| 8 |
Coding Towards Accessibility |
“Can we make it AAA-compliant?” – does this question strike fear into your heart? Maybe for no other reason than because you will soon have to wade through the impenetrable WCAG documentation once again, to find out exactly what AAA-compliant means?
I’m not here to talk about that.
The Web Content Accessibility Guidelines are a comprehensive and peer-reviewed resource which we’re lucky to have at our fingertips. But they are also a pig to read, and they may have contributed to the sense of mystery and dread with which some developers associate the word accessibility.
This Christmas, I want to share with you some thoughts and some practical tips for building accessible interfaces which you can start using today, without having to do a ton of reading or changing your tools and workflow.
But first, let’s clear up a couple of misconceptions.
Dreary, flat experiences
I recently built a front-end framework for the Post Office. This was a great gig for a developer, but when I found out about my client’s stringent accessibility requirements I was concerned that I’d have to scale back what was quite a complex set of visual designs.
Sites like Jakob Neilsen’s old workhorse useit.com and even the pioneering GOV.UK may have to shoulder some of the blame for this. They put a premium on usability and accessibility over visual flourish. (Although, in fairness to Mr Neilsen, his new site nngroup.com is really quite a snazzy affair, comparatively.)
Of course, there are other reasons for these sites’ aesthetics — and it’s not because of the limitations of the form. You can make an accessible site look as glossy or as plain as you want it to look. It’s always our own ingenuity and attention to detail that are going to be the limiting factors.
Synecdoche
We must always guard against the tendency to assume that catering to screen readers means we have the whole accessibility ballgame covered.
There’s so much more to accessibility than assistive technology, as you know. And within the field of assistive technology there are plenty of other devices for us to consider.
Planning to accommodate all these users and devices can be daunting. When I first started working in this field I thought that the breadth of technology was prohibitive. I didn’t even know what a screen reader looked like. (I assumed they were big and heavy, perhaps like an old typewriter, and certainly they would be expensive and difficult to fathom.) This is nonsense, of course. Screen reader emulators are readily available as browser extensions and can be activated in seconds. Chromevox and Fangs are both excellent and you should download one or the other right now.
But the really good news is that you can emulate many other types of assistive technology without downloading a byte. And this is where we move from misconceptions into some (hopefully) useful advice.
The mouse trap
The simplest and most effective way to improve your abilities as a developer of accessible interfaces is to unplug your mouse.
Keyboard operation has its own WCAG chapter, because most users of assistive technology are navigating the web using only their keyboards. You can go some way towards putting yourself into their shoes so easily — just by ditching a peripheral.
Learning this was a lightbulb moment for me. When I build interfaces I am constantly flicking between code and the browser, testing or viewing the changes I have made. Now, instead of checking a new element once, I check it twice: once with my mouse and then again without.
Don’t just :hover
The reality is that when you first start doing this you can find your site becomes unusable straightaway. It’s easy to lose track of which element is in focus as you hit the tab key repeatedly.
One of the easiest changes you can make to your coding practice is to add :focus and :active pseudo-classes to every hover state that you write. I’m still amazed at how many sites fail to provide a decent focus state for links (and despite previous 24 ways authors in 2007 and 2009 writing on this same issue!).
You may find that in some cases it makes sense to have something other than, or in addition to, the hover state on focus, but start with the hover state that your designer has taken the time to provide you with. It’s a tiny change and there is no downside. So instead of this:
.my-cool-link:hover {
background-color: MistyRose ;
}
…try writing this:
.my-cool-link:hover,
.my-cool-link:focus,
.my-cool-link:active {
background-color: MistyRose ;
}
I’ve toyed with the idea of making a Sass mixin to take care of this for me, but I haven’t yet. I worry that people reading my code won’t see that I’m explicitly defining my focus and active states so I take the hit and write my hover rules out longhand.
JavaScript can play, too
This was another revelation for me. Keyboard-only navigation doesn’t necessitate a JavaScript-free experience, and up-to-date screen readers can execute JavaScript. So we’re able to create complex JavaScript-driven interfaces which all users can interact with.
Some of the hard work has already been done for us. First, there are already conventions around keyboard-driven interfaces. Think about the last time you viewed a photo album on Facebook. You can use the arrow keys to switch between photos, and the escape key closes whichever lightbox-y UI thing Facebook is showing its photos in this week. Arrow keys (up/down as well as left/right) for progression through content; Escape to back out of something; Enter or space bar to indicate a positive intention — these are established keyboard conventions which we can apply to our interfaces to improve their accessiblity.
Of course, by doing so we are improving our interfaces in general, giving all users the option to switch between keyboard and mouse actions as and when it suits them.
Second, this guy wants to help you out. Hans Hillen is a developer who has done a great deal of work around accessibility and JavaScript-powered interfaces. Along with The Paciello Group he has created a version of the jQuery UI library which has been fully optimised for keyboard navigation and screen reader use. It’s a fantastic reference which I revisit all the time
I’m not a huge fan of the jQuery UI library. It’s a pain to style and the code is a bit bloated. So I’ve not used this demo as a code resource to copy wholesale. I use it by playing with the various components and seeing how they react to keyboard controls. Each component is also fully marked up with the relevant ARIA roles to improve screen reader announcement where possible (more on this below).
Coding for accessibility promotes good habits
This is a another observation around accessibility and JavaScript. I noticed an improvement in the structure and abstraction of my code when I started adding keyboard controls to my interface elements.
Your code has to become more modular and event-driven, because any number of events could trigger the same interaction. A mouse-click, the Enter key and the space bar could all conceivably trigger the same open function on a collapsed accordion element. (And you want to keep things DRY, don’t you?)
If you aren’t already in the habit of separating out your interface functionality into discrete functions, you will be soon.
var doSomethingCool = function(){
// Do something cool here.
}
// Bind function to a button click - pretty vanilla
$('.myCoolButton').on('click', function(){
doSomethingCool();
return false;
});
// Bind the same function to a range of keypresses
$(document).keyup(function(e){
switch(e.keyCode) {
case 13: // enter
case 32: // spacebar
doSomethingCool();
break;
case 27: // escape
doSomethingElse();
break;
}
});
To be honest, if you’re doing complex UI stuff with JavaScript these days, or if you’ve been building any responsive interfaces which rely on JavaScript, then you are most likely working with an application framework such as Backbone, Angular or Ember, so an abstraced and event-driven application structure will be familar to you. It should be super easy for you to start helping out your keyboard-only users if you aren’t already — just add a few more event bindings into your UI layer!
Manipulating the tab order
So, you’ve adjusted your mindset and now you test every change to your codebase using a keyboard as well as a mouse. You’ve applied all your hover states to :focus and :active so you can see where you’re tabbing on the page, and your interactive components react seamlessly to a mixture of mouse and keyboard commands. Feels good, right?
There’s another level of optimisation to consider: manipulating the tab order. Certain DOM elements are naturally part of the tab order, and others are excluded. Links and input elements are the main elements included in the tab order, and static elements like paragraphs and headings are excluded. What if you want to make a static element ‘tabbable’?
A good example would be in an expandable accordion component. Each section of the accordion should be separated by a heading, and there’s no reason to make that heading into a link simply because it’s interactive.
<div class="accordion-widget">
<h3>Tyrannosaurus</h3>
<p>Tyrannosaurus; meaning "tyrant lizard"...<p>
<h3>Utahraptor</h3>
<p>Utahraptor is a genus of theropod dinosaurs...<p>
<h3>Dromiceiomimus</h3>
<p>Ornithomimus is a genus of ornithomimid dinosaurs...<p>
</div>
Adding the heading elements to the tab order is trivial. We just set their tabindex attribute to zero. You could do this on the server or the client. I prefer to do it with JavaScript as part of the accordion setup and initialisation process.
$('.accordion-widget h3').attr('tabindex', '0');
You can apply this trick in reverse and take elements out of the tab order by setting their tabindex attribute to −1, or change the tab order completely by using other integers. This should be done with great care, if at all. You have to be sure that the markup you remove from the tab order comes out because it genuinely improves the keyboard interaction experience. This is hard to validate without user testing. The danger is that developers will try to sweep complicated parts of the UI under the carpet by taking them out of the tab order. This would be considered a dark pattern — at least on my team!
A farewell ARIA
This is where things can get complex, and I’m no expert on the ARIA specification: I feel like I’ve only dipped my toe into this aspect of coding for accessibility. But, as with WCAG, I’d like to demystify things a little bit to encourage you to look into this area further yourself.
ARIA roles are of most benefit to screen reader users, because they modify and augment screen reader announcements.
Let’s take our dinosaur accordion from the previous section. The markup is semantic, so a screen reader that can’t handle JavaScript will announce all the content within the accordion, no problem.
But modern screen readers can deal with JavaScript, and this means that all the lovely dino information beneath each heading has probably been hidden on document.ready, when the accordion initialised. It might have been hidden using display:none, which prevents a screen reader from announcing content. If that’s as far as you have gone, then you’ve committed an accessibility sin by hiding content from screen readers. Your user will hear a set of headings being announced, with no content in between. It would sound something like this if you were using Chromevox:
> Tyrannosaurus. Heading Three.
> Utahraptor. Heading Three.
> Dromiceiomimus. Heading Three.
We can add some ARIA magic to the markup to improve this, using the tablist role. Start by adding a role of tablist to the widget, and roles of tab and tabpanel to the headings and paragraphs respectively. Set boolean values for aria-selected, aria-hidden and aria-expanded. The markup could end up looking something like this.
<div class="accordion-widget" role="tablist">
<!-- T-rex -->
<h3 role="tab"
tabindex="0"
id="tab-2"
aria-controls="panel-2"
aria-selected="false">Utahraptor</h3>
<p role="tabpanel"
id="panel-2"
aria-labelledby="tab-2"
aria-expanded="false"
aria-hidden="true">Utahraptor is a genus of theropod dinosaurs...</p>
<!-- Dromiceiomimus -->
</div>
Now, if a screen reader user encounters this markup they will hear the following:
> Tyrannosaurus. Tab not selected; one of three.
> Utahraptor. Tab not selected; two of three.
> Dromiceiomimus. Tab not selected; three of three.
You could add arrow key events to help the user browse up and down the tab list items until they find one they like.
Your accordion open() function should update the ARIA boolean values as well as adding whatever classes and animations you have built in as standard. Your users know that unselected tabs are meant to be interacted with, so if a user triggers the open function (say, by hitting Enter or the space bar on the second item) they will hear this:
> Utahraptor. Selected; two of three.
The paragraph element for the expanded item will not be hidden by your CSS, which means it will be announced as normal by the screen reader.
This kind of thing makes so much more sense when you have a working example to play with. Again, I refer you to the fantastic resource that Hans Hillen has put together: this is his take on an accessible accordion, on which much of my example is based.
Conclusion
Getting complex interfaces right for all of your users can be difficult — there’s no point pretending otherwise. And there’s no substitute for user testing with real users who navigate the web using assistive technology every day. This kind of testing can be time-consuming to recruit for and to conduct. On top of this, we now have accessibility on mobile devices to contend with. That’s a huge area in itself, and it’s one which I have not yet had a chance to research properly.
So, there’s lots to learn, and there’s lots to do to get it right. But don’t be disheartened. If you have read this far then I’ll leave you with one final piece of advice: don’t wait.
Don’t wait until you’re building a site which mandates AAA-compliance to try this stuff out. Don’t wait for a client with the will or the budget to conduct the full spectrum of user testing to come along. Unplug your mouse, and start playing with your interfaces in a new way. You’ll be surprised at the things that you learn and the issues you uncover.
And the next time an true accessibility project comes along, you will be way ahead of the game. |
2013 |
Charlie Perrins |
charlieperrins |
2013-12-03T00:00:00+00:00 |
https://24ways.org/2013/coding-towards-accessibility/ |
code |
| 11 |
JavaScript: Taking Off the Training Wheels |
JavaScript is the third pillar of front-end web development. Of those pillars, it is both the most powerful and the most complex, so it’s understandable that when 24 ways asked, “What one thing do you wish you had more time to learn about?”, a number of you answered “JavaScript!”
This article aims to help you feel happy writing JavaScript, and maybe even without libraries like jQuery. I can’t comprehensively explain JavaScript itself without writing a book, but I hope this serves as a springboard from which you can jump to other great resources.
Why learn JavaScript?
So what’s in it for you? Why take the next step and learn the fundamentals?
Confidence with jQuery
If nothing else, learning JavaScript will improve your jQuery code; you’ll be comfortable writing jQuery from scratch and feel happy bending others’ code to your own purposes. Writing efficient, fast and bug-free jQuery is also made much easier when you have a good appreciation of JavaScript, because you can look at what jQuery is really doing. Understanding how JavaScript works lets you write better jQuery because you know what it’s doing behind the scenes. When you need to leave the beaten track, you can do so with confidence.
In fact, you could say that jQuery’s ultimate goal is not to exist: it was invented at a time when web APIs were very inconsistent and hard to work with. That’s slowly changing as new APIs are introduced, and hopefully there will come a time when jQuery isn’t needed.
An example of one such change is the introduction of the very useful document.querySelectorAll. Like jQuery, it converts a CSS selector into a list of matching elements. Here’s a comparison of some jQuery code and the equivalent without.
$('.counter').each(function (index) {
$(this).text(index + 1);
});
var counters = document.querySelectorAll('.counter');
[].slice.call(counters).forEach(function (elem, index) {
elem.textContent = index + 1;
});
Solving problems no one else has!
When you have to go to the internet to solve a problem, you’re forever stuck reusing code other people wrote to solve a slightly different problem to your own. Learning JavaScript will allow you to solve problems in your own way, and begin to do things nobody else ever has.
Node.js
Node.js is a non-browser environment for running JavaScript, and it can do just about anything! But if that sounds daunting, don’t worry: the Node community is thriving, very friendly and willing to help.
I think Node is incredibly exciting. It enables you, with one language, to build complete websites with complex and feature-filled front- and back-ends. Projects that let users log in or need a database are within your grasp, and Node has a great ecosystem of library authors to help you build incredible things. Exciting!
Here’s an example web server written with Node. http is a module that allows you to create servers and, like jQuery’s $.ajax, make requests. It’s a small amount of code to do something complex and, while working with Node is different from writing front-end code, it’s certainly not out of your reach.
var http = require('http');
http.createServer(function (req, res) {
res.writeHead(200, {'Content-Type': 'text/plain'});
res.end('Hello World');
}).listen(1337);
console.log('Server running at http://localhost:1337/');
Grunt and other website tools
Node has brought in something of a renaissance in tools that run in the command line, like Yeoman and Grunt. Both of these rely heavily on Node, and I’ll talk a little bit about Grunt here.
Grunt is a task runner, and many people use it for compiling Sass or compressing their site’s JavaScript and images. It’s pretty cool. You configure Grunt via the gruntfile.js, so JavaScript skills will come in handy, and since Grunt supports plug-ins built with JavaScript, knowing it unlocks the bucketloads of power Grunt has to offer.
Ways to improve your skills
So you know you want to learn JavaScript, but what are some good ways to learn and improve? I think the answer to that is different for different people, but here are some ideas.
Rebuild a jQuery app
Converting a jQuery project to non-jQuery code is a great way to explore how you modify elements on the page and make requests to the server for data. My advice is to focus on making it work in one modern browser initially, and then go cross-browser if you’re feeling adventurous. There are many resources for directly comparing jQuery and non-jQuery code, like Jeffrey Way’s jQuery to JavaScript article.
Find a mentor
If you think you’d work better on a one-to-one basis then finding yourself a mentor could be a brilliant way to learn. The JavaScript community is very friendly and many people will be more than happy to give you their time. I’d look out for someone who’s active and friendly on Twitter, and does the kind of work you’d like to do. Introduce yourself over Twitter or send them an email. I wouldn’t expect a full tutoring course (although that is another option!) but they’ll be very glad to answer a question and any follow-ups every now and then.
Go to a workshop
Many conferences and local meet-ups run workshops, hosted by experts in a particular field. See if there’s one in your area. Workshops are great because you can ask direct questions, and you’re in an environment where others are learning just like you are — no need to learn alone!
Set yourself challenges
This is one way I like to learn new things. I have a new thing that I’m not very good at, so I pick something that I think is just out of my reach and I try to build it. It’s learning by doing and, even if you fail, it can be enormously valuable.
Where to start?
If you’ve decided learning JavaScript is an important step for you, your next question may well be where to go from here.
I’ve collected some links to resources I know of or use, with some discussion about why you might want to check a particular site out. I hope this serves as a springboard for you to go out and learn as much as you want.
Beginner
If you’re just getting started with JavaScript, I’d recommend heading to one of these places. They cover the basics and, in some cases, a little more advanced stuff. They’re all reputable sources (although, I’ve included something I wrote — you can decide about that one!) and will not lead you astray.
jQuery’s JavaScript 101 is a great first resource for JavaScript that will give you everything you need to work with jQuery like a pro.
Codecademy’s JavaScript Track is a small but useful JavaScript course. If you like learning interactively, this could be one for you.
HTMLDog’s JavaScript Tutorials take you right through from the basics of code to a brief introduction to newer technology like Node and Angular. [Disclaimer: I wrote this stuff, so it comes with a hazard warning!]
The tuts+ jQuery to JavaScript mentioned earlier is great for seeing how jQuery code looks when converted to pure JavaScript.
Getting in-depth
For more comprehensive documentation and help I’d recommend adding these places to your list of go-tos.
MDN: the Mozilla Developer Network is the first place I go for many JavaScript questions. I mostly find myself there via a search, but it’s a great place to just go and browse.
Axel Rauschmayer’s 2ality is a stunning collection of articles that will take you deep into JavaScript. It’s certainly worth looking at.
Addy Osmani’s JavaScript Design Patterns is a comprehensive collection of patterns for writing high quality JavaScript, particularly as you (I hope) start to write bigger and more complex applications.
And finally…
I think the key to learning anything is curiosity and perseverance. If you have a question, go out and search for the answer, even if you have no idea where to start. Keep going and going and eventually you’ll get there. I bet you’ll learn a whole lot along the way. Good luck!
Many thanks to the people who gave me their time when I was working on this article: Tom Oakley, Jack Franklin, Ben Howdle and Laura Kalbag. |
2013 |
Tom Ashworth |
tomashworth |
2013-12-05T00:00:00+00:00 |
https://24ways.org/2013/javascript-taking-off-the-training-wheels/ |
code |
| 15 |
Git for Grown-ups |
You are a clever and talented person. You create beautiful designs, or perhaps you have architected a system that even my cat could use. Your peers adore you. Your clients love you. But, until now, you haven’t *&^#^! been able to make Git work. It makes you angry inside that you have to ask your co-worker, again, for that *&^#^! command to upload your work.
It’s not you. It’s Git. Promise.
Yes, this is an article about the popular version control system, Git. But unlike just about every other article written about Git, I’m not going to give you the top five commands that you need to memorize; and I’m not going to tell you all your problems would be solved if only you were using this GUI wrapper or that particular workflow. You see, I’ve come to a grand realization: when we teach Git, we’re doing it wrong.
Let me back up for a second and tell you a little bit about the field of adult education. (Bear with me, it gets good and will leave you feeling both empowered and righteous.) Andragogy, unlike pedagogy, is a learner-driven educational experience. There are six main tenets to adult education:
Adults prefer to know why they are learning something.
The foundation of the learning activities should include experience.
Adults prefer to be able to plan and evaluate their own instruction.
Adults are more interested in learning things which directly impact their daily activities.
Adults prefer learning to be oriented not towards content, but towards problems.
Adults relate more to their own motivators than to external ones.
Nowhere in this list does it include “memorize the five most popular Git commands”. And yet this is how we teach version control: init, add, commit, branch, push. You’re an expert! Sound familiar? In the hierarchy of learning, memorizing commands is the lowest, or most basic, form of learning. At the peak of learning you are able to not just analyze and evaluate a problem space, but create your own understanding in relation to your existing body of knowledge.
“Fine,” I can hear you saying to yourself. “But I’m here to learn about version control.” Right you are! So how can we use this knowledge to master Git? First of all: I give you permission to use Git as a tool. A tool which you control and which you assign tasks to. A tool like a hammer, or a saw. Yes, your mastery of your tools will shape the kinds of interactions you have with your work, and your peers. But it’s yours to control. Git was written by kernel developers for kernel development. The web world has adopted Git, but it is not a tool designed for us and by us. It’s no Sass, y’know? Git wasn’t developed out of our frustration with managing CSS files in an increasingly complex ecosystem of components and atomic design. So, as you work through the next part of this article, give yourself a bit of a break. We’re in this together, and it’s going to be OK.
We’re going to do a little activity. We’re going to create your perfect Git cheatsheet.
I want you to start by writing down a list of all the people on your code team. This list may include:
developers
designers
project managers
clients
Next, I want you to write down a list of all the ways you interact with your team. Maybe you’re a solo developer and you do all the tasks. Maybe you only do a few things. But I want you to write down a list of all the tasks you’re actually responsible for. For example, my list looks like this:
writing code
reviewing code
publishing tested code to your server(s)
troubleshooting broken code
The next list will end up being a series of boxes in a diagram. But to start, I want you to write down a list of your tools and constraints. This list potentially has a lot of noun-like items and verb-like items:
code hosting system (Bitbucket? GitHub? Unfuddle? self-hosted?)
server ecosystem (dev/staging/live)
automated testing systems or review gates
automated build systems (that Jenkins dude people keep referring to)
Brilliant! Now you’ve got your actors and your actions, it’s time to shuffle them into a diagram. There are many popular workflow patterns. None are inherently right or wrong; rather, some are more or less appropriate for what you are trying to accomplish.
Centralized workflow
Everyone saves to a single place. This workflow may mean no version control, or a very rudimentary version control system which only ever has a single copy of the work available to the team at any point in time.
Branching workflow
Everyone works from a copy of the same place, merging their changes into the main copy as their work is completed. Think of the branches as a motorcycle sidecar: they’re along for the ride and probably cannot exist in isolation of the main project for long without serious danger coming to the either the driver or sidecar passenger. Branches are a fundamental concept in version control — they allow you to work on new features, bug fixes, and experimental changes within a single repository, but without forcing the changes onto others working from the same branch.
Forking workflow
Everyone works from their own, independent repository. A fork is an exact duplicate of a repository that a developer can make their own changes to. It can be kept up to date with additional changes made in other repositories, but it cannot force its changes onto another’s repository. A fork is a complete repository which can use its own workflow strategies. If developers wish to merge their work with the main project, they must make a request of some kind (submit a patch, or a pull request) which the project collaborators may choose to adopt or reject. This workflow is popular for open source projects as it enforces a review process.
Gitflow workflow
A specific workflow convention which includes five streams of parallel coding efforts: master, development, feature branches, release branches, and hot fixes. This workflow is often simplified down to a few elements by web teams, but may be used wholesale by software product teams. The original article describing this workflow was written by Vincent Driessen back in January 2010.
But these workflows aren’t about you yet, are they? So let’s make the connections.
From the list of people on your team you identified earlier, draw a little circle. Give each of these circles some eyes and a smile. Now I want you to draw arrows between each of these people in the direction that code (ideally) flows. Does your designer create responsive prototypes which are pushed to the developer? Draw an arrow to represent this.
Chances are high that you don’t just have people on your team, but you also have some kind of infrastructure. Hopefully you wrote about it earlier. For each of the servers and code repositories in your infrastructure, draw a square. Now, add to your diagram the relationships between the people and each of the machines in the infrastructure. Who can deploy code to the live server? How does it really get there? I bet it goes through some kind of code hosting system, such as GitHub. Draw in those arrows.
But wait!
The code that’s on your development machine isn’t the same as the live code. This is where we introduce the concept of a branch in version control. In Git, a repository contains all of the code (sort of). A branch is a fragment of the code that has been worked on in isolation to the other branches within a repository. Often branches will have elements in common. When we compare two (or more) branches, we are asking about the difference (or diff) between these two slivers. Often the master branch is used on production, and the development branch is used on our dev server. The difference between these two branches is the untested code that is not yet deployed.
On your diagram, see if you can colour-code according to the branch names at each of the locations within your infrastructure. You might find it useful to make a few different copies of the diagram to isolate each of the tasks you need to perform. For example: our team has a peer review process that each branch must go through before it is merged into the shared development branch.
Finally, we are ready to add the Git commands necessary to make sense of the arrows in our diagram. If we are bringing code to our own workstation we will issue one of the following commands: clone (the first time we bring code to our workstation) or pull. Remembering that a repository contains all branches, we will issue the command checkout to switch from one branch to another within our own workstation. If we want to share a particular branch with one of our team mates, we will push this branch back to the place we retrieved it from (the origin). Along each of the arrows in your diagram, write the name of the command you are are going to use when you perform that particular task.
From here, it’s up to you to be selfish. Before asking Git what command it would like you to use, sketch the diagram of what you want. Git is your tool, you are not Git’s tool. Draw the diagram. Communicate your tasks with your team as explicitly as you can. Insist on being a selfish adult learner — demand that others explain to you, in ways that are relevant to you, how to do the things you need to do today. |
2013 |
Emma Jane Westby |
emmajanewestby |
2013-12-04T00:00:00+00:00 |
https://24ways.org/2013/git-for-grownups/ |
code |
| 16 |
URL Rewriting for the Fearful |
I think it was Marilyn Monroe who said, “If you can’t handle me at my worst, please just fix these rewrite rules, I’m getting an internal server error.” Even the blonde bombshell hated configuring URL rewrites on her website, and I think most of us know where she was coming from.
The majority of website projects I work on require some amount of URL rewriting, and I find it mildly enjoyable — I quite like a good rewrite rule. I suspect you may not share my glee, so in this article we’re going to go back to basics to try to make the whole rigmarole more understandable.
When we think about URL rewriting, usually that means adding some rules to an .htaccess file for an Apache web server. As that’s the most common case, that’s what I’ll be sticking to here. If you work with a different server, there’s often documentation specifically for translating from Apache’s mod_rewrite rules. I even found an automatic converter for nginx.
This isn’t going to be a comprehensive guide to every URL rewriting problem you might ever have. That would take us until Christmas. If you consider yourself a trial-and-error dabbler in the HTTP 500-infested waters of URL rewriting, then hopefully this will provide a little bit more of a basis to help you figure out what you’re doing. If you’ve ever found yourself staring at the white screen of death after screwing up your .htaccess file, don’t worry. As Michael Jackson once insipidly whined, you are not alone.
The basics
Rewrite rules form part of the Apache web server’s configuration for a website, and can be placed in a number of different locations as part of your virtual host configuration. By far the simplest and most portable option is to use an .htaccess file in your website root. Provided your server has mod_rewrite available, all you need to do to kick things off in your .htaccess file is:
RewriteEngine on
The general formula for a rewrite rule is:
RewriteRule URL/to/match URL/to/use/if/it/matches [options]
When we talk about URL rewriting, we’re normally talking about one of two things: redirecting the browser to a different URL; or rewriting the URL internally to use a particular file. We’ll look at those in turn.
Redirects
Redirects match an incoming URL, and then redirect the user’s browser to a different address. These can be useful for maintaining legacy URLs if content changes location as part of a site redesign. Redirecting the old URL to the new location makes sure that any incoming links, such as those from search engines, continue to work.
In 1998, Sir Tim Berners-Lee wrote that Cool URIs don’t change, encouraging us all to go the extra mile to make sure links keep working forever. I think that sometimes it’s fine to move things around — especially to correct bad URL design choices of the past — provided that you can do so while keeping those old URLs working. That’s where redirects can help.
A redirect might look like this
RewriteRule ^article/used/to/be/here.php$ /article/now/lives/here/ [R=301,L]
Rewriting
By default, web servers closely map page URLs to the files in your site. On receiving a request for http://example.com/about/history.html the server goes to the configured folder for the example.com website, and then goes into the about folder and returns the history.html file.
A rewrite rule changes that process by breaking the direct relationship between the URL and the file system. “When there’s a request for /about/history.html” a rewrite rule might say, “use the file /about_section.php instead.”
This opens up lots of possibilities for creative ways to map URLs to the files that know how to serve up the page. Most MVC frameworks will have a single rule to rewrite all page URLs to one single file. That file will be a script which kicks off the framework to figure out what to do to serve the page.
RewriteRule ^for/this/url/$ /use/this/file.php [L]
Matching patterns
By now you’ll have noted the weird ^ and $ characters wrapped around the URL we’re trying to match. That’s because what we’re actually using here is a pattern. Technically, it is what’s called a Perl Compatible Regular Expression (PCRE) or simply a regex or regexp. We’ll call it a pattern because we’re not animals.
What are these patterns? If I asked you to enter your credit card expiry date as MM/YY then chances are you’d wonder what I wanted your credit card details for, but you’d know that I wanted a two-digit month, a slash, and a two-digit year. That’s not a regular expression, but it’s the same idea: using some placeholder characters to define the pattern of the input you’re trying to match.
We’ve already met two regexp characters.
^
Matches the beginning of a string
$
Matches the end of a string
When a pattern starts with ^ and ends with $ it’s to make sure we match the complete URL start to finish, not just part of it. There are lots of other ways to match, too:
[0-9]
Matches a number, 0–9. [2-4] would match numbers 2 to 4 inclusive.
[a-z]
Matches lowercase letters a–z
[A-Z]
Matches uppercase letters A–Z
[a-z0-9]
Combining some of these, this matches letters a–z and numbers 0–9
These are what we call character groups. The square brackets basically tell the server to match from the selection of characters within them. You can put any specific characters you’re looking for within the brackets, as well as the ranges shown above.
However, all these just match one single character. [0-9] would match 8 but not 84 — to match 84 we’d need to use [0-9] twice.
[0-9][0-9]
So, if we wanted to match 1984 we could to do this:
[0-9][0-9][0-9][0-9]
…but that’s getting silly. Instead, we can do this:
[0-9]{4}
That means any character between 0 and 9, four times. If we wanted to match a number, but didn’t know how long it might be (for example, a database ID in the URL) we could use the + symbol, which means one or more.
[0-9]+
This now matches 1, 123 and 1234567.
Putting it into practice
Let’s say we need to write a rule to match article URLs for this website, and to rewrite them to use /article.php under the hood. The articles all have URLs like this:
2013/article-title/
They start with a year (from 2005 up to 2013, currently), a slash, and then have a URL-safe version of the article title (a slug), ending in a slash. We’d match it like this:
^[0-9]{4}/[a-z0-9-]+/$
If that looks frightening, don’t worry. Breaking it down, from the start of the URL (^) we’re looking for four numbers ([0-9]{4}). Then a slash — that’s just literal — and then anything lowercase a–z or 0–9 or a dash ([a-z0-9-]) one or more times (+), ending in a slash (/$).
Putting that into a rewrite rule, we end up with this:
RewriteRule ^[0-9]{4}/[a-z0-9-]+/$ /article.php
We’re getting close now. We can match the article URLs and rewrite them to use article.php. Now we just need to make sure that article.php knows which article it’s supposed to display.
Capturing groups, and replacements
When rewriting URLs you’ll often want to take important parts of the URL you’re matching and pass them along to the script that handles the request. That’s usually done by adding those parts of the URL on as query string arguments. For our example, we want to make sure that article.php knows the year and the article title we’re looking for. That means we need to call it like this:
/article.php?year=2013&slug=article-title
To do this, we need to mark which parts of the pattern we want to reuse in the destination. We do this with round brackets or parentheses. By placing parentheses around parts of the pattern we want to reuse, we create what’s called a capturing group. To capture an important part of the source URL to use in the destination, surround it in parentheses.
Our pattern now looks like this, with parentheses around the parts that match the year and slug, but ignoring the slashes:
^([0-9]{4})/([a-z0-9-]+)/$
To use the capturing groups in the destination URL, we use the dollar sign and the number of the group we want to use. So, the first capturing group is $1, the second is $2 and so on. (The $ is unrelated to the end-of-pattern $ we used before.)
RewriteRule ^([0-9]{4})/([a-z0-9-]+)/$ /article.php?year=$1&slug=$2
The value of the year capturing group gets used as $1 and the article title slug is $2. Had there been a third group, that would be $3 and so on. In regexp parlance, these are called back-references as they refer back to the pattern.
Options
Several brain-taxing minutes ago, I mentioned some options as the final part of a rewrite rule. There are lots of options (or flags) you can set to change how the rule is processed. The most useful (to my mind) are:
R=301
Perform an HTTP 301 redirect to send the user’s browser to the new URL. A status of 301 means a resource has moved permanently and so it’s a good way of both redirecting the user to the new URL, and letting search engines know to update their indexes.
L
Last. If this rule matches, don’t bother processing the following rules.
Options are set in square brackets at the end of the rule. You can set multiple options by separating them with commas:
RewriteRule ^([0-9]{4})/([a-z0-9-]+)/$ /article.php?year=$1&slug=$2 [L]
or
RewriteRule ^about/([a-z0-9-]+).jsp/$ /about/$1/ [R=301,L]
Common pitfalls
Once you’ve built up a few rewrite rules, things can start to go wrong. You may have been there: a rule which looks perfectly good is somehow not matching. One common reason for this is hidden behind that [L] flag.
L for Last is a useful option to tell the rewrite engine to stop once the rule has been matched. This is what it does — the remaining rules in the .htaccess file are then ignored. However, once a URL has been rewritten, the entire set of rules are then run again on the new URL. If the new URL matches any of the rules, that too will be rewritten and on it goes.
One way to avoid this problem is to keep your ‘real’ pages under a folder path that will never match one of your rules, or that you can exclude from the rewrite rules.
Useful snippets
I find myself reusing the same few rules over and over again, just with minor changes. Here are some useful examples to refer back to.
Excluding a directory
As mentioned above, if you’re rewriting lots of fancy URLs to a collection of real files it can be helpful to put those files in a folder and exclude it from rewrite rules. This helps solve the issue of rewrite rules reapplying to your newly rewritten URL. To exclude a directory, put a rule like this at the top of your file, before your other rules. Our files are in a folder called _source, the dash in the rule means do nothing, and the L flag means the following rules won’t be applied.
RewriteRule ^_source - [L]
This is also useful for excluding things like CMS folders from your website’s rewrite rules
RewriteRule ^perch - [L]
Adding or removing www from the domain
Some folk like to use a www and others don’t. Usually, it’s best to pick one and go with it, and redirect the one you don’t want. On this site, we don’t use www.24ways.org so we redirect those requests to 24ways.org.
This uses a RewriteCond which is like an if for a rewrite rule: “If this condition matches, then apply the following rule.” In this case, it’s if the HTTP HOST (or domain name, basically) matches this pattern, then redirect everything:
RewriteCond %{HTTP_HOST} ^www.24ways.org$ [NC]
RewriteRule ^(.*)$ http://24ways.org/$1 [R=301,L]
The [NC] flag means ‘no case’ — the match is case-insensitive. The dots in the domain are escaped with a backslash, as a dot is a regular expression character which means match anything, so we escape it because we literally mean a dot in this instance.
Removing file extensions
Sometimes all you need to do to tidy up a URL is strip off the technology-specific file extension, so that /about/history.php becomes /about/history. This is easily achieved with the help of some more rewrite conditions.
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME}.php -f
RewriteRule ^(.+)$ $1.php [L,QSA]
This says if the file being asked for isn’t a file (!-f) and if it isn’t a directory (!-d) and if the file name plus .php is an actual file (-f) then rewrite by adding .php on the end. The QSA flag means ‘query string append’: append the existing query string onto the rewritten URL.
It’s these sorts of more generic catch-all rules that you need to watch out for when your .htaccess gets rerun after a successful match. Without care they can easily rematch the newly rewritten URL.
Logging for when it all goes wrong
Although not possible within your .htaccess file, if you have access to your Apache configuration files you can enable rewrite logging. This can be useful to track down where a rule is going wrong, if it’s matching incorrectly or failing to match. It also gives you an overview of the amount of work being done by the rewrite engine, enabling you to rearrange your rules and maximise performance.
RewriteEngine On
RewriteLog "/full/system/path/to/rewrite.log"
RewriteLogLevel 5
To be doubly clear: this will not work from an .htaccess file — it needs to be added to the main Apache configuration files. (I sometimes work using MAMP PRO locally on my Mac, and this can be pasted into the snappily named Customized virtual host general settings box in the Advanced tab for your site.)
The white screen of death
One of the most frustrating things when working with rewrite rules is that when you make a mistake it can result in the server returning an HTTP 500 Internal Server Error. This in itself isn’t an error message, of course. It’s more of a notification that an error has occurred. The real error message can usually be found in your Apache error log.
If you have access to your server logs, check the Apache error log and you’ll usually find a much more descriptive error message, pointing you towards your mistake. (Again, if using MAMP PRO, go to Server, Apache and the View Log button.)
In conclusion
Rewriting URLs can be a bear, but the advantages are clear. Keeping a tidy URL structure, disconnected from the technology or file structure of your site can result in URLs that are easier to use and easier to maintain into the future.
If you’re redesigning a site, remember that cool URIs don’t change, so budget some time to make sure that any content you move has a rewrite rule associated with it to keep any links working.
Further reading
To find out more about URL rewriting and perhaps even learn more about regular expressions, I can recommend the following resources.
From the horse’s mouth, the Apache mod_rewrite documentation
Particularly useful with that documentation is the RewriteRule Flags listing
You may wish to don sunglasses to follow the otherwise comprehensive Regular-Expressions.info tutorial
Friend of 24 ways, Neil Crosby has a mod_rewrite Beginner’s Guide which I’ve found handy over the years.
As noted at the start, this isn’t a fully comprehensive guide, but I hope it’s useful in finding your feet with a powerful but sometimes annoying technology. Do you have useful snippets you often use on projects? Feel free to share them in the comments. |
2013 |
Drew McLellan |
drewmclellan |
2013-12-01T00:00:00+00:00 |
https://24ways.org/2013/url-rewriting-for-the-fearful/ |
code |
| 18 |
Grunt for People Who Think Things Like Grunt are Weird and Hard |
Front-end developers are often told to do certain things:
Work in as small chunks of CSS and JavaScript as makes sense to you, then concatenate them together for the production website.
Compress your CSS and minify your JavaScript to make their file sizes as small as possible for your production website.
Optimize your images to reduce their file size without affecting quality.
Use Sass for CSS authoring because of all the useful abstraction it allows.
That’s not a comprehensive list of course, but those are the kind of things we need to do. You might call them tasks.
I bet you’ve heard of Grunt. Well, Grunt is a task runner. Grunt can do all of those things for you. Once you’ve got it set up, which isn’t particularly difficult, those things can happen automatically without you having to think about them again.
But let’s face it: Grunt is one of those fancy newfangled things that all the cool kids seem to be using but at first glance feels strange and intimidating. I hear you. This article is for you.
Let’s nip some misconceptions in the bud right away
Perhaps you’ve heard of Grunt, but haven’t done anything with it. I’m sure that applies to many of you. Maybe one of the following hang-ups applies to you.
I don’t need the things Grunt does
You probably do, actually. Check out that list up top. Those things aren’t nice-to-haves. They are pretty vital parts of website development these days. If you already do all of them, that’s awesome. Perhaps you use a variety of different tools to accomplish them. Grunt can help bring them under one roof, so to speak. If you don’t already do all of them, you probably should and Grunt can help. Then, once you are doing those, you can keep using Grunt to do more for you, which will basically make you better at doing your job.
Grunt runs on Node.js — I don’t know Node
You don’t have to know Node. Just like you don’t have to know Ruby to use Sass. Or PHP to use WordPress. Or C++ to use Microsoft Word.
I have other ways to do the things Grunt could do for me
Are they all organized in one place, configured to run automatically when needed, and shared among every single person working on that project? Unlikely, I’d venture.
Grunt is a command line tool — I’m just a designer
I’m a designer too. I prefer native apps with graphical interfaces when I can get them. But I don’t think that’s going to happen with Grunt1.
The extent to which you need to use the command line is:
Navigate to your project’s directory.
Type grunt and press Return.
After set-up, that is, which again isn’t particularly difficult.
OK. Let’s get Grunt installed
Node is indeed a prerequisite for Grunt. If you don’t have Node installed, don’t worry, it’s very easy. You literally download an installer and run it. Click the big Install button on the Node website.
You install Grunt on a per-project basis. Go to your project’s folder. It needs a file there named package.json at the root level. You can just create one and put it there.
package.json at root
The contents of that file should be this:
{
"name": "example-project",
"version": "0.1.0",
"devDependencies": {
"grunt": "~0.4.1"
}
}
Feel free to change the name of the project and the version, but the devDependencies thing needs to be in there just like that.
This is how Node does dependencies. Node has a package manager called NPM (Node packaged modules) for managing Node dependencies (like a gem for Ruby if you’re familiar with that). You could even think of it a bit like a plug-in for WordPress.
Once that package.json file is in place, go to the terminal and navigate to your folder. Terminal rubes like me do it like this:
Terminal rube changing directories
Then run the command:
npm install
After you’ve run that command, a new folder called node_modules will show up in your project.
Example of node_modules folder
The other files you see there, README.md and LICENSE are there because I’m going to put this project on GitHub and that’s just standard fare there.
The last installation step is to install the Grunt CLI (command line interface). That’s what makes the grunt command in the terminal work. Without it, typing grunt will net you a “Command Not Found”-style error. It is a separate installation for efficiency reasons. Otherwise, if you had ten projects you’d have ten copies of Grunt CLI.
This is a one-liner again. Just run this command in the terminal:
npm install -g grunt-cli
You should close and reopen the terminal as well. That’s a generic good practice to make sure things are working right. Kinda like restarting your computer after you install a new application was in the olden days.
Let’s make Grunt concatenate some files
Perhaps in our project there are three separate JavaScript files:
jquery.js – The library we are using.
carousel.js – A jQuery plug-in we are using.
global.js – Our authored JavaScript file where we configure and call the plug-in.
In production, we would concatenate all those files together for performance reasons (one request is better than three). We need to tell Grunt to do this for us.
But wait. Grunt actually doesn’t do anything all by itself. Remember Grunt is a task runner. The tasks themselves we will need to add. We actually haven’t set up Grunt to do anything yet, so let’s do that.
The official Grunt plug-in for concatenating files is grunt-contrib-concat. You can read about it on GitHub if you want, but all you have to do to use it on your project is to run this command from the terminal (it will henceforth go without saying that you need to run the given commands from your project’s root folder):
npm install grunt-contrib-concat --save-dev
A neat thing about doing it this way: your package.json file will automatically be updated to include this new dependency. Open it up and check it out. You’ll see a new line:
"grunt-contrib-concat": "~0.3.0"
Now we’re ready to use it. To use it we need to start configuring Grunt and telling it what to do.
You tell Grunt what to do via a configuration file named Gruntfile.js2
Just like our package.json file, our Gruntfile.js has a very special format that must be just right. I wouldn’t worry about what every word of this means. Just check out the format:
module.exports = function(grunt) {
// 1. All configuration goes here
grunt.initConfig({
pkg: grunt.file.readJSON('package.json'),
concat: {
// 2. Configuration for concatinating files goes here.
}
});
// 3. Where we tell Grunt we plan to use this plug-in.
grunt.loadNpmTasks('grunt-contrib-concat');
// 4. Where we tell Grunt what to do when we type "grunt" into the terminal.
grunt.registerTask('default', ['concat']);
};
Now we need to create that configuration. The documentation can be overwhelming. Let’s focus just on the very simple usage example.
Remember, we have three JavaScript files we’re trying to concatenate. We’ll list file paths to them under src in an array of file paths (as quoted strings) and then we’ll list a destination file as dest. The destination file doesn’t have to exist yet. It will be created when this task runs and squishes all the files together.
Both our jquery.js and carousel.js files are libraries. We most likely won’t be touching them. So, for organization, we’ll keep them in a /js/libs/ folder. Our global.js file is where we write our own code, so that will be right in the /js/ folder. Now let’s tell Grunt to find all those files and squish them together into a single file named production.js, named that way to indicate it is for use on our real live website.
concat: {
dist: {
src: [
'js/libs/*.js', // All JS in the libs folder
'js/global.js' // This specific file
],
dest: 'js/build/production.js',
}
}
Note: throughout this article there will be little chunks of configuration code like above. The intention is to focus in on the important bits, but it can be confusing at first to see how a particular chunk fits into the larger file. If you ever get confused and need more context, refer to the complete file.
With that concat configuration in place, head over to the terminal, run the command:
grunt
and watch it happen! production.js will be created and will be a perfect concatenation of our three files. This was a big aha! moment for me. Feel the power course through your veins. Let’s do more things!
Let’s make Grunt minify that JavaScript
We have so much prep work done now, adding new tasks for Grunt to run is relatively easy. We just need to:
Find a Grunt plug-in to do what we want
Learn the configuration style of that plug-in
Write that configuration to work with our project
The official plug-in for minifying code is grunt-contrib-uglify. Just like we did last time, we just run an NPM command to install it:
npm install grunt-contrib-uglify --save-dev
Then we alter our Gruntfile.js to load the plug-in:
grunt.loadNpmTasks('grunt-contrib-uglify');
Then we configure it:
uglify: {
build: {
src: 'js/build/production.js',
dest: 'js/build/production.min.js'
}
}
Let’s update that default task to also run minification:
grunt.registerTask('default', ['concat', 'uglify']);
Super-similar to the concatenation set-up, right?
Run grunt at the terminal and you’ll get some deliciously minified JavaScript:
Minified JavaScript
That production.min.js file is what we would load up for use in our index.html file.
Let’s make Grunt optimize our images
We’ve got this down pat now. Let’s just go through the motions. The official image minification plug-in for Grunt is grunt-contrib-imagemin. Install it:
npm install grunt-contrib-imagemin --save-dev
Register it in the Gruntfile.js:
grunt.loadNpmTasks('grunt-contrib-imagemin');
Configure it:
imagemin: {
dynamic: {
files: [{
expand: true,
cwd: 'images/',
src: ['**/*.{png,jpg,gif}'],
dest: 'images/build/'
}]
}
}
Make sure it runs:
grunt.registerTask('default', ['concat', 'uglify', 'imagemin']);
Run grunt and watch that gorgeous squishification happen:
Squished images
Gotta love performance increases for nearly zero effort.
Let’s get a little bit smarter and automate
What we’ve done so far is awesome and incredibly useful. But there are a couple of things we can get smarter on and make things easier on ourselves, as well as Grunt:
Run these tasks automatically when they should
Run only the tasks needed at the time
For instance:
Concatenate and minify JavaScript when JavaScript changes
Optimize images when a new image is added or an existing one changes
We can do this by watching files. We can tell Grunt to keep an eye out for changes to specific places and, when changes happen in those places, run specific tasks. Watching happens through the official grunt-contrib-watch plugin.
I’ll let you install it. It is exactly the same process as the last few plug-ins we installed. We configure it by giving watch specific files (or folders, or both) to watch. By watch, I mean monitor for file changes, file deletions or file additions. Then we tell it what tasks we want to run when it detects a change.
We want to run our concatenation and minification when anything in the /js/ folder changes. When it does, we should run the JavaScript-related tasks. And when things happen elsewhere, we should not run the JavaScript-related tasks, because that would be irrelevant. So:
watch: {
scripts: {
files: ['js/*.js'],
tasks: ['concat', 'uglify'],
options: {
spawn: false,
},
}
}
Feels pretty comfortable at this point, hey? The only weird bit there is the spawn thing. And you know what? I don’t even really know what that does. From what I understand from the documentation it is the smart default. That’s real-world development. Just leave it alone if it’s working and if it’s not, learn more.
Note: Isn’t it frustrating when something that looks so easy in a tutorial doesn’t seem to work for you? If you can’t get Grunt to run after making a change, it’s very likely to be a syntax error in your Gruntfile.js. That might look like this in the terminal:
Errors running Grunt
Usually Grunt is pretty good about letting you know what happened, so be sure to read the error message. In this case, a syntax error in the form of a missing comma foiled me. Adding the comma allowed it to run.
Let’s make Grunt do our preprocessing
The last thing on our list from the top of the article is using Sass — yet another task Grunt is well-suited to run for us. But wait? Isn’t Sass technically in Ruby? Indeed it is. There is a version of Sass that will run in Node and thus not add an additional dependency to our project, but it’s not quite up-to-snuff with the main Ruby project. So, we’ll use the official grunt-contrib-sass plug-in which just assumes you have Sass installed on your machine. If you don’t, follow the command line instructions.
What’s neat about Sass is that it can do concatenation and minification all by itself. So for our little project we can just have it compile our main global.scss file:
sass: {
dist: {
options: {
style: 'compressed'
},
files: {
'css/build/global.css': 'css/global.scss'
}
}
}
We wouldn’t want to manually run this task. We already have the watch plug-in installed, so let’s use it! Within the watch configuration, we’ll add another subtask:
css: {
files: ['css/*.scss'],
tasks: ['sass'],
options: {
spawn: false,
}
}
That’ll do it. Now, every time we change any of our Sass files, the CSS will automaticaly be updated.
Let’s take this one step further (it’s absolutely worth it) and add LiveReload. With LiveReload, you won’t have to go back to your browser and refresh the page. Page refreshes happen automatically and in the case of CSS, new styles are injected without a page refresh (handy for heavily state-based websites).
It’s very easy to set up, since the LiveReload ability is built into the watch plug-in. We just need to:
Install the browser plug-in
Add to the top of the watch configuration:
. watch: {
options: {
livereload: true,
},
scripts: {
/* etc */
Restart the browser and click the LiveReload icon to activate it.
Update some Sass and watch it change the page automatically.
Live reloading browser
Yum.
Prefer a video?
If you’re the type that likes to learn by watching, I’ve made a screencast to accompany this article that I’ve published over on CSS-Tricks: First Moments with Grunt
Leveling up
As you might imagine, there is a lot of leveling up you can do with your build process. It surely could be a full time job in some organizations.
Some hardcore devops nerds might scoff at the simplistic setup we have going here. But I’d advise them to slow their roll. Even what we have done so far is tremendously valuable. And don’t forget this is all free and open source, which is amazing.
You might level up by adding more useful tasks:
Running your CSS through Autoprefixer (A+ Would recommend) instead of a preprocessor add-ons.
Writing and running JavaScript unit tests (example: Jasmine).
Build your image sprites and SVG icons automatically (example: Grunticon).
Start a server, so you can link to assets with proper file paths and use services that require a real URL like TypeKit and such, as well as remove the need for other tools that do this, like MAMP.
Check for code problems with HTML-Inspector, CSS Lint, or JS Hint.
Have new CSS be automatically injected into the browser when it ever changes.
Help you commit or push to a version control repository like GitHub.
Add version numbers to your assets (cache busting).
Help you deploy to a staging or production environment (example: DPLOY).
You might level up by simply understanding more about Grunt itself:
Read Grunt Boilerplate by Mark McDonnell.
Read Grunt Tips and Tricks by Nicolas Bevacqua.
Organize your Gruntfile.js by splitting it up into smaller files.
Check out other people’s and projects’ Gruntfile.js.
Learn more about Grunt by digging into its source and learning about its API.
Let’s share
I think some group sharing would be a nice way to wrap this up. If you are installing Grunt for the first time (or remember doing that), be especially mindful of little frustrating things you experience(d) but work(ed) through. Those are the things we should share in the comments here. That way we have this safe place and useful resource for working through those confusing moments without the embarrassment. We’re all in this thing together!
1 Maybe someday someone will make a beautiful Grunt app for your operating system of choice. But I’m not sure that day will come. The configuration of the plug-ins is the important part of using Grunt. Each plug-in is a bit different, depending on what it does. That means a uniquely considered UI for every single plug-in, which is a long shot.
Perhaps a decent middleground is this Grunt DevTools Chrome add-on.
2 Gruntfile.js is often referred to as Gruntfile in documentation and examples. Don’t literally name it Gruntfile — it won’t work. |
2013 |
Chris Coyier |
chriscoyier |
2013-12-11T00:00:00+00:00 |
https://24ways.org/2013/grunt-is-not-weird-and-hard/ |
code |
| 20 |
Make Your Browser Dance |
It was a crisp winter’s evening when I pulled up alongside the pier. I stepped out of my car and the bitterly cold sea air hit my face. I walked around to the boot, opened it and heaved out a heavy flight case. I slammed the boot shut, locked the car and started walking towards the venue.
This was it. My first gig. I thought about all those weeks of preparation: editing video clips, creating 3-D objects, making coloured patterns, then importing them all into software and configuring effects to change as the music did; targeting frequency, beat, velocity, modifying size, colour, starting point; creating playlists of these… and working out ways to mix them as the music played.
This was it. This was me VJing.
This was all a lifetime (well a decade!) ago.
When I started web designing, VJing took a back seat. I was more interested in interactive layouts, semantic accessible HTML, learning all the IE bugs and mastering the quirks that CSS has to offer. More recently, I have been excited by background gradients, 3-D transforms, the @keyframe directive, as well as new APIs such as getUserMedia, indexedDB, the Web Audio API
But wait, have I just come full circle? Could it be possible, with these wonderful new things in technologies I am already familiar with, that I could VJ again, right here, in a browser?
Well, there’s only one thing to do: let’s try it!
Let’s take to the dance floor
Over the past couple of years working in The Lab I have learned to take a much more iterative approach to projects than before. One of my new favourite methods of working is to create a proof of concept to make sure my theory is feasible, before going on to create a full-blown product. So let’s take the same approach here.
The main VJing functionality I want to recreate is manipulating visuals in relation to sound. So for my POC I need to create a visual, with parameters that can be changed, then get some sound and see if I can analyse that sound to detect some data, which I can then use to manipulate the visual parameters. Easy, right?
So, let’s start at the beginning: creating a simple visual. For this I’m going to create a CSS animation. It’s just a funky i element with the opacity being changed to make it flash.
See the Pen Creating a light by Rumyra (@Rumyra) on CodePen
A note about prefixes: I’ve left them out of the code examples in this post to make them easier to read. Please be aware that you may need them. I find a great resource to find out if you do is caniuse.com. You can also check out all the code for the examples in this article
Start the music
Well, that’s pretty easy so far. Next up: loading in some sound. For this we’ll use the Web Audio API. The Web Audio API is based around the concept of nodes. You have a source node: the sound you are loading in; a destination node: usually the device’s speakers; and any number of processing nodes in between. All this processing that goes on with the audio is sandboxed within the AudioContext.
So, let’s start by initialising our audio context.
var contextClass = window.AudioContext;
if (contextClass) {
//web audio api available.
var audioContext = new contextClass();
} else {
//web audio api unavailable
//warn user to upgrade/change browser
}
Now let’s load our sound file into the new context we created with an XMLHttpRequest.
function loadSound() {
//set audio file url
var audioFileUrl = '/octave.ogg';
//create new request
var request = new XMLHttpRequest();
request.open("GET", audioFileUrl, true);
request.responseType = "arraybuffer";
request.onload = function() {
//take from http request and decode into buffer
context.decodeAudioData(request.response, function(buffer) {
audioBuffer = buffer;
});
}
request.send();
}
Phew! Now we’ve loaded in some sound! There are plenty of things we can do with the Web Audio API: increase volume; add filters; spatialisation. If you want to dig deeper, the O’Reilly Web Audio API book by Boris Smus is available to read online free.
All we really want to do for this proof of concept, however, is analyse the sound data. To do this we really need to know what data we have.
Learning the steps
Let’s take a minute to step back and remember our school days and science class. I’m sure if I drew a picture of a sound wave, we would all start nodding our heads.
The sound you hear is caused by pressure differences in the particles in the air. Sound pushes these particles together, causing vibrations. Amplitude is basically strength of pressure. A simple example of change of amplitude is when you increase the volume on your stereo and the output wave increases in size.
This is great when everything is analogue, but the waveform varies continuously and it’s not suitable for digital processing: there’s an infinite set of values. For digital processing, we need discrete numbers.
We have to sample the waveform at set time intervals, and record data such as amplitude and frequency. Luckily for us, just the fact we have a digital sound file means all this hard work is done for us. What we’re doing in the code above is piping that data in the audio context. All we need to do now is access it.
We can do this with the Web Audio API’s analysing functionality. Just pop in an analysing node before we connect the source to its destination node.
function createAnalyser(source) {
//create analyser node
analyser = audioContext.createAnalyser();
//connect to source
source.connect(analyzer);
//pipe to speakers
analyser.connect(audioContext.destination);
}
The data I’m really interested in here is frequency. Later we could look into amplitude or time, but for now I’m going to stick with frequency.
The analyser node gives us frequency data via the getFrequencyByteData method.
Don’t forget to count!
To collect the data from the getFrequencyByteData method, we need to pass in an empty array (a JavaScript typed array is ideal). But how do we know how many items the array will need when we create it?
This is really up to us and how high the resolution of frequencies we want to analyse is. Remember we talked about sampling the waveform; this happens at a certain rate (sample rate) which you can find out via the audio context’s sampleRate attribute. This is good to bear in mind when you’re thinking about your resolution of frequencies.
var sampleRate = audioContext.sampleRate;
Let’s say your file sample rate is 48,000, making the maximum frequency in the file 24,000Hz (thanks to a wonderful theorem from Dr Harry Nyquist, the maximum frequency in the file is always half the sample rate). The analyser array we’re creating will contain frequencies up to this point. This is ideal as the human ear hears the range 0–20,000hz.
So, if we create an array which has 2,400 items, each frequency recorded will be 10Hz apart. However, we are going to create an array which is half the size of the FFT (fast Fourier transform), which in this case is 2,048 which is the default. You can set it via the fftSize property.
//set our FFT size
analyzer.fftSize = 2048;
//create an empty array with 1024 items
var frequencyData = new Uint8Array(1024);
So, with an array of 1,024 items, and a frequency range of 24,000Hz, we know each item is 24,000 ÷ 1,024 = 23.44Hz apart.
The thing is, we also want that array to be updated constantly. We could use the setInterval or setTimeout methods for this; however, I prefer the new and shiny requestAnimationFrame.
function update() {
//constantly getting feedback from data
requestAnimationFrame(update);
analyzer.getByteFrequencyData(frequencyData);
}
Putting it all together
Sweet sticks! Now we have an array of frequencies from the sound we loaded, updating as the sound plays. Now we want that data to trigger our animation from earlier.
We can easily pause and run our CSS animation from JavaScript:
element.style.webkitAnimationPlayState = "paused";
element.style.webkitAnimationPlayState = "running";
Unfortunately, this may not be ideal as our animation might be a whole heap longer than just a flashing light. We may want to target specific points within that animation to have it stop and start in a visually pleasing way and perhaps not smack bang in the middle.
There is no really easy way to do this at the moment as Zach Saucier explains in this wonderful article. It takes some jiggery pokery with setInterval to try to ascertain how far through the CSS animation you are in percentage terms.
This seems a bit much for our proof of concept, so let’s backtrack a little. We know by the animation we’ve created which CSS properties we want to change. This is pretty easy to do directly with JavaScript.
element.style.opacity = "1";
element.style.opacity = "0.2";
So let’s start putting it all together. For this example I want to trigger each light as a different frequency plays. For this, I’ll loop through the HTML elements and change the opacity style if the frequency gain goes over a certain threshold.
//get light elements
var lights = document.getElementsByTagName('i');
var totalLights = lights.length;
for (var i=0; i<totalLights; i++) {
//get frequencyData key
var freqDataKey = i*8;
//if gain is over threshold for that frequency animate light
if (frequencyData[freqDataKey] > 160){
//start animation on element
lights[i].style.opacity = "1";
} else {
lights[i].style.opacity = "0.2";
}
}
See all the code in action here. I suggest viewing in a modern browser :)
Awesome! It is true — we can VJ in our browser!
Let’s dance!
So, let’s start to expand this simple example. First, I feel the need to make lots of lights, rather than just a few. Also, maybe we should try a sound file more suited to gigs or clubs.
Check it out!
I don’t know about you, but I’m pretty excited — that’s just a bit of HTML, CSS and JavaScript!
The other thing to think about, of course, is the sound that you would get at a venue. We don’t want to load sound from a file, but rather pick up on what is playing in real time. The easiest way to do this, I’ve found, is to capture what my laptop’s mic is picking up and piping that back into the audio context. We can do this by using getUserMedia.
Let’s include this in this demo. If you make some noise while viewing the demo, the lights will start to flash.
And relax :)
There you have it. Sit back, play some music and enjoy the Winamp like experience in front of you.
So, where do we go from here? I already have a wealth of ideas. We haven’t started with canvas, SVG or the 3-D features of CSS. There are other things we can detect from the audio as well. And yes, OK, it’s questionable whether the browser is the best environment for this. For one, I’m using a whole bunch of nonsensical HTML elements (maybe each animation could be held within a web component in the future). But hey, it’s fun, and it looks cool and sometimes I think it’s OK to just dance. |
2013 |
Ruth John |
ruthjohn |
2013-12-02T00:00:00+00:00 |
https://24ways.org/2013/make-your-browser-dance/ |
code |
| 21 |
Keeping Parts of Your Codebase Private on GitHub |
Open source is brilliant, there’s no denying that, and GitHub has been instrumental in open source’s recent success. I’m a keen open-sourcerer myself, and I have a number of projects on GitHub. However, as great as sharing code is, we often want to keep some projects to ourselves. To this end, GitHub created private repositories which act like any other Git repository, only, well, private!
A slightly less common issue, and one I’ve come up against myself, is the desire to only keep certain parts of a codebase private. A great example would be my site, CSS Wizardry; I want the code to be open source so that people can poke through and learn from it, but I want to keep any draft blog posts private until they are ready to go live. Thankfully, there is a very simple solution to this particular problem: using multiple remotes.
Before we begin, it’s worth noting that you can actually build a GitHub Pages site from a private repo. You can keep the entire source private, but still have GitHub build and display a full Pages/Jekyll site. I do this with csswizardry.net. This post will deal with the more specific problem of keeping only certain parts of the codebase (branches) private, and expose parts of it as either an open source project, or a built GitHub Pages site.
N.B. This post requires some basic Git knowledge.
Adding your public remote
Let’s assume you’re starting from scratch and you currently have no repos set up for your project. (If you do already have your public repo set up, skip to the “Adding your private remote” section.)
So, we have a clean slate: nothing has been set up yet, we’re doing all of that now. On GitHub, create two repositories. For the sake of this article we shall call them site.com and private.site.com. Make the site.com repo public, and the private.site.com repo private (you will need a paid GitHub account).
On your machine, create the site.com directory, in which your project will live. Do your initial work in there, commit some stuff — whatever you need to do. Now we need to link this local Git repo on your machine with the public repo (remote) on GitHub. We should all be used to this:
$ git remote add origin git@github.com:[user]/site.com.git
Here we are simply telling Git to add a remote called origin which lives at git@github.com:[user]/site.com.git. Simple stuff. Now we need to push our current branch (which will be master, unless you’ve explicitly changed it) to that remote:
$ git push -u origin master
Here we are telling Git to push our master branch to a corresponding master branch on the remote called origin, which we just added. The -u sets upstream tracking, which basically tells Git to always shuttle code on this branch between the local master branch and the master branch on the origin remote. Without upstream tracking, you would have to tell Git where to push code to (and pull it from) every time you ran the push or pull commands. This sets up a permanent bond, if you like.
This is really simple stuff, stuff that you will probably have done a hundred times before as a Git user. Now to set up our private remote.
Adding your private remote
We’ve set up our public, open source repository on GitHub, and linked that to the repository on our machine. All of this code will be publicly viewable on GitHub.com. (Remember, GitHub is just a host of regular Git repositories, which also puts a nice GUI around it all.) We want to add the ability to keep certain parts of the codebase private. What we do now is add another remote repository to the same local repository. We have two repos on GitHub (site.com and private.site.com), but only one repository (and, therefore, one directory) on our machine. Two GitHub repos, and one local one.
In your local repo, check out a new branch. For the sake of this article we shall call the branch dev. This branch might contain work in progress, or draft blog posts, or anything you don’t want to be made publicly viewable on GitHub.com. The contents of this branch will, in a moment, live in our private repository.
$ git checkout -b dev
We have now made a new branch called dev off the branch we were on last (master, unless you renamed it).
Now we need to add our private remote (private.site.com) so that, in a second, we can send this branch to that remote:
$ git remote add private git@github.com:[user]/private.site.com.git
Like before, we are just telling Git to add a new remote to this repo, only this time we’ve called it private and it lives at git@github.com:[user]/private.site.com.git. We now have one local repo on our machine which has two remote repositories associated with it.
Now we need to tell our dev branch to push to our private remote:
$ git push -u private dev
Here, as before, we are pushing some code to a repo. We are saying that we want to push the dev branch to the private remote, and, once again, we’ve set up upstream tracking. This means that, by default, the dev branch will only push and pull to and from the private remote (unless you ever explicitly state otherwise).
Now you have two branches (master and dev respectively) that push to two remotes (origin and private respectively) which are public and private respectively.
Any work we do on the master branch will push and pull to and from our publicly viewable remote, and any code on the dev branch will push and pull from our private, hidden remote.
Adding more branches
So far we’ve only looked at two branches pushing to two remotes, but this workflow can grow as much or as little as you’d like. Of course, you’d never do all your work in only two branches, so you might want to push any number of them to either your public or private remotes. Let’s imagine we want to create a branch to try something out real quickly:
$ git checkout -b test
Now, when we come to push this branch, we can choose which remote we send it to:
$ git push -u private test
This pushes the new test branch to our private remote (again, setting the persistent tracking with -u).
You can have as many or as few remotes or branches as you like.
Combining the two
Let’s say you’ve been working on a new feature in private for a few days, and you’ve kept that on the private remote. You’ve now finalised the addition and want to move it into your public repo. This is just a simple merge. Check out your master branch:
$ git checkout master
Then merge in the branch that contained the feature:
$ git merge dev
Now master contains the commits that were made on dev and, once you’ve pushed master to its remote, those commits will be viewable publicly on GitHub:
$ git push
Note that we can just run $ git push on the master branch as we’d previously set up our upstream tracking (-u).
Multiple machines
So far this has covered working on just one machine; we had two GitHub remotes and one local repository. Let’s say you’ve got yourself a new Mac (yay!) and you want to clone an existing project:
$ git clone git@github.com:[user]/site.com.git
This will not clone any information about the remotes you had set up on the previous machine. Here you have a fresh clone of the public project and you will need to add the private remote to it again, as above.
Done!
If you’d like to see me blitz through all that in one go, check the showterm recording.
The beauty of this is that we can still share our code, but we don’t have to develop quite so openly all of the time. Building a framework with a killer new feature? Keep it in a private branch until it’s ready for merge. Have a blog post in a Jekyll site that you’re not ready to make live? Keep it in a private drafts branch. Working on a new feature for your personal site? Tuck it away until it’s finished. Need a staging area for a Pages-powered site? Make a staging remote with its own custom domain.
All this boils down to, really, is the fact that you can bring multiple remotes together into one local codebase on your machine. What you do with them is entirely up to you! |
2013 |
Harry Roberts |
harryroberts |
2013-12-09T00:00:00+00:00 |
https://24ways.org/2013/keeping-parts-of-your-codebase-private-on-github/ |
code |
| 30 |
Making Sites More Responsive, Responsibly |
With digital projects we’re used to shifting our thinking to align with our target audience. We may undertake research, create personas, identify key tasks, or observe usage patterns, with our findings helping to refine our ongoing creations. A product’s overall experience can make or break its success, and when it comes to defining these experiences our development choices play a huge role alongside more traditional user-focused activities.
The popularisation of responsive web design is a great example of how we are able to shape the web’s direction through using technology to provide better experiences. If we think back to the move from table-based layouts to CSS, initially our clients often didn’t know or care about the difference in these approaches, but we did. Responsive design was similar in this respect – momentum grew through the web industry choosing to use an approach that we felt would give a better experience, and which was more future-friendly.
We tend to think of responsive design as a means of displaying content appropriately across a range of devices, but the technology and our implementation of it can facilitate much more. A responsive layout not only helps your content work when the newest smartphone comes out, but it also ensures your layout suitably adapts if a visually impaired user drastically changes the size of the text.
The 24 ways site at 400% on a Retina MacBook Pro displays a layout more typically used for small screens.
When we think more broadly, we realise that our technical choices and approaches to implementation can have knock-on effects for the greater good, and beyond our initial target audiences. We can make our experiences more responsive to people’s needs, enhancing their usability and accessibility along the way.
Being responsibly responsive
Of course, when we think about being more responsive, there’s a fine line between creating useful functionality and becoming intrusive and overly complex. In the excellent Responsible Responsive Design, Scott Jehl states that:
A responsible responsive design equally considers the following throughout a project:
Usability: The way a website’s user interface is presented to the user, and how that UI responds to browsing conditions and user interactions.
Access: The ability for users of all devices, browsers, and assistive technologies to access and understand a site’s features and content.
Sustainability: The ability for the technology driving a site or application to work for devices that exist today and to continue to be usable and accessible to users, devices, and browsers in the future.
Performance: The speed at which a site’s features and content are perceived to be delivered to the user and the efficiency with which they operate within the user interface.
Scott’s book covers these ideas in a lot more detail than I’ll be able to here (put it on your Christmas list if it’s not there already), but for now let’s think a bit more about our roles as digital creators and the power this gives us.
Our choices around technology and the decisions we have to make can be extremely wide-ranging. Solutions will vary hugely depending on the needs of each project, though we can further explore the concept of making our creations more responsive through the use of humble web technologies.
The power of the web
We all know that under the HTML5 umbrella are some great new capabilities, including a number of JavaScript APIs such as geolocation, web audio, the file API and many more. We often use these to enhance the functionality of our sites and apps, to add in new features, or to facilitate device-specific interactions.
You’ll have seen articles with flashy titles such as “Top 5 JavaScript APIs You’ve Never Heard Of!”, which you’ll probably read, think “That’s quite cool”, yet never use in any real work.
There is great potential for technologies like these to be misused, but there are also great prospects for them to be used well to enhance experiences. Let’s have a look at a few examples you may not have considered.
Offline first
When we make websites, many of us follow a process which involves user stories – standardised snippets of context explaining who needs what, and why.
“As a student I want to pay online for my course so I don’t have to visit the college in person.”
“As a retailer I want to generate unique product codes so I can manage my stock.”
We very often focus heavily on what needs doing, but may not consider carefully how it will be done. As in Scott’s list, accessibility is extremely important, not only in terms of providing a great experience to users of assistive technologies, but also to make your creation more accessible in the general sense – including under different conditions.
Offline first is yet another ‘first’ methodology (my personal favourite being ‘tea first’), which encourages us to develop so that connectivity itself is an enhancement – letting users continue with tasks even when they’re offline. Despite the rapid growth in public Wi-Fi, if we consider data costs and connectivity in developing countries, our travel habits with planes, underground trains and roaming (or simply if you live in the UK’s signal-barren East Anglian wilderness as I do), then you’ll realise that connectivity isn’t as ubiquitous as our internet-addled brains would make us believe. Take a scenario that I’m sure we’re all familiar with – the digital conference. Your venue may be in a city served by high-speed networks, but after overloading capacity with a full house of hashtag-hungry attendees, each carrying several devices, then everyone’s likely to be offline after all. Wouldn’t it be better if we could do something like this instead?
Someone visits our conference website.
On this initial run, some assets may be cached for future use: the conference schedule, the site’s CSS, photos of the speakers.
When the attendee revisits the site on the day, the page shell loads up from the cache.
If we have cached content (our session timetable, speaker photos or anything else), we can load it directly from the cache. We might then try to update this, or get some new content from the internet, but the conference attendee already has a base experience to use.
If we don’t have something cached already, then we can try grabbing it online.
If for any reason our requests for new content fail (we’re offline), then we can display a pre-cached error message from the initial load, perhaps providing our users with alternative suggestions from what is cached.
There are a number of ways we can make something like this, including using the application cache (AppCache) if you’re that way inclined. However, you may want to look into service workers instead. There are also some great resources on Offline First! if you’d like to find out more about this.
Building in offline functionality isn’t necessarily about starting offline first, and it’s also perfectly possible to retrofit sites and apps to catch offline scenarios, but this kind of graceful degradation can end up being more complex than if we’d considered it from the start. By treating connectivity as an enhancement, we can improve the experience and provide better performance than we can when waiting to counter failures. Our websites can respond to connectivity and usage scenarios, on top of adapting how we present our content. Thinking in this way can enhance each point in Scott’s criteria.
As I mentioned, this isn’t necessarily the kind of development choice that our clients will ask us for, but it’s one we may decide is simply the right way to build based on our project, enhancing the experience we provide to people, and making it more responsive to their situation.
Even more accessible
We’ve looked at accessibility in terms of broadening when we can interact with a website, but what about how? Our user stories and personas are often of limited use. We refer in very general terms to students, retailers, and sometimes just users. What if we have a student whose needs are very different from another student? Can we make our sites even more usable and accessible through our development choices?
Again using JavaScript to illustrate this concept, we can do a lot more with the ways people interact with our websites, and with the feedback we provide, than simply accepting keyboard, mouse and touch inputs and displaying output on a screen.
Input
Ambient light detection is one of those features that looks great in simple demos, but which we struggle to put to practical use. It’s not new – many satnav systems automatically change the contrast for driving at night or in tunnels, and our laptops may alter the screen brightness or keyboard backlighting to better adapt to our surroundings. Using web technologies we can adapt our presentation to be better suited to ambient light levels.
If our device has an appropriate light sensor and runs a browser that supports the API, we can grab the ambient light in units using ambient light events, in JavaScript. We may then change our presentation based on different bandings, perhaps like this:
window.addEventListener('devicelight', function(e) {
var lux = e.value;
if (lux < 50) {
//Change things for dim light
}
if (lux >= 50 && lux <= 10000) {
//Change things for normal light
}
if (lux > 10000) {
//Change things for bright light
}
});
Live demo (requires light sensor and supported browser).
Soon we may also be able to do such detection through CSS, with light-level being cited in the Media Queries Level 4 specification. If that becomes the case, it’ll probably look something like this:
@media (light-level: dim) {
/*Change things for dim light*/
}
@media (light-level: normal) {
/*Change things for normal light*/
}
@media (light-level: washed) {
/*Change things for bright light*/
}
While we may be quick to dismiss this kind of detection as being a gimmick, it’s important to consider that apps such as Light Detector, listed on Apple’s accessibility page, provide important context around exactly this functionality.
“If you are blind, Light Detector helps you to be more independent in many daily activities. At home, point your iPhone towards the ceiling to understand where the light fixtures are and whether they are switched on. In a room, move the device along the wall to check if there is a window and where it is. You can find out whether the shades are drawn by moving the device up and down.”
everywaretechnologies.com/apps/lightdetector
Input can be about so much more than what we enter through keyboards. Both an ever increasing amount of available sensors and more APIs being supported by the major browsers will allow us to cater for more scenarios and respond to them accordingly. This can be as complex or simple as you need; for instance, while x-webkit-speech has been deprecated, the web speech API is available for a number of browsers, and research into sign language detection is also being performed by organisations such as Microsoft.
Output
Web technologies give us some great enhancements around input, allowing us to adapt our experiences accordingly. They also provide us with some nice ways to provide feedback to users.
When we play video games, many of our modern consoles come with the ability to have rumble effects on our controller pads. These are a great example of an enhancement, as they provide a level of feedback that is entirely optional, but which can give a great deal of extra information to the player in the right circumstances, and broaden the scope of our comprehension beyond what we’re seeing and hearing.
Haptic feedback is possible on the web as well. We could use this in any number of responsible applications, such as alerting a user to changes or using different patterns as a communication mechanism. If you find yourself in a pickle, here’s how to print out SOS in Morse code through the vibration API. The following code indicates the length of vibration in milliseconds, interspersed by pauses in milliseconds.
navigator.vibrate([100, 300, 100, 300, 100, 300, 600, 300, 600, 300, 600, 300, 100, 300, 100, 300, 100]);
Live demo (requires supported browser)
With great power…
What you’ve no doubt come to realise by now is that these are just more examples of progressive enhancement, whose inclusion will provide a better experience if the capabilities are available, but which we should not rely on. This idea isn’t new, but the most important thing to remember, and what I would like you to take away from this article, is that it is up to us to decide to include these kind of approaches within our projects – if we don’t root for them, they probably won’t happen. This is where our professional responsibility comes in.
We won’t necessarily be asked to implement solutions for the scenarios above, but they illustrate how we can help to push the boundaries of experiences. Maybe we’ll have to switch our thinking about how we build, but we can create more usable products for a diverse range of people and usage scenarios through the choices we make around technology. Let’s stop thinking simply in terms of features inside a narrow view of our target users, and work out how we can extend these to cater for a wider set of situations.
When you plan your next digital project, consider the power of the web and the enhancements we can use, and try to make your projects even more responsive and responsible. |
2014 |
Sally Jenkinson |
sallyjenkinson |
2014-12-10T00:00:00+00:00 |
https://24ways.org/2014/making-sites-more-responsive-responsibly/ |
code |
| 31 |
Dealing with Emergencies in Git |
The stockings were hung by the chimney with care,
In hopes that version control soon would be there.
This summer I moved to the UK with my partner, and the onslaught of the Christmas holiday season began around the end of October (October!). It does mean that I’ve had more than a fair amount of time to come up with horrible Git analogies for this article. Analogies, metaphors, and comparisons help the learner hook into existing mental models about how a system works. They only help, however, if the learner has enough familiarity with the topic at hand to make the connection between the old and new information.
Let’s start by painting an updated version of Clement Clarke Moore’s Christmas living room. Empty stockings are hung up next to the fireplace, waiting for Saint Nicholas to come down the chimney and fill them with small treats. Holiday treats are scattered about. A bowl of mixed nuts, the holiday nutcracker, and a few clementines. A string of coloured lights winds its way up an evergreen.
Perhaps a few of these images are familiar, or maybe they’re just settings you’ve seen in a movie. It doesn’t really matter what the living room looks like though. The important thing is to ground yourself in your own experiences before tackling a new subject. Instead of trying to brute-force your way into new information, as an adult learner constantly ask yourself: ‘What is this like? What does this remind me of? What do I already know that I can use to map out this new territory?’ It’s okay if the map isn’t perfect. As you refine your understanding of a new topic, you’ll outgrow the initial metaphors, analogies, and comparisons.
With apologies to Mr. Moore, let’s give it a try.
Getting Interrupted in Git
When on the roof there arose such a clatter!
You’re happily working on your software project when all of a sudden there are freaking reindeer on the roof! Whatever you’ve been working on is going to need to wait while you investigate the commotion.
If you’ve got even a little bit of experience working with Git, you know that you cannot simply change what you’re working on in times of emergency. If you’ve been doing work, you have a dirty working directory and you cannot change branches, or push your work to a remote repository while in this state.
Up to this point, you’ve probably dealt with emergencies by making a somewhat useless commit with a message something to the effect of ‘switching branches for a sec’. This isn’t exactly helpful to future you, as commits should really contain whole ideas of completed work. If you get interrupted, especially if there are reindeer on the roof, the chances are very high that you weren’t finished with what you were working on.
You don’t need to make useless commits though. Instead, you can use the stash command. This command allows you to temporarily set aside all of your changes so that you can come back to them later. In this sense, stash is like setting your book down on the side table (or pushing the cat off your lap) so you can go investigate the noise on the roof. You aren’t putting your book away though, you’re just putting it down for a moment so you can come back and find it exactly the way it was when you put it down.
Let’s say you’ve been working in the branch waiting-for-st-nicholas, and now you need to temporarily set aside your changes to see what the noise was on the roof:
$ git stash
After running this command, all uncommitted work will be temporarily removed from your working directory, and you will be returned to whatever state you were in the last time you committed your work.
With the book safely on the side table, and the cat safely off your lap, you are now free to investigate the noise on the roof. It turns out it’s not reindeer after all, but just your boss who thought they’d help out by writing some code on the project you’ve been working on. Bless. Rolling your eyes, you agree to take a look and see what kind of mischief your boss has gotten themselves into this time.
You fetch an updated list of branches from the remote repository, locate the branch your boss had been working on, and checkout a local copy:
$ git fetch
$ git branch -r
$ git checkout -b helpful-boss-branch origin/helpful-boss-branch
You are now in a local copy of the branch where you are free to look around, and figure out exactly what’s going on.
You sigh audibly and say, ‘Okay. Tell me what was happening when you first realised you’d gotten into a mess’ as you look through the log messages for the branch.
$ git log --oneline
$ git log
By using the log command you will be able to review the history of the branch and find out the moment right before your boss ended up stuck on your roof.
You may also want to compare the work your boss has done to the main branch for your project. For this article, we’ll assume the main branch is named master.
$ git diff master
Looking through the commits, you may be able to see that things started out okay but then took a turn for the worse.
Checking out a single commit
Using commands you’re already familiar with, you can rewind through history and take a look at the state of the code at any moment in time by checking out a single commit, just like you would a branch.
Using the log command, locate the unique identifier (commit hash) of the commit you want to investigate. For example, let’s say the unique identifier you want to checkout is 25f6d7f.
$ git checkout 25f6d7f
Note: checking out '25f6d7f'.
You are in 'detached HEAD' state. You can look around,
make experimental changes and commit them, and you can
discard any commits you make in this state without
impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using @-b@ with the checkout command again. Example:
$ git checkout -b new_branch_name
HEAD is now at 25f6d7f... Removed first paragraph.
This is usually where people start to panic. Your boss screwed something up, and now your HEAD is detached. Under normal circumstances, these words would be a very good reason to panic.
Take a deep breath. Nothing bad is going to happen. Being in a detached HEAD state just means you’ve temporarily disconnected from a known chain of events. In other words, you’re currently looking at the middle of a story (or branch) about what happened – and you’re not at the endpoint for this particular story.
Git allows you to view the history of your repository as a timeline (technically it’s a directed acyclic graph). When you make commits which are not associated with a branch, they are essentially inaccessible once you return to a known branch. If you make commits while you’re in a detached HEAD state, and then try to return to a known branch, Git will give you a warning and tell you how to save your work.
$ git checkout master
Warning: you are leaving 1 commit behind, not connected to
any of your branches:
7a85788 Your witty holiday commit message.
If you want to keep them by creating a new branch, this may be a good time to do so with:
$ git branch new_branch_name 7a85788
Switched to branch 'master'
Your branch is up-to-date with 'origin/master'.
So, if you want to save the commits you’ve made while in a detached HEAD state, you simply need to put them on a new branch.
$ git branch saved-headless-commits 7a85788
With this trick under your belt, you can jingle around in history as much as you’d like. It’s not like sliding around on a timeline though. When you checkout a specific commit, you will only have access to the history from that point backwards in time. If you want to move forward in history, you’ll need to move back to the branch tip by checking out the branch again.
$ git checkout helpful-boss-branch
You’re now back to the present. Your HEAD is now pointing to the endpoint of a known branch, and so it is no longer detached. Any changes you made while on your adventure are safely stored in a new branch, assuming you’ve followed the instructions Git gave you. That wasn’t so scary after all, now, was it?
Back to our reindeer problem.
If your boss is anything like the bosses I’ve worked with, chances are very good that at least some of their work is worth salvaging. Depending on how your repository is structured, you’ll want to capture the good work using one of several different methods.
Back in the living room, we’ll use our bowl of nuts to illustrate how you can rescue a tiny bit of work.
Saving just one commit
About that bowl of nuts. If you’re like me, you probably had some favourite kinds of nuts from an assorted collection. Walnuts were generally the most satisfying to crack open. So, instead of taking the entire bowl of nuts and dumping it into a stocking (merging the stocking and the bowl of nuts), we’re just going to pick out one nut from the bowl. In Git terms, we’re going to cherry-pick a commit and save it to another branch.
First, checkout the main branch for your development work. From this branch, create a new branch where you can copy the changes into.
$ git checkout master
$ git checkout -b rescue-the-boss
From your boss’s branch, helpful-boss-branch locate the commit you want to keep.
$ git log --oneline helpful-boss-branch
Let’s say the commit ID you want to keep is e08740b. From your rescue branch, use the command cherry-pick to copy the changes into your current branch.
$ git cherry-pick e08740b
If you review the history of your current branch again, you will see you now also have the changes made in the commit in your boss’s branch.
At this point you might need to make a few additional fixes to help your boss out. (You’re angling for a bonus out of all this. Go the extra mile.) Once you’ve made your additional changes, you’ll need to add that work to the branch as well.
$ git add [filename(s)]
$ git commit -m "Building on boss's work to improve feature X."
Go ahead and test everything, and make sure it’s perfect. You don’t want to introduce your own mistakes during the rescue mission!
Uploading the fixed branch
The next step is to upload the new branch to the remote repository so that your boss can download it and give you a huge bonus for helping you fix their branch.
$ git push -u origin rescue-the-boss
Cleaning up and getting back to work
With your boss rescued, and your bonus secured, you can now delete the local temporary branches.
$ git branch --delete rescue-the-boss
$ git branch --delete helpful-boss-branch
And settle back into your chair to wait for Saint Nicholas with your book, your branch, and possibly your cat.
$ git checkout waiting-for-st-nicholas
$ git stash pop
Your working directory has been returned to exactly the same state you were in at the beginning of the article.
Having fun with analogies
I’ve had a bit of fun with analogies in this article. But sometimes those little twists on ideas can really help someone pick up a new idea (git stash: it’s like when Christmas comes around and everyone throws their fashion sense out the window and puts on a reindeer sweater for the holiday party; or git bisect: it’s like trying to find that one broken light on the string of Christmas lights). It doesn’t matter if the analogy isn’t perfect. It’s just a way to give someone a temporary hook into a concept in a way that makes the concept accessible while the learner becomes comfortable with it. As the learner’s comfort increases, the analogies can drop away, making room for the technically correct definition of how something works.
Or, if you’re like me, you can choose to never grow old and just keep mucking about in the analogies. I’d argue it’s a lot more fun to play with a string of Christmas lights and some holiday cheer than a directed acyclic graph anyway. |
2014 |
Emma Jane Westby |
emmajanewestby |
2014-12-02T00:00:00+00:00 |
https://24ways.org/2014/dealing-with-emergencies-in-git/ |
code |
| 36 |
Naming Things |
There are only two hard things in computer science: cache invalidation and naming things.
Phil Karlton
Being a professional web developer means taking responsibility for the code you write and ensuring it is comprehensible to others. Having a documented code style is one means of achieving this, although the size and type of project you’re working on will dictate the conventions used and how rigorously they are enforced.
Working in-house may mean working with multiple developers, perhaps in distributed teams, who are all committing changes – possibly to a significant codebase – at the same time. Left unchecked, this codebase can become unwieldy. Coding conventions ensure everyone can contribute, and help build a product that works as a coherent whole.
Even on smaller projects, perhaps working within an agency or by yourself, at some point the resulting product will need to be handed over to a third party. It’s sensible, therefore, to ensure that your code can be understood by those who’ll eventually take ownership of it.
Put simply, code is read more often than it is written or changed. A consistent and predictable naming scheme can make code easier for other developers to understand, improve and maintain, presumably leaving them free to worry about cache invalidation.
Let’s talk about semantics
Names not only allow us to identify objects, but they can also help us describe the objects being identified.
Semantics (the meaning or interpretation of words) is the cornerstone of standards-based web development. Using appropriate HTML elements allows us to create documents and applications that have implicit structural meaning. Thanks to HTML5, the vocabulary we can choose from has grown even larger.
HTML elements provide one level of meaning: a widely accepted description of a document’s underlying structure. It’s only with the mutual agreement of browser vendors and developers that <p> indicates a paragraph.
Yet (with the exception of widely accepted microdata and microformat schemas) only HTML elements convey any meaning that can be parsed consistently by user agents. While using semantic values for class names is a noble endeavour, they provide no additional information to the visitor of a website; take them away and a document will have exactly the same semantic value.
I didn’t always think this was the case, but the real world has a habit of changing your opinion. Much of my thinking around semantics has been informed by the writing of my peers. In “About HTML semantics and front-end architecture”, Nicholas Gallagher wrote:
The important thing for class name semantics in non-trivial applications is that they be driven by pragmatism and best serve their primary purpose – providing meaningful, flexible, and reusable presentational/behavioural hooks for developers to use.
These thoughts are echoed by Harry Roberts in his CSS Guidelines:
The debate surrounding semantics has raged for years, but it is important that we adopt a more pragmatic, sensible approach to naming things in order to work more efficiently and effectively. Instead of focussing on ‘semantics’, look more closely at sensibility and longevity – choose names based on ease of maintenance, not for their perceived meaning.
Naming methodologies
Front-end development has undergone a revolution in recent years. As the projects we’ve worked on have grown larger and more important, our development practices have matured. The pros and cons of object-orientated approaches to CSS can be endlessly debated, yet their introduction has highlighted the usefulness of having documented naming schemes.
Jonathan Snook’s SMACSS (Scalable and Modular Architecture for CSS) collects style rules into five categories: base, layout, module, state and theme. This grouping makes it clear what each rule does, and is aided by a naming convention:
By separating rules into the five categories, naming convention is beneficial for immediately understanding which category a particular style belongs to and its role within the overall scope of the page. On large projects, it is more likely to have styles broken up across multiple files. In these cases, naming convention also makes it easier to find which file a style belongs to.
I like to use a prefix to differentiate between layout, state and module rules. For layout, I use l- but layout- would work just as well. Using prefixes like grid- also provide enough clarity to separate layout styles from other styles. For state rules, I like is- as in is-hidden or is-collapsed. This helps describe things in a very readable way.
SMACSS is more a set of suggestions than a rigid framework, so its ideas can be incorporated into your own practice. Nicholas Gallagher’s SUIT CSS project is far more strict in its naming conventions:
SUIT CSS relies on structured class names and meaningful hyphens (i.e., not using hyphens merely to separate words). This helps to work around the current limits of applying CSS to the DOM (i.e., the lack of style encapsulation), and to better communicate the relationships between classes.
Over the last year, I’ve favoured a BEM-inspired approach to CSS. BEM stands for block, element, modifier, which describes the three types of rule that contribute to the style of a single component. This means that, given the following markup:
<ul class=“sleigh”>
<li class=“sleigh__reindeer sleigh__reindeer––famous”>Rudolph</li>
<li class=“sleigh__reindeer”>Dasher</li>
<li class=“sleigh__reindeer”>Dancer</li>
<li class=“sleigh__reindeer”>Prancer</li>
<li class=“sleigh__reindeer”>Vixen</li>
<li class=“sleigh__reindeer”>Comet</li>
<li class=“sleigh__reindeer”>Cupid</li>
<li class=“sleigh__reindeer”>Dunder</li>
<li class=“sleigh__reindeer”>Blixem</li>
</ul>
I know that:
.sleigh is a containing block or component.
.sleigh__reindeer is used only as a descendent element of .sleigh.
.sleigh__reindeer––famous is used only as a modifier of .sleigh__reindeer.
With this naming scheme in place, I know which styles relate to a particular component, and which are shared. Beyond reducing specificity-related head-scratching, this approach has given me a framework within which I can consistently label items, and has sped up my workflow considerably.
Each of these methodologies shows that any robust CSS naming convention will have clear rules around case (lowercase, camelCase, PascalCase) and the use of special (allowed) characters like hyphens and underscores.
What makes for a good name?
Regardless of higher-level conventions, there’s no getting away from the fact that, at some point, we’re still going to have to name things. Recognising that classes should be named with other developers in mind, what makes for a good name?
Understandable
The most important aspect is for a name to be understandable. Words used in your project may come from a variety of sources: some may be widely understood, and others only be recognised by people working within a particular environment.
Culture
Most words you’ll choose will have common currency outside the world of web development, although they may have a particular interpretation among developers (think menu, list, input). However, words may have a narrower cultural significance; for example, in Germany and other German-speaking countries, impressum is the term used for legally mandated statements of ownership.
Industry
Industries often use specific terms to describe common business practices and concepts. Publishing has a number of these (headline, standfirst, masthead, colophon…) all have well understood meanings – and not all of them are relevant to online usage.
Organisation
Companies may have internal names (or nicknames) for their products and services. The Guardian is rife with such names: bisons (and buffalos), pixies (and super-pixies), bentos (and mini-bentos)… all of which mean something very different outside the organisation. Although such names can be useful inside smaller teams, in larger organisations they can become a barrier to entry, a sort of secret code used among employees who have been around long enough to know what they mean.
Product
Your team will undoubtedly have created names for specific features or interface components used in your product. For example, at Clearleft we coined the term gravigation for a navigation bar that was pinned to the bottom of the viewport. Elements of a visual design language may have names, too. Transport for London’s bar and circle logo is known internally as the roundel, while Nike’s logo is called the swoosh. Branding agencies often christen colours within a brand palette, too, either to evoke aspects of the identity or to indicate intended usage.
Once you recognise the origin of the words you use, you’ll be better able to judge their appropriateness. Using Latin words for class names may satisfy a need to use semantic-sounding terms but, unless you work in a company whose employees have a basic grasp of Latin, a degree of translation will be required. Military ranks might be a clever way of declaring sizes without implying actual values, but I’d venture most people outside the armed forces don’t know how they’re ordered.
Obvious
Quite often, the first name that comes into your head will be the best option. Names that obliquely reference the function of a class (e.g. receptacle instead of container, kevlar instead of no-bullets) only serve to add an additional layer of abstraction. Don’t overthink it!
One way of knowing if the names you use are well understood is to look at what similar concepts are called in existing vocabularies. schema.org, Dublin Core and the BBC’s ontologies are all useful sources for object names.
Functional
While we’ve learned to avoid using presentational classes, there remains a tension between naming things based on their content, and naming them for their intended presentation or behaviour (which may change at different breakpoints). Rather than think about a component’s appearance or behaviour, instead look to its function, its purpose. To clarify, ask what a component’s function is, and not how the component functions.
For example, the Guardian’s internal content system uses the following names for different types of image placement: supporting, showcase and thumbnail, with inline being the default. These options make no promise of the resulting position on a webpage (or smartphone app, or television screen…), but do suggest intended use, and therefore imply the likely presentation.
Consistent
Being consistent in your approach to names will allow for easier naming of successive components, and extending the vocabulary when necessary. For example, a predictably named hierarchy might use names like primary and secondary. Should another level need to be added, tertiary is clearly be preferred over third.
Appropriate
Your project will feature a mix of style rules. Some will perform utility functions (clearing floats, removing bullets from a list, reseting margins), while others will perform specific functions used only once or twice in a project. Names should reflect this. For commonly used classes, be generic; for unique components be more specific.
It’s also worth remembering that you can use multiple classes on an element, so combining both generic and specific can give you a powerful modular design system:
Generic: list
Specific: naughty-children
Combined: naughty-children list
If following the BEM methodology, you might use the following classes:
Generic: list
Specific: list––nice-children
Combined: list list––nice-children
Extensible
Good naming schemes can be extended. One way of achieving this is to use namespaces, which are basically a way of grouping related names under a higher-level term.
Microformats are a good example of a well-designed naming scheme, with many of its vocabularies taking property names from existing and related specifications (e.g. hCard is a 1:1 representation of vCard). Microformats 2 goes one step further by grouping properties under several namespaces:
h-* for root class names (e.g. h-card)
p-* for simple (text) properties (e.g. p-name)
u-* for URL properties (e.g. u-photo)
dt-* for date/time properties (e.g. dt-bday)
e-* for embedded markup properties (e.g. e-note)
The inclusion of namespaces is a massive improvement over the earlier specification, but the downside is that microformats now occupy five separate namespaces. This might be problematic if you are using u-* for your utility classes. While nothing will break, your naming system won’t be as robust, so plan accordingly.
(Note: Microformats perform a very specific function, separate from any presentational concerns. It’s therefore considered best practice to not use microformat classes as styling hooks, but instead use additional classes that relate to the function of the component and adhere to your own naming conventions.)
Short
Names should be as long as required, but no longer. When looking for words to describe a particular function, I try to look for single words where possible. Avoid abbreviations unless they are understood within the contexts described above. rrp is fine if labelling a recommended retail price in an online shop, but not very helpful if used to mean ragged-right paragraph, for example.
Fun!
Finally, names can be an opportunity to have some fun! Names can give character to a project, be it by providing an outlet for in-jokes or adding little easter eggs for those inclined to look.
The copyright statement on Apple’s website has long been named sosumi, a word that has a nice little history inside Apple. Until recently, the hamburger menu icon on the Guardian website was labelled honest-burger, after the developer’s favourite burger restaurant.
A few thoughts on preprocessors
CSS preprocessors have solved a lot of problems, but they have an unfortunate downside: they require you to name yet more things! Whereas we needed to worry only about style rules, now we need names for variables, mixins, functions… oh my!
A second article could be written about naming these, so for now I’ll offer just a few thoughts. The first is to note that preprocessors make it easier to change things, as they allow for DRYer code. So while the names of variables are important (and the advice in this article still very much applies), you can afford to relax a little.
Looking to name colour variables? If possible, find out if colours have been assigned names in a brand palette. If not, use obvious names (based on appearance or function, depending on your preference) and adapt as the palette grows. If it becomes difficult to name colours that are too similar, I’d venture that the problem lies with the design rather than the naming scheme.
The same is true for responsive breakpoints. Preprocessors allow you to move awkward naming conventions out of the markup and into the CSS. Although terms like mobile, tablet and desktop are not desirable given the need to think about device-agnostic design, if these terms are widely understood within a product team and among stakeholders, using them will ensure everyone is using the same language (they can always be changed later).
It still feels like we’re at the very beginning of understanding how preprocessors fit into a development workflow, if at all! I suspect over the next few years, best practices will emerge for all of these considerations. In the meantime, use your brain!
Even with sensible rules and conventions in place, naming things can remain difficult, but hopefully I’ve made this exercise a little less painful. Christmas is a time of giving, so to the developer reading your code in a year’s time, why not make your gift one of clearer class names. |
2014 |
Paul Lloyd |
paulrobertlloyd |
2014-12-21T00:00:00+00:00 |
https://24ways.org/2014/naming-things/ |
code |
| 37 |
JavaScript Modules the ES6 Way |
JavaScript admittedly has plenty of flaws, but one of the largest and most prominent is the lack of a module system: a way to split up your application into a series of smaller files that can depend on each other to function correctly.
This is something nearly all other languages come with out of the box, whether it be Ruby’s require, Python’s import, or any other language you’re familiar with. Even CSS has @import! JavaScript has nothing of that sort, and this has caused problems for application developers as they go from working with small websites to full client-side applications. Let’s be clear: it doesn’t mean the new module system in the upcoming version of JavaScript won’t be useful to you if you’re building smaller websites rather than the next Instagram.
Thankfully, the lack of a module system will soon be a problem of the past. The next version of JavaScript, ECMAScript 6, will bring with it a full-featured module and dependency management solution for JavaScript. The bad news is that it won’t be landing in browsers for a while yet – but the good news is that the specification for the module system and how it will look has been finalised. The even better news is that there are tools available to get it all working in browsers today without too much hassle. In this post I’d like to give you the gift of JS modules and show you the syntax, and how to use them in browsers today. It’s much simpler than you might think.
What is ES6?
ECMAScript is a scripting language that is standardised by a company called Ecma International. JavaScript is an implementation of ECMAScript. ECMAScript 6 is simply the next version of the ECMAScript standard and, hence, the next version of JavaScript. The spec aims to be fully comfirmed and complete by the end of 2014, with a target initial release date of June 2015. It’s impossible to know when we will have full feature support across the most popular browsers, but already some ES6 features are landing in the latest builds of Chrome and Firefox. You shouldn’t expect to be able to use the new features across browsers without some form of additional tooling or library for a while yet.
The ES6 module spec
The ES6 module spec was fully confirmed in July 2014, so all the syntax I will show you in this article is not expected to change. I’ll first show you the syntax and the new APIs being added to the language, and then look at how to use them today. There are two parts to the new module system. The first is the syntax for declaring modules and dependencies in your JS files, and the second is a programmatic API for loading in modules manually. The first is what most people are expected to use most of the time, so it’s what I’ll focus on more.
Module syntax
The key thing to understand here is that modules have two key components. First, they have dependencies. These are things that the module you are writing depends on to function correctly. For example, if you were building a carousel module that used jQuery, you would say that jQuery is a dependency of your carousel. You import these dependencies into your module, and we’ll see how to do that in a minute. Second, modules have exports. These are the functions or variables that your module exposes publicly to anything that imports it. Using jQuery as the example again, you could say that jQuery exports the $ function. Modules that depend on and hence import jQuery get access to the $ function, because jQuery exports it.
Another important thing to note is that when I discuss a module, all I really mean is a JavaScript file. There’s no extra syntax to use other than the new ES6 syntax. Once ES6 lands, modules and files will be analogous.
Named exports
Modules can export multiple objects, which can be either plain old variables or JavaScript functions. You denote something to be exported with the export keyword:
export function double(x) {
return x + x;
};
You can also store something in a variable then export it. If you do that, you have to wrap the variable in a set of curly braces.
var double = function(x) {
return x + x;
}
export { double };
A module can then import the double function like so:
import { double } from 'mymodule';
double(2); // 4
Again, curly braces are required around the variable you would like to import. It’s also important to note that from 'mymodule' will look for a file called mymodule.js in the same directory as the file you are requesting the import from. There is no need to add the .js extension.
The reason for those extra braces is that this syntax lets you export multiple variables:
var double = function(x) {
return x + x;
}
var square = function(x) {
return x * x;
}
export { double, square }
I personally prefer this syntax over the export function …, but only because it makes it much clearer to me what the module exports. Typically I will have my export {…} line at the bottom of the file, which means I can quickly look in one place to determine what the module is exporting.
A file importing both double and square can do so in just the way you’d expect:
import { double, square } from 'mymodule';
double(2); // 4
square(3); // 9
With this approach you can’t easily import an entire module and all its methods. This is by design – it’s much better and you’re encouraged to import just the functions you need to use.
Default exports
Along with named exports, the system also lets a module have a default export. This is useful when you are working with a large library such as jQuery, Underscore, Backbone and others, and just want to import the entire library. A module can define its default export (it can only ever have one default export) like so:
export default function(x) {
return x + x;
}
And that can be imported:
import double from 'mymodule';
double(2); // 4
This time you do not use the curly braces around the name of the object you are importing. Also notice how you can name the import whatever you’d like. Default exports are not named, so you can import them as anything you like:
import christmas from 'mymodule';
christmas(2); // 4
The above is entirely valid.
Although it’s not something that is used too often, a module can have both named exports and a default export, if you wish.
One of the design goals of the ES6 modules spec was to favour default exports. There are many reasons behind this, and there is a very detailed discussion on the ES Discuss site about it. That said, if you find yourself preferring named exports, that’s fine, and you shouldn’t change that to meet the preferences of those designing the spec.
Programmatic API
Along with the syntax above, there is also a new API being added to the language so you can programmatically import modules. It’s pretty rare you would use this, but one obvious example is loading a module conditionally based on some variable or property. You could easily import a polyfill, for example, if the user’s browser didn’t support a feature your app relied on. An example of doing this is:
if(someFeatureNotSupported) {
System.import('my-polyfill').then(function(myPolyFill) {
// use the module from here
});
}
System.import will return a promise, which, if you’re not familiar, you can read about in this excellent article on HTMl5 Rocks by Jake Archibald. A promise basically lets you attach callback functions that are run when the asynchronous operation (in this case, System.import), is complete.
This programmatic API opens up a lot of possibilities and will also provide hooks to allow you to register callbacks that will run at certain points in the lifetime of a module. Those hooks and that syntax are slightly less set in stone, but when they are confirmed they will provide really useful functionality. For example, you could write code that would run every module that you import through something like JSHint before importing it. In development that would provide you with an easy way to keep your code quality high without having to run a command line watch task.
How to use it today
It’s all well and good having this new syntax, but right now it won’t work in any browser – and it’s not likely to for a long time. Maybe in next year’s 24 ways there will be an article on how you can use ES6 modules with no extra work in the browser, but for now we’re stuck with a bit of extra work.
ES6 module transpiler
One solution is to use the ES6 module transpiler, a compiler that lets you write your JavaScript using the ES6 module syntax (actually a subset of it – not quite everything is supported, but the main features are) and have it compiled into either CommonJS-style code (CommonJS is the module specification that NodeJS and Browserify use), or into AMD-style code (the spec RequireJS uses). There are also plugins for all the popular build tools, including Grunt and Gulp.
The advantage of using this transpiler is that if you are already using a tool like RequireJS or Browserify, you can drop the transpiler in, start writing in ES6 and not worry about any additional work to make the code work in the browser, because you should already have that set up already. If you don’t have any system in place for handling modules in the browser, using the transpiler doesn’t really make sense. Remember, all this does is convert ES6 module code into CommonJS- or AMD-compliant JavaScript. It doesn’t do anything to help you get that code running in the browser, but if you have that part sorted it’s a really nice addition to your workflow. If you would like a tutorial on how to do this, I wrote a post back in June 2014 on using ES6 with the ES6 module transpiler.
SystemJS
Another solution is SystemJS. It’s the best solution in my opinion, particularly if you are starting a new project from scratch, or want to use ES6 modules on a project where you have no current module system in place. SystemJS is a spec-compliant universal module loader: it loads ES6 modules, AMD modules, CommonJS modules, as well as modules that just add a variable to the global scope (window, in the browser).
To load in ES6 files, SystemJS also depends on two other libraries: the ES6 module loader polyfill; and Traceur. Traceur is best accessed through the bower-traceur package, as the main repository doesn’t have an easy to find downloadable version. The ES6 module load polyfill implements System.import, and lets you load in files using it. Traceur is an ES6-to-ES5 module loader. It takes code written in ES6, the newest version of JavaScript, and transpiles it into ES5, the version of JavaScript widely implemented in browsers. The advantage of this is that you can play with the new features of the language today, even though they are not supported in browsers. The drawback is that you have to run all your files through Traceur every time you save them, but this is easily automated. Additionally, if you use SystemJS, the Traceur compilation is done automatically for you.
All you need to do to get SystemJS running is to add a <script> element to load SystemJS into your webpage. It will then automatically load the ES6 module loader and Traceur files when it needs them. In your HTML you then need to use System.import to load in your module:
<script>
System.import('./app');
</script>
When you load the page, app.js will be asynchronously loaded. Within app.js, you can now use ES6 modules. SystemJS will detect that the file is an ES6 file, automatically load Traceur, and compile the file into ES5 so that it works in the browser. It does all this dynamically in the browser, but there are tools to bundle your application in production, so it doesn’t make a lot of requests on the live site. In development though, it makes for a really nice workflow.
When working with SystemJS and modules in general, the best approach is to have a main module (in our case app.js) that is the main entry point for your application. app.js should then be responsible for loading all your application’s modules. This forces you to keep your application organised by only loading one file initially, and having the rest dealt with by that file.
SystemJS also provides a workflow for bundling your application together into one file.
Conclusion
ES6 modules may be at least six months to a year away (if not more) but that doesn’t mean they can’t be used today. Although there is an overhead to using them now – with the work required to set up SystemJS, the module transpiler, or another solution – that doesn’t mean it’s not worthwhile. Using any module system in the browser, whether that be RequireJS, Browserify or another alternative, requires extra tooling and libraries to support it, and I would argue that the effort to set up SystemJS is no greater than that required to configure any other tool. It also comes with the extra benefit that when the syntax is supported in browsers, you get a free upgrade. You’ll be able to remove SystemJS and have everything continue to work, backed by the native browser solution.
If you are starting a new project, I would strongly advocate using ES6 modules. It is a syntax and specification that is not going away at all, and will soon be supported in browsers. Investing time in learning it now will pay off hugely further down the road.
Further reading
If you’d like to delve further into ES6 modules (or ES6 generally) and using them today, I recommend the following resources:
ECMAScript 6 modules: the final syntax by Axel Rauschmayer
Practical Workflows for ES6 Modules by Guy Bedford
ECMAScript 6 resources for the curious JavaScripter by Addy Osmani
Tracking ES6 support by Addy Osmani
ES6 Tools List by Addy Osmani
Using Grunt and the ES6 Module Transpiler by Thomas Boyt
JavaScript Modules and Dependencies with jspm by myself
Using ES6 Modules Today by Guy Bedford |
2014 |
Jack Franklin |
jackfranklin |
2014-12-03T00:00:00+00:00 |
https://24ways.org/2014/javascript-modules-the-es6-way/ |
code |
| 38 |
Websites of Christmas Past, Present and Future |
The websites of Christmas past
The first website was created at CERN. It was launched on 20 December 1990 (just in time for Christmas!), and it still works today, after twenty-four years. Isn’t that incredible?!
Why does this website still work after all this time? I can think of a few reasons.
First, the authors of this document chose HTML. Of course they couldn’t have known back then the extent to which we would be creating documents in HTML, but HTML always had a lot going for it. It’s built on top of plain text, which means it can be opened in any text editor, and it’s pretty readable, even without any parsing.
Despite the fact that HTML has changed quite a lot over the past twenty-four years, extensions to the specification have always been implemented in a backwards-compatible manner. Reading through the 1992 W3C document HTML Tags, you’ll see just how it has evolved. We still have h1 – h6 elements, but I’d not heard of the <plaintext> element before. Despite being deprecated since HTML2, it still works in several browsers. You can see it in action on my website.
As well as being written in HTML, there is no run-time compilation of code; the first website simply consists of HTML files transmitted over the web. Due to its lack of complexity, it stood a good chance of surviving in the turbulent World Wide Web.
That’s all well and good for a simple, static website. But websites created today are increasingly interactive. Many require a login and provide experiences that are tailored to the individual user. This type of dynamic website requires code to be executed somewhere.
Traditionally, dynamic websites would execute such code on the server, and transmit a simple HTML file to the user. As far as the browser was concerned, this wasn’t much different from the first website, as the additional complexity all happened before the document was sent to the browser.
Doing it all in the browser
In 2003, the first single page interface was created at slashdotslash.com. A single page interface or single page app is a website where the page is created in the browser via JavaScript. The benefit of this technique is that, after the initial page load, subsequent interactions can happen instantly, or very quickly, as they all happen in the browser.
When software runs on the client rather than the server, it is often referred to as a fat client. This means that the bulk of the processing happens on the client rather than the server (which can now be thin).
A fat client is preferred over a thin client because:
It takes some processing requirements away from the server, thereby reducing the cost of servers (a thin server requires cheaper, or fewer servers).
They can often continue working offline, provided no server communication is required to complete tasks after initial load.
The latency of internet communications is bypassed after initial load, as interactions can appear near instantaneous when compared to waiting for a response from the server.
But there are also some big downsides, and these are often overlooked:
They can’t work without JavaScript. Obviously JavaScript is a requirement for any client-side code execution. And as the UK Government Digital Service discovered, 1.1% of their visitors did not receive JavaScript enhancements. Of that 1.1%, 81% had JavaScript enabled, but their browsers failed to execute it (possibly due to dropping the internet connection). If you care about 1.1% of your visitors, you should care about the non-JavaScript experience for your website.
The browser needs to do all the processing. This means that the hardware it runs on needs to be fast. It also means that we require all clients to have largely the same capabilities and browser APIs.
The initial payload is often much larger, and nothing will be rendered for the user until this payload has been fully downloaded and executed. If the connection drops at any point, or the code fails to execute owing to a bug, we’re left with the non-JavaScript experience.
They are not easily indexed as every crawler now needs to run JavaScript just to receive the content of the website.
These are not merely edge case issues to shirk off. The first three issues will affect some of your visitors; the fourth affects everyone, including you.
What problem are we trying to solve?
So what can be done to address these issues? Whereas fat clients solve some inherent issues with the web, they seem to create as many problems. When attempting to resolve any issue, it’s always good to try to uncover the original problem and work forwards from there. One of the best ways to frame a problem is as a user story. A user story considers the who, what and why of a need. Here’s a template:
As a {who} I want {what} so that {why}
I haven’t got a specific project in mind, so let’s refer to the who as user. Here’s one that could explain the use of thick clients.
As a user I want the site to respond to my actions quickly so that I get immediate feedback when I do something.
This user story could probably apply to a great number of websites, but so could this:
As a user I want to get to the content quickly, so that I don’t have to wait too long to find out what the site is all about or get the content I need.
A better solution
How can we balance both these user needs? How can we have a website that loads fast, and also reacts fast? The solution is to have a thick server, that serves the complete document, and then a thick client, that manages subsequent actions and replaces parts of the page. What we’re talking about here is simply progressive enhancement, but from the user’s perspective.
The initial payload contains the entire document. At this point, all interactions would happen in a traditional way using links or form elements. Then, once we’ve downloaded the JavaScript (asynchronously, after load) we can enhance the experience with JavaScript interactions. If for whatever reason our JavaScript fails to download or execute, it’s no biggie – we’ve already got a fully functioning website. If an API that we need isn’t available in this browser, it’s not a problem. We just fall back to the basic experience.
This second point, of having some minimum requirement for an enhanced experience, is often referred to as cutting the mustard, first used in this sense by the BBC News team. Essentially it’s an if statement like this:
if('querySelector' in document
&& 'localStorage' in window
&& 'addEventListener' in window) {
// bootstrap the JavaScript application
}
This code states that the browser must support the following methods before downloading and executing the JavaScript:
document.querySelector (can it find elements by CSS selectors)
window.localStorage (can it store strings)
window.addEventListener (can it bind to events in a standards-compliant way)
These three properties are what the BBC News team decided to test for, as they are present in their website’s JavaScript. Each website will have its own requirements. The last method, window.addEventListener is in interesting one. Although it’s simple to bind to events on IE8 and earlier, these browsers have very inconsistent support for standards. Making any JavaScript-heavy website work on IE8 and earlier is a painful exercise, and comes at a cost to all users on other browsers, as they’ll download unnecessary code to patch support for IE.
JavaScript API support by browser.
I discovered that IE8 supports 12% of the current JavaScript APIs, while IE9 supports 16%, and IE10 51%. It seems, then, that IE10 could be the earliest version of IE that I’d like to develop JavaScript for. That doesn’t mean that users on browsers earlier than 10 can’t use the website. On the contrary, they get the core experience, and because it’s just HTML and CSS, it’s much more likely to be bug-free, and could even provide a better experience than trying to run JavaScript in their browser. They receive the thin client experience.
By reducing the number of platforms that our enhanced JavaScript version supports, we can better focus our efforts on those platforms and offer an even greater experience to those users. But we can only do that if we use progressive enhancement. Otherwise our website would be completely broken for all other users.
So what we have is a thick server, capable of serving the entire website to our users, complete with all core functionality needed for our users to complete their tasks; and we have a thick client on supported browsers, which can bring an even greater experience to those users.
This is all transparent to users. They may notice that the website seems snappier on the new iPhone they received for Christmas than on the Windows 7 machine they got five years ago, but then they probably expected it to be faster on their iPhone anyway.
Isn’t this just more work?
It’s true that making a thick server and a thick client is more work than just making one or the other. But there are some big advantages:
The website works for everyone.
You can decide when users get the enhanced experience.
You can enhance features in an iterative (or agile) manner.
When the website breaks, it doesn’t break down.
The more you practise this approach, the quicker you will become.
The websites of Christmas present
The best way to discover websites using this technique of progressive enhancement is to disable JavaScript and see if the website breaks. I use the Web Developer extension, which is available for Chrome and Firefox. It lets me quickly disable JavaScript.
Web Developer extension.
24 ways works with and without JavaScript. Try using the menu icon to view the navigation. Without JavaScript, it’s a jump link to the bottom of the page, but with JavaScript, the menu slides in from the right.
24 ways navigation with JavaScript disabled.
24 ways navigation with working JavaScript.
Google search will also work without JavaScript. You won’t get instant search results or any prerendering, because those are enhancements.
For a more app-like example, try using Twitter. Without JavaScript, it still works, and looks nearly identical. But when you load JavaScript, links open in modal windows and all pages are navigated much quicker, as only the content that has changed is loaded. You can read about how they achieved this in Twitter’s blog posts Improving performance on twitter.com and Implementing pushState for twitter.com.
Unfortunately Facebook doesn’t use progressive enhancement, which not only means that the website doesn’t work without JavaScript, but it takes longer to load. I tested it on WebPagetest and if you compare the load times of Twitter and Facebook, you’ll notice that, despite putting similar content on the page, Facebook takes two and a half times longer to render the core content on the page.
Facebook takes two and a half times longer to load than Twitter.
Websites of Christmas yet to come
Every project is different, and making a website that enjoys a long life, or serves a larger number of users may or may not be a high priority. But I hope I’ve convinced you that it certainly is possible to look to the past and future simultaneously, and that there can be significant advantages to doing so. |
2014 |
Josh Emerson |
joshemerson |
2014-12-08T00:00:00+00:00 |
https://24ways.org/2014/websites-of-christmas-past-present-and-future/ |
code |
| 42 |
An Overview of SVG Sprite Creation Techniques |
SVG can be used as an icon system to replace icon fonts. The reasons why SVG makes for a superior icon system are numerous, but we won’t be going over them in this article. If you don’t use SVG icons and are interested in knowing why you may want to use them, I recommend you check out “Inline SVG vs Icon Fonts” by Chris Coyier – it covers the most important aspects of both systems and compares them with each other to help you make a better decision about which system to choose.
Once you’ve made the decision to use SVG instead of icon fonts, you’ll need to think of the best way to optimise the delivery of your icons, and ways to make the creation and use of icons faster.
Just like bitmaps, we can create image sprites with SVG – they don’t look or work exactly alike, but the basic concept is pretty much the same.
There are several ways to create SVG sprites, and this article will give you an overview of three of them. While we’re at it, we’re going to take a look at some of the available tools used to automate sprite creation and fallback for us.
Prerequisites
The content of this article assumes you are familiar with SVG. If you’ve never worked with SVG before, you may want to look at some of the introductory tutorials covering SVG syntax, structure and embedding techniques. I recommend the following:
SVG basics: Using SVG.
Structure: Structuring, Grouping, and Referencing in SVG — The <g>, <use>, <defs> and <symbol> Elements. We’ll mention <use> and <symbol> quite a bit in this article.
Embedding techniques: Styling and Animating SVGs with CSS. The article covers several topics, but the section linked focuses on embedding techniques.
A compendium of SVG resources compiled by Chris Coyier — contains resources to almost every aspect of SVG you might be interested in.
And if you’re completely new to the concept of spriting, Chris Coyier’s CSS Sprites explains all about them.
Another important SVG feature is the viewBox attribute. For some of the techniques, knowing your way around this attribute is not required, but it’s definitely more useful if you understand – even if just vaguely – how it works. The last technique mentioned in the article requires that you do know the attribute’s syntax and how to use it. To learn all about viewBox, you can refer to my blog post about SVG coordinate systems.
With the prerequisites in place, let’s move on to spriting SVGs!
Before you sprite…
In order to create an SVG sprite with your icons, you’ll of course need to have these icons ready for use.
Some spriting tools require that you place your icons in a folder to which a certain spriting process is to be applied. As such, for all of the upcoming sections we’ll work on the assumption that our SVG icons are placed in a folder named SVG.
Each icon is an individual .svg file.
You’ll need to make sure each icon is well-prepared and optimised for use – make sure you’ve cleaned up the code by running it through one of the optimisation tools or processes available (or doing it manually if it’s not tedious).
After prepping the icon files and placing them in a folder, we’re ready to create our SVG sprite.
HTML inline SVG sprites
Since SVG is XML code, it can be embedded inline in an HTML document as a code island using the <svg> element. Chris Coyier wrote about this technique first on CSS-Tricks.
The embedded SVG will serve as a container for our icons and is going to be the actual sprite we’re going to use. So we’ll start by including the SVG in our document.
<!DOCTYPE html>
<!-- HTML document stuff -->
<svg style="display:none;">
<!-- icons here -->
</svg>
<!-- other document stuff -->
</html>
Next, we’re going to place the icons inside the <svg>. Each icon will be wrapped in a <symbol> element we can then reference and use elsewhere in the page using the SVG <use> element. The <symbol> element has many benefits, and we’re using it because it allows us to define a symbol (which is a convenient markup for an icon) without rendering that symbol on the screen. The elements defined inside <symbol> will only be rendered when they are referenced – or called – by the <use> element.
Moreover, <symbol> can have its own viewBox attribute, which makes it possible to control the positioning of its content inside its container at any time.
Before we move on, I’d like to shed some light on the style="display:none;" part of the snippet above. Without setting the display of the SVG to none, and even though its contents are not rendered on the page, the SVG will still take up space in the page, resulting in a big empty area. In order to avoid that, we’re hiding the SVG entirely with CSS.
Now, suppose we have a Twitter icon in the icons folder. twitter.svg might look something like this:
<!-- twitter.svg -->
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg version="1.1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="32" height="32" viewBox="0 0 32 32">
<path d="M32 6.076c-1.177 0.522-2.443 0.875-3.771 1.034 1.355-0.813 2.396-2.099 2.887-3.632-1.269 0.752-2.674 1.299-4.169 1.593-1.198-1.276-2.904-2.073-4.792-2.073-3.626 0-6.565 2.939-6.565 6.565 0 0.515 0.058 1.016 0.17 1.496-5.456-0.274-10.294-2.888-13.532-6.86-0.565 0.97-0.889 2.097-0.889 3.301 0 2.278 1.159 4.287 2.921 5.465-1.076-0.034-2.088-0.329-2.974-0.821-0.001 0.027-0.001 0.055-0.001 0.083 0 3.181 2.263 5.834 5.266 6.437-0.551 0.15-1.131 0.23-1.73 0.23-0.423 0-0.834-0.041-1.235-0.118 0.835 2.608 3.26 4.506 6.133 4.559-2.247 1.761-5.078 2.81-8.154 2.81-0.53 0-1.052-0.031-1.566-0.092 2.905 1.863 6.356 2.95 10.064 2.95 12.076 0 18.679-10.004 18.679-18.68 0-0.285-0.006-0.568-0.019-0.849 1.283-0.926 2.396-2.082 3.276-3.398z" fill="#000000"></path>
</svg>
We don’t need the root svg element, so we’ll strip the code and only keep the parts that make up the Twitter icon’s shape, which in this example is just the <path> element.Let’s drop that into the sprite container like so:
<svg style="display:none;">
<symbol id="twitter-icon" viewBox="0 0 32 32">
<path d="M32 6.076c-1.177 …" fill="#000000"></path>
</symbol>
<!-- remaining icons here -->
<symbol id="instagram-icon" viewBox="0 0 32 32">
<!-- icon contents -->
</symbol>
<!-- etc. -->
</svg>
Repeat for the other icons.
The value of the <symbol> element’s viewBox attribute depends on the size of the SVG. You don’t need to know how the viewBox works to use it in this case. Its value is made up of four parts: the first two will almost always be “0 0”; the second two will be equal to the size of the icon. For example, our Twitter icon is 32px by 32px (see twitter.svg above), so the viewBox value is “0 0 32 32”.
That said, it is certainly useful to understand how the viewBox works – it can help you troubleshoot SVG sometimes and gives you better control over it, allowing you to scale, position and even crop SVGs manually without having to resort to an editor. My blog post explains all about the viewBox attribute and its related attributes.
Once you have your SVG sprite ready, you can display the icons anywhere on the page by referencing them using the SVG <use> element:
<svg class="twitter-icon">
<use xlink:href="#twitter-icon"></use>
<svg>
And that’s all there is to it!
HTML-inline SVG sprites are simple to create and use, but when you have a lot of icons (and the more icon sets you create) it can easily become daunting if you have to manually transfer the icons into the <svg>. Fortunately, you don’t have to do that. Fabrice Weinberg created a Grunt plugin called grunt-svgstore which takes the icons in your SVG folder and generates the SVG sprites for you; all you have to do is just drop the sprites into your page and use the icons like we did earlier.
This technique works in all browsers supporting SVG. There seems to be a bug in Safari on iOS which causes the icons not to show up when the SVG sprite is defined at the bottom of the document after the <use> references to the icons, so it’s safest to include the sprite before you use the icons until this bug is fixed.
This technique has one disadvantage: the SVG sprite cannot be cached. We’re saving an extra HTTP request here but the browser cannot cache the image, so we aren’t speeding up any subsequent page loads by inlining the SVG. There must be a better way – and there is.
Styling the icons is possible, but getting deep into the styles becomes a bit harder owing to the nature of the contents of the <use> element – these contents are cloned into a shadow DOM, and hence selecting elements in CSS the traditional way is not possible. However, some techniques to work around that do exist, and give us slightly more styling flexibility. Animations work as expected.
Referencing an external SVG sprite in HTML
Instead of including the SVG inline in the document, you can reference the sprite and the icons inside it externally, taking advantage of fragment identifiers to select individual icons in the sprite.
For example, the above reference to the Twitter icon would look something like this instead:
<svg class="twitter-icon">
<use xlink:href="path/to/icons.svg#twitter-icon"></use>
<svg>
icons.svg is the name of the SVG file that contains all of our icons as symbols, and the fragment identifier #twitter-icon is the reference to the <symbol> wrapping the Twitter icon’s contents. Very convenient, isn’t it? The browser will request the sprite and then cache it, speeding up subsequent page loads. Win!
This technique also works in all browsers supporting SVG except Internet Explorer – not even IE9+ with SVG support permits this technique. No version of IE supports referencing an external SVG in <use>.
Fortunately (again), Jonathan Neil has created a plugin called svg4everybody which fills this gap in IE; you can reference an external sprite in <use> and also provide fallback for browsers that do not support SVG. However, it requires you to have the fallback images (PNG or JPEG, for example) available to do so. For details, refer to the plugin’s Github repository’s readme file.
CSS inline SVG sprites
Another way to create an SVG sprite is by inlining the SVG icons in a style sheet using data URIs, and providing fallback for non-supporting browsers – also within the CSS.
Using this approach, we’re turning the style sheet into the sprite that includes our icons. The style sheet is normally cached by the browser, so we have that concern out of the way.
This technique is put into practice in Filament Group’s icon system approach, which uses their Grunticon plugin – or its sister Grumpicon web app – for generating the necessary CSS for the sprite. As such, we’re going to cover this technique by following a workflow that uses one of these tools.
Again, we start with our icon SVG files. To focus on the actual spriting method and not on the tooling, I’ll go over the process of sprite creation using the Grumpicon web app, instead of the Grunticon plugin. Both tools generate the same resources that we’re going to use for the icon system. Whether you choose the web app or the Grunt set-up, after processing your SVG folder you’re going to end up with the same set of resources that we’ll be using throughout this section.
The first step is to drop your icons into the Grumpicon web app.
Grumpicon homepage screenshot.
The application will then show you a preview of your icons, and a download button will allow you to download the generated files. These files will contain everything you need for your icon system – all that’s left is for you to drop the generated files and code into your project as recommended and you’ll have your sprite and icons ready to use anywhere you want in your page.
Grumpicon generates five files and one folder in the downloaded package: a png folder containing PNG versions of your icons; three style sheets (that we’ll go over briefly); a loader script file; and preview.html which is a live example showing you the other files in action.
The script in the loader goes into the <head> of your page. This script handles browser and feature detection, and requests the necessary style sheet depending on browser support for SVG and base64 data URIs. If you view the source code of the preview page, you can see exactly how the script is added.
icons.data.svg.css is the style sheet that contains your icons – the sprite. The icons are embedded inline inside the style sheet using data URIs, and applied to elements of your choice as background images, using class names. For example:
.twitter-icon{
background-image: url('data:image/svg+xml;…'); /* the ellipsis is where the icon’s data would go */
background-repeat: no-repeat;
background-position: 50% 50%;
height: 2em;
width: 2em;
/* etc. */
}
Then, you only have to apply the twitter-icon class name to an element in your HTML to apply the icon as a background to it:
<span class="twitter-icon"></span>
And that’s all you need to do to get an icon on the page.
icons.data.svg.css, along with the other two style sheets and the png folder should be added to your CSS folder.
icons.data.png.css is the style sheet the script will load in browsers that don’t support SVG, such as IE8. Fallback for the inline SVG is provided as a base64-encoded PNG. For instance, the fallback for the Twitter icon from our example would look like so:
.twitter-icon{
background-image: url('data:image/png;base64;…’);
/* etc. */
}
icons.fallback.css is the style sheet required for browsers that don’t support base64-encoded PNGs – the PNG images are loaded as usual using the image’s URL. The script will load this style sheet for IE6 and IE7, for example.
.twitter-icon{
background-image: url(png/twitter-icon.png);
/* etc. */
}
This technique is very different from the previous one. The sprite in this case is literally the style sheet, not an SVG container, and the icon usage is very similar to that of a CSS sprite – the icons are provided as background images.
This technique has advantages and disadvantages. For the sake of brevity, I won’t go into further details, but the main limitations worth mentioning are that SVGs embedded as background images cannot be styled with CSS; and animations are restricted to those defined inside the <svg> for each icon. CSS interactions (such as hover effects) don’t work either. Thus, to apply an effect for an icon that changes its color on hover, for example, you’ll need to export a set of SVGs for each colour in order for Grumpicon to create matching fallback PNG images that can then be used for the animation.
For more details about the Grumpicon workflow, I recommend you check out “A Designer’s Guide to Grumpicon” on Filament Group’s website.
Using SVG fragment identifiers and views
This spriting technique is, again, different from the previous ones, and it is my personal favourite.
SVG comes with a standard way of cropping to a specific area in a particular SVG image. If you’ve ever worked with CSS sprites before then this definitely sounds familiar: it’s almost exactly what we do with CSS sprites – the image containing all of the icons is cropped, so to speak, to show only the one icon that we want in the background positioning area of the element, using background size and positioning properties.
Instead of using background properties, we’ll be using SVG’s viewBox attribute to crop our SVG to the specific icon we want.
What I like about this technique is that it is more visual than the previous ones. Using this technique, the SVG sprite is treated like an actual image containing other images (the icons), instead of treating it as a piece of code containing other code.
Again, our SVG icons are placed inside a main SVG container that is going to be our SVG sprite. If you’re working in a graphics editor, position or arrange your icons inside the canvas any way you want them to be, and then export the graphic as is. Of course, the less empty space there is in your SVG, the better.
In our example, the sprite contains three icons as shown in the following image. The sprite is open in Sketch. Notice how the SVG is just big enough to fit the icons inside it. It doesn’t have to be like this, but it’s cleaner this way.
Screenshot showing the SVG sprite containing our icons.
Now, suppose you want to display only the Instagram icon. Using the SVG viewBox attribute, we can crop the SVG to the icon. The Instagram icon is positioned at 64px along the positive x-axis, and zero pixels along the y-axis. It is also 32px by 32px in size.
Screenshot showing the position (offset) of the Instagram icon inside the SVG sprite, and its size.
Using this information, we can specify the value of the viewBox as: 64 0 32 32. This area of the view box contains only the Instagram icon. 64 0 specifies the top-left corner of the view box area, and 32 32 specify its dimensions.
Now, if we were to change the viewBox value on the SVG sprite to this value, only the Instagram icon will be visible inside the SVG viewport. Great. But how do we use this information to display the icon in our page using our sprite?
SVG comes with a native way to link to portions or areas of an image using fragment identifiers. Fragment identifiers are used to link into a particular view area of an SVG document. Thus, using a fragment identifier and the boundaries of the area that we want (from the viewBox), we can link to that area and display it.
For example, if you want to display the icon from the sprite using an <img> tag, you can reference the icon in the sprite like so:
<img src='uiIcons.svg#svgView(viewBox(64, 0, 32, 32))' alt="Settings icon"/>
The fragment identifier in the snippet above (#svgView(viewBox(64, 0, 32, 32))) is the important part. This will result in only the Instagram icon’s area of the sprite being displayed.
There is also another way to do this, using the SVG <view> element. The <view> element can be used to define a view area and then reference that area somewhere else. For example, to define the view box containing the Instagram icon, we can do the following:
<view id='instagram-icon' viewBox='64 0 32 32' />
Then, we can reference this view in our <img> element like this:
<img src='sprite.svg#instagram-icon' alt="Instagram icon" />
The best part about this technique – besides the ability to reference an external SVG and hence make use of browser caching – is that it allows us to use practically any SVG embedding technique and does not restrict us to specific tags.
It goes without saying that this feature can be used for more than just icon systems, owing to viewBox’s power in controlling an SVG’s viewable area.
SVG fragment identifiers have decent browser support, but the technique is buggy in Safari: there is a bug that causes problems when loading a server SVG file and then using fragment identifiers with it. Bear Travis has documented the issue and a workaround.
Where to go from here
Pick the technique that works best for your project. Each technique has its own pros and cons, relating to convenience and maintainability, performance, and styling and scripting. Each technique also requires its own fallback mechanism.
The spriting techniques mentioned here are not the only techniques available. Other methods exist, such as SVG stacks, and others may surface in future, but these are the three main ones today.
The third technique using SVG’s built-in viewBox features is my favourite, and with better browser support and fewer (ideally, no) bugs, I believe it is more likely to become the standard way to create and use SVG sprites. Fallback techniques can be created, of course, in one of many possible ways.
Do you use SVG for your icon system? If so, which is your favourite technique? Do you know or have worked with other ways for creating SVG sprites? |
2014 |
Sara Soueidan |
sarasoueidan |
2014-12-16T00:00:00+00:00 |
https://24ways.org/2014/an-overview-of-svg-sprite-creation-techniques/ |
code |
| 46 |
Responsive Enhancement |
24 ways has been going strong for ten years. That’s an aeon in internet timescales. Just think of all the changes we’ve seen in that time: the rise of Ajax, the explosion of mobile devices, the unrecognisably changed landscape of front-end tooling.
Tools and technologies come and go, but one thing has remained constant for me over the past decade: progressive enhancement.
Progressive enhancement isn’t a technology. It’s more like a way of thinking. Instead of thinking about the specifics of how a finished website might look, progressive enhancement encourages you to think about the fundamental meaning of what the website is providing. So instead of thinking of a website in terms of its ideal state in a modern browser on a nice widescreen device, progressive enhancement allows you to think about the core functionality in a more abstract way.
Once you’ve figured out what the core functionality is – adding an item to a shopping cart, posting a message, sharing a photo – then you can enable that functionality in the simplest possible way. That usually means starting with good old-fashioned HTML. Links and forms are often all you need. Then, once you have the core functionality working in a basic way, you can start to enhance to make a progressively better experience for more modern browsers.
The advantage of working this way isn’t just that your site will work in older browsers (albeit in a rudimentary way). It also ensures that if anything goes wrong in a modern browser, it won’t be catastrophic.
There’s a common misconception that progressive enhancement means that you’ll spend your time dealing with older browsers, but in fact the opposite is true. Putting the basic functionality into place doesn’t take very long at all. And once you’ve done that, you’re free to spend all your time experimenting with the latest and greatest browser technologies, secure in the knowledge that even if they aren’t universally supported yet, that’s OK: you’ve already got your fallback in place.
The key to thinking about web development this way is realising that there isn’t one final interface – there could be many, slightly different interfaces depending on the properties and capabilities of any particular user agent at any particular moment. And that’s OK. Websites do not need to look the same in every browser.
Once you truly accept that, it’s an immensely liberating idea. Instead of spending your time trying to make websites look the same in wildly varying browsers, you can spend your time making sure that the core functionality of what you build works everywhere, while providing the best possible experience for more capable browsers.
Allow me to demonstrate with a simple example: navigation.
Step one: core functionality
Let’s say we have a straightforward website about the twelve days of Christmas, with a page for each day. The core functionality is pretty clear:
To read about any particular day.
To browse from day to day.
The first is easily satisfied by marking up the text with headings, paragraphs and all the usual structural HTML elements. The second is satisfied by providing a list of good ol’ hyperlinks.
Now where’s the best place to position this navigation list? Personally, I’m a big fan of the jump-to-footer pattern. This puts the content first and the navigation second. At the top of the page there’s a link with an href attribute pointing to the fragment identifier for the navigation.
<body>
<main role="main" id="top">
<a href="#menu" class="control">Menu</a>
...
</main>
<nav role="navigation" id="menu">
...
<a href="#top" class="control">Dismiss</a>
</nav>
</body>
See the footer-anchor pattern in action.
Because it’s nothing more than a hyperlink, this works in just about every browser since the dawn of the web. Following hyperlinks is what web browsers were made to do (hence the name).
Step two: layout as an enhancement
The footer-anchor pattern is a particularly neat solution on small-screen devices, like mobile phones. Once more screen real estate is available, I can use the magic of CSS to reposition the navigation above the content. I could use position: absolute, flexbox or, in this case, display: table.
@media all and (min-width: 35em) {
.control {
display: none;
}
body {
display: table;
}
[role="navigation"] {
display: table-caption;
columns: 6 15em;
}
}
See the styles for wider screens in action
Step three: enhance!
Right. At this point I’m providing core functionality to everyone, and I’ve got nice responsive styles for wider screens. I could stop here, but the real advantage of progressive enhancement is that I don’t have to. From here on, I can go crazy adding all sorts of fancy enhancements for modern browsers, without having to worry about providing a fallback for older browsers – the fallback is already in place.
What I’d really like is to provide a swish off-canvas pattern for small-screen devices. Here’s my plan:
Position the navigation under the main content.
Listen out for the .control links being activated and intercept that action.
When those links are activated, toggle a class of .active on the body.
If the .active class exists, slide the content out to reveal the navigation.
Here’s the CSS for positioning the content and navigation:
@media all and (max-width: 35em) {
[role="main"] {
transition: all .25s;
width: 100%;
position: absolute;
z-index: 2;
top: 0;
right: 0;
}
[role="navigation"] {
width: 75%;
position: absolute;
z-index: 1;
top: 0;
right: 0;
}
.active [role="main"] {
transform: translateX(-75%);
}
}
In my JavaScript, I’m going to listen out for any clicks on the .control links and toggle the .active class on the body accordingly:
(function (win, doc) {
'use strict';
var linkclass = 'control',
activeclass = 'active',
toggleClassName = function (element, toggleClass) {
var reg = new RegExp('(s|^)' + toggleClass + '(s|$)');
if (!element.className.match(reg)) {
element.className += ' ' + toggleClass;
} else {
element.className = element.className.replace(reg, '');
}
},
navListener = function (ev) {
ev = ev || win.event;
var target = ev.target || ev.srcElement;
if (target.className.indexOf(linkclass) !== -1) {
ev.preventDefault();
toggleClassName(doc.body, activeclass);
}
};
doc.addEventListener('click', navListener, false);
}(this, this.document));
I’m all set, right? Not so fast!
Cutting the mustard
I’ve made the assumption that addEventListener will be available in my JavaScript. That isn’t a safe assumption. That’s because JavaScript – unlike HTML or CSS – isn’t fault-tolerant. If you use an HTML element or attribute that a browser doesn’t understand, or if you use a CSS selector, property or value that a browser doesn’t understand, it’s no big deal. The browser will just ignore what it doesn’t understand: it won’t throw an error, and it won’t stop parsing the file.
JavaScript is different. If you make an error in your JavaScript, or use a JavaScript method or property that a browser doesn’t recognise, that browser will throw an error, and it will stop parsing the file. That’s why it’s important to test for features before using them in JavaScript. That’s also why it isn’t safe to rely on JavaScript for core functionality.
In my case, I need to test for the existence of addEventListener:
(function (win, doc) {
if (!win.addEventListener) {
return;
}
...
}(this, this.document));
The good folk over at the BBC call this kind of feature test cutting the mustard. If a browser passes the test, it cuts the mustard, and so it gets the enhancements. If a browser doesn’t cut the mustard, it doesn’t get the enhancements. And that’s fine because, remember, websites don’t need to look the same in every browser.
I want to make sure that my off-canvas styles are only going to apply to mustard-cutting browsers. I’m going to use JavaScript to add a class of .cutsthemustard to the document:
(function (win, doc) {
if (!win.addEventListener) {
return;
}
...
var enhanceclass = 'cutsthemustard';
doc.documentElement.className += ' ' + enhanceclass;
}(this, this.document));
Now I can use the existence of that class name to adjust my CSS:
@media all and (max-width: 35em) {
.cutsthemustard [role="main"] {
transition: all .25s;
width: 100%;
position: absolute;
z-index: 2;
top: 0;
right: 0;
}
.cutsthemustard [role="navigation"] {
width: 75%;
position: absolute;
z-index: 1;
top: 0;
right: 0;
}
.cutsthemustard .active [role="main"] {
transform: translateX(-75%);
}
}
See the enhanced mustard-cutting off-canvas navigation. Remember, this only applies to small screens so you might have to squish your browser window.
Enhance all the things!
This was a relatively simple example, but it illustrates the thinking behind progressive enhancement: once you’re providing the core functionality to everyone, you’re free to go crazy with all the latest enhancements for modern browsers.
Progressive enhancement doesn’t mean you have to provide all the same functionality to everyone – quite the opposite. That’s why it’s key to figure out early on what the core functionality is, and make sure that it can be provided with the most basic technology. But from that point on, you’re free to add many more features that aren’t mission-critical. You should reward more capable browsers by giving them more of those features, such as animation in CSS, geolocation in JavaScript, and new input types in HTML.
Like I said, progressive enhancement isn’t a technology. It’s a way of thinking. Once you start thinking this way, you’ll be prepared for whatever the next ten years throws at us. |
2014 |
Jeremy Keith |
jeremykeith |
2014-12-09T00:00:00+00:00 |
https://24ways.org/2014/responsive-enhancement/ |
code |
| 49 |
Universal React |
One of the libraries to receive a huge amount of focus in 2015 has been ReactJS, a library created by Facebook for building user interfaces and web applications.
More generally we’ve seen an even greater rise in the number of applications built primarily on the client side with most of the logic implemented in JavaScript. One of the main issues with building an app in this way is that you immediately forgo any customers who might browse with JavaScript turned off, and you can also miss out on any robots that might visit your site to crawl it (such as Google’s search bots). Additionally, we gain a performance improvement by being able to render from the server rather than having to wait for all the JavaScript to be loaded and executed.
The good news is that this problem has been recognised and it is possible to build a fully featured client-side application that can be rendered on the server. The way in which these apps work is as follows:
The user visits www.yoursite.com and the server executes your JavaScript to generate the HTML it needs to render the page.
In the background, the client-side JavaScript is executed and takes over the duty of rendering the page.
The next time a user clicks, rather than being sent to the server, the client-side app is in control.
If the user doesn’t have JavaScript enabled, each click on a link goes to the server and they get the server-rendered content again.
This means you can still provide a very quick and snappy experience for JavaScript users without having to abandon your non-JS users. We achieve this by writing JavaScript that can be executed on the server or on the client (you might have heard this referred to as isomorphic) and using a JavaScript framework that’s clever enough handle server- or client-side execution. Currently, ReactJS is leading the way here, although Ember and Angular are both working on solutions to this problem.
It’s worth noting that this tutorial assumes some familiarity with React in general, its syntax and concepts. If you’d like a refresher, the ReactJS docs are a good place to start.
Getting started
We’re going to create a tiny ReactJS application that will work on the server and the client. First we’ll need to create a new project and install some dependencies. In a new, blank directory, run:
npm init -y
npm install --save ejs express react react-router react-dom
That will create a new project and install our dependencies:
ejs is a templating engine that we’ll use to render our HTML on the server.
express is a small web framework we’ll run our server on.
react-router is a popular routing solution for React so our app can fully support and respect URLs.
react-dom is a small React library used for rendering React components.
We’re also going to write all our code in ECMAScript 6, and therefore need to install BabelJS and configure that too.
npm install --save-dev babel-cli babel-preset-es2015 babel-preset-react
Then, create a .babelrc file that contains the following:
{
"presets": ["es2015", "react"]
}
What we’ve done here is install Babel’s command line interface (CLI) tool and configured it to transform our code from ECMAScript 6 (or ES2015) to ECMAScript 5, which is more widely supported. We’ll need the React transforms when we start writing JSX when working with React.
Creating a server
For now, our ExpressJS server is pretty straightforward. All we’ll do is render a view that says ‘Hello World’. Here’s our server code:
import express from 'express';
import http from 'http';
const app = express();
app.use(express.static('public'));
app.set('view engine', 'ejs');
app.get('*', (req, res) => {
res.render('index');
});
const server = http.createServer(app);
server.listen(3003);
server.on('listening', () => {
console.log('Listening on 3003');
});
Here we’re using ES6 modules, which I wrote about on 24 ways last year, if you’d like a reminder. We tell the app to render the index view on any GET request (that’s what app.get('*') means, the wildcard matches any route).
We now need to create the index view file, which Express expects to be defined in views/index.ejs:
<!DOCTYPE html>
<html>
<head>
<title>My App</title>
</head>
<body>
Hello World
</body>
</html>
Finally, we’re ready to run the server. Because we installed babel-cli earlier we have access to the babel-node executable, which will transform all your code before running it through node. Run this command:
./node_modules/.bin/babel-node server.js
And you should now be able to visit http://localhost:3003 and see ‘Hello World’ right there:
Building the React app
Now we’ll build the React application entirely on the server, before adding the client-side JavaScript right at the end. Our app will have two routes, / and /about which will both show a small amount of content. This will demonstrate how to use React Router on the server side to make sure our React app plays nicely with URLs.
Firstly, let’s update views/index.ejs. Our server will figure out what HTML it needs to render, and pass that into the view. We can pass a value into our view when we render it, and then use EJS syntax to tell it to output that data. Update the template file so the body looks like so:
<body>
<%- markup %>
</body>
Next, we’ll define the routes we want our app to have using React Router. For now we’ll just define the index route, and not worry about the /about route quite yet. We could define our routes in JSX, but I think for server-side rendering it’s clearer to define them as an object. Here’s what we’re starting with:
const routes = {
path: '',
component: AppComponent,
childRoutes: [
{
path: '/',
component: IndexComponent
}
]
}
These are just placed at the top of server.js, after the import statements. Later we’ll move these into a separate file, but for now they are fine where they are.
Notice how I define first that the AppComponent should be used at the '' path, which effectively means it matches every single route and becomes a container for all our other components. Then I give it a child route of /, which will match the IndexComponent. Before we hook these routes up with our server, let’s quickly define components/app.js and components/index.js. app.js looks like so:
import React from 'react';
export default class AppComponent extends React.Component {
render() {
return (
<div>
<h2>Welcome to my App</h2>
{ this.props.children }
</div>
);
}
}
When a React Router route has child components, they are given to us in the props under the children key, so we need to include them in the code we want to render for this component. The index.js component is pretty bland:
import React from 'react';
export default class IndexComponent extends React.Component {
render() {
return (
<div>
<p>This is the index page</p>
</div>
);
}
}
Server-side routing with React Router
Head back into server.js, and firstly we’ll need to add some new imports:
import React from 'react';
import { renderToString } from 'react-dom/server';
import { match, RoutingContext } from 'react-router';
import AppComponent from './components/app';
import IndexComponent from './components/index';
The ReactDOM package provides react-dom/server which includes a renderToString method that takes a React component and produces the HTML string output of the component. It’s this method that we’ll use to render the HTML from the server, generated by React. From the React Router package we use match, a function used to find a matching route for a URL; and RoutingContext, a React component provided by React Router that we’ll need to render. This wraps up our components and provides some functionality that ties React Router together with our app. Generally you don’t need to concern yourself about how this component works, so don’t worry too much.
Now for the good bit: we can update our app.get('*') route with the code that matches the URL against the React routes:
app.get('*', (req, res) => {
// routes is our object of React routes defined above
match({ routes, location: req.url }, (err, redirectLocation, props) => {
if (err) {
// something went badly wrong, so 500 with a message
res.status(500).send(err.message);
} else if (redirectLocation) {
// we matched a ReactRouter redirect, so redirect from the server
res.redirect(302, redirectLocation.pathname + redirectLocation.search);
} else if (props) {
// if we got props, that means we found a valid component to render
// for the given route
const markup = renderToString(<RoutingContext {...props} />);
// render `index.ejs`, but pass in the markup we want it to display
res.render('index', { markup })
} else {
// no route match, so 404. In a real app you might render a custom
// 404 view here
res.sendStatus(404);
}
});
});
We call match, giving it the routes object we defined earlier and req.url, which contains the URL of the request. It calls a callback function we give it, with err, redirectLocation and props as the arguments. The first two conditionals in the callback function just deal with an error occuring or a redirect (React Router has built in redirect support). The most interesting bit is the third conditional, else if (props). If we got given props and we’ve made it this far it means we found a matching component to render and we can use this code to render it:
...
} else if (props) {
// if we got props, that means we found a valid component to render
// for the given route
const markup = renderToString(<RoutingContext {...props} />);
// render `index.ejs`, but pass in the markup we want it to display
res.render('index', { markup })
} else {
...
}
The renderToString method from ReactDOM takes that RoutingContext component we mentioned earlier and renders it with the properties required. Again, you need not concern yourself with what this specific component does or what the props are. Most of this is data that React Router provides for us on top of our components.
Note the {...props}, which is a neat bit of JSX syntax that spreads out our object into key value properties. To see this better, note the two pieces of JSX code below, both of which are equivalent:
<MyComponent a="foo" b="bar" />
// OR:
const props = { a: "foo", b: "bar" };
<MyComponent {...props} />
Running the server again
I know that felt like a lot of work, but the good news is that once you’ve set this up you are free to focus on building your React components, safe in the knowledge that your server-side rendering is working. To check, restart the server and head to http://localhost:3003 once more. You should see it all working!
Refactoring and one more route
Before we move on to getting this code running on the client, let’s add one more route and do some tidying up. First, move our routes object out into routes.js:
import AppComponent from './components/app';
import IndexComponent from './components/index';
const routes = {
path: '',
component: AppComponent,
childRoutes: [
{
path: '/',
component: IndexComponent
}
]
}
export { routes };
And then update server.js. You can remove the two component imports and replace them with:
import { routes } from './routes';
Finally, let’s add one more route for ./about and links between them. Create components/about.js:
import React from 'react';
export default class AboutComponent extends React.Component {
render() {
return (
<div>
<p>A little bit about me.</p>
</div>
);
}
}
And then you can add it to routes.js too:
import AppComponent from './components/app';
import IndexComponent from './components/index';
import AboutComponent from './components/about';
const routes = {
path: '',
component: AppComponent,
childRoutes: [
{
path: '/',
component: IndexComponent
},
{
path: '/about',
component: AboutComponent
}
]
}
export { routes };
If you now restart the server and head to http://localhost:3003/about` you’ll see the about page!
For the finishing touch we’ll use the React Router link component to add some links between the pages. Edit components/app.js to look like so:
import React from 'react';
import { Link } from 'react-router';
export default class AppComponent extends React.Component {
render() {
return (
<div>
<h2>Welcome to my App</h2>
<ul>
<li><Link to='/'>Home</Link></li>
<li><Link to='/about'>About</Link></li>
</ul>
{ this.props.children }
</div>
);
}
}
You can now click between the pages to navigate. However, everytime we do so the requests hit the server. Now we’re going to make our final change, such that after the app has been rendered on the server once, it gets rendered and managed in the client, providing that snappy client-side app experience.
Client-side rendering
First, we’re going to make a small change to views/index.ejs. React doesn’t like rendering directly into the body and will give a warning when you do so. To prevent this we’ll wrap our app in a div:
<body>
<div id="app"><%- markup %></div>
<script src="build.js"></script>
</body>
I’ve also added in a script tag to build.js, which is the file we’ll generate containing all our client-side code.
Next, create client-render.js. This is going to be the only bit of JavaScript that’s exclusive to the client side. In it we need to pull in our routes and render them to the DOM.
import React from 'react';
import ReactDOM from 'react-dom';
import { Router } from 'react-router';
import { routes } from './routes';
import createBrowserHistory from 'history/lib/createBrowserHistory';
ReactDOM.render(
<Router routes={routes} history={createBrowserHistory()} />,
document.getElementById('app')
)
The first thing you might notice is the mention of createBrowserHistory. React Router is built on top of the history module, a module that listens to the browser’s address bar and parses the new location. It has many modes of operation: it can keep track using a hashbang, such as http://localhost/#!/about (this is the default), or you can tell it to use the HTML5 history API by calling createBrowserHistory, which is what we’ve done. This will keep the URLs nice and neat and make sure the client and the server are using the same URL structure. You can read more about React Router and histories in the React Router documentation.
Finally we use ReactDOM.render and give it the Router component, telling it about all our routes, and also tell ReactDOM where to render, the #app element.
Generating build.js
We’re actually almost there! The final thing we need to do is generate our client side bundle. For this we’re going to use webpack, a module bundler that can take our application, follow all the imports and generate one large bundle from them. We’ll install it and babel-loader, a webpack plugin for transforming code through Babel.
npm install --save-dev webpack babel-loader
To run webpack we just need to create a configuration file, called webpack.config.js. Create the file in the root of our application and add the following code:
var path = require('path');
module.exports = {
entry: path.join(process.cwd(), 'client-render.js'),
output: {
path: './public/',
filename: 'build.js'
},
module: {
loaders: [
{
test: /.js$/,
loader: 'babel'
}
]
}
}
Note first that this file can’t be written in ES6 as it doesn’t get transformed. The first thing we do is tell webpack the main entry point for our application, which is client-render.js. We use process.cwd() because webpack expects an exact location – if we just gave it the string ‘client-render.js’, webpack wouldn’t be able to find it.
Next, we tell webpack where to output our file, and here I’m telling it to place the file in public/build.js. Finally we tell webpack that every time it hits a file that ends in .js, it should use the babel-loader plugin to transform the code first.
Now we’re ready to generate the bundle!
./node_modules/.bin/webpack
This will take a fair few seconds to run (on my machine it’s about seven or eight), but once it has it will have created public/build.js, a client-side bundle of our application. If you restart your server once more you’ll see that we can now navigate around our application without hitting the server, because React on the client takes over. Perfect!
The first bundle that webpack generates is pretty slow, but if you run webpack -w it will go into watch mode, where it watches files for changes and regenerates the bundle. The key thing is that it only regenerates the small pieces of the bundle it needs, so while the first bundle is very slow, the rest are lightning fast. I recommend leaving webpack constantly running in watch mode when you’re developing.
Conclusions
First, if you’d like to look through this code yourself you can find it all on GitHub. Feel free to raise an issue there or tweet me if you have any problems or would like to ask further questions.
Next, I want to stress that you shouldn’t use this as an excuse to build all your apps in this way. Some of you might be wondering whether a static site like the one we built today is worth its complexity, and you’d be right. I used it as it’s an easy example to work with but in the future you should carefully consider your reasons for wanting to build a universal React application and make sure it’s a suitable infrastructure for you.
With that, all that’s left for me to do is wish you a very merry Christmas and best of luck with your React applications! |
2015 |
Jack Franklin |
jackfranklin |
2015-12-05T00:00:00+00:00 |
https://24ways.org/2015/universal-react/ |
code |
| 52 |
Git Rebasing: An Elfin Workshop Workflow |
This year Santa’s helpers have been tasked with making a garland. It’s a pretty simple task: string beads onto yarn in a specific order. When the garland reaches a specific length, add it to the main workshop garland. Each elf has a specific sequence they’re supposed to chain, which is given to them via a work order. (This is starting to sound like one of those horrible calculus problems. I promise it isn’t. It’s worse; it’s about Git.)
For the most part, the system works really well. The elves are able to quickly build up a shared chain because each elf specialises on their own bit of garland, and then links the garland together. Because of this they’re able to work independently, but towards the common goal of making a beautiful garland.
At first the elves are really careful with each bead they put onto the garland. They check with one another before merging their work, and review each new link carefully. As time crunches on, the elves pour a little more cheer into the eggnog cooler, and the quality of work starts to degrade. Tensions rise as mistakes are made and unkind words are said. The elves quickly realise they’re going to need a system to change the beads out when mistakes are made in the chain.
The first common mistake is not looking to see what the latest chain is that’s been added to the main garland. The garland is huge, and it sits on a roll in one of the corners of the workshop. It’s a big workshop, so it is incredibly impractical to walk all the way to the roll to check what the last link is on the chain. The elves, being magical, have set up a monitoring system that allows them to keep a local copy of the main garland at their workstation. It’s an imperfect system though, so the elves have to request a manual refresh to see the latest copy. They can request a new copy by running the command
git pull --rebase=preserve
(They found that if they ran git pull on its own, they ended up with weird loops of extra beads off the main garland, so they’ve opted to use this method.) This keeps the shared garland up to date, which makes things a lot easier. A visualisation of the rebase process is available.
The next thing the elves noticed is that if they worked on the main workshop garland, they were always running into problems when they tried to share their work back with the rest of the workshop. It was fine if they were working late at night by themselves, but in the middle of the day, it was horrible. (I’ve been asked not to talk about that time the fight broke out.) Instead of trying to share everything on their local copy of the main garland, the elves have realised it’s a lot easier to work on a new string and then knot this onto the main garland when their pattern repeat is finished. They generate a new string by issuing the following commands:
git checkout master
git checkout -b 1234_pattern-name
1234 represents the work order number and pattern-name describes the pattern they’re adding. Each bead is then added to the new link (git add bead.txt) and locked into place (git commit). Each elf repeats this process until the sequence of beads described in the work order has been added to their mini garland.
To combine their work with the main garland, the elves need to make a few decisions. If they’re making a single strand, they issue the following commands:
git checkout master
git merge --ff-only 1234_pattern-name
To share their work they publish the new version of the main garland to the workshop spool with the command git push origin master.
Sometimes this fails. Sharing work fails because the workshop spool has gotten new links added since the elf last updated their copy of the main workshop spool. This makes the elves both happy and sad. It makes them happy because it means the other elves have been working too, but it makes them sad because they now need to do a bit of extra work to close their work order.
To update the local copy of the workshop spool, the elf first unlinks the chain they just linked by running the command:
git reset --merge ORIG_HEAD
This works because the garland magic notices when the elves are doing a particularly dangerous thing and places a temporary, invisible bookmark to the last safe bead in the chain before the dangerous thing happened. The garland no longer has the elf’s work, and can be updated safely. The elf runs the command git pull --rebase=preserve and the changes all the other elves have made are applied locally.
With these new beads in place, the elf now has to restring their own chain so that it starts at the right place. To do this, the elf turns back to their own chain (git checkout 1234_pattern-name) and runs the command git rebase master. Assuming their bead pattern is completely unique, the process will run and the elf’s beads will be restrung on the tip of the main workshop garland.
Sometimes the magic fails and the elf has to deal with merge conflicts. These are kind of annoying, so the elf uses a special inspector tool to figure things out. The elf opens the inspector by running the command git mergetool to work through places where their beads have been added at the same points as another elf’s beads. Once all the conflicts are resolved, the elf saves their work, and quits the inspector. They might need to do this a few times if there are a lot of new beads, so the elf has learned to follow this update process regularly instead of just waiting until they’re ready to close out their work order.
Once their link is up to date, the elf can now reapply their chain as before, publish their work to the main workshop garland, and close their work order:
git checkout master
git merge --ff-only 1234_pattern-name
git push origin master
Generally this process works well for the elves. Sometimes, though, when they’re tired or bored or a little drunk on festive cheer, they realise there’s a mistake in their chain of beads. Fortunately they can fix the beads without anyone else knowing. These tools can be applied to the whole workshop chain as well, but it causes problems because the magic assumes that elves are only ever adding to the main chain, not removing or reordering beads on the fly. Depending on where the mistake is, the elf has a few different options.
Let’s pretend the elf has a sequence of five beads she’s been working on. The work order says the pattern should be red-blue-red-blue-red.
If the sequence of beads is wrong (for example, blue-blue-red-red-red), the elf can remove the beads from the chain, but keep the beads in her workstation using the command git reset --soft HEAD~5.
If she’s been using the wrong colours and the wrong pattern (for example, green-green-yellow-yellow-green), she can remove the beads from her chain and discard them from her workstation using the command git reset --hard HEAD~5.
If one of the beads is missing (for example, red-blue-blue-red), she can restring the beads using the first method, or she can use a bit of magic to add the missing bead into the sequence.
Using a tool that’s a bit like orthoscopic surgery, she first selects a sequence of beads which contains the problem. A visualisation of this process is available.
Start the garland surgery process with the command:
git rebase --interactive HEAD~4
A new screen comes up with the following information (the oldest bead is on top):
pick c2e4877 Red bead
pick 9b5555e Blue bead
pick 7afd66b Blue bead
pick e1f2537 Red bead
The elf adjusts the list, changing “pick” to “edit” next to the first blue bead:
pick c2e4877 Red bead
edit 9b5555e Blue bead
pick 7afd66b Blue bead
pick e1f2537 Red bead
She then saves her work and quits the editor. The garland magic has placed her back in time at the moment just after she added the first blue bead.
She needs to manually fix up her garland to add the new red bead. If the beads were files, she might run commands like vim beads.txt and edit the file to make the necessary changes.
Once she’s finished her changes, she needs to add her new bead to the garland (git add --all) and lock it into place (git commit). This time she assigns the commit message “Red bead – added” so she can easily find it.
The garland magic has replaced the bead, but she still needs to verify the remaining beads on the garland. This is a mostly automatic process which is started by running the command git rebase --continue.
The new red bead has been assigned a position formerly held by the blue bead, and so the elf must deal with a merge conflict. She opens up a new program to help resolve the conflict by running git mergetool.
She knows she wants both of these beads in place, so the elf edits the file to include both the red and blue beads.
With the conflict resolved, the elf saves her changes and quits the mergetool.
Back at the command line, the elf checks the status of her work using the command git status.
rebase in progress; onto 4a9cb9d
You are currently rebasing branch '2_RBRBR' on '4a9cb9d'.
(all conflicts fixed: run "git rebase --continue")
Changes to be committed:
(use "git reset HEAD <file>..." to unstage)
modified: beads.txt
Untracked files:
(use "git add <file>..." to include in what will be committed)
beads.txt.orig
She removes the file added by the mergetool with the command rm beads.txt.orig and commits the edits she just made to the bead file using the commands:
git add beads.txt
git commit --message "Blue bead -- resolved conflict"
With the conflict resolved, the elf is able to continue with the rebasing process using the command git rebase --continue. There is one final conflict the elf needs to resolve. Once again, she opens up the visualisation tool and takes a look at the two conflicting files.
She incorporates the changes from the left and right column to ensure her bead sequence is correct.
Once the merge conflict is resolved, the elf saves the file and quits the mergetool. Once again, she cleans out the backup file added by the mergetool (rm beads.txt.orig) and commits her changes to the garland:
git add beads.txt
git commit --message "Red bead -- resolved conflict"
and then runs the final verification steps in the rebase process (git rebase --continue).
The verification process runs through to the end, and the elf checks her work using the command git log --oneline.
9269914 Red bead -- resolved conflict
4916353 Blue bead -- resolved conflict
aef0d5c Red bead -- added
9b5555e Blue bead
c2e4877 Red bead
She knows she needs to read the sequence from bottom to top (the oldest bead is on the bottom). Reviewing the list she sees that the sequence is now correct.
Sometimes, late at night, the elf makes new copies of the workshop garland so she can play around with the bead sequencer just to see what happens. It’s made her more confident at restringing beads when she’s found real mistakes. And she doesn’t mind helping her fellow elves when they run into trouble with their beads. The sugar cookies they leave her as thanks don’t hurt either. If you would also like to play with the bead sequencer, you can get a copy of the branches the elf worked.
Our lessons from the workshop:
By using rebase to update your branches, you avoid merge commits and keep a clean commit history.
If you make a mistake on one of your local branches, you can use reset to take commits off your branch. If you want to save the work, but uncommit it, add the parameter --soft. If you want to completely discard the work, use the parameter, --hard.
If you have merged working branch changes to the local copy of your master branch and it is preventing you from pushing your work to a remote repository, remove these changes using the command reset with the parameter --merge ORIG_HEAD before updating your local copy of the remote master branch.
If you want to make a change to work that was committed a little while ago, you can use the command rebase with the parameter --interactive. You will need to include how many commits back in time you want to review. |
2015 |
Emma Jane Westby |
emmajanewestby |
2015-12-07T00:00:00+00:00 |
https://24ways.org/2015/git-rebasing/ |
code |
| 54 |
Putting My Patterns through Their Paces |
Over the last few years, the conversation around responsive design has shifted subtly, focusing not on designing pages, but on patterns: understanding the small, reusable elements that comprise a larger design system. And given that many of those patterns are themselves responsive, learning to manage these small layout systems has become a big part of my work.
The thing is, the more pattern-driven work I do, the more I realize my design process has changed in a number of subtle, important ways. I suppose you might even say that pattern-driven design has, in a few ways, redesigned me.
Meet the Teaser
Here’s a recent example. A few months ago, some friends and I redesigned The Toast. (It was a really, really fun project, and we learned a lot.) Each page of the site is, as you might guess, stitched together from a host of tiny, reusable patterns. Some of them, like the search form and footer, are fairly unique, and used once per page; others are used more liberally, and built for reuse. The most prevalent example of these more generic patterns is the teaser, which is classed as, uh, .teaser. (Look, I never said I was especially clever.)
In its simplest form, a teaser contains a headline, which links to an article:
Fairly straightforward, sure. But it’s just the foundation: from there, teasers can have a byline, a description, a thumbnail, and a comment count. In other words, we have a basic building block (.teaser) that contains a few discrete content types – some required, some not. In fact, very few of those pieces need to be present; to qualify as a teaser, all we really need is a link and a headline. But by adding more elements, we can build slight variations of our teaser, and make it much, much more versatile.
Nearly every element visible on this page is built out of our generic “teaser” pattern.
But the teaser variation I’d like to call out is the one that appears on The Toast’s homepage, on search results or on section fronts. In the main content area, each teaser in the list features larger images, as well as an interesting visual treatment: the byline and comment count were the most prominent elements within each teaser, appearing above the headline.
The approved visual design of our teaser, as it appears on lists on the homepage and the section fronts.
And this is, as it happens, the teaser variation that gave me pause. Back in the old days – you know, like six months ago – I probably would’ve marked this module up to match the design. In other words, I would’ve looked at the module’s visual hierarchy (metadata up top, headline and content below) and written the following HTML:
<div class="teaser">
<p class="article-byline">By <a href="#">Author Name</a></p>
<a class="comment-count" href="#">126 <i>comments</i></a>
<h1 class="article-title"><a href="#">Article Title</a></h1>
<p class="teaser-excerpt">Lorem ipsum dolor sit amet, consectetur…</p>
</div>
But then I caught myself, and realized this wasn’t the best approach.
Moving Beyond Layout
Since I’ve started working responsively, there’s a question I work into every step of my design process. Whether I’m working in Sketch, CSSing a thing, or researching a project, I try to constantly ask myself:
What if someone doesn’t browse the web like I do?
…Okay, that doesn’t seem especially fancy. (And maybe you came here for fancy.) But as straightforward as that question might seem, it’s been invaluable to so many aspects of my practice. If I’m working on a widescreen layout, that question helps me remember the constraints of the small screen; if I’m working on an interface that has some enhancements for touch, it helps me consider other input modes as I work. It’s also helpful as a reminder that many might not see the screen the same way I do, and that accessibility (in all its forms) should be a throughline for our work on the web.
And that last point, thankfully, was what caught me here. While having the byline and comment count at the top was a lovely visual treatment, it made for a terrible content hierarchy. For example, it’d be a little weird if the page was being read aloud in a speaking browser: the name of the author and the number of comments would be read aloud before the title of the article with which they’re associated.
That’s why I find it’s helpful to begin designing a pattern’s hierarchy before its layout: to move past the visual presentation in front of me, and focus on the underlying content I’m trying to support. In other words, if someone’s encountering my design without the CSS I’ve written, what should their experience be?
So I took a step back, and came up with a different approach:
<div class="teaser">
<h1 class="article-title"><a href="#">Article Title</a></h1>
<h2 class="article-byline">By <a href="#">Author Name</a></h2>
<p class="teaser-excerpt">
Lorem ipsum dolor sit amet, consectetur…
<a class="comment-count" href="#">126 <i>comments</i></a>
</p>
</div>
Much, much better. This felt like a better match for the content I was designing: the headline – easily most important element – was at the top, followed by the author’s name and an excerpt. And while the comment count is visually the most prominent element in the teaser, I decided it was hierarchically the least critical: that’s why it’s at the very end of the excerpt, the last element within our teaser. And with some light styling, we’ve got a respectable-looking hierarchy in place:
Yeah, you’re right – it’s not our final design. But from this basic-looking foundation, we can layer on a bit more complexity. First, we’ll bolster the markup with an extra element around our title and byline:
<div class="teaser">
<div class="teaser-hed">
<h1 class="article-title"><a href="#">Article Title</a></h1>
<h2 class="article-byline">By <a href="#">Author Name</a></h2>
</div>
…
</div>
With that in place, we can use flexbox to tweak our layout, like so:
.teaser-hed {
display: flex;
flex-direction: column-reverse;
}
flex-direction: column-reverse acts a bit like a change in gravity within our teaser-hed element, vertically swapping its two children.
Getting closer! But as great as flexbox is, it doesn’t do anything for elements outside our container, like our little comment count, which is, as you’ve probably noticed, still stranded at the very bottom of our teaser.
Flexbox is, as you might already know, wonderful! And while it enjoys incredibly broad support, there are enough implementations of old versions of Flexbox (in addition to plenty of bugs) that I tend to use a feature test to check if the browser’s using a sufficiently modern version of flexbox. Here’s the one we used:
var doc = document.body || document.documentElement;
var style = doc.style;
if ( style.webkitFlexWrap == '' ||
style.msFlexWrap == '' ||
style.flexWrap == '' ) {
doc.className += " supports-flex";
}
Eagle-eyed readers will note we could have used @supports feature queries to ask browsers if they support certain CSS properties, removing the JavaScript dependency. But since we wanted to serve the layout to IE we opted to write a little question in JavaScript, asking the browser if it supports flex-wrap, a property used elsewhere in the design. If the browser passes the test, then a class of supports-flex gets applied to our html element. And with that class in place, we can safely quarantine our flexbox-enabled layout from less-capable browsers, and finish our teaser’s design:
.supports-flex .teaser-hed {
display: flex;
flex-direction: column-reverse;
}
.supports-flex .teaser .comment-count {
position: absolute;
right: 0;
top: 1.1em;
}
If the supports-flex class is present, we can apply our flexbox layout to the title area, sure – but we can also safely use absolute positioning to pull our comment count out of its default position, and anchor it to the top right of our teaser. In other words, the browsers that don’t meet our threshold for our advanced styles are left with an attractive design that matches our HTML’s content hierarchy; but the ones that pass our test receive the finished, final design.
And with that, our teaser’s complete.
Diving Into Device-Agnostic Design
This is, admittedly, a pretty modest application of flexbox. (For some truly next-level work, I’d recommend Heydon Pickering’s “Flexbox Grid Finesse”, or anything Zoe Mickley Gillenwater publishes.) And for such a simple module, you might feel like this is, well, quite a bit of work. And you’d be right! In fact, it’s not one layout, but two: a lightly styled content hierarchy served to everyone, with the finished design served conditionally to the browsers that can successfully implement it. But I’ve found that thinking about my design as existing in broad experience tiers – in layers – is one of the best ways of designing for the modern web. And what’s more, it works not just for simple modules like our teaser, but for more complex or interactive patterns as well.
Open video
Even a simple search form can be conditionally enhanced, given a little layered thinking.
This more layered approach to interface design isn’t a new one, mind you: it’s been championed by everyone from Filament Group to the BBC. And with all the challenges we keep uncovering, a more device-agnostic approach is one of the best ways I’ve found to practice responsive design. As Trent Walton once wrote,
Like cars designed to perform in extreme heat or on icy roads, websites should be built to face the reality of the web’s inherent variability.
We have a weird job, working on the web. We’re designing for the latest mobile devices, sure, but we’re increasingly aware that our definition of “smartphone” is much too narrow. Browsers have started appearing on our wrists and in our cars’ dashboards, but much of the world’s mobile data flows over sub-3G networks. After all, the web’s evolution has never been charted along a straight line: it’s simultaneously getting slower and faster, with devices new and old coming online every day. With all the challenges in front of us, including many we don’t yet know about, a more device-agnostic, more layered design process can better prepare our patterns – and ourselves – for the future.
(It won’t help you get enough to eat at holiday parties, though.) |
2015 |
Ethan Marcotte |
ethanmarcotte |
2015-12-10T00:00:00+00:00 |
https://24ways.org/2015/putting-my-patterns-through-their-paces/ |
code |
| 55 |
How Tabs Should Work |
Tabs in browsers (not browser tabs) are one of the oldest custom UI elements in a browser that I can think of. They’ve been done to death. But, sadly, most of the time I come across them, the tabs have been badly, or rather partially, implemented.
So this post is my definition of how a tabbing system should work, and one approach of implementing that.
But… tabs are easy, right?
I’ve been writing code for tabbing systems in JavaScript for coming up on a decade, and at one point I was pretty proud of how small I could make the JavaScript for the tabbing system:
var tabs = $('.tab').click(function () {
tabs.hide().filter(this.hash).show();
}).map(function () {
return $(this.hash)[0];
});
$('.tab:first').click();
Simple, right? Nearly fits in a tweet (ignoring the whole jQuery library…). Still, it’s riddled with problems that make it a far from perfect solution.
Requirements: what makes the perfect tab?
All content is navigable and available without JavaScript (crawler-compatible and low JS-compatible).
ARIA roles.
The tabs are anchor links that:
are clickable
have block layout
have their href pointing to the id of the panel element
use the correct cursor (i.e. cursor: pointer).
Since tabs are clickable, the user can open in a new tab/window and the page correctly loads with the correct tab open.
Right-clicking (and Shift-clicking) doesn’t cause the tab to be selected.
Native browser Back/Forward button correctly changes the state of the selected tab (think about it working exactly as if there were no JavaScript in place).
The first three points are all to do with the semantics of the markup and how the markup has been styled. I think it’s easy to do a good job by thinking of tabs as links, and not as some part of an application. Links are navigable, and they should work the same way other links on the page work.
The last three points are JavaScript problems. Let’s investigate that.
The shitmus test
Like a litmus test, here’s a couple of quick ways you can tell if a tabbing system is poorly implemented:
Change tab, then use the Back button (or keyboard shortcut) and it breaks
The tab isn’t a link, so you can’t open it in a new tab
These two basic things are, to me, the bare minimum that a tabbing system should have.
Why is this important?
The people who push their so-called native apps on users can’t have more reasons why the web sucks. If something as basic as a tab doesn’t work, obviously there’s more ammo to push a closed native app or platform on your users.
If you’re going to be a web developer, one of your responsibilities is to maintain established interactivity paradigms. This doesn’t mean don’t innovate. But it does mean: stop fucking up my scrolling experience with your poorly executed scroll effects. </rant> :breath:
URI fragment, absolute URL or query string?
A URI fragment (AKA the # hash bit) would be using mysite.com/config#content to show the content panel. A fully addressable URL would be mysite.com/config/content. Using a query string (by way of filtering the page): mysite.com/config?tab=content.
This decision really depends on the context of your tabbing system. For something like GitHub’s tabs to view a pull request, it makes sense that the full URL changes.
For our problem though, I want to solve the issue when the page doesn’t do a full URL update; that is, your regular run-of-the-mill tabbing system.
I used to be from the school of using the hash to show the correct tab, but I’ve recently been exploring whether the query string can be used. The biggest reason is that multiple hashes don’t work, and comma-separated hash fragments don’t make any sense to control multiple tabs (since it doesn’t actually link to anything).
For this article, I’ll keep focused on using a single tabbing system and a hash on the URL to control the tabs.
Markup
I’m going to assume subcontent, so my markup would look like this (yes, this is a cat demo…):
<ul class="tabs">
<li><a class="tab" href="#dizzy">Dizzy</a></li>
<li><a class="tab" href="#ninja">Ninja</a></li>
<li><a class="tab" href="#missy">Missy</a></li>
</ul>
<div id="dizzy">
<!-- panel content -->
</div>
<div id="ninja">
<!-- panel content -->
</div>
<div id="missy">
<!-- panel content -->
</div>
It’s important to note that in the markup the link used for an individual tab references its panel content using the hash, pointing to the id on the panel. This will allow our content to connect up without JavaScript and give us a bunch of features for free, which we’ll see once we’re on to writing the code.
URL-driven tabbing systems
Instead of making the code responsive to the user’s input, we’re going to exclusively use the browser URL and the hashchange event on the window to drive this tabbing system. This way we get Back button support for free.
With that in mind, let’s start building up our code. I’ll assume we have the jQuery library, but I’ve also provided the full code working without a library (vanilla, if you will), but it depends on relatively new (polyfillable) tech like classList and dataset (which generally have IE10 and all other browser support).
Note that I’ll start with the simplest solution, and I’ll refactor the code as I go along, like in places where I keep calling jQuery selectors.
function show(id) {
// remove the selected class from the tabs,
// and add it back to the one the user selected
$('.tab').removeClass('selected').filter(function () {
return (this.hash === id);
}).addClass('selected');
// now hide all the panels, then filter to
// the one we're interested in, and show it
$('.panel').hide().filter(id).show();
}
$(window).on('hashchange', function () {
show(location.hash);
});
// initialise by showing the first panel
show('#dizzy');
This works pretty well for such little code. Notice that we don’t have any click handlers for the user and the Back button works right out of the box.
However, there’s a number of problems we need to fix:
The initialised tab is hard-coded to the first panel, rather than what’s on the URL.
If there’s no hash on the URL, all the panels are hidden (and thus broken).
If you scroll to the bottom of the example, you’ll find a “top” link; clicking that will break our tabbing system.
I’ve purposely made the page long, so that when you click on a tab, you’ll see the page scrolls to the top of the tab. Not a huge deal, but a bit annoying.
From our criteria at the start of this post, we’ve already solved items 4 and 5. Not a terrible start. Let’s solve items 1 through 3 next.
Using the URL to initialise correctly and protect from breakage
Instead of arbitrarily picking the first panel from our collection, the code should read the current location.hash and use that if it’s available.
The problem is: what if the hash on the URL isn’t actually for a tab?
The solution here is that we need to cache a list of known panel IDs. In fact, well-written DOM scripting won’t continuously search the DOM for nodes. That is, when the show function kept calling $('.tab').each(...) it was wasteful. The result of $('.tab') should be cached.
So now the code will collect all the tabs, then find the related panels from those tabs, and we’ll use that list to double the values we give the show function (during initialisation, for instance).
// collect all the tabs
var tabs = $('.tab');
// get an array of the panel ids (from the anchor hash)
var targets = tabs.map(function () {
return this.hash;
}).get();
// use those ids to get a jQuery collection of panels
var panels = $(targets.join(','));
function show(id) {
// if no value was given, let's take the first panel
if (!id) {
id = targets[0];
}
// remove the selected class from the tabs,
// and add it back to the one the user selected
tabs.removeClass('selected').filter(function () {
return (this.hash === id);
}).addClass('selected');
// now hide all the panels, then filter to
// the one we're interested in, and show it
panels.hide().filter(id).show();
}
$(window).on('hashchange', function () {
var hash = location.hash;
if (targets.indexOf(hash) !== -1) {
show(hash);
}
});
// initialise
show(targets.indexOf(location.hash) !== -1 ? location.hash : '');
The core of working out which tab to initialise with is solved in that last line: is there a location.hash? Is it in our list of valid targets (panels)? If so, select that tab.
The second breakage we saw in the original demo was that clicking the “top” link would break our tabs. This was due to the hashchange event firing and the code didn’t validate the hash that was passed. Now this happens, the panels don’t break.
So far we’ve got a tabbing system that:
Works without JavaScript.
Supports right-click and Shift-click (and doesn’t select in these cases).
Loads the correct panel if you start with a hash.
Supports native browser navigation.
Supports the keyboard.
The only annoying problem we have now is that the page jumps when a tab is selected. That’s due to the browser following the default behaviour of an internal link on the page. To solve this, things are going to get a little hairy, but it’s all for a good cause.
Removing the jump to tab
You’d be forgiven for thinking you just need to hook a click handler and return false. It’s what I started with. Only that’s not the solution. If we add the click handler, it breaks all the right-click and Shift-click support.
There may be another way to solve this, but what follows is the way I found – and it works. It’s just a bit… hairy, as I said.
We’re going to strip the id attribute off the target panel when the user tries to navigate to it, and then put it back on once the show code starts to run. This change will mean the browser has nowhere to navigate to for that moment, and won’t jump the page.
The change involves the following:
Add a click handle that removes the id from the target panel, and cache this in a target variable that we’ll use later in hashchange (see point 4).
In the same click handler, set the location.hash to the current link’s hash. This is important because it forces a hashchange event regardless of whether the URL actually changed, which prevents the tabs breaking (try it yourself by removing this line).
For each panel, put a backup copy of the id attribute in a data property (I’ve called it old-id).
When the hashchange event fires, if we have a target value, let’s put the id back on the panel.
These changes result in this final code:
/*global $*/
// a temp value to cache *what* we're about to show
var target = null;
// collect all the tabs
var tabs = $('.tab').on('click', function () {
target = $(this.hash).removeAttr('id');
// if the URL isn't going to change, then hashchange
// event doesn't fire, so we trigger the update manually
if (location.hash === this.hash) {
// but this has to happen after the DOM update has
// completed, so we wrap it in a setTimeout 0
setTimeout(update, 0);
}
});
// get an array of the panel ids (from the anchor hash)
var targets = tabs.map(function () {
return this.hash;
}).get();
// use those ids to get a jQuery collection of panels
var panels = $(targets.join(',')).each(function () {
// keep a copy of what the original el.id was
$(this).data('old-id', this.id);
});
function update() {
if (target) {
target.attr('id', target.data('old-id'));
target = null;
}
var hash = window.location.hash;
if (targets.indexOf(hash) !== -1) {
show(hash);
}
}
function show(id) {
// if no value was given, let's take the first panel
if (!id) {
id = targets[0];
}
// remove the selected class from the tabs,
// and add it back to the one the user selected
tabs.removeClass('selected').filter(function () {
return (this.hash === id);
}).addClass('selected');
// now hide all the panels, then filter to
// the one we're interested in, and show it
panels.hide().filter(id).show();
}
$(window).on('hashchange', update);
// initialise
if (targets.indexOf(window.location.hash) !== -1) {
update();
} else {
show();
}
This version now meets all the criteria I mentioned in my original list, except for the ARIA roles and accessibility. Getting this support is actually very cheap to add.
ARIA roles
This article on ARIA tabs made it very easy to get the tabbing system working as I wanted.
The tasks were simple:
Add aria-role set to tab for the tabs, and tabpanel for the panels.
Set aria-controls on the tabs to point to their related panel (by id).
I use JavaScript to add tabindex=0 to all the tab elements.
When I add the selected class to the tab, I also set aria-selected to true and, inversely, when I remove the selected class I set aria-selected to false.
When I hide the panels I add aria-hidden=true, and when I show the specific panel I set aria-hidden=false.
And that’s it. Very small changes to get full sign-off that the tabbing system is bulletproof and accessible.
Check out the final version (and the non-jQuery version as promised).
In conclusion
There’s a lot of tab implementations out there, but there’s an equal amount that break the browsing paradigm and the simple linkability of content. Clearly there’s a special hell for those tab systems that don’t even use links, but I think it’s clear that even in something that’s relatively simple, it’s the small details that make or break the user experience.
Obviously there are corners I’ve not explored, like when there’s more than one set of tabs on a page, and equally whether you should deliver the initial markup with the correct tab selected. I think the answer lies in using query strings in combination with hashes on the URL, but maybe that’s for another year! |
2015 |
Remy Sharp |
remysharp |
2015-12-22T00:00:00+00:00 |
https://24ways.org/2015/how-tabs-should-work/ |
code |
| 63 |
Be Fluid with Your Design Skills: Build Your Own Sites |
Just five years ago in 2010, when we were all busy trying to surprise and delight, learning CSS3 and trying to get whole websites onto one page, we had a poster on our studio wall. It was entitled ‘Designers Vs Developers’, an infographic that showed us the differences between the men(!) who created websites.
Designers wore skinny jeans and used Macs and developers wore cargo pants and brought their own keyboards to work. We began to learn that designers and developers were not only doing completely different jobs but were completely different people in every way. This opinion was backed up by hundreds of memes, millions of tweets and pages of articles which used words like void and battle and versus.
Thankfully, things move quickly in this industry; the wide world of web design has moved on in the last five years. There are new devices, technologies, tools – and even a few women. Designers have been helped along by great apps, software, open source projects, conferences, and a community of people who, to my unending pride, love to share their knowledge and their work.
So the world has moved on, and if Miley Cyrus, Ruby Rose and Eliot Sumner are identifying as gender fluid (an identity which refers to a gender which varies over time or is a combination of identities), then I would like to come out as discipline fluid!
OK, I will probably never identify as a developer, but I will identify as fluid! How can we be anything else in an industry that moves so quickly? That’s how we should think of our skills, our interests and even our job titles. After all, Steve Jobs told us that “Design is not just what it looks like and feels like. Design is how it works.” Sorry skinny-jean-wearing designers – this means we’re all designing something together. And it’s not just about knowing the right words to use: you have to know how it feels. How it feels when you make something work, when you fix that bug, when you make it work on IE.
Like anything in life, things run smoothly when you make the effort to share experiences, empathise and deeply understand the needs of others. How can designers do that if they’ve never built their own site? I’m not talking the big stuff, I’m talking about your portfolio site, your mate’s business website, a website for that great idea you’ve had. I’m talking about doing it yourself to get an unique insight into how it feels.
We all know that designers and developers alike love an <ol>, so here it is.
Ten reasons designers should be fluid with their skills and build their own sites
1. It’s never been easier
Now here’s where the definition of ‘build’ is going to get a bit loose and people are going to get angry, but when I say it’s never been easier I mean because of the existence of apps and software like WordPress, Squarespace, Tumblr, et al. It’s easy to make something and get it out there into the world, and these are all gateway drugs to hard coding!
2. You’ll understand how it feels
How it feels to be so proud that something actually works that you momentarily don’t notice if the kerning is off or the padding is inconsistent. How it feels to see your site appear when you’ve redirected a URL. How it feels when you just can’t work out where that one extra space is in a line of PHP that has killed your whole site.
3. It makes you a designer
Not a better designer, it makes you a designer when you are designing how things look and how they work.
4. You learn about movement
Photoshop and Sketch just don’t cut it yet. Until you see your site in a browser or your app on a phone, it’s hard to imagine how it moves. Building your own sites shows you that it’s not just about how the content looks on the screen, but how it moves, interacts and feels.
5. You make techie friends
All the tutorials and forums in the world can’t beat your network of techie friends. Since I started working in web design I have worked with, sat next to, and co-created with some of the greatest developers. Developers who’ve shared their knowledge, encouraged me to build things, patiently explained HTML, CSS, servers, divs, web fonts, iOS development. There has been no void, no versus, very few battles; just people who share an interest and love of making things.
6. You will own domain names
When something is paid for, online and searchable then it’s real and you’ve got to put the work in. Buying domains has taught me how to stop procrastinating, but also about DNS, FTP, email, and how servers work.
7. People will ask you to do things
Learning about code and development opens a whole new world of design. When you put your own personal websites and projects out there people ask you to do more things. OK, so sometimes those things are “Make me a website for free”, but more often it’s cool things like “Come and speak at my conference”, “Write an article for my magazine” and “Collaborate with me.”
8. The young people are coming!
They love typography, they love print, they love layout, but they’ve known how to put a website together since they started their first blog aged five and they show me clever apps they’ve knocked together over the weekend! They’re new, they’re fluid, and they’re better than us!
9. Your portfolio is your portfolio
OK, it’s an obvious one, but as designers our work is our CV, our legacy! We need to show our skill, our attention to detail and our creativity in the way we showcase our work. Building your portfolio is the best way to start building your own websites. (And please be that designer who’s bothered to work out how to change the Squarespace favicon!)
10. It keeps you fluid!
Building your own websites is tough. You’ll never be happy with it, you’ll constantly be updating it to keep up with technology and fashion, and by the time you’ve finished it you’ll want to start all over again. Perfect for forcing you to stay up-to-date with what’s going on in the industry.
</ol> |
2015 |
Ros Horner |
roshorner |
2015-12-12T00:00:00+00:00 |
https://24ways.org/2015/be-fluid-with-your-design-skills-build-your-own-sites/ |
code |
| 64 |
Being Responsive to the Small Things |
It’s that time of the year again to trim the tree with decorations. Or maybe a DOM tree?
Any web page is made of HTML elements that lay themselves out in a tree structure. We start at the top and then have multiple branches with branches that branch out from there.
To decorate our tree, we use CSS to specify which branches should receive the tinsel we wish to adorn upon it. It’s all so lovely.
In years past, this was rather straightforward. But these days, our trees need to be versatile. They need to be responsive!
Responsive web design is pretty wonderful, isn’t it? Based on our viewport, we can decide how elements on the page should change their appearance to accommodate various constraints using media queries.
Clearleft have a delightfully clean and responsive site
Alas, it’s not all sunshine, lollipops, and rainbows.
With complex layouts, we may have design chunks — let’s call them components — that appear in different contexts. Each context may end up providing its own constraints on the design, both in its default state and in its possibly various responsive states.
Media queries, however, limit us to the context of the entire viewport, not individual containers on the page. For every container our component lives in, we need to specify how to rearrange things in that context. The more complex the system, the more contexts we need to write code for.
@media (min-width: 800px) {
.features > .component { }
.sidebar > .component {}
.grid > .component {}
}
Each new component and each new breakpoint just makes the entire system that much more difficult to maintain.
@media (min-width: 600px) {
.features > .component { }
.grid > .component {}
}
@media (min-width: 800px) {
.features > .component { }
.sidebar > .component {}
.grid > .component {}
}
@media (min-width: 1024px) {
.features > .component { }
}
Enter container queries
Container queries, also known as element queries, allow you to specify conditional CSS based on the width (or maybe height) of the container that an element lives in. In doing so, you no longer have to consider the entire page and the interplay of all the elements within.
With container queries, you’ll be able to consider the breakpoints of just the component you’re designing. As a result, you end up specifying less code and the components you develop have fewer dependencies on the things around them. (I guess that makes your components more independent.)
Awesome, right?
There’s only one catch.
Browsers can’t do container queries. There’s not even an official specification for them yet. The Responsive Issues (née Images) Community Group is looking into solving how such a thing would actually work.
See, container queries are tricky from an implementation perspective. The contents of a container can affect the size of the container. Because of this, you end up with troublesome circular references.
For example, if the width of the container is under 500px then the width of the child element should be 600px, and if the width of the container is over 500px then the width of the child element should be 400px.
Can you see the dilemma? When the container is under 500px, the child element resizes to 600px and suddenly the container is 600px. If the container is 600px, then the child element is 400px! And so on, forever. This is bad.
I guess we should all just go home and sulk about how we just got a pile of socks when we really wanted the Millennium Falcon.
Our saviour this Christmas: JavaScript
The three wise men — Tim Berners-Lee, Håkon Wium Lie, and Brendan Eich — brought us the gifts of HTML, CSS, and JavaScript.
To date, there are a handful of open source solutions to fill the gap until a browser implementation sees the light of day.
Elementary by Scott Jehl
ElementQuery by Tyson Matanich
EQ.js by Sam Richards
CSS Element Queries from Marcj
Using any of these can sometimes feel like your toy broke within ten minutes of unwrapping it.
Each take their own approach on how to specify the query conditions. For example, Elementary, the smallest of the group, only supports min-width declarations made in a :before selector.
.mod-foo:before {
content: “300 410 500”;
}
The script loops through all the elements that you specify, reading the content property and then setting an attribute value on the HTML element, allowing you to use CSS to style that condition.
.mod-foo[data-minwidth~="300"] {
background: blue;
}
To get the script to run, you’ll need to set up event handlers for when the page loads and for when it resizes.
window.addEventListener( "load", window.elementary, false );
window.addEventListener( "resize", window.elementary, false );
This works okay for static sites but breaks down on pages where elements can expand or contract, or where new content is dynamically inserted.
In the case of EQ.js, the implementation requires the creation of the breakpoints in the HTML. That means that you have implementation details in HTML, JavaScript, and CSS. (Although, with the JavaScript, once it’s in the build system, it shouldn’t ever be much of a concern unless you’re tracking down a bug.)
Another problem you may run into is the use of content delivery networks (CDNs) or cross-origin security issues. The ElementQuery and CSS Element Queries libraries need to be able to read the CSS file. If you are unable to set up proper cross-origin resource sharing (CORS) headers, these libraries won’t help.
At Shopify, for example, we had all of these problems. The admin that store owners use is very dynamic and the CSS and JavaScript were being loaded from a CDN that prevented the JavaScript from reading the CSS.
To go responsive, the team built their own solution — one similar to the other scripts above, in that it loops through elements and adds or removes classes (instead of data attributes) based on minimum or maximum width.
The caveat to this particular approach is that the declaration of breakpoints had to be done in JavaScript.
elements = [
{ ‘module’: “.carousel”, “className”:’alpha’, minWidth: 768, maxWidth: 1024 },
{ ‘module’: “.button”, “className”:’beta’, minWidth: 768, maxWidth: 1024 } ,
{ ‘module’: “.grid”, “className”:’cappa’, minWidth: 768, maxWidth: 1024 }
]
With that done, the script then had to be set to run during various events such as inserting new content via Ajax calls. This sometimes reveals itself in flashes of unstyled breakpoints (FOUB). An unfortunate side effect but one largely imperceptible.
Using this approach, however, allowed the Shopify team to make the admin responsive really quickly. Each member of the team was able to tackle the responsive story for a particular component without much concern for how all the other components would react.
Each element responds to its own breakpoint that would amount to dozens of breakpoints using traditional breakpoints. This approach allows for a truly fluid and adaptive interface for all screens.
Christmas is over
I wish I were the bearer of greater tidings and cheer. It’s not all bad, though. We may one day see browsers implement container queries natively. At which point, we shall all rejoice! |
2015 |
Jonathan Snook |
jonathansnook |
2015-12-19T00:00:00+00:00 |
https://24ways.org/2015/being-responsive-to-the-small-things/ |
code |
| 65 |
The Accessibility Mindset |
Accessibility is often characterized as additional work, hard to learn and only affecting a small number of people. Those myths have no logical foundation and often stem from outdated information or misconceptions.
Indeed, it is an additional skill set to acquire, quite like learning new JavaScript frameworks, CSS layout techniques or new HTML elements. But it isn’t particularly harder to learn than those other skills.
A World Health Organization (WHO) report on disabilities states that,
[i]ncluding children, over a billion people (or about 15% of the world’s population) were estimated to be living with disability.
Being disabled is not as unusual as one might think. Due to chronic health conditions and older people having a higher risk of disability, we are also currently paving the cowpath to an internet that we can still use in the future.
Accessibility has a very close relationship with usability, and advancements in accessibility often yield improvements in the usability of a website. Websites are also more adaptable to users’ needs when they are built in an accessible fashion.
Beyond the bare minimum
In the time of table layouts, web developers could create code that passed validation rules but didn’t adhere to the underlying semantic HTML model. We later developed best practices, like using lists for navigation, and with HTML5 we started to wrap those lists in nav elements. Working with accessibility standards is similar. The Web Content Accessibility Guidelines (WCAG) 2.0 can inform your decision to make websites accessible and can be used to test that you met the success criteria. What it can’t do is measure how well you met them.
W3C developed a long list of techniques that can be used to make your website accessible, but you might find yourself in a situation where you need to adapt those techniques to be the most usable solution for your particular problem.
The checkbox below is implemented in an accessible way: The input element has an id and the label associated with the checkbox refers to the input using the for attribute. The hover area is shown with a yellow background and a black dotted border:
Open video
The label is clickable and the checkbox has an accessible description. Job done, right? Not really. Take a look at the space between the label and the checkbox:
Open video
The gutter is created using a right margin which pushes the label to the right. Users would certainly expect this space to be clickable as well. The simple solution is to wrap the label around the checkbox and the text:
Open video
You can also set the label to display:block; to further increase the clickable area:
Open video
And while we’re at it, users might expect the whole box to be clickable anyway. Let’s apply the CSS that was on a wrapping div element to the label directly:
Open video
The result enhances the usability of your form element tremendously for people with lower dexterity, using a voice mouse, or using touch interfaces. And we only used basic HTML and CSS techniques; no JavaScript was added and not one extra line of CSS.
<form action="#">
<label for="uniquecheckboxid">
<input type="checkbox" name="checkbox" id="uniquecheckboxid" />
Checkbox 4
</label>
</form>
Button Example
The button below looks like a typical edit button: a pencil icon on a real button element. But if you are using a screen reader or a braille keyboard, the button is just read as “button” without any indication of what this button is for.
Open video
A screen reader announcing a button. Contains audio.
The code snippet shows why the button is not properly announced:
<button>
<span class="icon icon-pencil"></span>
</button>
An icon font is used to display the icon and no text alternative is given. A possible solution to this problem is to use the title or aria-label attributes, which solves the alternative text use case for screen reader users:
Open video
A screen reader announcing a button with a title.
However, screen readers are not the only way people with and without disabilities interact with websites. For example, users can reset or change font families and sizes at will. This helps many users make websites easier to read, including people with dyslexia. Your icon font might be replaced by a font that doesn’t include the glyphs that are icons. Additionally, the icon font may not load for users on slow connections, like on mobile phones inside trains, or because users decided to block external fonts altogether. The following screenshots show the mobile GitHub view with and without external fonts:
The mobile GitHub view with and without external fonts.
Even if the title/aria-label approach was used, the lack of visual labels is a barrier for most people under those circumstances. One way to tackle this is using the old-fashioned img element with an appropriate alt attribute, but surprisingly not every browser displays the alternative text visually when the image doesn’t load.
<button>
<img src="icon-pencil.svg" alt="Edit">
</button>
Providing always visible text is an alternative that can work well if you have the space. It also helps users understand the meaning of the icons.
<button>
<span class="icon icon-pencil"></span> Edit
</button>
This also reads just fine in screen readers:
Open video
A screen reader announcing the revised button.
Clever usability enhancements don’t stop at a technical implementation level. Take the BBC iPlayer pages as an example: when a user navigates the “captioned videos” or “audio description” categories and clicks on one of the videos, captions or audio descriptions are automatically switched on. Small things like this enhance the usability and don’t need a lot of engineering resources. It is more about connecting the usability dots for people with disabilities. Read more about the BBC iPlayer accessibility case study.
More information
W3C has created several documents that make it easier to get the gist of what web accessibility is and how it can benefit everyone. You can find out “How People with Disabilities Use the Web”, there are “Tips for Getting Started” for developers, designers and content writers. And for the more seasoned developer there is a set of tutorials on web accessibility, including information on crafting accessible forms and how to use images in an accessible way.
Conclusion
You can only produce a web project with long-lasting accessibility if accessibility is not an afterthought. Your organization, your division, your team need to think about accessibility as something that is the foundation of your website or project. It needs to be at the same level as performance, code quality and design, and it needs the same attention. Users often don’t notice when those fundamental aspects of good website design and development are done right. But they’ll always know when they are implemented poorly.
If you take all this into consideration, you can create accessibility solutions based on the available data and bring accessibility to people who didn’t know they’d need it:
Open video
In this video from the latest Apple keynote, the Apple TV is operated by voice input through a remote. When the user asks “What did she say?” the video jumps back fifteen seconds and captions are switched on for a brief time. All three, the remote, voice input and captions have their roots in assisting people with disabilities. Now they benefit everyone. |
2015 |
Eric Eggert |
ericeggert |
2015-12-17T00:00:00+00:00 |
https://24ways.org/2015/the-accessibility-mindset/ |
code |
| 68 |
Grid, Flexbox, Box Alignment: Our New System for Layout |
Three years ago for 24 ways 2012, I wrote an article about a new CSS layout method I was excited about. A specification had emerged, developed by people from the Internet Explorer team, bringing us a proper grid system for the web. In 2015, that Internet Explorer implementation is still the only public implementation of CSS grid layout. However, in 2016 we should be seeing it in a new improved form ready for our use in browsers.
Grid layout has developed hidden behind a flag in Blink, and in nightly builds of WebKit and, latterly, Firefox. By being developed in this way, breaking changes could be safely made to the specification as no one was relying on the experimental implementations in production work.
Another new layout method has emerged over the past few years in a more public and perhaps more painful way. Shipped prefixed in browsers, The flexible box layout module (flexbox) was far too tempting for developers not to use on production sites. Therefore, as changes were made to the specification, we found ourselves with three different flexboxes, and browser implementations that did not match one another in completeness or in the version of specified features they supported.
Owing to the different ways these modules have come into being, when I present on grid layout it is often the very first time someone has heard of the specification. A question I keep being asked is whether CSS grid layout and flexbox are competing layout systems, as though it might be possible to back the loser in a CSS layout competition. The reality, however, is that these two methods will sit together as one system for doing layout on the web, each method playing to certain strengths and serving particular layout tasks.
If there is to be a loser in the battle of the layouts, my hope is that it will be the layout frameworks that tie our design to our markup. They have been a necessary placeholder while we waited for a true web layout system, but I believe that in a few years time we’ll be easily able to date a website to circa 2015 by seeing <div class="row"> or <div class="col-md-3"> in the markup.
In this article, I’m going to take a look at the common features of our new layout systems, along with a couple of examples which serve to highlight the differences between them.
To see the grid layout examples you will need to enable grid in your browser. The easiest thing to do is to enable the experimental web platform features flag in Chrome. Details of current browser support can be found here.
Relationship
Items only become flex or grid items if they are a direct child of the element that has display:flex, display:grid or display:inline-grid applied. Those direct children then understand themselves in the context of the complete layout. This makes many things possible. It’s the lack of relationship between elements that makes our existing layout methods difficult to use. If we float two columns, left and right, we have no way to tell the shorter column to extend to the height of the taller one. We have expended a lot of effort trying to figure out the best way to make full-height columns work, using techniques that were never really designed for page layout.
At a very simple level, the relationship between elements means that we can easily achieve full-height columns. In flexbox:
See the Pen Flexbox equal height columns by rachelandrew (@rachelandrew) on CodePen.
And in grid layout (requires a CSS grid-supporting browser):
See the Pen Grid equal height columns by rachelandrew (@rachelandrew) on CodePen.
Alignment
Full-height columns rely on our flex and grid items understanding themselves as part of an overall layout. They also draw on a third new specification: the box alignment module. If vertical centring is a gift you’d like to have under your tree this Christmas, then this is the box you’ll want to unwrap first.
The box alignment module takes the alignment and space distribution properties from flexbox and applies them to other layout methods. That includes grid layout, but also other layout methods. Once implemented in browsers, this specification will give us true vertical centring of all the things.
Our examples above achieved full-height columns because the default value of align-items is stretch. The value ensured our columns stretched to the height of the tallest. If we want to use our new vertical centring abilities on all items, we would set align-items:center on the container. To align one flex or grid item, apply the align-self property.
The examples below demonstrate these alignment properties in both grid layout and flexbox. The portrait image of Widget the cat is aligned with the default stretch. The other three images are aligned using different values of align-self.
Take a look at an example in flexbox:
See the Pen Flexbox alignment by rachelandrew (@rachelandrew) on CodePen.
And also in grid layout (requires a CSS grid-supporting browser):
See the Pen Grid alignment by rachelandrew (@rachelandrew) on CodePen.
The alignment properties used with CSS grid layout.
Fluid grids
A cornerstone of responsive design is the concept of fluid grids.
“[…]every aspect of the grid—and the elements laid upon it—can be expressed as a proportion relative to its container.”
—Ethan Marcotte, “Fluid Grids”
The method outlined by Marcotte is to divide the target width by the context, then use that value as a percentage value for the width property on our element.
h1 {
margin-left: 14.575%; /* 144px / 988px = 0.14575 */
width: 70.85%; /* 700px / 988px = 0.7085 */
}
In more recent years, we’ve been able to use calc() to simplify this (at least, for those of us able to drop support for Internet Explorer 8). However, flexbox and grid layout make fluid grids simple.
The most basic of flexbox demos shows this fluidity in action. The justify-content property – another property defined in the box alignment module – can be used to create an equal amount of space between or around items. As the available width increases, more space is assigned in proportion.
In this demo, the list items are flex items due to display:flex being added to the ul. I have given them a maximum width of 250 pixels. Any remaining space is distributed equally between the items as the justify-content property has a value of space-between.
See the Pen Flexbox: justify-content by rachelandrew (@rachelandrew) on CodePen.
For true fluid grid-like behaviour, your new flexible friends are flex-grow and flex-shrink. These properties give us the ability to assign space in proportion.
The flexbox flex property is a shorthand for:
flex-grow
flex-shrink
flex-basis
The flex-basis property sets the default width for an item. If flex-grow is set to 0, then the item will not grow larger than the flex-basis value; if flex-shrink is 0, the item will not shrink smaller than the flex-basis value.
flex: 1 1 200px: a flexible box that can grow and shrink from a 200px basis.
flex: 0 0 200px: a box that will be 200px and cannot grow or shrink.
flex: 1 0 200px: a box that can grow bigger than 200px, but not shrink smaller.
In this example, I have a set of boxes that can all grow and shrink equally from a 100 pixel basis.
See the Pen Flexbox: flex-grow by rachelandrew (@rachelandrew) on CodePen.
What I would like to happen is for the first element, containing a portrait image, to take up less width than the landscape images, thus keeping it more in proportion. I can do this by changing the flex-grow value. By giving all the items a value of 1, they all gain an equal amount of the available space after the 100 pixel basis has been worked out.
If I give them all a value of 3 and the first box a value of 1, the other boxes will be assigned three parts of the available space while box 1 is assigned only one part. You can see what happens in this demo:
See the Pen Flexbox: flex-grow by rachelandrew (@rachelandrew) on CodePen.
Once you understand flex-grow, you should easily be able to grasp how the new fraction unit (fr, defined in the CSS grid layout specification) works. Like flex-grow, this unit allows us to assign available space in proportion. In this case, we assign the space when defining our track sizes.
In this demo (which requires a CSS grid-supporting browser), I create a four-column grid using the fraction unit to define my track sizes. The first track is 1fr in width, and the others 2fr.
grid-template-columns: 1fr 2fr 2fr 2fr;
See the Pen Grid fraction units by rachelandrew (@rachelandrew) on CodePen.
The four-track grid.
Separation of concerns
My younger self petitioned my peers to stop using tables for layout and to move to CSS. One of the rallying cries of that movement was the concept of separating our source and content from how they were displayed. It was something of a failed promise given the tools we had available: the display leaked into the markup with the need for redundant elements to cope with browser bugs, or visual techniques that just could not be achieved without supporting markup.
Browsers have improved, but even now we can find ourselves compromising the ideal document structure so we can get the layout we want at various breakpoints. In some ways, the situation has returned to tables-for-layout days. Many of the current grid frameworks rely on describing our layout directly in the markup. We add divs for rows, and classes to describe the number of desired columns. We nest these constructions of divs inside one another.
Here is a snippet from the Bootstrap grid examples – two columns with two nested columns:
<div class="row">
<div class="col-md-8">
.col-md-8
<div class="row">
<div class="col-md-6">
.col-md-6
</div>
<div class="col-md-6">
.col-md-6
</div>
</div>
</div>
<div class="col-md-4">
.col-md-4
</div>
</div>
Not a million miles away from something I might have written in 1999.
<table>
<tr>
<td class="col-md-8">
.col-md-8
<table>
<tr>
<td class="col-md-6">
.col-md-6
</td>
<td class="col-md-6">
.col-md-6
</td>
</tr>
</table>
</td>
<td class="col-md-4">
.col-md-4
</td>
</tr>
</table>
Grid and flexbox layouts do not need to be described in markup. The layout description happens entirely in the CSS, meaning that elements can be moved around from within the presentation layer.
Flexbox gives us the ability to reverse the flow of elements, but also to set the order of elements with the order property. This is demonstrated here, where Widget the cat is in position 1 in the source, but I have used the order property to display him after the things that are currently unimpressive to him.
See the Pen Flexbox: order by rachelandrew (@rachelandrew) on CodePen.
Grid layout takes this a step further. Where flexbox lets us set the order of items in a single dimension, grid layout gives us the ability to position things in two dimensions: both rows and columns. Defined in the CSS, this positioning can be changed at any breakpoint without needing additional markup. Compare the source order with the display order in this example (requires a CSS grid-supporting browser):
See the Pen Grid positioning in two dimensions by rachelandrew (@rachelandrew) on CodePen.
Laying out our items in two dimensions using grid layout.
As these demos show, a straightforward way to decide if you should use grid layout or flexbox is whether you want to position items in one dimension or two. If two, you want grid layout.
A note on accessibility and reordering
The issues arising from this powerful ability to change the way items are ordered visually from how they appear in the source have been the subject of much discussion. The current flexbox editor’s draft states
“Authors must use order only for visual, not logical, reordering of content. Style sheets that use order to perform logical reordering are non-conforming.”
—CSS Flexible Box Layout Module Level 1, Editor’s Draft (3 December 2015)
This is to ensure that non-visual user agents (a screen reader, for example) can rely on the document source order as being correct. Take care when reordering that you do so from the basis of a sound document that makes sense in terms of source order. Avoid using visual order to convey meaning.
Automatic content placement with rules
Having control over the order of items, or placing items on a predefined grid, is nice. However, we can often do that already with one method or another and we have frameworks and tools to help us. Tools such as Susy mean we can even get away from stuffing our markup full of grid classes. However, our new layout methods give us some interesting new possibilities.
Something that is useful to be able to do when dealing with content coming out of a CMS or being pulled from some other source, is to define a bunch of rules and then say, “Display this content, using these rules.”
As an example of this, I will leave you with a Christmas poem displayed in a document alongside Widget the cat and some of the decorations that are bringing him no Christmas cheer whatsoever.
The poem is displayed first in the source as a set of paragraphs. I’ve added a class identifying each of the four paragraphs but they are displayed in the source as one text. Below that are all my images, some landscape and some portrait; I’ve added a class of landscape to the landscape ones.
The mobile-first grid is a single column and I use line-based placement to explicitly position my poem paragraphs. The grid layout auto-placement rules then take over and place the images into the empty cells left in the grid.
At wider screen widths, I declare a four-track grid, and position my poem around the grid, keeping it in a readable order.
I also add rules to my landscape class, stating that these items should span two tracks. Once again the grid layout auto-placement rules position the rest of my images without my needing to position them. You will see that grid layout takes items out of source order to fill gaps in the grid. It does this because I have set the property grid-auto-flow to dense. The default is sparse meaning that grid will not attempt this backfilling behaviour.
Take a look and play around with the full demo (requires a CSS grid layout-supporting browser):
See the Pen Grid auto-flow with rules by rachelandrew (@rachelandrew) on CodePen.
The final automatic placement example.
My wish for 2016
I really hope that in 2016, we will see CSS grid layout finally emerge from behind browser flags, so that we can start to use these features in production — that we can start to move away from using the wrong tools for the job.
However, I also hope that we’ll see developers fully embracing these tools as the new system that they are. I want to see people exploring the possibilities they give us, rather than trying to get them to behave like the grid systems of 2015. As you discover these new modules, treat them as the new paradigm that they are, get creative with them. And, as you find the edges of possibility with them, take that feedback to the CSS Working Group. Help improve the layout systems that will shape the look of the future web.
Some further reading
I maintain a site of grid layout examples and resources at Grid by Example.
The three CSS specifications I’ve discussed can be found as editor’s drafts: CSS grid, flexbox, box alignment.
I wrote about the last three years of my interest in CSS grid layout, which gives something of a history of the specification.
More examples of box alignment and grid layout.
My presentation at Fronteers earlier this year, in which I explain more about these concepts. |
2015 |
Rachel Andrew |
rachelandrew |
2015-12-15T00:00:00+00:00 |
https://24ways.org/2015/grid-flexbox-box-alignment-our-new-system-for-layout/ |
code |
| 70 |
Bringing Your Code to the Streets |
— or How to Be a Street VJ
Our amazing world of web code is escaping out of the browser at an alarming rate and appearing in every aspect of the environment around us. Over the past few years we’ve already seen JavaScript used server-side, hardware coded with JavaScript, a rise of native style and desktop apps created with HTML, CSS and JavaScript, and even virtual reality (VR) is getting its fair share of front-end goodness.
You can go ahead and play with JavaScript-powered hardware such as the Tessel or the Espruino to name a couple. Just check out the Tessel project page to see JavaScript in the world of coffee roasting or sleep tracking your pet. With the rise of the internet of things, JavaScript can be seen collecting information on flooding among other things. And if that’s not enough ‘outside the browser’ implementations, Node.js servers can even be found in aircraft!
I previously mentioned VR and with three.js’s extra StereoEffect.js module it’s relatively simple to get browser 3D goodness to be Google Cardboard-ready, and thus set the stage for all things JavaScript and VR. It’s been pretty popular in the art world too, with interactive works such as Seb Lee-Delisle’s Lunar Trails installation, featuring the old arcade game Lunar Lander, which you can now play in your browser while others watch (it is the web after all). The Science Museum in London held Chrome Web Lab, an interactive exhibition featuring five experiments, showcasing the magic of the web. And it’s not even the connectivity of the web that’s being showcased; we can even take things offline and use web code for amazing things, such as fighting Ebola.
One thing is for sure, JavaScript is awesome. Hell, if you believe those telly programs (as we all do), JavaScript can even take down the stock market, purely through the witchcraft of canvas! Go JavaScript!
Now it’s our turn
So I wanted to create a little project influenced by this theme, and as it’s Christmas, take it to the streets for a little bit of party fun! Something that could take code anywhere. Here’s how I made a portable visual projection pack, a piece of video mixing software and created some web-coded street art.
Step one: The equipment
You will need:
One laptop: with HDMI output and a modern browser installed, such as Google Chrome.
One battery-powered mini projector: I’ve used a Texas Instruments DLP; for its 120 lumens it was the best cost-to-lumens ratio I could find.
One MIDI controller (optional): mine is an ICON iDJ as it suits mixing visuals. However, there is more affordable hardware on the market such as an Akai LPD8 or a Korg nanoPAD2. As you’ll see in the article, this is optional as it can be emulated within the software.
A case to carry it all around in.
Step two: The software
The projected visuals, I imagined, could be anything you can create within a browser, whether that be simple HTML and CSS, images, videos, SVG or canvas. The only requirement I have is that they move or change with sound and that I can mix any one visual into another.
You may remember a couple of years ago I created a demo on this very site, allowing audio-triggered visuals from the ambient sounds your device mic was picking up. That was a great starting point – I used that exact method to pick up the audio and thus the first requirement was complete. If you want to see some more examples of visuals I’ve put together for this, there’s a showcase on CodePen.
The second requirement took a little more thought. I needed two screens, which could at any point show any of the visuals I had coded, but could be mixed from one into the other and back again. So let’s start with two divs, both absolutely positioned so they’re on top of each other, but at the start the second screen’s opacity is set to zero.
Now all we need is a slider, which when moved from one side to the other slowly sets the second screen’s opacity to 1, thereby fading it in.
See the Pen Mixing Screens (Software Version) by Rumyra (@Rumyra) on CodePen.
Mixing Screens (CodePen)
As you saw above, I have a MIDI controller and although the software method works great, I’d quite like to make use of this nifty piece of kit. That’s easily done with the Web MIDI API. All I need to do is call it, and when I move one of the sliders on the controller (I’ve allocated the big cross fader in the middle for this), pick up on the change of value and use that to control the opacity instead.
var midi, data;
// start talking to MIDI controller
if (navigator.requestMIDIAccess) {
navigator.requestMIDIAccess({
sysex: false
}).then(onMIDISuccess, onMIDIFailure);
} else {
alert(“No MIDI support in your browser.”);
}
// on success
function onMIDISuccess(midiData) {
// this is all our MIDI data
midi = midiData;
var allInputs = midi.allInputs.values();
// loop over all available inputs and listen for any MIDI input
for (var input = allInputs.next(); input && !input.done; input = allInputs.next()) {
// when a MIDI value is received call the onMIDIMessage function
input.value.onmidimessage = onMIDIMessage;
}
}
function onMIDIMessage(message) {
// data comes in the form [command/channel, note, velocity]
data = message.data;
// Opacity change for screen. The cross fader values are [176, 8, {0-127}]
if ( (data[0] === 176) && (data[1] === 8) ) {
// this value will change as the fader is moved
var opacity = data[2]/127;
screenTwo.style.opacity = opacity;
}
}
The final code was slightly more complicated than this, as I decided to switch the two screens based on the frequencies of the sound that was playing, and use the cross fader to depict the frequency threshold value. This meant they flickered in and out of each other, rather than just faded. There’s a very rough-and-ready first version of the software on GitHub.
Phew, Great! Now we need to get all this to the streets!
Step three: Portable kit
Did you notice how I mentioned a case to carry it all around in? I wanted the case to be morphable, so I could use the equipment from it too, a sort of bag-to-usherette-tray-type affair. Well, I had an unused laptop bag…
I strengthened it with some MDF, so when I opened the bag it would hold like a tray where the laptop and MIDI controller would sit. The projector was Velcroed to the external pocket of the bag, so when it was a tray it would project from underneath. I added two durable straps, one for my shoulders and one round my waist, both attached to the bag itself. There was a lot of cutting and trimming. As it was a laptop bag it was pretty thick to start and sewing was tricky. However, I only broke one sewing machine needle; I’ve been known to break more working with leather, so I figured I was doing well. By the way, you can actually buy usherette trays, but I just couldn’t resist hacking my own :)
Step four: Take to the streets
First, make sure everything is charged – everything – a lot! The laptop has to power both the MIDI controller and the projector, and although I have a mobile phone battery booster pack, that’ll only charge the projector should it run out. I estimated I could get a good hour of visual artistry before I needed to worry, though.
I had a couple of ideas about time of day and location. Here in the UK at this time of year, it gets dark around half past four, so I could easily head out in a city around 5pm and it would be dark enough for the projections to be seen pretty well. I chose Bristol, around the waterfront, as there were some interesting locations to try it out in. The best was Millennium Square: busy but not crowded and plenty of surfaces to try projecting on to.
My first time out with the portable audio/visual pack (PAVP as it will now be named) was brilliant. I played music and projected visuals, like a one-woman band of A/V!
You might be thinking what the point of this was, besides, of course, it being a bit of fun. Well, this project got me to look at canvas and SVG more closely. The Web MIDI API was really interesting; MIDI as a data format has some great practical uses. I think without our side projects we may not have all these wonderful uses for our everyday code. Not only do they remind us coding can, and should, be fun, they also help us learn and grow as makers.
My favourite part? When I was projecting into a water feature in Millennium Square. For those who are familiar, you’ll know it’s like a wall of water so it produced a superb effect. I drew quite a crowd and a kid came to stand next to me and all I could hear him say with enthusiasm was, ‘Oh wow! That’s so cool!’
Yes… yes, kid, it was cool. Making things with code is cool.
Massive thanks to the lovely Drew McLellan for his incredibly well-directed photography, and also Simon Johnson who took a great hand in perfecting the kit while it was attached. |
2015 |
Ruth John |
ruthjohn |
2015-12-06T00:00:00+00:00 |
https://24ways.org/2015/bringing-your-code-to-the-streets/ |
code |
| 71 |
Upping Your Web Security Game |
When I started working in web security fifteen years ago, web development looked very different. The few non-static web applications were built using a waterfall process and shipped quarterly at best, making it possible to add security audits before every release; applications were deployed exclusively on in-house servers, allowing Info Sec to inspect their configuration and setup; and the few third-party components used came from a small set of well-known and trusted providers. And yet, even with these favourable conditions, security teams were quickly overwhelmed and called for developers to build security in.
If the web security game was hard to win before, it’s doomed to fail now. In today’s web development, every other page is an application, accepting inputs and private data from users; software is built continuously, designed to eliminate manual gates, including security gates; infrastructure is code, with servers spawned with little effort and even less security scrutiny; and most of the code in a typical application is third-party code, pulled in through open source repositories with rarely a glance at who provided them.
Security teams, when they exist at all, cannot solve this problem. They are vastly outnumbered by developers, and cannot keep up with the application’s pace of change. For us to have a shot at making the web secure, we must bring security into the core. We need to give it no less attention than that we give browser compatibility, mobile design or web page load times. More broadly, we should see security as an aspect of quality, expecting both ourselves and our peers to address it, and taking pride when we do it well.
Where To Start?
Embracing security isn’t something you do overnight.
A good place to start is by reviewing things you’re already doing – and trying to make them more secure. Here are three concrete steps you can take to get going.
HTTPS
Threats begin when your system interacts with the outside world, which often means HTTP. As is, HTTP is painfully insecure, allowing attackers to easily steal and manipulate data going to or from the server. HTTPS adds a layer of crypto that ensures the parties know who they’re talking to, and that the information exchanged can be neither modified nor sniffed.
HTTPS is relevant to any site. If your non-HTTPS site holds opinions, reading it may get your users in trouble with employers or governments. If your users believe what you say, attackers can modify your non-HTTPS to take advantage of and abuse that trust. If you want to use new browser technologies like HTTP2 and service workers, your site will need to be HTTPS. And if you want to be discovered on the web, using HTTPS can help your Google ranking. For more details on why I think you should make the switch to HTTPS, check out this post, these slides and this video.
Using HTTPS is becoming easier and cheaper. Here are a few free tools that can help:
Get free and easy HTTPS delivery from Cloudflare (be sure to use “Full SSL”!)
Get a free and automation-friendly certificate from Let’s Encrypt (now in open beta).
Test how well your HTTPS is set up using SSLTest.
Other vendors and platforms are rapidly simplifying and reducing the cost of their HTTPS offering, as demand and importance grows.
Two-Factor Authentication
The most sensitive data is usually stored behind a login, and the authentication process is the primary gate in front of this data. Making this process secure has many aspects, including using HTTPS when accepting credentials, having a strong password policy, never storing the password, and more.
All of these are important, but the best single step to boost your authentication security is to introduce two-factor authentication (2FA). Adding 2FA usually means prompting users for an additional one-time code when logging in, which they get via SMS or a mobile app (e.g. Google Authenticator). This code is short-lived and is extremely hard for a remote attacker to guess, thus vastly reducing the risk a leaked or easily guessed password presents.
The typical algorithm for 2FA is based on an IETF standard called the time-based one-time password (TOTP) algorithm, and it isn’t that hard to implement. Joel Franusic wrote a great post on implementing 2FA; modules like speakeasy make it even easier; and you can swap SMS with Google Authenticator or your own app if you prefer. If you don’t want to build 2FA support yourself, you can purchase two/multi-factor authentication services from vendors such as DuoSecurity, Auth0, Clef, Hypr and others.
If implementing 2FA still feels like too much work, you can also choose to offload your entire authentication process to an OAuth-based federated login. Many companies offer this today, including Facebook, Google, Twitter, GitHub and others. These bigger players tend to do authentication well and support 2FA, but you should consider what data you’re sharing with them in the process.
Tracking Known Vulnerabilities
Most of the code in a modern application was actually written by third parties, and pulled into your app as frameworks, modules and libraries. While using these components makes us much more productive, along with their functionality we also adopt their security flaws. To make things worse, some of these flaws are well-known vulnerabilities, making it easy for hackers to take advantage of them in an attack.
This is a real problem and happens on pretty much every platform. Do you develop in Java? In 2014, over 6% of Java modules downloaded from Maven had a known severe security issue, the typical Java applications containing 24 flaws. Are you coding in Node.js? Roughly 14% of npm packages carry a known vulnerability, and over 60% of dev shops find vulnerabilities in their code. 30% of Docker Hub containers include a high priority known security hole, and 60% of the top 100,000 websites use client-side libraries with known security gaps.
To find known security issues, take stock of your dependencies and match them against language-specific lists such as Snyk’s vulnerability DB for Node.js, rubysec for Ruby, victims-db for Python and OWASP’s Dependency Check for Java. Once found, you can fix most issues by upgrading the component in question, though that may be tricky for indirect dependencies.
This process is still way too painful, which means most teams don’t do it. The Snyk team and I are hoping to change that by making it as easy as possible to find, fix and monitor known vulnerabilities in your dependencies. Snyk’s wizard will help you find and fix these issues through guided upgrades and patches, and adding Snyk’s test to your continuous integration and deployment (CI/CD) will help you stay secure as your code evolves.
Note that newly disclosed vulnerabilities usually impact old code – the one you’re running in production. This means you have to stay alert when new vulnerabilities are disclosed, so you can fix them before attackers can exploit them. You can do so by subscribing to vulnerability lists like US-CERT, OSVDB and NVD. Snyk’s monitor will proactively let you know about new disclosures relevant to your code, but only for Node.js for now – you can register to get updated when we expand.
Securing Yourself
In addition to making your application secure, you should make the contributors to that application secure – including you. Earlier this year we’ve seen attackers target mobile app developers with a malicious Xcode. The real target, however, wasn’t these developers, but rather the users of the apps they create. That you create. Securing your own work environment is a key part of keeping your apps secure, and your users from being compromised.
There’s no single step that will make you fully secure, but here are a few steps that can make a big impact:
Use 2FA on all the services related to the application, notably source control (e.g. GitHub), cloud platform (e.g. AWS), CI/CD, CDN, DNS provider and domain registrar. If an attacker compromises any one of those, they could modify or replace your entire application. I’d recommend using 2FA on all your personal services too.
Use a password manager (e.g. 1Password, LastPass) to ensure you have a separate and complex password for each service. Some of these services will get hacked, and passwords will leak. When that happens, don’t let the attackers access your other systems too.
Secure your workstation. Be careful what you download, lock your screen when you walk away, change default passwords on services you install, run antivirus software, etc. Malware on your machine can translate to malware in your applications.
Be very wary of phishing. Smart attackers use ‘spear phishing’ techniques to gain access to specific systems, and can trick even security savvy users. There are even phishing scams targeting users with 2FA. Be alert to phishy emails.
Don’t install things through curl <somewhere-on-the-web> | sudo bash, especially if the URL is on GitHub, meaning someone else controls it. Don’t do it on your machines, and definitely don’t do it in your CI/CD systems. Seriously.
Staying secure should be important to you personally, but it’s doubly important when you have privileged access to an application. Such access makes you a way to reach many more users, and therefore a more compelling target for bad actors.
A Culture of Security
Using HTTPS, enabling two-factor authentication and fixing known vulnerabilities are significant steps in building security at your core. As you implement them, remember that these are just a few steps in a longer journey.
The end goal is to embrace security as an aspect of quality, and accept we all share the responsibility of keeping ourselves – and our users – safe. |
2015 |
Guy Podjarny |
guypodjarny |
2015-12-11T00:00:00+00:00 |
https://24ways.org/2015/upping-your-web-security-game/ |
code |
| 75 |
A Harder-Working Class |
Class is only becoming more important. Focusing on its original definition as an attribute for grouping (or classifying) as well as linking HTML to CSS, recent front-end development practices are emphasizing class as a vessel for structured, modularized style packages. These patterns reduce the need for repetitive declarations that can seriously bloat file sizes, and instil human-readable understanding of how the interface, layout, and aesthetics are constructed.
In the next handful of paragraphs, we will look at how these emerging practices – such as object-oriented CSS and SMACSS – are pushing the relevance of class. We will also explore how HTML and CSS architecture can be further simplified, performance can be boosted, and CSS utility sharpened by combining class with the attribute selector.
A primer on attribute selectors
While attribute selectors were introduced in the CSS 2 spec, they are still considered rather exotic. These well-established and well-supported features give us vastly improved flexibility in targeting elements in CSS, and offer us opportunities for smarter markup. With an attribute selector, you can directly style an element based on any of its unique – or uniquely shared – attributes, without the need for an ID or extra classes. Unlike pseudo-classes, pseudo-elements, and other exciting features of CSS3, attribute selectors do not require any browser-specific syntax or prefix, and are even supported in Internet Explorer 7.
For example, say we want to target all anchor tags on a page that link to our homepage. Where otherwise we might need to manually identify and add classes to the HTML for these specific links, we could simply write:
[href=index.html] { }
This selector reads: target every element that has an href attribute of “index.html”.
Attribute selectors are more faceted, though, as they also give us some very simple regular expression-like logic that helps further narrow (or widen) a selector’s scope. In our previous example, what if we wanted to also give indicative styles to any anchor tag linking to an external site? With no way to know what the exact href value would be for every external link, we need to use an expression to match a common aspect of those links. In this case, we know that all external links need to start with “http”, so we can use that as a hook:
[href^=http] { }
The selector here reads: target every element that has an href attribute that begins with “http” (which will also include “https”). The ^= means “starts with”. There are a few other simple expressions that give us a lot of flexibility in targeting elements, and I have found that a deep understanding of these and other selector types to be very useful.
The class-attribute selector
By matching classes with the attribute selector, CSS can be pushed to accomplish some exciting new feats. What I call a class-attribute selector combines the advantages of classes with attribute selectors by targeting the class attribute, rather than a specific class. Instead of selecting .urgent, you could select [class*=urgent]. The latter may seem like a more verbose way of accomplishing the former, but each would actually match two subtly different groups of elements.
Eric Meyer first explored the possibility of using classes with attribute selectors over a decade ago. While his interest in this technique mostly explored the different facets of the syntax, I have found that using class-attribute selectors can have distinct advantages over either using an attribute selector or a straightforward class selector.
First, let’s explore some of the subtleties of why we would target class before other attributes:
Classes are ubiquitous. They have been supported since the HTML 4 spec was released in 1999. Newer attributes, such as the custom data attribute, have only recently begun to be adopted by browsers.
Classes have multiple ways of being targeted. You can use the class selector or attribute selector (.classname or [class=classname]), allowing more flexible specificity than resorting to an ID or !important.
Classes are already widely used, so adding more classes will usually require less markup than adding more attributes.
Classes were designed to abstractly group and specify elements, making them the most appropriate attribute for styling using object-oriented methods (as we will learn in a moment).
Also, as Meyer pointed out, we can use the class-attribute selector to be more strict about class declarations. Of these two elements:
<h2 class="very urgent">
<h2 class="urgent">
…only the second h2 would be selected by [class=urgent], while .urgent would select both. The use of = matches any element with the exact class value of “urgent”. Eric explores these nuances further in his series on attribute selectors, but perhaps more dramatic is the added power that class-attribute selectors can bring to our CSS.
More object-oriented, more scalable and modular
Nicole Sullivan has been pushing abstracted, object-oriented thinking in CSS development for years now. She has shared stacks of knowledge on how behemoth sites have seen impressive gains in maintenance overhead and CSS file sizes by leaning heavier on classes derived from common patterns. Jonathan Snook also speaks, writes and is genuinely passionate about improving our markup by using more stratified and modular class name conventions. With SMACSS, he shows this to be highly useful across sites – both complex and simple – that exhibit repeated design patterns. Sullivan and Snook both push the use of class for styling over other attributes, and many front-end developers are fast advocating such thinking as best practice.
With class-attribute selectors, we can further abstract our CSS, pushing its scalability. In his chapter on modules, Snook gives the example of a .pod class that might represent a certain set of styles. A .pod style set might be used in varying contexts, leading to CSS that might normally look like this:
.pod { }
form .pod { }
aside .pod { }
According to Snook, we can make these styles more portable by targeting more verbose classes, rather than context:
.pod { }
.pod-form { }
.pod-sidebar { }
…resulting in the following HTML:
<div class="pod">
<div class="pod pod-form">
<div class="pod pod-sidebar">
This divorces the <div>’s styles from its context, making it applicable to any situation in which it is needed. The markup is clean and portable, and the classes are imbued with meaning as to what module they belong to.
Using class-attribute selectors, we can simplify this further:
[class*=pod] { }
.pod-form { }
.pod-sidebar { }
The *= tells the browser to look for any element with a class attribute containing “pod”, so it matches “pod”, “pod-form”, “pod-sidebar”, etc. This allows only one class per element, resulting in simpler HTML:
<div class="pod">
<div class="pod-form">
<div class="pod-sidebar">
We could further abstract the concept of “form” and “sidebar” adjustments if we knew that each of those alterations would always need the same treatment.
/* Modules */
[class*=pod] { }
[class*=btn] { }
/* Alterations */
[class*=-form] { }
[class*=-sidebar] { }
In this case, all elements with classes appended “-form” or “-sidebar” would be altered in the same manner, allowing the markup to stay simple:
<form>
<h2 class="pod-form">
<a class="btn-form" href="#">
<aside>
<h2 class="pod-sidebar">
<a class="btn-sidebar" href="#">
50+ shades of specificity
Classes are just powerful enough to override element selectors and default styling, but still leave room to be trumped by IDs and !important styles. This makes them more suitable for object-oriented patterns and helps avoid messy specificity issues that can not only be a pain for developers to maintain, but can also affect a site’s performance. As Sullivan notes, “In almost every case, classes work well and have fewer unintended consequences than either IDs or element selectors”. Proper use of specificity and cascade is crucial in building straightforward, efficient CSS.
One interesting aspect of attribute selectors is that they can be compounded for increasing levels of specificity. Attribute selectors are assigned a specificity level of ten, the same as class selectors, but both class and attribute selectors can be chained together, giving them more and more specificity with each link. Some examples:
.box { }
/* Specificity of 10 */
.box.promo { }
/* Specificity of 20 */
[class*=box] { }
/* Specificity of 10 */
[class*=box][class*=promo] { }
/* Specificity of 20 */
You can chain both types together, too:
.box[class*=promo] { }
/* Specificity of 20 */
I was amused to find, though, that you can chain the exact same class and attribute selectors for infinite levels of specificity
.box { }
/* Specificity of 10 */
.box.box { }
/* Specificity of 20 */
.box.box.box { }
/* Specificity of 30 */
[class*=box] { }
/* Specificity of 10 */
[class*=box][class*=box] { }
/* Specificity of 20 */
[class*=box][class*=box][class*=box] { }
/* Specificity of 30 */
.box[class*=box].box[class*=box] { }
/* Specificity of 40 */
To override .box styles for promo, we wouldn’t need to add an ID, change the order of .promo and .box in the CSS, or resort to an !important style. Granted, any issue that might need this fine level of specificity tweaking could probably be better solved with clever cascades, but having options never hurts.
Smarter CSS
One of the most powerful aspects of the class-attribute selector is its ability to expand the simple logic found in CSS. When developing Gridset (an online tool for building grids and outputting them as CSS), I realized that with the right class name conventions, class-attribute selectors would allow the CSS to be smart enough to automatically adjust for column offsets without the need for extra classes. This imbued the CSS output with logic that other frameworks lacked, and makes a developer’s job much easier.
Say you need an element that spans column five (c5) to column six (c6) on your grid, and is preceded by an element spanning column one (c1) to column three (c3). The CSS can anticipate such a scenario:
.c1-c3 + .c5-c6 {
margin-left: 25%; /* …or the width of column four plus two gutter widths */
}
…but to accommodate all of the margin offsets that could span that same gap, we would need to write a rather protracted list for just a six column grid:
.c1-c3 + .c5-c6,
.c1-c3 + .c5,
.c2-c3 + .c5-c6,
.c2-c3 + .c5,
.c3 + .c5-c6,
.c3 + .c5 {
margin-left: 25%;
}
Now imagine how the verbosity compounds when we repeat this type of declaration for every possible margin in a grid. The more columns added to the grid, the longer this selector list would get, too, making the CSS harder for the developer to maintain and slowing the load time. Using class-attribute selectors, though, this can be much simpler:
[class*=c3] + [class*=c5] {
margin-left: 25%;
}
I’ve detailed how we extract as much logic as possible from as little CSS as needed on the Gridset blog.
More flexible selectors
In a recent project, I was working with Drupal-generated classes to change styles for certain special pages on a site. Without being able to change the code base, I was left trying to find some specific aspect of the generated HTML to target. I noticed that every special page was given a prefixed class, unique to the page, resulting in CSS like this:
.specialpage-about,
.specialpage-contact,
.specialpage-info,
…
…and the list kept growing with each new special page. Such bloat would lead to problems down the line, and add development overhead to editorial decisions, which was a situation we were trying to avoid. I was easily able to fix this, though, with a concise class-attribute selector:
[class*=specialpage-]
The CSS was now flexible enough to accommodate both the editorial needs of the client, and the development restrictions of the CMS.
Selector performance
As Snook tells us in his chapter on Selector Performance, selectors are read by the browser from right to left, matching every element that adheres to each rule (or part of the selector). The more specific we can make the right-most rules – and every other part of your selectors – the more performant your CSS will be. So this selector:
.home-page .promo .main-header
…would be more performant than:
.home-page div header
…because there are likely many more header and div elements on the page, but not so many elements with those specific classes.
Now, the class-attribute selector could be more general than a class selector, but not by much. I ran numerous tests based on the work of Steve Souders (and a few others) to test a class-attribute selector against a normal class selector. Given that Javascript will freeze during style rendering, I created a script that will add, then remove, a stylesheet on a page 5000 times, and measure only the time that elapses during the rendering freeze. The script runs four tests, essentially: one where a class selector and class-attribute Selector match a single element, and one they match multiple elements on the page.
After running the test over 100 times and averaging the results, I have not seen a significant difference in rendering times. (As of this writing, the class-attribute selector has been 0.398% slower on average.) View the results here.
Given the sheer amount of bytes potentially saved by reducing selector lists, though, I am confident class-attribute selectors could shorten load times on larger sites and, at the very least, save precious development time.
Conclusion
With its flexibility and broad remit, class has at times been derided as too lenient, allowing CMSes and lazy developers to fill its values with presentational hacks or verbose gibberish. There have even been calls for an early retirement. Class continues, though, to be one of our most crucial tools.
Front-end developers are rightfully eager to expand production abilities through innovations such as Sass or LESS, but this should not preclude us from honing the tools we already know as well. Every technique demonstrated in this article was achievable over a decade ago and most of the same thinking could be applied to IDs, rels, or any other attribute (though the reasons listed above give class an edge). The recent advent of methods such as object-oriented CSS and SMACSS shows there is still much room left to expand what simple HTML and CSS can accomplish. Progress may not always be found in the innovation of our tools, but through sharpening our understanding of them. |
2012 |
Nathan Ford |
nathanford |
2012-12-15T00:00:00+00:00 |
https://24ways.org/2012/a-harder-working-class/ |
code |
| 76 |
Giving CSS Animations and Transitions Their Place |
CSS animations and transitions may not sit squarely in the realm of the behaviour layer, but they’re stepping up into this area that used to be pure JavaScript territory. Heck, CSS might even perform better than its JavaScript equivalents in some cases. That’s pretty serious! With CSS’s new tricks blurring the lines between presentation and behaviour, it can start to feel bloated and messy in our CSS files. It’s an uncomfortable feeling.
Here are a pair of methods I’ve found to be pretty helpful in keeping the potential bloat and wire-crossing under control when CSS has its hands in both presentation and behaviour.
Same eggs, more baskets
Structuring your CSS to have separate files for layout, typography, grids, and so on is a fairly common approach these days. But which one do you put your transitions and animations in? The initial answer, as always, is “it depends”.
Small effects here and there will likely sit just fine with your other styles. When you move into more involved effects that require multiple animations and some logic support from JavaScript, it’s probably time to choose none of the above, and create a separate CSS file just for them.
Putting all your animations in one file is a huge help for code organization. Even if you opt for a name less literal than animations.css, you’ll know exactly where to go for anything CSS animation related. That saves time and effort when it comes to editing and maintenance. Keeping track of which animations are still currently used is easier when they’re all grouped together as well. And as an added bonus, you won’t have to look at all those horribly unattractive and repetitive prefixed @-keyframe rules unless you actually need to.
An animations.css file might look something like the snippet below. It defines each animation’s keyframes and defines a class for each variation of that animation you’ll be using. Depending on the situation, you may also want to include transitions here in a similar way. (I’ve found defining transitions as their own class, or mixin, to be a huge help in past projects for me.)
// defining the animation
@keyframes catFall {
from { background-position: center 0;}
to {background-position: center 1000px;}
}
@-webkit-keyframes catFall {
from { background-position: center 0;}
to {background-position: center 1000px;}
}
@-moz-keyframes catFall {
from { background-position: center 0;}
to {background-position: center 1000px;}
}
@-ms-keyframes catFall {
from { background-position: center 0;}
to {background-position: center 1000px;}
}
…
// class that assigns the animation
.catsBackground {
height: 100%;
background: transparent url(../endlessKittens.png) 0 0 repeat-y;
animation: catFall 1s linear infinite;
-webkit-animation: catFall 1s linear infinite;
-moz-animation: catFall 1s linear infinite;
-ms-animation: catFall 1s linear infinite;
}
If we don’t need it, why load it?
Having all those CSS animations and transitions in one file gives us the added flexibility to load them only when we want to. Loading a whole lot of things that will never be used might seem like a bit of a waste.
While CSS has us impressed with its motion chops, it falls flat when it comes to the logic and fine-grained control. JavaScript, on the other hand, is pretty good at both those things. Chances are the content of your animations.css file isn’t acting alone. You’ll likely be adding and removing classes via JavaScript to manage your CSS animations at the very least. If your CSS animations are so entwined with JavaScript, why not let them hang out with the rest of the behaviour layer and only come out to play when JavaScript is supported?
Dynamically linking your animations.css file like this means it will be completely ignored if JavaScript is off or not supported. No JavaScript? No additional behaviour, not even the parts handled by CSS.
<script>
document.write('<link rel="stylesheet" type="text/css" href="animations.css">');
</script>
This technique comes up in progressive enhancement techniques as well, but it can help here to keep your presentation and behaviour nicely separated when more than one language is involved. The aim in both cases is to avoid loading files we won’t be using.
If you happen to be doing something a bit fancier – like 3-D transforms or critical animations that require more nuanced fallbacks – you might need something like modernizr to step in to determine support more specifically. But the general idea is the same.
Summing it all up
Using a couple of simple techniques like these, we get to pick where to best draw the line between behaviour and presentation based on the situation at hand, not just on what language we’re using. The power of when to separate and how to reassemble the individual pieces can be even greater if you use preprocessors as part of your process. We’ve got a lot of options! The important part is to make forward-thinking choices to save your future self, and even your current self, unnecessary headaches. |
2012 |
Val Head |
valhead |
2012-12-08T00:00:00+00:00 |
https://24ways.org/2012/giving-css-animations-and-transitions-their-place/ |
code |
| 79 |
Responsive Images: What We Thought We Needed |
If you were to read a web designer’s Christmas wish list, it would likely include a solution for displaying images responsively. For those concerned about users downloading unnecessary image data, or serving images that look blurry on high resolution displays, finding a solution has become a frustrating quest.
Having experimented with complex and sometimes devilish hacks, consensus is forming around defining new standards that could solve this problem. Two approaches have emerged.
The <picture> element markup pattern was proposed by Mat Marquis and is now being developed by the Responsive Images Community Group. By providing a means of declaring multiple sources, authors could use media queries to control which version of an image is displayed and under what conditions:
<picture width="500" height="500">
<source media="(min-width: 45em)" src="large.jpg">
<source media="(min-width: 18em)" src="med.jpg">
<source src="small.jpg">
<img src="small.jpg" alt="">
<p>Accessible text</p>
</picture>
A second proposal put forward by Apple, the srcset attribute, uses a more concise syntax intended for use with the <img> element, although it could be compatible with the <picture> element too. This would allow authors to provide a set of images, but with the decision on which to use left to the browser:
<img src="fallback.jpg" alt="" srcset="small.jpg 640w 1x, small-hd.jpg 640w 2x, med.jpg 1x, med-hd.jpg 2x ">
Enter Scrooge
Men’s courses will foreshadow certain ends, to which, if persevered in, they must lead.
Ebenezer Scrooge
Given the complexity of this issue, there’s a heated debate about which is the best option. Yet code belies a certain truth. That both feature verbose and opaque syntax, I’m not sure either should find its way into the browser – especially as alternative approaches have yet to be fully explored.
So, as if to dampen the festive cheer, here are five reasons why I believe both proposals are largely redundant.
1. We need better formats, not more markup
As we move away from designs defined with fixed pixel values, bitmap images look increasingly unsuitable. While simple images and iconography can use scalable vector formats like SVG, for detailed photographic imagery, raster formats like GIF, PNG and JPEG remain the only suitable option.
There is scope within current formats to account for varying bandwidth but this requires cooperation from browser vendors. Newer formats like JPEG2000 and WebP generate higher quality images with smaller file sizes, but aren’t widely supported.
While it’s tempting to try to solve this issue by inventing new markup, the crux of it remains at the file level.
Daan Jobsis’s experimentation with image compression strengthens this argument. He discovered that by increasing the dimensions of a JPEG image while simultaneously reducing its quality, a smaller files could be produced, with the resulting image looking just as good on both standard and high-resolution displays.
This may be a hack in lieu of a more permanent solution, but it’s applied in the right place. Easy to accomplish with existing tools and without compatibility issues, it has few downsides. Further experimentation in this area should be encouraged, with standardisation efforts more helpful if focused on developing new image formats or, preferably, extending existing ones.
2. Art direction doesn’t belong in markup
A desired benefit of the <picture> markup pattern is to allow for greater art direction. For example, rather than scaling down images on smaller displays to the point that their content is hard to discern, we could present closer crops instead:
This can be achieved with CSS of course, although with a download penalty for those parts of an image not shown. This point may be negligible, however, since in the context of adaptable layouts, these hidden areas may end up being revealed anyway.
Art direction concerns design, not content. If we wish to maintain a separation of concerns, including presentation within our markup seems misguided.
3. The size of a display has little relation to the size of an image
By using media queries, the <picture> element allows authors to choose which characteristics of the screen or viewport to query for different images to be displayed.
In developing sites at Clearleft, we have noticed that the viewport is essentially arbitrary, with the size of an image’s containing element more important. For example, look at how this grid of images may adapt at different viewport widths:
As we build more modular systems, components need to be adaptable in and of themselves. There is a case to be made for developing more contextual methods of querying, rather than those based on attributes of the display.
4. We haven’t lived with the problem long enough
A key strength of the web is that the underlying platform can be continually iterated. This can also be problematic if snap judgements are made about what constitutes an improvement.
The early history of the web is littered with such examples, be it the perceived need for blinking text or inline typographic styling. To build a platform for the future, additions to it should be carefully considered. And if we want more consistent support across browsers, burdening vendors with an ever increasing list of features seems counterproductive.
Only once the need for a new feature is sufficiently proven, should we look to standardise it. Before we could declare hover effects, rounded corners and typographic styling in CSS, we used JavaScript as a polyfill. Sure, doing so was painful, but use cases were fully explored, and the CSS specification better reflected the needs of authors.
5. Images and the web aesthetic
The srcset proposal has emerged from a company that markets its phones as being able to browse the real – yet squashed down, tapped and zoomable – web. Perhaps Apple should make its own website responsive before suggesting how the rest of us should do so.
Converserly, while the <picture> proposal has the backing of a few respected developers and designers, it was born out of the work Mat Marquis and Filament Group did for the Boston Globe. As the first large-scale responsive design, this was a landmark project that ignited the responsive web design movement and proved its worth. But it was the first.
Its design shares a vernacular to that of contemporary newspaper websites, with a columnar, image-laden and densely packed layout. Compared to more recent examples – Quartz, The Next Web and the New York Times Skimmer – it feels out of step with the future direction of news sites. In seeking out a truer aesthetic for the web in which software interfaces have greater influence, we might discover that the need for responsive images isn’t as great as originally thought.
Building for the future
With responsive design, we’ve accepted the idea that a fully fluid layout, rather than a set of fixed layouts, is best suited to the web’s unpredictable nature. Current responsive image proposals are antithetical to this approach.
We need solutions that lack complexity, are device-agnostic and work within existing workflows. Any proposal that requires different versions of the same image to be created, is likely to have to acquiesce under the pressure of reality.
While it’s easy to get distracted about the size and quality of an image, and how we might choose to serve it, often the simplest solution is not to include it at all. After years of gluttonous design practice, in which fast connections and expansive display sizes were an accepted norm, we have got use to filling pages with needless images and countless items of page furniture.
To design more adaptable experiences, the presence of every element needs to be questioned, for its existence requires additional data to be downloaded or futher complexity within a design system. Conditional loading techniques mean that the inclusion of images is no longer a binary choice, but can instead appear in a progressively enhanced manner.
So here is my proposal. Instead of spending the next year worrying about responsive images, let’s embrace the constraints of the medium, and seek out new solutions that can work within them. |
2012 |
Paul Lloyd |
paulrobertlloyd |
2012-12-11T00:00:00+00:00 |
https://24ways.org/2012/responsive-images-what-we-thought-we-needed/ |
code |
| 80 |
HTML5 Video Bumpers |
Video is a bigger part of the web experience than ever before. With native browser support for HTML5 video elements freeing us from the tyranny of plugins, and the availability of faster internet connections to the workplace, home and mobile networks, it’s now pretty straightforward to publish video in a way that can be consumed in all sorts of ways on all sorts of different web devices.
I recently worked on a project where the client had shot some dedicated video shorts to publish on their site. They also had some five-second motion graphics produced to top and tail the videos with context and branding. This pretty common requirement is a great idea on the web, where a user might land at your video having followed a link and be viewing a page without much context.
Known as bumpers, these short introduction clips help brand a video and make it look a lot more professional.
Adding bumpers to a video
The simplest way to add bumpers to a video would be to edit them on to the start and end of the video file itself. Cooking the bumpers into the video file is easy, but should you ever want to update them it can become a real headache. If the branding needs updating, for example, you’d need to re-edit and re-encode all your videos. Not a fun task.
What if the bumpers could be added dynamically? That would enable you to use the same bumper for multiple videos (decreasing download time for users who might watch more than one) and to update the bumpers whenever you wanted. You could change them seasonally, update them for special promotions, run different advertising slots, perform multivariate testing, or even target different bumpers to different users.
The trade-off, of course, is that if you dynamically add your bumpers, there’s a chance that a user in a given circumstance might not see the bumper. For example, if the main video feature was uploaded to YouTube, you’d have no way to control the playback. As always, you need to weigh up the pros and cons and make your choice.
HTML5 bumpers
If you wanted to dynamically add bumpers to your HTML5 video, how would you go about it? That was the question I found myself needing to answer for this particular client project.
My initial thought was to treat it just like an image slideshow. If I were building a slideshow that moved between images, I’d use CSS absolute positioning with z-index to stack the images up on top of each other in a pile, with the first image on top. To transition to the second image, I’d use JavaScript to fade the top image out, revealing the second image beneath it.
Now that video is just a native object in the DOM, just like an image, why not do the same? Stack the videos up with the opening bumper on top, listen for the video’s onended event, and fade it out to reveal the main feature behind. Good idea, right?
Wrong
Remember that this is the web. It’s never going to be that easy. The problem here is that many non-desktop devices use native, dedicated video players. Think about watching a video on a mobile phone – when you play the video, the phone often goes full-screen in its native player, leaving the web page behind. There’s no opportunity to fade or switch z-index, as the video isn’t being viewed in the page. Your page is left powerless. Powerless!
So what can we do? What can we control?
Those of us with particularly long memories might recall a time before CSS, when we’d have to use JavaScript to perform image rollovers. As CSS background images weren’t a practical reality, we would use lots of <img> elements, and perform a rollover by modifying the src attribute of the image.
Turns out, this old trick of modifying the source can help us out with video, too. In most cases, modifying the src attribute of a <video> element, or perhaps more likely the src attribute of a source element, will swap from one video to another.
Swappin’ it
Let’s take a deliberately simple example of a super-basic video tag:
<video src="mycat.webm" controls>no fallback coz i is lame, innit.</video>
We could very simply write a script to find all video tags and give them a new src to show our bumper.
<script>
var videos, i, l;
videos = document.getElementsByTagName('video');
for(i=0, l=videos.length; i<l; i++) {
videos[i].setAttribute('src', 'bumper-in.webm');
}
</script>
View the example in a browser with WebM support. You’ll see that the video is swapped out for the opening bumper. Great!
Beefing it up
Of course, we can’t just publish video in one format. In practical use, you need a <video> element with multiple <source> elements containing your different source formats.
<video controls>
<source src="mycat.mp4" type="video/mp4" />
<source src="mycat.webm" type="video/webm" />
<source src="mycat.ogv" type="video/ogg" />
</video>
This time, our script needs to loop through the sources, not the videos. We’ll use a regular expression replacement to swap out the file name while maintaining the correct file extension.
<script>
var sources, i, l, orig;
sources = document.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('src');
sources[i].setAttribute('src', orig.replace(/(w+).(w+)/, 'bumper-in.$2'));
// reload the video
sources[i].parentNode.load();
}
</script>
The difference this time is that when changing the src of a <source> we need to call the .load() method on the video to get it to acknowledge the change.
See the code in action, this time in a wider range of browsers.
But, my video!
I guess we should get the original video playing again. Keeping the same markup, we need to modify the script to do two things:
Store the original src in a data- attribute so we can access it later
Add an event listener so we can detect the end of the bumper playing, and load the original video back in
As we need to loop through the videos this time to add the event listener, I’ve moved the .load() call into that loop. It’s a bit more efficient to call it only once after modifying all the video’s sources.
<script>
var videos, sources, i, l, orig;
sources = document.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('src');
sources[i].setAttribute('data-orig', orig);
sources[i].setAttribute('src', orig.replace(/(w+).(w+)/, 'bumper-in.$2'));
}
videos = document.getElementsByTagName('video');
for(i=0, l=videos.length; i<l; i++) {
videos[i].load();
videos[i].addEventListener('ended', function(){
sources = this.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('data-orig');
if (orig) {
sources[i].setAttribute('src', orig);
}
sources[i].setAttribute('data-orig','');
}
this.load();
this.play();
});
}
</script>
Again, view the example to see the bumper play, followed by our spectacular main feature. (That’s my cat, Widget. His interests include sleeping and internet marketing.)
Tidying things up
The final thing to do is add our closing bumper after the main video has played. This involves the following changes:
We need to keep track of whether the src has been changed, so we only play the video if it’s changed. I’ve added the modified variable to track this, and it stops us getting into a situation where the video just loops forever.
Add an else to the event listener, for when the orig is false (so the main feature has been playing) to load in the end bumper. We also check that we’re not already playing the end bumper. Because looping.
<script>
var videos, sources, i, l, orig, current, modified;
sources = document.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('src');
sources[i].setAttribute('data-orig', orig);
sources[i].setAttribute('src', orig.replace(/(w+).(w+)/, 'bumper-in.$2'));
}
videos = document.getElementsByTagName('video');
for(i=0, l=videos.length; i<l; i++) {
videos[i].load();
modified = false;
videos[i].addEventListener('ended', function(){
sources = this.getElementsByTagName('source');
for(i=0, l=sources.length; i<l; i++) {
orig = sources[i].getAttribute('data-orig');
if (orig) {
sources[i].setAttribute('src', orig);
modified = true;
}else{
current = sources[i].getAttribute('src');
if (current.indexOf('bumper-out')==-1) {
sources[i].setAttribute('src', current.replace(/([w]+).(w+)/, 'bumper-out.$2'));
modified = true;
}else{
this.pause();
modified = false;
}
}
sources[i].setAttribute('data-orig','');
}
if (modified) {
this.load();
this.play();
}
});
}
</script>
Yo ho ho, that’s a lot of JavaScript. See it in action – you should get a bumper, the cat video, and an end bumper.
Of course, this code works fine for demonstrating the principle, but it’s very procedural. Nothing wrong with that, but to do something similar in production, you’d probably want to make the code more modular to ease maintainability. Besides, you may want to use a framework, rather than basic JavaScript.
The end credits
One really important principle here is that of progressive enhancement. If the browser doesn’t support JavaScript, the user won’t see your bumper, but they will get the main video. If the browser supports JavaScript but doesn’t allow you to modify the src (as was the case with older versions of iOS), the user won’t see your bumper, but they will get the main video.
If a search engine or social media bot grabs your page and looks for content, they won’t see your bumper, but they will get the main video – which is absolutely what you want.
This means that if the bumper is absolutely crucial, you may still need to cook it into the video. However, for many applications, running it dynamically can work quite well.
As always, it comes down to three things:
Measure your audience: know how people access your site
Test the solution: make sure it works for your audience
Plan for failure: it’s the web and that’s how things work ‘round these parts
But most of all play around with it, have fun and build something awesome. |
2012 |
Drew McLellan |
drewmclellan |
2012-12-01T00:00:00+00:00 |
https://24ways.org/2012/html5-video-bumpers/ |
code |
| 83 |
Cut Copy Paste |
Long before I got into this design thing, I was heavily into making my own music inspired by the likes of Coldcut and Steinski. I would scour local second-hand record shops in search of obscure beats, loops and bits of dialogue in the hope of finding that killer sample I could then splice together with other things to make a huge hit that everyone would love. While it did eventually lead to a record contract and getting to release a few 12″ singles, ultimately I knew I’d have to look for something else to pay the bills.
I may not make my own records any more, but the approach I took back then – finding (even stealing) things, cutting and pasting them into interesting combinations – is still at the centre of how I work, only these days it’s pretty much bits of code rather than bits of vinyl. Over the years I’ve stored these little bits of code (some I’ve found, some I’ve created myself) in Evernote, ready to be dialled up whenever I need them.
So when Drew got in touch and asked if I’d like to do something for this year’s 24 ways I thought it might be kind of cool to share with you a few of these snippets that I find really useful. Think of these as a kind of coding mix tape; but remember – don’t just copy as is: play around, combine and remix them into other wonderful things.
Some of this stuff is dirty; some of it will make hardcore programmers feel ill. For those people, remember this – while you were complaining about the syntax, I made something.
Create unique colours
Let’s start right away with something I stole. Well, actually it was given away at the time by Matt Biddulph who was then at Dopplr before Nokia destroyed it. Imagine you have thousands of words and you want to assign each one a unique colour. Well, Matt came up with a crazily simple but effective way to do that using an MD5 hash. Just encode said word using an MD5 hash, then take the first six characters of the string you get back to create a hexadecimal colour representation.
I can’t guarantee that it will be a harmonious colour palette, but it’s still really useful. The thing I love the most about this technique is the left-field thinking of using an encryption system to create colours! Here’s an example using JavaScript:
// requires the MD5 library available at http://pajhome.org.uk/crypt/md5
function MD5Hex(str){
result = MD5.hex(str).substring(0, 6);
return result;
}
Make something breathe using a sine wave
I never paid attention in school, especially during double maths. As a matter of fact, the only time I received corporal punishment – several strokes of the ruler – was in maths class. Anyway, if they had shown me then how beautiful mathematics actually is, I might have paid more attention. Here’s a little example of how a sine wave can be used to make something appear to breathe.
I recently used this on an Arduino project where an LED ring surrounding a button would gently breathe. Because of that it felt much more inviting. I love mathematics.
for(int i = 0; i<360; i++){
float rad = DEG_TO_RAD * i;
int sinOut = constrain((sin(rad) * 128) + 128, 0, 255);
analogWrite(LED, sinOut);
delay(10);
}
Snap position to grid
This is so elegant I love it, and it was shown to me by Gary Burgess, or Boom Boom as myself and others like to call him. It snaps a position, in this case the X-position, to a grid. Just define your grid size (say, twenty pixels) and you’re good.
snappedXpos = floor( xPos / gridSize) * gridSize;
Calculate the distance between two objects
For me, interaction design is about the relationship between two objects: you and another object; you and another person; or simply one object to another. How close these two things are to each other can be a handy thing to know, allowing you to react to that information within your design. Here’s how to calculate the distance between two objects in a 2-D plane:
deltaX = round(p2.x-p1.x);
deltaY = round(p2.y-p1.y);
diff = round(sqrt((deltaX*deltaX)+(deltaY*deltaY)));
Find the X- and Y-position between two objects
What if you have two objects and you want to place something in-between them? A little bit of interruption and disruption can be a good thing. This small piece of code will allow you to place an object in-between two other objects:
// set the position: 0.5 = half-way
float position = 0.5;
float x = x1 + (x2 - x1) *position;
float y = y1 + (y2 - y1) *position;
Distribute objects equally around a circle
More fun with maths, this time adding cosine to our friend sine. Let’s say you want to create a circular navigation of arbitrary elements (yeah, Jakob, you heard), or you want to place images around a circle. Well, this piece of code will do just that. You can adjust the size of the circle by changing the distance variable and alter the number of objects with the numberOfObjects variable. Example below is for use in Processing.
// Example for Processing available for free download at processing.org
void setup() {
size(800,800);
int numberOfObjects = 12;
int distance = 100;
float inc = (TWO_PI)/numberOfObjects;
float x,y;
float a = 0;
for (int i=0; i < numberOfObjects; i++) {
x = (width/2) + sin(a)*distance;
y = (height/2) + cos(a)*distance;
ellipse(x,y,10,10);
a += inc;
}
}
Use modulus to make a grid
The modulus operator, represented by %, returns the remainder of a division. Fallen into a coma yet? Hold on a minute – this seemingly simple function is very powerful in lots of ways. At a simple level, you can use it to determine if a number is odd or even, great for creating alternate row colours in a table for instance:
boolean checkForEven(numberToCheck) {
if (numberToCheck % 2 == 0)
return true;
} else {
return false;
}
}
That’s all well and good, but here’s a use of modulus that might very well blow your mind. Construct a grid with only a few lines of code. Again the example is in Processing but can easily be ported to any other language.
void setup() {
size(600,600);
int numItems = 120;
int numOfColumns = 12;
int xSpacing = 40;
int ySpacing = 40;
int totalWidth = xSpacing*numOfColumns;
for (int i=0; i < numItems; i++) {
ellipse(floor((i*xSpacing)%totalWidth),floor((i*xSpacing)/totalWidth)*ySpacing,10,10);
}
}
Not all the bits of code I keep around are for actual graphical output. I also have things that are very utilitarian, but which I still consider part of the design process. Here’s a couple of things that I’ve found really handy lately in my design workflow. They may be a little specific, but I hope they demonstrate that it’s not about working harder, it’s about working smarter.
Merge CSV files into one file
Recently, I’ve had to work with huge – about 1GB – CSV text files that I then needed to combine into one master CSV file so I could then process the data. Opening up each text file and then copying and pasting just seemed really dumb, not to mention slow, so I thought there must be a better way. After some Googling I found this command line script that would combine .txt files into one file and add a new line after each:
awk 1 *.txt > finalfile.txt
But that wasn’t what I was ideally after. I wanted to merge the CSV files, keeping the first row of the first file (the column headings) and then ignore the first row of subsequent files. Sure enough I found the answer after some Googling and it worked like a charm. Apologies to the original author but I can’t remember where I found it, but you, sir or madam, are awesome. Save this as a shell script:
FIRST=
for FILE in *.csv
do
exec 5<"$FILE" # Open file
read LINE <&5 # Read first line
[ -z "$FIRST" ] && echo "$LINE" # Print it only from first file
FIRST="no"
cat <&5 # Print the rest directly to standard output
exec 5<&- # Close file
# Redirect stdout for this section into file.out
done > file.out
Create a symbolic link to another file or folder
Oftentimes, I’ll find myself hunting through a load of directories to load a file to be processed, like a CSV file. Use a symbolic link (in the Terminal) to place a link on your desktop or wherever is most convenient and it’ll save you loads of time. Especially great if you’re going through a Java file dialogue box in Processing or something that doesn’t allow the normal Mac dialog box or aliases.
cd /DirectoryYouWantShortcutToLiveIn
ln -s /Directory/You/Want/ShortcutTo/ TheShortcut
You can do it, in the mix
I hope you’ve found some of the above useful and that they’ve inspired a few ideas here and there. Feel free to tell me better ways of doing things or offer up any other handy pieces of code. Most of all though, collect, remix and combine the things you discover to make lovely new things. |
2012 |
Brendan Dawes |
brendandawes |
2012-12-17T00:00:00+00:00 |
https://24ways.org/2012/cut-copy-paste/ |
code |
| 86 |
Flashless Animation |
Animation in a Flashless world
When I splashed down in web design four years ago, the first thing I wanted to do was animate a cartoon in the browser. I’d been drawing comics for years, and I’ve wanted to see them come to life for nearly as long. Flash animation was still riding high, but I didn’t want to learn Flash. I wanted to learn JavaScript!
Sadly, animating with JavaScript was limiting and resource-intensive. My initial foray into an infinitely looping background did more to burn a hole in my CPU than amaze my friends (although it still looks pretty cool). And there was still no simple way to incorporate audio. The browser technology just wasn’t there.
Things are different now. CSS3 transitions and animations can do most of the heavy lifting and HTML5 audio can serve up the music and audio clips. You can do a lot without leaning on JavaScript at all, and when you lean on JavaScript, you can do so much more!
In this project, I’m going to show you how to animate a simple walk cycle with looping audio. I hope this will inspire you to do something really cool and impress your friends. I’d love to see what you come up with, so please send your creations my way at rachelnabors.com!
Note: Because every browser wants to use its own prefixes with CSS3 animations, and I have neither the time nor the space to write all of them out, I will use the W3C standard syntaxes; that is, going prefix-less. You can implement them out of the box with something like Prefixfree, or you can add prefixes on your own. If you take the latter route, I recommend using Sass and Compass so you can focus on your animations, not copying and pasting.
The walk cycle
Walk cycles are the “Hello world” of animation. One of the first projects of animation students is to spend hours drawing dozens of frames to complete a simple loopable animation of a character walking.
Most animators don’t have to draw every frame themselves, though. They draw a few key frames and send those on to production animators to work on the between frames (or tween frames). This is meticulous, grueling work requiring an eye for detail and natural movement. This is also why so much production animation gets shipped overseas where labor is cheaper.
Luckily, we don’t have to worry about our frame count because we can set our own frames-per-second rate on the fly in CSS3. Since we’re trying to impress friends, not animation directors, the inconsistency shouldn’t be a problem. (Unless your friend is an animation director.)
This is a simple walk cycle I made of my comic character Tuna for my CSS animation talk at CSS Dev Conference this year:
The magic lies here:
animation: walk-cycle 1s steps(12) infinite;
Breaking those properties down:
animation: <name> <duration> <timing-function> <iteration-count>;
walk-cycle is a simple @keyframes block that moves the background sprite on .tuna around:
@keyframes walk-cycle {
0% {background-position: 0 0; }
100% {background-position: 0 -2391px;}
}
The background sprite has exactly twelve images of Tuna that complete a full walk cycle. We’re setting it to cycle through the entire sprite every second, infinitely. So why isn’t the background image scrolling down the .tuna container? It’s all down to the timing function steps(). Using steps() let us tell the CSS to make jumps instead of the smooth transitions you’d get from something like linear. Chris Mills at dev.opera wrote in his excellent intro to CSS3 animation :
Instead of giving a smooth animation throughout, [steps()] causes the animation to jump between a set number of steps placed equally along the duration. For example, steps(10) would make the animation jump along in ten equal steps. There’s also an optional second parameter that takes a value of start or end. steps(10, start) would specify that the change in property value should happen at the start of each step, while steps(10, end) means the change would come at the end.
(Seriously, go read his full article. I’m not going to touch on half the stuff he does because I cannot improve on the basics any more than he already has.)
The background
A cat walking in a void is hardly an impressive animation and certainly your buddy one cube over could do it if he chopped up some of those cat GIFs he keeps using in group chat. So let’s add a parallax background! Yes, yes, all web designers signed a peace treaty to not abuse parallax anymore, but this is its true calling—treaty be damned.
And to think we used to need JavaScript to do this! It’s still pretty CPU intensive but much less complicated. We start by splitting up the page into different layers, .foreground, .midground, and .background. We put .tuna in the .midground.
.background has multiple background images, all set to repeat horizontally:
background-image:
url(background_mountain5.png),
url(background_mountain4.png),
url(background_mountain3.png),
url(background_mountain2.png),
url(background_mountain1.png);
background-repeat: repeat-x;
With parallax, things in the foreground move faster than those in the background. Next time you’re driving, notice how the things closer to you move out of your field of vision faster than something in the distance, like a mountain or a large building. We can imitate that here by making the background images on top (in the foreground, closer to us) wider than those on the bottom of the stack (in the distance).
The different lengths let us use one animation to move all the background images at different rates in the same interval of time:
animation: parallax_bg linear 40s infinite;
The shorter images have less distance to cover in the same amount of time as the longer images, so they move slower.
Let’s have a look at the background’s animation:
@keyframes parallax_bg {
0% {
background-position: -2400px 100%, -2000px 100%, -1800px 100%, -1600px 100%, -1200px 100%;
}
100% {
background-position: 0 100%, 0 100%, 0 100%, 0 100%, 0 100%;
}
}
At 0%, all the background images are positioned at the negative value of their own widths. Then they start moving toward background-position: 0 100%. If we wanted to move them in the reverse direction, we’d remove the negative values at 0% (so they would start at 2400px 100%, 2000px 100%, etc.). Try changing the values in the codepen above or changing background-repeat to none to see how the images play together.
.foreground and .midground operate on the same principles, only they use single background images.
The music
After finishing the first draft of my original walk cycle, I made a GIF with it and posted it on YTMND with some music from the movie Paprika, specifically the track “The Girl in Byakkoya.” After showing it to some colleagues in my community, it became clear that this was a winning combination sure to drive away dresscode blues. So let’s use HTML5 to get a clip of that music looping in there!
Warning, there is sound. Please adjust your volume or apply headphones as needed.
We’re using HTML5 audio’s loop and autoplay abilities to automatically play and loop a sound file on page load:
<audio loop autoplay>
<source src="http://music.com/clip.mp3" />
</audio>
Unfortunately, you may notice there is a small pause between loops. HTML5 audio, thou art half-baked still. Let’s hope one day the Web Audio API will be able to help us out, but until things improve, we’ll have to hack our way around these shortcomings.
Turns out there’s a handy little script called seamlessLoop.js which we can use to patch this. Mind you, if we were really getting crazy with the Cheese Whiz, we’d want to get out big guns like sound.js. But that’d be overkill for a mere loop (and explaining the Web Audio API might bore, rather than impress your friends)!
Installing seamlessLoop.js will get rid of the pause, and now our walk cycle is complete.
(I’ve done some very rough sniffing to see if the browser can play MP3 files. If not, we fall back to using .ogg formatted clips (Opera and Firefox users, you’re welcome).)
Really impress your friends by adding a run cycle
So we have music, we have a walk cycle, we have parallax. It will be a snap to bring them all together and have a simple, endless animation. But let’s go one step further and knock the socks off our viewers by adding a run cycle.
The run cycle
Tacking a run cycle on to our walk cycle will require a third animation sequence: a transitional animation of Tuna switching from walking to running. I have added all these to the sprite:
Let’s work on getting that transition down. We’re going to use multiple animations on the same .tuna div, but we’re going to kick them off at different intervals using animation-delay—no JavaScript required! Isn’t that magical?
It requires a wee bit of math (not much, it doesn’t hurt) to line them up. We want to:
Loop the walk animation twice
Play the transitional cycle once (it has a finite beginning and end perfectly drawn to pick up between the last frame of the walk cycle and the first frame of the run cycle—no looping this baby)
RUN FOREVER.
Using the pattern animation: <name> <duration> <timing-function> <delay> <iteration-count>, here’s what that looks like:
animation:
walk-cycle 1s steps(12) 2,
walk-to-run .75s steps(12) 2s 1,
run-cycle .75s steps(13) 2.75s infinite;
I played with the times to get make the movement more realistic. You may notice that the running animation looks smoother than the walking animation. That’s because it has 13 keyframes running over .75 second instead of 12 running in one second. Remember, professional animation studios use super-high frame counts. This little animation isn’t even up to PBS’s standards!
The music: extended play with HTML5 audio sprites
My favorite part in the The Girl in Byakkoya is when the calm opening builds and transitions into a bouncy motif. I want to start with Tuna walking during the opening, and then loop the running and bounciness together for infinity.
The intro lasts for 24 seconds, so we set our 1 second walk cycle to run for 24 repetitions:
walk-cycle 1s steps(12) 24
We delay walk-to-run by 24 seconds so it runs for .75 seconds before…
We play run-cycle at 24.75 seconds and loop it infinitely
For the music, we need to think of it as two parts: the intro and the bouncy loop. We can do this quite nicely with audio sprites: using one HTML5 audio element and using JavaScript to change the play head location, like skipping tracks with a CD player. Although this technique will result in a small gap in music shifts, I think it’s worth using here to give you some ideas.
// Get the audio element
var byakkoya = document.querySelector('audio');
// create function to play and loop audio
function song(a){
//start playing at 0
a.currentTime = 0;
a.play();
//when we hit 64 seconds...
setTimeout(function(){
// skip back to 24.5 seconds and keep playing...
a.currentTime = 24.55;
// then loop back when we hit 64 again, or every 59.5 seconds.
setInterval(function(){
a.currentTime = 24.55;
},39450);
},64000);
}
The load screen
I’ve put it off as long as I can, but now that the music and the CSS are both running on their own separate clocks, it’s imperative that both images and music be fully downloaded and ready to run when we kick this thing off. So we need a load screen (also, it’s nice to give people a heads-up that you’re about to blast them with music, no matter how wonderful that music may be).
Since the two timers are so closely linked, we’d best not run the animations until we run the music:
* { animation-play-state: paused; }
animation-play-state can be set to paused or running, and it’s the most useful thing you will learn today.
First we use an event listener to see when the browser thinks we can play through from the beginning to end of the music without pause for buffering:
byakkoya.addEventListener("canplaythrough", function () { });
(More on HTML5 audio’s media events at HTML5doctor.com)
Inside our event listener, I use a bit of jQuery to add class of .playable to the body when we’re ready to enable the play button:
$("body").addClass("playable");
$("#play-me").html("Play me.").click(function(){
song(byakkoya);
$("body").addClass("playing");
});
That .playing class is special because it turns on the animations at the same time we start playing the song:
.playing * { animation-play-state: running; }
The background
We’re almost done here! When we add the background, it needs to speed up at the same time that Tuna starts running. The music picks up speed around 24.75 seconds in, and so we’re going to use animation-delay on those backgrounds, too.
This will require some math. If you try to simply shorten the animation’s duration at the 24.75s mark, the backgrounds will, mid-scroll, jump back to their initial background positions to start the new animation! Argh! So let’s make a new @keyframe and calculate where the background position would be just before we speed up the animation.
Here’s the formula:
new 0% value = delay ÷ old duration × length of image
new 100% value = new 0% value + length of image
Here’s the formula put to work on a smaller scale:
Voilà! The finished animation!
I’ve always wanted to bring my illustrations to life. Then I woke up one morning and realized that I had all the tools to do so in my browser and in my head. Now I have fallen in love with Flashless animation.
I’m sure there will be detractors who say HTML wasn’t meant for this and it’s a gross abuse of the DOM! But I say that these explorations help us expand what we expect from devices and software and challenge us in good ways as artists and programmers. The browser might not be the most appropriate place for animation, but is certainly a fun place to start.
There is so much you can do with the spec implemented today, and so much of the territory is still unexplored. I have not yet begun to show you everything. In eight months I expect this demo will represent the norm, not the bleeding edge. I look forward to seeing the wonderful things you create.
(Also, someone, please, do something about that gappy HTML5 audio looping. It’s a crying shame!) |
2012 |
Rachel Nabors |
rachelnabors |
2012-12-06T00:00:00+00:00 |
https://24ways.org/2012/flashless-animation/ |
code |
| 89 |
Direction, Distance and Destinations |
With all these new smartphones in the hands of lost and confused owners, we need a better way to represent distances and directions to destinations. The immediate examples that jump to mind are augmented reality apps which let you see another world through your phone’s camera. While this is interesting, there is a simpler way: letting people know how far away they are and if they are getting warmer or colder.
In the app world, you can easily tap into the phone’s array of sensors such as the GPS and compass, but what people rarely know is that you can do the same with HTML. The native versus web app debate will never subside, but at least we can show you how to replicate some of the functionality progressively in HTML and JavaScript.
In this tutorial, we’ll walk through how to create a simple webpage listing distances and directions of a few popular locations around the world. We’ll use JavaScript to access the device’s geolocation API and also attempt to access the compass to get a heading. Both of these APIs are documented, to be included in the W3C geolocation API specification, and can be used on both desktop and mobile devices today.
To get started, we need a list of a few locations around the world. I have chosen the highest mountain peak on each continent so you can see a diverse set of distances and directions.
Mountain
°Latitude
°Longitude
Kilimanjaro
-3.075833
37.353333
Vinson Massif
-78.525483
-85.617147
Puncak Jaya
-4.078889
137.158333
Everest
27.988056
86.925278
Elbrus
43.355
42.439167
Mount McKinley
63.0695
-151.0074
Aconcagua
-32.653431
-70.011083
Source: Wikipedia
We can put those into an HTML list to be styled and accessed by JavaScript to create some distance and directions calculations.
The next thing we need to do is check to see if the browser and operating system have geolocation support. To do this we test to see if the function is available or not using a single JavaScript if statement.
<script>
// If this is true, then the method is supported and we can try to access the location
if (navigator.geolocation) {
navigator.geolocation.getCurrentPosition(geo_success, geo_error);
}
</script>
The if statement will be false if geolocation support is not present, and then it is up to you to do something else instead as a fallback. For this example, we’ll do nothing since our page should work as is and only get progressively better if more functionality is available.
The if statement will be true if there is support and therefore will continue inside the curly brackets to try to get the location. This should prompt the reader to accept or deny the request to get their location. If they say no, the second function callback is processed, in this case a function called geo_error; whereas if the location is available, it fires the geo_success function callback.
The function geo_error(){ } isn’t that exciting. You can handle this in any way you see fit. The success function is more interesting. We get a position object passed into the function which contains a series of exciting attributes, namely the latitude and longitude of the device’s current location.
function geo_success(position){
gLat = position.coords.latitude;
gLon = position.coords.longitude;
}
Now, in the variables gLat and gLon we have the user’s approximate geographical position. We can use this information to start to calculate some distances between where they are and all the destinations.
At the time of writing, you can also get position.coords.heading, but on Windows and iOS devices this returned NULL. In the future, if and when this is supported, this is also where you can easily grab the compass information.
Inside the geo_success function, we want to loop through the HTML to get all of the mountain peaks’ latitudes and longitudes and compute the distance.
...
$('.geo').each(function(){
// Get the lat/lon from the HTML
tLat = $(this).find('.lat').html()
tLon = $(this).find('.lon').html()
// compute the distances between the current location and this points location
dist = distance(tLat,tLon,gLat,gLon);
// set the return values into something useful
d = parseInt(dist[0]*10)/10;
a = parseFloat(dist[1]);
// display the value in the HTML and style the arrow
$(this).find('.distance').html(d+' km away');
$(this).find('.direction').css('-webkit-transform','rotate(-' + a + 'deg)');
// store the arc for later use if compass is available
$(this).attr('data-arc',a);
}
In the variable d we have the distance between the current location and the location of the mountain peak based on the Haversine Formula. The variable a is the arc, which has a value from 0 to 359.99. This will be useful later if we have compass support. Given these two values we have a distance and a heading to style the HTML.
The next thing we want to do is check to see if the device has a compass and then get access to the the current heading. As we’ll see, there are several ways to do this, some of which work on certain devices but not others. The W3C geolocation spec says that, along with the coordinates, there are several other attributes: accuracy; altitude; and heading. Heading is the direction to true north, which is different than magnetic north! WebKit and Windows return NULL for the heading value, but WebKit has an experimental method to fetch the heading. If you get into accessing these sensors, you’ll have to try to catch a few of these methods to finally get a value. Assuming you do, we can move on to the more interesting display opportunities.
In an ideal world, this would succeed and set a variable we’ll call compassHeading to get a value between 0 and 359.99 degrees. Now we know which direction north is, we also know the direction relative to north of the path to our destination, so we can can subtract the two values to get an arrow to display on the screen. But we’re not finished yet: we also need to get the device’s orientation (landscape or portrait) and subtract the correct amount from the angle for the arrow. Once we have a value, we can use CSS to rotate the arrow the correct number of degrees.
-webkit-transform: rotate(-180deg)
Not all devices support a standard way to access compass information, so in the meantime we need to use a work around. On iOS, you can use the experimental event method e.webkitCompassHeading. We want the compass to update in real time as the device is moved around, so we’ll put this inside an event listener.
window.addEventListener('deviceorientation', function(e) {
// Loop through all the locations on the page
$('.geo').each(function(){
// get the arc value from north we computed and stored earlier
destination_arc = parseInt($(this).attr('data-arc'))
compassHeading = e.webkitCompassHeading + window.orientation + destination_arc;
// find the arrow element and rotate it accordingly
$(this).find('.direction').css('-webkit-transform','rotate(-' + compassHeading + 'deg)');
}
}
As the device is rotated, the compass arrow will constantly be updated. If you want to see an example, you can have a look at this page which shows the distances to all the peaks on each continent.
With progressive enhancement, we slowly layer on additional functionality as we go. The reader will first see the list of locations with a latitude and longitude. If the device is capable and permissions allow, it will then compute the distance. If a compass is available, with the correct permissions it will then add the final layer which is direction.
You should consider this code a stub for your projects. If you are making a hyperlocal webpage with restaurant locations, for example, then consider adding these features. Knowing not only how far away a place is, but also the direction can be hugely important, and since the compass is always active, it acts as a guide to the location.
Future developments
Improvements to this could include setting a timer and recalling the navigator.geolocation.getCurrentPosition() function and updating the distances. I chose very distant mountains so kilometres made sense, but you can divide again by 1,000 to convert to metres if you are dealing with much nearer places. Walking or driving would change the distances so the ability to refresh would be important.
It is outside the scope of this article, but if you manage to get this HTML to work offline, then you can make a nice web app which sits on your devices’ homescreens and works even without an internet connection. This could be ideal for travellers in an unknown city looking for your destination. Just with offline storage, base64 encoding and data URIs, it is possible to embed plenty of design and functionality into a small offline webpage.
Now you know how to use JavaScript to look up a destination’s location and figure out the distance and direction – never get lost again. |
2012 |
Brian Suda |
briansuda |
2012-12-19T00:00:00+00:00 |
https://24ways.org/2012/direction-distance-and-destinations/ |
code |
| 91 |
Infinite Canvas: Moving Beyond the Page |
Remember Web 2.0? I do. In fact, that phrase neatly bifurcates my life on the internet. Pre-2.0, I was occupied by chatting on AOL and eventually by learning HTML so I could build sites on Geocities. Around 2002, however, I saw a WYSIWYG demo in Dreamweaver. The instructor was dragging boxes and images around a canvas. With a few clicks he was able to build a dynamic, single-page interface. Coming from the world of tables and inline HTML styles, I was stunned.
As I entered college the next year, the web was blossoming: broadband, Wi-Fi, mobile (proud PDA owner, right here), CSS, Ajax, Bloglines, Gmail and, soon, Google Maps. I was a technology fanatic and a hobbyist web developer. For me, the web had long been informational. It was now rapidly becoming something else, something more: sophisticated, presentational, actionable.
In 2003 we watched as the internet changed. The predominant theme of those early Web 2.0 years was the withering of Internet Explorer 6 and the triumph of web standards. Upon cresting that mountain, we looked around and collectively breathed the rarefied air of pristine HMTL and CSS, uncontaminated by toxic hacks and forks – only to immediately begin hurtling down the other side at what is, frankly, terrifying speed.
Ten years later, we are still riding that rocket. Our days (and nights) are spent cramming for exams on CSS3 and RWD and Sass and RESS. We are the proud, frazzled owners of tiny pocket computers that annihilate the best laptops we could have imagined, and the architects of websites that are no longer restricted to big screens nor even segregated by device. We dragoon our sites into working any time, anywhere. At this point, we can hardly ask the spec developers to slow down to allow us to catch our breath, nor should we. It is, without a doubt, a most wonderful time to be a web developer.
But despite the newfound luxury of rounded corners, gradients, embeddable fonts, low-level graphics APIs, and, glory be, shadows, the canyon between HTML and native appears to be as wide as ever. The improvements in HTML and CSS have, for the most part, been conveniences rather than fundamental shifts. What I’d like to do now, if you’ll allow me, is outline just a few of the remaining gaps that continue to separate web sites and applications from their native companions.
What I’d like for Christmas
There is one irritant which is the grandfather of them all, the one from which all others flow and have their being, and it is, simply, the page refresh. That’s right, the foundational principle of the web is our single greatest foe. To paraphrase a patron saint of designers everywhere, if you see a page refresh, we blew it.
The page refresh brings with it, of course, many noble and lovely benefits: addressability, for one; and pagination, for another. (See also caching, resource loading, and probably half a dozen others.) Still, those concerns can be answered (and arguably answered more compellingly) by replacing the weary page with the young and hearty document. Flash may be dead, but it has many lessons yet to bequeath.
Preparing a single document when the site loads allows us to engage the visitor in a smooth and engrossing experience. We have long known this, of course. Twitter was not the first to attempt, via JavaScript, to envelop the user in a single-page application, nor the first to abandon it. Our shared task is to move those technologies down the stack, to make them more primitive, so that the next Twitter can be built with the most basic combination of HTML and CSS rather than relying on complicated, slow, and unreliable scripted solutions.
So, let’s take a look at what we can do, right now, that we might have a better idea of where our current tools fall short.
A print magazine in HTML clothing
Like many others, I suspect, one of my earliest experiences with publishing was laying out newsletters and newspapers on a computer for print. If you’ve ever used InDesign or Quark or even Microsoft Publisher, you’ll remember reflowing content from page to page. The advent of the internet signaled, in many ways, the abandonment of that model. Articles were no longer constrained by the physical limitations of paper. In shedding our chains, however, it is arguable that we’ve lost something useful. We had a self-contained and complete package, a closed loop. It was a thing that could be handled and finished, and doing so provided a sense of accomplishment that our modern, infinitely scrolling, ever-fractal web of content has stolen.
For our purposes today, we will treat 24 ways as the online equivalent of that newspaper or magazine. A single year’s worth of articles could easily be considered an issue. Right now, navigating between articles means clicking on the article you’d like to view and being taken to that specific address via a page reload. If Drew wanted to, it wouldn’t be difficult to update the page in place (via JavaScript) and change the address (again via JavaScript with the History API) to reflect the new content found at the new location. But what if Drew wanted to do that without JavaScript? And what if he wanted the site to not merely load the content but actually whisk you along the page in a compelling and delightful way, à la the Mag+ demo we all saw a few years ago when the iPad was first introduced? Uh, no.
We’re all familiar with websites that have attempted to go beyond the page by weaving many chunks of content together into a large document and for good reason. There is tremendous appeal in opening and exploring the canvas beyond the edges of our screens.
In one rather straightforward example from last year, Mozilla contacted Full Stop to build a website promoting Aza Raskin’s proposal for a set of Creative Commons-style privacy icons. Like a lot of the sites we build (including our own), the amount of information we were presenting was minimal. In these instances, we encourage our clients to consider including everything on a single page. The result was a horizontally driven site that was, if not whimsical, at least clever and attractive to the intended audience. An experience that is taken for granted when using device-native technology is utterly, maddeningly impossible to replicate on the web without jumping through JavaScript hoops.
In another, more complex example, we again had the pleasure of working with Aza earlier this year, this time on a redesign of the Massive Health website. Our assignment was to design and build a site that communicated Massive’s commitment to modern personal health. The site had to be visually and interactively stunning while maintaining a usable and clear interface for the casual visitor. Our solution was to extend the infinite company logo into a ribbon that carried the visitor through the site narrative. It also meant we’d be asking the browser to accommodate something it was never designed to handle: a non-linear design. (Be sure to play around. There’s a lot going on under the hood. We were also this close to a ZUI, if WebKit didn’t freak out when pages were scaled beyond 10×.) Despite the apparent and deliberate design simplicity, the techniques necessary to implement it are anything but. From updating the URL to moving the visitor from section to section, we’re firmly in JavaScript territory. And that’s a shame.
What can we do?
We might not be able to specify these layouts in HTML and CSS just yet, but that doesn’t mean we can’t learn a few new tricks while we wait. Let’s see how close we can come to recreating the privacy icons design, the Massive design, or the Mag+ design without resorting to JavaScript.
A horizontally paginated site
The first thing we’re going to need is the concept of a page within our HTML document. Using plain old HTML and CSS, we can stack a series of <div>s sideways (with a little assist from our new friend, the viewport-width unit, not that he was strictly necessary). All we need to know is how many pages we have. (And, boy, wouldn’t it be nice to be able to know that without having to predetermine it or use JavaScript?)
.window {
overflow: hidden;
width: 100%;
}
.pages {
width: 200vw;
}
.page {
float: left;
overflow: hidden;
width: 100vw;
}
If you look carefully, you’ll see that the conceit we’ll use in the rest of the demos is in place. Despite the document containing multiple pages, only one is visible at any given time. This allows us to keep the user focused on the task (or content) at hand.
By the way, you’ll need to use a modern, WebKit-based browser for these demos. I recommend downloading the WebKit nightly builds, Chrome Canary, or being comfortable with setting flags in Chrome.
A horizontally paginated site, with transitions
Ah, here’s the rub. We have functional navigation, but precious few cues for the user. It’s not much good shoving the visitor around various parts of the document if they don’t get the pleasant whooshing experience of the journey. You might be thinking, what about that new CSS selector, target-something…? Well, my friend, you’re on the right track. Let’s test it. We’re going to need to use a bit of sleight of hand. While we’d like to simply offset the containing element by the number of pages we’re moving (like we did on Massive), CSS alone can’t give us that information, and that means we’re going to need to fake it by expanding and collapsing pages as you navigate. Here are the bits we’re going to need:
.page {
-webkit-transition: width 1s; // Naturally you're going to want to include all the relevant prefixes here
float: left;
left: 0;
overflow: hidden;
position: relative;
width: 100vw;
}
.page:not(:target) {
width: 0;
}
Ah, but we’re not fooling anyone with that trick. As soon as you move beyond a single page, the visitor’s disbelief comes tumbling down when the linear page transitions are unaffected by the distance the pages are allegedly traveling. And you may have already noticed an even more fatal flaw: I secretly linked you to the first page rather than the unadorned URL. If you visit the same page with no URL fragment, you get a blank screen. Sure, we could force a redirect with some server-side trickery, but that feels like cheating. Perhaps if we had the CSS4 subject selector we could apply styles to the parent based on the child being targeted by the URL. We might also need a few more abilities, like determining the total number of pages and having relative sibling selectors (e.g. nth-sibling), but we’d sure be a lot closer.
A horizontally paginated site, with transitions – no cheating
Well, what other cards can we play? How about the checkbox hack? Sure, it’s a garish trick, but it might be the best we can do today. Check it out.
label {
cursor: pointer;
}
input {
display: none;
}
input:not(:checked) + .page {
max-height: 100vh;
width: 0;
}
Finally, we can see the first page thanks to the state we are able to set on the appropriate radio button. Of course, now we don’t have URLs, so maybe this isn’t a winning plan after all. While our HTML and CSS toolkit may feel primitive at the moment, we certainly don’t want to sacrifice the addressability of the web. If there’s one bedrock principle, that’s it.
A horizontally paginated site, with transitions – no cheating and a gorgeous homepage
Gorgeous may not be the right word, but our little magazine is finally shaping up. Thanks to the CSS regions spec, we’ve got an exciting new power, the ability to begin an article in one place and bend it to our will. (Remember, your everyday browser isn’t going to work for these demos. Try the WebKit nightly build to see what we’re talking about.) As with the rest of the examples, we’re clearly abusing these features. Off-canvas layouts (you can thank Luke Wroblewski for the name) are simply not considered to be normal patterns… yet.
Here’s a quick look at what’s going on:
.excerpt-container {
float: left;
padding: 2em;
position: relative;
width: 100%;
}
.excerpt {
height: 16em;
}
.excerpt_name_article-1,
.page-1 .article-flow-region {
-webkit-flow-from: article-1;
}
.article-content_for_article-1 {
-webkit-flow-into: article-1;
}
The regions pattern is comprised of at least three components: a beginning; an ending; and a source. Using CSS, we’re able to define specific elements that should be available for the content to flow through. If magazine-style layouts are something you’re interested in learning more about (and you should be), be sure to check out the great work Adobe has been doing.
Looking forward, and backward
As designers, builders, and consumers of the web, we share a desire to see the usability and enjoyability of websites continue to rise. We are incredibly lucky to be working in a time when a three-month-old website can be laughably outdated. Our goal ought to be to improve upon both the weaknesses and the strengths of the web platform. We seek not only smoother transitions and larger canvases, but fine-grained addressability. Our URLs should point directly and unambiguously to specific content elements, be they pages, sections, paragraphs or words. Moreover, off-screen design patterns are essential to accommodating and empowering the multitude of devices we use to access the web. We should express the desire that interpage links take advantage of the CSS transitions which have been put to such good effect in every other aspect of our designs. Transitions aren’t just nice to have, they’re table stakes in the highly competitive world of native applications.
The tools and technologies we have right now allow us to create smart, beautiful, useful webpages. With a little help, we can begin removing the seams and sutures that bind the web to an earlier, less sophisticated generation. |
2012 |
Nathan Peretic |
nathanperetic |
2012-12-21T00:00:00+00:00 |
https://24ways.org/2012/infinite-canvas-moving-beyond-the-page/ |
code |
| 92 |
Redesigning the Media Query |
Responsive web design is showing us that designing content is more important than designing containers. But if you’ve given RWD a serious try, you know that shifting your focus from the container is surprisingly hard to do. There are many factors and
instincts working against you, and one culprit is a perpetrator you’d least suspect.
The media query is the ringmaster of responsive design. It lets us establish the rules of the game and gives us what we need most: control. However, like some kind of evil double agent, the media query is actually working against you.
Its very nature diverts your attention away from content and forces you to focus on the container.
The very act of choosing a media query value means choosing a screen size.
Look at the history of the media query—it’s always been about the container. Values like screen, print, handheld and tv don’t have anything to do with content. The modern media query lets us choose screen dimensions, which is great because it makes RWD possible. But it’s still the act of choosing something that is completely unpredictable.
Content should dictate our breakpoints, not the container. In order to get our focus back to the only thing that matters, we need a reengineered media query—one that frees us from thinking about screen dimensions. A media query that works for your content, not the window. Fortunately, Sass 3.2 is ready and willing to take on this challenge.
Thinking in Columns
Fluid grids never clicked for me. I feel so disoriented and confused by their squishiness. Responsive design demands their use though, right?
I was ready to surrender until I found a grid that turned my world upright again. The Frameless Grid by Joni Korpi demonstrates that column and gutter sizes can stay fixed. As the screen size changes, you simply add or remove columns to accommodate. This made sense to me and armed with this concept I was able to give Sass the first component it needs to rewrite the media query: fixed column and gutter size variables.
$grid-column: 60px;
$grid-gutter: 20px;
We’re going to want some resolution independence too, so let’s create a function that converts those nasty pixel values into ems.
@function em($px, $base: $base-font-size) {
@return ($px / $base) * 1em;
}
We now have the components needed to figure out the width of multiple columns in ems. Let’s put them together in a function that will take any number of columns and return the fixed width value of their size.
@function fixed($col) {
@return $col * em($grid-column + $grid-gutter)
}
With the math in place we can now write a mixin that takes a column count as a parameter, then generates the perfect media query necessary to fit that number of columns on the screen. We can also build in some left and right margin for our layout by adding an additional gutter value (remembering that we already have one gutter built into our fixed function).
@mixin breakpoint($min) {
@media (min-width: fixed($min) + em($grid-gutter)) {
@content
}
}
And, just like that, we’ve rewritten the media query. Instead of picking a minimum screen size for our layout, we can simply determine the number of columns needed. Let’s add a wrapper class so that we can center our content on the screen.
@mixin breakpoint($min) {
@media (min-width: fixed($min) + em($grid-gutter)) {
.wrapper {
width: fixed($min) - em($grid-gutter);
margin-left: auto; margin-right: auto;
}
@content
}
}
Designing content with a column count gives us nice, easy, whole numbers to work with. Sizing content, sidebars or widgets is now as simple as specifying a single-digit number.
@include breakpoint(8) {
.main { width: fixed(5); }
.sidebar { width: fixed(3); }
}
Those four lines of Sass just created a responsive layout for us. When the screen is big enough to fit eight columns, it will trigger a fixed width layout. And give widths to our main content and sidebar. The following is the outputted CSS…
@media (min-width: 41.25em) {
.wrapper {
width: 38.75em;
margin-left: auto; margin-right: auto;
}
.main { width: 25em; }
.sidebar { width: 15em; }
}
Demo
I’ve created a Codepen demo that demonstrates what we’ve covered so far. I’ve added to the demo some grid classes based on Griddle by Nicolas Gallagher to create a floatless layout. I’ve also added a CSS gradient overlay to help you visualize columns. Try changing the column variable sizes or the breakpoint includes to see how the layout reacts to different screen sizes.
Responsive Images
Responsive images are a serious problem, but I’m excited to see the community talk so passionately about a solution. Now, there are some excellent stopgaps while we wait for something official, but these solutions require you to mirror your breakpoints in JavaScript or HTML. This poses a serious problem for my Sass-generated media queries, because I have no idea what the real values of my breakpoints are anymore. For responsive images to work, JavaScript needs to recognize which media query is active so that proper images can be loaded for that layout.
What I need is a way to label my breakpoints. Fortunately, people much smarter than I have figured this out. Jeremy Keith devised a labeling method by using CSS-generated content as the storage method for breakpoint labels. We can use this technique in our breakpoint mixin by passing a label as another argument.
@include breakpoint(8, 'desktop') { /* styles */ }
Sass can take that label and use it when writing the corresponding media query. We just need to slightly modify our breakpoint mixin.
@mixin breakpoint($min, $label) {
@media (min-width: fixed($min) + em($grid-gutter)) {
// label our mq with CSS generated content
body::before { content: $label; display: none; }
.wrapper {
width: fixed($min) - em($grid-gutter);
margin-left: auto; margin-right: auto;
}
@content
}
}
This allows us to label our breakpoints with a user-friendly string. Now that our media queries are defined and labeled, we just need JavaScript to step in and read which label is active.
// get css generated label for active media query
var label = getComputedStyle(document.body, '::before')['content'];
JavaScript now knows which layout is active by reading the label in the current media query—we just need to match that label to an image. I prefer to store references to different image sizes as data attributes on my image tag.
<img class="responsive-image" data-mobile="mobile.jpg" data-desktop="desktop.jpg" />
<noscript><img src="desktop.jpg" /></noscript>
These data attributes have names that match the labels set in my CSS. So while there is some duplication going on, setting a keyword like ‘tablet’ in two places is much easier than hardcoding media query values. With matching labels in CSS and HTML our script can marry the two and load the right sized image for our layout.
// get css generated label for active media query
var label = getComputedStyle(document.body, '::before')['content'];
// select image
var $image = $('.responsive-image');
// create source from data attribute
$image.attr('src', $image.data(label));
Demo
With some slight additions to our previous Codepen demo you can see this responsive image technique in action. While the above JavaScript will work it is not nearly robust enough for production so the demo uses a jQuery plugin that can accomodate multiple images, reloading on screen resize and fallbacks if something doesn’t match up.
Creating a Framework
This media query mixin and responsive image JavaScript are the center piece of a front end framework I use to develop websites. It’s a fluid, mobile first foundation that uses the breakpoint mixin to structure fixed width layouts for tablet and desktop. Significant effort was focused on making this framework completely cross-browser. For example, one of the problems with using media queries is that essential desktop structure code ends up being hidden from legacy Internet Explorer. Respond.js is an excellent polyfill, but if you’re comfortable serving a single desktop layout to older IE, we don’t need JavaScript. We simply need to capture layout code outside of a media query and sandbox it under an IE only class name.
// set IE fallback layout to 8 columns
$ie-support = 8;
// inside of our breakpoint mixin (but outside the media query)
@if ($ie-support and $min <= $ie-support) {
.lt-ie9 { @content; }
}
Perspective Regained
Thinking in columns means you are thinking about content layout. How big of a screen do you need for 12 columns? Who cares? Having Sass write media queries means you can use intuitive numbers for content layout. A fixed grid means more layout control and less edge cases to test than a fluid grid. Using CSS labels for activating responsive images means you don’t have to duplicate breakpoints across separations of concern.
It’s a harmonious blend of approaches that gives us something we need—responsive design that feels intuitive. And design that, from the very outset, focuses on what matters most. Just like our kindergarten teachers taught us: It’s what’s inside that counts. |
2012 |
Les James |
lesjames |
2012-12-13T00:00:00+00:00 |
https://24ways.org/2012/redesigning-the-media-query/ |
code |
| 95 |
Giving Content Priority with CSS3 Grid Layout |
Browser support for many of the modules that are part of CSS3 have enabled us to use CSS for many of the things we used to have to use images for. The rise of mobile browsers and the concept of responsive web design has given us a whole new way of looking at design for the web. However, when it comes to layout, we haven’t moved very far at all. We have talked for years about separating our content and source order from the presentation of that content, yet most of us have had to make decisions on source order in order to get a certain visual layout.
Owing to some interesting specifications making their way through the W3C process at the moment, though, there is hope of change on the horizon. In this article I’m going to look at one CSS module, the CSS3 grid layout module, that enables us to define a grid and place elements on to it. This article comprises a practical demonstration of the basics of grid layout, and also a discussion of one way in which we can start thinking of content in a more adaptive way.
Before we get started, it is important to note that, at the time of writing, these examples work only in Internet Explorer 10. CSS3 grid layout is a module created by Microsoft, and implemented using the -ms prefix in IE10. My examples will all use the -ms prefix, and not include other prefixes simply because this is such an early stage specification, and by the time there are implementations in other browsers there may be inconsistencies. The implementation I describe today may well change, but is also there for your feedback.
If you don’t have access to IE10, then one way to view and test these examples is by signing up for an account with Browserstack – the free trial would give you time to have a look. I have also included screenshots of all relevant stages in creating the examples.
What is CSS3 grid layout?
CSS3 grid layout aims to let developers divide up a design into a grid and place content on to that grid. Rather than trying to fabricate a grid from floats, you can declare an actual grid on a container element and then use that to position the elements inside. Most importantly, the source order of those elements does not matter.
Declaring a grid
We declare a grid using a new value for the display property: display: grid. As we are using the IE10 implementation here, we need to prefix that value: display: -ms-grid;.
Once we have declared our grid, we set up the columns and rows using the grid-columns and grid-rows properties.
.wrapper {
display: -ms-grid;
-ms-grid-columns: 200px 20px auto 20px 200px;
-ms-grid-rows: auto 1fr;
}
In the above example, I have declared a grid on the .wrapper element. I have used the grid-columns property to create a grid with a 200 pixel-wide column, a 20 pixel gutter, a flexible width auto column that will stretch to fill the available space, another 20 pixel-wide gutter and a final 200 pixel sidebar: a flexible width layout with two fixed width sidebars. Using the grid-rows property I have created two rows: the first is set to auto so it will stretch to fill whatever I put into it; the second row is set to 1fr, a new value used in grids that means one fraction unit. In this case, one fraction unit of the available space, effectively whatever space is left.
Positioning items on the grid
Now I have a simple grid, I can pop items on to it. If I have a <div> with a class of .main that I want to place into the second row, and the flexible column set to auto I would use the following CSS:
.content {
-ms-grid-column: 3;
-ms-grid-row: 2;
-ms-grid-row-span: 1;
}
If you are old-school, you may already have realised that we are essentially creating an HTML table-like layout structure using CSS. I found the concept of a table the most helpful way to think about the grid layout module when trying to work out how to place elements.
Creating grid systems
As soon as I started to play with CSS3 grid layout, I wanted to see if I could use it to replicate a flexible grid system like this fluid 16-column 960 grid system.
I started out by defining a grid on my wrapper element, using fractions to make this grid fluid.
.wrapper {
width: 90%;
margin: 0 auto 0 auto;
display: -ms-grid;
-ms-grid-columns: 1fr (4.25fr 1fr)[16];
-ms-grid-rows: (auto 20px)[24];
}
Like the 960 grid system I was using as an example, my grid starts with a gutter, followed by the first actual column, plus another gutter repeated sixteen times. What this means is that if I want to span two columns, as far as the grid layout module is concerned that is actually three columns: two wide columns, plus one gutter. So this needs to be accounted for when positioning items.
I created a CSS class for each positioning option: column position; rows position; and column span. For example:
.grid1 {-ms-grid-column: 2;} /* applying this class positions an item in the first column (the gutter is column 1) */
.grid2 {-ms-grid-column: 4;} /* 2nd column - gutter|column 1|gutter */
.grid3 {-ms-grid-column: 6;} /* 3rd column - gutter|column 1|gutter|column2|gutter */
.row1 {-ms-grid-row:1;}
.row2 {-ms-grid-row:3;}
.row3 {-ms-grid-row:5;}
.colspan1 {-ms-grid-column-span:1;}
.colspan2 {-ms-grid-column-span:3;}
.colspan3 {-ms-grid-column-span:5;}
I could then add multiple classes to each element to set the position on on the grid.
This then gives me a replica of the fluid grid using CSS3 grid layout. To see this working fire up IE10 and view Example 1.
This works, but…
This worked, but isn’t ideal. I considered not showing this stage of my experiment – however, I think it clearly shows how the grid layout module works and is a useful starting point. That said, it’s not an approach I would take in production. First, we have to add classes to our markup that tie an element to a position on the grid. This might not be too much of a problem if we are always going to maintain the sixteen-column grid, though, as I will show you that the real power of the grid layout module appears once you start to redefine the grid, using different grids based on media queries. If you drop to a six-column layout for small screens, positioning items into column 16 makes no sense any more.
Calculating grid position using LESS
As we’ve seen, if you want to use a grid with main columns and gutters, you have to take into account the spacing between columns as well as the actual columns. This means we have to do some calculating every time we place an item on the grid. In my example above I got around this by creating a CSS class for each position, allowing me to think in sixteen rather than thirty-two columns. But by using a CSS preprocessor, I can avoid using all the classes yet still think in main columns.
I’m using LESS for my example. My simple grid framework consists of one simple mixin.
.position(@column,@row,@colspan,@rowspan) {
-ms-grid-column: @column*2;
-ms-grid-row: @row*2-1;
-ms-grid-column-span: @colspan*2-1;
-ms-grid-row-span: @rowspan*2-1;
}
My mixin takes four parameters: column; row; colspan; and rowspan. So if I wanted to place an item on column four, row three, spanning two columns and one row, I would write the following CSS:
.box {
.position(4,3,2,1);
}
The mixin would return:
.box {
-ms-grid-column: 8;
-ms-grid-row: 5;
-ms-grid-column-span: 3;
-ms-grid-row-span: 1;
}
This saves me some typing and some maths. I could also add other prefixed values into my mixin as other browsers started to add support.
We can see this in action creating a new grid. Instead of adding multiple classes to each element, I can add one class; that class uses the mixin to create the position. I have also played around with row spans using my mixin and you can see we end up with a quite complicated arrangement of boxes. Have a look at example two in IE10. I’ve used the JavaScript LESS parser so that you can view the actual LESS that I use. Note that I have needed to escape the -ms prefixed properties with ~"" to get LESS to accept them.
This is looking better. I don’t have direct positioning information on each element in the markup, just a class name – I’ve used grid(x), but it could be something far more semantic. We can now take the example a step further and redefine the grid based on screen width.
Media queries and the grid
This example uses exactly the same markup as the previous example. However, we are now using media queries to detect screen width and redefine the grid using a different number of columns depending on that width.
I start out with a six-column grid, defining that on .wrapper, then setting where the different items sit on this grid:
.wrapper {
width: 90%;
margin: 0 auto 0 auto;
display: ~"-ms-grid"; /* escaped for the LESS parser */
-ms-grid-columns: ~"1fr (4.25fr 1fr)[6]"; /* escaped for the LESS parser */
-ms-grid-rows: ~"(auto 20px)[40]"; /* escaped for the LESS parser */
}
.grid1 { .position(1,1,1,1); }
.grid2 { .position(2,1,1,1); }
/* ... see example for all declarations ... */
Using media queries, I redefine the grid to nine columns when we hit a minimum width of 700 pixels.
@media only screen and (min-width: 700px) {
.wrapper {
-ms-grid-columns: ~"1fr (4.25fr 1fr)[9]";
-ms-grid-rows: ~"(auto 20px)[50]";
}
.grid1 { .position(1,1,1,1); }
.grid2 { .position(2,1,1,1); }
/* ... */
}
Finally, we redefine the grid for 960 pixels, back to the sixteen-column grid we started out with.
@media only screen and (min-width: 940px) {
.wrapper {
-ms-grid-columns:~" 1fr (4.25fr 1fr)[16]";
-ms-grid-rows:~" (auto 20px)[24]";
}
.grid1 { .position(1,1,1,1); }
.grid2 { .position(2,1,1,1); }
/* ... */
}
If you view example three in Internet Explorer 10 you can see how the items reflow to fit the window size. You can also see, looking at the final set of blocks, that source order doesn’t matter. You can pick up a block from anywhere and place it in any position on the grid.
Laying out a simple website
So far, like a toddler on Christmas Day, we’ve been playing with boxes rather than thinking about what might be in them. So let’s take a quick look at a more realistic layout, in order to see why the CSS3 grid layout module can be really useful. At this time of year, I am very excited to get out of storage my collection of odd nativity sets, prompting my family to suggest I might want to open a museum. Should I ever do so, I’ll need a website, and here is an example layout.
As I am using CSS3 grid layout, I can order my source in a logical manner. In this example my document is as follows, though these elements could be in any order I please:
<div class="wrapper">
<div class="welcome">
...
</div>
<article class="main">
...
</article>
<div class="info">
...
</div>
<div class="ads">
...
</div>
</div>
For wide viewports I can use grid layout to create a sidebar, with the important information about opening times on the top righ,t with the ads displayed below it. This creates the layout shown in the screenshot above.
@media only screen and (min-width: 940px) {
.wrapper {
-ms-grid-columns:~" 1fr (4.25fr 1fr)[16]";
-ms-grid-rows:~" (auto 20px)[24]";
}
.welcome {
.position(1,1,12,1);
padding: 0 5% 0 0;
}
.info {
.position(13,1,4,1);
border: 0;
padding:0;
}
.main {
.position(1,2,12,1);
padding: 0 5% 0 0;
}
.ads {
.position(13,2,4,1);
display: block;
margin-left: 0;
}
}
In a floated layout, a sidebar like this often ends up being placed under the main content at smaller screen widths. For my situation this is less than ideal. I want the important information about opening times to end up above the main article, and to push the ads below it. With grid layout I can easily achieve this at the smallest width .info ends up in row two and .ads in row five with the article between.
.wrapper {
display: ~"-ms-grid";
-ms-grid-columns: ~"1fr (4.25fr 1fr)[4]";
-ms-grid-rows: ~"(auto 20px)[40]";
}
.welcome {
.position(1,1,4,1);
}
.info {
.position(1,2,4,1);
border: 4px solid #fff;
padding: 10px;
}
.content {
.position(1,3,4,5);
}
.main {
.position(1,3,4,1);
}
.ads {
.position(1,4,4,1);
}
Finally, as an extra tweak I add in a breakpoint at 600 pixels and nest a second grid on the ads area, arranging those three images into a row when they sit below the article at a screen width wider than the very narrow mobile width but still too narrow to support a sidebar.
@media only screen and (min-width: 600px) {
.ads {
display: ~"-ms-grid";
-ms-grid-columns: ~"20px 1fr 20px 1fr 20px 1fr";
-ms-grid-rows: ~"1fr";
margin-left: -20px;
}
.ad:nth-child(1) {
.position(1,1,1,1);
}
.ad:nth-child(2) {
.position(2,1,1,1);
}
.ad:nth-child(3) {
.position(3,1,1,1);
}
}
View example four in Internet Explorer 10.
This is a very simple example to show how we can use CSS grid layout without needing to add a lot of classes to our document. It also demonstrates how we can mainpulate the content depending on the context in which the user is viewing it.
Layout, source order and the idea of content priority
CSS3 grid layout isn’t the only module that starts to move us away from the issue of visual layout being linked to source order. However, with good support in Internet Explorer 10, it is a nice way to start looking at how this might work. If you look at the grid layout module as something to be used in conjunction with the flexible box layout module and the very interesting CSS regions and exclusions specifications, we have, tantalizingly on the horizon, a powerful set of tools for layout.
I am particularly keen on the potential separation of source order from layout as it dovetails rather neatly into something I spend a lot of time thinking about. As a CMS developer, working on larger scale projects as well as our CMS product Perch, I am interested in how we better enable content editors to create content for the web. In particular, I search for better ways to help them create adaptive content; content that will work in a variety of contexts rather than being tied to one representation of that content.
If the concept of adaptive content is new to you, then Karen McGrane’s presentation Adapting Ourselves to Adaptive Content is the place to start. Karen talks about needing to think of content as chunks, that might be used in many different places, displayed differently depending on context.
I absolutely agree with Karen’s approach to content. We have always attempted to move content editors away from thinking about creating a page and previewing it on the desktop. However at some point content does need to be published as a page, or a collection of content if you prefer, and bits of that content have priority. Particularly in a small screen context, content gets linearized, we can only show so much at a time, and we need to make sure important content rises to the top. In the case of my example, I wanted to ensure that the address information was clearly visible without scrolling around too much. Dropping it with the entire sidebar to the bottom of the page would not have been so helpful, though neither would moving the whole sidebar to the top of the screen so a visitor had to scroll past advertising to get to the article.
If our layout is linked to our source order, then enabling the content editor to make decisions about priority is really hard. Only a system that can do some regeneration of the source order on the server-side – perhaps by way of multiple templates – can allow those kinds of decisions to be made. For larger systems this might be a possibility; for smaller ones, or when using an off-the-shelf CMS, it is less likely to be. Fortunately, any system that allows some form of custom field type can be used to pop a class on to an element, and with CSS grid layout that is all that is needed to be able to target that element and drop it into the right place when the content is viewed, be that on a desktop or a mobile device.
This approach can move us away from forcing editors to think visually. At the moment, I might have to explain to an editor that if a certain piece of content needs to come first when viewed on a mobile device, it needs to be placed in the sidebar area, tying it to a particular layout and design. I have to do this because we have to enforce fairly strict rules around source order to make the mechanics of the responsive design work. If I can instead advise an editor to flag important content as high priority in the CMS, then I can make decisions elsewhere as to how that is displayed, and we can maintain the visual hierarchy across all the different ways content might be rendered.
Why frustrate ourselves with specifications we can’t yet use in production?
The CSS3 grid layout specification is listed under the Exploring section of the list of current work of the CSS Working Group. While discussing a module at this stage might seem a bit pointless if we can’t use it in production work, there is a very real reason for doing so. If those of us who will ultimately be developing sites with these tools find out about them early enough, then we can start to give our feedback to the people responsible for the specification. There is information on the same page about how to get involved with the disussions.
So, if you have a bit of time this holiday season, why not have a play with the CSS3 grid layout module? I have outlined here some of my thoughts on how grid layout and other modules that separate layout from source order can be used in the work that I do. Likewise, wherever in the stack you work, playing with and thinking about new specifications means you can think about how you would use them to enhance your work. Spot a problem? Think that a change to the specification would improve things for a specific use case? Then you have something you could post to www-style to add to the discussion around this module.
All the examples are on CodePen so feel free to play around and fork them. |
2012 |
Rachel Andrew |
rachelandrew |
2012-12-18T00:00:00+00:00 |
https://24ways.org/2012/css3-grid-layout/ |
code |
| 98 |
Absolute Columns |
CSS layouts have come quite a long way since the dark ages of web publishing, with all sorts of creative applications of floats, negative margins, and even background images employed in order to give us that most basic building block, the column. As the title implies, we are indeed going to be discussing columns today—more to the point, a handy little application of absolute positioning that may be exactly what you’ve been looking for…
Care for a nightcap?
If you’ve been developing for the web for long enough, you may be familiar with this little children’s fable, passed down from wizened Shaolin monks sitting atop the great Mt. Geocities: “Once upon a time, multiple columns of the same height could be easily created using TABLES.” Now, though we’re all comfortably seated on the standards train (and let’s be honest: even if you like to think you’ve fallen off, if you’ve given up using tables for layout, rest assured your sleeper car is still reserved), this particular—and as page layout goes, quite basic—trick is still a thorn in our CSSides compared to the ease of achieving the same effect using said Tables of Evil™.
See, the orange juice masks the flavor…
Creative solutions such as Dan Cederholm’s Faux Columns do a good job of making it appear as though adjacent columns maintain equal height as content expands, using a background image to fill the space that the columns cannot.
Now, the Holy Grail of CSS columns behaving exactly how they would as table cells—or more to the point, as columns—still eludes us (cough CSS3 Multi-column layout module cough), but sometimes you just need, for example, a secondary column (say, a sidebar) to match the height of a primary column, without involving the creation of images. This is where a little absolute positioning can save you time, while possibly giving your layout a little more flexibility.
Shaken, not stirred
You’re probably familiar by now with the concept of Making the Absolute, Relative as set forth long ago by Doug Bowman, but let’s quickly review just in case: an element set to position:absolute will position itself relative to its nearest ancestor set to position:relative, rather than the browser window (see Figure 1).
Figure 1.
However, what you may not know is that we can anchor more than two sides of an absolutely positioned element. Yes, that’s right, all four sides (top, right, bottom, left) can be set, though in this example we’re only going to require the services of three sides (see Figure 2 for the end result).
Figure 2.
Trust me, this will make you feel better
Our requirements are essentially the same as the standard “absolute-relative” trick—a container <div> set to position:relative, and our sidebar <div> set to position:absolute — plus another <div> that will serve as our main content column. We’ll also add a few other common layout elements (wrapper, header, and footer) so our example markup looks more like a real layout and less like a test case:
<div id="wrapper">
<div id="header">
<h2>#header</h2>
</div>
<div id="container">
<div id="column-left">
<h2>#left</h2>
<p>Lorem ipsum dolor sit amet…</p>
</div>
<div id="column-right">
<h2>#right</h2>
</div>
</div>
<div id="footer">
<h2>#footer</h2>
</div>
</div>
In this example, our main column (#column-left) is only being given a width to fit within the context of the layout, and is otherwise untouched (though we’re using pixels here, this trick will of course work with fluid layouts as well), and our right keeping our styles nice and minimal:
#container {
position: relative;
}
#column-left {
width: 480px;
}
#column-right {
position: absolute;
top: 10px;
right: 10px;
bottom: 10px;
width: 250px;
}
The trick is a simple one: the #container <div> will expand vertically to fit the content within #column-left. By telling our sidebar <div> (#column-right) to attach itself not only to the top and right edges of #container, but also to the bottom, it too will expand and contract to match the height of the left column (duplicate the “lorem ipsum” paragraph a few times to see it in action).
Figure 3.
On the rocks
“But wait!” I hear you exclaim, “when the right column has more content than the left column, it doesn’t expand! My text runneth over!” Sure enough, that’s exactly what happens, and what’s more, it’s supposed to: Absolutely positioned elements do exactly what you tell them to do, and unfortunately aren’t very good at thinking outside the box (get it? sigh…).
However, this needn’t get your spirits down, because there’s an easy way to address the issue: by adding overflow:auto to #column-right, a scrollbar will automatically appear if and when needed:
#column-right {
position: absolute;
top: 10px;
right: 10px;
bottom: 10px;
width: 250px;
overflow: auto;
}
While this may limit the trick’s usefulness to situations where the primary column will almost always have more content than the secondary column—or where the secondary column’s content can scroll with wild abandon—a little prior planning will make it easy to incorporate into your designs.
Driving us to drink
It just wouldn’t be right to have a friendly, festive holiday tutorial without inviting IE6, though in this particular instance there will be no shaming that old browser into admitting it has a problem, nor an intervention and subsequent 12-step program. That’s right my friends, this tutorial has abstained from IE6-abuse now for 30 days, thanks to the wizard Dean Edwards and his amazingly talented IE7 Javascript library.
Simply drop the Conditional Comment and <script> element into the <head> of your document, along with one tiny CSS hack that only IE6 (and below) will ever see, and that browser will be back on the straight and narrow:
<!--[if lt IE 7]>
<script src="http://ie7-js.googlecode.com/svn/version/2.0(beta3)/IE7.js" type="text/javascript"></script>
<style type="text/css" media="screen">
#container {
zoom:1; /* helps fix IE6 by initiating hasLayout */
}
</style>
<![endif]-->
Eggnog is supposed to be spiked, right?
Of course, this is one simple example of what can be a much more powerful technique, depending on your needs and creativity. Just don’t go coding up your wildest fantasies until you’ve had a chance to sleep off the Christmas turkey and whatever tasty liquids you happen to imbibe along the way… |
2008 |
Dan Rubin |
danrubin |
2008-12-22T00:00:00+00:00 |
https://24ways.org/2008/absolute-columns/ |
code |
| 99 |
A Christmas hCard From Me To You |
So apparently Christmas is coming. And what is Christmas all about? Well, cleaning out your address book, of course! What better time to go through your contacts, making sure everyone’s details are up date and that you’ve deleted all those nasty clients who never paid on time?
It’s also a good time to make sure your current clients and colleagues have your most up-to-date details, so instead of filling up their inboxes with e-cards, why not send them something useful? Something like a… vCard! (See what I did there?)
Just in case you’ve been working in a magical toy factory in the upper reaches of Scandinavia for the last few years, I’m going to tell you that now would also be the perfect time to get into microformats. Using the hCard format, we’ll build a very simple web page and markup our contact details in such a way that they’ll be understood by microformats plugins, like Operator or Tails for Firefox, or the cross-browser Microformats Bookmarklet.
Oh, and because Christmas is all about dressing up and being silly, we’ll make the whole thing look nice and have a bit of fun with some CSS3 progressive enhancement.
If you can’t wait to see what we end up with, you can preview it here.
Step 1: Contact Details
First, let’s decide what details we want to put on the page. I’d put my full name, my email address, my phone number, and my postal address, but I’d rather not get surprise visits from strangers when I’m fannying about with my baubles, so I’m going to use Father Christmas instead (that’s Santa to you Yanks).
Father Christmas
fatherchristmas@elliotjaystocks.com
25 Laughingallthe Way
Snow Falls
Lapland
Finland
010 60 58 000
Step 2: hCard Creator
Now I’m not sure about you, but I rather like getting the magical robot pixies to do the work for me, so head on over to the hCard Creator and put those pixies to work! Pop in your details and they’ll give you some nice microformatted HTML in turn.
<div id="hcard-Father-Christmas" class="vcard">
<a class="url fn" href="http://elliotjaystocks.com/fatherchristmas">Father Christmas</a>
<a class="email" href="mailto:fatherchristmas@elliotjaystocks.com"> fatherchristmas@elliotjaystocks.com</a>
<div class="adr">
<div class="street-address">25 Laughingallthe Way</div>
<span class="locality">Snow Falls</span>
,
<span class="region">Lapland</span>
,
<span class="postal-code">FI-00101</span>
<span class="country-name">Finland</span>
</div>
<div class="tel">010 60 58 000</div>
<p style="font-size:smaller;">This <a href="http://microformats.org/wiki/hcard">hCard</a> created with the <a href="http://microformats.org/code/hcard/creator">hCard creator</a>.</p>
</div>
Step 3: Editing The Code
One of the great things about microformats is that you can use pretty much whichever HTML tags you want, so just because the hCard Creator Fairies say something should be wrapped in a <span> doesn’t mean you can’t change it to a <blink>. Actually, no, don’t do that. That’s not even excusable at Christmas.
I personally have a penchant for marking up each line of an address inside a <li> tag, where the parent url retains the class of adr. As long as you keep the class names the same, you’ll be fine.
<div id="hcard-Father-Christmas" class="vcard">
<h1><a class="url fn" href="http://elliotjaystocks.com/fatherchristmas">Father Christmas </a></h1>
<a class="email" href="mailto:fatherchristmas@elliotjaystocks.com?subject=Here, have some Christmas cheer!">fatherchristmas@elliotjaystocks.com</a>
<ul class="adr">
<li class="street-address">25 Laughingallthe Way</li>
<li class="locality">Snow Falls</li>
<li class="region">Lapland</li>
<li class="postal-code">FI-00101</li>
<li class="country-name">Finland</li>
</ul>
<span class="tel">010 60 58 000</span>
</div>
Step 4: Testing The Microformats
With our microformats in place, now would be a good time to test that they’re working before we start making things look pretty. If you’re on Firefox, you can install the Operator or Tails extensions, but if you’re on another browser, just add the Microformats Bookmarklet. Regardless of your choice, the results is the same: if you’ve code microformatted content on a web page, one of these bad boys should pick it up for you and allow you to export the contact info. Give it a try and you should see father Christmas appearing in your address book of choice. Now you’ll never forget where to send those Christmas lists!
Step 5: Some Extra Markup
One of the first things we’re going to do is put a photo of Father Christmas on the hCard. We’ll be using CSS to apply a background image to a div, so we’ll be needing an extra div with a class name of “photo”. In turn, we’ll wrap the text-based elements of our hCard inside a div cunningly called “text”. Unfortunately, because of the float technique we’ll be using, we’ll have to use one of those nasty float-clearing techniques. I shall call this “christmas-cheer”, since that is what its presence will inevitably bring, of course.
Oh, and let’s add a bit of text to give the page context, too:
<p>Send your Christmas lists my way...</p>
<div id="hcard-Father-Christmas" class="vcard">
<div class="text">
<h1><a class="url fn" href="http://elliotjaystocks.com/fatherchristmas">Father Christmas </a></h1>
<a class="email" href="mailto:fatherchristmas@elliotjaystocks.com?subject=Here, have some Christmas cheer!">fatherchristmas@elliotjaystocks.com</a>
<ul class="adr">
<li class="street-address">25 Laughingallthe Way</li>
<li class="locality">Snow Falls</li>
<li class="region">Lapland</li>
<li class="postal-code">FI-00101</li>
<li class="country-name">Finland</li>
</ul>
<span class="tel">010 60 58 000</span>
</div>
<div class="photo"></div>
<br class="christmas-cheer" />
</div>
<div class="credits">
<p>A tutorial by <a href="http://elliotjaystocks.com">Elliot Jay Stocks</a> for <a href="http://24ways.org/">24 Ways</a></p>
<p>Background: <a href="http://sxc.hu/photo/1108741">stock.xchng</a> | Father Christmas: <a href="http://istockphoto.com/file_closeup/people/4575943-active-santa.php?id=4575943">iStockPhoto</a></p>
</div>
Step 6: Some Christmas Sparkle
So far, our hCard-housing web page is slightly less than inspiring, isn’t it? It’s time to add a bit of CSS. There’s nothing particularly radical going on here; just a simple layout, some basic typographic treatment, and the placement of the Father Christmas photo. I’d usually use a more thorough CSS reset like the one found in the YUI or Eric Meyer’s, but for this basic page, the simple * solution will do.
Check out the step 6 demo to see our basic styles in place.
From this…
… to this:
Step 7: Fun With imagery
Now it’s time to introduce a repeating background image to the <body> element. This will seamlessly repeat for as wide as the browser window becomes.
But that’s fairly straightforward. How about having some fun with the Father Christmas image? If you look at the image file itself, you’ll see that it’s twice as wide as the area we can see and contains a ‘hidden’ photo of our rather camp St. Nick.
As a light-hearted visual… er… ‘treat’ for users who move their mouse over the image, we move the position of the background image on the “photo” div. Check out the step 7 demo to see it working.
Step 8: Progressive Enhancement
Finally, this fun little project is a great opportunity for us to mess around with some advanced CSS features (some from the CSS3 spec) that we rarely get to use on client projects. (Don’t forget: no Christmas pressies for clients who want you to support IE6!)
Here are the rules we’re using to give some browsers a superior viewing experience:
@font-face allows us to use Jos Buivenga’s free font ‘Fertigo Pro’ on all text;
text-shadow adds a little emphasis on the opening paragraph;
body > p:first-child causes only the first paragraph to receive this treatment;
border-radius created rounded corners on our main div and the links within it;
and webkit-transition allows us to gently fade in between the default and hover states of those links.
And with that, we’re done! You can see the results here. It’s time to customise the page to your liking, upload it to your site, and send out the URL. And do it quickly, because I’m sure you’ve got some last-minute Christmas shopping to finish off! |
2008 |
Elliot Jay Stocks |
elliotjaystocks |
2008-12-10T00:00:00+00:00 |
https://24ways.org/2008/a-christmas-hcard-from-me-to-you/ |
code |
| 100 |
Moo'y Christmas |
A note from the editors: Moo has changed their API since this article was written.
As the web matures, it is less and less just about the virtual world. It is becoming entangled with our world and it is harder to tell what is virtual and what is real. There are several companies who are blurring this line and make the virtual just an extension of the physical. Moo is one such company.
Moo offers simple print on demand services. You can print business cards, moo mini cards, stickers, postcards and more. They give you the ability to upload your images, customize them, then have them sent to your door. Many companies allow this sort of digital to physical interaction, but Moo has taken it one step further and has built an API.
Printable stocking stuffers
The Moo API consists of a simple XML file that is sent to their servers. It describes all the information needed to dynamically assemble and print your object. This is very helpful, not just for when you want to print your own stickers, but when you want to offer them to your customers, friends, organization or community with no hassle. Moo handles the check-out and shipping, all you need to do is what you do best, create!
Now using an API sounds complicated, but it is actually very easy. I am going to walk you through the options so you can easily be printing in no time.
Before you can begin sending data to the Moo API, you need to register and get an API key. This is important, because it allows Moo to track usage and to credit you. To register, visit http://www.moo.com/api/ and click “Request an API key”.
In the following examples, I will use {YOUR API KEY HERE} as a place holder, replace that with your API key and everything will work fine.
First thing you need to do is to create an XML file to describe the check-out basket. Open any text-editor and start with some XML basics. Don’t worry, this is pretty simple and Moo gives you a few tools to check your XML for errors before you order.
<?xml version="1.0" encoding="UTF-8"?>
<moo xsi:noNamespaceSchemaLocation="http://www.moo.com/xsd/api_0.7.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<request>
<version>0.7</version>
<api_key>{YOUR API KEY HERE}</api_key>
<call>build</call>
<return_to>http://www.example.com/return.html</return_to>
<fail_to>http://www.example.com/fail.html</fail_to>
</request>
<payload>
...
</payload>
</moo>
Much like HTML’s <head> and <body>, Moo has created <request> and <payload> elements all wrapped in a <moo> element.
The <request> element contains a few pieces of information that is the same across all the API calls. The <version> element describes which version of the API is being used. This is more important for Moo than for you, so just stick with “0.7” for now.
The <api_key> allows Moo to track sales, referrers and credit your account.
The <call> element can only take “build” so that is pretty straight forward. The <return_to> and <fail_to> elements are URLs. These are optional and are the URLs the customer is redirected to if there is an error, or when the check out process is complete. This allows for some basic branding and a custom “thank you” page which is under your control. That’s it for the <request> element, pretty easy so far!
Next up is the <payload> element. What goes inside here describes what is to be printed. There are two possible elements, we can put <chooser> or we can put <products> directly inside <payload>. They work in a similar ways, but they drop the customer into different parts of the Moo checkout process.
If you specify <products> then you send the customer straight to the Moo payment process. If you specify <chooser> then you send the customer one-step earlier where they are allowed to pick and choose some images, remove the ones they don’t like, adjust the crop, etc. The example here will use <chooser> but with a little bit of homework you can easily adjust to <products> if you desire.
...
<chooser>
<product_type>sticker</product_type>
<images>
<url>http://example.com/images/christmas1.jpg</url>
</images>
</chooser>
...
Inside the <chooser> element, we can see there are two basic piece of information. The type of product we want to print, and the images that are to be printed. The <product_type> element can take one of five options and is required! The possibilities are: minicard, notecard, sticker, postcard or greetingcard. We’ll now look at two of these more closely.
Moo Stickers
In the Moo sticker books you get 90 small squarish stickers in a small little booklet.
The simplest XML you could send would be something like the following payload:
...
<payload>
<chooser>
<product_type>sticker</product_type>
<images>
<url>http://example.com/image1.jpg</url>
</images>
<images>
<url>http://example.com/image2.jpg</url>
</images>
<images>
<url>http://example.com/image3.jpg</url>
</images>
</chooser>
</payload>
...
This creates a sticker book with only 3 unique images, but 30 copies of each image. The Sticker books always print 90 stickers in multiples of the images you uploaded. That example only has 3 <images> elements, but you can easily duplicate the XML and send up to 90. The <url> should be the full path to your image and the image needs to be a minimum of 300 pixels by 300 pixels.
You can add more XML to describe cropping, but the simplest option is to either, let your customers choose or to pre-crop all your images square so there are no issues.
The full XML you would post to the Moo API to print sticker books would look like this:
<?xml version="1.0" encoding="UTF-8"?>
<moo xsi:noNamespaceSchemaLocation="http://www.moo.com/xsd/api_0.7.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<request>
<version>0.7</version>
<api_key>{YOUR API KEY HERE}</api_key>
<call>build</call>
<return_to>http://www.example.com/return.html</return_to>
<fail_to>http://www.example.com/fail.html</fail_to>
</request>
<payload>
<chooser>
<product_type>sticker</product_type>
<images>
<url>http://example.com/image1.jpg</url>
</images>
<images>
<url>http://example.com/image2.jpg</url>
</images>
<images>
<url>http://example.com/image3.jpg</url>
</images>
</chooser>
</payload>
</moo>
Mini-cards
The mini-cards are the small cute business cards in 14×35 dimensions and come in packs of 100.
Since the mini-cards are print on demand, this allows you to have 100 unique images on the back of the cards.
Just like the stickers example, we need the same XML setup. The <moo> element and <request> elements will be the same as before. The part you will focus on is the <payload> section.
Since you are sending along specific information, we can’t use the <chooser> option any more. Switch this to <products> which has a child of <product>, which in turn has a <product_type> and <designs>. This might seem like a lot of work, but once you have it set up you won’t need to change it.
...
<payload>
<products>
<product>
<product_type>minicard</product_type>
<designs>
...
</designs>
</product>
</products>
</payload>
...
So now that we have the basic framework, we can talk about the information specific to minicards. Inside the <designs> element, you will have one <design> for each card. Much like before, this contains a way to describe the image. Note that this time the element is called <image>, not images plural.
Inside the <image> element you have a <url> which points to where the image lives and a <type>. The <type> should just be set to ‘variable’. You can pass crop information here instead, but we’re going to keep it simple for this tutorial. If you are interested in how that works, you should refer to the official API documentation.
...
<design>
<image>
<url>http://example.com/image1.jpg</url>
<type>variable</type>
</image>
</design>
...
So far, we have managed to build a pack of 100 Moo mini-cards with the same image on the front. If you wanted 100 different images, you just need to replicate this snippit, 99 more times.
That describes the front design, but the flip-side of your mini-cards can contain 6 lines of text, which is customizable in a variety of colors, fonts and styles.
The API allows you to create different text on the back of each mini-card, something the web interface doesn’t implement. To describe the text on the mini-card we need to add a <text_collection> element inside the <design> element. If you skip this element, the back of your mini-card will just be blank, but that’s not very festive!
Inside the <text_collection> element, we need to describe the type of text we want to format, so we add a <minicard> element, which in turn contains all the lines of text. Each of Moo’s printed products take different numbers of lines of text, so if you are not planning on making mini-cards, be sure to consult the documentation.
For mini-cards, we can have 6 distinct lines, each with their own style and layout. Each line is represented by an element <text_line> which has several optional children. The <id> tells which line of the 6 to print the text one. The <string> is the text you want to print and it must be shorter than 38 characters. The <bold> element is false by default, but if you want your text bolded, then add this and set it to true.
The <align> element is also optional. By default it is set to align left. You can also set this to right or center if you desirer. The <font> element takes one of 3 types, modern, traditional or typewriter. The default is modern. Finally, you can set the <colour>, yes that’s color with a ‘u’, Moo is a British company, so they get to make the rules. When you start a print on demand company, you can spell it however you want. The <colour> element takes a 6 character hex value with a leading #.
<design>
...
<text_collection>
<minicard>
<text_line>
<id>(1-6)</id>
<string>String, I must be less than 38 chars!</string>
<bold>true</bold>
<align>left</align>
<font>modern</font>
<colour>#ff0000</colour>
</text_line>
</minicard>
</text_collection>
</design>
If you combine all of this into a mini-card request you’d get this example:
<?xml version="1.0" encoding="UTF-8"?>
<moo xsi:noNamespaceSchemaLocation="http://www.moo.com/xsd/api_0.7.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<request>
<version>0.7</version>
<api_key>{YOUR API KEY HERE}</api_key>
<call>build</call>
<return_to>http://www.example.com/return.html</return_to>
<fail_to>http://www.example.com/fail.html</fail_to>
</request>
<payload>
<products>
<product>
<product_type>minicard</product_type>
<designs>
<design>
<image>
<url>http://example.com/image1.jpg</url>
<type>variable</type>
</image>
<text_collection>
<minicard>
<text_line>
<id>1</id>
<string>String, I must be less than 38 chars!</string>
<bold>true</bold>
<align>left</align>
<font>modern</font>
<colour>#ff0000</colour>
</text_line>
</minicard>
</text_collection>
</design>
</designs>
</product>
</products>
</payload>
</moo>
Now you know how to construct the XML that describes what to print. Next, you need to know how to send it to Moo to make it happen!
Posting to the API
So your XML is file ready to go. First thing we need to do is check it to make sure it’s valid. Moo has created a simple validator where you paste in your XML, and it alerts you to problems.
When you have a fully valid XML file, you’ll want to send that to the Moo API. There are a few ways to do this, but the simplest is with an HTML form.
This is the sample code for an HTML form with a big “Buy My Stickers” button. Once you know that it is working, you can use all your existing HTML knowledge to style it up any way you like.
<form method="POST" action="http://www.moo.com/api/api.php">
<input type="hidden" name="xml" value="<?xml version="1.0" encoding="UTF-8"?> <moo xsi:noNamespaceSchemaLocation="http://www.moo.com/xsd/api_0.7.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <request>....</request> <payload>...</payload> </moo> ">
<input type="submit" name="submit" value="Buy My Stickers"/>
</form>
This is just a basic <form> element that submits to the Moo API, http://www.moo.com/api/api.php, when someone clicks the button. There is a hidden input called “xml” which contains the value the XML file we created previously.
For those of you who need to “view source” to fully understand what’s happening can see a working version and peek under the hood.
Using the API has advantages over uploading the images directly yourself. The images and text that you send via the API can be dynamic. Some companies, like Dopplr, have taken user profiles and dynamic data that changes every minute to generate customer stickers of places that you’ve travelled to or mini-cards with a world map of all the cities you have visited. Every single customer has different travel plans and therefore different sets of stickers and mini-card maps. The API allows for the utmost current information to be printed, on demand, in real-time.
Go forth and Moo’ltiply
See, making an API call wasn’t that hard was it? You are now 90% of the way to creating anything with the Moo API. With a bit of reading, you can learn that extra 10% and print any Moo product. Be on the lookout in 2009 for the official release of the 1.0 API with improvements and some extras that were not available when this article was written.
This article is released under the creative-commons attribution share-a-like license. That means you are free to re-distribute it, mash it up, translate it and otherwise re-using it ways the author never considered, in return he only asks you mention his name.
This work by Brian Suda is licensed under a Creative Commons Attribution-Share Alike 3.0 Unported License. |
2008 |
Brian Suda |
briansuda |
2008-12-19T00:00:00+00:00 |
https://24ways.org/2008/mooy-christmas/ |
code |
| 104 |
Sitewide Search On A Shoe String |
One of the questions I got a lot when I was building web sites for smaller businesses was if I could create a search engine for their site. Visitors should be able to search only this site and find things without the maintainer having to put “related articles” or “featured content” links on every page by hand.
Back when this was all fields this wasn’t easy as you either had to write your own scraping tool, use ht://dig or a paid service from providers like Yahoo, Altavista or later on Google. In the former case you had to swallow the bitter pill of computing and indexing all your content and storing it in a database for quick access and in the latter it hurt your wallet.
Times have moved on and nowadays you can have the same functionality for free using Yahoo’s “Build your own search service” – BOSS. The cool thing about BOSS is that it allows for a massive amount of hits a day and you can mash up the returned data in any format you want. Another good feature of it is that it comes with JSON-P as an output format which makes it possible to use it without any server-side component!
Starting with a working HTML form
In order to add a search to your site, you start with a simple HTML form which you can use without JavaScript. Most search engines will allow you to filter results by domain. In this case we will search “bbc.co.uk”. If you use Yahoo as your standard search, this could be:
<form id="customsearch" action="http://search.yahoo.com/search">
<div>
<label for="p">Search this site:</label>
<input type="text" name="p" id="term">
<input type="hidden" name="vs" id="site" value="bbc.co.uk">
<input type="submit" value="go">
</div>
</form>
The Google equivalent is:
<form id="customsearch" action="http://www.google.co.uk/search">
<div>
<label for="p">Search this site:</label>
<input type="text" name="as_q" id="term">
<input type="hidden" name="as_sitesearch" id="site" value="bbc.co.uk">
<input type="submit" value="go">
</div>
</form>
In any case make sure to use the ID term for the search term and site for the site, as this is what we are going to use for the script. To make things easier, also have an ID called customsearch on the form.
To use BOSS, you should get your own developer API for BOSS and replace the one in the demo code. There is click tracking on the search results to see how successful your app is, so you should make it your own.
Adding the BOSS magic
BOSS is a REST API, meaning you can use it in any HTTP request or in a browser by simply adding the right parameters to a URL. Say for example you want to search “bbc.co.uk” for “christmas” all you need to do is open the following URL:
http://boss.yahooapis.com/ysearch/web/v1/christmas?sites=bbc.co.uk&format=xml&appid=YOUR-APPLICATION-ID
Try it out and click it to see the results in XML. We don’t want XML though, which is why we get rid of the format=xml parameter which gives us the same information in JSON:
http://boss.yahooapis.com/ysearch/web/v1/christmas?sites=bbc.co.uk&appid=YOUR-APPLICATION-ID
JSON makes most sense when you can send the output to a function and immediately use it. For this to happen all you need is to add a callback parameter and the JSON will be wrapped in a function call. Say for example we want to call SITESEARCH.found() when the data was retrieved we can do it this way:
http://boss.yahooapis.com/ysearch/web/v1/christmas?sites=bbc.co.uk&callback=SITESEARCH.found&appid=YOUR-APPLICATION-ID
You can use this immediately in a script node if you want to. The following code would display the total amount of search results for the term christmas on bbc.co.uk as an alert:
<script type="text/javascript">
var SITESEARCH = {};
SITESEARCH.found = function(o){
alert(o.ysearchresponse.totalhits);
}
</script>
<script type="text/javascript" src="http://boss.yahooapis.com/ysearch/web/v1/christmas?sites=bbc.co.uk&callback=SITESEARCH.found&appid=Kzv_lcHV34HIybw0GjVkQNnw4AEXeyJ9Rb1gCZSGxSRNrcif_HdMT9qTE1y9LdI-">
</script>
However, for our example, we need to be a bit more clever with this.
Enhancing the search form
Here’s the script that enhances a search form to show results below it.
SITESEARCH = function(){
var config = {
IDs:{
searchForm:'customsearch',
term:'term',
site:'site'
},
loading:'Loading results...',
noresults:'No results found.',
appID:'YOUR-APP-ID',
results:20
};
var form;
var out;
function init(){
if(config.appID === 'YOUR-APP-ID'){
alert('Please get a real application ID!');
} else {
form = document.getElementById(config.IDs.searchForm);
if(form){
form.onsubmit = function(){
var site = document.getElementById(config.IDs.site).value;
var term = document.getElementById(config.IDs.term).value;
if(typeof site === 'string' && typeof term === 'string'){
if(typeof out !== 'undefined'){
out.parentNode.removeChild(out);
}
out = document.createElement('p');
out.appendChild(document.createTextNode(config.loading));
form.appendChild(out);
var APIurl = 'http://boss.yahooapis.com/ysearch/web/v1/' +
term + '?callback=SITESEARCH.found&sites=' +
site + '&count=' + config.results +
'&appid=' + config.appID;
var s = document.createElement('script');
s.setAttribute('src',APIurl);
s.setAttribute('type','text/javascript');
document.getElementsByTagName('head')[0].appendChild(s);
return false;
}
};
}
}
};
function found(o){
var list = document.createElement('ul');
var results = o.ysearchresponse.resultset_web;
if(results){
var item,link,description;
for(var i=0,j=results.length;i<j;i++){
item = document.createElement('li');
link = document.createElement('a');
link.setAttribute('href',results[i].clickurl);
link.innerHTML = results[i].title;
item.appendChild(link);
description = document.createElement('p');
description.innerHTML = results[i]['abstract'];
item.appendChild(description);
list.appendChild(item);
}
} else {
list = document.createElement('p');
list.appendChild(document.createTextNode(config.noresults));
}
form.replaceChild(list,out);
out = list;
};
return{
config:config,
init:init,
found:found
};
}();
Oooohhhh scary code! Let’s go through this one bit at a time:
We start by creating a module called SITESEARCH and give it an configuration object:
SITESEARCH = function(){
var config = {
IDs:{
searchForm:'customsearch',
term:'term',
site:'site'
},
loading:'Loading results...',
appID:'YOUR-APP-ID',
results:20
}
Configuration objects are a great idea to make your code easy to change and also to override. In this case you can define different IDs than the one agreed upon earlier, define a message to show when the results are loading, when there aren’t any results, the application ID and the number of results that should be displayed.
Note: you need to replace “YOUR-APP-ID” with the real ID you retrieved from BOSS, otherwise the script will complain!
var form;
var out;
function init(){
if(config.appID === 'YOUR-APP-ID'){
alert('Please get a real application ID!');
} else {
We define form and out as variables to make sure that all the methods in the module have access to them. We then check if there was a real application ID defined. If there wasn’t, the script complains and that’s that.
form = document.getElementById(config.IDs.searchForm);
if(form){
form.onsubmit = function(){
var site = document.getElementById(config.IDs.site).value;
var term = document.getElementById(config.IDs.term).value;
if(typeof site === 'string' && typeof term === 'string'){
If the application ID was a winner, we check if the form with the provided ID exists and apply an onsubmit event handler. The first thing we get is the values of the site we want to search in and the term that was entered and check that those are strings.
if(typeof out !== 'undefined'){
out.parentNode.removeChild(out);
}
out = document.createElement('p');
out.appendChild(document.createTextNode(config.loading));
form.appendChild(out);
If both are strings we check of out is undefined. We will create a loading message and subsequently the list of search results later on and store them in this variable. So if out is defined, it’ll be an old version of a search (as users will re-submit the form over and over again) and we need to remove that old version.
We then create a paragraph with the loading message and append it to the form.
var APIurl = 'http://boss.yahooapis.com/ysearch/web/v1/' +
term + '?callback=SITESEARCH.found&sites=' +
site + '&count=' + config.results +
'&appid=' + config.appID;
var s = document.createElement('script');
s.setAttribute('src',APIurl);
s.setAttribute('type','text/javascript');
document.getElementsByTagName('head')[0].appendChild(s);
return false;
}
};
}
}
};
Now it is time to call the BOSS API by assembling a correct REST URL, create a script node and apply it to the head of the document. We return false to ensure the form does not get submitted as we want to stay on the page.
Notice that we are using SITESEARCH.found as the callback method, which means that we need to define this one to deal with the data returned by the API.
function found(o){
var list = document.createElement('ul');
var results = o.ysearchresponse.resultset_web;
if(results){
var item,link,description;
We create a new list and then get the resultset_web array from the data returned from the API. If there aren’t any results returned, this array will not exist which is why we need to check for it. Once we done that we can define three variables to repeatedly store the item title we want to display, the link to point to and the description of the link.
for(var i=0,j=results.length;i<j;i++){
item = document.createElement('li');
link = document.createElement('a');
link.setAttribute('href',results[i].clickurl);
link.innerHTML = results[i].title;
item.appendChild(link);
description = document.createElement('p');
description.innerHTML = results[i]['abstract'];
item.appendChild(description);
list.appendChild(item);
}
We then loop over the results array and assemble a list of results with the titles in links and paragraphs with the abstract of the site. Notice the bracket notation for abstract as abstract is a reserved word in JavaScript2 :).
} else {
list = document.createElement('p');
list.appendChild(document.createTextNode(config.noresults));
}
form.replaceChild(list,out);
out = list;
};
If there aren’t any results, we define a paragraph with the no results message as list. In any case we replace the old out (the loading message) with the list and re-define out as the list.
return{
config:config,
init:init,
found:found
};
}();
All that is left to do is return the properties and methods we want to make public. In this case found needs to be public as it is accessed by the API return. We return init to make it accessible and config to allow implementers to override any of the properties.
Using the script
In order to use this script, all you need to do is to add it after the form in the document, override the API key with your own and call init():
<form id="customsearch" action="http://search.yahoo.com/search">
<div>
<label for="p">Search this site:</label>
<input type="text" name="p" id="term">
<input type="hidden" name="vs" id="site" value="bbc.co.uk">
<input type="submit" value="go">
</div>
</form>
<script type="text/javascript" src="boss-site-search.js"></script>
<script type="text/javascript">
SITESEARCH.config.appID = 'copy-the-id-you-know-to-get-where';
SITESEARCH.init();
</script>
Where to go from here
This is just a very simple example of what you can do with BOSS. You can define languages and regions, retrieve and display images and news and mix the results with other data sources before displaying them. One very cool feature is that by adding a view=keyterms parameter to the URL you can get the keywords of each of the results to drill deeper into the search. An example for this written in PHP is available on the YDN blog. For JavaScript solutions there is a handy wrapper called yboss available to help you go nuts. |
2008 |
Christian Heilmann |
chrisheilmann |
2008-12-04T00:00:00+00:00 |
https://24ways.org/2008/sitewide-search-on-a-shoestring/ |
code |
| 109 |
Geotag Everywhere with Fire Eagle |
A note from the editors: Since this article was written Yahoo! has retired the Fire Eagle service.
Location, they say, is everywhere. Everyone has one, all of the time. But on the web, it’s taken until this year to see the emergence of location in the applications we use and build.
The possibilities are broad. Increasingly, mobile phones provide SDKs to approximate your location wherever you are, browser extensions such as Loki and Mozilla’s Geode provide browser-level APIs to establish your location from the proximity of wireless networks to your laptop. Yahoo’s Brickhouse group launched Fire Eagle, an ambitious location broker enabling people to take their location from any of these devices or sources, and provide it to a plethora of web services. It enables you to take the location information that only your iPhone knows about and use it anywhere on the web.
That said, this is still a time of location as an emerging technology. Fire Eagle stores your location on the web (protected by application-specific access controls), but to try and give an idea of how useful and powerful your location can be — regardless of the services you use now — today’s 24ways is going to build a bookmarklet to call up your location on demand, in any web application.
Location Support on the Web
Over the past year, the number of applications implementing location features has increased dramatically. Plazes and Brightkite are both full featured social networks based around where you are, whilst Pownce rolled in Fire Eagle support to allow geotagging of all the content you post to their microblogging service. Dipity’s beautiful timeline shows for you moving from place to place and Six Apart’s activity stream for Movable Type started exposing your movements.
The number of services that hook into Fire Eagle will increase as location awareness spreads through the developer community, but you can use your location on other sites indirectly too.
Consider Flickr. Now world renowned for their incredible mapping and places features, geotagging on Flickr started out as a grassroots extension of regular tagging. That same technique can be used to start rolling geotagging in any publishing platform you come across, for any kind of content. Machine-tags (geo:lat= and geo:lon=) and the adr and geo microformats can be used to enhance anything you write with location information.
A crash course in avian inflammability
Fire Eagle is a location store. A broker between services and devices which provide location and those which consume it. It’s a switchboard that controls which pieces of your location different applications can see and use, and keeps hidden anything you want kept private. A blog widget that displays your current location in public can be restricted to display just your current city, whilst a service that provides you with a list of the nearest ATMs will operate better with a precise street address.
Even if your iPhone tells Fire Eagle exactly where you are, consuming applications only see what you want them to see. That’s important for users to realise that they’re in control, but also important for application developers to remember that you cannot rely on having super-accurate information available all the time. You need to build location aware applications which degrade gracefully, because users will provide fuzzier information — either through choice, or through less accurate sources.
Application specific permissions are controlled through an OAuth API. Each application has a unique key, used to request a second, user-specific key that permits access to that user’s information. You store that user key and it remains valid until such a time as the user revokes your application’s access. Unlike with passwords, these keys are unique per application, so revoking the access rights of one application doesn’t break all the others.
Building your first Fire Eagle app; Geomarklet
Fire Eagle’s developer documentation can take you through examples of writing simple applications using server side technologies (PHP, Python). Here, we’re going to write a client-side bookmarklet to make your location available in every site you use. It’s designed to fast-track the experience of having location available everywhere on web, and show you how that can be really handy. Hopefully, this will set you thinking about how location can enhance the new applications you build in 2009.
An oddity of bookmarklets
Bookmarklets (or ‘favlets’, for those of an MSIE persuasion) are a strange environment to program in. Critically, you have no persistent storage available. As such, using token-auth APIs in a static environment requires you to build you application in a slightly strange way; authing yourself in advance and then hardcoding the keys into your script.
Get started
Before you do anything else, go to http://fireeagle.com and log in, get set up if you need to and by all means take a look around. Take a look at the mobile updaters section of the application gallery and perhaps pick out an app that will update Fire Eagle from your phone or laptop.
Once that’s done, you need to register for an application key in the developer section. Head straight to /developer/create and complete the form. Since you’re building a standalone application, choose ‘Auth for desktop applications’ (rather than web applications), and select that you’ll be ‘accessing location’, not updating.
At the end of this process, you’ll have two application keys, a ‘Consumer Key’ and a ‘Consumer Secret’, which look like these:
Consumer Key
luKrM9U1pMnu
Consumer Secret
ZZl9YXXoJX5KLiKyVrMZffNEaBnxnd6M
These keys combined allow your application to make requests to Fire Eagle.
Next up, you need to auth yourself; granting your new application permission to use your location. Because bookmarklets don’t have local storage, you can’t integrate the auth process into the bookmarklet itself — it would have no way of storing the returned key. Instead, I’ve put together a simple web frontend through which you can auth with your application.
Head to Auth me, Amadeus!, enter the application keys you just generated and hit ‘Authorize with Fire Eagle’. You’ll be taken to the Fire Eagle website, just as in regular Fire Eagle applications, and after granting access to your app, be redirected back to Amadeus which will provide you your user tokens. These tokens are used in subsequent requests to read your location.
And, skip to the end…
The process of building the bookmarklet, making requests to Fire Eagle, rendering it to the page and so forth follows, but if you’re the impatient type, you might like to try this out right now. Take your four API keys from above, and drag the following link to your Bookmarks Toolbar; it contains all the code described below. Before you can use it, you need to edit in your own API keys. Open your browser’s bookmark editor and where you find text like ‘YOUR_CONSUMER_KEY_HERE’, swap in the corresponding key you just generated.
Get Location
Bookmarklet Basics
To start on the bookmarklet code, set out a basic JavaScript module-pattern structure:
var Geomarklet = function() {
return ({
callback: function(json) {},
run: function() {}
});
};
Geomarklet.run();
Next we’ll add the keys obtained in the setup step, and also some basic Fire Eagle support objects:
var Geomarklet = function() {
var Keys = {
consumer_key: 'IuKrJUHU1pMnu',
consumer_secret: 'ZZl9YXXoJX5KLiKyVEERTfNEaBnxnd6M',
user_token: 'xxxxxxxxxxxx',
user_secret: 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
};
var LocationDetail = {
EXACT: 0,
POSTAL: 1,
NEIGHBORHOOD: 2,
CITY: 3,
REGION: 4,
STATE: 5,
COUNTRY: 6
};
var index_offset;
return ({
callback: function(json) {},
run: function() {}
});
};
Geomarklet.run();
The Location Hierarchy
A successful Fire Eagle query returns an object called the ‘location hierarchy’. Depending on the level of detail shared, the index of a particular piece of information in the array will vary. The LocationDetail object maps the array indices of each level in the hierarchy to something comprehensible, whilst the index_offset variable is an adjustment based on the detail of the result returned.
The location hierarchy object looks like this, providing a granular breakdown of a location, in human consumable and machine-friendly forms.
"user": {
"location_hierarchy": [{
"level": 0,
"level_name": "exact",
"name": "707 19th St, San Francisco, CA",
"normal_name": "94123",
"geometry": {
"type": "Point",
"coordinates": [ - 0.2347530752, 67.232323]
},
"label": null,
"best_guess": true,
"id": ,
"located_at": "2008-12-18T00:49:58-08:00",
"query": "q=707%2019th%20Street,%20Sf"
},
{
"level": 1,
"level_name": "postal",
"name": "San Francisco, CA 94114",
"normal_name": "12345",
"woeid": ,
"place_id": "",
"geometry": {
"type": "Polygon",
"coordinates": [],
"bbox": []
},
"label": null,
"best_guess": false,
"id": 59358791,
"located_at": "2008-12-18T00:49:58-08:00"
},
{
"level": 2,
"level_name": "neighborhood",
"name": "The Mission, San Francisco, CA",
"normal_name": "The Mission",
"woeid": 23512048,
"place_id": "Y12JWsKbApmnSQpbQg",
"geometry": {
"type": "Polygon",
"coordinates": [],
"bbox": []
},
"label": null,
"best_guess": false,
"id": 59358801,
"located_at": "2008-12-18T00:49:58-08:00"
},
}
In this case the first object has a level of 0, so the index_offset is also 0.
Prerequisites
To query Fire Eagle we call in some existing libraries to handle the OAuth layer and the Fire Eagle API call. Your bookmarklet will need to add the following scripts into the page:
The SHA1 encryption algorithm
The OAuth wrapper
An extension for the OAuth wrapper
The Fire Eagle wrapper itself
When the bookmarklet is first run, we’ll insert these scripts into the document. We’re also inserting a stylesheet to dress up the UI that will be generated.
If you want to follow along any of the more mundane parts of the bookmarklet, you can download the full source code.
Rendering
This bookmarklet can be extended to support any formatting of your location you like, but for sake of example I’m going to build three common formatters that you’ll find useful for common location scenarios: Sites which already ask for your location; and in publishing systems that accept tags or HTML mark-up.
All the rendering functions are items in a renderers object, so they can be iterated through easily, making it trivial to add new formatting functions as your find new use cases (just add another function to the object).
var renderers = {
geotag: function(user) {
if(LocationDetail.EXACT !== index_offset) {
return false;
}
else {
var coords =
user.location_hierarchy[LocationDetail.EXACT].geometry.coordinates;
return "geo:lat=" + coords[0] + ", geo:lon=" + coords[1];
}
},
city: function(user) {
if(LocationDetail.CITY < index_offset) {
return false;
}
else {
return user.location_hierarchy[LocationDetail.CITY - index_offset].name;
}
}
You should always fail gracefully, and in line with catering to users who choose not to share their location precisely, always check that the location has been returned at the level you require. Geotags are expected to be precise, so if an exact location is unavailable, returning false will tell the rendering aspect of the bookmarklet to ignore the function altogether.
These first two are quite simple, geotag returns geo:lat=-0.2347530752, geo:lon=67.232323 and city returns San Francisco, CA.
This final renderer creates a chunk of HTML using the adr and geo microformats, using all available aspects of the location hierarchy, and can be used to geotag any content you write on your blog or in comments:
html: function(user) {
var geostring = '';
var adrstring = '';
var adr = [];
adr.push('<p class="adr">');
// city
if(LocationDetail.CITY >= index_offset) {
adr.push(
'\n <span class="locality">'
+ user.location_hierarchy[LocationDetail.CITY-index_offset].normal_name
+ '</span>,'
);
}
// county
if(LocationDetail.REGION >= index_offset) {
adr.push(
'\n <span class="region">'
+ user.location_hierarchy[LocationDetail.REGION-index_offset].normal_name
+ '</span>,'
);
}
// locality
if(LocationDetail.STATE >= index_offset) {
adr.push(
'\n <span class="region">'
+ user.location_hierarchy[LocationDetail.STATE-index_offset].normal_name
+ '</span>,'
);
}
// country
if(LocationDetail.COUNTRY >= index_offset) {
adr.push(
'\n <span class="country-name">'
+ user.location_hierarchy[LocationDetail.COUNTRY-index_offset].normal_name
+ '</span>'
);
}
// postal
if(LocationDetail.POSTAL >= index_offset) {
adr.push(
'\n <span class="postal-code">'
+ user.location_hierarchy[LocationDetail.POSTAL-index_offset].normal_name
+ '</span>,'
);
}
adr.push('\n</p>\n');
adrstring = adr.join('');
if(LocationDetail.EXACT === index_offset) {
var coords =
user.location_hierarchy[LocationDetail.EXACT].geometry.coordinates;
geostring = '<p class="geo">'
+'\n <span class="latitude">'
+ coords[0]
+ '</span>;'
+ '\n <span class="longitude">'
+ coords[1]
+ '</span>\n</p>\n';
}
return (adrstring + geostring);
}
Here we check the availability of every level of location and build it into the adr and geo patterns as appropriate. Just as for the geotag function, if there’s no exact location the geo markup won’t be returned.
Finally, there’s a rendering method which creates a container for all this data, renders all the applicable location formats and then displays them in the page for a user to copy and paste. You can throw this together with DOM methods and some simple styling, or roll in some components from YUI or JQuery to handle drawing full featured overlays.
You can see this simple implementation for rendering in the full source code.
Make the call
With a framework in place to render Fire Eagle’s location hierarchy, the only thing that remains is to actually request your location. Having already authed through Amadeus earlier, that’s as simple as instantiating the Fire Eagle JavaScript wrapper and making a single function call. It’s a big deal that whilst a lot of new technologies like OAuth add some complexity and require new knowledge to work with, APIs like Fire Eagle are really very simple indeed.
return {
run: function() {
insert_prerequisites();
setTimeout(
function() {
var fe = new FireEagle(
Keys.consumer_key,
Keys.consumer_secret,
Keys.user_token,
Keys.user_secret
);
var script = document.createElement('script');
script.type = 'text/javascript';
script.src = fe.getUserUrl(
FireEagle.RESPONSE_FORMAT.json,
'Geomarklet.callback'
);
document.body.appendChild(script);
},
2000
);
},
callback: function(json) {
if(json.rsp && 'fail' == json.rsp.stat) {
alert('Error ' + json.rsp.code + ": " + json.rsp.message);
}
else {
index_offset = json.user.location_hierarchy[0].level;
draw_selector(json);
}
}
};
We first insert the prerequisite scripts required for the Fire Eagle request to function, and to prevent trying to instantiate the FireEagle object before it’s been loaded over the wire, the remaining instantiation and request is wrapped inside a setTimeout delay.
We then create the request URL, referencing the Geomarklet.callback callback function and then append the script to the document body — allowing a cross-domain request.
The callback itself is quite simple. Check for the presence and value of rsp.status to test for errors, and display them as required. If the request is successful set the index_offset — to adjust for the granularity of the location hierarchy — and then pass the object to the renderer.
The result? When Geomarklet.run() is called, your location from Fire Eagle is read, and each renderer displayed on the page in an easily copy and pasteable form, ready to be used however you need.
Deploy
The final step is to convert this code into a long string for use as a bookmarklet. Easiest for Mac users is the JavaScript bundle in TextMate — choose Bundles: JavaScript: Copy as Bookmarklet to Clipboard. Then create a new ‘Get Location’ bookmark in your browser of choice and paste in.
Those without TextMate can shrink their code down into a single line by first running their code through the JSLint tool (to ensure the code is free from errors and has all the required semi-colons) and then use a find-and-replace tool to remove line breaks from your code (or even run your code through JSMin to shrink it down).
With the bookmarklet created and added to your bookmarks bar, you can now call up your location on any page at all. Get a feel for a web where your location is just another reliable part of the browsing experience.
Where next?
So, the Geomarklet you’ve been guided through is a pretty simple premise and pretty simple output. But from this base you can start to extend: Add code that will insert each of the location renderings directly into form fields, perhaps, or how about site-specific handlers to add your location tags into the correct form field in Wordpress or Tumblr? Paste in your current location to Google Maps? Or Flickr?
Geomarklet gives you a base to start experimenting with location on your own pages and the sites you browse daily.
The introduction of consumer accessible geo to the web is an adventure of discovery; not so much discovering new locations, but discovering location itself. |
2008 |
Ben Ward |
benward |
2008-12-21T00:00:00+00:00 |
https://24ways.org/2008/geotag-everywhere-with-fire-eagle/ |
code |
| 110 |
Shiny Happy Buttons |
Since Mac OS X burst onto our screens, glossy, glassy, shiny buttons have been almost de rigeur, and have essentially, along with reflections and rounded corners, become a cliché of Web 2.0 “design”. But if you can’t beat ‘em you’d better join ‘em. So, in this little contribution to our advent calendar, we’re going to take a plain old boring HTML button, and 2.0 it up the wazoo.
But, here’s the catch. We’ll use no images, either in our HTML or our CSS. No sliding doors, no image replacement techniques. Just straight up, CSS, CSS3 and a bit of experimental CSS. And, it will be compatible with pretty much any browser (though with some progressive enhancement for those who keep up with the latest browsers).
The HTML
We’ll start with our HTML.
<button type="submit">This is a shiny button</button>
OK, so it’s not shiny yet – but boy will it ever be.
Before styling, that’s going to look like this.
Ironically, depending on the operating system and browser you are using, it may well be a shiny button already, but that’s not the point. We want to make it shiny 2.0. Our mission is to make it look something like this
If you want to follow along at home keep in mind that depending on which browser you are using you may see fewer of the CSS effects we’ve added to create the button. As of writing, only in Safari are all the effects we’ll apply supported.
Taking a look at our finished product, here’s what we’ve done to it:
We’ve given the button some padding and a width.
We’ve changed the text color, and given the text a drop shadow.
We’ve given the button a border.
We’ve given the button some rounded corners.
We’ve given the button a drop shadow.
We’ve given the button a gradient background.
and remember, all without using any images.
Styling the button
So, let’s get to work.
First, we’ll add given the element some padding and a width:
button {
padding: .5em;
width: 15em;
}
Next, we’ll add the text color, and the drop shadow:
color: #ffffff;
text-shadow: 1px 1px 1px #000;
A note on text-shadow
If you’ve not seen text-shadows before well, here’s the quick back-story. Text shadow was introduced in CSS2, but only supported in Safari (version 1!) some years later. It was removed from CSS2.1, but returned in CSS3 (in the text module). It’s now supported in Safari, Opera and Firefox (3.1). Internet Explorer has a shadow filter, but the syntax is completely different.
So, how do text-shadows work? The three length values specify respectively a horizontal offset, a vertical offset and a blur (the greater the number the more blurred the shadow will be), and finally a color value for the shadow.
Rounding the corners
Now we’ll add a border, and round the corners of the element:
border: solid thin #882d13;
-webkit-border-radius: .7em;
-moz-border-radius: .7em;
border-radius: .7em;
Here, we’ve used the same property in three slightly different forms. We add the browser specific prefix for Webkit and Mozilla browsers, because right now, both of these browsers only support border radius as an experimental property. We also add the standard property name, for browsers that do support the property fully in the future.
The benefit of the browser specific prefix is that if a browser only partly supports a given property, we can easily avoid using the property with that browser simply by not adding the browser specific prefix. At present, as you might guess, border-radius is supported in Safari and Firefox, but in each the relevant prefix is required.
border-radius takes a length value, such as pixels. (It can also take two length values, but that’s for another Christmas.) In this case, as with padding, I’ve used ems, which means that as the user scales the size of text up and down, the radius will scale as well. You can test the difference by making the radius have a value of say 5px, and then zooming up and down the text size.
We’re well and truly on the way now. All we need to do is add a shadow to the button, and then a gradient background.
In CSS3 there’s the box-shadow property, currently only supported in Safari 3. It’s very similar to text-shadow – you specify a horizontal and vertical offset, a blur value and a color.
-webkit-box-shadow: 2px 2px 3px #999;
box-shadow: 2px 2px 2px #bbb;
Once more, we require the “experimental” -webkit- prefix, as Safari’s support for this property is still considered by its developers to be less than perfect.
Gradient Background
So, all we have left now is to add our shiny gradient effect. Now of course, people have been doing this kind of thing with images for a long time. But if we can avoid them all the better. Smaller pages, faster downloads, and more scalable designs that adapt better to the user’s font size preference. But how can we add a gradient background without an image?
Here we’ll look at the only property that is not as yet part of the CSS standard – Apple’s gradient function for use anywhere you can use images with CSS (in this case backgrounds). In essence, this takes SVG gradients, and makes them available via CSS syntax.
Here’s what the property and its value looks like:
background-image: -webkit-gradient(linear, left top, left bottom, from(#e9ede8), to(#ce401c),color-stop(0.4, #8c1b0b));
Zooming in on the gradient function, it has this basic form:
-webkit-gradient(type, point, point, from(color), to(color),color-stop(where, color));
Which might look complicated, but is less so than at first glance.
The name of the function is gradient (and in this case, because it is an experimental property, we use the -webkit- prefix).
You might not have seen CSS functions before, but there are others, including the attr() function, used with generated content. A function returns a value that can be used as a property value – here we are using it as a background image.
Next we specify the type of the gradient. Here we have a linear gradient, and there are also radial gradients.
After that, we specify the start and end points of the gradient – in our case the top and bottom of the element, in a vertical line.
We then specify the start and end colors – and finally one stop color, located at 40% of the way down the element. Together, this creates a gradient that smoothly transitions from the start color in the top, vertically to the stop color, then smoothly transitions to the end color.
There’s one last thing. What color will the background of our button be if the browser doesn’t support gradients? It will be white (or possibly some default color for buttons). Which may make the text difficult or impossible to read. So, we’ll add a background color as well (see why the validator is always warning you when a color but not a background color is specified for an element?).
If we put it all together, here’s what we have:
button {
width: 15em;
padding: .5em;
color: #ffffff;
text-shadow: 1px 1px 1px #000;
border: solid thin #882d13;
-webkit-border-radius: .7em;
-moz-border-radius: .7em;
border-radius: .7em;
-webkit-box-shadow: 2px 2px 3px #999;
box-shadow: 2px 2px 2px #bbb;
background-color: #ce401c;
background-image: -webkit-gradient(linear, left top, left bottom, from(#e9ede8), to(#ce401c),color-stop(0.4, #8c1b0b));
}
Which looks like this in various browsers:
In Safari (3)
In Firefox 3.1 (3.0 supports border-radius but not text-shadow)
In Opera 10
and of course in Internet Explorer (version 8 shown here)
But it looks different in different browsers
Yes, it does look different in different browsers, but we all know the answer to the question “do web sites need to look the same in every browser?“.
Even if you really think sites should look the same in every browser, hopefully this little tutorial has whet your appetite for what CSS3 and experimental CSS that’s already supported in widely used browsers (and we haven’t even touched on animations and similar effects!).
I hope you’ve enjoyed out little CSSMas present, and look forward to seeing your shiny buttons everywhere on the web.
Oh, and there’s just a bit of homework – your job is to use the :hover selector, and make a gradient in the hover state. |
2008 |
John Allsopp |
johnallsopp |
2008-12-18T00:00:00+00:00 |
https://24ways.org/2008/shiny-happy-buttons/ |
code |
| 116 |
The IE6 Equation |
It is the destiny of one browser to serve as the nemesis of web developers everywhere. At the birth of the Web Standards movement, that role was played by Netscape Navigator 4; an outdated browser that refused to die. Its tenacious existence hampered the adoption of modern standards. Today that role is played by Internet Explorer 6.
There’s a sensation that I’m sure you’re familiar with. It’s a horrible mixture of dread and nervousness. It’s the feeling you get when—after working on a design for a while in a standards-compliant browser like Firefox, Safari or Opera—you decide that you can no longer put off the inevitable moment when you must check the site in IE6. Fingers are crossed, prayers are muttered, but alas, to no avail. The nemesis browser invariably screws something up.
What do you do next? If the differences in IE6 are minor, you could just leave it be. After all, websites don’t need to look exactly the same in all browsers. But if there are major layout issues and a significant portion of your audience is still using IE6, you’ll probably need to roll up your sleeves and start fixing the problems.
A common approach is to quarantine IE6-specific CSS in a separate stylesheet. This stylesheet can then be referenced from the HTML document using conditional comments like this:
<!--[if lt IE 7]>
<link rel="stylesheet" href="ie6.css" type="text/css" media="screen" />
<![endif]-->
That stylesheet will only be served up to Internet Explorer where the version number is less than 7.
You can put anything inside a conditional comment. You could put a script element in there. So as well as serving up browser-specific CSS, it’s possible to serve up browser-specific JavaScript.
A few years back, before Microsoft released Internet Explorer 7, JavaScript genius Dean Edwards wrote a script called IE7. This amazing piece of code uses JavaScript to make Internet Explorer 5 and 6 behave like a standards-compliant browser. Dean used JavaScript to bootstrap IE’s CSS support.
Because the script is specifically targeted at Internet Explorer, there’s no point in serving it up to other browsers. Conditional comments to the rescue:
<!--[if lt IE 7]>
<script src="http://ie7-js.googlecode.com/svn/version/2.0(beta3)/IE7.js" type="text/javascript"></script>
<![endif]-->
Standards-compliant browsers won’t fetch the script. Users of IE6, on the hand, will pay a kind of bad browser tax by having to download the JavaScript file.
So when should you develop an IE6-specific stylesheet and when should you just use Dean’s JavaScript code? This is the question that myself and my co-worker Natalie Downe set out to answer one morning at Clearleft. We realised that in order to answer that question you need to first answer two other questions, how much time does it take to develop for IE6? and how much of your audience is using IE6?
Let’s say that t represents the total development time. Let t6 represent the portion of that time you spend developing for IE6. If your total audience is a, then a6 is the portion of your audience using IE6. With some algebraic help from our mathematically minded co-worker Cennydd Bowles, Natalie and I came up with the following equation to calculate the percentage likelihood that you should be using Dean’s IE7 script:
p = 50 [ log ( at6 / ta6 ) + 1 ]
Try plugging in your own numbers. If you spend a lot of time developing for IE6 and only a small portion of your audience is using that browser, you’ll get a very high number out of the equation; you should probably use the IE7 script. But if you only spend a little time developing for IE6 and a significant portion of you audience are still using that browser, you’ll get a very small value for p; you might as well write an IE6-specific stylesheet.
Of course this equation is somewhat disingenuous. While it’s entirely possible to research the percentage of your audience still using IE6, it’s not so easy to figure out how much of your development time will be spent developing for that one browser. You can’t really know until you’ve already done the development, by which time the equation is irrelevant.
Instead of using the equation, you could try imposing a limit on how long you will spend developing for IE6. Get your site working in standards-compliant browsers first, then give yourself a time limit to get it working in IE6. If you can’t solve all the issues in that time limit, switch over to using Dean’s script. You could even make the time limit directly proportional to the percentage of your audience using IE6. If 20% of your audience is still using IE6 and you’ve just spent five days getting the site working in standards-compliant browsers, give yourself one day to get it working in IE6. But if 50% of your audience is still using IE6, be prepared to spend 2.5 days wrestling with your nemesis.
All of these different methods for dealing with IE6 demonstrate that there’s no one single answer that works for everyone. They also highlight a problem with the current debate around dealing with IE6. There’s no shortage of blog posts, articles and even entire websites discussing when to drop support for IE6. But very few of them take the time to define what they mean by “support.” This isn’t a binary issue. There is no Boolean answer. Instead, there’s a sliding scale of support:
Block IE6 users from your site.
Develop with web standards and don’t spend any development time testing in IE6.
Use the Dean Edwards IE7 script to bootstrap CSS support in IE6.
Write an IE6 stylesheet to address layout issues.
Make your site look exactly the same in IE6 as in any other browser.
Each end of that scale is extreme. I don’t think that anybody should be actively blocking any browser but neither do I think that users of an outdated browser should get exactly the same experience as users of a more modern browser. The real meanings of “supporting” or “not supporting” IE6 lie somewhere in-between those extremes.
Just as I think that semantics are important in markup, they are equally important in our discussion of web development. So let’s try to come up with some better terms than using the catch-all verb “support.” If you say in your client contract that you “support” IE6, define exactly what that means. If you find yourself in a discussion about “dropping support” for IE6, take the time to explain what you think that entails.
The web developers at Yahoo! are on the right track with their concept of graded browser support. I’m interested in hearing more ideas of how to frame this discussion. If we can all agree to use clear and precise language, we stand a better chance of defeating our nemesis. |
2008 |
Jeremy Keith |
jeremykeith |
2008-12-08T00:00:00+00:00 |
https://24ways.org/2008/the-ie6-equation/ |
code |
| 117 |
The First Tool You Reach For |
Microsoft recently announced that Internet Explorer 8 will be released in the first half of 2009. Compared to the standards support of other major browsers, IE8 will not be especially great, but it will finally catch up with the state of the art in one specific area: support for CSS tables. This milestone has the potential to trigger an important change in the way you approach web design.
To show you just how big a difference CSS tables can make, think about how you might code a fluid, three-column layout from scratch. Just to make your life more difficult, give it one fixed-width column, with a background colour that differs from the rest of the page. Ready? Go!
Okay, since you’re the sort of discerning web designer who reads 24ways, I’m going to assume you at least considered doing this without using HTML tables for the layout. If you’re especially hardcore, I imagine you began thinking of CSS floats, negative margins, and faux columns. If you did, colour me impressed!
Now admit it: you probably also gave an inward sigh about the time it would take to figure out the math on the negative margin overlaps, check for dropped floats in Internet Explorer and generally wrestle each of the major browsers into giving you what you want. If after all that you simply gave up and used HTML tables, I can’t say I blame you.
There are plenty of professional web designers out there who still choose to use HTML tables as their main layout tool. Sure, they may know that users with screen readers get confused by inappropriate use of tables, but they have a job to do, and they want tools that will make that job easy, not difficult.
Now let me show you how to do it with CSS tables. First, we have a div element for each of our columns, and we wrap them all in another two divs:
<div class="container">
<div>
<div id="menu">
⋮
</div>
<div id="content">
⋮
</div>
<div id="sidebar">
⋮
</div>
</div>
</div>
Don’t sweat the “div clutter” in this code. Unlike tables, divs have no semantic meaning, and can therefore be used liberally (within reason) to provide hooks for the styles you want to apply to your page.
Using CSS, we can set the outer div to display as a table with collapsed borders (i.e. adjacent cells share a border) and a fixed layout (i.e. cell widths unaffected by their contents):
.container {
display: table;
border-collapse: collapse;
table-layout: fixed;
}
With another two rules, we set the middle div to display as a table row, and each of the inner divs to display as table cells:
.container > div {
display: table-row;
}
.container > div > div {
display: table-cell;
}
Finally, we can set the widths of the cells (and of the table itself) directly:
.container {
width: 100%;
}
#menu {
width: 200px;
}
#content {
width: auto;
}
#sidebar {
width: 25%;
}
And, just like that, we have a rock solid three-column layout, ready to be styled to your own taste, like in this example:
This example will render perfectly in reasonably up-to-date versions of Firefox, Safari and Opera, as well as the current beta release of Internet Explorer 8.
CSS tables aren’t only useful for multi-column page layout; they can come in handy in most any situation that calls for elements to be displayed side-by-side on the page. Consider this simple login form layout:
The incantation required to achieve this layout using CSS floats may be old hat to you by now, but try to teach it to a beginner, and watch his eyes widen in horror at the hoops you have to jump through (not to mention the assumptions you have to build into your design about the length of the form labels).
Here’s how to do it with CSS tables:
<form action="/login" method="post">
<div>
<div>
<label for="username">Username:</label>
<span class="input"><input type="text" name="username" id="username"/></span>
</div>
<div>
<label for="userpass">Password:</label>
<span class="input"><input type="password" name="userpass" id="userpass"/></span>
</div>
<div class="submit">
<label for="login"></label>
<span class="input"><input type="submit" name="login" id="login" value="Login"/></span>
</div>
</div>
</form>
This time, we’re using a mixture of divs and spans as semantically transparent styling hooks. Let’s look at the CSS code.
First, we set up the outer div to display as a table, the inner divs to display as table rows, and the labels and spans as table cells (with right-aligned text):
form > div {
display: table;
}
form > div > div {
display: table-row;
}
form label,
form span {
display: table-cell;
text-align: right;
}
We want the first column of the table to be wide enough to accommodate our labels, but no wider. With CSS float techniques, we had to guess at what that width was likely to be, and adjust it whenever we changed our form labels. With CSS tables, we can simply set the width of the first column to something very small (1em), and then use the white-space property to force the column to the required width:
form label {
white-space: nowrap;
width: 1em;
}
To polish off the layout, we’ll make our text and password fields occupy the full width of the table cells that contain them:
input[type=text],
input[type=password] {
width: 100%;
}
The rest is margins, padding and borders to get the desired look. Check out the finished example.
As the first tool you reach for when approaching any layout task, CSS tables make a lot more sense to your average designer than the cryptic incantations called for by CSS floats. When IE8 is released and all major browsers support CSS tables, we can begin to gradually deploy CSS table-based layouts on sites that are more and more mainstream.
In our new book, Everything You Know About CSS Is Wrong!, Rachel Andrew and I explore in much greater detail how CSS tables work as a page layout tool in the real world. CSS tables have their quirks just like floats do, but they don’t tend to affect common layout tasks, and the workarounds tend to be less fiddly too. Check it out, and get ready for the next big step forward in web design with CSS. |
2008 |
Kevin Yank |
kevinyank |
2008-12-13T00:00:00+00:00 |
https://24ways.org/2008/the-first-tool-you-reach-for/ |
code |
| 121 |
Hide And Seek in The Head |
If you want your JavaScript-enhanced pages to remain accessible and understandable to scripted and noscript users alike, you have to think before you code. Which functionalities are required (ie. should work without JavaScript)? Which ones are merely nice-to-have (ie. can be scripted)? You should only start creating the site when you’ve taken these decisions.
Special HTML elements
Once you have a clear idea of what will work with and without JavaScript, you’ll likely find that you need a few HTML elements for the noscript version only.
Take this example: A form has a nifty bit of Ajax that automatically and silently sends a request once the user enters something in a form field. However, in order to preserve accessibility, the user should also be able to submit the form normally. So the form should have a submit button in noscript browsers, but not when the browser supports sufficient JavaScript.
Since the button is meant for noscript browsers, it must be hard-coded in the HTML:
<input type="submit" value="Submit form" id="noScriptButton" />
When JavaScript is supported, it should be removed:
var checkJS = [check JavaScript support];
window.onload = function () {
if (!checkJS) return;
document.getElementById('noScriptButton').style.display = 'none';
}
Problem: the load event
Although this will likely work fine in your testing environment, it’s not completely correct. What if a user with a modern, JavaScript-capable browser visits your page, but has to wait for a huge graphic to load? The load event fires only after all assets, including images, have been loaded. So this user will first see a submit button, but then all of a sudden it’s removed. That’s potentially confusing.
Fortunately there’s a simple solution: play a bit of hide and seek in the <head>:
var checkJS = [check JavaScript support];
if (checkJS) {
document.write('<style>#noScriptButton{display: none}</style>');
}
First, check if the browser supports enough JavaScript. If it does, document.write an extra <style> element that hides the button.
The difference with the previous technique is that the document.write command is outside any function, and is therefore executed while the JavaScript is being parsed. Thus, the #noScriptButton{display: none} rule is written into the document before the actual HTML is received.
That’s exactly what we want. If the rule is already present at the moment the HTML for the submit button is received and parsed, the button is hidden immediately. Even if the user (and the load event) have to wait for a huge image, the button is already hidden, and both scripted and noscript users see the interface they need, without any potentially confusing flashes of useless content.
In general, if you want to hide content that’s not relevant to scripted users, give the hide command in CSS, and make sure it’s given before the HTML element is loaded and parsed.
Alternative
Some people won’t like to use document.write. They could also add an empty <link /> element to the <head> and give it an href attribute once the browser’s JavaScript capabilities have been evaluated. The <link /> element is made to refer to a style sheet that contains the crucial #noScriptButton{display: none}, and everything works fine.
Important note: The script needs access to the <link />, and the only way to ensure that access is to include the empty <link /> element before your <script> tag. |
2006 |
Peter-Paul Koch |
ppk |
2006-12-06T00:00:00+00:00 |
https://24ways.org/2006/hide-and-seek-in-the-head/ |
code |
| 124 |
Writing Responsible JavaScript |
Without a doubt, JavaScript has been making something of a comeback in the last year. If you’re involved in client-side development in any way at all, chances are that you’re finding yourself writing more JavaScript now than you have in a long time.
If you learned most of your JavaScript back when DHTML was all the rage and before DOM Scripting was in vogue, there have been some big shifts in the way scripts are written. Most of these are in the way event handlers are assigned and functions declared. Both of these changes are driven by the desire to write scripts that are responsible page citizens, both in not tying behaviour to content and in taking care not to conflict with other scripts. I thought it may be useful to look at some of these more responsible approaches to learn how to best write scripts that are independent of the page content and are safely portable between different applications.
Event Handling
Back in the heady days of Web 1.0, if you wanted to have an object on the page react to something like a click, you would simply go ahead and attach an onclick attribute. This was easy and understandable, but much like the font tag or the style attribute, it has the downside of mixing behaviour or presentation in with our content. As we’re learned with CSS, there are big benefits in keeping those layers separate. Hey, if it works for CSS, it should work for JavaScript too.
Just like with CSS, instead of adding an attribute to our element within the document, the more responsible way to do that is to look for the item from your script (like CSS does with a selector) and then assign the behaviour to it. To give an example, take this oldskool onclick use case:
<a id="anim-link" href="#" onclick="playAnimation()">Play the animation</a>
This could be rewritten by removing the onclick attribute, and instead doing the following from within your JavaScript.
document.getElementById('anim-link').onclick = playAnimation;
It’s all in the timing
Of course, it’s never quite that easy. To be able to attach that onclick, the element you’re targeting has to exist in the page, and the page has to have finished loading for the DOM to be available. This is where the onload event is handy, as it fires once everything has finished loading. Common practise is to have a function called something like init() (short for initialise) that sets up all these event handlers as soon as the page is ready.
Back in the day we would have used the onload attibute on the <body> element to do this, but of course what we really want is:
window.onload = init;
As an interesting side note, we’re using init here rather than init() so that the function is assigned to the event. If we used the parentheses, the init function would have been run at that moment, and the result of running the function (rather than the function itself) would be assigned to the event. Subtle, but important.
As is becoming apparent, nothing is ever simple, and we can’t just go around assigning our initialisation function to window.onload. What if we’re using other scripts in the page that might also want to listen out for that event? Whichever script got there last would overwrite everything that came before it. To manage this, we need a script that checks for any existing event handlers, and adds the new handler to it. Most of the JavaScript libraries have their own systems for doing this. If you’re not using a library, Simon Willison has a good stand-alone example
function addLoadEvent(func) {
var oldonload = window.onload;
if (typeof window.onload != 'function') {
window.onload = func;
} else {
window.onload = function() {
if (oldonload) {
oldonload();
}
func();
}
}
}
Obviously this is just a toe in the events model’s complex waters. Some good further reading is PPK’s Introduction to Events.
Carving out your own space
Another problem that rears its ugly head when combining multiple scripts on a single page is that of making sure that the scripts don’t conflict. One big part of that is ensuring that no two scripts are trying to create functions or variables with the same names. Reusing a name in JavaScript just over-writes whatever was there before it.
When you create a function in JavaScript, you’ll be familiar with doing something like this.
function foo() {
... goodness ...
}
This is actually just creating a variable called foo and assigning a function to it. It’s essentially the same as the following.
var foo = function() {
... goodness ...
}
This name foo is by default created in what’s known as the ‘global namespace’ – the general pool of variables within the page. You can quickly see that if two scripts use foo as a name, they will conflict because they’re both creating those variables in the global namespace.
A good solution to this problem is to add just one name into the global namespace, make that one item either a function or an object, and then add everything else you need inside that. This takes advantage of JavaScript’s variable scoping to contain you mess and stop it interfering with anyone else.
Creating An Object
Say I was wanting to write a bunch of functions specifically for using on a site called ‘Foo Online’. I’d want to create my own object with a name I think is likely to be unique to me.
var FOOONLINE = {};
We can then start assigning functions are variables to it like so:
FOOONLINE.message = 'Merry Christmas!';
FOOONLINE.showMessage = function() {
alert(this.message);
};
Calling FOOONLINE.showMessage() in this example would alert out our seasonal greeting. The exact same thing could also be expressed in the following way, using the object literal syntax.
var FOOONLINE = {
message: 'Merry Christmas!',
showMessage: function() {
alert(this.message);
}
};
Creating A Function to Create An Object
We can extend this idea bit further by using a function that we run in place to return an object. The end result is the same, but this time we can use closures to give us something like private methods and properties of our object.
var FOOONLINE = function(){
var message = 'Merry Christmas!';
return {
showMessage: function(){
alert(message);
}
}
}();
There are two important things to note here. The first is the parentheses at the end of line 10. Just as we saw earlier, this runs the function in place and causes its result to be assigned. In this case the result of our function is the object that is returned at line 4.
The second important thing to note is the use of the var keyword on line 2. This ensures that the message variable is created inside the scope of the function and not in the global namespace. Because of the way closure works (which if you’re not familiar with, just suspend your disbelief for a moment) that message variable is visible to everything inside the function but not outside. Trying to read FOOONLINE.message from the page would return undefined.
This is useful for simulating the concept of private class methods and properties that exist in other programming languages. I like to take the approach of making everything private unless I know it’s going to be needed from outside, as it makes the interface into your code a lot clearer for someone else to read.
All Change, Please
So that was just a whistle-stop tour of a couple of the bigger changes that can help to make your scripts better page citizens. I hope it makes useful Sunday reading, but obviously this is only the tip of the iceberg when it comes to designing modular, reusable code.
For some, this is all familiar ground already. If that’s the case, I encourage you to perhaps submit a comment with any useful resources you’ve found that might help others get up to speed. Ultimately it’s in all of our interests to make sure that all our JavaScript interoperates well – share your tips. |
2006 |
Drew McLellan |
drewmclellan |
2006-12-10T00:00:00+00:00 |
https://24ways.org/2006/writing-responsible-javascript/ |
code |
| 126 |
Intricate Fluid Layouts in Three Easy Steps |
The Year of the Script may have drawn attention away from CSS but building fluid, multi-column, cross-browser CSS layouts can still be as unpleasant as a lump of coal. Read on for a worry-free approach in three quick steps.
The layout system I developed, YUI Grids CSS, has three components. They can be used together as we’ll see, or independently.
The Three Easy Steps
Choose fluid or fixed layout, and choose the width (in percents or pixels) of the page.
Choose the size, orientation, and source-order of the main and secondary blocks of content.
Choose the number of columns and how they distribute (for example 50%-50% or 25%-75%), using stackable and nestable grid structures.
The Setup
There are two prerequisites: We need to normalize the size of an em and opt into the browser rendering engine’s Strict Mode.
Ems are a superior unit of measure for our case because they represent the current font size and grow as the user increases their font size setting. This flexibility—the container growing with the user’s wishes—means larger text doesn’t get crammed into an unresponsive container. We’ll use YUI Fonts CSS to set the base size because it provides consistent-yet-adaptive font-sizes while preserving user control.
The second prerequisite is to opt into Strict Mode (more info on rendering modes) by declaring a Doctype complete with URI. You can choose XHTML or HTML, and Transitional or Strict. I prefer HTML 4.01 Strict, which looks like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
Including the CSS
A single small CSS file powers a nearly-infinite number of layouts thanks to a recursive system and the interplay between the three distinct components. You could prune to a particular layout’s specific needs, but why bother when the complete file weighs scarcely 1.8kb uncompressed? Compressed, YUI Fonts and YUI Grids combine for a miniscule 0.9kb over the wire.
You could save an HTTP request by concatenating the two CSS files, or by adding their contents to your own CSS, but I’ll keep them separate for now:
<link href="fonts.css" rel="stylesheet" type="text/css">
<link href="grids.css" rel="stylesheet" type="text/css">
Example: The Setup
Now we’re ready to build some layouts.
Step 1: Choose Fluid or Fixed Layout
Choose between preset widths of 750px, 950px, and 100% by giving a document-wrapping div an ID of doc, doc2, or doc3. These options cover most use cases, but it’s easy to define a custom fixed width.
The fluid 100% grid (doc3) is what I’ve been using almost exclusively since it was introduced in the last YUI released.
<body>
<div id="doc3"></div>
</body>
All pages are centered within the viewport, and grow with font size. The 100% width page (doc3) preserves 10px of breathing room via left and right margins. If you prefer your content flush to the viewport, just add doc3 {margin:auto} to your CSS.
Regardless of what you choose in the other two steps, you can always toggle between these widths and behaviors by simply swapping the ID value. It’s really that simple.
Example: 100% fluid layout
Step 2: Choose a Template Preset
This is perhaps the most frequently omitted step (they’re all optional), but I use it nearly every time. In a source-order-independent way (good for accessibility and SEO), “Template Presets” provide commonly used template widths compatible with ad-unit dimension standards defined by the Interactive Advertising Bureau, an industry association.
Choose between the six Template Presets (.yui-t1 through .yui-t6) by setting the class value on the document-wrapping div established in Step 1. Most frequently I use yui-t3, which puts the narrow secondary block on the left and makes it 300px wide.
<body>
<div id="doc3" class="yui-t3"></div>
</body>
The Template Presets control two “blocks” of content, which are defined by two divs, each with yui-b (“b” for “block”) class values. Template Presets describe the width and orientation of the secondary block; the main block will take up the rest of the space.
<body>
<div id="doc3" class="yui-t3">
<div class="yui-b"></div>
<div class="yui-b"></div>
</div>
</body>
Use a wrapping div with an ID of yui-main to structurally indicate which block is the main block. This wrapper—not the source order—identifies the main block.
<body>
<div id="doc3" class="yui-t3">
<div id="yui-main">
<div class="yui-b"></div>
</div>
<div class="yui-b"></div>
</div>
</body>
Example: Main and secondary blocks sized and oriented with .yui-t3 Template Preset
Again, regardless of what values you choose in the other steps, you can always toggle between these Template Presets by toggling the class value of your document-wrapping div. It’s really that simple.
Step 3: Nest and Stack Grid Structures.
The bulk of the power of the system is in this third step. The key is that columns are built by parents telling children how to behave. By default, two children each consume half of their parent’s area. Put two units inside a grid structure, and they will sit side-by-side, and they will each take up half the space. Nest this structure and two columns become four. Stack them for rows of columns.
An Even Number of Columns
The default behavior creates two evenly-distributed columns. It’s easy. Define one parent grid with .yui-g (“g” for grid) and two child units with .yui-u (“u” for unit). The code looks like this:
<div class="yui-g">
<div class="yui-u first"></div>
<div class="yui-u"></div>
</div>
Be sure to indicate the “first“ unit because the :first-child pseudo-class selector isn’t supported across all A-grade browsers. It’s unfortunate we need to add this, but luckily it’s not out of place in the markup layer since it is structural information.
Example: Two evenly-distributed columns in the main content block
An Odd Number of Columns
The default system does not work for an odd number of columns without using the included “Special Grids” classes. To create three evenly distributed columns, use the “yui-gb“ Special Grid:
<div class="yui-gb">
<div class="yui-u first"></div>
<div class="yui-u"></div>
<div class="yui-u"></div>
</div>
Example: Three evenly distributed columns in the main content block
Uneven Column Distribution
Special Grids are also used for unevenly distributed column widths. For example, .yui-ge tells the first unit (column) to take up 75% of the parent’s space and the other unit to take just 25%.
<div class="yui-ge">
<div class="yui-u first"></div>
<div class="yui-u"></div>
</div>
Example: Two columns in the main content block split 75%-25%
Putting It All Together
Start with a full-width fluid page (div#doc3). Make the secondary block 180px wide on the right (div.yui-t4). Create three rows of columns: Three evenly distributed columns in the first row (div.yui-gb), two uneven columns (66%-33%) in the second row (div.yui-gc), and two evenly distributed columns in the thrid row.
<body>
<!-- choose fluid page and Template Preset -->
<div id="doc3" class="yui-t4">
<!-- main content block -->
<div id="yui-main">
<div class="yui-b">
<!-- stacked grid structure, Special Grid "b" -->
<div class="yui-gb">
<div class="yui-u first"></div>
<div class="yui-u"></div>
<div class="yui-u"></div>
</div>
<!-- stacked grid structure, Special Grid "c" -->
<div class="yui-gc">
<div class="yui-u first"></div>
<div class="yui-u"></div>
</div>
<!-- stacked grid structure -->
<div class="yui-g">
<div class="yui-u first"></div>
<div class="yui-u"></div>
</div>
</div>
</div>
<!-- secondary content block -->
<div class="yui-b"></div>
</div>
</body>
Example: A complex layout.
Wasn’t that easy? Now that you know the three “levers” of YUI Grids CSS, you’ll be creating headache-free fluid layouts faster than you can say “Peace on Earth”. |
2006 |
Nate Koechley |
natekoechley |
2006-12-20T00:00:00+00:00 |
https://24ways.org/2006/intricate-fluid-layouts/ |
code |
| 128 |
Boost Your Hyperlink Power |
There are HTML elements and attributes that we use every day. Headings, paragraphs, lists and images are the mainstay of every Web developer’s toolbox. Perhaps the most common tool of all is the anchor. The humble a element is what joins documents together to create the gloriously chaotic collection we call the World Wide Web.
Anatomy of an Anchor
The power of the anchor element lies in the href attribute, short for hypertext reference. This creates a one-way link to another resource, usually another page on the Web:
<a href="http://allinthehead.com/">
The href attribute sits in the opening a tag and some descriptive text sits between the opening and closing tags:
<a href="http://allinthehead.com/">Drew McLellan</a>
“Whoop-dee-freakin’-doo,” I hear you say, “this is pretty basic stuff” – and you’re quite right. But there’s more to the anchor element than just the href attribute.
The Theory of relativity
You might be familiar with the rel attribute from the link element. I bet you’ve got something like this in the head of your documents:
<link rel="stylesheet" type="text/css" media="screen" href="styles.css" />
The rel attribute describes the relationship between the linked document and the current document. In this case, the value of rel is “stylesheet”. This means that the linked document is the stylesheet for the current document: that’s its relationship.
Here’s another common use of rel:
<link rel="alternate" type="application/rss+xml" title="my RSS feed" href="index.xml" />
This describes the relationship of the linked file – an RSS feed – as “alternate”: an alternate view of the current document.
Both of those examples use the link element but you are free to use the rel attribute in regular hyperlinks. Suppose you’re linking to your RSS feed in the body of your page:
Subscribe to <a href="index.xml">my RSS feed</a>.
You can add extra information to this anchor using the rel attribute:
Subscribe to <a href="index.xml" rel="alternate" type="application/rss+xml">my RSS feed</a>.
There’s no prescribed list of values for the rel attribute so you can use whatever you decide is semantically meaningful. Let’s say you’ve got a complex e-commerce application that includes a link to a help file. You can explicitly declare the relationship of the linked file as being “help”:
<a href="help.html" rel="help">need help?</a>
Elemental Microformats
Although it’s completely up to you what values you use for the rel attribute, some consensus is emerging in the form of microformats. Some of the simplest microformats make good use of rel. For example, if you are linking to a license that covers the current document, use the rel-license microformat:
Licensed under a <a href="http://creativecommons.org/licenses/by/2.0/" rel="license">Creative Commons attribution license</a>
That describes the relationship of the linked document as “license.”
The rel-tag microformat goes a little further. It uses rel to describe the final part of the URL of the linked file as a “tag” for the current document:
Learn more about <a href="http://en.wikipedia.org/wiki/Microformats" rel="tag">semantic markup</a>
This states that the current document is being tagged with the value “Microformats.”
XFN, which stands for XHTML Friends Network, is a way of describing relationships between people:
<a href="http://allinthehead.com/" rel="friend">Drew McLellan</a>
This microformat makes use of a very powerful property of the rel attribute. Like the class attribute, rel can take multiple values, separated by spaces:
<a href="http://allinthehead.com/" rel="friend met colleague">Drew McLellan</a>
Here I’m describing Drew as being a friend, someone I’ve met, and a colleague (because we’re both Web monkies).
You Say You Want a revolution
While rel describes the relationship of the linked resource to the current document, the rev attribute describes the reverse relationship: it describes the relationship of the current document to the linked resource. Here’s an example of a link that might appear on help.html:
<a href="shoppingcart.html" rev="help">continue shopping</a>
The rev attribute declares that the current document is “help” for the linked file.
The vote-links microformat makes use of the rev attribute to allow you to qualify your links. By using the value “vote-for” you can describe your document as being an endorsement of the linked resource:
I agree with <a href="http://richarddawkins.net/home" rev="vote-for">Richard Dawkins</a>.
There’s a corresponding vote-against value. This means that you can link to a document but explicitly state that you don’t agree with it.
I agree with <a href="http://richarddawkins.net/home" rev="vote-for">Richard Dawkins</a>
about those <a href="http://www.icr.org/" rev="vote-against">creationists</a>.
Of course there’s nothing to stop you using both rel and rev on the same hyperlink:
<a href="http://richarddawkins.net/home" rev="vote-for" rel="muse">Richard Dawkins</a>
The Wisdom of Crowds
The simplicity of rel and rev belies their power. They allow you to easily add extra semantic richness to your hyperlinks. This creates a bounty that can be harvested by search engines, aggregators and browsers. Make it your New Year’s resolution to make friends with these attributes and extend the power of hypertext. |
2006 |
Jeremy Keith |
jeremykeith |
2006-12-18T00:00:00+00:00 |
https://24ways.org/2006/boost-your-hyperlink-power/ |
code |
| 129 |
Knockout Type - Thin Is Always In |
OS X has gorgeous native anti-aliasing (although I will admit to missing 10px aliased Geneva — *sigh*). This is especially true for dark text on a light background. However, things can go awry when you start using light text on a dark background. Strokes thicken. Counters constrict. Letterforms fill out like seasonal snackers.
So how do we combat the fat? In Safari and other Webkit-based browsers we can use the CSS ‘text-shadow’ property. While trying to add a touch more contrast to the navigation on haveamint.com I noticed an interesting side-effect on the weight of the type.
The second line in the example image above has the following style applied to it:
This creates an invisible drop-shadow. (Why is it invisible? The shadow is positioned directly behind the type (the first two zeros) and has no spread (the third zero). So the color, black, is completely eclipsed by the type it is supposed to be shadowing.)
Why applying an invisible drop-shadow effectively lightens the weight of the type is unclear. What is clear is that our light-on-dark text is now of a comparable weight to its dark-on-light counterpart.
You can see this trick in effect all over ShaunInman.com and in the navigation on haveamint.com and Subtraction.com. The HTML and CSS source code used to create the example images used in this article can be found here. |
2006 |
Shaun Inman |
shauninman |
2006-12-17T00:00:00+00:00 |
https://24ways.org/2006/knockout-type/ |
code |
| 132 |
Tasty Text Trimmer |
In most cases, when designing a user interface it’s best to make a decision about how data is best displayed and stick with it. Failing to make a decision ultimately leads to too many user options, which in turn can be taxing on the poor old user.
Under some circumstances, however, it’s good to give the user freedom in customising their workspace. One good example of this is the ‘Article Length’ tool in Apple’s Safari RSS reader. Sliding a slider left of right dynamically changes the length of each article shown. It’s that kind of awesomey magic stuff that’s enough to keep you from sleeping. Let’s build one.
The Setup
Let’s take a page that has lots of long text items, a bit like a news page or like Safari’s RSS items view. If we were to attach a class name to each element we wanted to resize, that would give us something to hook onto from the JavaScript.
Example 1: The basic page.
As you can see, I’ve wrapped my items in a DIV and added a class name of chunk to them. It’s these chunks that we’ll be finding with the JavaScript. Speaking of which …
Our Core Functions
There are two main tasks that need performing in our script. The first is to find the chunks we’re going to be resizing and store their original contents away somewhere safe. We’ll need this so that if we trim the text down we’ll know what it was if the user decides they want it back again. We’ll call this loadChunks.
var loadChunks = function(){
var everything = document.getElementsByTagName('*');
var i, l;
chunks = [];
for (i=0, l=everything.length; i<l; i++){
if (everything[i].className.indexOf(chunkClass) > -1){
chunks.push({
ref: everything[i],
original: everything[i].innerHTML
});
}
}
};
The variable chunks is stored outside of this function so that we can access it from our next core function, which is doTrim.
var doTrim = function(interval) {
if (!chunks) loadChunks();
var i, l;
for (i=0, l=chunks.length; i<l; i++){
var a = chunks[i].original.split(' ');
a = a.slice(0, interval);
chunks[i].ref.innerHTML = a.join(' ');
}
};
The first thing that needs to be done is to call loadChunks if the chunks variable isn’t set. This should only happen the first time doTrim is called, as from that point the chunks will be loaded.
Then all we do is loop through the chunks and trim them. The trimming itself (lines 6-8) is very simple. We split the text into an array of words (line 6), then select only a portion from the beginning of the array up until the number we want (line 7). Finally the words are glued back together (line 8).
In essense, that’s it, but it leaves us needing to know how to get the number into this function in the first place, and how that number is generated by the user. Let’s look at the latter case first.
The YUI Slider Widget
There are lots of JavaScript libraries available at the moment. A fair few of those are really good. I use the Yahoo! User Interface Library professionally, but have only recently played with their pre-build slider widget. Turns out, it’s pretty good and perfect for this task.
Once you have the library files linked in (check the docs linked above) it’s fairly straightforward to create yourself a slider.
slider = YAHOO.widget.Slider.getHorizSlider("sliderbg", "sliderthumb", 0, 100, 5);
slider.setValue(50);
slider.subscribe("change", doTrim);
All that’s needed then is some CSS to make the slider look like a slider, and of course a few bits of HTML. We’ll see those later.
See It Working!
Rather than spell out all the nuts and bolts of implementing this fairly simple script, let’s just look at in it action and then pick on some interesting bits I’ve added.
Example 2: Try the Tasty Text Trimmer.
At the top of the JavaScript file I’ve added a small number of settings.
var chunkClass = 'chunk';
var minValue = 10;
var maxValue = 100;
var multiplier = 5;
Obvious candidates for configuration are the class name used to find the chunks, and also the some minimum and maximum values. The minValue is the fewest number of words we wish to display when the slider is all the way down. The maxValue is the length of the slider, in this case 100.
Moving the slider makes a call to our doTrim function with the current value of the slider. For a slider 100 pixels long, this is going to be in the range of 0-100. That might be okay for some things, but for longer items of text you’ll want to allow for displaying more than 100 words. I’ve accounted for this by adding in a multiplier – in my code I’m multiplying the value by 5, so a slider value of 50 shows 250 words. You’ll probably want to tailor the multiplier to the type of content you’re using.
Keeping it Accessible
This effect isn’t something we can really achieve without JavaScript, but even so we must make sure that this functionality has no adverse impact on the page when JavaScript isn’t available. This is achieved by adding the slider markup to the page from within the insertSliderHTML function.
var insertSliderHTML = function(){
var s = '<a id="slider-less" href="#less"><img src="icon_min.gif" width="10" height="10" alt="Less text" class="first" /></a>';
s +=' <div id="sliderbg"><div id="sliderthumb"><img src="sliderthumbimg.gif" /></div></div>';
s +=' <a id="slider-more" href="#more"><img src="icon_max.gif" width="10" height="10" alt="More text" /></a>';
document.getElementById('slider').innerHTML = s;
}
The other important factor to consider is that a slider can be tricky to use unless you have good eyesight and pretty well controlled motor skills. Therefore we should provide a method of changing the value by the keyboard.
I’ve done this by making the icons at either end of the slider links so they can be tabbed to. Clicking on either icon fires the appropriate JavaScript function to show more or less of the text.
In Conclusion
The upshot of all this is that without JavaScript the page just shows all the text as it normally would. With JavaScript we have a slider for trimming the text excepts that can be controlled with the mouse or with a keyboard.
If you’re like me and have just scrolled to the bottom to find the working demo, here it is again:
Try the Tasty Text Trimmer
Trimmer for Christmas? Don’t say I never give you anything! |
2006 |
Drew McLellan |
drewmclellan |
2006-12-01T00:00:00+00:00 |
https://24ways.org/2006/tasty-text-trimmer/ |
code |
| 135 |
A Scripting Carol |
We all know the stories of the Ghost of Scripting Past – a time when the web was young and littered with nefarious scripting, designed to bestow ultimate control upon the developer, to pollute markup with event handler after event handler, and to entrench advertising in the minds of all that gazed upon her.
And so it came to be that JavaScript became a dirty word, thrown out of solutions by many a Scrooge without regard to the enhancements that JavaScript could bring to any web page. JavaScript, as it was, was dead as a door-nail.
With the arrival of our core philosophy that all standardistas hold to be true: “separate your concerns – content, presentation and behaviour,” we are in a new era of responsible development the Web Standards Way™. Or are we? Have we learned from the Ghosts of Scripting Past? Or are we now faced with new problems that come with new ways of implementing our solutions?
The Ghost of Scripting Past
If the Ghost of Scripting Past were with us it would probably say:
You must remember your roots and where you came from, and realize the misguided nature of your early attempts for control. That person you see down there, is real and they are the reason you exist in the first place… without them, you are nothing.
In many ways we’ve moved beyond the era of control and we do take into account the user, or at least much more so than we used to. Sadly – there is one advantage that old school inline event handlers had where we assigned and reassigned CSS style property values on the fly – we knew that if JavaScript wasn’t supported, the styles wouldn’t be added because we ended up doing them at the same time.
If anything, we need to have learned from the past that just because it works for us doesn’t mean it is going to work for anyone else – we need to test more scenarios than ever to observe the multitude of browsing arrangements we’ll observe: CSS on with JavaScript off, CSS off/overridden with JavaScript on, both on, both off/not supported. It is a situation that is ripe for conflict.
This may shock some of you, but there was a time when testing was actually easier: back in the day when Netscape 4 was king. Yes, that’s right. I actually kind of enjoyed Netscape 4 (hear me out, please). With NS4’s CSS implementation known as JavaScript Style Sheets, you knew that if JavaScript was off the styles were off too.
The Ghost of Scripting Present
With current best practice – we keep our CSS and JavaScript separate from each other. So what happens when some of our fancy, unobtrusive DOM Scripting doesn’t play nicely with our wonderfully defined style rules?
Lets look at one example of a collapsing and expanding menu to illustrate where we are now:
Simple Collapsing/Expanding Menu Example
We’re using some simple JavaScript (I’m using jquery in this case) to toggle between a CSS state for expanded and not expanded:
JavaScript
$(document).ready(function(){
TWOFOURWAYS.enableTree();
});
var TWOFOURWAYS = new Object();
TWOFOURWAYS.enableTree = function ()
{
$("ul li a").toggle(function(){
$(this.parentNode).addClass("expanded");
}, function() {
$(this.parentNode).removeClass("expanded");
});
return false;
}
CSS
ul li ul {
display: none;
}
ul li.expanded ul {
display: block;
}
At this point we’ve separated our presentation from our content and behaviour, and all is well, right?
Not quite.
Here’s where I typically see failures in the assessment work that I do on web sites and applications (Yes, call me Scrooge – I don’t care!). We know our page needs to work with or without scripting, and we know it needs to work with or without CSS. All too often the testing scenarios don’t take into account combinations.
Testing it out
So what happens when we test this? Make sure you test with:
CSS off
JavaScript off
Use the simple example again.
With CSS off, we revert to a simple nested list of links and all functionality is maintained. With JavaScript off, however, we run into a problem – we have now removed the ability to expand the menu using the JavaScript triggered CSS change.
Hopefully you see the problem – we have a JavaScript and CSS dependency that is critical to the functionality of the page. Unobtrusive scripting and binary on/off tests aren’t enough. We need more.
This Ghost of Scripting Present sighting is seen all too often.
Lets examine the JavaScript off scenario a bit further – if we require JavaScript to expand/show the branch of the tree we should use JavaScript to hide them in the first place. That way we guarantee functionality in all scenarios, and have achieved our baseline level of interoperability.
To revise this then, we’ll start with the sub items expanded, use JavaScript to collapse them, and then use the same JavaScript to expand them.
HTML
<ul>
<li><a href="#">Main Item</a>
<ul class="collapseme">
<li><a href="#">Sub item 1</a></li>
<li><a href="#">Sub item 2</a></li>
<li><a href="#">Sub item 3</a></li>
</ul>
</li>
</ul>
CSS
/* initial style is expanded */
ul li ul.collapseme {
display: block;
}
JavaScript
// remove the class collapseme after the page loads
$("ul ul.collapseme").removeClass("collapseme");
And there you have it – a revised example with better interoperability.
This isn’t rocket surgery by any means. It is a simple solution to a ghostly problem that is too easily overlooked (and often is).
The Ghost of Scripting Future
Well, I’m not so sure about this one, but I’m guessing that in a few years’ time, we’ll all have seen a few more apparitions and have a few more tales to tell. And hopefully we’ll be able to share them on 24 ways.
Thanks to Drew for the invitation to contribute and thanks to everyone else out there for making this a great (and haunting) year on the web! |
2006 |
Derek Featherstone |
derekfeatherstone |
2006-12-21T00:00:00+00:00 |
https://24ways.org/2006/a-scripting-carol/ |
code |
| 136 |
Making XML Beautiful Again: Introducing Client-Side XSL |
Remember that first time you saw XML and got it? When you really understood what was possible and the deep meaning each element could carry? Now when you see XML, it looks ugly, especially when you navigate to a page of XML in a browser. Well, with every modern browser now supporting XSL 1.0, I’m going to show you how you can turn something as simple as an ATOM feed into a customised page using a browser, Notepad and some XSL.
What on earth is this XSL?
XSL is a family of recommendations for defining XML document transformation and presentation. It consists of three parts:
XSLT 1.0 – Extensible Stylesheet Language Transformation, a language for transforming XML
XPath 1.0 – XML Path Language, an expression language used by XSLT to access or refer to parts of an XML document. (XPath is also used by the XML Linking specification)
XSL-FO 1.0 – Extensible Stylesheet Language Formatting Objects, an XML vocabulary for specifying formatting semantics
XSL transformations are usually a one-to-one transformation, but with newer versions (XSL 1.1 and XSL 2.0) its possible to create many-to-many transformations too. So now you have an overview of XSL, on with the show…
So what do I need?
So to get going you need a browser an supports client-side XSL transformations such as Firefox, Safari, Opera or Internet Explorer. Second, you need a source XML file – for this we’re going to use an ATOM feed from Flickr.com. And lastly, you need an editor of some kind. I find Notepad++ quick for short XSLs, while I tend to use XMLSpy or Oxygen for complex XSL work.
Because we’re doing a client-side transformation, we need to modify the XML file to tell it where to find our yet-to-be-written XSL file. Take a look at the source XML file, which originates from my Flickr photos tagged sky, in ATOM format.
The top of the ATOM file now has an additional <?xml-stylesheet /> instruction, as can been seen on Line 2 below. This instructs the browser to use the XSL file to transform the document.
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<?xml-stylesheet type="text/xsl" href="flickr_transform.xsl"?>
<feed xmlns="http://www.w3.org/2005/Atom"
xmlns:dc="http://purl.org/dc/elements/1.1/">
Your first transformation
Your first XSL will look something like this:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:atom="http://www.w3.org/2005/Atom"
xmlns:dc="http://purl.org/dc/elements/1.1/">
<xsl:output method="html" encoding="utf-8"/>
</xsl:stylesheet>
This is pretty much the starting point for most XSL files. You will notice the standard XML processing instruction at the top of the file (line 1). We then switch into XSL mode using the XSL namespace on all XSL elements (line 2). In this case, we have added namespaces for ATOM (line 4) and Dublin Core (line 5). This means the XSL can now read and understand those elements from the source XML.
After we define all the namespaces, we then move onto the xsl:output element (line 6). This enables you to define the final method of output. Here we’re specifying html, but you could equally use XML or Text, for example. The encoding attributes on each element do what they say on the tin. As with all XML, of course, we close every element including the root.
The next stage is to add a template, in this case an <xsl:template /> as can be seen below:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:atom="http://www.w3.org/2005/Atom"
xmlns:dc="http://purl.org/dc/elements/1.1/">
<xsl:output method="html" encoding="utf-8"/>
<xsl:template match="/">
<html>
<head>
<title>Making XML beautiful again : Transforming ATOM</title>
</head>
<body>
<xsl:apply-templates select="/atom:feed"/>
</body>
</html>
</xsl:template>
</xsl:stylesheet>
The beautiful thing about XSL is its English syntax, if you say it out loud it tends to make sense.
The / value for the match attribute on line 8 is our first example of XPath syntax. The expression / matches any element – so this <xsl:template/> will match against any element in the document. As the first element in any XML document is the root element, this will be the one matched and processed first.
Once we get past our standard start of a HTML document, the only instruction remaining in this <xsl:template/> is to look for and match all <atom:feed/> elements using the <xsl:apply-templates/> in line 14, above.
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:atom="http://www.w3.org/2005/Atom"
xmlns:dc="http://purl.org/dc/elements/1.1/">
<xsl:output method="html" encoding="utf-8"/>
<xsl:template match="/">
<xsl:apply-templates select="/atom:feed"/>
</xsl:template>
<xsl:template match="/atom:feed">
<div id="content">
<h1>
<xsl:value-of select="atom:title"/>
</h1>
<p>
<xsl:value-of select="atom:subtitle"/>
</p>
<ul id="entries">
<xsl:apply-templates select="atom:entry"/>
</ul>
</div>
</xsl:template>
</xsl:stylesheet>
This new template (line 12, above) matches <feed/> and starts to write the new HTML elements out to the output stream. The <xsl:value-of/> does exactly what you’d expect – it finds the value of the item specifed in its select attribute. With XPath you can select any element or attribute from the source XML.
The last part is a repeat of the now familiar <xsl:apply-templates/> from before, but this time we’re using it inside of a called template. Yep, XSL is full of recursion…
<xsl:template match="atom:entry">
<li class="entry">
<h2>
<a href="{atom:link/@href}">
<xsl:value-of select="atom:title"/>
</a>
</h2>
<p class="date">
(<xsl:value-of select="substring-before(atom:updated,'T')"/>)
</p>
<p class="content">
<xsl:value-of select="atom:content" disable-output-escaping="yes"/>
</p>
<xsl:apply-templates select="atom:category"/>
</li>
</xsl:template>
The <xsl:template/> which matches atom:entry (line 1) occurs every time there is a <entry/> element in the source XML file. So in total that is 20 times, this is naturally why XSLT is full of recursion. This <xsl:template/> has been matched and therefore called higher up in the document, so we can start writing list elements directly to the output stream. The first part is simply a <h2/> with a link wrapped within it (lines 3-7). We can select attributes using XPath using @.
The second part of this template selects the date, but performs a XPath string function on it. This means that we only get the date and not the time from the string (line 9). This is achieved by getting only the part of the string that exists before the T.
Regular Expressions are not part of the XPath 1.0 string functions, although XPath 2.0 does include them. Because of this, in XSL we tend to rely heavily on the available XML output.
The third part of the template (line 12) is a <xsl:value-of/> again, but this time we use an attribute of <xsl:value-of/> called disable output escaping to turn escaped characters back into XML.
The very last section is another <xsl:apply-template/> call, taking us three templates deep. Do not worry, it is not uncommon to write XSL which go 20 or more templates deep!
<xsl:template match="atom:category">
<xsl:for-each select=".">
<xsl:element name="a">
<xsl:attribute name="rel">
<xsl:text>tag</xsl:text>
</xsl:attribute>
<xsl:attribute name="href">
<xsl:value-of select="concat(@scheme, @term)"/>
</xsl:attribute>
<xsl:value-of select="@term"/>
</xsl:element>
<xsl:text> </xsl:text>
</xsl:for-each>
</xsl:template>
In our final <xsl:template/>, we see a combination of what we have done before with a couple of twists. Once we match atom:category we then count how many elements there are at that same level (line 2). The XPath . means ‘self’, so we count how many category elements are within the <entry/> element.
Following that, we start to output a link with a rel attribute of the predefined text, tag (lines 4-6). In XSL you can just type text, but results can end up with strange whitespace if you do (although there are ways to simply remove all whitespace).
The only new XPath function in this example is concat(), which simply combines what XPaths or text there might be in the brackets. We end the output for this tag with an actual tag name (line 10) and we add a space afterwards (line 12) so it won’t touch the next tag. (There are better ways to do this in XSL using the last() XPath function).
After that, we go back to the <xsl:for-each/> element again if there is another category element, otherwise we end the <xsl:for-each/> loop and end this <xsl:template/>.
A touch of style
Because we’re using recursion through our templates, you will find this is the end of the templates and the rest of the XML will be ignored by the parser. Finally, we can add our CSS to finish up. (I have created one for Flickr and another for News feeds)
<style type="text/css" media="screen">@import "flickr_overview.css?v=001";</style>
So we end up with a nice simple to understand but also quick to write XSL which can be used on ATOM Flickr feeds and ATOM News feeds. With a little playing around with XSL, you can make XML beautiful again.
All the files can be found in the zip file (14k) |
2006 |
Ian Forrester |
ianforrester |
2006-12-07T00:00:00+00:00 |
https://24ways.org/2006/beautiful-xml-with-xsl/ |
code |
| 138 |
Rounded Corner Boxes the CSS3 Way |
If you’ve been doing CSS for a while you’ll know that there are approximately 3,762 ways to create a rounded corner box. The simplest techniques rely on the addition of extra mark-up directly to your page, while the more complicated ones add the mark-up though DOM manipulation. While these techniques are all very interesting, they do seem somewhat of a kludge. The goal of CSS is to separate structure from presentation, yet here we are adding superfluous mark-up to our code in order to create a visual effect. The reason we are doing this is simple. CSS2.1 only allows a single background image per element.
Thankfully this looks set to change with the addition of multiple background images into the CSS3 specification. With CSS3 you’ll be able to add not one, not four, but eight background images to a single element. This means you’ll be able to create all kinds of interesting effects without the need of those additional elements.
While the CSS working group still seem to be arguing over the exact syntax, Dave Hyatt went ahead and implemented the currently suggested mechanism into Safari. The technique is fiendishly simple, and I think we’ll all be a lot better off once the W3C stop arguing over the details and allow browser vendors to get on and provide the tools we need to build better websites.
To create a CSS3 rounded corner box, simply start with your box element and apply your 4 corner images, separated by commas.
.box {
background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right.gif);
}
We don’t want these background images to repeat, which is the normal behaviour, so lets set all their background-repeat properties to no-repeat.
.box {
background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right.gif);
background-repeat: no-repeat, no-repeat, no-repeat, no-repeat;
}
Lastly, we need to define the positioning of each corner image.
.box {
background-image: url(top-left.gif), url(top-right.gif), url(bottom-left.gif), url(bottom-right.gif);
background-repeat: no-repeat, no-repeat, no-repeat, no-repeat;
background-position: top left, top right, bottom left, bottom right;
}
And there we have it, a simple rounded corner box with no additional mark-up.
As well as using multiple background images, CSS3 also has the ability to create rounded corners without the need of any images at all. You can do this by setting the border-radius property to your desired value as seen in the next example.
.box {
border-radius: 1.6em;
}
This technique currently works in Firefox/Camino and creates a nice, if somewhat jagged rounded corner. If you want to create a box that works in both Mozilla and WebKit based browsers, why not combine both techniques and see what happens. |
2006 |
Andy Budd |
andybudd |
2006-12-04T00:00:00+00:00 |
https://24ways.org/2006/rounded-corner-boxes-the-css3-way/ |
code |
| 139 |
Flickr Photos On Demand with getFlickr |
In case you don’t know it yet, Flickr is great. It is a lot of fun to upload, tag and caption photos and it is really handy to get a vast network of contacts through it.
Using Flickr photos outside of it is a bit of a problem though. There is a Flickr API, and you can get almost every page as an RSS feed, but in general it is a bit tricky to use Flickr photos inside your blog posts or web sites. You might not want to get into the whole API game or use a server side proxy script as you cannot retrieve RSS with Ajax because of the cross-domain security settings.
However, Flickr also provides an undocumented JSON output, that can be used to hack your own solutions in JavaScript without having to use a server side script.
If you enter the URL http://flickr.com/photos/tags/panda you get to the flickr page with photos tagged “panda”.
If you enter the URL http://api.flickr.com/services/feeds/photos_public.gne?tags=panda&format=rss_200 you get the same page as an RSS feed.
If you enter the URL http://api.flickr.com/services/feeds/photos_public.gne?tags=panda&format=json you get a JavaScript function called jsonFlickrFeed with a parameter that contains the same data in JSON format
You can use this to easily hack together your own output by just providing a function with the same name. I wanted to make it easier for you, which is why I created the helper getFlickr for you to download and use.
getFlickr for Non-Scripters
Simply include the javascript file getflickr.js and the style getflickr.css in the head of your document:
<script type="text/javascript" src="getflickr.js"></script>
<link rel="stylesheet" href="getflickr.css" type="text/css">
Once this is done you can add links to Flickr pages anywhere in your document, and when you give them the CSS class getflickrphotos they get turned into gallery links. When a visitor clicks these links they turn into loading messages and show a “popup” gallery with the connected photos once they were loaded. As the JSON returned is very small it won’t take long. You can close the gallery, or click any of the thumbnails to view a photo. Clicking the photo makes it disappear and go back to the thumbnails.
Check out the example page and click the different gallery links to see the results.
Notice that getFlickr works with Unobtrusive JavaScript as when scripting is disabled the links still get to the photos on Flickr.
getFlickr for JavaScript Hackers
If you want to use getFlickr with your own JavaScripts you can use its main method leech():
getFlickr.leech(sTag, sCallback);
sTag
the tag you are looking for
sCallback
an optional function to call when the data was retrieved.
After you called the leech() method you have two strings to use:
getFlickr.html[sTag]
contains an HTML list (without the outer UL element) of all the images linked to the correct pages at flickr. The images are the medium size, you can easily change that by replacing _m.jpg with _s.jpg for thumbnails.
getFlickr.tags[sTag]
contains a string of all the other tags flickr users added with the tag you searched for(space separated)
You can call getFlickr.leech() several times when the page has loaded to cache several result feeds before the page gets loaded. This’ll make the photos quicker for the end user to show up. If you want to offer a form for people to search for flickr photos and display them immediately you can use the following HTML:
<form onsubmit="getFlickr.leech(document.getElementById('tag').value, 'populate');return false">
<label for="tag">Enter Tag</label>
<input type="text" id="tag" name="tag" />
<input type="submit" value="energize" />
<h3>Tags:</h3><div id="tags"></div>
<h3>Photos:</h3><ul id="photos"></ul>
</form>
All the JavaScript you’ll need (for a basic display) is this:
function populate(){
var tag = document.getElementById('tag').value;
document.getElementById('photos').innerHTML = getFlickr.html[tag].replace(/_m\.jpg/g,'_s.jpg');
document.getElementById('tags').innerHTML = getFlickr.tags[tag];
return false;
}
Easy as pie, enjoy!
Check out the example page and try the form to see the results. |
2006 |
Christian Heilmann |
chrisheilmann |
2006-12-03T00:00:00+00:00 |
https://24ways.org/2006/flickr-photos-on-demand/ |
code |
| 143 |
Marking Up a Tag Cloud |
Everyone’s doing it.
The problem is, everyone’s doing it wrong.
Harsh words, you might think. But the crimes against decent markup are legion in this area. You see, I’m something of a markup and semantics junkie. So I’m going to analyse some of the more well-known tag clouds on the internet, explain what’s wrong, and then show you one way to do it better.
del.icio.us
I think the first ever tag cloud I saw was on del.icio.us. Here’s how they mark it up.
<div class="alphacloud">
<a href="/tag/.net" class="lb s2">.net</a>
<a href="/tag/advertising" class=" s3">advertising</a>
<a href="/tag/ajax" class=" s5">ajax</a>
...
</div>
Unfortunately, that is one of the worst examples of tag cloud markup I have ever seen. The page states that a tag cloud is a list of tags where size reflects popularity. However, despite describing it in this way to the human readers, the page’s author hasn’t described it that way in the markup. It isn’t a list of tags, just a bunch of anchors in a <div>. This is also inaccessible because a screenreader will not pause between adjacent links, and in some configurations will not announce the individual links, but rather all of the tags will be read as just one link containing a whole bunch of words. Markup crime number one.
Flickr
Ah, Flickr. The darling photo sharing site of the internet, and the biggest blind spot in every standardista’s vision. Forgive it for having atrocious markup and sometimes confusing UI because it’s just so much damn fun to use. Let’s see what they do.
<p id="TagCloud">
<a href="/photos/tags/06/" style="font-size: 14px;">06</a>
<a href="/photos/tags/africa/" style="font-size: 12px;">africa</a>
<a href="/photos/tags/amsterdam/" style="font-size: 14px;">amsterdam</a>
...
</p>
Again we have a simple collection of anchors like del.icio.us, only this time in a paragraph. But rather than using a class to represent the size of the tag they use an inline style. An inline style using a pixel-based font size. That’s so far away from the goal of separating style from content, they might as well use a <font> tag. You could theoretically parse that to extract the information, but you have more work to guess what the pixel sizes represent. Markup crime number two (and extra jail time for using non-breaking spaces purely for visual spacing purposes.)
Technorati
Ah, now. Here, you’d expect something decent. After all, the Overlord of microformats and King of Semantics Tantek Çelik works there. Surely we’ll see something decent here?
<ol class="heatmap">
<li><em><em><em><em><a href="/tag/Britney+Spears">Britney Spears</a></em></em></em></em></li>
<li><em><em><em><em><em><em><em><em><em><a href="/tag/Bush">Bush</a></em></em></em></em></em></em></em></em></em></li>
<li><em><em><em><em><em><em><em><em><em><em><em><em><em><a href="/tag/Christmas">Christmas</a></em></em></em></em></em></em></em></em></em></em></em></em></em></li>
...
<li><em><em><em><em><em><em><a href="/tag/SEO">SEO</a></em></em></em></em></em></em></li>
<li><em><em><em><em><em><em><em><em><em><em><em><em><em><em><em><a href="/tag/Shopping">Shopping</a></em></em></em></em></em></em></em></em></em></em></em></em></em></em></em></li>
...
</ol>
Unfortunately it turns out not to be that decent, and stop calling me Shirley. It’s not exactly terrible code. It does recognise that a tag cloud is a list of links. And, since they’re in alphabetical order, that it’s an ordered list of links. That’s nice. However … fifteen nested <em> tags? FIFTEEN? That’s emphasis for you. Yes, it is parse-able, but it’s also something of a strange way of looking at emphasis. The HTML spec states that <em> is emphasis, and <strong> is for stronger emphasis. Nesting <em> tags seems counter to the idea that different tags are used for different levels of emphasis. Plus, if you had a screen reader that stressed the voice for emphasis, what would it do? Shout at you? Markup crime number three.
So what should it be?
As del.icio.us tells us, a tag cloud is a list of tags where the size that they are rendered at contains extra information. However, by hiding the extra context purely within the CSS or the HTML tags used, you are denying that context to some users. The basic assumption being made is that all users will be able to see the difference between font sizes, and this is demonstrably false.
A better way to code a tag cloud is to put the context of the cloud within the content, not the markup or CSS alone. As an example, I’m going to take some of my favourite flickr tags and put them into a cloud which communicates the relative frequency of each tag.
To start with a tag cloud in its most basic form is just a list of links. I am going to present them in alphabetical order, so I’ll use an ordered list. Into each list item I add the number of photos I have with that particular tag. The tag itself is linked to the page on flickr which contains those photos. So we end up with this first example. To display this as a traditional tag cloud, we need to alter it in a few ways:
The items need to be displayed next to each other, rather than one-per-line
The context information should be hidden from display (but not from screen readers)
The tag should link to the page of items with that tag
Displaying the items next to each other simply means setting the display of the list elements to inline. The context can be hidden by wrapping it in a <span> and then using the off-left method to hide it. And the link just means adding an anchor (with rel="tag" for some extra microformats bonus points). So, now we have a simple collection of links in our second example.
The last stage is to add the sizes. Since we already have context in our content, the size is purely for visual rendering, so we can just use classes to define the different sizes. For my example, I’ll use a range of class names from not-popular through ultra-popular, in order of smallest to largest, and then use CSS to define different font sizes. If you preferred, you could always use less verbose class names such as size1 through size6. Anyway, adding some classes and CSS gives us our final example, a semantic and more accessible tag cloud. |
2006 |
Mark Norman Francis |
marknormanfrancis |
2006-12-09T00:00:00+00:00 |
https://24ways.org/2006/marking-up-a-tag-cloud/ |
code |
| 145 |
The Neverending (Background Image) Story |
Everyone likes candy for Christmas, and there’s none better than eye candy. Well, that, and just more of the stuff. Today we’re going to combine both of those good points and look at how to create a beautiful background image that goes on and on… forever!
Of course, each background image is different, so instead of agonising over each and every pixel, I’m going to concentrate on five key steps that you can apply to any of your own repeating background images. In this example, we’ll look at the Miami Beach background image used on the new FOWA site, which I’m afraid is about as un-festive as you can get.
1. Choose your image wisely
I find there are three main criteria when judging photos you’re considering for repetition manipulation (or ‘repetulation’, as I like to say)…
simplicity (beware of complex patterns)
angle and perspective (watch out for shadows and obvious vanishing points)
consistent elements (for easy cloning)
You might want to check out this annotated version of the image, where I’ve highlighted elements of the photo that led me to choose it as the right one.
The original image purchased from iStockPhoto.
The Photoshopped version used on the FOWA site.
2. The power of horizontal lines
With the image chosen and your cursor poised for some Photoshop magic, the most useful thing you can do is drag out the edge pixels from one side of the image to create a kind of rough colour ‘template’ on which to work over. It doesn’t matter which side you choose, although you might find it beneficial to use the one with the simplest spread of colour and complex elements.
Click and hold on the marquee tool in the toolbar and select the ‘single column marquee tool’, which will span the full height of your document but will only be one pixel wide. Make the selection right at the edge of your document, press ctrl-c / cmd-c to copy the selection you made, create a new layer, and hit ctrl-v / cmd-v to paste the selection onto your new layer. using free transform (ctrl-t / cmd-t), drag out your selection so that it becomes as wide as your entire canvas.
A one-pixel-wide selection stretched out to the entire width of the canvas.
3. Cloning
It goes without saying that the trusty clone tool is one of the most important in the process of creating a seamlessly repeating background image, but I think it’s important to be fairly loose with it. Always clone on to a new layer so that you’ve got the freedom to move it around, but above all else, use the eraser tool to tweak your cloned areas: let that handle the precision stuff and you won’t have to worry about getting your clones right first time.
In the example below, you can see how I overcame the problem of the far-left tree shadow being chopped off by cloning the shadow from the tree on its right.
The edge of the shadow is cut off and needs to be ‘made’ from a pre-existing element.
The successful clone completes the missing shadow.
The two elements are obviously very similar but it doesn’t look like a clone because the majority of the shape is ‘genuine’ and only a small part is a duplicate. Also, after cloning I transformed the duplicate, erased parts of it, used gradients, and — ooh, did someone mention gradients?
4. Never underestimate a gradient
For this image, I used gradients in a similar way to a brush: covering large parts of the canvas with a colour that faded out to a desired point, before erasing certain parts for accuracy.
Several of the gradients and brushes that make up the ‘customised’ part of the image, visible when the main photograph layer is hidden.
The full composite.
Gradients are also a bit of an easy fix: you can use a gradient on one side of the image, flip it horizontally, and then use it again on the opposite side to make a more seamless join.
Speaking of which…
5. Sewing the seams
No matter what kind of magic Photoshop dust you sprinkle over your image, there will still always be the area where the two edges meet: that scary ‘loop’ point. Fret ye not, however, for there’s help at hand in the form of a nice little cheat. Even though the loop point might still be apparent, we can help hide it by doing something to throw viewers off the scent.
The seam is usually easy to spot because it’s a blank area with not much detail or colour variation, so in order to disguise it, go against the rule: put something across it!
This isn’t quite as challenging as it may sound, because if we intentionally make our own ‘object’ to span the join, we can accurately measure the exact halfway point where we need to split it across the two sides of the image. This is exactly what I did with the FOWA background image: I made some clouds!
A sky with no clouds in an unhappy one.
A simple soft white brush creates a cloud-like formation in the sky.
After taking the cloud’s opacity down to 20%, I used free transform to highlight the boundaries of the layer. I then moved it over to the right, so that the middle of the layer perfectly aligned with the right side of the canvas.
Finally, I duplicated the layer and did the same in reverse: dragging the layer over to the left and making sure that the middle of the duplicate layer perfectly aligned with the left side of the canvas.
And there you have it! Boom! Ta-da! Et Voila! To see the repeating background image in action, visit futureofwebapps.com on a large widescreen monitor or see a simulation of the effect.
Thanks for reading, folks. Have a great Christmas! |
2007 |
Elliot Jay Stocks |
elliotjaystocks |
2007-12-03T00:00:00+00:00 |
https://24ways.org/2007/the-neverending-background-image-story/ |
code |
| 147 |
Christmas Is In The AIR |
That’s right, Christmas is coming up fast and there’s plenty of things to do. Get the tree and lights up, get the turkey, buy presents and who know what else. And what about Santa? He’s got a list. I’m pretty sure he’s checking it twice.
Sure, we could use an existing list making web site or even a desktop widget. But we’re geeks! What’s the fun in that? Let’s build our own to-do list application and do it with Adobe AIR!
What’s Adobe AIR?
Adobe AIR, formerly codenamed Apollo, is a runtime environment that runs on both Windows and OSX (with Linux support to follow). This runtime environment lets you build desktop applications using Adobe technologies like Flash and Flex. Oh, and HTML. That’s right, you web standards lovin’ maniac. You can build desktop applications that can run cross-platform using the trio of technologies, HTML, CSS and JavaScript.
If you’ve tried developing with AIR before, you’ll need to get re-familiarized with the latest beta release as many things have changed since the last one (such as the API and restrictions within the sandbox.)
To get started
To get started in building an AIR application, you’ll need two basic things:
The AIR runtime. The runtime is needed to run any AIR-based application.
The SDK. The software development kit gives you all the pieces to test your application. Unzip the SDK into any folder you wish.
You’ll also want to get your hands on the JavaScript API documentation which you’ll no doubt find yourself getting into before too long. (You can download it, too.)
Also of interest, some development environments have support for AIR built right in. Aptana doesn’t have support for beta 3 yet but I suspect it’ll be available shortly.
Within the SDK, there are two main tools that we’ll use: one to test the application (ADL) and another to build a distributable package of our application (ADT). I’ll get into this some more when we get to that stage of development.
Building our To-do list application
The first step to building an application within AIR is to create an XML file that defines our default application settings. I call mine application.xml, mostly because Aptana does that by default when creating a new AIR project. It makes sense though and I’ve stuck with it. Included in the templates folder of the SDK is an example XML file that you can use.
The first key part to this after specifying things like the application ID, version, and filename, is to specify what the default content should be within the content tags. Enter in the name of the HTML file you wish to load. Within this HTML file will be our application.
<content>ui.html</content>
Create a new HTML document and name it ui.html and place it in the same directory as the application.xml file. The first thing you’ll want to do is copy over the AIRAliases.js file from the frameworks folder of the SDK and add a link to it within your HTML document.
<script type="text/javascript" src="AIRAliases.js"></script>
The aliases create shorthand links to all of the Flash-based APIs.
Now is probably a good time to explain how to debug your application.
Debugging our application
So, with our XML file created and HTML file started, let’s try testing our ‘application’. We’ll need the ADL application located in BIN folder of the SDK and tell it to run the application.xml file.
/path/to/adl /path/to/application.xml
You can also just drag the XML file onto ADL and it’ll accomplish the same thing. If you just did that and noticed that your blank application didn’t load, you’d be correct. It’s running but isn’t visible. Which at this point means you’ll have to shut down the ADL process. Sorry about that!
Changing the visibility
You have two ways to make your application visible. You can do it automatically by setting the placing true in the visible tag within the application.xml file.
<visible>true</visible>
The other way is to do it programmatically from within your application. You’d want to do it this way if you had other startup tasks to perform before showing the interface. To turn the UI on programmatically, simple set the visible property of nativeWindow to true.
<script type="text/javascript">
nativeWindow.visible = true;
</script>
Sandbox Security
Now that we have an application that we can see when we start it, it’s time to build the to-do list application. In doing so, you’d probably think that using a JavaScript library is a really good idea — and it can be but there are some limitations within AIR that have to be considered.
An HTML document, by default, runs within the application sandbox. You have full access to the AIR APIs but once the onload event of the window has fired, you’ll have a limited ability to make use of eval and other dynamic script injection approaches. This limits the ability of external sources from gaining access to everything the AIR API offers, such as database and local file system access. You’ll still be able to make use of eval for evaluating JSON responses, which is probably the most important if you wish to consume JSON-based services.
If you wish to create a greater wall of security between AIR and your HTML document loading in external resources, you can create a child sandbox. We won’t need to worry about it for our application so I won’t go any further into it but definitely keep this in mind.
Finally, our application
Getting tired of all this preamble? Let’s actually build our to-do list application. I’ll use jQuery because it’s small and should suit our needs nicely. Let’s begin with some structure:
<body>
<input type="text" id="text" value="">
<input type="button" id="add" value="Add">
<ul id="list"></ul>
</body>
Now we need to wire up that button to actually add a new item to our to-do list.
<script type="text/javascript">
$(document).ready(function(){
// make sure the application is visible
nativeWindow.visible = true;
$('#add').click(function(){
var t = $('#text').val();
if(t)
{
// use DOM methods to create the new list item
var li = document.createElement('li');
// the extra space at the end creates a buffer between the text
// and the delete link we're about to add
li.appendChild(document.createTextNode(t + ' '));
// create the delete link
var del = document.createElement('a');
// this makes it a true link. I feel dirty doing this.
del.setAttribute('href', '#');
del.addEventListener('click', function(evt){
this.parentNode.parentNode.removeChild(this.parentNode);
});
del.appendChild(document.createTextNode('[del]'));
li.appendChild(del);
// append everything to the list
$('#list').append(li);
//reset the text box
$('#text').val('');
}
})
});
</script>
And just like that, we’ve got a to-do list! That’s it! Just never close your application and you’ll remember everything. Okay, that’s not very practical. You need to have some way of storing your to-do items until the next time you open up the application.
Storing Data
You’ve essentially got 4 different ways that you can store data:
Using the local database. AIR comes with SQLLite built in. That means you can create tables and insert, update and select data from that database just like on a web server.
Using the file system. You can also create files on the local machine. You have access to a few folders on the local system such as the documents folder and the desktop.
Using EcryptedLocalStore. I like using the EcryptedLocalStore because it allows you to easily save key/value pairs and have that information encrypted. All this within just a couple lines of code.
Sending the data to a remote API. Our to-do list could sync up with Remember the Milk, for example.
To demonstrate some persistence, we’ll use the file system to store our files. In addition, we’ll let the user specify where the file should be saved. This way, we can create multiple to-do lists, keeping them separate and organized.
The application is now broken down into 4 basic tasks:
Load data from the file system.
Perform any interface bindings.
Manage creating and deleting items from the list.
Save any changes to the list back to the file system.
Loading in data from the file system
When the application starts up, we’ll prompt the user to select a file or specify a new to-do list. Within AIR, there are 3 main file objects: File, FileMode, and FileStream. File handles file and path names, FileMode is used as a parameter for the FileStream to specify whether the file should be read-only or for write access. The FileStream object handles all the read/write activity.
The File object has a number of shortcuts to default paths like the documents folder, the desktop, or even the application store. In this case, we’ll specify the documents folder as the default location and then use the browseForSave method to prompt the user to specify a new or existing file. If the user specifies an existing file, they’ll be asked whether they want to overwrite it.
var store = air.File.documentsDirectory;
var fileStream = new air.FileStream();
store.browseForSave("Choose To-do List");
Then we add an event listener for when the user has selected a file. When the file is selected, we check to see if the file exists and if it does, read in the contents, splitting the file on new lines and creating our list items within the interface.
store.addEventListener(air.Event.SELECT, fileSelected);
function fileSelected()
{
air.trace(store.nativePath);
// load in any stored data
var byteData = new air.ByteArray();
if(store.exists)
{
fileStream.open(store, air.FileMode.READ);
fileStream.readBytes(byteData, 0, store.size);
fileStream.close();
if(byteData.length > 0)
{
var s = byteData.readUTFBytes(byteData.length);
oldlist = s.split(“\r\n”);
// create todolist items
for(var i=0; i < oldlist.length; i++)
{
createItem(oldlist[i], (new Date()).getTime() + i );
}
}
}
}
Perform Interface Bindings
This is similar to before where we set the click event on the Add button but we’ve moved the code to save the list into a separate function.
$('#add').click(function(){
var t = $('#text').val();
if(t){
// create an ID using the time
createItem(t, (new Date()).getTime() );
}
})
Manage creating and deleting items from the list
The list management is now in its own function, similar to before but with some extra information to identify list items and with calls to save our list after each change.
function createItem(t, id)
{
if(t.length == 0) return;
// add it to the todo list
todolist[id] = t;
// use DOM methods to create the new list item
var li = document.createElement('li');
// the extra space at the end creates a buffer between the text
// and the delete link we're about to add
li.appendChild(document.createTextNode(t + ' '));
// create the delete link
var del = document.createElement('a');
// this makes it a true link. I feel dirty doing this.
del.setAttribute('href', '#');
del.addEventListener('click', function(evt){
var id = this.id.substr(1);
delete todolist[id]; // remove the item from the list
this.parentNode.parentNode.removeChild(this.parentNode);
saveList();
});
del.appendChild(document.createTextNode('[del]'));
del.id = 'd' + id;
li.appendChild(del);
// append everything to the list
$('#list').append(li);
//reset the text box
$('#text').val('');
saveList();
}
Save changes to the file system
Any time a change is made to the list, we update the file. The file will always reflect the current state of the list and we’ll never have to click a save button. It just iterates through the list, adding a new line to each one.
function saveList(){
if(store.isDirectory) return;
var packet = '';
for(var i in todolist)
{
packet += todolist[i] + '\r\n';
}
var bytes = new air.ByteArray();
bytes.writeUTFBytes(packet);
fileStream.open(store, air.FileMode.WRITE);
fileStream.writeBytes(bytes, 0, bytes.length);
fileStream.close();
}
One important thing to mention here is that we check if the store is a directory first. The reason we do this goes back to our browseForSave call. If the user cancels the dialog without selecting a file first, then the store points to the documentsDirectory that we set it to initially. Since we haven’t specified a file, there’s no place to save the list.
Hopefully by this point, you’ve been thinking of some cool ways to pimp out your list. Now we need to package this up so that we can let other people use it, too.
Creating a Package
Now that we’ve created our application, we need to package it up so that we can distribute it. This is a two step process. The first step is to create a code signing certificate (or you can pay for one from Thawte which will help authenticate you as an AIR application developer).
To create a self-signed certificate, run the following command. This will create a PFX file that you’ll use to sign your application.
adt -certificate -cn todo24ways 1024-RSA todo24ways.pfx mypassword
After you’ve done that, you’ll need to create the package with the certificate
adt -package -storetype pkcs12 -keystore todo24ways.pfx todo24ways.air application.xml .
The important part to mention here is the period at the end of the command. We’re telling it to package up all files in the current directory.
After that, just run the AIR file, which will install your application and run it.
Important things to remember about AIR
When developing an HTML application, the rendering engine is Webkit. You’ll thank your lucky stars that you aren’t struggling with cross-browser issues. (My personal favourites are multiple backgrounds and border radius!)
Be mindful of memory leaks. Things like Ajax calls and event binding can cause applications to slowly leak memory over time. Web pages are normally short lived but desktop applications are often open for hours, if not days, and you may find your little desktop application taking up more memory than anything else on your machine!
The WebKit runtime itself can also be a memory hog, usually taking about 15MB just for itself. If you create multiple HTML windows, it’ll add another 15MB to your memory footprint. Our little to-do list application shouldn’t be much of a concern, though.
The other important thing to remember is that you’re still essentially running within a Flash environment. While you probably won’t notice this working in small applications, the moment you need to move to multiple windows or need to accomplish stuff beyond what HTML and JavaScript can give you, the need to understand some of the Flash-based elements will become more important.
Lastly, the other thing to remember is that HTML links will load within the AIR application. If you want a link to open in the users web browser, you’ll need to capture that event and handle it on your own. The following code takes the HREF from a clicked link and opens it in the default web browser.
air.navigateToURL(new air.URLRequest(this.href));
Only the beginning
Of course, this is only the beginning of what you can do with Adobe AIR. You don’t have the same level of control as building a native desktop application, such as being able to launch other applications, but you do have more control than what you could have within a web application. Check out the Adobe AIR Developer Center for HTML and Ajax for tutorials and other resources.
Now, go forth and create your desktop applications and hopefully you finish all your shopping before Christmas!
Download the example files. |
2007 |
Jonathan Snook |
jonathansnook |
2007-12-19T00:00:00+00:00 |
https://24ways.org/2007/christmas-is-in-the-air/ |
code |
| 153 |
JavaScript Internationalisation |
or: Why Rudolph Is More Than Just a Shiny Nose
Dunder sat, glumly staring at the computer screen.
“What’s up, Dunder?” asked Rudolph, entering the stable and shaking off the snow from his antlers.
“Well,” Dunder replied, “I’ve just finished coding the new reindeer intranet Santa Claus asked me to do. You know how he likes to appear to be at the cutting edge, talking incessantly about Web 2.0, AJAX, rounded corners; he even spooked Comet recently by talking about him as if he were some pushy web server.
“I’ve managed to keep him happy, whilst also keeping it usable, accessible, and gleaming — and I’m still on the back row of the sleigh! But anyway, given the elves will be the ones using the site, and they come from all over the world, the site is in multiple languages. Which is great, except when it comes to the preview JavaScript I’ve written for the reindeer order form. Here, have a look…”
As he said that, he brought up the textileRef:8234272265470b85d91702:linkStartMarker:“order
form in French”:/examples/javascript-internationalisation/initial.fr.html on the screen. (Same in English).
“Looks good,” said Rudolph.
“But if I add some items,” said Dunder, “the preview appears in English, as it’s hard-coded in the JavaScript. I don’t want separate code for each language, as that’s just silly — I thought about just having if statements, but that doesn’t scale at all…”
“And there’s more, you aren’t displaying large numbers in French properly, either,” added Rudolph, who had been playing and looking at part of the source code:
function update_text() {
var hay = getValue('hay');
var carrots = getValue('carrots');
var bells = getValue('bells');
var total = 50 * bells + 30 * hay + 10 * carrots;
var out = 'You are ordering '
+ pretty_num(hay) + ' bushel' + pluralise(hay) + ' of hay, '
+ pretty_num(carrots) + ' carrot' + pluralise(carrots)
+ ', and ' + pretty_num(bells) + ' shiny bell' + pluralise(bells)
+ ', at a total cost of <strong>' + pretty_num(total)
+ '</strong> gold pieces. Thank you.';
document.getElementById('preview').innerHTML = out;
}
function pretty_num(n) {
n += '';
var o = '';
for (i=n.length; i>3; i-=3) {
o = ',' + n.slice(i-3, i) + o;
}
o = n.slice(0, i) + o;
return o;
}
function pluralise(n) {
if (n!=1) return 's';
return '';
}
“Oh, botheration!” cried Dunder. “This is just so complicated.”
“It doesn’t have to be,” said Rudolph, “you just have to think about things in a slightly different way from what you’re used to. As we’re only a simple example, we won’t be able to cover all possibilities, but for starters, we need some way of providing different information to the script dependent on the language. We’ll create a global i18n object, say, and fill it with the correct language information. The first variable we’ll need will be a thousands separator, and then we can change the pretty_num function to use that instead:
function pretty_num(n) {
n += '';
var o = '';
for (i=n.length; i>3; i-=3) {
o = i18n.thousands_sep + n.slice(i-3, i) + o;
}
o = n.slice(0, i) + o;
return o;
}
“The i18n object will also contain our translations, which we will access through a function called _() — that’s just an underscore. Other languages have a function of the same name doing the same thing. It’s very simple:
function _(s) {
if (typeof(i18n)!='undefined' && i18n[s]) {
return i18n[s];
}
return s;
}
“So if a translation is available and provided, we’ll use that; otherwise we’ll default to the string provided — which is helpful if the translation begins to lag behind the site’s text at all, as at least something will be output.”
“Got it,” said Dunder. “ _('Hello Dunder') will print the translation of that string, if one exists, ‘Hello Dunder’ if not.”
“Exactly. Moving on, your plural function breaks even in English if we have a word where the plural doesn’t add an s — like ‘children’.”
“You’re right,” said Dunder. “How did I miss that?”
“No harm done. Better to provide both singular and plural words to the function and let it decide which to use, performing any translation as well:
function pluralise(s, p, n) {
if (n != 1) return _(p);
return _(s);
}
“We’d have to provide different functions for different languages as we employed more elves and got more complicated — for example, in Polish, the word ‘file’ pluralises like this: 1 plik, 2-4 pliki, 5-21 plików, 22-24 pliki, 25-31 plików, and so on.” (More information on plural forms)
“Gosh!”
“Next, as different languages have different word orders, we must stop using concatenation to construct sentences, as it would be impossible for other languages to fit in; we have to keep coherent strings together. Let’s rewrite your update function, and then go through it:
function update_text() {
var hay = getValue('hay');
var carrots = getValue('carrots');
var bells = getValue('bells');
var total = 50 * bells + 30 * hay + 10 * carrots;
hay = sprintf(pluralise('%s bushel of hay', '%s bushels of hay', hay), pretty_num(hay));
carrots = sprintf(pluralise('%s carrot', '%s carrots', carrots), pretty_num(carrots));
bells = sprintf(pluralise('%s shiny bell', '%s shiny bells', bells), pretty_num(bells));
var list = sprintf(_('%s, %s, and %s'), hay, carrots, bells);
var out = sprintf(_('You are ordering %s, at a total cost of <strong>%s</strong> gold pieces.'),
list, pretty_num(total));
out += ' ';
out += _('Thank you.');
document.getElementById('preview').innerHTML = out;
}
“ sprintf is a function in many other languages that, given a format string and some variables, slots the variables into place within the string. JavaScript doesn’t have such a function, so we’ll write our own. Again, keep it simple for now, only integers and strings; I’m sure more complete ones can be found on the internet.
function sprintf(s) {
var bits = s.split('%');
var out = bits[0];
var re = /^([ds])(.*)$/;
for (var i=1; i<bits.length; i++) {
p = re.exec(bits[i]);
if (!p || arguments[i]==null) continue;
if (p[1] == 'd') {
out += parseInt(arguments[i], 10);
} else if (p[1] == 's') {
out += arguments[i];
}
out += p[2];
}
return out;
}
“Lastly, we need to create one file for each language, containing our i18n object, and then include that from the relevant HTML. Here’s what a blank translation file would look like for your order form:
var i18n = {
thousands_sep: ',',
"%s bushel of hay": '',
"%s bushels of hay": '',
"%s carrot": '',
"%s carrots": '',
"%s shiny bell": '',
"%s shiny bells": '',
"%s, %s, and %s": '',
"You are ordering %s, at a total cost of <strong>%s</strong> gold pieces.": '',
"Thank you.": ''
};
“If you implement this across the intranet, you’ll want to investigate the xgettext program, which can automatically extract all strings that need translating from all sorts of code files into a standard .po file (I think Python mode works best for JavaScript). You can then use a different program to take the translated .po file and automatically create the language-specific JavaScript files for us.” (e.g. German .po file for PledgeBank, mySociety’s .po-.js script, example output)
With a flourish, Rudolph finished editing. “And there we go, localised JavaScript in English, French, or German, all using the same main code.”
“Thanks so much, Rudolph!” said Dunder.
“I’m not just a pretty nose!” Rudolph quipped. “Oh, and one last thing — please comment liberally explaining the context of strings you use. Your translator will thank you, probably at the same time as they point out the four hundred places you’ve done something in code that only works in your language and no-one else’s…”
Thanks to Tim Morley and Edmund Grimley Evans for the French and German translations respectively. |
2007 |
Matthew Somerville |
matthewsomerville |
2007-12-08T00:00:00+00:00 |
https://24ways.org/2007/javascript-internationalisation/ |
code |
| 157 |
Capturing Caps Lock |
One of the more annoying aspects of having to remember passwords (along with having to remember loads of them) is that if you’ve got Caps Lock turned on accidentally when you type one in, it won’t work, and you won’t know why. Most desktop computers alert you in some way if you’re trying to enter your password to log on and you’ve enabled Caps Lock; there’s no reason why the web can’t do the same. What we want is a warning – maybe the user wants Caps Lock on, because maybe their password is in capitals – rather than something that interrupts what they’re doing. Something subtle.
But that doesn’t answer the question of how to do it. Sadly, there’s no way of actually detecting whether Caps Lock is on directly. However, there’s a simple work-around; if the user presses a key, and it’s a capital letter, and they don’t have the Shift key depressed, why then they must have Caps Lock on! Simple.
DOM scripting allows your code to be notified when a key is pressed in an element; when the key is pressed, you get the ASCII code for that key. Capital letters, A to Z, have ASCII codes 65 to 90. So, the code would look something like:
on a key press
if the ASCII code for the key is between 65 and 90 *and* if shift is pressed
warn the user that they have Caps Lock on, but let them carry on
end if
end keypress
The actual JavaScript for this is more complicated, because both event handling and keypress information differ across browsers. Your event handling functions are passed an event object, except in Internet Explorer where you use the global event object; the event object has a which parameter containing the ASCII code for the key pressed, except in Internet Explorer where the event object has a keyCode parameter; some browsers store whether the shift key is pressed in a shiftKey parameter and some in a modifiers parameter. All this boils down to code that looks something like this:
keypress: function(e) {
var ev = e ? e : window.event;
if (!ev) {
return;
}
var targ = ev.target ? ev.target : ev.srcElement;
// get key pressed
var which = -1;
if (ev.which) {
which = ev.which;
} else if (ev.keyCode) {
which = ev.keyCode;
}
// get shift status
var shift_status = false;
if (ev.shiftKey) {
shift_status = ev.shiftKey;
} else if (ev.modifiers) {
shift_status = !!(ev.modifiers & 4);
}
// At this point, you have the ASCII code in “which”,
// and shift_status is true if the shift key is pressed
}
Then it’s just a check to see if the ASCII code is between 65 and 90 and the shift key is pressed. (You also need to do the same work if the ASCII code is between 97 (a) and 122 (z) and the shift key is not pressed, because shifted letters are lower-case if Caps Lock is on.)
if (((which >= 65 && which <= 90) && !shift_status) ||
((which >= 97 && which <= 122) && shift_status)) {
// uppercase, no shift key
/* SHOW THE WARNING HERE */
} else {
/* HIDE THE WARNING HERE */
}
The warning can be implemented in many different ways: highlight the password field that the user is typing into, show a tooltip, display text next to the field. For simplicity, this code shows the warning as a previously created image, with appropriate alt text. Showing the warning means creating a new <img> tag with DOM scripting, dropping it into the page, and positioning it so that it’s next to the appropriate field. The image looks like this:
You know the position of the field the user is typing into (from its offsetTop and offsetLeft properties) and how wide it is (from its offsetWidth properties), so use createElement to make the new img element, and then absolutely position it with style properties so that it appears in the appropriate place (near to the text field).
The image is a transparent PNG with an alpha channel, so that the drop shadow appears nicely over whatever else is on the page. Because Internet Explorer version 6 and below doesn’t handle transparent PNGs correctly, you need to use the AlphaImageLoader technique to make the image appear correctly.
newimage = document.createElement('img');
newimage.src = "http://farm3.static.flickr.com/2145/2067574980_3ddd405905_o_d.png";
newimage.style.position = "absolute";
newimage.style.top = (targ.offsetTop - 73) + "px";
newimage.style.left = (targ.offsetLeft + targ.offsetWidth - 5) + "px";
newimage.style.zIndex = "999";
newimage.setAttribute("alt", "Warning: Caps Lock is on");
if (newimage.runtimeStyle) {
// PNG transparency for IE
newimage.runtimeStyle.filter += "progid:DXImageTransform.Microsoft.AlphaImageLoader(src='http://farm3.static.flickr.com/2145/2067574980_3ddd405905_o_d.png',sizingMethod='scale')";
}
document.body.appendChild(newimage);
Note that the alt text on the image is also correctly set. Next, all these parts need to be pulled together. On page load, identify all the password fields on the page, and attach a keypress handler to each. (This only needs to be done for password fields because the user can see if Caps Lock is on in ordinary text fields.)
var inps = document.getElementsByTagName("input");
for (var i=0, l=inps.length; i
The “create an image” code from above should only be run if the image is not already showing, so instead of creating a newimage object, create the image and attach it to the password field so that it can be checked for later (and not shown if it’s already showing). For safety, all the code should be wrapped up in its own object, so that its functions don’t collide with anyone else’s functions. So, create a single object called capslock and make all the functions be named methods of the object:
var capslock = {
...
keypress: function(e) {
}
...
}
Also, the “create an image” code is saved into its own named function, show_warning(), and the converse “remove the image” code into hide_warning(). This has the advantage that developers can include the JavaScript library that has been written here, but override what actually happens with their own code, using something like:
<script src="jscapslock.js" type="text/javascript"></script>
<script type="text/javascript">
capslock.show_warning(target) {
// do something different here to warn the user
}
capslock.hide_warning(target) {
// hide the warning that we created in show_warning() above
}
</script>
And that’s all. Simply include the JavaScript library in your pages, override what happens on a warning if that’s more appropriate for what you’re doing, and that’s all you need.
See the script in action. |
2007 |
Stuart Langridge |
stuartlangridge |
2007-12-04T00:00:00+00:00 |
https://24ways.org/2007/capturing-caps-lock/ |
code |
| 161 |
Keeping JavaScript Dependencies At Bay |
As we are writing more and more complex JavaScript applications we run into issues that have hitherto (god I love that word) not been an issue. The first decision we have to make is what to do when planning our app: one big massive JS file or a lot of smaller, specialised files separated by task.
Personally, I tend to favour the latter, mainly because it allows you to work on components in parallel with other developers without lots of clashes in your version control. It also means that your application will be more lightweight as you only include components on demand.
Starting with a global object
This is why it is a good plan to start your app with one single object that also becomes the namespace for the whole application, say for example myAwesomeApp:
var myAwesomeApp = {};
You can nest any necessary components into this one and also make sure that you check for dependencies like DOM support right up front.
Adding the components
The other thing to add to this main object is a components object, which defines all the components that are there and their file names.
var myAwesomeApp = {
components :{
formcheck:{
url:'formcheck.js',
loaded:false
},
dynamicnav:{
url:'dynamicnav.js',
loaded:false
},
gallery:{
url:'gallery.js',
loaded:false
},
lightbox:{
url:'lightbox.js',
loaded:false
}
}
};
Technically you can also omit the loaded properties, but it is cleaner this way. The next thing to add is an addComponent function that can load your components on demand by adding new SCRIPT elements to the head of the documents when they are needed.
var myAwesomeApp = {
components :{
formcheck:{
url:'formcheck.js',
loaded:false
},
dynamicnav:{
url:'dynamicnav.js',
loaded:false
},
gallery:{
url:'gallery.js',
loaded:false
},
lightbox:{
url:'lightbox.js',
loaded:false
}
},
addComponent:function(component){
var c = this.components[component];
if(c && c.loaded === false){
var s = document.createElement('script');
s.setAttribute('type', 'text/javascript');
s.setAttribute('src',c.url);
document.getElementsByTagName('head')[0].appendChild(s);
}
}
};
This allows you to add new components on the fly when they are not defined:
if(!myAwesomeApp.components.gallery.loaded){
myAwesomeApp.addComponent('gallery');
};
Verifying that components have been loaded
However, this is not safe as the file might not be available. To make the dynamic adding of components safer each of the components should have a callback at the end of them that notifies the main object that they indeed have been loaded:
var myAwesomeApp = {
components :{
formcheck:{
url:'formcheck.js',
loaded:false
},
dynamicnav:{
url:'dynamicnav.js',
loaded:false
},
gallery:{
url:'gallery.js',
loaded:false
},
lightbox:{
url:'lightbox.js',
loaded:false
}
},
addComponent:function(component){
var c = this.components[component];
if(c && c.loaded === false){
var s = document.createElement('script');
s.setAttribute('type', 'text/javascript');
s.setAttribute('src',c.url);
document.getElementsByTagName('head')[0].appendChild(s);
}
},
componentAvailable:function(component){
this.components[component].loaded = true;
}
}
For example the gallery.js file should call this notification as a last line:
myAwesomeApp.gallery = function(){
// [... other code ...]
}();
myAwesomeApp.componentAvailable('gallery');
Telling the implementers when components are available
The last thing to add (actually as a courtesy measure for debugging and implementers) is to offer a listener function that gets notified when the component has been loaded:
var myAwesomeApp = {
components :{
formcheck:{
url:'formcheck.js',
loaded:false
},
dynamicnav:{
url:'dynamicnav.js',
loaded:false
},
gallery:{
url:'gallery.js',
loaded:false
},
lightbox:{
url:'lightbox.js',
loaded:false
}
},
addComponent:function(component){
var c = this.components[component];
if(c && c.loaded === false){
var s = document.createElement('script');
s.setAttribute('type', 'text/javascript');
s.setAttribute('src',c.url);
document.getElementsByTagName('head')[0].appendChild(s);
}
},
componentAvailable:function(component){
this.components[component].loaded = true;
if(this.listener){
this.listener(component);
};
}
};
This allows you to write a main listener function that acts when certain components have been loaded, for example:
myAwesomeApp.listener = function(component){
if(component === 'gallery'){
showGallery();
}
};
Extending with other components
As the main object is public, other developers can extend the components object with own components and use the listener function to load dependent components. Say you have a bespoke component with data and labels in extra files:
myAwesomeApp.listener = function(component){
if(component === 'bespokecomponent'){
myAwesomeApp.addComponent('bespokelabels');
};
if(component === 'bespokelabels'){
myAwesomeApp.addComponent('bespokedata');
};
if(component === 'bespokedata'){
myAwesomeApp,bespokecomponent.init();
};
};
myAwesomeApp.components.bespokecomponent = {
url:'bespoke.js',
loaded:false
};
myAwesomeApp.components.bespokelabels = {
url:'bespokelabels.js',
loaded:false
};
myAwesomeApp.components.bespokedata = {
url:'bespokedata.js',
loaded:false
};
myAwesomeApp.addComponent('bespokecomponent');
Following this practice you can write pretty complex apps and still have full control over what is available when. You can also extend this to allow for CSS files to be added on demand.
Influences
If you like this idea and wondered if someone already uses it, take a look at the Yahoo! User Interface library, and especially at the YAHOO_config option of the global YAHOO.js object. |
2007 |
Christian Heilmann |
chrisheilmann |
2007-12-18T00:00:00+00:00 |
https://24ways.org/2007/keeping-javascript-dependencies-at-bay/ |
code |
| 162 |
Conditional Love |
“Browser.” The four-letter word of web design.
I mean, let’s face it: on the good days, when things just work in your target browsers, it’s marvelous. The air smells sweeter, birds’ songs sound more melodious, and both your design and your code are looking sharp.
But on the less-than-good days (which is, frankly, most of them), you’re compelled to tie up all your browsers in a sack, heave them into the nearest river, and start designing all-imagemap websites. We all play favorites, after all: some will swear by Firefox, Opera fans are allegedly legion, and others still will frown upon anything less than the latest WebKit nightly.
Thankfully, we do have an out for those little inconsistencies that crop up when dealing with cross-browser testing: CSS patches.
Spare the Rod, Hack the Browser
Before committing browsercide over some rendering bug, a designer will typically reach for a snippet of CSS fix the faulty browser. Historically referred to as “hacks,” I prefer Dan Cederholm’s more client-friendly alternative, “patches”.
But whatever you call them, CSS patches all work along the same principle: supply the proper property value to the good browsers, while giving higher maintenance other browsers an incorrect value that their frustrating idiosyncratic rendering engine can understand.
Traditionally, this has been done either by exploiting incomplete CSS support:
#content {
height: 1%; // Let's force hasLayout for old versions of IE.
line-height: 1.6;
padding: 1em;
}
html>body #content {
height: auto; // Modern browsers get a proper height value.
}
or by exploiting bugs in their rendering engine to deliver alternate style rules:
#content p {
font-size: .8em;
/* Hide from Mac IE5 \*/
font-size: .9em;
/* End hiding from Mac IE5 */
}
We’ve even used these exploits to serve up whole stylesheets altogether:
@import url("core.css");
@media tty {
i{content:"\";/*" "*/}} @import 'windows-ie5.css'; /*";}
}/* */
The list goes on, and on, and on. For every browser, for every bug, there’s a patch available to fix some rendering bug.
But after some time working with standards-based layouts, I’ve found that CSS patches, as we’ve traditionally used them, become increasingly difficult to maintain. As stylesheets are modified over the course of a site’s lifetime, inline fixes we’ve written may become obsolete, making them difficult to find, update, or prune out of our CSS. A good patch requires a constant gardener to ensure that it adds more than just bloat to a stylesheet, and inline patches can be very hard to weed out of a decently sized CSS file.
Giving the Kids Separate Rooms
Since I joined Airbag Industries earlier this year, every project we’ve worked on has this in the head of its templates:
<link rel="stylesheet" href="-/css/screen/main.css" type="text/css" media="screen, projection" />
<!--[if lt IE 7]>
<link rel="stylesheet" href="-/css/screen/patches/win-ie-old.css" type="text/css" media="screen, projection" />
<![endif]-->
<!--[if gte IE 7]>
<link rel="stylesheet" href="-/css/screen/patches/win-ie7-up.css" type="text/css" media="screen, projection" />
<![endif]-->
The first element is, simply enough, a link element that points to the project’s main CSS file. No patches, no hacks: just pure, modern browser-friendly style rules. Which, nine times out of ten, will net you a design that looks like spilled eggnog in various versions of Internet Explorer.
But don’t reach for the mulled wine quite yet. Immediately after, we’ve got a brace of conditional comments wrapped around two other link elements. These odd-looking comments allow us to selectively serve up additional stylesheets just to the version of IE that needs them. We’ve got one for IE 6 and below:
<!--[if lt IE 7]>
<link rel="stylesheet" href="-/css/screen/patches/win-ie-old.css" type="text/css" media="screen, projection" />
<![endif]-->
And another for IE7 and above:
<!--[if gte IE 7]>
<link rel="stylesheet" href="-/css/screen/patches/win-ie7-up.css" type="text/css" media="screen, projection" />
<![endif]-->
Microsoft’s conditional comments aren’t exactly new, but they can be a valuable alternative to cooking CSS patches directly into a master stylesheet. And though they’re not a W3C-approved markup structure, I think they’re just brilliant because they innovate within the spec: non-IE devices will assume that the comments are just that, and ignore the markup altogether.
This does, of course, mean that there’s a little extra markup in the head of our documents. But this approach can seriously cut down on the unnecessary patches served up to the browsers that don’t need them. Namely, we no longer have to write rules like this in our main stylesheet:
#content {
height: 1%; // Let's force hasLayout for old versions of IE.
line-height: 1.6;
padding: 1em;
}
html>body #content {
height: auto; // Modern browsers get a proper height value.
}
Rather, we can simply write an un-patched rule in our core stylesheet:
#content {
line-height: 1.6;
padding: 1em;
}
And now, our patch for older versions of IE goes in—you guessed it—the stylesheet for older versions of IE:
#content {
height: 1%;
}
The hasLayout patch is applied, our design’s repaired, and—most importantly—the patch is only seen by the browser that needs it. The “good” browsers don’t have to incur any added stylesheet weight from our IE patches, and Internet Explorer gets the conditional love it deserves.
Most importantly, this “compartmentalized” approach to CSS patching makes it much easier for me to patch and maintain the fixes applied to a particular browser. If I need to track down a bug for IE7, I don’t need to scroll through dozens or hundreds of rules in my core stylesheet: instead, I just open the considerably slimmer IE7-specific patch file, make my edits, and move right along.
Even Good Children Misbehave
While IE may occupy the bulk of our debugging time, there’s no denying that other popular, modern browsers will occasionally disagree on how certain bits of CSS should be rendered. But without something as, well, pimp as conditional comments at our disposal, how do we bring the so-called “good browsers” back in line with our design?
Assuming you’re loving the “one patch file per browser” model as much as I do, there’s just one alternative: JavaScript.
function isSaf() {
var isSaf = (document.childNodes && !document.all && !navigator.taintEnabled && !navigator.accentColorName) ? true : false;
return isSaf;
}
function isOp() {
var isOp = (window.opera) ? true : false;
return isOp;
}
Instead of relying on dotcom-era tactics of parsing the browser’s user-agent string, we’re testing here for support for various DOM objects, whose presence or absence we can use to reasonably infer the browser we’re looking at. So running the isOp() function, for example, will test for Opera’s proprietary window.opera object, and thereby accurately tell you if your user’s running Norway’s finest browser.
With scripts such as isOp() and isSaf() in place, you can then reasonably test which browser’s viewing your content, and insert additional link elements as needed.
function loadPatches(dir) {
if (document.getElementsByTagName() && document.createElement()) {
var head = document.getElementsByTagName("head")[0];
if (head) {
var css = new Array();
if (isSaf()) {
css.push("saf.css");
} else if (isOp()) {
css.push("opera.css");
}
if (css.length) {
var link = document.createElement("link");
link.setAttribute("rel", "stylesheet");
link.setAttribute("type", "text/css");
link.setAttribute("media", "screen, projection");
for (var i = 0; i < css.length; i++) {
var tag = link.cloneNode(true);
tag.setAttribute("href", dir + css[0]);
head.appendChild(tag);
}
}
}
}
}
Here, we’re testing the results of isSaf() and isOp(), one after the other. For each function that returns true, then the name of a new stylesheet is added to the oh-so-cleverly named css array. Then, for each entry in css, we create a new link element, point it at our patch file, and insert it into the head of our template.
Fire it up using your favorite onload or DOMContentLoaded function, and you’re good to go.
Scripteat Emptor
At this point, some of the audience’s more conscientious ‘scripters may be preparing to lob figgy pudding at this author’s head. And that’s perfectly understandable; relying on JavaScript to patch CSS chafes a bit against the normally clean separation we have between our pages’ content, presentation, and behavior layers.
And beyond the philosophical concerns, this approach comes with a few technical caveats attached:
Browser detection? So un-133t.
Browser detection is not something I’d typically recommend. Whenever possible, a proper DOM script should check for the support of a given object or method, rather than the device with which your users view your content.
It’s JavaScript, so don’t count on it being available.
According to one site, roughly four percent of Internet users don’t have JavaScript enabled. Your site’s stats might be higher or lower than this number, but still: don’t expect that every member of your audience will see these additional stylesheets, and ensure that your content’s still accessible with JS turned off.
Be a constant gardener.
The sample isSaf() and isOp() functions I’ve written will tell you if the user’s browser is Safari or Opera. As a result, stylesheets written to patch issues in an old browser may break when later releases repair the relevant CSS bugs.
You can, of course, add logic to these simple little scripts to serve up version-specific stylesheets, but that way madness may lie. In any event, test your work vigorously, and keep testing it when new versions of the targeted browsers come out. Make sure that a patch written today doesn’t become a bug tomorrow.
Patching Firefox, Opera, and Safari isn’t something I’ve had to do frequently: still, there have been occasions where the above script’s come in handy. Between conditional comments, careful CSS auditing, and some judicious JavaScript, browser-based bugs can be handled with near-surgical precision.
So pass the ‘nog. It’s patchin’ time. |
2007 |
Ethan Marcotte |
ethanmarcotte |
2007-12-15T00:00:00+00:00 |
https://24ways.org/2007/conditional-love/ |
code |
| 163 |
Get To Grips with Slippy Maps |
Online mapping has definitely hit mainstream. Google Maps made ‘slippy maps’ popular and made it easy for any developer to quickly add a dynamic map to his or her website. You can now find maps for store locations, friends nearby, upcoming events, and embedded in blogs.
In this tutorial we’ll show you how to easily add a map to your site using the Mapstraction mapping library. There are many map providers available to choose from, each with slightly different functionality, design, and terms of service. Mapstraction makes deciding which provider to use easy by allowing you to write your mapping code once, and then easily switch providers.
Assemble the pieces
Utilizing any of the mapping library typically consists of similar overall steps:
Create an HTML div to hold the map
Include the Javascript libraries
Create the Javascript Map element
Set the initial map center and zoom level
Add markers, lines, overlays and more
Create the Map Div
The HTML div is where the map will actually show up on your page. It needs to have a unique id, because we’ll refer to that later to actually put the map here. This also lets you have multiple maps on a page, by creating individual divs and Javascript map elements. The size of the div also sets the height and width of the map. You set the size using CSS, either inline with the element, or via a CSS reference to the element id or class. For this example, we’ll use inline styling.
<div id="map" style="width: 400px; height: 400px;"></div>
Include Javascript libraries
A mapping library is like any Javascript library. You need to include the library in your page before you use the methods of that library. For our tutorial, we’ll need to include at least two libraries: Mapstraction, and the mapping API(s) we want to display. Our first example we’ll use the ubiquitous Google Maps library. However, you can just as easily include Yahoo, MapQuest, or any of the other supported libraries.
Another important aspect of the mapping libraries is that many of them require an API key. You will need to agree to the terms of service, and get an API key these.
<script src="http://maps.google.com/maps?file=api&v=2&key=YOUR_KEY" type="text/javascript"></script>
<script type="text/javascript" src="http://mapstraction.com/src/mapstraction.js"></script>
Create the Map
Great, we’ve now put in all the pieces we need to start actually creating our map. This is as simple as creating a new Mapstraction object with the id of the HTML div we created earlier, and the name of the mapping provider we want to use for this map.
With several of the mapping libraries you will need to set the map center and zoom level before the map will appear. The map centering actually triggers the initialization of the map.
var mapstraction = new Mapstraction('map','google');
var myPoint = new LatLonPoint(37.404,-122.008);
mapstraction.setCenterAndZoom(myPoint, 10);
A note about zoom levels. The setCenterAndZoom function takes two parameters, the center as a LatLonPoint, and a zoom level that has been defined by mapping libraries. The current usage is for zoom level 1 to be “zoomed out”, or view the entire earth – and increasing the zoom level as you zoom in. Typically 17 is the maximum zoom, which is about the size of a house.
Different mapping providers have different quality of zoomed in maps over different parts of the world. This is a perfect reason why using a library like Mapstraction is very useful, because you can quickly change mapping providers to accommodate users in areas that have bad coverage with some maps.
To switch providers, you just need to include the Javascript library, and then change the second parameter in the Mapstraction creation. Or, you can call the switch method to dynamically switch the provider.
So for Yahoo Maps (demo):
var mapstraction = new Mapstraction('map','yahoo');
or Microsoft Maps (demo):
var mapstraction = new Mapstraction('map','microsoft');
want a 3D globe in your browser? try FreeEarth (demo):
var mapstraction = new Mapstraction('map','freeearth');
or even OpenStreetMap (free your data!) (demo):
var mapstraction = new Mapstraction('map','openstreetmap');
Visit the Mapstraction multiple map demo page for an example of how easy it is to have many maps on your page, each with a different provider.
Adding Markers
While adding your first map is fun, and you can probably spend hours just sliding around, the point of adding a map to your site is usually to show the location of something. So now you want to add some markers. There are a couple of ways to add to your map.
The simplest is directly creating markers. You could either hard code this into a rather static page, or dynamically generate these using whatever tools your site is built on.
var marker = new Marker( new LatLonPoint(37.404,-122.008) );
marker.setInfoBubble("It's easy to add maps to your site");
mapstraction.addMarker( marker );
There is a lot more you can do with markers, including changing the icon, adding timestamps, automatically opening the bubble, or making them draggable.
While it is straight-forward to create markers one by one, there is a much easier way to create a large set of markers. And chances are, you can make it very easy by extending some data you already are sharing: RSS.
Specifically, using GeoRSS you can easily add a large set of markers directly to a map. GeoRSS is a community built standard (like Microformats) that added geographic markup to RSS and Atom entries. It’s as simple as adding <georss:point>42 -83</georss:point> to your feeds to share items via GeoRSS. Once you’ve done that, you can add that feed as an ‘overlay’ to your map using the function:
mapstraction.addOverlay("http://api.flickr.com/services/feeds/groups_pool.gne?id=322338@N20&format=rss_200&georss=1");
Mapstraction also supports KML for many of the mapping providers. So it’s easy to add various data sources together with your own data. Check out Mapufacture for a growing index of available GeoRSS feeds and KML documents.
Play with your new toys
Mapstraction offers a lot more functionality you can utilize for demonstrating a lot of geographic data on your website. It also includes geocoding and routing abstraction layers for making sure your users know where to go. You can see more on the Mapstraction website: http://mapstraction.com. |
2007 |
Andrew Turner |
andrewturner |
2007-12-02T00:00:00+00:00 |
https://24ways.org/2007/get-to-grips-with-slippy-maps/ |
code |
| 164 |
My Other Christmas Present Is a Definition List |
A note from the editors: readers should note that the HTML5 redefinition of definition lists has come to pass and is now à la mode.
Last year, I looked at how the markup for tag clouds was generally terrible. I thought this year I would look not at a method of marking up a common module, but instead just at a simple part of HTML and how it generally gets abused.
No, not tables. Definition lists. Ah, definition lists. Often used but rarely understood.
Examining the definition of definitions
To start with, let’s see what the HTML spec has to say about them.
Definition lists vary only slightly from other types of lists in that list items consist of two parts: a term and a description.
The canonical example of a definition list is a dictionary. Words can have multiple descriptions (even the word definition has at least five). Also, many terms can share a single definition (for example, the word colour can also be spelt color, but they have the same definition).
Excellent, we can all grasp that. But it very quickly starts to fall apart. Even in the HTML specification the definition list is mis-used.
Another application of DL, for example, is for marking up dialogues, with each DT naming a speaker, and each DD containing his or her words.
Wrong. Completely and utterly wrong. This is the biggest flaw in the HTML spec, along with dropping support for the start attribute on ordered lists. “Why?”, you may ask. Let me give you an example from Romeo and Juliet, act 2, scene 2.
<dt>Juliet</dt>
<dd>Romeo!</dd>
<dt>Romeo</dt>
<dd>My niesse?</dd>
<dt>Juliet</dt>
<dd>At what o'clock tomorrow shall I send to thee?</dd>
<dt>Romeo</dt>
<dd>At the hour of nine.</dd>
Now, the problem here is that a given definition can have multiple descriptions (the DD). Really the dialog “descriptions” should be rolled up under the terms, like so:
<dt>Juliet</dt>
<dd>Romeo!</dd>
<dd>At what o'clock tomorrow shall I send to thee?</dd>
<dt>Romeo</dt>
<dd>My niesse?</dd>
<dd>At the hour of nine.</dd>
Suddenly the play won’t make anywhere near as much sense. (If it’s anything, the correct markup for a play is an ordered list of CITE and BLOCKQUOTE elements.)
This is the first part of the problem. That simple example has turned definition lists in everyone’s mind from pure definitions to more along the lines of a list with pre-configured heading(s) and text(s).
Screen reader, enter stage left.
In many screen readers, a simple definition list would be read out as “definition term equals definition description”. So in our play excerpt, Juliet equals Romeo! That’s not right, either. But this also leads a lot of people astray with definition lists to believing that they are useful for key/value pairs.
Behaviour and convention
The WHAT-WG have noticed the common mis-use of the DL, and have codified it into the new spec. In the HTML5 draft, a definition list is no longer a definition list.
The dl element introduces an unordered association list consisting of zero or more name-value groups (a description list). Each group must consist of one or more names (dt elements) followed by one or more values (dd elements).
They also note that the “dl element is inappropriate for marking up dialogue, since dialogue is ordered”. So for that example they have created a DIALOG (sic) element.
Strange, then, that they keep DL as-is but instead refer to it an “association list”. They have not created a new AL element, and kept DL for the original purpose. They have chosen not to correct the usage or to create a new opportunity for increased specificity in our HTML, but to “pave the cowpath” of convention.
How to use a definition list
Given that everyone else is using a DL incorrectly, should we? Well, if they all jumped off a bridge, would you too? No, of course you wouldn’t. We don’t have HTML5 yet, so we’re stuck with the existing semantics of HTML4 and XHTML1. Which means that:
Listing dialogue is not defining anything.
Listing the attributes of a piece of hardware (resolution = 1600×1200) is illustrating sample values, not defining anything (however, stating what ‘resolution’ actually means in this context would be a definition).
Listing the cast and crew of a given movie is not defining the people involved in making movies. (Stuart Gordon may have been the director of Space Truckers, but that by no means makes him the true definition of a director.)
A menu of navigation items is simply a nested ordered or unordered list of links, not a definition list.
Applying styling handles to form labels and elements is not a good use for a definition list.
And so on.
Living by the specification, a definition list should be used for term definitions – glossaries, lexicons and dictionaries – only.
Anything else is a crime against markup. |
2007 |
Mark Norman Francis |
marknormanfrancis |
2007-12-05T00:00:00+00:00 |
https://24ways.org/2007/my-other-christmas-present-is-a-definition-list/ |
code |
| 165 |
Transparent PNGs in Internet Explorer 6 |
Newer breeds of browser such as Firefox and Safari have offered support for PNG images with full alpha channel transparency for a few years. With the use of hacks, support has been available in Internet Explorer 5.5 and 6, but the hacks are non-ideal and have been tricky to use. With IE7 winning masses of users from earlier versions over the last year, full PNG alpha-channel transparency is becoming more of a reality for day-to-day use.
However, there are still numbers of IE6 users out there who we can’t leave out in the cold this Christmas, so in this article I’m going to look what we can do to support IE6 users whilst taking full advantage of transparency for the majority of a site’s visitors.
So what’s alpha channel transparency?
Cast your minds back to the Ghost of Christmas Past, the humble GIF. Images in GIF format offer transparency, but that transparency is either on or off for any given pixel. Each pixel’s either fully transparent, or a solid colour. In GIF, transparency is effectively just a special colour you can chose for a pixel.
The PNG format tackles the problem rather differently. As well as having any colour you chose, each pixel also carries a separate channel of information detailing how transparent it is. This alpha channel enables a pixel to be fully transparent, fully opaque, or critically, any step in between.
This enables designers to produce images that can have, for example, soft edges without any of the ‘halo effect’ traditionally associated with GIF transparency. If you’ve ever worked on a site that has different colour schemes and therefore requires multiple versions of each graphic against a different colour, you’ll immediately see the benefit.
What’s perhaps more interesting than that, however, is the extra creative freedom this gives designers in creating beautiful sites that can remain web-like in their ability to adjust, scale and reflow.
The Internet Explorer problem
Up until IE7, there has been no fully native support for PNG alpha channel transparency in Internet Explorer. However, since IE5.5 there has been some support in the form of proprietary filter called the AlphaImageLoader. Internet Explorer filters can be applied directly in your CSS (for both inline and background images), or by setting the same CSS property with JavaScript.
CSS:
img {
filter: progid:DXImageTransform.Microsoft.AlphaImageLoader(...);
}
JavaScript:
img.style.filter = "progid:DXImageTransform.Microsoft.AlphaImageLoader(...)";
That may sound like a problem solved, but all is not as it may appear. Firstly, as you may realise, there’s no CSS property called filter in the W3C CSS spec. It’s a proprietary extension added by Microsoft that could potentially cause other browsers to reject your entire CSS rule.
Secondly, AlphaImageLoader does not magically add full PNG transparency support so that a PNG in the page will just start working. Instead, when applied to an element in the page, it draws a new rendering surface in the same space that element occupies and loads a PNG into it. If that sounds weird, it’s because that’s precisely what it is. However, by and large the result is that PNGs with an alpha channel can be accommodated.
The pitfalls
So, whilst support for PNG transparency in IE5.5 and 6 is possible, it’s not without its problems.
Background images cannot be positioned or repeated
The AlphaImageLoader does work for background images, but only for the simplest of cases. If your design requires the image to be tiled (background-repeat) or positioned (background-position) you’re out of luck. The AlphaImageLoader allows you to set a sizingMethod to either crop the image (if necessary) or to scale it to fit. Not massively useful, but something at least.
Delayed loading and resource use
The AlphaImageLoader can be quite slow to load, and appears to consume more resources than a standard image when applied. Typically, you’d need to add thousands of GIFs or JPEGs to a page before you saw any noticeable impact on the browser, but with the AlphaImageLoader filter applied Internet Explorer can become sluggish after just a handful of alpha channel PNGs.
The other noticeable effect is that as more instances of the AlphaImageLoader are applied, the longer it takes to render the PNGs with their transparency. The user sees the PNG load in its original non-supported state (with black or grey areas where transparency should be) before one by one the filter kicks in and makes them properly transparent.
Both the issue of sluggish behaviour and delayed load only really manifest themselves with volume and size of image. Use just a couple of instances and it’s fine, but be careful adding more than five or six. As ever, test, test, test.
Links become unclickable, forms unfocusable
This is a big one. There’s a bug/weirdness with AlphaImageLoader that sometimes prevents interaction with links and forms when a PNG background image is used. This is sometimes reported as a z-index issue, but I don’t believe it is. Rather, it’s an artefact of that weird way the filter gets applied to the document almost outside of the normal render process.
Often this can be solved by giving the links or form elements hasLayout using position: relative; where possible. However, this doesn’t always work and the non-interaction problem cannot always be solved. You may find yourself having to go back to the drawing board.
Sidestepping the danger zones
Frankly, it’s pretty bad news if you design a site, have that design signed off by your client, build it and then find out only at the end (because you don’t know what might trigger a problem) that your search field can’t be focused in IE6. That’s an absolute nightmare, and whilst it’s not likely to happen, it’s possible that it might. It’s happened to me. So what can you do?
The best approach I’ve found to this scenario is
Isolate the PNG or PNGs that are causing the problem. Step through the PNGs in your page, commenting them out one by one and retesting. Typically it’ll be the nearest PNG to the problem, so try there first. Keep going until you can click your links or focus your form fields.
This is where you really need luck on your side, because you’re going to have to fake it. This will depend on the design of the site, but some way or other create a replacement GIF or JPEG image that will give you an acceptable result. Then use conditional comments to serve that image to only users of IE older than version 7.
A hack, you say? Well, you started it chum.
Applying AlphaImageLoader
Because the filter property is invalid CSS, the safest pragmatic approach is to apply it selectively with JavaScript for only Internet Explorer versions 5.5 and 6. This helps ensure that by default you’re serving standard CSS to browsers that support both the CSS and PNG standards correct, and then selectively patching up only the browsers that need it.
Several years ago, Aaron Boodman wrote and released a script called sleight for doing just that. However, sleight dealt only with images in the page, and not background images applied with CSS. Building on top of Aaron’s work, I hacked sleight and came up with bgsleight for applying the filter to background images instead. That was in 2003, and over the years I’ve made a couple of improvements here and there to keep it ticking over and to resolve conflicts between sleight and bgsleight when used together. However, with alpha channel PNGs becoming much more widespread, it’s time for a new version.
Introducing SuperSleight
SuperSleight adds a number of new and useful features that have come from the day-to-day needs of working with PNGs.
Works with both inline and background images, replacing the need for both sleight and bgsleight
Will automatically apply position: relative to links and form fields if they don’t already have position set. (Can be disabled.)
Can be run on the entire document, or just a selected part where you know the PNGs are. This is better for performance.
Detects background images set to no-repeat and sets the scaleMode to crop rather than scale.
Can be re-applied by any other JavaScript in the page – useful if new content has been loaded by an Ajax request.
Download SuperSleight
Implementation
Getting SuperSleight running on a page is quite straightforward, you just need to link the supplied JavaScript file (or the minified version if you prefer) into your document inside conditional comments so that it is delivered to only Internet Explorer 6 or older.
<!--[if lte IE 6]>
<script type="text/javascript" src="supersleight-min.js"></script>
<![endif]-->
Supplied with the JavaScript is a simple transparent GIF file. The script replaces the existing PNG with this before re-layering the PNG over the top using AlphaImageLoaded. You can change the name or path of the image in the top of the JavaScript file, where you’ll also find the option to turn off the adding of position: relative to links and fields if you don’t want that.
The script is kicked off with a call to supersleight.init() at the bottom. The scope of the script can be limited to just one part of the page by passing an ID of an element to supersleight.limitTo(). And that’s all there is to it.
Update March 2008: a version of this script as a jQuery plugin is also now available. |
2007 |
Drew McLellan |
drewmclellan |
2007-12-01T00:00:00+00:00 |
https://24ways.org/2007/supersleight-transparent-png-in-ie6/ |
code |
| 168 |
Unobtrusively Mapping Microformats with jQuery |
Microformats are everywhere. You can’t shake an electronic stick these days without accidentally poking a microformat-enabled site, and many developers use microformats as a matter of course. And why not? After all, why invent your own class names when you can re-use pre-defined ones that give your site extra functionality for free?
Nevertheless, while it’s good to know that users of tools such as Tails and Operator will derive added value from your shiny semantics, it’s nice to be able to reuse that effort in your own code.
We’re going to build a map of some of my favourite restaurants in Brighton. Fitting with the principles of unobtrusive JavaScript, we’ll start with a semantically marked up list of restaurants, then use JavaScript to add the map, look up the restaurant locations and plot them as markers.
We’ll be using a couple of powerful tools. The first is jQuery, a JavaScript library that is ideally suited for unobtrusive scripting. jQuery allows us to manipulate elements on the page based on their CSS selector, which makes it easy to extract information from microformats.
The second is Mapstraction, introduced here by Andrew Turner a few days ago. We’ll be using Google Maps in the background, but Mapstraction makes it easy to change to a different provider if we want to later.
Getting Started
We’ll start off with a simple collection of microformatted restaurant details, representing my seven favourite restaurants in Brighton. The full, unstyled list can be seen in restaurants-plain.html. Each restaurant listing looks like this:
<li class="vcard">
<h3><a class="fn org url" href="http://www.riddleandfinns.co.uk/">Riddle & Finns</a></h3>
<div class="adr">
<p class="street-address">12b Meeting House Lane</p>
<p><span class="locality">Brighton</span>, <abbr class="country-name" title="United Kingdom">UK</abbr></p>
<p class="postal-code">BN1 1HB</p>
</div>
<p>Telephone: <span class="tel">+44 (0)1273 323 008</span></p>
<p>E-mail: <a href="mailto:info@riddleandfinns.co.uk" class="email">info@riddleandfinns.co.uk</a></p>
</li>
Since we’re dealing with a list of restaurants, each hCard is marked up inside a list item. Each restaurant is an organisation; we signify this by placing the classes fn and org on the element surrounding the restaurant’s name (according to the hCard spec, setting both fn and org to the same value signifies that the hCard represents an organisation rather than a person).
The address information itself is contained within a div of class adr. Note that the HTML <address> element is not suitable here for two reasons: firstly, it is intended to mark up contact details for the current document rather than generic addresses; secondly, address is an inline element and as such cannot contain the paragraphs elements used here for the address information.
A nice thing about microformats is that they provide us with automatic hooks for our styling. For the moment we’ll just tidy up the whitespace a bit; for more advanced style tips consult John Allsop’s guide from 24 ways 2006.
.vcard p {
margin: 0;
}
.adr {
margin-bottom: 0.5em;
}
To plot the restaurants on a map we’ll need latitude and longitude for each one. We can find this out from their address using geocoding. Most mapping APIs include support for geocoding, which means we can pass the API an address and get back a latitude/longitude point. Mapstraction provides an abstraction layer around these APIs which can be included using the following script tag:
<script type="text/javascript" src="http://mapstraction.com/src/mapstraction-geocode.js"></script>
While we’re at it, let’s pull in the other external scripts we’ll be using:
<script type="text/javascript" src="jquery-1.2.1.js"></script>
<script src="http://maps.google.com/maps?file=api&v=2&key=YOUR_KEY" type="text/javascript"></script>
<script type="text/javascript" src="http://mapstraction.com/src/mapstraction.js"></script>
<script type="text/javascript" src="http://mapstraction.com/src/mapstraction-geocode.js"></script>
That’s everything set up: let’s write some JavaScript!
In jQuery, almost every operation starts with a call to the jQuery function. The function simulates method overloading to behave in different ways depending on the arguments passed to it. When writing unobtrusive JavaScript it’s important to set up code to execute when the page has loaded to the point that the DOM is available to be manipulated. To do this with jQuery, pass a callback function to the jQuery function itself:
jQuery(function() {
// This code will be executed when the DOM is ready
});
Initialising the map
The first thing we need to do is initialise our map. Mapstraction needs a div with an explicit width, height and ID to show it where to put the map. Our document doesn’t currently include this markup, but we can insert it with a single line of jQuery code:
jQuery(function() {
// First create a div to host the map
var themap = jQuery('<div id="themap"></div>').css({
'width': '90%',
'height': '400px'
}).insertBefore('ul.restaurants');
});
While this is technically just a single line of JavaScript (with line-breaks added for readability) it’s actually doing quite a lot of work. Let’s break it down in to steps:
var themap = jQuery('<div id="themap"></div>')
Here’s jQuery’s method overloading in action: if you pass it a string that starts with a < it assumes that you wish to create a new HTML element. This provides us with a handy shortcut for the more verbose DOM equivalent:
var themap = document.createElement('div');
themap.id = 'themap';
Next we want to apply some CSS rules to the element. jQuery supports chaining, which means we can continue to call methods on the object returned by jQuery or any of its methods:
var themap = jQuery('<div id="themap"></div>').css({
'width': '90%',
'height': '400px'
})
Finally, we need to insert our new HTML element in to the page. jQuery provides a number of methods for element insertion, but in this case we want to position it directly before the <ul> we are using to contain our restaurants. jQuery’s insertBefore() method takes a CSS selector indicating an element already on the page and places the current jQuery selection directly before that element in the DOM.
var themap = jQuery('<div id="themap"></div>').css({
'width': '90%',
'height': '400px'
}).insertBefore('ul.restaurants');
Finally, we need to initialise the map itself using Mapstraction. The Mapstraction constructor takes two arguments: the first is the ID of the element used to position the map; the second is the mapping provider to use (in this case google ):
// Initialise the map
var mapstraction = new Mapstraction('themap','google');
We want the map to appear centred on Brighton, so we’ll need to know the correct co-ordinates. We can use www.getlatlon.com to find both the co-ordinates and the initial map zoom level.
// Show map centred on Brighton
mapstraction.setCenterAndZoom(
new LatLonPoint(50.82423734980143, -0.14007568359375),
15 // Zoom level appropriate for Brighton city centre
);
We also want controls on the map to allow the user to zoom in and out and toggle between map and satellite view.
mapstraction.addControls({
zoom: 'large',
map_type: true
});
Adding the markers
It’s finally time to parse some microformats. Since we’re using hCard, the information we want is wrapped in elements with the class vcard. We can use jQuery’s CSS selector support to find them:
var vcards = jQuery('.vcard');
Now that we’ve found them, we need to create a marker for each one in turn. Rather than using a regular JavaScript for loop, we can instead use jQuery’s each() method to execute a function against each of the hCards.
jQuery('.vcard').each(function() {
// Do something with the hCard
});
Within the callback function, this is set to the current DOM element (in our case, the list item). If we want to call the magic jQuery methods on it we’ll need to wrap it in another call to jQuery:
jQuery('.vcard').each(function() {
var hcard = jQuery(this);
});
The Google maps geocoder seems to work best if you pass it the street address and a postcode. We can extract these using CSS selectors: this time, we’ll use jQuery’s find() method which searches within the current jQuery selection:
var streetaddress = hcard.find('.street-address').text();
var postcode = hcard.find('.postal-code').text();
The text() method extracts the text contents of the selected node, minus any HTML markup.
We’ve got the address; now we need to geocode it. Mapstraction’s geocoding API requires us to first construct a MapstractionGeocoder, then use the geocode() method to pass it an address. Here’s the code outline:
var geocoder = new MapstractionGeocoder(onComplete, 'google');
geocoder.geocode({'address': 'the address goes here');
The onComplete function is executed when the geocoding operation has been completed, and will be passed an object with the resulting point on the map. We just want to create a marker for the point:
var geocoder = new MapstractionGeocoder(function(result) {
var marker = new Marker(result.point);
mapstraction.addMarker(marker);
}, 'google');
For our purposes, joining the street address and postcode with a comma to create the address should suffice:
geocoder.geocode({'address': streetaddress + ', ' + postcode});
There’s one last step: when the marker is clicked, we want to display details of the restaurant. We can do this with an info bubble, which can be configured by passing in a string of HTML. We’ll construct that HTML using jQuery’s html() method on our hcard object, which extracts the HTML contained within that DOM node as a string.
var marker = new Marker(result.point);
marker.setInfoBubble(
'<div class="bubble">' + hcard.html() + '</div>'
);
mapstraction.addMarker(marker);
We’ve wrapped the bubble in a div with class bubble to make it easier to style. Google Maps can behave strangely if you don’t provide an explicit width for your info bubbles, so we’ll add that to our CSS now:
.bubble {
width: 300px;
}
That’s everything we need: let’s combine our code together:
jQuery(function() {
// First create a div to host the map
var themap = jQuery('<div id="themap"></div>').css({
'width': '90%',
'height': '400px'
}).insertBefore('ul.restaurants');
// Now initialise the map
var mapstraction = new Mapstraction('themap','google');
mapstraction.addControls({
zoom: 'large',
map_type: true
});
// Show map centred on Brighton
mapstraction.setCenterAndZoom(
new LatLonPoint(50.82423734980143, -0.14007568359375),
15 // Zoom level appropriate for Brighton city centre
);
// Geocode each hcard and add a marker
jQuery('.vcard').each(function() {
var hcard = jQuery(this);
var streetaddress = hcard.find('.street-address').text();
var postcode = hcard.find('.postal-code').text();
var geocoder = new MapstractionGeocoder(function(result) {
var marker = new Marker(result.point);
marker.setInfoBubble(
'<div class="bubble">' + hcard.html() + '</div>'
);
mapstraction.addMarker(marker);
}, 'google');
geocoder.geocode({'address': streetaddress + ', ' + postcode});
});
});
Here’s the finished code.
There’s one last shortcut we can add: jQuery provides the $ symbol as an alias for jQuery. We could just go through our code and replace every call to jQuery() with a call to $(), but this would cause incompatibilities if we ever attempted to use our script on a page that also includes the Prototype library. A more robust approach is to start our code with the following:
jQuery(function($) {
// Within this function, $ now refers to jQuery
// ...
});
jQuery cleverly passes itself as the first argument to any function registered to the DOM ready event, which means we can assign a local $ variable shortcut without affecting the $ symbol in the global scope. This makes it easy to use jQuery with other libraries.
Limitations of Geocoding
You may have noticed a discrepancy creep in to the last example: whereas my original list included seven restaurants, the geocoding example only shows five. This is because the Google Maps geocoder incorporates a rate limit: more than five lookups in a second and it starts returning error messages instead of regular results.
In addition to this problem, geocoding itself is an inexact science: while UK postcodes generally get you down to the correct street, figuring out the exact point on the street from the provided address usually isn’t too accurate (although Google do a pretty good job).
Finally, there’s the performance overhead. We’re making five geocoding requests to Google for every page served, even though the restaurants themselves aren’t likely to change location any time soon. Surely there’s a better way of doing this?
Microformats to the rescue (again)! The geo microformat suggests simple classes for including latitude and longitude information in a page. We can add specific points for each restaurant using the following markup:
<li class="vcard">
<h3 class="fn org">E-Kagen</h3>
<div class="adr">
<p class="street-address">22-23 Sydney Street</p>
<p><span class="locality">Brighton</span>, <abbr class="country-name" title="United Kingdom">UK</abbr></p>
<p class="postal-code">BN1 4EN</p>
</div>
<p>Telephone: <span class="tel">+44 (0)1273 687 068</span></p>
<p class="geo">Lat/Lon:
<span class="latitude">50.827917</span>,
<span class="longitude">-0.137764</span>
</p>
</li>
As before, I used www.getlatlon.com to find the exact locations – I find satellite view is particularly useful for locating individual buildings.
Latitudes and longitudes are great for machines but not so useful for human beings. We could hide them entirely with display: none, but I prefer to merely de-emphasise them (someone might want them for their GPS unit):
.vcard .geo {
margin-top: 0.5em;
font-size: 0.85em;
color: #ccc;
}
It’s probably a good idea to hide them completely when they’re displayed inside an info bubble:
.bubble .geo {
display: none;
}
We can extract the co-ordinates in the same way we extracted the address. Since we’re no longer geocoding anything our code becomes a lot simpler:
$('.vcard').each(function() {
var hcard = $(this);
var latitude = hcard.find('.geo .latitude').text();
var longitude = hcard.find('.geo .longitude').text();
var marker = new Marker(new LatLonPoint(latitude, longitude));
marker.setInfoBubble(
'<div class="bubble">' + hcard.html() + '</div>'
);
mapstraction.addMarker(marker);
});
And here’s the finished geo example.
Further reading
We’ve only scratched the surface of what’s possible with microformats, jQuery (or just regular JavaScript) and a bit of imagination. If this example has piqued your interest, the following links should give you some more food for thought.
The hCard specification
Notes on parsing hCards
jQuery for JavaScript programmers – my extended tutorial on jQuery.
Dann Webb’s Sumo – a full JavaScript library for parsing microformats, based around some clever metaprogramming techniques.
Jeremy Keith’s Adactio Austin – the first place I saw using microformats to unobtrusively plot locations on a map. Makes clever use of hEvent as well. |
2007 |
Simon Willison |
simonwillison |
2007-12-12T00:00:00+00:00 |
https://24ways.org/2007/unobtrusively-mapping-microformats-with-jquery/ |
code |
| 169 |
Incite A Riot |
Given its relatively limited scope, HTML can be remarkably expressive. With a bit of lateral thinking, we can mark up content such as tag clouds and progress meters, even when we don’t have explicit HTML elements for those patterns.
Suppose we want to mark up a short conversation:
Alice: I think Eve is watching.
Bob: This isn’t a cryptography tutorial …we’re in the wrong example!
A note in the the HTML 4.01 spec says it’s okay to use a definition list:
Another application of DL, for example, is for marking up dialogues, with each DT naming a speaker, and each DD containing his or her words.
That would give us:
<dl>
<dt>Alice</dt>: <dd>I think Eve is watching.</dd>
<dt>Bob</dt>: <dd>This isn't a cryptography tutorial ...we're in the wrong example!</dd>
</dl>
This usage of a definition list is proof that writing W3C specifications and smoking crack are not mutually exclusive activities. “I think Eve is watching” is not a definition of “Alice.” If you (ab)use a definition list in this way, Norm will hunt you down.
The conversation problem was revisited in HTML5. What if dt and dd didn’t always mean “definition title” and “definition description”? A new element was forged: dialog. Now the the “d” in dt and dd doesn’t stand for “definition”, it stands for “dialog” (or “dialogue” if you can spell):
<dialog>
<dt>Alice</dt>: <dd>I think Eve is watching.</dd>
<dt>Bob</dt>: <dd>This isn't a cryptography tutorial ...we're in the wrong example!</dd>
</dialog>
Problem solved …except that dialog is no longer in the HTML5 spec. Hixie further expanded the meaning of dt and dd so that they could be used inside details (which makes sense—it starts with a “d”) and figure (…um). At the same time as the content model of details and figure were being updated, the completely-unrelated dialog element was dropped.
Back to the drawing board, or in this case, the HTML 4.01 specification. The spec defines the cite element thusly:
Contains a citation or a reference to other sources.
Perfect! There’s even an example showing how this can applied when attributing quotes to people:
As <CITE>Harry S. Truman</CITE> said,
<Q lang="en-us">The buck stops here.</Q>
For longer quotes, the blockquote element might be more appropriate. In a conversation, where the order matters, I think an ordered list would make a good containing element for this pattern:
<ol>
<li><cite>Alice</cite>: <q>I think Eve is watching.</q></li>
<li><cite>Bob</cite>: <q>This isn't a cryptography tutorial ...we're in the wrong example!</q></li>
</ol>
Problem solved …except that the cite element has been redefined in the HTML5 spec:
The cite element represents the title of a work … A person’s name is not the title of a work … and the element must therefore not be used to mark up people’s names.
HTML5 is supposed to be backwards compatible with previous versions of HTML, yet here we have a semantic pattern already defined in HTML 4.01 that is now non-conforming in HTML5. The entire justification for the change boils down to this line of reasoning:
Given that: titles of works are often italicised and
given that: people’s names are not often italicised and
given that: most browsers italicise the contents of the cite element,
therefore: the cite element should not be used to mark up people’s names.
In other words, the default browser styling is now dictating semantic meaning. The tail is wagging the dog.
Not to worry, the HTML5 spec tells us how we can mark up names in conversations without using the cite element:
In some cases, the b element might be appropriate for names
I believe the colloquial response to this is a combination of the letters W, T and F, followed by a question mark.
The non-normative note continues:
In other cases, if an element is really needed, the span element can be used.
This is not a joke. We are seriously being told to use semantically meaningless elements to mark up content that is semantically meaningful.
We don’t have to take it.
Firstly, any conformance checker—that’s the new politically correct term for “validator”—cannot possibly check every instance of the cite element to see if it’s really the title of a work and not the name of a person. So we can disobey the specification without fear of invalidating our documents.
Secondly, Hixie has repeatedly stated that browser makers have a powerful voice in deciding what goes into the HTML5 spec; if a browser maker refuses to implement a feature, then that feature should come out of the spec because otherwise, the spec is fiction. Well, one of the design principles of HTML5 is the Priority of Constituencies:
In case of conflict, consider users over authors over implementors over specifiers over theoretical purity.
That places us—authors—above browser makers. If we resolutely refuse to implement part of the HTML5 spec, then the spec becomes fiction.
Join me in a campaign of civil disobedience against the unnecessarily restrictive, backwards-incompatible change to the cite element. Start using HTML5 but start using it sensibly. Let’s ensure that bad advice remains fictitious.
Tantek has set up a page on the WHATWG wiki to document usage of the cite element for conversations. Please contribute to it. |
2009 |
Jeremy Keith |
jeremykeith |
2009-12-11T00:00:00+00:00 |
https://24ways.org/2009/incite-a-riot/ |
code |
| 171 |
Rock Solid HTML Emails |
At some stage in your career, it’s likely you’ll be asked by a client to design a HTML email. Before you rush to explain that all the cool kids are using social media, keep in mind that when done correctly, email is still one of the best ways to promote you and your clients online. In fact, a recent survey showed that every dollar spent on email marketing this year generated more than $40 in return. That’s more than any other marketing channel, including the cool ones.
There are a whole host of ingredients that contribute to a good email marketing campaign. Permission, relevance, timeliness and engaging content are all important. Even so, the biggest challenge for designers still remains building an email that renders well across all the popular email clients.
Same same, but different
Before getting into the details, there are some uncomfortable facts that those new to HTML email should be aware of. Building an email is not like building for the web. While web browsers continue their onward march towards standards, many email clients have stubbornly stayed put. Some have even gone backwards. In 2007, Microsoft switched the Outlook rendering engine from Internet Explorer to Word. Yes, as in the word processor. Add to this the quirks of the major web-based email clients like Gmail and Hotmail, sprinkle in a little Lotus Notes and you’ll soon realize how different the email game is.
While it’s not without its challenges, rest assured it can be done. In my experience the key is to focus on three things. First, you should keep it simple. The more complex your email design, the more likely is it to choke on one of the popular clients with poor standards support. Second, you need to take your coding skills back a good decade. That often means nesting tables, bringing CSS inline and following the coding guidelines I’ll outline below. Finally, you need to test your designs regularly. Just because a template looks nice in Hotmail now, doesn’t mean it will next week.
Setting your lowest common denominator
To maintain your sanity, it’s a good idea to decide exactly which email clients you plan on supporting when building a HTML email. While general research is helpful, the email clients your subscribers are using can vary significantly from list to list. If you have the time there are a number of tools that can tell you specifically which email clients your subscribers are using. Trust me, if the testing shows almost none of them are using a client like Lotus Notes, save yourself some frustration and ignore it altogether.
Knowing which email clients you’re targeting not only makes the building process easier, it can save you lots of time in the testing phase too. For the purpose of this article, I’ll be sharing techniques that give the best results across all of the popular clients, including the notorious ones like Gmail, Lotus Notes 6 and Outlook 2007. Just remember that pixel perfection in all email clients is a pipe dream.
Let’s get started.
Use tables for layout
Because clients like Gmail and Outlook 2007 have poor support for float, margin and padding, you’ll need to use tables as the framework of your email. While nested tables are widely supported, consistent treatment of width, margin and padding within table cells is not. For the best results, keep the following in mind when coding your table structure.
Set the width in each cell, not the table
When you combine table widths, td widths, td padding and CSS padding into an email, the final result is different in almost every email client. The most reliable way to set the width of your table is to set a width for each cell, not for the table itself.
<table cellspacing="0" cellpadding="10" border="0">
<tr>
<td width="80"></td>
<td width="280"></td>
</tr>
</table>
Never assume that if you don’t specify a cell width the email client will figure it out. It won’t. Also avoid using percentage based widths. Clients like Outlook 2007 don’t respect them, especially for nested tables. Stick to pixels. If you want to add padding to each cell, use either the cellpadding attribute of the table or CSS padding for each cell, but never combine the two.
Err toward nesting
Table nesting is far more reliable than setting left and right margins or padding for table cells. If you can achieve the same effect by table nesting, that will always give you the best result across the buggier email clients.
Use a container table for body background colors
Many email clients ignore background colors specified in your CSS or the <body> tag. To work around this, wrap your entire email with a 100% width table and give that a background color.
<table cellspacing="0" cellpadding="0" border="0" width="100%">
<tr>
<td bgcolor=”#000000”>
Your email code goes here.
</td>
</tr>
</table>
You can use the same approach for background images too. Just remember that some email clients don’t support them, so always provide a fallback color.
Avoid unnecessary whitespace in table cells
Where possible, avoid whitespace between your <td> tags. Some email clients (ahem, Yahoo! and Hotmail) can add additional padding above or below the cell contents in some scenarios, breaking your design for no apparent reason.
CSS and general font formatting
While some email designers do their best to avoid CSS altogether and rely on the dreaded <font> tag, the truth is many CSS properties are well supported by most email clients. See this comprehensive list of CSS support across the major clients for a good idea of the safe properties and those that should be avoided.
Always move your CSS inline
Gmail is the culprit for this one. By stripping the CSS from the <head> and <body> of any email, we’re left with no choice but to move all CSS inline. The good news is this is something you can almost completely automate. Free services like Premailer will move all CSS inline with the click of a button. I recommend leaving this step to the end of your build process so you can utilize all the benefits of CSS.
Avoid shorthand for fonts and hex notation
A number of email clients reject CSS shorthand for the font property. For example, never set your font styles like this.
p {
font:bold 1em/1.2em georgia,times,serif;
}
Instead, declare the properties individually like this.
p {
font-weight: bold;
font-size: 1em;
line-height: 1.2em;
font-family: georgia,times,serif;
}
While we’re on the topic of fonts, I recently tested every conceivable variation of @font-face across the major email clients. The results were dismal, so unfortunately it’s web-safe fonts in email for the foreseeable future.
When declaring the color property in your CSS, some email clients don’t support shorthand hexadecimal colors like color:#f60; instead of color:#ff6600;. Stick to the longhand approach for the best results.
Paragraphs
Just like table cell spacing, paragraph spacing can be tricky to get a consistent result across the board. I’ve seen many designers revert to using double <br /> or DIVs with inline CSS margins to work around these shortfalls, but recent testing showed that paragraph support is now reliable enough to use in most cases (there was a time when Yahoo! didn’t support the paragraph tag at all).
The best approach is to set the margin inline via CSS for every paragraph in your email, like so:
p {
margin: 0 0 1.6em 0;
}
Again, do this via CSS in the head when building your email, then use Premailer to bring it inline for each paragraph later.
If part of your design is height-sensitive and calls for pixel perfection, I recommend avoiding paragraphs altogether and setting the text formatting inline in the table cell. You might need to use table nesting or cellpadding / CSS to get the desired result. Here’s an example:
<td width="200" style="font-weight:bold; font-size:1em; line-height:1.2em; font-family:georgia,'times',serif;">your height sensitive text</td>
Links
Some email clients will overwrite your link colors with their defaults, and you can avoid this by taking two steps. First, set a default color for each link inline like so:
<a href="http://somesite.com/" style="color:#ff00ff">this is a link</a>
Next, add a redundant span inside the a tag.
<a href="http://somesite.com/" style="color:#ff00ff"><span style="color:#ff00ff">this is a link</span></a>
To some this may be overkill, but if link color is important to your design then a superfluous span is the best way to achieve consistency.
Images in HTML emails
The most important thing to remember about images in email is that they won’t be visible by default for many subscribers. If you start your design with that assumption, it forces you to keep things simple and ensure no important content is suppressed by image blocking.
With this in mind, here are the essentials to remember when using images in HTML email:
Avoid spacer images
While the combination of spacer images and nested tables was popular on the web ten years ago, image blocking in many email clients has ruled it out as a reliable technique today. Most clients replace images with an empty placeholder in the same dimensions, others strip the image altogether. Given image blocking is on by default in most email clients, this can lead to a poor first impression for many of your subscribers. Stick to fixed cell widths to keep your formatting in place with or without images.
Always include the dimensions of your image
If you forget to set the dimensions for each image, a number of clients will invent their own sizes when images are blocked and break your layout. Also, ensure that any images are correctly sized before adding them to your email. Some email clients will ignore the dimensions specified in code and rely on the true dimensions of your image.
Avoid PNGs
Lotus Notes 6 and 7 don’t support 8-bit or 24-bit PNG images, so stick with the GIF or JPG formats for all images, even if it means some additional file size.
Provide fallback colors for background images
Outlook 2007 has no support for background images (aside from this hack to get full page background images working). If you want to use a background image in your design, always provide a background color the email client can fall back on. This solves both the image blocking and Outlook 2007 problem simultaneously.
Don’t forget alt text
Lack of standards support means email clients have long destroyed the chances of a semantic and accessible HTML email. Even still, providing alt text is important from an image blocking perspective. Even with images suppressed by default, many email clients will display the provided alt text instead. Just remember that some email clients like Outlook 2007, Hotmail and Apple Mail don’t support alt text at all when images are blocked.
Use the display hack for Hotmail
For some inexplicable reason, Windows Live Hotmail adds a few pixels of additional padding below images. A workaround is to set the display property like so.
img {display:block;}
This removes the padding in Hotmail and still gives you the predicable result in other email clients.
Don’t use floats
Both Outlook 2007 and earlier versions of Notes offer no support for the float property. Instead, use the align attribute of the img tag to float images in your email.
<img src="image.jpg" align="right">
If you’re seeing strange image behavior in Yahoo! Mail, adding align=“top” to your images can often solve this problem.
Video in email
With no support for JavaScript or the object tag, video in email (if you can call it that) has long been limited to animated gifs. However, some recent research I did into the HTML5 video tag in email showed some promising results.
Turns out HTML5 video does work in many email clients right now, including Apple Mail, Entourage 2008, MobileMe and the iPhone. The real benefit of this approach is that if the video isn’t supported, you can provide reliable fallback content such as an animated GIF or a clickable image linking to the video in the browser.
Of course, the question of whether you should add video to email is another issue altogether. If you lean toward the “yes” side check out the technique with code samples.
What about mobile email?
The mobile email landscape was a huge mess until recently. With the advent of the iPhone, Android and big improvements from Palm and RIM, it’s becoming less important to think of mobile as a different email platform altogether.
That said, there are a few key pointers to keep in mind when coding your emails to get a decent result for your more mobile subscribers.
Keep the width less than 600 pixels
Because of email client preview panes, this rule was important long before mobile email clients came of age. In truth, the iPhone and Pre have a viewport of 320 pixels, the Droid 480 pixels and the Blackberry models hover around 360 pixels. Sticking to a maximum of 600 pixels wide ensures your design should still be readable when scaled down for each device. This width also gives good results in desktop and web-based preview panes.
Be aware of automatic text resizing
In what is almost always a good feature, email clients using webkit (such as the iPhone, Pre and Android) can automatically adjust font sizes to increase readability. If testing shows this feature is doing more harm than good to your design, you can always disable it with the following CSS rule:
-webkit-text-size-adjust: none;
Don’t forget to test
While standards support in email clients hasn’t made much progress in the last few years, there has been continual change (for better or worse) in some email clients. Web-based providers like Yahoo!, Hotmail and Gmail are notorious for this. On countless occasions I’ve seen a proven design suddenly stop working without explanation.
For this reason alone it’s important to retest your email designs on a regular basis. I find a quick test every month or so does the trick, especially in the web-based clients. The good news is that after designing and testing a few HTML email campaigns, you will find that order will emerge from the chaos. Many of these pitfalls will become quite predictable and your inbox-friendly designs will take shape with them in mind.
Looking ahead
Designing HTML email can be a tough pill for new designers and standardistas to swallow, especially given the fickle and retrospective nature of email clients today. With HTML5 just around the corner we are entering a new, uncertain phase. Will email client developers take the opportunity to repent on past mistakes and bring email clients into the present? The aim of groups such as the Email Standards Project is to make much of the above advice as redundant as the long-forgotten <blink> and <marquee> tags, however, only time will tell if this is to become a reality.
Although not the most compliant (or fashionable) medium, the results speak for themselves – email is, and will continue to be one of the most successful and targeted marketing channels available to you. As a designer with HTML email design skills in your arsenal, you have the opportunity to not only broaden your service offering, but gain a unique appreciation of how vital standards are.
Next steps
Ready to get started? There are a number of HTML email design galleries to provide ideas and inspiration for your own designs.
http://www.campaignmonitor.com/gallery/
http://htmlemailgallery.com/
http://inboxaward.com/
Enjoy! |
2009 |
David Greiner |
davidgreiner |
2009-12-13T00:00:00+00:00 |
https://24ways.org/2009/rock-solid-html-emails/ |
code |
| 175 |
Front-End Code Reusability with CSS and JavaScript |
Most web standards-based developers are more than familiar with creating their sites with semantic HTML with lots and lots of CSS. With each new page in a design, the CSS tends to grow and grow and more elements and styles are added. But CSS can be used to better effect.
The idea of object-oriented CSS isn’t new. Nicole Sullivan has written a presentation on the subject and outlines two main concepts: separate structure and visual design; and separate container and content. Jeff Croft talks about Applying OOP Concepts to CSS:
I can make a class of .box that defines some basic layout structure, and another class of .rounded that provides rounded corners, and classes of .wide and .narrow that define some widths, and then easily create boxes of varying widths and styles by assigning multiple classes to an element, without having to duplicate code in my CSS.
This concept helps reduce CSS file size, allows for great flexibility, rapid building of similar content areas and means greater consistency throughout the entire design. You can also take this concept one step further and apply it to site behaviour with JavaScript.
Build a versatile slideshow
I will show you how to build multiple slideshows using jQuery, allowing varying levels of functionality which you may find on one site design. The code will be flexible enough to allow you to add previous/next links, image pagination and the ability to change the animation type. More importantly, it will allow you to apply any combination of these features.
Image galleries are simply a list of images, so the obvious choice of marking the content up is to use a <ul>. Many designs, however, do not cater to non-JavaScript versions of the website, and thus don’t take in to account large multiple images. You could also simply hide all the other images in the list, apart from the first image. This method can waste bandwidth because the other images might be downloaded when they are never going to be seen.
Taking this second concept — only showing one image — the only code you need to start your slideshow is an <img> tag. The other images can be loaded dynamically via either a per-page JavaScript array or via AJAX.
The slideshow concept is built upon the very versatile Cycle jQuery Plugin and is structured in to another reusable jQuery plugin. Below is the HTML and JavaScript snippet needed to run every different type of slideshow I have mentioned above.
<img src="path/to/image.jpg" alt="About the image" title="" height="250" width="400" class="slideshow">
<script type="text/javascript">
jQuery().ready(function($) {
$('img.slideshow').slideShow({
images: ['1.jpg', '2.jpg', '3.jpg']
});
});
</script>
Slideshow plugin
If you’re not familiar with jQuery or how to write and author your own plugin there are plenty of articles to help you out.
jQuery has a chainable interface and this is something your plugin must implement. This is easy to achieve, so your plugin simply returns the collection it is using:
return this.each(
function () {}
};
Local Variables
To keep the JavaScript clean and avoid any conflicts, you must set up any variables which are local to the plugin and should be used on each collection item. Defining all your variables at the top under one statement makes adding more and finding which variables are used easier. For other tips, conventions and improvements check out JSLint, the “JavaScript Code Quality Tool”.
var $$, $div, $images, $arrows, $pager,
id, selector, path, o, options,
height, width,
list = [], li = 0,
parts = [], pi = 0,
arrows = ['Previous', 'Next'];
Cache jQuery Objects
It is good practice to cache any calls made to jQuery. This reduces wasted DOM calls, can improve the speed of your JavaScript code and makes code more reusable.
The following code snippet caches the current selected DOM element as a jQuery object using the variable name $$. Secondly, the plugin makes its settings available to the Metadata plugin‡ which is best practice within jQuery plugins.
For each slideshow the plugin generates a <div> with a class of slideshow and a unique id. This is used to wrap the slideshow images, pagination and controls.
The base path which is used for all the images in the slideshow is calculated based on the existing image which appears on the page. For example, if the path to the image on the page was /img/flowers/1.jpg the plugin would use the path /img/flowers/ to load the other images.
$$ = $(this);
o = $.metadata ? $.extend({}, settings, $$.metadata()) : settings;
id = 'slideshow-' + (i++ + 1);
$div = $('<div />').addClass('slideshow').attr('id', id);
selector = '#' + id + ' ';
path = $$.attr('src').replace(/[0-9]\.jpg/g, '');
options = {};
height = $$.height();
width = $$.width();
Note: the plugin uses conventions such as folder structure and numeric filenames. These conventions help with the reusable aspect of plugins and best practices.
Build the Images
The cycle plugin uses a list of images to create the slideshow. Because we chose to start with one image we must now build the list programmatically. This is a case of looping through the images which were added via the plugin options, building the appropriate HTML and appending the resulting <ul> to the DOM.
$.each(o.images, function () {
list[li++] = '<li>';
list[li++] = '<img src="' + path + this + '" height="' + height + '" width="' + width + '">';
list[li++] = '</li>';
});
$images = $('<ul />').addClass('cycle-images');
$images.append(list.join('')).appendTo($div);
Although jQuery provides the append method it is much faster to create one really long string and append it to the DOM at the end.
Update the Options
Here are some of the options we’re making available by simply adding classes to the <img>. You can change the slideshow effect from the default fade to the sliding effect. By adding the class of stopped the slideshow will not auto-play and must be controlled via pagination or previous and next links.
// different effect
if ($$.is('.slide')) {
options.fx = 'scrollHorz';
}
// don't move by default
if ($$.is('.stopped')) {
options.timeout = 0;
}
If you are using the same set of images throughout a website you may wish to start on a different image on each page or section. This can be easily achieved by simply adding the appropriate starting class to the <img>.
// based on the class name on the image
if ($$.is('[class*=start-]')) {
options.startingSlide = parseInt($$.attr('class').replace(/.*start-([0-9]+).*/g, "$1"), 10) - 1;
}
For example:
<img src="/img/slideshow/3.jpg" alt="About the image" title="" height="250" width="400" class="slideshow start-3">
By default, and without JavaScript, the third image in this slideshow is shown. When the JavaScript is applied to the page the slideshow must know to start from the correct place, this is why the start class is required.
You could capture the default image name and parse it to get the position, but only the default image needs to be numeric to work with this plugin (and could easily be changed in future). Therefore, this extra specifically defined option means the plugin is more tolerant.
Previous/Next Links
A common feature of slideshows is previous and next links enabling the user to manually progress the images. The Cycle plugin supports this functionality, but you must generate the markup yourself. Most people add these directly in the HTML but normally only support their behaviour when JavaScript is enabled. This goes against progressive enhancement. To keep with the best practice progress enhancement method the previous/next links should be generated with JavaScript.
The follow snippet checks whether the slideshow requires the previous/next links, via the arrows class. It restricts the Cycle plugin to the specific slideshow using the selector we created at the top of the plugin. This means multiple slideshows can run on one page without conflicting each other.
The code creates a <ul> using the arrows array we defined at the top of the plugin. It also adds a class to the slideshow container, meaning you can style different combinations of options in your CSS.
// create the arrows
if ($$.is('.arrows') && list.length > 1) {
options.next = selector + '.next';
options.prev = selector + '.previous';
$arrows = $('<ul />').addClass('cycle-arrows');
$.each(arrows, function (i, val) {
parts[pi++] = '<li class="' + val.toLowerCase() + '">';
parts[pi++] = '<a href="#' + val.toLowerCase() + '">';
parts[pi++] = '<span>' + val + '</span>';
parts[pi++] = '</a>';
parts[pi++] = '</li>';
});
$arrows.append(parts.join('')).appendTo($div);
$div.addClass('has-cycle-arrows');
}
The arrow array could be placed inside the plugin settings to allow for localisation.
Pagination
The Cycle plugin creates its own HTML for the pagination of the slideshow. All our plugin needs to do is create the list and selector to use. This snippet creates the pagination container and appends it to our specific slideshow container. It sets the Cycle plugin pager option, restricting it to the specific slideshow using the selector we created at the top of the plugin. Like the previous/next links, a class is added to the slideshow container allowing you to style the slideshow itself differently.
// create the clickable pagination
if ($$.is('.pagination') && list.length > 1) {
options.pager = selector + '.cycle-pagination';
$pager = $('<ul />').addClass('cycle-pagination');
$pager.appendTo($div);
$div.addClass('has-cycle-pagination');
}
Note: the Cycle plugin creates a <ul> with anchors listed directly inside without the surrounding <li>. Unfortunately this is invalid markup but the code still works.
Demos
Well, that describes all the ins-and-outs of the plugin, but demos make it easier to understand! Viewing the source on the demo page shows some of the combinations you can create with a simple <img>, a few classes and some thought-out JavaScript.
View the demos →
Decide on defaults
The slideshow plugin uses the exact same settings as the Cycle plugin, but some are explicitly set within the slideshow plugin when using the classes you have set.
When deciding on what functionality is going to be controlled via this class method, be careful to choose your defaults wisely. If all slideshows should auto-play, don’t make this an option — make the option to stop the auto-play. Similarly, if every slideshow should have previous/next functionality make this the default and expose the ability to remove them with a class such as “no-pagination”.
In the examples presented on this article I have used a class on each <img>. You can easily change this to anything you want and simply apply the plugin based on the jQuery selector required.
Grab your images
If you are using AJAX to load in your images, you can speed up development by deciding on and keeping to a folder structure and naming convention. There are two methods: basing the image path based on the current URL; or based on the src of the image. The first allows a different slideshow on each page, but in many instances a site will have a couple of sets of images and therefore the second method is probably preferred.
Metadata ‡
A method which allows you to directly modify settings in certain plugins, which also uses the classes from your HTML already exists. This is a jQuery plugin called Metadata. This method allows for finer control over the plugin settings themselves. Some people, however, may dislike the syntax and prefer using normal classes, like above which when sprinkled with a bit more JavaScript allows you to control what you need to control.
The takeaway
Hopefully you have understood not only what goes in to a basic jQuery plugin but also learnt a new and powerful idea which you can apply to other areas of your website.
The idea can also be applied to other common interfaces such as lightboxes or mapping services such as Google Maps — for example creating markers based on a list of places, each with different pin icons based the anchor class. |
2009 |
Trevor Morris |
trevormorris |
2009-12-06T00:00:00+00:00 |
https://24ways.org/2009/front-end-code-reusability-with-css-and-javascript/ |
code |
| 177 |
HTML5: Tool of Satan, or Yule of Santa? |
It would lead to unseasonal arguments to discuss the title of this piece here, and the arguments are as indigestible as the fourth turkey curry of the season, so we’ll restrict our article to the practical rather than the philosophical: what HTML5 can you reasonably expect to be able to use reliably cross-browser in the early months of 2010?
The answer is that you can use more than you might think, due to the seasonal tinsel of feature-detection and using the sparkly pixie-dust of IE-only VML (but used in a way that won’t damage your Elf).
Canvas
canvas is a 2D drawing API that defines a blank area of the screen of arbitrary size, and allows you to draw on it using JavaScript. The pictures can be animated, such as in this canvas mashup of Wolfenstein 3D and Flickr. (The difference between canvas and SVG is that SVG uses vector graphics, so is infinitely scalable. It also keeps a DOM, whereas canvas is just pixels so you have to do all your own book-keeping yourself in JavaScript if you want to know where aliens are on screen, or do collision detection.)
Previously, you needed to do this using Adobe Flash or Java applets, requiring plugins and potentially compromising keyboard accessibility. Canvas drawing is supported now in Opera, Safari, Chrome and Firefox. The reindeer in the corner is, of course, Internet Explorer, which currently has zero support for canvas (or SVG, come to that).
Now, don’t pull a face like all you’ve found in your Yuletide stocking is a mouldy satsuma and a couple of nuts—that’s not the end of the story. Canvas was originally an Apple proprietary technology, and Internet Explorer had a similar one called Vector Markup Language which was submitted to the W3C for standardisation in 1998 but which, unlike canvas, was not blessed with retrospective standardisation.
What you need, then, is some way for Internet Explorer to translate canvas to VML on-the-fly, while leaving the other, more standards-compliant browsers to use the HTML5. And such a way exists—it’s a JavaScript library called excanvas. It’s downloadable from http://code.google.com/p/explorercanvas/ and it’s simple to include it via a conditional comment in the head for IE:
<!--[if IE]>
<script src="excanvas.js"></script>
<![endif]-->
Simply include this, and your canvas will be natively supported in the modern browsers (and the library won’t even be downloaded) whereas IE will suddenly render your canvas using its own VML engine. Be sure, however, to check it carefully, as the IE JavaScript engine isn’t so fast and you’ll need to be sure that performance isn’t too degraded to use.
Forms
Since the beginning of the Web, developers have been coding forms, and then writing JavaScript to check whether an input is a correctly formed email address, URL, credit card number or conforms to some other pattern. The cumulative labour of the world’s developers over the last 15 years makes whizzing round in a sleigh and delivering presents seem like popping to the corner shop in comparison.
With HTML5, that’s all about to change. As Yaili began to explore on Day 3, a host of new attributes to the input element provide built-in validation for email address formats (input type=email), URLs (input type=url), any pattern that can be expressed with a JavaScript-syntax regex (pattern="[0-9][A-Z]{3}") and the like. New attributes such as required, autofocus, input type=number min=3 max=50 remove much of the tedious JavaScript from form validation.
Other, really exciting input types are available (see all input types). The datalist is reminiscent of a select box, but allows the user to enter their own text if they don’t want to choose one of the pre-defined options. input type=range is rendered as a slider, while input type=date pops up a date picker, all natively in the browser with no JavaScript required at all.
Currently, support is most complete in an experimental implementation in Opera and a number of the new attributes in Webkit-based browsers. But don’t let that stop you! The clever thing about the specification of the new Web Forms is that all the new input types are attributes (rather than elements). input defaults to input type=text, so if a browser doesn’t understand a new HTML5 type, it gracefully degrades to a plain text input.
So where does that leave validation in those browsers that don’t support Web Forms? The answer is that you don’t retire your pre-existing JavaScript validation just yet, but you leave it as a fallback after doing some feature detection. To detect whether (say) input type=email is supported, you make a new input type=email with JavaScript but don’t add it to the page. Then, you interrogate your new element to find out what its type attribute is. If it’s reported back as “email”, then the browser supports the new feature, so let it do its work and don’t bring in any JavaScript validation. If it’s reported back as “text”, it’s fallen back to the default, indicating that it’s not supported, so your code should branch to your old validation routines. Alternatively, use the small (7K) Modernizr library which will do this work for you and give you JavaScript booleans like Modernizr.inputtypes[email] set to true or false.
So what does this buy you? Well, first and foremost, you’re future-proofing your code for that time when all browsers support these hugely useful additions to forms. Secondly, you buy a usability and accessibility win. Although it’s tempting to style the stuffing out of your form fields (which can, incidentally, lead to madness), whatever your branding people say, it’s better to leave forms as close to the browser defaults as possible. A browser’s slider and date pickers will be the same across different sites, making it much more comprehensible to users. And, by using native controls rather than faking sliders and date pickers with JavaScript, your forms are much more likely to be accessible to users of assistive technology.
HTML5 DOCTYPE
You can use the new DOCTYPE !doctype html now and – hey presto – you’re writing HTML5, as it’s pretty much a superset of HTML4. There are some useful advantages to doing this. The first is that the HTML5 validator (I use http://html5.validator.nu) also validates ARIA information, whereas the HTML4 validator doesn’t, as ARIA is a new spec developed after HTML4. (Actually, it’s more accurate to say that it doesn’t validate your ARIA attributes, but it doesn’t automatically report them as an error.)
Another advantage is that HTML5 allows tabindex as a global attribute (that is, on any element). Although originally designed as an accessibility bolt-on, I ordinarily advise you don’t use it; a well-structured page should provide a logical tab order through links and form fields already.
However, tabindex="-1" is a legal value in HTML5 as it allows for the element to be programmatically focussable by JavaScript. It’s also very useful for correcting a bug in Internet Explorer when used with a keyboard; in-page links go nowhere if the destination doesn’t have a proprietary property called hasLayout set or a tabindex of -1.
So, whether it is the tool of Satan or yule of Santa, HTML5 is just around the corner. Some you can use now, and by the end of 2010 I predict you’ll be able to use a whole lot more as new browser versions are released. |
2009 |
Bruce Lawson |
brucelawson |
2009-12-05T00:00:00+00:00 |
https://24ways.org/2009/html5-tool-of-satan-or-yule-of-santa/ |
code |
| 179 |
Have a Field Day with HTML5 Forms |
Forms are usually seen as that obnoxious thing we have to markup and style. I respectfully disagree: forms (on a par with tables) are the most exciting thing we have to work with.
Here we’re going to take a look at how to style a beautiful HTML5 form using some advanced CSS and latest CSS3 techniques. I promise you will want to style your own forms after you’ve read this article.
Here’s what we’ll be creating:
The form. (Icons from Chalkwork Payments)
Meaningful markup
We’re going to style a simple payment form. There are three main sections on this form:
The person’s details
The address details
The credit card details
We are also going to use some of HTML5’s new input types and attributes to create more meaningful fields and use less unnecessary classes and ids:
email, for the email field
tel, for the telephone field
number, for the credit card number and security code
required, for required fields
placeholder, for the hints within some of the fields
autofocus, to put focus on the first input field when the page loads
There are a million more new input types and form attributes on HTML5, and you should definitely take a look at what’s new on the W3C website. Hopefully this will give you a good idea of how much more fun form markup can be.
A good foundation
Each section of the form will be contained within its own fieldset. In the case of the radio buttons for choosing the card type, we will enclose those options in another nested fieldset.
We will also be using an ordered list to group each label / input pair. This will provide us with a (kind of) semantic styling hook and it will also make the form easier to read when viewing with no CSS applied:
The unstyled form
So here’s the markup we are going to be working with:
<form id=payment>
<fieldset>
<legend>Your details</legend>
<ol>
<li>
<label for=name>Name</label>
<input id=name name=name type=text placeholder="First and last name" required autofocus>
</li>
<li>
<label for=email>Email</label>
<input id=email name=email type=email placeholder="example@domain.com" required>
</li>
<li>
<label for=phone>Phone</label>
<input id=phone name=phone type=tel placeholder="Eg. +447500000000" required>
</li>
</ol>
</fieldset>
<fieldset>
<legend>Delivery address</legend>
<ol>
<li>
<label for=address>Address</label>
<textarea id=address name=address rows=5 required></textarea>
</li>
<li>
<label for=postcode>Post code</label>
<input id=postcode name=postcode type=text required>
</li>
<li>
<label for=country>Country</label>
<input id=country name=country type=text required>
</li>
</ol>
</fieldset>
<fieldset>
<legend>Card details</legend>
<ol>
<li>
<fieldset>
<legend>Card type</legend>
<ol>
<li>
<input id=visa name=cardtype type=radio>
<label for=visa>VISA</label>
</li>
<li>
<input id=amex name=cardtype type=radio>
<label for=amex>AmEx</label>
</li>
<li>
<input id=mastercard name=cardtype type=radio>
<label for=mastercard>Mastercard</label>
</li>
</ol>
</fieldset>
</li>
<li>
<label for=cardnumber>Card number</label>
<input id=cardnumber name=cardnumber type=number required>
</li>
<li>
<label for=secure>Security code</label>
<input id=secure name=secure type=number required>
</li>
<li>
<label for=namecard>Name on card</label>
<input id=namecard name=namecard type=text placeholder="Exact name as on the card" required>
</li>
</ol>
</fieldset>
<fieldset>
<button type=submit>Buy it!</button>
</fieldset>
</form>
Making things look nice
First things first, so let’s start by adding some defaults to our form by resetting the margins and paddings of the elements and adding a default font to the page:
html, body, h1, form, fieldset, legend, ol, li {
margin: 0;
padding: 0;
}
body {
background: #ffffff;
color: #111111;
font-family: Georgia, "Times New Roman", Times, serif;
padding: 20px;
}
Next we are going to style the form element that is wrapping our fields:
form#payment {
background: #9cbc2c;
-moz-border-radius: 5px;
-webkit-border-radius: 5px;
border-radius: 5px;
padding: 20px;
width: 400px;
}
We will also remove the border from the fieldset and apply some bottom margin to it. Using the :last-of-type pseudo-class, we remove the bottom margin of the last fieldset — there is no need for it:
form#payment fieldset {
border: none;
margin-bottom: 10px;
}
form#payment fieldset:last-of-type {
margin-bottom: 0;
}
Next we’ll make the legends big and bold, and we will also apply a light-green text-shadow, to add that little extra special detail:
form#payment legend {
color: #384313;
font-size: 16px;
font-weight: bold;
padding-bottom: 10px;
text-shadow: 0 1px 1px #c0d576;
}
Our legends are looking great, but how about adding a clear indication of how many steps our form has? Instead of adding that manually to every legend, we can use automatically generated counters.
To add a counter to an element, we have to use either the :before or :after pseudo-elements to add content via CSS. We will follow these steps:
create a counter using the counter-reset property on the form element
call the counter with the content property (using the same name we’ve created before)
with the counter-incremet property, indicate that for each element that matches our selector, that counter will be increased by 1
form#payment > fieldset > legend:before {
content: "Step " counter(fieldsets) ": ";
counter-increment: fieldsets;
}
Finally, we need to change the style of the legend that is part of the radio buttons group, to make it look like a label:
form#payment fieldset fieldset legend {
color: #111111;
font-size: 13px;
font-weight: normal;
padding-bottom: 0;
}
Styling the lists
For our list elements, we’ll just add some nice rounded corners and semi-transparent border and background. Because we are using RGBa colors, we should provide a fallback for browsers that don’t support them (that comes before the RBGa color). For the nested lists, we will remove these properties because they would be overlapping:
form#payment ol li {
background: #b9cf6a;
background: rgba(255,255,255,.3);
border-color: #e3ebc3;
border-color: rgba(255,255,255,.6);
border-style: solid;
border-width: 2px;
-moz-border-radius: 5px;
-webkit-border-radius: 5px;
border-radius: 5px;
line-height: 30px;
list-style: none;
padding: 5px 10px;
margin-bottom: 2px;
}
form#payment ol ol li {
background: none;
border: none;
float: left;
}
Form controls
Now we only need to style our labels, inputs and the button element.
All our labels will look the same, with the exception of the one for the radio elements. We will float them to the left and give them a width.
For the credit card type labels, we will add an icon as the background, and override some of the properties that aren’t necessary. We will be using the attribute selector to specify the background image for each label — in this case, we use the for attribute of each label.
To add an extra user-friendly detail, we’ll add a cursor: pointer to the radio button labels on the :hover state, so the user knows that he can simply click them to select that option.
form#payment label {
float: left;
font-size: 13px;
width: 110px;
}
form#payment fieldset fieldset label {
background:none no-repeat left 50%;
line-height: 20px;
padding: 0 0 0 30px;
width: auto;
}
form#payment label[for=visa] {
background-image: url(visa.gif);
}
form#payment label[for=amex] {
background-image: url(amex.gif);
}
form#payment label[for=mastercard] {
background-image: url(mastercard.gif);
}
form#payment fieldset fieldset label:hover {
cursor: pointer;
}
Almost there! Now onto the input elements. Here we want to match all inputs, except for the radio ones, and the textarea. For that we will use the negation pseudo-class (:not()). With it we can target all input elements except for the ones with type of radio.
We will also make sure to add some :focus styles and add the appropriate styling for the radio inputs:
form#payment input:not([type=radio]),
form#payment textarea {
background: #ffffff;
border: none;
-moz-border-radius: 3px;
-webkit-border-radius: 3px;
-khtml-border-radius: 3px;
border-radius: 3px;
font: italic 13px Georgia, "Times New Roman", Times, serif;
outline: none;
padding: 5px;
width: 200px;
}
form#payment input:not([type=submit]):focus,
form#payment textarea:focus {
background: #eaeaea;
}
form#payment input[type=radio] {
float: left;
margin-right: 5px;
}
And finally we come to our submit button. To it, we will just add some nice typography and text-shadow, align it to the center of the form and give it some background colors for its different states:
form#payment button {
background: #384313;
border: none;
-moz-border-radius: 20px;
-webkit-border-radius: 20px;
-khtml-border-radius: 20px;
border-radius: 20px;
color: #ffffff;
display: block;
font: 18px Georgia, "Times New Roman", Times, serif;
letter-spacing: 1px;
margin: auto;
padding: 7px 25px;
text-shadow: 0 1px 1px #000000;
text-transform: uppercase;
}
form#payment button:hover {
background: #1e2506;
cursor: pointer;
}
And that’s it! See the completed form.
This form will not look the same on every browser. Internet Explorer and Opera don’t support border-radius (at least not for now); the new input types are rendered as just normal inputs on some browsers; and some of the most advanced CSS, like the counter, :last-of-type or text-shadow are not supported on some browsers. But that doesn’t mean you can’t use them right now, and simplify your development process. My gift to you! |
2009 |
Inayaili de León Persson |
inayailideleon |
2009-12-03T00:00:00+00:00 |
https://24ways.org/2009/have-a-field-day-with-html5-forms/ |
code |
| 180 |
Going Nuts with CSS Transitions |
I’m going to show you how CSS 3 transforms and WebKit transitions can add zing to the way you present images on your site.
Laying the foundations
First we are going to make our images look like mini polaroids with captions. Here’s the markup:
<div class="polaroid pull-right">
<img src="../img/seal.jpg" alt="">
<p class="caption">Found this little cutie on a walk in New Zealand!</p>
</div>
You’ll notice we’re using a somewhat presentational class of pull-right here. This means the logic is kept separate from the code that applies the polaroid effect. The polaroid class has no positioning, which allows it to be used generically anywhere that the effect is required. The pull classes set a float and add appropriate margins—they can be used for things like blockquotes as well.
.polaroid {
width: 150px;
padding: 10px 10px 20px 10px;
border: 1px solid #BFBFBF;
background-color: white;
-webkit-box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4);
-moz-box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4);
box-shadow: 2px 2px 3px rgba(135, 139, 144, 0.4);
}
The actual polaroid effect itself is simply applied using padding, a border and a background colour. We also apply a nice subtle box shadow, using a property that is supported by modern WebKit browsers and Firefox 3.5+. We include the box-shadow property last to ensure that future browsers that support the eventual CSS3 specified version natively will use that implementation over the legacy browser specific version.
The box-shadow property takes four values: three lengths and a colour. The first is the horizontal offset of the shadow—positive values place the shadow on the right, while negative values place it to the left. The second is the vertical offset, positive meaning below. If both of these are set to 0, the shadow is positioned equally on all four sides. The last length value sets the blur radius—the larger the number, the blurrier the shadow (therefore the darker you need to make the colour to have an effect).
The colour value can be given in any format recognised by CSS. Here, we’re using rgba as explained by Drew behind the first door of this year’s calendar.
Rotation
For browsers that understand it (currently our old favourites WebKit and FF3.5+) we can add some visual flair by rotating the image, using the transform CSS 3 property.
-webkit-transform: rotate(9deg);
-moz-transform: rotate(9deg);
transform: rotate(9deg);
Rotations can be specified in degrees, radians (rads) or grads. WebKit also supports turns unfortunately Firefox doesn’t just yet.
For our example, we want any polaroid images on the left hand side to be rotated in the opposite direction, using a negative degree value:
.pull-left.polaroid {
-webkit-transform: rotate(-9deg);
-moz-transform: rotate(-9deg);
transform: rotate(-9deg);
}
Multiple class selectors don’t work in IE6 but as luck would have it, the transform property doesn’t work in any current IE version either. The above code is a good example of progressive enrichment: browsers that don’t support box-shadow or transform will still see the image and basic polaroid effect.
Animation
WebKit is unique amongst browser rendering engines in that it allows animation to be specified in pure CSS. Although this may never actually make it in to the CSS 3 specification, it degrades nicely and more importantly is an awful lot of fun!
Let’s go nuts.
In the next demo, the image is contained within a link and mousing over that link causes the polaroid to animate from being angled to being straight.
Here’s our new markup:
<a href="http://www.flickr.com/photos/nataliedowne/2340993237/" class="polaroid">
<img src="../img/raft.jpg" alt="">
White water rafting in Queenstown
</a>
And here are the relevant lines of CSS:
a.polaroid {
/* ... */
-webkit-transform: rotate(10deg);
-webkit-transition: -webkit-transform 0.5s ease-in;
}
a.polaroid:hover,
a.polaroid:focus,
a.polaroid:active {
/* ... */
-webkit-transform: rotate(0deg);
}
The @-webkit-transition@ property is the magic wand that sets up the animation. It takes three values: the property to be animated, the duration of the animation and a ‘timing function’ (which affects the animation’s acceleration, for a smoother effect).
-webkit-transition only takes affect when the specified property changes. In pure CSS, this is done using dynamic pseudo-classes. You can also change the properties using JavaScript, but that’s a story for another time.
Throwing polaroids at a table
Imagine there are lots of differently sized polaroid photos scattered on a table. That’s the effect we are aiming for with our next demo.
As an aside: we are using absolute positioning to arrange the images inside a flexible width container (with a minimum and maximum width specified in pixels). As some are positioned from the left and some from the right when you resize the browser they shuffle underneath each other. This is an effect used on the UX London site.
This demo uses a darker colour shadow with more transparency than before. The grey shadow in the previous example worked fine, but it was against a solid background. Since the images are now overlapping each other, the more opaque shadow looked fake.
-webkit-box-shadow: 2px 2px 4px rgba(0,0, 0, 0.3);
-moz-box-shadow: 2px 2px 4px rgba(0,0, 0, 0.3);
box-shadow: 2px 2px 4px rgba(0,0, 0, 0.3);
On hover, as well as our previous trick of animating the image rotation back to straight, we are also making the shadow darker and setting the z-index to be higher than the other images so that it appears on top.
And Finally…
Finally, for a bit more fun, we’re going to simulate the images coming towards you and lifting off the page. We’ll achieve this by making them grow larger and by offsetting the shadow & making it longer.
Screenshot 1 shows the default state, while 2 shows our previous hover effect. Screenshot 3 is the effect we are aiming for, illustrated by demo 4.
a.polaroid {
/* ... */
z-index: 2;
-webkit-box-shadow: 2px 2px 4px rgba(0,0, 0, 0.3);
-moz-box-shadow: 2px 2px 4px rgba(0,0, 0, 0.3);
box-shadow: 2px 2px 4px rgba(0,0, 0, 0.3);
-webkit-transform: rotate(10deg);
-moz-transform: rotate(10deg);
transform: rotate(10deg);
-webkit-transition: all 0.5s ease-in;
}
a.polaroid:hover,
a.polaroid:focus,
a.polaroid:active {
z-index: 999;
border-color: #6A6A6A;
-webkit-box-shadow: 15px 15px 20px rgba(0,0, 0, 0.4);
-moz-box-shadow: 15px 15px 20px rgba(0,0, 0, 0.4);
box-shadow: 15px 15px 20px rgba(0,0, 0, 0.4);
-webkit-transform: rotate(0deg) scale(1.05);
-moz-transform: rotate(0deg) scale(1.05);
transform: rotate(0deg) scale(1.05);
}
You’ll notice we are now giving the transform property another transform function: scale, which takes increases the size by the specified factor. Other things you can do with transform include skewing, translating or you can go mad creating your own transforms with a matrix.
The box-shadow has both its offset and blur radius increased dramatically, and is darkened using the alpha channel of the rgba colour.
And because we want the effects to all animate smoothly, we pass a value of all to the -webkit-transition property, ensuring that any changed property on that link will be animated.
Demo 5 is the finished example, bringing everything nicely together.
CSS transitions and transforms are a great example of progressive enrichment, which means improving the experience for a portion of the audience without negatively affecting other users. They are also a lot of fun to play with!
Further reading
-moz-transform – the mozilla developer center has a comprehensive explanation of transform that also applies to -webkit-transform and transform.
CSS: Animation Using CSS Transforms – this is a good, more indepth tutorial on animations.
CSS Animation – the Safari blog explains the usage of -webkit-transform.
Dinky pocketbooks with transform – another use for transforms, create your own printable pocketbook.
A while back, Simon wrote a little bookmarklet to spin the entire page… warning: this will spin the entire page. |
2009 |
Natalie Downe |
nataliedowne |
2009-12-14T00:00:00+00:00 |
https://24ways.org/2009/going-nuts-with-css-transitions/ |
code |
| 181 |
Working With RGBA Colour |
When Tim and I were discussing the redesign of this site last year, one of the clear goals was to have a graphical style without making the pages heavy with a lot of images. When we launched, a lot of people were surprised that the design wasn’t built with PNGs. Instead we’d used RGBA colour values, which is part of the CSS3 specification.
What is RGBA Colour?
We’re all familiar with specifying colours in CSS using by defining the mix of red, green and blue light required to achieve our tone. This is fine and dandy, but whatever values we specify have one thing in common — the colours are all solid, flat, and well, a bit boring.
Flat RGB colours
CSS3 introduces a couple of new ways to specify colours, and one of those is RGBA. The A stands for Alpha, which refers to the level of opacity of the colour, or to put it another way, the amount of transparency. This means that we can set not only the red, green and blue values, but also control how much of what’s behind the colour shows through. Like with layers in Photoshop.
Don’t We Have Opacity Already?
The ability to set the opacity on a colour differs subtly from setting the opacity on an element using the CSS opacity property. Let’s look at an example.
Here we have an H1 with foreground and background colours set against a page with a patterned background.
Heading with no transparency applied
h1 {
color: rgb(0, 0, 0);
background-color: rgb(255, 255, 255);
}
By setting the CSS opacity property, we can adjust the transparency of the entire element and its contents:
Heading with 50% opacity on the element
h1 {
color: rgb(0, 0, 0);
background-color: rgb(255, 255, 255);
opacity: 0.5;
}
RGBA colour gives us something different – the ability to control the opacity of the individual colours rather than the entire element. So we can set the opacity on just the background:
50% opacity on just the background colour
h1 {
color: rgb(0, 0, 0);
background-color: rgba(255, 255, 255, 0.5);
}
Or leave the background solid and change the opacity on just the text:
50% opacity on just the foreground colour
h1 {
color: rgba(0, 0, 0, 0.5);
background-color: rgb(255, 255, 255);
}
The How-To
You’ll notice that above I’ve been using the rgb() syntax for specifying colours. This is a bit less common than the usual hex codes (like #FFF) but it makes sense when starting to use RGBA. As there’s no way to specify opacity with hex codes, we use rgba() like so:
color: rgba(255, 255, 255, 0.5);
Just like rgb() the first three values are red, green and blue. You can specify these 0-255 or 0%-100%. The fourth value is the opacity level from 0 (completely transparent) to 1 (completely opaque).
You can use this anywhere you’d normally set a colour in CSS — so it’s good for foregrounds and background, borders, outlines and so on. All the transparency effects on this site’s current design are achieved this way.
Supporting All Browsers
Like a lot of the features we’ll be looking at in this year’s 24 ways, RGBA colour is supported by a lot of the newest browsers, but not the rest. Firefox, Safari, Chrome and Opera browsers all support RGBA, but Internet Explorer does not.
Fortunately, due to the robust design of CSS as a language, we can specify RGBA colours for browsers that support it and an alternative for browsers that do not.
Falling back to solid colour
The simplest technique is to allow the browser to fall back to using a solid colour when opacity isn’t available. The CSS parsing rules specify that any unrecognised value should be ignored. We can make use of this because a browser without RGBA support will treat a colour value specified with rgba() as unrecognised and discard it.
So if we specify the colour first using rgb() for all browsers, we can then overwrite it with an rgba() colour for browsers that understand RGBA.
h1 {
color: rgb(127, 127, 127);
color: rgba(0, 0, 0, 0.5);
}
Falling back to a PNG
In cases where you’re using transparency on a background-color (although not on borders or text) it’s possible to fall back to using a PNG with alpha channel to get the same effect. This is less flexible than using CSS as you’ll need to create a new PNG for each level of transparency required, but it can be a useful solution.
Using the same principal as before, we can specify the background in a style that all browsers will understand, and then overwrite it in a way that browsers without RGBA support will ignore.
h1 {
background: transparent url(black50.png);
background: rgba(0, 0, 0, 0.5) none;
}
It’s important to note that this works because we’re using the background shorthand property, enabling us to set both the background colour and background image in a single declaration. It’s this that enables us to rely on the browser ignoring the second declaration when it encounters the unknown rgba() value.
Next Steps
The really great thing about RGBA colour is that it gives us the ability to create far more graphically rich designs without the need to use images. Not only does that make for faster and lighter pages, but sites which are easier and quicker to build and maintain. CSS values can also be changed in response to user interaction or even manipulated with JavaScript in a way that’s just not so easy using images.
Opacity can be changed on :hover or manipulated with JavaScript
div {
color: rgba(255, 255, 255, 0.8);
background-color: rgba(142, 213, 87, 0.3);
}
div:hover {
color: rgba(255, 255, 255, 1);
background-color: rgba(142, 213, 87, 0.6);
}
Clever use of transparency in border colours can help ease the transition between overlay items and the page behind.
Borders can receive the RGBA treatment, too
div {
color: rgb(0, 0, 0);
background-color: rgb(255, 255, 255);
border: 10px solid rgba(255, 255, 255, 0.3);
}
In Conclusion
That’s a brief insight into RGBA colour, what it’s good for and how it can be used whilst providing support for older browsers. With the current lack of support in Internet Explorer, it’s probably not a technique that commercial designs will want to heavily rely on right away – simply because of the overhead of needing to think about fallback all the time.
It is, however, a useful tool to have for those smaller, less critical touches that can really help to finesse a design. As browser support becomes more mainstream, you’ll already be familiar and practised with RGBA and ready to go. |
2009 |
Drew McLellan |
drewmclellan |
2009-12-01T00:00:00+00:00 |
https://24ways.org/2009/working-with-rgba-colour/ |
code |
| 182 |
Breaking Out The Edges of The Browser |
HTML5 contains more than just the new entities for a more meaningful document, it also contains an arsenal of JavaScript APIs. So many in fact, that some APIs have outgrown the HTML5 spec’s backyard and have been sent away to grow up all on their own and been given the prestigious honour of being specs in their own right.
So when I refer to (bendy finger quote) “HTML5”, I mean the HTML5 specification and a handful of other specifications that help us authors build web applications.
Examples of those specs I would include in the umbrella term would be: geolocation, web storage, web databases, web sockets and web workers, to name a few.
For all you guys and gals, on this special 2009 series of 24 ways, I’m just going to focus on data storage and offline applications: boldly taking your browser where no browser has gone before!
Web Storage
The Web Storage API is basically cookies on steroids, a unhealthy dosage of steroids. Cookies are always a pain to work with. First of all you have the problem of setting, changing and deleting them. Typically solved by Googling and blindly relying on PPK’s solution. If that wasn’t enough, there’s the 4Kb limit that some of you have hit when you really don’t want to.
The Web Storage API gets around all of the hoops you have to jump through with cookies. Storage supports around 5Mb of data per domain (the spec’s recommendation, but it’s open to the browsers to implement anything they like) and splits in to two types of storage objects:
sessionStorage – available to all pages on that domain while the window remains open
localStorage – available on the domain until manually removed
Support
Ignoring beta browsers for our support list, below is a list of the major browsers and their support for the Web Storage API:
Latest: Internet Explorer, Firefox, Safari (desktop & mobile/iPhone)
Partial: Google Chrome (only supports localStorage)
Not supported: Opera (as of 10.10)
Usage
Both sessionStorage and localStorage support the same interface for accessing their contents, so for these examples I’ll use localStorage.
The storage interface includes the following methods:
setItem(key, value)
getItem(key)
key(index)
removeItem(key)
clear()
In the simple example below, we’ll use setItem and getItem to store and retrieve data:
localStorage.setItem('name', 'Remy');
alert( localStorage.getItem('name') );
Using alert boxes can be a pretty lame way of debugging. Conveniently Safari (and Chrome) include database tab in their debugging tools (cmd+alt+i), so you can get a visual handle on the state of your data:
Viewing localStorage
As far as I know only Safari has this view on stored data natively in the browser. There may be a Firefox plugin (but I’ve not found it yet!) and IE… well that’s just IE.
Even though we’ve used setItem and getItem, there’s also a few other ways you can set and access the data.
In the example below, we’re accessing the stored value directly using an expando and equally, you can also set values this way:
localStorage.name = "Remy";
alert( localStorage.name ); // shows "Remy"
The Web Storage API also has a key method, which is zero based, and returns the key in which data has been stored. This should also be in the same order that you set the keys, for example:
alert( localStorage.getItem(localStorage.key(0)) );
// shows "Remy"
I mention the key() method because it’s not an unlikely name for a stored value. This can cause serious problems though.
When selecting the names for your keys, you need to be sure you don’t take one of the method names that are already on the storage object, like key, clear, etc. As there are no warnings when you try to overwrite the methods, it means when you come to access the key() method, the call breaks as key is a string value and not a function.
You can try this yourself by creating a new stored value using localStorage.key = "foo" and you’ll see that the Safari debugger breaks because it relies on the key() method to enumerate each of the stored values.
Usage Notes
Currently all browsers only support storing strings. This also means if you store a numeric, it will get converted to a string:
localStorage.setItem('count', 31);
alert(typeof localStorage.getItem('count'));
// shows "string"
This also means you can’t store more complicated objects natively with the storage objects. To get around this, you can use Douglas Crockford’s JSON parser (though Firefox 3.5 has JSON parsing support baked in to the browser – yay!) json2.js to convert the object to a stringified JSON object:
var person = {
name: 'Remy',
height: 'short',
location: 'Brighton, UK'
};
localStorage.setItem('person', JSON.stringify(person));
alert( JSON.parse(localStorage.getItem('person')).name );
// shows "Remy"
Alternatives
There are a few solutions out there that provide storage solutions that detect the Web Storage API, and if it’s not available, fall back to different technologies (for instance, using a flash object to store data). One comprehensive version of this is Dojo’s storage library. I’m personally more of a fan of libraries that plug missing functionality under the same namespace, just as Crockford’s JSON parser does (above).
For those interested it what that might look like, I’ve mocked together a simple implementation of sessionStorage. Note that it’s incomplete (because it’s missing the key method), and it could be refactored to not using the JSON stringify (but you would need to ensure that the values were properly and safely encoded):
// requires json2.js for all browsers other than Firefox 3.5
if (!window.sessionStorage && JSON) {
window.sessionStorage = (function () {
// window.top.name ensures top level, and supports around 2Mb
var data = window.top.name ? JSON.parse(window.top.name) : {};
return {
setItem: function (key, value) {
data[key] = value+""; // force to string
window.top.name = JSON.stringify(data);
},
removeItem: function (key) {
delete data[key];
window.top.name = JSON.stringify(data);
},
getItem: function (key) {
return data[key] || null;
},
clear: function () {
data = {};
window.top.name = '';
}
};
})();
}
Now that we’ve cracked the cookie jar with our oversized Web Storage API, let’s have a look at how we take our applications offline entirely.
Offline Applications
Offline applications is (still) part of the HTML5 specification. It allows developers to build a web app and have it still function without an internet connection. The app is access via the same URL as it would be if the user were online, but the contents (or what the developer specifies) is served up to the browser from a local cache. From there it’s just an everyday stroll through open web technologies, i.e. you still have access to the Web Storage API and anything else you can do without a web connection.
For this section, I’ll refer you to a prototype demo I wrote recently of a contrived Rubik’s cube (contrived because it doesn’t work and it only works in Safari because I’m using 3D transforms).
Offline Rubik’s cube
Support
Support for offline applications is still fairly limited, but the possibilities of offline applications is pretty exciting, particularly as we’re seeing mobile support and support in applications such as Fluid (and I would expect other render engine wrapping apps).
Support currently, is as follows:
Latest: Safari (desktop & mobile/iPhone)
Sort of: Firefox‡
Not supported: Internet Explorer, Opera, Google Chrome
‡ Firefox 3.5 was released to include offline support, but in fact has bugs where it doesn’t work properly (certainly on the Mac), Minefield (Firefox beta) has resolved the bug.
Usage
The status of the application’s cache can be tested from the window.applicationCache object. However, we’ll first look at how to enable your app for offline access.
You need to create a manifest file, which will tell the browser what to cache, and then we point our web page to that cache:
<!DOCTYPE html>
<html manifest="remy.manifest">
<!-- continues ... -->
For the manifest to be properly read by the browser, your server needs to serve the .manifest files as text/manifest by adding the following to your mime.types:
text/cache-manifest manifest
Next we need to populate our manifest file so the browser can read it:
CACHE MANIFEST
/demo/rubiks/index.html
/demo/rubiks/style.css
/demo/rubiks/jquery.min.js
/demo/rubiks/rubiks.js
# version 15
The first line of the manifest must read CACHE MANIFEST. Then subsequent lines tell the browser what to cache.
The HTML5 spec recommends that you include the calling web page (in my case index.html), but it’s not required. If I didn’t include index.html, the browser would cache it as part of the offline resources.
These resources are implicitly under the CACHE namespace (which you can specify any number of times if you want to).
In addition, there are two further namespaces: NETWORK and FALLBACK.
NETWORK is a whitelist namespace that tells the browser not to cache this resource and always try to request it through the network.
FALLBACK tells the browser that whilst in offline mode, if the resource isn’t available, it should return the fallback resource.
Finally, in my example I’ve included a comment with a version number. This is because once you include a manifest, the only way you can tell the browser to reload the resources is if the manifest contents changes. So I’ve included a version number in the manifest which I can change forcing the browser to reload all of the assets.
How it works
If you’re building an app that makes use of the offline cache, I would strongly recommend that you add the manifest last. The browser implementations are very new, so can sometimes get a bit tricky to debug since once the resources are cached, they really stick in the browser.
These are the steps that happen during a request for an app with a manifest:
Browser: sends request for your app.html
Server: serves all associated resources with app.html – as normal
Browser: notices that app.html has a manifest, it re-request the assets in the manifest
Server: serves the requested manifest assets (again)
Browser: window.applicationCache has a status of UPDATEREADY
Browser: reloads
Browser: only request manifest file (which doesn’t show on the net requests panel)
Server: responds with 304 Not Modified on the manifest file
Browser: serves all the cached resources locally
What might also add confusion to this process, is that the way the browsers work (currently) is if there is a cache already in place, it will use this first over updated resources. So if your manifest has changed, the browser will have already loaded the offline cache, so the user will only see the updated on the next reload.
This may seem a bit convoluted, but you can also trigger some of this manually through the applicationCache methods which can ease some of this pain.
If you bind to the online event you can manually try to update the offline cache. If the cache has then updated, swap the updated resources in to the cache and the next time the app loads it will be up to date. You could also prompt your user to reload the app (which is just a refresh) if there’s an update available.
For example (though this is just pseudo code):
addEvent(applicationCache, 'updateready', function () {
applicationCache.swapCache();
tellUserToRefresh();
});
addEvent(window, 'online', function () {
applicationCache.update();
});
Breaking out of the Browser
So that’s two different technologies that you can use to break out of the traditional browser/web page model and get your apps working in a more application-ny way.
There’s loads more in the HTML5 and non-HTML5 APIs to play with, so take your Christmas break to check them out! |
2009 |
Remy Sharp |
remysharp |
2009-12-02T00:00:00+00:00 |
https://24ways.org/2009/breaking-out-the-edges-of-the-browser/ |
code |
| 184 |
Spruce It Up |
The landscape of web typography is changing quickly these days. We’ve gone from the wild west days of sIFR to Cufón to finally seeing font embedding seeing wide spread adoption by browser developers (and soon web designers) with @font-face. For those who’ve felt limited by the typographic possibilities before, this has been a good year.
As Mark Boulton has so eloquently elucidated, @font-face embedding doesn’t come without its drawbacks. Font files can be quite large and FOUT—that nasty flash of unstyled text—can be a distraction for users.
Data URIs
We can battle FOUT by using Data URIs. A Data URI allows the font to be encoded right into the CSS file. When the font comes with the CSS, the flash of unstyled text is mitigated. No extra HTTP requests are required.
Don’t be a grinch, though. Sending hundreds of kilobytes down the pipe still isn’t great. Sometimes, all we want to do is spruce up our site with a little typographic sugar.
Be Selective
Dan Cederholm’s SimpleBits is an attractive site.
Take a look at the ampersand within the header of his site. It’s the lovely (and free) Goudy Bookletter 1911 available from The League of Movable Type. The Opentype format is a respectable 28KB. Nothing too crazy but hold on here. Mr. Cederholm is only using the ampersand! Ouch. That’s a lot of bandwidth just for one character.
Can we optimize a font like we can an image? Yes. Image optimization essentially works by removing unnecessary image data such as colour data, hidden comments or using compression algorithms. How do you remove unnecessary information from a font? Subsetting.
If you’re the adventurous type, grab a copy of FontForge, which is an open source font editing tool. You can open the font, view and edit any of the glyphs and then re-generate the font. The interface is a little clunky but you’ll be able to select any character you don’t want and then cut the glyphs. Re-generate your font and you’ve now got a smaller file.
There are certainly more optimizations that can also be made such as removing hinting and kerning information. Keep in mind that removing this information may affect how well the type renders.
At this time of year, though, I’m sure you’re quite busy. Save yourself some time and head on over to the Font Squirrel Font Generator.
The Font Generator is extremely handy and allows for a number of optimizations and cross-platform options to be generated instantly. Select the font from your local system—make sure that you are only using properly licensed fonts!
In this particular case, we only want the ampersand. Click on Subset Fonts which will open up a new menu. Unselect any preselected sets and enter the ampersand into the Single Characters text box.
Generate your font and what are you left with? 3KB.
The Font Generator even generates a base64 encoded data URI stylesheet to be imported easily into your project.
Check out the Demo page. (This demo won’t work in Internet Explorer as we’re only demonstrating the Data URI font embedding and not using the EOT file format that IE requires.)
No Unnecessary Additives
If you peeked under the hood of that demo, did you notice something interesting? There’s no <span> around the ampersand. The great thing about this is that we can take advantage of the font stack’s natural ability to switch to a fallback font when a character isn’t available.
Just like that, we’ve managed to spruce up our page with a little typographic sugar without having to put on too much weight. |
2009 |
Jonathan Snook |
jonathansnook |
2009-12-19T00:00:00+00:00 |
https://24ways.org/2009/spruce-it-up/ |
code |
| 186 |
The Web Is Your CMS |
It is amazing what you can do these days with the services offered on the web. Flickr stores terabytes of photos for us and converts them automatically to all kind of sizes, finds people in them and even allows us to edit them online. YouTube does almost the same complete job with videos, LinkedIn allows us to maintain our CV, Delicious our bookmarks and so on.
We don’t have to do these tasks ourselves any more, as all of these systems also come with ways to use the data in the form of Application Programming Interfaces, or APIs for short. APIs give us raw data when we send requests telling the system what we want to get back.
The problem is that every API has a different idea of what is a simple way of accessing this data and in which format to give it back.
Making it easier to access APIs
What we need is a way to abstract the pains of different data formats and authentication formats away from the developer — and this is the purpose of the Yahoo Query Language, or YQL for short.
Libraries like jQuery and YUI make it easy and reliable to use JavaScript in browsers (yes, even IE6) and YQL allows us to access web services and even the data embedded in web documents in a simple fashion – SQL style.
Select * from the web and filter it the way I want
YQL is a web service that takes a few inputs itself:
A query that tells it what to get, update or access
An output format – XML, JSON, JSON-P or JSON-P-X
A callback function (if you defined JSON-P or JSON-P-X)
You can try it out yourself – check out this link to get back Flickr photos for the search term ‘santa’*%20from%20flickr.photos.search%20where%20text%3D%22santa%22&format=xml in XML format. The YQL query for this is
select * from flickr.photos.search where text="santa"
The easiest way to take your first steps with YQL is to look at the console. There you get sample queries, access to all the data sources available to you and you can easily put together complex queries. In this article, however, let’s use PHP to put together a web page that pulls in Flickr photos, blog posts, Videos from YouTube and latest bookmarks from Delicious.
Check out the demo and get the source code on GitHub.
<?php
/* YouTube RSS */
$query = 'select description from rss(5) where url="http://gdata.youtube.com/feeds/base/users/chrisheilmann/uploads?alt=rss&v=2&orderby=published&client=ytapi-youtube-profile";';
/* Flickr search by user id */
$query .= 'select farm,id,owner,secret,server,title from flickr.photos.search where user_id="11414938@N00";';
/* Delicious RSS */
$query .= 'select title,link from rss where url="http://feeds.delicious.com/v2/rss/codepo8?count=10";';
/* Blog RSS */
$query .= 'select title,link from rss where url="http://feeds.feedburner.com/wait-till-i/gwZf"';
/* The YQL web service root with JSON as the output */
$root = 'http://query.yahooapis.com/v1/public/yql?format=json&env=store%3A%2F%2Fdatatables.org%2Falltableswithkeys';
/* Assemble the query */
$query = "select * from query.multi where queries='".$query."'";
$url = $root . '&q=' . urlencode($query);
/* Do the curl call (access the data just like a browser would) */
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, false);
$output = curl_exec($ch);
curl_close($ch);
$data = json_decode($output);
$results = $data->query->results->results;
/* YouTube output */
$youtube = '<ul id="youtube">';
foreach($results[0]->item as $r){
$cleanHTML = undoYouTubeMarkupCrimes($r->description);
$youtube .= '<li>'.$cleanHTML.'</li>';
}
$youtube .= '</ul>';
/* Flickr output */
$flickr = '<ul id="flickr">';
foreach($results[1]->photo as $r){
$flickr .= '<li>'.
'<a href="http://www.flickr.com/photos/codepo8/'.$r->id.'/">'.
'<img src="http://farm' .$r->farm . '.static.flickr.com/'.
$r->server . '/' . $r->id . '_' . $r->secret .
'_s.jpg" alt="'.$r->title.'"></a></li>';
}
$flickr .= '</ul>';
/* Delicious output */
$delicious = '<ul id="delicious">';
foreach($results[2]->item as $r){
$delicious .= '<li><a href="'.$r->link.'">'.$r->title.'</a></li>';
}
$delicious .= '</ul>';
/* Blog output */
$blog = '<ul id="blog">';
foreach($results[3]->item as $r){
$blog .= '<li><a href="'.$r->link.'">'.$r->title.'</a></li>';
}
$blog .= '</ul>';
function undoYouTubeMarkupCrimes($str){
$cleaner = preg_replace('/555px/','100%',$str);
$cleaner = preg_replace('/width="[^"]+"/','',$cleaner);
$cleaner = preg_replace('/<tbody>/','<colgroup><col width="20%"><col width="50%"><col width="30%"></colgroup><tbody>',$cleaner);
return $cleaner;
}
?>
What we are doing here is create a few different YQL statements and queue them together with the query.multi table. Each of these can be run inside YQL itself. Check out the YouTube, Flickr, Delicious and Blog example in the console if you don’t believe me. The benefit of using this table is that we don’t make individual requests for each query but we get all the data in one single request – which means a much better performing solution as the YQL server farm is faster on the web than our servers.
We point the query to the YQL web service end point and get the resulting data using cURL. All that we need to do then is to convert the returned data to HTML lists that can be printed out inside an HTML template.
Mixing, matching and using HTML as a data source
This was a simple example of what YQL can do for you. Where it gets really powerful however is by mixing and matching different APIs. YQL is also a good tool to get information from HTML documents. By using the html table you can load the content of an HTML document (which gets fixed automatically by HTMLTidy) and use XPATH to filter down results to what you need. Take the following example which takes headlines from the news.bbc.co.uk homepage and runs the results through Yahoo’s Term Extractor API to give you a list of currently hot topics.
select * from search.termextract where context in (
select content from html where url="http://news.bbc.co.uk" and xpath="//table[@width=800]//a"
)
Try it out in the console or see the results here. In English, this means:
Go to http://news.bbc.co.uk and get me the HTML
Run it through HTML Tidy to clean it up.
Get me only the links inside the table with an attribute of width and the value 800
Get only the content of the link and for each of the links
Take the content and send it as context to the Yahoo Term Extractor API
If we choose JSON-P as the output format we can use the outcome directly in JavaScript (see this demo or see its source):
<ul id="hottopics"></ul>
<script type="text/javascript">
function hottopics(o){
var res = o.query.results.Result,
all = res.length,
topics = {},
out = [],
html = '',
i=0;
/* create hash from topics to prevent repetition */
for(i=0;i<all;i++){
topics[res[i]] = res[i];
};
for(i in topics){
out.push(i);
};
html = '<li>' + out.join('</li><li>') + '</li>';
document.getElementById('hottopics').innerHTML = html;
};
</script>
<script type="text/javascript" src="http://query.yahooapis.com/v1/public/yql?q=select%20content%20from%20search.termextract%20where %20context%20in%20(select%20content%20from%20html%20where%20url%3D%22http%3A%2F%2Fnews.bbc.co.uk%22%20and%20xpath%3D%22%2F%2Ftable%5B%40width%3D800%5D%2F%2Fa%22)&format=json&callback=hottopics"></script>
Using JSON, we can also use PHP which means the demo works for everybody – not only those with JavaScript enabled (see this demo or see its source):
<ul id="hottopics"><li>
<?php
$url = 'http://query.yahooapis.com/v1/public/yql?q=select%20content'.
'%20from%20search.termextract%20where%20context%20in'.
'%20(select%20content%20from%20html%20where%20url%3D%22'.
'http%3A%2F%2Fnews.bbc.co.uk%22%20and%20xpath%3D%22%2F%2F'.
'table%5B%40width%3D800%5D%2F%2Fa%22)&format=json';
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, false);
$output = curl_exec($ch);
curl_close($ch);
$data = json_decode($output);
$topics = array_unique($data->query->results->Result);
echo join('</li><li>',$topics);
?>
</li></ul>
Summary
This article could only scratch the surface of YQL. You have not only read access to the web but you can also write to web services. For example you can update Twitter, post to your WordPress blog or shorten a URL with bit.ly. Using Open Tables you can add any web service to the YQL interface and you can even run server-side JavaScript which is for example useful to return Flickr photos as HTML or get the HTML content from a document that needs POST data.
The web of data is already here, and using YQL you don’t have to be a web services expert to use it and be part of it. |
2009 |
Christian Heilmann |
chrisheilmann |
2009-12-17T00:00:00+00:00 |
https://24ways.org/2009/the-web-is-your-cms/ |
code |
| 188 |
Don't Lose Your :focus |
For many web designers, accessibility conjures up images of blind users with screenreaders, and the difficulties in making sites accessible to this particular audience. Of course, accessibility covers a wide range of situations that go beyond the extreme example of screenreader users. And while it’s true that making a complex site accessible can often be a daunting prospect, there are also many small things that don’t take anything more than a bit of judicious planning, are very easy to test (without having to buy expensive assistive technology), and can make all the difference to certain user groups.
In this short article we’ll focus on keyboard accessibility and how careless use of CSS can potentially make your sites completely unusable.
Keyboard Access
Users who for whatever reason can’t use a mouse will employ a keyboard (or keyboard-like custom interface) to navigate around web pages. By default, they will use TAB and SHIFT + TAB to move from one focusable element (links, form controls and area) of a page to the next.
Note: in OS X, you’ll first need to turn on full keyboard access under System Preferences > Keyboard and Mouse > Keyboard Shortcuts. Safari under Windows needs to have the option Press Tab to highlight each item on a webpage in Preferences > Advanced enabled. Opera is the odd one out, as it has a variety of keyboard navigation options – the most relevant here being spatial navigation via Shift+Down, Shift+Up, Shift+Left, and Shift+Right).
But I Don’t Like Your Dotted Lines…
To show users where they are within a page, browsers place an outline around the element that currently has focus. The “problem” with these default outlines is that some browsers (Internet Explorer and Firefox) also display them when a user clicks on a focusable element with the mouse. Particularly on sites that make extensive use of image replacement on links with “off left” techniques this can create very unsightly outlines that stretch from the replaced element all the way to the left edge of the browser.
Outline bleeding off to the left (image-replacement example from carsonified.com)
There is a trivial workaround to prevent outlines from “spilling over” by adding a simple overflow:hidden, which keeps the outline in check around the clickable portion of the image-replaced element itself.
Outline tamed with overflow:hidden
But for many designers, even this is not enough. As a final solution, many actively suppress outlines altogether in their stylesheets. Controversially, even Eric Meyer’s popular reset.css – an otherwise excellent set of styles that levels the playing field of varying browser defaults – suppresses outlines.
html, body, div, span, applet, object, iframe ... {
...
outline: 0;
...
}
/* remember to define focus styles! */
:focus {
outline: 0;
}
Yes, in his explanation (and in the CSS itself) Eric does remind designers to define relevant styles for :focus… but judging by the number of sites that seem to ignore this (and often remove the related comment from the stylesheet altogether), the message doesn’t seem to have sunk in.
Anyway… hurrah! No more unsightly dotted lines on our lovely design. But what about keyboard users? Although technically they can still TAB from one element to the next, they now get no default cue as to where they are within the page (one notable exception here is Opera, where the outline is displayed regardless of stylesheets)… and if they’re Safari users, they won’t even get an indication of a link’s target in the status bar, like they would if they hovered over it with the mouse.
Only Suppress outline For Mouse Users
Is there a way to allow users navigating with the keyboard to retain the standard outline behaviour they’ve come to expect from their browser, while also ensuring that it doesn’t show display for mouse users?
Testing some convoluted style combinations
After playing with various approaches (see Better CSS outline suppression for more details), the most elegant solution also seemed to be the simplest: don’t remove the outline on :focus, do it on :active instead – after all, :active is the dynamic pseudo-class that deals explicitly with the styles that should be applied when a focusable element is clicked or otherwise activated.
a:active { outline: none; }
The only minor issues with this method: if a user activates a link and then uses the browser’s back button, the outline becomes visible. Oh, and old versions of Internet Explorer notoriously get confused by the exact meaning of :focus, :hover and :active, so this method fails in IE6 and below. Personally, I can live with both of these.
Note: at the last minute before submitting this article, I discovered a fatal flaw in my test. It appears that outline still manages to appear in the time between activating a link and the link target loading (which in hindsight is logical – after activation, the link does indeed receive focus). As my test page only used in-page links, this issue never came up before. The slightly less elegant solution is to also suppress the outline on :hover.
a:hover, a:active { outline: none; }
In Conclusion
Of course, many web designers may argue that they know what’s best, even for their keyboard-using audience. Maybe they’ve removed the default outline and are instead providing some carefully designed :focus styles. If they know for sure that these custom styles are indeed a reliable alternative for their users, more power to them… but, at the risk of sounding like Jakob “blue underlined links” Nielsen, I’d still argue that sometimes the default browser behaviours are best left alone. Complemented, yes (and if you’re already defining some fancy styles for :hover, by all means feel free to also make them display on :focus)… but not suppressed. |
2009 |
Patrick Lauke |
patricklauke |
2009-12-09T00:00:00+00:00 |
https://24ways.org/2009/dont-lose-your-focus/ |
code |
| 191 |
CSS Animations |
Friend: You should learn how to write CSS!
Me: …
Friend: CSS; Cascading Style Sheets. If you’re serious about web design, that’s the next thing you should learn.
Me: What’s wrong with <font> tags?
That was 8 years ago. Thanks to the hard work of Jeffrey, Andy, Andy, Cameron, Colly, Dan and many others, learning how to decently markup a website and write lightweight stylesheets was surprisingly easy. They made it so easy even a complete idiot (OH HAI) was able to quickly master it.
And then… nothing. For a long time, it seemed like there wasn’t happening anything in the land of CSS, time stood still. Once you knew the basics, there wasn’t anything new to keep up with. It looked like a great band split, but people just kept re-releasing their music in various “Best Of!” or “Remastered!” albums.
Fast forward a couple of years to late 2006. On the official WebKit blog Surfin’ Safari, there’s an article about something called CSS animations. Great new stuff to play with, but only supported by nightly builds (read: very, very beta) of WebKit. In the following months, they release other goodies, like CSS gradients, CSS reflections, CSS masks, and even more CSS animation sexiness. Whoa, looks like the band got back together, found their second youth, and went into overdrive! The problem was that if you wanted to listen to their new albums, you had to own some kind of new high-tech player no one on earth (besides some early adopters) owned.
Back in the time machine. It is now late 2009, close to Christmas. Things have changed. Browsers supporting these new toys are widely available left and right. Even non-techies are using these advanced browsers to surf the web on a daily basis!
Epic win? Almost, but at least this gives us enough reason to start learning how we could use all this new CSS voodoo. On Monday, Natalie Downe showed you a good tutorial on Going Nuts with CSS Transitions. Today, I’m taking it one step further…
Howto: A basic spinner
No matter how fast internet tubes or servers are, we’ll always need spinners to indicate something’s happening behind the scenes. Up until now, people would go to some site, pick one of the available templates, customize their foreground and background colors, and download a beautiful GIF image.
There are some downsides to this though:
It’s only _semi_-transparent: If you change your mind and pick a slightly different background color, you need to go back to the site, set all the parameters again, and replace your current image. There isn’t even a way to pick an image or gradient as background.
Limited number of frames, probable to keep the file-size as small as possible (don’t forget this thing needs to be loaded before whatever process is finished in the background), and you don’t have that 24 frames per second smoothness.
This is just too fucking easy. As a front-end code geek, there must be a “cooler” way to do this!
What do we need to make a spinner with CSS animations? One image, and one element on our webpage we can hook on to. Yes, that’s it. I created a simple transparent PNG that looks it might be a spinner, and for the element on the page, I wrote this piece of genius HTML:
<p id="spinner">Please wait while we do what we do best.</p>
Looks semantic enough to me! Here’s the basic HTML I’m using to position the element in the center of the screen, and make the text inside it disappear:
#spinner {
position: absolute;
top: 50%;
left: 50%;
margin: -100px 0 0 -100px;
height: 200px;
width: 200px;
text-indent: 250px;
white-space: nowrap;
overflow: hidden;
}
Cool, but now we don’t see anything. Let’s pull rabbit number one out of the hat: -webkit-mask-image (accompanied by the previously mentioned transparent PNG image):
#spinner {
...
-webkit-mask-image: url(../img/spinner.png);
}
By now you should be feeling like a magician already. Oh, wait, we still have a blank screen, looks like we left something in the hat (tip: not rabbit droppings):
#spinner {
...
-webkit-mask-image: url(../img/spinner.png);
background-color: #000;
}
Nice! What we’ve done right here is telling the element to clip onto the PNG. It’s a lot like clipping layers in Photoshop. So, spinners, they move, right? Into the hat again, and look what we pull out this time: CSS animations!
#spinner {
...
-webkit-mask-image: url(../img/spinner.png);
background-color: #000;
-webkit-animation-name: spinnerRotate;
-webkit-animation-duration: 2s;
-webkit-animation-iteration-count: infinite;
-webkit-animation-timing-function: linear;
}
Some explanation:
-webkit-animation-name: Name of the animation we’ll be defining later.
-webkit-animation-duration: The timespan of the animation.
-webkit-animation-iteration-count: Repeat once, a defined number of times or infinitely?
-webkit-animation-timing-function: Linear is the one you’ll be using mostly. Other options are ease-in, ease-out, ease-in-out…
Let’s define spinnerRotate:
@-webkit-keyframes spinnerRotate {
from {
-webkit-transform:rotate(0deg);
}
to {
-webkit-transform:rotate(360deg);
}
}
En Anglais: Rotate #spinner starting at 0 degrees, ending at 360 degrees, over a timespan of 2 seconds, at a constant speed, and keep repeating this animation forever.
That’s it! See it in action on the demo page.
Note: these examples only work when you’re using a WebKit-based browser like Safari, Mobile Safari or Google Chrome. I’m confident though that Mozilla and Opera will try their very best catching up with all this new CSS goodness soon.
When looking at this example, you see the possibilities are endless. Another advantage is you can change the look of it entirely by only changing a couple of lines of CSS, instead of re-creating and re-downloading the image from some website smelling like web 2.0 gone bad. I made another demo that shows how great it is to be able to change background and foreground colors (even on the fly!).
So there you have it, a smoothly animated, fully transparent and completely customizable spinner. Cool? I think so. (Ladies?)
But you can do a lot more with CSS animations than just create pretty spinners. Since I was fooling around with it anyway, I decided to test how far you can push this, space is the final limit, right?
Conclusion
CSS has never been more exciting than it is right now. I’m even prepared to say CSS is “cool” again, both for the more experienced front-end developers as for the new designers discovering CSS every day now.
But…
Remember when Javascript became popular? Remember when Flash became popular? Every time we’re been given new toys, some people aren’t ashamed to use it in a way you can barely call constructive. I’m thinking of Geocities websites, loaded with glowing blocks of text, moving images, bad color usage… In the wise words of Stan Lee: With great power there must also come great responsibility! A sprinkle of CSS animations is better than a bucket load. Apply with care. |
2009 |
Tim Van Damme |
timvandamme |
2009-12-15T00:00:00+00:00 |
https://24ways.org/2009/css-animations/ |
code |
| 192 |
Cleaner Code with CSS3 Selectors |
The parts of CSS3 that seem to grab the most column inches on blogs and in articles are the shiny bits. Rounded corners, text shadow and new ways to achieve CSS layouts are all exciting and bring with them all kinds of possibilities for web design. However what really gets me, as a developer, excited is a bit more mundane.
In this article I’m going to take a look at some of the ways our front and back-end code will be simplified by CSS3, by looking at the ways we achieve certain visual effects now in comparison to how we will achieve them in a glorious, CSS3-supported future. I’m also going to demonstrate how we can use these selectors now with a little help from JavaScript – which can work out very useful if you find yourself in a situation where you can’t change markup that is being output by some server-side code.
The wonder of nth-child
So why does nth-child get me so excited? Here is a really common situation, the designer would like the tables in the application to look like this:
Setting every other table row to a different colour is a common way to enhance readability of long rows. The tried and tested way to implement this is by adding a class to every other row. If you are writing the markup for your table by hand this is a bit of a nuisance, and if you stick a row in the middle you have to change the rows the class is applied to. If your markup is generated by your content management system then you need to get the server-side code to add that class – if you have access to that code.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Striping every other row - using classes</title>
<style type="text/css">
body {
padding: 40px;
margin: 0;
font: 0.9em Arial, Helvetica, sans-serif;
}
table {
border-collapse: collapse;
border: 1px solid #124412;
width: 600px;
}
th {
border: 1px solid #124412;
background-color: #334f33;
color: #fff;
padding: 0.4em;
text-align: left;
}
td {
padding: 0.4em;
}
tr.odd td {
background-color: #86B486;
}
</style>
</head>
<body>
<table>
<tr>
<th>Name</th>
<th>Cards sent</th>
<th>Cards received</th>
<th>Cards written but not sent</th>
</tr>
<tr>
<td>Ann</td>
<td>40</td>
<td>28</td>
<td>4</td>
</tr>
<tr class="odd">
<td>Joe</td>
<td>2</td>
<td>27</td>
<td>29</td>
</tr>
<tr>
<td>Paul</td>
<td>5</td>
<td>35</td>
<td>2</td>
</tr>
<tr class="odd">
<td>Louise</td>
<td>65</td>
<td>65</td>
<td>0</td>
</tr>
</table>
</body>
</html>
View Example 1
This situation is something I deal with on almost every project, and apart from being an extra thing to do, it just isn’t ideal having the server-side code squirt classes into the markup for purely presentational reasons. This is where the nth-child pseudo-class selector comes in. The server-side code creates a valid HTML table for the data, and the CSS then selects the odd rows with the following selector:
tr:nth-child(odd) td {
background-color: #86B486;
}
View Example 2
The odd and even keywords are very handy in this situation – however you can also use a multiplier here. 2n would be equivalent to the keyword ‘odd’ 3n would select every third row and so on.
Browser support
Sadly, nth-child has pretty poor browser support. It is not supported in Internet Explorer 8 and has somewhat buggy support in some other browsers. Firefox 3.5 does have support. In some situations however, you might want to consider using JavaScript to add this support to browsers that don’t have it. This can be very useful if you are dealing with a Content Management System where you have no ability to change the server-side code to add classes into the markup.
I’m going to use jQuery in these examples as it is very simple to use the same CSS selector used in the CSS to target elements with jQuery – however you could use any library or write your own function to do the same job. In the CSS I have added the original class selector to the nth-child selector:
tr:nth-child(odd) td, tr.odd td {
background-color: #86B486;
}
Then I am adding some jQuery to add a class to the markup once the document has loaded – using the very same nth-child selector that works for browsers that support it.
<script src="http://code.jquery.com/jquery-latest.js"></script>
<script>
$(document).ready(function(){
$("tr:nth-child(odd)").addClass("odd");
});
</script>
View Example 3
We could just add a background colour to the element using jQuery, however I prefer not to mix that information into the JavaScript as if we change the colour on our table rows I would need to remember to change it both in the CSS and in the JavaScript.
Doing something different with the last element
So here’s another thing that we often deal with. You have a list of items all floated left with a right hand margin on each element constrained within a fixed width layout. If each element has the right margin applied the margin on the final element will cause the set to become too wide forcing that last item down to the next row as shown in the below example where I have used a grey border to indicate the fixed width.
Currently we have two ways to deal with this. We can put a negative right margin on the list, the same width as the space between the elements. This means that the extra margin on the final element fills that space and the item doesn’t drop down.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>The last item is different</title>
<style type="text/css">
body {
padding: 40px;
margin: 0;
font: 0.9em Arial, Helvetica, sans-serif;
}
div#wrapper {
width: 740px;
float: left;
border: 5px solid #ccc;
}
ul.gallery {
margin: 0 -10px 0 0;
padding: 0;
list-style: none;
}
ul.gallery li {
float: left;
width: 240px;
margin: 0 10px 10px 0;
}
</style>
</head>
<body>
<div id="wrapper">
<ul class="gallery">
<li><img src="xmas1.jpg" alt="baubles" /></li>
<li><img src="xmas2.jpg" alt="star" /></li>
<li><img src="xmas3.jpg" alt="wreath" /></li>
</ul>
</div>
</body>
</html>
View Example 4
The other solution will be to put a class on the final element and in the CSS remove the margin for this class.
ul.gallery li.last {
margin-right: 0;
}
This second solution may not be easy if the content is generated from server-side code that you don’t have access to change.
It could all be so different. In CSS3 we have marvellously common-sense selectors such as last-child, meaning that we can simply add rules for the last list item.
ul.gallery li:last-child {
margin-right: 0;
}
View Example 5
This removed the margin on the li which is the last-child of the ul with a class of gallery. No messing about sticking classes on the last item, or pushing the width of the item out wit a negative margin.
If this list of items repeated ad infinitum then you could also use nth-child for this task. Creating a rule that makes every 3rd element margin-less.
ul.gallery li:nth-child(3n) {
margin-right: 0;
}
View Example 6
A similar example is where the designer has added borders to the bottom of each element – but the last item does not have a border or is in some other way different. Again, only a class added to the last element will save you here if you cannot rely on using the last-child selector.
Browser support for last-child
The situation for last-child is similar to that of nth-child, in that there is no support in Internet Explorer 8. However, once again it is very simple to replicate the functionality using jQuery. Adding our .last class to the last list item.
$("ul.gallery li:last-child").addClass("last");
We could also use the nth-child selector to add the .last class to every third list item.
$("ul.gallery li:nth-child(3n)").addClass("last");
View Example 7
Fun with forms
Styling forms can be a bit of a trial, made difficult by the fact that any CSS applied to the input element will effect text fields, submit buttons, checkboxes and radio buttons. As developers we are left adding classes to our form fields to differentiate them. In most builds all of my text fields have a simple class of text whereas I wouldn’t dream of adding a class of para to every paragraph element in a document.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Syling form fields</title>
<style type="text/css">
body {
padding: 40px;
margin: 0;
font: 0.9em Arial, Helvetica, sans-serif;
}
form div {
clear: left;
padding: 0 0 0.8em 0;
}
form label {
float: left;
width: 120px;
}
form .text, form textarea {
border:1px solid #333;
padding: 0.2em;
width: 400px;
}
form .button {
border: 1px solid #333;
background-color: #eee;
color: #000;
padding: 0.1em;
}
</style>
</head>
<body>
<h1>Send your Christmas list to Santa</h1>
<form method="post" action="" id="christmas-list">
<div><label for="fName">Name</label>
<input type="text" name="fName" id="fName" class="text" /></div>
<div><label for="fEmail">Email address</label>
<input type="text" name="fEmail" id="fEmail" class="text" /></div>
<div><label for="fList">Your list</label>
<textarea name="fList" id="fList" rows="10" cols="30"></textarea></div>
<div><input type="submit" name="btnSubmit" id="btnSubmit" value="Submit" class="button" ></div>
</form>
</body>
</html>
View Example 8
Attribute selectors provide a way of targeting elements by looking at the attributes of those elements. Unlike the other examples in this article which are CSS3 selectors, the attribute selector is actually a CSS2.1 selector – it just doesn’t get much use because of lack of support in Internet Explorer 6. Using attribute selectors we can write rules for text inputs and form buttons without needing to add any classes to the markup. For example after removing the text and button classes from my text and submit button input elements I can use the following rules to target them:
form input[type="text"] {
border: 1px solid #333;
padding: 0.2em;
width: 400px;
}
form input[type="submit"]{
border: 1px solid #333;
background-color: #eee;
color: #000;
padding: 0.1em;
}
View Example 9
Another problem that I encounter with forms is where I am using CSS to position my labels and form elements by floating the labels. This works fine as long as I want all of my labels to be floated, however sometimes we get a set of radio buttons or a checkbox, and I don’t want the label field to be floated. As you can see in the below example the label for the checkbox is squashed up into the space used for the other labels, yet it makes more sense for the checkbox to display after the text.
I could use a class on this label element however CSS3 lets me to target the label attribute directly by looking at the value of the for attribute.
label[for="fOptIn"] {
float: none;
width: auto;
}
Being able to precisely target attributes in this way is incredibly useful, and once IE6 is no longer an issue this will really help to clean up our markup and save us from having to create all kinds of special cases when generating this markup on the server-side.
Browser support
The news for attribute selectors is actually pretty good with Internet Explorer 7+, Firefox 2+ and all other modern browsers all having support. As I have already mentioned this is a CSS2.1 selector and so we really should expect to be able to use it as we head into 2010! Internet Explorer 7 has slightly buggy support and will fail on the label example shown above however I discovered a workaround in the Sitepoint CSS reference comments. Adding the selector label[htmlFor="fOptIn"] to the correct selector will create a match for IE7.
IE6 does not support these selector but, once again, you can use jQuery to plug the holes in IE6 support. The following jQuery will add the text and button classes to your fields and also add a checks class to the label for the checkbox, which you can use to remove the float and width for this element.
$('form input[type="submit"]').addClass("button");
$('form input[type="text"]').addClass("text");
$('label[for="fOptIn"]').addClass("checks");
View Example 10
The selectors I’ve used in this article are easy to overlook as we do have ways to achieve these things currently. As developers – especially when we have frameworks and existing code that cope with these situations – it is easy to carry on as we always have done.
I think that the time has come to start to clean up our front and backend code and replace our reliance on classes with these more advanced selectors. With the help of a little JavaScript almost all users will still get the full effect and, where we are dealing with purely visual effects, there is definitely a case to be made for not worrying about the very small percentage of people with old browsers and no JavaScript. They will still receive a readable website, it may just be missing some of the finesse offered to the modern browsing experience. |
2009 |
Rachel Andrew |
rachelandrew |
2009-12-20T00:00:00+00:00 |
https://24ways.org/2009/cleaner-code-with-css3-selectors/ |
code |
| 193 |
Web Content Accessibility Guidelines—for People Who Haven't Read Them |
I’ve been a huge fan of the Web Content Accessibility Guidelines 2.0 since the World Wide Web Consortium (W3C) published them, nine years ago. I’ve found them practical and future-proof, and I’ve found that they can save a huge amount of time for designers and developers. You can apply them to anything that you can open in a browser. My favourite part is when I use the guidelines to make a website accessible, and then attend user-testing and see someone with a disability easily using that website.
Today, the United Nations International Day of Persons with Disabilities, seems like a good time to re-read Laura Kalbag’s explanation of why we should bother with accessibility. That should motivate you to devour this article.
If you haven’t read the Web Content Accessibility Guidelines 2.0, you might find them a bit off-putting at first. The editors needed to create a single standard that countries around the world could refer to in legislation, and so some of the language in the guidelines reads like legalese. The editors also needed to future-proof the guidelines, and so some terminology—such as “time-based media” and “programmatically determined”—can sound ambiguous. The guidelines can seem lengthy, too: printing the guidelines, the Understanding WCAG 2.0 document, and the Techniques for WCAG 2.0 document would take 1,200 printed pages.
This festive season, let’s rip off that legalese and ambiguous terminology like wrapping paper, and see—in a single article—what gifts the Web Content Accessibility Guidelines 2.0 editors have bestowed upon us.
Can your users perceive the information on your website?
The first guideline has criteria that help you prevent your users from asking “What the **** is this thing here supposed to be?”
1.1.1 Text is the most accessible format for information. Screen readers—such as the “VoiceOver” setting on your iPhone or the “TalkBack” app on your Android phone—understand text better than any other format. The same applies for other assistive technology, such as translation apps and Braille displays. So, if you have anything on your webpage that’s not text, you must add some text that gives your user the same information. You probably know how to do this already; for example:
for images in webpages, put some alternative text in an alt attribute to tell your user what the image conveys to the user;
for photos in tweets, add a description to make the images accessible;
for Instagram posts, write a caption that conveys the photo’s information.
The alternative text should allow the user to get the same information as someone who can see the image. For websites that have too many images for someone to add alternative text to, consider how machine learning and Dynamically Generated Alt Text might—might—be appropriate.
You can probably think of a few exceptions where providing text to describe an image might not make sense. Remember I described these guidelines as “practical”? They cover all those exceptions:
User interface controls such as buttons and text inputs must have names or labels to tell your user what they do.
If your webpage has video or audio (more about these later on!), you must—at least—have text to tell the user what they are.
Maybe your webpage has a test where your user has to answer a question about an image or some audio, and alternative text would give away the answer. In that case, just describe the test in text so your users know what it is.
If your webpage features a work of art, tell your user the experience it evokes.
If you have to include a Captcha on your webpage—and please avoid Captchas if at all possible, because some users cannot get past them—you must include text to tell your user what it is, and make sure that it doesn’t rely on only one sense, such as vision.
If you’ve included something just as decoration, you must make sure that your user’s assistive technology can ignore it. Again, you probably know how to do this. For example, you could use CSS instead of HTML to include decorative images, or you could add an empty alt attribute to the img element. (Please avoid that recent trend where developers add empty alt attributes to all images in a webpage just to make the HTML validate. You’re better than that.)
(Notice that the guidelines allow you to choose how to conform to them, with whatever technology you choose. To make your website conform to a guideline, you can either choose one of the techniques for WCAG 2.0 for that guideline or come up with your own. Choosing a tried-and-tested technique usually saves time!)
1.2.1 If your website includes a podcast episode, speech, lecture, or any other recorded audio without video, you must include a transcription or some other text to give your user the same information. In a lot of cases, you might find this easier than you expect: professional transcription services can prove relatively inexpensive and fast, and sometimes a speaker or lecturer can provide the speech or lecture notes that they read out word-for-word. Just make sure that all your users can get the same information and the same results, whether they can hear the audio or not. For example, David Smith and Marco Arment always publish episode transcripts for their Under the Radar podcast.
Similarly, if your website includes recorded video without audio—such as an animation or a promotional video—you must either use text to detail what happens in the video or include an audio version. Again, this might work out easier then you perhaps fear: for example, you could check to see whether the animation started life as a list of instructions, or whether the promotional video conveys the same information as the “About Us” webpage. You want to make sure that all your users can get the same information and the same results, whether they can see that video or not.
1.2.2 If your website includes recorded videos with audio, you must add captions to those videos for users who can’t hear the audio. Professional transcription services can provide you with time-stamped text in caption formats that YouTube supports, such as .srt and .sbv. You can upload those to YouTube, so captions appear on your videos there. YouTube can auto-generate captions, but the quality varies from impressively accurate to comically inaccurate. If you have a text version of what the people in the video said—such as the speech that a politician read or the bedtime story that an actor read—you can create a transcript file in .txt format, without timestamps. YouTube then creates captions for your video by synchronising that text to the audio in the video. If you host your own videos, you can ask a professional transcription service to give you .vtt files that you can add to a video element’s track element—or you can handcraft your own. (A quick aside: if your website has more videos than you can caption in a reasonable amount of time, prioritise the most popular videos, the most important videos, and the videos most relevant to people with disabilities. Then make sure your users know how to ask you to caption other videos as they encounter them.)
1.2.3 If your website has recorded videos that have audio, you must add an “audio description” narration to the video to describe important visual details, or add text to the webpage to detail what happens in the video for users who cannot see the videos. (I like to add audio files from videos to my Huffduffer account so that I can listen to them while commuting.) Maybe your home page has a video where someone says, “I’d like to explain our new TPS reports” while “Bill Lumbergh, division Vice President of Initech” appears on the bottom of the screen. In that case, you should add an audio description to the video that announces “Bill Lumbergh, division Vice President of Initech”, just before Bill starts speaking. As always, you can make life easier for yourself by considering all of your users, before the event: in this example, you could ask the speaker to begin by saying, “I’m Bill Lumbergh, division Vice President of Initech, and I’d like to explain our new TPS reports”—so you won’t need to spend time adding an audio description afterwards.
1.2.4 If your website has live videos that have some audio, you should get a stenographer to provide real-time captions that you can include with the video. I’ll be honest: this can prove tricky nowadays. The Web Content Accessibility Guidelines 2.0 predate YouTube Live, Instagram live Stories, Periscope, and other such services. If your organisation creates a lot of live videos, you might not have enough resources to provide real-time captions for each one. In that case, if you know the contents of the audio beforehand, publish the contents during the live video—or failing that, publish a transcription as soon as possible.
1.2.5 Remember what I said about the recorded videos that have audio? If you can choose to either add an audio description or add text to the webpage to detail what happens in the video, you should go with the audio description.
1.2.6 If your website has recorded videos that include audio information, you could provide a sign language version of the audio information; some people understand sign language better than written language. (You don’t need to caption a video of a sign language version of audio information.)
1.2.7 If your website has recorded videos that have audio, and you need to add an audio description, but the audio doesn’t have enough pauses for you to add an “audio description” narration, you could provide a separate version of that video where you have added pauses to fit the audio description into.
1.2.8 Let’s go back to the recorded videos that have audio once more! You could add text to the webpage to detail what happens in the video, so that people who can neither read captions nor hear dialogue and audio description can use braille displays to understand your video.
1.2.9 If your website has live audio, you could get a stenographer to provide real-time captions. Again, if you know the contents of the audio beforehand, publish the contents during the live audio or publish a transcription as soon as possible.
(Congratulations on making it this far! I know that seems like a lot to remember, but keep in mind that we’ve covered a complex area: helping your users to understand multimedia information that they can’t see and/or hear. Grab a mince pie to celebrate, and let’s keep going.)
1.3.1 You must mark up your website’s content so that your user’s browser, and any assistive technology they use, can understand the hierarchy of the information and how each piece of information relates to the rest. Once again, you probably know how to do this: use the most appropriate HTML element for each piece of information. Mark up headings, lists, buttons, radio buttons, checkboxes, and links with the most appropriate HTML element. If you’re looking for something to do to keep you busy this Christmas, scroll through the list of the elements of HTML. Do you notice any elements that you didn’t know, or that you’ve never used? Do you notice any elements that you could use on your current projects, to mark up the content more accurately? Also, revise HTML table advanced features and accessibility, how to structure an HTML form, and how to use the native form widgets—you might be surprised at how much you can do with just HTML! Once you’ve mastered those, you can make your website much more usable for your all of your users.
1.3.2 If your webpage includes information that your user has to read in a certain order, you must make sure that their browser and assistive technology can present the information in that order. Don’t rely on CSS or whitespace to create that order visually. Check that the order of the information makes sense when CSS and whitespace aren’t formatting it. Also, try using the Tab key to move the focus through the links and form widgets on your webpage. Does the focus go where you expect it to? Keep this in mind when using order in CSS Grid or Flexbox.
1.3.3 You must not presume that your users can identify sensory characteristics of things on your webpage. Some users can’t tell what you’ve positioned where on the screen. For example, instead of asking your users to “Choose one of the options on the left”, you could ask them to “Choose one of our new products” and link to that section of the webpage.
1.4.1 You must not rely on colour as the only way to convey something to your users. Some of your users can’t see, and some of your users can’t distinguish between colours. For example, if your webpage uses green to highlight the products that your shop has in stock, you could add some text to identify those products, or you could group them under a sub-heading.
1.4.2 If your webpage automatically plays a sound for more than 3 seconds, you must make sure your users can stop the sound or change its volume. Don’t rely on your user turning down the volume on their computer; some users need to hear the screen reader on their computer, and some users just want to keep listening to whatever they were listening before your webpage interrupted them!
1.4.3 You should make sure that your text contrasts enough with its background, so that your users can read it. Bookmark Lea Verou’s Contrast Ratio calculator now. You can enter the text colour and background colour as named colours, or as RGB, RGBa, HSL, or HSLa values. You should make sure that:
normal text that set at 24px or larger has a ratio of at least 3:1;
bold text that set at 18.75px or larger has a ratio of at least 3:1;
all other text has a ratio of at least 4½:1.
You don’t have to do this for disabled form controls, decorative stuff, or logos—but you could!
1.4.4 You should make sure your users can resize the text on your website up to 200% without using their assistive technology—and still access all your content and functionality. You don’t have to do this for subtitles or images of text.
1.4.5 You should avoid using images of text and just use text instead. In 1998, Jeffrey Veen’s first Hot Design Tip said, “Text is text. Graphics are graphics. Don’t confuse them.” Now that you can apply powerful CSS text-styling properties, use CSS Grid to precisely position text, and choose from thousands of web fonts (Jeffrey co-founded Typekit to help with this), you pretty much never need to use images of text. The guidelines say you can use images of text if you let your users specify the font, size, colour, and background of the text in the image of text—but I’ve never seen that on a real website. Also, this doesn’t apply to logos.
1.4.6 Let’s go back to colour contrast for a second. You could make your text contrast even more with its background, so that even more of your users can read it. To do that, use Lea Verou’s Contrast Ratio calculator to make sure that:
normal text that is 24px or larger has a ratio of at least 4½:1;
bold text that 18.75px or larger has a ratio of at least 4½:1;
all other text has a ratio of at least 7:1.
1.4.7 If your website has recorded speech, you could make sure there are no background sounds, or that your users can turn off any background sounds. If that’s not possible, you could make sure that any background sounds that last longer than a couple of seconds are at least four times quieter than the speech. This doesn’t apply to audio Captchas, audio logos, singing, or rapping. (Yes, these guidelines mention rapping!)
1.4.8 You could make sure that your users can reformat blocks of text on your website so they can read them better. To do this, make sure that your users can:
specify the colours of the text and the background, and
make the blocks of text less than 80-characters wide, and
align text to the left (or right for right-to-left languages), and
set the line height to 150%, and
set the vertical distance between paragraphs to 1½ times the line height of the text, and
resize the text (without using their assistive technology) up to 200% and still not have to scroll horizontally to read it.
By the way, when you specify a colour for text, always specify a colour for its background too. Don’t rely on default background colours!
1.4.9 Let’s return to images of text for a second. You could make sure that you use them only for decoration and logos.
Can users operate the controls and links on your website?
The second guideline has criteria that help you prevent your users from asking, “How the **** does this thing work?”
2.1.1 You must make sure that you users can carry out all of your website’s activities with just their keyboard, without time limits for pressing keys. (This doesn’t apply to drawing or anything else that requires a pointing device such as a mouse.) Again, if you use the most appropriate HTML element for each piece of information and for each form element, this should prove easy.
2.1.2 You must make sure that when the user uses the keyboard to focus on some part of your website, they can then move the focus to some other part of your webpage without needing to use a mouse or touch the screen. If your website needs them to do something complex before they can move the focus elsewhere, explain that to your user. These “keyboard traps” have become rare, but beware of forms that move focus from one text box to another as soon as they receive the correct number of characters.
2.1.3 Let’s revisit making sure that you users can carry out all of your website’s activities with just their keyboard, without time limits for pressing keys. You could make sure that your user can do absolutely everything on your website with just the keyboard.
2.2.1 Sometimes people need more time than you might expect to complete a task on your website. If any part of your website imposes a time limit on a task, you must do at least one of these:
let your users turn off the time limit before they encounter it; or
let your users increase the time limit to at least 10 times the default time limit before they encounter it; or
warn your users before the time limit expires and give them at least 20 seconds to extend it, and let them extend it at least 10 times.
Remember: these guidelines are practical. They allow you to enforce time limits for real-time events such as auctions and ticket sales, where increasing or extending time limits wouldn’t make sense. Also, the guidelines allow you to enforce a maximum time limit of 20 hours. The editors chose 20 hours because people need to go to sleep at some stage. See? Practical!
2.2.2 In my experience, this criterion remains the least well-known—even though some users can only use websites that conform to it. If your website presents content alongside other content that can distract users by automatically moving, blinking, scrolling, or updating, you must make sure that your users can:
pause, stop, or hide the other content if it’s not essential and lasts more than 5 seconds; and
pause, stop, hide, or control the frequency of the other content if it automatically updates.
It’s OK if your users miss live information such as stock price updates or football scores; you can’t do anything about that! Also, this doesn’t apply to animations such as progress bars that you put on a website to let all users know that the webpage isn’t frozen.
(If this one sounds complex, just add a pause button to anything that might distract your users.)
2.2.3 Let’s go back to time limits on tasks on your website. You could make your website even easier to use by removing all time limits except those on real-time events such as auctions and ticket sales. That would mean your user wouldn’t need to interact with a timer at all.
2.2.4 You could let your users turn off all interruptions—server updates, promotions, and so on—apart from any emergency information.
2.2.5 This is possibly my favourite of these criteria! After your website logs your user out, you could make sure that when they log in again, they can continue from where they were without having lost any information. Do that, and you’ll be on everyone’s Nice List this Christmas.
2.3.1 You must make sure that nothing flashes more than three times a second on your website, unless you can make sure that the flashes remain below the acceptable general flash and red flash thresholds…
2.3.2 …or you could just make sure that nothing flashes more than three times per second on your website. This is usually an easier goal.
2.4.1 You must make sure that your users can jump past any blocks of content, such as navigation menus, that are repeated throughout your website. You know the drill here: using HTML’s sectioning elements such as header, nav, main, aside, and footer allows users with assistive technology to go straight to the content they need, and adding “Skip Navigation” links allows everyone to get to your main content faster.
2.4.2 You must add a proper title to describe each webpage’s topic. Your webpage won’t even validate without a title element, so make it a useful one.
2.4.3 If your users can focus on links and native form widgets, you must make sure that they can focus on elements in an order that makes sense.
2.4.4 You must make sure that your users can understand the purpose of a link when they read:
the text of the link; or
the text of the paragraph, list item, table cell, or table header for the cell that contains the link; or
the heading above the link.
You don’t have to do that for games and quizzes.
2.4.5 You should give your users multiple ways to find any webpage within a set of webpages. Add site-wide search and a site map and you’re done!
This doesn’t apply for a webpage that is part of a series of actions (like a shopping cart and checkout flow) or to a webpage that is a result of a series of actions (like a webpage confirming that the user has bought what was in the shopping cart).
2.4.6 You should help your users to understand your content by providing:
headings that describe the topics of you content;
labels that describe the purpose of the native form widgets on the webpage.
2.4.7 You should make sure that users can see which element they have focussed on. Next time you use your website, try hitting the Tab key repeatedly. Does it visually highlight each item as it moves focus to it? If it doesn’t, search your CSS to see whether you’ve applied outline: 0; to all elements—that’s usually the culprit. Use the :focus pseudo-element to define how elements should appear when they have focus.
2.4.8 You could help your user to understand where the current webpage is located within your website. Add “breadcrumb navigation” and/or a site map and you’re done.
2.4.9 You could make links even easier to understand, by making sure that your users can understand the purpose of a link when they read the text of the link. Again, you don’t have to do that for games and quizzes.
2.4.10 You could use headings to organise your content by topic.
Can users understand your content?
The third guideline has criteria that help you prevent your users from asking, “What the **** does this mean?”
3.1.1 Let’s start this section with the criterion that possibly takes the least time to implement; you must make sure that the user’s browser can identify the main language that your webpage’s content is written in. For a webpage that has mainly English content, use <html lang="en">.
3.1.2 You must specify when content in another language appears in your webpage, like so: <q>I wish you a <span lang="fr">Joyeux Noël</span>.</q>. You don’t have to do this for proper names, technical terms, or words that you can’t identify a language for. You also don’t have to do it for words from a different language that people consider part of the language around those words; for example, <q>Come to our Christmas rendezvous!</q> is OK.
3.1.3 You could make sure that your users can find out the meaning of any unusual words or phrases, including idioms like “stocking filler” or “Bah! Humbug!” and jargon such as “VoiceOver” and “TalkBack”. Provide a glossary or link to a dictionary.
3.1.4 You could make sure that your users can find out the meaning of any abbreviation. For example, VoiceOver pronounces “Xmas” as “Smas” instead of “Christmas”. Using the abbr element and linking to a glossary can help. (Interestingly, VoiceOver pronounces “abbr” as “abbreviation”!)
3.1.5 Do your users need to be able to read better than a typically educated nine-year-old, to read your content (apart from proper names and titles)? If so, you could provide a version that doesn’t require that level of reading ability, or you could provide images, videos, or audio to explain your content. (You don’t have to add captions or audio description to those videos.)
3.1.6 You could make sure that your users can access the pronunciation of any word in your content if that word’s meaning depends on its pronunciation. For example, the word “close” could have one of two meanings, depending on pronunciation, in a phrase such as, “Ready for Christmas? Close now!”
3.2.1 Some users need to focus on elements to access information about them. You must make sure that focusing on an element doesn’t trigger any major changes, such as opening a new window, focusing on another element, or submitting a form.
3.2.2 Webpages are easier for users when the controls do what they’re supposed to do. Unless you have warned your users about it, you must make sure that changing the value of a control such as a text box, checkbox, or drop-down list doesn’t trigger any major changes, such as opening a new window, focusing on another element, or submitting a form.
3.2.3 To help your users to find the content they want on each webpage, you should put your navigation elements in the same place on each webpage. (This doesn’t apply when your user has changed their preferences or when they use assistive technology to change how your content appears.)
3.2.4 When a set of webpages includes things that have the same functionality on different webpages, you should name those things consistently. For example, don’t use the word “Search” for the search box on one webpage and “Find” for the search box on another webpage within that set of webpages.
3.2.5 Let’s go back to major changes, such as a new window opening, another element taking focus, or a form being submitted. You could make sure that they only happen when users deliberately make them happen, or when you have warned users about them first. For example, you could give the user a button for updating some content instead of automatically updating that content. Also, if a link will open in a new window, you could add the words “opens in new window” to the link text.
3.3.1 Users make mistakes when filling in forms. Your website must identify each mistake to your user, and must describe the mistake to your users in text so that the user can fix it. One way to identify mistakes reliably to your users is to set the aria-invalid attribute to true in the element that has a mistake. That makes sure that users with assistive technology will be alerted about the mistake. Of course, you can then use the [aria-invalid="true"] attribute selector in your CSS to visually highlight any such mistakes. Also, look into how certain attributes of the input element such as required, type, and list can help prevent and highlight mistakes.
3.3.2 You must include labels or instructions (and possibly examples) in your website’s forms, to help your users to avoid making mistakes.
3.3.3 When your user makes a mistake when filling in a form, your webpage should suggest ways to fix that mistake, if possible. This doesn’t apply in scenarios where those suggestions could affect the security of the content.
3.3.4 Whenever your user submits information that:
has legal or financial consequences; or
affects information that they have previously saved in your website; or
is part of a test
…you should make sure that they can:
undo it; or
correct any mistakes, after your webpage checks their information; or
review, confirm, and correct the information before they finally submit it.
3.3.5 You could help prevent your users from making mistakes by providing obvious, specific help, such as examples, animations, spell-checking, or extra instructions.
3.3.6 Whenever your user submits any information, you could make sure that they can:
undo it; or
correct any mistakes, after your webpage checks their information; or
review, confirm, and correct the information before they finally submit it.
Have you made your website robust enough to work on your users’ browsers and assistive technologies?
The fourth and final guideline has criteria that help you prevent your users from asking, “Why the **** doesn’t this work on my device?”
4.1.1 You must make sure that your website works as well as possible with current and future browsers and assistive technology. Prioritise complying with web standards instead of relying on the capabilities of currently popular devices and browsers. Web developers didn’t expect their users to be unwrapping the Wii U Browser five years ago—who knows what browsers and assistive technologies our users will be unwrapping in five years’ time? Avoid hacks, and use the W3C Markup Validation Service to make sure that your HTML has no errors.
4.1.2 If you develop your own user interface components, you must make their name, role, state, properties, and values available to your user’s browsers and assistive technologies. That should make them almost as accessible as standard HTML elements such as links, buttons, and checkboxes.
“…and a partridge in a pear tree!”
…as that very long Christmas song goes. We’ve covered a lot in this article—because your users have a lot of different levels of ability. Hopefully this has demystified the Web Content Accessibility Guidelines 2.0 for you. Hopefully you spotted a few situations that could arise for users on your website, and you now know how to tackle them.
To start applying what we’ve covered, you might like to look at Sarah Horton and Whitney Quesenbery’s personas for Accessible UX. Discuss the personas, get into their heads, and think about which aspects of your website might cause problems for them. See if you can apply what we’ve covered today, to help users like them to do what they need to do on your website.
How to know when your website is perfectly accessible for everyone
LOL! There will never be a time when your website becomes perfectly accessible for everyone. Don’t aim for that. Instead, aim for regularly testing and making your website more accessible.
Web Content Accessibility Guidelines (WCAG) 2.1
The W3C hope to release the Web Content Accessibility Guidelines (WCAG) 2.1 as a “recommendation” (that’s what the W3C call something that we should start using) by the middle of next year. Ten years may seem like a long time to move from version 2.0 to version 2.1, but consider the scale of the task: the editors have to update the guidelines to cover all the new ways that people interact with new technologies, while keeping the guidelines backwards-compatible. Keep an eye out for 2.1!
You’ll go down in history
One last point: I’ve met a surprising number of web designers and developers who do great work to make their websites more accessible without ever telling their users about it. Some of your potential customers have possibly tried and failed to use your website in the past. They probably won’t try again unless you let them know that things have improved. A quick Twitter search for your website’s name alongside phrases like “assistive technology”, “doesn’t work”, or “#fail” can let you find frustrated users—so you can tell them about how you’re making your website more accessible. Start making your websites work better for everyone—and please, let everyone know. |
2017 |
Alan Dalton |
alandalton |
2017-12-03T00:00:00+00:00 |
https://24ways.org/2017/wcag-for-people-who-havent-read-them/ |
code |
| 195 |
Levelling Up for Junior Developers |
If you are a junior developer starting out in the web industry, things can often seem a little daunting. There are so many things to learn, and as soon as you’ve learnt one framework or tool, there seems to be something new out there.
I am lucky enough to lead a team of developers building applications for the web. During a recent One to One meeting with one of our junior developers, he asked me about a learning path and the basic fundamentals that every developer should know. After a bit of digging around, I managed to come up with a (not so exhaustive) list of principles that was shared with him.
In this article, I will share the list with you, and hopefully help you level up from junior developer and become a better developer all round. This list doesn’t focus on an particular programming language, but rather coding concepts as a whole. The idea behind this list is that whether you are a front-end developer, back-end developer, full stack developer or just a curious one, these principles apply to everyone that writes code.
I have tried to be technology agnostic, so that you can use these tips to guide you, whatever your tech stack might be.
Without any further ado and in no particular order, let’s get started.
Refactoring code like a boss
The Boy Scouts have a rule that goes “always leave the campground cleaner than you found it.” This rule can be applied to code too and ensures that you leave code cleaner than you found it. As a junior developer, it’s almost certain that you will either create or come across older code that could be improved. The resources below are a guide that will help point you in the right direction.
My favourite book on this subject has to be Clean Code by Robert C. Martin. It’s a must read for anyone writing code as it helps you identify bad code and shows you techniques that you can use to improve existing code.
If you find that in your day to day work you deal with a lot of legacy code, Improving Existing Technology through Refactoring is another useful read.
Design Patterns are a general repeatable solution to a commonly occurring problem in software design. My friend and colleague Ranj Abass likes to refer to them as a “common language” that helps developers discuss the way that we write code as a pattern. My favourite book on this subject is Head First Design Patterns which goes right back to the basics. Another great read on this topic is Refactoring to Patterns.
Working Effectively With Legacy Code is another one that I found really valuable.
Improving your debugging skills
A solid understanding of how to debug code is a must for any developer. Whether you write code for the web or purely back-end code, the ability to debug will save you time and help you really understand what is going on under the hood.
If you write front-end code for the web, one of my favourite resources to help you understand how to debug code in Chrome can be found on the Chrome Dev Tools website. While some of the tips are specific to Chrome, these techniques apply to any modern browser of your choice.
At Settled, we use Node.js for much of our server side code. Without a doubt, our most trusted IDE has to be Visual Studio Code and the built-in debuggers are amazing. Regardless of whether you use Node.js or not, there are a number of plugins and debuggers that you can use in the IDE. I recommend reading the website of your favourite IDE for more information.
As a side note, it is worth mentioning that Chrome Developer Tools actually has functionality that allows you to debug Node.js code too. This makes it a seamless transition from front-end code to server-side code debugging.
The Debugging Mindset is an informative online article by Devon H. O’Dell and discusses the the psychology of learning strategies that lead to effective problem-solving skills.
A good understanding of relational databases and NoSQL databases
Almost all developers will need to persist data at some point in their career. Even if you don’t write SQL queries in your day to day job, a solid understanding of how they work will help you become a better developer.
If you are a complete newbie when it comes to databases, I recommend checking out Code Academy. They offer a free online course that can help you get your head around how relational databases work. The course is quite basic, but is a useful hands-on approach to learning this topic.
This article provides a great explainer for the difference between the SQL and NoSQL databases, and this Stackoverflow answer goes a little deeper into the subject of the two database types.
If you’d like to learn more about NoSQL queries, I would recommend starting with this article on MongoDB queries. Unfortunately, there isn’t one overall course as most NoSQL databases have their own syntax.
You may also have noticed that I haven’t included other types of databases such as Graph or In-memory; it’s worth focussing on the basics before going any deeper.
Performance on the web
If you build for the web today, it is important to understand how the browser receives and renders the content that you send it. I am pretty passionate about Web Performance, and hope that everyone can learn how to make websites faster and more efficient. It can be fun at the same time!
Steve Souders High Performance Websites is the godfather of web performance books. While it was created a few years ago and many of the techniques might have changed slightly, it is the original book on the subject and set up many of the ground rules that we know about web performance today.
A free online resource on this topic is the Google Developers website. The site is an up to date guide on the best web performance techniques for your site. It is definitely worth a read.
The network plays a key role in delivering data to your users, and it plays a big role in performance on the web. A fantastic book on this topic is Ilya Grigorik’s High Performance Browser Networking. It is also available to read online at hpbn.co.
Understand the end to end architecture of your software project
I find that one of the best ways to improve my knowledge is to learn about the architecture of the software at the company I work at. It gives you a good understanding as to why things are designed the way they are, why certain decisions were made, and gives you an understanding of how you might do things differently with hindsight.
Try and find someone more senior, such as a Technical Lead or Software Architect, at your company and ask them to explain the overall architecture and draw a few high-level diagrams for you. Not to mention that they will be impressed with your willingness to learn.
I recommend reading Clean Architecture: A Craftsman’s Guide to Software Structure and Design for more detail on this subject.
Far too often, software projects can be over-engineered and over-architected, it is worth reading Just Enough Software Architecture. The book helps developers understand how the smallest of changes can affect the outcome of your software architecture.
How are things deployed
A big part of creating software is actually shipping it! How is the software at your company released into the wild? Does your company do Continuous Integration? Continuous Deployment?
Even if you answered no to any of these questions, it is worth finding someone with the knowledge in your company to explain these things to you. If it is not already documented, perhaps you could start a wiki to document everything you’re learning about the system - this is a great way to level up and be appreciated and invaluable.
A streamlined deployment process is a beautiful thing, and understanding how they work can help you grow your knowledge as a developer.
Continuous Integration is a practical read on the ins and outs of implementing this deployment technique.
Docker is another great tool to use when it comes to software deployment. It can be tricky at first to wrap your head around, but it is definitely worth learning about this great technology. The documentation on the website will teach and guide you on how to get started using Docker.
Writing Tests
Testing is an essential tool in the developer bag of skills. They help you to make big refactoring changes to your code, and feel a lot more confident knowing that your changes haven’t broken anything. There are so many benefits to testing, which make it so important for developers at every level to become acquainted with it/them.
The book that started it all for me was Roy Osherove’s The Art of Unit Testing. The code in the book is written in C#, but the principles apply to every language. It’s a great, easy-to-understand read.
Another great read is How Google Tests Software and covers exactly what it says on the tin. It covers many different testing techniques such as exploratory, black box, white box, and acceptance testing and really helps you understand how large organisations test their code.
Soft skills
Whilst reading through this article, you’ve probably noticed that a large chunk of it focusses on code and technical ability. Without a doubt, I’d say that it is even more important to be a good teammate. If you look up the definition of soft skills in the dictionary, it is defined as “personal attributes that enable someone to interact effectively and harmoniously with other people” and I think that it sums this up perfectly. Working on your “soft skills” is something that can truly help you level up in your career. You may be the world’s greatest coder, but if you colleagues can’t get along with you, your coding skills won’t matter!
While you may not learn how to become the perfect co-worker overnight, I really try and live by the motto “don’t be an arsehole”. Think about how you like to be treated and then try and treat your co-workers with the same courtesy and respect. The next time you need to make a decision at work, ask yourself “is this something an arsehole would do”? If you answered yes to that question, you probably shouldn’t do it!
Summary
Levelling up as a junior developer doesn’t have to be scary. Focus on the fundamentals and they should hold you in good stead, regardless of the new things that come along. Software engineering is built on these great principles that have stood the test of time.
Whilst researching for this article, I came across a useful Github repo that is worth mentioning. Things Every Programmer Should Know is packed with useful information. I have to admit, I didn’t know everything on there!
I hope that you have found this list helpful. Some of the topics I have mentioned might not be relevant for you at this stage in your career, but should give a nudge in the right direction. After all, knowledge is power!
If you are a junior developer reading this article, what would you add to it? |
2017 |
Dean Hume |
deanhume |
2017-12-05T00:00:00+00:00 |
https://24ways.org/2017/levelling-up-for-junior-developers/ |
code |
| 201 |
Lint the Web Forward With Sonarwhal |
Years ago, when I was in a senior in college, much of my web development courses focused on two things: the basics like HTML and CSS (and boy, do I mean basic), and Adobe Flash. I spent many nights writing ActionScript 3.0 to build interactions for the websites that I would add to my portfolio. A few months after graduating, I built one website in Flash for a client, then never again. Flash was dying, and it became obsolete in my résumé and portfolio.
That was my first lesson in the speed at which things change in technology, and what a daunting realization that was as a new graduate looking to enter the professional world. Now, seven years later, I work on the Microsoft Edge team where I help design and build a tool that would have lessened my early career anxieties: sonarwhal.
Sonarwhal is a linting tool, built by and for the web community. The code is open source and lives under the JS Foundation. It helps web developers and designers like me keep up with the constant change in technology while simultaneously teaching how to code better websites.
Introducing sonarwhal’s mascot Nellie
Good web development is hard. It is more than HTML, CSS, and JavaScript: developers are expected to have a grasp of accessibility, performance, security, emerging standards, and more, all while refreshing this knowledge every few months as the web evolves. It’s a lot to keep track of.
Web development is hard
Staying up-to-date on all this knowledge is one of the driving forces for developing this scanning tool. Whether you are just starting out, are a student, or you have over a decade of experience, the sonarwhal team wants to help you build better websites for all browsers.
Currently sonarwhal checks for best practices in five categories: Accessibility, Interoperability, Performance, PWAs, and Security. Each check is called a “rule”. You can configure them and even create your own rules if you need to follow some specific guidelines for your project (e.g. validate analytics attributes, title format of pages, etc.).
You can use sonarwhal in two ways:
An online version, that provides a quick and easy way to scan any public website.
A command line tool, if you want more control over the configuration, or want to integrate it into your development flow.
The Online Scanner
The online version offers a streamlined way to scan a website; just enter a URL and you will get a web page of scan results with a permalink that you can share and revisit at any time.
The online version of sonarwal
When my team works on a new rule, we spend the bulk of our time carefully researching each subject, finding sources, and documenting it rather than writing the rule’s code. Not only is it important that we get you the right results, but we also want you to understand why something is failing. Next to each failing rule you’ll find a link to its detailed documentation, explaining why you should care about it, what exactly we are testing, examples that pass and examples that don’t, and useful links to even more in-depth documentation if you are interested in the subject.
We hope that between reading the documentation and continued use of sonarwhal, developers can stay on top of best practices. As devs continue to build sites and identify recurring issues that appear in their results, they will hopefully start to automatically include those missing elements or fix those pieces of code that are producing errors. This also isn’t a one-way communication: the documentation is not only available on the sonarwhal site, but also on GitHub for editing so you can help us make it even better!
A results report
The current configuration for the online scanner is very strict, so it might hurt your feelings (it did when I first tested it on my personal website). But you can configure sonarwhal to any level of strictness as well as customize the command line tool to your needs!
Sonarwhal’s CLI
The CLI gives you full control of sonarwhal: what rules to use, tweaks to them, domains that are out of your control, and so on. You will need the latest node LTS (v8) or Stable (v9) and your favorite package manager, such as npm:
npm install -g sonarwhal
You can now run sonarwhal from anywhere via:
sonarwhal https://example.com
Using the CLI
The configuration is done via a .sonarwhalrc file. When analyzing a site, if no file is available, you will be prompted to answer a series of questions:
What connector do you want to use? Connectors are what sonarwhal uses to access a website and gather all the information about the requests, resources, HTML, etc. Currently it supports jsdom, Microsoft Edge, and Google Chrome.
What formatter? This is how you want to see the results: summary, stylish, etc. Make sure to look at the full list. Some are concise for, perfect for a quick build assessment, while others are more verbose and informative.
Do you want to use the recommended rules configuration? Rules are the things we are validating. Unless you’ve read the documentation and know what you are doing, first timers should probably use the recommended configuration.
What browsers are you targeting? One of the best features of sonarwhal is that rules can adapt their feedback depending on your targeted browsers, suggesting to add or remove things. For example, the rule “Highest Document Mode” will tell you to add the “X-UA-Compatible” header if IE10 or lower is targeted or remove if the opposite is true.
sonarwhal configuration generator questions
Once you answer all these questions the scan will start and you will have a .sonarwhalrc file similar to the following:
{
"connector": {
"name": "jsdom",
"options": {
"waitFor": 1000
}
},
"formatters": "stylish",
"rulesTimeout": 120000,
"rules": {
"apple-touch-icons": "error",
"axe": "error",
"content-type": "error",
"disown-opener": "error",
"highest-available-document-mode": "error",
"validate-set-cookie-header": "warning",
// ...
}
}
You should see the scan initiate in the command line and within a few seconds the results should start to appear. Remember, the scan results will look different depending on which formatter you selected so try each one out to see which one you like best.
sonarwhal results on my website and hurting my feelings 💔
Now that you have a list of errors, you can get to work improving the site! Note though, that when you scan your website, it scans all the resources on that page and if you’ve added something like analytics or fonts hosted elsewhere, you are unable to change those files. You can configure the CLI to ignore files from certain domains so that you are only getting results for files you are in control of.
The documentation should give enough guidance on how to fix the errors, but if it’s insufficient, please help us and suggest edits or contribute back to it. This is a community effort and chances are someone else will have the same question as you.
When I scanned both my websites, sonarwhal alerted me to not having an Apple Touch Icon. If I search on the web as opposed to using the sonarwhal documentation, the first top 3 results give me outdated information: I need to include many different icon sizes. I don’t need to include all the different size icons that target different devices. Declaring one icon sized 180px x 180px will provide a large enough icon for devices and it will scale down as appropriate for people on older devices.
The information at the top of the search results isn’t always the correct answer to an issue and we don’t want you to have to search through outdated documentation. As sonarwhal’s capabilities expand, the goal is for it to be the one stop shop for helping preflight your website.
The journey up until now and looking forward
On the Microsoft Edge team, we’re passionate about empowering developers to build great websites. Every day we see so many sites come through our issue tracker. (Thanks for filing those bugs, they help us make Microsoft Edge better and better!) Some issues we see over and over are honest mistakes or outdated ‘best practices’ that could be avoided, so we built this tool to help everyone help make the web a better place.
When we decided to create sonarwhal, we wanted to create a tool that would help developers write better and more up-to-date code for their websites. We want sonarwhal to be useful to anyone so, early on, we defined three guiding principles we’ve used along the way:
Community Driven. We build for the community’s best interests. The web belongs to everyone and this project should too. Not only is it open source, we’ve also donated it to the JS Foundation and have an inclusive governance model that welcomes the collaboration of anyone, individual or company.
User Centric. We want to put the user at the center, making sonarwhal configurable for your needs and easy to use no matter what your skill level is.
Collaborative. We didn’t want to reinvent the wheel, so we collaborated with existing tools and services that help developers build for the web. Some examples are aXe, snyk.io, Cloudinary, etc.
This is just the beginning and we still have lots to do. We’re hard at work on a backlog of exciting features for future releases, such as:
New rules for a variety of areas like performance, accessibility, security, progressive web apps, and more.
A plug-in for Visual Studio Code: we want sonarwhal to help you write better websites, and what better moment than when you are in your editor.
Configuration options for the online service: as we fine tune the infrastructure, the rule configuration for our scanner is locked, but we look forward to adding CLI customization options here in the near future.
This is a tool for the web community by the web community so if you are excited about sonarwhal, making a better web, and want to contribute, we have a few issues where you might be able to help. Also, don’t forget to check the rest of the sonarwhal GitHub organization. PRs are always welcome and appreciated!
Let us know what you think about the scanner at @NarwhalNellie on Twitter and we hope you’ll help us lint the web forward! |
2017 |
Stephanie Drescher |
stephaniedrescher |
2017-12-02T00:00:00+00:00 |
https://24ways.org/2017/lint-the-web-forward-with-sonarwhal/ |
code |
| 202 |
Design Systems and CSS Grid |
Recently, my client has been looking at creating a few new marketing pages for their website. They currently have a design system in place but they’re looking to push this forward into 2018 with some small and possibly some larger changes.
To start with we are creating a couple of new marketing pages. As well as making use of existing components within the design systems component library there are a couple of new components. Looking at the first couple of sketch files I felt this would be a great opportunity to use CSS Grid, to me the newer components need to be laid out on that page and grid would help with this perfectly.
As well as this layout of the new components and the text within it, imagery would be used that breaks out of the grid and pushes itself into the spaces where the text is aligned.
The existing grid system
When the site was rebuilt in 2015 the team decided to make use of Sass and Susy, a “lightweight grid-layout engine using Sass”. It was built separating the grid system from the components that would be laid out on the page with a container, a row, an optional column, and a block.
To make use of the grid system on a page for a component that would take the full width of the row you would have to write something like this:
<div class="grid-container">
<div class="grid-row">
<div class="grid-column-4">
<div class="grid-block">
<!-- component code here -->
</div>
</div>
</div>
</div>
Using a grid system similar to this can easily create quite the tag soup. It could fill the HTML full of divs that may become complex to understand and difficult to edit.
Although there is this reliance on several <div>s to lay out the components on a page it does allow a tidy way to place the component code within that page. It abstracts the layout of the page to its own code, its own system, so the components can ‘fit’ where needed.
The requirements of the new grid system
Moving forward I set myself some goals for what I’d like to have achieved in this new grid system:
It needs to behave like the existing grid systems
We are not ripping up the existing grid system, it would be too much work, for now, to retrofit all of the existing components to work in a grid that has a different amount of columns, and spacing at various viewport widths.
Allow full-width components
Currently the grid system is a 14 column grid that becomes centred on the page when viewport is wide enough. We have, in the past, written some CSS that would allow for a full-width component, but his had always felt like a hack. We want the option to have a full-width element as part of the new grid system, not something that needs CSS to fight against.
Less of a tag soup
Ideally we want to end up writing less HTML to layout the page. Although the existing system can be quite clear as to what each element is doing, it can also become a little laborious in working out what each grid row or block is doing where.
I would like to move the layout logic to CSS as much as is possible, potentially creating some utility classes or additional ‘layout classes’ for the components.
Easier for people to use and author
With many people using the existing design systems codebase we need to create a new grid system that is as easy or easier to use than the existing one. I think and hope this would be helped by removing as many <div>s as needed and would require new documentation and examples, and potentially some initial training.
Separating layout from style
There still needs to be a separation of layout from the styles for the component. To allow for the component itself to be placed wherever needed in the page we need to make sure that the CSS for the layout is a separate entity to the CSS for that styling.
With these base requirements I took to CodePen and started working on some throwaway code to get started.
Making the new grid(s)
The Full-Width Grid
To start with I created a grid that had three columns, one for the left, one for the middle, and one for the right. This would give the full-width option to components.
Thankfully, one of Rachel Andrew’s many articles on Grid discussed this exact requirement of the new grid system to break out with Grid.
I took some of the code in the examples and edited to make grid we needed.
.container {
display: grid;
grid-template-columns:
[full-start]
minmax(.75em, 1fr)
[main-start]
minmax(0, 1008px)
[main-end]
minmax(.75em, 1fr)
[full-end];
}
We are declaring a grid, we have four grid column lines which we name and we define how the three columns they create react to the viewport width. We have a left and right column that have a minimum of 12px, and a central column with a maximum width of 1008px.
Both left and right columns fill up any additional space if the viewport is wider that 1032px wide. We are also not declaring any gutters to this grid, the left and right columns would act as gutters at smaller viewports.
At this point I noticed that older versions of Sass cannot parse the brackets in this code. To combat this I used Sass’ unquote method to wrap around the value of the grid-template-column.
.container {
display: grid;
grid-template-columns:
unquote("
[full-start]
minmax(.75em, 1fr)
[main-start]
minmax(0, 1008px)
[main-end]
minmax(.75em, 1fr)
[full-end]
");
}
The existing codebase makes use of Sass variables, mixins and functions so to remove that would be a problem, but luckily the version of Sass used is up-to-date (note: example CodePens will be using CSS).
The initial full-width grid displays on a webpage as below:
The 14 column grid
I decided to work out the 14 column grid as a separate prototype before working out how it would fit within the full-width grid. This grid is very similar to the 12 column grids that have been used in web design. Here we need 14 columns with a gutter between each one.
Along with the many other resources on Grid, Mozilla’s MDN site had a page on common layouts using CSS Grid. This gave me the perfect CSS I needed to create my grid and I edited it as required:
.inner {
display: grid;
grid-template-columns: repeat(14, [col-start] 1fr);
grid-gap: .75em;
}
We, again, are declaring a grid, and we are splitting up the available space by creating 14 columns with 1 fr-unit and giving each one a starting line named col-start.
This grid would display on web page as below:
Bringing the grids together
Now that we have got the two grids we need to help fulfil our requirements we need to put them together so that they are actually we we need.
The subgrid
There is no subgrid in CSS, yet. To workaround this for the new grid system we could nest the 14 column grid inside the full-width grid.
In the HTML we nest the 14 column inner grid inside the full-width container.
<div class="container">
<div class="inner">
</div>
</div>
So that the inner knows where to be laid out within the container we tell it what column to start and end with, with this code it would be the start and end of the main column.
.inner {
display: grid;
grid-column: main-start / main-end;
grid-template-columns: repeat(14, [col-start] 1fr);
grid-gap: .75em;
}
The CSS for the container remains unchanged.
This works, but we have added another div to our HTML. One of our requirements is to try and remove the potential for tag soup.
The faux subgrid subgrid
I wanted to see if it would be possible to place the CSS for the 14 column grid within the CSS for the full-width grid. I replaced the CSS for the main grid and added the grid-column-gap to the .container.
.container {
display: grid;
grid-gap: .75em;
grid-template-columns:
[full-start]
minmax(.75em, 1fr)
[main-start]
repeat(14, [col-start] 1fr)
[main-end]
minmax(.75em, 1fr)
[full-end];
}
What this gave me was a 16 column grid. I was unable to find a way to tell the main grid, the grid betwixt main-start and main-end to be a maximum of 1008px as required.
I trawled the internet to find if it was possible to create our main requirement, a 14 column grid which also allows for full-width components. I found that we could not reverse minmax to minmax(1fr, 72px) as 1fr is not allowed as a minimum if there is a maximum. I tried working out if we could make the min larger than its max but in minmax it would be ignored.
I was struggling, I was hoping for a cleaner version of the grid system we currently use but getting to the point where needing that extra <div> would be a necessity.
At 3 in the morning, when I was failing to get to sleep, my mind happened upon an question: “Could you use calc?”
At some point I drifted back to sleep so the next day I set upon seeing if this was possible. I knew that the maximum width of the central grid needed to be 1008px. The left and right columns needed to be however many pixels were left in the viewport divided by 2. In CSS it looked like I would need to use calc twice. The first time to takeaway 1008px from 100% of the viewport width and the second to divide that result by 2.
calc(calc(100% - 1008px) / 2)
The CSS above was part of the value that I would need to include in the declaration for the grid.
.container {
display: grid;
grid-gap: .75em;
grid-template-columns:
[full-start]
minmax(calc(calc(100% - 1008px) / 2), 1fr)
[main-start]
repeat(14, [col-start] 1fr)
[main-end]
minmax(calc(calc(100% - 1008px) / 2), 1fr)
[full-end];
}
We have created the grid required. A full-width grid, with a central 14 column grid, using fewer <div> elements.
See the Pen Design Systems and CSS Grid, 6 by Stuart Robson (@sturobson) on CodePen.
Success!
Progressive enhancement
Now that we have created the grid system required we need to back-track a little.
Not all browsers support Grid, over the last 9 months or so this has gotten a lot better. However there will still be browsers that visit that potentially won’t have support. The effort required to make the grid system fall back for these browsers depends on your product or sites browser support.
To determine if we will be using Grid or not for a browser we will make use of feature queries. This would mean that any version of Internet Explorer will not get Grid, as well as some mobile browsers and older versions of other browsers.
@supports (display: grid) {
/* Styles for browsers that support Grid */
}
If a browser does not pass the requirements for @supports we will fallback to using flexbox where possible, and if that is not supported we are happy for the page to be laid out in one column.
A website doesn’t have to look the same in every browser after all.
A responsive grid
We started with the big picture, how the grid would be at a large viewport and the grid system we have created gets a little silly when the viewport gets smaller.
At smaller viewports we have a single column layout where every item of content, every component stacks atop each other. We don’t start to define a grid before we the viewport gets to 700px wide. At this point we have an 8 column grid and if the viewport gets to 1100px or wider we have our 14 column grid.
/*
* to start with there is no 'grid' just a single column
*/
.container {
padding: 0 .75em;
}
/*
* when we get to 700px we create an 8 column grid with
* a left and right area to breakout of the grid.
*/
@media (min-width: 700px) {
.container {
display: grid;
grid-gap: .75em;
grid-template-columns:
[full-start]
minmax(calc(calc(100% - 1008px) / 2), 1fr)
[main-start]
repeat(8, [col-start] 1fr)
[main-end]
minmax(calc(calc(100% - 1008px) / 2), 1fr)
[full-end];
padding: 0;
}
}
/*
* when we get to 1100px we create an 14 column grid with
* a left and right area to breakout of the grid.
*/
@media (min-width: 1100px) {
.container {
grid-template-columns:
[full-start]
minmax(calc(calc(100% - 1008px) / 2), 1fr)
[main-start]
repeat(14, [col-start] 1fr)
[main-end]
minmax(calc(calc(100% - 1008px) / 2), 1fr)
[full-end];
}
}
Being explicit in creating this there is some repetition that we could avoid, we will define the number of columns for the inner grid by using a Sass variable or CSS custom properties (more commonly termed as CSS variables).
Let’s use CSS custom properties. We need to declare the variable first by adding it to our stylesheet.
:root {
--inner-grid-columns: 8;
}
We then need to edit a few more lines. First make use of the variable for this line.
repeat(8, [col-start] 1fr)
/* replace with */
repeat(var(--inner-grid-columns), [col-start] 1fr)
Then at the 1100px breakpoint we would only need to change the value of the —inner-grid-columns value.
@media (min-width: 1100px) {
.container {
grid-template-columns:
[full-start]
minmax(calc(calc(100% - 1008px) / 2), 1fr)
[main-start]
repeat(14, [col-start] 1fr)
[main-end]
minmax(calc(calc(100% - 1008px) / 2), 1fr)
[full-end];
}
}
/* replace with */
@media (min-width: 1100px) {
.container {
--inner-grid-columns: 14;
}
}
See the Pen Design Systems and CSS Grid, 8 by Stuart Robson (@sturobson) on CodePen.
The final grid system
We have finally created our new grid for the design system. It stays true to the existing grid in place, adds the ability to break-out of the grid, removes a <div> that could have been needed for the nested 14 column grid.
We can move on to the new component.
Creating a new component
Back to the new components we are needing to create.
To me there are two components one of which is a slight variant of the first. This component contains a title, subtitle, a paragraph (potentially paragraphs) of content, a list, and a call to action.
To start with we should write the HTML for the component, something like this:
<article class="features">
<h3 class="features__title"></h3>
<p class="features__subtitle"></p>
<div class="features__content">
<p class="features__paragraph"></p>
</div>
<ul class="features__list">
<li></li>
<li></li>
</ul>
<a href="" class="features__button"></a>
</article>
To place the component on the existing grid is fine, but as child elements are not affected by the container grid we need to define another grid for the features component.
As the grid doesn’t get invoked until 700px it is possible to negate the need for a media query.
.features {
grid-column: col-start 1 / span 6;
}
@supports (display: grid) {
@media (min-width: 1100px) {
.features {
grid-column-end: 9;
}
}
}
We can also avoid duplication of declarations by making use of the grid-column shorthand and longhand. We need to write a little more CSS for the variant component, the one that will sit on the right side of the page too.
.features:nth-of-type(even) {
grid-column-start: 4;
grid-row: 2;
}
@supports (display: grid) {
@media (min-width: 1100px) {
.features:nth-of-type(even) {
grid-column-start: 9;
grid-column-end: 16;
}
}
}
We cannot place the items within features on the container grid as they are not direct children. To make this work we have to define a grid for the features component.
We can do this by defining the grid at the first breakpoint of 700px making use of CSS custom properties again to define how many columns there will need to be.
.features {
grid-column: col-start 1 / span 6;
--features-grid-columns: 5;
}
@supports (display: grid) {
@media (min-width: 700px) {
.features {
display: grid;
grid-gap: .75em;
grid-template-columns: repeat(var(--features-grid-columns), [col-start] 1fr);
}
}
}
@supports (display: grid) {
@media (min-width: 1100px) {
.features {
grid-column-end: 9;
--features-grid-columns: 7;
}
}
}
See the Pen Design Systems and CSS Grid, 10 by Stuart Robson (@sturobson) on CodePen.
Laying out the parts
Looking at the spec and reading several articles I feel there are two ways that I could layout the text of this component on the grid.
We could use the grid-column shorthand that incorporates grid-column-start and grid-column-end or we can make use of grid-template-areas.
grid-template-areas allow for a nice visual way of representing how the parts of the component would be laid out. We can take the the mock of the features on the grid and represent them in text in our CSS.
Within the .features rule we can add the relevant grid-template-areas value to represent the above.
.features {
display: grid;
grid-template-columns: repeat(var(--features-grid-columns), [col-start] 1fr);
grid-template-areas:
". title title title title title title"
". subtitle subtitle subtitle subtitle subtitle . "
". content content content content . . "
". list list list . . . "
". . . . link link link ";
}
In order to make the variant of the component we would have to create the grid-template-areas for that component too.
We then need to tell each element of the component in what grid-area it should be placed within the grid.
.features__title { grid-area: title; }
.features__subtitle { grid-area: subtitle; }
.features__content { grid-area: content; }
.features__list { grid-area: list; }
.features__link { grid-area: link; }
See the Pen Design Systems and CSS Grid, 12 by Stuart Robson (@sturobson) on CodePen.
The other way would be to use the grid-column shorthand and the grid-column-start and grid-column-end we have used previously.
.features .features__title {
grid-column: col-start 2 / span 6;
}
.features .features__subtitle {
grid-column: col-start 2 / span 5;
}
.features .features__content {
grid-column: col-start 2 / span 4;
}
.features .features__list {
grid-column: col-start 2 / span 4;
}
.features .features__link {
grid-column: col-start 5 / span 3;
}
For the variant of the component we can use the grid-column-start property as it will inherit the span defined in the grid-column shorthand.
.features:nth-of-type(even) .features__title {
grid-column-start: col-start 1;
}
.features:nth-of-type(even) .features__subtitle {
grid-column-start: col-start 1;
}
.features:nth-of-type(even) .features__content {
grid-column-start: col-start 3;
}
.features:nth-of-type(even) .features__list {
grid-column-start: col-start 3;
}
.features:nth-of-type(even) .features__link {
grid-column-start: col-start 1;
}
See the Pen Design Systems and CSS Grid, 14 by Stuart Robson (@sturobson) on CodePen.
I think, for now, we will go with using grid-column properties rather than grid-template-areas. The repetition needed for creating the variant feels too much where we can change the grid-column-start instead, keeping the components elements layout properties tied a little closer to the elements rather than the grid.
Some additional decisions
The current component library has existing styles for titles, subtitles, lists, paragraphs of text and calls to action. These are name-spaced so that they shouldn’t clash with any other components. Looking forward there will be a chance that other products adopt the component library, but they may bring their own styles for titles, subtitles, etc.
One way that we could write our code now for that near future possibility is to make sure our classes are working hard. Using class-attribute selectors we can target part of the class attributes that we know the elements in the component will have using *=.
.features [class*="title"] {
grid-column: col-start 2 / span 6;
}
.features [class*="subtitle"] {
grid-column: col-start 2 / span 5;
}
.features [class*="content"] {
grid-column: col-start 2 / span 4;
}
.features [class*="list"] {
grid-column: col-start 2 / span 4;
}
.features [class*="link"] {
grid-column: col-start 5 / span 3;
}
See the Pen Design Systems and CSS Grid, 15 by Stuart Robson (@sturobson) on CodePen.
Although the component we have created have a title, subtitle, paragraphs, a list, and a call to action there may be a time where one ore more of these is not required or available. One thing I found out is that if the element doesn’t exist then grid will not create space for it. This may be obvious, but it can be really helpful in making a nice malleable component.
We have only looked at columns, as existing components have their own spacing for the vertical rhythm of the page we don’t really want to have them take up equal space in the component and just take up the space as needed. We can do this by adding grid-auto-rows: min-content; to our .features. This is useful if you also need your component to take up a height that is more than the component itself.
The grid of the future
From prototyping this new grid and components in CSS Grid, I’ve found it a fantastic way to reimagine how we can create a layout or grid system for our sites. It gives us options to create the same layouts in differing ways that could suit a project and its needs.
It allows us to carry on – if we choose to – using a <div>-based grid but swapping out floats for CSS Grid or to tie it to our components so they have specific places to go depending on what component is being used. Or we could have several ‘grid components’ in our design system that we could use to layout various components throughout a page.
If you find yourself tasked with creating some new components for your design system try it. If you are starting from scratch I believe you really should start with CSS Grid for your layout.
It really feels like the possibilities are endless in terms of layout for the web.
Resources
Here are just a few resources I have pawed over these last few weeks whilst getting acquainted with CSS Grid.
A collection of CodePens from this article
Grid by Example from Rachel Andrew
A Complete Guide to CSS Grid on Codrops from Hui Jing Chen
Rachel Andrew’s Blog Archive tagged: cssgrid
CSS Grid Layout Examples
MDN’s CSS Grid Layout
A Complete Guide to Grid from CSS-Tricks
CSS Grid Layout Module Level 1 Specification |
2017 |
Stuart Robson |
stuartrobson |
2017-12-12T00:00:00+00:00 |
https://24ways.org/2017/design-systems-and-css-grid/ |
code |
| 204 |
Cascading Web Design with Feature Queries |
Feature queries, also known as the @supports rule, were introduced as an extension to the CSS2 as part of the CSS Conditional Rules Module Level 3, which was first published as a working draft in 2011. It is a conditional group rule that tests if the browser’s user agent supports CSS property:value pairs, and arbitrary conjunctions (and), disjunctions (or), and negations (not) of them.
The motivation behind this feature was to allow authors to write styles using new features when they were supported but degrade gracefully in browsers where they are not. Even though the nature of CSS already allows for graceful degradation, for example, by ignoring unsupported properties or values without disrupting other styles in the stylesheet, sometimes we need a bit more than that.
CSS is ultimately a holistic technology, in that, even though you can use properties in isolation, the full power of CSS shines through when used in combination. This is especially evident when it comes to building web layouts. Having native feature detection in CSS makes it much more convenient to build with cutting-edge CSS for the latest browsers while supporting older browsers at the same time.
Browser support
Opera first implemented feature queries in November 2012, both Chrome and Firefox had it since May 2013. There have been several articles about feature queries written over the years, however, it seems that awareness of its broad support isn’t that well-known. Much of the earlier coverage on feature queries was not written in English, and perhaps that was a limiting factor.
@supports ― CSSのFeature Queries by Masataka Yakura, August 8 2012
Native CSS Feature Detection via the @supports Rule by Chris Mills, December 21 2012
CSS @supports by David Walsh, April 3 2013
Responsive typography with CSS Feature Queries by Aral Balkan, April 9 2013
How to use the @supports rule in your CSS by Lea Verou, January 31 2014
CSS Feature Queries by Amit Tal, June 2 2014
Coming Soon: CSS Feature Queries by Adobe Web Platform Team, August 21 2014
CSS feature queries mittels @supports by Daniel Erlinger, November 27 2014
As of December 2017, all current major browsers and their previous 2 versions support feature queries. Feature queries are also supported on Opera Mini, UC Browser and Samsung Internet. The only browsers that do not support feature queries are Internet Explorer and Blackberry Mobile, but that may be less of an issue than you might think.
Can I Use css-featurequeries? Data on support for the css-featurequeries feature across the major browsers from caniuse.com.
Granted, there is still a significant number of organisations that require support of Internet Explorer. Microsoft still continues to support IE11 for the life-cycle of Windows 7, 8 and 10. They have, however, stopped supporting older versions since January 12, 2016. It is inevitable that there will be organisations that, for some reason or another, make it mandatory to support IE, but as time goes on, this number will continue to shrink.
Jen Simmons wrote an extensive article called Using Feature Queries in CSS which discussed a matrix of potential situations when it comes to the usage of feature queries. The following image is a summary of the aforementioned matrix.
The most tricky situation we have to deal with is the box in the top-left corner, which are “browsers that don’t support feature queries, yet do support the feature in question”. For cases like those, it really depends on the specific CSS feature you want to use and a subsequent evaluation of the pros and cons of not including that feature in spite of the fact the browser (most likely Internet Explorer) supports it.
The basics of feature queries
As with any conditional, feature queries operate on boolean logic, in other words, if the query resolves to true, apply the CSS properties within the block, or else just ignore the entire block altogether. The syntax of a simple feature query is as follows:
.selector {
/* Styles that are supported in old browsers */
}
@supports (property:value) {
.selector {
/* Styles for browsers that support the specified property */
}
}
Note that the parentheses around the property:value pair are mandatory and the rule is invalid without them. Styles that apply to older browsers, i.e. fallback styles, should come first, followed by the newer properties, which are contained within the @supports conditional. Because of the cascade, fallback styles will be overridden by the newer properties in the modern browsers that support them.
main {
background-color: red;
}
@supports (display:grid) {
main {
background-color: green;
}
}
In this example, browsers that support CSS grid will have a main element with a green background colour because the conditional resolves to true, while browsers that do not support grid will have a main element with a red background colour.
The implication of such behaviour means that we can layer on enhanced styles based on the features we want to use and these styles will show up in browsers that support them. But for those that do not, they will get a more basic look that still works anyway. And that will be our approach moving forward.
Boolean operators for feature queries
The and operator allows us to test for support of multiple properties within a single conditional. This would be useful for cases where the desired output requires multiple cutting-edge features to be supported at the same time to work. All the property:value pairs listed in the conditional must resolve to true for the styles within the rule to be applied.
@supports (transform: rotate(45deg)) and
(writing-mode: vertical-rl) {
/* Some CSS styles */
}
The or operator allows us to list multiple property:value pairs in the conditional and as long as one of them resolves to true, the styles within the block will be applied. A relevant use-case would be for properties with vendor-prefixes.
@supports (background: -webkit-gradient(linear, left top, left bottom, from(white), to(black))) or
(background: -o-linear-gradient(top, white, black)) or
(background: linear-gradient(to bottom, white, black)) {
/* Some CSS styles */
}
The not operator negates the resolution of the property:value pair in the conditional, resolving to false when the property is supported and vice versa. This is useful when there are two distinct sets of styles to be applied depending on the support of a specific feature. However, we do need to keep in mind the case where a browser does not support feature queries, and handle the styles for those browsers accordingly.
@supports not (shape-outside: polygon(100% 80%,20% 0,100% 0)) {
/* Some CSS styles */
}
To avoid confusion between and and or, these operators must be explicitly declared as opposed to using commas or spaces. To prevent confusion caused by precedence rules, and, or and not operators cannot be mixed without a layer of parentheses.
This rule is not valid and the styles within the block will be ignored.
@supports (transition-property: background-color) or
(animation-name: fade) and
(transform: scale(1.5)) {
/* Some CSS styles */
}
To make it work, parentheses must be added either around the two properties adjacent to the or or the and operator like so:
@supports ((transition-property: background-color) or
(animation-name: fade)) and
(transform: scale(1.5)) {
/* Some CSS styles */
}
@supports (transition-property: background-color) or
((animation-name: fade) and
(transform: scale(1.5))) {
/* Some CSS styles */
}
The current specification states that whitespace is required after a not and on both sides of an and or or, but this may change in a future version of the specification. It is acceptable to add extra parentheses even when they are not needed, but omission of parentheses is considered invalid.
Cascading web design
I’d like to introduce the concept of cascading web design, an approach made possible with feature queries. Browser update cycles are much shorter these days, so new features and bug fixes are being pushed out a lot more frequently as compared to the early days of the web.
With the maturation of web standards, browser behaviour is less unpredictable than before, but each browser will still have their respective quirks. Chances are, the latest features will not ship across all browsers at the same time. But you know what? That’s perfectly fine. If we accept this as a feature of the web, instead of a bug, we’ve just opened up a lot more web design possibilities.
The following example is a basic, responsive grid layout of items laid out with flexbox, as viewed on IE11.
We can add a block of styles within an @supports rule to apply CSS grid properties for browsers that support them to enhance this layout, like so:
The web is not a static medium. It is dynamic and interactive and we manipulate this medium by writing code to tell the browser what we want it to do. Rather than micromanaging the pixels in our designs, maybe it’s time we cede control of our designs to the browsers that render them. This means being okay with your designs looking different across browsers and devices.
As mentioned earlier, CSS works best when various properties are combined. It’s one of those things whose whole is greater than the sum of its parts. So feature queries, when combined with media queries, allow us to design layouts that are most effective in the environment they have to perform in.
Such an approach requires interpolative thinking, on multiple levels. As web designers and developers, we don’t just think in one fixed dimension, we get to think about how our design will morph on a narrow screen, or on an older browser, in addition to how it will appear on a browser with the latest features.
In the following example, the layout on the left is what IE11 users will see, the one in the middle is what Firefox users will see, because Firefox doesn’t support CSS shapes yet, but once it does, it will then look like the layout on the right, which is what Chrome users see now.
With the release of CSS Grid this year, we’ve hit another milestone in the evolution of the web as a medium. The beauty of the web is its backwards compatibility and generous fault tolerance. Browser features are largely additive, holding onto the good parts and building on top of them, while deprecating the bits that didn’t work well.
Feature queries allow us to progressively enhance our CSS, establishing a basic level of user experience across the widest range of browsers, while building in more advanced functionality for browsers who can use them. And hopefully, this will allow more of us to create designs that truly embrace the nature of the web. |
2017 |
Chen Hui Jing |
chenhuijing |
2017-12-01T00:00:00+00:00 |
https://24ways.org/2017/cascading-web-design/ |
code |
| 206 |
Getting Hardboiled with CSS Custom Properties |
Custom Properties are a fabulous new feature of CSS and have widespread support in contemporary browsers. But how do we handle browsers without support for CSS Custom Properties? Do we wait until those browsers are lying dead in a ditch before we use them? Do we tool up and prop up our CSS using a post-processor? Or do we get tough? Do we get hardboiled?
Previously only pre-processing tools like LESS and Sass enabled developers to use variables in their stylesheets, but now Custom Properties have brought variables natively to CSS.
How do you write a custom property? It’s hardly a mystery. Simply add two dashes to the start of a style rule. Like this:
--color-text-default : black;
If you’re more the underscore type, try this:
--color_text_default : black;
Hyphens or underscores are allowed in property names, but don’t be a chump and try to use spaces.
Custom property names are also case-sensitive, so --color-text-default and --Color_Text_Default are two distinct properties.
To use a custom property in your style rules, var() tells a browser to retrieve the value of a property. In the next example, the browser retrieves the black colour from the color-text-default variable and applies it to the body element:
body {
color : var(--color-text-default);
}
Like variables in LESS or Sass, CSS Custom Properties mean you don’t have to be a dumb mug and repeat colour, font, or size values multiple times in your stylesheets. Unlike a preprocessor variable though, CSS Custom Properties use the cascade, can be modified by media queries and other state changes, and can also be manipulated by Javascript.
(Serg Hospodarets wrote a fabulous primer on CSS Custom Properties where he dives deeper into the code and possible applications.)
Browser support
Now it’s about this time that people normally mention browser support. So what about support for CSS Custom Properties? Current versions of Chrome, Edge, Firefox, Opera, and Safari are all good. Internet Explorer 11 and before? Opera Mini? Nasty.
Sound familiar?
Can I Use css-variables? Data on support for the css-variables feature across the major browsers from caniuse.com.
Not to worry, we can manually check for Custom Property support in a browser by using an @support directive, like this:
--color-text-default : black;
body {
color : black;
}
@supports ((--foo : bar)) {
body {
color : var(--color-text-default);
}
}
In that example we first set body element text to black and then override that colour with a Custom Property value when the browser supports our fictitious foo bar variable.
Substitutions
If we reference a variable that hasn’t been defined, that won’t be a problem as browsers are smart enough to ignore the value altogether. If we need a cast iron alibi, use substitutions to specify a fall-back value.
body {
color : var(--color-text-default, black);
}
Substitutions are similar to font stacks in that they contain a comma separated list of values. If there’s no value associated with a property, a browser will ignore it and move onto the next value in the list.
Post-processing
Of course we could use a post-processor plugin to turn Custom Properties into plain CSS, but hang on one goddam minute kiddo.
Haven’t we been down this road before? Didn’t we engineer elaborate workarounds to enable us to use ‘advanced’ CSS3 properties like border-radius, CSS columns, and Flexbox in the past? We did what we had to do to get the job done, but came away feeling dirty.
I think there’s a better way, one that allows us to enjoy the benefits of CSS Custom Properties in browsers that support them, while providing an appropriate, but not identical experience, for people who use less capable browsers. Guess what, I’ve been down this road before too.
2Tone Stuff & Nonsense
When Internet Explorer 6 was the big dumb browser everyone hated, I served two different designs on my website.
For the modern browsers of the time, mod arrows and targets were everywhere in glorious red, white, and blue, and I implemented all of them using CSS attribute selectors which were considered advanced at the time:
[class="banner"] {
background-colour : red;
}
Internet Explorer 6 ignored any selectors it didn’t understand, so people using that browser saw a simpler black and white, 2Tone-based design that I’d implemented for them using class selectors:
.banner {
background-colour : black;
}
[class="banner"] {
background-colour : red;
}
You don’t have to be a detective to find out that most people thought I’d lost my wits, but Microsoft even used my website as a reference when they tested attribute selectors in Internet Explorer 7. They did, as I suggested, “Stomp to da betta browser.”
Dumb browsers look the other way
So how does this approach relate to tackling any lack of support for CSS Custom Properties? How can we take advantage of them without worrying about browsers with no support and having to implement complex workarounds, or spending hours specifying fallbacks that perfectly match our designs?
Turns out, the answer is built into CSS, and always has been, because when browsers don’t know what they’re looking at, they look away.
All we have to do is first specify values for a simpler design first, and then follow that up with the values in our CSS Custom Properties:
body {
color : black;
color : var(--color-text-default, black);
}
All browsers understand the first value (black,) and if they‘re smart enough to understand the second (var(--color-text-default)), they’ll use it and override the first. If they’re too damn stupid to understand the custom property value, they’ll ignore it. Nobody dies.
Repeat this for every style that contains a variable, baking an alternative, perhaps simpler design into your stylesheets for people who use less capable browsers, just like I did with Stuff & Nonsense.
Conclusion
I doubt that anyone agrees with presenting a design that looks broken or unloved—and I’m not advocating for that—but websites need not look the same in every browser. We can use substitutions to present a simpler design to people using less capable browsers.
The decision when to start using new CSS properties isn‘t always a technical one. Sometimes a change in attitude about browser support is all that’s required. So get tough with dumb browsers and benefit from all the advantages that CSS Custom Properties offer. Get hardboiled.
Resources:
It’s Time To Start Using CSS Custom Properties—Smashing Magazine
Using CSS variables correctly—Mike Riethmuller
Developing Inspired Guides with CSS Custom Properties (variables)—Andy Clarke |
2017 |
Andy Clarke |
andyclarke |
2017-12-13T00:00:00+00:00 |
https://24ways.org/2017/getting-hardboiled-with-css-custom-properties/ |
code |
| 209 |
Feeding the Audio Graph |
In 2004, I was given an iPod.
I count this as one of the most intuitive pieces of technology I’ve ever owned. It wasn’t because of the the snazzy (colour!) menus or circular touchpad. I loved how smoothly it fitted into my life. I could plug in my headphones and listen to music while I was walking around town. Then when I got home, I could plug it into an amplifier and carry on listening there.
There was no faff. It didn’t matter if I could find my favourite mix tape, or if my WiFi was flakey - it was all just there.
Nowadays, when I’m trying to pair my phone with some Bluetooth speakers, or can’t find my USB-to-headphone jack, or even access any music because I don’t have cellular reception; I really miss this simplicity.
The Web Audio API
I think the Web Audio API feels kind of like my iPod did.
It’s different from most browser APIs - rather than throwing around data, or updating DOM elements - you plug together a graph of audio nodes, which the browser uses to generate, process, and play sounds.
The thing I like about it is that you can totally plug it into whatever you want, and it’ll mostly just work.
So, let’s get started. First of all we want an audio source.
<audio src="night-owl.mp3" controls />
(Song - Night Owl by Broke For Free)
This totally works. However, it’s not using the Web Audio API, so we can’t access or modify the sound it makes.
To hook this up to our audio graph, we can use an AudioSourceNode. This captures the sound from the element, and lets us connect to other nodes in a graph.
const audioCtx = new AudioContext()
const audio = document.querySelector('audio')
const input = audioCtx.createAudioSourceNode(audio)
input.connect(audioCtx.destination)
Great. We’ve made something that looks and sounds exactly the same as it did before. Go us.
Gain
Let’s plug in a GainNode - this allows you to alter the amplitude (volume) of an an audio stream.
We can hook this node up to an <input> element by setting the gain property of the node. (The syntax for this is kind of weird because it’s an AudioParam which has options to set values at precise intervals).
const node = audioCtx.createGain()
const input = document.querySelector('input')
input.oninput = () => node.gain.value = parseFloat(input.value)
input.connect(node)
node.connect(audioCtx.destination)
You can now see a range input, which can be dragged to update the state of our graph. This input could be any kind of element, so now you’ll be free to build the volume control of your dreams.
There’s a number of nodes that let you modify/filter an audio stream in more interesting ways. Head over to the MDN Web Audio page for a list of them.
Analysers
Something else we can add to our graph is an AnalyserNode. This doesn’t modify the audio at all, but allows us to inspect the sounds that are flowing through it. We can put this into our graph between our AudioSourceNode and the GainNode.
const analyser = audioCtx.createAnalyser()
input.connect(analyser)
analyser.connect(gain)
gain.connect(audioCtx.destination)
And now we have an analyser. We can access it from elsewhere to drive any kind of visuals. For instance, if we wanted to draw lines on a canvas we could totally do that:
const waveform = new Uint8Array(analyser.fftSize)
const frequencies = new Uint8Array(analyser.frequencyBinCount)
const ctx = canvas.getContext('2d')
const loop = () => {
requestAnimationFrame(loop)
analyser.getByteTimeDomainData(waveform)
analyser.getByteFrequencyData(frequencies)
ctx.beginPath()
waveform.forEach((f, i) => ctx.lineTo(i, f))
ctx.lineTo(0,255)
frequencies.forEach((f, i) => ctx.lineTo(i, 255-f))
ctx.stroke()
}
loop()
You can see that we have two arrays of data available (I added colours for clarity):
The waveform - the raw samples of the audio being played.
The frequencies - a fourier transform of the audio passing through the node.
What’s cool about this is that you’re not tied to any specific functionality of the Web Audio API. If it’s possible for you to update something with an array of numbers, then you can just apply it to the output of the analyser node.
For instance, if we wanted to, we could definitely animate a list of emoji in time with our music.
spans.forEach(
(s, i) => s.style.transform = `scale(${1 + (frequencies[i]/100)})`
)
🔈🎤🎤🎤🎺🎷📯🎶🔊🎸🎺🎤🎸🎼🎷🎺🎻🎸🎻🎺🎸🎶🥁🎶🎵🎵🎷📯🎸🎹🎤🎷🎻🎷🔈🔊📯🎼🎤🎵🎼📯🥁🎻🎻🎤🔉🎵🎹🎸🎷🔉🔈🔉🎷🎶🔈🎸🎸🎻🎤🥁🎼📯🎸🎸🎼🎸🥁🎼🎶🎶🥁🎤🔊🎷🔊🔈🎺🔊🎻🎵🎻🎸🎵🎺🎤🎷🎸🎶🎼📯🔈🎺🎤🎵🎸🎸🔊🎶🎤🥁🎵🎹🎸🔈🎻🔉🥁🔉🎺🔊🎹🥁🎷📯🎷🎷🎤🎸🔉🎹🎷🎸🎺🎼🎤🎼🎶🎷🎤🎷📯📯🎻🎤🎷📯🎹🔈🎵🎹🎼🔊🔉🔉🔈🎶🎸🥁🎺🔈🎷🎵🔉🥁🎷🎹🎷🔊🎤🎤🔊🎤🎤🎹🎸🎹🔉🎷
Generating Audio
So far, we’ve been using the <audio> element as a source of sound.
There’s a few other sources of audio that we can use. We’ll look at the AudioBufferNode - which allows you to manually generate a sound sample, and then connect it to our graph.
First we have to create an AudioBuffer, which holds our raw data, then we pass that to an AudioBufferNode which we can then treat just like our AudioSource node. This can get a bit boring, so we’ll use a helper method that makes it simpler to generate sounds.
const generator = (audioCtx, target) => (seconds, fn) => {
const { sampleRate } = audioCtx
const buffer = audioCtx.createBuffer(
1, sampleRate * seconds, sampleRate
)
const data = buffer.getChannelData(0)
for (var i = 0; i < data.length; i++) {
data[i] = fn(i / sampleRate, seconds)
}
return () => {
const source = audioCtx.createBufferSource()
source.buffer = audioBuffer
source.connect(target || audioCtx.destination)
source.start()
}
}
const sound = generator(audioCtx, gain)
Our wrapper will let us provide a function that maps time (in seconds) to a sample (between 1 and -1). This generates a waveform, like we saw before with the analyser node.
For example, the following will generate 0.75 seconds of white noise at 20% volume.
const noise = sound(0.75, t => Math.random() * 0.2)
button.onclick = noise
Noise
Now we’ve got a noisy button! Handy.
Rather than having a static set of audio nodes, each time we click the button, we add a new node to our graph. Although this feels inefficient, it’s not actually too bad - the browser can do a good job of cleaning up old nodes once they’ve played.
An interesting property of defining sounds as functions is that we can combine multiple function to generate new sounds. So if we wanted to fade our noise in and out, we could write a higher order function that does that.
const ease = fn => (t, s) =>
fn(t) * Math.sin((t / s) * Math.PI)
const noise = sound(0.75, ease(t => Math.random() * 0.2))
ease(noise)
And we can do more than just white noise - if we use Math.sin, we can generate some nice pure tones.
// Math.sin with period of 0..1
const wave = v => Math.sin(Math.PI * 2 * v)
const hz = f => t => wave(t * f)
const _440hz = sound(0.75, ease(hz(440)))
const _880hz = sound(0.75, ease(hz(880)))
440Hz
880Hz
We can also make our functions more complex. Below we’re combining several frequencies to make a richer sounding tone.
const harmony = f => [4, 3, 2, 1].reduce(
(v, h, i) => (sin(f * h) * (i+1) ) + v
)
const a440 = sound(0.75, ease(harmony(440)))
440Hz
880Hz
Cool.
We’re still not using any audio-specific functionality, so we can repurpose anything that does an operation on data. For example, we can use d3.js - usually used for interactive data visualisations - to generate a triangular waveform.
const triangle = d3.scaleLinear()
.domain([0, .5, 1])
.range([-1, 1, -1])
const wave = t => triangle(t % 1)
const a440 = sound(0.75, ease(harmony(440)))
440Hz
880Hz
It’s pretty interesting to play around with different functions. I’ve plonked everything in jsbin if you want to have a play yourself.
A departure from best practice
We’ve been generating our audio from scratch, but most of what we’ve looked at can be implemented by a series of native Web Audio nodes. This would be way performant (because it’s not happening on the main thread), and more flexible in some ways (because you can set timings dynamically whilst the note is playing). But we’re going to stay with this approach because it’s fun, and sometimes the fun thing to do might not technically be the best thing to do.
Making a keyboard
Having a button that makes a sound is totally great, but how about lots of buttons that make lots of sounds? Yup, totally greater-er.
The first thing we need to know is the frequency of each note. I thought this would be awkward because pianos were invented more than 250 years before the Hz unit was defined, so surely there wouldn’t be a simple mapping between the two?
const freq = note => 27.5 * Math.pow(2, (note - 21) / 12)
This equation blows my mind; I’d never really figured how tightly music and maths fit together. When you see a chord or melody, you can directly map it back to a mathematical pattern.
Our keyboard is actually an SVG picture of a keyboard, so we can traverse the elements of it and map each element to a sound generated by one of the functions that we came up with before.
Array.from(svg.querySelector('rect'))
.sort((a, b) => + a.x - b.x)
.forEach((key, i) =>
key.addEventListener('touchstart',
sound(0.75, ease(harmony(freq(i + 48))))
)
)
rect {stroke: #ddd;}
rect:hover {opacity: 0.8; stroke: #000}
Et voilà. We have a keyboard.
What I like about this is that it’s completely pure - there’s no lookup tables or hardcoded attributes; we’ve just defined a mapping from SVG elements to the sound they should probably make.
Doing better in the future
As I mentioned before, this could be implemented more performantly with Web Audio nodes, or even better - use something like Tone.js to be performant for you.
Web Audio has been around for a while, though we’re getting new challenges with immersive WebXR experiences, where spatial audio becomes really important. There’s also always support and API improvements (if you like AudioBufferNode, you’re going to love AudioWorklet)
Conclusion
And that’s about it. Web Audio isn’t some black box, you can easily link it with whatever framework, or UI that you’ve built (whether you should is an entirely different question).
If anyone ever asks you “could you turn this SVG into a musical instrument?” you don’t have to stare blankly at them any more.
(function(a,c){var b=a.createElement("script");if(!("noModule"in b)&&"on"+c in b){var d=!1;a.addEventListener(c,function(a){if(a.target===b)d=!0;else if(!a.target.hasAttribute("nomodule")||!d)return;a.preventDefault()},!0);b.type="module";b.src=".";a.head.appendChild(b);b.remove()}})(document,"beforeload"); |
2017 |
Ben Foxall |
benfoxall |
2017-12-17T00:00:00+00:00 |
https://24ways.org/2017/feeding-the-audio-graph/ |
code |
| 211 |
Automating Your Accessibility Tests |
Accessibility is one of those things we all wish we were better at. It can lead to a bunch of questions like: how do we make our site better? How do we test what we have done? Should we spend time each day going through our site to check everything by hand? Or just hope that everyone on our team has remembered to check their changes are accessible?
This is where automated accessibility tests can come in. We can set up automated tests and have them run whenever someone makes a pull request, and even alongside end-to-end tests, too.
Automated tests can’t cover everything however; only 20 to 50% of accessibility issues can be detected automatically. For example, we can’t yet automate the comparison of an alt attribute with an image’s content, and there are some screen reader tests that need to be carried out by hand too. To ensure our site is as accessible as possible, we will still need to carry out manual tests, and I will cover these later.
First, I’m going to explain how I implemented automated accessibility tests on Elsevier’s ecommerce pages, and share some of the lessons I learnt along the way.
Picking the right tool
One of the hardest, but most important parts of creating our automated accessibility tests was choosing the right tool.
We began by investigating aXe CLI, but soon realised it wouldn’t fit our requirements. It couldn’t check pages that required a visitor to log in, so while we could test our product pages, we couldn’t test any customer account pages. Instead we moved over to Pa11y. Its beforeScript step meant we could log into the site and test pages such as the order history.
The example below shows the how the beforeScript step completes a login form and then waits for the login to complete before testing the page:
beforeScript: function(page, options, next) {
// An example function that can be used to make sure changes have been confirmed before continuing to run Pa11y
function waitUntil(condition, retries, waitOver) {
page.evaluate(condition, function(err, result) {
if (result || retries < 1) {
// Once the changes have taken place continue with Pa11y testing
waitOver();
} else {
retries -= 1;
setTimeout(function() {
waitUntil(condition, retries, waitOver);
}, 200);
}
});
}
// The script to manipulate the page must be run with page.evaluate to be run within the context of the page
page.evaluate(function() {
const user = document.querySelector('#login-form input[name="email"]');
const password = document.querySelector('#login-form input[name="password"]');
const submit = document.querySelector('#login-form input[name="submit"]');
user.value = 'user@example.com';
password.value = 'password';
submit.click();
}, function() {
// Use the waitUntil function to set the condition, number of retries and the callback
waitUntil(function() {
return window.location.href === 'https://example.com';
}, 20, next);
});
}
The waitUntil callback allows the test to be delayed until our test user is successfully logged in.
Another thing to consider when picking a tool is the type of error messages it produces. aXe groups all elements with the same error together, so the list of issues is a lot easier to read, and it’s easier to identify the most commons problems. For example, here are some elements that have insufficient colour contrast:
Violation of "color-contrast" with 8 occurrences!
Ensures the contrast between foreground and background colors meets
WCAG 2 AA contrast ratio thresholds. Correct invalid elements at:
- #maincontent > .make_your_mark > div:nth-child(2) > p > span > span
- #maincontent > .make_your_mark > div:nth-child(4) > p > span > span
- #maincontent > .inform_your_decisions > div:nth-child(2) > p > span > span
- #maincontent > .inform_your_decisions > div:nth-child(4) > p > span > span
- #maincontent > .inform_your_decisions > div:nth-child(6) > p > span > span
- #maincontent > .inform_your_decisions > div:nth-child(8) > p > span > span
- #maincontent > .inform_your_decisions > div:nth-child(10) > p > span > span
- #maincontent > .inform_your_decisions > div:nth-child(12) > p > span > span
For details, see: https://dequeuniversity.com/rules/axe/2.5/color-contrast
aXe also provides links to their site where they discuss the best way to fix the problem.
In comparison, Pa11y lists each individual error which can lead to a very verbose list. However, it does provide helpful suggestions of how to fix problems, such as suggesting an alternative shade of a colour to use:
• Error: This element has insufficient contrast at this conformance level.
Expected a contrast ratio of at least 4.5:1, but text in this element has a contrast ratio of 2.96:1.
Recommendation: change text colour to #767676.
⎣ WCAG2AA.Principle1.Guideline1_4.1_4_3.G18.Fail
⎣ #maincontent > div:nth-child(10) > div:nth-child(8) > p > span > span
⎣ <span style="color:#969696">Featured products:</span>
Integrating into our build pipeline
We decided the perfect time to run our accessibility tests would be alongside our end-to-end tests. We have a Jenkins job that detects changes to our staging site and then triggers the end-to-end tests, and in turn our accessibility tests. Our Jenkins job retrieves the contents of a GitHub repository containing our Pa11y script file and npm package manifest.
Once Jenkins has cloned the repository, it installs any dependencies and executes the tests via:
npm install && npm test
Bundling the URLs to be tested into our test script means we don’t have a command line style test where we list each URL we wish to test in the Jenkins CLI. It’s an effective method but can also be cluttered, and obscure which URLs are being tested.
In the middle of the office we have a monitor displaying a Jenkins dashboard and from this we can see if the accessibility tests are passing or failing. Everyone in the team has access to the Jenkins logs and when the build fails they can see why and fix the issue.
Fixing the issues
As mentioned earlier, Pa11y can generate a long list of areas for improvement which can be very verbose and quite overwhelming. I recommend going through the list to see which issues occur most frequently and fix those first. For example, we initially had a lot of errors around colour contrast, and one shade of grey in particular. By making this colour darker, the number of errors decreased, and we could focus on the remaining issues.
Another thing I like to do is to tackle the quick fixes, such as adding alt text to images. These are small things that allow us to make an impact instantly, giving us time to fix more detailed concerns such as addressing tabindex issues, or speaking to our designers about changing the contrast of elements on the site.
Manual testing
Adding automated tests to check our site for accessibility is great, but as I mentioned earlier, this can only cover 20-50% of potential issues. To improve on this, we need to test by hand too, either by ourselves or by asking others.
One way we can test our site is to throw our mouse or trackpad away and interact with the site using only a keyboard. This allows us to check items such as tab order, and ensure menu items, buttons etc. can be used without a mouse. The commands may be different on different operating systems, but there are some great guides online for learning more about these.
It’s tempting to add alt text and aria-labels to make errors go away, but if they don’t make any sense, what use are they really? Using a screenreader we can check that alt text accurately represents the image. This is also a great way to double check that our ARIA roles make sense, and that they correctly identify elements and how to interact with them. When testing our site with screen readers, it’s important to remember that not all screen readers are the same and some may interact with our site differently to others.
Consider asking a range of people with different needs and abilities to test your site, too. People experience the web in numerous ways, be they permanent, temporary or even situational. They may interact with your site in ways you hadn’t even thought about, so this is a good way to broaden your knowledge and awareness.
Tips and tricks
One of our main issues with Pa11y is that it may find issues we don’t have the power to solve. A perfect example of this is the one pixel image Facebook injects into our site. So, we wrote a small function to go though such errors and ignore the ones that we cannot fix.
const test = pa11y({
....
hideElements: '#ratings, #js-bigsearch',
...
});
const ignoreErrors: string[] = [
'<img src="https://books.google.com/intl/en/googlebooks/images/gbs_preview_button1.gif" border="0" style="cursor: pointer;" class="lightbox-is-image">',
'<script type="text/javascript" id="">var USI_orderID=google_tag_mana...</script>',
'<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=123456789012345&ev=PageView&noscript=1">'
];
const filterResult = result => {
if (ignoreErrors.indexOf(result.context) > -1) {
return false;
}
return true;
};
Initially we wanted to focus on fixing the major problems, so we added a rule to ignore notices and warnings. This made the list or errors much smaller and allowed us focus on fixing major issues such as colour contrast and missing alt text. The ignored notices and warnings can be added in later after these larger issues have been resolved.
const test = pa11y({
ignore: [
'notice',
'warning'
],
...
});
Jenkins gotchas
While using Jenkins we encountered a few problems. Sometimes Jenkins would indicate a build had passed when in reality it had failed. This was because Pa11y had timed out due to PhantomJS throwing an error, or the test didn’t go past the first URL. Pa11y has recently released a new beta version that uses headless Chrome instead of PhantomJS, so hopefully these issues will less occur less often.
We tried a few approaches to solve these issues. First we added error handling, iterating over the array of test URLs so that if an unexpected error happened, we could catch it and exit the process with an error indicating that the job had failed (using process.exit(1)).
for (const url of urls) {
try {
console.log(url);
let urlResult = await run(url);
urlResult = urlResult.filter(filterResult);
urlResult.forEach(result => console.log(result));
}
catch (e) {
console.log('Error:', e);
process.exit(1);
}
}
We also had issues with unhandled rejections sometimes caused by a session disconnecting or similar errors. To avoid Jenkins indicating our site was passing with 100% accessibility, when in reality it had not executed any tests, we instructed Jenkins to fail the job when an unhandled rejection or uncaught exception occurred:
process.on('unhandledRejection', (reason, p) => {
console.log('Unhandled Rejection at:', p, 'reason:', reason);
process.exit(1);
});
process.on('uncaughtException', (err) => {
console.log('Caught exception: ${err}n');
process.exit(1);
});
Now it’s your turn
That’s it! That’s how we automated accessibility testing for Elsevier ecommerce pages, allowing us to improve our site and make it more accessible for everyone. I hope our experience can help you automate accessibility tests on your own site, and bring the web a step closer to being accessible to all. |
2017 |
Seren Davies |
serendavies |
2017-12-07T00:00:00+00:00 |
https://24ways.org/2017/automating-your-accessibility-tests/ |
code |
| 212 |
Refactoring Your Way to a Design System |
I love refactoring code. Absolutely love it. There’s something about taking a piece of UI or a bit of code and reworking it in a way that is simpler, modular, and reusable that makes me incredibly happy.
I also love design systems work. It gives hybrids like me a home. It seems like everyone is talking about design systems right now. Design systems teams are perfect for those who enjoy doing architectural work and who straddle the line between designer and developer.
Una Kravets recently identified some of the reasons that design systems fail, and chief among them are lack of buy-in, underlying architecture, and communication. While it’s definitely easier to establish these before project work begins, that doesn’t mean it is the only path to success.
It’s a privilege to work on a greenfield project, and one that is not afforded to many. Companies with complex and/or legacy codebases may not be able to support a full rewrite of their product. In addition, many people feel overwhelmed at the thought of creating a complete system and are at a loss of how or where to even begin the process.
This is where refactoring comes into play.
According to Martin Fowler, “refactoring is the process of changing a software system in such a way that it does not alter the external behavior of the code yet improves its internal structure.” It’s largely invisible work, and if you do it right, the end user will never know the difference. What it will do is provide a decent foundation to begin more systematic work.
Build a solid foundation
When I was first asked to create Pantsuit, the design system for Hillary for America, I was tasked with changing our codebase to be more modular and scalable, without changing the behavior or visual design of the UI. We needed a system in place that would allow for the rapid creation of new projects while maintaining a consistent visual language. In essence, I was asked to refactor our code into a design system.
During that refactor, I focused the majority of my efforts on creating a scalable architecture based on the UI components in a single workflow. Since I needed to maintain a 1:1 parity with production, the only changes I could create were under-the-hood. I started with writing coding standards and deciding on a CSS architecture that I would then use as I rewrote sections of the codebase.
If you already have these in place, great! If not, then this is an excellent place to start. Even if your dream of a design system is never fully realized, having a coding philosophy and architecture in place will still have far-reaching benefits and implications.
I want to note that if your refactor includes creating new coding standards or a CSS architecture, don’t try to switch everything over right away. Instead, focus on a single new feature and isolate/encapsulate your work from the rest of the codebase.
Focus on the features
The key principle to cleaning up a complex codebase is to always refactor in the service of a feature.
— Max Kanat-Alexander
Refactoring for the sake of refactoring can easily lead to accusations of misused time and lack of results. Another danger of refactoring is that it can turn into yak-shaving if you aren’t disciplined in your approach. To that end, tying your refactored components to feature work is a great way to limit scope and reduce the rest of unintended changes.
For example, the initial work on Pantsuit focused only on components related to the donations flow. Every line of code I wrote was in service to improving the maintainability and modularity of that UI. Because we didn’t have any standards in place, I started with those. From there, I identified all the components present in every step of the donations flow, which included some type styles, buttons, form inputs and error states. Then came the refactor of each individual component. Finally, I reintegrated the newly refactored components into the existing donations flow and tested it against production, checking for visual and behavioral diffs. At the end of this process, I had the beginning of a design system that would grow to serve over 50 applications, and a case study to demonstrate its effectiveness.
Ideally, you’ll want to get buy-in from your stakeholders and product owners before you begin any design systems work. However, in the absence of buy-in, linking your work to new feature development is a good way to both limit the scope of your refactor and jump start component creation.
In addition, if you’re still trying to convince your team of the benefits of a design system, starting small and using the newly refactored, feature-driven work as a case study is one way showcase a design systems’ value. By providing a concrete example of how working towards a design system contributed to the project’s success, you’re gathering the data necessary to secure buy-in for a larger-scale effort. It’s a great way to show value, rather than just talking about it.
Show, don’t tell
Perhaps the most important thing you can do for any design system is to document it. The key is to create a frictionless way to keep the documentation up-to-date, otherwise no one will contribute to it, and in turn, it will become obsolete and useless.
There are lots of tools out there to help you get started documenting your new system. One of my favorites is KSS, which parses comments in the code and uses them to generate a style guide. For Pantsuit, I used the node version of KSS, along with a template to quickly spin up a documentation site.
I’ve listed just a few tools below; for even more, check out the tools sections of styleguides.io.
Fractal
Pattern Lab
Drizzle
Fabricator
Astrum
Catalog
Regardless of what tool you settle on, it needs to integrate well with your current workflow.
Conclusion: always be refactoring
If you’re not lucky enough to be able to start a new design system from scratch, you can start small and work on a single feature or component. With each new project comes a new opportunity to flesh out a new part of the system, and another potential case study to secure buy-in and showcase its value. Make sure to carefully and thoroughly document each new portion of the system as it’s built. After a few projects, you’ll find yourself with a decent start to a design system.
Good luck, and happy holidays!
Further reading:
Why Design Systems Fail
CSS Architecture for Design Systems
Refactoring: Improving the Design of Existing Code
Refactoring CSS: The Three I’s
Refactoring is About Features |
2017 |
Mina Markham |
minamarkham |
2017-12-23T00:00:00+00:00 |
https://24ways.org/2017/refactoring-your-way-to-a-design-system/ |
code |
| 213 |
Accessibility Through Semantic HTML |
Working on Better, a tracker blocker, I spend an awful lot of my time with my nose in other people’s page sources. I’m mostly there looking for harmful tracking scripts, but often notice the HTML on some of the world’s most popular sites is in a sad state of neglect.
What does neglected HTML look like? Here’s an example of the markup I found on a news site just yesterday. There’s a bit of text, a few links, and a few images. But mostly it’s div elements.
<div class="block_wrapper">
<div class="block_content">
<div class="box">
<div id="block1242235">
<div class="column">
<div class="column_content">
<a class="close" href="#"><i class="fa"></i></a>
</div>
<div class="btn account_login"></div>
Some text <span>more text</span>
</div>
</div>
</div>
</div>
</div>
divs and spans, why do we use them so much?
While I find tracking scripts completely inexcusable, I do understand why people write HTML like the above. As developers, we like to use divs and spans as they’re generic elements. They come with no associated default browser styles or behaviour except that div displays as a block, and span displays inline. If we make our page up out of divs and spans, we know we’ll have absolute control over styles and behaviour cross-browser, and we won’t need a CSS reset.
Absolute control may seem like an advantage, but there’s a greater benefit to less generic, more semantic elements. Browsers render semantic elements with their own distinct styles and behaviours. For example, button looks and behaves differently from a. And ul is different from ol. These defaults are shortcuts to a more usable and accessible web. They provide consistent and well-tested components for common interactions.
Semantic elements aid usability
A good example of how browser defaults can benefit the usability of an element is in the <select> option menu. In Safari on the desktop, the browser renders <select> as a popover-style menu. On a touchscreen, Safari overlays the same menu over the lower half of the screen as a “picker view.”
Option menu in Safari on macOS.
Option menu picker in Safari on iOS.
The iOS picker is a much better experience than struggling to pick from a complicated interface inside the page. The menu is shown more clearly than in the confined space on the page, which makes the options easier to read. The required swipe and tap gestures are consistent with the rest of the operating system, making the expected interaction easier to understand. The whole menu is scaled up, meaning the gestures don’t need such fine motor control. Good usability is good accessibility.
When we choose to use a div or span over a more semantic HTML element, we’re also doing hard work the browser could be doing for us. We don’t need to tie ourselves in knots making a custom div into a keyboard navigable option menu. Using select passes the bulk of the responsibility over to the browser.
Letting the browser do most of the work is also more future-friendly. More devices, with different expected interactions, will be released in the future. When that happens, the devices’ browsers can adapt our sites according to those interactions. Then we can spend our time doing something more fun than rewriting cross-browser JavaScript for each new device.
HTML’s impact on accessibility
Assistive technology also uses semantic HTML to understand how best to convey each element to its user.
For screen readers
Semantic HTML gives context to screen readers. Screen readers are a type of assistive technology that reads the content of the screen to the person using it. All sites have a linear page source. Sighted visitors can use visual cues on the page to navigate to their desired content in a non-linear fashion. As screen readers output audio (and sometimes braille), those visual cues aren’t usable in the same way.
Screen readers provide alternative means of navigation, enabling people to jump between different types of content, such as links, forms, headings, lists, and paragraphs. If all our content is marked up using divs and spans, we’re not giving screen readers a chance to index the valuable content.
For keyboard navigation
Keyboard-only navigation is also aided by semantic HTML. Forms, option menus, navigation, video, and audio are particularly hard for people relying on a keyboard to access. For instance, option menus and navigation can be very fiddly if you need to use a mouse to hover a menu open and move to select the desired item at the same time.
Again, we can leave much of the interaction to the browser through semantic HTML. Semantic form elements can convey if a check box has been checked, or which label is associated with which input field. These default behaviours can make the difference between a person being able to use a form or leaving the site out of frustration.
Did I convince you yet? I hope so. Let’s finish with some easy guidelines to follow.
1. Use the most semantic HTML element for the job
When you reach for a div, first check if there’s a better element to do the job. What is the role of that element? How should a person be interacting with the element?
Are you using class names like nav, header, or main? There are HTML5 elements for those sections! Using specific elements can also make writing CSS simpler, and ensure a consistent design with minimal effort.
2. Separate structure and style
Don’t choose HTML elements based on how they’re styled in your CSS. Nowadays, common practice is to use class names rather than elements for CSS selectors. You’re unlikely to wrap all your page content in an <h1> element because you want all the text to be big and bold. Still, it can be easy to choose an HTML element because it will be the easiest to style. Focusing on content without style will help us choose the most semantic HTML element without that temptation. For example, you could add a class of .btn to a div to make it look like a button. But we all know that only a button will really behave like a button.
3. Use progressive enhancement for enhanced functionality
Airbnb and Groupon recently proved we’re not past the laziness of “this site only works in X browser.” Baffling disregard for the open web aside, making complex interactive experiences work cross-browser and cross-device is not easy. We can use progressive enhancement to layer fancy or unsupported features on top of a baseline “it works” experience.
We should build the baseline experience on a foundation of accessible, semantic HTML. Then, if you really want to add a specific feature for a proprietary browser, you can layer that on top, without breaking the underlying experience.
4. Test your work
Validators are always valuable for checking the browser will be able to correctly interpret your markup. Document outline checkers can be valuable for testing your structure, but be aware that the HTML5 document outline is not actually implemented in browsers.
Once you’ve got something resembling a web page, test the experience! Ensure that semantic HTML element you chose looks and behaves in a predictable manner consistent with its use across the web. Test cross-browser, test cross-device, and test with assistive technology. Testing with assistive technology is not as expensive as it used to be, you can even use your smartphone for testing on iOS and Android. Your visitors will thank you!
Further reading
Accessibility For Everyone by Laura Kalbag
HTML5 Doctor
HTML5 Accessibility
An overview of HTML5 Semantics
HTML reference on MDN
Heydon Pickering’s Inclusive Design Checklist
The Paciello Group’s Inclusive Design Principles |
2017 |
Laura Kalbag |
laurakalbag |
2017-12-15T00:00:00+00:00 |
https://24ways.org/2017/accessibility-through-semantic-html/ |
code |
| 214 |
Christmas Gifts for Your Future Self: Testing the Web Platform |
In the last year I became a CSS specification editor, on a mission to revitalise CSS Multi-column layout. This has involved learning about many things, one of which has been the Web Platform Tests project. In this article, I’m going to share what I’ve learned about testing the web platform. I’m also going to explain why I think you might want to get involved too.
Why test?
At one time or another it is likely that you have been frustrated by an issue where you wrote some valid CSS, and one browser did one thing with it and another something else entirely. Experiences like this make many web developers feel that browser vendors don’t work together, or they are actively doing things in a different way to one another to the detriment of those of us who use the platform. You’ll be glad to know that isn’t the case, and that the people who work on browsers want things to be consistent just as much as we do. It turns out however that interoperability, which is the official term for “works in all browsers”, is hard.
Thanks to web-platform-tests, a test from another browser vendor just found genuine bug in our code before we shipped 😻— Brian Birtles (@brianskold) February 10, 2017
In order for W3C Specifications to move on to become W3C Recommendations we need to have interoperable implementations.
6.2.4 Implementation Experience
Implementation experience is required to show that a specification is sufficiently clear, complete, and relevant to market needs, to ensure that independent interoperable implementations of each feature of the specification will be realized. While no exhaustive list of requirements is provided here, when assessing that there is adequate implementation experience the Director will consider (though not be limited to):
is each feature of the current specification implemented, and how is this demonstrated?
are there independent interoperable implementations of the current specification?
are there implementations created by people other than the authors of the specification?
are implementations publicly deployed?
is there implementation experience at all levels of the specification’s ecosystem (authoring, consuming, publishing…)?
are there reports of difficulties or problems with implementation?
https://www.w3.org/2017/Process-20170301/#transition-reqs
We all want interoperability, achieving interoperability is part of the standards process. The next question is, how do we make sure that we get it?
Unimplemented vs uninteroperable implementations
Before looking at how we can try to improve interoperability, I’d like to look at the reasons we don’t always meet that aim. There are a couple of reasons why browser X is not doing the same thing as browser Y.
The first reason is that browser X has not implemented that feature yet. Relatively small teams of people work on browser engines, and their resources are spread as thinly as those of any company. Behind those browsers are business or organisational goals which may not match our desire for a shiny feature to be made available. There are ways in which we as the web community can help gently encourage implementations - by requesting the feature, by using it so it shows up in usage reports, or writing about it to show interest. However, there will always be some degree of lag based on priorities.
A browser not supporting a feature at all, is reasonably easy to deal with these days. We can test for support with Feature Queries, and create sensible fallbacks. What is harder to deal with is when a feature is implemented in different ways by different browsers. In that situation you use the feature, perhaps referring to the specification to ensure that you are writing your CSS correctly. It looks exactly as you expect in one browser and it’s all broken when you test in another.
A frequent cause of this kind of issue is that the specification is not well defined in a particular area or that the specification has changed since one or other browser implemented it. CSS specifications are not developed in a darkened room, then presented to browser vendors to implement as a completed document. It would be nice if it worked like that, however the web platform is a gnarly thing. Before we can be sure that a specification is correct, it needs implementing in order that we can get the interoperable implementations I described earlier. A circular process has to happen. Specifications have to be written, browsers have to implement and find the problems, and then the specification has to be revised.
Many people reading this will be familiar with how flexbox changed three times in browsers, leaving us with a mess of incompatibilities and the need to use at least two versions of the spec. This story was an example of this circular process, in this case the specification was flagged as experimental using vendor prefixes. We had become used to using vendor prefixes in production and early adopters of flexbox were bitten by this. Today, specifications are developed behind experimental flags as we saw with CSS Grid Layout. Yet there has to come a time when implementations ship, and remove those flags, and it may be that knowingly or unknowingly some interop issues slip through.
You will know these interop issues as “browser bugs”, perhaps you have even reported one (thank you!) and none of us want them, so how do we make the platform as robust as possible?
How do we ensure we have interoperability?
If you were working on a large web application, with several people committing code, it would be very easy for one person to make a change that inadvertently broke some part of the application. They might not realise the fact that their change would cause a problem, due to not having a complete understanding of the entire codebase. To prevent this from happening, it is accepted good practice to write tests as well as code. The tests can then be run before the application is deployed.
Unless you start out from the beginning writing tests, and are very good at writing a test for every bit of code, it is likely that some issues do slip through from time to time. When this happens, a good approach is to not only fix the issue but also to write a test that would stop it ever happening again. That way the test suite improves over time and hopefully fewer issues happen.
The web platform is essentially a giant, sprawling application, with a huge range of people working on it in different ways. There is therefore plenty of opportunity for issues to creep in, so it seems like having some way of writing tests and automating those tests on browsers would be a good thing. That, is what the Web Platform Tests project has set out to achieve.
Web Platform Tests
Web Platform Tests is the test suite for the web platform. It is set of tests for all parts of the web platform, which can be run in any browser and the results reported. This article mostly discusses CSS tests, because I work on CSS. You will find that there are tests covering the full platform, and you can look into whichever area you have the most interest and experience in.
If we want to create a test suite for a CSS specification then we need to ensure that every feature of the specification has a related test. If a change is made to the spec, and a test committed that reflects that change, then it should be straightforward to run that test against each browser and see if it passes.
Currently, at the CSS Working Group, specifications that are at Candidate Recommendation Status should commit at test with every normative change to the spec. To explain the terminology, a normative change is one that changes some of the normative text of a specification - text that contains instructions as to how a browser should render a certain thing. A Candidate Recommendation is the status at which the Working Group officially request implementations of the spec, therefore it is reasonable to assume that any change may cause an interoperability issue. It is usually the case that representatives from all browsers will have discussed the change, so anyone who needs to change code will be aware. In this case the test allows them to check that their change passes and matches everyone else. Tests would also highlight the situation where a change to the spec caused an issue in a browser that otherwise wouldn’t be aware if it. Just as a test suite for your web application should alert a person committing code, that their change will cause a problem elsewhere.
Discovering the tests
I’ve found that the more I have understood the effort that goes into interoperability, and the reasons why creating an interoperable web is so hard, running into browser issues has become less frustrating. I have somewhere to go, even if all I can do is log the bug.
If you are even slightly interested in the subject, go have a poke around wpt.fyi. You can explore the various parts of the web platform and see how many tests have been committed. All the the CSS tests are under the directory /css where you will find each specification. Find a specification you are interested in, and look at the tests. Each test has a link to run it in your own browser to see if it passes. This can be useful in itself, if you are battling with an issue and have reduced it down to something specific, you can go and look to see if there is a test covering that and whether it appears to pass or fail in the browser you are battling with. If it turns out that the test fails, it’s probably not you!
A test on the wpt.fyi dashboard
Note: In some tests you will come across mention of a font called Ahem. This is a font designed for testing which contains consistent glyphs. You can read about how to use the font and download it here.
Contributing to Web Platform Tests
You can also become involved with Web Platform Tests. People often ask me how they can become involved in CSS, and I can think of no better way than by writing tests. You need to really understand a feature to accurately come up with a method of testing if it works or not in the different engines. This is not glamorous work, it is however a very useful thing to be involved with.
In addition to helping yourself, and developing the sort of deep knowledge of the platform that enables contribution, you will really help the progress of specifications. There are only a very few people writing specs. If those people also have to write and review all of the tests it slows down their work. If you want a better, more interoperable web, and to massively improve your ability to have nerdy conversations about highly specific things, testing is the place to start.
A local testing setup
Your first stop should be to visit the home of Web Platform Tests. There is some documentation here, which does tend to assume you know about the tests and what you are looking for - having read this article you know as much as I do. To be able to work on tests you will want to:
Clone the WPT repo, this is where all the tests are stored
Install some tools so you can run up a local copy of the tests
The instructions on the Readme in the repo should get you up and running, you can then load your own version of the test suite in a browser at http://web-platform-test:8000, or whichever port you set up.
Running tests locally
Finding things to test
It’s currently not straightforward to locate low-hanging fruit in order to start committing tests. There are some issues flagged up as a good first issue in the GitHub repo, if any of those match your interest and knowledge. Otherwise, a good place to start is where you know of existing interoperability issues. If you are aware of a browser bug, have a look and see if there is a test that addresses it. If not, then a test highlights the interoperability issue, and if it is an issue that you are running into means that you have a nice way to see if it has been fixed!
Talk to people
There is an IRC channel at irc://irc.w3.org:6667/testing, where you will find people who are writing tests as well as people who are working on the test suite framework itself. They have always been very friendly, and are likely to welcome people with a real interest in creating tests.
Gathering information
First you need to read the spec. To be able to create a test you need to know and to understand what the specification says should be happening. As I mentioned, writing tests will improve your knowledge dramatically! In general I find that web developers assume their favourite browser has got it right, this isn’t about right or wrong however, or good browsers versus bad ones. The browser with the incorrect implementation may have had a perfect, as per the spec implementation, until something changed. Do some investigation and work out what the spec says, and which – if any – browser is doing it correctly.
Another good place to look when trying to create a test for an interop issue, is to look at the browser issue trackers. It is quite likely that someone has already logged the issue, and detailed what it is, and even which browsers are as per the spec. This is useful information, as you then have a clue as to which browsers should pass your test. Remember to check version numbers - an issue may well be fixed in a pre-release version of Chrome for example, but not in the public release.
Edge Issue Tracker
Mozilla Issue Tracker
WebKit Issue Tracker
Chromium Issue Tracker
Writing the test
If you’ve ever created a Reduced Test Case to isolate a browser issue, you already have some idea of what we are trying to do with a test. We want to test one thing, in isolation, and to be able to confirm “yes this works as per the spec” or “no, this does not”.
The main two types of test are:
testharness.js tests
reftests
The testharness.js tests use JavaScript to test an assertion, this framework is designed as a way to test Web APIs and as this quickly gets fairly complicated - and I’m a complete beginner myself at writing these - I’ll refer you to the excellent tutorial Using testharness.js.
Many CSS tests will be reftests. A reftest involves getting two pages to lay out in the same way, so that they are visually the same. For example, you can find a reftest for Grid Layout at:https://w3c-test.org/css/css-grid/alignment/grid-gutters-001.html or at http://web-platform.test:8000/css/css-grid/alignment/grid-gutters-001.html if you have run up your own copy of WPT.
<!DOCTYPE html>
<meta charset="utf-8">
<title>CSS Grid Layout Test: Support for gap shorthand property of row-gap and column-gap</title>
<link rel="help" href="https://www.w3.org/TR/css-grid-1/#gutters">
<link rel="help" href="https://www.w3.org/TR/css-align-3/#gap-shorthand">
<link rel="match" href="../reference/grid-equal-gutters-ref.html">
<link rel="author" title="Rachel Andrew" href="mailto:me@rachelandrew.co.uk">
<style>
#grid {
display: grid;
width:200px;
gap: 20px;
grid-template-columns: 90px 90px;
grid-template-rows: 90px 90px;
background-color: green;
}
#grid > div {
background-color: silver;
}
</style>
<p>The test passes if it has the same visual effect as reference.</p>
<div id="grid">
<div></div>
<div></div>
<div></div>
<div></div>
</div>
I am testing the new gap property (renamed grid-gap). The reference file can be found by looking for the line:
<link rel="match" href="../reference/grid-equal-gutters-ref.html">
In that file, I am using absolute positioning to mock up the way the file would look if gap is implemented correctly.
<!DOCTYPE html>
<meta charset="utf-8">
<title>CSS Grid Layout Reference: a square with a green cross</title>
<link rel="author" title="Rachel Andrew" href="mailto:me@rachelandrew.co.uk" />
<style>
#grid {
width:200px;
height: 200px;
background-color: green;
position: relative;
}
#grid > div {
background-color: silver;
width: 90px;
height: 90px;
position: absolute;
}
#grid :nth-child(1) {
top: 0;
left: 0;
}
#grid :nth-child(2) {
top: 0;
left: 110px;
}
#grid :nth-child(3) {
top: 110px;
left: 0;
}
#grid :nth-child(4) {
top: 110px;
left: 110px;
}
</style>
<div id="grid">
<div></div>
<div></div>
<div></div>
<div></div>
</div>
The tests are compared in an automated way by taking screenshots of the test and reference.
These are relatively simple tests to write, you will find the work is not in writing the test however. The work is really in doing the research, and making sure you understand what is supposed to happen so you can write the test. Which is why, if you really want to get your hands dirty in the web platform, this is a good place to start.
Committing a test
Once you have written a test you can run the lint tool to make sure that everything is tidy. This tool is run automatically after you submit your pull request, and reviewers won’t accept a test with lint errors, so do this locally first to catch anything obvious.
Tests are added as a pull request, once you have your test ready to go you can create a pull request to add it to the repository. Your test will be tested and it will then wait for a review.
You may well then find yourself in a bit of a waiting game, as the test needs to be reviewed. How long that takes will depend on how active work is on that spec. People who are in the OWNERS file for that spec should be notified. You can always ask in IRC to see if someone is available who can look at and potentially merge your test.
Usually the reviewer will have some comments as to how the test can be improved, in the same as the owner of an open source project you submit a PR to might ask you to change some things. Work with them to make your test as good as it can be, the things you learn on the first test you submit will make future ones easier. You can then bask in the glow of knowing you have done something towards the aim of a more interoperable web for all of us.
Christmas gifts for your future self
I have been a web developer for over 20 years. I have no idea what the web platform will look like in 20 more years, but for as long as I’m working on it I’ll keep on trying to make it better. Making the web more interoperable makes it a better place to be a web developer, storing up some Christmas gifts for my future self, while learning new things as I do so.
Resources
I rounded up everything I could find on WPT while researching this article. As well as some other links that might be helpful for you. These links are below. Happy testing!
Web Platform Tests
Using testharness.js
IRC Channel irc://irc.w3.org:6667/testing
Edge Issue Tracker
Mozilla Issue Tracker
WebKit Issue Tracker
Chromium Issue Tracker
Reducing an Issue - guide to created a reduced test case
Effectively Using Web Platform Tests: Slides and Video
An excellent walkthrough from Lyza Gardner on her working on tests for the HTML specification - Moving Targets: a case study on testing web standards.
Improving interop with web-platform-tests: Slides and Video |
2017 |
Rachel Andrew |
rachelandrew |
2017-12-10T00:00:00+00:00 |
https://24ways.org/2017/testing-the-web-platform/ |
code |
| 215 |
Teach the CLI to Talk Back |
The CLI is a daunting tool. It’s quick, powerful, but it’s also incredibly easy to screw things up in – either with a mistyped command, or a correctly typed command used at the wrong moment. This puts a lot of people off using it, but it doesn’t have to be this way.
If you’ve ever interacted with Slack’s Slackbot to set a reminder or ask a question, you’re basically using a command line interface, but it feels more like having a conversation. (My favourite Slack app is Lunch Train which helps with the thankless task of herding colleagues to a particular lunch venue on time.)
Same goes with voice-operated assistants like Alexa, Siri and Google Home. There are even games, like Lifeline, where you interact with a stranded astronaut via pseudo SMS, and KOMRAD where you chat with a Soviet AI.
I’m not aiming to build an AI here – my aspirations are a little more down to earth. What I’d like is to make the CLI a friendlier, more forgiving, and more intuitive tool for new or reluctant users. I want to teach it to talk back.
Interactive command lines in the wild
If you’ve used dev tools in the command line, you’ve probably already used an interactive prompt – something that asks you questions and responds based on your answers. Here are some examples:
Yeoman
If you have Yeoman globally installed, running yo will start a command prompt.
The prompt asks you what you’d like to do, and gives you options with how to proceed. Seasoned users will run specific commands for these options rather than go through this prompt, but it’s a nice way to start someone off with using the tool.
npm
If you’re a Node.js developer, you’re probably familiar with typing npm init to initialise a project. This brings up prompts that will populate a package.json manifest file for that project.
The alternative would be to expect the user to craft their own package.json, which is more error-prone since it’s in JSON format, so something as trivial as an extraneous comma can throw an error.
Snyk
Snyk is a dev tool that checks for known vulnerabilities in your dependencies. Running snyk wizard in the CLI brings up a list of all the known vulnerabilities, and gives you options on how to deal with it – such as patching the issue, applying a fix by upgrading the problematic dependency, or ignoring the issue (you are then prompted for a reason).
These decisions get mapped to the manifest and a .snyk file, and committed into the repo so that the settings are the same for everyone who uses that project.
I work at Snyk, and running the wizard is what made me think about building my own personal assistant in the command line to help me with some boring, repetitive tasks.
Writing your own
Something I do a lot is add bookmarks to styleguides.io – I pull down the entire repo, copy and paste a template YAML file, and edit to contents. Sometimes I get it wrong and break the site. So I’ve been putting together a tool to help me add bookmarks.
It’s called bookmarkbot – it’s a personal assistant squirrel called Mark who will collect and bury your bookmarks for safekeeping.*
*Fortunately, this metaphor also gives me a charming excuse for any situation where bookmarks sometimes get lost – it’s not my poorly-written code, honest, it’s just being realistic because sometimes squirrels forget where they buried things!
When you run bookmarkbot, it will ask you for some information, and save that information as a Markdown file in YAML format.
For this demo, I’m going to use a Node.js package called inquirer, which is a well supported tool for creating command line prompts. I like it because it has a bunch of different question types; from input, which asks for some text back, confirm which expects a yes/no response, or a list which gives you a set of options to choose from. You can even nest questions, Choose Your Own Adventure style.
Prerequisites
Node.js
npm
RubyGems (Only if you want to go as far as serving a static site for your bookmarks, and you want to use Jekyll for it)
Disclaimer
Bear in mind that this is a really simplified walkthrough. It doesn’t have any error states, and it doesn’t handle the situation where we save a file with the same name. But it gets you in a good place to start building out your tool.
Let’s go!
Create a new folder wherever you keep your projects, and give it an awesome name (I’ve called mine bookmarks and put it in the Sites directory because I’m unimaginative). Now cd to that directory.
cd Sites/bookmarks
Let’s use that example I gave earlier, the trusty npm init.
npm init
Pop in the information you’d like to provide, or hit ENTER to skip through and save the defaults. Your directory should now have a package.json file in it. Now let’s install some of the dependencies we’ll need.
npm install --save inquirer
npm install --save slugify
Next, add the following snippet to your package.json to tell it to run this file when you run npm start.
"scripts": {
…
"start": "node index.js"
}
That index.js file doesn’t exist yet, so let’s create it in the root of our folder, and add the following:
// Packages we need
var fs = require('fs'); // Creates our file (part of Node.js so doesn't need installing)
var inquirer = require('inquirer'); // The engine for our questions prompt
var slugify = require('slugify'); // Will turn a string into a usable filename
// The questions
var questions = [
{
type: 'input',
name: 'name',
message: 'What is your name?',
},
];
// The questions prompt
function askQuestions() {
// Ask questions
inquirer.prompt(questions).then(answers => {
// Things we'll need to generate the output
var name = answers.name;
// Finished asking questions, show the output
console.log('Hello ' + name + '!');
});
}
// Kick off the questions prompt
askQuestions();
This is just some barebones where we’re including the inquirer package we installed earlier. I’ve stored the questions in a variable, and the askQuestions function will prompt the user for their name, and then print “Hello <your name>” in the console.
Enough setup, let’s see some magic. Save the file, go back to the command line and run npm start.
Extending what we’ve learnt
At the moment, we’re just saving a name to a file, which isn’t really achieving our goal of saving bookmarks. We don’t want our tool to forget our information every time we talk to it – we need to save it somewhere. So I’m going to add a little function to write the output to a file.
Saving to a file
Create a folder in your project’s directory called _bookmarks. This is where the bookmarks will be saved.
I’ve replaced my questions array, and instead of asking for a name, I’ve extended out the questions, asking to be provided with a link and title (as a regular input type), a list of tags (using inquirer’s checkbox type), and finally a description, again, using the input type.
So this is how my code looks now:
// Packages we need
var fs = require('fs'); // Creates our file
var inquirer = require('inquirer'); // The engine for our questions prompt
var slugify = require('slugify'); // Will turn a string into a usable filename
// The questions
var questions = [
{
type: 'input',
name: 'link',
message: 'What is the url?',
},
{
type: 'input',
name: 'title',
message: 'What is the title?',
},
{
type: 'checkbox',
name: 'tags',
message: 'Would you like me to add any tags?',
choices: [
{ name: 'frontend' },
{ name: 'backend' },
{ name: 'security' },
{ name: 'design' },
{ name: 'process' },
{ name: 'business' },
],
},
{
type: 'input',
name: 'description',
message: 'How about a description?',
},
];
// The questions prompt
function askQuestions() {
// Say hello
console.log('🐿 Oh, hello! Found something you want me to bookmark?\n');
// Ask questions
inquirer.prompt(questions).then((answers) => {
// Things we'll need to generate the output
var title = answers.title;
var link = answers.link;
var tags = answers.tags + '';
var description = answers.description;
var output = '---\n' +
'title: "' + title + '"\n' +
'link: "' + link + '"\n' +
'tags: [' + tags + ']\n' +
'---\n' + description + '\n';
// Finished asking questions, show the output
console.log('\n🐿 All done! Here is what I\'ve written down:\n');
console.log(output);
// Things we'll need to generate the filename
var slug = slugify(title);
var filename = '_bookmarks/' + slug + '.md';
// Write the file
fs.writeFile(filename, output, function () {
console.log('\n🐿 Great! I have saved your bookmark to ' + filename);
});
});
}
// Kick off the questions prompt
askQuestions();
The output is formatted into YAML metadata as a Markdown file, which will allow us to turn it into a static HTML file using a build tool later. Run npm start again and have a look at the file it outputs.
Getting confirmation
Before the user makes critical changes, it’s good to verify those changes first. We’re going to add a confirmation step to our tool, before writing the file. More seasoned CLI users may favour speed over a “hey, can you wait a sec and just check this is all ok” step, but I always think it’s worth adding one so you can occasionally save someone’s butt.
So, underneath our questions array, let’s add a confirmation array.
// Packages we need
…
// The questions
…
// Confirmation questions
var confirm = [
{
type: 'confirm',
name: 'confirm',
message: 'Does this look good?',
},
];
// The questions prompt
…
As we’re adding the confirm step before the file gets written, we’ll need to add the following inside the askQuestions function:
// The questions prompt
function askQuestions() {
// Say hello
…
// Ask questions
inquirer.prompt(questions).then((answers) => {
…
// Things we'll need to generate the output
…
// Finished asking questions, show the output
…
// Confirm output is correct
inquirer.prompt(confirm).then(answers => {
// Things we'll need to generate the filename
var slug = slugify(title);
var filename = '_bookmarks/' + slug + '.md';
if (answers.confirm) {
// Save output into file
fs.writeFile(filename, output, function () {
console.log('\n🐿 Great! I have saved your bookmark to ' +
filename);
});
} else {
// Ask the questions again
console.log('\n🐿 Oops, let\'s try again!\n');
askQuestions();
}
});
});
}
// Kick off the questions prompt
askQuestions();
Now run npm start and give it a go!
Typing y will write the file, and n will take you back to the start. Ideally, I’d store the answers already given as defaults so the user doesn’t have to start from scratch, but I want to keep this demo simple.
Serving the files
Now that your bookmarking tool is successfully saving formatted Markdown files to a folder, the next step is to serve those files in a way that lets you share them online. The easiest way to do this is to use a static-site generator to convert your YAML files into HTML, and pop them all on one page. Now, you’ve got a few options here and I don’t want to force you down any particular path, as there are plenty out there – it’s just a case of using the one you’re most comfortable with.
I personally favour Jekyll because of its tight integration with GitHub Pages – I don’t want to mess around with hosting and deployment, so it’s really handy to have my bookmarks publish themselves on my site as soon as I commit and push them using Git.
I’ll give you a very brief run-through of how I’m doing this with bookmarkbot, but I recommend you read my Get Started With GitHub Pages (Plus Bonus Jekyll) guide if you’re unfamiliar with them, because I’ll be glossing over some bits that are already covered in there.
Setting up a build tool
If you haven’t already, install Jekyll and Bundler globally through RubyGems. Jekyll is our static-site generator, and Bundler is what we use to install Ruby dependencies.
gem install jekyll bundler
In my project folder, I’m going to run the following which will install the Jekyll files we’ll need to build our listing page. I’m using --force, otherwise it will complain that the directory isn’t empty.
jekyll new . --force
If you check your project folder, you’ll see a bunch of new files. Now run the following to start the server:
bundle exec jekyll serve
This will build a new directory called _site. This is where your static HTML files have been generated. Don’t touch anything in this folder because it will get overwritten the next time you build.
Now that serve is running, go to http://127.0.0.1:4000/ and you’ll see the default Jekyll page and know that things are set up right. Now, instead, we want to see our list of bookmarks that are saved in the _bookmarks directory (make sure you’ve got a few saved). So let’s get that set up next.
Open up the _config.yml file that Jekyll added earlier. In here, we’re going to tell it about our bookmarks. Replace everything in your _config.yml file with the following:
title: My Bookmarks
description: These are some of my favourite articles about the web.
markdown: kramdown
baseurl: /bookmarks # This needs to be the same name as whatever you call your repo on GitHub.
collections:
- bookmarks
This will make Jekyll aware of our _bookmarks folder so that we can call it later. Next, create a new directory and file at _layouts/home.html and paste in the following.
<!doctype html>
<html lang="en">
<head>
<meta charset="UTF-8" />
<title>{{site.title}}</title>
<meta name="description" content="{{site.description}}">
</head>
<body>
<h1>{{site.title}}</h1>
<p>{{site.description}}</p>
<ul>
{% for bookmark in site.bookmarks %}
<li>
<a href="{{bookmark.link}}">
<h2>{{bookmark.title}}</h2>
</a>
{{bookmark.content}}
{% if bookmark.tags %}
<ul>
{% for tags in bookmark.tags %}<li>{{tags}}</li>{% endfor %}
</ul>
{% endif %}
</li>
{% endfor %}
</ul>
</body>
</html>
Restart Jekyll for your config changes to kick in, and go to the url it provides you (probably http://127.0.0.1:4000/bookmarks, unless you gave something different as your baseurl).
It’s a decent start – there’s a lot more we can do in this area but now we’ve got a nice list of all our bookmarks, let’s get it online!
If you want to use GitHub Pages to host your files, your first step is to push your project to GitHub. Go to your repository and click “settings”. Scroll down to the section labelled “GitHub Pages”, and from here you can enable it. Select your master branch, and it will provide you with a url to view your published pages.
What next?
Now that you’ve got a framework in place for publishing bookmarks, you can really go to town on your listing page and make it your own. First thing you’ll probably want to do is add some CSS, then when you’ve added a bunch of bookmarks, you’ll probably want to have some filtering in place for the tags, perhaps extend the types of questions that you ask to include an image (if you’re feeling extra-fancy, you could just ask for a url and pull in metadata from the site itself). Maybe you’ve got an idea that doesn’t involve bookmarks at all.
You could use what you’ve learnt to build a place where you can share quotes, a list of your favourite restaurants, or even Christmas gift ideas.
Here’s one I made earlier
My demo, bookmarkbot, is on GitHub, and I’ve reused a lot of the code from styleguides.io. Feel free to grab bits of code from there, and do share what you end up making! |
2017 |
Anna Debenham |
annadebenham |
2017-12-11T00:00:00+00:00 |
https://24ways.org/2017/teach-the-cli-to-talk-back/ |
code |
| 216 |
Styling Components - Typed CSS With Stylable |
There’s been a lot of debate recently about how best to style components for web apps so that styles don’t accidentally ‘leak’ out of the component they’re meant for, or clash with other styles on the page.
Elaborate CSS conventions have sprung up, such as OOCSS, SMACSS, BEM, ITCSS, and ECSS. These work well, but they are methodologies, and require everyone in the team to know them and follow them, which can be a difficult undertaking across large or distributed teams.
Others just give up on CSS and put all their styles in JavaScript. Now, I’m not bashing JS, especially so close to its 22nd birthday, but CSS-in-JS has problems of its own. Browsers have 20 years experience in optimising their CSS engines, so JavaScript won’t be as fast as using real CSS, and in any case, this requires waiting for JS to download, parse, execute then render the styles.
There’s another problem with CSS-in-JS, too. Since Responsive Web Design hit the streets, most designers no longer make comps in Photoshop or its equivalents; instead, they write CSS. Why hire an expensive design professional and require them to learn a new way of doing their job?
A recent thread on Twitter asked “What’s your biggest gripe with CSS-in-JS?”, and the replies were illuminating: “Always having to remember to camelCase properties then spending 10min pulling hair out when you do forget”, “the cryptic domain-specific languages that each of the frameworks do just ever so slightly differently”, “When I test look and feel in browser, then I copy paste from inspector, only to have to re-write it as a JSON object”, “Lack of linting, autocomplete, and css plug-ins for colors/ incrementing/ etc”.
If you’re a developer, and you’re still unconvinced, I challenge you to let designers change the font in your IDE to Zapf Chancery and choose a new colour scheme, simply because they like it better. Does that sound like fun? Will that boost your productivity? Thought not.
Some chums at Wix Engineering and I wanted to see if we could square this circle. Wix-hosted sites have always used CSS-in-JS (the concept isn’t new; it was in Netscape 4!) but that was causing performance problems. Could we somehow devise a method of extending CSS (like SASS and LESS do) that gives us styles that are guaranteed not to leak or clash, that is compatible with code editors’ autocompletion, and which could be pre-processed at build time to valid, cross-browser, static CSS?
After a few months and a few proofs of concept later (drumroll), yes – we could! We call it Stylable.
Introducing Stylable
Stylable is a CSS pre-processor, like SASS or LESS. It uses CSS syntax so all your development tools will work. At build time, the Stylable CSS extensions are transpiled to flat, valid, cross-browser vanilla CSS for maximum performance. There’s quite a bit to it, and this is a short article, so let’s look at the basic concepts.
Components all the way down
Stylable is designed for component-based systems. Imagine you have a Gallery component. Within that, there is a Navigation component (for example, containing a ‘next’, ‘previous’, ‘show all thumbnails’, and ‘show all albums’ controls), and within that there are NavButton components. Each component is discrete, used elsewhere in the system in different contexts, perhaps maintained by different team members or even different organisations — you can use Stylable to add a typed interface to non-Stylable component libraries, as well as using it to build an app from scratch.
Firstly, Stylable will automatically namespace styles so they only apply inside that component, by rewriting them at build time with a unique (but human-readable) prefix. So, for example,
<div className="jingle bells" /> might be re-written as <div class="header183--jingle header183--bells"></div>.
So far, so BEM-like (albeit without the headache of remembering a convention). But what else can it do?
Custom pseudo-elements
An important feature of Stylable is the ability to reach into a component and style it from the outside, without having to know about its internal structure. Let’s see the guts of a simple JSX button component in the file button.jsx:
render () {
return (
<button>
<span className="icon" />
<span className="label">Submit</span>
</button>
);
}
(Note:className is the JSX way of setting a class on an element; this example uses React, but Stylable itself is framework-agnostic.)
I style it using a Stylable stylesheet (the .st.css suffix tells the preprocessor to process this file):
/* button.st.css */
/* note that the root class is automatically placed on the root HTML
element by Stylable React integration */
.root {
background: #b0e0e6;
}
.icon {
display: block;
height: 2em;
background-image: url('./assets/btnIcon.svg');
}
.label {
font-size: 1.2em;
color: rgba(81, 12, 68, 1.0);
}
Note that Stylable allows all the CSS that you know and love to be included. As Drew Powers wrote in his review:
with Stylable, you get CSS, and every part of CSS. This seems like a “duh” observation, but this is significant if you’ve ever battled with a CSS-in-JS framework over a lost or “hacky” implementation of a basic CSS feature.
I can import my Button component into another component - this time, panel.jsx:
/* panel.jsx */
import * as React from 'react';
import {properties, stylable} from 'wix-react-tools';
import {Button} from '../button';
import style from './panel.st.css';
export const Panel = stylable(style)(() => (
<div>
<Button className="cancelBtn" />
</div>
));
In panel.st.css:
/* panel.st.css */
:import {
-st-from: './button.st.css';
-st-default: Button;
}
/* cancelBtn is of type Button */
.cancelBtn {
-st-extends: Button;
background: cornflowerblue;
}
/* targets the label of <Button className="cancelBtn" /> */
.cancelBtn::label {
color: honeydew;
font-weight: bold;
}
Here, we’re reaching into the Button component from the Panel component. Buttons that are not inside a Panel won’t be affected.
We do this by extending the CSS concept of pseudo-elements. As MDN says “A CSS pseudo-element is a keyword added to a selector that lets you style a specific part of the selected element(s)”. We don’t use a descendant selector because the label isn’t part of the Panel component, it’s part of the Button component.
This syntax allows us three important features:
Piercing the Shadow Boundary
Because, like a Matroshka doll of code, you can have components inside components inside components, you can chain pseudo-elements. In Stylable, Gallery::NavigationPanel::Button::Icon is a legitimate selector. We were worried by this (even though all Stylable CSS is transpiled to flat, valid CSS) because it’s not allowed in CSS, albeit with the note “A future version of this specification may allow multiple pseudo-elements per selector”. So I asked the CSS Working Group and was told “we intend to only allow specific combinations”, so we feel this extension to CSS is in the spirit of the language.
While we’re on the subject of those pesky Web Standards, note that the proposed ::part and ::theme pseudo-elements are meant to fulfil the same function. However, those are coming in two years (YouTube link) and, when they do, Stylable will support them.
Structure-agnostic
The second totez-groovy™ feature of Stylable’s pseudo-element syntax is that you don’t have to care about the internal structure of the component whose boundary you’re piercing. Any element with a class attribute is exposed as a pseudo-element to any component that imports it. It acts as an interface on any component, whether written in-house or by a third party.
Code completion
When we started writing Stylable, our objective was to do for CSS what TypeScript does for JavaScript. Wikipedia says
Challenges with dealing with complex JavaScript code led to demand for custom tooling to ease developing of components in the language. TypeScript developers sought a solution that would not break compatibility with the standard and its cross-platform support … [with] static typing that enables static language analysis, which facilitates tooling and IDE support.
Similarly, because Stylable knows about components, their stylable parts and states, and how they inter-relate, we can develop language services like code completion and validation. That means we can see our errors at build time or even while working in our IDE. Wave goodbye to silent run-time breakage misery, with the Stylable Intelligence VS Code extension !
An action replay of Visual Studio Code offering code completion etc, filmed in super StyloVision.
Pseudo-classes for state
Stylable makes it easy to apply styles to custom states (as well as the usual :active, :checked, :visited etc) by extending the CSS pseudo-class syntax.
We do this by declaring the possible custom states on the component:
/* Gallery.st.css */
.root {
-st-states: toggled, loading;
}
.root:toggled {
color: red;
}
.root:loading {
color: green;
}
.root:loading:toggled {
color: blue;
}
The -st-states “property” is actually a directive for the transpiler, so Stylable knows about possible pseudo-elements and can offer code completion etc. It looks like a vendor prefix by design, because it’s therefore valid CSS syntax and IDEs won’t flag it as an error, but is removed at build time. Remember, Stylable resolves to flat, valid, cross-browser CSS.
As with plain CSS, it can’t set a state, but can only react to states set externally. In the case of custom pseudo-classes, your JavaScript logic is responsible for maintaining state — by default, by setting a data-* attribute.
And there’s more!
Hopefully, I’ve shown you how Stylable extends CSS to allow you to style components and sub-components without worrying about that styles will leak, or knowing too much about internal structure. There isn’t time to tell you about mixins (CSS macros in JavaScript), variables or our theming capabilities, because I have wine to wrap and presents to mull.
We made Stylable because we ♥ CSS. But there’s a practical reason, too. As James Kyle, a core team member of Yarn, Babel and TC39 (the JavaScript Standards Technical Committee), said of Styable “pretty sure all the CSS-in-JS libraries just died for me”,
explaining
CSS could be perfectly static if given the right tools, that’s exactly what stylable does. It gives you the tools you need in CSS so that you don’t need to do a bunch of dynamic shit in JS.
Making it static is a huge performance win.
Wix is currently battle-testing Stylable in its back-office systems, before rolling it out to power Wix-hosted sites to make them more performant. There are 110 million Wix-hosted sites, so there will be a lot of Stylable on the web in a few months. And it’s open-sourced so you, dear Reader, can try it out and use it too. There’s a Stylable boilerplate based on create-react-app to get you started (more integrations are in the pipeline).
Happy Hols ‘n’ Hugz from the Stylable team: Bruce, Arnon, Tom, Ido.
Read more
Stylable documentation centre
Stylable on Twitter
A nice picture of a hedgehog |
2017 |
Bruce Lawson |
brucelawson |
2017-12-09T00:00:00+00:00 |
https://24ways.org/2017/styling-components-typed-css-with-stylable/ |
code |
| 220 |
Finding Your Way with Static Maps |
Since the introduction of the Google Maps service in 2005, online maps have taken off in a way not really possible before the invention of slippy map interaction. Although quickly followed by a plethora of similar services from both commercial and non-commercial parties, Google’s first-mover advantage, and easy-to-use developer API saw Google Maps become pretty much the de facto mapping service.
It’s now so easy to add a map to a web page, there’s no reason not to. Dropping an iframe map into your page is as simple as embedding a YouTube video.
But there’s one crucial drawback to both the solution Google provides for you to drop into your page and the code developers typically implement themselves – they don’t work without JavaScript.
A bit about JavaScript
Back in October of this year, The Yahoo! Developer Network blog ran some tests to measure how many visitors to the Yahoo! home page didn’t have JavaScript available or enabled in their browser. It’s an interesting test when you consider that the audience for the Yahoo! home page (one of the most visited pages on the web) represents about as mainstream a sample as you’ll find. If there’s any such thing as an ‘average Web user’ then this is them.
The results surprised me. It varied from region to region, but at most just two per cent of visitors didn’t have JavaScript running. To be honest, I was expecting it to be higher, but this quote from the article caught my attention:
While the percentage of visitors with JavaScript disabled seems like a low number, keep in mind that small percentages of big numbers are also big numbers.
That’s right, of course, and it got me thinking about what that two per cent means. For many sites, two per cent is the number of visitors using the Opera web browser, using IE6, or using Mobile Safari.
So, although a small percentage of the total, users without JavaScript can’t just be forgotten about, and catering for them is at the very heart of how the web is supposed to work.
Starting with content in HTML, we layer on presentation with CSS and then enhance interactivity with JavaScript. If anything fails along the way or the network craps out, or a browser just doesn’t support one of the technologies, the user still gets something they can work with.
It’s progressive enhancement – also known as doing our jobs properly.
Sorry, wasn’t this about maps?
As I was saying, the default code Google provides, and the example code it gives to developers (which typically just gets followed ‘as is’) doesn’t account for users without JavaScript. No JavaScript, no content.
When adding the ability to publish maps to our small content management system Perch, I didn’t want to provide a solution that only worked with JavaScript. I had to go looking for a way to provide maps without JavaScript, too.
There’s a simple solution, fortunately, in the form of static map tiles. All the various slippy map services use a JavaScript interface on top of what are basically rendered map image tiles. Dragging the map loads in more image tiles in the direction you want to view. If you’ve used a slippy map on a slow connection, you’ll be familiar with seeing these tiles load in one by one.
The Static Map API
The good news is that these tiles (or tiles just like them) can be used as regular images on your site. Google has a Static Map API which not only gives you a handy interface to retrieve a tile for the exact area you need, but also allows you to place pins, and zoom and centre the tile so that the image looks just so.
This means that you can create a static, non-JavaScript version of your slippy map’s initial (or ideal) state to load into your page as a regular image, and then have the JavaScript map hijack the image and make it slippy.
Clearly, that’s not going to be a perfect solution for every map’s requirements. It doesn’t allow for panning, zooming or interrogation without JavaScript. However, for the majority of straightforward map uses online, a static map makes a great alternative for those visitors without JavaScript.
Here’s the how
Retrieving a static map tile is staggeringly easy – it’s just a case of forming a URL with the correct arguments and then using that as the src of an image tag.
<img src="http://maps.google.com/maps/api/staticmap
?center=Bethlehem+Israel
&zoom=5
&size=540x280
&maptype=satellite
&markers=color:red|31.4211,35.1144
&sensor=false"
width="540" height="280" alt="Map of Bethlehem, Israel" />
As you can see, there are a few key options that we pass along to the base URL. All of these should be familiar to anyone who’s worked with the JavaScript API.
center determines the point on which the map is centred. This can be latitude and longitude values, or simply an address which is then geocoded.
zoom sets the zoom level.
size is the pixel dimensions of the image you require.
maptype can be roadmap, satellite, terrain or hybrid.
markers sets one or more pin locations. Markers can be labelled, have different colours, and so on – there’s quite a lot of control available.
sensor states whether you are using a sensor to determine the user’s location. When just embedding a map in a web page, set this to false.
There are many options, including plotting paths and setting the image format, which can all be found in the straightforward documentation.
Adding to your page
If you’ve worked with the JavaScript API, you’ll know that it needs a container element which you inject the map into:
<div id="map"></div>
All you need to do is put your static image inside that container:
<div id="map">
<img src="http://maps.google.com/maps/api/staticmap[...]" />
</div>
And then, in your JavaScript, find the image and remove it. For example, with jQuery you’d simply use:
$('#map img').remove();
Why not use a <noscript> element around the image? You could, and that would certainly work fine for browsers that do not support JavaScript. What that won’t cover, however, is the situation where the browser has JavaScript support but, for whatever reason, the JavaScript doesn’t run. This could be due to network issues, an aggressive corporate firewall, or even just a bug in your code. So for that reason, we put the image in for all browsers that show images, and then remove it when the JavaScript is successfully running.
See an example in action
About rate limits
The Google Static Map API limits the requests per site viewer – currently at one thousand distinct maps per day per viewer. So, for most sites you really don’t need to worry about the rate limit. Requests for the same tile aren’t normally counted, as the tile has already been generated and is cached. You can embed the images direct from Google and let it worry about the distribution and caching.
In conclusion
As you can see, adding a static map alongside your dynamic map for those users without JavaScript is very easy indeed. There may not be a huge percentage of web visitors browsing without JavaScript but, as we’ve seen, a small percentage of a big number is still a big number. When it’s so easy to add a static map, can you really justify not doing it? |
2010 |
Drew McLellan |
drewmclellan |
2010-12-01T00:00:00+00:00 |
https://24ways.org/2010/finding-your-way-with-static-maps/ |
code |
| 221 |
“Probably, Maybe, No”: The State of HTML5 Audio |
With the hype around HTML5 and CSS3 exceeding levels not seen since 2005’s Ajax era, it’s worth noting that the excitement comes with good reason: the two specifications render many years of feature hacks redundant by replacing them with native features. For fun, consider how many CSS2-based rounded corners hacks you’ve probably glossed over, looking for a magic solution. These days, with CSS3, the magic is border-radius (and perhaps some vendor prefixes) followed by a coffee break.
CSS3’s border-radius, box-shadow, text-shadow and gradients, and HTML5’s <canvas>, <audio> and <video> are some of the most anticipated features we’ll see put to creative (ab)use as adoption of the ‘new shiny’ grows. Developers jumping on the cutting edge are using subsets of these features to little detriment, in most cases. The more popular CSS features are design flourishes that can degrade nicely, but the current audio and video implementations in particular suffer from a number of annoyances.
The new shiny: how we got here
Sound involves one of the five senses, a key part of daily life for most – and yet it has been strangely absent from HTML and much of the web by default. From a simplistic perspective, it seems odd that HTML did not include support for the full multimedia experience earlier, despite the CD-ROM-based craze of the early 1990s. In truth, standards like HTML can take much longer to bake, but eventually deliver the promise of a lowered barrier to entry, consistent implementations and shiny new features now possible ‘for free’ just about everywhere.
<img> was introduced early and naturally to HTML, despite having some opponents at the time. Perhaps <audio> and <video> were avoided, given the added technical complexity of decoding various multi-frame formats, plus the hardware and bandwidth limitations of the era. Perhaps there were quarrels about choosing a standard format or – more simply – maybe these elements just weren’t considered to be applicable to the HTML-based web at the time. In any event, browser plugins from programs like RealPlayer and QuickTime eventually helped to fill the in-page audio/video gap, handling <object> and <embed> markup which pointed to .wav, .avi, .rm or .mov files. Suffice it to say, the experience was inconsistent at best and, on the standards side of the fence right now, so is HTML5 in terms of audio and video.
: the theory
As far as HTML goes, the code for <audio> is simple and logical. Just as with <img>, a src attribute specifies the file to load. Pretty straightforward – sounds easy, right?
<audio src="mysong.ogg" controls>
<!-- alternate content for unsupported case -->
Download <a href="mysong.ogg">mysong.ogg</a>;
</audio>
Ah, if only it were that simple. The first problem is that the OGG audio format, while ‘free’, is not supported by some browsers. Conversely, nor is MP3, despite being a de facto standard used in all kinds of desktop software (and hardware). In fact, as of November 2010, no single audio format is commonly supported across all major HTML5-enabled browsers.
What you end up writing, then, is something like this:
<audio controls>
<source src="mysong.mp3" />
<source src="mysong.ogg" />
<!-- alternate content for unsupported case, maybe Flash, etc. -->
Download <a href="mysong.ogg">mysong.ogg</a> or <a href="mysong.mp3">mysong.mp3</a>
</audio>
Keep in mind, this is only a ‘first class’ experience for the HTML5 case; also, for non-supported browsers, you may want to look at another inline player (object/embed, or a JavaScript plus Flash API) to have inline audio. You can imagine the added code complexity in the case of supporting ‘first class’ experiences for older browsers, too.
: the caveats
With <img>, you typically don’t have to worry about format support – it just works – and that’s part of what makes a standard wonderful. JPEG, PNG, BMP, GIF, even TIFF images all render just fine if for no better reason, perhaps, than being implemented during the ‘wild west’ days of the web. The situation with <audio> today reflects a very different – read: business-aware – environment in 2010. (Further subtext: There’s a lot of [potential] money involved.) Regrettably, this is a collision of free and commercial interests, where the casualty is ultimately the user. Second up in the casualty list is you, the developer, who has to write additional code around this fragmented support.
The HTML5 audio API as implemented in JavaScript has one of the most un-computer-like responses I’ve ever seen, and inspired the title of this post. Calling new Audio().canPlayType('audio/mp3'), which queries the system for format support according to a MIME type, is supposed to return one of “probably”, “maybe”, or “no”. Sometimes, you’ll just get a null or empty string, which is also fun. A “maybe” response does not guarantee that a format will be supported; sometimes audio/mp3 gives “maybe,” but then audio/mpeg; codecs="mp3" will give a more-solid “probably” response. This can vary by browser or platform, too, depending on native support – and finally, the user may also be able to install codecs, extending support to include other formats. (Are you excited yet?)
Damn you, warring formats!
New market and business opportunities go hand-in-hand with technology developments. What we have here is certainly not failure to communicate; rather, we have competing parties shouting loudly in public in attempts to influence mindshare towards a de facto standard for audio and video. Unfortunately, the current situation means that at least two formats are effectively required to serve the majority of users correctly.
As it currently stands, we have the free and open source software camp of OGG Vorbis/WebM and its proponents (notably, Mozilla, Google and Opera in terms of browser makers), up against the non-free, proprietary and ‘closed’ camp of MP3 and MPEG4/HE-AAC/H.264 – which is where you’ll find commitments from Apple and Microsoft, among others. Apple is likely in with H.264 for the long haul, given its use of the format for its iTunes music store and video offerings.
It is generally held that H.264 is a technically superior format in terms of file size versus quality, but it involves intellectual property and, in many use cases, requires licensing fees. To be fair, there is a business model with H.264 and much has been invested in its development, but this approach is not often the kind that wins over the web. On that front, OGG/WebM may eventually win for being a ‘free’ format that does not involve a licensing scheme.
Closed software and tools ideologically clash with the open nature of the web, which exists largely thanks to free and open technology. Because of philosophical and business reasons, support for audio and video is fragmented across browsers adopting HTML5 features. It does not help that a large amount of audio and video currently exists in non-free MP3 and MPEG-4 formats. Adoption of <audio> and <video> may be slowed, since it is more complex than <img> and may feel ‘broken’ to developers when edge cases are encountered. Furthermore, the HTML5 spec does not mandate a single required format. The end result is that, as a developer, you must currently provide at least both MP3 and OGG, for example, to serve most existing HTML5-based user agents.
Transitioning to
There will be some growing pains as developers start to pick up the new HTML5 shiny, while balancing the needs of current and older agents that don’t support either <audio> or the preferred format you may choose (for example, MP3). In either event, Flash or other plugins can be used as done traditionally within HTML4 documents to embed and play the relevant audio.
The SoundManager 2 page player demo in action.
Ideally, HTML5 audio should be used whenever possible with Flash as the backup option. A few JavaScript/Flash-based audio player projects exist which balance the two; in attempting to tackle this problem, I develop and maintain SoundManager 2, a JavaScript sound API which transparently uses HTML5 Audio() and, if needed, Flash for playing audio files. The internals can get somewhat ugly, but the transition between HTML4 and HTML5 is going to be just that – and even with HTML5, you will need some form of format fall-back in addition to graceful degradation.
It may be safest to fall back to MP3/MP4 formats for inline playback at this time, given wide support via Flash, some HTML5-based browsers and mobile devices. Considering the amount of MP3/MP4 media currently available, it is wiser to try these before falling through to a traditional file download process.
Early findings
Here is a brief list of behavioural notes, annoyances, bugs, quirks and general weirdness I have found while playing with HTML5-based audio at time of writing (November 2010):
Apple iPad/iPhone (iOS 4, iPad 3.2+)
Only one sound can be played at a time. If a second sound starts, the first is stopped.
No auto-play allowed. Sounds follow the pop-up window security model and can only be started from within a user event handler such as onclick/touch, and so on. Otherwise, playback attempts silently fail.
Once started, a sequence of sounds can be created or played via the ‘finish’ event of the previous sound (for example, advancing through a playlist without interaction after first track starts).
iPad, iOS 3.2: Occasional ‘infinite loop’ bug seen where audio does not complete and stop at a sound’s logical end – instead, it plays again from the beginning. Might be specific to example file format (HE-AAC) encoded from iTunes.
Apple Safari, OS X Snow Leopard 10.6.5
Critical bug: Safari 4 and 5 intermittently fail to load or play HTML5 audio on Snow Leopard due to bug(s) in QuickTime X and/or other underlying frameworks. Known Apple ‘radar’ bug: bugs.webkit.org #32159 (see also, test case.) Amusing side note: Safari on Windows is fine.
Apple Safari, Windows
Food for thought: if you download “Safari” alone on Windows, you will not get HTML5 audio/video support (tested in WinXP). You need to download “Safari + QuickTime” to get HTML5 audio/video support within Safari. (As far as I’m aware, Chrome, Firefox and Opera either include decoders or use system libraries accordingly. Presumably IE 9 will use OS-level APIs.)
General Quirks
Seeking and loading, ‘progress’ events, and calculating bytes loaded versus bytes total should not be expected to be linear, as users can arbitrarily seek within a sound. It appears that some support for HTTP ranges exists, which adds a bit of logic to UI code. Browsers seem to vary slightly in their current implementations of these features.
The onload event of a sound may be of little relevance, if non-linear loading is involved (see above note re: seeking).
Interestingly (perhaps I missed it), the current spec does not seem to specify a panning or left/right channel mix option.
The preload attribute values may vary slightly between browsers at this time.
Upcoming shiny: HTML5 Audio Data API
With access to audio data, you can incorporate waveform and spectrum elements that make your designs react to music.
The HTML5 audio spec does a good job covering the basics of playback, but did not initially get into manipulation or generation of audio on-the-fly, something Flash has had for a number of years now. What if JavaScript could create, monitor and change audio dynamically, like a sort of audio <canvas> element? With that kind of capability, many dynamic audio processing features become feasible and, when combined with other media, can make for some impressive demos.
What started as a small idea among a small group of audio and programming enthusiasts grew to inspire a W3C audio incubator group, and continued to establish the Mozilla Audio Data API. Contributors wrote a patch for Firefox which was reviewed and revised, and is now slated to be in the public release of Firefox 4. Some background and demos are also detailed in an article from the BBC R&D blog.
There are plenty of live demos to see, which give an impression of the new creative ideas this API enables. Many concepts are not new in themselves, but it is exciting to see this sort of thing happening within the native browser context.
Mozilla is not alone in this effort; the WebKit folks are also working on a JavaScriptAudioNode interface, which implements similar audio buffering and sample elements.
The future?
It is my hope that we’ll see a common format emerge in terms of support across the major browsers for both audio and video; otherwise, support will continue to be fragmented and mildly frustrating to develop for, and that can impede growth of the feature. It’s a big call, but if <img> had lacked a common format back in the wild west era, I doubt the web would have grown to where it is today.
Complaints and nitpicks aside, HTML5 brings excellent progress on the browser multimedia front, and the first signs of native support are a welcome improvement given all audio and video previously relied on plugins. There is good reason to be excited. While there is room for more, support could certainly be much worse – and as tends to happen with specifications, the implementations targeting them should improve over time.
Note: Thanks to Nate Koechley, who suggested the Audio().canPlayType() response be part of the article title. |
2010 |
Scott Schiller |
scottschiller |
2010-12-08T00:00:00+00:00 |
https://24ways.org/2010/the-state-of-html5-audio/ |
code |
| 223 |
Calculating Color Contrast |
Some websites and services allow you to customize your profile by uploading pictures, changing the background color or other aspects of the design. As a customer, this personalization turns a web app into your little nest where you store your data. As a designer, letting your customers have free rein over the layout and design is a scary prospect. So what happens to all the stock text and images that are designed to work on nice white backgrounds? Even the Mac only lets you choose between two colors for the OS, blue or graphite! Opening up the ability to customize your site’s color scheme can be a recipe for disaster unless you are flexible and understand how to find maximum color contrasts.
In this article I will walk you through two simple equations to determine if you should be using white or black text depending on the color of the background. The equations are both easy to implement and produce similar results. It isn’t a matter of which is better, but more the fact that you are using one at all! That way, even with the craziest of Geocities color schemes that your customers choose, at least your text will still be readable.
Let’s have a look at a range of various possible colors. Maybe these are pre-made color schemes, corporate colors, or plucked from an image.
Now that we have these potential background colors and their hex values, we need to find out whether the corresponding text should be in white or black, based on which has a higher contrast, therefore affording the best readability. This can be done at runtime with JavaScript or in the back-end before the HTML is served up.
There are two functions I want to compare. The first, I call ’50%’. It takes the hex value and compares it to the value halfway between pure black and pure white. If the hex value is less than half, meaning it is on the darker side of the spectrum, it returns white as the text color. If the result is greater than half, it’s on the lighter side of the spectrum and returns black as the text value.
In PHP:
function getContrast50($hexcolor){
return (hexdec($hexcolor) > 0xffffff/2) ? 'black':'white';
}
In JavaScript:
function getContrast50(hexcolor){
return (parseInt(hexcolor, 16) > 0xffffff/2) ? 'black':'white';
}
It doesn’t get much simpler than that! The function converts the six-character hex color into an integer and compares that to one half the integer value of pure white. The function is easy to remember, but is naive when it comes to understanding how we perceive parts of the spectrum. Different wavelengths have greater or lesser impact on the contrast.
The second equation is called ‘YIQ’ because it converts the RGB color space into YIQ, which takes into account the different impacts of its constituent parts. Again, the equation returns white or black and it’s also very easy to implement.
In PHP:
function getContrastYIQ($hexcolor){
$r = hexdec(substr($hexcolor,0,2));
$g = hexdec(substr($hexcolor,2,2));
$b = hexdec(substr($hexcolor,4,2));
$yiq = (($r*299)+($g*587)+($b*114))/1000;
return ($yiq >= 128) ? 'black' : 'white';
}
In JavaScript:
function getContrastYIQ(hexcolor){
var r = parseInt(hexcolor.substr(0,2),16);
var g = parseInt(hexcolor.substr(2,2),16);
var b = parseInt(hexcolor.substr(4,2),16);
var yiq = ((r*299)+(g*587)+(b*114))/1000;
return (yiq >= 128) ? 'black' : 'white';
}
You’ll notice first that we have broken down the hex value into separate RGB values. This is important because each of these channels is scaled in accordance to its visual impact. Once everything is scaled and normalized, it will be in a range between zero and 255. Much like the previous ’50%’ function, we now need to check if the input is above or below halfway. Depending on where that value is, we’ll return the corresponding highest contrasting color.
That’s it: two simple contrast equations which work really well to determine the best readability.
If you are interested in learning more, the W3C has a few documents about color contrast and how to determine if there is enough contrast between any two colors. This is important for accessibility to make sure there is enough contrast between your text and link colors and the background.
There is also a great article by Kevin Hale on Particletree about his experience with choosing light or dark themes. To round it out, Jonathan Snook created a color contrast picker which allows you to play with RGB sliders to get values for YIQ, contrast and others. That way you can quickly fiddle with the knobs to find the right balance.
Comparing results
Let’s revisit our color schemes and see which text color is recommended for maximum contrast based on these two equations.
If we use the simple ’50%’ contrast function, we can see that it recommends black against all the colors except the dark green and purple on the second row. In general, the equation feels the colors are light and that black is a better choice for the text.
The more complex ‘YIQ’ function, with its weighted colors, has slightly different suggestions. White text is still recommended for the very dark colors, but there are some surprises. The red and pink values show white text rather than black. This equation takes into account the weight of the red value and determines that the hue is dark enough for white text to show the most contrast.
As you can see, the two contrast algorithms agree most of the time. There are some instances where they conflict, but overall you can use the equation that you prefer. I don’t think it is a major issue if some edge-case colors get one contrast over another, they are still very readable.
Now let’s look at some common colors and then see how the two functions compare. You can quickly see that they do pretty well across the whole spectrum.
In the first few shades of grey, the white and black contrasts make sense, but as we test other colors in the spectrum, we do get some unexpected deviation. Pure red #FF0000 has a flip-flop. This is due to how the ‘YIQ’ function weights the RGB parts. While you might have a personal preference for one style over another, both are justifiable.
In this second round of colors, we go deeper into the spectrum, off the beaten track. Again, most of the time the contrasting algorithms are in sync, but every once in a while they disagree. You can select which you prefer, neither of which is unreadable.
Conclusion
Contrast in color is important, especially if you cede all control and take a hands-off approach to the design. It is important to select smart defaults by making the contrast between colors as high as possible. This makes it easier for your customers to read, increases accessibility and is generally just easier on the eyes.
Sure, there are plenty of other equations out there to determine contrast; what is most important is that you pick one and implement it into your system.
So, go ahead and experiment with color in your design. You now know how easy it is to guarantee that your text will be the most readable in any circumstance. |
2010 |
Brian Suda |
briansuda |
2010-12-24T00:00:00+00:00 |
https://24ways.org/2010/calculating-color-contrast/ |
code |
| 231 |
Designing for iOS: Life Beyond Media Queries |
Although not a new phenomenon, media queries seem to be getting a lot attention online recently and for the right reasons too – it’s great to be able to adapt a design with just a few lines of CSS – but many people are relying only on them to create an iPhone-specific version of their website.
I was pleased to hear at FOWD NYC a few weeks ago that both myself and Aral Balkan share the same views on why media queries aren’t always going to be the best solution for mobile. Both of us specialise in iPhone design ourselves and we opt for a different approach to media queries. The trouble is, regardless of what you have carefully selected to be display:none; in your CSS, the iPhone still loads everything in the background; all that large imagery for your full scale website also takes up valuable mobile bandwidth and time.
You can greatly increase the speed of your website by creating a specific site tailored to mobile users with just a few handy pointers – media queries, in some instances, might be perfectly suitable but, in others, here’s what you can do.
Redirect your iPhone/iPod Touch users
To detect whether someone is viewing your site on an iPhone or iPod Touch, you can either use JavaScript or PHP.
The JavaScript
if((navigator.userAgent.match(/iPhone/i)) || (navigator.userAgent.match(/iPod/i))) {
if (document.cookie.indexOf("iphone_redirect=false") == -1) window.location = "http://mobile.yoursitehere.com";
}
The PHP
if(strstr($_SERVER['HTTP_USER_AGENT'],'iPhone') || strstr($_SERVER['HTTP_USER_AGENT'],'iPod'))
{
header('Location: http://mobile.yoursitehere.com');
exit();
}
Both of these methods redirect the user to a site that you have made specifically for the iPhone. At this point, be sure to provide a link to the full version of the website, in case the user wishes to view this and not be thrown into an experience they didn’t want, with no way back.
Tailoring your site
So, now you’ve got 320 × 480 pixels of screen to play with – and to create a style sheet for, just as you would for any other site you build. There are a few other bits and pieces that you can add to your code to create a site that feels more like a fully immersive iPhone app rather than a website.
Retina display
When building your website specifically tailored to the iPhone, you might like to go one step further and create a specific style sheet for iPhone 4’s Retina display. Because there are four times as many pixels on the iPhone 4 (640 × 960 pixels), you’ll find specifics such as text shadows and borders will have to be increased.
<link rel="stylesheet"
media="only screen and (-webkit-min-device-pixel-ratio: 2)"
type="text/css" href="../iphone4.css" />
(Credit to Thomas Maier)
Prevent user scaling
This declaration, added into the <head>, stops the user being able to pinch-zoom in and out of your design, which is perfect if you are designing to the exact pixel measurements of the iPhone screen.
<meta name="viewport"
content="width=device-width; initial-scale=1.0; maximum-scale=1.0;">
Designing for orientation
As iPhones aren’t static devices, you’ll also need to provide a style sheet for horizontal orientation. We can do this by inserting some JavaScript into the <head> as follows:
<script type="text/javascript">
function orient() {
switch(window.orientation) {
case 0:
document.getElementById("orient_css").href = "css/iphone_portrait.css";
break;
case -90:
document.getElementById("orient_css").href = "css/iphone_landscape.css";
break;
case 90:
document.getElementById("orient_css").href = "css/iphone_landscape.css";
break;
}
}
window.onload = orient();
</script>
You can also specify orientation styles using media queries. This is absolutely fine, as by this point you’ll already be working with mobile-specific graphics and have little need to set a lot of things to display:none;
<link rel="stylesheet"
media="only screen and (max-device-width: 480px)" href="/iphone.css">
<link rel="stylesheet"
media="only screen and (orientation: portrait)" href="/portrait.css">
<link rel="stylesheet"
media="only screen and (orientation: landscape)” href="/landscape.css">
Remove the address and status bars, top and bottom
To give you more room on-screen and to make your site feel more like an immersive web app, you can place the following declaration into the <head> of your document’s code to remove the address and status bars at the top and bottom of the screen.
<meta name="apple-mobile-web-app-capable" content="yes" />
Making the most of inbuilt functions
Similar to mailto: e-mail links, the iPhone also supports another two handy URI schemes which are great for enhancing contact details. When tapped, the following links will automatically bring up the appropriate call or text interface:
<a href="tel:01234567890">Call us</a>
<a href="sms:01234567890">Text us</a>
iPhone-specific Web Clip icon
Although I believe them to be fundamentally flawed, since they rely on the user bookmarking your site, iPhone Web Clip icons are still a nice touch. You need just two declarations, again in the <head> of your document:
<link rel="apple-touch-icon" href="icons/regular_icon.png" />
<link rel="apple-touch-icon" sizes="114x114" href="icons/retina_icon.png" />
For iPhone 4 you’ll need to create a 114 × 114 pixels icon; for a non-Retina display, a 57 × 57 pixels icon will do the trick.
Precomposed
Apple adds its standard gloss ‘moon’ over the top of any icon. If you feel this might be too much for your particular icon and would prefer a matte finish, you can add precomposed to the end of the apple-touch-icon declaration to remove the standard gloss.
<link rel="apple-touch-icon-precomposed" href="/images/touch-icon.png" />
Wrapping up
Media queries definitely have their uses. They make it easy to build a custom experience for your visitor, regardless of their browser’s size. For more complex sites, however, or where you have lots of imagery and other content that isn’t necessary on the mobile version, you can now use these other methods to help you out. Remember, they are purely for presentation and not optimisation; for busy people on the go, optimisation and faster-running mobile experiences can only be a good thing.
Have a wonderful Christmas fellow Webbies! |
2010 |
Sarah Parmenter |
sarahparmenter |
2010-12-17T00:00:00+00:00 |
https://24ways.org/2010/life-beyond-media-queries/ |
code |
| 233 |
Wrapping Things Nicely with HTML5 Local Storage |
HTML5 is here to turn the web from a web of hacks into a web of applications – and we are well on the way to this goal. The coming year will be totally and utterly awesome if you are excited about web technologies.
This year the HTML5 revolution started and there is no stopping it. For the first time all the browser vendors are rallying together to make a technology work. The new browser war is fought over implementation of the HTML5 standard and not over random additions. We live in exciting times.
Starting with a bang
As with every revolution there is a lot of noise with bangs and explosions, and that’s the stage we’re at right now. HTML5 showcases are often CSS3 showcases, web font playgrounds, or video and canvas examples.
This is great, as it gets people excited and it gives the media something to show. There is much more to HTML5, though. Let’s take a look at one of the less sexy, but amazingly useful features of HTML5 (it was in the HTML5 specs, but grew at such an alarming rate that it warranted its own spec): storing information on the client-side.
Why store data on the client-side?
Storing information in people’s browsers affords us a few options that every application should have:
You can retain the state of an application – when the user comes back after closing the browser, everything will be as she left it. That’s how ‘real’ applications work and this is how the web ones should, too.
You can cache data – if something doesn’t change then there is no point in loading it over the Internet if local access is so much faster
You can store user preferences – without needing to keep that data on your server at all.
In the past, storing local data wasn’t much fun.
The pain of hacky browser solutions
In the past, all we had were cookies. I don’t mean the yummy things you get with your coffee, endorsed by the blue, furry junkie in Sesame Street, but the other, digital ones. Cookies suck – it isn’t fun to have an unencrypted HTTP overhead on every server request for storing four kilobytes of data in a cryptic format. It was OK for 1994, but really neither an easy nor a beautiful solution for the task of storing data on the client.
Then came a plethora of solutions by different vendors – from Microsoft’s userdata to Flash’s LSO, and from Silverlight isolated storage to Google’s Gears. If you want to know just how many crazy and convoluted ways there are to store a bit of information, check out Samy’s evercookie.
Clearly, we needed an easier and standardised way of storing local data.
Keeping it simple – local storage
And, lo and behold, we have one. The local storage API (or session storage, with the only difference being that session data is lost when the window is closed) is ridiculously easy to use. All you do is call a few methods on the window.localStorage object – or even just set the properties directly using the square bracket notation:
if('localStorage' in window && window['localStorage'] !== null){
var store = window.localStorage;
// valid, API way
store.setItem(‘cow’,‘moo’);
console.log(
store.getItem(‘cow’)
); // => ‘moo’
// shorthand, breaks at keys with spaces
store.sheep = ‘baa’
console.log(
store.sheep
); // ‘baa’
// shorthand for all
store[‘dog’] = ‘bark’
console.log(
store[‘dog’]
); // => ‘bark’
}
Browser support is actually pretty good: Chrome 4+; Firefox 3.5+; IE8+; Opera 10.5+; Safari 4+; plus iPhone 2.0+; and Android 2.0+. That should cover most of your needs. Of course, you should check for support first (or use a wrapper library like YUI Storage Utility or YUI Storage Lite).
The data is stored on a per domain basis and you can store up to five megabytes of data in localStorage for each domain.
Strings attached
By default, localStorage only supports strings as storage formats. You can’t store results of JavaScript computations that are arrays or objects, and every number is stored as a string. This means that long, floating point numbers eat into the available memory much more quickly than if they were stored as numbers.
var cowdesc = "the cow is of the bovine ilk, "+
"one end is for the moo, the "+
"other for the milk";
var cowdef = {
ilk“bovine”,
legs,
udders,
purposes
front“moo”,
end“milk”
}
};
window.localStorage.setItem(‘describecow’,cowdesc);
console.log(
window.localStorage.getItem(‘describecow’)
); // => the cow is of the bovine…
window.localStorage.setItem(‘definecow’,cowdef);
console.log(
window.localStorage.getItem(‘definecow’)
); // => [object Object] = bad!
This limits what you can store quite heavily, which is why it makes sense to use JSON to encode and decode the data you store:
var cowdef = {
"ilk":"bovine",
"legs":4,
"udders":4,
"purposes":{
"front":"moo",
"end":"milk"
}
};
window.localStorage.setItem(‘describecow’,JSON.stringify(cowdef));
console.log(
JSON.parse(
window.localStorage.getItem(‘describecow’)
)
); // => Object { ilk=“bovine”, more…}
You can also come up with your own formatting solutions like CSV, or pipe | or tilde ~ separated formats, but JSON is very terse and has native browser support.
Some use case examples
The simplest use of localStorage is, of course, storing some data: the current state of a game; how far through a multi-form sign-up process a user is; and other things we traditionally stored in cookies. Using JSON, though, we can do cooler things.
Speeding up web service use and avoiding exceeding the quota
A lot of web services only allow you a certain amount of hits per hour or day, and can be very slow. By using localStorage with a time stamp, you can cache results of web services locally and only access them after a certain time to refresh the data.
I used this technique in my An Event Apart 10K entry, World Info, to only load the massive dataset of all the world information once, and allow for much faster subsequent visits to the site. The following screencast shows the difference:
For use with YQL (remember last year’s 24 ways entry?), I’ve built a small script called YQL localcache that wraps localStorage around the YQL data call. An example would be the following:
yqlcache.get({
yql: 'select * from flickr.photos.search where text="santa"',
id: 'myphotos',
cacheage: ( 60*60*1000 ),
callback: function(data) {
console.log(data);
}
});
This loads photos of Santa from Flickr and stores them for an hour in the key myphotos of localStorage. If you call the function at various times, you receive an object back with the YQL results in a data property and a type property which defines where the data came from – live is live data, cached means it comes from cache, and freshcache indicates that it was called for the first time and a new cache was primed. The cache will work for an hour (60×60×1,000 milliseconds) and then be refreshed. So, instead of hitting the YQL endpoint over and over again, you hit it once per hour.
Caching a full interface
Another use case I found was to retain the state of a whole interface of an application by caching the innerHTML once it has been rendered. I use this in the Yahoo Firehose search interface, and you can get the full story about local storage and how it is used in this screencast:
The stripped down code is incredibly simple (JavaScript with PHP embed):
// test for localStorage support
if(('localStorage' in window) && window['localStorage'] !== null){
var f = document.getElementById(‘mainform’);
// test with PHP if the form was sent (the submit button has the name “sent”)
// get the HTML of the form and cache it in the property “state”
localStorage.setItem(‘state’,f.innerHTML);
// if the form hasn’t been sent…
// check if a state property exists and write back the HTML cache
if(‘state’ in localStorage){
f.innerHTML = localStorage.getItem(‘state’);
}
}
Other ideas
In essence, you can use local storage every time you need to speed up access. For example, you could store image sprites in base-64 encoded datasets instead of loading them from a server. Or you could store CSS and JavaScript libraries on the client. Anything goes – have a play.
Issues with local and session storage
Of course, not all is rainbows and unicorns with the localStorage API. There are a few niggles that need ironing out. As with anything, this needs people to use the technology and raise issues. Here are some of the problems:
Inadequate information about storage quota – if you try to add more content to an already full store, you get a QUOTA_EXCEEDED_ERR and that’s it. There’s a great explanation and test suite for localStorage quota available.
Lack of automatically expiring storage – a feature that cookies came with. Pamela Fox has a solution (also available as a demo and source code)
Lack of encrypted storage – right now, everything is stored in readable strings in the browser.
Bigger, better, faster, more!
As cool as the local and session storage APIs are, they are not quite ready for extensive adoption – the storage limits might get in your way, and if you really want to go to town with accessing, filtering and sorting data, real databases are what you’ll need. And, as we live in a world of client-side development, people are moving from heavy server-side databases like MySQL to NoSQL environments.
On the web, there is also a lot of work going on, with Ian Hickson of Google proposing the Web SQL database, and Nikunj Mehta, Jonas Sicking (Mozilla), Eliot Graff (Microsoft) and Andrei Popescu (Google) taking the idea beyond simply replicating MySQL and instead offering Indexed DB as an even faster alternative.
On the mobile front, a really important feature is to be able to store data to use when you are offline (mobile coverage and roaming data plans anybody?) and you can use the Offline Webapps API for that.
As I mentioned at the beginning, we have a very exciting time ahead – let’s make this web work faster and more reliably by using what browsers offer us. For more on local storage, check out the chapter on Dive into HTML5. |
2010 |
Christian Heilmann |
chrisheilmann |
2010-12-06T00:00:00+00:00 |
https://24ways.org/2010/html5-local-storage/ |
code |
| 234 |
An Introduction to CSS 3-D Transforms |
Ladies and gentlemen, it is the second decade of the third millennium and we are still kicking around the same 2-D interface we got three decades ago. Sure, Apple debuted a few apps for OSX 10.7 that have a couple more 3-D flourishes, and Microsoft has had that Flip 3D for a while. But c’mon – 2011 is right around the corner. That’s Twenty Eleven, folks. Where is our 3-D virtual reality? By now, we should be zipping around the Metaverse on super-sonic motorbikes.
Granted, the capability of rendering complex 3-D environments has been present for years. On the web, there are already several solutions: Flash; three.js in <canvas>; and, eventually, WebGL. Finally, we meagre front-end developers have our own three-dimensional jewel: CSS 3-D transforms!
Rationale
Like a beautiful jewel, 3-D transforms can be dazzling, a true spectacle to behold. But before we start tacking 3-D diamonds and rubies to our compositions like Liberace‘s tailor, we owe it to our users to ask how they can benefit from this awesome feature.
An entire application should not take advantage of 3-D transforms. CSS was built to style documents, not generate explorable environments. I fail to find a benefit to completing a web form that can be accessed by swivelling my viewport to the Sign-Up Room (although there have been proposals to make the web just that). Nevertheless, there are plenty of opportunities to use 3-D transforms in between interactions with the interface, via transitions.
Take, for instance, the Weather App on the iPhone. The application uses two views: a details view; and an options view. Switching between these two views is done with a 3-D flip transition. This informs the user that the interface has two – and only two – views, as they can exist only on either side of the same plane.
Flipping from details view to options view via a 3-D transition
Also, consider slide shows. When you’re looking at the last slide, what cues tip you off that advancing will restart the cycle at the first slide? A better paradigm might be achieved with a 3-D transform, placing the slides side-by-side in a circle (carousel) in three-dimensional space; in that arrangement, the last slide obviously comes before the first.
3-D transforms are more than just eye candy. We can also use them to solve dilemmas and make our applications more intuitive.
Current support
The CSS 3D Transforms module has been out in the wild for over a year now. Currently, only Safari supports the specification – which includes Safari on Mac OS X and Mobile Safari on iOS.
The support roadmap for other browsers varies. The Mozilla team has taken some initial steps towards implementing the module. Mike Taylor tells me that the Opera team is keeping a close eye on CSS transforms, and is waiting until the specification is fleshed out. And our best friend Internet Explorer still needs to catch up to 2-D transforms before we can talk about the 3-D variety.
To make matters more perplexing, Safari’s WebKit cousin Chrome currently accepts 3-D transform declarations, but renders them in 2-D space. Chrome team member Paul Irish, says that 3-D transforms are on the horizon, perhaps in one of the next 8.0 releases.
This all adds up to a bit of a challenge for those of us excited by 3-D transforms. I’ll give it to you straight: missing the dimension of depth can make degradation a bit ungraceful. Unless the transform is relatively simple and holds up in non-3D-supporting browsers, you’ll most likely have to design another solution. But what’s another hurdle in a steeplechase? We web folk have had our mettle tested for years. We’re prepared to devise multiple solutions.
Here’s the part of the article where I mention Modernizr, and you brush over it because you’ve read this part of an article hundreds of times before. But seriously, it’s the best way to test for CSS 3-D transform support. Use it.
Even with these difficulties mounting up, trying out 3-D transforms today is the right move. The CSS 3-D transforms module was developed by the same team at Apple that produced the CSS 2D Transforms and Animation modules. Both specifications have since been adopted by Mozilla and Opera. Transforming in three-dimensions now will guarantee you’ll be ahead of the game when the other browsers catch up.
The choice is yours. You can make excuses and pooh-pooh 3-D transforms because they’re too hard and only snobby Apple fans will see them today. Or, with a tip of the fedora to Mr Andy Clarke, you can get hard-boiled and start designing with the best features out there right this instant.
So, I bid you, in the words of the eternal Optimus Prime…
Transform and roll out.
Let’s get coding.
Perspective
To activate 3-D space, an element needs perspective. This can be applied in two ways: using the transform property, with the perspective as a functional notation:
-webkit-transform: perspective(600);
or using the perspective property:
-webkit-perspective: 600;
See example: Perspective 1.
The red element on the left uses transform: perspective() functional notation; the blue element on the right uses the perspective property
These two formats both trigger a 3-D space, but there is a difference. The first, functional notation is convenient for directly applying a 3-D transform on a single element (in the previous example, I use it in conjunction with a rotateY transform). But when used on multiple elements, the transformed elements don’t line up as expected. If you use the same transform across elements with different positions, each element will have its own vanishing point. To remedy this, use the perspective property on a parent element, so each child shares the same 3-D space.
See Example: Perspective 2.
Each red box on the left has its own vanishing point within the parent container; the blue boxes on the right share the vanishing point of the parent container
The value of perspective determines the intensity of the 3-D effect. Think of it as a distance from the viewer to the object. The greater the value, the further the distance, so the less intense the visual effect. perspective: 2000; yields a subtle 3-D effect, as if we were viewing an object from far away. perspective: 100; produces a tremendous 3-D effect, like a tiny insect viewing a massive object.
By default, the vanishing point for a 3-D space is positioned at its centre. You can change the position of the vanishing point with perspective-origin property.
-webkit-perspective-origin: 25% 75%;
See Example: Perspective 3.
3-D transform functions
As a web designer, you’re probably well acquainted with working in two dimensions, X and Y, positioning items horizontally and vertically. With a 3-D space initialised with perspective, we can now transform elements in all three glorious spatial dimensions, including the third Z dimension, depth.
3-D transforms use the same transform property used for 2-D transforms. If you’re familiar with 2-D transforms, you’ll find the basic 3D transform functions fairly similar.
rotateX(angle)
rotateY(angle)
rotateZ(angle)
translateZ(tz)
scaleZ(sz)
Whereas translateX() positions an element along the horizontal X-axis, translateZ() positions it along the Z-axis, which runs front to back in 3-D space. Positive values position the element closer to the viewer, negative values further away.
The rotate functions rotate the element around the corresponding axis. This is somewhat counter-intuitive at first, as you might imagine that rotateX will spin an object left to right. Instead, using rotateX(45deg) rotates an element around the horizontal X-axis, so the top of the element angles back and away, and the bottom gets closer to the viewer.
See Example: Transforms 1.
3-D rotate() and translate() functions around each axis
There are also several shorthand transform functions that require values for all three dimensions:
translate3d(tx,ty,tz)
scale3d(sx,sy,sz)
rotate3d(rx,ry,rz,angle)
Pro-tip: These foo3d() transform functions also have the benefit of triggering hardware acceleration in Safari. Dean Jackson, CSS 3-D transform spec author and main WebKit dude, writes (to Thomas Fuchs):
In essence, any transform that has a 3D operation as one of its functions will trigger hardware compositing, even when the actual transform is 2D, or not doing anything at all (such as translate3d(0,0,0)). Note this is just current behaviour, and could change in the future (which is why we don’t document or encourage it). But it is very helpful in some situations and can significantly improve redraw performance.
For the sake of simplicity, my demos will use the basic transform functions, but if you’re writing production-ready CSS for iOS or Safari-only, make sure to use the foo3d() functions to get the best rendering performance.
Card flip
We now have all the tools to start making 3-D objects. Let’s get started with something simple: flipping a card.
Here’s the basic markup we’ll need:
<section class="container">
<div id="card">
<figure class="front">1</figure>
<figure class="back">2</figure>
</div>
</section>
The .container will house the 3-D space. The #card acts as a wrapper for the 3-D object. Each face of the card has a separate element: .front; and .back. Even for such a simple object, I recommend using this same pattern for any 3-D transform. Keeping the 3-D space element and the object element(s) separate establishes a pattern that is simple to understand and easier to style.
We’re ready for some 3-D stylin’. First, apply the necessary perspective to the parent 3-D space, along with any size or positioning styles.
.container {
width: 200px;
height: 260px;
position: relative;
-webkit-perspective: 800;
}
Now the #card element can be transformed in its parent’s 3-D space. We’re combining absolute and relative positioning so the 3-D object is removed from the flow of the document. We’ll also add width: 100%; and height: 100%;. This ensures the object’s transform-origin will occur in the centre of .container. More on transform-origin later.
Let’s add a CSS3 transition so users can see the transform take effect.
#card {
width: 100%;
height: 100%;
position: absolute;
-webkit-transform-style: preserve-3d;
-webkit-transition: -webkit-transform 1s;
}
The .container’s perspective only applies to direct descendant children, in this case #card. In order for subsequent children to inherit a parent’s perspective, and live in the same 3-D space, the parent can pass along its perspective with transform-style: preserve-3d. Without 3-D transform-style, the faces of the card would be flattened with its parents and the back face’s rotation would be nullified.
To position the faces in 3-D space, we’ll need to reset their positions in 2-D with position: absolute. In order to hide the reverse sides of the faces when they are faced away from the viewer, we use backface-visibility: hidden.
#card figure {
display: block;
position: absolute;
width: 100%;
height: 100%;
-webkit-backface-visibility: hidden;
}
To flip the .back face, we add a basic 3-D transform of rotateY(180deg).
#card .front {
background: red;
}
#card .back {
background: blue;
-webkit-transform: rotateY(180deg);
}
With the faces in place, the #card requires a corresponding style for when it is flipped.
#card.flipped {
-webkit-transform: rotateY(180deg);
}
Now we have a working 3-D object. To flip the card, we can toggle the flipped class. When .flipped, the #card will rotate 180 degrees, thus exposing the .back face.
See Example: Card 1.
Flipping a card in three dimensions
Slide-flip
Take another look at the Weather App 3-D transition. You’ll notice that it’s not quite the same effect as our previous demo. If you follow the right edge of the card, you’ll find that its corners stay within the container. Instead of pivoting from the horizontal centre, it pivots on that right edge. But the transition is not just a rotation – the edge moves horizontally from right to left. We can reproduce this transition just by modifying a couple of lines of CSS from our original card flip demo.
The pivot point for the rotation occurs at the right side of the card. By default, the transform-origin of an element is at its horizontal and vertical centre (50% 50% or center center). Let’s change it to the right side:
#card { -webkit-transform-origin: right center; }
That flip now needs some horizontal movement with translateX. We’ll set the rotation to -180deg so it flips right side out.
#card.flipped {
-webkit-transform: translateX(-100%) rotateY(-180deg);
}
See Example: Card 2.
Creating a slide-flip from the right edge of the card
Cube
Creating 3-D card objects is a good way to get started with 3-D transforms. But once you’ve mastered them, you’ll be hungry to push it further and create some true 3-D objects: prisms. We’ll start out by making a cube.
The markup for the cube is similar to the card. This time, however, we need six child elements for all six faces of the cube:
<section class="container">
<div id="cube">
<figure class="front">1</figure>
<figure class="back">2</figure>
<figure class="right">3</figure>
<figure class="left">4</figure>
<figure class="top">5</figure>
<figure class="bottom">6</figure>
</div>
</section>
Basic position and size styles set the six faces on top of one another in the container.
.container {
width: 200px;
height: 200px;
position: relative;
-webkit-perspective: 1000;
}
#cube {
width: 100%;
height: 100%;
position: absolute;
-webkit-transform-style: preserve-3d;
}
#cube figure {
width: 196px;
height: 196px;
display: block;
position: absolute;
border: 2px solid black;
}
With the card, we only had to rotate its back face. The cube, however, requires that five of the six faces to be rotated. Faces 1 and 2 will be the front and back. Faces 3 and 4 will be the sides. Faces 5 and 6 will be the top and bottom.
#cube .front { -webkit-transform: rotateY(0deg); }
#cube .back { -webkit-transform: rotateX(180deg); }
#cube .right { -webkit-transform: rotateY(90deg); }
#cube .left { -webkit-transform: rotateY(-90deg); }
#cube .top { -webkit-transform: rotateX(90deg); }
#cube .bottom { -webkit-transform: rotateX(-90deg); }
We could remove the first #cube .front style declaration, as this transform has no effect, but let’s leave it in to keep our code consistent.
Now each face is rotated, and only the front face is visible. The four side faces are all perpendicular to the viewer, so they appear invisible. To push them out to their appropriate sides, they need to be translated out from the centre of their positions. Each side of the cube is 200 pixels wide. From the cube’s centre they’ll need to be translated out half that distance, 100px.
#cube .front { -webkit-transform: rotateY(0deg) translateZ(100px); }
#cube .back { -webkit-transform: rotateX(180deg) translateZ(100px); }
#cube .right { -webkit-transform: rotateY(90deg) translateZ(100px); }
#cube .left { -webkit-transform: rotateY(-90deg) translateZ(100px); }
#cube .top { -webkit-transform: rotateX(90deg) translateZ(100px); }
#cube .bottom { -webkit-transform: rotateX(-90deg) translateZ(100px); }
Note here that the translateZ function comes after the rotate. The order of transform functions is important. Take a moment and soak this up. Each face is first rotated towards its position, then translated outward in a separate vector.
We have a working cube, but we’re not done yet.
Returning to the Z-axis origin
For the sake of our users, our 3-D transforms should not distort the interface when the active panel is at its resting position. But once we start pushing elements off their Z-axis origin, distortion is inevitable.
In order to keep 3-D transforms snappy, Safari composites the element, then applies the transform. Consequently, anti-aliasing on text will remain whatever it was before the transform was applied. When transformed forward in 3-D space, significant pixelation can occur.
See Example: Transforms 2.
Looking back at the Perspective 3 demo, note that no matter how small the perspective value is, or wherever the transform-origin may be, the panel number 1 always returns to its original position, as if all those funky 3-D transforms didn’t even matter.
To resolve the distortion and restore pixel perfection to our #cube, we can push the 3-D object back, so that the front face will be positioned back to the Z-axis origin.
#cube { -webkit-transform: translateZ(-100px); }
See Example: Cube 1.
Restoring the front face to the original position on the Z-axis
Rotating the cube
To expose any face of the cube, we’ll need a style that rotates the cube to expose any face. The transform values are the opposite of those for the corresponding face. We toggle the necessary class on the #box to apply the appropriate transform.
#cube.show-front { -webkit-transform: translateZ(-100px) rotateY(0deg); }
#cube.show-back { -webkit-transform: translateZ(-100px) rotateX(-180deg); }
#cube.show-right { -webkit-transform: translateZ(-100px) rotateY(-90deg); }
#cube.show-left { -webkit-transform: translateZ(-100px) rotateY(90deg); }
#cube.show-top { -webkit-transform: translateZ(-100px) rotateX(-90deg); }
#cube.show-bottom { -webkit-transform: translateZ(-100px) rotateX(90deg); }
Notice how the order of the transform functions has reversed. First, we push the object back with translateZ, then we rotate it.
Finishing up, we can add a transition to animate the rotation between states.
#cube { -webkit-transition: -webkit-transform 1s; }
See Example: Cube 2.
Rotating the cube with a CSS transition
Rectangular prism
Cubes are easy enough to generate, as we only have to worry about one measurement. But how would we handle a non-regular rectangular prism? Let’s try to make one that’s 300 pixels wide, 200 pixels high, and 100 pixels deep.
The markup remains the same as the #cube, but we’ll switch the cube id for #box. The container styles remain mostly the same:
.container {
width: 300px;
height: 200px;
position: relative;
-webkit-perspective: 1000;
}
#box {
width: 100%;
height: 100%;
position: absolute;
-webkit-transform-style: preserve-3d;
}
Now to position the faces. Each set of faces will need their own sizes. The smaller faces (left, right, top and bottom) need to be positioned in the centre of the container, where they can be easily rotated and then shifted outward. The thinner left and right faces get positioned left: 100px ((300 − 100) ÷ 2), The stouter top and bottom faces get positioned top: 50px ((200 − 100) ÷ 2).
#box figure {
display: block;
position: absolute;
border: 2px solid black;
}
#box .front,
#box .back {
width: 296px;
height: 196px;
}
#box .right,
#box .left {
width: 96px;
height: 196px;
left: 100px;
}
#box .top,
#box .bottom {
width: 296px;
height: 96px;
top: 50px;
}
The rotate values can all remain the same as the cube example, but for this rectangular prism, the translate values do differ. The front and back faces are each shifted out 50 pixels since the #box is 100 pixels deep. The translate value for the left and right faces is 150 pixels for their 300 pixels width. Top and bottom panels take 100 pixels for their 200 pixels height:
#box .front { -webkit-transform: rotateY(0deg) translateZ(50px); }
#box .back { -webkit-transform: rotateX(180deg) translateZ(50px); }
#box .right { -webkit-transform: rotateY(90deg) translateZ(150px); }
#box .left { -webkit-transform: rotateY(-90deg) translateZ(150px); }
#box .top { -webkit-transform: rotateX(90deg) translateZ(100px); }
#box .bottom { -webkit-transform: rotateX(-90deg) translateZ(100px); }
See Example: Box 1.
Just like the cube example, to expose a face, the #box needs to have a style to reverse that face’s transform. Both the translateZ and rotate values are the opposites of the corresponding face.
#box.show-front { -webkit-transform: translateZ(-50px) rotateY(0deg); }
#box.show-back { -webkit-transform: translateZ(-50px) rotateX(-180deg); }
#box.show-right { -webkit-transform: translateZ(-150px) rotateY(-90deg); }
#box.show-left { -webkit-transform: translateZ(-150px) rotateY(90deg); }
#box.show-top { -webkit-transform: translateZ(-100px) rotateX(-90deg); }
#box.show-bottom { -webkit-transform: translateZ(-100px) rotateX(90deg); }
See Example: Box 2.
Rotating the rectangular box with a CSS transition
Carousel
Front-end developers have a myriad of choices when it comes to content carousels. Now that we have 3-D capabilities in our browsers, why not take a shot at creating an actual 3-D carousel?
The markup for this demo takes the same form as the box, cube and card. Let’s make it interesting and have a carousel with nine panels.
<div class="container">
<div id="carousel">
<figure>1</figure>
<figure>2</figure>
<figure>3</figure>
<figure>4</figure>
<figure>5</figure>
<figure>6</figure>
<figure>7</figure>
<figure>8</figure>
<figure>9</figure>
</div>
</div>
Now, apply basic layout styles. Let’s give each panel of the #carousel 20 pixel gaps between one another, done here with left: 10px; and top: 10px;. The effective width of each panel is 210 pixels.
.container {
width: 210px;
height: 140px;
position: relative;
-webkit-perspective: 1000;
}
#carousel {
width: 100%;
height: 100%;
position: absolute;
-webkit-transform-style: preserve-3d;
}
#carousel figure {
display: block;
position: absolute;
width: 186px;
height: 116px;
left: 10px;
top: 10px;
border: 2px solid black;
}
Next up: rotating the faces. This #carousel has nine panels. If each panel gets an equal distribution on the carousel, each panel would be rotated forty degrees from its neighbour (360 ÷ 9).
#carousel figure:nth-child(1) { -webkit-transform: rotateY(0deg); }
#carousel figure:nth-child(2) { -webkit-transform: rotateY(40deg); }
#carousel figure:nth-child(3) { -webkit-transform: rotateY(80deg); }
#carousel figure:nth-child(4) { -webkit-transform: rotateY(120deg); }
#carousel figure:nth-child(5) { -webkit-transform: rotateY(160deg); }
#carousel figure:nth-child(6) { -webkit-transform: rotateY(200deg); }
#carousel figure:nth-child(7) { -webkit-transform: rotateY(240deg); }
#carousel figure:nth-child(8) { -webkit-transform: rotateY(280deg); }
#carousel figure:nth-child(9) { -webkit-transform: rotateY(320deg); }
Now, the outward shift. Back when we were creating the cube and box, the translate value was simple to calculate, as it was equal to one half the width, height or depth of the object. With this carousel, there is no size we can automatically use as a reference. We’ll have to calculate the distance of the shift by other means.
Drawing a diagram of the carousel, we can see that we know only two things: the width of each panel is 210 pixels; and the each panel is rotated forty degrees from the next. If we split one of these segments down its centre, we get a right-angled triangle, perfect for some trigonometry.
We can determine the length of r in this diagram with a basic tangent equation:
There you have it: the panels need to be translated 288 pixels in 3-D space.
#carousel figure:nth-child(1) { -webkit-transform: rotateY(0deg) translateZ(288px); }
#carousel figure:nth-child(2) { -webkit-transform: rotateY(40deg) translateZ(288px); }
#carousel figure:nth-child(3) { -webkit-transform: rotateY(80deg) translateZ(288px); }
#carousel figure:nth-child(4) { -webkit-transform: rotateY(120deg) translateZ(288px); }
#carousel figure:nth-child(5) { -webkit-transform: rotateY(160deg) translateZ(288px); }
#carousel figure:nth-child(6) { -webkit-transform: rotateY(200deg) translateZ(288px); }
#carousel figure:nth-child(7) { -webkit-transform: rotateY(240deg) translateZ(288px); }
#carousel figure:nth-child(8) { -webkit-transform: rotateY(280deg) translateZ(288px); }
#carousel figure:nth-child(9) { -webkit-transform: rotateY(320deg) translateZ(288px); }
If we decide to change the width of the panel or the number of panels, we only need to plug in those two variables into our equation to get the appropriate translateZ value. In JavaScript terms, that equation would be:
var tz = Math.round( ( panelSize / 2 ) /
Math.tan( ( ( Math.PI * 2 ) / numberOfPanels ) / 2 ) );
// or simplified to
var tz = Math.round( ( panelSize / 2 ) /
Math.tan( Math.PI / numberOfPanels ) );
Just like our previous 3-D objects, to show any one panel we need only apply the reverse transform on the carousel. Here’s the style to show the fifth panel:
-webkit-transform: translateZ(-288px) rotateY(-160deg);
See Example: Carousel 1.
By now, you probably have two thoughts:
Rewriting transform styles for each panel looks tedious.
Why bother doing high school maths? Aren’t robots supposed to be doing all this work for us?
And you’re absolutely right. The repetitive nature of 3-D objects lends itself to scripting. We can offload all the monotonous transform styles to our dynamic script, which, if done correctly, will be more flexible than the hard-coded version.
See Example: Carousel 2.
Conclusion
3-D transforms change the way we think about the blank canvas of web design. Better yet, they change the canvas itself, trading in the flat surface for voluminous depth.
My hope is that you took at least one peak at a demo and were intrigued. We web designers, who have rejoiced for border-radius, box-shadow and background gradients, now have an incredible tool at our disposal in 3-D transforms. They deserve just the same enthusiasm, research and experimentation we have seen on other CSS3 features. Now is the perfect time to take the plunge and start thinking about how to use three dimensions to elevate our craft. I’m breathless waiting for what’s to come.
See you on the flip side. |
2010 |
David DeSandro |
daviddesandro |
2010-12-14T00:00:00+00:00 |
https://24ways.org/2010/intro-to-css-3d-transforms/ |
code |
| 235 |
Real Animation Using JavaScript, CSS3, and HTML5 Video |
When I was in school to be a 3-D animator, I read a book called Timing for Animation. Though only 152 pages long, it’s essentially the bible for anyone looking to be a great animator. In fact, Pixar chief creative officer John Lasseter used the first edition as a reference when he was an animator at Walt Disney Studios in the early 1980s.
In the book, authors John Halas and Harold Whitaker advise:
Timing is the part of animation which gives meaning to movement. Movement can easily be achieved by drawing the same thing in two different positions and inserting a number of other drawings between the two. The result on the screen will be movement; but it will not be animation.
But that’s exactly what we’re doing with CSS3 and JavaScript: we’re moving elements, not animating them. We’re constantly specifying beginning and end states and allowing the technology to interpolate between the two. And yet, it’s the nuances within those middle frames that create the sense of life we’re looking for.
As bandwidth increases and browser rendering grows more consistent, we can create interactions in different ways than we’ve been able to before. We’re encountering motion more and more on sites we’d generally label ‘static.’ However, this motion is mostly just movement, not animation. It’s the manipulation of an element’s properties, most commonly width, height, x- and y-coordinates, and opacity.
So how do we create real animation?
The metaphor
In my experience, animation is most believable when it simulates, exaggerates, or defies the real world. A bowling ball falls differently than a racquetball. They each have different weights and sizes, which affect the way they land, bounce, and impact other objects.
This is a major reason that JavaScript animation frequently feels mechanical; it doesn’t complete a metaphor. Expanding and collapsing a <div> feels very different than a opening a door or unfolding a piece of paper, but it often shouldn’t. The interaction itself should tie directly to the art direction of a page.
Physics
Understanding the physics of a situation is key to creating convincing animation, even if your animation seeks to defy conventional physics. Isaac Newton’s first law of motion’s_laws_of_motion states, “Every body remains in a state of rest or uniform motion (constant velocity) unless it is acted upon by an external unbalanced force.” Once a force acts upon an object, the object’s shape can change accordingly, depending on the strength of the force and the mass of the object. Another nugget of wisdom from Halas and Whitaker:
All objects in nature have their own weight, construction, and degree of flexibility, and therefore each behaves in its own individual way when a force acts upon it. This behavior, a combination of position and timing, is the basis of animation. The basic question which an animator is continually asking himself is this: “What will happen to this object when a force acts upon it?” And the success of his animation largely depends on how well he answers this question.
In animating with CSS3 and JavaScript, keep physics in mind. How ‘heavy’ is the element you’re interacting with? What kind of force created the action? A gentle nudge? A forceful shove? These subtleties will add a sense of realism to your animations and make them much more believable to your users.
Misdirection
Magicians often use misdirection to get their audience to focus on one thing rather than another. They fool us into thinking something happened that actually didn’t.
Animation is the same, especially on a screen. By changing the arrangement of pixels on screen at a fast enough rate, your eyes fool your mind into thinking an object is actually in motion.
Another important component of misdirecting in animation is the use of multiple objects. Try to recall a cartoon where a character vanishes. More often, the character makes some sort of exaggerated motion (this is called anticipation) then disappears, and a puff a smoke follows. That smoke is an extra element, but it goes a long way into make you believe that character actually disappeared.
Very rarely does a vanishing character’s opacity simply go from one hundred per cent to zero. That’s not believable. So why do we do it with <div>s?
Armed with the ammunition of metaphors and misdirection, let’s code an example.
Shake, rattle, and roll
(These demos require at least a basic understanding of jQuery and CSS3. Run away if your’re afraid, or brush up on CSS animation and resources for learning jQuery. Also, these demos use WebKit-specific features and are best viewed in the latest version of Safari, so performance in other browsers may vary.)
We often see the design pattern of clicking a link to reveal content. Our “first demo”:”/examples/2010/real-animation/demo1/ shows us exactly that. It uses jQuery’s “ slideDown()”:http://api.jquery.com/slideDown/ method, as many instances do.
But what force acted on the <div> that caused it to open? Did pressing the button unlatch some imaginary hook? Did it activate an unlocking sequence with some gears?
Take 2
Our second demo is more explicit about what happens: the button fell on the <div> and shook its content loose. Here’s how it’s done.
function clickHandler(){
$('#button').addClass('animate');
return false;
}
Clicking the link adds a class of animate to our button. That class has the following CSS associated with it:
<style>
.animate {
-webkit-animation-name: ANIMATE;
-webkit-animation-duration: 0.25s;
-webkit-animation-iteration-count: 1;
-webkit-animation-timing-function: ease-in;
}
@-webkit-keyframes ANIMATE {
from {
top: 72px;
}
to {
top: 112px;
}
}
</style>
In our keyframe definition, we’ve specified from and to states. This is great, because we can be explicit about how an object starts and finishes moving.
What’s also extra handy is that these CSS keyframes broadcast events that you can react to with JavaScript. In this example, we’re listening to the webkitAnimationEnd event and opening the <div> only when the sequence is complete. Here’s that code.
function attachAnimationEventHandlers(){
var wrap = document.getElementById('wrap');
wrap.addEventListener('webkitAnimationEnd', function($e) {
switch($e.animationName){
case "ANIMATE" :
openMain();
break;
default:
}
}, false);
}
function openMain(){
$('#main .inner').slideDown('slow');
}
(For more info on handling animation events, check out the documentation at the Safari Reference Library.)
Take 3
The problem with the previous demo is that the subtleties of timing aren’t evident. It still feels a bit choppy.
For our third demo, we’ll use percentages instead of keywords so that we can insert as many points as we need to communicate more realistic timing. The percentages allow us to add the keys to well-timed animation: anticipation, hold, release, and reaction.
<style>
@-webkit-keyframes ANIMATE {
0% {
top: 72px;
}
40% { /* anticipation */
top: 57px;
}
70% { /* hold */
top: 56px;
}
80% { /* release */
top: 112px;
}
100% { /* return */
top: 72px;
}
}
</style>
Take 4
The button animation is starting to feel much better, but the reaction of the <div> opening seems a bit slow.
This fourth demo uses jQuery’s delay() method to time the opening precisely when we want it. Since we know the button’s animation is one second long and its reaction starts at eighty per cent of that, that puts our delay at 800ms (eighty per cent of one second). However, here’s a little pro tip: let’s start the opening at 750ms instead. The extra fifty milliseconds makes it feel more like the opening is a reaction to the exact hit of the button. Instead of listening for the webkitAnimationEnd event, we can start the opening as soon as the button is clicked, and the movement plays on the specified delay.
function clickHandler(){
$('#button').addClass('animate');
openMain();
return false;
}
function openMain(){
$('#main .inner').delay(750).slideDown('slow');
}
Take 5
We can tweak the timing of that previous animation forever, but that’s probably as close as we’re going to get to realistic animation with CSS and JavaScript. However, for some extra sauce, we could relegate the whole animation in our final demo to a video sequence which includes more nuances and extra elements for misdirection.
Here’s the basis of video replacement. Add a <video> element to the page and adjust its opacity to zero. Once the button is clicked, fade the button out and start playing the video. Once the video is finished playing, fade it out and bring the button back.
function clickHandler(){
if($('#main .inner').is(':hidden')){
$('#button').fadeTo(100, 0);
$('#clickVideo').fadeTo(100, 1, function(){
var clickVideo = document.getElementById('clickVideo');
clickVideo.play();
setTimeout(removeVideo, 2400);
openMain();
});
}
return false;
}
function removeVideo(){
$('#button').fadeTo(500, 1);
$('#clickVideo').fadeOut('slow');
}
function openMain(){
$('#main .inner').delay(1100).slideDown('slow');
}
Wrapping up
I’m no JavaScript expert by any stretch. I’m sure a lot of you scripting wizards out there could write much cleaner and more efficient code, but I hope this gives you an idea of the theory behind more realistic motion with the technology we’re using most. This is just one model of creating more convincing animation, but you can create countless variations of this, including…
Exporting <video> animations in 3-D animation tools or 2-D animation tools like Flash or After Effects
Using <canvas> or SVG instead of <video>
Employing specific JavaScript animation frameworks
Making use of all the powerful properties of CSS Transforms and CSS Animation
Trying out emerging CSS3 animation tools like Sencha Animator
If it wasn’t already apparent, these demos show an exaggerated example and probably aren’t practical in a lot of environments. However, there are a handful of great sites out there that honor animation techniques—metaphor, physics, and misdirection, among others—like Benjamin De Cock’s vCard, 20 Things I Learned About Browsers and the Web by Fantasy Interactive, and the Nike Snowboarding site by Ian Coyle and HEGA. They’re wonderful testaments to what you can do to aid interaction for users.
My goal was to show you the ‘why’ and the ‘how.’ Your charge is to discern the ‘where’ and the ‘when.’ Happy animating! |
2010 |
Dan Mall |
danmall |
2010-12-15T00:00:00+00:00 |
https://24ways.org/2010/real-animation-using-javascript-css3-and-html5-video/ |
code |
| 238 |
Everything You Wanted To Know About Gradients (And a Few Things You Didn’t) |
Hello. I am here to discuss CSS3 gradients. Because, let’s face it, what the web really needed was more gradients.
Still, despite their widespread use (or is it overuse?), the smartly applied gradient can be a valuable contributor to a designer’s vocabulary. There’s always been a tension between the inherently two-dimensional nature of our medium, and our desire for more intensity, more depth in our designs. And a gradient can evoke so much: the splay of light across your desk, the slow decrease in volume toward the end of your favorite song, the sunset after a long day. When properly applied, graded colors bring a much needed softness to our work.
Of course, that whole ‘proper application’ thing is the tricky bit.
But given their place in our toolkit and their prominence online, it really is heartening to see we can create gradients directly with CSS. They’re part of the draft images module, and implemented in two of the major rendering engines.
Still, I’ve always found CSS gradients to be one of the more confusing aspects of CSS3. So if you’ll indulge me, let’s take a quick look at how to create CSS gradients—hopefully we can make them seem a bit more accessible, and bring a bit more art into the browser.
Gradient theory 101 (I hope that’s not really a thing)
Right. So before we dive into the code, let’s cover a few basics. Every gradient, no matter how complex, shares a few common characteristics. Here’s a straightforward one:
I spent seconds hours designing this gradient. I hope you like it.
At either end of our image, we have a final color value, or color stop: on the left, our stop is white; on the right, black. And more color-rich gradients are no different:
(Don’t ever really do this. Please. I beg you.)
It’s visually more intricate, sure. But at the heart of it, we have just seven color stops (red, orange, yellow, and so on), making for a fantastic gradient all the way.
Now, color stops alone do not a gradient make. Between each is a transition point, the fail-over point between the two stops. Now, the transition point doesn’t need to fall exactly between stops: it can be brought closer to one stop or the other, influencing the overall shape of the gradient.
A tale of two syntaxes
Armed with our new vocabulary, let’s look at a CSS gradient in the wild. Behold, the simple input button:
There’s a simple linear gradient applied vertically across the button, moving from a bright sunflowerish hue (#FAA51A, for you hex nuts in the audience) to a much richer orange (#F47A20). And here’s the CSS that makes it happen:
input[type=submit] {
background-color: #F47A20;
background-image: -moz-linear-gradient(
#FAA51A,
#F47A20
);
background-image: -webkit-gradient(linear, 0 0, 0 100%,
color-stop(0, #FAA51A),
color-stop(1, #F47A20)
);
}
I’ve borrowed David DeSandro’s most excellent formatting suggestions for gradients to make this snippet a bit more legible but, still, the code above might have turned your stomach a bit. And that’s perfectly understandable—heck, it sort of turned mine. But let’s step through the CSS slowly, and see if we can’t make it a little less terrifying.
Verbose WebKit is verbose
Here’s the syntax for our little gradient on WebKit:
background-image: -webkit-gradient(linear, 0 0, 0 100%,
color-stop(0, #FAA51A),
color-stop(1, #F47A20)
);
Woof. Quite a mouthful, no? Well, here’s what we’re looking at:
WebKit has a single -webkit-gradient property, which can be used to create either linear or radial gradients.
The next two values are the starting and ending positions for our gradient (0 0 and 0 100%, respectively). Linear gradients are simply drawn along the path between those two points, which allows us to change the direction of our gradient simply by altering its start and end points.
Afterward, we specify our color stops with the oh-so-aptly named color-stop parameter, which takes the stop’s position on the gradient (0 being the beginning, and 100% or 1 being the end) and the color itself.
For a simple two-color gradient like this, -webkit-gradient has a bit of shorthand notation to offer us:
background-image: -webkit-gradient(linear, 0 0, 0 100%,
from(#FAA51A),
to(#FAA51A)
);
from(#FAA51A) is equivalent to writing color-stop(0, #FAA51A), and to(#FAA51A) is the same as color-stop(1, #FAA51A) or color-stop(100%, #FAA51A)—in both cases, we’re simply declaring the first and last color stops in our gradient.
Terse Gecko is terse
WebKit proposed its syntax back in 2008, heavily inspired by the way gradients are drawn in the canvas specification. However, a different, leaner syntax came to the fore, eventually appearing in a draft module specification in CSS3.
Naturally, because nothing on the web was meant to be easy, this is the one that Mozilla has implemented.
Here’s how we get gradient-y in Gecko:
background-image: -moz-linear-gradient(
#FAA51A,
#F47A20
);
Wait, what? Done already? That’s right. By default, -moz-linear-gradient assumes you’re trying to create a vertical gradient, starting from the top of your element and moving to the bottom. And, if that’s the case, then you simply need to specify your color stops, delimited with a few commas.
I know: that was almost… painless. But the W3C/Mozilla syntax also affords us a fair amount of flexibility and control, by introducing features as we need them.
We can specify an origin point for our gradient:
background-image: -moz-linear-gradient(50% 100%,
#FAA51A,
#F47A20
);
As well as an angle, to give it a direction:
background-image: -moz-linear-gradient(50% 100%, 45deg,
#FAA51A,
#F47A20
);
And we can specify multiple stops, simply by adding to our comma-delimited list:
background-image: -moz-linear-gradient(50% 100%, 45deg,
#FAA51A,
#FCC,
#F47A20
);
By adding a percentage after a given color value, we can determine its position along the gradient path:
background-image: -moz-linear-gradient(50% 100%, 45deg,
#FAA51A,
#FCC 20%,
#F47A20
);
So that’s some of the flexibility implicit in the W3C/Mozilla-style syntax.
Now, I should note that both syntaxes have their respective fans. I will say that the W3C/Mozilla-style syntax makes much more sense to me, and lines up with how I think about creating gradients. But I can totally understand why some might prefer WebKit’s more verbose approach to the, well, looseness behind the -moz syntax. À chacun son gradient syntax.
Still, as the language gets refined by the W3C, I really hope some consensus is reached by the browser vendors. And with Opera signaling that it will support the W3C syntax, I suppose it falls on WebKit to do the same.
Reusing color stops for fun and profit
But CSS gradients aren’t all simple colors and shapes and whatnot: by getting inventive with individual color stops, you can create some really complex, compelling effects.
Tim Van Damme, whose brain, I believe, should be posthumously donated to science, has a particularly clever application of gradients on The Box, a site dedicated to his occasional podcast series. Now, there are a fair number of gradients applied throughout the UI, but it’s the feature image that really catches the eye.
You see, there’s nothing that says you can’t reuse color stops. And Tim’s exploited that perfectly.
He’s created a linear gradient, angled at forty-five degrees from the top left corner of the photo, starting with a fully transparent white (rgba(255, 255, 255, 0)). At the halfway mark, he’s established another color stop at an only slightly more opaque white (rgba(255, 255, 255, 0.1)), making for that incredibly gradual brightening toward the middle of the photo.
But then he has set another color stop immediately on top of it, bringing it back down to rgba(255, 255, 255, 0) again. This creates that fantastically hard edge that diagonally bisects the photo, giving the image that subtle gloss.
And his final color stop ends at the same fully transparent white, completing the effect. Hot? I do believe so.
Rocking the radials
We’ve been looking at linear gradients pretty exclusively. But I’d be remiss if I didn’t at least mention radial gradients as a viable option, including a modest one as a link accent on a navigation bar:
And here’s the relevant CSS:
background: -moz-radial-gradient(50% 100%, farthest-side,
rgb(204, 255, 255) 1%,
rgb(85, 85, 85) 15%,
rgba(85, 85, 85, 0)
);
background: -webkit-gradient(radial, 50% 100%, 0, 50% 100%, 15,
from(rgb(204, 255, 255)),
to(rgba(85, 85, 85, 0))
);
Now, the syntax builds on what we’ve already learned about linear gradients, so much of it might be familiar to you, picking out color stops and transition points, as well as the two syntaxes’ reliance on either a separate property (-moz-radial-gradient) or parameter (-webkit-gradient(radial, …)) to shift into circular mode.
Mozilla introduces another stand-alone property (-moz-radial-gradient), and accepts a starting point (50% 100%) from which the circle radiates. There’s also a size constant defined (farthest-side), which determines the reach and shape of our gradient.
WebKit is again the more verbose of the two syntaxes, requiring both starting and ending points (50% 100% in both cases). Each also accepts a radius in pixels, allowing you to control the skew and breadth of the circle.
Again, this is a fairly modest little radial gradient. Time and article length (and, let’s be honest, your author’s completely inadequate grasp of geometry) prevent me from covering radial gradients in much more detail, because they are incredibly powerful. For those interested in learning more, I can’t recommend the references at Mozilla and Apple strongly enough.
Leave no browser behind
But no matter the kind of gradients you’re working with, there is a large swathe of browsers that simply don’t support gradients. Thankfully, it’s fairly easy to declare a sensible fallback—it just depends on the kind of fallback you’d like. Essentially, gradient-blind browsers will disregard any properties containing references to either -moz-linear-gradient, -moz-radial-gradient, or -webkit-gradient, so you simply need to keep your fallback isolated from those properties.
For example: if you’d like to fall back to a flat color, simply declare a separate background-color:
.nav {
background-color: #000;
background-image: -moz-linear-gradient(rgba(0, 0, 0, 0), rgba(255, 255, 255, 0.45));
background-image: -webkit-gradient(linear, 0 0, 0 100%, from(rgba(0, 0, 0, 0)), to(rgba(255, 255, 255, 0.45)));
}
Or perhaps just create three separate background properties.
.nav {
background: #000;
background: #000 -moz-linear-gradient(rgba(0, 0, 0, 0), rgba(255, 255, 255, 0.45));
background: #000 -webkit-gradient(linear, 0 0, 0 100%, from(rgba(0, 0, 0, 0)), to(rgba(255, 255, 255, 0.45)));
}
We can even build on this to fall back to a non-gradient image:
.nav {
background: #000 <strong>url("faux-gradient-lol.png") repeat-x</strong>;
background: #000 -moz-linear-gradient(rgba(0, 0, 0, 0), rgba(255, 255, 255, 0.45));
background: #000 -webkit-gradient(linear, 0 0, 0 100%, from(rgba(0, 0, 0, 0)), to(rgba(255, 255, 255, 0.45)));
}
No matter the approach you feel most appropriate to your design, it’s really just a matter of keeping your fallback design quarantined from its CSS3-ified siblings.
(If you’re feeling especially masochistic, there’s even a way to get simple linear gradients working in IE via Microsoft’s proprietary filters. Of course, those come with considerable performance penalties that even Microsoft is quick to point out, so I’d recommend avoiding those.
And don’t tell Andy Clarke I told you, or he’ll probably unload his Derringer at me. Or something.)
Go forth and, um, gradientify!
It’s entirely possible your head’s spinning. Heck, mine is, but that might be the effects of the ’nog. But maybe you’re wondering why you should care about CSS gradients. After all, images are here right now, and work just fine.
Well, there are some quick benefits that spring to mind: fewer HTTP requests are needed; CSS3 gradients are easily made scalable, making them ideal for variable widths and heights; and finally, they’re easily modifiable by tweaking a few CSS properties. Because, let’s face it, less time spent yelling at Photoshop is a very, very good thing.
Of course, CSS-generated gradients are not without their drawbacks. The syntax can be confusing, and it’s still under development at the W3C. As we’ve seen, browser support is still very much in flux. And it’s possible that gradients themselves have some real performance drawbacks—so test thoroughly, and gradient carefully.
But still, as syntaxes converge, and support improves, I think generated gradients can make a compelling tool in our collective belts. The tasteful design is, of course, entirely up to you.
So have fun, and get gradientin’. |
2010 |
Ethan Marcotte |
ethanmarcotte |
2010-12-22T00:00:00+00:00 |
https://24ways.org/2010/everything-you-wanted-to-know-about-gradients/ |
code |
| 239 |
Using the WebFont Loader to Make Browsers Behave the Same |
Web fonts give us designers a whole new typographic palette with which to work. However, browsers handle the loading of web fonts in different ways, and this can lead to inconsistent user experiences.
Safari, Chrome and Internet Explorer leave a blank space in place of the styled text while the web font is loading. Opera and Firefox show text with the default font which switches over when the web font has loaded, resulting in the so-called Flash of Unstyled Text (aka FOUT). Some people prefer Safari’s approach as it eliminates FOUT, others think the Firefox way is more appropriate as content can be read whilst fonts download. Whatever your preference, the WebFont Loader can make all browsers behave the same way.
The WebFont Loader is a JavaScript library that gives you extra control over font loading. It was co-developed by Google and Typekit, and released as open source. The WebFont Loader works with most web font services as well as with self-hosted fonts.
The WebFont Loader tells you when the following events happen as a browser downloads web fonts (or loads them from cache):
when fonts start to download (‘loading’)
when fonts finish loading (‘active’)
if fonts fail to load (‘inactive’)
If your web page requires more than one font, the WebFont Loader will trigger events for individual fonts, and for all the fonts as a whole. This means you can find out when any single font has loaded, and when all the fonts have loaded (or failed to do so).
The WebFont Loader notifies you of these events in two ways: by applying special CSS classes when each event happens; and by firing JavaScript events. For our purposes, we’ll be using just the CSS classes.
Implementing the WebFont Loader
As stated above, the WebFont Loader works with most web font services as well as with self-hosted fonts.
Self-hosted fonts
To use the WebFont Loader when you are hosting the font files on your own server, paste the following code into your web page:
<script type="text/javascript">
WebFontConfig = {
custom: { families: ['Font Family Name', 'Another Font Family'],
urls: [ 'http://yourwebsite.com/styles.css' ] }
};
(function() {
var wf = document.createElement('script');
wf.src = ('https:' == document.location.protocol ? 'https' : 'http') + '://ajax.googleapis.com/ajax/libs/webfont/1/webfont.js';
wf.type = 'text/javascript';
wf.async = 'true';
var s = document.getElementsByTagName('script')[0];
s.parentNode.insertBefore(wf, s);
})();
</script>
Replace Font Family Name and Another Font Family with a comma-separated list of the font families you want to check against, and replace http://yourwebsite.com/styles.css with the URL of the style sheet where your @font-face rules reside.
Fontdeck
Assuming you have added some fonts to a website project in Fontdeck, use the afore-mentioned code for self-hosted solutions and replace http://yourwebsite.com/styles.css with the URL of the <link> tag in your Fontdeck website settings page. It will look something like http://f.fontdeck.com/s/css/xxxx/domain/nnnn.css.
Typekit
Typekit’s JavaScript-based implementation incorporates the WebFont Loader events by default, so you won’t need to include any WebFont Loader code.
Making all browsers behave like Safari
To make Firefox and Opera work in the same way as WebKit browsers (Safari, Chrome, etc.) and Internet Explorer, and thus minimise FOUT, you need to hide the text while the fonts are loading.
While fonts are loading, the WebFont Loader adds a class of wf-loading to the <html> element. Once the fonts have loaded, the wf-loading class is removed and replaced with a class of wf-active (or wf-inactive if all of the fonts failed to load). This means you can style elements on the page while the fonts are loading and then style them differently when the fonts have finished loading.
So, let’s say the text you need to hide while fonts are loading is contained in all paragraphs and top-level headings. By writing the following style rule into your CSS, you can hide the text while the fonts are loading:
.wf-loading h1, .wf-loading p {
visibility:hidden;
}
Because the wf-loading class is removed once the the fonts have loaded, the visibility:hidden rule will stop being applied, and the text revealed. You can see this in action on this simple example page.
That works nicely across the board, but the situation is slightly more complicated. WebKit doesn’t wait for all fonts to load before displaying text: it displays text elements as soon as the relevant font is loaded.
To emulate WebKit more accurately, we need to know when individual fonts have loaded, and apply styles accordingly. Fortunately, as mentioned earlier, the WebFont Loader has events for individual fonts too.
When a specific font is loading, a class of the form wf-fontfamilyname-n4-loading is applied. Assuming headings and paragraphs are styled in different fonts, we can make our CSS more specific as follows:
.wf-fontfamilyname-n4-loading h1,
.wf-anotherfontfamily-n4-loading p {
visibility:hidden;
}
Note that the font family name is transformed to lower case, with all spaces removed. The n4 is a shorthand for the weight and style of the font family. In most circumstances you’ll use n4 but refer to the WebFont Loader documentation for exceptions.
You can see it in action on this Safari example page (you’ll probably need to disable your cache to see any change occur).
Making all browsers behave like Firefox
To make WebKit browsers and Internet Explorer work like Firefox and Opera, you need to explicitly show text while the fonts are loading. In order to make this happen, you need to specify a font family which is not a web font while the fonts load, like this:
.wf-fontfamilyname-n4-loading h1 {
font-family: 'arial narrow', sans-serif;
}
.wf-anotherfontfamily-n4-loading p {
font-family: arial, sans-serif;
}
You can see this in action on the Firefox example page (again you’ll probably need to disable your cache to see any change occur).
And there’s more
That’s just the start of what can be done with the WebFont Loader. More areas to explore would be tweaking font sizes to reduce the impact of reflowing text and to better cater for very narrow fonts. By using the JavaScript events much more can be achieved too, such as fading in text as the fonts load. |
2010 |
Richard Rutter |
richardrutter |
2010-12-02T00:00:00+00:00 |
https://24ways.org/2010/using-the-webfont-loader-to-make-browsers-behave-the-same/ |
code |
| 240 |
My CSS Wish List |
I love Christmas. I love walking around the streets of London, looking at the beautifully decorated windows, seeing the shiny lights that hang above Oxford Street and listening to Christmas songs.
I’m not going to lie though. Not only do I like buying presents, I love receiving them too. I remember making long lists that I would send to Father Christmas with all of the Lego sets I wanted to get. I knew I could only get one a year, but I would spend days writing the perfect list.
The years have gone by, but I still enjoy making wish lists. And I’ll tell you a little secret: my mum still asks me to send her my Christmas list every year.
This time I’ve made my CSS wish list. As before, I’d be happy with just one present.
Before I begin…
… this list includes:
things that don’t exist in the CSS specification (if they do, please let me know in the comments – I may have missed them);
others that are in the spec, but it’s incomplete or lacks use cases and examples (which usually means that properties haven’t been implemented by even the most recent browsers).
Like with any other wish list, the further down I go, the more unrealistic my expectations – but that doesn’t mean I can’t wish. Some of the things we wouldn’t have thought possible a few years ago have been implemented and our wishes fulfilled (think multiple backgrounds, gradients and transformations, for example).
The list
Cross-browser implementation of font-size-adjust
When one of the fall-back fonts from your font stack is used, rather than the preferred (first) one, you can retain the aspect ratio by using this very useful property. It is incredibly helpful when the fall-back fonts are smaller or larger than the initial one, which can make layouts look less polished.
What font-size-adjust does is divide the original font-size of the fall-back fonts by the font-size-adjust value. This preserves the x-height of the preferred font in the fall-back fonts. Here’s a simple example:
p {
font-family: Calibri, "Lucida Sans", Verdana, sans-serif;
font-size-adjust: 0.47;
}
In this case, if the user doesn’t have Calibri installed, both Lucida Sans and Verdana will keep Calibri’s aspect ratio, based on the font’s x-height. This property is a personal favourite and one I keep pointing to.
Firefox supported this property from version three. So far, it’s the only browser that does. Fontdeck provides the font-size-adjust value along with its fonts, and has a handy tool for calculating it.
More control over overflowing text
The text-overflow property lets you control text that overflows its container. The most common use for it is to show an ellipsis to indicate that there is more text than what is shown. To be able to use it, the container should have overflow set to something other than visible, and white-space: nowrap:
div {
white-space: nowrap;
width: 100%;
overflow: hidden;
text-overflow: ellipsis;
}
This, however, only works for blocks of text on a single line. In the wish list of many CSS authors (and in mine) is a way of defining text-overflow: ellipsis on a block of multiple text lines. Opera has taken the first step and added support for the -o-ellipsis-lastline property, which can be used instead of ellipsis. This property is not part of the CSS3 spec, but we could certainly make good use of it if it were…
WebKit has -webkit-line-clamp to specify how many lines to show before cutting with an ellipsis, but support is patchy at best and there is no control over where the ellipsis shows in the text. Many people have spent time wrangling JavaScript to do this for us, but the methods used are very processor intensive, and introduce a JavaScript dependency.
Indentation and hanging punctuation properties
You might notice a trend here: almost half of the items in this list relate to typography. The lack of fine-grained control over typographical detail is a general concern among designers and CSS authors. Indentation and hanging punctuation fall into this category.
The CSS3 specification introduces two new possible values for the text-indent property: each-line; and hanging. each-line would indent the first line of the block container and each line after a forced line break; hanging would invert which lines are affected by the indentation.
The proposed hanging-punctuation property would allow us to specify whether opening and closing brackets and quotes should hang outside the edge of the first and last lines. The specification is still incomplete, though, and asks for more examples and use cases.
Text alignment and hyphenation properties
Following the typographic trend of this list, I’d like to add better control over text alignment and hyphenation properties. The CSS3 module on Generated Content for Paged Media already specifies five new hyphenation-related properties (namely: hyphenate-dictionary; hyphenate-before and hyphenate-after; hyphenate-lines; and hyphenate-character), but it is still being developed and lacks examples.
In the text alignment realm, the new text-align-last property allows you to define how the last line of a block (or a line just before a forced break) is aligned, if your text is set to justify. Its value can be: start; end; left; right; center; and justify. The text-justify property should also allow you to have more control over text set to text-align: justify but, for now, only Internet Explorer supports this.
calc()
This is probably my favourite item in the list: the calc() function. This function is part of the CSS3 Values and Units module, but it has only been implemented by Firefox (4.0). To take advantage of it now you need to use the Mozilla vendor code, -moz-calc().
Imagine you have a fluid two-column layout where the sidebar column has a fixed width of 240 pixels, and the main content area fills the rest of the width available. This is how you could create that using -moz-calc():
#main {
width: -moz-calc(100% - 240px);
}
Can you imagine how many hacks and headaches we could avoid were this function available in more browsers? Transitions and animations are really nice and lovely but, for me, it’s the ability to do the things that calc() allows you to that deserves the spotlight and to be pushed for implementation.
Selector grouping with -moz-any()
The -moz-any() selector grouping has been introduced by Mozilla but it’s not part of any CSS specification (yet?); it’s currently only available on Firefox 4.
This would be especially useful with the way HTML5 outlines documents, where we can have any number of variations of several levels of headings within numerous types of containers (think sections within articles within sections…).
Here is a quick example (copied from the Mozilla blog post about the article) of how -moz-any() works. Instead of writing:
section section h1, section article h1, section aside h1,
section nav h1, article section h1, article article h1,
article aside h1, article nav h1, aside section h1,
aside article h1, aside aside h1, aside nav h1, nav section h1,
nav article h1, nav aside h1, nav nav h1, {
font-size: 24px;
}
You could simply write:
-moz-any(section, article, aside, nav)
-moz-any(section, article, aside, nav) h1 {
font-size: 24px;
}
Nice, huh?
More control over styling form elements
Some are of the opinion that form elements shouldn’t be styled at all, since a user might not recognise them as such if they don’t match the operating system’s controls. I partially agree: I’d rather put the choice in the hands of designers and expect them to be capable of deciding whether their particular design hampers or improves usability.
I would say the same idea applies to font-face: while some fear designers might go crazy and litter their web pages with dozens of different fonts, most welcome the freedom to use something other than Arial or Verdana.
There will always be someone who will take this freedom too far, but it would be useful if we could, for example, style the default Opera date picker:
<input type="date" />
or Safari’s slider control (think star movie ratings, for example):
<input type="range" min="0" max="5" step="1" value="3" />
Parent selector
I don’t think there is one CSS author out there who has never come across a case where he or she wished there was a parent selector. There have been many suggestions as to how this could work, but a variation of the child selector is usually the most popular:
article < h1 {
…
}
One can dream…
Flexible box layout
The Flexible Box Layout Module sounds a bit like magic: it introduces a new box model to CSS, allowing you to distribute and order boxes inside other boxes, and determine how the available space is shared.
Two of my favourite features of this new box model are:
the ability to redistribute boxes in a different order from the markup
the ability to create flexible layouts, where boxes shrink (or expand) to fill the available space
Let’s take a quick look at the second case. Imagine you have a three-column layout, where the first column takes up twice as much horizontal space as the other two:
<body>
<section id="main">
</section>
<section id="links">
</section>
<aside>
</aside>
</body>
With the flexible box model, you could specify it like this:
body {
display: box;
box-orient: horizontal;
}
#main {
box-flex: 2;
}
#links {
box-flex: 1;
}
aside {
box-flex: 1;
}
If you decide to add a fourth column to this layout, there is no need to recalculate units or percentages, it’s as easy as that.
Browser support for this property is still in its early stages (Firefox and WebKit need their vendor prefixes), but we should start to see it being gradually introduced as more attention is drawn to it (I’m looking at you…). You can read a more comprehensive write-up about this property on the Mozilla developer blog.
It’s easy to understand why it’s harder to start playing with this module than with things like animations or other more decorative properties, which don’t really break your layouts when users don’t see them. But it’s important that we do, even if only in very experimental projects.
Nested selectors
Anyone who has never wished they could do something like the following in CSS, cast the first stone:
article {
h1 { font-size: 1.2em; }
ul { margin-bottom: 1.2em; }
}
Even though it can easily turn into a specificity nightmare and promote redundancy in your style sheets (if you abuse it), it’s easy to see how nested selectors could be useful. CSS compilers such as Less or Sass let you do this already, but not everyone wants or can use these compilers in their projects.
Every wish list has an item that could easily be dropped. In my case, I would say this is one that I would ditch first – it’s the least useful, and also the one that could cause more maintenance problems. But it could be nice.
Implementation of the ::marker pseudo-element
The CSS Lists module introduces the ::marker pseudo-element, that allows you to create custom list item markers. When an element’s display property is set to list-item, this pseudo-element is created.
Using the ::marker pseudo-element you could create something like the following:
Footnote 1: Both John Locke and his father, Anthony Cooper, are
named after 17th- and 18th-century English philosophers; the real
Anthony Cooper was educated as a boy by the real John Locke.
Footnote 2: Parts of the plane were used as percussion instruments
and can be heard in the soundtrack.
where the footnote marker is generated by the following CSS:
li::marker {
content: "Footnote " counter(notes) ":";
text-align: left;
width: 12em;
}
li {
counter-increment: notes;
}
You can read more about how to use counters in CSS in my article from last year.
Bear in mind that the CSS Lists module is still a Working Draft and is listed as “Low priority”. I did say this wish list would start to grow more unrealistic closer to the end…
Variables
The sight of the word ‘variables’ may make some web designers shy away, but when you think of them applied to things such as repeated colours in your stylesheets, it’s easy to see how having variables available in CSS could be useful.
Think of a website where the main brand colour is applied to elements like the main text, headings, section backgrounds, borders, and so on. In a particularly large website, where the colour is repeated countless times in the CSS and where it’s important to keep the colour consistent, using variables would be ideal (some big websites are already doing this by using server-side technology).
Again, Less and Sass allow you to use variables in your CSS but, again, not everyone can (or wants to) use these.
If you are using Less, you could, for instance, set the font-family value in one variable, and simply call that variable later in the code, instead of repeating the complete font stack, like so:
@fontFamily: Calibri, "Lucida Grande", "Lucida Sans Unicode", Helvetica, Arial, sans-serif;
body {
font-family: @fontFamily;
}
Other features of these CSS compilers might also be useful, like the ability to ‘call’ a property value from another selector (accessors):
header {
background: #000000;
}
footer {
background: header['background'];
}
or the ability to define functions (with arguments), saving you from writing large blocks of code when you need to write something like, for example, a CSS gradient:
.gradient (@start:"", @end:"") {
background: -webkit-gradient(linear, left top, left bottom, from(@start), to(@end));
background: -moz-linear-gradient(-90deg,@start,@end);
}
button {
.gradient(#D0D0D0,#9F9F9F);
}
Standardised comments
Each CSS author has his or her own style for commenting their style sheets. While this isn’t a massive problem on smaller projects, where maybe only one person will edit the CSS, in larger scale projects, where dozens of hands touch the code, it would be nice to start seeing a more standardised way of commenting.
One attempt at creating a standard for CSS comments is CSSDOC, an adaptation of Javadoc (a documentation generator that extracts comments from Java source code into HTML). CSSDOC uses ‘DocBlocks’, a term borrowed from the phpDocumentor Project. A DocBlock is a human- and machine-readable block of data which has the following structure:
/**
* Short description
*
* Long description (this can have multiple lines and contain <p> tags
*
* @tags (optional)
*/
CSSDOC includes a standard for documenting bug fixes and hacks, colours, versioning and copyright information, amongst other important bits of data.
I know this isn’t a CSS feature request per se; rather, it’s just me pointing you at something that is usually overlooked but that could contribute towards keeping style sheets easier to maintain and to hand over to new developers.
Final notes
I understand that if even some of these were implemented in browsers now, it would be a long time until all vendors were up to speed. But if we don’t talk about them and experiment with what’s available, then it will definitely never happen.
Why haven’t I mentioned better browser support for existing CSS3 properties? Because that would be the same as adding chocolate to your Christmas wish list – you don’t need to ask, everyone knows you want it.
The list could go on. There are dozens of other things I would love to see integrated in CSS or further developed. These are my personal favourites: some might be less useful than others, but I’ve wished for all of them at some point.
Part of the research I did while writing this article was asking some friends what they would add to their lists; other than a couple of items I already had in mine, everything else was different. I’m sure your list would be different too. So tell me, what’s on your CSS wish list? |
2010 |
Inayaili de León Persson |
inayailideleon |
2010-12-03T00:00:00+00:00 |
https://24ways.org/2010/my-css-wish-list/ |
code |
| 241 |
Jank-Free Image Loads |
There are a few fundamental problems with embedding images in pages of hypertext; perhaps chief among them is this: text is very light and loads rather fast; images are much heavier and arrive much later. Consequently, millions (billions?) of times a day, a hapless Web surfer will start reading some text on a page, and then —
Your browser doesn’t support HTML5 video. Here is
a link to the video instead.
— oops! — an image pops in above it, pushing said text down the page, and our poor reader loses their place.
By default, partially-loaded pages have the user experience of a slippery fish, or spilled jar of jumping beans. For the rest of this article, I shall call that jarring, no-good jumpiness by its name: jank. And I’ll chart a path into a jank-free future – one in which it’s easy and natural to author <img> elements that load like this:
Your browser doesn’t support HTML5 video. Here is
a link to the video instead.
Jank is a very old problem, and there is a very old solution to it: the width and height attributes on <img>. The idea is: if we stick an image’s dimensions right into the HTML, browsers can know those dimensions before the image loads, and reserve some space on the layout for it so that nothing gets bumped down the page when the image finally arrives.
width
Specifies the intended width of the image in pixels. When given together with the height, this allows user agents to reserve screen space for the image before the image data has arrived over the network.
—The HTML 3.2 Specification, published on January 14 1997
Unfortunately for us, when width and height were first spec’d and implemented, layouts were largely fixed and images were usually only intended to render at their fixed, actual dimensions. When image sizing gets fluid, width and height get weird:
See the Pen fluid width + fixed height = distortion by Eric Portis (@eeeps) on CodePen.
width and height are too rigid for the responsive world. What we need, and have needed for a very long time, is a way to specify fixed aspect ratios, to pair with our fluid widths.
I have good news, bad news, and great news.
The good news is, there are ways to do this, now, that work in every browser. Responsible sites, and responsible developers, go through the effort to do them.
The bad news is that these techniques are all terrible, cumbersome hacks. They’re difficult to remember, difficult to understand, and they can interact with other pieces of CSS in unexpected ways.
So, the great news: there are two on-the-horizon web platform features that are trying to make no-jank, fixed-aspect-ratio, fluid-width images a natural part of the web platform.
aspect-ratio in CSS
The first proposed feature? An aspect-ratio property in CSS!
This would allow us to write CSS like this:
img {
width: 100%;
}
.thumb {
aspect-ratio: 1/1;
}
.hero {
aspect-ratio: 16/9;
}
This’ll work wonders when we need to set aspect ratios for whole classes of images, which are all sized to fit within pre-defined layout slots, like the .thumb and .hero images, above.
Alas, the harder problem, in my experience, is not images with known-ahead-of-time aspect ratios. It’s images – possibly user generated images – that can have any aspect ratio. The really tricky problem is unknown-when-you’re-writing-your-CSS aspect ratios that can vary per-image. Using aspect-ratio to reserve space for images like this requires inline styles:
<img src="image.jpg" style="aspect-ratio: 5/4" />
And inline styles give me the heebie-jeebies! As a web developer of a certain age, I have a tiny man in a blue beanie permanently embedded deep within my hindbrain, who cries out in agony whenever I author a style="" attribute. And you know what? The old man has a point! By sticking super-high-specificity inline styles in my content, I’m cutting off my, (or anyone else’s) ability to change those aspect ratios, for whatever reason, later.
How might we specify aspect ratios at a lower level? How might we give browsers information about an image’s dimensions, without giving them explicit instructions about how to style it?
I’ll tell you: we could give browsers the intrinsic aspect ratio of the image in our HTML, rather than specifying an extrinsic aspect ratio!
A brief note on intrinsic and extrinsic sizing
What do I mean by “intrinsic” and “extrinsic?”
The intrinsic size of an image is, put simply, how big it’d be if you plopped it onto a page and applied no CSS to it whatsoever. An 800×600 image has an intrinsic width of 800px.
The extrinsic size of an image, then, is how large it ends up after CSS has been applied. Stick a width: 300px rule on that same 800×600 image, and its intrinsic size (accessible via the Image.naturalWidth property, in JavaScript) doesn’t change: its intrinsic size is still 800px. But this image now has an extrinsic size (accessible via Image.clientWidth) of 300px.
It surprised me to learn this year that height and width are interpreted as presentational hints and that they end up setting extrinsic dimensions (albeit ones that, unlike inline styles, have absolutely no specificity).
CSS aspect-ratio lets us avoid setting extrinsic heights and widths – and instead lets us give images (or anything else) an extrinsic aspect ratio, so that as soon as we set one dimension (possibly to a fluid width, like 100%!), the other dimension is set automatically in relation to it.
The last tool I’m going to talk about gets us out of the extrinsic sizing game all together — which, I think, is only appropriate for a feature that we’re going to be using in HTML.
intrinsicsize in HTML
The proposed intrinsicsize attribute will let you do this:
<img src="image.jpg" intrinsicsize="800x600" />
That tells the browser, “hey, this image.jpg that I’m using here – I know you haven’t loaded it yet but I’m just going to let you know right away that it’s going to have an intrinsic size of 800×600.” This gives the browser enough information to reserve space on the layout for the image, and ensures that any and all extrinsic sizing instructions, specified in our CSS, will layer cleanly on top of this, the image’s intrinsic size.
You may ask (I did!): wait, what if my <img> references multiple resources, which all have different intrinsic sizes? Well, if you’re using srcset, intrinsicsize is a bit of a misnomer – what the attribute will do then, is specify an intrinsic aspect ratio:
<img
srcset="300x200.jpg 300w,
600x400.jpg 600w,
900x600.jpg 900w,
1200x800.jpg 1200w"
sizes="75vw"
intrinsicsize="3x2" />
In the future (and behind the “Experimental Web Platform Features” flag right now, in Chrome 71+), asking this image for its .naturalWidth would not return 3 – it will return whatever 75vw is, given the current viewport width. And Image.naturalHeight will return that width, divided by the intrinsic aspect ratio: 3/2.
Can’t wait
I seem to have gotten myself into the weeds a bit. Sizing on the web is complicated!
Don’t let all of these details bury the big takeaway here: sometime soon (🤞 2019‽ 🤞), we’ll be able to toss our terrible aspect-ratio hacks into the dustbin of history, get in the habit of setting aspect-ratios in CSS and/or intrinsicsizes in HTML, and surf a less-frustrating, more-performant, less-janky web. I can’t wait! |
2018 |
Eric Portis |
ericportis |
2018-12-21T00:00:00+00:00 |
https://24ways.org/2018/jank-free-image-loads/ |
code |
| 242 |
Creating My First Chrome Extension |
Writing a Chrome Extension isn’t as scary at it seems!
Not too long ago, I used a Chrome extension called 20 Cubed. I’m far-sighted, and being a software engineer makes it difficult to maintain distance vision. So I used 20 Cubed to remind myself to look away from my screen and rest my eyes. I loved its simple interface and design. I loved it so much, I often forgot to turn it off in the middle of presentations, where it would take over my entire screen. Oops.
Unfortunately, the developer stopped updating the extension and removed it from Chrome’s extension library. I was so sad. None of the other eye rest extensions out there matched my design aesthetic, so I decided to create my own! Want to do the same?
Fortunately, Google has some respectable documentation on how to create an extension. And remember, Chrome extensions are just HTML, CSS, and JavaScript. You can add libraries and frameworks, or you can just code the “old-fashioned” way. Sky’s the limit!
Setup
But first, some things you’ll need to know about before getting started:
Callbacks
Timeouts
Chrome Dev Tools
Developing with Chrome extension methods requires a lot of callbacks. If you’ve never experienced the joy of callback hell, creating a Chrome extension will introduce you to this concept. However, things can get confusing pretty quickly. I’d highly recommend brushing up on that subject before getting started.
Hyperbole and a Half
Timeouts and Intervals are another thing you might want to brush up on. While creating this extension, I didn’t consider the fact that I’d be juggling three timers. And I probably would’ve saved time organizing those and reading up on the Chrome extension Alarms documentation beforehand. But more on that in a bit.
On the note of organization, abstraction is important! You might have any combination of the following:
The Chrome extension options page
The popup from the Chrome Menu
The windows or tabs you create
The background scripts
And that can get unwieldy. You might also edit the existing tabs or windows in the browser, which you’ll probably want as a separate script too. Note that this tutorial only covers creating your own customized window rather than editing existing windows or tabs.
Alright, now that you know all that up front, let’s get going!
Documentation
TL;DR READ THE DOCS.
A few things to get started:
Read Google’s primer on browser extensions
Have a look at their Getting started tutorial
Check out their overview on Chrome Extensions
This overview discusses the Chrome extension files, architecture, APIs, and communication between pages. Funnily enough, I only discovered the Overview page after creating my extension.
The manifest.json file gives the browser information about the extension, including general information, where to find your extension files and icons, and API permissions required. Here’s what my manifest.json looked like, for example:
https://github.com/jennz0r/eye-rest/blob/master/manifest.json
Because I’m a visual learner, I found the images that describe the extension’s architecture most helpful.
To clarify this diagram, the background.js file is the extension’s event handler. It’s constantly listening for browser events, which you’ll feed to it using the Chrome Extension API. Google says that an effective background script is only loaded when it is needed and unloaded when it goes idle.
The Popup is the little window that appears when you click on an extension’s icon in the Chrome Menu. It consists of markup and scripts, and you can tell the browser where to find it in the manifest.json under page_action: { "default_popup": FILE_NAME_HERE }.
The Options page is exactly as it says. This displays customizable options only visible to the user when they either right-click on the Chrome menu and choose “Options” under an extension. This also consists of markup and scripts, and you can tell the browser where to find it in the manifest.json under options_page: FILE_NAME_HERE.
Content scripts are any scripts that will interact with any web windows or tabs that the user has open. These scripts will also interact with any tabs or windows opened by your extension.
Debugging
A quick note: don’t forget the debugging tutorial!
Just like any other Chrome window, every piece of an extension has an inspector and dev tools. If (read: when) you run into errors (as I did), you’re likely to have several inspector windows open – one for the background script, one for the popup, one for the options, and one for the window or tab the extension is interacting with.
For example, I kept seeing the error “This request exceeds the MAX_WRITE_OPERATIONS_PER_HOUR quota.” Well, it turns out there are limitations on how often you can sync stored information.
Another error I kept seeing was “Alarm delay is less than minimum of 1 minutes. In released .crx, alarm “ALARM_NAME_HERE” will fire in approximately 1 minutes”. Well, it turns out there are minimum interval times for alarms.
Chrome Extension creation definitely benefits from debugging skills. Especially with callbacks and listeners, good old fashioned console.log can really help!
Me adding a ton of `console.log`s while trying to debug my alarms.
Eye Rest Functionality
Ok, so what is the extension I created? Again, it’s a way to rest your eyes every twenty minutes for twenty seconds. So, the basic functionality should look like the following:
If the extension is running AND
If the user has not clicked Pause in the Popup HTML AND
If the counter in the Popup HTML is down to 00:00 THEN
Open a new window with Timer HTML AND
Start a 20 sec countdown in Timer HTML AND
Reset the Popup HTML counter to 20:00
If the Timer HTML is down to 0 sec THEN
Close that window. Rinse. Repeat.
Sounds simple enough, but wow, these timers became convoluted! Of all the Chrome extensions I decided to create, I decided to make one that’s heavily dependent on time, intervals, and having those in sync with each other. In other words, I made this unnecessarily complicated and didn’t realize until I started coding.
For visual reference of my confusion, check out the GitHub repository for Eye Rest. (And yes, it’s a pun.)
API
Now let’s discuss the APIs that I used to build this extension.
Alarms
What even are alarms? I didn’t know either.
Alarms are basically Chrome’s setTimeout and setInterval. They exist because, as Google says…
DOM-based timers, such as window.setTimeout() or window.setInterval(), are not honored in non-persistent background scripts if they trigger when the event page is dormant.
For more information, check out this background migration doc.
One interesting note about alarms in Chrome extensions is that they are persistent. Garbage collection with Chrome extension alarms seems unreliable at best. I didn’t have much luck using the clearAll method to remove alarms I created on previous extension loads or installs. A workaround (read: hack) is to specify a unique alarm name every time your extension is loaded and clearing any other alarms without that unique name.
Background Scripts
For Eye Rest, I have two background scripts. One is my actual initializer and event listener, and the other is a helpers file.
I wanted to share a couple of functions between my Background and Popup scripts. Specifically, the clearAndCreateAlarm function. I wanted my background script to clear any existing alarms, create a new alarm, and add remaining time until the next alarm to local storage immediately upon extension load. To make the function available to the Background script, I added helpers.js as the first item under background > scripts in my manifest.json.
I also wanted my Popup script to do the same things when the user has unpaused the extension’s functionality. To make the function available to the Popup script, I just include the helpers script in the Popup HTML file.
Other APIs
Windows
I use the Windows API to create the Timer window when the time of my alarm is up. The window creation is initiated by my Background script.
One day, while coding late into the evening, I found it very confusing that the window.create method included url as an option. I assumed it was meant to be an external web address. A friend pondered that there must be an option to specify the window’s HTML. Until then, it hadn’t dawned on me that the url could be relative. Duh. I was tired!
I pass the timer.html as the url option, as well as type, size, position, and other visual options.
Storage
Maybe you want to pass information back and forth between the Background script and your Popup script? You can do that using Chrome or local storage. One benefit of using local storage over Chrome’s storage is avoiding quotas and write operation maximums.
I wanted to pass the time at which the latest alarm was set, the time to the next alarm, and whether or not the timer is paused between the Background and Popup scripts. Because the countdown should change every second, it’s quite complicated and requires lots of writes. That’s why I went with the user’s local storage. You can see me getting and setting those variables in my Background, Helper, and Popup scripts. Just search for date, nextAlarmTime, and isPaused.
Declarative Content
The Declarative Content API allows you to show your extension’s page action based on several type of matches, without needing to take a host permission or inject a content script. So you’ll need this to get your extension to work in the browser!
You can see me set this in my Background script. Because I want my extension’s popup to appear on every page one is browsing, I leave the page matchers empty.
There are many more APIs for Chrome apps and extensions, so make sure to surf around and see what features are available!
The Extension
Here’s what my original Popup looked like before I added styles.
And here’s what it looks like with new styles. I guess I’m going for a Nickelodeon feel.
And here’s the Timer window and Popup together!
Publishing
Publishing is a cinch. You just zip up your files, create a new or use an existing Google Developer account, upload the files, add some details, and pay a one time $5 fee. That’s all! Then your extension will be available on the Chrome extension store! Neato :D
My extension is now available for you to install.
Conclusion
I thought creating a time based Chrome Extension would be quick and easy. I was wrong. It was more complicated than I thought! But it’s definitely achievable with some time, persistence, and good ole Google searches.
Eventually, I’d like to add more interactive elements to Eye Rest. For example, hitting the YouTube API to grab a silly or cute video as a reward for looking away during the 20 sec countdown and not closing the timer window. This harkens back to one of my first web projects, Toothtimer, from 2012. Or maybe a way to change the background colors of the Timer and Popup!
Either way, with Eye Rest’s framework built out, I’m feeling fearless about future feature adds! Building this Chrome extension took some broken nails, achy shoulders, and tired eyes, but now Eye Rest can tell me to give my eyes a break every 20 minutes. |
2018 |
Jennifer Wong |
jenniferwong |
2018-12-05T00:00:00+00:00 |
https://24ways.org/2018/my-first-chrome-extension/ |
code |