second screenshot of success state
phantomcss.screenshot("#signUpForm", "sign up form success");
});
You run this code before starting any development, to create your baseline set of screen captures. After you’ve completed a batch of work, you run PhantomCSS again. This will create a second batch of screenshots, which are then put through an image comparison tool to display any differences that occurred. Say you changed your margins on our form elements – your image diff would look something like this:
This is a great tool for ensuring not just your site retains its expected styling, but it’s also great for ensuring nothing accidentally changes in the living style guide or modular components you may have developed. It’s hard to keep eagle eyes on every visual aspect of your site or app, so visual regression testing helps to keep these things monitored.
Conclusion
The shape and size of what you’re testing for your site or app will vary. You may not need lots of unit or integration tests if you don’t write a lot of JavaScript. You may not need visual regression testing for a one page site. It’s important to assess your codebase to see which tests would provide the most benefit for you and your team.
Writing tests isn’t a joy for most developers, myself included. But I end up thanking Past Alicia a lot when there are tests, because otherwise I would have introduced a lot of issues into codebases. Shipping code that’s broken breaks trust with our users, and it’s our responsibility as developers to make sure that trust isn’t broken. Testing shouldn’t be considered a “nice to have” - it should be an integral piece of our workflow and our day-to-day job. |
2016 |
Alicia Sedlock |
aliciasedlock |
2016-12-03T00:00:00+00:00 |
https://24ways.org/2016/a-favor-for-your-future-self/ |
code |
| 335 |
Naughty or Nice? CSS Background Images |
Web Standards based development involves many things – using semantically sound HTML to provide structure to our documents or web applications, using CSS for presentation and layout, using JavaScript responsibly, and of course, ensuring that all that we do is accessible and interoperable to as many people and user agents as we can.
This we understand to be good.
And it is good.
Except when we don’t clearly think through the full implications of using those techniques.
Which often happens when time is short and we need to get things done.
Here are some naughty examples of CSS background images with their nicer, more accessible counterparts.
Transaction related messages
I’m as guilty of this as others (or, perhaps, I’m the only one that has done this, in which case this can serve as my holiday season confessional) We use lovely little icons to show status messages for a transaction to indicate if the action was successful, or was there a warning or error? For example:
“Your postal/zip code was not in the correct format.”
Notice that we place a nice little icon there, and use background colours and borders to convey a specific message: there was a problem that needs to be fixed. Notice that all of this visual information is now contained in the CSS rules for that div:
<div class="error">
<p>Your postal/zip code was not in the correct format.</p>
</div>
div.error {
background: #ffcccc url(../images/error_small.png) no-repeat 5px 4px;
color: #900;
border-top: 1px solid #c00;
border-bottom: 1px solid #c00;
padding: 0.25em 0.5em 0.25em 2.5em;
font-weight: bold;
}
Using this approach also makes it very easy to create a div.success and div.warning CSS rules meaning we have less to change in our HTML.
Nice, right?
No. Naughty.
Visual design communicates
The CSS is being used to convey very specific information. The choice of icon, the choice of background colour and borders tell us visually that there is something wrong.
With the icon as a background image – there is no way to specify any alt text for the icon, and significant meaning is lost. A screen reader user, for example, misses the fact that it is an “error.”
The solution? Ask yourself: what is the bare minimum needed to indicate there was an error? Currently in the absence of CSS there will be no icon – which (I’m hoping you agree) is critical to communicating there was an error.
The icon should be considered content and not simply presentational.
The borders and background colour are certainly much less critical – they belong in the CSS.
Lets change the code to place the image directly in the HTML and using appropriate alt text to better communicate the meaning of the icon to all users:
<div class="bettererror">
<img src="images/error_small.png" alt="Error" />
<p>Your postal/zip code was not in the correct format.</p>
</div>
div.bettererror {
background-color: #ffcccc;
color: #900;
border-top: 1px solid #c00;
border-bottom: 1px solid #c00;
padding: 0.25em 0.5em 0.25em 2.5em;
font-weight: bold;
position: relative;
min-height: 1.25em;
}
div.bettererror img {
display: block;
position: absolute;
left: 0.25em;
top: 0.25em;
padding: 0;
margin: 0;
}
div.bettererror p {
position: absolute;
left: 2.5em;
padding: 0;
margin: 0;
}
Compare these two examples of transactional messages
Status of a Record
This example is pretty straightforward. Consider the following: a real estate listing on a web site. There are three “states” for a listing: new, normal, and sold. Here’s how they look:
Example of a New Listing
Example of A Sold Listing
If we (forgive the pun) blindly apply the “use a CSS background image” technique we clearly run into problems with the new and sold images – they actually contain content with no way to specify an alternative when placed in the CSS.
In this case of the “new” image, we can use the same strategy as we used in the first example (the transaction result). The “new” image should be considered content and is placed in the HTML as part of the <h2>...</h2> that identifies the listing.
However when considering the “sold” listing, there are less changes to be made to keep the same look by leaving the “SOLD” image as a background image and providing the equivalent information elsewhere in the listing – namely, right in the heading.
For those that can’t see the background image, the status is communicated clearly and right away. A screen reader user that is navigating by heading or viewing a listing will know right away that a particular property is sold.
Of note here is that in both cases (new and sold) placing the status near the beginning of the record helps with a zoom layout as well.
Better Example of A Sold Listing
Summary
Remember: in the holiday season, its what you give that counts!! Using CSS background images is easy and saves time for you but think of the children. And everyone else for that matter…
CSS background images should only be used for presentational images, not for those that contain content (unless that content is already represented and readily available elsewhere). |
2005 |
Derek Featherstone |
derekfeatherstone |
2005-12-20T00:00:00+00:00 |
https://24ways.org/2005/naughty-or-nice-css-background-images/ |
code |
| 239 |
Using the WebFont Loader to Make Browsers Behave the Same |
Web fonts give us designers a whole new typographic palette with which to work. However, browsers handle the loading of web fonts in different ways, and this can lead to inconsistent user experiences.
Safari, Chrome and Internet Explorer leave a blank space in place of the styled text while the web font is loading. Opera and Firefox show text with the default font which switches over when the web font has loaded, resulting in the so-called Flash of Unstyled Text (aka FOUT). Some people prefer Safari’s approach as it eliminates FOUT, others think the Firefox way is more appropriate as content can be read whilst fonts download. Whatever your preference, the WebFont Loader can make all browsers behave the same way.
The WebFont Loader is a JavaScript library that gives you extra control over font loading. It was co-developed by Google and Typekit, and released as open source. The WebFont Loader works with most web font services as well as with self-hosted fonts.
The WebFont Loader tells you when the following events happen as a browser downloads web fonts (or loads them from cache):
when fonts start to download (‘loading’)
when fonts finish loading (‘active’)
if fonts fail to load (‘inactive’)
If your web page requires more than one font, the WebFont Loader will trigger events for individual fonts, and for all the fonts as a whole. This means you can find out when any single font has loaded, and when all the fonts have loaded (or failed to do so).
The WebFont Loader notifies you of these events in two ways: by applying special CSS classes when each event happens; and by firing JavaScript events. For our purposes, we’ll be using just the CSS classes.
Implementing the WebFont Loader
As stated above, the WebFont Loader works with most web font services as well as with self-hosted fonts.
Self-hosted fonts
To use the WebFont Loader when you are hosting the font files on your own server, paste the following code into your web page:
<script type="text/javascript">
WebFontConfig = {
custom: { families: ['Font Family Name', 'Another Font Family'],
urls: [ 'http://yourwebsite.com/styles.css' ] }
};
(function() {
var wf = document.createElement('script');
wf.src = ('https:' == document.location.protocol ? 'https' : 'http') + '://ajax.googleapis.com/ajax/libs/webfont/1/webfont.js';
wf.type = 'text/javascript';
wf.async = 'true';
var s = document.getElementsByTagName('script')[0];
s.parentNode.insertBefore(wf, s);
})();
</script>
Replace Font Family Name and Another Font Family with a comma-separated list of the font families you want to check against, and replace http://yourwebsite.com/styles.css with the URL of the style sheet where your @font-face rules reside.
Fontdeck
Assuming you have added some fonts to a website project in Fontdeck, use the afore-mentioned code for self-hosted solutions and replace http://yourwebsite.com/styles.css with the URL of the <link> tag in your Fontdeck website settings page. It will look something like http://f.fontdeck.com/s/css/xxxx/domain/nnnn.css.
Typekit
Typekit’s JavaScript-based implementation incorporates the WebFont Loader events by default, so you won’t need to include any WebFont Loader code.
Making all browsers behave like Safari
To make Firefox and Opera work in the same way as WebKit browsers (Safari, Chrome, etc.) and Internet Explorer, and thus minimise FOUT, you need to hide the text while the fonts are loading.
While fonts are loading, the WebFont Loader adds a class of wf-loading to the <html> element. Once the fonts have loaded, the wf-loading class is removed and replaced with a class of wf-active (or wf-inactive if all of the fonts failed to load). This means you can style elements on the page while the fonts are loading and then style them differently when the fonts have finished loading.
So, let’s say the text you need to hide while fonts are loading is contained in all paragraphs and top-level headings. By writing the following style rule into your CSS, you can hide the text while the fonts are loading:
.wf-loading h1, .wf-loading p {
visibility:hidden;
}
Because the wf-loading class is removed once the the fonts have loaded, the visibility:hidden rule will stop being applied, and the text revealed. You can see this in action on this simple example page.
That works nicely across the board, but the situation is slightly more complicated. WebKit doesn’t wait for all fonts to load before displaying text: it displays text elements as soon as the relevant font is loaded.
To emulate WebKit more accurately, we need to know when individual fonts have loaded, and apply styles accordingly. Fortunately, as mentioned earlier, the WebFont Loader has events for individual fonts too.
When a specific font is loading, a class of the form wf-fontfamilyname-n4-loading is applied. Assuming headings and paragraphs are styled in different fonts, we can make our CSS more specific as follows:
.wf-fontfamilyname-n4-loading h1,
.wf-anotherfontfamily-n4-loading p {
visibility:hidden;
}
Note that the font family name is transformed to lower case, with all spaces removed. The n4 is a shorthand for the weight and style of the font family. In most circumstances you’ll use n4 but refer to the WebFont Loader documentation for exceptions.
You can see it in action on this Safari example page (you’ll probably need to disable your cache to see any change occur).
Making all browsers behave like Firefox
To make WebKit browsers and Internet Explorer work like Firefox and Opera, you need to explicitly show text while the fonts are loading. In order to make this happen, you need to specify a font family which is not a web font while the fonts load, like this:
.wf-fontfamilyname-n4-loading h1 {
font-family: 'arial narrow', sans-serif;
}
.wf-anotherfontfamily-n4-loading p {
font-family: arial, sans-serif;
}
You can see this in action on the Firefox example page (again you’ll probably need to disable your cache to see any change occur).
And there’s more
That’s just the start of what can be done with the WebFont Loader. More areas to explore would be tweaking font sizes to reduce the impact of reflowing text and to better cater for very narrow fonts. By using the JavaScript events much more can be achieved too, such as fading in text as the fonts load. |
2010 |
Richard Rutter |
richardrutter |
2010-12-02T00:00:00+00:00 |
https://24ways.org/2010/using-the-webfont-loader-to-make-browsers-behave-the-same/ |
code |
| 256 |
Develop Your Naturalist Superpowers with Observable Notebooks and iNaturalist |
We’re going to level up your knowledge of what animals you might see in an area at a particular time of year - a skill every naturalist* strives for - using technology! Using iNaturalist and Observable Notebooks we’re going to prototype seasonality graphs for particular species in an area, and automatically create a guide to what animals you might see in each month.
*(a Naturalist is someone who likes learning about nature, not someone who’s a fan of being naked, that’s a ‘Naturist’… different thing!)
Looking for critters in rocky intertidal habitats
One of my favourite things to do is going rockpooling, or as we call it over here in California, ‘tidepooling’. Amounting to the same thing, it’s going to a beach that has rocks where the tide covers then uncovers little pools of water at different times of the day. All sorts of fun creatures and life can be found in this ‘rocky intertidal habitat’
A particularly exciting creature that lives here is the Nudibranch, a type of super colourful ‘sea slug’. There are over 3000 species of Nudibranch worldwide. (The word “nudibranch” comes from the Latin nudus, naked, and the Greek βρανχια / brankhia, gills.)
They are however quite tricky to find! Even though they are often brightly coloured and interestingly shaped, some of them are very small, and in our part of the world in the Bay Area in California their appearance in our rockpools is seasonal. We see them more often in Summer months, despite the not-as-low tides as in our Winter and Spring seasons.
My favourite place to go tidepooling here is Pillar Point in Half Moon bay (at other times of the year more famously known for the surf competition ‘Mavericks’). The rockpools there are rich in species diversity, of varied types and water-coverage habitat zones as well as being relatively accessible.
I was rockpooling at Pillar Point recently with my parents and we talked to a lady who remarked that she hadn’t seen any Nudibranchs on her visit this time. I realised that having an idea of what species to find where, and at what time of year is one of the many superpower goals of every budding Naturalist.
Using technology and the croudsourced species observations of the iNaturalist community we can shortcut our way to this superpower!
Finding nearby animals with iNaturalist
We’re going to be getting our information about what animals you can see in Pillar Point using iNaturalist. iNaturalist is a really fun platform that helps connect people to nature and report their findings of life in the outdoors. It is also a community of nature-loving people who help each other identify and confirm those observations. iNaturalist is a project run as a joint initiative by the California Academy of Sciences and the National Geographic Society.
I’ve been using iNaturalist for over two years to record and identify plants and animals that I’ve found in the outdoors. I use their iPhone app to upload my pictures, which then uses machine learning algorithms to make an initial guess at what it is I’ve seen. The community is really active, and I often find someone else has verified or updated my species guess pretty soon after posting.
This process is great because once an observation has been identified by at least two people it becomes ‘verified’ and is considered research grade. Research grade observations get exported and used by scientists, as well as being indexed by the Global Biodiversity Information Facility, GBIF.
iNaturalist has a great API and API explorer, which makes interacting and prototyping using iNaturalist data really fun. For example, if you go to the API explorer and expand the Observations : Search and fetch section and then the GET /observations API, you get a selection of input boxes that allow you to play with options that you can then pass to the API when you click the ‘Try it out’ button.
You’ll then get a URL that looks a bit like
https://api.inaturalist.org/v1/observations?captive=false &geo=true&verifiable=true&taxon_id=47113&lat=37.495461&lng=-122.499584 &radius=5&order=desc&order_by=created_at
which you can call and interrrogate using a programming language of your choice.
If you would like to see an all-JavaScript application that uses the iNaturalist API, take a look at OwlsNearMe.com which Simon and I built one weekend earlier this year. It gets your location and shows you all iNaturalist observations of owls near you and lists which species you are likely to see (not adjusted for season).
Rapid development using Observable Notebooks
We’re going to be using Observable Notebooks to prototype our examples, pulling data down from iNaturalist. I really like using visual notebooks like Observable, they are great for learning and building things quickly. You may be familiar with Jupyter notebooks for Python which is similar but takes a bit of setup to get going - I often use these for prototyping too. Observable is amazing for querying and visualising data with JavaScript and since it is a hosted product it doesn’t require any setup at all.
You can follow along and play with this example on my Observable notebook. If you create an account there you can fork my notebook and create your own version of this example.
Each ‘notebook’ consists of a page with a column of ‘cells’, similar to what you get in a spreadsheet. A cell can contain Markdown text or JavaScript code and the output of evaluating the cell appears above the code that generated it. There are lots of tutorials out there on Observable Notebooks, I like this code introduction one from Observable (and D3) creator Mike Bostock.
Developing your Naturalist superpowers
If you have an idea of what plants and critters you might see in a place at the time you visit, you can hone in on what you want to study and train your Naturalist eye to better identify the life around you.
For our example, we care about wildlife we can see at Pillar Point, so we need a way of letting the iNaturalist API know which area we are interested in.
We could use a latitide, longitude and radius for this, but a rectangular bounding box is a better shape for the reef. We can use this tool to draw the area we want to search within: boundingbox.klokantech.com
The tool lets you export the bounding box in several forms using the dropdown at the bottom left under the map givese We are going to use the ‘DublinCore’ format as it’s closest to the format needed by the iNaturalist API.
westlimit=-122.50542; southlimit=37.492805; eastlimit=-122.492738; northlimit=37.499811
A quick map primer:
The higher the latitude the more north it is
The lower the latitude the more south it is
Latitude 0 = the equator
The higher the longitude the more east it is of Greenwich
The lower the longitude the more west it is of Greenwich
Longitude 0 = Greenwich
In the iNaturalst API we want to use the parameters nelat, nelng, swlat, swlng to create a query that looks inside a bounding box of Pillar Point near Half Moon Bay in California:
nelat = highest latitude = north limit = 37.499811
nelng = highest longitude = east limit = -122.492738
swlat = smallest latitude = south limit = 37.492805
swlng = smallest longitude = west limit = 122.50542
As API parameters these look like this:
?nelat=37.499811&nelng=-122.492738&swlat=37.492805&swlng=122.50542
These parameters in this format can be used for most of the iNaturalist API methods.
Nudibranch seasonality in Pillar Point
We can use the iNaturalist observation_histogram API to get a count of Nudibranch observations per week-of-year across all time and within our Pillar Point bounding box.
In addition to the geographic parameters that we just worked out, we are also sending the taxon_id of 47113, which is iNaturalists internal number associated with the Nudibranch taxon. By using this we can get all species which are under the parent ‘Order Nudibranchia’.
Another useful piece of naturalist knowledge is understanding the biological classification scheme of Taxanomic Rank - roughly, when a species has a Latin name of two words eg ‘Glaucus Atlanticus’ the first Latin word is the ‘Genus’ like a family name ‘Glaucus’, and the second word identifies that particular species, like a given name ‘Atlanticus’.
The two Latin words together indicate a specific species, the term we use colloquially to refer to a type of animal often differs wildly region to region, and sometimes the same common name in two countries can refer to two different species. The common names for the Glaucus Atlanticus (which incidentally is my favourite sea slug) include: sea swallow, blue angel, blue glaucus, blue dragon, blue sea slug and blue ocean slug! Because this gets super confusing, Scientists like using this Latin name format instead.
The following piece of code asks the iNaturalist Histogram API to return per-week counts for verified observations of Nudibranchs within our Pillar Point bounding box:
pillar_point_counts_per_week = fetch(
"https://api.inaturalist.org/v1/observations/histogram?taxon_id=47113&nelat=37.499811&nelng=-122.492738&swlat=37.492805&swlng=-122.50542&date_field=observed&interval=week_of_year&verifiable=true"
).then(response => {
return response.json();
})
Our next step is to take this data and draw a graph! We’ll be using Vega-Lite for this, which is a fab JavaScript graphing libary that is also easy and fun to use with Observable Notebooks.
(Here is a great tutorial on exploring data and drawing graphs with Observable and Vega-Lite)
The iNaturalist API returns data that looks like this:
{
"total_results": 53,
"page": 1,
"per_page": 53,
"results": {
"week_of_year": {
"1": 136,
"2": 20,
"3": 150,
"4": 65,
"5": 186,
"6": 74,
"7": 47,
"8": 87,
"9": 64,
"10": 56,
But for our Vega-Lite graph we need data that looks like this:
[{
"week": "01",
"value": 136
}, {
"week": "02",
"value": 20
}, ...]
We can convert what we get back from the API to the second format using a loop that iterates over the object keys:
objects_to_plot = {
let objects = [];
Object.keys(pillar_point_counts_per_week.results.week_of_year).map(function(week_index) {
objects.push({
week: `Wk ${week_index.toString()}`,
observations: pillar_point_counts_per_week.results.week_of_year[week_index]
});
})
return objects;
}
We can then plug this into Vega-Lite to draw us a graph:
vegalite({
data: {values: objects_to_plot},
mark: "bar",
encoding: {
x: {field: "week", type: "nominal", sort: null},
y: {field: "observations", type: "quantitative"}
},
width: width * 0.9
})
It’s worth noting that we have a lot of observations of Nudibranchs particularly at Pillar Point due in no small part to the intertidal monitoring research that Alison Young and Rebecca Johnson facilitate for the California Achademy of Sciences.
So, what if we want to look for the seasonality of observations of a particular species of adorable sea slug? We want our interface to have a select box with a list of all the species you might find at any time of year. We can do this using the species_counts API to create us an object with the iNaturalist species ID and common & Latin names.
pillar_point_nudibranches = {
let api_results = await fetch(
"https://api.inaturalist.org/v1/observations/species_counts?taxon_id=47113&nelat=37.499811&nelng=-122.492738&swlat=37.492805&swlng=-122.50542&date_field=observed&verifiable=true"
).then(r => r.json())
let species_list = api_results.results.map(i => ({
value: i.taxon.id,
label: `${i.taxon.preferred_common_name} (${i.taxon.name})`
}));
return species_list
}
We can create an interactive select box by importing code from Jeremy Ashkanas’ Observable Notebook: add import {select} from "@jashkenas/inputs" to a cell anywhere in our notebook. Observable is magic: like a spreadsheet, the order of the cells doesn’t matter - if one cell is referenced by any other cell then when that cell updates all the other cells refresh themselves. You can also import and reference one notebook from another!
viewof select_species = select({
title: "Which Nudibranch do you want to see seasonality for?",
options: [{value: "", label: "All the Nudibranchs!"}, ...pillar_point_nudibranches],
value: ""
})
Then we go back to our old favourite, the histogram API just like before, only this time we are calling it with the value created by our select box ${select_species} as taxon_id instead of the number 47113.
pillar_point_counts_per_month_per_species = fetch(
`https://api.inaturalist.org/v1/observations/histogram?taxon_id=${select_species}&nelat=37.499811&nelng=-122.492738&swlat=37.492805&swlng=-122.50542&date_field=observed&interval=month_of_year&verifiable=true`
).then(r => r.json())
Now for the fun graph bit! As we did before, we re-format the result of the API into a format compatible with Vega-Lite:
objects_to_plot_species_month = {
let objects = [];
Object.keys(pillar_point_counts_per_month_per_species.results.month_of_year).map(function(month_index) {
objects.push({
month: (new Date(2018, (month_index - 1), 1)).toLocaleString("en", {month: "long"}),
observations: pillar_point_counts_per_month_per_species.results.month_of_year[month_index]
});
})
return objects;
}
(Note that in the above code we are creating a date object with our specific month in, and using toLocalString() to get the longer English name for the month. Because the JavaScript Date object counts January as 0, we use month_index -1 to get the correct month)
And we draw the graph as we did before, only now if you interact with the select box in Observable the graph will dynamically update!
vegalite({
data: {values: objects_to_plot_species_month},
mark: "bar",
encoding: {
x: {field: "month", type: "nominal", sort:null},
y: {field: "observations", type: "quantitative"}
},
width: width * 0.9
})
Now we can see when is the best time of year to plan to go tidepooling in Pillar Point if we want to find a specific species of Nudibranch.
This tool is great for planning when we to go rockpooling at Pillar Point, but what about if you are going this month and want to pre-train your eye with what to look for in order to impress your friends with your knowledge of Nudibranchs?
Well… we can create ourselves a dynamic guide that you can with a list of the species, their photo, name and how many times they have been observed in that month of the year!
Our select box this time looks as follows, simpler than before but assigning the month value to the variable selected_month.
viewof selected_month = select({
title: "When do you want to see Nudibranchs?",
options: [
{ label: "Whenever", value: "" },
{ label: "January", value: "1" },
{ label: "February", value: "2" },
{ label: "March", value: "3" },
{ label: "April", value: "4" },
{ label: "May", value: "5" },
{ label: "June", value: "6" },
{ label: "July", value: "7" },
{ label: "August", value: "8" },
{ label: "September", value: "9" },
{ label: "October", value: "10" },
{ label: "November", value: "11" },
{ label: "December", value: "12" },
],
value: ""
})
We then can use the species_counts API to get all the relevant information about which species we can see in month=${selected_month}. We’ll be able to reference this response object and its values later with the variable we just created, eg: all_species_data.results[0].taxon.name.
all_species_data = fetch(
`https://api.inaturalist.org/v1/observations/species_counts?taxon_id=47113&month=${selected_month}&nelat=37.499811&nelng=-122.492738&swlat=37.492805&swlng=-122.50542&verifiable=true`
).then(r => r.json())
You can render HTML directly in a notebook cell using Observable’s html tagged template literal:
<style>
.collection { margin-top: 2em }
.collection .species { display: inline-block; width: 9em; margin-bottom: 2em; }
.collection .species-name { font-size: 1em; margin: 0; padding: 0 }
.collection .species-count { margin: 0 0 0.3em 0; padding: 0; font-size: 0.75em; color: #999; font-style: italic; }
.collection img { display: block; width: 100% }
.collection select { font-size: 1.5em; }
</style>
<h2>If you go to Pillar Point ${
{"": "",
"1":"in January",
"2":"in Febrary",
"3":"in March",
"4":"in April",
"5":"in May",
"6":"in June",
"7":"in July",
"8":"in August",
"9":"in September",
"10":"in October",
"11":"in November",
"12":"in December",
}[selected_month]
} you might see…</h2>
<div class="collection">
${all_species_data.results.map(s => `<div class="species"><h3 class="species-name">${s.taxon.name}</h3>
<p class="species-count">Seen ${s.count} times</p>
<img src="${s.taxon.default_photo.medium_url}"></div>
`)}
</div>
These few lines of HTML are all you need to get this exciting dynamic guide to what Nudibranchs you will see in each month!
Play with it yourself in this Observable Notebook.
Conclusion
I hope by playing with these examples you have an idea of how powerful it can be to prototype using Observable Notebooks and how you can use the incredible crowdsourced community data and APIs from iNaturalist to augment your naturalist skills and impress your friends with your new ‘knowledge of nature’ superpower.
Lastly I strongly encourage you to get outside on a low tide to explore your local rocky intertidal habitat, and all the amazing critters that live there.
Here is a great introduction video to tidepooling / rockpooling, by Rebecca Johnson and Alison Young from the California Academy of Sciences. |
2018 |
Natalie Downe |
nataliedowne |
2018-12-18T00:00:00+00:00 |
https://24ways.org/2018/observable-notebooks-and-inaturalist/ |
code |
| 71 |
Upping Your Web Security Game |
When I started working in web security fifteen years ago, web development looked very different. The few non-static web applications were built using a waterfall process and shipped quarterly at best, making it possible to add security audits before every release; applications were deployed exclusively on in-house servers, allowing Info Sec to inspect their configuration and setup; and the few third-party components used came from a small set of well-known and trusted providers. And yet, even with these favourable conditions, security teams were quickly overwhelmed and called for developers to build security in.
If the web security game was hard to win before, it’s doomed to fail now. In today’s web development, every other page is an application, accepting inputs and private data from users; software is built continuously, designed to eliminate manual gates, including security gates; infrastructure is code, with servers spawned with little effort and even less security scrutiny; and most of the code in a typical application is third-party code, pulled in through open source repositories with rarely a glance at who provided them.
Security teams, when they exist at all, cannot solve this problem. They are vastly outnumbered by developers, and cannot keep up with the application’s pace of change. For us to have a shot at making the web secure, we must bring security into the core. We need to give it no less attention than that we give browser compatibility, mobile design or web page load times. More broadly, we should see security as an aspect of quality, expecting both ourselves and our peers to address it, and taking pride when we do it well.
Where To Start?
Embracing security isn’t something you do overnight.
A good place to start is by reviewing things you’re already doing – and trying to make them more secure. Here are three concrete steps you can take to get going.
HTTPS
Threats begin when your system interacts with the outside world, which often means HTTP. As is, HTTP is painfully insecure, allowing attackers to easily steal and manipulate data going to or from the server. HTTPS adds a layer of crypto that ensures the parties know who they’re talking to, and that the information exchanged can be neither modified nor sniffed.
HTTPS is relevant to any site. If your non-HTTPS site holds opinions, reading it may get your users in trouble with employers or governments. If your users believe what you say, attackers can modify your non-HTTPS to take advantage of and abuse that trust. If you want to use new browser technologies like HTTP2 and service workers, your site will need to be HTTPS. And if you want to be discovered on the web, using HTTPS can help your Google ranking. For more details on why I think you should make the switch to HTTPS, check out this post, these slides and this video.
Using HTTPS is becoming easier and cheaper. Here are a few free tools that can help:
Get free and easy HTTPS delivery from Cloudflare (be sure to use “Full SSL”!)
Get a free and automation-friendly certificate from Let’s Encrypt (now in open beta).
Test how well your HTTPS is set up using SSLTest.
Other vendors and platforms are rapidly simplifying and reducing the cost of their HTTPS offering, as demand and importance grows.
Two-Factor Authentication
The most sensitive data is usually stored behind a login, and the authentication process is the primary gate in front of this data. Making this process secure has many aspects, including using HTTPS when accepting credentials, having a strong password policy, never storing the password, and more.
All of these are important, but the best single step to boost your authentication security is to introduce two-factor authentication (2FA). Adding 2FA usually means prompting users for an additional one-time code when logging in, which they get via SMS or a mobile app (e.g. Google Authenticator). This code is short-lived and is extremely hard for a remote attacker to guess, thus vastly reducing the risk a leaked or easily guessed password presents.
The typical algorithm for 2FA is based on an IETF standard called the time-based one-time password (TOTP) algorithm, and it isn’t that hard to implement. Joel Franusic wrote a great post on implementing 2FA; modules like speakeasy make it even easier; and you can swap SMS with Google Authenticator or your own app if you prefer. If you don’t want to build 2FA support yourself, you can purchase two/multi-factor authentication services from vendors such as DuoSecurity, Auth0, Clef, Hypr and others.
If implementing 2FA still feels like too much work, you can also choose to offload your entire authentication process to an OAuth-based federated login. Many companies offer this today, including Facebook, Google, Twitter, GitHub and others. These bigger players tend to do authentication well and support 2FA, but you should consider what data you’re sharing with them in the process.
Tracking Known Vulnerabilities
Most of the code in a modern application was actually written by third parties, and pulled into your app as frameworks, modules and libraries. While using these components makes us much more productive, along with their functionality we also adopt their security flaws. To make things worse, some of these flaws are well-known vulnerabilities, making it easy for hackers to take advantage of them in an attack.
This is a real problem and happens on pretty much every platform. Do you develop in Java? In 2014, over 6% of Java modules downloaded from Maven had a known severe security issue, the typical Java applications containing 24 flaws. Are you coding in Node.js? Roughly 14% of npm packages carry a known vulnerability, and over 60% of dev shops find vulnerabilities in their code. 30% of Docker Hub containers include a high priority known security hole, and 60% of the top 100,000 websites use client-side libraries with known security gaps.
To find known security issues, take stock of your dependencies and match them against language-specific lists such as Snyk’s vulnerability DB for Node.js, rubysec for Ruby, victims-db for Python and OWASP’s Dependency Check for Java. Once found, you can fix most issues by upgrading the component in question, though that may be tricky for indirect dependencies.
This process is still way too painful, which means most teams don’t do it. The Snyk team and I are hoping to change that by making it as easy as possible to find, fix and monitor known vulnerabilities in your dependencies. Snyk’s wizard will help you find and fix these issues through guided upgrades and patches, and adding Snyk’s test to your continuous integration and deployment (CI/CD) will help you stay secure as your code evolves.
Note that newly disclosed vulnerabilities usually impact old code – the one you’re running in production. This means you have to stay alert when new vulnerabilities are disclosed, so you can fix them before attackers can exploit them. You can do so by subscribing to vulnerability lists like US-CERT, OSVDB and NVD. Snyk’s monitor will proactively let you know about new disclosures relevant to your code, but only for Node.js for now – you can register to get updated when we expand.
Securing Yourself
In addition to making your application secure, you should make the contributors to that application secure – including you. Earlier this year we’ve seen attackers target mobile app developers with a malicious Xcode. The real target, however, wasn’t these developers, but rather the users of the apps they create. That you create. Securing your own work environment is a key part of keeping your apps secure, and your users from being compromised.
There’s no single step that will make you fully secure, but here are a few steps that can make a big impact:
Use 2FA on all the services related to the application, notably source control (e.g. GitHub), cloud platform (e.g. AWS), CI/CD, CDN, DNS provider and domain registrar. If an attacker compromises any one of those, they could modify or replace your entire application. I’d recommend using 2FA on all your personal services too.
Use a password manager (e.g. 1Password, LastPass) to ensure you have a separate and complex password for each service. Some of these services will get hacked, and passwords will leak. When that happens, don’t let the attackers access your other systems too.
Secure your workstation. Be careful what you download, lock your screen when you walk away, change default passwords on services you install, run antivirus software, etc. Malware on your machine can translate to malware in your applications.
Be very wary of phishing. Smart attackers use ‘spear phishing’ techniques to gain access to specific systems, and can trick even security savvy users. There are even phishing scams targeting users with 2FA. Be alert to phishy emails.
Don’t install things through curl <somewhere-on-the-web> | sudo bash, especially if the URL is on GitHub, meaning someone else controls it. Don’t do it on your machines, and definitely don’t do it in your CI/CD systems. Seriously.
Staying secure should be important to you personally, but it’s doubly important when you have privileged access to an application. Such access makes you a way to reach many more users, and therefore a more compelling target for bad actors.
A Culture of Security
Using HTTPS, enabling two-factor authentication and fixing known vulnerabilities are significant steps in building security at your core. As you implement them, remember that these are just a few steps in a longer journey.
The end goal is to embrace security as an aspect of quality, and accept we all share the responsibility of keeping ourselves – and our users – safe. |
2015 |
Guy Podjarny |
guypodjarny |
2015-12-11T00:00:00+00:00 |
https://24ways.org/2015/upping-your-web-security-game/ |
code |
| 235 |
Real Animation Using JavaScript, CSS3, and HTML5 Video |
When I was in school to be a 3-D animator, I read a book called Timing for Animation. Though only 152 pages long, it’s essentially the bible for anyone looking to be a great animator. In fact, Pixar chief creative officer John Lasseter used the first edition as a reference when he was an animator at Walt Disney Studios in the early 1980s.
In the book, authors John Halas and Harold Whitaker advise:
Timing is the part of animation which gives meaning to movement. Movement can easily be achieved by drawing the same thing in two different positions and inserting a number of other drawings between the two. The result on the screen will be movement; but it will not be animation.
But that’s exactly what we’re doing with CSS3 and JavaScript: we’re moving elements, not animating them. We’re constantly specifying beginning and end states and allowing the technology to interpolate between the two. And yet, it’s the nuances within those middle frames that create the sense of life we’re looking for.
As bandwidth increases and browser rendering grows more consistent, we can create interactions in different ways than we’ve been able to before. We’re encountering motion more and more on sites we’d generally label ‘static.’ However, this motion is mostly just movement, not animation. It’s the manipulation of an element’s properties, most commonly width, height, x- and y-coordinates, and opacity.
So how do we create real animation?
The metaphor
In my experience, animation is most believable when it simulates, exaggerates, or defies the real world. A bowling ball falls differently than a racquetball. They each have different weights and sizes, which affect the way they land, bounce, and impact other objects.
This is a major reason that JavaScript animation frequently feels mechanical; it doesn’t complete a metaphor. Expanding and collapsing a <div> feels very different than a opening a door or unfolding a piece of paper, but it often shouldn’t. The interaction itself should tie directly to the art direction of a page.
Physics
Understanding the physics of a situation is key to creating convincing animation, even if your animation seeks to defy conventional physics. Isaac Newton’s first law of motion’s_laws_of_motion states, “Every body remains in a state of rest or uniform motion (constant velocity) unless it is acted upon by an external unbalanced force.” Once a force acts upon an object, the object’s shape can change accordingly, depending on the strength of the force and the mass of the object. Another nugget of wisdom from Halas and Whitaker:
All objects in nature have their own weight, construction, and degree of flexibility, and therefore each behaves in its own individual way when a force acts upon it. This behavior, a combination of position and timing, is the basis of animation. The basic question which an animator is continually asking himself is this: “What will happen to this object when a force acts upon it?” And the success of his animation largely depends on how well he answers this question.
In animating with CSS3 and JavaScript, keep physics in mind. How ‘heavy’ is the element you’re interacting with? What kind of force created the action? A gentle nudge? A forceful shove? These subtleties will add a sense of realism to your animations and make them much more believable to your users.
Misdirection
Magicians often use misdirection to get their audience to focus on one thing rather than another. They fool us into thinking something happened that actually didn’t.
Animation is the same, especially on a screen. By changing the arrangement of pixels on screen at a fast enough rate, your eyes fool your mind into thinking an object is actually in motion.
Another important component of misdirecting in animation is the use of multiple objects. Try to recall a cartoon where a character vanishes. More often, the character makes some sort of exaggerated motion (this is called anticipation) then disappears, and a puff a smoke follows. That smoke is an extra element, but it goes a long way into make you believe that character actually disappeared.
Very rarely does a vanishing character’s opacity simply go from one hundred per cent to zero. That’s not believable. So why do we do it with <div>s?
Armed with the ammunition of metaphors and misdirection, let’s code an example.
Shake, rattle, and roll
(These demos require at least a basic understanding of jQuery and CSS3. Run away if your’re afraid, or brush up on CSS animation and resources for learning jQuery. Also, these demos use WebKit-specific features and are best viewed in the latest version of Safari, so performance in other browsers may vary.)
We often see the design pattern of clicking a link to reveal content. Our “first demo”:”/examples/2010/real-animation/demo1/ shows us exactly that. It uses jQuery’s “ slideDown()”:http://api.jquery.com/slideDown/ method, as many instances do.
But what force acted on the <div> that caused it to open? Did pressing the button unlatch some imaginary hook? Did it activate an unlocking sequence with some gears?
Take 2
Our second demo is more explicit about what happens: the button fell on the <div> and shook its content loose. Here’s how it’s done.
function clickHandler(){
$('#button').addClass('animate');
return false;
}
Clicking the link adds a class of animate to our button. That class has the following CSS associated with it:
<style>
.animate {
-webkit-animation-name: ANIMATE;
-webkit-animation-duration: 0.25s;
-webkit-animation-iteration-count: 1;
-webkit-animation-timing-function: ease-in;
}
@-webkit-keyframes ANIMATE {
from {
top: 72px;
}
to {
top: 112px;
}
}
</style>
In our keyframe definition, we’ve specified from and to states. This is great, because we can be explicit about how an object starts and finishes moving.
What’s also extra handy is that these CSS keyframes broadcast events that you can react to with JavaScript. In this example, we’re listening to the webkitAnimationEnd event and opening the <div> only when the sequence is complete. Here’s that code.
function attachAnimationEventHandlers(){
var wrap = document.getElementById('wrap');
wrap.addEventListener('webkitAnimationEnd', function($e) {
switch($e.animationName){
case "ANIMATE" :
openMain();
break;
default:
}
}, false);
}
function openMain(){
$('#main .inner').slideDown('slow');
}
(For more info on handling animation events, check out the documentation at the Safari Reference Library.)
Take 3
The problem with the previous demo is that the subtleties of timing aren’t evident. It still feels a bit choppy.
For our third demo, we’ll use percentages instead of keywords so that we can insert as many points as we need to communicate more realistic timing. The percentages allow us to add the keys to well-timed animation: anticipation, hold, release, and reaction.
<style>
@-webkit-keyframes ANIMATE {
0% {
top: 72px;
}
40% { /* anticipation */
top: 57px;
}
70% { /* hold */
top: 56px;
}
80% { /* release */
top: 112px;
}
100% { /* return */
top: 72px;
}
}
</style>
Take 4
The button animation is starting to feel much better, but the reaction of the <div> opening seems a bit slow.
This fourth demo uses jQuery’s delay() method to time the opening precisely when we want it. Since we know the button’s animation is one second long and its reaction starts at eighty per cent of that, that puts our delay at 800ms (eighty per cent of one second). However, here’s a little pro tip: let’s start the opening at 750ms instead. The extra fifty milliseconds makes it feel more like the opening is a reaction to the exact hit of the button. Instead of listening for the webkitAnimationEnd event, we can start the opening as soon as the button is clicked, and the movement plays on the specified delay.
function clickHandler(){
$('#button').addClass('animate');
openMain();
return false;
}
function openMain(){
$('#main .inner').delay(750).slideDown('slow');
}
Take 5
We can tweak the timing of that previous animation forever, but that’s probably as close as we’re going to get to realistic animation with CSS and JavaScript. However, for some extra sauce, we could relegate the whole animation in our final demo to a video sequence which includes more nuances and extra elements for misdirection.
Here’s the basis of video replacement. Add a <video> element to the page and adjust its opacity to zero. Once the button is clicked, fade the button out and start playing the video. Once the video is finished playing, fade it out and bring the button back.
function clickHandler(){
if($('#main .inner').is(':hidden')){
$('#button').fadeTo(100, 0);
$('#clickVideo').fadeTo(100, 1, function(){
var clickVideo = document.getElementById('clickVideo');
clickVideo.play();
setTimeout(removeVideo, 2400);
openMain();
});
}
return false;
}
function removeVideo(){
$('#button').fadeTo(500, 1);
$('#clickVideo').fadeOut('slow');
}
function openMain(){
$('#main .inner').delay(1100).slideDown('slow');
}
Wrapping up
I’m no JavaScript expert by any stretch. I’m sure a lot of you scripting wizards out there could write much cleaner and more efficient code, but I hope this gives you an idea of the theory behind more realistic motion with the technology we’re using most. This is just one model of creating more convincing animation, but you can create countless variations of this, including…
Exporting <video> animations in 3-D animation tools or 2-D animation tools like Flash or After Effects
Using <canvas> or SVG instead of <video>
Employing specific JavaScript animation frameworks
Making use of all the powerful properties of CSS Transforms and CSS Animation
Trying out emerging CSS3 animation tools like Sencha Animator
If it wasn’t already apparent, these demos show an exaggerated example and probably aren’t practical in a lot of environments. However, there are a handful of great sites out there that honor animation techniques—metaphor, physics, and misdirection, among others—like Benjamin De Cock’s vCard, 20 Things I Learned About Browsers and the Web by Fantasy Interactive, and the Nike Snowboarding site by Ian Coyle and HEGA. They’re wonderful testaments to what you can do to aid interaction for users.
My goal was to show you the ‘why’ and the ‘how.’ Your charge is to discern the ‘where’ and the ‘when.’ Happy animating! |
2010 |
Dan Mall |
danmall |
2010-12-15T00:00:00+00:00 |
https://24ways.org/2010/real-animation-using-javascript-css3-and-html5-video/ |
code |
| 300 |
Taking Device Orientation for a Spin |
When The Police sang “Don’t Stand So Close To Me” they weren’t talking about using a smartphone to view a panoramic image on Facebook, but they could have been. For years, technology has driven relentlessly towards devices we can carry around in our pockets, and now that we’re there, we’re expected to take the thing out of our pocket and wave it around in front of our faces like a psychotic donkey in search of its own dangly carrot.
But if you can’t beat them, join them.
A brave new world
A couple of years back all sorts of specs for new HTML5 APIs sprang up much to our collective glee. Emboldened, we ran a few tests and found they basically didn’t work in anything and went off disheartened into the corner for a bit of a sob.
Turns out, while we were all busy boohooing, those browser boffins have actually being doing some work, and lo and behold, some of these APIs are even half usable. Mostly literally half usable—we’re still talking about browsers, after all.
Now, of course they’re all a bit JavaScripty and are going to involve complex methods and maths and science and probably about a thousand dependancies from Github that will fall out of fashion while we’re still trying to locate the documentation, right? Well, no!
So what if we actually wanted to use one of these APIs, say to impress our friends with our ability to make them wave their phones in front of their faces (because no one enjoys looking hapless more than the easily-technologically-impressed), how could we do something like that? Let’s find out.
The Device Orientation API
The phone-wavy API is more formally known as the DeviceOrientation Event Specification. It does a bunch of stuff that basically doesn’t work, but also gives us three values that represent orientation of a device (a phone, a tablet, probably not a desktop computer) around its x, y and z axes. You might think of it as pitch, roll and yaw if you like to spend your weekends wearing goggles and a leather hat.
The main way we access these values is through an event listener, which can inform our code every time the value changes. Which is constantly, because you try and hold a phone still and then try and hold the Earth still too.
The API calls those pitch, roll and yaw values alpha, beta and gamma. Chocks away:
window.addEventListener('deviceorientation', function(e) {
console.log(e.alpha);
console.log(e.beta);
console.log(e.gamma);
});
If you look at this test page on your phone, you should be able to see the numbers change as you twirl the thing around your body like the dance partner you never had. Wrist strap recommended.
One important note
Like may of these newfangled APIs, Device Orientation is only available over HTTPS. We’re not allowed to have too much fun without protection, so make sure that you’re working on a secure line. I’ve found a quick and easy way to share my local dev environment over TLS with my devices is to use an ngrok tunnel.
ngrok http -host-header=rewrite mylocaldevsite.dev:80
ngrok will then set up a tunnel to your dev site with both HTTP and HTTPS URL options. You, of course, want the HTTPS option.
Right, where were we?
Make something to look at
It’s all well and good having a bunch of numbers, but they’re no use unless we do something with them. Something creative. Something to inspire the generations. Or we could just build that Facebook panoramic image viewer thing (because most of us are familiar with it and we’re not trying to be too clever here). Yeah, let’s just build one of those.
Our basic framework is going to be similar to that used for an image carousel. We have a container, constrained in size, and CSS overflow property set to hidden. Into this we place our wide content and use positioning to move the content back and forth behind the ‘window’ so that the part we want to show is visible.
Here it is mocked up with a slider to set the position. When you release the slider, the position updates. (This actually tests best on desktop with your window slightly narrowed.)
The details of the slider aren’t important (we’re about to replace it with phone-wavy goodness) but the crucial part is that moving the slider results in a function call to position the image. This takes a percentage value (0-100) with 0 being far left and 100 being far right (or ‘alt-nazi’ or whatever).
var position_image = function(percent) {
var pos = (img_W / 100)*percent;
img.style.transform = 'translate(-'+pos+'px)';
};
All this does is figure out what that percentage means in terms of the image width, and set the transform: translate(…); CSS property to move the image. (We use translate because it might be a bit faster to animate than left/right positioning.)
Ok. We can now read the orientation values from our device, and we can programatically position the image. What we need to do is figure out how to convert those raw orientation values into a nice tidy percentage to pass to our function and we’re done. (We’re so not done.)
The maths bit
If we go back to our raw values test page and make-believe that we have a fascinating panoramic image of some far-off beach or historic monument to look at, you’ll note that the main value that is changing as we swing back and forth is the ‘alpha’ value. That’s the one we want to track.
As our goal here is hey, these APIs are interesting and fun and not let’s build the world’s best panoramic image viewer, we’ll start by making a few assumptions and simplifications:
When the image loads, we’ll centre the image and take the current nose-forward orientation reading as the middle.
Moving left, we’ll track to the left of the image (lower percentage).
Moving right, we’ll track to the right (higher percentage).
If the user spins round, does cartwheels or loads the page then hops on a plane and switches earthly hemispheres, they’re on their own.
Nose-forward
When the page loads, the initial value of alpha gives us our nose-forward position. In Safari on iOS, this is normalised to always be 0, whereas most everywhere else it tends to be bound to pointy-uppy north. That doesn’t really matter to us, as we don’t know which direction the user might be facing in anyway — we just need to record that initial state and then use it to compare any new readings.
var initial_position = null;
window.addEventListener('deviceorientation', function(e) {
if (initial_position === null) {
initial_position = Math.floor(e.alpha);
};
var current_position = initial_position - Math.floor(e.alpha);
});
(I’m rounding down the values with Math.floor() to make debugging easier - we’ll take out the rounding later.)
We get our initial position if it’s not yet been set, and then calculate the current position as a difference between the new value and the stored one.
These values are weird
One thing you need to know about these values, is that they range from 0 to 360 but then you also get weird left-of-zero values like -2 and whatever. And they wrap past 360 back to zero as you’d expect if you do a forward roll.
What I’m interested in is working out my rotation. If 0 is my nose-forward position, I want a positive value as I turn right, and a negative value as I turn left. That puts the awkward 360-tipping point right behind the user where they can’t see it.
var rotation = current_position;
if (current_position > 180) rotation = current_position-360;
Which way up?
Since we’re talking about orientation, we need to remember that the values are going to be different if the device is held in portrait on landscape mode. See for yourself - wiggle it like a steering wheel and you get different values. That’s easy to account for when you know which way up the device is, but in true browser style, the API for that bit isn’t well supported. The best I can come up with is:
var screen_portrait = false;
if (window.innerWidth < window.innerHeight) {
screen_portrait = true;
}
It works. Then we can use screen_portrait to branch our code:
if (screen_portrait) {
if (current_position > 180) rotation = current_position-360;
} else {
if (current_position < -180) rotation = 360+current_position;
}
Here’s the code in action so you can see the values for yourself. If you change screen orientation you’ll need to refresh the page (it’s a demo!).
Limiting rotation
Now, while the youth of today are rarely seen without a phone in their hands, it would still be unreasonable to ask them to spin through 360° to view a photo. Instead, we need to limit the range of movement to something like 60°-from-nose in either direction and normalise our values to pan the entire image across that 120° range. -60 would be full-left (0%) and 60 would be full-right (100%).
If we set max_rotation = 60, that code ends up looking like this:
if (rotation > max_rotation) rotation = max_rotation;
if (rotation < (0-max_rotation)) rotation = 0-max_rotation;
var percent = Math.floor(((rotation + max_rotation)/(max_rotation*2))*100);
We should now be able to get a rotation from -60° to +60° expressed as a percentage. Try it for yourself.
The big reveal
All that’s left to do is pass that percentage to our image positioning function and would you believe it, it might actually work.
position_image(percent);
You can see the final result and take it for a spin. Literally.
So what have we made here? Have we built some highly technical panoramic image viewer to aid surgeons during life-saving operations using only JavaScript and some slightly questionable mathematics? No, my friends, we have not. Far from it.
What we have made is progress. We’ve taken a relatively newly available hardware API and a bit of simple JavaScript and paired it with existing CSS knowledge and made something that we didn’t have this morning. Something we probably didn’t even want this morning. Something that if you take a couple of steps back and squint a bit might be a prototype for something vaguely interesting. But more importantly, we’ve learned that our browsers are just a little bit more capable than we thought.
The web platform is maturing rapidly. There are new, relatively unexplored APIs for doing all sorts of crazy thing that are often dismissed as the preserve of native apps. Like some sort of app marmalade. Poppycock.
The web is an amazing, exciting place to create things. All it takes is some base knowledge of the fundamentals, a creative mind and a willingness to learn. We have those! So let’s create things. |
2016 |
Drew McLellan |
drewmclellan |
2016-12-24T00:00:00+00:00 |
https://24ways.org/2016/taking-device-orientation-for-a-spin/ |
code |
| 181 |
Working With RGBA Colour |
When Tim and I were discussing the redesign of this site last year, one of the clear goals was to have a graphical style without making the pages heavy with a lot of images. When we launched, a lot of people were surprised that the design wasn’t built with PNGs. Instead we’d used RGBA colour values, which is part of the CSS3 specification.
What is RGBA Colour?
We’re all familiar with specifying colours in CSS using by defining the mix of red, green and blue light required to achieve our tone. This is fine and dandy, but whatever values we specify have one thing in common — the colours are all solid, flat, and well, a bit boring.
Flat RGB colours
CSS3 introduces a couple of new ways to specify colours, and one of those is RGBA. The A stands for Alpha, which refers to the level of opacity of the colour, or to put it another way, the amount of transparency. This means that we can set not only the red, green and blue values, but also control how much of what’s behind the colour shows through. Like with layers in Photoshop.
Don’t We Have Opacity Already?
The ability to set the opacity on a colour differs subtly from setting the opacity on an element using the CSS opacity property. Let’s look at an example.
Here we have an H1 with foreground and background colours set against a page with a patterned background.
Heading with no transparency applied
h1 {
color: rgb(0, 0, 0);
background-color: rgb(255, 255, 255);
}
By setting the CSS opacity property, we can adjust the transparency of the entire element and its contents:
Heading with 50% opacity on the element
h1 {
color: rgb(0, 0, 0);
background-color: rgb(255, 255, 255);
opacity: 0.5;
}
RGBA colour gives us something different – the ability to control the opacity of the individual colours rather than the entire element. So we can set the opacity on just the background:
50% opacity on just the background colour
h1 {
color: rgb(0, 0, 0);
background-color: rgba(255, 255, 255, 0.5);
}
Or leave the background solid and change the opacity on just the text:
50% opacity on just the foreground colour
h1 {
color: rgba(0, 0, 0, 0.5);
background-color: rgb(255, 255, 255);
}
The How-To
You’ll notice that above I’ve been using the rgb() syntax for specifying colours. This is a bit less common than the usual hex codes (like #FFF) but it makes sense when starting to use RGBA. As there’s no way to specify opacity with hex codes, we use rgba() like so:
color: rgba(255, 255, 255, 0.5);
Just like rgb() the first three values are red, green and blue. You can specify these 0-255 or 0%-100%. The fourth value is the opacity level from 0 (completely transparent) to 1 (completely opaque).
You can use this anywhere you’d normally set a colour in CSS — so it’s good for foregrounds and background, borders, outlines and so on. All the transparency effects on this site’s current design are achieved this way.
Supporting All Browsers
Like a lot of the features we’ll be looking at in this year’s 24 ways, RGBA colour is supported by a lot of the newest browsers, but not the rest. Firefox, Safari, Chrome and Opera browsers all support RGBA, but Internet Explorer does not.
Fortunately, due to the robust design of CSS as a language, we can specify RGBA colours for browsers that support it and an alternative for browsers that do not.
Falling back to solid colour
The simplest technique is to allow the browser to fall back to using a solid colour when opacity isn’t available. The CSS parsing rules specify that any unrecognised value should be ignored. We can make use of this because a browser without RGBA support will treat a colour value specified with rgba() as unrecognised and discard it.
So if we specify the colour first using rgb() for all browsers, we can then overwrite it with an rgba() colour for browsers that understand RGBA.
h1 {
color: rgb(127, 127, 127);
color: rgba(0, 0, 0, 0.5);
}
Falling back to a PNG
In cases where you’re using transparency on a background-color (although not on borders or text) it’s possible to fall back to using a PNG with alpha channel to get the same effect. This is less flexible than using CSS as you’ll need to create a new PNG for each level of transparency required, but it can be a useful solution.
Using the same principal as before, we can specify the background in a style that all browsers will understand, and then overwrite it in a way that browsers without RGBA support will ignore.
h1 {
background: transparent url(black50.png);
background: rgba(0, 0, 0, 0.5) none;
}
It’s important to note that this works because we’re using the background shorthand property, enabling us to set both the background colour and background image in a single declaration. It’s this that enables us to rely on the browser ignoring the second declaration when it encounters the unknown rgba() value.
Next Steps
The really great thing about RGBA colour is that it gives us the ability to create far more graphically rich designs without the need to use images. Not only does that make for faster and lighter pages, but sites which are easier and quicker to build and maintain. CSS values can also be changed in response to user interaction or even manipulated with JavaScript in a way that’s just not so easy using images.
Opacity can be changed on :hover or manipulated with JavaScript
div {
color: rgba(255, 255, 255, 0.8);
background-color: rgba(142, 213, 87, 0.3);
}
div:hover {
color: rgba(255, 255, 255, 1);
background-color: rgba(142, 213, 87, 0.6);
}
Clever use of transparency in border colours can help ease the transition between overlay items and the page behind.
Borders can receive the RGBA treatment, too
div {
color: rgb(0, 0, 0);
background-color: rgb(255, 255, 255);
border: 10px solid rgba(255, 255, 255, 0.3);
}
In Conclusion
That’s a brief insight into RGBA colour, what it’s good for and how it can be used whilst providing support for older browsers. With the current lack of support in Internet Explorer, it’s probably not a technique that commercial designs will want to heavily rely on right away – simply because of the overhead of needing to think about fallback all the time.
It is, however, a useful tool to have for those smaller, less critical touches that can really help to finesse a design. As browser support becomes more mainstream, you’ll already be familiar and practised with RGBA and ready to go. |
2009 |
Drew McLellan |
drewmclellan |
2009-12-01T00:00:00+00:00 |
https://24ways.org/2009/working-with-rgba-colour/ |
code |
| 334 |
Transitional vs. Strict Markup |
When promoting web standards, standardistas often talk about XHTML as being more strict than HTML. In a sense it is, since it requires that all elements are properly closed and that attribute values are quoted. But there are two flavours of XHTML 1.0 (three if you count the Frameset DOCTYPE, which is outside the scope of this article), defined by the Transitional and Strict DOCTYPEs. And HTML 4.01 also comes in those flavours.
The names reveal what they are about: Transitional DOCTYPEs are meant for those making the transition from older markup to modern ways. Strict DOCTYPEs are actually the default – the way HTML 4.01 and XHTML 1.0 were constructed to be used.
A Transitional DOCTYPE may be used when you have a lot of legacy markup that cannot easily be converted to comply with a Strict DOCTYPE. But Strict is what you should be aiming for. It encourages, and in some cases enforces, the separation of structure and presentation, moving the presentational aspects from markup to CSS. From the HTML 4 Document Type Definition:
This is HTML 4.01 Strict DTD, which excludes the presentation attributes and elements that W3C expects to phase out as support for style sheets matures. Authors should use the Strict DTD when possible, but may use the Transitional DTD when support for presentation attribute and elements is required.
An additional benefit of using a Strict DOCTYPE is that doing so will ensure that browsers use their strictest, most standards compliant rendering modes.
Tommy Olsson provides a good summary of the benefits of using Strict over Transitional in Ten questions for Tommy Olsson at Web Standards Group:
In my opinion, using a Strict DTD, either HTML 4.01 Strict or XHTML 1.0 Strict, is far more important for the quality of the future web than whether or not there is an X in front of the name. The Strict DTD promotes a separation of structure and presentation, which makes a site so much easier to maintain.
For those looking to start using web standards and valid, semantic markup, it is important to understand the difference between Transitional and Strict DOCTYPEs. For complete listings of the differences between Transitional and Strict DOCTYPEs, see XHTML: Differences between Strict & Transitional, Comparison of Strict and Transitional XHTML, and XHTML1.0 Element Attributes by DTD.
Some of the differences are more likely than others to cause problems for developers moving from a Transitional DOCTYPE to a Strict one, and I’d like to mention a few of those.
Elements that are not allowed in Strict DOCTYPEs
center
font
iframe
strike
u
Attributes not allowed in Strict DOCTYPEs
align (allowed on elements related to tables: col, colgroup, tbody, td, tfoot, th, thead, and tr)
language
background
bgcolor
border (allowed on table)
height (allowed on img and object)
hspace
name (allowed in HTML 4.01 Strict, not allowed on form and img in XHTML 1.0 Strict)
noshade
nowrap
target
text, link, vlink, and alink
vspace
width (allowed on img, object, table, col, and colgroup)
Content model differences
An element type’s content model describes what may be contained by an instance of the element type. The most important difference in content models between Transitional and Strict is that blockquote, body, and form elements may only contain block level elements. A few examples:
text and images are not allowed immediately inside the body element, and need to be contained in a block level element like p or div
input elements must not be direct descendants of a form element
text in blockquote elements must be wrapped in a block level element like p or div
Go Strict and move all presentation to CSS
Something that can be helpful when doing the transition from Transitional to Strict DOCTYPEs is to focus on what each element of the page you are working on is instead of how you want it to look.
Worry about looks later and get the structure and semantics right first. |
2005 |
Roger Johansson |
rogerjohansson |
2005-12-13T00:00:00+00:00 |
https://24ways.org/2005/transitional-vs-strict-markup/ |
code |
| 316 |
Have Your DOM and Script It Too |
When working with the XMLHttpRequest object it appears you can only go one of three ways:
You can stay true to the colorful moniker du jour and stick strictly to the responseXML property
You can play with proprietary – yet widely supported – fire and inject the value of responseText property into the innerHTML of an element of your choosing
Or you can be eval() and parse JSON or arbitrary JavaScript delivered via responseText
But did you know that there’s a fourth option giving you the best of the latter two worlds? Mint uses this unmentioned approach to grab fresh HTML and run arbitrary JavaScript simultaneously. Without relying on eval(). “But wait-”, you might say, “when would I need to do this?” Besides the example below this technique is handy for things like tab groups that need initialization onload but miss the main onload event handler by a mile thanks to asynchronous scripting.
Consider the problem
Originally Mint used option 2 to refresh or load new tabs into individual Pepper panes without requiring a full roundtrip to the server. This was all well and good until I introduced the new Client Mode which when enabled allows anyone to view a Mint installation without being logged in. If voyeurs are afoot as Client Mode is disabled, the next time they refresh a pane the entire login page is inserted into the current document. That’s not very helpful so I needed a way to redirect the current document to the login page.
Enter the solution
Wouldn’t it be cool if browsers interpreted the contents of script tags crammed into innerHTML? Sure, but unfortunately, that just wasn’t meant to be. However like the body element, image elements have an onload event handler. When the image has fully loaded the handler runs the code applied to it. See where I’m going with this?
By tacking a tiny image (think single pixel, transparent spacer gif – shudder) onto the end of the HTML returned by our Ajax call, we can smuggle our arbitrary JavaScript into the existing document. The image is added to the DOM, and our stowaway can go to town.
<p>This is the results of our Ajax call.</p>
<img src="../images/loaded.gif" alt="" onload="alert('Now that I have your attention...');" />
Please be neat
So we’ve just jammed some meaningless cruft into our DOM. If our script does anything with images this addition could have some unexpected side effects. (Remember The Fly?) So in order to save that poor, unsuspecting element whose innerHTML we just swapped out from sharing Jeff Goldblum’s terrible fate we should tidy up after ourselves. And by using the removeChild method we do just that.
<p>This is the results of our Ajax call.</p>
<img src="../images/loaded.gif" alt=""
onload="alert('Now that I have your attention...');this.parentNode.removeChild(this);" /> |
2005 |
Shaun Inman |
shauninman |
2005-12-24T00:00:00+00:00 |
https://24ways.org/2005/have-your-dom-and-script-it-too/ |
code |
| 89 |
Direction, Distance and Destinations |
With all these new smartphones in the hands of lost and confused owners, we need a better way to represent distances and directions to destinations. The immediate examples that jump to mind are augmented reality apps which let you see another world through your phone’s camera. While this is interesting, there is a simpler way: letting people know how far away they are and if they are getting warmer or colder.
In the app world, you can easily tap into the phone’s array of sensors such as the GPS and compass, but what people rarely know is that you can do the same with HTML. The native versus web app debate will never subside, but at least we can show you how to replicate some of the functionality progressively in HTML and JavaScript.
In this tutorial, we’ll walk through how to create a simple webpage listing distances and directions of a few popular locations around the world. We’ll use JavaScript to access the device’s geolocation API and also attempt to access the compass to get a heading. Both of these APIs are documented, to be included in the W3C geolocation API specification, and can be used on both desktop and mobile devices today.
To get started, we need a list of a few locations around the world. I have chosen the highest mountain peak on each continent so you can see a diverse set of distances and directions.
Mountain
°Latitude
°Longitude
Kilimanjaro
-3.075833
37.353333
Vinson Massif
-78.525483
-85.617147
Puncak Jaya
-4.078889
137.158333
Everest
27.988056
86.925278
Elbrus
43.355
42.439167
Mount McKinley
63.0695
-151.0074
Aconcagua
-32.653431
-70.011083
Source: Wikipedia
We can put those into an HTML list to be styled and accessed by JavaScript to create some distance and directions calculations.
The next thing we need to do is check to see if the browser and operating system have geolocation support. To do this we test to see if the function is available or not using a single JavaScript if statement.
<script>
// If this is true, then the method is supported and we can try to access the location
if (navigator.geolocation) {
navigator.geolocation.getCurrentPosition(geo_success, geo_error);
}
</script>
The if statement will be false if geolocation support is not present, and then it is up to you to do something else instead as a fallback. For this example, we’ll do nothing since our page should work as is and only get progressively better if more functionality is available.
The if statement will be true if there is support and therefore will continue inside the curly brackets to try to get the location. This should prompt the reader to accept or deny the request to get their location. If they say no, the second function callback is processed, in this case a function called geo_error; whereas if the location is available, it fires the geo_success function callback.
The function geo_error(){ } isn’t that exciting. You can handle this in any way you see fit. The success function is more interesting. We get a position object passed into the function which contains a series of exciting attributes, namely the latitude and longitude of the device’s current location.
function geo_success(position){
gLat = position.coords.latitude;
gLon = position.coords.longitude;
}
Now, in the variables gLat and gLon we have the user’s approximate geographical position. We can use this information to start to calculate some distances between where they are and all the destinations.
At the time of writing, you can also get position.coords.heading, but on Windows and iOS devices this returned NULL. In the future, if and when this is supported, this is also where you can easily grab the compass information.
Inside the geo_success function, we want to loop through the HTML to get all of the mountain peaks’ latitudes and longitudes and compute the distance.
...
$('.geo').each(function(){
// Get the lat/lon from the HTML
tLat = $(this).find('.lat').html()
tLon = $(this).find('.lon').html()
// compute the distances between the current location and this points location
dist = distance(tLat,tLon,gLat,gLon);
// set the return values into something useful
d = parseInt(dist[0]*10)/10;
a = parseFloat(dist[1]);
// display the value in the HTML and style the arrow
$(this).find('.distance').html(d+' km away');
$(this).find('.direction').css('-webkit-transform','rotate(-' + a + 'deg)');
// store the arc for later use if compass is available
$(this).attr('data-arc',a);
}
In the variable d we have the distance between the current location and the location of the mountain peak based on the Haversine Formula. The variable a is the arc, which has a value from 0 to 359.99. This will be useful later if we have compass support. Given these two values we have a distance and a heading to style the HTML.
The next thing we want to do is check to see if the device has a compass and then get access to the the current heading. As we’ll see, there are several ways to do this, some of which work on certain devices but not others. The W3C geolocation spec says that, along with the coordinates, there are several other attributes: accuracy; altitude; and heading. Heading is the direction to true north, which is different than magnetic north! WebKit and Windows return NULL for the heading value, but WebKit has an experimental method to fetch the heading. If you get into accessing these sensors, you’ll have to try to catch a few of these methods to finally get a value. Assuming you do, we can move on to the more interesting display opportunities.
In an ideal world, this would succeed and set a variable we’ll call compassHeading to get a value between 0 and 359.99 degrees. Now we know which direction north is, we also know the direction relative to north of the path to our destination, so we can can subtract the two values to get an arrow to display on the screen. But we’re not finished yet: we also need to get the device’s orientation (landscape or portrait) and subtract the correct amount from the angle for the arrow. Once we have a value, we can use CSS to rotate the arrow the correct number of degrees.
-webkit-transform: rotate(-180deg)
Not all devices support a standard way to access compass information, so in the meantime we need to use a work around. On iOS, you can use the experimental event method e.webkitCompassHeading. We want the compass to update in real time as the device is moved around, so we’ll put this inside an event listener.
window.addEventListener('deviceorientation', function(e) {
// Loop through all the locations on the page
$('.geo').each(function(){
// get the arc value from north we computed and stored earlier
destination_arc = parseInt($(this).attr('data-arc'))
compassHeading = e.webkitCompassHeading + window.orientation + destination_arc;
// find the arrow element and rotate it accordingly
$(this).find('.direction').css('-webkit-transform','rotate(-' + compassHeading + 'deg)');
}
}
As the device is rotated, the compass arrow will constantly be updated. If you want to see an example, you can have a look at this page which shows the distances to all the peaks on each continent.
With progressive enhancement, we slowly layer on additional functionality as we go. The reader will first see the list of locations with a latitude and longitude. If the device is capable and permissions allow, it will then compute the distance. If a compass is available, with the correct permissions it will then add the final layer which is direction.
You should consider this code a stub for your projects. If you are making a hyperlocal webpage with restaurant locations, for example, then consider adding these features. Knowing not only how far away a place is, but also the direction can be hugely important, and since the compass is always active, it acts as a guide to the location.
Future developments
Improvements to this could include setting a timer and recalling the navigator.geolocation.getCurrentPosition() function and updating the distances. I chose very distant mountains so kilometres made sense, but you can divide again by 1,000 to convert to metres if you are dealing with much nearer places. Walking or driving would change the distances so the ability to refresh would be important.
It is outside the scope of this article, but if you manage to get this HTML to work offline, then you can make a nice web app which sits on your devices’ homescreens and works even without an internet connection. This could be ideal for travellers in an unknown city looking for your destination. Just with offline storage, base64 encoding and data URIs, it is possible to embed plenty of design and functionality into a small offline webpage.
Now you know how to use JavaScript to look up a destination’s location and figure out the distance and direction – never get lost again. |
2012 |
Brian Suda |
briansuda |
2012-12-19T00:00:00+00:00 |
https://24ways.org/2012/direction-distance-and-destinations/ |
code |
| 30 |
Making Sites More Responsive, Responsibly |
With digital projects we’re used to shifting our thinking to align with our target audience. We may undertake research, create personas, identify key tasks, or observe usage patterns, with our findings helping to refine our ongoing creations. A product’s overall experience can make or break its success, and when it comes to defining these experiences our development choices play a huge role alongside more traditional user-focused activities.
The popularisation of responsive web design is a great example of how we are able to shape the web’s direction through using technology to provide better experiences. If we think back to the move from table-based layouts to CSS, initially our clients often didn’t know or care about the difference in these approaches, but we did. Responsive design was similar in this respect – momentum grew through the web industry choosing to use an approach that we felt would give a better experience, and which was more future-friendly.
We tend to think of responsive design as a means of displaying content appropriately across a range of devices, but the technology and our implementation of it can facilitate much more. A responsive layout not only helps your content work when the newest smartphone comes out, but it also ensures your layout suitably adapts if a visually impaired user drastically changes the size of the text.
The 24 ways site at 400% on a Retina MacBook Pro displays a layout more typically used for small screens.
When we think more broadly, we realise that our technical choices and approaches to implementation can have knock-on effects for the greater good, and beyond our initial target audiences. We can make our experiences more responsive to people’s needs, enhancing their usability and accessibility along the way.
Being responsibly responsive
Of course, when we think about being more responsive, there’s a fine line between creating useful functionality and becoming intrusive and overly complex. In the excellent Responsible Responsive Design, Scott Jehl states that:
A responsible responsive design equally considers the following throughout a project:
Usability: The way a website’s user interface is presented to the user, and how that UI responds to browsing conditions and user interactions.
Access: The ability for users of all devices, browsers, and assistive technologies to access and understand a site’s features and content.
Sustainability: The ability for the technology driving a site or application to work for devices that exist today and to continue to be usable and accessible to users, devices, and browsers in the future.
Performance: The speed at which a site’s features and content are perceived to be delivered to the user and the efficiency with which they operate within the user interface.
Scott’s book covers these ideas in a lot more detail than I’ll be able to here (put it on your Christmas list if it’s not there already), but for now let’s think a bit more about our roles as digital creators and the power this gives us.
Our choices around technology and the decisions we have to make can be extremely wide-ranging. Solutions will vary hugely depending on the needs of each project, though we can further explore the concept of making our creations more responsive through the use of humble web technologies.
The power of the web
We all know that under the HTML5 umbrella are some great new capabilities, including a number of JavaScript APIs such as geolocation, web audio, the file API and many more. We often use these to enhance the functionality of our sites and apps, to add in new features, or to facilitate device-specific interactions.
You’ll have seen articles with flashy titles such as “Top 5 JavaScript APIs You’ve Never Heard Of!”, which you’ll probably read, think “That’s quite cool”, yet never use in any real work.
There is great potential for technologies like these to be misused, but there are also great prospects for them to be used well to enhance experiences. Let’s have a look at a few examples you may not have considered.
Offline first
When we make websites, many of us follow a process which involves user stories – standardised snippets of context explaining who needs what, and why.
“As a student I want to pay online for my course so I don’t have to visit the college in person.”
“As a retailer I want to generate unique product codes so I can manage my stock.”
We very often focus heavily on what needs doing, but may not consider carefully how it will be done. As in Scott’s list, accessibility is extremely important, not only in terms of providing a great experience to users of assistive technologies, but also to make your creation more accessible in the general sense – including under different conditions.
Offline first is yet another ‘first’ methodology (my personal favourite being ‘tea first’), which encourages us to develop so that connectivity itself is an enhancement – letting users continue with tasks even when they’re offline. Despite the rapid growth in public Wi-Fi, if we consider data costs and connectivity in developing countries, our travel habits with planes, underground trains and roaming (or simply if you live in the UK’s signal-barren East Anglian wilderness as I do), then you’ll realise that connectivity isn’t as ubiquitous as our internet-addled brains would make us believe. Take a scenario that I’m sure we’re all familiar with – the digital conference. Your venue may be in a city served by high-speed networks, but after overloading capacity with a full house of hashtag-hungry attendees, each carrying several devices, then everyone’s likely to be offline after all. Wouldn’t it be better if we could do something like this instead?
Someone visits our conference website.
On this initial run, some assets may be cached for future use: the conference schedule, the site’s CSS, photos of the speakers.
When the attendee revisits the site on the day, the page shell loads up from the cache.
If we have cached content (our session timetable, speaker photos or anything else), we can load it directly from the cache. We might then try to update this, or get some new content from the internet, but the conference attendee already has a base experience to use.
If we don’t have something cached already, then we can try grabbing it online.
If for any reason our requests for new content fail (we’re offline), then we can display a pre-cached error message from the initial load, perhaps providing our users with alternative suggestions from what is cached.
There are a number of ways we can make something like this, including using the application cache (AppCache) if you’re that way inclined. However, you may want to look into service workers instead. There are also some great resources on Offline First! if you’d like to find out more about this.
Building in offline functionality isn’t necessarily about starting offline first, and it’s also perfectly possible to retrofit sites and apps to catch offline scenarios, but this kind of graceful degradation can end up being more complex than if we’d considered it from the start. By treating connectivity as an enhancement, we can improve the experience and provide better performance than we can when waiting to counter failures. Our websites can respond to connectivity and usage scenarios, on top of adapting how we present our content. Thinking in this way can enhance each point in Scott’s criteria.
As I mentioned, this isn’t necessarily the kind of development choice that our clients will ask us for, but it’s one we may decide is simply the right way to build based on our project, enhancing the experience we provide to people, and making it more responsive to their situation.
Even more accessible
We’ve looked at accessibility in terms of broadening when we can interact with a website, but what about how? Our user stories and personas are often of limited use. We refer in very general terms to students, retailers, and sometimes just users. What if we have a student whose needs are very different from another student? Can we make our sites even more usable and accessible through our development choices?
Again using JavaScript to illustrate this concept, we can do a lot more with the ways people interact with our websites, and with the feedback we provide, than simply accepting keyboard, mouse and touch inputs and displaying output on a screen.
Input
Ambient light detection is one of those features that looks great in simple demos, but which we struggle to put to practical use. It’s not new – many satnav systems automatically change the contrast for driving at night or in tunnels, and our laptops may alter the screen brightness or keyboard backlighting to better adapt to our surroundings. Using web technologies we can adapt our presentation to be better suited to ambient light levels.
If our device has an appropriate light sensor and runs a browser that supports the API, we can grab the ambient light in units using ambient light events, in JavaScript. We may then change our presentation based on different bandings, perhaps like this:
window.addEventListener('devicelight', function(e) {
var lux = e.value;
if (lux < 50) {
//Change things for dim light
}
if (lux >= 50 && lux <= 10000) {
//Change things for normal light
}
if (lux > 10000) {
//Change things for bright light
}
});
Live demo (requires light sensor and supported browser).
Soon we may also be able to do such detection through CSS, with light-level being cited in the Media Queries Level 4 specification. If that becomes the case, it’ll probably look something like this:
@media (light-level: dim) {
/*Change things for dim light*/
}
@media (light-level: normal) {
/*Change things for normal light*/
}
@media (light-level: washed) {
/*Change things for bright light*/
}
While we may be quick to dismiss this kind of detection as being a gimmick, it’s important to consider that apps such as Light Detector, listed on Apple’s accessibility page, provide important context around exactly this functionality.
“If you are blind, Light Detector helps you to be more independent in many daily activities. At home, point your iPhone towards the ceiling to understand where the light fixtures are and whether they are switched on. In a room, move the device along the wall to check if there is a window and where it is. You can find out whether the shades are drawn by moving the device up and down.”
everywaretechnologies.com/apps/lightdetector
Input can be about so much more than what we enter through keyboards. Both an ever increasing amount of available sensors and more APIs being supported by the major browsers will allow us to cater for more scenarios and respond to them accordingly. This can be as complex or simple as you need; for instance, while x-webkit-speech has been deprecated, the web speech API is available for a number of browsers, and research into sign language detection is also being performed by organisations such as Microsoft.
Output
Web technologies give us some great enhancements around input, allowing us to adapt our experiences accordingly. They also provide us with some nice ways to provide feedback to users.
When we play video games, many of our modern consoles come with the ability to have rumble effects on our controller pads. These are a great example of an enhancement, as they provide a level of feedback that is entirely optional, but which can give a great deal of extra information to the player in the right circumstances, and broaden the scope of our comprehension beyond what we’re seeing and hearing.
Haptic feedback is possible on the web as well. We could use this in any number of responsible applications, such as alerting a user to changes or using different patterns as a communication mechanism. If you find yourself in a pickle, here’s how to print out SOS in Morse code through the vibration API. The following code indicates the length of vibration in milliseconds, interspersed by pauses in milliseconds.
navigator.vibrate([100, 300, 100, 300, 100, 300, 600, 300, 600, 300, 600, 300, 100, 300, 100, 300, 100]);
Live demo (requires supported browser)
With great power…
What you’ve no doubt come to realise by now is that these are just more examples of progressive enhancement, whose inclusion will provide a better experience if the capabilities are available, but which we should not rely on. This idea isn’t new, but the most important thing to remember, and what I would like you to take away from this article, is that it is up to us to decide to include these kind of approaches within our projects – if we don’t root for them, they probably won’t happen. This is where our professional responsibility comes in.
We won’t necessarily be asked to implement solutions for the scenarios above, but they illustrate how we can help to push the boundaries of experiences. Maybe we’ll have to switch our thinking about how we build, but we can create more usable products for a diverse range of people and usage scenarios through the choices we make around technology. Let’s stop thinking simply in terms of features inside a narrow view of our target users, and work out how we can extend these to cater for a wider set of situations.
When you plan your next digital project, consider the power of the web and the enhancements we can use, and try to make your projects even more responsive and responsible. |
2014 |
Sally Jenkinson |
sallyjenkinson |
2014-12-10T00:00:00+00:00 |
https://24ways.org/2014/making-sites-more-responsive-responsibly/ |
code |
| 221 |
“Probably, Maybe, No”: The State of HTML5 Audio |
With the hype around HTML5 and CSS3 exceeding levels not seen since 2005’s Ajax era, it’s worth noting that the excitement comes with good reason: the two specifications render many years of feature hacks redundant by replacing them with native features. For fun, consider how many CSS2-based rounded corners hacks you’ve probably glossed over, looking for a magic solution. These days, with CSS3, the magic is border-radius (and perhaps some vendor prefixes) followed by a coffee break.
CSS3’s border-radius, box-shadow, text-shadow and gradients, and HTML5’s <canvas>, <audio> and <video> are some of the most anticipated features we’ll see put to creative (ab)use as adoption of the ‘new shiny’ grows. Developers jumping on the cutting edge are using subsets of these features to little detriment, in most cases. The more popular CSS features are design flourishes that can degrade nicely, but the current audio and video implementations in particular suffer from a number of annoyances.
The new shiny: how we got here
Sound involves one of the five senses, a key part of daily life for most – and yet it has been strangely absent from HTML and much of the web by default. From a simplistic perspective, it seems odd that HTML did not include support for the full multimedia experience earlier, despite the CD-ROM-based craze of the early 1990s. In truth, standards like HTML can take much longer to bake, but eventually deliver the promise of a lowered barrier to entry, consistent implementations and shiny new features now possible ‘for free’ just about everywhere.
<img> was introduced early and naturally to HTML, despite having some opponents at the time. Perhaps <audio> and <video> were avoided, given the added technical complexity of decoding various multi-frame formats, plus the hardware and bandwidth limitations of the era. Perhaps there were quarrels about choosing a standard format or – more simply – maybe these elements just weren’t considered to be applicable to the HTML-based web at the time. In any event, browser plugins from programs like RealPlayer and QuickTime eventually helped to fill the in-page audio/video gap, handling <object> and <embed> markup which pointed to .wav, .avi, .rm or .mov files. Suffice it to say, the experience was inconsistent at best and, on the standards side of the fence right now, so is HTML5 in terms of audio and video.
: the theory
As far as HTML goes, the code for <audio> is simple and logical. Just as with <img>, a src attribute specifies the file to load. Pretty straightforward – sounds easy, right?
<audio src="mysong.ogg" controls>
<!-- alternate content for unsupported case -->
Download <a href="mysong.ogg">mysong.ogg</a>;
</audio>
Ah, if only it were that simple. The first problem is that the OGG audio format, while ‘free’, is not supported by some browsers. Conversely, nor is MP3, despite being a de facto standard used in all kinds of desktop software (and hardware). In fact, as of November 2010, no single audio format is commonly supported across all major HTML5-enabled browsers.
What you end up writing, then, is something like this:
<audio controls>
<source src="mysong.mp3" />
<source src="mysong.ogg" />
<!-- alternate content for unsupported case, maybe Flash, etc. -->
Download <a href="mysong.ogg">mysong.ogg</a> or <a href="mysong.mp3">mysong.mp3</a>
</audio>
Keep in mind, this is only a ‘first class’ experience for the HTML5 case; also, for non-supported browsers, you may want to look at another inline player (object/embed, or a JavaScript plus Flash API) to have inline audio. You can imagine the added code complexity in the case of supporting ‘first class’ experiences for older browsers, too.
: the caveats
With <img>, you typically don’t have to worry about format support – it just works – and that’s part of what makes a standard wonderful. JPEG, PNG, BMP, GIF, even TIFF images all render just fine if for no better reason, perhaps, than being implemented during the ‘wild west’ days of the web. The situation with <audio> today reflects a very different – read: business-aware – environment in 2010. (Further subtext: There’s a lot of [potential] money involved.) Regrettably, this is a collision of free and commercial interests, where the casualty is ultimately the user. Second up in the casualty list is you, the developer, who has to write additional code around this fragmented support.
The HTML5 audio API as implemented in JavaScript has one of the most un-computer-like responses I’ve ever seen, and inspired the title of this post. Calling new Audio().canPlayType('audio/mp3'), which queries the system for format support according to a MIME type, is supposed to return one of “probably”, “maybe”, or “no”. Sometimes, you’ll just get a null or empty string, which is also fun. A “maybe” response does not guarantee that a format will be supported; sometimes audio/mp3 gives “maybe,” but then audio/mpeg; codecs="mp3" will give a more-solid “probably” response. This can vary by browser or platform, too, depending on native support – and finally, the user may also be able to install codecs, extending support to include other formats. (Are you excited yet?)
Damn you, warring formats!
New market and business opportunities go hand-in-hand with technology developments. What we have here is certainly not failure to communicate; rather, we have competing parties shouting loudly in public in attempts to influence mindshare towards a de facto standard for audio and video. Unfortunately, the current situation means that at least two formats are effectively required to serve the majority of users correctly.
As it currently stands, we have the free and open source software camp of OGG Vorbis/WebM and its proponents (notably, Mozilla, Google and Opera in terms of browser makers), up against the non-free, proprietary and ‘closed’ camp of MP3 and MPEG4/HE-AAC/H.264 – which is where you’ll find commitments from Apple and Microsoft, among others. Apple is likely in with H.264 for the long haul, given its use of the format for its iTunes music store and video offerings.
It is generally held that H.264 is a technically superior format in terms of file size versus quality, but it involves intellectual property and, in many use cases, requires licensing fees. To be fair, there is a business model with H.264 and much has been invested in its development, but this approach is not often the kind that wins over the web. On that front, OGG/WebM may eventually win for being a ‘free’ format that does not involve a licensing scheme.
Closed software and tools ideologically clash with the open nature of the web, which exists largely thanks to free and open technology. Because of philosophical and business reasons, support for audio and video is fragmented across browsers adopting HTML5 features. It does not help that a large amount of audio and video currently exists in non-free MP3 and MPEG-4 formats. Adoption of <audio> and <video> may be slowed, since it is more complex than <img> and may feel ‘broken’ to developers when edge cases are encountered. Furthermore, the HTML5 spec does not mandate a single required format. The end result is that, as a developer, you must currently provide at least both MP3 and OGG, for example, to serve most existing HTML5-based user agents.
Transitioning to
There will be some growing pains as developers start to pick up the new HTML5 shiny, while balancing the needs of current and older agents that don’t support either <audio> or the preferred format you may choose (for example, MP3). In either event, Flash or other plugins can be used as done traditionally within HTML4 documents to embed and play the relevant audio.
The SoundManager 2 page player demo in action.
Ideally, HTML5 audio should be used whenever possible with Flash as the backup option. A few JavaScript/Flash-based audio player projects exist which balance the two; in attempting to tackle this problem, I develop and maintain SoundManager 2, a JavaScript sound API which transparently uses HTML5 Audio() and, if needed, Flash for playing audio files. The internals can get somewhat ugly, but the transition between HTML4 and HTML5 is going to be just that – and even with HTML5, you will need some form of format fall-back in addition to graceful degradation.
It may be safest to fall back to MP3/MP4 formats for inline playback at this time, given wide support via Flash, some HTML5-based browsers and mobile devices. Considering the amount of MP3/MP4 media currently available, it is wiser to try these before falling through to a traditional file download process.
Early findings
Here is a brief list of behavioural notes, annoyances, bugs, quirks and general weirdness I have found while playing with HTML5-based audio at time of writing (November 2010):
Apple iPad/iPhone (iOS 4, iPad 3.2+)
Only one sound can be played at a time. If a second sound starts, the first is stopped.
No auto-play allowed. Sounds follow the pop-up window security model and can only be started from within a user event handler such as onclick/touch, and so on. Otherwise, playback attempts silently fail.
Once started, a sequence of sounds can be created or played via the ‘finish’ event of the previous sound (for example, advancing through a playlist without interaction after first track starts).
iPad, iOS 3.2: Occasional ‘infinite loop’ bug seen where audio does not complete and stop at a sound’s logical end – instead, it plays again from the beginning. Might be specific to example file format (HE-AAC) encoded from iTunes.
Apple Safari, OS X Snow Leopard 10.6.5
Critical bug: Safari 4 and 5 intermittently fail to load or play HTML5 audio on Snow Leopard due to bug(s) in QuickTime X and/or other underlying frameworks. Known Apple ‘radar’ bug: bugs.webkit.org #32159 (see also, test case.) Amusing side note: Safari on Windows is fine.
Apple Safari, Windows
Food for thought: if you download “Safari” alone on Windows, you will not get HTML5 audio/video support (tested in WinXP). You need to download “Safari + QuickTime” to get HTML5 audio/video support within Safari. (As far as I’m aware, Chrome, Firefox and Opera either include decoders or use system libraries accordingly. Presumably IE 9 will use OS-level APIs.)
General Quirks
Seeking and loading, ‘progress’ events, and calculating bytes loaded versus bytes total should not be expected to be linear, as users can arbitrarily seek within a sound. It appears that some support for HTTP ranges exists, which adds a bit of logic to UI code. Browsers seem to vary slightly in their current implementations of these features.
The onload event of a sound may be of little relevance, if non-linear loading is involved (see above note re: seeking).
Interestingly (perhaps I missed it), the current spec does not seem to specify a panning or left/right channel mix option.
The preload attribute values may vary slightly between browsers at this time.
Upcoming shiny: HTML5 Audio Data API
With access to audio data, you can incorporate waveform and spectrum elements that make your designs react to music.
The HTML5 audio spec does a good job covering the basics of playback, but did not initially get into manipulation or generation of audio on-the-fly, something Flash has had for a number of years now. What if JavaScript could create, monitor and change audio dynamically, like a sort of audio <canvas> element? With that kind of capability, many dynamic audio processing features become feasible and, when combined with other media, can make for some impressive demos.
What started as a small idea among a small group of audio and programming enthusiasts grew to inspire a W3C audio incubator group, and continued to establish the Mozilla Audio Data API. Contributors wrote a patch for Firefox which was reviewed and revised, and is now slated to be in the public release of Firefox 4. Some background and demos are also detailed in an article from the BBC R&D blog.
There are plenty of live demos to see, which give an impression of the new creative ideas this API enables. Many concepts are not new in themselves, but it is exciting to see this sort of thing happening within the native browser context.
Mozilla is not alone in this effort; the WebKit folks are also working on a JavaScriptAudioNode interface, which implements similar audio buffering and sample elements.
The future?
It is my hope that we’ll see a common format emerge in terms of support across the major browsers for both audio and video; otherwise, support will continue to be fragmented and mildly frustrating to develop for, and that can impede growth of the feature. It’s a big call, but if <img> had lacked a common format back in the wild west era, I doubt the web would have grown to where it is today.
Complaints and nitpicks aside, HTML5 brings excellent progress on the browser multimedia front, and the first signs of native support are a welcome improvement given all audio and video previously relied on plugins. There is good reason to be excited. While there is room for more, support could certainly be much worse – and as tends to happen with specifications, the implementations targeting them should improve over time.
Note: Thanks to Nate Koechley, who suggested the Audio().canPlayType() response be part of the article title. |
2010 |
Scott Schiller |
scottschiller |
2010-12-08T00:00:00+00:00 |
https://24ways.org/2010/the-state-of-html5-audio/ |
code |
| 124 |
Writing Responsible JavaScript |
Without a doubt, JavaScript has been making something of a comeback in the last year. If you’re involved in client-side development in any way at all, chances are that you’re finding yourself writing more JavaScript now than you have in a long time.
If you learned most of your JavaScript back when DHTML was all the rage and before DOM Scripting was in vogue, there have been some big shifts in the way scripts are written. Most of these are in the way event handlers are assigned and functions declared. Both of these changes are driven by the desire to write scripts that are responsible page citizens, both in not tying behaviour to content and in taking care not to conflict with other scripts. I thought it may be useful to look at some of these more responsible approaches to learn how to best write scripts that are independent of the page content and are safely portable between different applications.
Event Handling
Back in the heady days of Web 1.0, if you wanted to have an object on the page react to something like a click, you would simply go ahead and attach an onclick attribute. This was easy and understandable, but much like the font tag or the style attribute, it has the downside of mixing behaviour or presentation in with our content. As we’re learned with CSS, there are big benefits in keeping those layers separate. Hey, if it works for CSS, it should work for JavaScript too.
Just like with CSS, instead of adding an attribute to our element within the document, the more responsible way to do that is to look for the item from your script (like CSS does with a selector) and then assign the behaviour to it. To give an example, take this oldskool onclick use case:
<a id="anim-link" href="#" onclick="playAnimation()">Play the animation</a>
This could be rewritten by removing the onclick attribute, and instead doing the following from within your JavaScript.
document.getElementById('anim-link').onclick = playAnimation;
It’s all in the timing
Of course, it’s never quite that easy. To be able to attach that onclick, the element you’re targeting has to exist in the page, and the page has to have finished loading for the DOM to be available. This is where the onload event is handy, as it fires once everything has finished loading. Common practise is to have a function called something like init() (short for initialise) that sets up all these event handlers as soon as the page is ready.
Back in the day we would have used the onload attibute on the <body> element to do this, but of course what we really want is:
window.onload = init;
As an interesting side note, we’re using init here rather than init() so that the function is assigned to the event. If we used the parentheses, the init function would have been run at that moment, and the result of running the function (rather than the function itself) would be assigned to the event. Subtle, but important.
As is becoming apparent, nothing is ever simple, and we can’t just go around assigning our initialisation function to window.onload. What if we’re using other scripts in the page that might also want to listen out for that event? Whichever script got there last would overwrite everything that came before it. To manage this, we need a script that checks for any existing event handlers, and adds the new handler to it. Most of the JavaScript libraries have their own systems for doing this. If you’re not using a library, Simon Willison has a good stand-alone example
function addLoadEvent(func) {
var oldonload = window.onload;
if (typeof window.onload != 'function') {
window.onload = func;
} else {
window.onload = function() {
if (oldonload) {
oldonload();
}
func();
}
}
}
Obviously this is just a toe in the events model’s complex waters. Some good further reading is PPK’s Introduction to Events.
Carving out your own space
Another problem that rears its ugly head when combining multiple scripts on a single page is that of making sure that the scripts don’t conflict. One big part of that is ensuring that no two scripts are trying to create functions or variables with the same names. Reusing a name in JavaScript just over-writes whatever was there before it.
When you create a function in JavaScript, you’ll be familiar with doing something like this.
function foo() {
... goodness ...
}
This is actually just creating a variable called foo and assigning a function to it. It’s essentially the same as the following.
var foo = function() {
... goodness ...
}
This name foo is by default created in what’s known as the ‘global namespace’ – the general pool of variables within the page. You can quickly see that if two scripts use foo as a name, they will conflict because they’re both creating those variables in the global namespace.
A good solution to this problem is to add just one name into the global namespace, make that one item either a function or an object, and then add everything else you need inside that. This takes advantage of JavaScript’s variable scoping to contain you mess and stop it interfering with anyone else.
Creating An Object
Say I was wanting to write a bunch of functions specifically for using on a site called ‘Foo Online’. I’d want to create my own object with a name I think is likely to be unique to me.
var FOOONLINE = {};
We can then start assigning functions are variables to it like so:
FOOONLINE.message = 'Merry Christmas!';
FOOONLINE.showMessage = function() {
alert(this.message);
};
Calling FOOONLINE.showMessage() in this example would alert out our seasonal greeting. The exact same thing could also be expressed in the following way, using the object literal syntax.
var FOOONLINE = {
message: 'Merry Christmas!',
showMessage: function() {
alert(this.message);
}
};
Creating A Function to Create An Object
We can extend this idea bit further by using a function that we run in place to return an object. The end result is the same, but this time we can use closures to give us something like private methods and properties of our object.
var FOOONLINE = function(){
var message = 'Merry Christmas!';
return {
showMessage: function(){
alert(message);
}
}
}();
There are two important things to note here. The first is the parentheses at the end of line 10. Just as we saw earlier, this runs the function in place and causes its result to be assigned. In this case the result of our function is the object that is returned at line 4.
The second important thing to note is the use of the var keyword on line 2. This ensures that the message variable is created inside the scope of the function and not in the global namespace. Because of the way closure works (which if you’re not familiar with, just suspend your disbelief for a moment) that message variable is visible to everything inside the function but not outside. Trying to read FOOONLINE.message from the page would return undefined.
This is useful for simulating the concept of private class methods and properties that exist in other programming languages. I like to take the approach of making everything private unless I know it’s going to be needed from outside, as it makes the interface into your code a lot clearer for someone else to read.
All Change, Please
So that was just a whistle-stop tour of a couple of the bigger changes that can help to make your scripts better page citizens. I hope it makes useful Sunday reading, but obviously this is only the tip of the iceberg when it comes to designing modular, reusable code.
For some, this is all familiar ground already. If that’s the case, I encourage you to perhaps submit a comment with any useful resources you’ve found that might help others get up to speed. Ultimately it’s in all of our interests to make sure that all our JavaScript interoperates well – share your tips. |
2006 |
Drew McLellan |
drewmclellan |
2006-12-10T00:00:00+00:00 |
https://24ways.org/2006/writing-responsible-javascript/ |
code |
| 213 |
Accessibility Through Semantic HTML |
Working on Better, a tracker blocker, I spend an awful lot of my time with my nose in other people’s page sources. I’m mostly there looking for harmful tracking scripts, but often notice the HTML on some of the world’s most popular sites is in a sad state of neglect.
What does neglected HTML look like? Here’s an example of the markup I found on a news site just yesterday. There’s a bit of text, a few links, and a few images. But mostly it’s div elements.
<div class="block_wrapper">
<div class="block_content">
<div class="box">
<div id="block1242235">
<div class="column">
<div class="column_content">
<a class="close" href="#"><i class="fa"></i></a>
</div>
<div class="btn account_login"></div>
Some text <span>more text</span>
</div>
</div>
</div>
</div>
</div>
divs and spans, why do we use them so much?
While I find tracking scripts completely inexcusable, I do understand why people write HTML like the above. As developers, we like to use divs and spans as they’re generic elements. They come with no associated default browser styles or behaviour except that div displays as a block, and span displays inline. If we make our page up out of divs and spans, we know we’ll have absolute control over styles and behaviour cross-browser, and we won’t need a CSS reset.
Absolute control may seem like an advantage, but there’s a greater benefit to less generic, more semantic elements. Browsers render semantic elements with their own distinct styles and behaviours. For example, button looks and behaves differently from a. And ul is different from ol. These defaults are shortcuts to a more usable and accessible web. They provide consistent and well-tested components for common interactions.
Semantic elements aid usability
A good example of how browser defaults can benefit the usability of an element is in the <select> option menu. In Safari on the desktop, the browser renders <select> as a popover-style menu. On a touchscreen, Safari overlays the same menu over the lower half of the screen as a “picker view.”
Option menu in Safari on macOS.
Option menu picker in Safari on iOS.
The iOS picker is a much better experience than struggling to pick from a complicated interface inside the page. The menu is shown more clearly than in the confined space on the page, which makes the options easier to read. The required swipe and tap gestures are consistent with the rest of the operating system, making the expected interaction easier to understand. The whole menu is scaled up, meaning the gestures don’t need such fine motor control. Good usability is good accessibility.
When we choose to use a div or span over a more semantic HTML element, we’re also doing hard work the browser could be doing for us. We don’t need to tie ourselves in knots making a custom div into a keyboard navigable option menu. Using select passes the bulk of the responsibility over to the browser.
Letting the browser do most of the work is also more future-friendly. More devices, with different expected interactions, will be released in the future. When that happens, the devices’ browsers can adapt our sites according to those interactions. Then we can spend our time doing something more fun than rewriting cross-browser JavaScript for each new device.
HTML’s impact on accessibility
Assistive technology also uses semantic HTML to understand how best to convey each element to its user.
For screen readers
Semantic HTML gives context to screen readers. Screen readers are a type of assistive technology that reads the content of the screen to the person using it. All sites have a linear page source. Sighted visitors can use visual cues on the page to navigate to their desired content in a non-linear fashion. As screen readers output audio (and sometimes braille), those visual cues aren’t usable in the same way.
Screen readers provide alternative means of navigation, enabling people to jump between different types of content, such as links, forms, headings, lists, and paragraphs. If all our content is marked up using divs and spans, we’re not giving screen readers a chance to index the valuable content.
For keyboard navigation
Keyboard-only navigation is also aided by semantic HTML. Forms, option menus, navigation, video, and audio are particularly hard for people relying on a keyboard to access. For instance, option menus and navigation can be very fiddly if you need to use a mouse to hover a menu open and move to select the desired item at the same time.
Again, we can leave much of the interaction to the browser through semantic HTML. Semantic form elements can convey if a check box has been checked, or which label is associated with which input field. These default behaviours can make the difference between a person being able to use a form or leaving the site out of frustration.
Did I convince you yet? I hope so. Let’s finish with some easy guidelines to follow.
1. Use the most semantic HTML element for the job
When you reach for a div, first check if there’s a better element to do the job. What is the role of that element? How should a person be interacting with the element?
Are you using class names like nav, header, or main? There are HTML5 elements for those sections! Using specific elements can also make writing CSS simpler, and ensure a consistent design with minimal effort.
2. Separate structure and style
Don’t choose HTML elements based on how they’re styled in your CSS. Nowadays, common practice is to use class names rather than elements for CSS selectors. You’re unlikely to wrap all your page content in an <h1> element because you want all the text to be big and bold. Still, it can be easy to choose an HTML element because it will be the easiest to style. Focusing on content without style will help us choose the most semantic HTML element without that temptation. For example, you could add a class of .btn to a div to make it look like a button. But we all know that only a button will really behave like a button.
3. Use progressive enhancement for enhanced functionality
Airbnb and Groupon recently proved we’re not past the laziness of “this site only works in X browser.” Baffling disregard for the open web aside, making complex interactive experiences work cross-browser and cross-device is not easy. We can use progressive enhancement to layer fancy or unsupported features on top of a baseline “it works” experience.
We should build the baseline experience on a foundation of accessible, semantic HTML. Then, if you really want to add a specific feature for a proprietary browser, you can layer that on top, without breaking the underlying experience.
4. Test your work
Validators are always valuable for checking the browser will be able to correctly interpret your markup. Document outline checkers can be valuable for testing your structure, but be aware that the HTML5 document outline is not actually implemented in browsers.
Once you’ve got something resembling a web page, test the experience! Ensure that semantic HTML element you chose looks and behaves in a predictable manner consistent with its use across the web. Test cross-browser, test cross-device, and test with assistive technology. Testing with assistive technology is not as expensive as it used to be, you can even use your smartphone for testing on iOS and Android. Your visitors will thank you!
Further reading
Accessibility For Everyone by Laura Kalbag
HTML5 Doctor
HTML5 Accessibility
An overview of HTML5 Semantics
HTML reference on MDN
Heydon Pickering’s Inclusive Design Checklist
The Paciello Group’s Inclusive Design Principles |
2017 |
Laura Kalbag |
laurakalbag |
2017-12-15T00:00:00+00:00 |
https://24ways.org/2017/accessibility-through-semantic-html/ |
code |
| 242 |
Creating My First Chrome Extension |
Writing a Chrome Extension isn’t as scary at it seems!
Not too long ago, I used a Chrome extension called 20 Cubed. I’m far-sighted, and being a software engineer makes it difficult to maintain distance vision. So I used 20 Cubed to remind myself to look away from my screen and rest my eyes. I loved its simple interface and design. I loved it so much, I often forgot to turn it off in the middle of presentations, where it would take over my entire screen. Oops.
Unfortunately, the developer stopped updating the extension and removed it from Chrome’s extension library. I was so sad. None of the other eye rest extensions out there matched my design aesthetic, so I decided to create my own! Want to do the same?
Fortunately, Google has some respectable documentation on how to create an extension. And remember, Chrome extensions are just HTML, CSS, and JavaScript. You can add libraries and frameworks, or you can just code the “old-fashioned” way. Sky’s the limit!
Setup
But first, some things you’ll need to know about before getting started:
Callbacks
Timeouts
Chrome Dev Tools
Developing with Chrome extension methods requires a lot of callbacks. If you’ve never experienced the joy of callback hell, creating a Chrome extension will introduce you to this concept. However, things can get confusing pretty quickly. I’d highly recommend brushing up on that subject before getting started.
Hyperbole and a Half
Timeouts and Intervals are another thing you might want to brush up on. While creating this extension, I didn’t consider the fact that I’d be juggling three timers. And I probably would’ve saved time organizing those and reading up on the Chrome extension Alarms documentation beforehand. But more on that in a bit.
On the note of organization, abstraction is important! You might have any combination of the following:
The Chrome extension options page
The popup from the Chrome Menu
The windows or tabs you create
The background scripts
And that can get unwieldy. You might also edit the existing tabs or windows in the browser, which you’ll probably want as a separate script too. Note that this tutorial only covers creating your own customized window rather than editing existing windows or tabs.
Alright, now that you know all that up front, let’s get going!
Documentation
TL;DR READ THE DOCS.
A few things to get started:
Read Google’s primer on browser extensions
Have a look at their Getting started tutorial
Check out their overview on Chrome Extensions
This overview discusses the Chrome extension files, architecture, APIs, and communication between pages. Funnily enough, I only discovered the Overview page after creating my extension.
The manifest.json file gives the browser information about the extension, including general information, where to find your extension files and icons, and API permissions required. Here’s what my manifest.json looked like, for example:
https://github.com/jennz0r/eye-rest/blob/master/manifest.json
Because I’m a visual learner, I found the images that describe the extension’s architecture most helpful.
To clarify this diagram, the background.js file is the extension’s event handler. It’s constantly listening for browser events, which you’ll feed to it using the Chrome Extension API. Google says that an effective background script is only loaded when it is needed and unloaded when it goes idle.
The Popup is the little window that appears when you click on an extension’s icon in the Chrome Menu. It consists of markup and scripts, and you can tell the browser where to find it in the manifest.json under page_action: { "default_popup": FILE_NAME_HERE }.
The Options page is exactly as it says. This displays customizable options only visible to the user when they either right-click on the Chrome menu and choose “Options” under an extension. This also consists of markup and scripts, and you can tell the browser where to find it in the manifest.json under options_page: FILE_NAME_HERE.
Content scripts are any scripts that will interact with any web windows or tabs that the user has open. These scripts will also interact with any tabs or windows opened by your extension.
Debugging
A quick note: don’t forget the debugging tutorial!
Just like any other Chrome window, every piece of an extension has an inspector and dev tools. If (read: when) you run into errors (as I did), you’re likely to have several inspector windows open – one for the background script, one for the popup, one for the options, and one for the window or tab the extension is interacting with.
For example, I kept seeing the error “This request exceeds the MAX_WRITE_OPERATIONS_PER_HOUR quota.” Well, it turns out there are limitations on how often you can sync stored information.
Another error I kept seeing was “Alarm delay is less than minimum of 1 minutes. In released .crx, alarm “ALARM_NAME_HERE” will fire in approximately 1 minutes”. Well, it turns out there are minimum interval times for alarms.
Chrome Extension creation definitely benefits from debugging skills. Especially with callbacks and listeners, good old fashioned console.log can really help!
Me adding a ton of `console.log`s while trying to debug my alarms.
Eye Rest Functionality
Ok, so what is the extension I created? Again, it’s a way to rest your eyes every twenty minutes for twenty seconds. So, the basic functionality should look like the following:
If the extension is running AND
If the user has not clicked Pause in the Popup HTML AND
If the counter in the Popup HTML is down to 00:00 THEN
Open a new window with Timer HTML AND
Start a 20 sec countdown in Timer HTML AND
Reset the Popup HTML counter to 20:00
If the Timer HTML is down to 0 sec THEN
Close that window. Rinse. Repeat.
Sounds simple enough, but wow, these timers became convoluted! Of all the Chrome extensions I decided to create, I decided to make one that’s heavily dependent on time, intervals, and having those in sync with each other. In other words, I made this unnecessarily complicated and didn’t realize until I started coding.
For visual reference of my confusion, check out the GitHub repository for Eye Rest. (And yes, it’s a pun.)
API
Now let’s discuss the APIs that I used to build this extension.
Alarms
What even are alarms? I didn’t know either.
Alarms are basically Chrome’s setTimeout and setInterval. They exist because, as Google says…
DOM-based timers, such as window.setTimeout() or window.setInterval(), are not honored in non-persistent background scripts if they trigger when the event page is dormant.
For more information, check out this background migration doc.
One interesting note about alarms in Chrome extensions is that they are persistent. Garbage collection with Chrome extension alarms seems unreliable at best. I didn’t have much luck using the clearAll method to remove alarms I created on previous extension loads or installs. A workaround (read: hack) is to specify a unique alarm name every time your extension is loaded and clearing any other alarms without that unique name.
Background Scripts
For Eye Rest, I have two background scripts. One is my actual initializer and event listener, and the other is a helpers file.
I wanted to share a couple of functions between my Background and Popup scripts. Specifically, the clearAndCreateAlarm function. I wanted my background script to clear any existing alarms, create a new alarm, and add remaining time until the next alarm to local storage immediately upon extension load. To make the function available to the Background script, I added helpers.js as the first item under background > scripts in my manifest.json.
I also wanted my Popup script to do the same things when the user has unpaused the extension’s functionality. To make the function available to the Popup script, I just include the helpers script in the Popup HTML file.
Other APIs
Windows
I use the Windows API to create the Timer window when the time of my alarm is up. The window creation is initiated by my Background script.
One day, while coding late into the evening, I found it very confusing that the window.create method included url as an option. I assumed it was meant to be an external web address. A friend pondered that there must be an option to specify the window’s HTML. Until then, it hadn’t dawned on me that the url could be relative. Duh. I was tired!
I pass the timer.html as the url option, as well as type, size, position, and other visual options.
Storage
Maybe you want to pass information back and forth between the Background script and your Popup script? You can do that using Chrome or local storage. One benefit of using local storage over Chrome’s storage is avoiding quotas and write operation maximums.
I wanted to pass the time at which the latest alarm was set, the time to the next alarm, and whether or not the timer is paused between the Background and Popup scripts. Because the countdown should change every second, it’s quite complicated and requires lots of writes. That’s why I went with the user’s local storage. You can see me getting and setting those variables in my Background, Helper, and Popup scripts. Just search for date, nextAlarmTime, and isPaused.
Declarative Content
The Declarative Content API allows you to show your extension’s page action based on several type of matches, without needing to take a host permission or inject a content script. So you’ll need this to get your extension to work in the browser!
You can see me set this in my Background script. Because I want my extension’s popup to appear on every page one is browsing, I leave the page matchers empty.
There are many more APIs for Chrome apps and extensions, so make sure to surf around and see what features are available!
The Extension
Here’s what my original Popup looked like before I added styles.
And here’s what it looks like with new styles. I guess I’m going for a Nickelodeon feel.
And here’s the Timer window and Popup together!
Publishing
Publishing is a cinch. You just zip up your files, create a new or use an existing Google Developer account, upload the files, add some details, and pay a one time $5 fee. That’s all! Then your extension will be available on the Chrome extension store! Neato :D
My extension is now available for you to install.
Conclusion
I thought creating a time based Chrome Extension would be quick and easy. I was wrong. It was more complicated than I thought! But it’s definitely achievable with some time, persistence, and good ole Google searches.
Eventually, I’d like to add more interactive elements to Eye Rest. For example, hitting the YouTube API to grab a silly or cute video as a reward for looking away during the 20 sec countdown and not closing the timer window. This harkens back to one of my first web projects, Toothtimer, from 2012. Or maybe a way to change the background colors of the Timer and Popup!
Either way, with Eye Rest’s framework built out, I’m feeling fearless about future feature adds! Building this Chrome extension took some broken nails, achy shoulders, and tired eyes, but now Eye Rest can tell me to give my eyes a break every 20 minutes. |
2018 |
Jennifer Wong |
jenniferwong |
2018-12-05T00:00:00+00:00 |
https://24ways.org/2018/my-first-chrome-extension/ |
code |
| 201 |
Lint the Web Forward With Sonarwhal |
Years ago, when I was in a senior in college, much of my web development courses focused on two things: the basics like HTML and CSS (and boy, do I mean basic), and Adobe Flash. I spent many nights writing ActionScript 3.0 to build interactions for the websites that I would add to my portfolio. A few months after graduating, I built one website in Flash for a client, then never again. Flash was dying, and it became obsolete in my résumé and portfolio.
That was my first lesson in the speed at which things change in technology, and what a daunting realization that was as a new graduate looking to enter the professional world. Now, seven years later, I work on the Microsoft Edge team where I help design and build a tool that would have lessened my early career anxieties: sonarwhal.
Sonarwhal is a linting tool, built by and for the web community. The code is open source and lives under the JS Foundation. It helps web developers and designers like me keep up with the constant change in technology while simultaneously teaching how to code better websites.
Introducing sonarwhal’s mascot Nellie
Good web development is hard. It is more than HTML, CSS, and JavaScript: developers are expected to have a grasp of accessibility, performance, security, emerging standards, and more, all while refreshing this knowledge every few months as the web evolves. It’s a lot to keep track of.
Web development is hard
Staying up-to-date on all this knowledge is one of the driving forces for developing this scanning tool. Whether you are just starting out, are a student, or you have over a decade of experience, the sonarwhal team wants to help you build better websites for all browsers.
Currently sonarwhal checks for best practices in five categories: Accessibility, Interoperability, Performance, PWAs, and Security. Each check is called a “rule”. You can configure them and even create your own rules if you need to follow some specific guidelines for your project (e.g. validate analytics attributes, title format of pages, etc.).
You can use sonarwhal in two ways:
An online version, that provides a quick and easy way to scan any public website.
A command line tool, if you want more control over the configuration, or want to integrate it into your development flow.
The Online Scanner
The online version offers a streamlined way to scan a website; just enter a URL and you will get a web page of scan results with a permalink that you can share and revisit at any time.
The online version of sonarwal
When my team works on a new rule, we spend the bulk of our time carefully researching each subject, finding sources, and documenting it rather than writing the rule’s code. Not only is it important that we get you the right results, but we also want you to understand why something is failing. Next to each failing rule you’ll find a link to its detailed documentation, explaining why you should care about it, what exactly we are testing, examples that pass and examples that don’t, and useful links to even more in-depth documentation if you are interested in the subject.
We hope that between reading the documentation and continued use of sonarwhal, developers can stay on top of best practices. As devs continue to build sites and identify recurring issues that appear in their results, they will hopefully start to automatically include those missing elements or fix those pieces of code that are producing errors. This also isn’t a one-way communication: the documentation is not only available on the sonarwhal site, but also on GitHub for editing so you can help us make it even better!
A results report
The current configuration for the online scanner is very strict, so it might hurt your feelings (it did when I first tested it on my personal website). But you can configure sonarwhal to any level of strictness as well as customize the command line tool to your needs!
Sonarwhal’s CLI
The CLI gives you full control of sonarwhal: what rules to use, tweaks to them, domains that are out of your control, and so on. You will need the latest node LTS (v8) or Stable (v9) and your favorite package manager, such as npm:
npm install -g sonarwhal
You can now run sonarwhal from anywhere via:
sonarwhal https://example.com
Using the CLI
The configuration is done via a .sonarwhalrc file. When analyzing a site, if no file is available, you will be prompted to answer a series of questions:
What connector do you want to use? Connectors are what sonarwhal uses to access a website and gather all the information about the requests, resources, HTML, etc. Currently it supports jsdom, Microsoft Edge, and Google Chrome.
What formatter? This is how you want to see the results: summary, stylish, etc. Make sure to look at the full list. Some are concise for, perfect for a quick build assessment, while others are more verbose and informative.
Do you want to use the recommended rules configuration? Rules are the things we are validating. Unless you’ve read the documentation and know what you are doing, first timers should probably use the recommended configuration.
What browsers are you targeting? One of the best features of sonarwhal is that rules can adapt their feedback depending on your targeted browsers, suggesting to add or remove things. For example, the rule “Highest Document Mode” will tell you to add the “X-UA-Compatible” header if IE10 or lower is targeted or remove if the opposite is true.
sonarwhal configuration generator questions
Once you answer all these questions the scan will start and you will have a .sonarwhalrc file similar to the following:
{
"connector": {
"name": "jsdom",
"options": {
"waitFor": 1000
}
},
"formatters": "stylish",
"rulesTimeout": 120000,
"rules": {
"apple-touch-icons": "error",
"axe": "error",
"content-type": "error",
"disown-opener": "error",
"highest-available-document-mode": "error",
"validate-set-cookie-header": "warning",
// ...
}
}
You should see the scan initiate in the command line and within a few seconds the results should start to appear. Remember, the scan results will look different depending on which formatter you selected so try each one out to see which one you like best.
sonarwhal results on my website and hurting my feelings 💔
Now that you have a list of errors, you can get to work improving the site! Note though, that when you scan your website, it scans all the resources on that page and if you’ve added something like analytics or fonts hosted elsewhere, you are unable to change those files. You can configure the CLI to ignore files from certain domains so that you are only getting results for files you are in control of.
The documentation should give enough guidance on how to fix the errors, but if it’s insufficient, please help us and suggest edits or contribute back to it. This is a community effort and chances are someone else will have the same question as you.
When I scanned both my websites, sonarwhal alerted me to not having an Apple Touch Icon. If I search on the web as opposed to using the sonarwhal documentation, the first top 3 results give me outdated information: I need to include many different icon sizes. I don’t need to include all the different size icons that target different devices. Declaring one icon sized 180px x 180px will provide a large enough icon for devices and it will scale down as appropriate for people on older devices.
The information at the top of the search results isn’t always the correct answer to an issue and we don’t want you to have to search through outdated documentation. As sonarwhal’s capabilities expand, the goal is for it to be the one stop shop for helping preflight your website.
The journey up until now and looking forward
On the Microsoft Edge team, we’re passionate about empowering developers to build great websites. Every day we see so many sites come through our issue tracker. (Thanks for filing those bugs, they help us make Microsoft Edge better and better!) Some issues we see over and over are honest mistakes or outdated ‘best practices’ that could be avoided, so we built this tool to help everyone help make the web a better place.
When we decided to create sonarwhal, we wanted to create a tool that would help developers write better and more up-to-date code for their websites. We want sonarwhal to be useful to anyone so, early on, we defined three guiding principles we’ve used along the way:
Community Driven. We build for the community’s best interests. The web belongs to everyone and this project should too. Not only is it open source, we’ve also donated it to the JS Foundation and have an inclusive governance model that welcomes the collaboration of anyone, individual or company.
User Centric. We want to put the user at the center, making sonarwhal configurable for your needs and easy to use no matter what your skill level is.
Collaborative. We didn’t want to reinvent the wheel, so we collaborated with existing tools and services that help developers build for the web. Some examples are aXe, snyk.io, Cloudinary, etc.
This is just the beginning and we still have lots to do. We’re hard at work on a backlog of exciting features for future releases, such as:
New rules for a variety of areas like performance, accessibility, security, progressive web apps, and more.
A plug-in for Visual Studio Code: we want sonarwhal to help you write better websites, and what better moment than when you are in your editor.
Configuration options for the online service: as we fine tune the infrastructure, the rule configuration for our scanner is locked, but we look forward to adding CLI customization options here in the near future.
This is a tool for the web community by the web community so if you are excited about sonarwhal, making a better web, and want to contribute, we have a few issues where you might be able to help. Also, don’t forget to check the rest of the sonarwhal GitHub organization. PRs are always welcome and appreciated!
Let us know what you think about the scanner at @NarwhalNellie on Twitter and we hope you’ll help us lint the web forward! |
2017 |
Stephanie Drescher |
stephaniedrescher |
2017-12-02T00:00:00+00:00 |
https://24ways.org/2017/lint-the-web-forward-with-sonarwhal/ |
code |
| 15 |
Git for Grown-ups |
You are a clever and talented person. You create beautiful designs, or perhaps you have architected a system that even my cat could use. Your peers adore you. Your clients love you. But, until now, you haven’t *&^#^! been able to make Git work. It makes you angry inside that you have to ask your co-worker, again, for that *&^#^! command to upload your work.
It’s not you. It’s Git. Promise.
Yes, this is an article about the popular version control system, Git. But unlike just about every other article written about Git, I’m not going to give you the top five commands that you need to memorize; and I’m not going to tell you all your problems would be solved if only you were using this GUI wrapper or that particular workflow. You see, I’ve come to a grand realization: when we teach Git, we’re doing it wrong.
Let me back up for a second and tell you a little bit about the field of adult education. (Bear with me, it gets good and will leave you feeling both empowered and righteous.) Andragogy, unlike pedagogy, is a learner-driven educational experience. There are six main tenets to adult education:
Adults prefer to know why they are learning something.
The foundation of the learning activities should include experience.
Adults prefer to be able to plan and evaluate their own instruction.
Adults are more interested in learning things which directly impact their daily activities.
Adults prefer learning to be oriented not towards content, but towards problems.
Adults relate more to their own motivators than to external ones.
Nowhere in this list does it include “memorize the five most popular Git commands”. And yet this is how we teach version control: init, add, commit, branch, push. You’re an expert! Sound familiar? In the hierarchy of learning, memorizing commands is the lowest, or most basic, form of learning. At the peak of learning you are able to not just analyze and evaluate a problem space, but create your own understanding in relation to your existing body of knowledge.
“Fine,” I can hear you saying to yourself. “But I’m here to learn about version control.” Right you are! So how can we use this knowledge to master Git? First of all: I give you permission to use Git as a tool. A tool which you control and which you assign tasks to. A tool like a hammer, or a saw. Yes, your mastery of your tools will shape the kinds of interactions you have with your work, and your peers. But it’s yours to control. Git was written by kernel developers for kernel development. The web world has adopted Git, but it is not a tool designed for us and by us. It’s no Sass, y’know? Git wasn’t developed out of our frustration with managing CSS files in an increasingly complex ecosystem of components and atomic design. So, as you work through the next part of this article, give yourself a bit of a break. We’re in this together, and it’s going to be OK.
We’re going to do a little activity. We’re going to create your perfect Git cheatsheet.
I want you to start by writing down a list of all the people on your code team. This list may include:
developers
designers
project managers
clients
Next, I want you to write down a list of all the ways you interact with your team. Maybe you’re a solo developer and you do all the tasks. Maybe you only do a few things. But I want you to write down a list of all the tasks you’re actually responsible for. For example, my list looks like this:
writing code
reviewing code
publishing tested code to your server(s)
troubleshooting broken code
The next list will end up being a series of boxes in a diagram. But to start, I want you to write down a list of your tools and constraints. This list potentially has a lot of noun-like items and verb-like items:
code hosting system (Bitbucket? GitHub? Unfuddle? self-hosted?)
server ecosystem (dev/staging/live)
automated testing systems or review gates
automated build systems (that Jenkins dude people keep referring to)
Brilliant! Now you’ve got your actors and your actions, it’s time to shuffle them into a diagram. There are many popular workflow patterns. None are inherently right or wrong; rather, some are more or less appropriate for what you are trying to accomplish.
Centralized workflow
Everyone saves to a single place. This workflow may mean no version control, or a very rudimentary version control system which only ever has a single copy of the work available to the team at any point in time.
Branching workflow
Everyone works from a copy of the same place, merging their changes into the main copy as their work is completed. Think of the branches as a motorcycle sidecar: they’re along for the ride and probably cannot exist in isolation of the main project for long without serious danger coming to the either the driver or sidecar passenger. Branches are a fundamental concept in version control — they allow you to work on new features, bug fixes, and experimental changes within a single repository, but without forcing the changes onto others working from the same branch.
Forking workflow
Everyone works from their own, independent repository. A fork is an exact duplicate of a repository that a developer can make their own changes to. It can be kept up to date with additional changes made in other repositories, but it cannot force its changes onto another’s repository. A fork is a complete repository which can use its own workflow strategies. If developers wish to merge their work with the main project, they must make a request of some kind (submit a patch, or a pull request) which the project collaborators may choose to adopt or reject. This workflow is popular for open source projects as it enforces a review process.
Gitflow workflow
A specific workflow convention which includes five streams of parallel coding efforts: master, development, feature branches, release branches, and hot fixes. This workflow is often simplified down to a few elements by web teams, but may be used wholesale by software product teams. The original article describing this workflow was written by Vincent Driessen back in January 2010.
But these workflows aren’t about you yet, are they? So let’s make the connections.
From the list of people on your team you identified earlier, draw a little circle. Give each of these circles some eyes and a smile. Now I want you to draw arrows between each of these people in the direction that code (ideally) flows. Does your designer create responsive prototypes which are pushed to the developer? Draw an arrow to represent this.
Chances are high that you don’t just have people on your team, but you also have some kind of infrastructure. Hopefully you wrote about it earlier. For each of the servers and code repositories in your infrastructure, draw a square. Now, add to your diagram the relationships between the people and each of the machines in the infrastructure. Who can deploy code to the live server? How does it really get there? I bet it goes through some kind of code hosting system, such as GitHub. Draw in those arrows.
But wait!
The code that’s on your development machine isn’t the same as the live code. This is where we introduce the concept of a branch in version control. In Git, a repository contains all of the code (sort of). A branch is a fragment of the code that has been worked on in isolation to the other branches within a repository. Often branches will have elements in common. When we compare two (or more) branches, we are asking about the difference (or diff) between these two slivers. Often the master branch is used on production, and the development branch is used on our dev server. The difference between these two branches is the untested code that is not yet deployed.
On your diagram, see if you can colour-code according to the branch names at each of the locations within your infrastructure. You might find it useful to make a few different copies of the diagram to isolate each of the tasks you need to perform. For example: our team has a peer review process that each branch must go through before it is merged into the shared development branch.
Finally, we are ready to add the Git commands necessary to make sense of the arrows in our diagram. If we are bringing code to our own workstation we will issue one of the following commands: clone (the first time we bring code to our workstation) or pull. Remembering that a repository contains all branches, we will issue the command checkout to switch from one branch to another within our own workstation. If we want to share a particular branch with one of our team mates, we will push this branch back to the place we retrieved it from (the origin). Along each of the arrows in your diagram, write the name of the command you are are going to use when you perform that particular task.
From here, it’s up to you to be selfish. Before asking Git what command it would like you to use, sketch the diagram of what you want. Git is your tool, you are not Git’s tool. Draw the diagram. Communicate your tasks with your team as explicitly as you can. Insist on being a selfish adult learner — demand that others explain to you, in ways that are relevant to you, how to do the things you need to do today. |
2013 |
Emma Jane Westby |
emmajanewestby |
2013-12-04T00:00:00+00:00 |
https://24ways.org/2013/git-for-grownups/ |
code |
| 257 |
The (Switch)-Case for State Machines in User Interfaces |
You’re tasked with creating a login form. Email, password, submit button, done.
“This will be easy,” you think to yourself.
Login form by Selecto
You’ve made similar forms many times in the past; it’s essentially muscle memory at this point. You’re working closely with a designer, who gives you a beautiful, detailed mockup of a login form. Sure, you’ll have to translate the pixels to meaningful, responsive CSS values, but that’s the least of your problems.
As you’re writing up the HTML structure and CSS layout and styles for this form, you realize that you don’t know what the successful “logged in” page looks like. You remind the designer, who readily gives it to you. But then you start thinking more and more about how the login form is supposed to work.
What if login fails? Where do those errors show up?
Should we show errors differently if the user forgot to enter their email, or password, or both?
Or should the submit button be disabled?
Should we validate the email field?
When should we show validation errors – as they’re typing their email, or when they move to the password field, or when they click submit? (Note: many, many login forms are guilty of this.)
When should the errors disappear?
What do we show during the login process? Some loading spinner?
What if loading takes too long, or a server error occurs?
Many more questions come up, and you (and your designer) are understandably frustrated. The lack of upfront specification opens the door to scope creep, which readily finds itself at home in all the unexplored edge cases.
Modeling Behavior
Describing all the possible user flows and business logic of an application can become tricky. Ironically, user stories might not tell the whole story – they often leave out potential edge-cases or small yet important bits of information.
However, one important (and very old) mathematical model of computation can be used for describing the behavior and all possible states of a user interface: the finite state machine.
The general idea, as it applies to user interfaces, is that all of our applications can be described (at some level of abstraction) as being in one, and only one, of a finite number of states at any given time. For example, we can describe our login form above in these states:
start - not submitted yet
loading - submitted and logging in
success - successfully logged in
error - login failed
Additionally, we can describe an application as accepting a finite number of events – that is, all the possible events that can be “sent” to the application, either from the user or some other external entity:
SUBMIT - pressing the submit button
RESOLVE - the server responds, indicating that login is successful
REJECT - the server responds, indicating that login failed
Then, we can combine these states and events to describe the transitions between them. That is, when the application is in one state, an an event occurs, we can specify what the next state should be:
From the start state, when the SUBMIT event occurs, the app should be in the loading state.
From the loading state, when the RESOLVE event occurs, login succeeded and the app should be in the success state.
If login fails from the loading state (i.e., when the REJECT event occurs), the app should be in the error state.
From the error state, the user should be able to retry login: when the SUBMIT event occurs here, the app should go to the loading state.
Otherwise, if any other event occurs, don’t do anything and stay in the same state.
That’s a pretty thorough description, similar to a user story! It’s also a bit more symbolic than a user story (e.g., “when the SUBMIT event occurs” instead of “when the user presses the submit button”), and that’s for a reason. By representing states, events, and transitions symbolically, we can visualize what this state machine looks like:
Every state is represented by a box, and every event is connected to a transition arrow that connects two states. This makes it intuitive to follow the flow and understand what the next state should be given the current state and an event.
From Visuals to Code
Drawing a state machine doesn’t require any special software; in fact, using paper and pencil (in case anything changes!) does the job quite nicely. However, one common problem is handoff: it doesn’t matter how detailed a user story or how well-designed a visualization is, it eventually has to be coded in order for it to become part of a real application.
With the state machine model described above, the same visual description can be mapped directly to code. Traditionally, and as the title suggests, this is done using switch/case statements:
function loginMachine(state, event) {
switch (state) {
case 'start':
if (event === 'SUBMIT') {
return 'loading';
}
break;
case 'loading':
if (event === 'RESOLVE') {
return 'success';
} else if (event === 'REJECT') {
return 'error';
}
break;
case 'success':
// Accept no further events
break;
case 'error':
if (event === 'SUBMIT') {
return 'loading';
}
break;
default:
// This should never occur
return undefined;
}
}
console.log(loginMachine('start', 'SUBMIT'));
// => 'loading'
This is fine (I suppose) but personally, I find it much easier to use objects:
const loginMachine = {
initial: "start",
states: {
start: {
on: { SUBMIT: 'loading' }
},
loading: {
on: {
REJECT: 'error',
RESOLVE: 'success'
}
},
error: {
on: {
SUBMIT: 'loading'
}
},
success: {}
}
};
function transition(state, event) {
return machine
.states[state] // Look up the state
.on[event] // Look up the next state based on the event
|| state; // If not found, return the current state
}
console.log(transition('start', 'SUBMIT'));
As you might have noticed, the loginMachine is a plain JS object, and can be written in JSON. This is important because it allows the machine to be visualized by a 3rd-party tool, as demonstrated here:
A Common Language Between Designers and Developers
Although finite state machines are a fundamental part of computer science, they have an amazing potential to bridge the application specification gap between designers and developers, as well as project managers, stakeholders, and more. By designing a state machine visually and with code, designers and developers alike can:
identify all possible states, and potentially missing states
describe exactly what should happen when an event occurs on a given state, and prevent that event from having unintended side-effects in other states (ever click a submit button more than once?)
eliminate impossible states and identify states that are “unreachable” (have no entry transition) or “sunken” (have no exit transition)
add features with full confidence of knowing what other states it might affect
simplify redundant states or complex user flows
create test paths for almost every possible user flow, and easily identify edge cases
collaborate better by understanding the entire application model equally.
Not a New Idea
I’m not the first to suggest that state machines can help bridge the gap between design and development.
Vince MingPu Shao wrote an article about designing UI states and communicating with developers effectively with finite state machines
User flow diagrams, which visually describe the paths that a user can take through an app to achieve certain goals, are essentially state machines. Numerous tools, from Sketch plugins to standalone apps, exist for creating them.
In 1999, Ian Horrocks wrote a book titled “Constructing the User Interface with Statecharts”, which takes state machines to the next level and describes the inherent difficulties (and solutions) with creating complex UIs. The ideas in the book are still relevant today.
More than a decade earlier, David Harel published “Statecharts: A Visual Formalism for Complex Systems”, in which the statechart - an extended hierarchical state machine model - is born.
State machines and statecharts have been used for complex systems and user interfaces, both physical and digital, for decades, and are especially prevalent in other industries, such as game development and embedded electronic systems. Even NASA uses statecharts for the Curiosity Rover and more, citing many benefits:
Visualized modeling
Precise diagrams
Automatic code generation
Comprehensive test coverage
Accommodation of late-breaking requirements changes
Moving Forward
It’s time that we improve how we communicate between designers and developers, much less improve the way we develop UIs to deliver the best, bug-free, optimal user experience. There is so much more to state machines and statecharts than just being a different way of designing and coding. For more resources:
The World of Statecharts is a comprehensive guide by Erik Mogensen in using statecharts in your applications
The Statechart Community on Spectrum is always full of interesting ideas and questions related to state machines, statecharts, and software modeling
I gave a talk at React Rally over a year ago about how state machines (finite automata) can improve the way we develop applications. The latest one is from Reactive Conf, where I demonstrate how statecharts can be used to automatically generate test cases.
I have also been working on XState, which is a library for “state machines and statecharts for the modern web”. You can create and visualize statecharts in JavaScript, and use them in any framework (and soon enough, multiple different languages).
I’m excited about the future of developing web and mobile applications with statecharts, especially with regard to faster design/development cycles, auto-generated testing, better error prevention, comprehensive analytics, and even the use of model-based reinforcement learning and artificial intelligence to greatly improve the user experience. |
2018 |
David Khourshid |
davidkhourshid |
2018-12-12T00:00:00+00:00 |
https://24ways.org/2018/state-machines-in-user-interfaces/ |
code |
| 336 |
Practical Microformats with hCard |
You’ve probably heard about microformats over the last few months. You may have even read the easily digestible introduction at Digital Web Magazine, but perhaps you’ve not found time to actually implement much yet. That’s understandable, as it can sometimes be difficult to see exactly what you’re adding by applying a microformat to a page. Sure, you’re semantically enhancing the information you’re marking up, and the Semantic Web is a great idea and all, but what benefit is it right now, today?
Well, the answer to that question is simple: you’re adding lots of information that can be and is being used on the web here and now. The big ongoing battle amongst the big web companies if one of territory over information. Everyone’s grasping for as much data as possible. Some of that information many of us are cautious to give away, but a lot of is happy to be freely available. Of the data you’re giving away, it makes sense to give it as much meaning as possible, thus enabling anyone from your friends and family to the giant search company down the road to make the most of it.
Ok, enough of the waffle, let’s get working.
Introducing hCard
You may have come across hCard. It’s a microformat for describing contact information (or really address book information) from within your HTML. It’s based on the vCard format, which is the format the contacts/address book program on your computer uses. All the usual fields are available – name, address, town, website, email, you name it.
If you’re running Firefox and Greasemonkey (or if you can, just to try this out), install this user script. What it does is look for instances of the hCard microformat in a page, and then add in a link to pass any hCards it finds to a web service which will convert it to a vCard. Take a look at the About the author box at the bottom of this article. It’s a hCard, so you should be able to click the icon the user script inserts and add me to your Outlook contacts or OS X Address Book with just a click.
So microformats are useful after all. Free microformats all round!
Implementing hCard
This is the really easy bit. All the hCard microformat is, is a bunch of predefined class names that you apply to the markup you’ve probably already got around your contact information. Let’s take the example of the About the author box from this article. Here’s how the markup looks without hCard:
<div class="bio">
<h3>About the author</h3>
<p>Drew McLellan is a web developer, author and no-good swindler from
just outside London, England. At the
<a href="http://www.webstandards.org/">Web Standards Project</a> he works
on press, strategy and tools. Drew keeps a
<a href="http://www.allinthehead.com/">personal weblog</a> covering web
development issues and themes.</p>
</div>
This is a really simple example because there’s only two key bits of address book information here:- my name and my website address. Let’s push it a little and say that the Web Standards Project is the organisation I work for – that gives us Name, Company and URL.
To kick off an hCard, you need a containing object with a class of vcard. The div I already have with a class of bio is perfect for this – all it needs to do is contain the rest of the contact information.
The next thing to identify is my name. hCard uses a class of fn (meaning Full Name) to identify a name. As is this case there’s no element surrounding my name, we can just use a span. These changes give us:
<div class="bio vcard">
<h3>About the author</h3>
<p><span class="fn">Drew McLellan</span> is a web developer...
The two remaining items are my URL and the organisation I belong to. The class names designated for those are url and org respectively. As both of those items are links in this case, I can apply the classes to those links. So here’s the finished hCard.
<div class="bio vcard">
<h3>About the author</h3>
<p><span class="fn">Drew McLellan</span> is a web developer, author and
no-good swindler from just outside London, England.
At the <a class="org" href="http://www.webstandards.org/">Web Standards Project</a>
he works on press, strategy and tools. Drew keeps a
<a class="url" href="http://www.allinthehead.com/">personal weblog</a> covering web
development issues and themes.</p>
</div>
OK, that was easy. By just applying a few easy class names to the HTML I was already publishing, I’ve implemented an hCard that right now anyone with Greasemonkey can click to add to their address book, that Google and Yahoo! and whoever else can index and work out important things like which websites are associated with my name if they so choose (and boy, will they so choose), and in the future who knows what. In terms of effort, practically nil.
Where next?
So that was a trivial example, but to be honest it doesn’t really get much more complex even with the most pernickety permutations. Because hCard is based on vCard (a mature and well thought-out standard), it’s all tried and tested. Here’s some good next steps.
Play with the hCard Creator
Take a deep breath and read the spec
Start implementing hCard as you go on your own projects – it takes very little time
hCard is just one of an ever-increasing number of microformats. If this tickled your fancy, I suggest subscribing to the microformats site in your RSS reader to keep in touch with new developments.
What’s the take-away?
The take-away is this. They may sound like just more Web 2-point-HoHoHo hype, but microformats are a well thought-out, and easy to implement way of adding greater depth to the information you publish online. They have some nice benefits right away – certainly at geek-level – but in the longer term they become much more significant. We’ve been at this long enough to know that the web has a long, long memory and that what you publish today will likely be around for years. But putting the extra depth of meaning into your documents now you can help guard that they’ll continue to be useful in the future, and not just a bunch of flat ASCII. |
2005 |
Drew McLellan |
drewmclellan |
2005-12-06T00:00:00+00:00 |
https://24ways.org/2005/practical-microformats-with-hcard/ |
code |
| 153 |
JavaScript Internationalisation |
or: Why Rudolph Is More Than Just a Shiny Nose
Dunder sat, glumly staring at the computer screen.
“What’s up, Dunder?” asked Rudolph, entering the stable and shaking off the snow from his antlers.
“Well,” Dunder replied, “I’ve just finished coding the new reindeer intranet Santa Claus asked me to do. You know how he likes to appear to be at the cutting edge, talking incessantly about Web 2.0, AJAX, rounded corners; he even spooked Comet recently by talking about him as if he were some pushy web server.
“I’ve managed to keep him happy, whilst also keeping it usable, accessible, and gleaming — and I’m still on the back row of the sleigh! But anyway, given the elves will be the ones using the site, and they come from all over the world, the site is in multiple languages. Which is great, except when it comes to the preview JavaScript I’ve written for the reindeer order form. Here, have a look…”
As he said that, he brought up the textileRef:8234272265470b85d91702:linkStartMarker:“order
form in French”:/examples/javascript-internationalisation/initial.fr.html on the screen. (Same in English).
“Looks good,” said Rudolph.
“But if I add some items,” said Dunder, “the preview appears in English, as it’s hard-coded in the JavaScript. I don’t want separate code for each language, as that’s just silly — I thought about just having if statements, but that doesn’t scale at all…”
“And there’s more, you aren’t displaying large numbers in French properly, either,” added Rudolph, who had been playing and looking at part of the source code:
function update_text() {
var hay = getValue('hay');
var carrots = getValue('carrots');
var bells = getValue('bells');
var total = 50 * bells + 30 * hay + 10 * carrots;
var out = 'You are ordering '
+ pretty_num(hay) + ' bushel' + pluralise(hay) + ' of hay, '
+ pretty_num(carrots) + ' carrot' + pluralise(carrots)
+ ', and ' + pretty_num(bells) + ' shiny bell' + pluralise(bells)
+ ', at a total cost of <strong>' + pretty_num(total)
+ '</strong> gold pieces. Thank you.';
document.getElementById('preview').innerHTML = out;
}
function pretty_num(n) {
n += '';
var o = '';
for (i=n.length; i>3; i-=3) {
o = ',' + n.slice(i-3, i) + o;
}
o = n.slice(0, i) + o;
return o;
}
function pluralise(n) {
if (n!=1) return 's';
return '';
}
“Oh, botheration!” cried Dunder. “This is just so complicated.”
“It doesn’t have to be,” said Rudolph, “you just have to think about things in a slightly different way from what you’re used to. As we’re only a simple example, we won’t be able to cover all possibilities, but for starters, we need some way of providing different information to the script dependent on the language. We’ll create a global i18n object, say, and fill it with the correct language information. The first variable we’ll need will be a thousands separator, and then we can change the pretty_num function to use that instead:
function pretty_num(n) {
n += '';
var o = '';
for (i=n.length; i>3; i-=3) {
o = i18n.thousands_sep + n.slice(i-3, i) + o;
}
o = n.slice(0, i) + o;
return o;
}
“The i18n object will also contain our translations, which we will access through a function called _() — that’s just an underscore. Other languages have a function of the same name doing the same thing. It’s very simple:
function _(s) {
if (typeof(i18n)!='undefined' && i18n[s]) {
return i18n[s];
}
return s;
}
“So if a translation is available and provided, we’ll use that; otherwise we’ll default to the string provided — which is helpful if the translation begins to lag behind the site’s text at all, as at least something will be output.”
“Got it,” said Dunder. “ _('Hello Dunder') will print the translation of that string, if one exists, ‘Hello Dunder’ if not.”
“Exactly. Moving on, your plural function breaks even in English if we have a word where the plural doesn’t add an s — like ‘children’.”
“You’re right,” said Dunder. “How did I miss that?”
“No harm done. Better to provide both singular and plural words to the function and let it decide which to use, performing any translation as well:
function pluralise(s, p, n) {
if (n != 1) return _(p);
return _(s);
}
“We’d have to provide different functions for different languages as we employed more elves and got more complicated — for example, in Polish, the word ‘file’ pluralises like this: 1 plik, 2-4 pliki, 5-21 plików, 22-24 pliki, 25-31 plików, and so on.” (More information on plural forms)
“Gosh!”
“Next, as different languages have different word orders, we must stop using concatenation to construct sentences, as it would be impossible for other languages to fit in; we have to keep coherent strings together. Let’s rewrite your update function, and then go through it:
function update_text() {
var hay = getValue('hay');
var carrots = getValue('carrots');
var bells = getValue('bells');
var total = 50 * bells + 30 * hay + 10 * carrots;
hay = sprintf(pluralise('%s bushel of hay', '%s bushels of hay', hay), pretty_num(hay));
carrots = sprintf(pluralise('%s carrot', '%s carrots', carrots), pretty_num(carrots));
bells = sprintf(pluralise('%s shiny bell', '%s shiny bells', bells), pretty_num(bells));
var list = sprintf(_('%s, %s, and %s'), hay, carrots, bells);
var out = sprintf(_('You are ordering %s, at a total cost of <strong>%s</strong> gold pieces.'),
list, pretty_num(total));
out += ' ';
out += _('Thank you.');
document.getElementById('preview').innerHTML = out;
}
“ sprintf is a function in many other languages that, given a format string and some variables, slots the variables into place within the string. JavaScript doesn’t have such a function, so we’ll write our own. Again, keep it simple for now, only integers and strings; I’m sure more complete ones can be found on the internet.
function sprintf(s) {
var bits = s.split('%');
var out = bits[0];
var re = /^([ds])(.*)$/;
for (var i=1; i<bits.length; i++) {
p = re.exec(bits[i]);
if (!p || arguments[i]==null) continue;
if (p[1] == 'd') {
out += parseInt(arguments[i], 10);
} else if (p[1] == 's') {
out += arguments[i];
}
out += p[2];
}
return out;
}
“Lastly, we need to create one file for each language, containing our i18n object, and then include that from the relevant HTML. Here’s what a blank translation file would look like for your order form:
var i18n = {
thousands_sep: ',',
"%s bushel of hay": '',
"%s bushels of hay": '',
"%s carrot": '',
"%s carrots": '',
"%s shiny bell": '',
"%s shiny bells": '',
"%s, %s, and %s": '',
"You are ordering %s, at a total cost of <strong>%s</strong> gold pieces.": '',
"Thank you.": ''
};
“If you implement this across the intranet, you’ll want to investigate the xgettext program, which can automatically extract all strings that need translating from all sorts of code files into a standard .po file (I think Python mode works best for JavaScript). You can then use a different program to take the translated .po file and automatically create the language-specific JavaScript files for us.” (e.g. German .po file for PledgeBank, mySociety’s .po-.js script, example output)
With a flourish, Rudolph finished editing. “And there we go, localised JavaScript in English, French, or German, all using the same main code.”
“Thanks so much, Rudolph!” said Dunder.
“I’m not just a pretty nose!” Rudolph quipped. “Oh, and one last thing — please comment liberally explaining the context of strings you use. Your translator will thank you, probably at the same time as they point out the four hundred places you’ve done something in code that only works in your language and no-one else’s…”
Thanks to Tim Morley and Edmund Grimley Evans for the French and German translations respectively. |
2007 |
Matthew Somerville |
matthewsomerville |
2007-12-08T00:00:00+00:00 |
https://24ways.org/2007/javascript-internationalisation/ |
code |
| 70 |
Bringing Your Code to the Streets |
— or How to Be a Street VJ
Our amazing world of web code is escaping out of the browser at an alarming rate and appearing in every aspect of the environment around us. Over the past few years we’ve already seen JavaScript used server-side, hardware coded with JavaScript, a rise of native style and desktop apps created with HTML, CSS and JavaScript, and even virtual reality (VR) is getting its fair share of front-end goodness.
You can go ahead and play with JavaScript-powered hardware such as the Tessel or the Espruino to name a couple. Just check out the Tessel project page to see JavaScript in the world of coffee roasting or sleep tracking your pet. With the rise of the internet of things, JavaScript can be seen collecting information on flooding among other things. And if that’s not enough ‘outside the browser’ implementations, Node.js servers can even be found in aircraft!
I previously mentioned VR and with three.js’s extra StereoEffect.js module it’s relatively simple to get browser 3D goodness to be Google Cardboard-ready, and thus set the stage for all things JavaScript and VR. It’s been pretty popular in the art world too, with interactive works such as Seb Lee-Delisle’s Lunar Trails installation, featuring the old arcade game Lunar Lander, which you can now play in your browser while others watch (it is the web after all). The Science Museum in London held Chrome Web Lab, an interactive exhibition featuring five experiments, showcasing the magic of the web. And it’s not even the connectivity of the web that’s being showcased; we can even take things offline and use web code for amazing things, such as fighting Ebola.
One thing is for sure, JavaScript is awesome. Hell, if you believe those telly programs (as we all do), JavaScript can even take down the stock market, purely through the witchcraft of canvas! Go JavaScript!
Now it’s our turn
So I wanted to create a little project influenced by this theme, and as it’s Christmas, take it to the streets for a little bit of party fun! Something that could take code anywhere. Here’s how I made a portable visual projection pack, a piece of video mixing software and created some web-coded street art.
Step one: The equipment
You will need:
One laptop: with HDMI output and a modern browser installed, such as Google Chrome.
One battery-powered mini projector: I’ve used a Texas Instruments DLP; for its 120 lumens it was the best cost-to-lumens ratio I could find.
One MIDI controller (optional): mine is an ICON iDJ as it suits mixing visuals. However, there is more affordable hardware on the market such as an Akai LPD8 or a Korg nanoPAD2. As you’ll see in the article, this is optional as it can be emulated within the software.
A case to carry it all around in.
Step two: The software
The projected visuals, I imagined, could be anything you can create within a browser, whether that be simple HTML and CSS, images, videos, SVG or canvas. The only requirement I have is that they move or change with sound and that I can mix any one visual into another.
You may remember a couple of years ago I created a demo on this very site, allowing audio-triggered visuals from the ambient sounds your device mic was picking up. That was a great starting point – I used that exact method to pick up the audio and thus the first requirement was complete. If you want to see some more examples of visuals I’ve put together for this, there’s a showcase on CodePen.
The second requirement took a little more thought. I needed two screens, which could at any point show any of the visuals I had coded, but could be mixed from one into the other and back again. So let’s start with two divs, both absolutely positioned so they’re on top of each other, but at the start the second screen’s opacity is set to zero.
Now all we need is a slider, which when moved from one side to the other slowly sets the second screen’s opacity to 1, thereby fading it in.
See the Pen Mixing Screens (Software Version) by Rumyra (@Rumyra) on CodePen.
Mixing Screens (CodePen)
As you saw above, I have a MIDI controller and although the software method works great, I’d quite like to make use of this nifty piece of kit. That’s easily done with the Web MIDI API. All I need to do is call it, and when I move one of the sliders on the controller (I’ve allocated the big cross fader in the middle for this), pick up on the change of value and use that to control the opacity instead.
var midi, data;
// start talking to MIDI controller
if (navigator.requestMIDIAccess) {
navigator.requestMIDIAccess({
sysex: false
}).then(onMIDISuccess, onMIDIFailure);
} else {
alert(“No MIDI support in your browser.”);
}
// on success
function onMIDISuccess(midiData) {
// this is all our MIDI data
midi = midiData;
var allInputs = midi.allInputs.values();
// loop over all available inputs and listen for any MIDI input
for (var input = allInputs.next(); input && !input.done; input = allInputs.next()) {
// when a MIDI value is received call the onMIDIMessage function
input.value.onmidimessage = onMIDIMessage;
}
}
function onMIDIMessage(message) {
// data comes in the form [command/channel, note, velocity]
data = message.data;
// Opacity change for screen. The cross fader values are [176, 8, {0-127}]
if ( (data[0] === 176) && (data[1] === 8) ) {
// this value will change as the fader is moved
var opacity = data[2]/127;
screenTwo.style.opacity = opacity;
}
}
The final code was slightly more complicated than this, as I decided to switch the two screens based on the frequencies of the sound that was playing, and use the cross fader to depict the frequency threshold value. This meant they flickered in and out of each other, rather than just faded. There’s a very rough-and-ready first version of the software on GitHub.
Phew, Great! Now we need to get all this to the streets!
Step three: Portable kit
Did you notice how I mentioned a case to carry it all around in? I wanted the case to be morphable, so I could use the equipment from it too, a sort of bag-to-usherette-tray-type affair. Well, I had an unused laptop bag…
I strengthened it with some MDF, so when I opened the bag it would hold like a tray where the laptop and MIDI controller would sit. The projector was Velcroed to the external pocket of the bag, so when it was a tray it would project from underneath. I added two durable straps, one for my shoulders and one round my waist, both attached to the bag itself. There was a lot of cutting and trimming. As it was a laptop bag it was pretty thick to start and sewing was tricky. However, I only broke one sewing machine needle; I’ve been known to break more working with leather, so I figured I was doing well. By the way, you can actually buy usherette trays, but I just couldn’t resist hacking my own :)
Step four: Take to the streets
First, make sure everything is charged – everything – a lot! The laptop has to power both the MIDI controller and the projector, and although I have a mobile phone battery booster pack, that’ll only charge the projector should it run out. I estimated I could get a good hour of visual artistry before I needed to worry, though.
I had a couple of ideas about time of day and location. Here in the UK at this time of year, it gets dark around half past four, so I could easily head out in a city around 5pm and it would be dark enough for the projections to be seen pretty well. I chose Bristol, around the waterfront, as there were some interesting locations to try it out in. The best was Millennium Square: busy but not crowded and plenty of surfaces to try projecting on to.
My first time out with the portable audio/visual pack (PAVP as it will now be named) was brilliant. I played music and projected visuals, like a one-woman band of A/V!
You might be thinking what the point of this was, besides, of course, it being a bit of fun. Well, this project got me to look at canvas and SVG more closely. The Web MIDI API was really interesting; MIDI as a data format has some great practical uses. I think without our side projects we may not have all these wonderful uses for our everyday code. Not only do they remind us coding can, and should, be fun, they also help us learn and grow as makers.
My favourite part? When I was projecting into a water feature in Millennium Square. For those who are familiar, you’ll know it’s like a wall of water so it produced a superb effect. I drew quite a crowd and a kid came to stand next to me and all I could hear him say with enthusiasm was, ‘Oh wow! That’s so cool!’
Yes… yes, kid, it was cool. Making things with code is cool.
Massive thanks to the lovely Drew McLellan for his incredibly well-directed photography, and also Simon Johnson who took a great hand in perfecting the kit while it was attached. |
2015 |
Ruth John |
ruthjohn |
2015-12-06T00:00:00+00:00 |
https://24ways.org/2015/bringing-your-code-to-the-streets/ |
code |
| 162 |
Conditional Love |
“Browser.” The four-letter word of web design.
I mean, let’s face it: on the good days, when things just work in your target browsers, it’s marvelous. The air smells sweeter, birds’ songs sound more melodious, and both your design and your code are looking sharp.
But on the less-than-good days (which is, frankly, most of them), you’re compelled to tie up all your browsers in a sack, heave them into the nearest river, and start designing all-imagemap websites. We all play favorites, after all: some will swear by Firefox, Opera fans are allegedly legion, and others still will frown upon anything less than the latest WebKit nightly.
Thankfully, we do have an out for those little inconsistencies that crop up when dealing with cross-browser testing: CSS patches.
Spare the Rod, Hack the Browser
Before committing browsercide over some rendering bug, a designer will typically reach for a snippet of CSS fix the faulty browser. Historically referred to as “hacks,” I prefer Dan Cederholm’s more client-friendly alternative, “patches”.
But whatever you call them, CSS patches all work along the same principle: supply the proper property value to the good browsers, while giving higher maintenance other browsers an incorrect value that their frustrating idiosyncratic rendering engine can understand.
Traditionally, this has been done either by exploiting incomplete CSS support:
#content {
height: 1%; // Let's force hasLayout for old versions of IE.
line-height: 1.6;
padding: 1em;
}
html>body #content {
height: auto; // Modern browsers get a proper height value.
}
or by exploiting bugs in their rendering engine to deliver alternate style rules:
#content p {
font-size: .8em;
/* Hide from Mac IE5 \*/
font-size: .9em;
/* End hiding from Mac IE5 */
}
We’ve even used these exploits to serve up whole stylesheets altogether:
@import url("core.css");
@media tty {
i{content:"\";/*" "*/}} @import 'windows-ie5.css'; /*";}
}/* */
The list goes on, and on, and on. For every browser, for every bug, there’s a patch available to fix some rendering bug.
But after some time working with standards-based layouts, I’ve found that CSS patches, as we’ve traditionally used them, become increasingly difficult to maintain. As stylesheets are modified over the course of a site’s lifetime, inline fixes we’ve written may become obsolete, making them difficult to find, update, or prune out of our CSS. A good patch requires a constant gardener to ensure that it adds more than just bloat to a stylesheet, and inline patches can be very hard to weed out of a decently sized CSS file.
Giving the Kids Separate Rooms
Since I joined Airbag Industries earlier this year, every project we’ve worked on has this in the head of its templates:
<link rel="stylesheet" href="-/css/screen/main.css" type="text/css" media="screen, projection" />
<!--[if lt IE 7]>
<link rel="stylesheet" href="-/css/screen/patches/win-ie-old.css" type="text/css" media="screen, projection" />
<![endif]-->
<!--[if gte IE 7]>
<link rel="stylesheet" href="-/css/screen/patches/win-ie7-up.css" type="text/css" media="screen, projection" />
<![endif]-->
The first element is, simply enough, a link element that points to the project’s main CSS file. No patches, no hacks: just pure, modern browser-friendly style rules. Which, nine times out of ten, will net you a design that looks like spilled eggnog in various versions of Internet Explorer.
But don’t reach for the mulled wine quite yet. Immediately after, we’ve got a brace of conditional comments wrapped around two other link elements. These odd-looking comments allow us to selectively serve up additional stylesheets just to the version of IE that needs them. We’ve got one for IE 6 and below:
<!--[if lt IE 7]>
<link rel="stylesheet" href="-/css/screen/patches/win-ie-old.css" type="text/css" media="screen, projection" />
<![endif]-->
And another for IE7 and above:
<!--[if gte IE 7]>
<link rel="stylesheet" href="-/css/screen/patches/win-ie7-up.css" type="text/css" media="screen, projection" />
<![endif]-->
Microsoft’s conditional comments aren’t exactly new, but they can be a valuable alternative to cooking CSS patches directly into a master stylesheet. And though they’re not a W3C-approved markup structure, I think they’re just brilliant because they innovate within the spec: non-IE devices will assume that the comments are just that, and ignore the markup altogether.
This does, of course, mean that there’s a little extra markup in the head of our documents. But this approach can seriously cut down on the unnecessary patches served up to the browsers that don’t need them. Namely, we no longer have to write rules like this in our main stylesheet:
#content {
height: 1%; // Let's force hasLayout for old versions of IE.
line-height: 1.6;
padding: 1em;
}
html>body #content {
height: auto; // Modern browsers get a proper height value.
}
Rather, we can simply write an un-patched rule in our core stylesheet:
#content {
line-height: 1.6;
padding: 1em;
}
And now, our patch for older versions of IE goes in—you guessed it—the stylesheet for older versions of IE:
#content {
height: 1%;
}
The hasLayout patch is applied, our design’s repaired, and—most importantly—the patch is only seen by the browser that needs it. The “good” browsers don’t have to incur any added stylesheet weight from our IE patches, and Internet Explorer gets the conditional love it deserves.
Most importantly, this “compartmentalized” approach to CSS patching makes it much easier for me to patch and maintain the fixes applied to a particular browser. If I need to track down a bug for IE7, I don’t need to scroll through dozens or hundreds of rules in my core stylesheet: instead, I just open the considerably slimmer IE7-specific patch file, make my edits, and move right along.
Even Good Children Misbehave
While IE may occupy the bulk of our debugging time, there’s no denying that other popular, modern browsers will occasionally disagree on how certain bits of CSS should be rendered. But without something as, well, pimp as conditional comments at our disposal, how do we bring the so-called “good browsers” back in line with our design?
Assuming you’re loving the “one patch file per browser” model as much as I do, there’s just one alternative: JavaScript.
function isSaf() {
var isSaf = (document.childNodes && !document.all && !navigator.taintEnabled && !navigator.accentColorName) ? true : false;
return isSaf;
}
function isOp() {
var isOp = (window.opera) ? true : false;
return isOp;
}
Instead of relying on dotcom-era tactics of parsing the browser’s user-agent string, we’re testing here for support for various DOM objects, whose presence or absence we can use to reasonably infer the browser we’re looking at. So running the isOp() function, for example, will test for Opera’s proprietary window.opera object, and thereby accurately tell you if your user’s running Norway’s finest browser.
With scripts such as isOp() and isSaf() in place, you can then reasonably test which browser’s viewing your content, and insert additional link elements as needed.
function loadPatches(dir) {
if (document.getElementsByTagName() && document.createElement()) {
var head = document.getElementsByTagName("head")[0];
if (head) {
var css = new Array();
if (isSaf()) {
css.push("saf.css");
} else if (isOp()) {
css.push("opera.css");
}
if (css.length) {
var link = document.createElement("link");
link.setAttribute("rel", "stylesheet");
link.setAttribute("type", "text/css");
link.setAttribute("media", "screen, projection");
for (var i = 0; i < css.length; i++) {
var tag = link.cloneNode(true);
tag.setAttribute("href", dir + css[0]);
head.appendChild(tag);
}
}
}
}
}
Here, we’re testing the results of isSaf() and isOp(), one after the other. For each function that returns true, then the name of a new stylesheet is added to the oh-so-cleverly named css array. Then, for each entry in css, we create a new link element, point it at our patch file, and insert it into the head of our template.
Fire it up using your favorite onload or DOMContentLoaded function, and you’re good to go.
Scripteat Emptor
At this point, some of the audience’s more conscientious ‘scripters may be preparing to lob figgy pudding at this author’s head. And that’s perfectly understandable; relying on JavaScript to patch CSS chafes a bit against the normally clean separation we have between our pages’ content, presentation, and behavior layers.
And beyond the philosophical concerns, this approach comes with a few technical caveats attached:
Browser detection? So un-133t.
Browser detection is not something I’d typically recommend. Whenever possible, a proper DOM script should check for the support of a given object or method, rather than the device with which your users view your content.
It’s JavaScript, so don’t count on it being available.
According to one site, roughly four percent of Internet users don’t have JavaScript enabled. Your site’s stats might be higher or lower than this number, but still: don’t expect that every member of your audience will see these additional stylesheets, and ensure that your content’s still accessible with JS turned off.
Be a constant gardener.
The sample isSaf() and isOp() functions I’ve written will tell you if the user’s browser is Safari or Opera. As a result, stylesheets written to patch issues in an old browser may break when later releases repair the relevant CSS bugs.
You can, of course, add logic to these simple little scripts to serve up version-specific stylesheets, but that way madness may lie. In any event, test your work vigorously, and keep testing it when new versions of the targeted browsers come out. Make sure that a patch written today doesn’t become a bug tomorrow.
Patching Firefox, Opera, and Safari isn’t something I’ve had to do frequently: still, there have been occasions where the above script’s come in handy. Between conditional comments, careful CSS auditing, and some judicious JavaScript, browser-based bugs can be handled with near-surgical precision.
So pass the ‘nog. It’s patchin’ time. |
2007 |
Ethan Marcotte |
ethanmarcotte |
2007-12-15T00:00:00+00:00 |
https://24ways.org/2007/conditional-love/ |
code |
| 8 |
Coding Towards Accessibility |
“Can we make it AAA-compliant?” – does this question strike fear into your heart? Maybe for no other reason than because you will soon have to wade through the impenetrable WCAG documentation once again, to find out exactly what AAA-compliant means?
I’m not here to talk about that.
The Web Content Accessibility Guidelines are a comprehensive and peer-reviewed resource which we’re lucky to have at our fingertips. But they are also a pig to read, and they may have contributed to the sense of mystery and dread with which some developers associate the word accessibility.
This Christmas, I want to share with you some thoughts and some practical tips for building accessible interfaces which you can start using today, without having to do a ton of reading or changing your tools and workflow.
But first, let’s clear up a couple of misconceptions.
Dreary, flat experiences
I recently built a front-end framework for the Post Office. This was a great gig for a developer, but when I found out about my client’s stringent accessibility requirements I was concerned that I’d have to scale back what was quite a complex set of visual designs.
Sites like Jakob Neilsen’s old workhorse useit.com and even the pioneering GOV.UK may have to shoulder some of the blame for this. They put a premium on usability and accessibility over visual flourish. (Although, in fairness to Mr Neilsen, his new site nngroup.com is really quite a snazzy affair, comparatively.)
Of course, there are other reasons for these sites’ aesthetics — and it’s not because of the limitations of the form. You can make an accessible site look as glossy or as plain as you want it to look. It’s always our own ingenuity and attention to detail that are going to be the limiting factors.
Synecdoche
We must always guard against the tendency to assume that catering to screen readers means we have the whole accessibility ballgame covered.
There’s so much more to accessibility than assistive technology, as you know. And within the field of assistive technology there are plenty of other devices for us to consider.
Planning to accommodate all these users and devices can be daunting. When I first started working in this field I thought that the breadth of technology was prohibitive. I didn’t even know what a screen reader looked like. (I assumed they were big and heavy, perhaps like an old typewriter, and certainly they would be expensive and difficult to fathom.) This is nonsense, of course. Screen reader emulators are readily available as browser extensions and can be activated in seconds. Chromevox and Fangs are both excellent and you should download one or the other right now.
But the really good news is that you can emulate many other types of assistive technology without downloading a byte. And this is where we move from misconceptions into some (hopefully) useful advice.
The mouse trap
The simplest and most effective way to improve your abilities as a developer of accessible interfaces is to unplug your mouse.
Keyboard operation has its own WCAG chapter, because most users of assistive technology are navigating the web using only their keyboards. You can go some way towards putting yourself into their shoes so easily — just by ditching a peripheral.
Learning this was a lightbulb moment for me. When I build interfaces I am constantly flicking between code and the browser, testing or viewing the changes I have made. Now, instead of checking a new element once, I check it twice: once with my mouse and then again without.
Don’t just :hover
The reality is that when you first start doing this you can find your site becomes unusable straightaway. It’s easy to lose track of which element is in focus as you hit the tab key repeatedly.
One of the easiest changes you can make to your coding practice is to add :focus and :active pseudo-classes to every hover state that you write. I’m still amazed at how many sites fail to provide a decent focus state for links (and despite previous 24 ways authors in 2007 and 2009 writing on this same issue!).
You may find that in some cases it makes sense to have something other than, or in addition to, the hover state on focus, but start with the hover state that your designer has taken the time to provide you with. It’s a tiny change and there is no downside. So instead of this:
.my-cool-link:hover {
background-color: MistyRose ;
}
…try writing this:
.my-cool-link:hover,
.my-cool-link:focus,
.my-cool-link:active {
background-color: MistyRose ;
}
I’ve toyed with the idea of making a Sass mixin to take care of this for me, but I haven’t yet. I worry that people reading my code won’t see that I’m explicitly defining my focus and active states so I take the hit and write my hover rules out longhand.
JavaScript can play, too
This was another revelation for me. Keyboard-only navigation doesn’t necessitate a JavaScript-free experience, and up-to-date screen readers can execute JavaScript. So we’re able to create complex JavaScript-driven interfaces which all users can interact with.
Some of the hard work has already been done for us. First, there are already conventions around keyboard-driven interfaces. Think about the last time you viewed a photo album on Facebook. You can use the arrow keys to switch between photos, and the escape key closes whichever lightbox-y UI thing Facebook is showing its photos in this week. Arrow keys (up/down as well as left/right) for progression through content; Escape to back out of something; Enter or space bar to indicate a positive intention — these are established keyboard conventions which we can apply to our interfaces to improve their accessiblity.
Of course, by doing so we are improving our interfaces in general, giving all users the option to switch between keyboard and mouse actions as and when it suits them.
Second, this guy wants to help you out. Hans Hillen is a developer who has done a great deal of work around accessibility and JavaScript-powered interfaces. Along with The Paciello Group he has created a version of the jQuery UI library which has been fully optimised for keyboard navigation and screen reader use. It’s a fantastic reference which I revisit all the time
I’m not a huge fan of the jQuery UI library. It’s a pain to style and the code is a bit bloated. So I’ve not used this demo as a code resource to copy wholesale. I use it by playing with the various components and seeing how they react to keyboard controls. Each component is also fully marked up with the relevant ARIA roles to improve screen reader announcement where possible (more on this below).
Coding for accessibility promotes good habits
This is a another observation around accessibility and JavaScript. I noticed an improvement in the structure and abstraction of my code when I started adding keyboard controls to my interface elements.
Your code has to become more modular and event-driven, because any number of events could trigger the same interaction. A mouse-click, the Enter key and the space bar could all conceivably trigger the same open function on a collapsed accordion element. (And you want to keep things DRY, don’t you?)
If you aren’t already in the habit of separating out your interface functionality into discrete functions, you will be soon.
var doSomethingCool = function(){
// Do something cool here.
}
// Bind function to a button click - pretty vanilla
$('.myCoolButton').on('click', function(){
doSomethingCool();
return false;
});
// Bind the same function to a range of keypresses
$(document).keyup(function(e){
switch(e.keyCode) {
case 13: // enter
case 32: // spacebar
doSomethingCool();
break;
case 27: // escape
doSomethingElse();
break;
}
});
To be honest, if you’re doing complex UI stuff with JavaScript these days, or if you’ve been building any responsive interfaces which rely on JavaScript, then you are most likely working with an application framework such as Backbone, Angular or Ember, so an abstraced and event-driven application structure will be familar to you. It should be super easy for you to start helping out your keyboard-only users if you aren’t already — just add a few more event bindings into your UI layer!
Manipulating the tab order
So, you’ve adjusted your mindset and now you test every change to your codebase using a keyboard as well as a mouse. You’ve applied all your hover states to :focus and :active so you can see where you’re tabbing on the page, and your interactive components react seamlessly to a mixture of mouse and keyboard commands. Feels good, right?
There’s another level of optimisation to consider: manipulating the tab order. Certain DOM elements are naturally part of the tab order, and others are excluded. Links and input elements are the main elements included in the tab order, and static elements like paragraphs and headings are excluded. What if you want to make a static element ‘tabbable’?
A good example would be in an expandable accordion component. Each section of the accordion should be separated by a heading, and there’s no reason to make that heading into a link simply because it’s interactive.
<div class="accordion-widget">
<h3>Tyrannosaurus</h3>
<p>Tyrannosaurus; meaning "tyrant lizard"...<p>
<h3>Utahraptor</h3>
<p>Utahraptor is a genus of theropod dinosaurs...<p>
<h3>Dromiceiomimus</h3>
<p>Ornithomimus is a genus of ornithomimid dinosaurs...<p>
</div>
Adding the heading elements to the tab order is trivial. We just set their tabindex attribute to zero. You could do this on the server or the client. I prefer to do it with JavaScript as part of the accordion setup and initialisation process.
$('.accordion-widget h3').attr('tabindex', '0');
You can apply this trick in reverse and take elements out of the tab order by setting their tabindex attribute to −1, or change the tab order completely by using other integers. This should be done with great care, if at all. You have to be sure that the markup you remove from the tab order comes out because it genuinely improves the keyboard interaction experience. This is hard to validate without user testing. The danger is that developers will try to sweep complicated parts of the UI under the carpet by taking them out of the tab order. This would be considered a dark pattern — at least on my team!
A farewell ARIA
This is where things can get complex, and I’m no expert on the ARIA specification: I feel like I’ve only dipped my toe into this aspect of coding for accessibility. But, as with WCAG, I’d like to demystify things a little bit to encourage you to look into this area further yourself.
ARIA roles are of most benefit to screen reader users, because they modify and augment screen reader announcements.
Let’s take our dinosaur accordion from the previous section. The markup is semantic, so a screen reader that can’t handle JavaScript will announce all the content within the accordion, no problem.
But modern screen readers can deal with JavaScript, and this means that all the lovely dino information beneath each heading has probably been hidden on document.ready, when the accordion initialised. It might have been hidden using display:none, which prevents a screen reader from announcing content. If that’s as far as you have gone, then you’ve committed an accessibility sin by hiding content from screen readers. Your user will hear a set of headings being announced, with no content in between. It would sound something like this if you were using Chromevox:
> Tyrannosaurus. Heading Three.
> Utahraptor. Heading Three.
> Dromiceiomimus. Heading Three.
We can add some ARIA magic to the markup to improve this, using the tablist role. Start by adding a role of tablist to the widget, and roles of tab and tabpanel to the headings and paragraphs respectively. Set boolean values for aria-selected, aria-hidden and aria-expanded. The markup could end up looking something like this.
<div class="accordion-widget" role="tablist">
<!-- T-rex -->
<h3 role="tab"
tabindex="0"
id="tab-2"
aria-controls="panel-2"
aria-selected="false">Utahraptor</h3>
<p role="tabpanel"
id="panel-2"
aria-labelledby="tab-2"
aria-expanded="false"
aria-hidden="true">Utahraptor is a genus of theropod dinosaurs...</p>
<!-- Dromiceiomimus -->
</div>
Now, if a screen reader user encounters this markup they will hear the following:
> Tyrannosaurus. Tab not selected; one of three.
> Utahraptor. Tab not selected; two of three.
> Dromiceiomimus. Tab not selected; three of three.
You could add arrow key events to help the user browse up and down the tab list items until they find one they like.
Your accordion open() function should update the ARIA boolean values as well as adding whatever classes and animations you have built in as standard. Your users know that unselected tabs are meant to be interacted with, so if a user triggers the open function (say, by hitting Enter or the space bar on the second item) they will hear this:
> Utahraptor. Selected; two of three.
The paragraph element for the expanded item will not be hidden by your CSS, which means it will be announced as normal by the screen reader.
This kind of thing makes so much more sense when you have a working example to play with. Again, I refer you to the fantastic resource that Hans Hillen has put together: this is his take on an accessible accordion, on which much of my example is based.
Conclusion
Getting complex interfaces right for all of your users can be difficult — there’s no point pretending otherwise. And there’s no substitute for user testing with real users who navigate the web using assistive technology every day. This kind of testing can be time-consuming to recruit for and to conduct. On top of this, we now have accessibility on mobile devices to contend with. That’s a huge area in itself, and it’s one which I have not yet had a chance to research properly.
So, there’s lots to learn, and there’s lots to do to get it right. But don’t be disheartened. If you have read this far then I’ll leave you with one final piece of advice: don’t wait.
Don’t wait until you’re building a site which mandates AAA-compliance to try this stuff out. Don’t wait for a client with the will or the budget to conduct the full spectrum of user testing to come along. Unplug your mouse, and start playing with your interfaces in a new way. You’ll be surprised at the things that you learn and the issues you uncover.
And the next time an true accessibility project comes along, you will be way ahead of the game. |
2013 |
Charlie Perrins |
charlieperrins |
2013-12-03T00:00:00+00:00 |
https://24ways.org/2013/coding-towards-accessibility/ |
code |