| 301 |
Stretching Time |
Time is valuable. It’s a precious commodity that, if we’re not too careful, can slip effortlessly through our fingers. When we think about the resources at our disposal we’re often guilty of forgetting the most valuable resource we have to hand: time.
We are all given an allocation of time from the time bank. 86,400 seconds a day to be precise, not a second more, not a second less.
It doesn’t matter if we’re rich or we’re poor, no one can buy more time (and no one can save it). We are all, in this regard, equals. We all have the same opportunity to spend our time and use it to maximum effect. As such, we need to use our time wisely.
I believe we can ‘stretch’ time, ensuring we make the most of every second and maximising the opportunities that time affords us.
Through a combination of ‘Structured Procrastination’ and ‘Focused Finishing’ we can open our eyes to all of the opportunities in the world around us, whilst ensuring that we deliver our best work precisely when it’s required. A win win, I’m sure you’ll agree.
Structured Procrastination
I’m a terrible procrastinator. I used to think that was a curse – “Why didn’t I just get started earlier?” – over time, however, I’ve started to see procrastination as a valuable tool if it is used in a structured manner.
Don Norman refers to procrastination as ‘late binding’ (a term I’ve happily hijacked). As he argues, in Why Procrastination Is Good, late binding (delay, or procrastination) offers many benefits:
Delaying decisions until the time for action is beneficial… it provides the maximum amount of time to think, plan, and determine alternatives.
We live in a world that is constantly changing and evolving, as such the best time to execute is often ‘just in time’. By delaying decisions until the last possible moment we can arrive at solutions that address the current reality more effectively, resulting in better outcomes.
Procrastination isn’t just useful from a project management perspective, however. It can also be useful for allowing your mind the space to wander, make new discoveries and find creative connections. By embracing structured procrastination we can ‘prime the brain’.
As James Webb Young argues, in A Technique for Producing Ideas, all ideas are made of other ideas and the more we fill our minds with other stimuli, the greater the number of creative opportunities we can uncover and bring to life.
By late binding, and availing of a lack of time pressure, you allow the mind space to breathe, enabling you to uncover elements that are important to the problem you’re working on and, perhaps, discover other elements that will serve you well in future tasks.
When setting forth upon the process of writing this article I consciously set aside time to explore. I allowed myself the opportunity to read, taking in new material, safe in the knowledge that what I discovered – if not useful for this article – would serve me well in the future.
Ron Burgundy summarises this neatly:
Procrastinator? No. I just wait until the last second to do my work because I will be older, therefore wiser.
An ‘older, therefore wiser’ mind is a good thing. We’re incredibly fortunate to live in a world where we have a wealth of information at our fingertips. Don’t waste the opportunity to learn, rather embrace that opportunity. Make the most of every second to fill your mind with new material, the rewards will be ample.
Deadlines are deadlines, however, and deadlines offer us the opportunity to focus our minds, bringing together the pieces of the puzzle we found during our structured procrastination.
Like everyone I’ll hear a tiny, but insistent voice in my head that starts to rise when the deadline is approaching. The older you get, the closer to the deadline that voice starts to chirp up.
At this point we need to focus.
Focused Finishing
We live in an age of constant distraction. Smartphones are both a blessing and a curse, they keep us connected, but if we’re not careful the constant connection they provide can interrupt our flow.
When a deadline is accelerating towards us it’s important to set aside the distractions and carve out a space where we can work in a clear and focused manner.
When it’s time to finish, it’s important to avoid context switching and focus. All those micro-interactions throughout the day – triaging your emails, checking social media and browsing the web – can get in the way of you hitting your deadline. At this point, they’re distractions.
Chunking tasks and managing when they’re scheduled can improve your productivity by a surprising order of magnitude. At this point it’s important to remove distractions which result in ‘attention residue’, where your mind is unable to focus on the current task, due to the mental residue of other, unrelated tasks.
By focusing on a single task in a focused manner, it’s possible to minimise the negative impact of attention residue, allowing you to maximise your performance on the task at hand.
Cal Newport explores this in his excellent book, Deep Work, which I would highly recommend reading. As he puts it:
Efforts to deepen your focus will struggle if you don’t simultaneously wean your mind from a dependence on distraction.
To help you focus on finishing it’s helpful to set up a work-focused environment that is purposefully free from distractions. There’s a time and a place for structured procrastination, but – equally – there’s a time and a place for focused finishing.
The French term ‘mise en place’ is drawn from the world of fine cuisine – I discovered it when I was procrastinating – and it’s applicable in this context. The term translates as ‘putting in place’ or ‘everything in its place’ and it refers to the process of getting the workplace ready before cooking.
Just like a professional chef organises their utensils and arranges their ingredients, so too can you.
Thanks to the magic of multiple users on computers, it’s possible to create a separate user on your computer – without access to email and other social tools – so that you can switch to that account when you need to focus and hit the deadline.
Another, less technical way of achieving the same result – depending, of course, upon your line of work – is to close your computer and find some non-digital, unconnected space to work in.
The goal is to carve out time to focus so you can finish. As Newport states:
If you don’t produce, you won’t thrive – no matter how skilled or talented you are.
Procrastination is fine, but only if it’s accompanied by finishing. Create the space to finish and you’ll enjoy the best of both worlds.
In closing…
There is a time and a place for everything: there is a time to procrastinate, and a time to focus. To truly reap the rewards of time, the mind needs both.
By combining the processes of ‘Structured Procrastination’ and ‘Focused Finishing’ we can make the most of our 86,400 seconds a day, ensuring we are constantly primed to make new discoveries, but just as importantly, ensuring we hit the all-important deadlines.
Make the most of your time, you only get so much. Use every second productively and you’ll be thankful that you did. Don’t waste your time, once it’s gone, it’s gone… and you can never get it back. |
2016 |
Christopher Murphy |
christophermurphy |
2016-12-21T00:00:00+00:00 |
https://24ways.org/2016/stretching-time/ |
process |
| 302 |
Flexible Project Management in Inflexible Environments |
Handling unforeseen circumstances is an inevitable part of any project. It’s also often the most uncomfortable, and there is no amount of skill or planning that will fully eradicate the need to adapt to change. The ability to be flexible, responsive, and unafraid of facing not only problems, but also potentially positive scope changes and new ideas, isn’t an easy one to master. I am by no means saying that I have, but what I have learned is that there is often the temptation to shut out anything that might derail your plan, even sometimes at the cost of the quality you’re committed to.
The reality is that as someone leading a project you know there will be challenges, but, in general, it’s a hassle to try keep the landscape open. Problems are bridges we should cross when we come to them, but intentional changes to the plan, and adapting for the sake of improving your first idea, is harder. There are tight schedules, resource is planned miles ahead, and you’re already juggling twenty other things. If you’re passionate about the quality of work you deliver and are working somewhere that considers itself expert within the field of digital, then having an attitude of flexibility is extremely important. It’s important when you’re overcoming a challenge or problem, but it’s also important for allowing ideas to evolve and be refined as much as they can be throughout the course of a project.
Where theory falls short
The premise of any Agile methodology, Scrum for example, is based around being able to work efficiently, react quickly and deliver relevant chunks of a product in manageable increments. It’s often hailed as king of flexible management and it can work really well, especially for in-house software products developed over a long or even an indefinite period of time. It holds off defining scope too far ahead and lets teams focus on smaller amounts of work, and allows them to regularly reprioritise. Unfortunately though, not all environments lend themselves as easily to a fully Agile setup. Even the ones that do may be restrained from putting it fully into practice for an array of other internal reasons.
Delivering digital services to clients—within an agency setting or as a freelancer—often demands a more rigid structure. You need clear sign-off points, there’s a lot less flexibility in defining features, or working within budgets and timeframes. To start with, for a project to warrant a fully Agile team working on it, and especially for agencies, you need clients big enough and rich enough to justify the resource. You also need a lot of client trust to propose defining features and scope as you go. Although this is achievable—and there are agencies that operate an agile setup—it takes a long journey to reach that scale in the full sense of the word. Building a reputation that commands unconditional trust and reaching the point where your projects are consistently of a certain size often requires backing by long journey of success and excellence.
So there is a lot of room left for understanding how we can best strive to still deliver excellent projects within more constrained structures. We know that rigid waterfall planning, more often than not, falls over as soon as a project gets anything past a basic brochure site. There are many critiques of the system, but one of the main ones tends to be that nobody considers each other’s work properly, which can result in very expensive and inefficient development.
Equally, for reasons we’ve already touched upon, running fully agile teams often isn’t the right answer. So many companies, individuals, and organisations look for a middle-ground that balances being flexible and adaptive, but also provides enough upfront commitment to agree budgets, get client/stakeholder sign off, and effectively coordinate internal resource across multiple parallel projects.
Although I don’t have a perfect formula—and can very much assert there is no one perfect way of managing a project because every project is different to the next—I’ve identified a few different ways you can approach flexibility that have really helped me in running projects more smoothly within more realistic constraints.
Planned Flexibility
Drawing on some of the traditional methodologies such as PRINCE2, a good starting point for aspiring to be flexible is by planning for it from the start.
Planning flexibility comes in a few forms. For one, you can regularly identify and log potential risks as a generally good, on-going habit over the course of the project. This essentially just involves scanning the horizon for potential blips on a regular basis (for example weekly) by consulting with your team and documenting it somewhere. It means you have a checkpoint when you sit down and make sure you’re minimising what will or may catch you by surprise. A good time to do this is in a weekly catch up meeting. It’s not going to fix all your problems, but it will make sure you have a head start on the ones you can see coming.
On the subject of team meetings, setting up recurring project events, including a weekly call, a weekly team meeting and (depending on the size of the project) I like to try also do a stand-up as often as possible. Keeping everyone involved and bought in to a project is going to help you infinitely when you need to spot a problem or manage changes to the plan. It will be the difference between your designer spotting an issue and making a mental note to ‘tell you later’, and them actually coming over to tell you directly and immediately. Despite the overhead of meetings, and looping people into stages that they aren’t directly responsible for, the business benefits are chances for success are drastically increased. Planning in, and being aware of how important your team is, will help you be flexible.
Building contingency (formally know as slack) into your project plan from the word go is another well-known and essential way of planning to be flexible. Your project plan will change a lot over the course of a project, but there are still the days that you estimate a job will take, and the days you should actually plan in. Most sensible management teams understand that budgets need to be agreed with this slack in mind or you will not be able to deliver a quality service. I believe that commercial awareness is one of the most valuable skills a project manager can have, but penny pinching will ruin client and team relationships, destroy buy-in and creativity, and often end you up with a much more expensive, hacky, and resented product.
It’s not a justification to let budgets spiral out of control, but a way of thinking about the bigger picture and wider plan of the company itself. It’s unlikely you want high staff turnover because everyone fell out while you were screaming money at them and they didn’t feel like they could do a good job. It’s also unlikely that you will be able to deliver quality products, which will win you a strong reputation and subsequently bigger and better projects. Evaluating risk factors and building in the right amount of slack from the start will give you more wriggle room when you need to adapt and react. On the flip side, also keeping an overview of the wider workload (that you’re not necessarily responsible for), and knowing who to talk if resource is becoming free or needs filling, is another handy way of being able to react quickly and ensuring your management system is respected. You want pockets of backup time planned in, but you also want everyone being as productive as they can most of the time. Never run at 100% capacity: as soon as something does need to change, you’re left with nowhere to move.
Transparency
Having a client or stakeholder that trusts you is a really powerful aid in any regard, but especially so when you need to communicate an issue or new suggestion. Positioning yourself and your team as experts and taking the time to delve into the wider picture—and the goals surrounding your client’s reasons to commission the project in the first place—will make you more valuable to them. Clients and stakeholders will always be different, and sometimes you will get people who are just plain difficult, but more often than not people will listen if you’re willing to talk and explain things.
As I’m sure all of us have realised at one point or another, a lot of people think they know what they want, and it’s usually the wrong thing. Managing key stakeholders in your project is arguably your biggest challenge, if they are on the your side and feel like the team is genuinely working to give them something of quality and value, then they will make your job easier. It’s often down to you to educate them, and to help them recognise and understand the work involved and you and your team’s reasoning behind your decisions.
Being overly submissive or overly secretive will foster a dynamic in which they feel expected to steer the project. In this situation they may not respect the team’s suggestions or may come up with some unreasonable and counterproductive ideas that are likely to hinder progress and lower morale. Getting the stakeholder on board and making them feel a part of the wider picture will make things easier. Pushing back and challenging ideas or working hard to justify something they don’t quite understand will often work in your favour and protects your team. On quite a basic level it also shows you care and are invested; on another, it shows you feel confident in your expertise within your field and that is ultimately the reason they hired you.
Taking the time to think about and be aware of this relationship, will make it easier to be flexible and handle new ideas or suggestions that pop up as the project goes along. Change doesn’t need to be ‘scope creep’ if it’s raised in a practical, value-orientated, and level headed discussion. There is usually a way forward for new ideas, as long as they’re valuable and support the wider goals. Maybe the deadline gets pushed back, maybe you get more budget, maybe the client is happy to forgo something else. As long as there’s value and reason, it shows integrity to the project and respect for its success. You can’t expect for this to go smoothly without having invested in the client relationship, so it’s a large point in paving the way to handling change well.
Reactive Flexibility
Finally, if you’ve been doing this for a while, you’ll know by now that you can’t anticipate everything. Sometimes you will have to react and change the plan under circumstances that aren’t easy. When an unexpected problem first rears its head—a client’s casual afterthought that’s threatening the scope of the project, an internal resource conflict, a junior member of staff that’s not grasping the ropes quite as quickly as you’d hoped—you have to react quickly.
In his book, ‘Pitch Anything’, Oren Klaff talks about people’s first reactions being processed by their ‘crocodile brain’ before they’ve had a chance to refine and digest the information more intelligibly. As project managers, product owners, or scrum masters, it’s natural for our immediate reactions to an unexpected problem to cause a pang of stress. But after that initial jolt you need to turn to practical solutions and start racking your brain for different ways forward. It’s here you need to remember to not let your imagination get the better of you, especially if you’ve been putting in the legwork with your team and your client. There is always a way forward and moments like this can be a good opportunity to develop your negotiation and diplomacy skills. Don’t let your immediate reaction be shutting the problem down; instead, take a second to think about it before you decide on the best direction. In a stressful situation, your first idea probably won’t be your best one.
From an internal point of view, it’s very important that whatever went wrong doesn’t turn into a finger pointing exercise and you don’t lose your cool. Getting caught up in a blame game or a witch hunt is never productive. Relationship cultivating can sometimes be the pillar that gets you through a stressful blip. Biggest tip for staying flexible when you’re reacting to a problem—apart form obviously thinking of ways forward—is to communicate. Don’t go quiet until you feel like you have a plan, you’ll often need to put everyone else at ease before you can move things forward. Problem solving is part of the job and will need to happen in even the most flexible of product delivery systems.
In conclusion, being flexible is never simple but there are things you can do to make your life easier. Owning a position of expertise, putting together a team that’s involved in each other’s work and cultivating a client/stakeholder relationship that’s as transparent and respectful as possible will get you a long way. In times of crisis, believe in your skills and be open to adapting over getting frustrated. |
2016 |
Gillian Sibthorpe |
gilliansibthorpe |
2016-12-04T00:00:00+00:00 |
https://24ways.org/2016/flexible-project-management/ |
process |
| 303 |
We Need to Talk About Technical Debt |
In my work with clients, a lot of time is spent assessing old, legacy, sprawling systems and identifying good code, bad code, and technical debt.
One thing that constantly strikes me is the frequency with which bad code and technical debt are conflated, so let me start by saying this:
Not all technical debt is bad code, and not all bad code is technical debt.
Sometimes your bad code is just that: bad code. Calling it technical debt often feels like a more forgiving and friendly way of referring to what may have just been a poor implementation or a substandard piece of work.
It is an oft-misunderstood phrase, and when mistaken for meaning ‘anything legacy or old hacky or nasty or bad’, technical debt is swept under the carpet along with all of the other parts of the codebase we’d rather not talk about, and therein lies the problem.
We need to talk about technical debt.
What We Talk About When We Talk About Technical Debt
The thing that separates technical debt from the rest of the hacky code in our project is the fact that technical debt, by definition, is something that we knowingly and strategically entered into. Debt doesn’t happen by accident: debt happens when we choose to gain something otherwise-unattainable immediately in return for paying it back (with interest) later on.
An Example
You’re a front-end developer working on a SaaS product, and your sales team is courting a large customer – a customer so large that you can’t really afford to lose them. The customer tells you that as long as you can allow them to theme your SaaS application according to their branding, they are willing to sign on the dotted line… the problem being that your CSS architecture was never designed to incorporate theming at all, and there isn’t currently a nice, clean way to incorporate a theme into the codebase.
You and the business make the decision that you will hack a theme into the product in two days. It’s going to be messy, it’s going to be ugly, but you can’t afford to lose a huge customer just because your CSS isn’t quite right, right now. This is technical debt.
You deliver the theme, the customer signs up, and everyone is happy. Except you (and the business, because you are one and the same) have a decision to make:
Do we go back and build theming into the CSS architecture as a first-class citizen, porting the hacked theme back into a codified and formal framework?
Do we carry on as we are? Things are working okay, and the customer paid up, so is there any reason to invest time and effort into things after we (and the customer) got what we wanted?
Option 1 is choosing to pay off your debts; Option 2 is ignoring your repayments.
With Option 1, you’re acknowledging that you did what you could given the constraints, but, free of constraints, you’d have done something different. Now, you are choosing to implement that something different.
With Option 2, however, you are avoiding your responsibility to repay your debt, and you are letting interest accrue. The problem here is that…
your SaaS product now offers theming to one of your customers;
another potential customer might also demand the ability to theme their instance of your product;
you can’t refuse them that request, nor can you quickly fulfil it;
you hack in another theme, thus adding to the balance of your existing debt;
and so on (plus interest) for every subsequent theme you need to implement.
Here you have increased entropy whilst making little to no attempt to address what you already knew to be problems.
Your second, third, fourth, fifth request for theming will be hacked on top of your hack, further accumulating debt whilst offering nothing by way of a repayment. After a long enough period, the code involved will get so unwieldy, so hard to work with, that you are forced to tear it all down and start again, and the most painful part of this is that you’re actually paying off even more than your debt repayments would have been in the first place. Two days of hacking plus, say, five days of subsequent refactoring, would still have been substantially less than the weeks you will now have to spend rewriting your CSS to fix and incorporate the themes properly. You’ve made a loss; your strategic debt ultimately became a loss-making exercise.
The important thing to note here is that you didn’t necessarily write bad code. You knew there were two options: the quick way and the correct way. The decision to take the quick route was a definite choice, because you knew there was a better way. Implementing the better way is your repayment.
Good Debt and Bad Debt
Technical debt is acceptable as long as you have intentions to settle; it can be a valuable solution to a business problem, provided the right approach is taken afterwards. That doesn’t, however, mean that all debt is born equal. Just as in real life, there is good debt and there is bad debt.
Good debt might be…
a mortgage;
a student loan, or;
a business loan.
These are types of debt that will secure you the means of repaying them. These are well considered debts whose very reason for being will allow you to make the money to pay them off—they have real, tangible benefit.
A business loan to secure some equipment and premises will allow you to start an enterprise whose revenue will allow you to pay that debt back; a student loan will allow you to secure the kind of job that has the ability to pay a student loan back.
These kinds of debt involve a considered and well-balanced decision to acquire something in the short term in the knowledge that you will have the means, in the long term, to pay it back.
Conversely, bad debt might be…
borrowing $1,000 from a loan shark so you can go to Vegas, or;
taking out a payday loan in order to buy a new television.
Both of these kinds of debt will leave you paying for things that didn’t provide you a way of earning your own capital. That is to say, the loans taken did not secure anything that would help pay off said loans. These are bad debts that will usually provide a net loss. You really are only gaining the short term in exchange for a long term financial responsibility: i.e., was it worth it?
A good litmus test for debt is to compare the gains of its immediate benefit with the cost of its long term commitment.
The earlier example of theming a site is a good debt, provided we are keeping up our repayments (all debt is bad debt if you don’t). A calculated decision to do something ‘wrong’ in the short term with the promise of better payoffs later on.
Bad Technical Debt
The majority of my work is with front-end development teams—CSS is what I do. To that end, the most succinct example of technical debt for that audience is simply:
!important
All front-end developers know the horrors and dangers associated with using !important, yet we continue to use it. Why?
It’s not necessarily because we’re bad developers, but because we see a shortcut. !important is usually implemented as a quick way out of a sticky specificity situation. We could spend the rest of the day refactoring our CSS to fix the issue at its source, or we can spend mere seconds typing the word !important and patch over the symptoms.
This is us making an explicit decision to do something less than ideal now in exchange for immediate benefit. After all, refactoring our CSS will take a lot more time, and will still only leave us with the same outcome that the vastly quicker !important solution will, so it seems to make better business sense.
However, this is a bad debt. !important takes seconds to implement but weeks to refactor. The cost of refactoring this back out later will be an order of magnitude higher than it would be to have done things properly the first time. The first !important usually sets a precedent, and subsequent developers are likely to have to use it themselves in order to get around the one that you left.
So many CSS projects deteriorate because of this one simple word, and rewrites become more and more imminent. That makes it possibly the most costly 10 bytes a CSS developer could ever write.
Bad Code
Now we’ve got a good idea of what constitutes technical debt, let’s take a look at what constitutes bad code. Something I hear time and time again in my client work goes a little like this:
We’ve amassed a lot of technical debt and we’d like to get a strategy in place
to begin dealing with it.
Whilst I genuinely admire their willingness to identify and desire to fix problems in their code, sometimes they’re not looking at technical debt at
all—sometimes they’re just looking at bad code, plain and simple.
Where technical debt is knowing that there’s a better way, but the quicker way makes more sense right now, bad code is not caring if there’s a better way at all.
Again, looking at a CSS-specific world, a lot of bad code is contributed by non-front-end developers with little training, appreciation, or even respect for the front-end landscape. Writing code with reckless abandon should not be described as technical debt, because to do so would imply that…
the developers knew they were implementing a sub-par solution, but…
the developers also knew that a better solution was out there, which…
implies that it can be tidied up relatively simply.
Developers writing bad code is a larger and more cultural problem that requires a lot more effort to fix. Hopefully—and usually—bad code is in the minority, but it helps to be objective in identifying and solving it. Bad code usually doesn’t happen for a good enough reason, and is therefore much harder to justify.
Technical debt often represents ability in judgement, whereas bad code often represents a gap in skills.
Takeaway
Take time to familiarise yourself with the true concepts underlying technical debt and why it exists. Understand that technical debt can be good or bad. Admit that sometimes code is just of poor quality.
Understanding these points will allow you to make better calls around what you might need to refactor and when, and what skills gaps you might have in your team.
Sometimes it’s okay to cut corners if there is a tangible gain to be had in the immediate term.
Technical debt is okay provided it is a sensible debt and you have intentions to pay it off.
Technical debt is not necessarily synonymous with bad code, and bad code isn’t necessarily technical debt. Technical debt is code that was implemented given limited knowledge or resource, with the understanding that you would need to repay something in future.
Technical debt is not inherently bad—failure to make repayments is. Periodically, it is justifiable—encouraged, even—to enter a debt in order to fulfil a more pressing matter. However, it is imperative that we begin making repayments as soon as we are capable, be that based on newly available time or knowledge.
Bad code is worse than technical debt as it represents a lack of knowledge or quality control within a team. It needs a much more fundamental fix. |
2016 |
Harry Roberts |
harryroberts |
2016-12-05T00:00:00+00:00 |
https://24ways.org/2016/we-need-to-talk-about-technical-debt/ |
code |
| 304 |
Five Lessons From My First 18 Months as a Dev |
I recently moved from Sydney to London to start a dream job with Twitter as a software engineer. A software engineer! Who would have thought.
Having started my career as a journalist, the title ‘engineer’ is very strange to me. The notion of writing in first person is also very strange. Journalists are taught to be objective, invisible, to keep yourself out of the story. And here I am writing about myself on a public platform. Cringe.
Since I started learning to code I’ve often felt compelled to write about my experience. I want to share my excitement and struggles with the world! But as a junior I’ve been held back by thoughts like ‘whatever you have to say won’t be technical enough’, ‘any time spent writing a blog would be better spent writing code’, ‘blogging is narcissistic’, etc.
Well, I’ve been told that your thirties are the years where you stop caring so much about what other people think. And I’m almost 30. So here goes!
These are five key lessons from my first year and a half in tech:
Deployments should delight, not dread
Lesson #1: Making your deployment process as simple as possible is worth the investment.
In my first dev job, I dreaded deployments. We would deploy every Sunday night at 8pm. Preparation would begin the Friday before. A nominated deployment manager would spend half a day tagging master, generating scripts, writing documentation and raising JIRAs. The only fun part was choosing a train gif to post in HipChat: ‘All aboard! The deployment train leaves in 3, 2, 1…”
When Sunday night came around, at least one person from every squad would need to be online to conduct smoke tests. Most times, the deployments would succeed. Other times they would fail. Regardless, deployments ate into people’s weekend time — and they were intense. Devs would rush to have their code approved before the Friday cutoff. Deployment managers who were new to the process would fear making a mistake.
The team knew deployments were a problem. They were constantly striving to improve them. And what I’ve learnt from Twitter is that when they do, their lives will be bliss.
TweetDeck’s deployment process fills me with joy and delight. It’s quick, easy and stress free. In fact, it’s so easy I deployed code on my first day in the job! Anyone can deploy, at any time of day, with a single command. Rollbacks are just as simple. There’s no rush to make the deployment train. No manual preparation. No fuss. Value — whether in the form of big new features, simple UI improvements or even production bug fixes — can be shipped in an instant. The team assures me the process wasn’t always like this. They invested lots of time in making their deployments better. And it’s clearly paid off.
Code reviews need love, time and acceptance
Lesson #2: Code reviews are a three-way gift. Every time I review someone else’s code, I help them, the team and myself.
Code reviews were another pain point in my previous job. And to be honest, I was part of the problem. I would raise code reviews that were far too big. They would take days, sometimes weeks, to get merged. One of my reviews had 96 comments! I would rarely review other people’s code because I felt too junior, like my review didn’t carry any weight.
The review process itself was also tiring, and was often raised in retrospectives as being slow. In order for code to be merged it needed to have ticks of approval from two developers and a third tick from a peer tester. It was the responsibility of the author to assign the reviewers and tester. It was felt that if it was left to team members to assign themselves to reviews, the “someone else will do it” mentality would kick in, and nothing would get done.
At TweetDeck, no-one is specifically assigned to reviews. Instead, when a review is raised, the entire team is notified. Without fail, someone will jump on it. Reviews are seen as blocking. They’re seen to be equally, if not more important, than your own work. I haven’t seen a review sit for longer than a few hours without comments.
We also don’t work on branches. We push single commits for review, which are then merged to master. This forces the team to work in small, incremental changes. If a review is too big, or if it’s going to take up more than an hour of someone’s time, it will be sent back.
What I’ve learnt so far at Twitter is that code reviews must be small. They must take priority. And they must be a team effort. Being a new starter is no “get out of jail free card”. In fact, it’s even more of a reason to be reviewing code. Reviews are a great way to learn, get across the product and see different programming styles. If you’re like me, and find code reviews daunting, ask to pair with a senior until you feel more confident. I recently paired with my mentor at Twitter and found it really helpful.
Get friendly with feature flagging
Lesson #3: Feature flagging gives you complete control over how you build and release a project.
Say you’re implementing a new feature. It’s going to take a few weeks to complete. You’ll complete the feature in small, incremental changes. At what point do these changes get merged to master? At what point do they get deployed? Do you start at the back end and finish with the UI, so the user won’t see the changes until they’re ready? With feature flagging — it doesn’t matter. In fact, with feature flagging, by the time you are ready to release your feature, it’s already deployed, sitting happily in master with the rest of your codebase.
A feature flag is a boolean value that gets wrapped around the code relating to the thing you’re working on. The code will only be executed if the value is true.
if (TD.decider.get(‘new_feature’)) {
//code for new feature goes here
}
In my first dev job, I deployed a navigation link to the feature I’d been working on, making it visible in the product, even though the feature wasn’t ready. “Why didn’t you use a feature flag?” a senior dev asked me. An honest response would have been: “Because they’re confusing to implement and I don’t understand the benefits of using them.” The fix had to wait until the next deployment.
The best thing about feature flagging at TweetDeck is that there is no need to deploy to turn on or off a feature. We set the status of the feature via an interface called Deckcider, and the code makes regular API requests to get the status.
At TweetDeck we are also able to roll our features out progressively. The first rollout might be to a staging environment. Then to employees only. Then to 10 per cent of users, 20 per cent, 30 per cent, and so on. A gradual rollout allows you to monitor for bugs and unexpected behaviour, before releasing the feature to the entire user base.
Sometimes a piece of work requires changes to existing business logic. So the code might look more like this:
if (TD.decider.get(‘change_to_existing_feature’)) {
//new logic goes here
} else {
//old logic goes here
}
This seems messy, right? Riddling your code with if else statements to determine which path of logic should be executed, or which version of the UI should be displayed. But at Twitter, this is embraced. You can always clean up the code once a feature is turned on. This isn’t essential, though. At least not in the early days. When a cheeky bug is discovered, having the flag in place allows the feature to be very quickly turned off again.
Let data and experimentation drive development
Lesson #4: Use data to determine the direction of your product and measure its success.
The first company I worked for placed a huge amount of emphasis on data-driven decision making. If we had an idea, or if we wanted to make a change, we were encouraged to “bring data” to show why it was necessary. “Without data, you’re just another person with an opinion,” the chief data scientist would say. This attitude helped to ensure we were building the right things for our customers. Instead of just plucking a new feature out of thin air, it was chosen based on data that reflected its need.
But how do you design that feature? How do you know that the design you choose will have the desired impact? That’s where experiments come into play.
At TweetDeck we make UI changes that we hope will delight our users. But the assumptions we make about our users are often wrong. Our front-end team recently sat in a room and tried to guess which UIs from A/B tests had produced better results. Half the room guessed incorrectly every time.
We can’t assume a change we want to make will have the impact we expect. So we run an experiment. Here’s how it works. Users are placed into buckets. One bucket of users will have access to the new feature, the other won’t. We hypothesise that the bucket exposed to the new feature will have better results. The beauty of running an experiment is that we’ll know for sure. Instead of blindly releasing the feature to all users without knowing its impact, once the experiment has run its course, we’ll have the data to make decisions accordingly.
Hire the developer, not the degree
Lesson #5: Testing candidates on real world problems will allow applicants from all backgrounds to shine.
Surely, a company like Twitter would give their applicants insanely difficult code tests, and the toughest technical questions, that only the cleverest CS graduates could pass, I told myself when applying for the job. Lucky for me, this wasn’t the case. The process was insanely difficult—don’t get me wrong—but the team at TweetDeck gave me real world problems to solve.
The first code test involved bug fixes, performance and testing. The second involved DOM traversal and manipulation. Instead of being put on the spot in a room with a whiteboard and pen I was given a task, access to the internet, and time to work on it. Similarly, in my technical interviews, I was asked to pair program on real world problems that I was likely to face on the job.
In one of my phone screenings I was told Twitter wanted to increase diversity in its teams. Not just gender diversity, but also diversity of experience and background. Six months later, with a bunch of new hires, team lead Tom Ashworth says TweetDeck has the most diverse team it’s ever had. “We designed an interview process that gave us a way to simulate the actual job,” he said. “It’s not about testing whether you learnt an algorithm in school.”
Is this lowering the bar? No. The bar is whether a candidate has the ability to solve problems they are likely to face on the job. I recently spoke to a longstanding Atlassian engineer who said they hadn’t seen an algorithm in their seven years at the company.
These days, only about 50 per cent of developers have computer science degrees. The majority of developers are self taught, learn on the job or via online courses. If you want to increase diversity in your engineering team, ensure your interview process isn’t excluding these people. |
2016 |
Amy Simmons |
amysimmons |
2016-12-20T00:00:00+00:00 |
https://24ways.org/2016/my-first-18-months-as-a-dev/ |
process |
| 305 |
CSS Writing Modes |
Since you may not have a lot of time, I’m going to start at the end, with the dessert.
You can use a little-known, yet important and powerful CSS property to make text run vertically. Like this.
Or instead of running text vertically, you can layout a set of icons or interface buttons in this way. Or, of course, with anything on your page.
The CSS I’ve applied makes the browser rethink the orientation of the world, and flow the layout of this element at a 90° angle to “normal”. Check out the live demo, highlight the headline, and see how the cursor is now sideways.
See the Pen Writing Mode Demo — Headline by Jen Simmons (@jensimmons) on CodePen.
The code for accomplishing this is pretty simple.
h1 {
writing-mode: vertical-rl;
}
That’s all it takes to switch the writing mode from the web’s default horizontal top-to-bottom mode to a vertical right-to-left mode. If you apply such code to the html element, the entire page is switched, affecting the scroll direction, too.
In my example above, I’m telling the browser that only the h1 will be in this vertical-rl mode, while the rest of my page stays in the default of horizontal-tb.
So now the dessert course is over. Let me serve up this whole meal, and explain the the CSS Writing Mode Specification.
Why learn about writing modes?
There are three reasons I’m teaching writing modes to everyone—including western audiences—and explaining the whole system, instead of quickly showing you a simple trick.
We live in a big, diverse world, and learning about other languages is fascinating. Many of you lay out pages in languages like Chinese, Japanese and Korean. Or you might be inspired to in the future.
Using writing-mode to turn bits sideways is cool. This CSS can be used in all kinds of creative ways, even if you are working only in English.
Most importantly, I’ve found understanding Writing Modes incredibly helpful when understanding Flexbox and CSS Grid. Before I learned Writing Mode, I felt like there was still a big hole in my knowledge, something I just didn’t get about why Grid and Flexbox work the way they do. Once I wrapped my head around Writing Modes, Grid and Flexbox got a lot easier. Suddenly the Alignment properties, align-* and justify-*, made sense.
Whether you know about it or not, the writing mode is the first building block of every layout we create. You can do what we’ve been doing for 25 years – and leave your page set to the default left-to-right direction, horizontal top-to-bottom writing mode. Or you can enter a world of new possibilities where content flows in other directions.
CSS properties
I’m going to focus on the CSS writing-mode property in this article. It has five possible options:
writing-mode: horizontal-tb;
writing-mode: vertical-rl;
writing-mode: vertical-lr;
writing-mode: sideways-rl;
writing-mode: sideways-lr;
The CSS Writing Modes Specification is designed to support a wide range of written languages in all our human and linguistic complexity. Which—spoiler alert—is pretty insanely complex. The global evolution of written languages has been anything but simple.
So I’ve got to start with explaining some basic concepts of web page layout and writing systems. Then I can show you what these CSS properties do.
Inline Direction, Block Direction, and Character Direction
In the world of the web, there’s a concept of ‘block’ and ‘inline’ layout. If you’ve ever written display: block or display: inline, you’ve leaned on these concepts.
In the default writing mode, blocks stack vertically starting at the top of the page and working their way down. Think of how a bunch of block-levels elements stack—like a bunch of a paragraphs—that’s the block direction.
Inline is how each line of text flows. The default on the web is from left to right, in horizontal lines. Imagine this text that you are reading right now, being typed out one character at a time on a typewriter. That’s the inline direction.
The character direction is which way the characters point. If you type a capital “A” for instance, on which side is the top of the letter? Different languages can point in different directions. Most languages have their characters pointing towards the top of the page, but not all.
Put all three together, and you start to see how they work as a system.
The default settings for the web work like this.
Now that we know what block, inline, and character directions mean, let’s see how they are used in different writing systems from around the world.
The four writing systems of CSS Writing Modes
The CSS Writing Modes Specification handles all the use cases for four major writing systems; Latin, Arabic, Han and Mongolian.
Latin-based systems
One writing system dominates the world more than any other, reportedly covering about 70% of the world’s population.
The text is horizontal, running from left to right, or LTR. The block direction runs from top to bottom.
It’s called the Latin-based system because it includes all languages that use the Latin alphabet, including English, Spanish, German, French, and many others. But there are many non-Latin-alphabet languages that also use this system, including Greek, Cyrillic (Russian, Ukrainian, Bulgarian, Serbian, etc.), and Brahmic scripts (Devanagari, Thai, Tibetan), and many more.
You don’t need to do anything in your CSS to trigger this mode. This is the default.
Best practices, however, dictate that you declare in your opening <html> element which language and which direction (LTR or RTL) you are using. This website, for instance, uses <html lang='en-gb' dir='ltr'> to let the browser know this content is published in Great Britian’s version of English, in a left to right direction.
Arabic-based systems
Arabic, Hebrew and a few other languages run the inline direction from right to left. This is commonly known as RTL.
Note that the inline direction still runs horizontally. The block direction runs from top to bottom. And the characters are upright.
It’s not just the flow of text that runs from right to left, but everything about the layout of the website. The upper right-hand corner is the starting position. Important things are on the right. The eyes travel from right to left. So, typically RTL websites use layouts that are just like LTR websites, only flipped.
On websites that support both LTR and RTL, like the United Nations’ site at un.org, the two layouts are mirror images of each other.
For many web developers, our experiences with internationalization have focused solely on supporting Arabic and Hebrew script.
CSS layout hacks for internationalization & RTL
To prepare an LTR project to support RTL, developers have had to create all sorts of hacks. For example, the Drupal community started a convention of marking every margin-left and -right, every padding-left and -right, every float: left and float: right with the comment /* LTR */. Then later developers could search for each instance of that exact comment, and create stylesheets to override each left with right, and vice versa. It’s a tedious and error prone way to work. CSS itself needed a better way to let web developers write their layout code once, and easily switch language directions with a single command.
Our new CSS layout system does exactly that. Flexbox, Grid and Alignment use start and end instead of left and right. This lets us define everything in relationship to the writing system, and switch directions easily. By writing justify-content: flex-start, justify-items: end, and eventually margin-inline-start: 1rem we have code that doesn’t need to be changed.
This is a much better way to work. I know it can be confusing to think through start and end as replacements for left and right. But it’s better for any multiligual project, and it’s better for the web as a whole.
Sadly, I’ve seen CSS preprocessor tools that claim to “fix” the new CSS layout system by getting rid of start and end and bringing back left and right. They want you to use their tool, write justify-content: left, and feel self-righteous. It seems some folks think the new way of working is broken and should be discarded. It was created, however, to fulfill real needs. And to reflect a global internet. As Bruce Lawson says, WWW stands for the World Wide Web, not the Wealthy Western Web. Please don’t try to convince the industry that there’s something wrong with no longer being biased towards western culture. Instead, spread the word about why this new system is here.
Spend a bit of time drilling the concept of inline and block into your head, and getting used to start and end. It will be second nature soon enough.
I’ve also seen CSS preprocessors that let us use this new way of thinking today, even as all the parts aren’t fully supported by browsers yet. Some tools let you write text-align: start instead of text-align: left, and let the preprocessor handle things for you. That is terrific, in my opinion. A great use of the power of a preprocessor to help us switch over now.
But let’s get back to RTL.
How to declare your direction
You don’t want to use CSS to tell the browser to switch from an LTR language to RTL. You want to do this in your HTML. That way the browser has the information it needs to display the document even if the CSS doesn’t load.
This is accomplished mainly on the html element. You should also declare your main language. As I mentioned above, the 24 ways website is using <html lang='en-gb' dir='ltr'> to declare the LTR direction and the use of British English. The UN Arabic website uses <html lang='ar' dir='rtl'>to declare the site as an Arabic site, using a RTL layout.
Things get more complicated when you’ve got a page with a mix of languages. But I’m not going to get into all of that, since this article is focused on CSS and layouts, not explaining everything about internationalization.
Let me just leave direction here by noting that much of the heavy work of laying out the characters which make up each word is handled by Unicode. If you are interested in learning more about LTR, RTL and bidirectional text, watch this video: Introduction to Bidirectional Text, a presentation by Elika Etemad.
Meanwhile, let’s get back to CSS.
The writing mode CSS for Latin-based and Arabic-based systems
For both of these systems—Latin-based and Arabic-based, whether LTR or RTL—the same CSS property applies for specifying the writing mode: writing-mode: horizontal-tb. That’s because in both systems, the inline text flow is horizontal, while the block direction is top-to-bottom. This is expressed as horizontal-tb.
horizontal-tb is the default writing mode for the web, so you don’t need to specify it unless you are overriding something else higher up in the cascade. You can just imagine that every site you’ve ever built came with:
html {
writing-mode: horizontal-tb;
}
Now let’s turn our attention to the vertical writing systems.
Han-based systems
This is where things start to get interesting.
Han-based writing systems include CJK languages, Chinese, Japanese, Korean and others. There are two options for laying out a page, and sometimes both are used at the same time.
Much of CJK text is laid out like Latin-based languages, with a horizontal top-to-bottom block direction, and a left-to-right inline direction. This is the more modern way to doing things, started in the 20th century in many places, and further pushed into domination by the computer and later the web.
The CSS to do this bit of the layouts is the same as above:
section {
writing-mode: horizontal-tb;
}
Or, you know, do nothing, and get that result as a default.
Alternatively Han-based languages can be laid out in a vertical writing mode, where the inline direction runs vertically, and the block direction goes from right to left.
See both options in this diagram:
Note that the horizontal text flows from left to right, while the vertical text flows from right to left. Wild, eh?
This Japanese issue of Vogue magazine is using a mix of writing modes. The cover opens on the left spine, opposite of what an English magazine does.
This page mixes English and Japanese, and typesets the Japanese text in both horizontal and vertical modes. Under the title “Richard Stark” in red, you can see a passage that’s horizontal-tb and LTR, while the longer passage of text at the bottom of the page is typeset vertical-rl. The red enlarged cap marks the beginning of that passage. The long headline above the vertical text is typeset LTR, horizontal-tb.
The details of how to set the default of the whole page will depend on your use case. But each element, each headline, each section, each article can be marked to flow the opposite of the default however you’d like.
For example, perhaps you leave the default as horizontal-tb, and specify your vertical elements like this:
div.articletext {
writing-mode: vertical-rl;
}
Or alternatively you could change the default for the page to a vertical orientation, and then set specific elements to horizontal-tb, like this:
html {
writing-mode: vertical-rl;
}
h2, .photocaptions, section {
writing-mode: horizontal-tb;
}
If your page has a sideways scroll, then the writing mode will determine whether the page loads with upper left corner as the starting point, and scroll to the right (horizontal-tb as we are used to), or if the page loads with the upper right corner as the starting point, scrolling to the left to display overflow. Here’s an example of that change in scrolling direction, in a CSS Writing Mode demo by Chen Hui Jing. Check out her demo — you can switch from horizontal to vertical writing modes with a checkbox and see the difference.
Mongolian-based systems
Now, hopefully so far all of this kind of makes sense. It might be a bit more complicated than expected, but it’s not so hard. Well, enter the Mongolian-based systems.
Mongolian is also a vertical script language. Text runs vertically down the page. Just like Han-based systems. There are two major differences. First, the block direction runs the other way. In Mongolian, block-level elements stack from left to right.
Here’s a drawing of how Wikipedia would look in Mongolian if it were laid out correctly.
Perhaps the Mongolian version of Wikipedia will be redone with this layout.
Now you might think, that doesn’t look so weird. Tilt your head to the left, and it’s very familiar. The block direction starts on the left side of the screen and goes to the right. The inline direction starts on the top of the page and moves to the bottom (similar to RTL text, just turned 90° counter-clockwise). But here comes the other huge difference. The character direction is “upside down”. The top of the Mongolian characters are not pointing to the left, towards the start edge of the block direction. They point to the right. Like this:
Now you might be tempted to ignore all this. Perhaps you don’t expect to be typesetting Mongolian content anytime soon. But here’s why this is important for everyone — the way Mongolian works defines the results writing-mode: vertical-lr. And it means we cannot use vertical-lr for typesetting content in other languages in the way we might otherwise expect.
If we took what we know about vertical-rl and guessed how vertical-lr works, we might imagine this:
But that’s wrong. Here’s how they actually compare:
See the unexpected situation? In both writing-mode: vertical-rl and writing-mode: vertical-lr latin text is rotated clockwise. Neither writing mode let’s us rotate text counter-clockwise.
If you are typesetting Mongolian content, apply this CSS in the same way you would apply writing-mode to Han-based writing systems. To the whole page on the html element, or to specific pages of the page like this:
section {
writing-mode: vertical-lr;
}
Now, if you are using writing-mode for a graphic design effect on a language that is otherwise typesets horizontally, I don’t think writing-mode: vertical-lr is useful. If the text wraps onto two lines, it stacks in a very unexpected way. So I’ve sort of obliterated it from my toolkit. I find myself using writing-mode: vertical-rl a lot. And never using -lr. Hm.
Writing modes for graphic design
So how do we use writing-mode to turn English headlines sideways? We could rely on transform: rotate()
Here are two examples, one for each direction. (By the way, each of these demos use CSS Grid for their overall layout, so be sure to test them in a browser that supports CSS Grid, like Firefox Nightly.)
In this demo 4A, the text is rotated clockwise using this code:
h1 {
writing-mode: vertical-rl;
}
In this demo 4B, the text is rotated counter-clockwise using this code:
h1 {
writing-mode: vertical-rl;
transform: rotate(180deg);
text-align: right;
}
I use vertical-rl to rotate the text so that it takes up the proper amount of space in the overall flow of the layout. Then I rotate it 180° to spin it around to the other direction. And then I use text-align: right to get it to rise up to the top of it’s container. This feels like a hack, but it’s a hack that works.
Now what I would like to do instead is use another CSS value that was designed for this use case — one of the two other options for writing mode.
If I could, I would lay out example 4A with:
h1 {
writing-mode: sideways-rl;
}
And layout example 4B with:
h1 {
writing-mode: sideways-lr;
}
The problem is that these two values are only supported in Firefox. None of the other browsers recognize sideways-*. Which means we can’t really use it yet.
In general, the writing-mode property is very well supported across browsers. So I’ll use writing-mode: vertical-rl for now, with the transform: rotate(180deg); hack to fake the other direction.
There’s much more to what we can do with the CSS designed to support multiple languages, but I’m going to stop with this intermediate introduction.
If you do want a bit more of a taste, look at this example that adds text-orientation: upright; to the mix — turning the individual letters of the latin font to be upright instead of sideways.
It’s this demo 4C, with this CSS applied:
h1 {
writing-mode: vertical-rl;
text-orientation: upright;
text-transform: uppercase;
letter-spacing: -25px;
}
You can check out all my Writing Modes demos at labs.jensimmons.com/#writing-modes.
I’ll leave you with this last demo. One that applies a vertical writing mode to the sub headlines of a long article. I like how small details like this can really bring a fresh feeling to the content.
See the Pen Writing Mode Demo — Article Subheadlines by Jen Simmons (@jensimmons) on CodePen. |
2016 |
Jen Simmons |
jensimmons |
2016-12-23T00:00:00+00:00 |
https://24ways.org/2016/css-writing-modes/ |
code |
| 306 |
What next for CSS Grid Layout? |
In 2012 I wrote an article for 24 ways detailing a new CSS Specification that had caught my eye, at the time with an implementation only in Internet Explorer. What I didn’t realise at the time was that CSS Grid Layout was to become a theme on which I would base the next four years of research, experimentation, writing and speaking.
As I write this article in December 2016, we are looking forward to CSS Grid Layout being shipped in Chrome and Firefox. What will ship early next year in those browsers is expanded and improved from the early implementation I explored in 2012. Over the last four years the spec has been developed as part of the CSS Working Group process, and has had input from browser engineers, specification writers and web developers. Use cases have been discussed, and features added.
The CSS Grid Layout specification is now a Candidate Recommendation. This status means the spec is to all intents and purposes, finished. The discussions now happening are on fine implementation details, and not new feature ideas. It makes sense to draw a line under a specification in order that browser vendors can ship complete, interoperable implementations. That approach is good for all of us, it makes development far easier if we know that a browser supports all of the features of a specification, rather than working out which bits are supported. However it doesn’t mean that works stops here, and that new use cases and features can’t be proposed for future levels of Grid Layout. Therefore, in this article I’m going to take a look at some of the things I think grid layout could do in the future. I would love for these thoughts to prompt you to think about how Grid - or any CSS specification - could better suit the use cases you have.
Subgrid - the missing feature of Level 1
The implementation of CSS Grid Layout in Chrome, Firefox and Webkit is comparable and very feature complete. There is however one standout feature that has not been implemented in any browser as yet - subgrid. Once you set the value of the display property to grid, any direct children of that element become grid items. This is similar to the way that flexbox behaves, set display: flex and all direct children become flex items. The behaviour does not apply to children of those items. You can nest grids, just as you can nest flex containers, but the child grids have no relationship to the parent.
Nesting Grids by Rachel Andrew (@rachelandrew) on CodePen.
The subgrid behaviour would enable the grid defined on the parent to be used by the children. I feel this would be most useful when working with a multiple column flexible grid - for example a typical 12 column grid. I could define a grid on a wrapper, then position UI elements on that grid - from the major structural elements of my page down through the child elements to a form where I wanted the field to line up with items above.
The specification contained an initial description of subgrid, with a value of subgrid for grid-template-columns and grid-template-rows, you can read about this in the August 2015 Working Draft. This version of the specification would have meant you could declare a subgrid in one dimension only, and create a different set of tracks in the other.
In an attempt to get some implementation of subgrid, a revised specification was proposed earlier this year. This gives a single subgrid value of the display property. As we now cannot specify a subgrid on rows OR columns this limits us to have a subgrid that works in two dimensions. At this point neither version has been implemented by anyone, and subgrids are marked as “at risk” in the Level 1 Candidate Recommendation. With regard to ‘at-risk’ this is explained as follows:
“‘At-risk’ is a W3C Process term-of-art, and does not necessarily imply that the feature is in danger of being dropped or delayed. It means that the WG believes the feature may have difficulty being interoperably implemented in a timely manner, and marking it as such allows the WG to drop the feature if necessary when transitioning to the Proposed Rec stage, without having to publish a new Candidate Rec without the feature first.”
If we lose subgrid from Level 1, as it looks likely that we will, this does give us a chance to further discuss and iterate on that feature. My current thoughts are that I’m not completely happy about subgrids being tied to both dimensions and feel that a return to the earlier version, or something like it, would be preferable.
Further reading about subgrid
My post from 2015 detailing why I feel subgrid is important
My post based on the revised specification
Eric Meyer’s thoughts on subgrid
Write-up of a discussion from Igalia who work on the Blink and Webkit browser implementations
Styling cells, tracks and areas
Having defined a grid with CSS Grid Layout you can place child elements into that grid, however what you can’t do is style the grid tracks or cells. Grid doesn’t even go as far as multiple column layout, which has the column-rule properties.
In order to set a background colour on a grid cell at the moment you would have to add an empty HTML element or insert some generated content as in the below example. I’m using a 1 pixel grid gap to fake lines between grid cells, and empty div elements, and some generated content to colour those cells.
Faked backgrounds and borders by Rachel Andrew (@rachelandrew) on CodePen.
I think it would be a nice addition to Grid Layout to be able to directly add backgrounds and borders to cells, tracks and areas. There is an Issue raised in the CSS WG Drafts repository for Decorative Grid Cell pseudo-elements, if you want to add thoughts to that.
More control over auto placement
If you haven’t explicitly placed the direct children of your grid element they will be laid out according to the grid auto placement rules. You can see in this example how we have created a grid and the items are placing themselves into cells on that grid.
Items auto-place on a defined grid by Rachel Andrew (@rachelandrew) on CodePen.
The auto-placement algorithm is very cool. We can position some items, leaving others to auto-place; we can set items to span more than one track; we can use the grid-auto-flow property with a value of dense to backfill gaps in our grid.
Websafe colors meet CSS Grid (auto-placement demo) by Rachel Andrew (@rachelandrew) on CodePen.
I think however this could be taken further. In this issue posted to my CSS Grid AMA on GitHub, the question is raised as to whether it would be possible to ask grid to place items on the next available line of a certain name. This would allow you to skip tracks in the grid when using auto-placement, an issue that has also been raised by Emil Björklund in this post to the www-style list prior to spec discussion moving to Github. I think there are probably similar issues, if you can think of one add a comment here.
Creating non-rectangular grid areas
A grid area is a collection of grid cells, defined by setting the start and end lines for columns and rows or by creating the area in the value of the grid-template-areas property as shown below. Those areas however must be rectangular - you can’t create an L-shaped or otherwise non-regular shape.
Grid Areas by Rachel Andrew (@rachelandrew) on CodePen.
Perhaps in the future we could define an L-shape or other non-rectangular area into which content could flow, as in the below currently invalid code where a quote is embedded into an L-shaped content area.
.wrapper {
display: grid;
grid-template-areas:
"sidebar header header"
"sidebar content quote"
"sidebar content content";
}
Flowing content through grid cells or areas
Some uses cases I have seen perhaps are not best solved by grid layout at all, but would involve grid working alongside other CSS specifications. As I detail in this post, there are a class of problems that I believe could be solved with the CSS Regions specification, or a revised version of that spec.
Being able to create a grid layout, then flow content through the areas could be very useful. Jen Simmons presented to the CSS Working Group at the Lisbon meeting a suggestion as to how this might work.
In a post from earlier this year I looked at a collection of ideas from specifications that include Grid, Regions and Exclusions. These working notes from my own explorations might prompt ideas of your own.
Solving the keyboard/layout disconnect
One issue that grid, and flexbox to a lesser extent, raises is that it is very easy to end up with a layout that is disconnected from the underlying markup. This raises problems for people navigating using the keyboard as when tabbing around the document you find yourself jumping to unexpected places. The problem is explained by Léonie Watson with reference to flexbox in Flexbox and the keyboard navigation disconnect.
The grid layout specification currently warns against creating such a disconnect, however I think it will take careful work by web developers in order to prevent this. It’s also not always as straightforward as it seems. In some cases you want the logical order to follow the source, and others it would make more sense to follow the visual. People are thinking about this issue, as you can read in this mailing list discussion.
Bringing your ideas to the future of Grid Layout
When I’m not getting excited about new CSS features, my day job involves working on a software product - the CMS that is serving this very website, Perch. When we launched Perch there were many use cases that we had never thought of, despite having a good idea of what might be needed in a CMS and thinking through lots of use cases. The additional use cases brought to our attention by our customers and potential customers informed the development of the product from launch. The same will be true for Grid Layout.
As a “product” grid has been well thought through by many people. Yet however hard we try there will be use cases we just didn’t think of. You may well have one in mind right now. That’s ok, because as with any CSS specification, once Level One of grid is complete, work can begin on Level Two. The feature set of Level Two will be informed by the use cases that emerge as people get to grips with what we have now.
This is where you get to contribute to the future of layout on the web. When you hit up against the things you cannot do, don’t just mutter about how the CSS Working Group don’t listen to regular developers and code around the problem. Instead, take a few minutes and write up your use case. Post it to your blog, to Medium, create a CodePen and go to the CSS Working Group GitHub specs repository and post an issue there. Write some pseudo-code, draw a picture, just make sure that the use case is described in enough detail that someone can see what problem you want grid to solve. It may be that - as with any software development - your use case can’t be solved in exactly the way you suggest. However once we have a use case, collected with other use cases, methods of addressing that class of problems can be investigated.
I opened this article by explaining I’d written about grid layout four years ago, and how we’re only now at a point where we will have Grid Layout available in the majority of browsers. Specification development, and implementation into browsers takes time. This is actually a good thing, as it’s impossible to take back CSS once it is out there and being used by production websites. We want CSS in the wild to be well thought through and that takes time. So don’t feel that because you don’t see your use case added to a spec immediately it has been ignored. Do your future self a favour and write down your frustrations or thoughts, and we can all make sure that the web platform serves the use cases we’re dealing with now and in the future. |
2016 |
Rachel Andrew |
rachelandrew |
2016-12-12T00:00:00+00:00 |
https://24ways.org/2016/what-next-for-css-grid-layout/ |
code |
| 307 |
Get the Balance Right: Responsive Display Text |
Last year in 24 ways I urged you to Get Expressive with Your Typography. I made the case for grabbing your readers’ attention by setting text at display sizes, that is to say big. You should consider very large text in the same way you might a hero image: a picture that creates an atmosphere and anchors your layout.
When setting text to be read, it is best practice to choose body and subheading sizes from a pre-defined scale appropriate to the viewport dimensions. We set those sizes using rems, locking the text sizes together so they all scale according to the page default and your reader’s preferences. You can take the same approach with display text by choosing larger sizes from the same scale.
However, display text, as defined by its purpose and relative size, is text to be seen first, and read second. In other words a picture of text. When it comes to pictures, you are likely to scale all scene-setting imagery - cover photos, hero images, and so on - relative to the viewport. Take the same approach with display text: lock the size and shape of the text to the screen or browser window.
Introducing viewport units
With CSS3 came a new set of units which are locked to the viewport. You can use these viewport units wherever you might otherwise use any other unit of length such as pixels, ems or percentage. There are four viewport units, and in each case a value of 1 is equal to 1% of either the viewport width or height as reported in reference1 pixels:
vw - viewport width,
vh - viewport height,
vmin - viewport height or width, whichever is smaller
vmax - viewport height or width, whichever is larger
In one fell swoop you can set the size of a display heading to be proportional to the screen or browser width, rather than choosing from a scale in a series of media queries. The following makes the heading font size 13% of the viewport width:
h1 {
font-size: 13 vw;
}
So for a selection of widths, the rendered font size would be:
Rendered font size (px)
Viewport width
13 vw
320
42
768
100
1024
133
1280
166
1920
250
A problem with using vw in this manner is the difference in text block proportions between portrait and landscape devices. Because the font size is based on the viewport width, the text on a landscape display is far bigger than when rendered on the same device held in a portrait orientation.
Landscape text is much bigger than portrait text when using vw units.
The proportions of the display text relative to the screen are so dissimilar that each orientation has its own different character, losing the inconsistency and considered design you would want when designing to make an impression.
However if the text was the same size in both orientations, the visual effect would be much more consistent. This where vmin comes into its own. Set the font size using vmin and the size is now set as a proportion of the smallest side of the viewport, giving you a far more consistent rendering.
h1 {
font-size: 13vmin;
}
Landscape text is consistent with portrait text when using vmin units.
Comparing vw and vmin renderings for various common screen dimensions, you can see how using vmin keeps the text size down to a usable magnitude:
Rendered font size (px)
Viewport
13 vw
13 vmin
320 × 480
42
42
414 × 736
54
54
768 × 1024
100
100
1024 × 768
133
100
1280 × 720
166
94
1366 × 768
178
100
1440 × 900
187
117
1680 × 1050
218
137
1920 × 1080
250
140
2560 × 1440
333
187
Hybrid font sizing
Using vertical media queries to set text in direct proportion to screen dimensions works well when sizing display text. In can be less desirable when sizing supporting text such as sub-headings, which you may not want to scale upwards at the same rate as the display text. For example, we can size a subheading using vmin so that it starts at 16 px on smaller screens and scales up in the same way as the main heading:
h1 {
font-size: 13vmin;
}
h2 {
font-size: 5vmin;
}
Using vmin alone for supporting text can scale it too quickly
The balance of display text to supporting text on the phone works well, but the subheading text on the tablet, even though it has been increased in line with the main heading, is starting to feel disproportionately large and a little clumsy. This problem becomes magnified on even bigger screens.
A solution to this is use a hybrid method of sizing text2. We can use the CSS calc() function to calculate a font size simultaneously based on both rems and viewport units. For example:
h2 {
font-size: calc(0.5rem + 2.5vmin);
}
For a 320 px wide screen, the font size will be 16 px, calculated as follows:
(0.5 × 16) + (320 × 0.025) = 8 + 8 = 16px
For a 768 px wide screen, the font size will be 27 px:
(0.5 × 16) + (768 × 0.025) = 8 + 19 = 27px
This results in a more balanced subheading that doesn’t take emphasis away from the main heading:
To give you an idea of the effect of using a hybrid approach, here’s a side-by-side comparison of hybrid and viewport text sizing:
table.ex--scale{width:100%;overflow: hidden;} table.ex--scale td{vertical-align:baseline;text-align:center;padding:0} tr.ex--scale-key{color:#666} tr.ex--scale-key td{font-size:.875rem;padding:0 0.125em} .ex--scale-2 tr.ex--scale-size{color:#ccc} tr.ex--scale-size td{font-size:1em;line-height:.34em;padding-bottom:.5rem} td.ex--scale-step{color:#000} td.ex--scale-hilite{color:red} .ex--scale-3 tr.ex--scale-size td{line-height:.9em}
top: calc() hybrid method; bottom: vmin only
16
20
27
32
35
40
44
16
24
38
48
54
64
72
320
480
768
960
1080
1280
1440
Over this festive period, try experiment with the proportion of rem and vmin in your hybrid calculation to see what feels best for your particular setting.
A reference pixel is based on the logical resolution of a device which takes into account double density screens such as Retina displays. ↩︎
For even more sophisticated uses of hybrid text sizing see the work of Mike Riethmuller. ↩︎ |
2016 |
Richard Rutter |
richardrutter |
2016-12-09T00:00:00+00:00 |
https://24ways.org/2016/responsive-display-text/ |
code |
| 308 |
How to Make a Chrome Extension to Delight (or Troll) Your Friends |
If you’re like me, you grew up drawing mustaches on celebrities. Every photograph was subject to your doodling wrath, and your brilliance was taken to a whole new level with computer programs like Microsoft Paint. The advent of digital cameras meant that no one was safe from your handiwork, especially not your friends. And when you finally got your hands on Photoshop, you spent hours maniacally giggling at your artistic genius.
But today is different. You’re a serious adult with important things to do and a reputation to uphold. You keep up with modern web techniques and trends, and have little time for fun other than a random Giphy on Slack… right?
Nope.
If there’s one thing 2016 has taught me, it’s that we—the self-serious, world-changing tech movers and shakers of the universe—haven’t changed one bit from our younger, more delightable selves.
How do I know? This year I created a Chrome extension called Tabby Cat and watched hundreds of thousands of people ditch productivity for randomly generated cats. Tabby Cat replaces your new tab page with an SVG cat featuring a silly name like “Stinky Dinosaur” or “Tiny Potato”. Over time, the cats collect goodies that vary in absurdity from fishbones to lawn flamingos to Raybans. Kids and adults alike use this extension, and analytics show the majority of use happens Monday through Friday from 9-5. The popularity of Tabby Cat has convinced me there’s still plenty of room in our big, grown-up hearts for fun.
Today, we’re going to combine the formula behind Tabby Cat with your intrinsic desire to delight (or troll) your friends, and create a web app that generates your friends with random objects and environments of your choosing. You can publish it as a Chrome extension to replace your new tab, or simply host it as a website and point to it with the New Tab Redirect extension.
Here’s a sneak peek at my final result featuring my partner, my cat, and I in cheerfully weird accessories. Your result will look however you want it to.
Along the way, we’ll cover how to build a Chrome extension that replaces the new tab page, and explore ways to program randomness into your work to create something truly delightful.
What you’ll need
Adobe Illustrator (or a similar illustration program to export PNG)
Some images of your friends
A text editor
Note: This can be as simple or as complex as you want it to be. Most of the application is pre-built so you can focus on kicking back and getting in touch with your creative side. If you want to dive in deeper, you’ll find ways to do it.
Getting started
Download a local copy of the boilerplate for today’s tutorial here, and open it in a text editor. Inside, you’ll find a simple web app that you can run in Chrome.
Open index.html in Chrome. You should see a grey page that says “Noname”.
Open template.pdf in Adobe Illustrator or a similar program that can export PNG. The file contains an artboard measuring 800px x 800px, with a dotted blue outline of a face. This is your template.
Note: We’re using Google Chrome to build and preview this application because the end-result is a Chrome extension. This means that the application isn’t totally cross-browser compatible, but that’s okay.
Step 1: Gather your friends
The first thing to do is choose who your muses are. Since the holidays are upon us, I’d suggest finding inspiration in your family.
Create your artwork
For each person, find an image where their face is pointed as forward as possible. Place the image onto the Artwork layer of the Illustrator file, and line up their face with the template. Then, rename the artboard something descriptive like face_bob. Here’s my crew:
As you can see, my use of the word “family” extends to cats. There’s no judgement here.
Notice that some of my photos don’t completely fill the artboard–that’s fine. The images will be clipped into ovals when they’re rendered in the application.
Now, export your images by following these steps:
Turn the Template layer off and export the images as PNGs.
In the Export dialog, tick the “Use Artboards” checkbox and enter the range with your faces.
Export at 72ppi to keep things running fast.
Save your images into the images/ folder in your project.
Add your images to config.js
Open scripts/config.js. This is where you configure your extension.
Add key value pairs to the faces object. The key should be the person’s name, and the value should be the filepath to the image.
faces: {
leslie: 'images/face_leslie.png',
kyle: 'images/face_kyle.png',
beep: 'images/face_beep.png'
}
The application will choose one of these options at random each time you open a new tab. This pattern is used for everything in the config file. You give the application groups of choices, and it chooses one at random each time it loads. The only thing that’s special about the faces object is that person’s name will also be displayed when their face is chosen.
Now, when you refresh the project in Chrome, you should see one of your friends along with their name, like this:
Congrats, you’re off and running!
Step 2: Add adjectives
Now that you’ve loaded your friends into the application, it’s time to call them names. This step definitely yields the most laughs for the least amount of effort.
Add a list of adjectives into the prefixes array in config.js. To get the words flowing, I took inspiration from ways I might describe some of my relatives during a holiday gathering…
prefixes: [
'Loving',
'Drunk',
'Chatty',
'Merry',
'Creepy',
'Introspective',
'Cheerful',
'Awkward',
'Unrelatable',
'Hungry',
...
]
When you refresh Chrome, you should see one of these words prefixed before your friend’s name. Voila!
Step 3: Choose your color palette
Real talk: I’m bad at choosing color palettes, so I have a trick up my sleeve that I want to share with you. If you’ve been blessed with the gift of color aptitude, skip ahead.
How to choose colors
To create a color palette, I start by going to a Coolors.co, and I hit the spacebar until I find a palette that I like. We need a wide gamut of hues for our palette, so lock down colors you like and keep hitting the spacebar until you find a nice, full range. You can use as many or as few colors as you like.
Copy these colors into your swatches in Adobe Illustrator. They’ll be the base for any illustrations you create later.
Now you need a set of background colors. Here’s my trick to making these consistent with your illustration palette without completely blending in. Use the “Adjust Palette” tool in Coolors to dial up the brightness a few notches, and the saturation down just a tad to remove any neon effect. These will be your background colors.
Add your background colors to config.js
Copy your hex codes into the bgColors array in config.js.
bgColors: [
'#FFDD77',
'#FF8E72',
'#ED5E84',
'#4CE0B3',
'#9893DA',
...
]
Now when you go back to Chrome and refresh the page, you’ll see your new palette!
Step 4: Accessorize
This is the fun part. We’re going to illustrate objects, accessories, lizards—whatever you want—and layer them on top of your friends.
Your objects will be categorized into groups, and one option from each group will be randomly chosen each time you load the page. Think of a group like “hats” or “glasses”. This will allow combinations of accessories to show at once, without showing two of the same type on the same person.
Create a group of accessories
To get started, open up Illustrator and create a new artboard out of the template. Think of a group of objects that you can riff on. I found hats to be a good place to start. If you don’t feel like illustrating, you can use cut-out images instead.
Next, follow the same steps as you did when you exported the faces. Here they are again:
Turn the Template layer off and export the images as PNGs.
In the Export dialog, tick the “Use Artboards” checkbox and enter the range with your hats.
Export at 72ppi to keep things running fast.
Save your images into the images/ folder in your project.
Add your accessories to config.js
In config.js, add a new key to the customProps object that describes the group of accessories that you just created. Its value should be an array of the filepaths to your images. This is my hats array:
customProps: {
hats: [
'images/hat_crown.png',
'images/hat_santa.png',
'images/hat_tophat.png',
'images/hat_antlers.png'
]
}
Refresh Chrome and behold, accessories!
Create as many more accessories as you want
Repeat the steps above to create as many groups of accessories as you want. I went on to make glasses and hairstyles, so my final illustrator file looks like this:
The last step is adding your new groups to the config object. List your groups in the order that you want them to be stacked in the DOM. My final output will be hair, then hats, then glasses:
customProps: {
hair: [
'images/hair_bowl.png',
'images/hair_bob.png'
],
hats: [
'images/hat_crown.png',
'images/hat_santa.png',
'images/hat_tophat.png',
'images/hat_antlers.png'
],
glasses: [
'images/glasses_aviators.png',
'images/glasses_monacle.png'
]
}
And, there you have it! Randomly generated friends with random accessories.
Feel free to go much crazier than I did. I considered adding a whole group of animals in celebration of the new season of Planet Earth, or even adding Sir David Attenborough himself, or doing a bit of role reversal and featuring the animals with little safari hats! But I digress…
Step 5: Publish it
It’s time to put this in your new tabs! You have two options:
Publish it as a Chrome extension in the Chrome Web Store.
Host it as a website and point to it with the New Tab Redirect extension.
Today, we’re going to cover Option #1 because I want to show you how to make the simplest Chrome extension possible. However, I recommend Option #2 if you want to keep your project private. Every Chrome extension that you publish is made publicly available, so unless your friends want their faces published to an extension that anyone can use, I’d suggest sticking to Option #2.
How to make a simple Chrome extension to replace the new tab page
All you need to do to make your project into a Chrome extension is add a manifest.json file to the root of your project with the following contents. There are plenty of other properties that you can add to your manifest file, but these are the only ones that are required for a new tab replacement:
{
"manifest_version": 2,
"name": "Your extension name",
"version": "1.0",
"chrome_url_overrides" : {
"newtab": "index.html"
}
}
To test your extension, you’ll need to run it in Developer Mode. Here’s how to do that:
Go to the Extensions page in Chrome by navigating to chrome://extensions/.
Tick the checkbox in the upper-right corner labelled “Developer Mode”.
Click “Load unpacked extension…” and select this project.
If everything is running smoothly, you should see your project when you open a new tab. If there are any errors, they should appear in a yellow box on the Extensions page.
Voila! Like I said, this is a very light example of a Chrome extension, but Google has tons of great documentation on how to take things further. Check it out and see what inspires you.
Share the love
Now that you know how to make a new tab extension, go forth and create! But wield your power responsibly. New tabs are opened so often that they’ve become a part of everyday life–just consider how many tabs you opened today. Some people prefer to-do lists in their tabs, and others prefer cats.
At the end of the day, let’s make something that makes us happy. Cheers! |
2016 |
Leslie Zacharkow |
lesliezacharkow |
2016-12-08T00:00:00+00:00 |
https://24ways.org/2016/how-to-make-a-chrome-extension/ |
code |
| 309 |
HTTP/2 Server Push and Service Workers: The Perfect Partnership |
Being a web developer today is exciting! The web has come a long way since its early days and there are so many great technologies that enable us to build faster, better experiences for our users. One of these technologies is HTTP/2 which has a killer feature known as HTTP/2 Server Push.
During this year’s Chrome Developer Summit, I watched a really informative talk by Sam Saccone, a Software Engineer on the Google Chrome team. He gave a talk entitled Planning for Performance, and one of the topics that he covered immediately piqued my interest; the idea that HTTP/2 Server Push and Service Workers were the perfect web performance combination.
If you’ve never heard of HTTP/2 Server Push before, fear not - it’s not as scary as it sounds. HTTP/2 Server Push simply allows the server to send data to the browser without having to wait for the browser to explicitly request it first. In this article, I am going to run through the basics of HTTP/2 Server Push and show you how, when combined with Service Workers, you can deliver the ultimate in web performance to your users.
What is HTTP/2 Server Push?
When a user navigates to a URL, a browser will make an HTTP request for the underlying web page. The browser will then scan the contents of the HTML document for any assets that it may need to retrieve such as CSS, JavaScript or images. Once it finds any assets that it needs, it will then make multiple HTTP requests for each resource that it needs and begin downloading one by one. While this approach works well, the problem is that each HTTP request means more round trips to the server before any data arrives at the browser. These extra round trips take time and can make your web pages load slower.
Before we go any further, let’s see what this might look like when your browser makes a request for a web page. If you were to view this in the developer tools of your browser, it might look a little something like this:
As you can see from the image above, once the HTML file has been downloaded and parsed, the browser then makes HTTP requests for any assets that it needs.
This is where HTTP/2 Server Push comes in. The idea behind HTTP/2 Server Push is that when the browser requests a web page from the server, the server already knows about all the assets that are needed for the web page and “pushes” it to browser. This happens when the first HTTP request for the web page takes place and it eliminates an extra round trip, making your site faster.
Using the same example above, let’s “push” the JavaScript and CSS files instead of waiting for the browser to request them. The image below gives you an idea of what this might look like.
Whoa, that looks different - let’s break it down a little. Firstly, you can see that the JavaScript and CSS files appear earlier in the waterfall chart. You might also notice that the loading times for the files are extremely quick. The browser doesn’t need to make an extra HTTP request to the server, instead it receives the critical files it needs all at once. Much better!
There are a number of different approaches when it comes to implementing HTTP/2 Server Push. Adoption is growing and many commercial CDNs such as Akamai and Cloudflare already offer support for Server Push. You can even roll your own implementation depending on your environment. I’ve also previously blogged about building a basic HTTP/2 Server Push example using Node.js. In this post, I’m not going to dive into how to implement HTTP/2 Server Push as that is an entire post in itself! However, I do recommend reading this article to find out more about the inner workings.
HTTP/2 Server Push is awesome, but it isn’t a magic bullet. It is fantastic for improving the load time of a web page when it first loads for a user, but it isn’t that great when they request the same web page again. The reason for this is that HTTP/2 Server Push is not cache “aware”. This means that the server isn’t aware about the state of your client. If you’ve visited a web page before, the server isn’t aware of this and will push the resource again anyway, regardless of whether or not you need it. HTTP/2 Server Push effectively tells the browser that it knows better and that the browser should receive the resources whether it needs them or not. In theory browsers can cancel HTTP/2 Server Push requests if they’re already got something in cache but unfortunately no browsers currently support it. The other issue is that the server will have already started to send some of the resource to the browser by the time the cancellation occurs.
HTTP/2 Server Push & Service Workers
So where do Service Workers fit in? Believe it or not, when combined together HTTP/2 Server Push and Service Workers can be the perfect web performance partnership. If you’ve not heard of Service Workers before, they are worker scripts that run in the background of your website. Simply put, they act as middleman between the client and the browser and enable you to intercept any network requests that come and go from the browser. They are packed with useful features such as caching, push notifications, and background sync. Best of all, they are written in JavaScript, making it easy for web developers to understand.
Using Service Workers, you can easily cache assets on a user’s device. This means when a browser makes an HTTP request for an asset, the Service Worker is able to intercept the request and first check if the asset already exists in cache on the users device. If it does, then it can simply return and serve them directly from the device instead of ever hitting the server.
Let’s stop for a second and analyse what that means. Using HTTP/2 Server Push, you are able to push critical assets to the browser before the browser requests them. Then, using Service Workers you are able to cache these resources so that the browser never needs to make a request to the server again. That means a super fast first load and an even faster second load!
Let’s put this into action. The following HTML code is a basic web page that retrieves a few images and two JavaScript files.
<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8">
<title>HTTP2 Push Demo</title>
</head>
<body>
<h1>HTTP2 Push</h1>
<img src="./images/beer-1.png" width="200" height="200" />
<img src="./images/beer-2.png" width="200" height="200" />
<br>
<br>
<img src="./images/beer-3.png" width="200" height="200" />
<img src="./images/beer-4.png" width="200" height="200" />
<!-- Scripts -->
<script async src="./js/promise.min.js"></script>
<script async src="./js/fetch.js"></script>
<script>
// Register the service worker
if ('serviceWorker' in navigator) {
navigator.serviceWorker.register('./service-worker.js').then(function(registration) {
// Registration was successful
console.log('ServiceWorker registration successful with scope: ', registration.scope);
}).catch(function(err) {
// registration failed :(
console.log('ServiceWorker registration failed: ', err);
});
}
</script>
</body>
</html>
In the HTML code above, I am registering a Service Worker file named service-worker.js. In order to start caching assets, I am going to use the Service Worker toolbox . It is a lightweight helper library to help you get started creating your own Service Workers. Using this library, we can actually cache the base web page with the path /push.
The Service Worker Toolbox comes with a built-in routing system which is based on the same routing as Express. With just a few lines of code, you can start building powerful caching patterns.
I’ve add the following code to the service-worker.js file.
(global => {
'use strict';
// Load the sw-toolbox library.
importScripts('/js/sw-toolbox/sw-toolbox.js');
// The route for any requests
toolbox.router.get('/push', global.toolbox.fastest);
toolbox.router.get('/images/(.*)', global.toolbox.fastest);
toolbox.router.get('/js/(.*)', global.toolbox.fastest);
// Ensure that our service worker takes control of the page as soon as possible.
global.addEventListener('install', event => event.waitUntil(global.skipWaiting()));
global.addEventListener('activate', event => event.waitUntil(global.clients.claim()));
})(self);
Let’s break this code down further. Around line 4, I am importing the Service Worker toolbox. Next, I am specifying a route that will listen to any requests that match the URL /push. Because I am also interested in caching the images and JavaScript for that page, I’ve told the toolbox to listen to these routes too.
The best thing about the code above is that if any of the assets exist in cache, we will instantly return the cached version instead of waiting for it to download. If the asset doesn’t exist in cache, the code above will add it into cache so that we can retrieve it when it’s needed again.
You may also notice the code global.toolbox.fastest - this is important because gives you the compromise of fulfilling from the cache immediately, while firing off an additional HTTP request updating the cache for the next visit.
But what does this mean when combined with HTTP/2 Server Push? Well, it means that on the first load of the web page, you are able to “push” everything to the user at once before the browser has even requested it. The Service Worker activates and starts caching the assets on the users device. The next time a user visits the page, the Service Worker will intercept the request and serve the asset directly from cache. Amazing!
Using this technique, the waterfall chart for a repeat visit should look like the image below.
If you look closely at the image above, you’ll notice that the web page returns almost instantly without ever making an HTTP request over the network. Using the Service Worker library, we cached the base page for the route /push, which allowed us to retrieve this directly from cache.
Whether used on their own or combined together, the best thing about these two features is that they are the perfect progressive enhancement. If your user’s browser doesn’t support them, they will simply fall back to HTTP/1.1 without Service Workers. Your users may not experience as fast a load time as they would with these two techniques, but it would be no different from their normal experience. HTTP/2 Server Push and Service Workers are really the perfect partners when it comes to web performance.
Summary
When used correctly, HTTP/2 Server Push and Service Workers can have a positive impact on your site’s load times. Together they mean super fast first load times and even faster repeat views to a web page. Whilst this technique is really effective, it’s worth noting that HTTP/2 push is not a magic bullet. Think about the situations where it might make sense to use it and don’t just simply “push” everything; it could actually lead to having slower page load times. If you’d like to learn more about the rules of thumb for HTTP/2 Server Push, I recommend reading this article for more information.
All of the code in this example is available on my Github repo - if you have any questions, please submit an issue and I’ll get back to you as soon as possible.
If you’d like to learn more about this technique and others relating to HTTP/2, I highly recommend watching Sam Saccone’s talk at this years Chrome Developer Summit.
I’d also like to say a massive thank you to Robin Osborne, Andy Davies and Jeffrey Posnick for helping me review this article before putting it live! |
2016 |
Dean Hume |
deanhume |
2016-12-15T00:00:00+00:00 |
https://24ways.org/2016/http2-server-push-and-service-workers/ |
code |
| 310 |
Fairytale of new Promise |
There are only four good Christmas songs.
I know, yeah, JavaScript or whatever. We’ll get to that in a minute, I promise.
First—and I cannot stress this enough— there are four good Christmas songs. You’re free to disagree with me here, of course, but please try to understand that you will be wrong.
They don’t all have the most safe-for-work titles; I can’t list all of them here, but if you choose to let your fingers do the walkin’ to your nearest search engine, I will say that one was released by the band FEAR way back in 1982 and one was on Run the Jewels’ self-titled debut album. The lyrics are a hell of a lot worse than the titles, so maybe wait until you get home from work before you queue them up. Wear headphones, if you’ve got thin walls.
For my money, though, the two I can reference by name are the top of that small heap: Tom Waits’ Christmas Card from a Hooker in Minneapolis, and The Pogues’ Fairytale of New York. The former once held the honor of being the only good Christmas song—about which which I was also unequivocally correct, right up until I changed my mind. It’s not the song up for discussion today, but feel free to familiarize yourself just the same—I’ll wait.
Fairytale of New York—the top of the list—starts out by hinting at some pretty standard holiday fare; dreams and cheer and whatnot. Typical seasonal stuff, so long as you ignore that the story seems to be recounted as a drunken flashback in a jail cell. You can probably make a few guesses at the underlying spirit of the song based on that framing: following a lucky break, our bright-eyed protagonists move to New York in search of fame and fortune, only to quickly descend into bad decisions, name-calling, and vaguely festive chaos.
This song speaks to me on a couple of levels, not the least of which is as a retelling of my day-to-day interactions with JavaScript. Each day’s melody might vary a little bit, granted, but the lyrics almost always follow a pretty clear arc toward “PARENTAL ADVISORY: EXPLICIT CONTENT.” You might have heard a similar tune yourself; it goes a little somethin’ like setTimeout(function() { console.log( "this should be happening last" ); }, 1000); . Callbacks are calling callbacks calling callbacks and something is happening somewhere, as the JavaScript interpreter plods through our code start-to-finish, line-by-line, step-by-step. If we need to take actions based on the results of something that could take its sweet time resolving, well, we’d better fiddle with the order of things to make sure those actions don’t happen too soon.
“But I can see a better time,” as the song says, “when all our dreams come true.” So, with that Pogues brand of holiday spirit squarely in mind—by which I mean that your humble narrator is almost certainly drunk, and may be incarcerated at the time of publication—gather ’round for a story of hope, of hardships, of semi-asynchronous JavaScript programming, and ultimately: of Promise unfulfilled.
The Main Thread
JavaScript is single-minded, in a manner of speaking. Anything we tell the JavaScript runtime to do goes into a single-file queue; you’ll see it referred to as the “main thread,” or “UI thread.” That thread can be shared by a number of critical browser processes, like rendering and re-rendering parts of the page, and user interactions ranging from the simple—say, highlighting text—to the more complex—interacting with form elements.
If that sounds a little scary to you, well, that’s because it is. The more complex our scripts, the more we’re cramming into that single-file main thread, to be processed along with—say—some of our CSS animations. Too much JavaScript clogging up the main thread means a lot of user-facing performance jankiness. Getting away from that single thread is a big part of all the excitement around Web Workers, which allow us to offload entire scripts into their own dedicated background threads—though not without limitations of their own. Outside of Web Workers, that everything-thread is the only game in town: scripts executed one thing at a time, functions calling functions calling functions, taking numbers and crowding up the same deli counter as a user’s interactions—which, in this already strained metaphor, would be ham, I guess?
Asynchronous JavaScript
Now, those queued actions may include asynchronous things. For example: AJAX callbacks, setTimeout/setInterval, and addEventListener won’t block the main thread while we’re waiting for a request to come back, a timer to tick away, or an event to trigger. Once those things do kick in, though, the actions they’re meant to perform will get shuffled right back into that single-thread queue.
There are a couple of places you might have written asynchronously-fired JavaScript, even if you’re not super familiar with the overarching concept: XMLHttpRequest—“AJAX,” if ya nasty—or just kicking off a function once a user triggers a click or mouseenter event. Event-driven development is writ a little larger, with the overall flow of the script dictated by events, both internal and external. Writing event-driven JavaScript applications is a step in the right direction for sure—it won’t cure what ails the main thread, but it does work with the medium in a reasonable way. Event-driven development allows us to manage our use of the main thread in a way that makes sense. If any of this rings a bell for you, the motivation for Promises should feel familiar.
For example, a custom init event might kick things off, and fire a create event that applies our classes and restructures our markup which, on completion, fires a bindEvents event to handle all the event listeners for user interaction. There might not sound like much difference between that and one big function that kicks off, manipulates the DOM, and binds our events line-by-line—but in a script of sufficient size and complexity we’re not only provided with a decoupled flow through the script, but obvious touchpoints for future updates and a predictable structure for ongoing maintenance.
This pattern falls apart a little where we were still creating, binding, and listening for events in the same top-to-bottom, one-item-at-a-time way—we had to set a listener on a given object before the event fires, or nothing would happen:
// Create the event:
var event = document.createEvent( "Event" );
// Name the event:
event.initEvent( "doTheStuff", true, true );
// Listen for the custom `doTheStuff` event on `window`:
window.addEventListener( "doTheStuff", initializeEverything );
// Fire the custom event
window.dispatchEvent( event );
This example is a little contrived, and this stuff is a lot more manageable for sure with the addition of a framework, but that’s the basic gist: create and name the event, add a listener for the event, and—after setting our listener—dispatch the event.
Events and callbacks aren’t the only game in town for weaving our way in and out of the main thread, though—at least, not anymore.
Promises
A Promise is, at the risk of sounding sentimental, pure potential—an empty container into which a value eventually results. A Promise can exist in several states: “pending,” while the computation they contain is being performed or “resolved” once that computation is complete. Once resolved, a Promise is “fulfilled” if it gave us back something we expect, or “rejected” if it didn’t.
The Promise constructor accepts a callback with two arguments: resolve and reject. We perform an action—asynchronous or otherwise—within that callback. If everything in there has gone according to plan, we call resolve. If something has gone awry, we call reject—with an error, conventionally. To illustrate, let’s tack something together with a pretty decent chance of doing what we don’t want: a promise meant only to give us the number 1, but has a chance of giving us back a 2. No reasonable person would ever do this, of course, but I wouldn’t necessarily put it past me.
var promisedOne = new Promise( function( resolve, reject ) {
var coinToss = Math.floor( Math.random() * 2 ) + 1;
if( coinToss === 1 ) {
resolve( coinToss );
} else {
reject( new Error( "That ain’t a one." ) );
}
});
There’s nothing too surprising in there, after you boil it all down. It’s a little return-y, with the exception that we’re flagging results as “as expected” or “something went wrong.”
Tapping into that Promise uses another new keyword: then—and as someone who attempts to make sense of JavaScript by breaking it down to plain ol’ human-language, I’m a big fan of this syntax. then is tacked onto our Promise identifier, and does just what it says on the tin: once the Promise is resolved, then do one of two things, both supplied as callbacks: the first in the case of a fulfilled promise, and the second in the case of a rejected one. Those two callbacks will have, as arguments, the results we specified with resolve orreject, respectively. It sounds like a lot in prose, but in code it’s a pretty simple pattern:
promisedOne.then( function( result ) {
console.log( result );
}, function( error ) {
console.error( error );
});
If you’ve spent any time working with AJAX—jQuery-wise, in particular—you’ve seen something like this pattern before: a success callback and an error callback. The state of a promise, once fulfilled or rejected, cannot be changed—any reference we make to promisedOne will have a single, fixed result.
It may not look like too much the way I’m using it here, but it’s powerful stuff—a pattern for asynchronously resolving anything. I’ve recently used Promises alongside a script that emulates Font Load Events, to apply webfonts asynchronously and avoid a potential performance hit. Font Face Observer allows us to, as the name implies, determine when the files referenced by our @font-face rules have finished loading.
var fontObserver = new FontFaceObserver( "Fancy Font" );
fontObserver.check().then(function() {
document.documentElement.className += " fonts-loaded";
}, function( error ) {
console.error( error );
});
fontObserver.check() gives us back a Promise, allowing us to chain on a then containing our callbacks for success and failure. We use the fulfilled callback to bolt a class onto the page once the font file has been fully transferred. We don’t bother including an argument in the first function, since we don’t care about the result itself so much as we care that the promise resolved without error—we’re not doing anything with the resolved value, just adding a class to the page. We do include the error argument, since we’ll want to know what happened should something go wrong.
Now, this isn’t the tidiest syntax around—at least to my eyes—with those two functions just kinda floating in a then. Luckily there’s an similar alternative syntax; one that I find a bit easier to parse at-a-glance:
fontObserver.check()
.then(function() {
document.documentElement.className += " fonts-loaded";
})
.catch(function( error ) {
console.log( error );
});
The first callback inside then provides us with our success state, while the catch provides us with a single, explicit “something went wrong” callback. The two syntaxes aren’t completely identical in all situations, but for a simple case like this, I find it a little neater.
The Common Thread
I guess I still owe you an explanation, huh. Not about the JavaScript-whatever; I think I’ve explained that plenty. No, I mean Fairytale of New York, and why it’s perched up there at the top of the four (4) song heap.
Fairytale is a sad song, ostensibly. If you follow the main thread—start to finish, line-by-line, step by step— Fairytale is a sad song. And I can see you out there, visions of Die Hard dancing in your heads: “but is it a Christmas song?”
Well, for my money, nothing says “holidays” quite like unreliable narration.
Shane MacGowan, the song’s author, has placed the first verse about “Christmas Eve in the drunk tank” as happening right after the “lucky one, came in eighteen-to-one”—not at the chronological end of the story. That means the song might not be mostly drunken flashback, but all of it a single, overarching flashback including a Christmas Eve in protective custody. It could be that the man and woman are, together, recounting times long past—good times and bad times—maybe not even in chronological order. Hell, the “NYPD Choir” mentioned in the chorus? There’s no such thing.
We’re not big Christmas folks, my family and I. But just the same, every year, the handful of us get together, and every year—like clockwork—there’s a lull in conversation, there’s a sharp exhale, and Ma says “we all made it.” Not to a house, not to a dinner, but through another year, to another Christmas. At this point, without fail, someone starts telling a story—and one begets another, and so on. Sometimes the stories are happy, sometimes they’re sad, more often than not they’re both. Some are about things we were lucky to walk away from, some are about a time when another one of us didn’t.
Start-to-finish, line-by-line, step-by-step, the main thread through the year doesn’t change, and maybe there isn’t a whole lot we can do to change it. But by carefully weaving our way in and out of that thread—stories all out of sync and resolving one way or the other, with the results determined by questionably reliable narrators—we can change the way we interact with it and, little by little, we can start making sense of it. |
2016 |
Mat Marquis |
matmarquis |
2016-12-19T00:00:00+00:00 |
https://24ways.org/2016/fairytale-of-new-promise/ |
code |
| 311 |
Designing Imaginative Style Guides |
(Living) style guides and (atomic) patterns libraries are “all the rage,” as my dear old Nana would’ve said. If articles and conference talks are to be believed, making and using them has become incredibly popular. I think there are plenty of ways we can improve how style guides look and make them better at communicating design information to creatives without it getting in the way of information that technical people need.
Guides to libraries of patterns
Most of my consulting work and a good deal of my creative projects now involve designing style guides. I’ve amassed a huge collection of brand guidelines and identity manuals as well as, more recently, guides to libraries of patterns intended to help designers and developers make digital products and websites.
Two pages from one of my Purposeful style guide packs. Designs © Stuff & Nonsense.
“Style guide” is an umbrella term for several types of design documentation. Sometimes we’re referring to static style or visual identity guides, other times voice and tone. We might mean front-end code guidelines or component/pattern libraries. These all offer something different but more often than not they have something in common. They look ugly enough to have been designed by someone who enjoys configuring a router.
OK, that was mean, not everyone’s going to think an unimaginative style guide design is a problem. After all, as long as a style guide contains information people need, how it looks shouldn’t matter, should it?
Inspiring not encyclopaedic
Well here’s the thing. Not everyone needs to take the same information away from a style guide. If you’re looking for markup and styles to code a ‘media’ component, you’re probably going to be the technical type, whereas if you need to understand the balance of sizes across a typographic hierarchy, you’re more likely to be a creative. What you need from a style guide is different.
Sure, some people1 need rules:
“Do this (responsive pattern)” or “don’t do that (auto-playing video.)”
Those people probably also want facts:
“Use this (hexadecimal value)” and not that inaccessible colour combination.”
Style guides need to do more than list facts and rules. They should demonstrate a design, not just document its parts. The best style guides are inspiring not encyclopaedic. I’ll explain by showing how many style guides currently present information about colour.
Colours communicate
I’m sure you’ll agree that alongside typography, colour’s one of the most important ingredients in a design. Colour communicates personality, creates mood and is vital to an easily understandable interactive vocabulary. So you’d think that an average style guide would describe all this in any number of imaginative ways. Well, you’d be disappointed, because the most inspiring you’ll find looks like a collection of chips from a paint chart.
Lonely Planet’s Rizzo does a great job of separating its Design Elements from UI Components, and while its ‘Click to copy’ colour values are a thoughtful touch, you’ll struggle to get a feeling for Lonely Planet’s design by looking at their colour chips.
Lonely Planet’s Rizzo style guide.
Lonely Planet approach is a common way to display colour information and it’s one that you’ll also find at Greenpeace, Sky, The Times and on countless more style guides.
Greenpeace, Sky and The Times style guides.
GOV.UK—not a website known for its creative flair—varies this approach by using circles, which I find strange as circles don’t feature anywhere else in its branding or design. On the plus side though, their designers have provided some context by categorising colours by usage such as text, links, backgrounds and more.
GOV.UK style guide.
Google’s Material Design offers an embarrassment of colours but most helpfully it also advises how to combine its primary and accent colours into usable palettes.
Google’s Material Design.
While the ability to copy colour values from a reference might be all a technical person needs, designers need to understand why particular colours were chosen as well as how to use them.
Inspiration not documentation
Few style guides offer any explanation and even less by way of inspiring examples. Most are extremely vague when they describe colour:
“Use colour as a presentation element for either decorative purposes or to convey information.”
The Government of Canada’s Web Experience Toolkit states, rather obviously.
“Certain colors have inherent meaning for a large majority of users, although we recognize that cultural differences are plentiful.”
Salesforce tell us, without actually mentioning any of those plentiful differences.
I’m also unsure what makes the Draft U.S. Web Design Standards colours a “distinctly American palette” but it will have to work extremely hard to achieve its goal of communicating “warmth and trustworthiness” now.
In Canada, “bold and vibrant” colours reflect Alberta’s “diverse landscape.”
Adding more colours to their palette has made Adobe “rich, dynamic, and multi-dimensional” and at Skype, colours are “bold, colourful (obviously) and confident” although their style guide doesn’t actually provide information on how to use them.
The University of Oxford, on the other hand, is much more helpful by explaining how and why to use their colours:
“The (dark) Oxford blue is used primarily in general page furniture such as the backgrounds on the header and footer. This makes for a strong brand presence throughout the site. Because it features so strongly in these areas, it is not recommended to use it in large areas elsewhere. However it is used more sparingly in smaller elements such as in event date icons and search/filtering bars.”
OpenTable style guide.
The designers at OpenTable have cleverly considered how to explain the hierarchy of their brand colours by presenting them and their supporting colours in various size chips. It’s also obvious from OpenTable’s design which colours are primary, supporting, accent or neutral without them having to say so.
Art directing style guides
For the style guides I design for my clients, I go beyond simply documenting their colour palette and type styles and describe visually what these mean for them and their brand. I work to find distinctive ways to present colour to better represent the brand and also to inspire designers.
For example, on a recent project for SunLife, I described their palette of colours and how to use them across a series of art directed pages that reflect the lively personality of the SunLife brand. Information about HEX and RGB values, Sass variables and when to use their colours for branding, interaction and messaging is all there, but in a format that can appeal to both creative and technical people.
SunLife style guide. Designs © Stuff & Nonsense.
Purposeful style guides
If you want to improve how you present colour information in your style guides, there’s plenty you can do.
For a start, you needn’t confine colour information to the palette page in your style guide. Find imaginative ways to display colour across several pages to show it in context with other parts of your design. Here are two CSS gradient filled ‘cover’ pages from my Purposeful style sheets.
Colour impacts other elements too, including typography, so make sure you include colour information on those pages, and vice-versa.
Purposeful. Designs © Stuff & Nonsense.
A visual hierarchy can be easier to understand than labelling colours as ‘primary,’ ‘supporting,’ or ‘accent,’ so find creative ways to present that hierarchy. You might use panels of different sizes or arrange boxes on a modular grid to fill a page with colour.
Don’t limit yourself to rectangular colour chips, use circles or other shapes created using only CSS. If irregular shapes are a part of your brand, fill SVG silhouettes with CSS and then wrap text around them using CSS shapes.
Purposeful. Designs © Stuff & Nonsense.
Summing up
In many ways I’m as frustrated with style guide design as I am with the general state of design on the web. Style guides and pattern libraries needn’t be dull in order to be functional. In fact, they’re the perfect place for you to try out new ideas and technologies. There’s nowhere better to experiment with new properties like CSS Grid than on your style guide.
The best style guide designs showcase new approaches and possibilities, and don’t simply document the old ones. Be as creative with your style guide designs as you are with any public-facing part of your website.
Purposeful are HTML and CSS style guides templates designed to help you develop creative style guides and pattern libraries for your business or clients. Save time while impressing your clients by using easily customisable HTML and CSS files that have been designed and coded to the highest standards. Twenty pages covering all common style guide components including colour, typography, buttons, form elements, and tables, plus popular pattern library components. Purposeful style guides will be available to buy online in January.
Boring people ↩ |
2016 |
Andy Clarke |
andyclarke |
2016-12-13T00:00:00+00:00 |
https://24ways.org/2016/designing-imaginative-style-guides/ |
design |
| 312 |
Preparing to Be Badass Next Year |
Once we’ve eaten our way through the holiday season, people will start to think about new year’s resolutions. We tend to focus on things that we want to change… and often things that we don’t like about ourselves to “fix”. We set rules for ourselves, or try to start new habits or stop bad ones. We focus in on things we will or won’t do.
For many of us the list of things we “ought” to be spending time on is just plain overwhelming – family, charity/community, career, money, health, relationships, personal development.
It’s kinda scary even just listing it out, isn’t it? I want to encourage you to think differently about next year.
The ever-brilliant Kathy Sierra articulates a better approach really well when talking about the attitude we should have to building great products. She tells us to think not about what the user will do with our product, but about what they are trying to achieve in the real world and how our product helps them to be badass1.
When we help the user be badass, then we are really making a difference.
I suppose this is one way of saying: focus not on what you will do, focus on what it will help you achieve. How will it help you be awesome?
In what ways do you want to be more badass next year?
A professional lens
Though of course you might want to focus in on health or family or charity or community or another area next year, many people will want to become more badass in their chosen career.
So let’s talk about a scaffold to help you figure out your professional / career development next year.
First up, an assumption: everyone wants to be awesome. Nobody gets up in the morning aiming to be crap at their job. Nobody thinks to themselves “Today I am aiming for just south of mediocre, and if I can mess up everybody else’s ability to do good work then that will be just perfect2”.
Ergo, you want to be awesome. So what does awesome look like?
Danger!
The big trap that people fall into when think about their professional development is to immediately focus on the things that they aren’t good at. When you ask people “what do you want to work on getting better at next year?” they frequently gravitate to the things that they believe they are bad at.
Why is this a trap? Because if you focus all your time and energy on improving the areas that you suck at, you are going to end up middling at everything. Going from bad → mediocre at a given skill / behaviour takes a bunch of time and energy. So if you spend all your time going from bad → mediocre at things, what do you think you end up? That’s right, mediocre.
Mediocrity is not a great career goal, kids.
What do you already rock at?
The much better investment of time and energy is to go from good → awesome. It often takes the same amount of relative time and energy, but wow the end result is better! So first, ask yourself and those who know you well what you are already pretty damn good at. Combat imposter syndrome by asking others.
Then figure out how to double down on those things. What does brilliant look like for a given skill? What’s the knowledge or practice that you need to level yourself up even further in that thing?
But what if I really really suck?
Admittedly, sometimes something you suck at really is holding you back. But it’s important to separate out weaknesses (just something you suck at) from controlling weaknesses (something you suck at that actually matters for your chosen career).
If skill x is just not an important thing for you to be good at, you may never need to care that you aren’t good at it. If your current role or the one you aspire to next really really requires you to be great at x, then it’s worth investing your time and energy (and possibly money too) getting better at it.
So when you look at the things that you aren’t good at, which of those are actually essential for success?
The right ratio
A good rule of thumb is to pick three things you are already good at to work on becoming awesome at and limit yourself to one weakness that you are trying to improve on. That way you are making sure that you get to awesome in areas where you already have an advantage, and limit the amount of time you are spending on going from bad → mediocre.
Levelling up learning
So once you’ve figured out your areas you want to focus on next year, what do you actually decide to do?
Most of all, you should try to design your day-to-day work in a way that it is also an effective learning experience. This means making sure you have a good feedback loop – you get to try something, see if it works, learn from it, rinse and repeat.
It’s also about balance: you want to be challenged enough for work to be interesting, without it being so hard it’s frustrating. You want to do similar / the same things often enough that you get to learn and improve, without it being so repetitive that it’s boring.
Continuously getting better at things you are already good at is actually both easier and harder than it sounds. The advantage is that it’s pretty easy to add the feedback loop to make sure that you are improving; the disadvantage is that you’re already good at these skills so you could easily just “do” without ever stopping to reflect and improve. Build in time for personal retrospectives (“What went well? What didn’t? What one thing will I choose to change next time?”) and find a way of getting feedback from outside sources as well.
As for the new skills, it’s worth knowing that skill development follows a particular pattern:
We all start out unconsciously incompetent (we don’t know what to do and if we tried we’d unwittingly get it wrong), progress on to conscious incompetence (we now know we’re doing it wrong) then conscious competence (we’re doing it right but wow it takes effort and attention) and eventually get to unconscious competence (automatically getting it right).
Your past experiences and knowledge might let you move faster through these stages, but no one gets to skip them. Invest the time and remember you need the feedback loop to really improve.
What about keeping up?
Everything changes very fast in our industry. We need to invest in not falling behind, in keeping on top of what great looks like. There are a bunch of ways to do this, from reading blog posts, following links on Twitter, reading books to attending conferences or workshops, or just finding time to build things in new ways or with new technologies.
Which will work best for you depends on how you best learn. Do you prefer to swallow a book? Do you learn most by building or experimenting?
Whatever your learning style though, remember that there are three real needs:
Scan the landscape (what’s changing, does it matter)
Gain the knowledge or skills (get the detail)
Apply the knowledge or skills (use it in reality)
When you remember that you need all three of these things it can help you get more of what you do.
For me personally, I use a combination of conferences and blogs / Twitter to scan the landscape. Half of what I want out of a conference is just a list of things to have on my radar that might become important. I then pick a couple of things to go read up on more (I personally learn most effectively by swallowing a book or spec or similar). And then I pick one thing at a time to actually apply in real life, to embed the skill / knowledge.
In summary
Aim to be awesome (mediocrity is not a career goal).
Figure out what you already rock at.
Only care about stuff you suck at that matters for your career.
Pick three things to go from good → awesome and one thing to go from bad → mediocre (or mediocre → good) this year.
Design learning into your daily work.
Scan the landscape, learn new stuff, apply it for real.
Be badass!
She wrote a whole book about it. You should read it: Badass: Making Users Awesome ↩
Before you argue too vehemently: I suppose some antisocial sociopathic bastards do exist. Identify them, and then RUN AWAY FAST AS YOU CAN #realtalk ↩ |
2016 |
Meri Williams |
meriwilliams |
2016-12-22T00:00:00+00:00 |
https://24ways.org/2016/preparing-to-be-badass-next-year/ |
business |
| 313 |
Centered Tabs with CSS |
Doug Bowman’s Sliding Doors is pretty much the de facto way to build tabbed navigation with CSS, and rightfully so – it is, as they say, rockin’ like Dokken. But since it relies heavily on floats for the positioning of its tabs, we’re constrained to either left- or right-hand navigation. But what if we need a bit more flexibility? What if we need to place our navigation in the center?
Styling the li as a floated block does give us a great deal of control over margin, padding, and other presentational styles. However, we should learn to love the inline box – with it, we can create a flexible, centered alternative to floated navigation lists.
Humble Beginnings
Do an extra shot of ‘nog, because you know what’s coming next. That’s right, a simple unordered list:
<div id="navigation">
<ul>
<li><a href="#"><span>Home</span></a></li>
<li><a href="#"><span>About</span></a></li>
<li><a href="#"><span>Our Work</span></a></li>
<li><a href="#"><span>Products</span></a></li>
<li class="last"><a href="#"><span>Contact Us</span></a></li>
</ul>
</div>
If we were wedded to using floats to style our list, we could easily fix the width of our ul, and trick it out with some margin: 0 auto; love to center it accordingly. But this wouldn’t net us much flexibility: if we ever changed the number of navigation items, or if the user increased her browser’s font size, our design could easily break.
Instead of worrying about floats, let’s take the most basic approach possible: let’s turn our list items into inline elements, and simply use text-align to center them within the ul:
#navigation ul, #navigation ul li {
list-style: none;
margin: 0;
padding: 0;
}
#navigation ul {
text-align: center;
}
#navigation ul li {
display: inline;
margin-right: .75em;
}
#navigation ul li.last {
margin-right: 0;
}
Our first step is sexy, no? Well, okay, not really – but it gives us a good starting point. We’ve tamed our list by removing its default styles, set the list items to display: inline, and centered the lot. Adding a background color to the links shows us exactly how the different elements are positioned.
Now the fun stuff.
Inline Elements, Padding, and You
So how do we give our links some dimensions? Well, as the CSS specification tells us, the height property isn’t an option for inline elements such as our anchors. However, what if we add some padding to them?
#navigation li a {
padding: 5px 1em;
}
I just love leading questions. Things are looking good, but something’s amiss: as you can see, the padded anchors seem to be escaping their containing list.
Thankfully, it’s easy to get things back in line. Our anchors have 5 pixels of padding on their top and bottom edges, right? Well, by applying the same vertical padding to the list, our list will finally “contain” its child elements once again.
’Tis the Season for Tabbing
Now, we’re finally able to follow the “Sliding Doors” model, and tack on some graphics:
#navigation ul li a {
background: url("tab-right.gif") no-repeat 100% 0;
color: #06C;
padding: 5px 0;
text-decoration: none;
}
#navigation ul li a span {
background: url("tab-left.gif") no-repeat;
padding: 5px 1em;
}
#navigation ul li a:hover span {
color: #69C;
text-decoration: underline;
}
Finally, our navigation’s looking appropriately sexy. By placing an equal amount of padding on the top and bottom of the ul, our tabs are properly “contained”, and we can subsequently style the links within them.
But what if we want them to bleed over the bottom-most border? Easy: we can simply decrease the bottom padding on the list by one pixel, like so.
A Special Note for Special Browsers
The Mac IE5 users in the audience are likely hopping up and down by now: as they’ve discovered, our centered navigation behaves rather annoyingly in their browser. As Philippe Wittenbergh has reported, Mac IE5 is known to create “phantom links” in a block-level element when text-align is set to any value but the default value of left. Thankfully, Philippe has documented a workaround that gets that [censored] venerable browser to behave. Simply place the following code into your CSS, and the links will be restored to their appropriate width:
/**//*/
#navigation ul li a {
display: inline-block;
white-space: nowrap;
width: 1px;
}
/**/
IE for Windows, however, displays an extra kind of crazy. The padding I’ve placed on my anchors is offsetting the spans that contain the left curve of my tabs; thankfully, these shenanigans are easily straightened out:
/**/
* html #navigation ul li a {
padding: 0;
}
/**/
And with that, we’re finally finished.
All set.
And that’s it. With your centered navigation in hand, you can finally enjoy those holiday toddies and uncomfortable conversations with your skeevy Uncle Eustace. |
2005 |
Ethan Marcotte |
ethanmarcotte |
2005-12-08T00:00:00+00:00 |
https://24ways.org/2005/centered-tabs-with-css/ |
code |
| 314 |
Easy Ajax with Prototype |
There’s little more impressive on the web today than a appropriate touch of Ajax. Used well, Ajax brings a web interface much closer to the experience of a desktop app, and can turn a bear of an task into a pleasurable activity.
But it’s really hard, right? It involves all the nasty JavaScript that no one ever does often enough to get really good at, and the browser support is patchy, and urgh it’s just so much damn effort. Well, the good news is that – ta-da – it doesn’t have to be a headache. But man does it still look impressive. Here’s how to amaze your friends.
Introducing prototype.js
Prototype is a JavaScript framework by Sam Stephenson designed to help make developing dynamic web apps a whole lot easier. In basic terms, it’s a JavaScript file which you link into your page that then enables you to do cool stuff.
There’s loads of capability built in, a portion of which covers our beloved Ajax. The whole thing is freely distributable under an MIT-style license, so it’s good to go. What a nice man that Mr Stephenson is – friends, let us raise a hearty cup of mulled wine to his good name. Cheers! sluurrrrp.
First step is to download the latest Prototype and put it somewhere safe. I suggest underneath the Christmas tree.
Cutting to the chase
Before I go on and set up an example of how to use this, let’s just get to the crux. Here’s how Prototype enables you to make a simple Ajax call and dump the results back to the page:
var url = 'myscript.php';
var pars = 'foo=bar';
var target = 'output-div';
var myAjax = new Ajax.Updater(target, url, {method: 'get', parameters: pars});
This snippet of JavaScript does a GET to myscript.php, with the parameter foo=bar, and when a result is returned, it places it inside the element with the ID output-div on your page.
Knocking up a basic example
So to get this show on the road, there are three files we need to set up in our site alongside prototype.js. Obviously we need a basic HTML page with prototype.js linked in. This is the page the user interacts with. Secondly, we need our own JavaScript file for the glue between the interface and the stuff Prototype is doing. Lastly, we need the page (a PHP script in my case) that the Ajax is going to make its call too.
So, to that basic HTML page for the user to interact with. Here’s one I found whilst out carol singing:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<title>Easy Ajax</title>
<script type="text/javascript" src="prototype.js"></script>
<script type="text/javascript" src="ajax.js"></script>
</head>
<body>
<form method="get" action="greeting.php" id="greeting-form">
<div>
<label for="greeting-name">Enter your name:</label>
<input id="greeting-name" type="text" />
<input id="greeting-submit" type="submit" value="Greet me!" />
</div>
<div id="greeting"></div>
</form>
</body>
</html>
As you can see, I’ve linked in prototype.js, and also a file called ajax.js, which is where we’ll be putting our glue. (Careful where you leave your glue, kids.)
Our basic example is just going to take a name and then echo it back in the form of a seasonal greeting. There’s a form with an input field for a name, and crucially a DIV (greeting) for the result of our call. You’ll also notice that the form has a submit button – this is so that it can function as a regular form when no JavaScript is available. It’s important not to get carried away and forget the basics of accessibility.
Meanwhile, back at the server
So we need a script at the server which is going to take input from the Ajax call and return some output. This is normally where you’d hook into a database and do whatever transaction you need to before returning a result. To keep this as simple as possible, all this example here will do is take the name the user has given and add it to a greeting message. Not exactly Web 2-point-HoHoHo, but there you have it.
Here’s a quick PHP script – greeting.php – that Santa brought me early.
<?php
$the_name = htmlspecialchars($_GET['greeting-name']);
echo "<p>Season's Greetings, $the_name!</p>";
?>
You’ll perhaps want to do something a little more complex within your own projects. Just sayin’.
Gluing it all together
Inside our ajax.js file, we need to hook this all together. We’re going to take advantage of some of the handy listener routines and such that Prototype also makes available. The first task is to attach a listener to set the scene once the window has loaded. He’s how we attach an onload event to the window object and get it to call a function named init():
Event.observe(window, 'load', init, false);
Now we create our init() function to do our evil bidding. Its first job of the day is to hide the submit button for those with JavaScript enabled. After that, it attaches a listener to watch for the user typing in the name field.
function init(){
$('greeting-submit').style.display = 'none';
Event.observe('greeting-name', 'keyup', greet, false);
}
As you can see, this is going to make a call to a function called greet() onkeyup in the greeting-name field. That function looks like this:
function greet(){
var url = 'greeting.php';
var pars = 'greeting-name='+escape($F('greeting-name'));
var target = 'greeting';
var myAjax = new Ajax.Updater(target, url, {method: 'get', parameters: pars});
}
The key points to note here are that any user input needs to be escaped before putting into the parameters so that it’s URL-ready. The target is the ID of the element on the page (a DIV in our case) which will be the recipient of the output from the Ajax call.
That’s it
No, seriously. That’s everything. Try the example. Amaze your friends with your 1337 Ajax sk1llz. |
2005 |
Drew McLellan |
drewmclellan |
2005-12-01T00:00:00+00:00 |
https://24ways.org/2005/easy-ajax-with-prototype/ |
code |
| 315 |
Edit-in-Place with Ajax |
Back on day one we looked at using the Prototype library to take all the hard work out of making a simple Ajax call. While that was fun and all, it didn’t go that far towards implementing something really practical. We dipped our toes in, but haven’t learned to swim yet.
So here is swimming lesson number one. Anyone who’s used Flickr to publish their photos will be familiar with the edit-in-place system used for quickly amending titles and descriptions on photographs. Hovering over an item turns its background yellow to indicate it is editable. A simple click loads the text into an edit box, right there on the page.
Prototype includes all sorts of useful methods to help reproduce something like this for our own projects. As well as the simple Ajax GETs we learned how to do last time, we can also do POSTs (which we’ll need here) and a whole bunch of manipulations to the user interface – all through simple library calls. Here’s what we’re building, so let’s do it.
Getting Started
There are two major components to this process; the user interface manipulation and the Ajax call itself. Our set-up is much the same as last time (you may wish to read the first article if you’ve not already done so). We have a basic HTML page which links in the prototype.js file and our own editinplace.js. Here’s what Santa dropped down my chimney:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
<title>Edit-in-Place with Ajax</title>
<link href="editinplace.css" rel="Stylesheet" type="text/css" />
<script src="prototype.js" type="text/javascript"></script>
<script src="editinplace.js" type="text/javascript"></script>
</head>
<body>
<h1>Edit-in-place</h1>
<p id="desc">Dashing through the snow on a one horse open sleigh.</p>
</body>
</html>
So that’s our page. The editable item is going to be the <p> called desc. The process goes something like this:
Highlight the area onMouseOver
Clear the highlight onMouseOut
If the user clicks, hide the area and replace with a <textarea> and buttons
Remove all of the above if the user cancels the operation
When the Save button is clicked, make an Ajax POST and show that something’s happening
When the Ajax call comes back, update the page with the new content
Events and Highlighting
The first step is to offer feedback to the user that the item is editable. This is done by shading the background colour when the user mouses over. Of course, the CSS :hover pseudo class is a straightforward way to do this, but for three reasons, I’m using JavaScript to switch class names.
:hover isn’t supported on many elements in Internet Explorer for Windows
I want to keep control over when the highlight switches off after an update, regardless of mouse position
If JavaScript isn’t available we don’t want to end up with the CSS suggesting it might be
With this in mind, here’s how editinplace.js starts:
Event.observe(window, 'load', init, false);
function init(){
makeEditable('desc');
}
function makeEditable(id){
Event.observe(id, 'click', function(){edit($(id))}, false);
Event.observe(id, 'mouseover', function(){showAsEditable($(id))}, false);
Event.observe(id, 'mouseout', function(){showAsEditable($(id), true)}, false);
}
function showAsEditable(obj, clear){
if (!clear){
Element.addClassName(obj, 'editable');
}else{
Element.removeClassName(obj, 'editable');
}
}
The first line attaches an onLoad event to the window, so that the function init() gets called once the page has loaded. In turn, init() sets up all the items on the page that we want to make editable. In this example I’ve just got one, but you can add as many as you like.
The function madeEditable() attaches the mouseover, mouseout and click events to the item we’re making editable. All showAsEditable does is add and remove the class name editable from the object. This uses the particularly cunning methods Element.addClassName() and Element.removeClassName() which enable you to cleanly add and remove effects without affecting any styling the object may otherwise have.
Oh, remember to add a rule for .editable to your style sheet:
.editable{
color: #000;
background-color: #ffffd3;
}
The Switch
As you can see above, when the user clicks on an editable item, a call is made to the function edit(). This is where we switch out the static item for a nice editable textarea. Here’s how that function looks.
function edit(obj){
Element.hide(obj);
var textarea ='<div id="' + obj.id + '_editor">
<textarea id="' + obj.id + '_edit" name="' + obj.id + '" rows="4" cols="60">'
+ obj.innerHTML + '</textarea>';
var button = '<input id="' + obj.id + '_save" type="button" value="SAVE" /> OR
<input id="' + obj.id + '_cancel" type="button" value="CANCEL" /></div>';
new Insertion.After(obj, textarea+button);
Event.observe(obj.id+'_save', 'click', function(){saveChanges(obj)}, false);
Event.observe(obj.id+'_cancel', 'click', function(){cleanUp(obj)}, false);
}
The first thing to do is to hide the object. Prototype comes to the rescue with Element.hide() (and of course, Element.show() too). Following that, we build up the textarea and buttons as a string, and then use Insertion.After() to place our new editor underneath the (now hidden) editable object.
The last thing to do before we leave the user to edit is it attach listeners to the Save and Cancel buttons to call either the saveChanges() function, or to cleanUp() after a cancel.
In the event of a cancel, we can clean up behind ourselves like so:
function cleanUp(obj, keepEditable){
Element.remove(obj.id+'_editor');
Element.show(obj);
if (!keepEditable) showAsEditable(obj, true);
}
Saving the Changes
This is where all the Ajax fun occurs. Whilst the previous article introduced Ajax.Updater() for simple Ajax calls, in this case we need a little bit more control over what happens once the response is received. For this purpose, Ajax.Request() is perfect. We can use the onSuccess and onFailure parameters to register functions to handle the response.
function saveChanges(obj){
var new_content = escape($F(obj.id+'_edit'));
obj.innerHTML = "Saving...";
cleanUp(obj, true);
var success = function(t){editComplete(t, obj);}
var failure = function(t){editFailed(t, obj);}
var url = 'edit.php';
var pars = 'id=' + obj.id + '&content=' + new_content;
var myAjax = new Ajax.Request(url, {method:'post',
postBody:pars, onSuccess:success, onFailure:failure});
}
function editComplete(t, obj){
obj.innerHTML = t.responseText;
showAsEditable(obj, true);
}
function editFailed(t, obj){
obj.innerHTML = 'Sorry, the update failed.';
cleanUp(obj);
}
As you can see, we first grab in the contents of the textarea into the variable new_content. We then remove the editor, set the content of the original object to “Saving…” to show that an update is occurring, and make the Ajax POST.
If the Ajax fails, editFailed() sets the contents of the object to “Sorry, the update failed.” Admittedly, that’s not a very helpful way to handle the error but I have to limit the scope of this article somewhere. It might be a good idea to stow away the original contents of the object (obj.preUpdate = obj.innerHTML) for later retrieval before setting the content to “Saving…”. No one likes a failure – especially a messy one.
If the Ajax call is successful, the server-side script returns the edited content, which we then place back inside the object from editComplete, and tidy up.
Meanwhile, back at the server
The missing piece of the puzzle is the server-side script for committing the changes to your database. Obviously, any solution I provide here is not going to fit your particular application. For the purposes of getting a functional demo going, here’s what I have in PHP.
<?php
$id = $_POST['id'];
$content = $_POST['content'];
echo htmlspecialchars($content);
?>
Not exactly rocket science is it? I’m just catching the content item from the POST and echoing it back. For your application to be useful, however, you’ll need to know exactly which record you should be updating. I’m passing in the ID of my <div>, which is not a fat lot of use. You can modify saveChanges() to post back whatever information your app needs to know in order to process the update.
You should also check the user’s credentials to make sure they have permission to edit whatever it is they’re editing. Basically the same rules apply as with any script in your application.
Limitations
There are a few bits and bobs that in an ideal world I would tidy up. The first is the error handling, as I’ve already mentioned. The second is that from an idealistic standpoint, I’d rather not be using innerHTML. However, the reality is that it’s presently the most efficient way of making large changes to the document. If you’re serving as XML, remember that you’ll need to replace these with proper DOM nodes.
It’s also important to note that it’s quite difficult to make something like this universally accessible. Whenever you start updating large chunks of a document based on user interaction, a lot of non-traditional devices don’t cope well. The benefit of this technique, though, is that if JavaScript is unavailable none of the functionality gets implemented at all – it fails silently. It is for this reason that this shouldn’t be used as a complete replacement for a traditional, universally accessible edit form. It’s a great time-saver for those with the ability to use it, but it’s no replacement.
See it in action
I’ve put together an example page using the inert PHP script above. That is to say, your edits aren’t committed to a database, so the example is reset when the page is reloaded. |
2005 |
Drew McLellan |
drewmclellan |
2005-12-23T00:00:00+00:00 |
https://24ways.org/2005/edit-in-place-with-ajax/ |
code |
| 316 |
Have Your DOM and Script It Too |
When working with the XMLHttpRequest object it appears you can only go one of three ways:
You can stay true to the colorful moniker du jour and stick strictly to the responseXML property
You can play with proprietary – yet widely supported – fire and inject the value of responseText property into the innerHTML of an element of your choosing
Or you can be eval() and parse JSON or arbitrary JavaScript delivered via responseText
But did you know that there’s a fourth option giving you the best of the latter two worlds? Mint uses this unmentioned approach to grab fresh HTML and run arbitrary JavaScript simultaneously. Without relying on eval(). “But wait-”, you might say, “when would I need to do this?” Besides the example below this technique is handy for things like tab groups that need initialization onload but miss the main onload event handler by a mile thanks to asynchronous scripting.
Consider the problem
Originally Mint used option 2 to refresh or load new tabs into individual Pepper panes without requiring a full roundtrip to the server. This was all well and good until I introduced the new Client Mode which when enabled allows anyone to view a Mint installation without being logged in. If voyeurs are afoot as Client Mode is disabled, the next time they refresh a pane the entire login page is inserted into the current document. That’s not very helpful so I needed a way to redirect the current document to the login page.
Enter the solution
Wouldn’t it be cool if browsers interpreted the contents of script tags crammed into innerHTML? Sure, but unfortunately, that just wasn’t meant to be. However like the body element, image elements have an onload event handler. When the image has fully loaded the handler runs the code applied to it. See where I’m going with this?
By tacking a tiny image (think single pixel, transparent spacer gif – shudder) onto the end of the HTML returned by our Ajax call, we can smuggle our arbitrary JavaScript into the existing document. The image is added to the DOM, and our stowaway can go to town.
<p>This is the results of our Ajax call.</p>
<img src="../images/loaded.gif" alt="" onload="alert('Now that I have your attention...');" />
Please be neat
So we’ve just jammed some meaningless cruft into our DOM. If our script does anything with images this addition could have some unexpected side effects. (Remember The Fly?) So in order to save that poor, unsuspecting element whose innerHTML we just swapped out from sharing Jeff Goldblum’s terrible fate we should tidy up after ourselves. And by using the removeChild method we do just that.
<p>This is the results of our Ajax call.</p>
<img src="../images/loaded.gif" alt=""
onload="alert('Now that I have your attention...');this.parentNode.removeChild(this);" /> |
2005 |
Shaun Inman |
shauninman |
2005-12-24T00:00:00+00:00 |
https://24ways.org/2005/have-your-dom-and-script-it-too/ |
code |
| 317 |
Putting the World into "World Wide Web" |
Despite the fact that the Web has been international in scope from its inception, the predominant mass of Web sites are written in English or another left-to-right language. Sites are typically designed visually for Western culture, and rely on an enormous body of practices for usability, information architecture and interaction design that are by and large centric to the Western world.
There are certainly many reasons this is true, but as more and more Web sites realize the benefits of bringing their products and services to diverse, global markets, the more demand there will be on Web designers and developers to understand how to put the World into World Wide Web.
Internationalization
According to the W3C, Internationalization is:
“…the design and development of a product, application or document content that enables easy localization for target audiences that vary in culture, region, or language.”
Many Web designers and developers have at least heard, if not read, about Internationalization. We understand that the Web is in fact worldwide, but many of us never have the opportunity to work with Internationalization. Or, when we do, think of it in purely technical terms, such as “which character set do I use?”
At first glance, it might seem to many that Internationalization is the act of making Web sites available to international audiences. And while that is in fact true, this isn’t done by broad-stroking techniques and technologies. Instead, it involves a far more narrow understanding of geographical, cultural and linguistic differences in specific areas of the world. This is referred to as localization and is the act of making a Web site make sense in the context of the region, culture and language(s) the people using the site are most familiar with.
Internationalization itself includes the following technical tasks:
Ensuring no barrier exists to the localization of sites. Of critical importance in the planning stages of a site for Internationalized audiences, the role of the developer is to ensure that no barrier exists. This means being able to perform such tasks as enabling Unicode and making sure legacy character encodings are properly handled.
Preparing markup and CSS with Internationalization in mind. The earlier in the site development process this occurs, the better. Issues such as ensuring that you can support bidirectional text, identifying language, and using CSS to support non-Latin typographic features.
Enabling code to support local, regional, language or culturally related references. Examples in this category would include time/date formats, localization of calendars, numbering systems, sorting of lists and managing international forms of addresses.
Empowering the user. Sites must be architected so the user can easily choose or implement the localized alternative most appropriate to them.
Localization
According to the W3C, Localization is the:
…adaptation of a product, application or document content to meet the language, cultural and other requirements of a specific target market (a “locale”).
So here’s where we get down to thinking about the more sociological and anthropological concerns. Some of the primary localization issues are:
Numeric formats. Different languages and cultures use numbering systems unlike ours. So, any time we need to use numbers, such as in an ordered list, we have to have a means of representing the accurate numbering system for the locale in question.
Money, honey! That’s right. I’ve got a pocketful of ugly U.S. dollars (why is U.S. money so unimaginative?). But I also have a drawer full of Japanese Yen, Australian Dollars, and Great British Pounds. Currency, how it’s calculated and how it’s represented is always a consideration when dealing with localization.
Using symbols, icons and colors properly. Using certain symbols or icons on sites where they might offend or confuse is certainly not in the best interest of a site that wants to sell or promote a product, service or information type. Moreover, the colors we use are surprisingly persuasive – or detrimental. Think about colors that represent death, for example. In many parts of Asia, white is the color of death. In most of the Western world, black represents death. For Catholic Europe, shades of purple (especially lavender) have represented Christ on the cross and mourning since at least Victorian times. When Walt Disney World Europe launched an ad campaign using a lot of purple and very glitzy imagery, millions of dollars were lost as a result of this seeming subtle issue. Instead of experiencing joy and celebration at the ads, the European audience, particularly the French, found the marketing to be overly American, aggressive, depressing and basically unappealing. Along with this and other cultural blunders, Disney Europe has become a well-known case study for businesses wishing to become international. By failing to understand localization differences, and how powerful color and imagery act on the human psyche, designers and developers are put to more of a disadvantage when attempting to communicate with a given culture.
Choosing appropriate references to objects and ideas. What seems perfectly natural in one culture in terms of visual objects and ideas can get confused in another environment. One of my favorite cases of this has to do with Gerber baby food. In the U.S., the baby food is marketed using a cute baby on the package. Most people in the U.S. culturally do not make an immediate association that what is being represented on the label is what is inside the container. However, when Gerber expanded to Africa, where many people don’t read, and where visual associations are less abstract, people made the inference that a baby on the cover of a jar of food represented what is in fact in the jar. You can imagine how confused and even angry people became. Using such approaches as a marketing ploy in the wrong locale can and will render the marketing a failure.
As you can see, the act of localization is one that can have profound impact on the success of a business or organization as it seeks to become available to more and more people across the globe.
Rethinking Design in the Context of Culture
While well-educated designers and those individuals working specifically for companies that do a lot of localization understand these nuances, most of us don’t get exposed to these ideas. Yet, we begin to see how necessary it becomes to have an awareness of not just the technical aspects of Internationalization, but the socio-cultural ones within localization.
What’s more, the bulk of information we have when it comes to designing sites typically comes from studies and work done on sites built in English and promoted to Western culture at large. We’re making a critical mistake by not including diverse languages and cultural issues within our usability and information architecture studies.
Consider the following design from the BBC:
In this case, we’re dealing with English, which is read left to right. We are also dealing with U.K. cultural norms. Notice the following:
Location of of navigation
Use of the color red
Use of diverse symbols
Mix of symbols, icons and photos
Location of Search
Now look at this design, which is the Arabic version of the BBC News, read right to left, and dealing with cultural norms within the Arabic-speaking world.
Notice the following:
Location of of navigation (location switches to the right)
Use of the color blue (blue is considered the “safest” global color)
No use of symbols and icons whatsoever
Limitation of imagery to photos
In most cases, the photos show people, not objects
Location of Search
Admittedly, some choices here are more obvious than others in terms of why they were made. But one thing that stands out is that the placement of search is the same for both versions. Is this the result of a specific localization decision, or based on what we believe about usability at large? This is exactly the kind of question that designers working on localization have to seek answers to, instead of relying on popular best practices and belief systems that exist for English-only Web sites.
It’s a Wide World Web After All
From this brief article on Internationalization, it becomes apparent that the art and science of creating sites for global audiences requires a lot more preparation and planning than one might think at first glance. Developers and designers not working to address these issues specifically due to time or awareness will do well to at least understand the basic process of making sites more culturally savvy, and better prepared for any future global expansion.
One thing is certain: We not only are on a dramatic learning curve for designing and developing Web sites as it is, the need to localize sites is going to become more and more a part of the day to day work. Understanding aspects of what makes a site international and local will not only help you expand your skill set and make you more marketable, but it will also expand your understanding of the world and the people within it, how they relate to and use the Web, and how you can help make their experience the best one possible. |
2005 |
Molly Holzschlag |
mollyholzschlag |
2005-12-09T00:00:00+00:00 |
https://24ways.org/2005/putting-the-world-into-world-wide-web/ |
ux |
| 318 |
Auto-Selecting Navigation |
In the article Centered Tabs with CSS Ethan laid out a tabbed navigation system which can be centred on the page. A frequent requirement for any tab-based navigation is to be able to visually represent the currently selected tab in some way.
If you’re using a server-side language such as PHP, it’s quite easy to write something like class="selected" into your markup, but it can be even simpler than that.
Let’s take the navigation div from Ethan’s article as an example.
<div id="navigation">
<ul>
<li><a href="#"><span>Home</span></a></li>
<li><a href="#"><span>About</span></a></li>
<li><a href="#"><span>Our Work</span></a></li>
<li><a href="#"><span>Products</span></a></li>
<li class="last"><a href="#"><span>Contact Us</span></a></li>
</ul>
</div>
As you can see we have a standard unordered list which is then styled with CSS to look like tabs. By giving each tab a class which describes it’s logical section of the site, if we were to then apply a class to the body tag of each page showing the same, we could write a clever CSS selector to highlight the correct tab on any given page.
Sound complicated? Well, it’s not a trivial concept, but actually applying it is dead simple.
Modifying the markup
First thing is to place a class name on each li in the list:
<div id="navigation">
<ul>
<li class="home"><a href="#"><span>Home</span></a></li>
<li class="about"><a href="#"><span>About</span></a></li>
<li class="work"><a href="#"><span>Our Work</span></a></li>
<li class="products"><a href="#"><span>Products</span></a></li>
<li class="last contact"><a href="#"><span>Contact Us</span></a></li>
</ul>
</div>
Then, on each page of your site, apply the a matching class to the body tag to indicate which section of the site that page is in. For example, on your About page:
<body class="about">...</body>
Writing the CSS selector
You can now write a single CSS rule to match the selected tab on any given page. The logic is that you want to match the ‘about’ tab on the ‘about’ page and the ‘products’ tab on the ‘products’ page, so the selector looks like this:
body.home #navigation li.home,
body.about #navigation li.about,
body.work #navigation li.work,
body.products #navigation li.products,
body.contact #navigation li.contact{
... whatever styles you need to show the tab selected ...
}
So all you need to do when you create a new page in your site is to apply a class to the body tag to say which section it’s in. The CSS will do the rest for you – without any server-side help. |
2005 |
Drew McLellan |
drewmclellan |
2005-12-10T00:00:00+00:00 |
https://24ways.org/2005/auto-selecting-navigation/ |
code |
| 319 |
Avoiding CSS Hacks for Internet Explorer |
Back in October, IEBlog issued a call to action, asking developers to clean up their CSS hacks for IE7 testing. Needless to say, a lot of hubbub ensued… both on IEBlog and elsewhere. My contribution to all of the noise was to suggest that developers review their code and use good CSS hacks. But what makes a good hack?
Tantek Çelik, the Godfather of CSS hacks, gave us the answer by explaining how CSS hacks should be designed. In short, they should (1) be valid, (2) target only old/frozen/abandoned user-agents/browsers, and (3) be ugly. Tantek also went on to explain that using a feature of CSS is not a hack.
Now, I’m not a frequent user of CSS hacks, but Tantek’s post made sense to me. In particular, I felt it gave developers direction on how we should be coding to accommodate that sometimes troublesome browser, Internet Explorer. But what I’ve found, through my work with other developers, is that there is still much confusion over the use of CSS hacks and IE. Using examples from the code I’ve seen recently, allow me to demonstrate how to clean up some IE-specific CSS hacks.
The two hacks that I’ve found most often in the code I’ve seen and worked with are the star html bug and the underscore hack. We know these are both IE-specific by checking Kevin Smith’s CSS Filters chart. Let’s look at each of these hacks and see how we can replace them with the same CSS feature-based solution.
The star html bug
This hack violates Tantek’s second rule as it targets current (and future) UAs. I’ve seen this both as a stand alone rule, as well as an override to some other rule in a style sheet. Here are some code samples:
* html div#header {margin-top:-3px;}
.promo h3 {min-height:21px;}
* html .promo h3 {height:21px;}
The underscore hack
This hack violates Tantek’s first two rules: it’s invalid (according to the W3C CSS Validator) and it targets current UAs. Here’s an example:
ol {padding:0; _padding-left:5px;}
Using child selectors
We can use the child selector to replace both the star html bug and underscore hack. Here’s how:
Write rules with selectors that would be successfully applied to all browsers. This may mean starting with no declarations in your rule!
div#header {}
.promo h3 {}
ol {padding:0;}
To these rules, add the IE-specific declarations.
div#header {margin-top:-3px;}
.promo h3 {height:21px;}
ol {padding:0 0 0 5px;}
After each rule, add a second rule. The selector of the second rule must use a child selector. In this new rule, correct any IE-specific declarations previously made.
div#header {margin-top:-3px;}
body > div#header {margin-top:0;}
.promo h3 {height:21px;}
.promo > h3 {height:auto; min-height:21px;}
ol {padding:0 0 0 5px;}
html > body ol {padding:0;}
Voilà – no more hacks! There are a few caveats to this that I won’t go into… but assuming you’re operating in strict mode and barring any really complicated stuff you’re doing in your code, your CSS will still render perfectly across browsers. And while this may make your CSS slightly heftier in size, it should future-proof it for IE7 (or so I hope). Happy holidays! |
2005 |
Kimberly Blessing |
kimberlyblessing |
2005-12-17T00:00:00+00:00 |
https://24ways.org/2005/avoiding-css-hacks-for-internet-explorer/ |
code |
| 320 |
DOM Scripting Your Way to Better Blockquotes |
Block quotes are great. I don’t mean they’re great for indenting content – that would be an abuse of the browser’s default styling. I mean they’re great for semantically marking up a chunk of text that is being quoted verbatim. They’re especially useful in blog posts.
<blockquote>
<p>Progressive Enhancement, as a label for a strategy for Web design,
was coined by Steven Champeon in a series of articles and presentations
for Webmonkey and the SxSW Interactive conference.</p>
</blockquote>
Notice that you can’t just put the quoted text directly between the <blockquote> tags. In order for your markup to be valid, block quotes may only contain block-level elements such as paragraphs.
There is an optional cite attribute that you can place in the opening <blockquote> tag. This should contain a URL containing the original text you are quoting:
<blockquote cite="http://en.wikipedia.org/wiki/Progressive_Enhancement">
<p>Progressive Enhancement, as a label for a strategy for Web design,
was coined by Steven Champeon in a series of articles and presentations
for Webmonkey and the SxSW Interactive conference.</p>
</blockquote>
Great! Except… the default behavior in most browsers is to completely ignore the cite attribute. Even though it contains important and useful information, the URL in the cite attribute is hidden.
You could simply duplicate the information with a hyperlink at the end of the quoted text:
<blockquote cite="http://en.wikipedia.org/wiki/Progressive_Enhancement">
<p>Progressive Enhancement, as a label for a strategy for Web design,
was coined by Steven Champeon in a series of articles and presentations
for Webmonkey and the SxSW Interactive conference.</p>
<p class="attribution">
<a href="http://en.wikipedia.org/wiki/Progressive_Enhancement">source</a>
</p>
</blockquote>
But somehow it feels wrong to have to write out the same URL twice every time you want to quote something. It could also get very tedious if you have a lot of quotes.
Well, “tedious” is no problem to a programming language, so why not use a sprinkling of DOM Scripting? Here’s a plan for generating an attribution link for every block quote with a cite attribute:
Write a function called prepareBlockquotes.
Begin by making sure the browser understands the methods you will be using.
Get all the blockquote elements in the document.
Start looping through each one.
Get the value of the cite attribute.
If the value is empty, continue on to the next iteration of the loop.
Create a paragraph.
Create a link.
Give the paragraph a class of “attribution”.
Give the link an href attribute with the value from the cite attribute.
Place the text “source” inside the link.
Place the link inside the paragraph.
Place the paragraph inside the block quote.
Close the for loop.
Close the function.
Here’s how that translates to JavaScript:
function prepareBlockquotes() {
if (!document.getElementsByTagName || !document.createElement || !document.appendChild) return;
var quotes = document.getElementsByTagName("blockquote");
for (var i=0; i<quotes.length; i++) {
var source = quotes[i].getAttribute("cite");
if (!source) continue;
var para = document.createElement("p");
var link = document.createElement("a");
para.className = "attribution";
link.setAttribute("href",source);
link.appendChild(document.createTextNode("source"));
para.appendChild(link);
quotes[i].appendChild(para);
}
}
Now all you need to do is trigger that function when the document has loaded:
window.onload = prepareBlockquotes;
Better yet, use Simon Willison’s handy addLoadEvent function to queue this function up with any others you might want to execute when the page loads.
That’s it. All you need to do is save this function in a JavaScript file and reference that file from the head of your document using <script> tags.
You can style the attribution link using CSS. It might look good aligned to the right with a smaller font size.
If you’re looking for something to do to keep you busy this Christmas, I’m sure that this function could be greatly improved. Here are a few ideas to get you started:
Should the text inside the generated link be the URL itself?
If the block quote has a title attribute, how would you take its value and use it as the text inside the generated link?
Should the attribution paragraph be placed outside the block quote? If so, how would you that (remember, there is an insertBefore method but no insertAfter)?
Can you think of other instances of useful information that’s locked away inside attributes? Access keys? Abbreviations? |
2005 |
Jeremy Keith |
jeremykeith |
2005-12-05T00:00:00+00:00 |
https://24ways.org/2005/dom-scripting-your-way-to-better-blockquotes/ |
code |
| 321 |
Tables with Style |
It might not seem like it but styling tabular data can be a lot of fun. From a semantic point of view, there are plenty of elements to tie some style into. You have cells, rows, row groups and, of course, the table element itself. Adding CSS to a paragraph just isn’t as exciting.
Where do I start?
First, if you have some tabular data (you know, like a spreadsheet with rows and columns) that you’d like to spiffy up, pop it into a table — it’s rightful place!
To add more semantics to your table — and coincidentally to add more hooks for CSS — break up your table into row groups. There are three types of row groups: the header (thead), the body (tbody) and the footer (tfoot). You can only have one header and one footer but you can have as many table bodies as is appropriate.
Sample table example
Inspiration
Table Striping
To improve scanning information within a table, a common technique is to style alternating rows. Also known as zebra tables. Whether you apply it using a class on every other row or turn to JavaScript to accomplish the task, a handy-dandy trick is to use a semi-transparent PNG as your background image. This is especially useful over patterned backgrounds.
tbody tr.odd td {
background:transparent url(background.png) repeat top left;
}
* html tbody tr.odd td {
background:#C00;
filter: progid:DXImageTransform.Microsoft.AlphaImageLoader(
src='background.png', sizingMethod='scale');
}
We turn off the default background and apply our PNG hack to have this work in Internet Explorer.
Styling Columns
Did you know you could style a column? That’s right. You can add special column (col) or column group (colgroup) elements. With that you can add border or background styles to the column.
<table>
<col id="ingredients">
<col id="serve12">
<col id="serve24">
...
Check out the example.
Fun with Backgrounds
Pop in a tiled background to give your table some character! Internet Explorer’s PNG hack unfortunately only works well when applied to a cell.
To figure out which background will appear over another, just remember the hierarchy:
(bottom) Table → Column → Row Group → Row → Cell (top)
The Future is Bright
Once browser-makers start implementing CSS3, we’ll have more power at our disposal. Just with :first-child and :last-child, you can pull off a scalable version of our previous table with rounded corners and all — unfortunately, only Firefox manages to pull this one off successfully. And the selector the masses are clamouring for, nth-child, will make zebra tables easy as eggnog. |
2005 |
Jonathan Snook |
jonathansnook |
2005-12-19T00:00:00+00:00 |
https://24ways.org/2005/tables-with-style/ |
code |
| 322 |
Introduction to Scriptaculous Effects |
Gather around kids, because this year, much like in that James Bond movie with Denise Richards, Christmas is coming early… in the shape of scrumptuous smooth javascript driven effects at your every whim.
Now what I’m going to do, is take things down a notch. Which is to say, you don’t need to know much beyond how to open a text file and edit it to follow this article. Personally, I for instance can’t code to save my life.
Well, strictly speaking, that’s not entirely true. If my life was on the line, and the code needed was really simple and I wasn’t under any time constraints, then yeah maybe I could hack my way out of it
But my point is this: I’m not a programmer in the traditional sense of the word. In fact, what I do best, is scrounge code off of other people, take it apart and then put it back together with duct tape, chewing gum and dumb blind luck.
No, don’t run! That happens to be a good thing in this case. You see, we’re going to be implementing some really snazzy effects (which are considerably more relevant than most people are willing to admit) on your site, and we’re going to do it with the aid of Thomas Fuchs’ amazing Script.aculo.us library. And it will be like stealing candy from a child.
What Are We Doing?
I’m going to show you the very basics of implementing the Script.aculo.us javascript library’s Combination Effects. These allow you to fade elements on your site in or out, slide them up and down and so on.
Why Use Effects at All?
Before get started though, let me just take a moment to explain how I came to see smooth transitions as something more than smoke and mirror-like effects included for with little more motive than to dazzle and make parents go ‘uuh, snazzy’.
Earlier this year, I had the good fortune of meeting the kind, gentle and quite knowledgable Matt Webb at a conference here in Copenhagen where we were both speaking (though I will be the first to admit my little talk on Open Source Design was vastly inferior to Matt’s talk). Matt held a talk called Fixing Broken Windows (based on the Broken Windows theory), which really made an impression on me, and which I have since then referred back to several times.
You can listen to it yourself, as it’s available from Archive.org. Though since Matt’s session uses many visual examples, you’ll have to rely on your imagination for some of the examples he runs through during it. Also, I think it looses audio for a few seconds every once in a while.
Anyway, one of the things Matt talked a lot about, was how our eyes are wired to react to movement. The world doesn’t flickr. It doesn’t disappear or suddenly change and force us to look for the change. Things move smoothly in the real world. They do not pop up.
How it Works
Once the necessary files have been included, you trigger an effect by pointing it at the ID of an element. Simple as that.
Implementing the Effects
So now you know why I believe these effects have a place in your site, and that’s half the battle. Because you see, actually getting these effects up and running, is deceptively simple.
First, go and download the latest version of the library (as of this writing, it’s version 1.5 rc5). Unzip itand open it up.
Now we’re going to bypass the instructions in the readme file. Script.aculo.us can do a bunch of quite advanced things, but all we really want from it is its effects. And by sidestepping the rest of the features, we can shave off roughly 80KB of unnecessary javascript, which is well worth it if you ask me.
As with Drew’s article on Easy Ajax with Prototype, script.aculo.us also uses the Prototype framework by Sam Stephenson. But contrary to Drew’s article, you don’t have to download Prototype, as a version comes bundled with script.aculo.us (though feel free to upgrade to the latest version if you so please).
So in the unzipped folder, containing the script.aculo.us files and folder, go into ‘lib’ and grab the ‘prototype.js’ file. Move it to whereever you want to store the javascript files. Then fetch the ‘effects.js’ file from the ‘src’ folder and put it in the same place.
To make things even easier for you to get this up and running, I have prepared a small javascript snippet which does some checking to see what you’re trying to do. The script.aculo.us effects are all either ‘turn this off’ or ‘turn this on’. What this snippet does, is check to see what state the target currently has (is it on or off?) and then use the necessary effect.
You can either skip to the end and download the example code, or copy and paste this code into a file manually (I’ll refer to that file as combo.js):
Effect.OpenUp = function(element) {
element = $(element);
new Effect.BlindDown(element, arguments[1] || {});
}
Effect.CloseDown = function(element) {
element = $(element);
new Effect.BlindUp(element, arguments[1] || {});
}
Effect.Combo = function(element) {
element = $(element);
if(element.style.display == 'none') {
new Effect.OpenUp(element, arguments[1] || {});
}else {
new Effect.CloseDown(element, arguments[1] || {});
}
}
Currently, this code uses the BlindUp and BlindDown code, which I personally like, but there’s nothing wrong with you changing the effect-type into one of the other effects available.
Now, include the three files in the header of your code, like so:
<script src="prototype.js" type="text/javascript"></script>
<script src="effects.js" type="text/javascript"></script>
<script src="combo.js" type="text/javascript"></script>
Now insert the element you want to use the effect on, like so:
<div id="content" style="display: none;">Lorem ipsum dolor sit amet.</div>
The above element will start out invisible, and when triggered will be revealed. If you want it to start visible, simply remove the style parameter.
And now for the trigger
<a href="javascript:Effect.Combo('content');">Click Here</a>
And that, is pretty much it. Clicking the link should unfold the DIV targeted by the effect, in this case ‘content’.
Effect Options
Now, it gets a bit long-haired though. The documentation for script.aculo.us is next to non-existing, and because of that you’ll have to do some digging yourself to appreciate the full potentialof these effects.
First of all, what kind of effects are available? Well you can go to the demo page and check them out, or you can open the ‘effects.js’ file and have a look around, something I recommend doing regardlessly, to gain an overview of what exactly you’re dealing with.
If you dissect it for long enough, you can even distill some of the options available for the various effects. In the case of the BlindUp and BlindDown effect, which we’re using in our example (as triggered from combo.js), one of the things that would be interesting to play with would be the duration of the effect. If it’s too long, it will feel slow and unresponsive. Too fast and it will be imperceptible.
You set the options like so:
<a href="javascript:Effect.Combo('content', {duration: .2});">Click Here</a>
The change from the previous link being the inclusion of , {duration: .2}. In this case, I have lowered the duration to 0.2 second, to really make it feel snappy.
You can also go all-out and turn on all the bells and whistles of the Blind effect like so (slowed down to a duration of three seconds so you can see what’s going on):
<a href="javascript:Effect.Combo('content', {duration: 3, scaleX: true, scaleContent: true});">Click Here</a>
Conclusion
And that’s pretty much it. The rest is a matter of getting to know the rest of the effects and their options as well as finding out just when and where to use them. Remember the ancient Chinese saying: Less is more.
Download Example
I have prepared a very basic example, which you can download and use as a reference point. |
2005 |
Michael Heilemann |
michaelheilemann |
2005-12-12T00:00:00+00:00 |
https://24ways.org/2005/introduction-to-scriptaculous-effects/ |
code |
| 323 |
Introducing UDASSS! |
Okay. What’s that mean?
Unobtrusive Degradable Ajax Style Sheet Switcher!
Boy are you in for treat today ‘cause we’re gonna have a whole lotta Ajaxifida Unobtrucitosity CSS swappin’ Fun!
Okay are you really kidding? Nope. I’ve even impressed myself on this one. Unfortunately, I don’t have much time to tell you the ins and outs of what I actually did to get this to work. We’re talking JavaScript, CSS, PHP…Ajax. But don’t worry about that. I’ve always believed that a good A.P.I. is an invisible A.P.I… and this I felt I achieved. The only thing you need to know is how it works and what to do.
A Quick Introduction Anyway…
First of all, the idea is very simple. I wanted something just like what Paul Sowden put together in
Alternative Style: Working With Alternate Style Sheets from Alistapart Magazine EXCEPT a few minor (not-so-minor actually) differences which I’ve listed briefly below:
Allow users to switch styles without JavaScript enabled (degradable)
Preventing the F.O.U.C. before the window ‘load’ when getting preferred styles
Keep the JavaScript entirely off our markup (no onclick’s or onload’s)
Make it very very easy to implement (ok, Paul did that too)
What I did to achieve this was used server-side cookies instead of JavaScript cookies. Hence, PHP. However this isn’t a “PHP style switcher” – which is where Ajax comes in. For the extreme technical folks, no, there is no xml involved here, or even a callback response. I only say Ajax because everyone knows what ‘it’ means. With that said, it’s the Ajax that sets the cookies ‘on the fly’. Got it? Awesome!
What you need
Luckily, I’ve done the work for you. It’s all packaged up in a nice zip file (at the end…keep reading for now) – so from here on out,
just follow these instructions
As I’ve mentioned, one of the things we’ll be working with is PHP. So, first things first, open up a file called index and save it with a ‘.php’ extension.
Next, place the following text at the top of your document (even above your DOCTYPE)
<?php
require_once('utils/style-switcher.php');
// style sheet path[, media, title, bool(set as alternate)]
$styleSheet = new AlternateStyles();
$styleSheet->add('css/global.css','screen,projection'); // [Global Styles]
$styleSheet->add('css/preferred.css','screen,projection','Wog Standard'); // [Preferred Styles]
$styleSheet->add('css/alternate.css','screen,projection','Tiny Fonts',true); // [Alternate Styles]
$styleSheet->add('css/alternate2.css','screen,projection','Big O Fonts',true); // // [Alternate Styles]
$styleSheet->getPreferredStyles();
?>
The way this works is REALLY EASY. Pay attention closely.
Notice in the first line we’ve included our style-switcher.php file.
Next we instantiate a PHP class called AlternateStyles() which will allow us to configure our style sheets.
So for kicks, let’s just call our object $styleSheet
As part of the AlternateStyles object, there lies a public method called add. So naturally with our $styleSheet object, we can call it to (da – da-da-da!) Add Style Sheets!
How the add() method works
The add method takes in a possible four arguments, only one is required. However, you’ll want to add some… since the whole point is working with alternate style sheets.
$path can simply be a uri, absolute, or relative path to your style sheet. $media adds a media attribute to your style sheets. $title gives a name to your style sheets (via title attribute).$alternate (which shows boolean) simply tells us that these are the alternate style sheets.
add() Tips
For all global style sheets (meaning the ones that will always be seen and will not be swapped out), simply use the add method as shown next to // [Global Styles].
To add preferred styles, do the same, but add a ‘title’.
To add the alternate styles, do the same as what we’ve done to add preferred styles, but add the extra boolean and set it to true.
Note following when adding style sheets
Multiple global style sheets are allowed
You can only have one preferred style sheet (That’s a browser rule)
Feel free to add as many alternate style sheets as you like
Moving on
Simply add the following snippet to the <head> of your web document:
<script type="text/javascript" src="js/prototype.js"></script>
<script type="text/javascript" src="js/common.js"></script>
<script type="text/javascript" src="js/alternateStyles.js"></script>
<?php
$styleSheet->drop();
?>
Nothing much to explain here. Just use your copy & paste powers.
How to Switch Styles
Whether you knew it or not, this baby already has the built in ‘ubobtrusive’ functionality that lets you switch styles by the drop of any link with a class name of ‘altCss‘. Just drop them where ever you like in your document as follows:
<a class="altCss" href="index.php?css=Bog_Standard">Bog Standard</a>
<a class="altCss" href="index.php?css=Really_Small_Fonts">Small Fonts</a>
<a class="altCss" href="index.php?css=Large_Fonts">Large Fonts</a>
Take special note where the file is linking to. Yep. Just linking right back to the page we’re on. The only extra parameters we pass in is a variable called ‘css’ – and within that we append the names of our style sheets.
Also take very special note on the names of the style sheets have an under_score to take place of any spaces we might have.
Go ahead… play around and change the style sheet on the example page. Try disabling JavaScript and refreshing your browser. Still works!
Cool eh?
Well, I put this together in one night so it’s still a work in progress and very beta. If you’d like to hear more about it and its future development, be sure stop on by my site where I’ll definitely be maintaining it.
Download the beta anyway
Well this wouldn’t be fun if there was nothing to download. So we’re hooking you up so you don’t go home (or logoff) unhappy
Download U.D.A.S.S.S | V0.8
Merry Christmas!
Thanks for listening and I hope U.D.A.S.S.S. has been well worth your time and will bring many years of Ajaxy Style Switchin’ Fun!
Many Blessings, Merry Christmas and have a great new year! |
2005 |
Dustin Diaz |
dustindiaz |
2005-12-18T00:00:00+00:00 |
https://24ways.org/2005/introducing-udasss/ |
code |
| 324 |
Debugging CSS with the DOM Inspector |
An Inspector Calls
The larger your site and your CSS becomes, the more likely that you will run into bizarre, inexplicable problems. Why does that heading have all that extra padding? Why is my text the wrong colour? Why does my navigation have a large moose dressed as Noel Coward on top of all the links?
Perhaps you work in a collaborative environment, where developers and other designers are adding code? In which case, the likelihood of CSS strangeness is higher.
You need to debug. You need Firefox’s wise-guy know-it-all, the DOM Inspector.
The DOM Inspector knows where everything is in your layout, and more importantly, what causes it to look the way it does. So without further ado, load up any css based site in your copy of Firefox (or Flock for that matter), and launch the DOM Inspector from the Tools menu.
The inspector uses two main panels – the left to show the DOM tree of the page, and the right to show you detail:
The Inspector will look at whatever site is in the front-most window or tab, but you can also use it without another window. Type in a URL at the top (A), press ‘Inspect’ (B) and a third panel appears at the bottom, with the browser view. I find this layout handier than looking at a window behind the DOM Inspector.
Step 1 – find your node!
Each element on your page – be it a HTML tag or a piece of text, is called a ‘node’ of the DOM tree. These nodes are all listed in the left hand panel, with any ID or CLASS attribute values next to them. When you first look at a page, you won’t see all those yet. Nested HTML elements (such as a link inside a paragraph) have a reveal triangle next to their name, clicking this takes you one level further down.
This can be fine for finding the node you want to look at, but there are easier ways. Say you have a complex rounded box technique that involves 6 nested DIVs? You’d soon get tired of clicking all those triangles to find the element you want to inspect. Click the top left icon © – “Find a node to inspect by clicking on it” and then select the area you want to inspect. Boom! All that drilling down the DOM tree has been done for you! Huzzah!
If you’re looking for an element that you know has an ID (such as <ul id="navigation">), or a specific HTML tag or attribute, click the binoculars icon (D) for “Finds a node to inspect by ID, tag or attribute” (You can also use Ctrl-F or Apple-F to do this if the DOM Inspector is the frontmost window) :
Type in the name and Bam! You’re there! Pressing F3 will take you to any other instances. Notice also, that when you click on a node in the inspector, it highlights where it is in the browser view with a flashing red border!
Now that we’ve found the troublesome node on the page, we can find out what’s up with it…
Step 2 – Debug that node!
Once the node is selected, we move over to the right hand panel. Choose ‘CSS Style Rules’ from the document menu (E), and all the CSS rules that apply to that node are revealed, in the order that they load:
You’ll notice that right at the top, there is a CSS file you might not recognise, with a file path beginning with “resource://”. This is the browsers default CSS, that creates the basic rendering. You can mostly ignore this, especially if use the star selector method of resetting default browser styles.
Your style sheets come next. See how helpful it is? It even tells you the line number where to find the related CSS rules! If you use CSS shorthand, you’ll notice that the values are split up (e.g margin-left, margin-right etc.).
Now that you can see all the style rules affecting that node, the rest is up to you! Happy debugging! |
2005 |
Jon Hicks |
jonhicks |
2005-12-22T00:00:00+00:00 |
https://24ways.org/2005/debugging-css-with-the-dom-inspector/ |
process |
| 325 |
"Z's not dead baby, Z's not dead" |
While Mr. Moll and Mr. Budd have pipped me to the post with their predictions for 2006, I’m sure they won’t mind if I sneak in another. The use of positioning together with z-index will be one of next year’s hot techniques
Both has been a little out of favour recently. For many, positioned layouts made way for the flexibility of floats. Developers I speak to often associate z-index with Dreamweaver’s layers feature. But in combination with alpha transparency support for PNG images in IE7 and full implementation of position property values, the stacking of elements with z-index is going to be big. I’m going to cover the basics of z-index and how it can be used to create designs which ‘break out of the box’.
No positioning? No Z!
Remember geometry? The x axis represents the horizontal, the y axis represents the vertical. The z axis, which is where we get the z-index, represents /depth/. Elements which are stacked using z-index are stacked from front to back and z-index is only applied to elements which have their position property set to relative or absolute. No positioning, no z-index. Z-index values can be either negative or positive and it is the element with the highest z-index value appears closest to the viewer, regardless of its order in the source. Furthermore, if more than one element are given the same z-index, the element which comes last in source order comes out top of the pile.
Let’s take three <div>s.
<div id="one"></div>
<div id="two"></div>
<div id="three"></div>
#one {
position: relative;
z-index: 3;
}
#two {
position: relative;
z-index: 1;
}
#three {
position: relative;
z-index: 2;
}
As you can see, the <div> with the z-index of 3 will appear closest, even though it comes before its siblings in the source order. As these three <div>s have no defined positioning context in the form of a positioned parent such as a <div>, their stacking order is defined from the root element <html>. Simple stuff, but these building blocks are the basis on which we can create interesting interfaces (particularly when used in combination with image replacement and transparent PNGs).
Brand building
Now let’s take three more basic elements, an <h1>, <blockquote> and <p>, all inside a branding <div> which acts a new positioning context. By enclosing them inside a positioned parent, we establish a new stacking order which is independent of either the root element or other positioning contexts on the page.
<div id="branding">
<h1>Worrysome.com</h1>
<blockquote><p>Don' worry 'bout a thing...</p></blockquote>
<p>Take the weight of the world off your shoulders.</p>
</div>
Applying a little positioning and z-index magic we can both set the position of these elements inside their positioning context and their stacking order. As we are going to use background images made from transparent PNGs, each element will allow another further down the stacking order to show through. This makes for some novel effects, particularly in liquid layouts.
(Ed: We’re using n below to represent whatever values you require for your specific design.)
#branding {
position: relative;
width: n;
height: n;
background-image: url(n);
}
#branding>h1 {
position: absolute;
left: n;
top: n;
width: n;
height: n;
background-image: url(h1.png);
text-indent: n;
}
#branding>blockquote {
position: absolute;
left: n;
top: n;
width: n;
height: n;
background-image: url(bq.png);
text-indent: n;
}
#branding>p {
position: absolute;
right: n;
top: n;
width: n;
height: n;
background-image: url(p.png);
text-indent: n;
}
Next we can begin to see how the three elements build upon each other.
1. Elements outlined
2. Positioned elements overlayed to show context
3. Our final result
Multiple stacking orders
Not only can elements within a positioning context be given a z-index, but those positioning contexts themselves can also be stacked.
Two positioning contexts, each with their own stacking order
Interestingly each stacking order is independent of that of either the root element or its siblings and we can exploit this to make complex layouts from just a few semantic elements. This technique was used heavily on my recent redesign of Karova.com.
Dissecting part of Karova.com
First the XHTML. The default template markup used for the site places <div id="nav_main"> and <div id="content"> as siblings inside their container.
<div id="container">
<div id="content">
<h2></h2>
<p></p>
</div>
<div id="nav_main"></div>
</div>
By giving the navigation <div> a lower z-index than the content <div> we can ensure that the positioned content elements will always appear closest to the viewer, despite the fact that the navigation comes after the content in the source.
#content {
position: relative;
z-index: 2;
}
#nav_main {
position: absolute;
z-index: 1;
}
Now applying absolute positioning with a negative top value to the <h2> and a higher z-index value than the following <p> ensures that the header sits not only on top of the navigation but also the styled paragraph which follows it.
h2 {
position: absolute;
z-index: 200;
top: -n;
}
h2+p {
position: absolute;
z-index: 100;
margin-top: -n;
padding-top: n;
}
Dissecting part of Karova.com
You can see the full effect in the wild on the Karova.com site.
Have a great holiday season! |
2005 |
Andy Clarke |
andyclarke |
2005-12-16T00:00:00+00:00 |
https://24ways.org/2005/zs-not-dead-baby-zs-not-dead/ |
design |
| 326 |
Don't be eval() |
JavaScript is an interpreted language, and like so many of its peers it includes the all powerful eval() function. eval() takes a string and executes it as if it were regular JavaScript code. It’s incredibly powerful and incredibly easy to abuse in ways that make your code slower and harder to maintain. As a general rule, if you’re using eval() there’s probably something wrong with your design.
Common mistakes
Here’s the classic misuse of eval(). You have a JavaScript object, foo, and you want to access a property on it – but you don’t know the name of the property until runtime. Here’s how NOT to do it:
var property = 'bar';
var value = eval('foo.' + property);
Yes it will work, but every time that piece of code runs JavaScript will have to kick back in to interpreter mode, slowing down your app. It’s also dirt ugly.
Here’s the right way of doing the above:
var property = 'bar';
var value = foo[property];
In JavaScript, square brackets act as an alternative to lookups using a dot. The only difference is that square bracket syntax expects a string.
Security issues
In any programming language you should be extremely cautious of executing code from an untrusted source. The same is true for JavaScript – you should be extremely cautious of running eval() against any code that may have been tampered with – for example, strings taken from the page query string. Executing untrusted code can leave you vulnerable to cross-site scripting attacks.
What’s it good for?
Some programmers say that eval() is B.A.D. – Broken As Designed – and should be removed from the language. However, there are some places in which it can dramatically simplify your code. A great example is for use with XMLHttpRequest, a component of the set of tools more popularly known as Ajax. XMLHttpRequest lets you make a call back to the server from JavaScript without refreshing the whole page. A simple way of using this is to have the server return JavaScript code which is then passed to eval(). Here is a simple function for doing exactly that – it takes the URL to some JavaScript code (or a server-side script that produces JavaScript) and loads and executes that code using XMLHttpRequest and eval().
function evalRequest(url) {
var xmlhttp = new XMLHttpRequest();
xmlhttp.onreadystatechange = function() {
if (xmlhttp.readyState==4 && xmlhttp.status==200) {
eval(xmlhttp.responseText);
}
}
xmlhttp.open("GET", url, true);
xmlhttp.send(null);
}
If you want this to work with Internet Explorer you’ll need to include this compatibility patch. |
2005 |
Simon Willison |
simonwillison |
2005-12-07T00:00:00+00:00 |
https://24ways.org/2005/dont-be-eval/ |
code |
| 327 |
Improving Form Accessibility with DOM Scripting |
The form label element is an incredibly useful little element – it lets you link the form field unquestionably with the descriptive label text that sits alongside or above it. This is a very useful feature for people using screen readers, but there are some problems with this element.
What happens if you have one piece of data that, for various reasons (validation, the way your data is collected/stored etc), needs to be collected using several form elements?
The classic example is date of birth – ideally, you’ll ask for the date of birth once but you may have three inputs, one each for day, month and year, that you also need to provide hints about the format required. The problem is that to be truly accessible you need to label each field. So you end up needing something to say “this is a date of birth”, “this is the day field”, “this is the month field” and “this is the day field”. Seems like overkill, doesn’t it? And it can uglify a form no end.
There are various ways that you can approach it (and I think I’ve seen them all). Some people omit the label and rely on the title attribute to help the user through; others put text in a label but make the text 1 pixel high and merging in to the background so that screen readers can still get that information. The most common method, though, is simply to set the label to not display at all using the CSS display:none property/value pairing (a technique which, for the time being, seems to work on most screen readers). But perhaps we can do more with this?
The technique I am suggesting as another alternative is as follows (here comes the pseudo-code):
Start with a totally valid and accessible form
Ensure that each form input has a label that is linked to its related form control
Apply a class to any label that you don’t want to be visible (for example superfluous)
Then, through the magic of unobtrusive JavaScript/the DOM, manipulate the page as follows once the page has loaded:
Find all the label elements that are marked as superfluous and hide them
Find out what input element each of these label elements is related to
Then apply a hint about formatting required for input (gleaned from the original, now-hidden label text) – add it to the form input as default text
Finally, add in a behaviour that clears or selects the default text (as you choose)
So, here’s the theory put into practice – a date of birth, grouped using a fieldset, and with the behaviours added in using DOM, and here’s the JavaScript that does the heavy lifting.
But why not just use display:none? As demonstrated at Juicy Studio, display:none seems to work quite well for hiding label elements. So why use a sledge hammer to crack a nut? In all honesty, this is something of an experiment, but consider the following:
Using the DOM, you can add extra levels of help, potentially across a whole form – or even range of forms – without necessarily increasing your markup (it goes beyond simply hiding labels)
Screen readers today may identify a label that is set not to display, but they may not in the future – this might provide a way around
By expanding this technique above, it might be possible to visually change the parent container that groups these items – in this case, a fieldset and legend, which are notoriously difficult to style consistently across different browsers – while still retaining the underlying semantic/logical structure
Well, it’s an idea to think about at least. How is it for you? How else might you use DOM scripting to improve the accessiblity or usability of your forms? |
2005 |
Ian Lloyd |
ianlloyd |
2005-12-03T00:00:00+00:00 |
https://24ways.org/2005/improving-form-accessibility-with-dom-scripting/ |
code |
| 328 |
Swooshy Curly Quotes Without Images |
The problem
Take a quote and render it within blockquote tags, applying big, funky and stylish curly quotes both at the beginning and the end without using any images – at all.
The traditional way
Feint background images under the text, or an image in the markup housed in a little float. Often designers only use the opening curly quote as it’s just too difficult to float a closing one.
Why is the traditional way bad?
Well, for a start there are no actual curly quotes in the text (unless you’re doing some nifty image replacement). Thus with CSS disabled you’ll only have default blockquote styling to fall back on. Secondly, images don’t resize, so scaling text will have no affect on your graphic curlies.
The solution
Use really big text. Then it can be resized by the browser, resized using CSS, and even be restyled with a new font style if you fancy it. It’ll also make sense when CSS is unavailable.
The problem
Creating “Drop Caps” with CSS has been around for a while (Big Dan Cederholm discusses a neat solution in that first book of his), but drop caps are normal characters – the A to Z or 1 to 10 – and these can all be pulled into a set space and do not serve up a ton of whitespace, unlike punctuation characters.
Curly quotes aren’t like traditional characters. Like full stops, commas and hashes they float within the character space and leave lots of dead white space, making it bloody difficult to manipulate them with CSS. Styles generally fit around text, so cutting into that character is tricky indeed. Also, all that extra white space is going to push into the quote text and make it look pretty uneven. This grab highlights the actual character space:
See how this is emphasized when we add a normal alphabetical character within the span. This is what we’re dealing with here:
Then, there’s size. Call in a curly quote at less than 300% font-size and it ain’t gonna look very big. The white space it creates will be big enough, but the curlies will be way too small. We need more like 700% (as in this example) to make an impression, but that sure makes for a big character space.
Prepare the curlies
Firstly, remove the opening “ from the quote. Replace it with the opening curly quote character entity “. Then replace the closing “ with the entity reference for that, which is ”. Now at least the curlies will look nice and swooshy.
Add the hooks
Two reasons why we aren’t using :first-letter pseudo class to manipulate the curlies. Firstly, only CSS2-friendly browsers would get what we’re doing, and secondly we need to affect the last “letter” of our text also – the closing curly quote.
So, add a span around the opening curly, and a second span around the closing curly, giving complete control of the characters:
<blockquote><span class="bqstart">“</span>Speech marks. Curly quotes. That annoying thing cool people do with their fingers to emphasize a buzzword, shortly before you hit them.<span class="bqend">”</span></blockquote>
So far nothing will look any different, aside form the curlies looking a bit nicer. I know we’ve just added extra markup, but the benefits as far as accessibility are concerned are good enough for me, and of course there are no images to download.
The CSS
OK, easy stuff first. Our first rule .bqstart floats the span left, changes the color, and whacks the font-size up to an exuberant 700%. Our second rule .bqend does the same tricks aside from floating the curly to the right.
.bqstart {
float: left;
font-size: 700%;
color: #FF0000;
}
.bqend {
float: right;
font-size: 700%;
color: #FF0000;
}
That gives us this, which is rubbish. I’ve highlighted the actual span area with outlines:
Note that the curlies don’t even fit inside the span! At this stage on IE 6 PC you won’t even see the quotes, as it only places focus on what it thinks is in the div. Also, the quote text is getting all spangled.
Fiddle with margin and padding
Think of that span outline box as a window, and that you need to position the curlies within that window in order to see them. By adding some small adjustments to the margin and padding it’s possible to position the curlies exactly where you want them, and remove the excess white space by defining a height:
.bqstart {
float: left;
height: 45px;
margin-top: -20px;
padding-top: 45px;
margin-bottom: -50px;
font-size: 700%;
color: #FF0000;
}
.bqend {
float: right;
height: 25px;
margin-top: 0px;
padding-top: 45px;
font-size: 700%;
color: #FF0000;
}
I wanted the blocks of my curlies to align with the quote text, whereas you may want them to dig in or stick out more. Be aware however that my positioning works for IE PC and Mac, Firefox and Safari. Too much tweaking seems to break the magic in various browsers at various times. Now things are fitting beautifully:
I must admit that the heights, margins and spacing don’t make a lot of sense if you analyze them. This was a real trial and error job. Get it working on Safari, and IE would fail. Sort IE, and Firefox would go weird.
Finished
The final thing looks ace, can be resized, looks cool without styles, and can be edited with CSS at any time. Here’s a real example (note that I’m specifying Lucida Grande and then Verdana for my curlies):
“Speech marks. Curly quotes. That annoying thing cool people do with their fingers to emphasize a buzzword, shortly before you hit them.”
Browsers happy
As I said, too much tweaking of margins and padding can break the effect in some browsers. Even now, Firefox insists on dropping the closing curly by approximately 6 or 7 pixels, and if I adjust the padding for that, it’ll crush it into the text on Safari or IE. Weird. Still, as I close now it seems solid through resizing tests on Safari, Firefox, Camino, Opera and IE PC and Mac. Lovely.
It’s probably not perfect, but together we can beat the evil typographic limitations of the web and walk together towards a brighter, more aligned world. Merry Christmas. |
2005 |
Simon Collison |
simoncollison |
2005-12-21T00:00:00+00:00 |
https://24ways.org/2005/swooshy-curly-quotes-without-images/ |
business |
| 329 |
Broader Border Corners |
A note from the editors: Since this article was written the CSS border-radius property has become widely supported in browsers. It should be preferred to this image technique.
A quick and easy recipe for turning those single-pixel borders that the kids love so much into into something a little less right-angled.
Here’s the principle: We have a box with a one-pixel wide border around it. Inside that box is another box that has a little rounded-corner background image sitting snugly in one of its corners. The inner-box is then nudged out a bit so that it’s actually sitting on top of the outer box. If it’s all done properly, that little background image can mask the hard right angle of the default border of the outer-box, giving the impression that it actually has a rounded corner.
Take An Image, Finely Chopped
Add A Sprinkle of Markup
<div id="content">
<p>Lorem ipsum etc. etc. etc.</p>
</div>
Throw In A Dollop of CSS
#content {
border: 1px solid #c03;
}
#content p {
background: url(corner.gif) top left no-repeat;
position: relative;
left: -1px;
top: -1px;
padding: 1em;
margin: 0;
}
Bubblin’ Hot
The content div has a one-pixel wide red border around it.
The paragraph is given a single instance of the background image, created to look like a one-pixel wide arc.
The paragraph is shunted outside of the box – back one pixel and up one pixel – so that it is sitting over the div’s border. The white area of the image covers up that part of the border’s corner, and the arc meets up with the top and left border.
Because, in this example, we’re applying a background image to a paragraph, its top margin needs to be zeroed so that it starts at the top of its container.
Et voilà. Bon appétit.
Extra Toppings
If you want to apply a curve to each one of the corners and you run out of meaningful markup to hook the background images on to, throw some spans or divs in the mix (there’s nothing wrong with this if that’s the effect you truly want – they don’t hurt anybody) or use some nifty DOM Scripting to put the scaffolding in for you.
Note that if you’ve got more than one of these relative corners, you will need to compensate for the starting position of each box which is nested in an already nudged parent.
You’re not limited to one pixel wide, rounded corners – the same principles apply to thicker borders, or corners with different shapes. |
2005 |
Patrick Griffiths |
patrickgriffiths |
2005-12-14T00:00:00+00:00 |
https://24ways.org/2005/broader-border-corners/ |
design |
| 330 |
An Explanation of Ems |
Ems are so-called because they are thought to approximate the size of an uppercase letter M (and so are pronounced emm), although 1em is actually significantly larger than this. The typographer Robert Bringhurst describes the em thus:
The em is a sliding measure. One em is a distance equal to the type size. In 6 point type, an em is 6 points; in 12 point type an em is 12 points and in 60 point type an em is 60 points. Thus a one em space is proportionately the same in any size.
To illustrate this principle in terms of CSS, consider these styles:
#box1 {
font-size: 12px;
width: 1em;
height: 1em;
border:1px solid black;
}
#box2 {
font-size: 60px;
width: 1em;
height: 1em;
border: 1px solid black;
}
These styles will render like:
M
and
M
Note that both boxes have a height and width of 1em but because they have different font sizes, one box is bigger than the other. Box 1 has a font-size of 12px so its width and height is also 12px; similarly the text of box 2 is set to 60px and so its width and height are also 60px. |
2005 |
Richard Rutter |
richardrutter |
2005-12-02T00:00:00+00:00 |
https://24ways.org/2005/an-explanation-of-ems/ |
design |
| 331 |
Splintered Striper |
Back in March 2004, David F. Miller demonstrated a little bit of DOM scripting magic in his A List Apart article Zebra Tables.
His script programmatically adds two alternating CSS background colours to table rows, making them more readable and visually pleasing, while saving the document author the tedious task of manually assigning the styling to large static data tables.
Although David’s original script performs its duty well, it is nonetheless very specific and limited in its application. It only:
works on a single table, identified by its id, with at least a single tbody section
assigns a background colour
allows two colours for odd and even rows
acts on data cells, rather than rows, and then only if they have no class or background colour already defined
Taking it further
In a recent project I found myself needing to apply a striped effect to a medium sized unordered list. Instead of simply modifying the Zebra Tables code for this particular case, I decided to completely recode the script to make it more generic.
Being more general purpose, the function in my splintered striper experiment is necessarily more complex. Where the original script only expected a single parameter (the id of the target table), the new function is called as follows:
striper('[parent element tag]','[parent element class or null]','[child element tag]','[comma separated list of classes]')
This new, fairly self-explanatory function:
targets any type of parent element (and, if specified, only those with a certain class)
assigns two or more classes (rather than just two background colours) to the child elements inside the parent
preserves any existing classes already assigned to the child elements
See it in action
View the demonstration page for three usage examples. For simplicity’s sake, we’re making the calls to the striper function from the body’s onload attribute. In a real deployment situation, we would look at attaching a behaviour to the onload programmatically — just remember that, as we need to pass variables to the striper function, this would involve creating a wrapper function which would then be attached…something like:
function stripe() {
striper('tbody','splintered','tr','odd,even');
}
window.onload=stripe;
A final thought
Just because the function is called striper does not mean that it’s limited to purely applying a striped look; as it’s more of a general purpose “alternating class assignment” script, you can achieve a whole variety of effects with it. |
2005 |
Patrick Lauke |
patricklauke |
2005-12-15T00:00:00+00:00 |
https://24ways.org/2005/splintered-striper/ |
code |
| 332 |
CSS Layout Starting Points |
I build a lot of CSS layouts, some incredibly simple, others that cause sleepless nights and remind me of the torturous puzzle books that were given to me at Christmas by aunties concerned for my education. However, most of the time these layouts fit quite comfortably into one of a very few standard formats. For example:
Liquid, multiple column with no footer
Liquid, multiple column with footer
Fixed width, centred
Rather than starting out with blank CSS and (X)HTML documents every time you need to build a layout, you can fairly quickly create a bunch of layout starting points, that will give you a solid basis for creating the rest of the design and mean that you don’t have to remember how a three column layout with a footer is best achieved every time you come across one!
These starting points can be really basic, in fact that’s exactly what you want as the final design, the fonts, the colours and so on will be different every time. It’s just the main sections we want to be able to quickly get into place. For example, here is a basic starting point CSS and XHTML document for a fixed width, centred layout with a footer.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Fixed Width and Centred starting point document</title>
<link rel="stylesheet" type="text/css" href="fixed-width-centred.css" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
</head>
<body>
<div id="wrapper">
<div id="side">
<div class="inner">
<p>Sidebar content here</p>
</div>
</div>
<div id="content">
<div class="inner">
<p>Your main content goes here.</p>
</div>
</div>
<div id="footer">
<div class="inner">
<p>Ho Ho Ho!</p>
</div>
</div>
</div>
</body>
</html>
body {
text-align: center;
min-width: 740px;
padding: 0;
margin: 0;
}
#wrapper {
text-align: left;
width: 740px;
margin-left: auto;
margin-right: auto;
padding: 0;
}
#content {
margin: 0 200px 0 0;
}
#content .inner {
padding-top: 1px;
margin: 0 10px 10px 10px;
}
#side {
float: right;
width: 180px;
margin: 0;
}
#side .inner {
padding-top: 1px;
margin: 0 10px 10px 10px;
}
#footer {
margin-top: 10px;
clear: both;
}
#footer .inner {
margin: 10px;
}
9 times out of 10, after figuring out exactly what main elements I have in a layout, I can quickly grab the ‘one I prepared earlier’, mark-up the relevant sections within the ready-made divs, and from that point on, I only need to worry about the contents of those different areas. The actual layout is tried and tested, one that I know works well in different browsers and that is unlikely to throw me any nasty surprises later on. In addition, considering how the layout is going to work first prevents the problem of developing a layout, then realising you need to put a footer on it, and needing to redevelop the layout as the method you have chosen won’t work well with a footer.
While enjoying your mince pies and mulled wine during the ‘quiet time’ between Christmas and New Year, why not create some starting point layouts of your own? The css-discuss Wiki, CSS layouts section is a great place to find examples that you can try out and find your favourite method of creating the various layout types. |
2005 |
Rachel Andrew |
rachelandrew |
2005-12-04T00:00:00+00:00 |
https://24ways.org/2005/css-layout-starting-points/ |
code |
| 333 |
The Attribute Selector for Fun and (no ad) Profit |
If I had a favourite CSS selector, it would undoubtedly be the attribute selector (Ed: You really need to get out more). For those of you not familiar with the attribute selector, it allows you to style an element based on the existence, value or partial value of a specific attribute.
At it’s very basic level you could use this selector to style an element with particular attribute, such as a title attribute.
<abbr title="Cascading Style Sheets">CSS</abbr>
In this example I’m going to make all <abbr> elements with a title attribute grey. I am also going to give them a dotted bottom border that changes to a solid border on hover. Finally, for that extra bit of feedback, I will change the cursor to a question mark on hover as well.
abbr[title] {
color: #666;
border-bottom: 1px dotted #666;
}
abbr[title]:hover {
border-bottom-style: solid;
cursor: help;
}
This provides a nice way to show your site users that <abbr> elements with title tags are special, as they contain extra, hidden information.
Most modern browsers such as Firefox, Safari and Opera support the attribute selector. Unfortunately Internet Explorer 6 and below does not support the attribute selector, but that shouldn’t stop you from adding nice usability embellishments to more modern browsers.
Internet Explorer 7 looks set to implement this CSS2.1 selector, so expect to see it become more common over the next few years.
Styling an element based on the existence of an attribute is all well and good, but it is still pretty limited. Where attribute selectors come into their own is their ability to target the value of an attribute. You can use this for a variety of interesting effects such as styling VoteLinks.
VoteWhats?
If you haven’t heard of VoteLinks, it is a microformat that allows people to show their approval or disapproval of a links destination by adding a pre-defined keyword to the rev attribute.
For instance, if you had a particularly bad meal at a restaurant, you could signify your dissaproval by adding a rev attribute with a value of vote-against.
<a href="http://www.mommacherri.co.uk/" rev="vote-against">Momma Cherri's</a>
You could then highlight these links by adding an image to the right of these links.
a[rev="vote-against"]{
padding-right: 20px;
background: url(images/vote-against.png) no-repeat right top;
}
This is a useful technique, but it will only highlight VoteLinks on sites you control. This is where user stylesheets come into effect. If you create a user stylesheet containing this rule, every site you visit that uses VoteLinks will receive your new style.
Cool huh?
However my absolute favourite use for attribute selectors is as a lightweight form of ad blocking. Most online adverts conform to industry-defined sizes. So if you wanted to block all banner-ad sized images, you could simply add this line of code to your user stylesheet.
img[width="468"][height="60"],
img[width="468px"][height="60px"] {
display: none !important;
}
To hide any banner-ad sized element, such as flash movies, applets or iFrames, simply apply the above rule to every element using the universal selector.
*[width="468"][height="60"], *[width="468px"][height="60px"] {
display: none !important;
}
Just bare in mind when using this technique that you may accidentally hide something that isn’t actually an advert; it just happens to be the same size.
The Interactive Advertising Bureau lists a number of common ad sizes. Using these dimensions, you can create stylesheet that blocks all the popular ad formats. Apply this as a user stylesheet and you never need to suffer another advert again.
Here’s wishing you a Merry, ad-free Christmas. |
2005 |
Andy Budd |
andybudd |
2005-12-11T00:00:00+00:00 |
https://24ways.org/2005/the-attribute-selector-for-fun-and-no-ad-profit/ |
code |
| 334 |
Transitional vs. Strict Markup |
When promoting web standards, standardistas often talk about XHTML as being more strict than HTML. In a sense it is, since it requires that all elements are properly closed and that attribute values are quoted. But there are two flavours of XHTML 1.0 (three if you count the Frameset DOCTYPE, which is outside the scope of this article), defined by the Transitional and Strict DOCTYPEs. And HTML 4.01 also comes in those flavours.
The names reveal what they are about: Transitional DOCTYPEs are meant for those making the transition from older markup to modern ways. Strict DOCTYPEs are actually the default – the way HTML 4.01 and XHTML 1.0 were constructed to be used.
A Transitional DOCTYPE may be used when you have a lot of legacy markup that cannot easily be converted to comply with a Strict DOCTYPE. But Strict is what you should be aiming for. It encourages, and in some cases enforces, the separation of structure and presentation, moving the presentational aspects from markup to CSS. From the HTML 4 Document Type Definition:
This is HTML 4.01 Strict DTD, which excludes the presentation attributes and elements that W3C expects to phase out as support for style sheets matures. Authors should use the Strict DTD when possible, but may use the Transitional DTD when support for presentation attribute and elements is required.
An additional benefit of using a Strict DOCTYPE is that doing so will ensure that browsers use their strictest, most standards compliant rendering modes.
Tommy Olsson provides a good summary of the benefits of using Strict over Transitional in Ten questions for Tommy Olsson at Web Standards Group:
In my opinion, using a Strict DTD, either HTML 4.01 Strict or XHTML 1.0 Strict, is far more important for the quality of the future web than whether or not there is an X in front of the name. The Strict DTD promotes a separation of structure and presentation, which makes a site so much easier to maintain.
For those looking to start using web standards and valid, semantic markup, it is important to understand the difference between Transitional and Strict DOCTYPEs. For complete listings of the differences between Transitional and Strict DOCTYPEs, see XHTML: Differences between Strict & Transitional, Comparison of Strict and Transitional XHTML, and XHTML1.0 Element Attributes by DTD.
Some of the differences are more likely than others to cause problems for developers moving from a Transitional DOCTYPE to a Strict one, and I’d like to mention a few of those.
Elements that are not allowed in Strict DOCTYPEs
center
font
iframe
strike
u
Attributes not allowed in Strict DOCTYPEs
align (allowed on elements related to tables: col, colgroup, tbody, td, tfoot, th, thead, and tr)
language
background
bgcolor
border (allowed on table)
height (allowed on img and object)
hspace
name (allowed in HTML 4.01 Strict, not allowed on form and img in XHTML 1.0 Strict)
noshade
nowrap
target
text, link, vlink, and alink
vspace
width (allowed on img, object, table, col, and colgroup)
Content model differences
An element type’s content model describes what may be contained by an instance of the element type. The most important difference in content models between Transitional and Strict is that blockquote, body, and form elements may only contain block level elements. A few examples:
text and images are not allowed immediately inside the body element, and need to be contained in a block level element like p or div
input elements must not be direct descendants of a form element
text in blockquote elements must be wrapped in a block level element like p or div
Go Strict and move all presentation to CSS
Something that can be helpful when doing the transition from Transitional to Strict DOCTYPEs is to focus on what each element of the page you are working on is instead of how you want it to look.
Worry about looks later and get the structure and semantics right first. |
2005 |
Roger Johansson |
rogerjohansson |
2005-12-13T00:00:00+00:00 |
https://24ways.org/2005/transitional-vs-strict-markup/ |
code |
| 335 |
Naughty or Nice? CSS Background Images |
Web Standards based development involves many things – using semantically sound HTML to provide structure to our documents or web applications, using CSS for presentation and layout, using JavaScript responsibly, and of course, ensuring that all that we do is accessible and interoperable to as many people and user agents as we can.
This we understand to be good.
And it is good.
Except when we don’t clearly think through the full implications of using those techniques.
Which often happens when time is short and we need to get things done.
Here are some naughty examples of CSS background images with their nicer, more accessible counterparts.
Transaction related messages
I’m as guilty of this as others (or, perhaps, I’m the only one that has done this, in which case this can serve as my holiday season confessional) We use lovely little icons to show status messages for a transaction to indicate if the action was successful, or was there a warning or error? For example:
“Your postal/zip code was not in the correct format.”
Notice that we place a nice little icon there, and use background colours and borders to convey a specific message: there was a problem that needs to be fixed. Notice that all of this visual information is now contained in the CSS rules for that div:
<div class="error">
<p>Your postal/zip code was not in the correct format.</p>
</div>
div.error {
background: #ffcccc url(../images/error_small.png) no-repeat 5px 4px;
color: #900;
border-top: 1px solid #c00;
border-bottom: 1px solid #c00;
padding: 0.25em 0.5em 0.25em 2.5em;
font-weight: bold;
}
Using this approach also makes it very easy to create a div.success and div.warning CSS rules meaning we have less to change in our HTML.
Nice, right?
No. Naughty.
Visual design communicates
The CSS is being used to convey very specific information. The choice of icon, the choice of background colour and borders tell us visually that there is something wrong.
With the icon as a background image – there is no way to specify any alt text for the icon, and significant meaning is lost. A screen reader user, for example, misses the fact that it is an “error.”
The solution? Ask yourself: what is the bare minimum needed to indicate there was an error? Currently in the absence of CSS there will be no icon – which (I’m hoping you agree) is critical to communicating there was an error.
The icon should be considered content and not simply presentational.
The borders and background colour are certainly much less critical – they belong in the CSS.
Lets change the code to place the image directly in the HTML and using appropriate alt text to better communicate the meaning of the icon to all users:
<div class="bettererror">
<img src="images/error_small.png" alt="Error" />
<p>Your postal/zip code was not in the correct format.</p>
</div>
div.bettererror {
background-color: #ffcccc;
color: #900;
border-top: 1px solid #c00;
border-bottom: 1px solid #c00;
padding: 0.25em 0.5em 0.25em 2.5em;
font-weight: bold;
position: relative;
min-height: 1.25em;
}
div.bettererror img {
display: block;
position: absolute;
left: 0.25em;
top: 0.25em;
padding: 0;
margin: 0;
}
div.bettererror p {
position: absolute;
left: 2.5em;
padding: 0;
margin: 0;
}
Compare these two examples of transactional messages
Status of a Record
This example is pretty straightforward. Consider the following: a real estate listing on a web site. There are three “states” for a listing: new, normal, and sold. Here’s how they look:
Example of a New Listing
Example of A Sold Listing
If we (forgive the pun) blindly apply the “use a CSS background image” technique we clearly run into problems with the new and sold images – they actually contain content with no way to specify an alternative when placed in the CSS.
In this case of the “new” image, we can use the same strategy as we used in the first example (the transaction result). The “new” image should be considered content and is placed in the HTML as part of the <h2>...</h2> that identifies the listing.
However when considering the “sold” listing, there are less changes to be made to keep the same look by leaving the “SOLD” image as a background image and providing the equivalent information elsewhere in the listing – namely, right in the heading.
For those that can’t see the background image, the status is communicated clearly and right away. A screen reader user that is navigating by heading or viewing a listing will know right away that a particular property is sold.
Of note here is that in both cases (new and sold) placing the status near the beginning of the record helps with a zoom layout as well.
Better Example of A Sold Listing
Summary
Remember: in the holiday season, its what you give that counts!! Using CSS background images is easy and saves time for you but think of the children. And everyone else for that matter…
CSS background images should only be used for presentational images, not for those that contain content (unless that content is already represented and readily available elsewhere). |
2005 |
Derek Featherstone |
derekfeatherstone |
2005-12-20T00:00:00+00:00 |
https://24ways.org/2005/naughty-or-nice-css-background-images/ |
code |
| 336 |
Practical Microformats with hCard |
You’ve probably heard about microformats over the last few months. You may have even read the easily digestible introduction at Digital Web Magazine, but perhaps you’ve not found time to actually implement much yet. That’s understandable, as it can sometimes be difficult to see exactly what you’re adding by applying a microformat to a page. Sure, you’re semantically enhancing the information you’re marking up, and the Semantic Web is a great idea and all, but what benefit is it right now, today?
Well, the answer to that question is simple: you’re adding lots of information that can be and is being used on the web here and now. The big ongoing battle amongst the big web companies if one of territory over information. Everyone’s grasping for as much data as possible. Some of that information many of us are cautious to give away, but a lot of is happy to be freely available. Of the data you’re giving away, it makes sense to give it as much meaning as possible, thus enabling anyone from your friends and family to the giant search company down the road to make the most of it.
Ok, enough of the waffle, let’s get working.
Introducing hCard
You may have come across hCard. It’s a microformat for describing contact information (or really address book information) from within your HTML. It’s based on the vCard format, which is the format the contacts/address book program on your computer uses. All the usual fields are available – name, address, town, website, email, you name it.
If you’re running Firefox and Greasemonkey (or if you can, just to try this out), install this user script. What it does is look for instances of the hCard microformat in a page, and then add in a link to pass any hCards it finds to a web service which will convert it to a vCard. Take a look at the About the author box at the bottom of this article. It’s a hCard, so you should be able to click the icon the user script inserts and add me to your Outlook contacts or OS X Address Book with just a click.
So microformats are useful after all. Free microformats all round!
Implementing hCard
This is the really easy bit. All the hCard microformat is, is a bunch of predefined class names that you apply to the markup you’ve probably already got around your contact information. Let’s take the example of the About the author box from this article. Here’s how the markup looks without hCard:
<div class="bio">
<h3>About the author</h3>
<p>Drew McLellan is a web developer, author and no-good swindler from
just outside London, England. At the
<a href="http://www.webstandards.org/">Web Standards Project</a> he works
on press, strategy and tools. Drew keeps a
<a href="http://www.allinthehead.com/">personal weblog</a> covering web
development issues and themes.</p>
</div>
This is a really simple example because there’s only two key bits of address book information here:- my name and my website address. Let’s push it a little and say that the Web Standards Project is the organisation I work for – that gives us Name, Company and URL.
To kick off an hCard, you need a containing object with a class of vcard. The div I already have with a class of bio is perfect for this – all it needs to do is contain the rest of the contact information.
The next thing to identify is my name. hCard uses a class of fn (meaning Full Name) to identify a name. As is this case there’s no element surrounding my name, we can just use a span. These changes give us:
<div class="bio vcard">
<h3>About the author</h3>
<p><span class="fn">Drew McLellan</span> is a web developer...
The two remaining items are my URL and the organisation I belong to. The class names designated for those are url and org respectively. As both of those items are links in this case, I can apply the classes to those links. So here’s the finished hCard.
<div class="bio vcard">
<h3>About the author</h3>
<p><span class="fn">Drew McLellan</span> is a web developer, author and
no-good swindler from just outside London, England.
At the <a class="org" href="http://www.webstandards.org/">Web Standards Project</a>
he works on press, strategy and tools. Drew keeps a
<a class="url" href="http://www.allinthehead.com/">personal weblog</a> covering web
development issues and themes.</p>
</div>
OK, that was easy. By just applying a few easy class names to the HTML I was already publishing, I’ve implemented an hCard that right now anyone with Greasemonkey can click to add to their address book, that Google and Yahoo! and whoever else can index and work out important things like which websites are associated with my name if they so choose (and boy, will they so choose), and in the future who knows what. In terms of effort, practically nil.
Where next?
So that was a trivial example, but to be honest it doesn’t really get much more complex even with the most pernickety permutations. Because hCard is based on vCard (a mature and well thought-out standard), it’s all tried and tested. Here’s some good next steps.
Play with the hCard Creator
Take a deep breath and read the spec
Start implementing hCard as you go on your own projects – it takes very little time
hCard is just one of an ever-increasing number of microformats. If this tickled your fancy, I suggest subscribing to the microformats site in your RSS reader to keep in touch with new developments.
What’s the take-away?
The take-away is this. They may sound like just more Web 2-point-HoHoHo hype, but microformats are a well thought-out, and easy to implement way of adding greater depth to the information you publish online. They have some nice benefits right away – certainly at geek-level – but in the longer term they become much more significant. We’ve been at this long enough to know that the web has a long, long memory and that what you publish today will likely be around for years. But putting the extra depth of meaning into your documents now you can help guard that they’ll continue to be useful in the future, and not just a bunch of flat ASCII. |
2005 |
Drew McLellan |
drewmclellan |
2005-12-06T00:00:00+00:00 |
https://24ways.org/2005/practical-microformats-with-hcard/ |
code |